summaryrefslogtreecommitdiff
path: root/Build
diff options
context:
space:
mode:
authorKarl Berry <karl@freefriends.org>2021-05-04 22:31:39 +0000
committerKarl Berry <karl@freefriends.org>2021-05-04 22:31:39 +0000
commiteb6363534f301e2f988315c0cd6215b2f6cfc150 (patch)
tree32e31c3635cafbc156c0b711c3804f7f546e9a8f /Build
parent79249345968fdf93852a9d6288e11ed512f00847 (diff)
latexmk (5may21)
git-svn-id: svn://tug.org/texlive/trunk@59081 c570f23f-e606-0410-a88d-b1316a301751
Diffstat (limited to 'Build')
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/latexmk/latexmk.pl512
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/texlive/tlmgr.pl36
-rwxr-xr-xBuild/source/texk/texlive/linked_scripts/texlive/updmap.pl87
3 files changed, 307 insertions, 328 deletions
diff --git a/Build/source/texk/texlive/linked_scripts/latexmk/latexmk.pl b/Build/source/texk/texlive/linked_scripts/latexmk/latexmk.pl
index 1ef32d985ef..afa5cdcd594 100755
--- a/Build/source/texk/texlive/linked_scripts/latexmk/latexmk.pl
+++ b/Build/source/texk/texlive/linked_scripts/latexmk/latexmk.pl
@@ -26,141 +26,38 @@
##
##
##
-## Modification log from 1 Jan 2020 onwards in detail
+## Modification log from 14 Apr 2021 onwards in detail
##
+## 3 May 2021 John Collins Minor corrections
+## 30 Apr 2021 John Collins Revert the change of 14-15 Apr, by removing the
+## of cwd(). That gave sometimes obnoxiously slow
+## parsing of big log files, because of the slowness
+## of large number of calls to cwd() caused by calls
+## to sub normalize_filename. I think I am mistaken
+## that cwd() could possibly give a different result
+## than getcwd(), whose cached result is used by
+## my goodcwd(). That idea was my motivation on 14 Apr.
+## 22 Apr 2021 John Collins Clean up aux and out_dir code.
+## 21 Apr 2021 John Collins Clean up some comments
+## Add in emulation of -aux-directory. On by
+## default.
+## 20 Apr 2021 John Collins Add -dALLOWPSTRANSPARENCY option to ps2pdf and
+## dvi2pdf. That avoids problems with recent
+## ghostscript versions when, e.g., pstricks is used.
+## 16 Apr 2021 John Collins Better normalization of aux_dir and out_dir, so
+## that TEXMFOUTPUT, and the source and dest names for bibtex
+## and makeindex allow them to work always when the aux_dir
+## is **not** below cwd, at least under TeX Live. With MiKTeX
+## bibtex works even without special precautions for aux_dir
+## not below cwd. But makeindex doesn't work in this case,
+## even if TEXMFOUTPUT is set correctly.
## 14-15 Apr 2021 John Collins In normalize_filename, try both good_cwd() and
## cwd() for removing directory component.
-## That improves clean up.
-## V. 4.72b
-## 14 Apr 2021 John Collins Allow index instead of makeindex in indexfudge options
-## 12 Apr 2021 John Collins Start to fix bug on not-found files with out_dir = .
-## 11 Apr 2021 John Collins V. 4.72a.
-## Modify contents of minimal aux file.
-## 9 Apr 2021 John Collins Correct bug that if on one run of latexmk a
-## missing file was detected and the file was
-## later created, then a subsequent run of latexmk
-## didn't cause a recompilation. The cause was an
-## error in latexmk's initialization of its file
-## database.
-## V. 4.72.
-## 12 Jan 2021 John Collins Correct parse_log
-## 28 Dec 2020 John Collins Process -output-format=fmt option rather than passing it to *latex
-## 26-27 Dec 2020 John Collins Deal with bug exposed by chapterbib. (It involved
-## incorrect attempt to deal with filenames specified
-## relative to aux_dir.
-## 14 Dec 2020 John Collins Try to solve problems of normalization of source
-## name and general normalization of file names.
-## 10 Dec 2020 John Collins Set up run_makeindex and $makeindex_fudge, just as
-## for bibtex, and corresponding CL options.
-## Revert changes to normalize_filename, they aren't
-## needed any more.
-## Normalize filenames in rdb_ensure_file.
-## 25 Nov 2020 John Collins Revert to default $bibtex_fudge to 1
-## Rationale:
-## There are enough annoying security-related
-## complications in many cases concerning
-## filenames with a path component given to
-## bibtex, that it is better to do the cd trick
-## by default. In addition there are some
-## interesting incompatibilities between TeXLive
-## and MiKTeX. In the rare (I suspect) cases
-## where the fudge fails, the user can always
-## turn it off, of course.
-## I should do same fudge for makeindex.
-## Comment out warning when bibtex fudge is used.
-## 18 Nov 2020 John Collins Add options -bibtexfudge, -bibtexfudge-, -nobibtexfudge,
-## so that the options are in agreement with documentation
-## including historical versions.
-## Set environmnent variable TEXMFOUTPUT to the
-## aux_dir. This solves problem that bibtex and
-## makeindex sometimes cannot write to the
-## aux_dir (for their log and output files). This
-## problem occurs notably when the aux_dir is
-## specified by an absolute path to a directory that
-## is not a subdirectory of the cwd.
-## 12 Nov 2020 John Collins Correct some aliasing of filenames.
-## 11 Nov 2020 John Collins Remove some messages.
-## Don't allow log file as a source.
-## 2 Nov 2020 John Collins Refuse to allow main pdf file or main output file to
-## be source of a primary rule, and give warning
-## about it. (Concerns at least hyperxmp (2020/10/05 v. 5.6;
-## this accesses file system metadata, specifically file size,
-## and the fls file therefore lists the pdf file as a source.
-## This generally leads to an infinite loop, without a special
-## a configuration.) Hyperxmp v. 5.7 2010/11/01 doesn't give
-## this problem. But the test is still good to have.
-## 23 Oct 2020 John Collins Fix incorrect $/ in reading rc files
-## 10-15 Oct 2020 John Collins Correct bug in normalizing filename
-## Give .latexmkrc priority over latexmkrc in cwd
-## 8 Oct 2020 John Collins Restore use Cwd "chdir";. There's no longer
-## a problem with cd
-## 7 Oct 2020 John Collins Extra diagnostics for reporting normalized aux/out dirs
-## 6 Oct 2020 John Collins Better normalize etc.
-## 1 Oct 2020 John Collins Improve some messages.
-## 30 Sep 2020 John Collins V. 4.70c.
-## Clean up some comments.
-## 29 Sep 2020 John Collins V. 4.70b.
-## Correct switch_output.
-## Try to ensure bibtex isn't given absolute pathname, when aux_dir
-## is under current directory. (Otherwise bibtex isn't allowed
-## to write a bbl file under default TeXLive settings.)
-## Add options -bibfudge, -bibfudge-, -nobibfudge.
-## Current version (4.70b, 29 Sep 2020) to CTAN
-## 13 Sep 2020 John Collins V. 4.70a. Updates in comments about bibtex.
-## 28 Aug 2020 John Collins Correct $biber and $bibtex to use %S not %B
-## 24 Aug 2020 John Collins Make sure bibtex/biber rules when created for
-## missing bbl file have correct path for source
-## and destination when out/aux dir used.
-## 16 Jun 2020 John Collins Warning when bibtex fudge is used.
-## Change default $bibtex_fudge to 0. This is safe with
-## at least bibtex in TeXLive 2019 or later, and in current
-## MiKTeX. This version of latexmk is distributed in TeXLive
-## and MiKTeX with a recent enough version of bibtex.
-## Previously, there was a bug in bibtex that prevented it
-## working correctly when -output-directory is used. Latexmk
-## took special action to evade the bug, but at the expense
-## of problems when a .bib file is specified in a directory
-## relative to the document directory.
-## V. 4.69c
-## 9 Jun 2020 John Collins Fix problems with excess calls to parse_log, and messages
-## about changing rule structure when .fdb_latexmk file
-## does not exist.
-## Making quoting (or not) of output and aux directories
-## for option to *latex obey $quote_filenames.
-## 8 Jun 2020 John Collins Engine detection: note that recent lualatex
-## uses luaHBtex, not luatex. So I modified the one
-## place that the name of the $engine is used.
-## 6 May 2020 John Collins Add diagnostic for changed environment variables
-## 27 Apr 2020 John Collins Put ./ for latexmkrc files in current directory
-## V. 4.69b
-## Current version (4.69a, 17 Apr 2020) to CTAN
-## 16 Apr 2020 John Collins Correct contents of "All targets (...) are up-to-date" message
-## V. 4.69a.
-## 12 Mar 2020 John Collins Version is 4.69
-## 7 Feb 2020 John Collins Report rc files read
-## 6 Feb 2020 John Collins Fix bug when -cd and -outdir are used, and outdir is
-## same as document directory. (Bug is caused by
-## problem in perl module Cwd.)
-## 2,3 Feb 2020 John Collins Correction in find_basename.
-## 31 Jan 2020 John Collins Cleanup sub exit_msg1: incorrect comment etc.
-## Extra @file_not_found entry for message from
-## \input on not-found-file
-## Remove use of $extension_treatment: Too hard to
-## check. Always use what was called 'unix' method.
-## When command-line-specified tex file not found,
-## test for cusdep to make it, then try kpsewhich,
-## and only if all 3 fail report an error.
-## 15 Jan 2020 John Collins Add -MSWinBackSlash -MSWinBackSlash- options to
-## control whether directory separator '\' is
-## used for filenames on command line for
-## called programs under MSWin.
-## 3 Jan 2020 John Collins Add -E option to default command for xdvipdfmx, to
-## match call made by xetex (see XeTeX_ext.c in
-## xetex source). This forces xdvipdfmx to always
-## try to embed fonts, ignoring licensing flags, etc.
+## That improves clean up. At least it could.
+## V. 4.73.
##
##
-## 1998-2019, John Collins: Many improvements and fixes.
+## 1998-2021, John Collins: Many improvements and fixes.
## See CHANGE-log.txt for full list, and CHANGES for summaries
##
## Modified by Evan McLean (no longer available for support)
@@ -179,8 +76,8 @@
$my_name = 'latexmk';
$My_name = 'Latexmk';
-$version_num = '4.72b';
-$version_details = "$My_name, John Collins, 15 April 2021";
+$version_num = '4.73';
+$version_details = "$My_name, John Collins, 3 May 2021";
use Config;
use File::Basename;
@@ -192,10 +89,6 @@ use File::Spec;
# The first does not exist in old versions of Perl, while the second
# is deprecated in more recent versions and will be removed
$have_bsd_glob = 0;
-sub my_glob {
- if ($have_bsd_glob) { return bsd_glob( $_[0] ); }
- else { return glob( $_[0] ); }
-}
use File::Glob;
if ( eval{ File::Glob->import('bsd_glob'); 1; } ) {
# Success in importing bsd_glob
@@ -212,6 +105,11 @@ elsif ( eval{ File::Glob->import('glob'); 1; } ) {
else {
die "Could not import 'File::Glob:bsd_glob' or 'File::Glob:glob'\n";
}
+# How I use the result of loading glob routines:
+sub my_glob {
+ if ($have_bsd_glob) { return bsd_glob( $_[0] ); }
+ else { return glob( $_[0] ); }
+}
use File::Path 2.08 qw( make_path );
use FileHandle;
@@ -281,7 +179,9 @@ $log_wrap = 79;
# See subroutine test_fix_texnames and its call for their use.
$illegal_in_texname = "\x00\t\f\n\r\$%\\~\x7F";
-# Whether to normalize filenames where possible:
+# Whether to normalize aux_dir and out_dir where possible.
+# This is important when these directories aren't subdirectories of the cwd,
+# and TeXLive's makeindex and/or bibtex are used.
$normalize_names = 2; # Strongest kind.
## Hash mapping file extension (w/o period, e.g., 'eps') to a single regexp,
@@ -300,7 +200,6 @@ $normalize_names = 2; # Strongest kind.
# are of a fixed size (as with a date/time stamp).
%hash_calc_ignore_pattern =();
-
# Specification of templates for extra rules.
# See subroutine rdb_initialize_rules for examples of rule templates, and
# how they get used to construct rules.
@@ -359,6 +258,10 @@ $pdflatex_silent_switch = '-interaction=batchmode';
$lualatex_silent_switch = '-interaction=batchmode';
$xelatex_silent_switch = '-interaction=batchmode';
+# Whether to emulate -aux-directory, so we can use it on system(s) (TeXLive)
+# that don't support it:
+$emulate_aux = 1;
+
%input_extensions = ();
# %input_extensions maps primary_rule_name to pointer to hash of file extensions
# used for extensionless files specified in the source file by constructs
@@ -566,13 +469,14 @@ $makeindex_fudge = 1; # Whether or not to cd to aux dir when running makeindex.
# makeindex writing to aux_dir when it is not specified
# as a subdirectory of cwd.
-## Command to convert dvi file to pdf file directly:
-$dvipdf = 'dvipdf %O %S %D';
+## Command to convert dvi file to pdf file directly.
+# Use option -dALLOWPSTRANSPARENCY so that it works with documents
+# using pstricks etc:
+$dvipdf = 'dvipdf -dALLOWPSTRANSPARENCY %O %S %D';
# N.B. Standard dvipdf runs dvips and gs with their silent switch, so for
# standard dvipdf $dvipdf_silent_switch is unneeded, but innocuous.
# But dvipdfmx can be used instead, and it has a silent switch (-q).
# So implementing $dvipdf_silent_switch is useful.
-
$dvipdf_silent_switch = '-q';
## Command to convert dvi file to ps file:
@@ -588,8 +492,10 @@ $dvips_pdf_switch = '-P pdf';
# Switch(es) to make dvips silent:
$dvips_silent_switch = '-q';
-## Command to convert ps file to pdf file:
-$ps2pdf = 'ps2pdf %O %S %D';
+## Command to convert ps file to pdf file.
+# Use option -dALLOWPSTRANSPARENCY so that it works with documents
+# using pstricks etc:
+$ps2pdf = 'ps2pdf -dALLOWPSTRANSPARENCY %O %S %D';
## Command to convert xdv file to pdf file
$xdvipdfmx = 'xdvipdfmx -E -o %D %O %S';
@@ -1100,9 +1006,12 @@ $jobname = ''; # Jobname: as with current tex, etc indicates
# invoked on multiple files.
$out_dir = ''; # Directory for output files.
# Cf. --output-directory of current *latex
+ # Blank means default, i.e., cwd.
$aux_dir = ''; # Directory for aux files (log, aux, etc).
# Cf. --aux-directory of current *latex in MiKTeX.
-
+ # Blank means default, i.e., same as $out_dir.
+ # Note that these values get modified when
+ # processing a .tex file.
## default flag settings.
$recorder = 1; # Whether to use recorder option on latex/pdflatex
@@ -1692,6 +1601,8 @@ while ($_ = $ARGV[0])
elsif (/^-diagnostics/) { $diagnostics = 1; }
elsif (/^-dvi$/) { $dvi_mode = 1; }
elsif (/^-dvi-$/) { $dvi_mode = 0; }
+ elsif (/^-emulate-aux-dir$/) { $emulate_aux = 1; }
+ elsif (/^-emulate-aux-dir-$/) { $emulate_aux = 0; }
elsif (/^-f$/) { $force_mode = 1; }
elsif (/^-f-$/) { $force_mode = 0; }
elsif (/^-g$/) { $go_mode = 1; }
@@ -1752,6 +1663,7 @@ while ($_ = $ARGV[0])
# N.B. This has already been obeyed.
}
elsif (/^-nobib(tex|)fudge$/) { $bibtex_fudge = 0; }
+ elsif (/^-noemulate-aux-dir$/) { $emulate_aux = 0; }
elsif (/^-no(make|)indexfudge$/) { $makeindex_fudge = 0; }
elsif ( /^-output-directory=(.*)$/ ||/^-outdir=(.*)$/ ) {
$out_dir = $1;
@@ -1958,7 +1870,8 @@ warn "$My_name: This is $version_details, version: $version_num.\n",
unless $silent;
-if ( ($out_dir ne '') && ($aux_dir eq '') ){
+if ( $aux_dir eq '' ){
+# ????????????This may be wrong, given MiKTeX's behavior
$aux_dir = $out_dir;
}
@@ -2373,58 +2286,10 @@ foreach $filename ( @file_list )
local $pdflatex = $pdflatex;
local $xelatex = $xelatex;
- # Ensure the output/auxiliary directories exist, if need be
- if ( $out_dir ) {
- if ( ! -e $out_dir ) {
- warn "$My_name: making output directory '$out_dir'\n"
- if ! $silent;
- make_path $out_dir;
- }
- elsif ( ! -d $out_dir ) {
- warn "$My_name: you requested output directory '$out_dir',\n",
- " but an ordinary file of the same name exists, which will\n",
- " probably give an error later\n";
- }
- }
-
- if ( $aux_dir && ($aux_dir ne $out_dir) ) {
- # N.B. If $aux_dir and $out_dir are the same, then the -output-directory
- # option is sufficient, especially because the -aux-directory exists
- # only in MiKTeX, not in TeXLive.
- if ( ! -e $aux_dir ) {
- warn "$My_name: making auxiliary directory '$aux_dir'\n"
- if ! $silent;
- make_path $aux_dir;
- }
- elsif ( ! -d $aux_dir ) {
- warn "$My_name: you requested aux directory '$aux_dir',\n",
- " but an ordinary file of the same name exists, which will\n",
- " probably give an error later\n";
- }
- }
-
- if ($normalize_names) {
- $aux_dir = normalize_filename($aux_dir);
- $out_dir = normalize_filename($out_dir);
- }
- set_dirs_etc();
- if ($diagnostics) {
- warn "$My_name: Cwd: '", good_cwd(), "'\n";
- warn "$My_name: Normalized aux dir and out dir: '$aux_dir', '$out_dir'\n";
- warn "$My_name: and combining forms: '$aux_dir1', '$out_dir1'\n";
- }
- if ( $out_dir && ($out_dir ne '.') ) {
- add_option( "-output-directory=$quote$out_dir$quote",
- \$latex, \$pdflatex, \$lualatex, \$xelatex );
- }
- if ( $aux_dir && ($aux_dir ne '.') && ($aux_dir ne $out_dir) ) {
- # N.B. If $aux_dir and $out_dir are the same, then the -output-directory
- # option is sufficient, especially because the -aux-directory exists
- # only in MiKTeX, not in TeXLive.
- add_option( "-aux-directory=$quote%V$quote",
- \$latex, \$pdflatex, \$lualatex, \$xelatex );
- }
+ &normalize_aux_out_ETC;
+ # Set -output-directory and -aux-directory options for *latex
+ &set_aux_out_options;
&set_names;
@@ -2438,7 +2303,6 @@ foreach $filename ( @file_list )
rdb_one_rule( 'view', sub{ $view_file = $$Psource; } );
if ( $cleanup_mode > 0 ) {
-# ?? MAY NEED TO FIX THE FOLLOWING IF $aux_dir or $out_dir IS SET.
my %other_generated = ();
my @index_bibtex_generated = ();
my @aux_files = ();
@@ -2742,14 +2606,10 @@ if ($failure_count > 0) {
}
if ( $where_log == 2 ) {
- warn "$My_name: You requested aux_dir '$aux_dir_requested',\n".
- " but '$aux_dir' was used by the *latex engine.\n".
- " That indicates a configuration error.\n";
- if ( ($tex_distribution !~ /^MiKTeX/i) && ($aux_dir_requested ne $out_dir_requested) ) {
- warn " Probably you set different aux and out directories,\n".
- " but that is not supported by your TeX distribution.\n".
- " The only current distribution supporting this is MiKTeX.\n";
- }
+ warn "$My_name: You requested aux_dir '$aux_dir_requested',\n",
+ " but '$out_dir' was used for the .log file etc, and I couldn't\n",
+ " correct the problem, even by setting emulation of aux_dir on.\n",
+ " There is a strong suspicion of a bug in $my_name or a configuration error.\n";
}
@@ -2850,27 +2710,27 @@ sub ensure_path {
print "Set environment variable $var='$ENV{$var}'\n";
}
}
-}
+} #END ensure_path
#############################################################
-sub set_dirs_etc {
- # Normalize $out_dir and $aux_dir, so that if they have a non-trivial last
- # component, any trailing '/' is removed.
- # Then set $out_dir1 and $aux_dir1 to have a directory separator character
- # '/' added if needed to give forms suitable for direct concatenation with
- # a filename. These are needed for substitutions like %Y%R.
- # Nasty cases of dir_name: "/" on all systems, "A:", "A:/" etc on MS-Win
- # Then set some TeX-related environment variables.
- $out_dir = dirname_no_tail( $out_dir );
+sub normalize_aux_out_ETC {
+ # 1. Normalize $out_dir and $aux_dir, so that if they have a non-trivial last
+ # component, any trailing '/' is removed.
+ # 2. Set $out_dir1 and $aux_dir1 to have a directory separator character
+ # '/' added if needed to give forms suitable for direct concatenation with
+ # a filename. These are needed for substitutions like %Y%R.
+ # Nasty cases of dir_name: "/" on all systems, "A:", "A:/" etc on MS-Win
+ # 3. Set some TeX-related environment variables.
+ # 4. Ensure the aux and out directories exist
$aux_dir = dirname_no_tail( $aux_dir );
- $out_dir1 = $out_dir;
+ $out_dir = dirname_no_tail( $out_dir );
+ if ($normalize_names) {
+ foreach ( $aux_dir, $out_dir ) { $_ = normalize_filename_abs($_); }
+ }
$aux_dir1 = $aux_dir;
- $out_dir_abs = abs_path($out_dir);
- $out_dir1_abs = $out_dir_abs;
- $aux_dir_abs = abs_path($aux_dir);
- $aux_dir1_abs = $aux_dir_abs;
- foreach ( $aux_dir1, $out_dir1, $aux_dir1_abs, $out_dir1_abs ) {
+ $out_dir1 = $out_dir;
+ foreach ( $aux_dir1, $out_dir1 ) {
if ( ($_ ne '') && ! m([\\/\:]$) ) {
# Add a trailing '/' if necessary to give a string that can be
# correctly concatenated with a filename:
@@ -2891,30 +2751,88 @@ sub set_dirs_etc {
# Convert $aux_dir to absolute path to make the search path invariant
# under change of directory.
foreach ( 'BIBINPUTS', 'TEXINPUTS' ) {
- ensure_path( $_, $aux_dir_abs );
+ ensure_path( $_, $aux_dir );
}
# Set TEXMFOUTPUT so that when the aux_dir is not a subdirectory
# of the cwd (or below), bibtex and makeindex can write to it.
# Otherwise, security precautions in these programs will prevent
- # them from writing there.
+ # them from writing there, on TeXLive. MiKTeX is different: see
+ # below.
# The security issues concern **document-controlled** writing of
# files, when bibtex or makeindex is invoked directly by a
# document. In contrast, here $aux_dir is set by latexmk, not by
# the document. (See the main texmf.cnf file in a TeXLive
- # distribution for some information.) The security issues here
- # appear to be identical to those when giving an
- # -output-directory=... option to *latex.
- # CONSTRAINTS:
- # 1. This works in the aux dir is an an absolute path pointing to a
- # higher-level directory, but NOT when it is a relative path, e.g.,
- # "../build".
- # 2. The directories for files on the command line given to bibtex
- # and makeindex must be exactly the same as the value in $aux_dir.
- # This is ensured by the way in which the command strings are
- # constructed.
- $ENV{TEXMFOUTPUT} = $aux_dir_abs;
+ # distribution for some information on security issues.)
+ #
+ # PROPERTIES:
+ # 1. In TeXLive, the use of TEXMFOUTPUT works if
+ # (a) the directory given is an an absolute path,
+ # AND (b) the path contains no .. pieces
+ # AND (c) the directory component of the filename(s) on the command
+ # line for makeindex and bibtex is exactly the same string as
+ # for the directory named in TEXMFOUTPUT.
+ # 2. In MiKTeX, bibtex has none of the security restrictions; but
+ # makeindex has, and the use of TEXMFOUTPUT has no effect.
+ # So the following is only needed for TeXLive.
+ $ENV{TEXMFOUTPUT} = $aux_dir;
+ }
+
+ # Ensure the output/auxiliary directories exist, if need be
+ if ( $out_dir ) {
+ make_path_mod( $out_dir, 'output' );
}
-}
+
+ if ( $aux_dir && ($aux_dir ne $out_dir) ) {
+ make_path_mod( $aux_dir, 'auxiliary' );
+ }
+
+ if ($diagnostics) {
+ warn "$My_name: Cwd: '", good_cwd(), "'\n";
+ warn "$My_name: Normalized aux dir and out dir: '$aux_dir', '$out_dir'\n";
+ warn "$My_name: and combining forms: '$aux_dir1', '$out_dir1'\n";
+ }
+
+} #END normalize_aux_out_ETC
+
+#############################################################
+
+sub set_aux_out_options {
+ # Set -output-directory and -aux-directory options for *latex. Use
+ # placeholders for substitutions so that correct value is put in at
+ # runtime.
+ # N.B. At this point, empty $aux_dir means cwd, unlike the definition
+ # used in initialization stage of latexmk.
+ if ($emulate_aux) {
+ if ( $aux_dir && ($aux_dir ne '.') ) {
+ # N.B. Set **output** directory to **aux_dir**, rather than
+ # out_dir. If aux and out dirs are are different, then we'll move
+ # the relevant files (.pdf, .ps, .dvi, .xdv, .fls to the output
+ # directory after running *latex.
+ add_option( "-output-directory=%V",
+ \$latex, \$pdflatex, \$lualatex, \$xelatex );
+ }
+ }
+ else {
+ if ( $out_dir && ($out_dir ne '.') ) {
+ add_option( "-output-directory=%W",
+ \$latex, \$pdflatex, \$lualatex, \$xelatex );
+ }
+ if ( $aux_dir ne $out_dir ) {
+ # N.B. If $aux_dir and $out_dir are the same, then the
+ # -output-directory option is sufficient, especially because
+ # the -aux-directory exists only in MiKTeX, not in TeXLive.
+ if ($aux_dir) {
+ add_option( "-aux-directory=%V",
+ \$latex, \$pdflatex, \$lualatex, \$xelatex );
+ }
+ else {
+ # Must have a non-empty string for argument of -aux-directory:
+ add_option( "-aux-directory=.",
+ \$latex, \$pdflatex, \$lualatex, \$xelatex );
+ }
+ }
+ }
+} #END set_aux_out_options
#############################################################
@@ -3284,7 +3202,6 @@ sub do_cusdep {
# Source does not exist. Users of this rule will need to turn
# it off when custom dependencies are reset
if ( !$silent ) {
-## ??? Was commented out. 1 Sep. 2008 restored, for cusdep no-file-exists issue
warn "$My_name: In trying to apply custom-dependency rule\n",
" to make '$$Pdest' from '$$Psource'\n",
" the source file has disappeared since the last run\n";
@@ -3976,6 +3893,8 @@ sub print_help
" -dvi- - turn off required dvi\n",
" -e <code> - Execute specified Perl code (as part of latexmk start-up\n",
" code)\n",
+ " -emulate-aux-dir - emulate -aux-directory option for *latex\n",
+ " -emulate-aux-dir- - use -aux-directory option with *latex\n",
" -f - force continued processing past errors\n",
" -f- - turn off forced continuing processing past errors\n",
" -gg - Super go mode: clean out generated files (-CA), and then\n",
@@ -4014,6 +3933,7 @@ sub print_help
" -nobibtex - never use bibtex\n",
" -nobibfudge or -nobibtexfudge - don't change directory when running bibtex\n",
" -nodependents - Do not show list of dependent files after processing\n",
+ " -noemulate-aux-dir - use -aux-directory option with *latex\n",
" -noindexfudge or -nomakeindexfudge - don't change directory when running makeindex\n",
" -norc - omit automatic reading of system, user and project rc files\n",
" -output-directory=dir or -outdir=dir\n",
@@ -4519,6 +4439,25 @@ sub set_names {
#**************************************************
+sub move_out_files_from_aux {
+ # Move output and fls files to out_dir
+ # Omit 'xdv', that goes to aux_dir (as with MiKTeX). It's not final output.
+ foreach my $ext ( 'fls', 'dvi', 'pdf', 'ps' ) {
+ # Include fls file, because MiKTeX puts it in out_dir, rather than
+ # aux_dir, which would seem more natural. We must maintain
+ # compatibility.
+ my $from = "$aux_dir1$root_filename.$ext";
+ my $to = "$out_dir1$root_filename.$ext" ;
+ if ( test_gen_file( $from ) ) {
+ if (! $silent) { warn "$My_name: Moving '$from' to '$to'\n"; }
+ my $ret = move( $from, $to );
+ if ( ! $ret ) { die " That failed, with message '$!'\n";}
+ }
+ }
+}
+
+#***************************************************
+
sub parse_log {
# Scan log file for: dependent files
# reference_changed, bad_reference, bad_citation
@@ -5335,10 +5274,11 @@ sub find_set_log {
# to (*)latex.
# Use of $aux_dir different to $out_dir, when (*)latex doesn't support
# the -aux-directory option (notably with TeXLive distribution).
- if ($where_log >= 0) {
- # .log file was found on previous run. No need to repeat search, since
- # if the location were to change from run to run, we'd have other
- # serious difficulties that are to hard to deal with.
+ if ($where_log == 1) {
+ # .log file was found in correct place on previous run.
+ # So there's no need to repeat search, since if the location were to
+ # change from run to run, we'd have other serious difficulties that are
+ # to hard to deal with.
return;
}
if ( test_gen_file( "$aux_dir1$root_filename.log" ) ) {
@@ -5349,9 +5289,22 @@ sub find_set_log {
# .log file is in out_dir not in aux_dir.
# Presumably there is a configuration error
# that prevents aux_dir from being used by latex.
- # So change $aux_dir to the actually used value.
- $where_log = 2;
- $aux_dir = $out_dir;
+ warn "$My_name: .log file in '$out_dir' instead of expected '$aux_dir'\n";
+ if ($emulate_aux) {
+ warn " But emulate_aux is on, so that should not happen\n",
+ " I'll switch aux_dir to equal out_dir\n";
+ $where_log = 2;
+ $aux_dir = $out_dir;
+ }
+ else {
+ warn " But emulate_aux is off. So I'll turn it on.\n";
+ $emulate_aux = 1;
+ foreach ( $$Pext_cmd, $$Pint_cmd ) {
+ s/ -output-directory=[^ ]*(?= )//g;
+ s/ -aux(-directory=[^ ]*)(?= )/ -output$1/g;
+ }
+ print "========== '$$Pext_cmd' '$$Pint_cmd'\n";
+ }
}
elsif ( test_gen_file( "$root_filename.log" ) ) {
# .log file is not in out_dir nor in aux_dir, but is in cwd.
@@ -5373,7 +5326,7 @@ sub find_set_log {
warn "$My_name: Changed aux_dir from '$aux_dir_requested' to '$aux_dir'\n".
" to allow for probable configuration error\n";
# Allow for the changes associated with change of $aux_dir:
- &set_dirs_etc;
+ &normalize_aux_out_ETC;
&set_names;
warn "$My_name: Actual .log file is\n",
" '$log_name'\n",
@@ -5381,11 +5334,12 @@ sub find_set_log {
" '$aux_dir_requested/$root_filename.log'\n",
" that seemed to be intended.\n";
}
-}
+} #END find_set_log
#************************************************************
sub parse_fls {
+ my $start_time = processing_time();
my ($fls_name, $Pinputs, $Poutputs, $Pfirst_read_after_write, $Ppwd_latex ) = @_;
%$Pinputs = %$Poutputs = %$Pfirst_read_after_write = ();
my $fls_file = new FileHandle;
@@ -5538,10 +5492,9 @@ sub normalize_filename {
my ( $file, @dirs ) = @_;
my $file1 = $file; # Saved original value
my $cwd = good_cwd();
- my $cwd1 = cwd();
# Normalize files to use / to separate directory components:
# (Note both / and \ are allowed under MSWin.)
- foreach ($cwd, $cwd1, $file, @dirs) {
+ foreach ($cwd, $file, @dirs) {
s(\\)(/)g;
$_ = dirname_no_tail( $_ );
}
@@ -5549,7 +5502,7 @@ sub normalize_filename {
# Remove initial component equal to current working directory.
# Use \Q and \E round directory name in regex to avoid interpretation
# of metacharacters in directory name:
- foreach my $dir ( @dirs, '.', $cwd, $cwd1 ) {
+ foreach my $dir ( @dirs, '.', $cwd ) {
if ( $dir =~ /^\s*$/ ) {
# All spaces, nothing to do.
next;
@@ -5571,10 +5524,19 @@ sub normalize_filename {
$file = '';
}
return $file;
-}
+} #END normalize_filename
# ------------------------------
+sub normalize_filename_abs {
+ # Convert filename to be either
+ # absolute path in canonical form
+ # or relative to cwd.
+ return normalize_filename( abs_path($_[0]) );
+}
+
+#-----------------------------
+
sub normalize_clean_filename {
# Usage: normalize_clean_filename( filename [, extra forms of name of cwd] )
# Same as normalize_filename, but first remove any double quotes, as
@@ -7647,8 +7609,6 @@ sub rdb_make1 {
if ( !$$Plast_message ) {
$$Plast_message = "Run of rule '$rule' gave a non-zero error code";
}
-# !!?? $failure_msg = $$Plast_message;
-
}
foreach ( keys %$PHsource_rules ) {
$$PHsource_rules{$_} = $pass{$_};
@@ -7935,6 +7895,9 @@ sub rdb_run1 {
}
}
+ if ( ($$Pcmd_type eq 'primary') && ( $aux_dir ne $out_dir ) ) {
+ &move_out_files_from_aux;
+ }
$updated = 1;
if ($$Ptest_kind == 3) {
# We are time-criterion first time only. Now switch to
@@ -8070,7 +8033,6 @@ sub Run_subst {
#-----------------
sub rdb_primary_run {
-#?? See multipass_run in previous version Aug 2007 for issues
# Call: rdb_primary_run
# Assumes contexts for: recursion, make, & rule.
# Assumes (a) the rule is a primary,
@@ -8157,12 +8119,6 @@ sub rdb_primary_run {
$updated = 1; # Flag that some dependent file has been remade
-#?? # Fix the state of the files as of now: this will solve the
-#?? # problem of latex and pdflatex interfering with each other,
-#?? # at the expense of some non-optimality
-#?? #?? Check this is correct:
-#?? &rdb_update_files;
-
if ( $diagnostics ) {
print "$My_name: Rules after run: \n";
rdb_show();
@@ -8251,7 +8207,6 @@ sub rdb_flag_changes_here {
if ($$Pout_of_date) {
push @rules_to_apply, $rule;
}
-#?? print "======== flag: $rule $$Pout_of_date ==========\n";
} #END rdb_flag_changes_here
#************************************************************
@@ -8405,7 +8360,6 @@ sub rdb_diagnose_changes {
#
# When the action subroutine(s) are actually called, a context for the
# rule and/or file (as appropriate) is given by setting named
-## NEW ??
# variables to REFERENCES to the relevant data values. These can be
# used to retrieve and set the data values. As a convention,
# references to scalars are given by variables named start with "$P",
@@ -8413,12 +8367,6 @@ sub rdb_diagnose_changes {
# "$PAint_cmd", and references to hashes with "$PH", as in "$PHsource".
# After the action subroutine has finished, checks for data
# consistency may be made.
-## ??? OLD
-# variables to the relevant data values. After the action subroutine
-# has finished, the database is updated with the values of these named
-# variables, with any necessary consistency checks. Thus the action
-# subroutines can act on sensibly named variables without needed to
-# know the database structure.
#
# The only routines that actually use the database structure and need
# to be changed if that is changed are: (a) the routines rdb_one_rule
@@ -9417,9 +9365,6 @@ sub find_file_list1 {
my $ref_search = $_[3];
my @not_found = ();
-#?? show_array( "=====find_file_list1. Suffix: '$suffix'\n Source:", @$ref_input );
-#?? show_array( " Bibinputs:", @$ref_search );
-
my @return_list = (); # Generate list in local array, since input
# and output arrays may be same
my $retcode = 0;
@@ -9467,6 +9412,33 @@ sub unlink_or_move {
#************************************************************
+sub make_path_mod {
+ my $dir = $_[0];
+ my $title = $_[1];
+ my $ret = 0;
+ if ( (! -e $dir) && (! -l $dir) ) {
+ warn "$My_name: making $title directory '$dir'\n"
+ if ! $silent;
+ make_path( $dir );
+ }
+ elsif ( -l $dir ) {
+ $ret = 1;
+ warn "$My_name: you requested $title directory '$dir',\n",
+ " but there exists a symlink that has the same name, but\n",
+ " does not point to anything. I won't create a directory, and\n",
+ " that will probably give an error later.\n";
+ }
+ elsif ( ! -d $dir ) {
+ $ret = 2;
+ warn "$My_name: you requested $title directory '$dir',\n",
+ " but an ordinary file of the same name exists, which will\n",
+ " probably give an error later.\n";
+ }
+ return $ret;
+}
+
+#************************************************************
+
sub kpsewhich {
# Usage: kpsewhich( filespec, ...)
# Returns array of files with paths as found by kpsewhich
diff --git a/Build/source/texk/texlive/linked_scripts/texlive/tlmgr.pl b/Build/source/texk/texlive/linked_scripts/texlive/tlmgr.pl
index becdce9782f..648d5a7e4f7 100755
--- a/Build/source/texk/texlive/linked_scripts/texlive/tlmgr.pl
+++ b/Build/source/texk/texlive/linked_scripts/texlive/tlmgr.pl
@@ -1,12 +1,12 @@
#!/usr/bin/env perl
-# $Id: tlmgr.pl 58961 2021-04-22 00:55:07Z preining $
+# $Id: tlmgr.pl 59064 2021-05-03 17:37:44Z karl $
#
# Copyright 2008-2021 Norbert Preining
# This file is licensed under the GNU General Public License version 2
# or any later version.
-my $svnrev = '$Revision: 58961 $';
-my $datrev = '$Date: 2021-04-21 17:55:07 -0700 (Wed, 21 Apr 2021) $';
+my $svnrev = '$Revision: 59064 $';
+my $datrev = '$Date: 2021-05-03 19:37:44 +0200 (Mon, 03 May 2021) $';
my $tlmgrrevision;
my $tlmgrversion;
my $prg;
@@ -5249,13 +5249,18 @@ sub uninstall_texlive {
return if !check_on_writable();
init_local_db(0);
+ if (defined($opts{"dry-run"})) {
+ # TODO: we should implement --dry-run for remove --all.
+ print "Sorry, no --dry-run with remove --all; goodbye.\n";
+ return ($F_OK | $F_NOPOSTACTION);
+ }
my $force = defined($opts{"force"}) ? $opts{"force"} : 0;
if (!$force) {
print("If you answer yes here the whole TeX Live installation here,\n",
"under ", $localtlpdb->root, ", will be removed!\n");
print "Remove TeX Live (y/N): ";
my $yesno = <STDIN>;
- if ($yesno !~ m/^y(es)?$/i) {
+ if (!defined($yesno) || $yesno !~ m/^y(es)?$/i) {
print "Ok, cancelling the removal!\n";
return ($F_OK | $F_NOPOSTACTION);
}
@@ -7215,14 +7220,16 @@ and the repository are not compatible:
# check for being frozen
if ($remotetlpdb->config_frozen) {
my $frozen_msg = <<FROZEN;
-TeX Live $TeXLive::TLConfig::ReleaseYear is frozen and will no longer
-be routinely updated. This happens when a new release is made.
+TeX Live $TeXLive::TLConfig::ReleaseYear is frozen
+and will no longer be routinely updated. This happens when a new
+release is made, or will be made shortly.
+
+If you're willing to help with pretesting a new release, and we hope
+you are, please see https://tug.org/texlive/pretest.html.
-If you're willing to help with pretesting the new release, and we hope
-you are, (when pretests are available), please read
-https://tug.org/texlive/pretest.html.
+For general status information about TeX Live, see its home page:
+https://tug.org/texlive
-Otherwise, just wait, and the new release will be ready in due time.
FROZEN
# don't die here, we want to allow updates even if tlnet is frozen!
tlwarn($frozen_msg);
@@ -8870,9 +8877,10 @@ written to the terminal.
=back
-This action does not automatically remove symlinks to executables from
-system directories; you need to run C<tlmgr path remove> (L</path>)
-yourself if you are using this feature and want stale symlinks removed.
+Except with C<--all>, this C<remove> action does not automatically
+remove symlinks to executables from system directories; you need to run
+C<tlmgr path remove> (L</path>) yourself if you remove an individual
+package with a symlink in a system directory.
=head2 repository
@@ -10116,7 +10124,7 @@ This script and its documentation were written for the TeX Live
distribution (L<https://tug.org/texlive>) and both are licensed under the
GNU General Public License Version 2 or later.
-$Id: tlmgr.pl 58961 2021-04-22 00:55:07Z preining $
+$Id: tlmgr.pl 59064 2021-05-03 17:37:44Z karl $
=cut
# test HTML version: pod2html --cachedir=/tmp tlmgr.pl >/tmp/tlmgr.html
diff --git a/Build/source/texk/texlive/linked_scripts/texlive/updmap.pl b/Build/source/texk/texlive/linked_scripts/texlive/updmap.pl
index f2cfbe78693..187fd50a36b 100755
--- a/Build/source/texk/texlive/linked_scripts/texlive/updmap.pl
+++ b/Build/source/texk/texlive/linked_scripts/texlive/updmap.pl
@@ -1,5 +1,5 @@
#!/usr/bin/env perl
-# $Id: updmap.pl 58960 2021-04-22 00:52:00Z preining $
+# $Id: updmap.pl 59062 2021-05-03 15:46:54Z karl $
# updmap - maintain map files for outline fonts.
# (Maintained in TeX Live:Master/texmf-dist/scripts/texlive.)
#
@@ -14,7 +14,7 @@
# the original versions were licensed under the following agreement:
# Anyone may freely use, modify, and/or distribute this file, without
-my $svnid = '$Id: updmap.pl 58960 2021-04-22 00:52:00Z preining $';
+my $svnid = '$Id: updmap.pl 59062 2021-05-03 15:46:54Z karl $';
my $TEXMFROOT;
BEGIN {
@@ -27,10 +27,10 @@ BEGIN {
unshift(@INC, "$TEXMFROOT/tlpkg");
}
-my $lastchdate = '$Date: 2021-04-22 02:52:00 +0200 (Thu, 22 Apr 2021) $';
+my $lastchdate = '$Date: 2021-05-03 17:46:54 +0200 (Mon, 03 May 2021) $';
$lastchdate =~ s/^\$Date:\s*//;
$lastchdate =~ s/ \(.*$//;
-my $svnrev = '$Revision: 58960 $';
+my $svnrev = '$Revision: 59062 $';
$svnrev =~ s/^\$Revision:\s*//;
$svnrev =~ s/\s*\$$//;
my $version = "r$svnrev ($lastchdate)";
@@ -1338,26 +1338,27 @@ sub mkMaps {
}
}
- # all kind of warning messages
+ # all kinds of warning messages
if ($first_time_creation_in_usermode) {
print_and_log("
*************************************************************
* *
* WARNING: you are switching to updmap's per-user mappings. *
-* Please read the following explanations. *
+* Please read the following warnings! *
* *
*************************************************************
-You have run updmap-user (as opposed to updmap-sys) for the first time; this
-has created configuration files which are local to your personal account.
+You have run updmap-user (as opposed to updmap-sys) for the first time;
+this has created configuration files which are local to your personal account.
-Any changes in system map files will *not* be automatically reflected in
-your files; furthermore, running updmap-sys will no longer have any
-effect for you. As a consequence, you have to rerun updmap-user yourself
-after any change in the system directories; for example, if a new font
-package is added.
+From now on, any changes in system map files will *not* be automatically
+reflected in your files; furthermore, running updmap-sys (as is done
+automatically) will no longer have any effect for you.
-See http://tug.org/texlive/scripts-sys-user.html for details.
+As a consequence, you yourself have to rerun updmap-user yourself after
+any change in the *system* directories! For example, if a new font
+package is added or existing mappings change, which happens frequently.
+See https://tug.org/texlive/scripts-sys-user.html for details.
If you want to undo this, remove the files mentioned above.
@@ -2262,10 +2263,10 @@ Usage: $prg [-user|-sys] [OPTION] ... [COMMAND]
or: $prg-user [OPTION] ... [COMMAND]
or: $prg-sys [OPTION] ... [COMMAND]
-Update the default font map files used by pdftex (pdftex.map), dvips
-(psfonts.map), and dvipdfm(x), and optionally pxdvi, as determined by
-all configuration files updmap.cfg (the ones returned by running
-"kpsewhich --all updmap.cfg", but see below).
+Update the default font map files used by pdftex and dvipdfm(x)
+(pdftex.map), dvips (psfonts.map), and optionally pxdvi, as determined
+by all configuration files updmap.cfg (usually the ones returned by
+running "kpsewhich --all updmap.cfg", but see below).
Among other things, these map files are used to determine which fonts
should be used as bitmaps and which as outlines, and to determine which
@@ -2274,11 +2275,11 @@ font files are included, typically subsetted, in the PDF or PostScript output.
updmap-sys (or updmap -sys) is intended to affect the system-wide
configuration, while updmap-user (or updmap -user) affects personal
configuration files only, overriding the system files.
-As a consequence, once updmap-user has been run, even a single time,
-running updmap-sys no longer has any effect. (updmap-sys issues a
-warning in this situation.)
-See http://tug.org/texlive/scripts-sys-user.html for details.
+As a consequence, once updmap-user has been run, even a single time,
+running updmap-sys no longer has any effect. updmap-sys issues a
+warning about this, since it is rarely desirable.
+See https://tug.org/texlive/scripts-sys-user.html for details.
By default, the TeX filename database (ls-R) is also updated.
@@ -2295,8 +2296,6 @@ historical reasons. A general overview:
installation time, by the system installer or the package manager or
by hand, and not (by default) by updmap.
-Good luck.
-
Options:
--cnffile FILE read FILE for the updmap configuration
(can be given multiple times, in which case
@@ -2309,28 +2308,28 @@ Options:
--copy cp generic files rather than using symlinks
--force recreate files even if config hasn't changed
--nomkmap do not recreate map files
- --nohash do not run texhash
+ --nohash do not run mktexlsr (a.k.a. texhash)
--sys affect system-wide files (equivalent to updmap-sys)
--user affect personal files (equivalent to updmap-user)
-n, --dry-run only show the configuration, no output
--quiet, --silent reduce verbosity
Commands:
- --help show this message and exit
- --version show version information and exit
- --showoption OPTION show the current setting of OPTION
- --showoptions OPTION show possible settings for OPTION
- --setoption OPTION VALUE set OPTION to value; option names below
- --setoption OPTION=VALUE as above, just different syntax
- --enable MAPTYPE MAPFILE add "MAPTYPE MAPFILE" to updmap.cfg,
- where MAPTYPE is Map, MixedMap, or KanjiMap
- --enable Map=MAPFILE add \"Map MAPFILE\" to updmap.cfg
- --enable MixedMap=MAPFILE add \"MixedMap MAPFILE\" to updmap.cfg
- --enable KanjiMap=MAPFILE add \"KanjiMap MAPFILE\" to updmap.cfg
- --disable MAPFILE disable MAPFILE, of whatever type
- --listmaps list all maps (details below)
- --listavailablemaps list available maps (details below)
- --syncwithtrees disable unavailable map files in updmap.cfg
+ --help show this message and exit
+ --version show version information and exit
+ --showoption OPTION show the current setting of OPTION
+ --showoptions OPTION show possible settings for OPTION
+ --setoption OPTION VALUE set OPTION to value; option names below
+ --setoption OPTION=VALUE as above, just different syntax
+ --enable MAPTYPE MAPFILE add "MAPTYPE MAPFILE" to updmap.cfg,
+ where MAPTYPE is Map, MixedMap, or KanjiMap
+ --enable Map=MAPFILE add \"Map MAPFILE\" to updmap.cfg
+ --enable MixedMap=MAPFILE add \"MixedMap MAPFILE\" to updmap.cfg
+ --enable KanjiMap=MAPFILE add \"KanjiMap MAPFILE\" to updmap.cfg
+ --disable MAPFILE disable MAPFILE, of whatever type
+ --listmaps list all maps (details below)
+ --listavailablemaps list available maps (details below)
+ --syncwithtrees disable unavailable map files in updmap.cfg
The main output:
@@ -2360,7 +2359,7 @@ Explanation of the map types:
The only difference between Map and MixedMap is that MixedMap entries
are not added to psfonts_pk.map. The purpose is to help users with
- devices that render Type 1 outline fonts worse than mode-tuned Type 1
+ devices that render Type 1 outline fonts worse than mode-tuned Type 3
bitmap fonts. So, MixedMap is used for fonts that are available as
both Type 1 and Metafont.
@@ -2463,7 +2462,7 @@ Where and which updmap.cfg changes are saved:
config file, a higher-level one can be used. That way, the
distribution's settings can be overridden system-wide using
TEXMFLOCAL, and system settings can be overridden again in a
- particular user's TEXMFHOME.
+ particular user's TEXMFHOME or TEXMFCONFIG.
Resolving multiple definitions of a font:
@@ -2522,11 +2521,11 @@ will be read and written, give the -n option (or read the source).
The log file is written to TEXMFVAR/web2c/updmap.log.
For step-by-step instructions on making new fonts known to TeX, read
-http://tug.org/fonts/fontinstall.html. For even more terse
+https://tug.org/fonts/fontinstall.html. For even more terse
instructions, read the beginning of the main updmap.cfg file.
Report bugs to: tex-live\@tug.org
-TeX Live home page: <http://tug.org/texlive/>
+TeX Live home page: <https://tug.org/texlive/>
EOF
;
print &version();