sync symlinks which changed after the build announcement:

ebong -> ../../texmf-dist/scripts/bengali/ebong.py
pdfatfi -> ../../texmf-dist/scripts/oberdiek/pdfatfi.pl
simpdftex -> ../../texmf/scripts/simpdftex/simpdftex
texluac -> luatex

except for i386-openbsd (too many missing files, and some junk files), and 4 archs not yet rebuilt


git-svn-id: svn://tug.org/texlive/trunk@8576 c570f23f-e606-0410-a88d-b1316a301751

1 files changed, 1 insertions, 654 deletions

diff --git a/Master/bin/alpha-linux/simpdftex b/Master/bin/alpha-linux/simpdftex
index e5d5d4218b3..8b9c2132185 100755..120000
--- a/Master/bin/alpha-linux/simpdftex
+++ b/Master/bin/alpha-linux/simpdftex
@@ -1,654 +1 @@
-#!/bin/sh
-
-# Created by Gerben Wierda, May 2001
-# Rewritten by Gerben Wierda, January 2002
-# Modified by Joachim Kock, May 2003
-# Modified by Gerben Wierda, April 2007
-
-# COPYRIGHT Gerben Wierda 2001--2004
-# This file is free software. You are free to use this file in any way you like
-# However, if you change it you should note in this file that you did and who
-# you are, you also need to change the version string if you do. That way
-# I will not get support questions for software that is not entirely mine.
-
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-# EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
-# INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-# LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR
-# PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-# LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-# NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-# EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-# $Id: altpdftex,v 2.18 2004/11/15 20:36:11 gerben Exp $
-
-# This script assumes that there is a config.pdf somewhere that sets
-# the bitmap mode to something large but realistic (real mode) so that
-# unavailable pfb fonts will be included as bitmaps.
-
-# Version 1.0:	added the string above for identification purposes
-# Version 1.0a:	Cosmetic change: do not display dir of argv[0] all the time
-#		Added calledas variable to hold command basename
-# Version 1.1:	Use calledas instead of $0 which means the sed command
-#		for determining format below also works when there is no dir
-#		(run from dir where altpdftex resides, not very likely...)
-# Version 1.2:	Force the use of tex binaries from the same directory as
-#		this script
-# Version 1.3:  Added --echo-version option, placed argument check after
-#		switch, inside while to prevent subscript out of range error
-#		Added --tex-path to override directory where this script
-#		resides. Added --gs-path to override a new default gs
-#		directory /usr/local/bin. Also, force gs directory at the
-#		start of the path to repair for broken installations of
-#		TeX, gs and such
-# Version 1.4:	Moved path changes to just before calling gs so that only
-#		ps2pdf is affected
-# Version 1.5:	Removed some path-related redundancy from GS calling
-# Version 1.5a:	Missing ${extradviopts} from echo
-#		Added version to --help output
-#		Added wolfram.map
-# Version 1.6:	Fixed bug: --dviopts did not work because it did set
-#		the wrong variable
-#		Changed dviopts to dvipsopts (better name)
-# Version 1.7:	Added --distiller and --distiller-filter option
-#		Changed --gs-path to --distiller-path
-#		Changed distiller semantics
-#		Fixed bug --tex-path flag needed trailing '/'
-#		Some extra quoting to be more robust for whitespace
-#		in names, also internally
-# Version 1.8:	Added pstill and u-psbuild info to help
-# Version 1.9:	Removed textrace bbold font (textrace is broken)
-# Version 1.10:	Added amstex support
-#		Simplified different format support
-# Version 1.11:	Do not source ~/.{t}cshrc, use the environment 'as is'
-#		Version 1.11 says it is version 1.10!
-# Version 1.12: Added textrace bold font (textrace 0.48 is ok)
-# Version 1.13:	Changed success message at the end
-#		Echo version on by default
-#		Debug option
-# Version 1.13b:Date report on version was very out of date, removed
-
-# Version 2.0:	Rewritten in /bin/sh because (t)csh does not handle signals
-#		very well...
-#		This version works, but you need to send the SIGTERM to
-#		the process group (the negative PID) to get it to work
-# Version 2.1:	Small bug fixes
-# Version 2.2:	Fixed bug where argument without extension was interpreted
-#		as dvi file.
-#		Removed dependencies on smart sh versions
-# Version 2.3:	Removed map file knowledge (needs to be outside this script)
-#		beyond the standard map files
-# Version 2.4:	Added support for omega and lambda (use odvips)
-# Version 2.5:	Changed maxpk and maxpfb implementation to recent updmap
-# Version 2.6:	Use ps2pdf13 as the default distiller
-# Version 2.7:	Changed help
-# Version 2.8:	Checked into CVS.
-#		Added handling of outdir for TeX
-# Version 2.9:	Added auto-outdir flag
-# Version 2.10:	Changed --outdir behaviour to mimick TEXMFOUTPUT,
-#		removed --auto-outdir
-# Version 2.11:	Fixed typo
-# Version 2.12:	RCS changes, from now on, the version number is the RCS number
-#		These notes here will become a ChangeLog.
-# 2003/05/20	Joachim's modification: write first to a pdf file in tmp, 
-#		and only upon completion copy the file to its final
-#		destination.  This is done in order to minimise the time where
-#		the pdf file in current directory is in an unstable state,
-#		because a PDF viewer might be tracking the file, and 
-#		if it finds the pdf file in an intermediate state it will
-#		display a blank page until the new version is ready.
-# 2003/05/21	Joachim's modification used /bin/cp. Gerben made it truly
-#		atomic by using /bin/cp in combination with /bin/mv
-# 2003/11/23	Added supportfor passing flasg to tex at the request of
-#		Dick Koch.
-# 2004/09/05	Bugfix: make it work better with directories with whitespace
-#		in their name
-# 2004/11/15	New calling mode: simpdftex format foo.tex
-#		e.g.:
-#			simpdftex latex foo.tex
-#		In the future, the old modes (altpdflatex and friends) through
-#		symlinks will disappear from my distribution, though they will
-#		still work.
-# 2007/05/07	Added dvipdfm support with compatibility with the patched version
-#		that is available on the net (simpdftex_dpmx)
-#		Changed version string to date-based string
-# 2007/08/09	Protected echo command against broken builtin versions by running
-#		/bin/echo explicitly. There may exist /bin/echo implementations
-#		that do not support -n and this script will have to be changed
-#		before it works on such a system
-
-# FEATURE: it seems -u +foo.map -u -foo.map does not work. So --extradvipsopts
-# cannot be used to remove a map from the standard list
-
-# BUG: Handling of file name extensions is not completely equialent to TeX
-# i.e. foo.bar.bla gets you foo.bar.pdf not foo.bar.bla.pdf
-# Hint: Give all extensions explicitely on the command line
-
-version='20070809'
-calledas=`basename "$0"`
-if [ "${calledas}" = "simpdftex" ]
-then
-	argwithoutlead=`/bin/echo -n "$1"|sed 's/^--//'`
-	if [ "$1" != "" -a "$1" = "${argwithoutlead}" ]
-	then
-		formatname="$1"
-		shift
-		calledas="altpdf${formatname}"
-	fi
-fi
-argvbackup="$*"
-
-dviprogram="dvips" # Might be dvips, dvipdfm or dvipdfmx
-
-# maxpkdvipsopts: use only pfb's for real PS fonts, bitmaps are default for the others
-maxpkdvipsopts="-Ppk"
-# maxpfbdvipsopts: use as many pfb's as possible
-maxpfbdvipsopts="-Poutline"
-opt_dvipsopts=""
-
-# Defaults:
-# altpdftex --default is the default setting, it also works
-# when there is no config.pdf file
-extradvipsoptions=""
-dvipsoptions="$maxpfbdvipsopts"
-outputpostfix=".maxpfb"
-simplename="yes"
-keeppsfile="no"
-echoversion="yes"
-texpath=`dirname "$0"`
-# Default distiller is ps2pdf from /usr/local/bin in no filter mode
-# as the direct call to a filtering gs does not work yet for some reason
-#distillerpath=""
-#distillerprog="/usr/local/bin/gs -dCompatibility=1.3 -q -dNOPAUSE -dBATCH -sDEVICE=pdfwrite -sOutputFile=- -c save pop"
-#distillerfilter="yes"
-distillerpath="/usr/local/bin"
-distillerprog="ps2pdf13"
-distillerfilter="no"
-unset outdir
-debug="no"
-dvipdfmoptions=""
-
-usage()
-{
-	cat <<_eof_help
-This is simpdftex, $version
-
-Usage: simpdftex formatname [--mode modestring]
-	[--dvipsopts dvipsoptstring] [--extradvipsopts dvipsoptstring] [--pdf]
-	[--default] [--maxpk] [--maxpfb] [--extendedname] [--no-echo-version]
-	[--tex-path dir] [--keep-psfile] [--distiller-path dir] [--debug]
-	[--distiller prog] [--distiller-filter prog] [--help]
-	[--outdir dir] [--extratexopts texoptsstring]
-	[--dvipdfmopts dvipdfmoptstring] tex-or-dvi-file
-
-simpdftex is a way to do pdf{e}{la}tex without having pdf{e}{la}tex. It needs a
-working TeX environment and one of three ways to turn  DVI file into PDF:
-	- dvips + a distiller like ghostscript
-	- dvipdfm
-	- dvipdfmx
-Since pdf{e}{la}tex cannot handle insertion of .eps graphics, simpdftex gives an
-alternative when using dvips mode. The output for both systems is comparable.
-
-simpdftex compiles the file with {LA}TeX, processes the DVI file with dvips into
-PostScript and uses gs to produce pdf (with ps2pdf). Or it uses dvipdfm or
-dvipdfmx to turn the DVI file into PDF. There is finegrained control over the
-resulting filename and the options with which dvips produces the PostScript
-intermediary file.
-
-Dvips will call Metafont to produce bitmaps or include PostScript .pfb files
-depending on the flags. See below.
-
-The default setting is normal name, maximal use of pfb's, just like pdf{la}tex,
-in other words, "pdftex file.tex" and "altpdftex file.tex" both produce an
-output file file.pdf. For pdftex, output options are controlled by pdftex.cfg,
-for altpdftext by config.ps (unless --pdf is given).
-
-Arguments:
-	tex-or-dvi-file
-		If a .dvi file is given, skip the TeX process. Otherwise, TeX
-		the input file, dvips the resulting dvi file and ps2pdf the
-		resulting ps file
-	--mode
-		Tell simpdftex how to go from DVI to PDF. There are three modes:
-		- dvips
-		- dvipdfm
-		- dvipdfmx
-	--dpx
-		Compatibility flag with simpdftex_dpmx. Equal to --mode dvipdfmx
-	--dpm
-		Compatibility flag with simpdftex_dpmx. Equal to --mode dvipdfm
-	--help
-		Display this message and exit
-	--no-echo-version
-		Do not echo location and version of this script. Does not exit
-		so can be used tochange info to the output of a real run
-	--debug
-		Add some debug output
-	--extendedname
-		Depending on the mode, adds intermediary extensions to the
-		output filename. If the mode is --pdf, .pdfmode is added. If
-		the mode is --maxpk, ,maxpk is added and if the mode is
-		--maxpfb, .maxpfb is added. Example:
-			tex-or-dvi-file-basename.maxpfb.pdf
-	--maxpk
-		Use Metafont bitmaps (pk files) when possible. Only real
-		PostScript fonts (like Times Roman) are included as
-		PostScript fonts. All other fonts are included as bitmaps
-		for the default printer resolution. This options produces
-		optimal results for the chosen printer.
-		For file contents (not name) equivalent to:
-		--dvipsopts "-Ppk"
-		Not yet functional for the other modes.
-	--maxpfb
-		Use PostScript pfb files whenever possible. This produces
-		optimal results for the screen.
-		For file contents (not name) equivalent to:
-		--dvipsopts "-Poutline"
-		If any font is included as TeX pk bitmap, it is rendered
-		at the default resolution.
-		Not yet functional for the other modes.
-	--pdf
-		Select .pdfmode extension for the output file name if
-		--extendedname has been set. Use printer definition
-		config.pdf. For file contents (not name) equivalent to
-		--dvipsopts "-Ppdf"
-		Note that the default config.pdf assumes resolution 8000
-		for bitmaps and bitmap generation fails at this resolution
-		because there exists no known mode for that resolution.
-	--default
-		Select no extension for the output file name, even if
-		--extendedfilename has been set. Use standard printer
-		definition config.ps. For file contents (not name) equivalent
-		to:
-		--dvipsopts "" --noextendedname
-	--dvipsopts
-		Give arbitrary arguments to dvips, e.g.
-		--dvipsopts "-M"
-		Sets extension for --extendedfilename to .custom. --dvipsopts
-		overrides other flags that set dvipsopts.
-	--extratexopts
-		Give extra arbitrary arguments to tex, e.g.
-		--extratexopts "--interaction=nonstopmode"
-		Sets extra options for the tex command that is used.
-	--extradvipsopts
-		Give extra arbitrary arguments to dvips, e.g.
-		--extradvipsopts "-M"
-		Sets extra options for dvips and does not set extension
-		or override other options. Options will be added to the end
-		of the options for dvips
-	--keep-psfile
-		After running dvips, copy the ps file over to the directory
-		where the tex file is, possibly overwriting a ps file
-		that is there. Use with caution, a ps file could be input
-		as well.
-	--tex-path
-		Give path of TeX binaries, use directory of this script
-		otherwise
-	--distiller prog
-		Use a distiller different from ps2pdf which is the default.
-		Argument must be an executable or executable script that
-		gets called iwth two arguments: input file (PS) and output
-		file (PDF). E.g.:
-		--distiller=/usr/local/alternate/bin/ps2pdf
-		--distiller=pstill
-		Using this flag sets the distiller filter mode to off
-		This flag only makes sense in dvips mode
-	--distiller-filter prog
-		Use a distiller executable or executable script which is
-		called with the PS input as standard input and which writes
-		the PDF output to standard output. E.g.:
-		--distiller-filter=u-psbuild
-		This flag only makes sense in dvips mode
-	--distiller-path
-		Give path needed by the distiller binary. This path is added
-		to the begin of you PATH environment before the distiller is
-		run. The reason is that for instance ps2pdf uses the path to
-		find gs and sets the path to something with /sw/bin at the
-		beginning.  Thus, installing gs from fink would make
-		/usr/local/bin/ps2pdf find another gs than intended. By giving
-		an empty path, the path is not changed before the distiller
-		program is run. The default is empty.
-		This flag only makes sense in dvips mode
-	--dvipdfmopts
-		Give arbitrary arguments to dvipdfm or dvipdfmx, e.g.
-		--dvipdfmopts "-c"
-		Sets extension for --extendedfilename to .custom. --dvipdfmopts
-		overrides other flags that set dvipdfmopts.
-	--outdir dir
-		Write files here *if* our current directory is unwritable. This
-		mimicks the TEXMFOUTPUT environment variable of TeX, but
-		differently. The current dir becomes the value of --outdir and
-		the directory where the old current dir is added to TEXINPUTS.
-		This is more robust for reading and locating files.
-		You can also set TEXMFOUTPUT instead, but with a disadvantage:
-		you will be running TeXin the current dir. And you will not be
-		able to read files in the outdir unless you also adapt
-		TEXINPUTS.
-
-	The defaults for the distiller are
-		Path addition: "${distillerpath}"
-		Filter mode: "${distillerfilter}"
-		Program: "${distillerprog}"
-
-	Later flags override settings of earlier flags.
-_eof_help
-}
-
-while test $# -gt 0
-do
-	case $1 in
-	--help)
-		usage
-		exit 0;;
-	--dvipsopts)
-		shift
-		outputpostfix=".custom"
-		dvipsoptions="$1"
-		;;
-	--dvipdfmopts)
-		outputpostfix=".custom"
-		shift
-		dvipdfmoptions="$1"
-		;;
-        --dvipdfopts)	# Compatibility with simpdftex_dpmx
-		shift
-		dvipdfmoptions="$1"
-		;;
-	--extradvipsopts)
-		shift
-		extradvipsoptions="$1"
-		;;
-	--extratexopts)
-		shift
-		extratexoptions="$1"
-		;;
-	--tex-path)
-		shift
-		texpath="$1"
-		;;
-	--pdf)
-		outputpostfix=".pdfmode"
-		dvipsoptions="-P pdf"
-		;;
-	--default)
-		outputpostfix=""
-		dvipsoptions=""
-		# Use the default print option in config.ps
-		;;
-	--maxpk)
-		outputpostfix=".maxpk"
-		dvipsoptions="$maxpkdvipsopts"
-		;;
-	--maxpfb)
-		outputpostfix=".maxpbfb"
-		dvipsoptions="$maxpfbdvipsopts"
-		;;
-	--extendedname)
-		simplename="no"
-		;;
-	--keep-psfile)
-		keeppsfile="yes"
-		;;
-	--debug)
-		debug="yes"
-		;;
-	--distiller-path)
-		shift
-		distillerpath="$1"
-		;;
-	--distiller)
-		shift
-		distillerprog="$1"
-		distillerfilter="no"
-		;;
-	--mode)
-		shift
-		if [ "$1" = "dvips" -o "$1" = "dvipdfm" -o "$1" = "dvipdfmx" ]
-		then
-			dviprogram="$1"
-		else
-			/bin/echo "Unknown mode $1"
-			exit 1
-		fi
-		;;
-	--outdir)
-		shift
-		export TEXINPUTS=`pwd`:`kpsewhich --expand-var '$TEXINPUTS'`
-		export TEXMFOUTPUT="$1"
-		outdir="$1/"
-		outdirset="yes"
-		cd "$1"
-		;;
-	--distiller-filter)
-		shift
-		distillerprog="$1"
-		distillerfilter="yes"
-		;;
-	--no-echo-version)
-		echoversion="no"
-		;;
-        --dpx)	# Compatibility with simpdftex_dpmx
-                dviprogram="dvipdfmx"
-                ;;
-        --dpm)	# Compatibility with simpdftex_dpmx
-                dviprogram="dvipdfm"
-                ;;
-	--*)
-		/bin/echo "Unknown option $1"
-		exit 1;;
-	"")
-		;;
-	*)
-		break;;
-	esac
-	shift
-done
-
-if [ "${echoversion}" = "yes" -a "${debug}" = "no" ]
-then
-	/bin/echo "### This is $0, Version ${version}"
-fi
-
-if [ "${debug}" = "yes" ]
-then
-	/bin/echo "##### This is $0, Version ${version}"
-	/bin/echo "##### Arguments: ${argvbackup}"
-fi
-
-run_dvipdfm()
-{
-	/bin/echo "### ${texpath}/${dviprogram} ${dvipdfmoptions} -o ${pdffile} ${dvifile}"
-	"${texpath}/${dviprogram}" ${dvipdfmoptions} -o "${pdffile}" "${dvifile}" || \
-		{ /bin/echo "### FAILED to generate ${pdffile} (${status})"; \
-		  exit 1; }
-}
-
-run_dvips()
-{
-	/bin/echo "### ${texpath}/${dviprogram} -R ${dvipsoptions} ${extradvipsoptions} -o ${psfile} ${dvifile}"
-	"${texpath}/${dviprogram}" -R ${dvipsoptions} ${extradvipsoptions} -o "${psfile}" "${dvifile}" || \
-		{ /bin/echo "### FAILED to generate ${psfile} (${status})"; \
-		  exit 1; }
-
-	if [ "${keeppsfile}" = "yes" ]; then
-		/bin/echo "### Saving intermediary ps file ${psfile} as ${savedpsfile}"
-		/bin/cp "${psfile}" "${savedpsfile}" || \
-			/bin/echo "### FAILED to save ${psfile} (${status})"
-	fi
-
-	if [ "${distillerpath}" != "" ]; then
-		PATH="${distillerpath}:${PATH}";export PATH
-		if [ "${debug}" = "yes" ]; then
-			/bin/echo "##### PATH set to ${PATH}"
-		fi
-	fi
-
-	if [ "${distillerfilter}" = "yes" ]; then
-		/bin/echo "### ${distillerprog} <${psfile} >${pdffile}"
-		"${distillerprog}" <"${psfile}" >"${pdffile}" || \
-			{ /bin/echo "### FAILED to generate ${pdffile} (${status})"
-			  exit 1; }
-	else
-		/bin/echo "### ${distillerprog} ${psfile} ${pdffile}"
-		"${distillerprog}" "${psfile}" "${pdffile}" || \
-			{ /bin/echo "### FAILED to generate ${pdffile} (${status})"
-			  exit 1; }
-	fi
-}
-
-cleanup()
-{
-	if [ "${tmpdir}" != "" -a "${debug}" = "no" ]
-	then
-		rm -rf "${tmpdir}"
-	fi
-}
-
-terminated()
-{
-	cleanup
-	exit 1;
-}
-
-trap 'terminated' 15
-
-main()
-{
-	if [ "${file}" = "" ]
-	then
-		/bin/echo "simpdftex Empty argument: tex-or-dvi-file-name"
-		exit 1
-	fi
-
-	# Argument handling
-
-	if [ "${simplename}" = "yes" ]
-	then
-		outputpostfix=""
-	fi
-
-	startwithdvi="no"
-	basename=`basename "${file}"`
-	nosuffixbasename=`/bin/echo -n ${basename}|sed 's/\.[^.]*$//'`
-	nodvisuffixbasename=`/bin/echo -n ${basename}|sed 's/\.[dD][vV][iI]$//'`
-	if [ "${nodvisuffixbasename}" = "${nosuffixbasename}" -a \
-		"${basename}" != "${nosuffixbasename}" ]
-	then
-		startwithdvi="yes"
-	fi
-
-	kpsefilename=`kpsewhich "${file}"`
-	slashdirname=`dirname "${kpsefilename}"`/
-
-	if [ ! -w "." ]
-	then
-		if [ "${TEXMFOUTPUT}" != "" ]
-		then
-			outdir="${TEXMFOUTPUT}/"
-			outdirset="yes"
-			if [ "${autoinput}" = "yes" ]
-			then
-				export TEXINPUTS=${TEXMFOUTPUT}:`kpsewhich --expand-var '$TEXINPUTS'`
-
-			fi
-		else
-			/bin/echo "### Cannot write in current directory and no redirect found. Bailing out..."
-			exit 1
-		fi
-	fi
-
-	# Assume the command is called altpdf* where the rest is the actual tex
-	# program to be run
-	texprogram=`/bin/echo ${calledas}|sed 's/altpdf//'`
-	if [ "${texprogram}" = "omega" -o "${texprogram}" = "lambda" ]
-	then
-		dvips="odvips"
-	else
-		dvips="dvips"
-	fi
-
-	# Handle temp dir (cleanup is called on signal)
-	tmpext=$$-`/bin/date +"%s"`
-	tmpdir="/tmp/altpdf${texprogram}.${tmpext}"
-	# Force removal of possible existing tmpdir
-	cleanup
-	# Make new version
-	mkdir "${tmpdir}"
-
-	if [ "${startwithdvi}" = "yes" ]
-	then
-		dvifile="${file}"
-	else
-		texfile="${file}"
-		dvifile="${outdir}${nosuffixbasename}.dvi"
-	fi
-
-	psfile="${tmpdir}/${nosuffixbasename}${outputpostfix}.ps"
-	savedpsfile="${outdir}${nosuffixbasename}.ps"
-	pdffile="${tmpdir}/${nosuffixbasename}${outputpostfix}.pdf"
-	savedpdffile="${outdir}${nosuffixbasename}${outputpostfix}.pdf"
-
-	if [ "${debug}" = "yes" ]
-	then
-		/bin/echo "##### TeX file: $texfile"
-		/bin/echo "##### DVI file: $dvifile"
-		if [ "${dviprogram}" = "dvips" ]
-		then
-			/bin/echo "##### PS file: $psfile"
-			/bin/echo "##### Saved PS file: $savedpsfile"
-		fi
-		/bin/echo "##### Created PDF file: $pdffile"
-		/bin/echo "##### Final PDF file: $savedpdffile"
-		/bin/echo "##### Environment:"
-		env | sed 's/^/##### /g'
-	fi
-
-	if [ "${startwithdvi}" = "yes" ]; then
-		/bin/echo "### Skipping ${texprogram} ${texfile} [dvi->pdf only]"
-	else
-		/bin/echo "### ${texpath}/${texprogram} ${texfile}"
-		"${texpath}/${texprogram}" ${extratexoptions} "${texfile}" || \
-			/bin/echo "### WARNING: TeX returned non zero exit status ${status}"
-	fi
-
-	case "${dviprogram}" in
-	"dvips")
-		run_dvips;;
-	"dvipdfm")
-		run_dvipdfm;;
-	"dvipdfmx")
-		run_dvipdfm;;
-	*)
-		/bin/echo "### ERROR: wrong dvipdf mode ${dviprogram}"
-	esac
-
-	/bin/echo "### Copying/moving pdf file ${pdffile} to ${savedpdffile}"
-	/bin/cp "${pdffile}" "${savedpdffile}.${tmpext}" || \
-		/bin/echo "### FAILED to copy ${pdffile} (${status})"
-	/bin/rm -f "${savedpdffile}"
-	/bin/mv "${savedpdffile}.${tmpext}" "${savedpdffile}" || \
-		/bin/echo "### FAILED to rename ${savedpdffile}.${tmpext} (${status})"
-
-	if [ "${startwithdvi}" = "yes" ]; then
-		if [ "${keeppsfile}" = "yes" ]; then
-			/bin/echo "### Succesfully generated ${savedpdffile} and ${savedpsfile}"
-		else
-			/bin/echo "### Succesfully generated ${savedpdffile}"
-		fi
-	else
-		if [ "${keeppsfile}" = "yes" ]; then
-			/bin/echo "### Succesfully generated ${dvifile}, ${savedpdffile} and ${savedpsfile}"
-		else
-			/bin/echo "### Succesfully generated ${dvifile} and ${savedpdffile}"
-		fi
-	fi
-
-	cleanup
-}
-
-for file in "$@"
-do
-	main
-done
+../../texmf/scripts/simpdftex/simpdftex
\ No newline at end of file