From eb6363534f301e2f988315c0cd6215b2f6cfc150 Mon Sep 17 00:00:00 2001 From: Karl Berry Date: Tue, 4 May 2021 22:31:39 +0000 Subject: latexmk (5may21) git-svn-id: svn://tug.org/texlive/trunk@59081 c570f23f-e606-0410-a88d-b1316a301751 --- .../texk/texlive/linked_scripts/latexmk/latexmk.pl | 512 ++++++++++----------- .../texk/texlive/linked_scripts/texlive/tlmgr.pl | 36 +- .../texk/texlive/linked_scripts/texlive/updmap.pl | 87 ++-- 3 files changed, 307 insertions(+), 328 deletions(-) (limited to 'Build') diff --git a/Build/source/texk/texlive/linked_scripts/latexmk/latexmk.pl b/Build/source/texk/texlive/linked_scripts/latexmk/latexmk.pl index 1ef32d985ef..afa5cdcd594 100755 --- a/Build/source/texk/texlive/linked_scripts/latexmk/latexmk.pl +++ b/Build/source/texk/texlive/linked_scripts/latexmk/latexmk.pl @@ -26,141 +26,38 @@ ## ## ## -## Modification log from 1 Jan 2020 onwards in detail +## Modification log from 14 Apr 2021 onwards in detail ## +## 3 May 2021 John Collins Minor corrections +## 30 Apr 2021 John Collins Revert the change of 14-15 Apr, by removing the +## of cwd(). That gave sometimes obnoxiously slow +## parsing of big log files, because of the slowness +## of large number of calls to cwd() caused by calls +## to sub normalize_filename. I think I am mistaken +## that cwd() could possibly give a different result +## than getcwd(), whose cached result is used by +## my goodcwd(). That idea was my motivation on 14 Apr. +## 22 Apr 2021 John Collins Clean up aux and out_dir code. +## 21 Apr 2021 John Collins Clean up some comments +## Add in emulation of -aux-directory. On by +## default. +## 20 Apr 2021 John Collins Add -dALLOWPSTRANSPARENCY option to ps2pdf and +## dvi2pdf. That avoids problems with recent +## ghostscript versions when, e.g., pstricks is used. +## 16 Apr 2021 John Collins Better normalization of aux_dir and out_dir, so +## that TEXMFOUTPUT, and the source and dest names for bibtex +## and makeindex allow them to work always when the aux_dir +## is **not** below cwd, at least under TeX Live. With MiKTeX +## bibtex works even without special precautions for aux_dir +## not below cwd. But makeindex doesn't work in this case, +## even if TEXMFOUTPUT is set correctly. ## 14-15 Apr 2021 John Collins In normalize_filename, try both good_cwd() and ## cwd() for removing directory component. -## That improves clean up. -## V. 4.72b -## 14 Apr 2021 John Collins Allow index instead of makeindex in indexfudge options -## 12 Apr 2021 John Collins Start to fix bug on not-found files with out_dir = . -## 11 Apr 2021 John Collins V. 4.72a. -## Modify contents of minimal aux file. -## 9 Apr 2021 John Collins Correct bug that if on one run of latexmk a -## missing file was detected and the file was -## later created, then a subsequent run of latexmk -## didn't cause a recompilation. The cause was an -## error in latexmk's initialization of its file -## database. -## V. 4.72. -## 12 Jan 2021 John Collins Correct parse_log -## 28 Dec 2020 John Collins Process -output-format=fmt option rather than passing it to *latex -## 26-27 Dec 2020 John Collins Deal with bug exposed by chapterbib. (It involved -## incorrect attempt to deal with filenames specified -## relative to aux_dir. -## 14 Dec 2020 John Collins Try to solve problems of normalization of source -## name and general normalization of file names. -## 10 Dec 2020 John Collins Set up run_makeindex and $makeindex_fudge, just as -## for bibtex, and corresponding CL options. -## Revert changes to normalize_filename, they aren't -## needed any more. -## Normalize filenames in rdb_ensure_file. -## 25 Nov 2020 John Collins Revert to default $bibtex_fudge to 1 -## Rationale: -## There are enough annoying security-related -## complications in many cases concerning -## filenames with a path component given to -## bibtex, that it is better to do the cd trick -## by default. In addition there are some -## interesting incompatibilities between TeXLive -## and MiKTeX. In the rare (I suspect) cases -## where the fudge fails, the user can always -## turn it off, of course. -## I should do same fudge for makeindex. -## Comment out warning when bibtex fudge is used. -## 18 Nov 2020 John Collins Add options -bibtexfudge, -bibtexfudge-, -nobibtexfudge, -## so that the options are in agreement with documentation -## including historical versions. -## Set environmnent variable TEXMFOUTPUT to the -## aux_dir. This solves problem that bibtex and -## makeindex sometimes cannot write to the -## aux_dir (for their log and output files). This -## problem occurs notably when the aux_dir is -## specified by an absolute path to a directory that -## is not a subdirectory of the cwd. -## 12 Nov 2020 John Collins Correct some aliasing of filenames. -## 11 Nov 2020 John Collins Remove some messages. -## Don't allow log file as a source. -## 2 Nov 2020 John Collins Refuse to allow main pdf file or main output file to -## be source of a primary rule, and give warning -## about it. (Concerns at least hyperxmp (2020/10/05 v. 5.6; -## this accesses file system metadata, specifically file size, -## and the fls file therefore lists the pdf file as a source. -## This generally leads to an infinite loop, without a special -## a configuration.) Hyperxmp v. 5.7 2010/11/01 doesn't give -## this problem. But the test is still good to have. -## 23 Oct 2020 John Collins Fix incorrect $/ in reading rc files -## 10-15 Oct 2020 John Collins Correct bug in normalizing filename -## Give .latexmkrc priority over latexmkrc in cwd -## 8 Oct 2020 John Collins Restore use Cwd "chdir";. There's no longer -## a problem with cd -## 7 Oct 2020 John Collins Extra diagnostics for reporting normalized aux/out dirs -## 6 Oct 2020 John Collins Better normalize etc. -## 1 Oct 2020 John Collins Improve some messages. -## 30 Sep 2020 John Collins V. 4.70c. -## Clean up some comments. -## 29 Sep 2020 John Collins V. 4.70b. -## Correct switch_output. -## Try to ensure bibtex isn't given absolute pathname, when aux_dir -## is under current directory. (Otherwise bibtex isn't allowed -## to write a bbl file under default TeXLive settings.) -## Add options -bibfudge, -bibfudge-, -nobibfudge. -## Current version (4.70b, 29 Sep 2020) to CTAN -## 13 Sep 2020 John Collins V. 4.70a. Updates in comments about bibtex. -## 28 Aug 2020 John Collins Correct $biber and $bibtex to use %S not %B -## 24 Aug 2020 John Collins Make sure bibtex/biber rules when created for -## missing bbl file have correct path for source -## and destination when out/aux dir used. -## 16 Jun 2020 John Collins Warning when bibtex fudge is used. -## Change default $bibtex_fudge to 0. This is safe with -## at least bibtex in TeXLive 2019 or later, and in current -## MiKTeX. This version of latexmk is distributed in TeXLive -## and MiKTeX with a recent enough version of bibtex. -## Previously, there was a bug in bibtex that prevented it -## working correctly when -output-directory is used. Latexmk -## took special action to evade the bug, but at the expense -## of problems when a .bib file is specified in a directory -## relative to the document directory. -## V. 4.69c -## 9 Jun 2020 John Collins Fix problems with excess calls to parse_log, and messages -## about changing rule structure when .fdb_latexmk file -## does not exist. -## Making quoting (or not) of output and aux directories -## for option to *latex obey $quote_filenames. -## 8 Jun 2020 John Collins Engine detection: note that recent lualatex -## uses luaHBtex, not luatex. So I modified the one -## place that the name of the $engine is used. -## 6 May 2020 John Collins Add diagnostic for changed environment variables -## 27 Apr 2020 John Collins Put ./ for latexmkrc files in current directory -## V. 4.69b -## Current version (4.69a, 17 Apr 2020) to CTAN -## 16 Apr 2020 John Collins Correct contents of "All targets (...) are up-to-date" message -## V. 4.69a. -## 12 Mar 2020 John Collins Version is 4.69 -## 7 Feb 2020 John Collins Report rc files read -## 6 Feb 2020 John Collins Fix bug when -cd and -outdir are used, and outdir is -## same as document directory. (Bug is caused by -## problem in perl module Cwd.) -## 2,3 Feb 2020 John Collins Correction in find_basename. -## 31 Jan 2020 John Collins Cleanup sub exit_msg1: incorrect comment etc. -## Extra @file_not_found entry for message from -## \input on not-found-file -## Remove use of $extension_treatment: Too hard to -## check. Always use what was called 'unix' method. -## When command-line-specified tex file not found, -## test for cusdep to make it, then try kpsewhich, -## and only if all 3 fail report an error. -## 15 Jan 2020 John Collins Add -MSWinBackSlash -MSWinBackSlash- options to -## control whether directory separator '\' is -## used for filenames on command line for -## called programs under MSWin. -## 3 Jan 2020 John Collins Add -E option to default command for xdvipdfmx, to -## match call made by xetex (see XeTeX_ext.c in -## xetex source). This forces xdvipdfmx to always -## try to embed fonts, ignoring licensing flags, etc. +## That improves clean up. At least it could. +## V. 4.73. ## ## -## 1998-2019, John Collins: Many improvements and fixes. +## 1998-2021, John Collins: Many improvements and fixes. ## See CHANGE-log.txt for full list, and CHANGES for summaries ## ## Modified by Evan McLean (no longer available for support) @@ -179,8 +76,8 @@ $my_name = 'latexmk'; $My_name = 'Latexmk'; -$version_num = '4.72b'; -$version_details = "$My_name, John Collins, 15 April 2021"; +$version_num = '4.73'; +$version_details = "$My_name, John Collins, 3 May 2021"; use Config; use File::Basename; @@ -192,10 +89,6 @@ use File::Spec; # The first does not exist in old versions of Perl, while the second # is deprecated in more recent versions and will be removed $have_bsd_glob = 0; -sub my_glob { - if ($have_bsd_glob) { return bsd_glob( $_[0] ); } - else { return glob( $_[0] ); } -} use File::Glob; if ( eval{ File::Glob->import('bsd_glob'); 1; } ) { # Success in importing bsd_glob @@ -212,6 +105,11 @@ elsif ( eval{ File::Glob->import('glob'); 1; } ) { else { die "Could not import 'File::Glob:bsd_glob' or 'File::Glob:glob'\n"; } +# How I use the result of loading glob routines: +sub my_glob { + if ($have_bsd_glob) { return bsd_glob( $_[0] ); } + else { return glob( $_[0] ); } +} use File::Path 2.08 qw( make_path ); use FileHandle; @@ -281,7 +179,9 @@ $log_wrap = 79; # See subroutine test_fix_texnames and its call for their use. $illegal_in_texname = "\x00\t\f\n\r\$%\\~\x7F"; -# Whether to normalize filenames where possible: +# Whether to normalize aux_dir and out_dir where possible. +# This is important when these directories aren't subdirectories of the cwd, +# and TeXLive's makeindex and/or bibtex are used. $normalize_names = 2; # Strongest kind. ## Hash mapping file extension (w/o period, e.g., 'eps') to a single regexp, @@ -300,7 +200,6 @@ $normalize_names = 2; # Strongest kind. # are of a fixed size (as with a date/time stamp). %hash_calc_ignore_pattern =(); - # Specification of templates for extra rules. # See subroutine rdb_initialize_rules for examples of rule templates, and # how they get used to construct rules. @@ -359,6 +258,10 @@ $pdflatex_silent_switch = '-interaction=batchmode'; $lualatex_silent_switch = '-interaction=batchmode'; $xelatex_silent_switch = '-interaction=batchmode'; +# Whether to emulate -aux-directory, so we can use it on system(s) (TeXLive) +# that don't support it: +$emulate_aux = 1; + %input_extensions = (); # %input_extensions maps primary_rule_name to pointer to hash of file extensions # used for extensionless files specified in the source file by constructs @@ -566,13 +469,14 @@ $makeindex_fudge = 1; # Whether or not to cd to aux dir when running makeindex. # makeindex writing to aux_dir when it is not specified # as a subdirectory of cwd. -## Command to convert dvi file to pdf file directly: -$dvipdf = 'dvipdf %O %S %D'; +## Command to convert dvi file to pdf file directly. +# Use option -dALLOWPSTRANSPARENCY so that it works with documents +# using pstricks etc: +$dvipdf = 'dvipdf -dALLOWPSTRANSPARENCY %O %S %D'; # N.B. Standard dvipdf runs dvips and gs with their silent switch, so for # standard dvipdf $dvipdf_silent_switch is unneeded, but innocuous. # But dvipdfmx can be used instead, and it has a silent switch (-q). # So implementing $dvipdf_silent_switch is useful. - $dvipdf_silent_switch = '-q'; ## Command to convert dvi file to ps file: @@ -588,8 +492,10 @@ $dvips_pdf_switch = '-P pdf'; # Switch(es) to make dvips silent: $dvips_silent_switch = '-q'; -## Command to convert ps file to pdf file: -$ps2pdf = 'ps2pdf %O %S %D'; +## Command to convert ps file to pdf file. +# Use option -dALLOWPSTRANSPARENCY so that it works with documents +# using pstricks etc: +$ps2pdf = 'ps2pdf -dALLOWPSTRANSPARENCY %O %S %D'; ## Command to convert xdv file to pdf file $xdvipdfmx = 'xdvipdfmx -E -o %D %O %S'; @@ -1100,9 +1006,12 @@ $jobname = ''; # Jobname: as with current tex, etc indicates # invoked on multiple files. $out_dir = ''; # Directory for output files. # Cf. --output-directory of current *latex + # Blank means default, i.e., cwd. $aux_dir = ''; # Directory for aux files (log, aux, etc). # Cf. --aux-directory of current *latex in MiKTeX. - + # Blank means default, i.e., same as $out_dir. + # Note that these values get modified when + # processing a .tex file. ## default flag settings. $recorder = 1; # Whether to use recorder option on latex/pdflatex @@ -1692,6 +1601,8 @@ while ($_ = $ARGV[0]) elsif (/^-diagnostics/) { $diagnostics = 1; } elsif (/^-dvi$/) { $dvi_mode = 1; } elsif (/^-dvi-$/) { $dvi_mode = 0; } + elsif (/^-emulate-aux-dir$/) { $emulate_aux = 1; } + elsif (/^-emulate-aux-dir-$/) { $emulate_aux = 0; } elsif (/^-f$/) { $force_mode = 1; } elsif (/^-f-$/) { $force_mode = 0; } elsif (/^-g$/) { $go_mode = 1; } @@ -1752,6 +1663,7 @@ while ($_ = $ARGV[0]) # N.B. This has already been obeyed. } elsif (/^-nobib(tex|)fudge$/) { $bibtex_fudge = 0; } + elsif (/^-noemulate-aux-dir$/) { $emulate_aux = 0; } elsif (/^-no(make|)indexfudge$/) { $makeindex_fudge = 0; } elsif ( /^-output-directory=(.*)$/ ||/^-outdir=(.*)$/ ) { $out_dir = $1; @@ -1958,7 +1870,8 @@ warn "$My_name: This is $version_details, version: $version_num.\n", unless $silent; -if ( ($out_dir ne '') && ($aux_dir eq '') ){ +if ( $aux_dir eq '' ){ +# ????????????This may be wrong, given MiKTeX's behavior $aux_dir = $out_dir; } @@ -2373,58 +2286,10 @@ foreach $filename ( @file_list ) local $pdflatex = $pdflatex; local $xelatex = $xelatex; - # Ensure the output/auxiliary directories exist, if need be - if ( $out_dir ) { - if ( ! -e $out_dir ) { - warn "$My_name: making output directory '$out_dir'\n" - if ! $silent; - make_path $out_dir; - } - elsif ( ! -d $out_dir ) { - warn "$My_name: you requested output directory '$out_dir',\n", - " but an ordinary file of the same name exists, which will\n", - " probably give an error later\n"; - } - } - - if ( $aux_dir && ($aux_dir ne $out_dir) ) { - # N.B. If $aux_dir and $out_dir are the same, then the -output-directory - # option is sufficient, especially because the -aux-directory exists - # only in MiKTeX, not in TeXLive. - if ( ! -e $aux_dir ) { - warn "$My_name: making auxiliary directory '$aux_dir'\n" - if ! $silent; - make_path $aux_dir; - } - elsif ( ! -d $aux_dir ) { - warn "$My_name: you requested aux directory '$aux_dir',\n", - " but an ordinary file of the same name exists, which will\n", - " probably give an error later\n"; - } - } - - if ($normalize_names) { - $aux_dir = normalize_filename($aux_dir); - $out_dir = normalize_filename($out_dir); - } - set_dirs_etc(); - if ($diagnostics) { - warn "$My_name: Cwd: '", good_cwd(), "'\n"; - warn "$My_name: Normalized aux dir and out dir: '$aux_dir', '$out_dir'\n"; - warn "$My_name: and combining forms: '$aux_dir1', '$out_dir1'\n"; - } - if ( $out_dir && ($out_dir ne '.') ) { - add_option( "-output-directory=$quote$out_dir$quote", - \$latex, \$pdflatex, \$lualatex, \$xelatex ); - } - if ( $aux_dir && ($aux_dir ne '.') && ($aux_dir ne $out_dir) ) { - # N.B. If $aux_dir and $out_dir are the same, then the -output-directory - # option is sufficient, especially because the -aux-directory exists - # only in MiKTeX, not in TeXLive. - add_option( "-aux-directory=$quote%V$quote", - \$latex, \$pdflatex, \$lualatex, \$xelatex ); - } + &normalize_aux_out_ETC; + # Set -output-directory and -aux-directory options for *latex + &set_aux_out_options; &set_names; @@ -2438,7 +2303,6 @@ foreach $filename ( @file_list ) rdb_one_rule( 'view', sub{ $view_file = $$Psource; } ); if ( $cleanup_mode > 0 ) { -# ?? MAY NEED TO FIX THE FOLLOWING IF $aux_dir or $out_dir IS SET. my %other_generated = (); my @index_bibtex_generated = (); my @aux_files = (); @@ -2742,14 +2606,10 @@ if ($failure_count > 0) { } if ( $where_log == 2 ) { - warn "$My_name: You requested aux_dir '$aux_dir_requested',\n". - " but '$aux_dir' was used by the *latex engine.\n". - " That indicates a configuration error.\n"; - if ( ($tex_distribution !~ /^MiKTeX/i) && ($aux_dir_requested ne $out_dir_requested) ) { - warn " Probably you set different aux and out directories,\n". - " but that is not supported by your TeX distribution.\n". - " The only current distribution supporting this is MiKTeX.\n"; - } + warn "$My_name: You requested aux_dir '$aux_dir_requested',\n", + " but '$out_dir' was used for the .log file etc, and I couldn't\n", + " correct the problem, even by setting emulation of aux_dir on.\n", + " There is a strong suspicion of a bug in $my_name or a configuration error.\n"; } @@ -2850,27 +2710,27 @@ sub ensure_path { print "Set environment variable $var='$ENV{$var}'\n"; } } -} +} #END ensure_path ############################################################# -sub set_dirs_etc { - # Normalize $out_dir and $aux_dir, so that if they have a non-trivial last - # component, any trailing '/' is removed. - # Then set $out_dir1 and $aux_dir1 to have a directory separator character - # '/' added if needed to give forms suitable for direct concatenation with - # a filename. These are needed for substitutions like %Y%R. - # Nasty cases of dir_name: "/" on all systems, "A:", "A:/" etc on MS-Win - # Then set some TeX-related environment variables. - $out_dir = dirname_no_tail( $out_dir ); +sub normalize_aux_out_ETC { + # 1. Normalize $out_dir and $aux_dir, so that if they have a non-trivial last + # component, any trailing '/' is removed. + # 2. Set $out_dir1 and $aux_dir1 to have a directory separator character + # '/' added if needed to give forms suitable for direct concatenation with + # a filename. These are needed for substitutions like %Y%R. + # Nasty cases of dir_name: "/" on all systems, "A:", "A:/" etc on MS-Win + # 3. Set some TeX-related environment variables. + # 4. Ensure the aux and out directories exist $aux_dir = dirname_no_tail( $aux_dir ); - $out_dir1 = $out_dir; + $out_dir = dirname_no_tail( $out_dir ); + if ($normalize_names) { + foreach ( $aux_dir, $out_dir ) { $_ = normalize_filename_abs($_); } + } $aux_dir1 = $aux_dir; - $out_dir_abs = abs_path($out_dir); - $out_dir1_abs = $out_dir_abs; - $aux_dir_abs = abs_path($aux_dir); - $aux_dir1_abs = $aux_dir_abs; - foreach ( $aux_dir1, $out_dir1, $aux_dir1_abs, $out_dir1_abs ) { + $out_dir1 = $out_dir; + foreach ( $aux_dir1, $out_dir1 ) { if ( ($_ ne '') && ! m([\\/\:]$) ) { # Add a trailing '/' if necessary to give a string that can be # correctly concatenated with a filename: @@ -2891,30 +2751,88 @@ sub set_dirs_etc { # Convert $aux_dir to absolute path to make the search path invariant # under change of directory. foreach ( 'BIBINPUTS', 'TEXINPUTS' ) { - ensure_path( $_, $aux_dir_abs ); + ensure_path( $_, $aux_dir ); } # Set TEXMFOUTPUT so that when the aux_dir is not a subdirectory # of the cwd (or below), bibtex and makeindex can write to it. # Otherwise, security precautions in these programs will prevent - # them from writing there. + # them from writing there, on TeXLive. MiKTeX is different: see + # below. # The security issues concern **document-controlled** writing of # files, when bibtex or makeindex is invoked directly by a # document. In contrast, here $aux_dir is set by latexmk, not by # the document. (See the main texmf.cnf file in a TeXLive - # distribution for some information.) The security issues here - # appear to be identical to those when giving an - # -output-directory=... option to *latex. - # CONSTRAINTS: - # 1. This works in the aux dir is an an absolute path pointing to a - # higher-level directory, but NOT when it is a relative path, e.g., - # "../build". - # 2. The directories for files on the command line given to bibtex - # and makeindex must be exactly the same as the value in $aux_dir. - # This is ensured by the way in which the command strings are - # constructed. - $ENV{TEXMFOUTPUT} = $aux_dir_abs; + # distribution for some information on security issues.) + # + # PROPERTIES: + # 1. In TeXLive, the use of TEXMFOUTPUT works if + # (a) the directory given is an an absolute path, + # AND (b) the path contains no .. pieces + # AND (c) the directory component of the filename(s) on the command + # line for makeindex and bibtex is exactly the same string as + # for the directory named in TEXMFOUTPUT. + # 2. In MiKTeX, bibtex has none of the security restrictions; but + # makeindex has, and the use of TEXMFOUTPUT has no effect. + # So the following is only needed for TeXLive. + $ENV{TEXMFOUTPUT} = $aux_dir; + } + + # Ensure the output/auxiliary directories exist, if need be + if ( $out_dir ) { + make_path_mod( $out_dir, 'output' ); } -} + + if ( $aux_dir && ($aux_dir ne $out_dir) ) { + make_path_mod( $aux_dir, 'auxiliary' ); + } + + if ($diagnostics) { + warn "$My_name: Cwd: '", good_cwd(), "'\n"; + warn "$My_name: Normalized aux dir and out dir: '$aux_dir', '$out_dir'\n"; + warn "$My_name: and combining forms: '$aux_dir1', '$out_dir1'\n"; + } + +} #END normalize_aux_out_ETC + +############################################################# + +sub set_aux_out_options { + # Set -output-directory and -aux-directory options for *latex. Use + # placeholders for substitutions so that correct value is put in at + # runtime. + # N.B. At this point, empty $aux_dir means cwd, unlike the definition + # used in initialization stage of latexmk. + if ($emulate_aux) { + if ( $aux_dir && ($aux_dir ne '.') ) { + # N.B. Set **output** directory to **aux_dir**, rather than + # out_dir. If aux and out dirs are are different, then we'll move + # the relevant files (.pdf, .ps, .dvi, .xdv, .fls to the output + # directory after running *latex. + add_option( "-output-directory=%V", + \$latex, \$pdflatex, \$lualatex, \$xelatex ); + } + } + else { + if ( $out_dir && ($out_dir ne '.') ) { + add_option( "-output-directory=%W", + \$latex, \$pdflatex, \$lualatex, \$xelatex ); + } + if ( $aux_dir ne $out_dir ) { + # N.B. If $aux_dir and $out_dir are the same, then the + # -output-directory option is sufficient, especially because + # the -aux-directory exists only in MiKTeX, not in TeXLive. + if ($aux_dir) { + add_option( "-aux-directory=%V", + \$latex, \$pdflatex, \$lualatex, \$xelatex ); + } + else { + # Must have a non-empty string for argument of -aux-directory: + add_option( "-aux-directory=.", + \$latex, \$pdflatex, \$lualatex, \$xelatex ); + } + } + } +} #END set_aux_out_options ############################################################# @@ -3284,7 +3202,6 @@ sub do_cusdep { # Source does not exist. Users of this rule will need to turn # it off when custom dependencies are reset if ( !$silent ) { -## ??? Was commented out. 1 Sep. 2008 restored, for cusdep no-file-exists issue warn "$My_name: In trying to apply custom-dependency rule\n", " to make '$$Pdest' from '$$Psource'\n", " the source file has disappeared since the last run\n"; @@ -3976,6 +3893,8 @@ sub print_help " -dvi- - turn off required dvi\n", " -e - Execute specified Perl code (as part of latexmk start-up\n", " code)\n", + " -emulate-aux-dir - emulate -aux-directory option for *latex\n", + " -emulate-aux-dir- - use -aux-directory option with *latex\n", " -f - force continued processing past errors\n", " -f- - turn off forced continuing processing past errors\n", " -gg - Super go mode: clean out generated files (-CA), and then\n", @@ -4014,6 +3933,7 @@ sub print_help " -nobibtex - never use bibtex\n", " -nobibfudge or -nobibtexfudge - don't change directory when running bibtex\n", " -nodependents - Do not show list of dependent files after processing\n", + " -noemulate-aux-dir - use -aux-directory option with *latex\n", " -noindexfudge or -nomakeindexfudge - don't change directory when running makeindex\n", " -norc - omit automatic reading of system, user and project rc files\n", " -output-directory=dir or -outdir=dir\n", @@ -4519,6 +4439,25 @@ sub set_names { #************************************************** +sub move_out_files_from_aux { + # Move output and fls files to out_dir + # Omit 'xdv', that goes to aux_dir (as with MiKTeX). It's not final output. + foreach my $ext ( 'fls', 'dvi', 'pdf', 'ps' ) { + # Include fls file, because MiKTeX puts it in out_dir, rather than + # aux_dir, which would seem more natural. We must maintain + # compatibility. + my $from = "$aux_dir1$root_filename.$ext"; + my $to = "$out_dir1$root_filename.$ext" ; + if ( test_gen_file( $from ) ) { + if (! $silent) { warn "$My_name: Moving '$from' to '$to'\n"; } + my $ret = move( $from, $to ); + if ( ! $ret ) { die " That failed, with message '$!'\n";} + } + } +} + +#*************************************************** + sub parse_log { # Scan log file for: dependent files # reference_changed, bad_reference, bad_citation @@ -5335,10 +5274,11 @@ sub find_set_log { # to (*)latex. # Use of $aux_dir different to $out_dir, when (*)latex doesn't support # the -aux-directory option (notably with TeXLive distribution). - if ($where_log >= 0) { - # .log file was found on previous run. No need to repeat search, since - # if the location were to change from run to run, we'd have other - # serious difficulties that are to hard to deal with. + if ($where_log == 1) { + # .log file was found in correct place on previous run. + # So there's no need to repeat search, since if the location were to + # change from run to run, we'd have other serious difficulties that are + # to hard to deal with. return; } if ( test_gen_file( "$aux_dir1$root_filename.log" ) ) { @@ -5349,9 +5289,22 @@ sub find_set_log { # .log file is in out_dir not in aux_dir. # Presumably there is a configuration error # that prevents aux_dir from being used by latex. - # So change $aux_dir to the actually used value. - $where_log = 2; - $aux_dir = $out_dir; + warn "$My_name: .log file in '$out_dir' instead of expected '$aux_dir'\n"; + if ($emulate_aux) { + warn " But emulate_aux is on, so that should not happen\n", + " I'll switch aux_dir to equal out_dir\n"; + $where_log = 2; + $aux_dir = $out_dir; + } + else { + warn " But emulate_aux is off. So I'll turn it on.\n"; + $emulate_aux = 1; + foreach ( $$Pext_cmd, $$Pint_cmd ) { + s/ -output-directory=[^ ]*(?= )//g; + s/ -aux(-directory=[^ ]*)(?= )/ -output$1/g; + } + print "========== '$$Pext_cmd' '$$Pint_cmd'\n"; + } } elsif ( test_gen_file( "$root_filename.log" ) ) { # .log file is not in out_dir nor in aux_dir, but is in cwd. @@ -5373,7 +5326,7 @@ sub find_set_log { warn "$My_name: Changed aux_dir from '$aux_dir_requested' to '$aux_dir'\n". " to allow for probable configuration error\n"; # Allow for the changes associated with change of $aux_dir: - &set_dirs_etc; + &normalize_aux_out_ETC; &set_names; warn "$My_name: Actual .log file is\n", " '$log_name'\n", @@ -5381,11 +5334,12 @@ sub find_set_log { " '$aux_dir_requested/$root_filename.log'\n", " that seemed to be intended.\n"; } -} +} #END find_set_log #************************************************************ sub parse_fls { + my $start_time = processing_time(); my ($fls_name, $Pinputs, $Poutputs, $Pfirst_read_after_write, $Ppwd_latex ) = @_; %$Pinputs = %$Poutputs = %$Pfirst_read_after_write = (); my $fls_file = new FileHandle; @@ -5538,10 +5492,9 @@ sub normalize_filename { my ( $file, @dirs ) = @_; my $file1 = $file; # Saved original value my $cwd = good_cwd(); - my $cwd1 = cwd(); # Normalize files to use / to separate directory components: # (Note both / and \ are allowed under MSWin.) - foreach ($cwd, $cwd1, $file, @dirs) { + foreach ($cwd, $file, @dirs) { s(\\)(/)g; $_ = dirname_no_tail( $_ ); } @@ -5549,7 +5502,7 @@ sub normalize_filename { # Remove initial component equal to current working directory. # Use \Q and \E round directory name in regex to avoid interpretation # of metacharacters in directory name: - foreach my $dir ( @dirs, '.', $cwd, $cwd1 ) { + foreach my $dir ( @dirs, '.', $cwd ) { if ( $dir =~ /^\s*$/ ) { # All spaces, nothing to do. next; @@ -5571,10 +5524,19 @@ sub normalize_filename { $file = ''; } return $file; -} +} #END normalize_filename # ------------------------------ +sub normalize_filename_abs { + # Convert filename to be either + # absolute path in canonical form + # or relative to cwd. + return normalize_filename( abs_path($_[0]) ); +} + +#----------------------------- + sub normalize_clean_filename { # Usage: normalize_clean_filename( filename [, extra forms of name of cwd] ) # Same as normalize_filename, but first remove any double quotes, as @@ -7647,8 +7609,6 @@ sub rdb_make1 { if ( !$$Plast_message ) { $$Plast_message = "Run of rule '$rule' gave a non-zero error code"; } -# !!?? $failure_msg = $$Plast_message; - } foreach ( keys %$PHsource_rules ) { $$PHsource_rules{$_} = $pass{$_}; @@ -7935,6 +7895,9 @@ sub rdb_run1 { } } + if ( ($$Pcmd_type eq 'primary') && ( $aux_dir ne $out_dir ) ) { + &move_out_files_from_aux; + } $updated = 1; if ($$Ptest_kind == 3) { # We are time-criterion first time only. Now switch to @@ -8070,7 +8033,6 @@ sub Run_subst { #----------------- sub rdb_primary_run { -#?? See multipass_run in previous version Aug 2007 for issues # Call: rdb_primary_run # Assumes contexts for: recursion, make, & rule. # Assumes (a) the rule is a primary, @@ -8157,12 +8119,6 @@ sub rdb_primary_run { $updated = 1; # Flag that some dependent file has been remade -#?? # Fix the state of the files as of now: this will solve the -#?? # problem of latex and pdflatex interfering with each other, -#?? # at the expense of some non-optimality -#?? #?? Check this is correct: -#?? &rdb_update_files; - if ( $diagnostics ) { print "$My_name: Rules after run: \n"; rdb_show(); @@ -8251,7 +8207,6 @@ sub rdb_flag_changes_here { if ($$Pout_of_date) { push @rules_to_apply, $rule; } -#?? print "======== flag: $rule $$Pout_of_date ==========\n"; } #END rdb_flag_changes_here #************************************************************ @@ -8405,7 +8360,6 @@ sub rdb_diagnose_changes { # # When the action subroutine(s) are actually called, a context for the # rule and/or file (as appropriate) is given by setting named -## NEW ?? # variables to REFERENCES to the relevant data values. These can be # used to retrieve and set the data values. As a convention, # references to scalars are given by variables named start with "$P", @@ -8413,12 +8367,6 @@ sub rdb_diagnose_changes { # "$PAint_cmd", and references to hashes with "$PH", as in "$PHsource". # After the action subroutine has finished, checks for data # consistency may be made. -## ??? OLD -# variables to the relevant data values. After the action subroutine -# has finished, the database is updated with the values of these named -# variables, with any necessary consistency checks. Thus the action -# subroutines can act on sensibly named variables without needed to -# know the database structure. # # The only routines that actually use the database structure and need # to be changed if that is changed are: (a) the routines rdb_one_rule @@ -9417,9 +9365,6 @@ sub find_file_list1 { my $ref_search = $_[3]; my @not_found = (); -#?? show_array( "=====find_file_list1. Suffix: '$suffix'\n Source:", @$ref_input ); -#?? show_array( " Bibinputs:", @$ref_search ); - my @return_list = (); # Generate list in local array, since input # and output arrays may be same my $retcode = 0; @@ -9467,6 +9412,33 @@ sub unlink_or_move { #************************************************************ +sub make_path_mod { + my $dir = $_[0]; + my $title = $_[1]; + my $ret = 0; + if ( (! -e $dir) && (! -l $dir) ) { + warn "$My_name: making $title directory '$dir'\n" + if ! $silent; + make_path( $dir ); + } + elsif ( -l $dir ) { + $ret = 1; + warn "$My_name: you requested $title directory '$dir',\n", + " but there exists a symlink that has the same name, but\n", + " does not point to anything. I won't create a directory, and\n", + " that will probably give an error later.\n"; + } + elsif ( ! -d $dir ) { + $ret = 2; + warn "$My_name: you requested $title directory '$dir',\n", + " but an ordinary file of the same name exists, which will\n", + " probably give an error later.\n"; + } + return $ret; +} + +#************************************************************ + sub kpsewhich { # Usage: kpsewhich( filespec, ...) # Returns array of files with paths as found by kpsewhich diff --git a/Build/source/texk/texlive/linked_scripts/texlive/tlmgr.pl b/Build/source/texk/texlive/linked_scripts/texlive/tlmgr.pl index becdce9782f..648d5a7e4f7 100755 --- a/Build/source/texk/texlive/linked_scripts/texlive/tlmgr.pl +++ b/Build/source/texk/texlive/linked_scripts/texlive/tlmgr.pl @@ -1,12 +1,12 @@ #!/usr/bin/env perl -# $Id: tlmgr.pl 58961 2021-04-22 00:55:07Z preining $ +# $Id: tlmgr.pl 59064 2021-05-03 17:37:44Z karl $ # # Copyright 2008-2021 Norbert Preining # This file is licensed under the GNU General Public License version 2 # or any later version. -my $svnrev = '$Revision: 58961 $'; -my $datrev = '$Date: 2021-04-21 17:55:07 -0700 (Wed, 21 Apr 2021) $'; +my $svnrev = '$Revision: 59064 $'; +my $datrev = '$Date: 2021-05-03 19:37:44 +0200 (Mon, 03 May 2021) $'; my $tlmgrrevision; my $tlmgrversion; my $prg; @@ -5249,13 +5249,18 @@ sub uninstall_texlive { return if !check_on_writable(); init_local_db(0); + if (defined($opts{"dry-run"})) { + # TODO: we should implement --dry-run for remove --all. + print "Sorry, no --dry-run with remove --all; goodbye.\n"; + return ($F_OK | $F_NOPOSTACTION); + } my $force = defined($opts{"force"}) ? $opts{"force"} : 0; if (!$force) { print("If you answer yes here the whole TeX Live installation here,\n", "under ", $localtlpdb->root, ", will be removed!\n"); print "Remove TeX Live (y/N): "; my $yesno = ; - if ($yesno !~ m/^y(es)?$/i) { + if (!defined($yesno) || $yesno !~ m/^y(es)?$/i) { print "Ok, cancelling the removal!\n"; return ($F_OK | $F_NOPOSTACTION); } @@ -7215,14 +7220,16 @@ and the repository are not compatible: # check for being frozen if ($remotetlpdb->config_frozen) { my $frozen_msg = < (L) -yourself if you are using this feature and want stale symlinks removed. +Except with C<--all>, this C action does not automatically +remove symlinks to executables from system directories; you need to run +C (L) yourself if you remove an individual +package with a symlink in a system directory. =head2 repository @@ -10116,7 +10124,7 @@ This script and its documentation were written for the TeX Live distribution (L) and both are licensed under the GNU General Public License Version 2 or later. -$Id: tlmgr.pl 58961 2021-04-22 00:55:07Z preining $ +$Id: tlmgr.pl 59064 2021-05-03 17:37:44Z karl $ =cut # test HTML version: pod2html --cachedir=/tmp tlmgr.pl >/tmp/tlmgr.html diff --git a/Build/source/texk/texlive/linked_scripts/texlive/updmap.pl b/Build/source/texk/texlive/linked_scripts/texlive/updmap.pl index f2cfbe78693..187fd50a36b 100755 --- a/Build/source/texk/texlive/linked_scripts/texlive/updmap.pl +++ b/Build/source/texk/texlive/linked_scripts/texlive/updmap.pl @@ -1,5 +1,5 @@ #!/usr/bin/env perl -# $Id: updmap.pl 58960 2021-04-22 00:52:00Z preining $ +# $Id: updmap.pl 59062 2021-05-03 15:46:54Z karl $ # updmap - maintain map files for outline fonts. # (Maintained in TeX Live:Master/texmf-dist/scripts/texlive.) # @@ -14,7 +14,7 @@ # the original versions were licensed under the following agreement: # Anyone may freely use, modify, and/or distribute this file, without -my $svnid = '$Id: updmap.pl 58960 2021-04-22 00:52:00Z preining $'; +my $svnid = '$Id: updmap.pl 59062 2021-05-03 15:46:54Z karl $'; my $TEXMFROOT; BEGIN { @@ -27,10 +27,10 @@ BEGIN { unshift(@INC, "$TEXMFROOT/tlpkg"); } -my $lastchdate = '$Date: 2021-04-22 02:52:00 +0200 (Thu, 22 Apr 2021) $'; +my $lastchdate = '$Date: 2021-05-03 17:46:54 +0200 (Mon, 03 May 2021) $'; $lastchdate =~ s/^\$Date:\s*//; $lastchdate =~ s/ \(.*$//; -my $svnrev = '$Revision: 58960 $'; +my $svnrev = '$Revision: 59062 $'; $svnrev =~ s/^\$Revision:\s*//; $svnrev =~ s/\s*\$$//; my $version = "r$svnrev ($lastchdate)"; @@ -1338,26 +1338,27 @@ sub mkMaps { } } - # all kind of warning messages + # all kinds of warning messages if ($first_time_creation_in_usermode) { print_and_log(" ************************************************************* * * * WARNING: you are switching to updmap's per-user mappings. * -* Please read the following explanations. * +* Please read the following warnings! * * * ************************************************************* -You have run updmap-user (as opposed to updmap-sys) for the first time; this -has created configuration files which are local to your personal account. +You have run updmap-user (as opposed to updmap-sys) for the first time; +this has created configuration files which are local to your personal account. -Any changes in system map files will *not* be automatically reflected in -your files; furthermore, running updmap-sys will no longer have any -effect for you. As a consequence, you have to rerun updmap-user yourself -after any change in the system directories; for example, if a new font -package is added. +From now on, any changes in system map files will *not* be automatically +reflected in your files; furthermore, running updmap-sys (as is done +automatically) will no longer have any effect for you. -See http://tug.org/texlive/scripts-sys-user.html for details. +As a consequence, you yourself have to rerun updmap-user yourself after +any change in the *system* directories! For example, if a new font +package is added or existing mappings change, which happens frequently. +See https://tug.org/texlive/scripts-sys-user.html for details. If you want to undo this, remove the files mentioned above. @@ -2262,10 +2263,10 @@ Usage: $prg [-user|-sys] [OPTION] ... [COMMAND] or: $prg-user [OPTION] ... [COMMAND] or: $prg-sys [OPTION] ... [COMMAND] -Update the default font map files used by pdftex (pdftex.map), dvips -(psfonts.map), and dvipdfm(x), and optionally pxdvi, as determined by -all configuration files updmap.cfg (the ones returned by running -"kpsewhich --all updmap.cfg", but see below). +Update the default font map files used by pdftex and dvipdfm(x) +(pdftex.map), dvips (psfonts.map), and optionally pxdvi, as determined +by all configuration files updmap.cfg (usually the ones returned by +running "kpsewhich --all updmap.cfg", but see below). Among other things, these map files are used to determine which fonts should be used as bitmaps and which as outlines, and to determine which @@ -2274,11 +2275,11 @@ font files are included, typically subsetted, in the PDF or PostScript output. updmap-sys (or updmap -sys) is intended to affect the system-wide configuration, while updmap-user (or updmap -user) affects personal configuration files only, overriding the system files. -As a consequence, once updmap-user has been run, even a single time, -running updmap-sys no longer has any effect. (updmap-sys issues a -warning in this situation.) -See http://tug.org/texlive/scripts-sys-user.html for details. +As a consequence, once updmap-user has been run, even a single time, +running updmap-sys no longer has any effect. updmap-sys issues a +warning about this, since it is rarely desirable. +See https://tug.org/texlive/scripts-sys-user.html for details. By default, the TeX filename database (ls-R) is also updated. @@ -2295,8 +2296,6 @@ historical reasons. A general overview: installation time, by the system installer or the package manager or by hand, and not (by default) by updmap. -Good luck. - Options: --cnffile FILE read FILE for the updmap configuration (can be given multiple times, in which case @@ -2309,28 +2308,28 @@ Options: --copy cp generic files rather than using symlinks --force recreate files even if config hasn't changed --nomkmap do not recreate map files - --nohash do not run texhash + --nohash do not run mktexlsr (a.k.a. texhash) --sys affect system-wide files (equivalent to updmap-sys) --user affect personal files (equivalent to updmap-user) -n, --dry-run only show the configuration, no output --quiet, --silent reduce verbosity Commands: - --help show this message and exit - --version show version information and exit - --showoption OPTION show the current setting of OPTION - --showoptions OPTION show possible settings for OPTION - --setoption OPTION VALUE set OPTION to value; option names below - --setoption OPTION=VALUE as above, just different syntax - --enable MAPTYPE MAPFILE add "MAPTYPE MAPFILE" to updmap.cfg, - where MAPTYPE is Map, MixedMap, or KanjiMap - --enable Map=MAPFILE add \"Map MAPFILE\" to updmap.cfg - --enable MixedMap=MAPFILE add \"MixedMap MAPFILE\" to updmap.cfg - --enable KanjiMap=MAPFILE add \"KanjiMap MAPFILE\" to updmap.cfg - --disable MAPFILE disable MAPFILE, of whatever type - --listmaps list all maps (details below) - --listavailablemaps list available maps (details below) - --syncwithtrees disable unavailable map files in updmap.cfg + --help show this message and exit + --version show version information and exit + --showoption OPTION show the current setting of OPTION + --showoptions OPTION show possible settings for OPTION + --setoption OPTION VALUE set OPTION to value; option names below + --setoption OPTION=VALUE as above, just different syntax + --enable MAPTYPE MAPFILE add "MAPTYPE MAPFILE" to updmap.cfg, + where MAPTYPE is Map, MixedMap, or KanjiMap + --enable Map=MAPFILE add \"Map MAPFILE\" to updmap.cfg + --enable MixedMap=MAPFILE add \"MixedMap MAPFILE\" to updmap.cfg + --enable KanjiMap=MAPFILE add \"KanjiMap MAPFILE\" to updmap.cfg + --disable MAPFILE disable MAPFILE, of whatever type + --listmaps list all maps (details below) + --listavailablemaps list available maps (details below) + --syncwithtrees disable unavailable map files in updmap.cfg The main output: @@ -2360,7 +2359,7 @@ Explanation of the map types: The only difference between Map and MixedMap is that MixedMap entries are not added to psfonts_pk.map. The purpose is to help users with - devices that render Type 1 outline fonts worse than mode-tuned Type 1 + devices that render Type 1 outline fonts worse than mode-tuned Type 3 bitmap fonts. So, MixedMap is used for fonts that are available as both Type 1 and Metafont. @@ -2463,7 +2462,7 @@ Where and which updmap.cfg changes are saved: config file, a higher-level one can be used. That way, the distribution's settings can be overridden system-wide using TEXMFLOCAL, and system settings can be overridden again in a - particular user's TEXMFHOME. + particular user's TEXMFHOME or TEXMFCONFIG. Resolving multiple definitions of a font: @@ -2522,11 +2521,11 @@ will be read and written, give the -n option (or read the source). The log file is written to TEXMFVAR/web2c/updmap.log. For step-by-step instructions on making new fonts known to TeX, read -http://tug.org/fonts/fontinstall.html. For even more terse +https://tug.org/fonts/fontinstall.html. For even more terse instructions, read the beginning of the main updmap.cfg file. Report bugs to: tex-live\@tug.org -TeX Live home page: +TeX Live home page: EOF ; print &version(); -- cgit v1.2.3