trunk/Master/texmf-dist/source/latex/vrsion

git-svn-id: svn://tug.org/texlive/trunk@584 c570f23f-e606-0410-a88d-b1316a301751

3 files changed, 804 insertions, 0 deletions

diff --git a/Master/texmf-dist/source/latex/vrsion/00readme.vrs b/Master/texmf-dist/source/latex/vrsion/00readme.vrs
new file mode 100644
index 00000000000..2757c47afab
--- /dev/null
+++ b/Master/texmf-dist/source/latex/vrsion/00readme.vrs
@@ -0,0 +1,28 @@
+
+This is the file `00readme.vrs', which accompanies the `vrsion' 
+package distribution.  This package was previously called 
+`version', but was renamed to minimize the confusion with 
+the LaTeX 2.09 package `version' by Stephen Bellatoni.  My 
+apologizes for the trouble this may cause the users. 
+
+The package defines a command which produces 
+a version number in the .dvi-file when LaTeX is run.  To use the 
+package, run LaTeX on `vrsion.ins', this produces the file 
+`vrsion.sty' which contains the macro definitions.  To obtain the 
+userguide and documentation, run LaTeX on `vrsion.dtx'.
+
+The 'vrsion' package consists of two files:
+    vrsion.ins   -  the installation driver
+    vrsion.dtx   -  the macro code and instructions on how to use 
+                    the package in `docstrip'-able format.
+Anyone is free to re-distribute these files provided the restrictions
+mentioned in 'vrsion.ins' are obeyed.  These are mainly that the 
+two files always must be distributed together and that noone is 
+allowed to distribute the files for profit.  
+
+Inquiries can be sent to:  <matsd@homenet.se>.
+This file last modified on 1997/02/22.
+
+____________________________________________________________________
+Copyright (c) 1997 by Mats Dahlgren.
+
diff --git a/Master/texmf-dist/source/latex/vrsion/vrsion.dtx b/Master/texmf-dist/source/latex/vrsion/vrsion.dtx
new file mode 100644
index 00000000000..91f5ed1889d
--- /dev/null
+++ b/Master/texmf-dist/source/latex/vrsion/vrsion.dtx
@@ -0,0 +1,726 @@
+%   
+%  \iffalse  
+% 
+%    The first part is a comment to the reader(s) of `vrsion.dtx'.
+%
+%  vrsion.dtx    version 1.41, February 22, 1997 
+%  (c) 1994-1997 by Mats Dahlgren  (matsd@homenet.se)
+%
+%  Please see the information in file `vrsion.ins' on how you 
+%  may use and (re-)distribute this file.  Run LaTeX on the file 
+%  `vrsion.ins' to get a .sty-file and on vrsion.dtx to obtain the 
+%  instructions.
+%
+%  This file may NOT be distributed if not accompanied by 'vrsion.ins'.
+%
+%<*driver>
+\documentclass[a4paper]{ltxdoc}
+\textwidth=150mm
+\textheight=210mm
+\topmargin=0mm
+\oddsidemargin=5mm
+\evensidemargin=5mm
+\RecordChanges
+%\begin{document}
+  \DocInput{vrsion.dtx} 
+%  \PrintChanges
+\end{document}
+%</driver>
+%  \fi
+%
+%  \CheckSum{804}
+%  
+%  \def\filename{vrsion.dtx}
+%  \def\fileversion{1.41}
+%  \def\filedate{1997/02/22}\def\docdate{\filedate}
+%  \date{\docdate}
+%  \changes{1.0}{1994/12/28}{First version of `version' package.}
+%  \changes{1.1}{1995/05/15}{Fixed extra spaces and warning in 
+%  the documentation that \texttt{\textbackslash version} is a fragile 
+%  command.  Also changed the name of the package.}
+%  \changes{1.2}{1995/05/31}{Fixed \textsf{babel} 
+%  incompatibility and made \texttt{\textbackslash version} robust.}
+%  \changes{1.3}{1996/02/08}{Cosmetics in the installation 
+%  routine, adjustments to changes in \textsf{babel}, making use 
+%  of \textsf{xspace} if loaded, and a working solution to 
+%  problems with \texttt{\textbackslash maketitle} command.}
+%  \changes{1.4}{1996/06/25}{Fixed incompatibility with the 
+%  \textsf{koma-script} package.}
+%  \changes{1.41}{1997/02/22}{Upgraded documentation.}
+%  \MakeShortVerb{\|}
+%  \title{\textsf{vrsion}\\ -- a \LaTeX{} Macro for version Numbering of 
+%  Files\thanks{This document describes \textsf{vrsion} version 
+%  \fileversion , and was last revised on \docdate.}}
+%  \author{Mats Dahlgren\\ (\texttt{matsd@homenet.se})}
+%  \begin{document}
+%  \maketitle  
+%  \begin{abstract}
+%  The \textsf{vrsion} package provides a user-friendly way to
+%  introduce file version numbers in \LaTeX{} documents. 
+%  It remembers the previous version number, also when
+%  the |.aux|-file is corrupted (due to errors in the
+%  \LaTeX{} run).\\ \small This file and the package:\
+%  Copyright \copyright\ 1994-97 by Mats Dahlgren.  All rights
+%  reserved. 
+%  \end{abstract}
+%    
+%  \section{Introduction}
+%  \DescribeMacro\version
+%  This package provides one command, |\version|, which
+%  puts a version number where it appears.  The version
+%  number is increased each time \LaTeX{} is run,
+%  \textit{i.e.}\ it numbers the |.dvi|-file.  If the
+%  package is loaded but the command |\version| is not
+%  issued, the present version number is preserved. 
+%  Numbering can be incremented at three different levels: 
+%  units, tenths, and hundreds.  A change between two of these 
+%  is obtained by changing the package option.  After a change
+%  of steplength, the previous version number is
+%  incremented with the new steplength.  The version number
+%  can be held constant by using the command
+%  \DescribeMacro\keepversion
+%  |\keepversion|; this enables the version number to be
+%  printed without being increased.  (|\keepversion| can be
+%  \DescribeMacro\stepversion
+%  overridden by the command |\stepversion|.) 
+%  
+%  \section{Userguide}
+%  \subsection{Requirements}     
+%  The file |vrsion.sty| must be available in the user's
+%  |TEXINPUTS| directories. It requires \LaTeXe{} of
+%  1995/12/01 (or newer). 
+%  
+%  \subsection{Usage}
+%  The package is included by stating \\
+%  |  \usepackage[|\textit{option}|]{vrsion}|\\
+%  \DescribeMacro{one} \DescribeMacro{ten}
+%  \DescribeMacro{hundred} \DescribeMacro{xspace}
+%  in the document preamble.  It can take one of the 
+%  options |one|, |ten|, and |hundred|, and in addition |xspace|. 
+%  To produce a 
+%  version number anywhere in your document you issue the 
+%  \DescribeMacro\version
+%  command |\version| at the desired place in your \LaTeX{}
+%  input file.\footnote{Notice that the text ``version''
+%  is \textit{not} produced by the
+%  \texttt{\textbackslash version} command.}  The 
+%  version number will then be incremented  each time you
+%  run \LaTeX{} on the file.  The command |\version| is 
+%  robust.\footnote{Thanks to Timothy Robertson 
+%  (\texttt{timothyr@cmbr.phys.cmu.edu}) for bringing my 
+%  attention to the problem of \texttt{\textbackslash version} 
+%  being fragile.}  Depending on the  option
+%  used, the version number will be an integer (no  option
+%  or option |one|), a number with one decimal  (option
+%  |ten|), or a two-decimal number (option  |hundred|). 
+%  If the option |xspace| is specified, the \textsf{xspace} 
+%  package is loaded and its features are benefited from.  (If 
+%  the \textsf{xspace} package is loaded by a separate 
+%  |\usepackage| statement or by another package, its features 
+%  are used by \textsf{vrsion}.)  
+%  
+%  When changing from one option (of |one|, |ten|, or |hundred|) 
+%  to another,  the previous
+%  format of the version number will be  changed according
+%  to the new option.  If a smaller  increment is
+%  specified, the next increment will simply  append one
+%  digit |1| to the old version number; \textit{e.g.}\  a
+%  change from option |ten| to |hundred| after version  3.2
+%  will result in version 3.21.  If a larger  increment is
+%  specified, the old version number will be truncated
+%  before the increment; \textit{e.g.}\  a change from     
+%  option |hundred| to |ten| after version 3.25
+%  will  result in version 3.3.  You should (normally) not
+%  use the  command |\version| more once in a document. 
+%  The version number is stored in a file with  extension
+%  `|vrs|' in the default directory.  (The  full name of this
+%  file is |\jobname.vrs|.) 
+%  
+%  If you want your document to contain a version 
+%  number without having it incremented each time
+%  you run \LaTeX{}, you should issue the command 
+%  \DescribeMacro\keepversion
+%  |\keepversion| in the document (preamble).  This 
+%  switches off the incrementation mechanism and prevents
+%  the package from writing an updated |.vrs|-file.  
+%  The |\keepversion| command can be cancelled at 
+%  any later place in the document by issuing the 
+%  \DescribeMacro\stepversion
+%  command |\stepversion|.  The action taken by the 
+%  |\version| command is determined by which of these
+%  two was last issued.
+%  
+%  Typically, you would load the \textsf{vrsion} package 
+%  with the desired option and use the command 
+%  |\version| where you want your document to state 
+%  its version number.  Normally, you would have the
+%  |\keepversion| command in the preamble, but 
+%  comment it out on the first \LaTeX{} run when you 
+%  prepare to print a new version and then have the 
+%  |\keepversion| in action during the \LaTeX{} runs 
+%  needed to resolve the references.
+%  
+%  When it is desired to repeat the version number
+%  several times in a document, issue a 
+%  |\keepversion| directly after the first use of 
+%  |\version|.  This will then produce the same 
+%  version number at all occurrences; and the version
+%  number will be incremented according to the use of 
+%  |\keepversion| in the preamble.  
+%  
+%  If the increase of the version number is to occur 
+%  at any stage later than the fist occurrence of 
+%  |\version|, the occurrence of |\version| 
+%  which is to increase the version number should be
+%  preceeded by a |\stepversion| command (and 
+%  followed by |\keepversion| to prevent further
+%  increments).  The author can not think of any 
+%  reason why this should be desired, but it can be 
+%  achieved anyway$\ldots$
+%  
+%  \subsection{Known Problems}
+%  \begin{itemize}
+%  \item At the present (\filedate), \textsf{vrsion} does not 
+%  work properly with neither the \textsf{letter} nor the 
+%  \textsf{scrlettr} document classes.  
+%  \item The |\vrsion| package is not working properly with the
+%  |\include{|\textit{file}|}| command; use |\input{|\textit{file}|}| 
+%  instead.
+%  \item If the command |\version| is issued more than once
+%  in a document,   the version number will be incremented
+%  at each occurrence and produce   different version
+%  numbers at the different occurrences (unless  
+%  |\keepversion| is in effect).  This may typically be a 
+%  problem if you use |\version| in the page header or footer. 
+%  This is avoided if |\keepversion| is issued somewhere on the 
+%  second page.
+%  \end{itemize} 
+%  
+%  \section{History}
+%  The first version of the package was released in late 
+%  December of 1994.  The package
+%  was created with useful help and ideas from Johan
+%  Fr\"oberg (\texttt{emgion@physchem.kth.se}). \par
+%  The \textsf{vrsion} package version \fileversion{} has 
+%  been tested with \LaTeXe{} of 
+%  1996/06/01 running   
+%  \TeX{} 3.14159 under OpenVMS. Please send bug reports
+%  (see below), corrections, additions, suggestions,
+%  \textit{etc.}\ to me at \texttt{matsd@physchem.kth.se}. 
+%  
+%  \subsection{Changes from previous versions}
+%  
+%  In \textsf{vrsion} (|version|) version 1.0 the macro 
+%  |\@skrivner| caused extra 
+%  space to be inserted in front of the version number.  With 
+%  \textsf{vrsion} version 1.1 and later this is avoided.  
+%  
+%  In version 1.1 the \textsf{vrsion} package had incompatibility 
+%  problems with the \textsf{babel} package.\footnote{Thanks to Peter 
+%  Ryder (\texttt{ryder@theo.physik.uni-bremen.de}) for 
+%  bringing my attention to this problem.}  With \textsf{vrsion} 
+%  version 1.2 this problem is eliminated.  Also, the command 
+%  |\version| has been made robust.  
+%  
+%  In version 1.3, some adjustments to changes in the \textsf{babel} 
+%  package have been made,\footnote{Thanks to Cornelius C.\ Noack 
+%  (\texttt{noack@physik.uni-bremen.de}) for bringing my attention to 
+%  the re-appearance of the \textsf{babel} incompatibility.}   
+%  if the \textsf{xspace} package is 
+%  loaded, its features are made use of.  Also, some problems with 
+%  |\maketitle| issuing extra blank page(s) have been 
+%  eliminated,\footnote{Thanks to Ludek Matyska (\texttt{ludek@muni.cz})
+%  for pointing out this problem.}   it 
+%  seems (at least for the \textsf{article}, \textsf{report}, and 
+%  \textsf{book} classes).  Furthermore, some cosmetics 
+%  in the installation routine have been added.
+%  
+%  Version 1.4 eliminated an incompatibility with 
+%  the \textsf{koma-script} package. The incompatibility was that 
+%  some features of \textsf{koma-script}'s version of the 
+%  |\maketitle| command were lost when \textsf{vrsion} was 
+%  loaded.\footnote{Thanks to Christofer P.\ Baron 
+%  (\texttt{baron@iml.fgh.de}) for bringing my attention to this 
+%  problem.}  Furthermore, some |\typeout| statements have been 
+%  removed and the processing order of some of the macro 
+%  definitions has been changed.  
+%  
+%  \section{Sending a Bug Report}
+%  \textsf{vrsion} is most likely to contain bugs.
+%  Reports of bugs in the package are most welcome.  
+%  When filing a bug report,
+%  please take the following actions:
+%  \begin{enumerate}
+%  \item Ensure your problem is not due to your inputfile;
+%  \item Ensure your problem is not due to 
+%     your own package(s) or class(es);
+%  \item Ensure your problem is not covered in the section 
+%     ''Known Problems'' above;
+%  \item  Try to locate the problem by writing a minimal 
+%     \LaTeX{} input file which reproduces the problem.  
+%     Include the command\\ 
+%     |  \setcounter{errorcontextlines}{999}|\\ 
+%     in your input;
+%  \item Run your file through \LaTeX ;
+%  \item Send a description of your problem, the input file 
+%     and the log file via e-mail to:\\  \hspace*{5mm}
+%     \texttt{matsd@homenet.se}.
+%  \end{enumerate}
+%  \bigskip
+%  
+%  {\itshape Enjoy your \LaTeX!\raisebox{-\baselineskip}{mats d.}}
+%  \StopEventually{\par\vfill\hfill{\scriptsize Copyright
+%    \copyright{} 1996-97 by Mats Dahlgren.}}
+%  \newpage
+%  
+%  \section{The Code} 
+%  For the interested reader(s), here is a short description 
+%  of the code.
+%
+%  First, the package should identify itself:
+% \iffalse
+%<*paketkod>
+% \fi
+%    \begin{macrocode}
+\NeedsTeXFormat{LaTeX2e}[1995/12/01]
+\ProvidesPackage{vrsion}%
+  [1997/02/22 version numbering of LaTeX files (v.1.41).]
+%    \end{macrocode}
+%  \par Some counters and booleans used 
+%  are to be defined first.  Also the user commands 
+%  |\keepversion| and |\stepversion|, which only (re-)set 
+%  the |Keepversion| boolean, are defined.
+%    \begin{macrocode}
+\newcounter{versionnr}
+\newcounter{versionnrten}[versionnr]
+\newcounter{versionnrhundred}[versionnrten]
+\@addtoreset{versionnrhundred}{versionnr}
+\newif\ifKeepversion \Keepversionfalse
+\newif\ifxspc \xspcfalse
+\newcommand{\keepversion}{\global\Keepversiontrue}
+\newcommand{\stepversion}{\global\Keepversionfalse}
+%    \end{macrocode}
+%  \par Next, the options are declared.  The declaration of
+%  option |one| is the default version of the |\version| 
+%  macro.  If the boolean 
+%  |Keepversion| (set by the command |\keepversion|) is 
+%  true, no increase of the version number is preformed, 
+%  nor is anything written to the |.vrs|-file.  The command 
+%  |\@skrivner| is responsible for writing the |.vrs|-file  
+%  (``skriv ner'' is Swedish for ``write down'').
+%    \begin{macrocode}
+\DeclareOption{one}{%
+\DeclareRobustCommand{\version}{%
+  \ifKeepversion \else 
+    \stepcounter{versionnr}% 
+    \@skrivner
+  \fi
+  \theversionnr%
+  \@ifundefined{xspace}{}{\xspace}%
+}
+}
+%    \end{macrocode}
+%  The |ten| option modifies the |\version| command to 
+%  produce a decimal number and steps the integer version 
+%  number if the decimal part reaches 10.  
+%    \begin{macrocode}
+\DeclareOption{ten}{%
+  \DeclareRobustCommand{\version}{%
+    \ifKeepversion \else
+      \stepcounter{versionnrten}%
+      \ifnum\theversionnrten=10\stepcounter{versionnr} \fi
+      \@skrivner
+    \fi
+    \theversionnr .\theversionnrten%
+    \@ifundefined{xspace}{}{\xspace}%
+  }
+}
+%    \end{macrocode}
+%  The option |hundred| does the same as |ten|, but with 
+%  a two-decimal number.
+%    \begin{macrocode}
+\DeclareOption{hundred}{%
+  \DeclareRobustCommand{\version}{%
+    \ifKeepversion \else 
+      \stepcounter{versionnrhundred}%
+      \ifnum\theversionnrhundred=10\stepcounter{versionnrten} \fi
+      \ifnum\theversionnrten=10\stepcounter{versionnr} \fi
+      \@skrivner
+    \fi
+    \theversionnr .\theversionnrten\theversionnrhundred%
+    \@ifundefined{xspace}{}{\xspace}%
+  }
+}
+%    \end{macrocode}
+%  The |xspace| option, which only forces the \textsf{xspace} package 
+%  to be loaded, is quite short in the code:
+%    \begin{macrocode}
+\DeclareOption{xspace}{\global\xspctrue}
+%    \end{macrocode}
+%  All other options which may be specified are to be 
+%  ignored:
+%    \begin{macrocode}
+\DeclareOption*{\OptionNotUsed}
+%    \end{macrocode}
+%  \par Now we can process the options, and -- if requested --  load 
+%  the \textsf{xspace} package.
+%    \begin{macrocode}
+\ExecuteOptions{one}
+\ProcessOptions
+\ifxspc\RequirePackage{xspace}\fi
+%    \end{macrocode}
+%  \par Now the task is to define the internals.  The macro 
+%  |\vrsFile| simply holds the name of the |.vrs|-file to 
+%  use.  The macro |\@skrivner| writes the version number 
+%  counters to a file
+%  in a format which is easy to deal with in 
+%  \LaTeX{}, a name-wise change\footnote{This was nessecary 
+%  to make \texttt{vrsion} compatible with \textsf{babel}.} 
+%  of the the ordinary |\label| format.  The internal 
+%  macro |\@vrs| is used to avoid problems with label 
+%  change warnings and to avoid trouble with missing 
+%  version number information in the |.aux|-file when 
+%  |\keepversion| is used.  As an aid, the dummy-counter 
+%  |VrsNr| is used.
+%    \begin{macrocode}
+\def\vrsFile{\jobname.vrs}
+\newwrite\@vrs
+\newcounter{VrsNr}
+\def\@skrivner{%
+  \setcounter{VrsNr}{\@partaux}%
+  \addtocounter{VrsNr}{1}%
+  \let\@vrs=\theVrsNr%
+  \immediate\openout\@vrs\vrsFile%
+  \immediate\write\@vrs{\relax}%
+  \immediate\write\@vrs{%
+    \string\vrslabel{versionsnummer}{{\theversionnr}{\thepage}}}%
+  \immediate\write\@vrs{%
+    \string\vrslabel{versionsnummertio}{{\theversionnrten}{\thepage}}}%
+  \immediate\write\@vrs{%
+    \string\vrslabel{versionsnummerhundra}{{\theversionnrhundred}{\thepage}}
+}%
+  \immediate\closeout\@vrs{}%
+}
+%    \end{macrocode}
+%  \par\textsf{babel} compatibility 
+%  is obtained by defining special |\label| and |\ref| commands.
+%    \begin{macrocode}
+\@ifundefined{bbl@ref}{\let\vrsref=\ref}{\let\vrsref=\bbl@ref}
+\@ifundefined{bbl@newlabel}{\let\vrslabel=\newlabel}%
+{\let\vrslabel=\bbl@newlabel}
+%    \end{macrocode}
+%  \par If it exists, the file |\jobname.vrs| should 
+%  be read, and the counters set accordingly.  If this file
+%  is missing, the counters should be zero.
+%    \begin{macrocode}
+\IfFileExists{\vrsFile}{\@@input\vrsFile%
+    \setcounter{versionnr}{\vrsref{versionsnummer}}%
+    \setcounter{versionnrten}{\vrsref{versionsnummertio}}%
+    \setcounter{versionnrhundred}{\vrsref{versionsnummerhundra}}%
+  }{%
+    \typeout{No file \vrsFile.}%
+    \setcounter{versionnr}{\z@}%
+    \setcounter{versionnrten}{\z@}%
+    \setcounter{versionnrhundred}{\z@}%
+}
+%    \end{macrocode}
+%  \par To prevent |\maketitle| from creating extra blank pages, 
+%  some commands from the \LaTeXe{} kernel have to be slightly 
+%  modified.  To make sure we use the desired definitions, the 
+%  changes are issued in an |\AtBeginDocument| command.  (The 
+%  changes are that a few |\newpage| commands have been removed and 
+%  that a |\cleardoublepage| has been removed for the \textsf{book} 
+%  class.)  To cope with the incompatibility of the 
+%  \textsf{koma-script} package, different modified definitions are 
+%  used.  Which is to be used is tested in an |\@ifundefined| 
+%  statement.
+%    \begin{macrocode}
+\AtBeginDocument{%
+\@ifundefined{subject}{%
+\if@titlepage
+  \renewcommand\maketitle{\begin{titlepage}%
+  \let\footnotesize\small
+  \let\footnoterule\relax
+  \let \footnote \thanks
+  \null\vfil
+  \vskip 60\p@
+  \begin{center}%
+    {\LARGE \@title \par}%
+    \vskip 3em%
+    {\large
+     \lineskip .75em%
+      \begin{tabular}[t]{c}%
+        \@author
+      \end{tabular}\par}%
+      \vskip 1.5em%
+    {\large \@date \par}%       
+  \end{center}\par
+  \@thanks
+  \vfil\null
+  \end{titlepage}%
+  \setcounter{footnote}{0}%
+  \global\let\thanks\relax
+  \global\let\maketitle\relax
+  \global\let\@thanks\@empty
+  \global\let\@author\@empty
+  \global\let\@date\@empty
+  \global\let\@title\@empty
+  \global\let\title\relax
+  \global\let\author\relax
+  \global\let\date\relax
+  \global\let\and\relax
+}
+\else
+\renewcommand\maketitle{\par
+  \begingroup
+    \renewcommand\thefootnote{\@fnsymbol\c@footnote}%
+    \def\@makefnmark{\rlap{\@textsuperscript{\normalfont\@thefnmark}}}%
+    \long\def\@makefntext##1{\parindent 1em\noindent
+            \hb@xt@1.8em{%
+                \hss\@textsuperscript{\normalfont\@thefnmark}}##1}%
+    \if@twocolumn
+      \ifnum \col@number=\@ne
+        \@maketitle
+      \else
+        \twocolumn[\@maketitle]%
+      \fi
+    \else
+      \global\@topnum\z@   
+      \@maketitle
+    \fi
+    \thispagestyle{plain}\@thanks
+  \endgroup
+  \setcounter{footnote}{0}%
+  \global\let\thanks\relax
+  \global\let\maketitle\relax
+  \global\let\@maketitle\relax
+  \global\let\@thanks\@empty
+  \global\let\@author\@empty
+  \global\let\@date\@empty
+  \global\let\@title\@empty
+  \global\let\title\relax
+  \global\let\author\relax
+  \global\let\date\relax
+  \global\let\and\relax
+}
+\def\@maketitle{%
+  \null
+  \vskip 2em%
+  \begin{center}%
+  \let \footnote \thanks
+    {\LARGE \@title \par}%
+    \vskip 1.5em%
+    {\large
+      \lineskip .5em%
+      \begin{tabular}[t]{c}%
+        \@author
+      \end{tabular}\par}%
+    \vskip 1em%
+    {\large \@date}%
+  \end{center}%
+  \par
+  \vskip 1.5em}
+\fi%
+\renewenvironment{titlepage}{%
+      \if@twocolumn
+        \@restonecoltrue\onecolumn
+      \else
+        \@restonecolfalse  
+      \fi
+      \thispagestyle{empty}%
+      \setcounter{page}\@ne
+    }%
+    {\if@restonecol\twocolumn \else \newpage \fi
+     \if@twoside\else
+        \setcounter{page}\@ne
+     \fi
+    }
+}{%   
+%    \end{macrocode}
+%  So much for the ordinary \LaTeXe{} kernel code.  Next follows 
+%  the code borrowed from the \textsf{koma-script} bundle by Markus
+%  Kohm,\footnote{Special thanks to Markus Kohm 
+%  (\texttt{Markus\underline{\space}Kohm@ka2.maus.de}) 
+%  for letting me incorporate this 
+%  code.} also with some modifications.  
+%    \begin{macrocode}
+\if@titlepage
+    \newcommand*\maketitle[1][1]{\begin{titlepage}%
+    \setcounter{page}{#1}
+    \let\footnotesize\small
+    \let\footnoterule\relax
+    \let\footnote\thanks
+    \ifx\@extratitle\@empty \else
+        \noindent\@extratitle\next@tpage\thispagestyle{empty}
+    \fi
+    \ifx\@titlehead\@empty \else
+        \noindent\begin{minipage}[t]{\textwidth}
+        \@titlehead
+        \end{minipage}\par
+    \fi
+    \null\vfill
+    \begin{center}
+    \ifx\@subject\@empty \else
+        {\Large \@subject \par}
+        \vskip 3em
+    \fi
+    {\huge {\sectfont \@title \par}}
+    \vskip 3em
+    {\Large \lineskip 0.75em
+    \begin{tabular}[t]{c}
+        \@author
+    \end{tabular}\par}
+    \vskip 1.5em
+    {\Large \@date \par}
+    \vskip \z@ \@plus3fill
+    {\Large \@publishers \par}
+    \vskip 3em
+    \end{center}\par
+    \@thanks
+    \vfill\null
+    \if@twoside\next@tpage
+        \noindent\begin{minipage}[t]{\textwidth}
+        \@uppertitleback
+        \end{minipage}\par
+        \vfill
+        \noindent\begin{minipage}[b]{\textwidth}
+        \@lowertitleback
+        \end{minipage}
+    \fi
+    \ifx\@dedication\@empty \else
+        \next@tpage\null\vfill
+        {\centering \Large \@dedication \par}
+        \vskip \z@ \@plus3fill
+        \if@twoside \next@tpage \fi
+    \fi
+    \end{titlepage}
+    \setcounter{footnote}{0}%
+    \global\let\thanks\relax
+    \global\let\maketitle\relax
+    \global\let\@thanks\@empty
+    \global\let\@author\@empty
+    \global\let\@date\@empty
+    \global\let\@title\@empty
+    \global\let\@extratitle\@empty
+    \global\let\@titlehead\@empty
+    \global\let\@subject\@empty
+    \global\let\@publishers\@empty
+    \global\let\@uppertitleback\@empty
+    \global\let\@lowertitleback\@empty
+    \global\let\@dedication\@empty
+    \global\let\author\relax
+    \global\let\title\relax
+    \global\let\extratitle\relax
+    \global\let\titlehead\relax
+    \global\let\subject\relax
+    \global\let\publishers\relax
+    \global\let\uppertitleback\relax
+    \global\let\lowertitleback\relax
+    \global\let\dedication\relax
+    \global\let\date\relax
+    \global\let\and\relax}
+\else
+     \newcommand*\maketitle[1][1]{\par
+       \begingroup
+         \renewcommand\thefootnote{\@fnsymbol\c@footnote}%
+         \def\@makefnmark{\rlap{\@textsuperscript{\normalfont\@thefnmark}}}%
+         \long\def\@makefntext##1{\parindent 1em\noindent
+            \hb@xt@1.8em{%
+                \hss\@textsuperscript{\normalfont\@thefnmark}}##1}%
+         \if@twocolumn
+           \ifnum \col@number=\@ne
+             \@maketitle
+           \else
+             \twocolumn[\@maketitle]%
+           \fi
+         \else
+           \global\@topnum\z@   
+           \@maketitle
+         \fi
+         \thispagestyle{plain}\@thanks
+       \endgroup
+       \setcounter{footnote}{0}%
+       \let\thanks\relax
+       \let\maketitle\relax
+       \let\@maketitle\relax
+       \global\let\@thanks\@empty
+       \global\let\@author\@empty
+       \global\let\@date\@empty
+       \global\let\@title\@empty
+       \global\let\@extratitle\@empty
+       \global\let\@titlehead\@empty
+       \global\let\@subject\@empty
+       \global\let\@publishers\@empty
+       \global\let\@uppertitleback\@empty
+       \global\let\@lowertitleback\@empty
+       \global\let\@dedication\@empty
+       \global\let\author\relax
+       \global\let\title\relax
+       \global\let\extratitle\relax
+       \global\let\titlehead\relax
+       \global\let\subject\relax
+       \global\let\publishers\relax
+       \global\let\uppertitleback\relax
+       \global\let\lowertitleback\relax
+       \global\let\dedication\relax
+       \global\let\date\relax
+       \global\let\and\relax}
+\fi
+\def\@maketitle{%
+    \let\footnote\thanks
+    \ifx\@extratitle\@empty \else
+        \noindent\@extratitle \next@tpage \if@twoside \null\next@tpage \fi
+    \fi
+    \ifx\@titlehead\@empty \else
+        \noindent\begin{minipage}[t]{\textwidth}
+        \@titlehead
+        \end{minipage}\par
+    \fi
+    \null
+    \vskip 2em%
+    \begin{center}%
+    \ifx\@subject\@empty \else
+        {\Large \@subject \par}
+        \vskip 1.5em
+    \fi
+    {\huge \@title \par}%
+    \vskip 1.5em%
+    {\Large
+      \lineskip .5em%
+      \begin{tabular}[t]{c}%
+        \@author
+      \end{tabular}\par}%
+    \vskip 1em%
+    {\Large \@date \par}%
+    \vskip \z@ \@plus 1em
+    {\Large \@publishers \par}
+    \ifx\@dedication\@empty \else
+        \vskip 2em
+        {\Large \@dedication \par}
+    \fi
+  \end{center}%
+  \par
+  \vskip 2em}%
+\renewenvironment{titlepage}{%
+      \if@twocolumn
+        \@restonecoltrue\onecolumn
+      \else
+        \@restonecolfalse
+      \fi
+      \thispagestyle{empty}%
+      \if@compatibility
+        \setcounter{page}{0}
+      \fi}%
+    {\if@restonecol\twocolumn \else \newpage \fi}%
+}%
+}
+%    \end{macrocode}
+%  \par This brings us to the end of \textsf{vrsion}.  Hope you'll 
+%  enjoy it!
+% \iffalse
+%</paketkod>
+% \fi
+%
+% \Finale
+%
+\endinput
diff --git a/Master/texmf-dist/source/latex/vrsion/vrsion.ins b/Master/texmf-dist/source/latex/vrsion/vrsion.ins
new file mode 100644
index 00000000000..73c07485020
--- /dev/null
+++ b/Master/texmf-dist/source/latex/vrsion/vrsion.ins
@@ -0,0 +1,50 @@
+% 
+%  This is file `vrsion.ins', the installation file for the 
+%  `vrsion' package.  Last revised 1997/02/22.  
+%
+%  Copyright (c) 1994-1997 by Mats Dahlgren <matsd@homenet.se>.
+%  All rights reserved. 
+%
+%  You may use the 'vrsion' package freely, but at your own
+%  risk.  The author of vrsion.dtx and vrsion.ins (the
+%  complete 'vrsion' package distribution) can not be held
+%  responsible for any consequence of your using any of these
+%  files, or files created from these, including hardware,
+%  software, and data damage.  You may not make any changes to
+%  the files vrsion.dtx or vrsion.ins.  You may incorporate
+%  the code from these files in other files under different
+%  names, provided the original author is given full credit for
+%  his work and that you yourself take the complaints from the
+%  user(s) of your file(s).  You may freely distribute the
+%  files vrsion.dtx and vrsion.ins, provided: 1. You do not
+%  take money for the distribution or use of these files except
+%  for a nominal charge for diskettes and postage; and 2. You
+%  always distribute 'vrsion.dtx' and 'vrsion.ins' together
+%  at the same time. 
+%
+\def\batchfile{vrsion.ins}
+\input docstrip.tex
+
+\keepsilent
+\preamble
+
+Copyright (c) 1994-1997 by Mats Dahlgren <matsd@homenet.se>.  
+All rights reserved.  See the file `vrsion.ins' for information
+on how you may (re-)distribute the `vrsion' package files.
+
+\endpreamble
+\generate{\file{vrsion.sty}{\from{vrsion.dtx}{paketkod}}%  
+}
+
+\Msg{************************************************************}
+\Msg{ }
+\Msg{  To finish the installation you have to move the file}
+\Msg{  `vrsion.sty' into a directory searched by TeX.}
+\Msg{ }
+\Msg{  To produce the documentation run the file `vrsion.dtx'}
+\Msg{  through LaTeX.}
+\Msg{ }
+\Msg{***********************************************************}
+%%
+%%  end of file   vrsion.ins
+%%