trunk/Master/texmf-dist/source/latex/euro

git-svn-id: svn://tug.org/texlive/trunk@264 c570f23f-e606-0410-a88d-b1316a301751

3 files changed, 1534 insertions, 0 deletions

diff --git a/Master/texmf-dist/source/latex/euro/Makefile b/Master/texmf-dist/source/latex/euro/Makefile
new file mode 100644
index 00000000000..1c09c38e583
--- /dev/null
+++ b/Master/texmf-dist/source/latex/euro/Makefile
@@ -0,0 +1,65 @@
+# $Id: Makefile,v 1.6 2005/03/07 14:22:19 m Exp $
+
+NAME=euro
+ARCHIVE_NAME=$(NAME).tar.gz
+ARCHIVE_CONTENTS=$(NAME).dtx Makefile $(NAME).txt $(NAME).ins $(NAME).pdf
+MAKEIDXOPT=
+DVIPSOPT= #-Pcmz -Pamz
+DEP=$(NAME).sty
+
+all: $(NAME).ps
+
+print: $(NAME).ps
+	psbook $(NAME).ps|psnup -2|psselect -e|lpr
+	@ echo -n revert paper stack and hit return
+	@ read key
+	psbook $(NAME).ps|psnup -2|psselect -o -r|lpr
+
+ps: $(NAME).ps
+
+%.ps: %.dvi
+	dvips $(DVIPSOPT) $< -o $@
+
+hyper: $(NAME).dtx $(NAME).sty
+	pdflatex "\relax\let\makehyperref\active\input $(NAME).dtx"
+
+pdf: $(NAME).pdf
+
+%.pdf: %.dtx
+	pdflatex $<
+
+arc: archive
+
+archive: $(NAME).ins $(NAME).pdf
+	@ tar -czf $(ARCHIVE_NAME) $(ARCHIVE_CONTENTS)
+	@ echo $(ARCHIVE_NAME):
+	@ echo ====================
+	@ tar -tzf $(ARCHIVE_NAME)
+
+clean: 
+	rm -f $(NAME).{log,toc,lot,lof,idx,ilg,ind,aux,blg,bbl,dvi,ins}
+
+distclean: clean
+	rm -f $(NAME).{ps,pdf,sty} $(ARCHIVE_NAME)
+
+
+REFWARN = 'Rerun to get cross-references'
+LATEXMAX = 5
+
+%.dvi: %.dtx $(DEP)
+	latex $<
+	RUNS=$(LATEXMAX); \
+	while [ $$RUNS -gt 0 ] ; do \
+		if grep $(REFWARN) $*.log > /dev/null; \
+		then latex $< ; else break; fi; \
+		RUNS=`expr $$RUNS - 1`; \
+	done
+
+$(NAME).sty: $(NAME).ins FORCE
+	tex $(NAME).ins
+
+$(NAME).ins:
+	latex $(NAME).dtx
+
+FORCE:
+
diff --git a/Master/texmf-dist/source/latex/euro/euro.dtx b/Master/texmf-dist/source/latex/euro/euro.dtx
new file mode 100644
index 00000000000..e65b69c8348
--- /dev/null
+++ b/Master/texmf-dist/source/latex/euro/euro.dtx
@@ -0,0 +1,1459 @@
+% \iffalse
+%% File: euro.dtx      Copyright (C) 1999--2005    Melchior FRANZ
+%% $Id: euro.dtx,v 1.14 2005/03/07 14:22:19 m Exp $
+%% $Version: 1.1 $
+%<*preamble>
+%
+%
+%
+% on Unix/Linux just run "make" to get the style file and the documentation;
+% else generate the driver euro.ins (if you don't already have it):
+%
+%     $ latex euro.dtx
+%
+% Now generate the style file:
+%
+%     $ tex euro.ins
+%
+% And finally to produce the documentation run LaTeX three times:
+%
+%     $ latex euro.dtx
+%
+%
+%
+%
+% This package needs the fp-package!
+%
+% fp      -- CTAN//macros/latex/contrib/other/fp/  --  (by Michael MEHLICH)
+%
+%$
+%% ====================================================================
+%%  @LaTeX-package-file{
+%%     author          = "Melchior FRANZ",
+%%     version         = "1.1",
+%%     date            = "7 March 2005",
+%%     filename        = "euro.dtx",
+%%     address         = "Melchior FRANZ
+%%                        Rieder Hauptstrasse 52
+%%                        A-5212 SCHNEEGATTERN
+%%                        AUSTRIA",
+%%     telephone       = "++43 7746 3109",
+%%     URL             = "http://members.aon.at/mfranz/TeX/",
+%%     email           = "mfranz \# aon : at",
+%%     codetable       = "ISO/ASCII",
+%%     keywords        = "euro",
+%%     supported       = "yes",
+%%     docstring       = "This document describes the euro package, which
+%%                        converts arbitrary national currency amounts
+%%                        using the Euro as base unit, and typesets monetary amounts
+%%                        in almost any desired way. Write e.g. \ATS{17.6} to get
+%%                        something like `17,60 \"oS  (1,28 Euro)' automatically.
+%%                        Conversion rates for the so-called Euro-zone countries
+%%                        are already built-in. Further rates can be added easily."
+%%  }
+%% ====================================================================
+%
+% COPYRIGHT NOTICE:
+% This package is free software that can be redistributed and/or modified
+% under the terms of the LaTeX Project Public License as specified
+% in the file macros/latex/base/lppl.txt on any CTAN archive server.
+%
+% Note that you may freely distribute modified versions of this documentation, with one
+% exception: If you modify or remove section "The European Union & Software Patents",
+% you agree that your and/or your company's/institution's name may be listed in said
+% section in any official distribution.
+%</preamble>
+%
+%
+%
+%<*batchfile>
+\begin{filecontents}{euro.ins}
+\def\batchfile{euro.ins}
+\input docstrip.tex
+\askforoverwritefalse
+\keepsilent
+\generate{\file{euro.sty}{\from{euro.dtx}{package}}}
+\endbatchfile
+\end{filecontents}
+%</batchfile>
+%
+%
+%<*driver>
+\def\fileversion{1.1}
+\def\filedate{2005/03/07}
+\documentclass{ltxdoc}
+%
+%
+%
+\ifx\makehyperref\EUROundefined
+    \newcommand*\texorpdfstring[2]{#1}
+    \newcommand*\color[1]{}
+\else   ^^A for "make hyper"
+    \usepackage{hyperref}
+    \hypersetup{
+        bookmarksopen,
+        colorlinks,
+        pdftitle={The euro package},
+        pdfauthor={Melchior FRANZ},
+        pdfsubject={${}$Id: euro.dtx,v 1.14 2005/03/07 14:22:19 m Exp ${}$},
+        pdfkeywords={currency, euro, monetary, conversion}
+    }
+    \usepackage[pdftex]{graphicx,color}
+\fi
+%
+%
+%
+\IfFileExists{euro.sty}
+  {\usepackage{euro}[1999/05/15]\let\EUROSTYfound\active}
+  {\GenericWarning{euro.dtx}
+    {Package file `euro.sty' not found. All the instructive^^J^^A
+    examples will be replaced by boldfaced question marks.^^J^^A
+    (Generate `euro.sty' by (La)TeXing `euro.ins' and process^^J^^A
+    `euro.dtx' three times to get the documentation right.)^^J}
+  \newcommand*\EURO[1]{\EUROii}
+  \newcommand*\EUROii[2][]{\textbf{??}}
+  \newcommand*\EUROFORMAT[2]{}
+  \newcommand*\EUROADD[3]{}
+  \newcommand*\EUROSYM[2]{}}
+%
+\usepackage{multicol}
+\setcounter{tocdepth}{2}
+\begin{document}
+\DocInput{euro.dtx}
+\end{document}
+%</driver>
+% \fi
+%
+%
+% \CheckSum{452}
+% \CharacterTable
+%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%   Digits        \0\1\2\3\4\5\6\7\8\9
+%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%   Dollar        \$     Percent       \%     Ampersand     \&
+%   Acute accent  \'     Left paren    \(     Right paren   \)
+%   Asterisk      \*     Plus          \+     Comma         \,
+%   Minus         \-     Point         \.     Solidus       \/
+%   Colon         \:     Semicolon     \;     Less than     \<
+%   Equals        \=     Greater than  \>     Question mark \?
+%   Commercial at \@     Left bracket  \[     Backslash     \\
+%   Right bracket \]     Circumflex    \^     Underscore    \_
+%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%   Right brace   \}     Tilde         \~}
+%
+%
+% \newcommand*\opt{\textsf}
+% \newcommand*\DescribeOption[1]{\leavevmode
+%   \marginpar{\raggedleft\opt{\strut#1\strut}}\ignorespaces}
+%
+% \newcommand*\ATS{\EURO{ATS}}
+% \newcommand*\EUR{\EURO{EUR}}
+% \newcommand*\DEM{\EURO{DEM}}
+% \newcommand*\ESP{\EURO{ESP}}
+% \newcommand*\ITL{\EURO{ITL}}
+% \newcommand*\USD[1]{{%
+%   \EUROFORMAT{main}{\in}%
+%   \EUROFORMAT{in}{\val\,\$}%
+%   \EUROFORMAT{EUR}{\form,.,\round{-2}}%
+%   \EURO{EUR}{#1}}}
+% \newcommand*\NUM[1]{{%
+%   \EUROFORMAT{main}{\in}%
+%   \EUROFORMAT{in}{\val}%
+%   \EUROFORMAT{EUR}{\form,.,\round{-10}}%
+%   \EURO{EUR}{#1}}}
+%
+%
+% \makeatletter
+% ^^A Don't use this! It's really ugly!      :-(
+% \newcommand*\euro{\unitlength.7em
+%   \begin{picture}(1.2,1)(-.2,.1)
+%     \linethickness{.05em}
+%     \qbezier(.8,.9)(.5,1.2)(.1,.87)
+%     \qbezier(.1,.87)(-.0,.78)(0,.5)
+%     \qbezier(.0,.5)(-.0,.22)(.35,.1)
+%     \qbezier(.35,.1)(.54,.02)(.77,.22)
+%     \put(-.12,.65){\line(1,0){.9}}
+%     \put(-.12,.46){\line(1,0){.8}}
+%   \end{picture}}
+%
+% \newenvironment{example}[1][.45\textwidth]
+%   {\par\medskip\begin{tabular}{p{#1}l}}
+%   {\end{tabular}\noindentafter\medbreak}
+%
+% \newenvironment{syntax}
+%   {\par\medskip\def\<##1>{$\langle$\textit{##1}$\rangle$}%
+%    \indent\begin{tabular}{l}}
+%   {\end{tabular}\noindentafter\medbreak}
+%
+% \newcommand*\noindentafter{\@nobreaktrue\everypar{{\setbox\z@\lastbox}}}
+%
+% \newenvironment{labeling}[1]
+%  {\list{}{\settowidth{\labelwidth}{\textbf{#1}}
+%  \leftmargin\labelwidth\advance\leftmargin\labelsep
+%  \def\makelabel##1{\textbf{##1}\hfil}}}{\endlist}
+%
+% \makeatother
+%
+% \changes{v0.1}{1999/02/01}{initial version}%
+% \changes{v0.2}{1999/05/15}{interface completely new; integer rounding implemented}%
+% \changes{v1.0}{2001/10/12}{greek currency added}%
+% \changes{v1.1}{2003/02/19}{specific currency formats inherit generic settings}%
+%
+%
+%
+%
+% \title{The \texttt{euro} package}
+% \author{Melchior \textsc{FRANZ}}
+% \date{March 7, 2005}
+% \maketitle
+%
+%
+%
+% \begin{abstract}
+% \EUROSYM{EUR}{\euro}^^A  introduce the Euro symbol for within the abstract only
+%
+% This article describes the |euro| package^^A
+%      \footnote{This package has version number \fileversion, last revised \filedate.},
+% which converts arbitrary currency units into each other using the \emph{Euro}
+% (official symbol \euro
+%      \footnote{The \euro\ symbol in this documentation is
+%      `handmade'---it is really ugly and not to be used in real documents. Take the well designed symbol
+%      defined e.\,g.~in the |eurosym| package by \textsc{Henrik Theiling} eventually using
+%      the |eurofont| package by \textsc{Rowland McDonnell} to select the proper fo(u)nt/shape.}^^A
+% ) as base unit, and formats monetary amounts in almost any desired way.
+% The respective conversion rates are predefined for the national
+% currency units of the \emph{Euro-zone} countries, every other
+% currency unit can easily be added.
+% The package allows to type e.\,g.\ |\ATS{17.6}| to get something
+% like \ATS{17.6}. All necessary calculations are with high precision done
+% by the great |fp| package^^A
+%      \footnote{\(\langle\)|CTAN//macros/latex/contrib/other/fp/|\(\rangle\)}
+% by \textsc{Michael Mehlich},
+% which you have to install to get this package working.
+% The package complies with the concerned rules and orders of the European
+% Council.
+% \end{abstract}
+%
+%
+%
+% {\setlength{\parskip}{0pt}\tableofcontents}
+% \addtocontents{toc}{\protect\begin{multicols}{2}}
+%
+%
+% \section{Introduction}
+%
+% Twelve of the fifteen members of the European Union have agreed
+% to replace their national currencies by a common currency, the
+% \emph{Euro}. Before the 1\textsuperscript{st} of January 2001 the Euro was only a
+% unit for calculations, with fixed conversion rates for
+% each of the old currencies. Since then the Euro is actual money with
+% coins and bank notes. The Francs, the D-Mark, the Schilling,
+% they are history.
+% Several further countries will join the European Union over
+% the next years, and sooner or later also the so-called \emph{Euro-zone}.
+% It's still common practice in Europe to write monetary amounts both in the national
+% currency and in the new \euro~currency,
+% thus helping to become familiar with the \emph{Euro}.
+%
+% But it's a nuisance to convert every value by hand or even with
+% a calculator. Let our computers do all the hard work.
+% Although \TeX\ is unable to do such calculations with
+% its basic arithmetic functions, there's a way out: The |fp| package
+% allows to deal with numbers ranging from
+% \(-999999999999999999{,}999999999999999999\) to
+% \(+999999999999999999{,}999999999999999999\) with high precision.
+%
+% Since there are so many currencies and different possible formats,
+% this package provides only a customizable interface. All parameters are
+% predefined in a common way, though, so that no further definitions will be
+% necessary in most cases. The package tries to load an optional file
+% `|euro.cfg|' where such local customizing commands may be placed in
+% (see section~\ref{sec:config} for further explanation).
+%
+%
+%
+%
+%
+% \section{How to use the package}
+%
+% \subsection{The main macro}
+%
+% The \DescribeMacro{\EURO}|\EURO| command does the main work.
+% It takes the \textit{source currency unit,} an optional \textit{destination currency unit,}
+% both as three-digits \textsc{ISO} currency codes (see table \ref{tab:iso}), and
+% the respective \emph{money amount}.
+%
+% \begin{syntax}
+% |\EURO{|\<source currency unit>|}[|\<destination currency unit>|]{|\<amount>|}|
+% \end{syntax}
+%
+%
+% \begin{table}
+% \begin{quote}
+% \begin{center}
+% \begin{tabular}{ll@{\hspace{2cm}}ll}
+% \texttt{EUR}& Europe&    \texttt{GRD}& Greece\\
+% \texttt{ATS}& Austria&   \texttt{IEP}& Ireland\\
+% \texttt{BEF}& Belgium&   \texttt{ITL}& Italy\\
+% \texttt{DEM}& Germany&   \texttt{LUF}& Luxembourg\\
+% \texttt{ESP}& Spain&     \texttt{NLG}& The Netherlands\\
+% \texttt{FIM}& Finland&  \texttt{PTE}& Portugal\\
+% \texttt{FRF}& France
+% \end{tabular}
+%
+% \caption{ISO currency codes of the \emph{Euro} and of the twelve \emph{Euro-zone} countries.}
+% \label{tab:iso}
+% \end{center}
+% \end{quote}
+% \end{table}
+%
+% A dot is to be used as \emph{decimal `point'} separating a number's integer and
+% fractional part. Numbers may of course be negative.
+% If the optional destination currency unit is omitted, the \emph{Euro} is taken.
+%
+% \begin{example}
+% |\EURO{BEF}[FIM]{70}|&  \EURO{BEF}[FIM]{70}\\
+% |\EURO{FIM}[BEF]{70}|&  \EURO{FIM}[BEF]{70}\\
+% |\EURO{BEF}[BEF]{70}|&  \EURO{BEF}[BEF]{70}\rlap{\hspace{3.5em}[surprised?]}\\
+% |\EURO{FIM}{17.8}|&     \EURO{FIM}{17.8}
+% \end{example}
+% \null
+%
+%
+%
+%
+% \subsection{How to change the local style}
+%
+% The ISO currency codes don't really look good in running text. You
+% can replace them by some other currency symbol or tag using the
+% \DescribeMacro{\EUROSYM}|\EUROSYM| command.
+%
+% \begin{syntax}
+% |\EUROSYM{|\<currency unit>|}{|\<symbol>|}|
+% \end{syntax}
+%
+% We Austrians, for example, prefer to write `\"oS' instead of `ATS'.
+% We don't have to write |\EUROSYM{ATS}{\"oS}| though, because this national
+% style (like those of some other countries) is already predefined. If your
+% national style is still missing, please drop me a line, and I will insert it.
+% Meanwhile the \textsc{ISO} currency codes are used in such cases.
+%
+% \begin{example}
+% |\EURO{FRF}{16.3}|&      \EURO{FRF}{16.3}\\
+% |\EUROSYM{FRF}{Francs}|&\\
+% |\EURO{FRF}{16.3}|&      \EUROSYM{FRF}{Francs}\EURO{FRF}{16.3}
+% \end{example}
+%
+% The official Euro symbol is not provided by default, since there are a lot of
+% different fonts and methods to produce an \euro\ sign. Type
+% |\EUROSYM{EUR}{|\(\langle\)\textit{euro symbol}\(\rangle\)|}| to
+% replace the word `Euro' with your local \euro\ sign.
+% (I'm still hoping that some day the text companion fonts will contain the official in
+% addition or instead of the phantasy \emph{Euro} symbols.)
+% This documentation, for example, says |\EUROSYM{EUR}{\euro}|
+% because it has its own |\euro| symbol built-in. (Isn't it beautiful?)
+%
+% \begin{example}
+% |\EURO{LUF}{137.8}|&      \EURO{LUF}{137.8}\\
+% |\EUROSYM{EUR}{\euro}|&\\
+% |\EURO{LUF}{137.8}|&      \EUROSYM{EUR}{\euro}\EURO{LUF}{137.8}
+% \end{example}
+%
+% \EUROSYM{EUR}{\euro}    ^^A define this globally now
+%
+%
+% Writing e.\,g.~|\EURO{ATS}{...}| again and again is cumbersome, so it's recommended to
+% define macros for the most often used currency units. You may put such definitions
+% into your local configuration file (see section~\ref{sec:config}).
+%
+% \begin{example}
+% |\newcommand*\ATS{\EURO{ATS}}|\\
+% |\ATS{9.90}|& \ATS{9.90}\\
+% |\ATS[ITL]{19.90}|& \ATS[ITL]{19.90}
+% \end{example}
+% \null
+%
+%
+%
+%
+% \subsection{The package options}
+% \label{sec:options}
+%
+% The |euro| package provides six package options. See table~\ref{tab:options} for
+% a short demonstration.
+%
+% \begin{labeling}{\opt{emdash}~~}
+% \item[\textbf{\opt{eco}}]
+%   The \opt{eco} option typesets monetary amounts as, I think,
+%   economists prefer it, with \textsc{ISO} codes preceding the values.
+% \item[\textbf{\opt{dots}}]
+%   The \opt{dots} option inserts dots as three-digits group
+%   separators. (Default is a little space like \rule{.4pt}{.75em}\,\rule{.4pt}{.75em}.)
+% \item[\textbf{\opt{table}}]
+%   Turns the \emph{table mode} globally on.
+%   While integers are normally printed without decimal point and fractional part (sic!),
+%   it may especially in tables be desirable to typeset a decimal point followed by a dash.
+%   See section \ref{sec:align} for how to keep this behavior local to a particular table.
+% \item[\textbf{\opt{emdash}}]
+%   Lets the \opt{table} dashes be `---'. Doesn't turn on \emph{table mode}.
+%   (This option is selected by default, so it doesn't make much sense at
+%   the moment. But this might change some day.)
+% \item[\textbf{\opt{endash}}]
+%   Lets the \opt{table} dashes be `--'. Doesn't turn on \emph{table mode}.
+% \item[\textbf{\opt{zeros}}]
+%   Lets zeros be printed instead of dashes. Doesn't turn on \emph{table mode}.
+% \end{labeling}
+%
+%
+% \begin{table}
+% \begin{center}
+%^^A the options are only faked here   ;-)
+% \makeatletter
+% \begin{tabular}{lr}%
+% |\EURO{ATS}{1000}| with&\\[.5ex]
+% \hline\\[-1.5ex]
+% (default settings)&
+%   \EURO{ATS}{1000}\\
+% \opt{dots}&\let\EURO@lsep.\let\EURO@rsep.^^A
+%   \EURO{ATS}{1000}\\
+% \opt{endash}&\let\EURO@table\EURO@endash
+%   \EUROFORMAT{main}{\table\in\ (\out)}^^A
+%   \EURO{ATS}{1000}\\
+% \opt{emdash}&\let\EURO@table\EURO@emdash
+%   \EUROFORMAT{main}{\table\in\ (\out)}^^A
+%   \EURO{ATS}{1000}\\
+% \opt{zeros}&\let\EURO@table\EURO@zeros
+%   \EUROFORMAT{main}{\table\in\ (\out)}^^A
+%   \EURO{ATS}{1000}\\
+% \opt{eco}&
+%   \EUROFORMAT{in}{\iso~\val}^^A
+%   \EUROFORMAT{out}{\iso~\val}^^A
+%   \EURO{ATS}{1000}\\
+% \opt{eco,endash}&\let\EURO@table\EURO@endash
+%   \EUROFORMAT{main}{\table\in\ (\out)}^^A
+%   \EUROFORMAT{in}{\iso~\val}^^A
+%   \EUROFORMAT{out}{\iso~\val}^^A
+%   \EURO{ATS}{1000}\\
+% \opt{eco,emdash}&\let\EURO@table\EURO@emdash
+%   \EUROFORMAT{main}{\table\in\ (\out)}^^A
+%   \EUROFORMAT{in}{\iso~\val}^^A
+%   \EUROFORMAT{out}{\iso~\val}^^A
+%   \EURO{ATS}{1000}\\
+%   \end{tabular}
+% \end{center}
+% \caption{Package options}
+% \label{tab:options}
+% \end{table}
+%
+%
+%
+%
+% \subsection{Adding currency units}
+%
+% If some day further countries will join the \emph{Euro-zone,} you can easily
+% add their currency units to your document files or, better, to
+% your local `|euro.cfg|' configuration file.
+% The |euro| package will then, of course, be updated as soon as possible.
+%
+% \begin{syntax}
+% |\EUROADD{|\<ISO code>|}{|\<national style/symbol>|}{|\<conversion rate>|}|
+% \end{syntax}
+%
+% The conversion rate describes, how many units of the new currency
+% equal 1~\euro. You can also add currencies, that will
+% probably never become member of the \emph{Euro-zone,} like the US-\$. But be aware that such
+% conversion rates may change daily/hourly! See \(\langle\)|http://europa.eu.int/|\(\rangle\) for the
+% actual rates. The used \textsc{ISO} code serves as identifier for the
+% respective currency unit.
+%
+% \EUROADD{GBP}{\textit{\char`\$}}{0.6694}
+% \begin{example}
+% |%  1 Euro = 0.6694 Pound Sterling    (March 11, 1999)|\hspace*{-4.5cm}\\
+% |%|\\
+% |\EUROADD{GBP}{\textsterling}{0.6694}|\hspace*{-3cm}\\
+% |\newcommand*\GBP{\EURO{GBP}}|\\
+% \\
+% |\GBP{47.11}|&            \EURO{GBP}{47.11}\\
+% |\GBP[FRF]{47.11}|&       \EURO{GBP}[FRF]{47.11}\\
+% |\EURO{EUR}[GBP]{1}|&     \EURO{EUR}[GBP]{1}
+% \end{example}
+%
+% The pound symbol in this example looks a bit too slanted. You'd better take
+% |\textsterling| from the |textcomp| package, which I didn't.
+%
+%
+%
+%
+%
+%
+% \section{Further customization}
+% \label{sec:format}
+%
+% The desirable format for monetary amounts may differ from country to country and from purpose to purpose.
+% The |euro| package uses three kinds of format strings to customize the format, each of which may
+% consist of some \emph{reserved keywords} and any other \TeX\ commands. It's a good idea
+% to put such commands in your local configuration file (see section~\ref{sec:config}).
+%
+%
+%
+% \subsection{The main format}
+%
+% The main format defines how source and destination currency shall be arranged.
+%
+% \begin{syntax}
+% |\EUROFORMAT{main}{|\<main format string>|}|
+% \end{syntax}
+%
+% The \emph{reserved keywords} |\in| and |\out| stand for the source and the destination currency.
+% The following table shows some possible formats with the first line showing the
+% default definition.
+%
+% \begin{example}[.58\hsize]
+%                                         & |\EURO{ATS}{30}| yields\\[.5ex]
+% \hline\\[-1.5ex]
+% |\EUROFORMAT{main}{\in\ (\out)}|&         \EURO{ATS}{30}\\
+% |\EUROFORMAT{main}{\in\slash\out}|&       \EUROFORMAT{main}{\in\slash\out}\EURO{ATS}{30}\\
+% |\EUROFORMAT{main}{\in\ ($=$\,\out)}|&    \EUROFORMAT{main}{\in\ ($=$\,\out)}\EURO{ATS}{30}\\
+% |\EUROFORMAT{main}{\in\ (that is \out)}|& \EUROFORMAT{main}{\in\ (that is \out)}\EURO{ATS}{30}\\
+% |\EUROFORMAT{main}{\out}|&                \EUROFORMAT{main}{\out}\EURO{ATS}{30}
+% \end{example}
+% \null
+%
+%
+%
+%
+% \subsection{The currency format}
+%
+%
+% The currency format defines how the source and the destination currency
+% shall be formatted.
+%
+% \begin{syntax}
+% |\EUROFORMAT{in}{|\<currency format string>|}|\\
+% |\EUROFORMAT{out}{|\<currency format string>|}|
+% \end{syntax}
+%
+% The \emph{reserved keywords} |\val|, |\iso| and |\sym| have a special meaning, but
+% almost every other \TeX\ command may be used as well.
+%
+% \medskip\indent
+% \begin{tabular}{@{\texttt\bgroup}l@{\egroup\quad}p{.8\hsize}}
+% \string\val&   monetary amount\\
+% \string\iso&   \textsc{ISO} currency code\\
+% \string\sym&   national currency style\slash tag (if defined; \textsc{ISO} code else)\\
+% \end{tabular}
+%
+% \medskip\noindent
+% For some currency units
+% the |\sym| command produces only the \textsc{ISO} code instead of the national style,
+% which I didn't know. This will (with your help!) be changed in future releases.
+% The following table shows the most obvious arrangements. All said about the |in| format
+% string is also true for the |out| format.
+%
+% {\EUROFORMAT{main}{\in}\newcommand\EUROaux{\hspace{1.2cm}}
+% \begin{example}[.58\textwidth]
+% with |\EUROFORMAT{main}{\in}|  & |\EURO{ATS}{30}| yields\\
+% \hspace{2cm}and&\\[.5ex]
+% \hline\\[-1.5ex]
+% |\EUROFORMAT{in}{\val~\sym}|&  \EUROaux\EURO{ATS}{30}\\
+% |\EUROFORMAT{in}{\val~\iso}|&  \EUROaux\EUROFORMAT{in}{\val~\iso}\EURO{ATS}{30}\\
+% |\EUROFORMAT{in}{\sym~\val}|&  \EUROaux\EUROFORMAT{in}{\sym~\val}\EURO{ATS}{30}\\
+% |\EUROFORMAT{in}{\iso~\val}|&  \EUROaux\EUROFORMAT{in}{\iso~\val}\EURO{ATS}{30}
+% \end{example}}
+% \null
+%
+%
+%
+%
+%
+%
+%
+% \subsection{The number format}
+%
+% The number format, finally, defines how the numbers themselves should be
+% typeset considering positive\slash negative numbers, rounding and so on.
+%
+% \begin{syntax}
+% |\EUROFORMAT{all}{|\<number format>|}|\\
+% |\EUROFORMAT{|\<ISO currency code>|}{|\<number format>|}|
+% \end{syntax}
+%
+% The definitions labeled with |all| will be used for all currency units.
+% By using |\EUROFORMAT| with one of the three-digits \textsc{ISO} codes
+% as the first argument, these general settings can be overridden for this
+% currency.
+% Only the \emph{Italian Lira} is defined this way by default, because it
+% wouldn't make sense to write \emph{Lira} amounts with two fractional digits
+% like the other European currencies.^^A
+% \footnote{The package, for example, says something like
+% \texttt{\string\EUROFORMAT\char`\{ITL\char`\}\char`\{\string\round\char`\{0\char`\}\char`\}}.} ^^A   8-P
+%
+% The \textit{number format string} may contain the commands |\form|,
+% |\round|, |\zero|, |\plus|, and |\minus|, each of which takes one or
+% more arguments. You have only to mention the points that shall differ
+% from the default behavior.
+% Such a number format might look horrible like this
+%
+% \begin{example}
+% |\EUROFORMAT{all}{%|\\
+% |  \form{\,}{,}{\,}%|\\
+% |  \round{-2}%|\\
+% |  \zero{0}{0}{}%|\\
+% |  \plus{}{}%|\\
+% |  \minus{\(-\)}{}}|
+% \end{example}
+%
+% which, by fortune, is the predefined default format\footnote{Well, that is a lie: In fact,
+% it is only the equivalent of the default definition, which is defined in another way.},
+% but it might as well be empty or contain only one of the commands and its arguments.
+% Here again all arguments are predefined quite reasonably, so you won't have
+% to bother with these verbose definitions.
+%
+% To make further explanations easier, figure~\ref{fig:nomencl} describes the elements
+% that a number may consist of (using my own nomenclature).
+%
+% \begin{center}
+% \begin{figure}
+% {\setlength{\unitlength}{1mm}
+% \begin{picture}(80,60)(-15,10)
+%   \put(50,55){\makebox(0,0)[l]{preamble}}
+%     \put(48,55){\line(-1,0){46.5}}
+%     \put(1.5,55){\line(0,-1){27}}
+%   \put(50,50){\makebox(0,0)[l]{integer part}}
+%     \put(3,24){\makebox(8,10){\downbracefill}}
+%     \put(48,50){\line(-1,0){41}}
+%     \put(7,50){\line(0,-1){19}}
+%   \put(50,45){\makebox(0,0)[l]{decimal point}}
+%     \put(48,45){\line(-1,0){36.5}}
+%     \put(11.5,45){\line(0,-1){17}}
+%   \put(50,40){\makebox(0,0)[l]{fractional part}}
+%     \put(12.5,24){\makebox(11,10){\downbracefill}}
+%     \put(48,40){\line(-1,0){30}}
+%     \put(18,40){\line(0,-1){9}}
+%   \put(50,35){\makebox(0,0)[l]{postamble (none in this example)}}
+%     \put(48,35){\line(-1,0){23}}
+%     \put(25,35){\line(0,-1){7}}
+% \put(0,25){\makebox(0,0)[l]{\(-\)1 000,234 567}}
+%   \put(50,15){\makebox(0,0)[l]{fractional group separator}}
+%     \put(48,15){\line(-1,0){30}}
+%     \put(18,15){\line(0,1){8}}
+%   \put(50,10){\makebox(0,0)[l]{integer group separator}}
+%     \put(48,10){\line(-1,0){43}}
+%     \put(5,10){\line(0,1){13}}
+% \end{picture}}
+% \caption{Elements that a number may consist of.}
+% \label{fig:nomencl}
+% \end{figure}
+% \end{center}
+%
+%
+%
+%
+%
+% \subsubsection{The \texttt{\char`\\form} command}
+%
+% The \DescribeMacro{\form}|\form| command takes three arguments: the \emph{integer group separator},
+% the \emph{decimal point} and the \emph{fractional group separator}.
+%
+% \begin{syntax}
+% |\form|\\
+% |  {|\<integer group separator>|}|\\
+% |  {|\<decimal point>|}|\\
+% |  {|\<fractional group separator>|}|
+% \end{syntax}
+%
+%
+% \begin{description}
+% \item[group separators:]
+%   separate groups of three decimal digits to improve legibility of bigger numbers.
+%   It's a small space by default, but taking a space, a dot or just nothing might be
+%   desirable in some cases.
+% \item[decimal point:]
+%   separates a number's integer part from the fractional part. It's a comma by default.
+%
+%   {\EUROFORMAT{main}{\in}
+%   \EUROFORMAT{in}{\align\val\hspace*{1cm}}
+%   \newcommand*\test[3]{\EUROFORMAT{EUR}{\form{#1}{#2}{#3}}\EURO{EUR}{1000.12345}}
+%   \medskip\noindent
+%   \begin{center}
+%   \begin{tabular}{lr}
+%   |\form{.}{,}{.}|&        \test{.}{,}{.}\\
+%   |\form{\,}{,}{\,}|&      \test{\,}{,}{\,}\\
+%   |\form{~}{,}{~}|&        \test{~}{,}{~}\\
+%   |\form{}{,}{}|&          \test{}{,}{}\\
+%   |\form{,}{.}{,}|&        \test{,}{.}{,}\\
+%   |\form{,}{$\cdot$}{,}|&  \test{,}{$\cdot$}{,}
+%   \end{tabular}
+%   \end{center}}
+% \end{description}
+%
+%
+%
+%
+% \subsubsection{The \texttt{\char`\\round} command}
+%
+% The \DescribeMacro{\round}|\round| command takes the \emph{rounding number} as argument.
+%
+% \begin{syntax}
+% |\round{|\<rounding number>|}|
+% \end{syntax}
+%
+% It describes where to round the given money amount. Positive values round to integer digits,
+% negative numbers round to fractional digits. Numbers lower than \(-9\) suppress rounding.
+%
+%   {\EUROFORMAT{main}{\align\in}
+%   \EUROFORMAT{in}{\val}
+%   \newcommand*\test[1]{\EUROFORMAT{EUR}{\round{#1}}\EURO{EUR}{12345.67898765}}
+%   \medskip\noindent
+%   \begin{center}
+%   \begin{tabular}{r@{\hspace{1cm}}r@{\hspace{1.8cm}}}%
+%   \textit{rounding}& \textit{result}\\[.5ex]
+%   \hline\\[-1.5ex]
+%    |-10|&      \test{-10}\\
+%    |-4|&      \test{-4}\\
+%    |-3|&      \test{-3}\\
+%    |-2|&      \test{-2}\\
+%    |-1|&      \test{-1}\\
+%    |0|&       \test{0}\\
+%    |1|&       \test{1}\\
+%    |2|&       \test{2}\\
+%    |3|&       \test{3}\\
+%    |4|&       \test{4}\\
+%    |5|&       \test{5}
+%   \end{tabular}
+%   \end{center}}
+%
+%
+%
+%
+% \subsubsection{The \texttt{\char`\\zero} command}
+%
+% The \DescribeMacro{\zero}|\zero| command describes how to deal with zeros. It takes
+% three arguments: the \emph{overall zero} part, the \emph{integer zero} part and the
+%  \emph{fractional zero} part.
+%
+% \begin{syntax}
+% |\zero{|\<overall zero>|}{|\<integer zero>|}{|\<fractional zero>|}|
+% \end{syntax}
+%
+% \noindent
+% The following table shows some of the possible settings. The first entry is
+% the predefined one, which should be used for running text.
+% The last line shows the number format that is obtained in table mode with
+% the default style \DescribeOption{emdash}\opt{emdash} selected.
+%
+%   {\makeatletter
+%   \EUROFORMAT{main}{\align\in}
+%   \EUROFORMAT{in}{\val}
+%   \newcommand*\test[4]{\EUROFORMAT{EUR}{\zero{#1}{#2}{#3}}\EURO{EUR}{#4}}
+%   \def\|{\hspace{.1em}}
+%   \medskip\noindent
+%   \begin{center}
+%   \begin{tabular}{rr@{\hspace{1cm}}r@{\hspace{1cm}}r@{\hspace{1cm}}}%
+%                    & \texttt{0\rlap{.0}} & \texttt{0\rlap{.3}} & \texttt{3\rlap{.0}}\\[.5ex]
+%   \hline\\[-1.5ex]
+%   |\zero{0}{0}{}|&  \test{0}{0}{}{0}& \test{0}{0}{}{0.3}& \test{0}{0}{}{3.0}\\
+%   |\zero{0}{0}{,00}|&  \test{0}{0}{,00}{0}& \test{0}{0}{,00}{0.3}& \test{0}{0}{,00}{3.0}\\
+%   |\zero{0}{}{}|&  \test{0}{}{}{0}& \test{0}{}{}{0.3}& \test{0}{}{}{3.0}\\
+%   |\zero{---\EURO@align{,---}}{---}{,---}|&
+%     \quad\test{---\EURO@align{,---}}{---}{,---}{0}&
+%     \test{---\EURO@align{,---}}{---}{,---}{0.3}&
+%     \test{---\EURO@align{,---}}{---}{,---}{3.0}\\
+%   |\zero{0}{---}{,---}|&
+%     \test{0}{---}{,---}{0}&
+%     \test{0}{---}{,---}{0.3}&
+%     \test{0}{---}{,---}{3.0}\\
+%   \end{tabular}
+%   \end{center}}
+%
+% \bigskip\noindent
+% The |\EURO@align| command will get replaced by |\rlap| if alignment was requested.
+% You only have to state it in the first argument, if you want to align zero
+% amounts in tables.
+%
+%
+%
+%
+% \subsubsection{The \texttt{\char`\\plus} and \texttt{\char`\\minus} commands}
+%
+% The \DescribeMacro{\plus}|\plus| and |\minus| commands allow to
+% define a preamble\slash postamble for positive and negative numbers, respectively.
+% \DescribeMacro{\minus}^^A
+%
+% \begin{syntax}
+% |\plus{|\<positive preamble>|}{|\<positive postamble>|}|\\
+% |\minus{|\<negative preamble>|}{|\<negative postamble>|}|
+% \end{syntax}
+%
+% While |\plus| isn't used by default, |\minus| is defined to provide a preceding
+% minus sign for negative numbers.
+%
+%   {\EUROFORMAT{main}{\align\in\hspace*{10mm}}
+%   \EUROFORMAT{in}{\val}
+%   \newcommand*\test[3]{\EUROFORMAT{EUR}{\minus{#1}{#2}}\EURO{EUR}{#3}}
+%   \medskip\noindent
+%   \begin{center}
+%   \begin{tabular}{rrr}%
+%                    &  positive numbers         & negative numbers\\[.5ex]
+%   \hline\\[-1.5ex]
+%   |\minus{\(-\)}{}|&  \test{\(-\)}{}{12000}& \test{\(-\)}{}{-12000}\\
+%   |\minus{(}{)}|&     \test{(}{)}{.79}&      \test{(}{)}{-.79}\\
+%   |\minus{\color{red}(}{)}|&^^A
+%     \test{\color{red}(}{)}{123.456}&^^A
+%     \test{\color{red}(}{)}{-123.456}\\^^A
+%   |\minus{\color{red}\(-\)}{}|\qquad&^^A
+%     \test{\color{red}\(-\)}{}{10}&^^A
+%     \test{\color{red}\(-\)}{}{-10}^^A
+%   \end{tabular}
+%   \end{center}}
+%
+%
+%
+%
+%
+% \subsection{Tables and alignment}
+% \label{sec:align}
+%
+% To achieve proper alignment in tables there's an |\align| command that
+% can be used in any of the different format strings no matter if it's a
+% \emph{main}, an \emph{in}, \emph{out}, or one of the \emph{number} formats.
+% This command is to be stated before the
+% concerned |\in|, |\out|, or |\val| command, respectively.
+% It lets a number's fractional part have
+% no width, thus allowing to align such numbers properly in a flush-right
+% table column (|r| column). The example below also shows how to use
+% the \DescribeMacro{\table}|\table| keyword. It turns the \opt{table}
+% mode on for the current table. To turn it on for the whole document,
+% use the \opt{table} package option. If you find the `---' dashes
+% too long, you can load the package with the \DescribeOption{endash}\opt{endash}
+% option.
+%
+%
+% \medskip
+% \newcommand*\ALNUM{\EUROFORMAT{main}{\table\in}\EUROFORMAT{in}{\align\val}\EURO{EUR}}
+% \begin{tabular}{lr}
+% |\newcommand*\ALNUM{%|\\
+% |  \EUROFORMAT{main}{\table\in}%    % no \out currency|\hspace*{-2cm}\\
+% |  \EUROFORMAT{in}{\align\val}%     % no symbol/ISO code|\hspace*{-10cm}\\
+% |  \EURO{EUR}}%|\\[2ex]
+% |\begin{tabular}{r}|&\\
+% |\textbf{costs}\\|&     \textbf{costs}\\
+% |\ALNUM{123456}\\|&     \ALNUM{123456}\\
+% |\ALNUM{1234.56}\\|&    \ALNUM{1234.56}\\
+% |\ALNUM{12.3456}\\|&    \ALNUM{12.3456}\\
+% |\ALNUM{0.123456}|&     \ALNUM{0.123456}\\
+% |\end{tabular}|
+% \end{tabular}
+%
+% \medskip\noindent
+% It may be necessary to put a |\hspace| after such an aligned number,
+% especially when it is applied more than once. The second column would
+% have to be |\llap|ped in this case.
+%
+% \medskip
+% \newcommand*\IEP{^^A
+%   \EUROFORMAT{main}{\align\in\hspace{1.8cm}\llap{\align\out}}^^A
+%   \EUROFORMAT{in}{\val}^^A
+%   \EUROFORMAT{out}{\val}^^A
+%   \EURO{IEP}}
+% \begin{example}[.9\textwidth]
+% |\newcommand*\IEP{%|\\
+% |  \EUROFORMAT{main}{\align\in\hspace{1.8cm}\llap{\align\out}}%|\hspace*{-1cm}\\
+% |  \EUROFORMAT{in}{\val}%|\\
+% |  \EUROFORMAT{out}{\val}%|\\
+% |  \EURO{IEP}}|
+% \end{example}
+% \null
+%
+% \begin{tabular}{llr}
+% |\begin{tabular}{lr}|&\\
+% |\bf Month& \bf Irish Pound/Euro\\|& \bf Month& \bf Irish Pound/Euro\\
+% |January&   \IEP{6070.83}\\|&   January&  \IEP{6070.83}\\
+% |February&  \IEP{1200}\\|&      February& \IEP{1200}\\
+% |March&     \IEP{0.123}\\|&     March&    \IEP{0.123}\\
+% |April&     \IEP{441.0358}|&    April&    \IEP{441.0358}\\
+% |\end{tabular}|
+% \end{tabular}
+%
+% \medskip\noindent
+% It would have been much simpler, though, not to combine two
+% columns in one |\EURO| command, but to use two separate entries.
+% \medskip
+%
+%
+%
+%
+% \subsection{Dirty tricks}
+%
+%
+% Of course, the format doesn't have to deal with the \euro, nor with monetary amounts
+% at all. (The |EUR| currency in the following examples has no meaning,
+% we could also have used any other currency, provided that no |\out| command
+% is used within the \emph{format string.})
+%
+% \begin{example}[.6\textwidth]
+% |\newcommand*\USD[1]{{%|\\
+% |  \EUROFORMAT{main}{\in}%|\\
+% |  \EUROFORMAT{in}{\val\,\$}%|\\
+% |  \EUROFORMAT{EUR}{\form{,}{.}{,}\round{-2}}%|\hspace*{-1cm}\\
+% |  \EURO{EUR}{#1}}}|\\[1.5ex]
+% |\USD{-123450.6789}|& \USD{-123450.6789}\\[1ex]
+% \end{example}
+%
+% These examples are probably too complicated for the simple things they do.
+% But they may serve as examples of how to use some of the customization
+% commands.
+%
+% \begin{example}[.6\textwidth]
+% |\newcommand*\NUM[1]{{%|\\
+% |  \EUROFORMAT{main}{\in}%|\\
+% |  \EUROFORMAT{in}{\val}%|\\
+% |  \EUROFORMAT{EUR}{\form{,}{.}{,}\round{-10}}%|\hspace*{-1cm}\\
+% |  \EURO{EUR}{#1}}}|\\[1.5ex]
+% |\NUM{1000} red ants|& \NUM{1000} red ants
+% \end{example}
+% \null
+%
+%
+%
+% \subsection{The default settings}
+%
+% The following lines show how the |\EURO| command's default behavior
+% could have been defined. The real settings, however, were defined on
+% a lower programming level.
+%
+% \begin{example}[.6\textwidth]
+% |\EUROFORMAT{main}{\in\ (\out)}|\\
+% |\EUROFORMAT{in}{\val~\sym}|\\
+% |\EUROFORMAT{out}{\val~\sym}|\\
+% |\EUROFORMAT{all}{%|\\
+% |  \form{\,}{,}{\,}%|\\
+% |  \round{-2}%|\\
+% |  \zero{0}{0}{}%|\\
+% |  \plus{}{}%|\\
+% |  \minus{\(-\)}{}}|\\
+% |\EUROFORMAT{ITL}{%|\\
+% |  \round{0}}|
+% \end{example}
+% \null
+%
+%
+%
+% \subsection{The configuration file}
+% \label{sec:config}
+%
+% If you want to change the predefined settings, create a
+% file named `|euro.cfg|' and put it in a directory, where \TeX\
+% can find it. This configuration file will then be loaded
+% at the end of the |euro.sty| file, so you may redefine
+% any settings or commands, select package options and even
+% introduce new package options. But if you intend to give
+% your documents to others, don't forget to give them the
+% required configuration files, too! That's how such a file
+%  could look like:
+%
+% \begin{example}[.92\textwidth]
+% |% introduce the US-Dollar and the British Pound Sterling|\\
+% |\EUROADD{USD}{\$}{1.0891}|\\
+% |\EUROADD{GBP}{\textsterling}{0.6694}|
+% \end{example}
+%
+% \indent
+% \begin{example}[.85\textwidth]
+% |% let Italian Lire be rounded to 10s|\\
+% |\EUROFORMAT{ITL}{\round{1}}|\\
+% |% and let their symbol be only `L.'|\\
+% |\EUROSYM{ITL}{L.}|
+% \end{example}
+%
+% \indent
+% \begin{example}[.92\textwidth]
+% |% declare a new package option `bold',|\\
+% |% which typesets the source currency in boldface type|\\
+% |\DeclareOption{bold}{%|\\
+% |  \EUROFORMAT{main}{\textbf{\in} (\out)}}|
+% \end{example}
+%
+% \indent
+% \begin{example}[.85\textwidth]
+% |% always select the `endash' option|\\
+% |\ExecuteOptions{endash}|\\
+% |\endinput|
+% \end{example}
+% \null
+%
+%
+%
+%
+% \section*{The European Union \&\ Patents on Software}
+%
+%^^A^^  NOTE TO DISTRIBUTORS: If you feel like distributing the euro package documentation with
+%^^A^^  this section removed or modified, note the special copyright clause that applies in this case!
+%
+% Because this package is dedicated to the European Union's official currency,
+% I feel the obligation --~in the name of freedom and democracy, and as a citizen
+% of the EU~-- to comment on today's decision on the ``Computer Implemented
+% Inventions Directive'':
+%
+% Today, 2005/03/07, unelected bureaucrats --~the European Council of ministers~-- decided
+% to ignore the objections and clear will of the elected European Parliament, those of the
+% Committee on Legal Affairs~(JURI), the presidency of the European Parliament, of several
+% national parliaments, and nothing less than the interests of the citizens of the European Union.
+% Instead, they chose to fulfill the wishes of software industry giants (some of which have
+% been convicted of abusing their monopoly power in several countries), and the wishes of
+% bureaucrats from the European Patent Office, which has illegally granted 30.000~software
+% patents already.
+%
+% This is an incredible offense and disgusting abuse of power. It has yet to be
+% investigated, which r\^ole corruption played in this plot, for which there
+% seem to be strong signs. We are facing nothing less than an oligarchy of
+% unelected bureaucrats who feel more obliged to maintaining the wealth of the richest
+% man on earth, than the interests of the European citizens and the European
+% economy. There is still hope that the European Parliament will reject the
+% directive in the second reading. This appeal will remain in the documentation, though,
+% as long as the European Parliament is treated as a fig leaf for undemocratic decisions.
+% And should this directive become effective, and should I ever encounter conflicts
+% with software patent claims in \emph{any} of my software packages, the |euro|~package
+% will be the first that I will withdraw.
+%
+% This is a sad day. Shame on the European~Council! Shame on the European~Commission!
+%
+%
+%
+%
+%
+% \begin{thebibliography}{0}
+% \bibitem{Duden}{Duden, Volume 1: \textit{Die Rechtschreibung.} Bibliographisches Institut,
+%   Mann\-heim--Wien--Z\"urich, 1986, 19th~edition.}
+%
+% \bibitem{EUrates}{European Council: \textit{Council Regulation (EC) No.~2866/98 of 31~December~1998
+%   on the conversion rates between the euro and the currencies of the Member States adopting
+%   the euro.} Official Journal L~359. 31~December~1998.}
+%
+% \bibitem{EUratesGRD}{European Council: \textit{Council Regulation (EC) No.~1478/2000 of 19~June 2000
+%   amending Regulation (EC) No.~2866/98 on the conversion rates between the euro and the currencies
+%   of the Member States adopting the euro.} Official Journal L~167. 7~July~2000.}
+%
+% \bibitem{EUround}{European Council: \textit{Certain provisions related to the introduction of the
+%   Euro.} Council Regulation 1103/97, 17~June~1997.}
+%
+% \bibitem{DEK}{\textsc{Knuth, Donald Ervin:} \textit{The \TeX book.}
+%   Addison--Wesley Publishing Company, Reading/Massachusetts, 1989, 16th~edition.}
+%
+% \bibitem{Tschichold}{\textsc{Tschichold, Jan:} \textit{Ausgew\"ahlte Aufs\"atze
+%   \"uber Fragen der Gestalt des Buches und der Typographie.}
+%   Birkh\"auser, Basel, 1987, 2nd~edition.}
+% \end{thebibliography}
+%
+%
+%
+% \StopEventually{\addtocontents{toc}{\protect\end{multicols}}}
+%
+%
+%
+%
+%
+%
+%
+%
+%^^A max 72 columns
+%^^A--------------------------------------------------------------------
+%
+%
+%
+%
+% \section{The implementation}
+%    \begin{macrocode}
+%<*package>
+\NeedsTeXFormat{LaTeX2e}
+\ProvidesPackage{euro}[2003/02/19 v1.1 euro  (mf)]
+\RequirePackage{fp-basic}
+\RequirePackage{fp-snap}
+\FPmessagesfalse
+%    \end{macrocode}
+%
+%
+%
+%
+%^^A--------------------------------------------------------------------
+%
+%
+%
+%
+% \subsection{The engine}
+%
+% \begin{macro}{\EURO@zero}
+% \begin{macro}{\EURO@lzero}
+% \begin{macro}{\EURO@rzero}
+% \begin{macro}{\EURO@lminus}
+% \begin{macro}{\EURO@rminus}
+% \begin{macro}{\EURO@lplus}
+% \begin{macro}{\EURO@rplus}
+% \begin{macro}{\EURO@align}
+% \begin{macro}{\EURO@lsep}
+% \begin{macro}{\EURO@lsep}
+% \begin{macro}{\EURO@point}
+% \begin{macro}{\EURO@round}
+% These macros are for internal use only. They partly predefine the
+% format strings. Never change them here, but create a `|euro.cfg|'
+% file, where you can redefine them without causing undesirable
+% side effects.
+%
+%    \begin{macrocode}
+\newcommand*\EURO@zero{0}
+\newcommand*\EURO@lzero{0}
+\newcommand*\EURO@rzero{}
+\newcommand*\EURO@lminus{\(-\)}
+\newcommand*\EURO@rminus{}
+\newcommand*\EURO@lplus{}
+\newcommand*\EURO@rplus{}
+\newcommand*\EURO@align{}
+\newcommand*\EURO@lsep{\,}
+\newcommand*\EURO@rsep{\,}
+\newcommand*\EURO@point{,}
+\newcommand*\EURO@round{-2}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+%
+%
+%
+%^^A--------------------------------------------------------------------
+%
+%
+%
+%
+% \begin{macro}{\EURO}
+% \begin{macro}{\EURO@@}
+% \begin{macro}{\EURO@scan}
+% These macros manage the whole package. All the \emph{format string}
+% macros (also called \emph{keywords}) are defined here locally.
+% Note the beautiful |####|s! \texttt{;-)}
+%
+%    \begin{macrocode}
+\newcommand*\EURO[1]{\bgroup\def\EURO@icurr{#1}\EURO@@}
+\newcommand*\EURO@@[2][EUR]{\FPset\EURO@ival{#2}%
+  \def\EURO@set##1##2##3##4##5{\FPset##5{##1}}%
+  \csname EURO@@\EURO@icurr\endcsname\EURO@ifac
+  \csname EURO@@#1\endcsname\EURO@ofac
+  \FPdiv\EURO@oval\EURO@ival\EURO@ifac
+  \FPmul\EURO@oval\EURO@oval\EURO@ofac
+  \def\EURO@set##1##2##3##4##5{\def##5{##4}}%
+  \EURO@@main\EURO@
+  \EURO@@all\EURO@dflt
+  \let\EURO@set\EURO@scan
+  \def\in{{\csname EURO@@\EURO@icurr\endcsname\EURO@ival
+    \def\EURO@set####1####2####3{}\EURO@@in}}%
+  \def\out{{\csname EURO@@#1\endcsname\EURO@oval
+    \def\EURO@set####1####2####3{}\EURO@@out}}%
+  \def\align{\def\EURO@align####1{\rlap{####1}\let\EURO@align\relax}}%
+  \let\table\EURO@table
+  \def\form##1##2##3{\def\EURO@lsep{##1}\def\EURO@rsep{##3}%
+    \def\EURO@point{##2}}%
+  \def\round##1{\def\EURO@round{##1}}%
+  \let\zero\EURO@setzero
+  \def\minus##1##2{\def\EURO@lminus{##1}\def\EURO@rminus{##2}}%
+  \def\plus##1##2{\def\EURO@lplus{##1}\def\EURO@rplus{##2}}%
+  \EURO@\egroup}
+\newcommand*\EURO@scan[5]{%
+  \def\val{\FPifzero#5\EURO@zero\else\EURO@num#5\fi}%
+  \def\iso{#2}\def\sym{#3}\def\EURO@form{\EURO@dflt#4}%
+  \ifx\EURO@form\empty\let\EURO@form\EURO@dflt\fi
+  \EURO@form}%
+\newcommand*\EURO@setzero[3]{\def\EURO@zero{#1}%
+  \def\EURO@lzero{#2}\def\EURO@rzero{#3}}%
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+%
+%
+%
+%^^A--------------------------------------------------------------------
+%
+%
+%
+%
+% \begin{macro}{\EUROSYM}
+% \begin{macro}{\EUROFORMAT}
+% \begin{macro}{\EUROADD}
+% These macros replace the third\slash fourth parameter of the
+% respective currency entry with another currency code\slash
+% format string, or add a new currency entry.
+%
+%    \begin{macrocode}
+\newcommand*\EUROSYM[2]{%
+  \def\EURO@set##1##2##3##4{\toks@={\EURO@set{##1}{##2}{#2}{##4}}%
+    \expandafter\edef\csname EURO@@#1\endcsname{\the\toks@}}%
+  \csname EURO@@#1\endcsname}
+\newcommand*\EUROFORMAT[2]{%
+  \def\EURO@set##1##2##3##4{\toks@={\EURO@set{##1}{##2}{##3}{#2}}%
+    \expandafter\edef\csname EURO@@#1\endcsname{\the\toks@}}%
+  \csname EURO@@#1\endcsname}
+\newcommand*\EUROADD[3]{%
+  \expandafter\def\csname EURO@@#1\endcsname{\EURO@set{#3}{#1}{#2}{}}}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+%
+%
+%
+%^^A--------------------------------------------------------------------
+%
+%
+%
+%
+% \begin{macro}{\EURO@num}
+% \begin{macro}{\EURO@split}
+% Takes a macro containing a number, passes the integer part to |\EURO@grp| and
+% outputs everything else, cares about rounding and such\dots
+%
+%    \begin{macrocode}
+\newcommand*\EURO@num[1]{{%
+  \FPifneg#1%
+    \EURO@lminus\let\EURO@post\EURO@rminus\FPneg#1#1%
+  \else
+    \EURO@lplus\let\EURO@post\EURO@rplus
+  \fi
+  \EURO@rround#1%
+  \let\EURO@aux#1%
+  \FPtrunc#1#10%
+  \FPifzero#1\EURO@lzero\else\EURO@grp#1\fi
+  \EURO@align{%
+     \FPsub\EURO@aux\EURO@aux#1%
+     \FPifzero\EURO@aux
+       \ifnum\EURO@round<0 \EURO@rzero\fi
+     \else
+       \ifnum\EURO@round<0
+         \ifnum\EURO@round<-9
+           \FPclip\EURO@aux\EURO@aux
+         \else
+           \FPtrunc\EURO@aux\EURO@aux{-\EURO@round}%
+         \fi
+         \EURO@point
+         \expandafter\EURO@split\EURO@aux\relax\relax\relax\EURO@
+       \fi
+     \fi
+     \EURO@post}}%
+  \let\EURO@align\relax}
+\newcommand*\EURO@split{}
+\def\EURO@split0.#1#2#3#4\EURO@{#1#2#3%
+  \EURO@threedig#4\relax\relax\relax\EURO@}
+\newcommand*\EURO@threedig[3]{%
+  \if#1\relax
+    \let\EURO@\relax
+  \else
+    \EURO@rsep#1#2#3\let\EURO@\EURO@threedig
+  \fi\EURO@}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+%
+%
+%
+%^^A--------------------------------------------------------------------
+%
+%
+%
+%
+% \begin{macro}{\EURO@rround}
+% \begin{macro}{\EURO@rfac}
+% Takes a macro containing a number, returns it rounded.
+% |\EURO@rfac| calculates the rounding factor \(10^r\)
+% for positive \(r\) (\emph{rounding number}).
+%
+%    \begin{macrocode}
+\newcommand*\EURO@rround[1]{%
+  \count@=\EURO@round\relax
+  \ifnum\count@<1%
+    \count@-\count@
+    \FPround#1#1\count@
+  \else
+    \FPset\EURO@aux1%
+    \EURO@rfac\EURO@aux\count@
+    \FPdiv#1#1\EURO@aux
+    \FPround#1#10%
+    \FPmul#1#1\EURO@aux
+  \fi}
+\newcommand*\EURO@rfac[2]{%
+  \ifnum#2>0 \advance#2-1 \EURO@rfac#1#2\FPmul#1#1{10}\fi}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+%
+%
+%
+%^^A--------------------------------------------------------------------
+%
+%
+%
+%
+% \begin{macro}{\EURO@grp}
+% Let's do some recursion---it's fun! (This macro does the three-digit grouping.)
+%
+%    \begin{macrocode}
+\newcommand*\EURO@grp[1]{\bgroup%
+  \FPtrunc#1#10%
+  \FPiflt#1{1000}%
+    #1%
+  \else
+    \let\EURO@aux=#1%
+    \FPdiv#1#1{1000}%
+    \FPtrunc#1#10%
+    \EURO@grp#1%
+    \FPmul#1#1{1000}%
+    \FPsub\EURO@aux\EURO@aux#1%
+    \FPtrunc\EURO@aux\EURO@aux0%
+    \count0=\EURO@aux\relax
+    \EURO@lsep
+    \ifnum\count0<100 0\ifnum\count0<10 0\fi\fi\EURO@aux
+  \fi\egroup}
+%    \end{macrocode}
+% \end{macro}
+%
+%
+%
+%
+%^^A--------------------------------------------------------------------
+%
+%
+%
+%
+% \subsection{The facts}
+%
+% \begin{macro}{\EURO@@ATS}
+% \begin{macro}{\EURO@@BEF}
+% \begin{macro}{\EURO@@DEM}
+% \begin{macro}{\EURO@@ESP}
+% \begin{macro}{\EURO@@FIM}
+% \begin{macro}{\EURO@@FRF}
+% \begin{macro}{\EURO@@GRD}
+% \begin{macro}{\EURO@@IEP}
+% \begin{macro}{\EURO@@ITL}
+% \begin{macro}{\EURO@@LUF}
+% \begin{macro}{\EURO@@NLG}
+% \begin{macro}{\EURO@@PTE}
+% \begin{macro}{\EURO@@EUR}
+% These values have been irrevocably fixed by the European Council on suggestion
+% by the European Commission and been published in the \emph{Council Regulation (EC) No.~2866/98}
+% \cite{EUrates} and \emph{No.~1478/2000} \cite{EUratesGRD}
+% (taken from |http://europa.eu.int/|).
+%
+%    \begin{macrocode}
+\newcommand*\EURO@@ATS{\EURO@set{13.7603}{ATS}{\"oS}{}}
+\newcommand*\EURO@@BEF{\EURO@set{40.3399}{BEF}{BEF}{}}
+\newcommand*\EURO@@DEM{\EURO@set{1.95583}{DEM}{DM}{}}
+\newcommand*\EURO@@ESP{\EURO@set{166.386}{ESP}{Pt.}{}}
+\newcommand*\EURO@@FIM{\EURO@set{5.94573}{FIM}{FIM}{}}
+\newcommand*\EURO@@FRF{\EURO@set{6.55957}{FRF}{FRF}{}}
+\newcommand*\EURO@@GRD{\EURO@set{340.750}{GRD}{GRD}{}}
+\newcommand*\EURO@@IEP{\EURO@set{.787564}{IEP}{IEP}{}}
+\newcommand*\EURO@@ITL{\EURO@set{1936.27}{ITL}{Lit.}{}}
+\newcommand*\EURO@@LUF{\EURO@set{40.3399}{LUF}{LUF}{}}
+\newcommand*\EURO@@NLG{\EURO@set{2.20371}{NLG}{NLG}{}}
+\newcommand*\EURO@@PTE{\EURO@set{200.482}{PTE}{PTE}{}}
+\newcommand*\EURO@@EUR{\EURO@set{1.00000}{EUR}{Euro}{}}
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+%
+%
+%
+%^^A--------------------------------------------------------------------
+%
+%
+%
+%
+% \begin{macro}{\EURO@@main}
+% \begin{macro}{\EURO@@in}
+% \begin{macro}{\EURO@@out}
+% \begin{macro}{\EURO@@all}
+% Define the generic format macros and `fill' them with
+% some default settings. Define the number format for
+% the \emph{Italian Lira} and the package options,
+% load the optional `|euro.cfg|' file and, finally:
+% Exit.
+%
+%
+%    \begin{macrocode}
+\newcommand*\EURO@@main{\EURO@set0{}{}{}}
+\newcommand*\EURO@@in{\EURO@set0{}{}{}}
+\newcommand*\EURO@@out{\EURO@set0{}{}{}}
+\newcommand*\EURO@@all{\EURO@set0{}{}{}}
+\EUROFORMAT{main}{\in\ (\out)}
+\EUROFORMAT{in}{\val~\sym}
+\EUROFORMAT{out}{\val~\sym}
+\EUROFORMAT{ITL}{\round0}
+\DeclareOption{eco}%
+  {\EUROFORMAT{in}{\iso~\val}%
+   \EUROFORMAT{out}{\iso~\val}}
+\newcommand*\EURO@emdash{\EURO@setzero
+  {0}{---}{\EURO@point---}}
+\newcommand*\EURO@endash{\EURO@setzero
+  {0}{--\kern.1em}{\EURO@point\kern.1em--}}
+\newcommand*\EURO@zeros{\EURO@setzero
+  {0\EURO@align{\EURO@point00}}{0}{\EURO@point00}}
+\DeclareOption{emdash}{\let\EURO@table\EURO@emdash}
+\DeclareOption{endash}{\let\EURO@table\EURO@endash}
+\DeclareOption{zeros}{\let\EURO@table\EURO@zeros}
+\DeclareOption{table}{\EURO@table}
+\DeclareOption{dots}{\let\EURO@lsep.\let\EURO@rsep.}
+\ExecuteOptions{emdash}
+\InputIfFileExists{euro.cfg}%
+  {\PackageInfo{euro}{Local config file euro.cfg used}}{}
+\ProcessOptions
+\endinput
+%</package>
+%    \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+%
+%
+%
+%^^A--------------------------------------------------------------------
+%
+%
+%
+%
+% \vspace{2explus1fill}
+%\begin{verbatim}
+%$Id: euro.dtx,v 1.14 2005/03/07 14:22:19 m Exp $
+%\end{verbatim}
+% \Finale
+%
+%
+%
+%                                                       ^^A.E.I.O.U.^^
+% ^^A vim:ts=4:sw=4:et:cindent
diff --git a/Master/texmf-dist/source/latex/euro/euro.ins b/Master/texmf-dist/source/latex/euro/euro.ins
new file mode 100644
index 00000000000..42a651cb745
--- /dev/null
+++ b/Master/texmf-dist/source/latex/euro/euro.ins
@@ -0,0 +1,10 @@
+%% LaTeX2e file `euro.ins'
+%% generated by the `filecontents' environment
+%% from source `euro' on 2005/03/07.
+%%
+\def\batchfile{euro.ins}
+\input docstrip.tex
+\askforoverwritefalse
+\keepsilent
+\generate{\file{euro.sty}{\from{euro.dtx}{package}}}
+\endbatchfile