summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/doc/fonts/doublestroke
diff options
context:
space:
mode:
authorKarl Berry <karl@freefriends.org>2006-12-01 00:45:08 +0000
committerKarl Berry <karl@freefriends.org>2006-12-01 00:45:08 +0000
commit44f4c86629dfa5824548dd517b2d5ad9eb83d5b9 (patch)
tree3d0a0e3abac931d6f1387b8afd175a09775c58cd /Master/texmf-dist/doc/fonts/doublestroke
parente7ebe52239446fc14659c9f283c5a0bf570cdf04 (diff)
update doublestroke for dstroke.map, Frank K msg 29 Nov 2006 10:12:34
git-svn-id: svn://tug.org/texlive/trunk@2568 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Master/texmf-dist/doc/fonts/doublestroke')
-rw-r--r--Master/texmf-dist/doc/fonts/doublestroke/dsdoc.dvibin16076 -> 0 bytes
-rw-r--r--Master/texmf-dist/doc/fonts/doublestroke/dsdoc.tex347
-rw-r--r--Master/texmf-dist/doc/fonts/doublestroke/readme125
3 files changed, 0 insertions, 472 deletions
diff --git a/Master/texmf-dist/doc/fonts/doublestroke/dsdoc.dvi b/Master/texmf-dist/doc/fonts/doublestroke/dsdoc.dvi
deleted file mode 100644
index 3ff1d81f01e..00000000000
--- a/Master/texmf-dist/doc/fonts/doublestroke/dsdoc.dvi
+++ /dev/null
Binary files differ
diff --git a/Master/texmf-dist/doc/fonts/doublestroke/dsdoc.tex b/Master/texmf-dist/doc/fonts/doublestroke/dsdoc.tex
deleted file mode 100644
index 9c6b3b4e9bd..00000000000
--- a/Master/texmf-dist/doc/fonts/doublestroke/dsdoc.tex
+++ /dev/null
@@ -1,347 +0,0 @@
-\documentclass[a4paper]{article}
-\usepackage{dsfont}
-
-% We need both the roman and the sans serif version of
-% the font in this document for example purposes.
-% Do not do this at home, unless you really know why.
-% Chances are you will not end up with a
-% masterpiece of digital typography.
-\DeclareMathAlphabet{\varmathds}{U}{dsss}{m}{n}
-
-\newcommand{\MF}{\textsf{Metafont}}
-
-\begin{document}
-
-\title{\bf The Doublestroke Font V1.111}
-
-\author{Olaf Kummer}
-
-\maketitle
-
-\section{Introduction}
-
-This font is useful for typesetting the mathematical
-symbols for the natural numbers ($\mathds{N}$),
-whole numbers ($\mathds{Z}$), rational numbers ($\mathds{Q}$),
-real numbers ($\mathds{R}$), complex numbers ($\mathds{C}$),
-and a couple of others which are sometimes needed.
-
-The easiest possibility to represent these sets using
-\TeX{} is to use boldface, where you get $\mathbf{N}$
-after entering \verb:$\mathbf{N}$:.
-
-Then one can assemble the glyphs from
-other ones. For example the expression \verb:$\mathrm{I\!N}$:
-yields $\mathrm{I\!N}$.
-
-The calligraphic symbol $\mathcal{N}$ generated by
-\verb:$\mathcal{N}$: is another option.
-
-But if none of the above suits your needs or
-personal taste, you should use a special font. These fonts
-are known as the blackboard bold fonts. There is a
-well-known font distributed by the AMS as
-\texttt{amsyb}, but the fonts
-\texttt{bbold} by Alain Jeffery and \texttt{bbm} by
-Gilles F.~Robert are viable options, too.
-
-And there is this font, too, which was designed
-to be as similar to the Computer Modern family of fonts
-by Donald E.~Knuth as possible. Which of these options you
-prefer is a matter of personal taste, so read on to find
-out whether you like this font.
-
-
-\section{License}
-
-You may use and distribute these fonts as you like.
-You may modify these fonts as long as you do not
-rename the files to one of those names that
-Donald E.~Knuth chose for the Computer Modern fonts.
-(And seriously, who would want to do that?)
-
-
-\section{Installation}
-
-Here are the instructions to install the doublestroke package.
-
-\begin{enumerate}
-\item If a previous version of this font is installed, remove all
-the files, especially the font files that were generated by
-\MF{} after the first installation.
-
-\item Depending on how you obtained this package it might be
-necessary to unpack/uncompress an archive. Now the files
-\begin{verbatim}
-dsdoc.dvi dsrom12.pfb dsss10.mf dsss8.tfm
-dsdoc.ps dsrom12.tfm dsss10.pfb dstroke.map
-dsdoc.tex dsrom8.mf dsss10.tfm readme
-dsfont.sty dsrom8.pfb dsss12.mf Udsrom.fd
-dsrom10.mf dsrom8.tfm dsss12.pfb Udsss.fd
-dsrom10.pfb dsrom.mf dsss12.tfm
-dsrom10.tfm dsromo.mf dsss8.mf
-dsrom12.mf dsromu.mf dsss8.pfb
-\end{verbatim}
-should be present.
-
-\item Make sure that you have \TeX, \LaTeX{} (with NFSS), and \MF{}
-installed. Make sure that \texttt{cmbase.mf} is accessible by \MF.
-
-\item Move the files to their destination.
-
-\begin{tabular}{lll}
-The files & are & and are needed by \\[1ex]
-\texttt{*.tfm} & font metric files & \TeX \\
-\texttt{*.fd} & font defintions & \TeX \\
-\texttt{*.sty} & style files & \TeX \\
-\texttt{*.mf} & \MF sources & \MF \\
-\texttt{*.pfb} & PostScript fonts & \TeX \\
-\texttt{*.map} & font map files & \texttt{dvips}, PDF\TeX
-\end{tabular}
-
-The exact location where the files belong depends on your
-installation. As a first approximation, install them
-near other files with the same extension.
-
-Unlike previous versions of this font, no pregenerated
-fonts at 300\,dpi are included, because
-these fonts should always be generated with the proper
-\MF{} mode. The metric files are included, however, because
-they do not depend on the printer.
-
-\item Verify the installation by generating this documentation
-file from its source \texttt{dsdoc.tex}. The resulting file
-\texttt{dsdoc.dvi} should be identical to this text.
-
-\item If you want to use the PostScript fonts, you have to make
- them known to \texttt{dvips} and/or PDF\TeX. The details of
- this process depend on your system installation. For example,
- if you are working in a Unix-style environment with a recent
- \TeX\ installation, you can configure \texttt{dvips} by setting
- the environment variable \texttt{DVIPSRC} to point to a
- configuration file \texttt{myconfig}, which would look as
- follows:
-\begin{verbatim}
-p +dstroke.map
-\end{verbatim}
- This will tell \texttt{dvips} to load the font map file.
- PDF\TeX\ looks for a configuration file called
- \texttt{pdftex.cfg}, into which you should put the line
-\begin{verbatim}
-map +dstroke.map
-\end{verbatim}
- for it to find the PostScript fonts.
-
- Note that for this to work, all files need to be put into their
- appropriate places. If you are unsure about where to put
- things, consult your system administrator or the manual of your
- \TeX\ system.
-\end{enumerate}
-
-You have probably done all of the above, because you are reading
-this documentation. But maybe you got this documentation from
-somewhere else and ran into trouble during the installation.
-In this case try the following:
-
-\begin{itemize}
-\item If \LaTeX{} complains about a missing input file, check whether
- the files \texttt{*.fd} and \texttt{*.sty} are accessible and readable.
-\item If \LaTeX{} complains about a missing font, check the
- placement of the files \texttt{*.tfm}.
-\item If \LaTeX{} issues strange errors, you might have an old version
- of \LaTeX{} or NFSS. Try using the fonts with low-level font
- commands instead of dsfont.sty and check the next item, too.
-\item If \LaTeX{} issues strange errors, the files might have been
- corrupted during transmission. Conversions of CR, LF, and
- so on might cause this problem.
-\item If the previewer or the printer driver complains about missing
- fonts and does not automatically call \MF{} to generate
- these font, either adapt your installation or generate
- the fonts by hand. Depending on your installation you
- must run something like
-\begin{verbatim}
-mf '\mode=localfont; input dsrom10'
-\end{verbatim}
- for each of the fonts.
-\item If \MF{} is called and complains about missing source
- files, check whether these (\texttt{*.mf}) are placed
- correctly.
-\item If \MF{} is called and complains about strange paths
- or about paths that do not intersect, you are probably
- generating the font at a lower resolution than 100\,dpi.
- There is little you can do except ignoring the errors or
- telling \MF{} to do so. Please report such errors only
- if they occur at resolutions above 100\,dpi.
-\item If the previewer or the printer driver complains about missing
- characters, check whether you have deleted all files from
- previous versions of this font.
-\item If the previewer or the printer driver complains about a
- checksum error, check whether you have deleted all files from
- previous versions of this font.
-\end{itemize}
-
-If that does not help and your friendly \TeX nician is unavailable,
-drop me a mail. I will try to help you, if time permits.
-
-
-\section{Usage}
-
-You can use the fonts with all versions of \TeX{} and \LaTeX,
-if you apply the low-level command \verb:\font:.
-For example we can write
-\begin{verbatim}
-\font\dsrom=dsrom10
-$$\hbox{\dsrom N}=\{0,1,2,\ldots\}$$
-$$\hbox{\dsrom ABCDEFGHIJKLMNOPQRSTUVWXYZ}$$
-\bye
-\end{verbatim}
-to obtain
-\[\mathds{N}=\{0,1,2,\ldots\}\]
-\[\mathds{ABCDEFGHIJKLMNOPQRSTUVWXYZ}\]
-using \TeX{} alone.
-If \LaTeX{} and NFSS are available as suggested in the installation
-section, you can use the style \texttt{dsfont} for an easier and more
-flexible approach. The style provides a single command \verb:\mathds:
-which can be used in math mode to typeset a doublestroke symbol.
-It use is similar to that of \verb:\mathbb: from the
-AMS package. For example
-\begin{verbatim}
-\documentclass{article}
-\usepackage{dsfont}
-\begin{document}
-\[\mathds{N}=\{0,1,2,\ldots\}\]
-\[\mathds{ABCDEFGHIJKLMNOPQRSTUVWXYZ}\]
-\end{document}
-\end{verbatim}
-will again result in
-\[\mathds{N}=\{0,1,2,\ldots\}\]
-\[\mathds{ABCDEFGHIJKLMNOPQRSTUVWXYZ}\]
-as we have already done in \TeX. The uppercase letters shown here
-are the most common, but there are a few others in use.
-\begin{verbatim}
-\[\mathds{1}\;\mathds{h}\;\mathds{k}\]
-\end{verbatim}
-results in
-\[\mathds{1}\;\mathds{h}\;\mathds{k}\]
-Why are the other lowercase letters and numerals missing? Well,
-they would be ugly if treated in the same way as the uppercase
-letters. Hence I considered the beauty of each individual letter
-more important than the completeness of the whole character set.
-Using \verb:\mathds{a}: we can get the letter $\mathds{a}$.
-This is the way the letter $\mathds{A}$ looked in previous versions
-of this font. It is provided in case somebody likes the old
-version better. The two other letters $\mathds{V}$ and $\mathds{W}$
-have changed significantly, too, but there will be nobody who
-prefers the old glyphs, I think.
-
-Let us look at some examples.
-\begin{verbatim}
-\[\mathds{N}\subset\mathds{Z}\subset\mathds{Q}
- \subset\mathds{R}\subset\mathds{C}\]
-\[\{a_i\}_{i\in\mathds{N}}\textrm{~where~}a_i\in\mathds{C}\]
-\[\forall x\in\mathds{X}:\exists s\in\mathds{S}:
- x\circ t\in\mathds{T}^\mathds{1}\]
-\end{verbatim}
-After running \LaTeX{} we get
-\[\mathds{N}\subset\mathds{Z}\subset\mathds{Q}
- \subset\mathds{R}\subset\mathds{C}\]
-\[(a_i)_{i\in\mathds{N}}\textrm{~where~}a_i\in\mathds{R}\]
-\[\forall x\in\mathds{X}:\exists s\in\mathds{S}:
- x\circ s\in\mathds{T}^\mathds{1}\]
-We can see that the font can occur in subscripts
-or superscripts without any problems.
-The last formula shows the possibility to use the
-doublestroke font for custom defined objects. Some caution is
-required here. Usually it is best to stick to those symbols
-whose usage is common, like the natural numbers $\mathds{N}$ etc.
-But there are reasons to use own glyphs, of course.
-
-Some people prefer a sans serif doublestroke font. This can be
-accomplished by a minimal change of the \TeX{} source.
-\begin{verbatim}
-\documentclass{article}
-\usepackage[sans]{dsfont}
-\begin{document}
-\[\mathds{N}=\{0,1,2,\ldots\}\]
-\[\mathds{ABCDEFGHIJKLMNOPQRSTUVWXYZ}\]
-\end{document}
-\end{verbatim}
-Did you spot the change? The result is
-\[\varmathds{N}=\{0,1,2,\ldots\}\]
-\[\varmathds{ABCDEFGHIJKLMNOPQRSTUVWXYZ}\]
-In this document I had to use both fonts for example purposes.
-Do not do this at home, unless you really know why.
-I discourage the simultaneous use of serif and
-sans serif doublestroke fonts in a single document, because
-it results in confused readers.
-
-
-\section{Changes}
-
-\subsection*{Changes in Version 1.0}
-
-\begin{itemize}
-\item The characters $\mathds{1}$, $\mathds{h}$, and $\mathds{k}$
-were added.
-
-\item The characters $\mathds{A}$, $\mathds{V}$, and $\mathds{W}$
-were completely redone.
-
-\item For several characters the size of the serifs was adjusted.
-
-\item Several characters were made more robust at low resolutions.
-In order to achieve this goal, the appearance of the letter
-$\mathds{S}$ had to be changed for some extreme parameter settings.
-
-\item The sans serif version of the font was added. The metaness
-required to generate a sans serif font was already present
-in the earlier version. The style file was rewritten to allow
-a choice between the two fonts.
-
-\item 8-point fonts for subscripts were added.
-
-\item The pregenerated fonts were removed from the distribution.
-
-\item This document was written.
-\end{itemize}
-
-
-\subsection*{Changes in Version 1.1}
-
-\begin{itemize}
-\item The license section was added.
-\end{itemize}
-
-
-\subsection*{Changes in Version 1.11}
-
-\begin{itemize}
-\item Documentation bugs were corrected
-\end{itemize}
-
-
-\subsection*{Changes in Version 1.111}
-
-\begin{itemize}
-\item PostScript versions of the fonts were added. These were
- generated from the \MF\ sources using the \texttt{mftrace}
- program by Han-Wen Nienhuys.
-\end{itemize}
-
-
-\section{Thanks}
-
-Thanks go to D.~E.~Knuth who gave \TeX, \MF, and
-Computer Modern to the world.
-Marco Kuhlmann added the PostScript version of the fonts
-and commented on the installation process.
-J\"urgen Vollmer provided some
-ideas that were used in this documentation file.
-Han-Wen Nienhuys created \texttt{mftrace}, which was
-required for creating PostScript versions of this font.
-Reinhard Zierke did not only provide the most complete
-\TeX{} installation I can imagine, but also
-motivated this improved version of the font.
-
-
-\end{document}
diff --git a/Master/texmf-dist/doc/fonts/doublestroke/readme b/Master/texmf-dist/doc/fonts/doublestroke/readme
deleted file mode 100644
index 89860688cf8..00000000000
--- a/Master/texmf-dist/doc/fonts/doublestroke/readme
+++ /dev/null
@@ -1,125 +0,0 @@
-
-Doublestroke Font V1.111 27th of August, 2002
-------------------------
-
-This font is based on the Computer Modern Roman family of fonts
-by D. E. Knuth. It is useful for typesetting the mathematical
-symbols for the natural numbers (N), whole numbers (Z),
-rational numbers (Q), real numbers (R) and complex numbers (C).
-
-
-License
--------
-
-You may use and distribute these fonts as you like.
-You may modify these fonts as long as you do not
-rename the files to one of those names that
-Donald E. Knuth chose for the Computer Modern fonts.
-(And seriously, who would want to do that?)
-
-
-How to Install
---------------
-
-1. If a previous version of this font is installed, remove all
-the files, especially the font files that were generated by
-Metafont after the first installation.
-
-2. Depending on how you obtained this package it might be
-necessary to unpack/uncompress an archive. Now the files
-
-dsdoc.dvi dsrom12.pfb dsss10.mf dsss8.tfm
-dsdoc.ps dsrom12.tfm dsss10.pfb dstroke.map
-dsdoc.tex dsrom8.mf dsss10.tfm readme
-dsfont.sty dsrom8.pfb dsss12.mf Udsrom.fd
-dsrom10.mf dsrom8.tfm dsss12.pfb Udsss.fd
-dsrom10.pfb dsrom.mf dsss12.tfm
-dsrom10.tfm dsromo.mf dsss8.mf
-dsrom12.mf dsromu.mf dsss8.pfb
-
-should be present.
-
-3. Make sure you have TeX, LaTeX (with NFSS), and Metafont
-installed. Make sure that cmbase.mf is accessible by Metafont.
-
-4. Move the files to their destination.
-
-The files are and are needed by
- *.tfm TeX font metric files TeX
- *.fd font defintions TeX
- *.sty style files TeX
- *.mf Metafont sources Metafont
-
-The exact location where the files belong depends on your
-installation. As a first approximation, install them
-near other files with the same extension.
-
-5. Verify the installation by generating the documentation.
-Run `latex dsdoc' and have a look at the file dsdoc.dvi which
-contains the documentation and usage samples.
-
-6. If you want to use the PostScript fonts, you have to make
-them known to dvips and/or PDFTeX. The details of
-this process depend on your system installation,
-typically using the mapping information from the
-file dstroke.map and following further instructions
-contained in the main manual.
-
-7. After reading the examples in the file dsdoc you can
-use the fonts in your own documents.
-
-
-
-After the Installation
-----------------------
-
-Do not worry, most installations complete without any problems.
-However, if the procedure described above does not work, I suggest
-the following actions:
- - If LaTeX complains about a missing input file, check whether
- the files *.fd and *.sty are accessible and readable.
- - If LaTeX complains about a missing font, check the
- placement of the files *.tfm .
- - If LaTeX issues strange errors, you might have an old version
- of LaTeX or NFSS. Try using the fonts with low-level font
- commands instead of dsfont.sty and check the next item, too.
- - If LaTeX issues strange errors, the files might have been
- corrupted during transmission. Conversions of CR, LF, and
- so on might cause this problem.
- - If the previewer or the printer driver complains about missing
- fonts and does not automatically call Metafont to generate
- these font, either adapt your installation or generate
- the fonts by hand. Depending on your installation you
- must run something like
- mf '\mode=localfont; input dsrom10'
- for each of the fonts.
- - If Metafont is called and complains about missing source
- files, check whether these (*.mf) are placed correctly.
- - If Metafont is called and complains about strange paths
- or about paths that do not intersect, you are probably
- generating the font at a lower resolution than 100 dpi.
- There is little you can do except ignoring the errors or
- telling Metafont to do so. Please report such errors only
- if they occur at resolutions above 100 dpi.
- - If the previewer or the printer driver complains about missing
- characters, check whether you have deleted all files from
- previous versions of this font.
- - If the previewer or the printer driver complains about a
- checksum error, check whether you have deleted all files from
- previous versions of this font.
-
-If that does not help and your friendly TeXnician is unavailable,
-drop me a mail. I will try to help you, if time permits.
-
-I am always glad to hear about improvements and bug reports,
-general comments are appreciated, too.
-
-Olaf Kummer
-
-Universitaet Hamburg
-Fachbereich Informatik -- Arbeitsbereich TGI
-Vogt-Koelln-Strasse 30
-22527 Hamburg (Germany)
-
-mailto:kummer@informatik.uni-hamburg.de
-http://www.informatik.uni-hamburg.de/TGI/mitarbeiter/wimis/kummer.html