reautoconf with automake-1.17

git-svn-id: svn://tug.org/texlive/trunk@71780 c570f23f-e606-0410-a88d-b1316a301751

4 files changed, 645 insertions, 275 deletions

diff --git a/Build/source/libs/teckit/Makefile.in b/Build/source/libs/teckit/Makefile.in
index 0b2953a1d51..abfd59a5f31 100644
--- a/Build/source/libs/teckit/Makefile.in
+++ b/Build/source/libs/teckit/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.16.5 from Makefile.am.
+# Makefile.in generated by automake 1.17 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2021 Free Software Foundation, Inc.
+# Copyright (C) 1994-2024 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -71,6 +71,8 @@ am__make_running_with_option = \
   test $$has_opt = yes
 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+am__rm_f = rm -f $(am__rm_f_notfound)
+am__rm_rf = rm -rf $(am__rm_f_notfound)
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -111,17 +113,19 @@ am__installdirs = "$(DESTDIR)$(bindir)"
 PROGRAMS = $(bin_PROGRAMS)
 LIBRARIES = $(noinst_LIBRARIES)
 AR = ar
-ARFLAGS = cru
+ARFLAGS = cr
 AM_V_AR = $(am__v_AR_@AM_V@)
 am__v_AR_ = $(am__v_AR_@AM_DEFAULT_V@)
 am__v_AR_0 = @echo "  AR      " $@;
 am__v_AR_1 = 
 libTECkit_a_AR = $(AR) $(ARFLAGS)
+libTECkit_a_RANLIB = $(RANLIB)
 libTECkit_a_LIBADD =
 am__dirstamp = $(am__leading_dot)dirstamp
 nodist_libTECkit_a_OBJECTS = @TECKIT_TREE@/source/Engine.$(OBJEXT)
 libTECkit_a_OBJECTS = $(nodist_libTECkit_a_OBJECTS)
 libTECkit_Compiler_a_AR = $(AR) $(ARFLAGS)
+libTECkit_Compiler_a_RANLIB = $(RANLIB)
 libTECkit_Compiler_a_LIBADD =
 nodist_libTECkit_Compiler_a_OBJECTS =  \
 	@TECKIT_TREE@/source/Compiler.$(OBJEXT) \
@@ -253,10 +257,9 @@ am__base_list = \
   sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
   sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
 am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
+  { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+  || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+       $(am__cd) "$$dir" && echo $$files | $(am__xargs_n) 40 $(am__rm_f); }; \
   }
 am__recheck_rx = ^[ 	]*:recheck:[ 	]*
 am__global_test_result_rx = ^[ 	]*:global-test-result:[ 	]*
@@ -344,6 +347,7 @@ am__sh_e_setup = case $$- in *e*) set +e;; esac
 # Default flags passed to test drivers.
 am__common_driver_flags = \
   --color-tests "$$am__color_tests" \
+  $$am__collect_skipped_logs \
   --enable-hard-errors "$$am__enable_hard_errors" \
   --expect-failure "$$am__expect_failure"
 # To be inserted before the command running the test.  Creates the
@@ -368,6 +372,11 @@ if test -f "./$$f"; then dir=./;			\
 elif test -f "$$f"; then dir=;				\
 else dir="$(srcdir)/"; fi;				\
 tst=$$dir$$f; log='$@'; 				\
+if test -n '$(IGNORE_SKIPPED_LOGS)'; then		\
+  am__collect_skipped_logs='--collect-skipped-logs no';	\
+else							\
+  am__collect_skipped_logs='';				\
+fi;							\
 if test -n '$(DISABLE_HARD_ERRORS)'; then		\
   am__enable_hard_errors=no; 				\
 else							\
@@ -432,8 +441,8 @@ distdir = $(PACKAGE)-$(VERSION)
 top_distdir = $(distdir)
 am__remove_distdir = \
   if test -d "$(distdir)"; then \
-    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-      && rm -rf "$(distdir)" \
+    find "$(distdir)" -type d ! -perm -700 -exec chmod u+rwx {} ';' \
+      ; rm -rf "$(distdir)" \
       || { sleep 5 && rm -rf "$(distdir)"; }; \
   else :; fi
 am__post_remove_distdir = $(am__remove_distdir)
@@ -463,14 +472,16 @@ am__relativize = \
   done; \
   reldir="$$dir2"
 DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
+GZIP_ENV = -9
 DIST_TARGETS = dist-gzip
 # Exists only to be overridden by the user if desired.
 AM_DISTCHECK_DVI_TARGET = dvi
 distuninstallcheck_listfiles = find . -type f -print
 am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
   | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
-distcleancheck_listfiles = find . -type f -print
+distcleancheck_listfiles = \
+  find . \( -type f -a \! \
+            \( -name .nfs* -o -name .smb* -o -name .__afs* \) \) -print
 ACLOCAL = @ACLOCAL@
 AMTAR = @AMTAR@
 AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
@@ -540,8 +551,10 @@ ac_ct_CXX = @ac_ct_CXX@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
+am__rm_f_notfound = @am__rm_f_notfound@
 am__tar = @am__tar@
 am__untar = @am__untar@
+am__xargs_n = @am__xargs_n@
 bindir = @bindir@
 build = @build@
 build_alias = @build_alias@
@@ -669,12 +682,12 @@ config.h: stamp-h1
 	@test -f $@ || $(MAKE) $(AM_MAKEFLAGS) stamp-h1
 
 stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
-	@rm -f stamp-h1
-	cd $(top_builddir) && $(SHELL) ./config.status config.h
+	$(AM_V_at)rm -f stamp-h1
+	$(AM_V_GEN)cd $(top_builddir) && $(SHELL) ./config.status config.h
 $(srcdir)/config.h.in: @MAINTAINER_MODE_TRUE@ $(am__configure_deps) 
-	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
-	rm -f stamp-h1
-	touch $@
+	$(AM_V_GEN)($(am__cd) $(top_srcdir) && $(AUTOHEADER))
+	$(AM_V_at)rm -f stamp-h1
+	$(AM_V_at)touch $@
 
 distclean-hdr:
 	-rm -f config.h stamp-h1
@@ -716,19 +729,19 @@ uninstall-binPROGRAMS:
 	`; \
 	test -n "$$list" || exit 0; \
 	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+	cd "$(DESTDIR)$(bindir)" && $(am__rm_f) $$files
 
 clean-binPROGRAMS:
-	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+	-$(am__rm_f) $(bin_PROGRAMS)
 
 clean-noinstLIBRARIES:
-	-test -z "$(noinst_LIBRARIES)" || rm -f $(noinst_LIBRARIES)
+	-$(am__rm_f) $(noinst_LIBRARIES)
 @TECKIT_TREE@/source/$(am__dirstamp):
 	@$(MKDIR_P) @TECKIT_TREE@/source
-	@: > @TECKIT_TREE@/source/$(am__dirstamp)
+	@: >>@TECKIT_TREE@/source/$(am__dirstamp)
 @TECKIT_TREE@/source/$(DEPDIR)/$(am__dirstamp):
 	@$(MKDIR_P) @TECKIT_TREE@/source/$(DEPDIR)
-	@: > @TECKIT_TREE@/source/$(DEPDIR)/$(am__dirstamp)
+	@: >>@TECKIT_TREE@/source/$(DEPDIR)/$(am__dirstamp)
 @TECKIT_TREE@/source/Engine.$(OBJEXT):  \
 	@TECKIT_TREE@/source/$(am__dirstamp) \
 	@TECKIT_TREE@/source/$(DEPDIR)/$(am__dirstamp)
@@ -736,7 +749,7 @@ clean-noinstLIBRARIES:
 libTECkit.a: $(libTECkit_a_OBJECTS) $(libTECkit_a_DEPENDENCIES) $(EXTRA_libTECkit_a_DEPENDENCIES) 
 	$(AM_V_at)-rm -f libTECkit.a
 	$(AM_V_AR)$(libTECkit_a_AR) libTECkit.a $(libTECkit_a_OBJECTS) $(libTECkit_a_LIBADD)
-	$(AM_V_at)$(RANLIB) libTECkit.a
+	$(AM_V_at)$(libTECkit_a_RANLIB) libTECkit.a
 @TECKIT_TREE@/source/Compiler.$(OBJEXT):  \
 	@TECKIT_TREE@/source/$(am__dirstamp) \
 	@TECKIT_TREE@/source/$(DEPDIR)/$(am__dirstamp)
@@ -747,13 +760,13 @@ libTECkit.a: $(libTECkit_a_OBJECTS) $(libTECkit_a_DEPENDENCIES) $(EXTRA_libTECki
 libTECkit_Compiler.a: $(libTECkit_Compiler_a_OBJECTS) $(libTECkit_Compiler_a_DEPENDENCIES) $(EXTRA_libTECkit_Compiler_a_DEPENDENCIES) 
 	$(AM_V_at)-rm -f libTECkit_Compiler.a
 	$(AM_V_AR)$(libTECkit_Compiler_a_AR) libTECkit_Compiler.a $(libTECkit_Compiler_a_OBJECTS) $(libTECkit_Compiler_a_LIBADD)
-	$(AM_V_at)$(RANLIB) libTECkit_Compiler.a
+	$(AM_V_at)$(libTECkit_Compiler_a_RANLIB) libTECkit_Compiler.a
 @TECKIT_TREE@/source/Sample-tools/$(am__dirstamp):
 	@$(MKDIR_P) @TECKIT_TREE@/source/Sample-tools
-	@: > @TECKIT_TREE@/source/Sample-tools/$(am__dirstamp)
+	@: >>@TECKIT_TREE@/source/Sample-tools/$(am__dirstamp)
 @TECKIT_TREE@/source/Sample-tools/$(DEPDIR)/$(am__dirstamp):
 	@$(MKDIR_P) @TECKIT_TREE@/source/Sample-tools/$(DEPDIR)
-	@: > @TECKIT_TREE@/source/Sample-tools/$(DEPDIR)/$(am__dirstamp)
+	@: >>@TECKIT_TREE@/source/Sample-tools/$(DEPDIR)/$(am__dirstamp)
 @TECKIT_TREE@/source/Sample-tools/TECkit_Compile.$(OBJEXT):  \
 	@TECKIT_TREE@/source/Sample-tools/$(am__dirstamp) \
 	@TECKIT_TREE@/source/Sample-tools/$(DEPDIR)/$(am__dirstamp)
@@ -777,7 +790,7 @@ distclean-compile:
 
 $(am__depfiles_remade):
 	@$(MKDIR_P) $(@D)
-	@echo '# dummy' >$@-t && $(am__mv) $@-t $@
+	@: >>$@
 
 am--depfiles: $(am__depfiles_remade)
 
@@ -916,7 +929,6 @@ distclean-tags:
 am--fnord $(TEST_LOGS) $(TEST_LOGS:.log=.trs): $(am__force_recheck)
 am--force-recheck:
 	@:
-
 $(TEST_SUITE_LOG): $(TEST_LOGS)
 	@$(am__set_TESTS_bases); \
 	am__f_ok () { test -f "$$1" && test -r "$$1"; }; \
@@ -992,10 +1004,37 @@ $(TEST_SUITE_LOG): $(TEST_LOGS)
 	  result_count $$1 "XPASS:" $$xpass "$$red"; \
 	  result_count $$1 "ERROR:" $$error "$$mgn"; \
 	}; \
+	output_system_information () \
+	{ \
+          echo;                                     \
+	  { uname -a | $(AWK) '{                    \
+  printf "System information (uname -a):";          \
+  for (i = 1; i < NF; ++i)                          \
+    {                                               \
+      if (i != 2)                                   \
+        printf " %s", $$i;                          \
+    }                                               \
+  printf "\n";                                      \
+}'; } 2>&1;                                         \
+	  if test -r /etc/os-release; then          \
+	    echo "Distribution information (/etc/os-release):"; \
+	    sed 8q /etc/os-release;                 \
+	  elif test -r /etc/issue; then             \
+	    echo "Distribution information (/etc/issue):";      \
+	    cat /etc/issue;                         \
+	  fi;                                       \
+	}; \
+	please_report () \
+	{ \
+echo "Some test(s) failed.  Please report this to $(PACKAGE_BUGREPORT),";    \
+echo "together with the test-suite.log file (gzipped) and your system";      \
+echo "information.  Thanks.";                                                \
+	}; \
 	{								\
 	  echo "$(PACKAGE_STRING): $(subdir)/$(TEST_SUITE_LOG)" |	\
 	    $(am__rst_title);						\
 	  create_testsuite_report --no-color;				\
+	  output_system_information;                                    \
 	  echo;								\
 	  echo ".. contents:: :depth: 2";				\
 	  echo;								\
@@ -1015,26 +1054,25 @@ $(TEST_SUITE_LOG): $(TEST_LOGS)
 	create_testsuite_report --maybe-color;				\
 	echo "$$col$$br$$std";						\
 	if $$success; then :; else					\
-	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG)$${std}";		\
+	  echo "$${col}See $(subdir)/$(TEST_SUITE_LOG) for debugging.$${std}";\
 	  if test -n "$(PACKAGE_BUGREPORT)"; then			\
-	    echo "$${col}Please report to $(PACKAGE_BUGREPORT)$${std}";	\
+	    please_report | sed -e "s/^/$${col}/" -e s/'$$'/"$${std}"/; \
 	  fi;								\
 	  echo "$$col$$br$$std";					\
 	fi;								\
 	$$success || exit 1
 
 check-TESTS: 
-	@list='$(RECHECK_LOGS)';           test -z "$$list" || rm -f $$list
-	@list='$(RECHECK_LOGS:.log=.trs)'; test -z "$$list" || rm -f $$list
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@$(am__rm_f) $(RECHECK_LOGS)
+	@$(am__rm_f) $(RECHECK_LOGS:.log=.trs)
+	@$(am__rm_f) $(TEST_SUITE_LOG)
 	@set +e; $(am__set_TESTS_bases); \
 	log_list=`for i in $$bases; do echo $$i.log; done`; \
-	trs_list=`for i in $$bases; do echo $$i.trs; done`; \
-	log_list=`echo $$log_list`; trs_list=`echo $$trs_list`; \
+	log_list=`echo $$log_list`; \
 	$(MAKE) $(AM_MAKEFLAGS) $(TEST_SUITE_LOG) TEST_LOGS="$$log_list"; \
 	exit $$?;
 recheck: all 
-	@test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	@$(am__rm_f) $(TEST_SUITE_LOG)
 	@set +e; $(am__set_TESTS_bases); \
 	bases=`for i in $$bases; do echo $$i; done \
 	         | $(am__list_recheck_tests)` || exit 1; \
@@ -1063,7 +1101,7 @@ distdir: $(BUILT_SOURCES)
 
 distdir-am: $(DISTFILES)
 	$(am__remove_distdir)
-	test -d "$(distdir)" || mkdir "$(distdir)"
+	$(AM_V_at)$(MKDIR_P) "$(distdir)"
 	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
 	list='$(DISTFILES)'; \
@@ -1177,7 +1215,7 @@ dist dist-all:
 distcheck: dist
 	case '$(DIST_ARCHIVES)' in \
 	*.tar.gz*) \
-	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).tar.gz | $(am__untar) ;;\
+	  eval GZIP= gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
 	*.tar.bz2*) \
 	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
 	*.tar.lz*) \
@@ -1187,7 +1225,7 @@ distcheck: dist
 	*.tar.Z*) \
 	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
 	*.shar.gz*) \
-	  eval GZIP= gzip $(GZIP_ENV) -dc $(distdir).shar.gz | unshar ;;\
+	  eval GZIP= gzip -dc $(distdir).shar.gz | unshar ;;\
 	*.zip*) \
 	  unzip $(distdir).zip ;;\
 	*.tar.zst*) \
@@ -1287,21 +1325,21 @@ install-strip:
 	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
 	fi
 mostlyclean-generic:
-	-test -z "$(TEST_LOGS)" || rm -f $(TEST_LOGS)
-	-test -z "$(TEST_LOGS:.log=.trs)" || rm -f $(TEST_LOGS:.log=.trs)
-	-test -z "$(TEST_SUITE_LOG)" || rm -f $(TEST_SUITE_LOG)
+	-$(am__rm_f) $(TEST_LOGS)
+	-$(am__rm_f) $(TEST_LOGS:.log=.trs)
+	-$(am__rm_f) $(TEST_SUITE_LOG)
 
 clean-generic:
-	-test -z "$(CLEANFILES)" || rm -f $(CLEANFILES)
+	-$(am__rm_f) $(CLEANFILES)
 
 distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-	-rm -f @TECKIT_TREE@/source/$(DEPDIR)/$(am__dirstamp)
-	-rm -f @TECKIT_TREE@/source/$(am__dirstamp)
-	-rm -f @TECKIT_TREE@/source/Sample-tools/$(DEPDIR)/$(am__dirstamp)
-	-rm -f @TECKIT_TREE@/source/Sample-tools/$(am__dirstamp)
-	-test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
+	-$(am__rm_f) $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
+	-$(am__rm_f) $(DISTCLEANFILES)
+	-$(am__rm_f) @TECKIT_TREE@/source/$(DEPDIR)/$(am__dirstamp)
+	-$(am__rm_f) @TECKIT_TREE@/source/$(am__dirstamp)
+	-$(am__rm_f) @TECKIT_TREE@/source/Sample-tools/$(DEPDIR)/$(am__dirstamp)
+	-$(am__rm_f) @TECKIT_TREE@/source/Sample-tools/$(am__dirstamp)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -1313,7 +1351,7 @@ clean-am: clean-binPROGRAMS clean-generic clean-noinstLIBRARIES \
 
 distclean: distclean-recursive
 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-		-rm -f @TECKIT_TREE@/source/$(DEPDIR)/Compiler.Po
+	-rm -f @TECKIT_TREE@/source/$(DEPDIR)/Compiler.Po
 	-rm -f @TECKIT_TREE@/source/$(DEPDIR)/Engine.Po
 	-rm -f @TECKIT_TREE@/source/$(DEPDIR)/UnicodeNames.Po
 	-rm -f @TECKIT_TREE@/source/Sample-tools/$(DEPDIR)/TECkit_Compile.Po
@@ -1364,7 +1402,7 @@ installcheck-am:
 maintainer-clean: maintainer-clean-recursive
 	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
 	-rm -rf $(top_srcdir)/autom4te.cache
-		-rm -f @TECKIT_TREE@/source/$(DEPDIR)/Compiler.Po
+	-rm -f @TECKIT_TREE@/source/$(DEPDIR)/Compiler.Po
 	-rm -f @TECKIT_TREE@/source/$(DEPDIR)/Engine.Po
 	-rm -f @TECKIT_TREE@/source/$(DEPDIR)/UnicodeNames.Po
 	-rm -f @TECKIT_TREE@/source/Sample-tools/$(DEPDIR)/TECkit_Compile.Po
@@ -1454,3 +1492,10 @@ rebuild: $(rebuild_prereq)
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
+
+# Tell GNU make to disable its built-in pattern rules.
+%:: %,v
+%:: RCS/%,v
+%:: RCS/%
+%:: s.%
+%:: SCCS/s.%
diff --git a/Build/source/libs/teckit/aclocal.m4 b/Build/source/libs/teckit/aclocal.m4
index 8997c0fc77b..c525602ceb8 100644
--- a/Build/source/libs/teckit/aclocal.m4
+++ b/Build/source/libs/teckit/aclocal.m4
@@ -1,6 +1,6 @@
-# generated automatically by aclocal 1.16.5 -*- Autoconf -*-
+# generated automatically by aclocal 1.17 -*- Autoconf -*-
 
-# Copyright (C) 1996-2021 Free Software Foundation, Inc.
+# Copyright (C) 1996-2024 Free Software Foundation, Inc.
 
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -20,7 +20,7 @@ You have another version of autoconf.  It may work, but is not guaranteed to.
 If you have problems, you may need to regenerate the build system entirely.
 To do so, use the procedure documented by the package, typically 'autoreconf'.])])
 
-# Copyright (C) 2002-2021 Free Software Foundation, Inc.
+# Copyright (C) 2002-2024 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -32,10 +32,10 @@ To do so, use the procedure documented by the package, typically 'autoreconf'.])
 # generated from the m4 files accompanying Automake X.Y.
 # (This private macro should not be called outside this file.)
 AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.16'
+[am__api_version='1.17'
 dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
 dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.16.5], [],
+m4_if([$1], [1.17], [],
       [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
 ])
 
@@ -51,14 +51,14 @@ m4_define([_AM_AUTOCONF_VERSION], [])
 # Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
 # This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
 AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.16.5])dnl
+[AM_AUTOMAKE_VERSION([1.17])dnl
 m4_ifndef([AC_AUTOCONF_VERSION],
   [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
 _AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
 
 # AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
 
-# Copyright (C) 2001-2021 Free Software Foundation, Inc.
+# Copyright (C) 2001-2024 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -110,7 +110,7 @@ am_aux_dir=`cd "$ac_aux_dir" && pwd`
 
 # AM_CONDITIONAL                                            -*- Autoconf -*-
 
-# Copyright (C) 1997-2021 Free Software Foundation, Inc.
+# Copyright (C) 1997-2024 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -141,7 +141,7 @@ AC_CONFIG_COMMANDS_PRE(
 Usually this means the macro was only invoked conditionally.]])
 fi])])
 
-# Copyright (C) 1999-2021 Free Software Foundation, Inc.
+# Copyright (C) 1999-2024 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -273,7 +273,7 @@ AC_CACHE_CHECK([dependency style of $depcc],
       # icc doesn't choke on unknown options, it will just issue warnings
       # or remarks (even with -Werror).  So we grep stderr for any message
       # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      # When given -MP, icc 7.0 and 7.1 complain thus:
       #   icc: Command line warning: ignoring option '-M'; no argument required
       # The diagnosis changed in icc 8.0:
       #   icc: Command line remark: option '-MP' not supported
@@ -332,7 +332,7 @@ _AM_SUBST_NOTMAKE([am__nodep])dnl
 
 # Generate code to set up dependency tracking.              -*- Autoconf -*-
 
-# Copyright (C) 1999-2021 Free Software Foundation, Inc.
+# Copyright (C) 1999-2024 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -400,7 +400,7 @@ AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
 
 # Do all the work for Automake.                             -*- Autoconf -*-
 
-# Copyright (C) 1996-2021 Free Software Foundation, Inc.
+# Copyright (C) 1996-2024 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -534,7 +534,7 @@ if test -z "$CSCOPE"; then
 fi
 AC_SUBST([CSCOPE])
 
-AC_REQUIRE([AM_SILENT_RULES])dnl
+AC_REQUIRE([_AM_SILENT_RULES])dnl
 dnl The testsuite driver may need to know about EXEEXT, so add the
 dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This
 dnl macro is hooked onto _AC_COMPILER_EXEEXT early, see below.
@@ -542,47 +542,9 @@ AC_CONFIG_COMMANDS_PRE(dnl
 [m4_provide_if([_AM_COMPILER_EXEEXT],
   [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
 
-# POSIX will say in a future version that running "rm -f" with no argument
-# is OK; and we want to be able to make that assumption in our Makefile
-# recipes.  So use an aggressive probe to check that the usage we want is
-# actually supported "in the wild" to an acceptable degree.
-# See automake bug#10828.
-# To make any issue more visible, cause the running configure to be aborted
-# by default if the 'rm' program in use doesn't match our expectations; the
-# user can still override this though.
-if rm -f && rm -fr && rm -rf; then : OK; else
-  cat >&2 <<'END'
-Oops!
-
-Your 'rm' program seems unable to run without file operands specified
-on the command line, even when the '-f' option is present.  This is contrary
-to the behaviour of most rm programs out there, and not conforming with
-the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
-
-Please tell bug-automake@gnu.org about your system, including the value
-of your $PATH and any error possibly output before this message.  This
-can help us improve future automake versions.
+AC_REQUIRE([_AM_PROG_RM_F])
+AC_REQUIRE([_AM_PROG_XARGS_N])
 
-END
-  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
-    echo 'Configuration will proceed anyway, since you have set the' >&2
-    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
-    echo >&2
-  else
-    cat >&2 <<'END'
-Aborting the configuration process, to ensure you take notice of the issue.
-
-You can download and install GNU coreutils to get an 'rm' implementation
-that behaves properly: <https://www.gnu.org/software/coreutils/>.
-
-If you want to complete the configuration process using your problematic
-'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
-to "yes", and re-run configure.
-
-END
-    AC_MSG_ERROR([Your 'rm' program is bad, sorry.])
-  fi
-fi
 dnl The trailing newline in this macro's definition is deliberate, for
 dnl backward compatibility and to allow trailing 'dnl'-style comments
 dnl after the AM_INIT_AUTOMAKE invocation. See automake bug#16841.
@@ -615,7 +577,7 @@ for _am_header in $config_headers :; do
 done
 echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
 
-# Copyright (C) 2001-2021 Free Software Foundation, Inc.
+# Copyright (C) 2001-2024 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -636,7 +598,7 @@ if test x"${install_sh+set}" != xset; then
 fi
 AC_SUBST([install_sh])])
 
-# Copyright (C) 2003-2021 Free Software Foundation, Inc.
+# Copyright (C) 2003-2024 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -658,7 +620,7 @@ AC_SUBST([am__leading_dot])])
 # Add --enable-maintainer-mode option to configure.         -*- Autoconf -*-
 # From Jim Meyering
 
-# Copyright (C) 1996-2021 Free Software Foundation, Inc.
+# Copyright (C) 1996-2024 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -693,7 +655,7 @@ AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
 
 # Check to see how 'make' treats includes.	            -*- Autoconf -*-
 
-# Copyright (C) 2001-2021 Free Software Foundation, Inc.
+# Copyright (C) 2001-2024 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -736,7 +698,7 @@ AC_SUBST([am__quote])])
 
 # Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
 
-# Copyright (C) 1997-2021 Free Software Foundation, Inc.
+# Copyright (C) 1997-2024 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -770,7 +732,7 @@ fi
 
 # Helper functions for option handling.                     -*- Autoconf -*-
 
-# Copyright (C) 2001-2021 Free Software Foundation, Inc.
+# Copyright (C) 2001-2024 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -799,7 +761,7 @@ AC_DEFUN([_AM_SET_OPTIONS],
 AC_DEFUN([_AM_IF_OPTION],
 [m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
 
-# Copyright (C) 1999-2021 Free Software Foundation, Inc.
+# Copyright (C) 1999-2024 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -846,7 +808,23 @@ AC_LANG_POP([C])])
 # For backward compatibility.
 AC_DEFUN_ONCE([AM_PROG_CC_C_O], [AC_REQUIRE([AC_PROG_CC])])
 
-# Copyright (C) 2001-2021 Free Software Foundation, Inc.
+# Copyright (C) 2022-2024 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_RM_F
+# ---------------
+# Check whether 'rm -f' without any arguments works.
+# https://bugs.gnu.org/10828
+AC_DEFUN([_AM_PROG_RM_F],
+[am__rm_f_notfound=
+AS_IF([(rm -f && rm -fr && rm -rf) 2>/dev/null], [], [am__rm_f_notfound='""'])
+AC_SUBST(am__rm_f_notfound)
+])
+
+# Copyright (C) 2001-2024 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -865,16 +843,169 @@ AC_DEFUN([AM_RUN_LOG],
 
 # Check to make sure that the build environment is sane.    -*- Autoconf -*-
 
-# Copyright (C) 1996-2021 Free Software Foundation, Inc.
+# Copyright (C) 1996-2024 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
+# _AM_SLEEP_FRACTIONAL_SECONDS
+# ----------------------------
+AC_DEFUN([_AM_SLEEP_FRACTIONAL_SECONDS], [dnl
+AC_CACHE_CHECK([whether sleep supports fractional seconds],
+               am_cv_sleep_fractional_seconds, [dnl
+AS_IF([sleep 0.001 2>/dev/null], [am_cv_sleep_fractional_seconds=yes],
+                                 [am_cv_sleep_fractional_seconds=no])
+])])
+
+# _AM_FILESYSTEM_TIMESTAMP_RESOLUTION
+# -----------------------------------
+# Determine the filesystem's resolution for file modification
+# timestamps.  The coarsest we know of is FAT, with a resolution
+# of only two seconds, even with the most recent "exFAT" extensions.
+# The finest (e.g. ext4 with large inodes, XFS, ZFS) is one
+# nanosecond, matching clock_gettime.  However, it is probably not
+# possible to delay execution of a shell script for less than one
+# millisecond, due to process creation overhead and scheduling
+# granularity, so we don't check for anything finer than that. (See below.)
+AC_DEFUN([_AM_FILESYSTEM_TIMESTAMP_RESOLUTION], [dnl
+AC_REQUIRE([_AM_SLEEP_FRACTIONAL_SECONDS])
+AC_CACHE_CHECK([filesystem timestamp resolution],
+               am_cv_filesystem_timestamp_resolution, [dnl
+# Default to the worst case.
+am_cv_filesystem_timestamp_resolution=2
+
+# Only try to go finer than 1 sec if sleep can do it.
+# Don't try 1 sec, because if 0.01 sec and 0.1 sec don't work,
+# - 1 sec is not much of a win compared to 2 sec, and
+# - it takes 2 seconds to perform the test whether 1 sec works.
+# 
+# Instead, just use the default 2s on platforms that have 1s resolution,
+# accept the extra 1s delay when using $sleep in the Automake tests, in
+# exchange for not incurring the 2s delay for running the test for all
+# packages.
+#
+am_try_resolutions=
+if test "$am_cv_sleep_fractional_seconds" = yes; then
+  # Even a millisecond often causes a bunch of false positives,
+  # so just try a hundredth of a second. The time saved between .001 and
+  # .01 is not terribly consequential.
+  am_try_resolutions="0.01 0.1 $am_try_resolutions"
+fi
+
+# In order to catch current-generation FAT out, we must *modify* files
+# that already exist; the *creation* timestamp is finer.  Use names
+# that make ls -t sort them differently when they have equal
+# timestamps than when they have distinct timestamps, keeping
+# in mind that ls -t prints the *newest* file first.
+rm -f conftest.ts?
+: > conftest.ts1
+: > conftest.ts2
+: > conftest.ts3
+
+# Make sure ls -t actually works.  Do 'set' in a subshell so we don't
+# clobber the current shell's arguments. (Outer-level square brackets
+# are removed by m4; they're present so that m4 does not expand
+# <dollar><star>; be careful, easy to get confused.)
+if (
+     set X `[ls -t conftest.ts[12]]` &&
+     {
+       test "$[]*" != "X conftest.ts1 conftest.ts2" ||
+       test "$[]*" != "X conftest.ts2 conftest.ts1";
+     }
+); then :; else
+  # If neither matched, then we have a broken ls.  This can happen
+  # if, for instance, CONFIG_SHELL is bash and it inherits a
+  # broken ls alias from the environment.  This has actually
+  # happened.  Such a system could not be considered "sane".
+  _AS_ECHO_UNQUOTED(
+    ["Bad output from ls -t: \"`[ls -t conftest.ts[12]]`\""],
+    [AS_MESSAGE_LOG_FD])
+  AC_MSG_FAILURE([ls -t produces unexpected output.
+Make sure there is not a broken ls alias in your environment.])
+fi
+
+for am_try_res in $am_try_resolutions; do
+  # Any one fine-grained sleep might happen to cross the boundary
+  # between two values of a coarser actual resolution, but if we do
+  # two fine-grained sleeps in a row, at least one of them will fall
+  # entirely within a coarse interval.
+  echo alpha > conftest.ts1
+  sleep $am_try_res
+  echo beta > conftest.ts2
+  sleep $am_try_res
+  echo gamma > conftest.ts3
+
+  # We assume that 'ls -t' will make use of high-resolution
+  # timestamps if the operating system supports them at all.
+  if (set X `ls -t conftest.ts?` &&
+      test "$[]2" = conftest.ts3 &&
+      test "$[]3" = conftest.ts2 &&
+      test "$[]4" = conftest.ts1); then
+    #
+    # Ok, ls -t worked. If we're at a resolution of 1 second, we're done,
+    # because we don't need to test make.
+    make_ok=true
+    if test $am_try_res != 1; then
+      # But if we've succeeded so far with a subsecond resolution, we
+      # have one more thing to check: make. It can happen that
+      # everything else supports the subsecond mtimes, but make doesn't;
+      # notably on macOS, which ships make 3.81 from 2006 (the last one
+      # released under GPLv2). https://bugs.gnu.org/68808
+      # 
+      # We test $MAKE if it is defined in the environment, else "make".
+      # It might get overridden later, but our hope is that in practice
+      # it does not matter: it is the system "make" which is (by far)
+      # the most likely to be broken, whereas if the user overrides it,
+      # probably they did so with a better, or at least not worse, make.
+      # https://lists.gnu.org/archive/html/automake/2024-06/msg00051.html
+      #
+      # Create a Makefile (real tab character here):
+      rm -f conftest.mk
+      echo 'conftest.ts1: conftest.ts2' >conftest.mk
+      echo '	touch conftest.ts2' >>conftest.mk
+      #
+      # Now, running
+      #   touch conftest.ts1; touch conftest.ts2; make
+      # should touch ts1 because ts2 is newer. This could happen by luck,
+      # but most often, it will fail if make's support is insufficient. So
+      # test for several consecutive successes.
+      #
+      # (We reuse conftest.ts[12] because we still want to modify existing
+      # files, not create new ones, per above.)
+      n=0
+      make=${MAKE-make}
+      until test $n -eq 3; do
+        echo one > conftest.ts1
+        sleep $am_try_res
+        echo two > conftest.ts2 # ts2 should now be newer than ts1
+        if $make -f conftest.mk | grep 'up to date' >/dev/null; then
+          make_ok=false
+          break # out of $n loop
+        fi
+        n=`expr $n + 1`
+      done
+    fi
+    #
+    if $make_ok; then
+      # Everything we know to check worked out, so call this resolution good.
+      am_cv_filesystem_timestamp_resolution=$am_try_res
+      break # out of $am_try_res loop
+    fi
+    # Otherwise, we'll go on to check the next resolution.
+  fi
+done
+rm -f conftest.ts?
+# (end _am_filesystem_timestamp_resolution)
+])])
+
 # AM_SANITY_CHECK
 # ---------------
 AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
+[AC_REQUIRE([_AM_FILESYSTEM_TIMESTAMP_RESOLUTION])
+# This check should not be cached, as it may vary across builds of
+# different projects.
+AC_MSG_CHECKING([whether build environment is sane])
 # Reject unsafe characters in $srcdir or the absolute working directory
 # name.  Accept space and tab only in the latter.
 am_lf='
@@ -893,49 +1024,40 @@ esac
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
-if (
-   am_has_slept=no
-   for am_try in 1 2; do
-     echo "timestamp, slept: $am_has_slept" > conftest.file
-     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-     if test "$[*]" = "X"; then
-	# -L didn't work.
-	set X `ls -t "$srcdir/configure" conftest.file`
-     fi
-     if test "$[*]" != "X $srcdir/configure conftest.file" \
-	&& test "$[*]" != "X conftest.file $srcdir/configure"; then
-
-	# If neither matched, then we have a broken ls.  This can happen
-	# if, for instance, CONFIG_SHELL is bash and it inherits a
-	# broken ls alias from the environment.  This has actually
-	# happened.  Such a system could not be considered "sane".
-	AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-  alias in your environment])
-     fi
-     if test "$[2]" = conftest.file || test $am_try -eq 2; then
-       break
-     fi
-     # Just in case.
-     sleep 1
-     am_has_slept=yes
-   done
-   test "$[2]" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
+am_build_env_is_sane=no
+am_has_slept=no
+rm -f conftest.file
+for am_try in 1 2; do
+  echo "timestamp, slept: $am_has_slept" > conftest.file
+  if (
+    set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+    if test "$[]*" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+    fi
+    test "$[]2" = conftest.file
+  ); then
+    am_build_env_is_sane=yes
+    break
+  fi
+  # Just in case.
+  sleep "$am_cv_filesystem_timestamp_resolution"
+  am_has_slept=yes
+done
+
+AC_MSG_RESULT([$am_build_env_is_sane])
+if test "$am_build_env_is_sane" = no; then
+  AC_MSG_ERROR([newly created file is older than distributed files!
 Check your system clock])
 fi
-AC_MSG_RESULT([yes])
+
 # If we didn't sleep, we still need to ensure time stamps of config.status and
 # generated files are strictly newer.
 am_sleep_pid=
-if grep 'slept: no' conftest.file >/dev/null 2>&1; then
-  ( sleep 1 ) &
+AS_IF([test -e conftest.file || grep 'slept: no' conftest.file >/dev/null 2>&1],, [dnl
+  ( sleep "$am_cv_filesystem_timestamp_resolution" ) &
   am_sleep_pid=$!
-fi
+])
 AC_CONFIG_COMMANDS_PRE(
   [AC_MSG_CHECKING([that generated files are newer than configure])
    if test -n "$am_sleep_pid"; then
@@ -946,18 +1068,18 @@ AC_CONFIG_COMMANDS_PRE(
 rm -f conftest.file
 ])
 
-# Copyright (C) 2009-2021 Free Software Foundation, Inc.
+# Copyright (C) 2009-2024 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
 # with or without modifications, as long as this notice is preserved.
 
-# AM_SILENT_RULES([DEFAULT])
-# --------------------------
-# Enable less verbose build rules; with the default set to DEFAULT
-# ("yes" being less verbose, "no" or empty being verbose).
-AC_DEFUN([AM_SILENT_RULES],
-[AC_ARG_ENABLE([silent-rules], [dnl
+# _AM_SILENT_RULES
+# ----------------
+# Enable less verbose build rules support.
+AC_DEFUN([_AM_SILENT_RULES],
+[AM_DEFAULT_VERBOSITY=1
+AC_ARG_ENABLE([silent-rules], [dnl
 AS_HELP_STRING(
   [--enable-silent-rules],
   [less verbose build output (undo: "make V=1")])
@@ -965,11 +1087,6 @@ AS_HELP_STRING(
   [--disable-silent-rules],
   [verbose build output (undo: "make V=0")])dnl
 ])
-case $enable_silent_rules in @%:@ (((
-  yes) AM_DEFAULT_VERBOSITY=0;;
-   no) AM_DEFAULT_VERBOSITY=1;;
-    *) AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1]);;
-esac
 dnl
 dnl A few 'make' implementations (e.g., NonStop OS and NextStep)
 dnl do not support nested variable expansions.
@@ -988,14 +1105,6 @@ am__doit:
 else
   am_cv_make_support_nested_variables=no
 fi])
-if test $am_cv_make_support_nested_variables = yes; then
-  dnl Using '$V' instead of '$(V)' breaks IRIX make.
-  AM_V='$(V)'
-  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
-else
-  AM_V=$AM_DEFAULT_VERBOSITY
-  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
-fi
 AC_SUBST([AM_V])dnl
 AM_SUBST_NOTMAKE([AM_V])dnl
 AC_SUBST([AM_DEFAULT_V])dnl
@@ -1004,9 +1113,33 @@ AC_SUBST([AM_DEFAULT_VERBOSITY])dnl
 AM_BACKSLASH='\'
 AC_SUBST([AM_BACKSLASH])dnl
 _AM_SUBST_NOTMAKE([AM_BACKSLASH])dnl
+dnl Delay evaluation of AM_DEFAULT_VERBOSITY to the end to allow multiple calls
+dnl to AM_SILENT_RULES to change the default value.
+AC_CONFIG_COMMANDS_PRE([dnl
+case $enable_silent_rules in @%:@ (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+esac
+if test $am_cv_make_support_nested_variables = yes; then
+  dnl Using '$V' instead of '$(V)' breaks IRIX make.
+  AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+])dnl
 ])
 
-# Copyright (C) 2001-2021 Free Software Foundation, Inc.
+# AM_SILENT_RULES([DEFAULT])
+# --------------------------
+# Set the default verbosity level to DEFAULT ("yes" being less verbose, "no" or
+# empty being verbose).
+AC_DEFUN([AM_SILENT_RULES],
+[AC_REQUIRE([_AM_SILENT_RULES])
+AM_DEFAULT_VERBOSITY=m4_if([$1], [yes], [0], [1])])
+
+# Copyright (C) 2001-2024 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -1034,7 +1167,7 @@ fi
 INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
 AC_SUBST([INSTALL_STRIP_PROGRAM])])
 
-# Copyright (C) 2006-2021 Free Software Foundation, Inc.
+# Copyright (C) 2006-2024 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -1053,7 +1186,7 @@ AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
 
 # Check how to create a tarball.                            -*- Autoconf -*-
 
-# Copyright (C) 2004-2021 Free Software Foundation, Inc.
+# Copyright (C) 2004-2024 Free Software Foundation, Inc.
 #
 # This file is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -1099,15 +1232,19 @@ m4_if([$1], [v7],
       am_uid=`id -u || echo unknown`
       am_gid=`id -g || echo unknown`
       AC_MSG_CHECKING([whether UID '$am_uid' is supported by ustar format])
-      if test $am_uid -le $am_max_uid; then
-         AC_MSG_RESULT([yes])
+      if test x$am_uid = xunknown; then
+        AC_MSG_WARN([ancient id detected; assuming current UID is ok, but dist-ustar might not work])
+      elif test $am_uid -le $am_max_uid; then
+        AC_MSG_RESULT([yes])
       else
-         AC_MSG_RESULT([no])
-         _am_tools=none
+        AC_MSG_RESULT([no])
+        _am_tools=none
       fi
       AC_MSG_CHECKING([whether GID '$am_gid' is supported by ustar format])
-      if test $am_gid -le $am_max_gid; then
-         AC_MSG_RESULT([yes])
+      if test x$gm_gid = xunknown; then
+        AC_MSG_WARN([ancient id detected; assuming current GID is ok, but dist-ustar might not work])
+      elif test $am_gid -le $am_max_gid; then
+        AC_MSG_RESULT([yes])
       else
         AC_MSG_RESULT([no])
         _am_tools=none
@@ -1184,6 +1321,26 @@ AC_SUBST([am__tar])
 AC_SUBST([am__untar])
 ]) # _AM_PROG_TAR
 
+# Copyright (C) 2022-2024 Free Software Foundation, Inc.
+#
+# This file is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# _AM_PROG_XARGS_N
+# ----------------
+# Check whether 'xargs -n' works.  It should work everywhere, so the fallback
+# is not optimized at all as we never expect to use it.
+AC_DEFUN([_AM_PROG_XARGS_N],
+[AC_CACHE_CHECK([xargs -n works], am_cv_xargs_n_works, [dnl
+AS_IF([test "`echo 1 2 3 | xargs -n2 echo`" = "1 2
+3"], [am_cv_xargs_n_works=yes], [am_cv_xargs_n_works=no])])
+AS_IF([test "$am_cv_xargs_n_works" = yes], [am__xargs_n='xargs -n'], [dnl
+  am__xargs_n='am__xargs_n () { shift; sed "s/ /\\n/g" | while read am__xargs_n_arg; do "$@" "$am__xargs_n_arg"; done; }'
+])dnl
+AC_SUBST(am__xargs_n)
+])
+
 m4_include([../../m4/kpse-common.m4])
 m4_include([../../m4/kpse-cxx-hack.m4])
 m4_include([../../m4/kpse-warnings.m4])
diff --git a/Build/source/libs/teckit/configure b/Build/source/libs/teckit/configure
index 5b2362c46d2..171adc7c860 100755
--- a/Build/source/libs/teckit/configure
+++ b/Build/source/libs/teckit/configure
@@ -693,6 +693,8 @@ CC
 MAINT
 MAINTAINER_MODE_FALSE
 MAINTAINER_MODE_TRUE
+am__xargs_n
+am__rm_f_notfound
 AM_BACKSLASH
 AM_DEFAULT_VERBOSITY
 AM_DEFAULT_V
@@ -2901,7 +2903,7 @@ ac_compiler_gnu=$ac_cv_c_compiler_gnu
 
 
 
-am__api_version='1.16'
+am__api_version='1.17'
 
 
 
@@ -3004,6 +3006,165 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL}'
 
 test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644'
 
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether sleep supports fractional seconds" >&5
+printf %s "checking whether sleep supports fractional seconds... " >&6; }
+if test ${am_cv_sleep_fractional_seconds+y}
+then :
+  printf %s "(cached) " >&6
+else case e in #(
+  e) if sleep 0.001 2>/dev/null
+then :
+  am_cv_sleep_fractional_seconds=yes
+else case e in #(
+  e) am_cv_sleep_fractional_seconds=no ;;
+esac
+fi
+ ;;
+esac
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_sleep_fractional_seconds" >&5
+printf "%s\n" "$am_cv_sleep_fractional_seconds" >&6; }
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking filesystem timestamp resolution" >&5
+printf %s "checking filesystem timestamp resolution... " >&6; }
+if test ${am_cv_filesystem_timestamp_resolution+y}
+then :
+  printf %s "(cached) " >&6
+else case e in #(
+  e) # Default to the worst case.
+am_cv_filesystem_timestamp_resolution=2
+
+# Only try to go finer than 1 sec if sleep can do it.
+# Don't try 1 sec, because if 0.01 sec and 0.1 sec don't work,
+# - 1 sec is not much of a win compared to 2 sec, and
+# - it takes 2 seconds to perform the test whether 1 sec works.
+#
+# Instead, just use the default 2s on platforms that have 1s resolution,
+# accept the extra 1s delay when using $sleep in the Automake tests, in
+# exchange for not incurring the 2s delay for running the test for all
+# packages.
+#
+am_try_resolutions=
+if test "$am_cv_sleep_fractional_seconds" = yes; then
+  # Even a millisecond often causes a bunch of false positives,
+  # so just try a hundredth of a second. The time saved between .001 and
+  # .01 is not terribly consequential.
+  am_try_resolutions="0.01 0.1 $am_try_resolutions"
+fi
+
+# In order to catch current-generation FAT out, we must *modify* files
+# that already exist; the *creation* timestamp is finer.  Use names
+# that make ls -t sort them differently when they have equal
+# timestamps than when they have distinct timestamps, keeping
+# in mind that ls -t prints the *newest* file first.
+rm -f conftest.ts?
+: > conftest.ts1
+: > conftest.ts2
+: > conftest.ts3
+
+# Make sure ls -t actually works.  Do 'set' in a subshell so we don't
+# clobber the current shell's arguments. (Outer-level square brackets
+# are removed by m4; they're present so that m4 does not expand
+# <dollar><star>; be careful, easy to get confused.)
+if (
+     set X `ls -t conftest.ts[12]` &&
+     {
+       test "$*" != "X conftest.ts1 conftest.ts2" ||
+       test "$*" != "X conftest.ts2 conftest.ts1";
+     }
+); then :; else
+  # If neither matched, then we have a broken ls.  This can happen
+  # if, for instance, CONFIG_SHELL is bash and it inherits a
+  # broken ls alias from the environment.  This has actually
+  # happened.  Such a system could not be considered "sane".
+  printf "%s\n" ""Bad output from ls -t: \"`ls -t conftest.ts[12]`\""" >&5
+  { { printf "%s\n" "$as_me:${as_lineno-$LINENO}: error: in '$ac_pwd':" >&5
+printf "%s\n" "$as_me: error: in '$ac_pwd':" >&2;}
+as_fn_error $? "ls -t produces unexpected output.
+Make sure there is not a broken ls alias in your environment.
+See 'config.log' for more details" "$LINENO" 5; }
+fi
+
+for am_try_res in $am_try_resolutions; do
+  # Any one fine-grained sleep might happen to cross the boundary
+  # between two values of a coarser actual resolution, but if we do
+  # two fine-grained sleeps in a row, at least one of them will fall
+  # entirely within a coarse interval.
+  echo alpha > conftest.ts1
+  sleep $am_try_res
+  echo beta > conftest.ts2
+  sleep $am_try_res
+  echo gamma > conftest.ts3
+
+  # We assume that 'ls -t' will make use of high-resolution
+  # timestamps if the operating system supports them at all.
+  if (set X `ls -t conftest.ts?` &&
+      test "$2" = conftest.ts3 &&
+      test "$3" = conftest.ts2 &&
+      test "$4" = conftest.ts1); then
+    #
+    # Ok, ls -t worked. If we're at a resolution of 1 second, we're done,
+    # because we don't need to test make.
+    make_ok=true
+    if test $am_try_res != 1; then
+      # But if we've succeeded so far with a subsecond resolution, we
+      # have one more thing to check: make. It can happen that
+      # everything else supports the subsecond mtimes, but make doesn't;
+      # notably on macOS, which ships make 3.81 from 2006 (the last one
+      # released under GPLv2). https://bugs.gnu.org/68808
+      #
+      # We test $MAKE if it is defined in the environment, else "make".
+      # It might get overridden later, but our hope is that in practice
+      # it does not matter: it is the system "make" which is (by far)
+      # the most likely to be broken, whereas if the user overrides it,
+      # probably they did so with a better, or at least not worse, make.
+      # https://lists.gnu.org/archive/html/automake/2024-06/msg00051.html
+      #
+      # Create a Makefile (real tab character here):
+      rm -f conftest.mk
+      echo 'conftest.ts1: conftest.ts2' >conftest.mk
+      echo '	touch conftest.ts2' >>conftest.mk
+      #
+      # Now, running
+      #   touch conftest.ts1; touch conftest.ts2; make
+      # should touch ts1 because ts2 is newer. This could happen by luck,
+      # but most often, it will fail if make's support is insufficient. So
+      # test for several consecutive successes.
+      #
+      # (We reuse conftest.ts[12] because we still want to modify existing
+      # files, not create new ones, per above.)
+      n=0
+      make=${MAKE-make}
+      until test $n -eq 3; do
+        echo one > conftest.ts1
+        sleep $am_try_res
+        echo two > conftest.ts2 # ts2 should now be newer than ts1
+        if $make -f conftest.mk | grep 'up to date' >/dev/null; then
+          make_ok=false
+          break # out of $n loop
+        fi
+        n=`expr $n + 1`
+      done
+    fi
+    #
+    if $make_ok; then
+      # Everything we know to check worked out, so call this resolution good.
+      am_cv_filesystem_timestamp_resolution=$am_try_res
+      break # out of $am_try_res loop
+    fi
+    # Otherwise, we'll go on to check the next resolution.
+  fi
+done
+rm -f conftest.ts?
+# (end _am_filesystem_timestamp_resolution)
+ ;;
+esac
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_filesystem_timestamp_resolution" >&5
+printf "%s\n" "$am_cv_filesystem_timestamp_resolution" >&6; }
+
+# This check should not be cached, as it may vary across builds of
+# different projects.
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether build environment is sane" >&5
 printf %s "checking whether build environment is sane... " >&6; }
 # Reject unsafe characters in $srcdir or the absolute working directory
@@ -3024,49 +3185,45 @@ esac
 # symlink; some systems play weird games with the mod time of symlinks
 # (eg FreeBSD returns the mod time of the symlink's containing
 # directory).
-if (
-   am_has_slept=no
-   for am_try in 1 2; do
-     echo "timestamp, slept: $am_has_slept" > conftest.file
-     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-     if test "$*" = "X"; then
-	# -L didn't work.
-	set X `ls -t "$srcdir/configure" conftest.file`
-     fi
-     if test "$*" != "X $srcdir/configure conftest.file" \
-	&& test "$*" != "X conftest.file $srcdir/configure"; then
-
-	# If neither matched, then we have a broken ls.  This can happen
-	# if, for instance, CONFIG_SHELL is bash and it inherits a
-	# broken ls alias from the environment.  This has actually
-	# happened.  Such a system could not be considered "sane".
-	as_fn_error $? "ls -t appears to fail.  Make sure there is not a broken
-  alias in your environment" "$LINENO" 5
-     fi
-     if test "$2" = conftest.file || test $am_try -eq 2; then
-       break
-     fi
-     # Just in case.
-     sleep 1
-     am_has_slept=yes
-   done
-   test "$2" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   as_fn_error $? "newly created file is older than distributed files!
+am_build_env_is_sane=no
+am_has_slept=no
+rm -f conftest.file
+for am_try in 1 2; do
+  echo "timestamp, slept: $am_has_slept" > conftest.file
+  if (
+    set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
+    if test "$*" = "X"; then
+      # -L didn't work.
+      set X `ls -t "$srcdir/configure" conftest.file`
+    fi
+    test "$2" = conftest.file
+  ); then
+    am_build_env_is_sane=yes
+    break
+  fi
+  # Just in case.
+  sleep "$am_cv_filesystem_timestamp_resolution"
+  am_has_slept=yes
+done
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_build_env_is_sane" >&5
+printf "%s\n" "$am_build_env_is_sane" >&6; }
+if test "$am_build_env_is_sane" = no; then
+  as_fn_error $? "newly created file is older than distributed files!
 Check your system clock" "$LINENO" 5
 fi
-{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: yes" >&5
-printf "%s\n" "yes" >&6; }
+
 # If we didn't sleep, we still need to ensure time stamps of config.status and
 # generated files are strictly newer.
 am_sleep_pid=
-if grep 'slept: no' conftest.file >/dev/null 2>&1; then
-  ( sleep 1 ) &
+if test -e conftest.file || grep 'slept: no' conftest.file >/dev/null 2>&1
+then :
+
+else case e in #(
+  e)   ( sleep "$am_cv_filesystem_timestamp_resolution" ) &
   am_sleep_pid=$!
+ ;;
+esac
 fi
 
 rm -f conftest.file
@@ -3356,17 +3513,13 @@ else
 fi
 rmdir .tst 2>/dev/null
 
+AM_DEFAULT_VERBOSITY=1
 # Check whether --enable-silent-rules was given.
 if test ${enable_silent_rules+y}
 then :
   enableval=$enable_silent_rules;
 fi
 
-case $enable_silent_rules in # (((
-  yes) AM_DEFAULT_VERBOSITY=0;;
-   no) AM_DEFAULT_VERBOSITY=1;;
-    *) AM_DEFAULT_VERBOSITY=1;;
-esac
 am_make=${MAKE-make}
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking whether $am_make supports nested variables" >&5
 printf %s "checking whether $am_make supports nested variables... " >&6; }
@@ -3389,15 +3542,45 @@ esac
 fi
 { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_make_support_nested_variables" >&5
 printf "%s\n" "$am_cv_make_support_nested_variables" >&6; }
-if test $am_cv_make_support_nested_variables = yes; then
-    AM_V='$(V)'
-  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
-else
-  AM_V=$AM_DEFAULT_VERBOSITY
-  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
-fi
 AM_BACKSLASH='\'
 
+am__rm_f_notfound=
+if (rm -f && rm -fr && rm -rf) 2>/dev/null
+then :
+
+else case e in #(
+  e) am__rm_f_notfound='""' ;;
+esac
+fi
+
+
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: checking xargs -n works" >&5
+printf %s "checking xargs -n works... " >&6; }
+if test ${am_cv_xargs_n_works+y}
+then :
+  printf %s "(cached) " >&6
+else case e in #(
+  e) if test "`echo 1 2 3 | xargs -n2 echo`" = "1 2
+3"
+then :
+  am_cv_xargs_n_works=yes
+else case e in #(
+  e) am_cv_xargs_n_works=no ;;
+esac
+fi ;;
+esac
+fi
+{ printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: $am_cv_xargs_n_works" >&5
+printf "%s\n" "$am_cv_xargs_n_works" >&6; }
+if test "$am_cv_xargs_n_works" = yes
+then :
+  am__xargs_n='xargs -n'
+else case e in #(
+  e)   am__xargs_n='am__xargs_n () { shift; sed "s/ /\\n/g" | while read am__xargs_n_arg; do "" "$am__xargs_n_arg"; done; }'
+ ;;
+esac
+fi
+
 
 
 
@@ -4644,7 +4827,7 @@ else case e in #(
       # icc doesn't choke on unknown options, it will just issue warnings
       # or remarks (even with -Werror).  So we grep stderr for any message
       # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      # When given -MP, icc 7.0 and 7.1 complain thus:
       #   icc: Command line warning: ignoring option '-M'; no argument required
       # The diagnosis changed in icc 8.0:
       #   icc: Command line remark: option '-MP' not supported
@@ -4962,47 +5145,9 @@ fi
 
 
 
-# POSIX will say in a future version that running "rm -f" with no argument
-# is OK; and we want to be able to make that assumption in our Makefile
-# recipes.  So use an aggressive probe to check that the usage we want is
-# actually supported "in the wild" to an acceptable degree.
-# See automake bug#10828.
-# To make any issue more visible, cause the running configure to be aborted
-# by default if the 'rm' program in use doesn't match our expectations; the
-# user can still override this though.
-if rm -f && rm -fr && rm -rf; then : OK; else
-  cat >&2 <<'END'
-Oops!
 
-Your 'rm' program seems unable to run without file operands specified
-on the command line, even when the '-f' option is present.  This is contrary
-to the behaviour of most rm programs out there, and not conforming with
-the upcoming POSIX standard: <http://austingroupbugs.net/view.php?id=542>
 
-Please tell bug-automake@gnu.org about your system, including the value
-of your $PATH and any error possibly output before this message.  This
-can help us improve future automake versions.
 
-END
-  if test x"$ACCEPT_INFERIOR_RM_PROGRAM" = x"yes"; then
-    echo 'Configuration will proceed anyway, since you have set the' >&2
-    echo 'ACCEPT_INFERIOR_RM_PROGRAM variable to "yes"' >&2
-    echo >&2
-  else
-    cat >&2 <<'END'
-Aborting the configuration process, to ensure you take notice of the issue.
-
-You can download and install GNU coreutils to get an 'rm' implementation
-that behaves properly: <https://www.gnu.org/software/coreutils/>.
-
-If you want to complete the configuration process using your problematic
-'rm' anyway, export the environment variable ACCEPT_INFERIOR_RM_PROGRAM
-to "yes", and re-run configure.
-
-END
-    as_fn_error $? "Your 'rm' program is bad, sorry." "$LINENO" 5
-  fi
-fi
 
 
 # am_maintainer_mode
@@ -5616,7 +5761,7 @@ else case e in #(
       # icc doesn't choke on unknown options, it will just issue warnings
       # or remarks (even with -Werror).  So we grep stderr for any message
       # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      # When given -MP, icc 7.0 and 7.1 complain thus:
       #   icc: Command line warning: ignoring option '-M'; no argument required
       # The diagnosis changed in icc 8.0:
       #   icc: Command line remark: option '-MP' not supported
@@ -6609,7 +6754,7 @@ else case e in #(
       # icc doesn't choke on unknown options, it will just issue warnings
       # or remarks (even with -Werror).  So we grep stderr for any message
       # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
+      # When given -MP, icc 7.0 and 7.1 complain thus:
       #   icc: Command line warning: ignoring option '-M'; no argument required
       # The diagnosis changed in icc 8.0:
       #   icc: Command line remark: option '-MP' not supported
@@ -7626,6 +7771,18 @@ printf %s "checking that generated files are newer than configure... " >&6; }
    fi
    { printf "%s\n" "$as_me:${as_lineno-$LINENO}: result: done" >&5
 printf "%s\n" "done" >&6; }
+case $enable_silent_rules in # (((
+  yes) AM_DEFAULT_VERBOSITY=0;;
+   no) AM_DEFAULT_VERBOSITY=1;;
+esac
+if test $am_cv_make_support_nested_variables = yes; then
+    AM_V='$(V)'
+  AM_DEFAULT_V='$(AM_DEFAULT_VERBOSITY)'
+else
+  AM_V=$AM_DEFAULT_VERBOSITY
+  AM_DEFAULT_V=$AM_DEFAULT_VERBOSITY
+fi
+
  if test -n "$EXEEXT"; then
   am__EXEEXT_TRUE=
   am__EXEEXT_FALSE='#'
diff --git a/Build/source/libs/teckit/include/teckit/Makefile.in b/Build/source/libs/teckit/include/teckit/Makefile.in
index 0a133d70cac..a347d28e0d5 100644
--- a/Build/source/libs/teckit/include/teckit/Makefile.in
+++ b/Build/source/libs/teckit/include/teckit/Makefile.in
@@ -1,7 +1,7 @@
-# Makefile.in generated by automake 1.16.5 from Makefile.am.
+# Makefile.in generated by automake 1.17 from Makefile.am.
 # @configure_input@
 
-# Copyright (C) 1994-2021 Free Software Foundation, Inc.
+# Copyright (C) 1994-2024 Free Software Foundation, Inc.
 
 # This Makefile.in is free software; the Free Software Foundation
 # gives unlimited permission to copy and/or distribute it,
@@ -69,6 +69,8 @@ am__make_running_with_option = \
   test $$has_opt = yes
 am__make_dryrun = (target_option=n; $(am__make_running_with_option))
 am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
+am__rm_f = rm -f $(am__rm_f_notfound)
+am__rm_rf = rm -rf $(am__rm_f_notfound)
 pkgdatadir = $(datadir)/@PACKAGE@
 pkgincludedir = $(includedir)/@PACKAGE@
 pkglibdir = $(libdir)/@PACKAGE@
@@ -193,8 +195,10 @@ ac_ct_CXX = @ac_ct_CXX@
 am__include = @am__include@
 am__leading_dot = @am__leading_dot@
 am__quote = @am__quote@
+am__rm_f_notfound = @am__rm_f_notfound@
 am__tar = @am__tar@
 am__untar = @am__untar@
+am__xargs_n = @am__xargs_n@
 bindir = @bindir@
 build = @build@
 build_alias = @build_alias@
@@ -342,8 +346,8 @@ mostlyclean-generic:
 clean-generic:
 
 distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+	-$(am__rm_f) $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || $(am__rm_f) $(CONFIG_CLEAN_VPATH_FILES)
 
 maintainer-clean-generic:
 	@echo "This command is intended for maintainers to use"
@@ -447,3 +451,10 @@ distclean-local:
 # Tell versions [3.59,3.63) of GNU make to not export all variables.
 # Otherwise a system limit (for SysV at least) may be exceeded.
 .NOEXPORT:
+
+# Tell GNU make to disable its built-in pattern rules.
+%:: %,v
+%:: RCS/%,v
+%:: RCS/%
+%:: s.%
+%:: SCCS/s.%