path: root/support/latexindent/documentation/sec-the-m-switch.tex

% arara: pdflatex: {shell: yes, files: [latexindent]}
\renewcommand{\imagetouse}{logo}
\section{The -m (modifylinebreaks) switch}\label{sec:modifylinebreaks}
 \fancyhead[R]{\bfseries\thepage%
	 \tikz[remember picture,overlay] {
		 \node at (1,0){\includegraphics{logo}};
	 }}
 All features described in this section will only be relevant if the
 \texttt{-m} switch is used.

 \startcontents[the-m-switch]
 \printcontents[the-m-switch]{}{0}{}

\yamltitle{modifylinebreaks}*{fields}
	\begin{wrapfigure}[7]{r}[0pt]{8cm}
		\cmhlistingsfromfile[style=modifylinebreaks]*{../defaultSettings.yaml}[MLB-TCB,width=.85\linewidth,before=\centering]{\texttt{modifyLineBreaks}}{lst:modifylinebreaks}
	\end{wrapfigure}
	\makebox[0pt][r]{%
		\raisebox{-\totalheight}[0pt][0pt]{%
			\tikz\node[opacity=1] at (0,0) {\includegraphics[width=4cm]{logo}};}}%	
	As of Version 3.0, \texttt{latexindent.pl} has the \texttt{-m}
	switch, which permits \texttt{latexindent.pl} to modify line breaks, according to the
	specifications in the \texttt{modifyLineBreaks} field. \emph{The settings
		in this field will only be considered if the \texttt{-m} switch has been used}. A
	snippet of the default settings of this field is shown in \cref{lst:modifylinebreaks}.

	Having read the previous paragraph, it should sound reasonable that, if you call
	\texttt{latexindent.pl} using the \texttt{-m} switch, then you give
	it permission to modify line breaks in your file, but let's be clear:

	\begin{warning}
		If you call \texttt{latexindent.pl} with the \texttt{-m} switch, then you
		are giving it permission to modify line breaks. By default, the only
		thing that will happen is that multiple blank lines will be condensed into
		one blank line; many other settings are possible, discussed next.
	\end{warning}

\yamltitle{preserveBlankLines}{0|1}
	This field is directly related to \emph{poly-switches}, discussed below. By
	default, it is set to \texttt{1}, which means that blank lines will be
	protected from removal; however, regardless of this setting, multiple blank lines can be
	condensed if \texttt{condenseMultipleBlankLinesInto} is greater than \texttt{0},
	discussed next.

\yamltitle{condenseMultipleBlankLinesInto}*{positive integer}
	Assuming that this switch takes an integer value greater than
	\texttt{0}, \texttt{latexindent.pl} will condense multiple blank
	lines into the number of blank lines illustrated by this switch. As an example,
	\cref{lst:mlb-bl} shows a sample file with blank lines; upon running
	\begin{commandshell}
latexindent.pl myfile.tex -m  
\end{commandshell}
	the output is shown in \cref{lst:mlb-bl-out}; note that the multiple blank lines
	have been condensed into one blank line, and note also that we have used the
	\texttt{-m} switch!

	\begin{minipage}{.45\textwidth}
		\cmhlistingsfromfile{demonstrations/mlb1.tex}{\texttt{mlb1.tex}}{lst:mlb-bl}
	\end{minipage}%
	\hfill
	\begin{minipage}{.45\textwidth}
		\cmhlistingsfromfile{demonstrations/mlb1-out.tex}{\texttt{mlb1.tex} out output}{lst:mlb-bl-out}
	\end{minipage}

\subsection{textWrapOptions: modifying line breaks by text wrapping}\label{subsec:textwrapping}
	When the \texttt{-m} switch is active \texttt{latexindent.pl} has the
	ability to wrap text using the options%
	\announce{2017-05-27}{textWrapOptions} specified in the \texttt{textWrapOptions} field, see
	\cref{lst:textWrapOptions}. The value of \texttt{columns} specifies the
	column at which the text should be wrapped. By default, the value of
	\texttt{columns} is \texttt{0}, so
	\texttt{latexindent.pl} will \emph{not} wrap text; if you change it
	to a value of \texttt{2} or more, then text will be wrapped after the
	character in the specified column.

	\cmhlistingsfromfile[style=textWrapOptions]*{../defaultSettings.yaml}[MLB-TCB,width=.85\linewidth,before=\centering]{\texttt{textWrapOptions}}{lst:textWrapOptions}

	For example, consider the file give in \cref{lst:textwrap1}.

	\begin{widepage}
		\cmhlistingsfromfile{demonstrations/textwrap1.tex}{\texttt{textwrap1.tex}}{lst:textwrap1}
	\end{widepage}

	Using the file \texttt{textwrap1.yaml} in \cref{lst:textwrap1-yaml}, and running
	the command
	\begin{commandshell}
latexindent.pl -m textwrap1.tex -o textwrap1-mod1.tex -l textwrap1.yaml
\end{commandshell}
	we obtain the output in \cref{lst:textwrap1-mod1}.

	\begin{cmhtcbraster}[raster column skip=.1\linewidth]
		\cmhlistingsfromfile{demonstrations/textwrap1-mod1.tex}{\texttt{textwrap1-mod1.tex}}{lst:textwrap1-mod1}
		\cmhlistingsfromfile{demonstrations/textwrap1.yaml}[MLB-TCB]{\texttt{textwrap1.yaml}}{lst:textwrap1-yaml}
	\end{cmhtcbraster}

	The text wrapping routine is performed \emph{after} verbatim environments
	have been stored, so verbatim environments and verbatim commands are exempt from the
	routine. For example, using the file in \cref{lst:textwrap2},
	\begin{widepage}
		\cmhlistingsfromfile{demonstrations/textwrap2.tex}{\texttt{textwrap2.tex}}{lst:textwrap2}
	\end{widepage}
	and running the following command and continuing to use \texttt{textwrap1.yaml} from
	\cref{lst:textwrap1-yaml},
	\begin{commandshell}
latexindent.pl -m textwrap2.tex -o textwrap2-mod1.tex -l textwrap1.yaml
\end{commandshell}
	then the output is as in \cref{lst:textwrap2-mod1}.
	\begin{widepage}
		\cmhlistingsfromfile{demonstrations/textwrap2-mod1.tex}{\texttt{textwrap2-mod1.tex}}{lst:textwrap2-mod1}
	\end{widepage}
	Furthermore, the text wrapping routine is performed after the trailing comments have been
	stored, and they are also exempt from text wrapping. For example, using the file in
	\cref{lst:textwrap3}
	\begin{widepage}
		\cmhlistingsfromfile{demonstrations/textwrap3.tex}{\texttt{textwrap3.tex}}{lst:textwrap3}
	\end{widepage}
	and running the following command and continuing to use \texttt{textwrap1.yaml} from
	\cref{lst:textwrap1-yaml},
	\begin{commandshell}
latexindent.pl -m textwrap3.tex -o textwrap3-mod1.tex -l textwrap1.yaml
\end{commandshell}
	then the output is as in \cref{lst:textwrap3-mod1}.

	\cmhlistingsfromfile{demonstrations/textwrap3-mod1.tex}{\texttt{textwrap3-mod1.tex}}{lst:textwrap3-mod1}

	The text wrapping routine of \texttt{latexindent.pl} is performed by the
	\texttt{Text::Wrap} module, which provides a \texttt{separator} feature
	to separate lines with characters other than a new line (see
	\cite{textwrap}). By default, the separator is empty which means that a new
	line token will be used, but you can change it as you see fit.

	For example starting with the file in \cref{lst:textwrap4}

	\cmhlistingsfromfile{demonstrations/textwrap4.tex}{\texttt{textwrap4.tex}}{lst:textwrap4}
	and using \texttt{textwrap2.yaml} from \cref{lst:textwrap2-yaml} with the following
	command
	\begin{commandshell}
latexindent.pl -m textwrap4.tex -o textwrap4-mod2.tex -l textwrap2.yaml
\end{commandshell}
	then we obtain the output in \cref{lst:textwrap4-mod2}.

	\begin{cmhtcbraster}[raster column skip=.1\linewidth]
		\cmhlistingsfromfile{demonstrations/textwrap4-mod2.tex}{\texttt{textwrap4-mod2.tex}}{lst:textwrap4-mod2}
		\cmhlistingsfromfile{demonstrations/textwrap2.yaml}[MLB-TCB]{\texttt{textwrap2.yaml}}{lst:textwrap2-yaml}
	\end{cmhtcbraster}

	There are options to specify the \texttt{huge} option for the
	\texttt{Text::Wrap} module \cite{textwrap}
	\announce{2019-09-07}{huge option for text wrap module}. This can be helpful if you would like to forbid the
	\texttt{Text::Wrap} routine from breaking words. For example, using the settings
	in \cref{lst:textwrap2A-yaml,lst:textwrap2B-yaml} and running the commands
	\begin{commandshell}
latexindent.pl -m textwrap4.tex -o=+-mod2A -l textwrap2A.yaml
latexindent.pl -m textwrap4.tex -o=+-mod2B -l textwrap2B.yaml
\end{commandshell}
	gives the respective output in \cref{lst:textwrap4-mod2A,lst:textwrap4-mod2B}. You can also specify
	\texttt{break} in your settings, but I haven't found a useful reason to do
	this; see \cite{textwrap} for more details.

	\begin{cmhtcbraster}[raster column skip=.1\linewidth]
		\cmhlistingsfromfile{demonstrations/textwrap4-mod2A.tex}{\texttt{textwrap4-mod2A.tex}}{lst:textwrap4-mod2A}
		\cmhlistingsfromfile{demonstrations/textwrap2A.yaml}[MLB-TCB]{\texttt{textwrap2A.yaml}}{lst:textwrap2A-yaml}

		\cmhlistingsfromfile{demonstrations/textwrap4-mod2B.tex}{\texttt{textwrap4-mod2B.tex}}{lst:textwrap4-mod2B}
		\cmhlistingsfromfile{demonstrations/textwrap2B.yaml}[MLB-TCB]{\texttt{textwrap2B.yaml}}{lst:textwrap2B-yaml}
	\end{cmhtcbraster}

\subsubsection{text wrapping on a per-code-block basis}
	By default, if the value of \texttt{columns} is greater than 0 and the
	\texttt{-m} switch is active, then%
	\announce{2018-08-13}*{updates to textWrapOptions} the text wrapping routine will operate before the code blocks
	have been searched for. This behaviour is customisable; in particular, you can instead
	instruct \texttt{latexindent.pl} to apply \texttt{textWrap} on a
	per-code-block basis. Thanks to \cite{zoehneto} for their help in testing and
	shaping this feature.

	The full details of \texttt{textWrapOptions} are shown in \cref{lst:textWrapOptionsAll}.
	In particular, note the field \texttt{perCodeBlockBasis: 0}.

	\cmhlistingsfromfile[style=textWrapOptionsAll]*{../defaultSettings.yaml}[MLB-TCB,width=.85\linewidth,before=\centering]{\texttt{textWrapOptions}}{lst:textWrapOptionsAll}

	The code blocks detailed in \cref{lst:textWrapOptionsAll} are with direct reference to
	those detailed in \vref{tab:code-blocks}. The only special case is the
	\texttt{masterDocument} field; this is designed for `chapter'-type files that may
	contain paragraphs that are not within any other code-blocks. The same notation is used
	between this feature and the \texttt{removeParagraphLineBreaks} described in
	\vref{lst:removeParagraphLineBreaks}; in fact, the two features can even be combined (this is
	detailed in \vref{subsec:removeparagraphlinebreaks:and:textwrap}).

	Let's explore these switches with reference to the code given in
	\cref{lst:textwrap5}; the text outside of the environment is considered part of
	the \texttt{masterDocument}.

	\begin{widepage}
		\cmhlistingsfromfile{demonstrations/textwrap5.tex}{\texttt{textwrap5.tex}}{lst:textwrap5}
	\end{widepage}

	With reference to this code block, the settings given in \cref{lst:textwrap3-yaml,lst:textwrap4-yaml,lst:textwrap5-yaml} each
	give the same output.

	\begin{cmhtcbraster}[raster columns=3,
			raster left skip=-3.5cm,
			raster right skip=-2cm,
			raster column skip=.03\linewidth]
		\cmhlistingsfromfile{demonstrations/textwrap3.yaml}[MLB-TCB]{\texttt{textwrap3.yaml}}{lst:textwrap3-yaml}
		\cmhlistingsfromfile{demonstrations/textwrap4.yaml}[MLB-TCB]{\texttt{textwrap4.yaml}}{lst:textwrap4-yaml}
		\cmhlistingsfromfile{demonstrations/textwrap5.yaml}[MLB-TCB]{\texttt{textwrap5.yaml}}{lst:textwrap5-yaml}
	\end{cmhtcbraster}

	Let's explore the similarities and differences in the equivalent (with respect to
	\cref{lst:textwrap5}) syntax specified in \cref{lst:textwrap3-yaml,lst:textwrap4-yaml,lst:textwrap5-yaml}:
	\begin{itemize}
		\item in each of \cref{lst:textwrap3-yaml,lst:textwrap4-yaml,lst:textwrap5-yaml} notice that \texttt{columns: 30};
		\item in each of \cref{lst:textwrap3-yaml,lst:textwrap4-yaml,lst:textwrap5-yaml} notice that \texttt{perCodeBlockBasis: 1};
		\item in \cref{lst:textwrap3-yaml} we have specified \texttt{all: 1} so that the
		      text wrapping will operate upon \emph{all} code blocks;
		\item in \cref{lst:textwrap4-yaml} we have \emph{not} specified
		      \texttt{all}, and instead, have specified that text wrapping should be
		      applied to each of \texttt{environments} and \texttt{masterDocument};
		\item in \cref{lst:textwrap5-yaml} we have specified text wrapping for
		      \texttt{masterDocument} and on a \emph{per-name} basis for
		      \texttt{environments} code blocks.
	\end{itemize}

	Upon running the following commands
	\begin{commandshell}
latexindent.pl -s textwrap5.tex -l=textwrap3.yaml -m
latexindent.pl -s textwrap5.tex -l=textwrap4.yaml -m
latexindent.pl -s textwrap5.tex -l=textwrap5.yaml -m
\end{commandshell}
	we obtain the output shown in \cref{lst:textwrap5-mod3}.

	\cmhlistingsfromfile{demonstrations/textwrap5-mod3.tex}{\texttt{textwrap5-mod3.tex}}{lst:textwrap5-mod3}

	We can explore the idea of per-name text wrapping given in \cref{lst:textwrap5-yaml} by
	using \cref{lst:textwrap6}.

	\begin{widepage}
		\cmhlistingsfromfile{demonstrations/textwrap6.tex}{\texttt{textwrap6.tex}}{lst:textwrap6}
	\end{widepage}

	In particular, upon running
	\begin{commandshell}
latexindent.pl -s textwrap6.tex -l=textwrap5.yaml -m
\end{commandshell}
	we obtain the output given in \cref{lst:textwrap6-mod5}.

	\begin{widepage}
		\cmhlistingsfromfile{demonstrations/textwrap6-mod5.tex}{\texttt{textwrap6.tex} using \cref{lst:textwrap5-yaml}}{lst:textwrap6-mod5}
	\end{widepage}

	Notice that, because \texttt{environments} has been specified only for
	\texttt{myenv} (in \cref{lst:textwrap5-yaml}) that the environment named \texttt{another} has
	\emph{not} had text wrapping applied to it.

	The {all} field can be specified with exceptions which can either
	be done on a per-code-block or per-name basis; we explore this in relation to
	\cref{lst:textwrap6} in the settings given in \crefrange{lst:textwrap6-yaml}{lst:textwrap8-yaml}.

	\begin{adjustwidth}{-3.5cm}{-2.5cm}
		\begin{minipage}{.33\linewidth}
			\cmhlistingsfromfile{demonstrations/textwrap6.yaml}[MLB-TCB]{\texttt{textwrap6.yaml}}{lst:textwrap6-yaml}
		\end{minipage}%
		\begin{minipage}{.33\linewidth}
			\cmhlistingsfromfile{demonstrations/textwrap7.yaml}[MLB-TCB]{\texttt{textwrap7.yaml}}{lst:textwrap7-yaml}
		\end{minipage}%
		\begin{minipage}{.33\linewidth}
			\cmhlistingsfromfile{demonstrations/textwrap8.yaml}[MLB-TCB]{\texttt{textwrap8.yaml}}{lst:textwrap8-yaml}
		\end{minipage}
	\end{adjustwidth}

	Upon running the commands
	\begin{commandshell}
latexindent.pl -s textwrap6.tex -l=textwrap6.yaml -m
latexindent.pl -s textwrap6.tex -l=textwrap7.yaml -m
latexindent.pl -s textwrap6.tex -l=textwrap8.yaml -m
\end{commandshell}
	we receive the respective output given in \crefrange{lst:textwrap6-mod6}{lst:textwrap6-mod8}.
	\begin{widepage}
		\cmhlistingsfromfile{demonstrations/textwrap6-mod6.tex}{\texttt{textwrap6.tex} using \cref{lst:textwrap6-yaml}}{lst:textwrap6-mod6}

		\cmhlistingsfromfile{demonstrations/textwrap6-mod7.tex}{\texttt{textwrap6.tex} using \cref{lst:textwrap7-yaml}}{lst:textwrap6-mod7}

		\cmhlistingsfromfile{demonstrations/textwrap6-mod8.tex}{\texttt{textwrap6.tex} using \cref{lst:textwrap8-yaml}}{lst:textwrap6-mod8}
	\end{widepage}

	Notice that:
	\begin{itemize}
		\item in \cref{lst:textwrap6-mod6} the text wrapping routine has not been applied to any
		      \texttt{environments} because it has been switched off (per-code-block) in
		      \cref{lst:textwrap6-yaml};
		\item in \cref{lst:textwrap6-mod7} the text wrapping routine has not been applied to
		      \texttt{myenv} because it has been switched off (per-name) in
		      \cref{lst:textwrap7-yaml};
		\item in \cref{lst:textwrap6-mod8} the text wrapping routine has not been applied to
		      \texttt{masterDocument} because of the settings in \cref{lst:textwrap8-yaml}.
	\end{itemize}

	The \texttt{columns} field has a variety of different ways that it can be
	specified; we've seen two basic ways already: the default (set to
	\texttt{0}) and a positive integer (see \vref{lst:textwrap6}, for
	example). We explore further options in \crefrange{lst:textwrap9-yaml}{lst:textwrap11-yaml}.

	\begin{cmhtcbraster}[raster columns=3,
			raster left skip=-3.5cm,
			raster right skip=-2cm,
			raster column skip=.03\linewidth]
		\cmhlistingsfromfile{demonstrations/textwrap9.yaml}[MLB-TCB]{\texttt{textwrap9.yaml}}{lst:textwrap9-yaml}
		\cmhlistingsfromfile{demonstrations/textwrap10.yaml}[MLB-TCB]{\texttt{textwrap10.yaml}}{lst:textwrap10-yaml}
		\cmhlistingsfromfile{demonstrations/textwrap11.yaml}[MLB-TCB]{\texttt{textwrap11.yaml}}{lst:textwrap11-yaml}
	\end{cmhtcbraster}

	\Cref{lst:textwrap9-yaml} and \cref{lst:textwrap10-yaml} are equivalent. Upon running
	the commands
	\begin{commandshell}
latexindent.pl -s textwrap6.tex -l=textwrap9.yaml -m
latexindent.pl -s textwrap6.tex -l=textwrap11.yaml -m
\end{commandshell}
	we receive the respective output given in \cref{lst:textwrap6-mod9,lst:textwrap6-mod11}.

	\begin{widepage}
		\cmhlistingsfromfile{demonstrations/textwrap6-mod9.tex}{\texttt{textwrap6.tex} using \cref{lst:textwrap9-yaml}}{lst:textwrap6-mod9}

		\cmhlistingsfromfile{demonstrations/textwrap6-mod11.tex}{\texttt{textwrap6.tex} using \cref{lst:textwrap11-yaml}}{lst:textwrap6-mod11}
	\end{widepage}

	Notice that:
	\begin{itemize}
		\item in \cref{lst:textwrap6-mod9} the text for the \texttt{masterDocument} has been
		      wrapped using \texttt{30} columns, while \texttt{environments} has
		      been wrapped using \texttt{50} columns;
		\item in \cref{lst:textwrap6-mod11} the text for \texttt{myenv} has been wrapped
		      using \texttt{50} columns, the text for \texttt{another} has
		      been wrapped using \texttt{15} columns, and \texttt{masterDocument}
		      has been wrapped using \texttt{30} columns.
	\end{itemize}
	If you don't specify a \texttt{default} value on per-code-block basis, then
	the \texttt{default} value from \texttt{columns} will be inherited;
	if you don't specify a default value for \texttt{columns} then
	\texttt{80} will be used.

	\texttt{alignAtAmpersandTakesPriority} is set to \texttt{1} by default; assuming
	that text wrapping is occurring on a per-code-block basis, and the current
	environment/code block is specified within \vref{lst:aligndelims:basic} then text wrapping
	will be disabled for this code block.

	If you wish to specify \texttt{afterHeading} commands (see
	\vref{lst:indentAfterHeadings}) on a per-name basis, then you need to append the name with
	\texttt{:heading}, for example, you might use \texttt{section:heading}.

\subsubsection{Summary of text wrapping}
	It is important to note the following:
	\begin{itemize}
		\item Verbatim environments (\vref{lst:verbatimEnvironments}) and verbatim commands
		      (\vref{lst:verbatimCommands}) will \emph{not} be affected by the text
		      wrapping routine (see \vref{lst:textwrap2-mod1});
		\item comments will \emph{not} be affected by the text wrapping routine (see
		      \vref{lst:textwrap3-mod1});
		\item it is possible to wrap text on a per-code-block and a per-name basis;
		      \announce{2018-08-13}*{updates to textWrapOptions}
		\item the text wrapping routine sets \texttt{preserveBlankLines} as
		      \texttt{1};
		\item indentation is performed \emph{after} the text wrapping routine; as such,
		      indented code will likely exceed any maximum value set in the \texttt{columns}
		      field.
	\end{itemize}

\subsection{oneSentencePerLine: modifying line breaks for sentences}\label{sec:onesentenceperline}
	You can instruct \texttt{latexindent.pl} to
	format%
	\announce{2018-01-13}{one sentence per line} your file so that
	it puts one sentence per line. Thank you to \cite{mlep} for helping to
	shape and test this feature. The behaviour of this part of the script is controlled by
	the switches detailed in \cref{lst:oneSentencePerLine}, all of which we discuss next.

	\cmhlistingsfromfile[style=oneSentencePerLine]*{../defaultSettings.yaml}[MLB-TCB,width=.85\linewidth,before=\centering]{\texttt{oneSentencePerLine}}{lst:oneSentencePerLine}

\yamltitle{manipulateSentences}{0|1}
	This is a binary switch that details if \texttt{latexindent.pl} should perform the
	sentence manipulation routine; it is \emph{off} (set to \texttt{0}) by default, and you will
	need to turn it on (by setting it to \texttt{1}) if you want the script
	to modify line breaks surrounding and within sentences.

\yamltitle{removeSentenceLineBreaks}{0|1}
	When operating upon sentences \texttt{latexindent.pl} will, by default, remove
	internal line breaks as \texttt{removeSentenceLineBreaks} is set to
	\texttt{1}. Setting this switch to \texttt{0} instructs
	\texttt{latexindent.pl} not to do so.

	For example, consider \texttt{multiple-sentences.tex} shown in \cref{lst:multiple-sentences}.

	\cmhlistingsfromfile{demonstrations/multiple-sentences.tex}{\texttt{multiple-sentences.tex}}{lst:multiple-sentences}

	If we use the YAML files in \cref{lst:manipulate-sentences-yaml,lst:keep-sen-line-breaks-yaml}, and run the commands
	\begin{widepage}
		\begin{commandshell}
latexindent.pl multiple-sentences -m -l=manipulate-sentences.yaml
latexindent.pl multiple-sentences -m -l=keep-sen-line-breaks.yaml
\end{commandshell}
	\end{widepage}
	then we obtain the respective output given in \cref{lst:multiple-sentences-mod1,lst:multiple-sentences-mod2}.

	\begin{cmhtcbraster}
		\cmhlistingsfromfile{demonstrations/multiple-sentences-mod1.tex}{\texttt{multiple-sentences.tex} using \cref{lst:manipulate-sentences-yaml}}{lst:multiple-sentences-mod1}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/manipulate-sentences.yaml}[MLB-TCB]{\texttt{manipulate-sentences.yaml}}{lst:manipulate-sentences-yaml}
	\end{cmhtcbraster}

	\begin{cmhtcbraster}
		\cmhlistingsfromfile{demonstrations/multiple-sentences-mod2.tex}{\texttt{multiple-sentences.tex} using \cref{lst:keep-sen-line-breaks-yaml}}{lst:multiple-sentences-mod2}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/keep-sen-line-breaks.yaml}[MLB-TCB]{\texttt{keep-sen-line-breaks.yaml}}{lst:keep-sen-line-breaks-yaml}
	\end{cmhtcbraster}

	Notice, in particular, that the `internal' sentence line breaks in
	\cref{lst:multiple-sentences} have been removed in \cref{lst:multiple-sentences-mod1}, but have
	not been removed in \cref{lst:multiple-sentences-mod2}.

	The remainder of the settings displayed in \vref{lst:oneSentencePerLine} instruct
	\texttt{latexindent.pl} on how to define a sentence. From the perspective of
	\texttt{latexindent.pl} a sentence must:
	\begin{itemize}
		\item \emph{follow} a certain character or set of characters (see
		      \cref{lst:sentencesFollow}); by default, this is either \lstinline!\par!, a
		      blank line, a full stop/period (.), exclamation mark (!), question mark (?) right brace
		      (\}) or a comment on the previous line;
		\item \emph{begin} with a character type (see \cref{lst:sentencesBeginWith}); by
		      default, this is only capital letters;
		\item \emph{end} with a character (see \cref{lst:sentencesEndWith}); by
		      default, these are full stop/period (.), exclamation mark (!) and question mark (?).
	\end{itemize}
	In each case, you can specify the \texttt{other} field to include any
	pattern that you would like; you can specify anything in this field using the language of
	regular expressions.

	\begin{cmhtcbraster}[raster columns=3,
			raster left skip=-3.5cm,
			raster right skip=-2cm,
			raster column skip=.06\linewidth]
		\cmhlistingsfromfile[style=sentencesFollow]*{../defaultSettings.yaml}[MLB-TCB,width=.9\linewidth,before=\centering]{\texttt{sentencesFollow}}{lst:sentencesFollow}
		\cmhlistingsfromfile[style=sentencesBeginWith]*{../defaultSettings.yaml}[MLB-TCB,width=.9\linewidth,before=\centering]{\texttt{sentencesBeginWith}}{lst:sentencesBeginWith}
		\cmhlistingsfromfile[style=sentencesEndWith]*{../defaultSettings.yaml}[MLB-TCB,width=.9\linewidth,before=\centering]{\texttt{sentencesEndWith}}{lst:sentencesEndWith}
	\end{cmhtcbraster}

\subsubsection{sentencesFollow}
	Let's explore a few of the switches in \texttt{sentencesFollow}; let's start with
	\vref{lst:multiple-sentences}, and use the YAML settings given in
	\cref{lst:sentences-follow1-yaml}. Using the command
	\begin{commandshell}
latexindent.pl multiple-sentences -m -l=sentences-follow1.yaml
\end{commandshell}
	we obtain the output given in \cref{lst:multiple-sentences-mod3}.

	\begin{cmhtcbraster}
		\cmhlistingsfromfile{demonstrations/multiple-sentences-mod3.tex}{\texttt{multiple-sentences.tex} using \cref{lst:sentences-follow1-yaml}}{lst:multiple-sentences-mod3}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/sentences-follow1.yaml}[MLB-TCB]{\texttt{sentences-follow1.yaml}}{lst:sentences-follow1-yaml}
	\end{cmhtcbraster}

	Notice that, because \texttt{blankLine} is set to \texttt{0},
	\texttt{latexindent.pl} will not seek sentences following a blank line, and so the
	fourth sentence has not been accounted for.

	We can explore the \texttt{other} field in \cref{lst:sentencesFollow} with
	the \texttt{.tex} file detailed in \cref{lst:multiple-sentences1}.

	\cmhlistingsfromfile{demonstrations/multiple-sentences1.tex}{\texttt{multiple-sentences1.tex}}{lst:multiple-sentences1}

	Upon running the following commands
	\begin{widepage}
		\begin{commandshell}
latexindent.pl multiple-sentences1 -m -l=manipulate-sentences.yaml
latexindent.pl multiple-sentences1 -m -l=manipulate-sentences.yaml,sentences-follow2.yaml
\end{commandshell}
	\end{widepage}
	then we obtain the respective output given in \cref{lst:multiple-sentences1-mod1,lst:multiple-sentences1-mod2}.
	\cmhlistingsfromfile{demonstrations/multiple-sentences1-mod1.tex}{\texttt{multiple-sentences1.tex} using \vref{lst:manipulate-sentences-yaml}}{lst:multiple-sentences1-mod1}

	\begin{cmhtcbraster}[
			raster force size=false,
			raster column 1/.style={add to width=1cm},
		]
		\cmhlistingsfromfile{demonstrations/multiple-sentences1-mod2.tex}{\texttt{multiple-sentences1.tex} using \cref{lst:sentences-follow2-yaml}}{lst:multiple-sentences1-mod2}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/sentences-follow2.yaml}[MLB-TCB,width=.45\textwidth]{\texttt{sentences-follow2.yaml}}{lst:sentences-follow2-yaml}
	\end{cmhtcbraster}

	Notice that in \cref{lst:multiple-sentences1-mod1} the first sentence after the
	\texttt{)} has not been accounted for, but that following the inclusion
	of \cref{lst:sentences-follow2-yaml}, the output given in \cref{lst:multiple-sentences1-mod2}
	demonstrates that the sentence \emph{has} been accounted for correctly.

\subsubsection{sentencesBeginWith}
	By default, \texttt{latexindent.pl} will only assume that sentences begin with the
	upper case letters \texttt{A-Z}; you can instruct the script to define
	sentences to begin with lower case letters (see \cref{lst:sentencesBeginWith}), and we can
	use the \texttt{other} field to define sentences to begin with other
	characters.

	\cmhlistingsfromfile{demonstrations/multiple-sentences2.tex}{\texttt{multiple-sentences2.tex}}{lst:multiple-sentences2}

	Upon running the following commands
	\begin{widepage}
		\begin{commandshell}
latexindent.pl multiple-sentences2 -m -l=manipulate-sentences.yaml
latexindent.pl multiple-sentences2 -m -l=manipulate-sentences.yaml,sentences-begin1.yaml
\end{commandshell}
	\end{widepage}
	then we obtain the respective output given in \cref{lst:multiple-sentences2-mod1,lst:multiple-sentences2-mod2}.
	\cmhlistingsfromfile{demonstrations/multiple-sentences2-mod1.tex}{\texttt{multiple-sentences2.tex} using \vref{lst:manipulate-sentences-yaml}}{lst:multiple-sentences2-mod1}

	\begin{cmhtcbraster}[
			raster force size=false,
			raster column 1/.style={add to width=1cm},
		]
		\cmhlistingsfromfile{demonstrations/multiple-sentences2-mod2.tex}{\texttt{multiple-sentences2.tex} using \cref{lst:sentences-begin1-yaml}}{lst:multiple-sentences2-mod2}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/sentences-begin1.yaml}[MLB-TCB,width=.45\textwidth]{\texttt{sentences-begin1.yaml}}{lst:sentences-begin1-yaml}
	\end{cmhtcbraster}
	Notice that in \cref{lst:multiple-sentences2-mod1}, the first sentence has been accounted for but
	that the subsequent sentences have not. In \cref{lst:multiple-sentences2-mod2}, all of the
	sentences have been accounted for, because the \texttt{other} field in
	\cref{lst:sentences-begin1-yaml} has defined sentences to begin with either
	\lstinline!$! or any numeric digit, \texttt{0} to
	\texttt{9}.

\subsubsection{sentencesEndWith}
	Let's return to \vref{lst:multiple-sentences}; we have already seen the default way in
	which \texttt{latexindent.pl} will operate on the sentences in this file in
	\vref{lst:multiple-sentences-mod1}. We can populate the \texttt{other} field with
	any character that we wish; for example, using the YAML specified in
	\cref{lst:sentences-end1-yaml} and the command
	\begin{commandshell}
latexindent.pl multiple-sentences -m -l=sentences-end1.yaml
latexindent.pl multiple-sentences -m -l=sentences-end2.yaml
\end{commandshell}
	then we obtain the output in \cref{lst:multiple-sentences-mod4}.

	\begin{cmhtcbraster}
		\cmhlistingsfromfile{demonstrations/multiple-sentences-mod4.tex}{\texttt{multiple-sentences.tex} using \cref{lst:sentences-end1-yaml}}{lst:multiple-sentences-mod4}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/sentences-end1.yaml}[MLB-TCB]{\texttt{sentences-end1.yaml}}{lst:sentences-end1-yaml}
	\end{cmhtcbraster}

	\begin{cmhtcbraster}
		\cmhlistingsfromfile{demonstrations/multiple-sentences-mod5.tex}{\texttt{multiple-sentences.tex} using \cref{lst:sentences-end2-yaml}}{lst:multiple-sentences-mod5}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/sentences-end2.yaml}[MLB-TCB]{\texttt{sentences-end2.yaml}}{lst:sentences-end2-yaml}
	\end{cmhtcbraster}

	There is a subtle difference between the output in \cref{lst:multiple-sentences-mod4,lst:multiple-sentences-mod5}; in
	particular, in \cref{lst:multiple-sentences-mod4} the word \texttt{sentence} has not
	been defined as a sentence, because we have not instructed \texttt{latexindent.pl} to
	begin sentences with lower case letters. We have changed this by using the settings in
	\cref{lst:sentences-end2-yaml}, and the associated output in \cref{lst:multiple-sentences-mod5}
	reflects this.

	Referencing \vref{lst:sentencesEndWith}, you'll notice that there is a field called
	\texttt{basicFullStop}, which is set to \texttt{0}, and that the
	\texttt{betterFullStop} is set to \texttt{1} by default.

	Let's consider the file shown in \cref{lst:url}.

	\cmhlistingsfromfile{demonstrations/url.tex}{\texttt{url.tex}}{lst:url}

	Upon running the following commands
	\begin{commandshell}
latexindent.pl url -m -l=manipulate-sentences.yaml
\end{commandshell}
	we obtain the output given in \cref{lst:url-mod1}.

	\cmhlistingsfromfile{demonstrations/url-mod1.tex}{\texttt{url.tex} using \vref{lst:manipulate-sentences-yaml}}{lst:url-mod1}

	Notice that the full stop within the url has been interpreted correctly. This is because,
	within the \texttt{betterFullStop}, full stops at the end of sentences have the
	following properties:
	\begin{itemize}
		\item they are ignored within \texttt{e.g.} and \texttt{i.e.};
		\item they can not be immediately followed by a lower case or upper case letter;
		\item they can not be immediately followed by a hyphen, comma, or number.
	\end{itemize}
	If you find that the \texttt{betterFullStop} does not work for your purposes, then
	you can switch it off by setting it to \texttt{0}, and you can
	experiment with the \texttt{other}
	field.%
	\announce{2019-07-13}{fine tuning the betterFullStop} You can also seek
	to customise the \texttt{betterFullStop} routine by using the
	\emph{fine tuning}, detailed in \vref{lst:fineTuning}.

	The \texttt{basicFullStop} routine should probably be avoided in most situations, as
	it does not accommodate the specifications above. For example, using the following
	command
	\begin{commandshell}
latexindent.pl url -m -l=alt-full-stop1.yaml
\end{commandshell}
	and the YAML in \cref{lst:alt-full-stop1-yaml} gives the output in
	\cref{lst:url-mod2}.

	\begin{cmhtcbraster}[ raster left skip=-3.5cm,
			raster right skip=-2cm,
			raster force size=false,
			raster column 1/.style={add to width=.1\textwidth},
			raster column skip=.06\linewidth]
		\cmhlistingsfromfile{demonstrations/url-mod2.tex}{\texttt{url.tex} using \cref{lst:alt-full-stop1-yaml}}{lst:url-mod2}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/alt-full-stop1.yaml}[MLB-TCB,width=.5\textwidth]{\texttt{alt-full-stop1.yaml}}{lst:alt-full-stop1-yaml}
	\end{cmhtcbraster}

	Notice that the full stop within the URL has not been accommodated correctly because of
	the non-default settings in \cref{lst:alt-full-stop1-yaml}.

\subsubsection{Features of the oneSentencePerLine routine}
	The sentence manipulation routine takes place \emph{after} verbatim
	environments, preamble and trailing comments have been accounted for; this means that any
	characters within these types of code blocks will not be part of the sentence
	manipulation routine.

	For example, if we begin with the \texttt{.tex} file in
	\cref{lst:multiple-sentences3}, and run the command
	\begin{commandshell}
latexindent.pl multiple-sentences3 -m -l=manipulate-sentences.yaml
\end{commandshell}
	then we obtain the output in \cref{lst:multiple-sentences3-mod1}. \cmhlistingsfromfile{demonstrations/multiple-sentences3.tex}{\texttt{multiple-sentences3.tex}}{lst:multiple-sentences3}
	\cmhlistingsfromfile{demonstrations/multiple-sentences3-mod1.tex}{\texttt{multiple-sentences3.tex} using \vref{lst:manipulate-sentences-yaml}}{lst:multiple-sentences3-mod1}

	Furthermore, if sentences run across environments then, by default, the line breaks
	internal to the sentence will be removed. For example, if we use the
	\texttt{.tex} file in \cref{lst:multiple-sentences4} and run the commands
	\begin{commandshell}
latexindent.pl multiple-sentences4 -m -l=manipulate-sentences.yaml
latexindent.pl multiple-sentences4 -m -l=keep-sen-line-breaks.yaml
\end{commandshell}
	then we obtain the output in \cref{lst:multiple-sentences4-mod1,lst:multiple-sentences4-mod2}. \cmhlistingsfromfile{demonstrations/multiple-sentences4.tex}{\texttt{multiple-sentences4.tex}}{lst:multiple-sentences4}
	\begin{widepage}
		\cmhlistingsfromfile{demonstrations/multiple-sentences4-mod1.tex}{\texttt{multiple-sentences4.tex} using \vref{lst:manipulate-sentences-yaml}}{lst:multiple-sentences4-mod1}
	\end{widepage}
	\cmhlistingsfromfile{demonstrations/multiple-sentences4-mod2.tex}{\texttt{multiple-sentences4.tex} using \vref{lst:keep-sen-line-breaks-yaml}}{lst:multiple-sentences4-mod2}
	Once you've read \cref{sec:poly-switches}, you will know that you can accommodate the
	removal of internal sentence line breaks by using the YAML in \cref{lst:item-rules2-yaml}
	and the command
	\begin{commandshell}
latexindent.pl multiple-sentences4 -m -l=item-rules2.yaml
\end{commandshell}
	the output of which is shown in \cref{lst:multiple-sentences4-mod3}.

	\begin{cmhtcbraster}
		\cmhlistingsfromfile{demonstrations/multiple-sentences4-mod3.tex}{\texttt{multiple-sentences4.tex} using \cref{lst:item-rules2-yaml}}{lst:multiple-sentences4-mod3}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/item-rules2.yaml}[MLB-TCB]{\texttt{item-rules2.yaml}}{lst:item-rules2-yaml}
	\end{cmhtcbraster}

\subsubsection{text wrapping and indenting sentences}
	The \texttt{oneSentencePerLine}%
	\announce{2018-08-13}{oneSentencePerline text wrap and indent} can be instructed to perform
	text wrapping and indentation upon sentences.

	Let's use the code in \cref{lst:multiple-sentences5}.

	\cmhlistingsfromfile{demonstrations/multiple-sentences5.tex}{\texttt{multiple-sentences5.tex}}{lst:multiple-sentences5}

	Referencing \cref{lst:sentence-wrap1-yaml}, and running the following command
	\begin{commandshell}
latexindent.pl multiple-sentences5 -m -l=sentence-wrap1.yaml
\end{commandshell}
	we receive the output given in \cref{lst:multiple-sentences5-mod1}.

	\begin{cmhtcbraster}[ raster left skip=-3.5cm,
			raster right skip=-2cm,
			raster force size=false,
			raster column 1/.style={add to width=.1\textwidth},
			raster column skip=.06\linewidth]
		\cmhlistingsfromfile{demonstrations/multiple-sentences5-mod1.tex}{\texttt{multiple-sentences5.tex} using \cref{lst:sentence-wrap1-yaml}}{lst:multiple-sentences5-mod1}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/sentence-wrap1.yaml}[MLB-TCB,width=0.5\textwidth]{\texttt{sentence-wrap1.yaml}}{lst:sentence-wrap1-yaml}
	\end{cmhtcbraster}

	If you wish to specify the \texttt{columns} field on a per-code-block basis
	for sentences, then you would use \texttt{sentence}; explicitly, starting with
	\vref{lst:textwrap9-yaml}, for example, you would replace/append
	\texttt{environments} with, for example, \texttt{sentence: 50}.

	If you specify \texttt{textWrapSentences} as 1, but do \emph{not}
	specify a value for \texttt{columns} then the text wrapping will
	\emph{not} operate on sentences, and you will see a warning in
	\texttt{indent.log}.

	The indentation of sentences requires that sentences are stored as code blocks. This
	means that you may need to tweak \vref{lst:sentencesEndWith}. Let's explore this in
	relation to \cref{lst:multiple-sentences6}.

	\cmhlistingsfromfile{demonstrations/multiple-sentences6.tex}{\texttt{multiple-sentences6.tex}}{lst:multiple-sentences6}

	By default, \texttt{latexindent.pl} will find the full-stop within the first
	\texttt{item}, which means that, upon running the following commands
	\begin{commandshell}
latexindent.pl multiple-sentences6 -m -l=sentence-wrap1.yaml 
latexindent.pl multiple-sentences6 -m -l=sentence-wrap1.yaml -y="modifyLineBreaks:oneSentencePerLine:sentenceIndent:''"
\end{commandshell}
	we receive the respective output in \cref{lst:multiple-sentences6-mod1} and
	\cref{lst:multiple-sentences6-mod2}.

	\cmhlistingsfromfile{demonstrations/multiple-sentences6-mod1.tex}{\texttt{multiple-sentences6-mod1.tex} using \cref{lst:sentence-wrap1-yaml}}{lst:multiple-sentences6-mod1}

	\cmhlistingsfromfile{demonstrations/multiple-sentences6-mod2.tex}{\texttt{multiple-sentences6-mod2.tex} using \cref{lst:sentence-wrap1-yaml} and no sentence indentation}{lst:multiple-sentences6-mod2}

	We note that \cref{lst:multiple-sentences6-mod1} the \texttt{itemize} code block has
	\emph{not} been indented appropriately. This is because the
	oneSentencePerLine has been instructed to store sentences (because
	\cref{lst:sentence-wrap1-yaml}); each sentence is then searched for code blocks.

	We can tweak the settings in \vref{lst:sentencesEndWith} to ensure that full stops are
	not followed by \texttt{item} commands, and that the end of sentences
	contains \lstinline!\end{itemize}! as in \cref{lst:itemize-yaml} (if you intend to use this, ensure that you
	remove the line breaks from the \texttt{other} field).

	\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/itemized.yaml}[MLB-TCB]{\texttt{itemize.yaml}}{lst:itemize-yaml}

	Upon running
	\begin{commandshell}
latexindent.pl multiple-sentences6 -m -l=sentence-wrap1.yaml,itemize.yaml
\end{commandshell}
	we receive the output in \cref{lst:multiple-sentences6-mod3}.

	\cmhlistingsfromfile{demonstrations/multiple-sentences6-mod3.tex}{\texttt{multiple-sentences6-mod3.tex} using \cref{lst:sentence-wrap1-yaml} and \cref{lst:itemize-yaml}}{lst:multiple-sentences6-mod3}

	Notice that the sentence has received indentation, and that the
	\texttt{itemize} code block has been found and indented correctly.

\subsection{removeParagraphLineBreaks: modifying line breaks for paragraphs}\label{subsec:removeparagraphlinebreaks}
	When the \texttt{-m} switch is active \texttt{latexindent.pl} has the
	ability to remove line breaks%
	\announce{2017-05-27}{removeParagraphLineBreaks} from within paragraphs; the behaviour is controlled by the
	\texttt{removeParagraphLineBreaks} field, detailed in \cref{lst:removeParagraphLineBreaks}. Thank you to
	\cite{jowens} for shaping and assisting with the testing of this feature.
\yamltitle{removeParagraphLineBreaks}*{fields}
	This feature is considered complimentary to the \texttt{oneSentencePerLine} feature
	described in \vref{sec:onesentenceperline}.

	\cmhlistingsfromfile[style=removeParagraphLineBreaks]*{../defaultSettings.yaml}[MLB-TCB,width=.85\linewidth,before=\centering]{\texttt{removeParagraphLineBreaks}}{lst:removeParagraphLineBreaks}

	This routine can be turned on \emph{globally} for \emph{every}
	code block type known to \texttt{latexindent.pl}
	(see \vref{tab:code-blocks}) by using the
	\texttt{all} switch; by default, this switch is
	\emph{off}. Assuming that the \texttt{all} switch is off,
	then the routine can be controlled on a per-code-block-type basis, and within that, on a
	per-name basis. We will consider examples of each of these in turn, but before we do,
	let's specify what \texttt{latexindent.pl} considers as a paragraph:
	\begin{itemize}
		\item it must begin on its own line with either an alphabetic or numeric character, and not
		      with any of the code-block types detailed in \vref{tab:code-blocks};
		\item it can include line breaks, but finishes when it meets either a blank line, a
		      \lstinline!\par! command, or any of the user-specified settings in the
		      \texttt{paragraphsStopAt} field, detailed in \vref{lst:paragraphsStopAt}.
	\end{itemize}

	Let's start with the \texttt{.tex} file in \cref{lst:shortlines},
	together with the YAML settings in \cref{lst:remove-para1-yaml}.

	\begin{cmhtcbraster}
		\cmhlistingsfromfile[showspaces=true]{demonstrations/shortlines.tex}{\texttt{shortlines.tex}}{lst:shortlines}
		\cmhlistingsfromfile{demonstrations/remove-para1.yaml}[MLB-TCB]{\texttt{remove-para1.yaml}}{lst:remove-para1-yaml}
	\end{cmhtcbraster}

	Upon running the command
	\begin{commandshell}
latexindent.pl -m shortlines.tex -o shortlines1.tex -l remove-para1.yaml
\end{commandshell}
	then we obtain the output given in \cref{lst:shortlines1}.

	\cmhlistingsfromfile[showspaces=true]{demonstrations/shortlines1.tex}{\texttt{shortlines1.tex}}{lst:shortlines1}

	Keen readers may notice that some trailing white space must be present in the file in
	\cref{lst:shortlines} which has crept in to the output in
	\cref{lst:shortlines1}. This can be fixed using the YAML file in
	\vref{lst:removeTWS-before} and running, for example,
	\begin{commandshell}
latexindent.pl -m shortlines.tex -o shortlines1-tws.tex -l remove-para1.yaml,removeTWS-before.yaml  
\end{commandshell}
	in which case the output is as in \cref{lst:shortlines1-tws}; notice that the double
	spaces present in \cref{lst:shortlines1} have been addressed.

	\cmhlistingsfromfile[showspaces=true]{demonstrations/shortlines1-tws.tex}{\texttt{shortlines1-tws.tex}}{lst:shortlines1-tws}

	Keeping with the settings in \cref{lst:remove-para1-yaml}, we note that the
	\texttt{all} switch applies to \emph{all} code block
	types. So, for example, let's consider the files in \cref{lst:shortlines-mand,lst:shortlines-opt}

	\begin{cmhtcbraster}
		\cmhlistingsfromfile{demonstrations/shortlines-mand.tex}{\texttt{shortlines-mand.tex}}{lst:shortlines-mand}
		\cmhlistingsfromfile{demonstrations/shortlines-opt.tex}{\texttt{shortlines-opt.tex}}{lst:shortlines-opt}
	\end{cmhtcbraster}

	Upon running the commands
	\begin{widepage}
		\begin{commandshell}
latexindent.pl -m shortlines-mand.tex -o shortlines-mand1.tex -l remove-para1.yaml
latexindent.pl -m shortlines-opt.tex -o shortlines-opt1.tex -l remove-para1.yaml
\end{commandshell}
	\end{widepage}

	then we obtain the respective output given in \cref{lst:shortlines-mand1,lst:shortlines-opt1}.

	\cmhlistingsfromfile{demonstrations/shortlines-mand1.tex}{\texttt{shortlines-mand1.tex}}{lst:shortlines-mand1}
	\cmhlistingsfromfile{demonstrations/shortlines-opt1.tex}{\texttt{shortlines-opt1.tex}}{lst:shortlines-opt1}

	Assuming that we turn \emph{off} the \texttt{all} switch
	(by setting it to \texttt{0}), then we can control the behaviour of
	\texttt{removeParagraphLineBreaks} either on a per-code-block-type basis, or on a per-name
	basis.

	For example, let's use the code in \cref{lst:shortlines-envs}, and consider the settings
	in \cref{lst:remove-para2-yaml,lst:remove-para3-yaml}; note that in \cref{lst:remove-para2-yaml} we specify that
	\emph{every} environment should receive treatment from the routine, while
	in \cref{lst:remove-para3-yaml} we specify that \emph{only} the
	\texttt{one} environment should receive the treatment.

	\begin{minipage}{.45\linewidth}
		\cmhlistingsfromfile{demonstrations/shortlines-envs.tex}{\texttt{shortlines-envs.tex}}{lst:shortlines-envs}
	\end{minipage}
	\hfill
	\begin{minipage}{.49\linewidth}
		\cmhlistingsfromfile{demonstrations/remove-para2.yaml}[MLB-TCB]{\texttt{remove-para2.yaml}}{lst:remove-para2-yaml}
		\cmhlistingsfromfile{demonstrations/remove-para3.yaml}[MLB-TCB]{\texttt{remove-para3.yaml}}{lst:remove-para3-yaml}
	\end{minipage}

	Upon running the commands
	\begin{widepage}
		\begin{commandshell}
latexindent.pl -m shortlines-envs.tex -o shortlines-envs2.tex -l remove-para2.yaml
latexindent.pl -m shortlines-envs.tex -o shortlines-envs3.tex -l remove-para3.yaml
\end{commandshell}
	\end{widepage}
	then we obtain the respective output given in \cref{lst:shortlines-envs2,lst:shortlines-envs3}.

	\cmhlistingsfromfile{demonstrations/shortlines-envs2.tex}{\texttt{shortlines-envs2.tex}}{lst:shortlines-envs2}
	\cmhlistingsfromfile{demonstrations/shortlines-envs3.tex}{\texttt{shortlines-envs3.tex}}{lst:shortlines-envs3}

	The remaining code-block types can be customised in analogous ways, although note that
	\texttt{commands}, \texttt{keyEqualsValuesBracesBrackets}, \texttt{namedGroupingBracesBrackets},
	\texttt{UnNamedGroupingBracesBrackets} are controlled by the \texttt{optionalArguments} and the
	\texttt{mandatoryArguments}.

	The only special case is the \texttt{masterDocument} field; this is designed for
	`chapter'-type files that may contain paragraphs that are not within any other
	code-blocks. For example, consider the file in \cref{lst:shortlines-md}, with the YAML
	settings in \cref{lst:remove-para4-yaml}.

	\begin{cmhtcbraster}
		\cmhlistingsfromfile{demonstrations/shortlines-md.tex}{\texttt{shortlines-md.tex}}{lst:shortlines-md}
		\cmhlistingsfromfile{demonstrations/remove-para4.yaml}[MLB-TCB]{\texttt{remove-para4.yaml}}{lst:remove-para4-yaml}
	\end{cmhtcbraster}

	Upon running the following command
	\begin{widepage}
		\begin{commandshell}
latexindent.pl -m shortlines-md.tex -o shortlines-md4.tex -l remove-para4.yaml
\end{commandshell}
	\end{widepage}
	then we obtain the output in \cref{lst:shortlines-md4}. \cmhlistingsfromfile{demonstrations/shortlines-md4.tex}{\texttt{shortlines-md4.tex}}{lst:shortlines-md4}

	Note%
	\announce{2018-08-13}*{updates to all in removeParagraphLineBreaks} that the
	\texttt{all} field can take the same exceptions detailed in
	\cref{lst:textwrap6-yaml}{lst:textwrap8-yaml}.

\yamltitle{paragraphsStopAt}*{fields}
	The paragraph line break routine considers blank lines and the
	\lstinline|\par| command to be the end of a paragraph;
	\announce{2017-05-27}{paragraphsStopAt} you can fine tune the behaviour of the routine further by
	using the \texttt{paragraphsStopAt} fields, shown in \cref{lst:paragraphsStopAt}.

	\cmhlistingsfromfile[style=paragraphsStopAt]*{../defaultSettings.yaml}[MLB-TCB,width=.85\linewidth,before=\centering]{\texttt{paragraphsStopAt}}{lst:paragraphsStopAt}

	The fields specified in \texttt{paragraphsStopAt} tell \texttt{latexindent.pl} to
	stop the current paragraph when it reaches a line that \emph{begins} with
	any of the code-block types specified as \texttt{1} in
	\cref{lst:paragraphsStopAt}. By default, you'll see that the paragraph line break routine
	will stop when it reaches an environment or verbatim code block at the beginning of a
	line. It is \emph{not} possible to specify these fields on a per-name
	basis.

	Let's use the \texttt{.tex} file in \cref{lst:sl-stop}; we will,
	in turn, consider the settings in \cref{lst:stop-command-yaml,lst:stop-comment-yaml}.

	\begin{minipage}{.45\linewidth}
		\cmhlistingsfromfile{demonstrations/sl-stop.tex}{\texttt{sl-stop.tex}}{lst:sl-stop}
	\end{minipage}
	\hfill
	\begin{minipage}{.49\linewidth}
		\cmhlistingsfromfile{demonstrations/stop-command.yaml}[MLB-TCB]{\texttt{stop-command.yaml}}{lst:stop-command-yaml}

		\cmhlistingsfromfile{demonstrations/stop-comment.yaml}[MLB-TCB]{\texttt{stop-comment.yaml}}{lst:stop-comment-yaml}
	\end{minipage}

	Upon using the settings from \vref{lst:remove-para4-yaml} and running the commands
	\begin{widepage}
		\begin{commandshell}
latexindent.pl -m sl-stop.tex -o sl-stop4.tex -l remove-para4.yaml
latexindent.pl -m sl-stop.tex -o sl-stop4-command.tex -l=remove-para4.yaml,stop-command.yaml
latexindent.pl -m sl-stop.tex -o sl-stop4-comment.tex -l=remove-para4.yaml,stop-comment.yaml
\end{commandshell}
	\end{widepage}
	we obtain the respective outputs in \crefrange{lst:sl-stop4}{lst:sl-stop4-comment}; notice in particular
	that:
	\begin{itemize}
		\item in \cref{lst:sl-stop4} the paragraph line break routine has included commands and
		      comments;
		\item in \cref{lst:sl-stop4-command} the paragraph line break routine has
		      \emph{stopped} at the \texttt{emph} command, because in
		      \cref{lst:stop-command-yaml} we have specified \texttt{commands} to be
		      \texttt{1}, and \texttt{emph} is at the beginning of a
		      line;
		\item in \cref{lst:sl-stop4-comment} the paragraph line break routine has
		      \emph{stopped} at the comments, because in \cref{lst:stop-comment-yaml} we
		      have specified \texttt{comments} to be \texttt{1}, and the
		      comment is at the beginning of a line.
	\end{itemize}
	In all outputs in \crefrange{lst:sl-stop4}{lst:sl-stop4-comment} we notice that the paragraph line break
	routine has stopped at \lstinline!\begin{myenv}! because, by default,
	\texttt{environments} is set to \texttt{1} in
	\vref{lst:paragraphsStopAt}.

	\cmhlistingsfromfile{demonstrations/sl-stop4.tex}{\texttt{sl-stop4.tex}}{lst:sl-stop4}
	\cmhlistingsfromfile{demonstrations/sl-stop4-command.tex}{\texttt{sl-stop4-command.tex}}{lst:sl-stop4-command}
	\cmhlistingsfromfile{demonstrations/sl-stop4-comment.tex}{\texttt{sl-stop4-comment.tex}}{lst:sl-stop4-comment}

\subsection{Combining removeParagraphLineBreaks and textWrapOptions}\label{subsec:removeparagraphlinebreaks:and:textwrap}

	The%
	\announce{2018-08-13}{combine text wrap and remove paragraph line breaks} text wrapping
	routine (\vref{subsec:textwrapping}) and remove paragraph line breaks routine
	(\vref{subsec:removeparagraphlinebreaks}) can be combined.

	We motivate this feature with the code given in \cref{lst:textwrap7}.

	\cmhlistingsfromfile{demonstrations/textwrap7.tex}{\texttt{textwrap7.tex}}{lst:textwrap7}

	Applying the text wrap routine from \vref{subsec:textwrapping} with, for example,
	\vref{lst:textwrap3-yaml} gives the output in \cref{lst:textwrap7-mod3}.

	\cmhlistingsfromfile{demonstrations/textwrap7-mod3.tex}{\texttt{textwrap7.tex} using \cref{lst:textwrap3-yaml}}{lst:textwrap7-mod3}

	The text wrapping routine has behaved as expected, but it may be desired to remove
	paragraph line breaks \emph{before} performing the text wrapping routine.
	The desired behaviour can be achieved by employing the \texttt{beforeTextWrap}
	switch.

	Explicitly, using the settings in \cref{lst:textwrap12-yaml} and running the command
	\begin{commandshell}
latexindent.pl -m textwrap7.tex -l=textwrap12.yaml -o=+-mod12
\end{commandshell}
	we obtain the output in \cref{lst:textwrap7-mod12}.

	\begin{cmhtcbraster}
		\cmhlistingsfromfile{demonstrations/textwrap7-mod12.tex}{\texttt{textwrap7-mod12.tex}}{lst:textwrap7-mod12}
		\cmhlistingsfromfile{demonstrations/textwrap12.yaml}[MLB-TCB]{\texttt{textwrap12.yaml}}{lst:textwrap12-yaml}
	\end{cmhtcbraster}

	In \cref{lst:textwrap7-mod12} the paragraph line breaks have first been removed from
	\cref{lst:textwrap7}, and then the text wrapping routine has been applied. It is
	envisaged that variants of \cref{lst:textwrap12-yaml} will be among the most useful
	settings for these two features.

\subsection{Poly-switches}\label{sec:poly-switches}
	Every other field in the \texttt{modifyLineBreaks} field uses poly-switches, and can
	take one of \emph{five}%
	\announce{2017-08-21}*{blank line poly-switch} integer values:
	\begin{itemize}[font=\bfseries]
		\item[$-1$] \emph{remove mode}: line breaks before or after the
		      \emph{<part of thing>} can be removed (assuming that \texttt{preserveBlankLines} is
		      set to \texttt{0});
		\item[0] \emph{off mode}: line breaks will not be modified for the
		      \emph{<part of thing>} under consideration;
		\item[1] \emph{add mode}: a line break will be added before or after the
		      \emph{<part of thing>} under consideration, assuming that
		      there is not already a line break before or after the \emph{<part of thing>};
		\item[2] \emph{comment then add mode}: a comment symbol will be added, followed by a line break
		      before or after the \emph{<part of thing>} under consideration, assuming that there
		      is not already a comment and line break before or after the \emph{<part of thing>};
		\item[3] \emph{add then blank line mode}%
		      \announce{2017-08-21}{blank line poly-switch}: a line break will be added before or after the
		      \emph{<part of thing>} under consideration, assuming that
		      there is not already a line break before or after the \emph{<part of thing>},
		      followed by a blank line;
		\item[4] \emph{add blank line mode}%
		      \announce{2019-07-13}{blank line poly-switch}; a blank line will
		      be added before or after the \emph{<part of thing>} under consideration, even if the
		      \emph{<part of thing>} is already on its own line.
	\end{itemize}
	In the above, \emph{<part of thing>} refers to either the
	\emph{begin statement}, \emph{body} or \emph{end statement}
	of the code blocks detailed in \vref{tab:code-blocks}. All poly-switches are
	\emph{off} by default; \texttt{latexindent.pl} searches first of all
	for per-name settings, and then followed by global per-thing settings.

\subsection{modifyLineBreaks for environments}\label{sec:modifylinebreaks-environments}
	We start by viewing a snippet of \texttt{defaultSettings.yaml} in
	\cref{lst:environments-mlb}; note that it contains \emph{global} settings
	(immediately after the \texttt{environments} field) and that
	\emph{per-name} settings are also allowed -- in the case of
	\cref{lst:environments-mlb}, settings for \texttt{equation*} have been specified
	for demonstration. Note that all poly-switches are \emph{off} (set to 0) by
	default.

	\cmhlistingsfromfile[style=modifylinebreaksEnv]*{../defaultSettings.yaml}[width=.8\linewidth,before=\centering,MLB-TCB]{\texttt{environments}}{lst:environments-mlb}

	Let's begin with the simple example given in \cref{lst:env-mlb1-tex}; note that we
	have annotated key parts of the file using $\BeginStartsOnOwnLine$,
	$\BodyStartsOnOwnLine$, $\EndStartsOnOwnLine$ and $\EndFinishesWithLineBreak$,
	these will be related to fields specified in \cref{lst:environments-mlb}.

	\begin{cmhlistings}[style=tcblatex,escapeinside={(*@}{@*)}]{\texttt{env-mlb1.tex}}{lst:env-mlb1-tex}
before words(*@$\BeginStartsOnOwnLine$@*) \begin{myenv}(*@$\BodyStartsOnOwnLine$@*)body of myenv(*@$\EndStartsOnOwnLine$@*)\end{myenv}(*@$\EndFinishesWithLineBreak$@*) after words
\end{cmhlistings}

\subsubsection{Adding line breaks: BeginStartsOnOwnLine and BodyStartsOnOwnLine}
	Let's explore \texttt{BeginStartsOnOwnLine} and \texttt{BodyStartsOnOwnLine} in
	\cref{lst:env-mlb1,lst:env-mlb2}, and in particular, let's allow each of them in turn to take
	a value of $1$.

	\begin{minipage}{.45\textwidth}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/env-mlb1.yaml}[MLB-TCB]{\texttt{env-mlb1.yaml}}{lst:env-mlb1}
	\end{minipage}
	\hfill
	\begin{minipage}{.45\textwidth}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/env-mlb2.yaml}[MLB-TCB]{\texttt{env-mlb2.yaml}}{lst:env-mlb2}
	\end{minipage}

	After running the following commands,
	\begin{commandshell}
latexindent.pl -m env-mlb.tex -l env-mlb1.yaml
latexindent.pl -m env-mlb.tex -l env-mlb2.yaml
\end{commandshell}
	the output is as in \cref{lst:env-mlb-mod1,lst:env-mlb-mod2} respectively.

	\begin{widepage}
		\begin{minipage}{.56\linewidth}
			\cmhlistingsfromfile{demonstrations/env-mlb-mod1.tex}{\texttt{env-mlb.tex} using \cref{lst:env-mlb1}}{lst:env-mlb-mod1}
		\end{minipage}
		\hfill
		\begin{minipage}{.43\linewidth}
			\cmhlistingsfromfile{demonstrations/env-mlb-mod2.tex}{\texttt{env-mlb.tex} using \cref{lst:env-mlb2}}{lst:env-mlb-mod2}
		\end{minipage}
	\end{widepage}

	There are a couple of points to note:
	\begin{itemize}
		\item in \cref{lst:env-mlb-mod1} a line break has been added at the point denoted by
		      $\BeginStartsOnOwnLine$ in \cref{lst:env-mlb1-tex}; no other line breaks have been
		      changed;
		\item in \cref{lst:env-mlb-mod2} a line break has been added at the point denoted by
		      $\BodyStartsOnOwnLine$ in \cref{lst:env-mlb1-tex}; furthermore, note that the
		      \emph{body} of \texttt{myenv} has received the appropriate
		      (default) indentation.
	\end{itemize}

	Let's now change each of the \texttt{1} values in
	\cref{lst:env-mlb1,lst:env-mlb2} so that they are $2$ and save them
	into \texttt{env-mlb3.yaml} and \texttt{env-mlb4.yaml} respectively (see
	\cref{lst:env-mlb3,lst:env-mlb4}).

	\begin{minipage}{.45\textwidth}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/env-mlb3.yaml}[MLB-TCB]{\texttt{env-mlb3.yaml}}{lst:env-mlb3}
	\end{minipage}
	\hfill
	\begin{minipage}{.45\textwidth}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/env-mlb4.yaml}[MLB-TCB]{\texttt{env-mlb4.yaml}}{lst:env-mlb4}
	\end{minipage}

	Upon running commands analogous to the above, we obtain \cref{lst:env-mlb-mod3,lst:env-mlb-mod4}.

	\begin{widepage}
		\begin{minipage}{.56\linewidth}
			\cmhlistingsfromfile{demonstrations/env-mlb-mod3.tex}{\texttt{env-mlb.tex} using \cref{lst:env-mlb3}}{lst:env-mlb-mod3}
		\end{minipage}
		\hfill
		\begin{minipage}{.43\linewidth}
			\cmhlistingsfromfile{demonstrations/env-mlb-mod4.tex}{\texttt{env-mlb.tex} using \cref{lst:env-mlb4}}{lst:env-mlb-mod4}
		\end{minipage}
	\end{widepage}

	Note that line breaks have been added as in \cref{lst:env-mlb-mod1,lst:env-mlb-mod2}, but this time a
	comment symbol has been added before adding the line break; in both cases, trailing
	horizontal space has been stripped before doing so.

	Let's%
	\announce{2017-08-21}{demonstration of blank line poly-switch (3)} now change each of
	the \texttt{1} values in \cref{lst:env-mlb1,lst:env-mlb2} so that they are
	$3$ and save them into \texttt{env-mlb5.yaml} and
	\texttt{env-mlb6.yaml} respectively (see \cref{lst:env-mlb5,lst:env-mlb6}).

	\begin{minipage}{.45\textwidth}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/env-mlb5.yaml}[MLB-TCB]{\texttt{env-mlb5.yaml}}{lst:env-mlb5}
	\end{minipage}
	\hfill
	\begin{minipage}{.45\textwidth}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/env-mlb6.yaml}[MLB-TCB]{\texttt{env-mlb6.yaml}}{lst:env-mlb6}
	\end{minipage}

	Upon running commands analogous to the above, we obtain \cref{lst:env-mlb-mod5,lst:env-mlb-mod6}.

	\begin{widepage}
		\begin{minipage}{.56\linewidth}
			\cmhlistingsfromfile{demonstrations/env-mlb-mod5.tex}{\texttt{env-mlb.tex} using \cref{lst:env-mlb5}}{lst:env-mlb-mod5}
		\end{minipage}
		\hfill
		\begin{minipage}{.43\linewidth}
			\cmhlistingsfromfile{demonstrations/env-mlb-mod6.tex}{\texttt{env-mlb.tex} using \cref{lst:env-mlb6}}{lst:env-mlb-mod6}
		\end{minipage}
	\end{widepage}

	Note that line breaks have been added as in \cref{lst:env-mlb-mod1,lst:env-mlb-mod2}, but this time a
	\emph{blank line} has been added after adding the line break.

	Let's now change%
	\announce{2019-07-13}{demonstration of new blank line poly-switch} each of
	the \texttt{1} values in \cref{lst:env-mlb5,lst:env-mlb6} so that they are
	$4$ and save them into \texttt{env-beg4.yaml} and
	\texttt{env-body4.yaml} respectively (see \cref{lst:env-beg4,lst:env-body4}).

	\begin{minipage}{.45\textwidth}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/env-beg4.yaml}[MLB-TCB]{\texttt{env-beg4.yaml}}{lst:env-beg4}
	\end{minipage}
	\hfill
	\begin{minipage}{.45\textwidth}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/env-body4.yaml}[MLB-TCB]{\texttt{env-body4.yaml}}{lst:env-body4}
	\end{minipage}

	We will demonstrate this poly-switch value using the code in \cref{lst:env-mlb1-text}.

	\cmhlistingsfromfile{demonstrations/env-mlb1.tex}{\texttt{env-mlb1.tex}}{lst:env-mlb1-text}

	Upon running the commands
	\begin{commandshell}
latexindent.pl -m env-mlb1.tex -l env-beg4.yaml
latexindent.pl -m env-mlb.1tex -l env-body4.yaml
\end{commandshell}

	then we receive the respective outputs in \cref{lst:env-mlb1-beg4,lst:env-mlb1-body4}.

	\begin{cmhtcbraster}[raster column skip=.1\linewidth]
		\cmhlistingsfromfile{demonstrations/env-mlb1-beg4.tex}{\texttt{env-mlb1.tex} using \cref{lst:env-beg4}}{lst:env-mlb1-beg4}
		\cmhlistingsfromfile{demonstrations/env-mlb1-body4.tex}{\texttt{env-mlb1.tex} using \cref{lst:env-body4}}{lst:env-mlb1-body4}
	\end{cmhtcbraster}

	We note in particular that, by design, for this value of the poly-switches:
	\begin{enumerate}
		\item in \cref{lst:env-mlb1-beg4} a blank line has been inserted before the
		      \lstinline!\begin! statement, even though the \lstinline!\begin!
		      statement was already on its own line;
		\item in \cref{lst:env-mlb1-body4} a blank line has been inserted before the beginning of the
		      \emph{body}, even though it already began on its own line.
	\end{enumerate}

\subsubsection{Adding line breaks using EndStartsOnOwnLine and EndFinishesWithLineBreak}
	Let's explore \texttt{EndStartsOnOwnLine} and \texttt{EndFinishesWithLineBreak} in
	\cref{lst:env-mlb7,lst:env-mlb8}, and in particular, let's allow each of them in turn to take
	a value of $1$.

	\begin{minipage}{.49\textwidth}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/env-mlb7.yaml}[MLB-TCB]{\texttt{env-mlb7.yaml}}{lst:env-mlb7}
	\end{minipage}
	\hfill
	\begin{minipage}{.49\textwidth}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/env-mlb8.yaml}[MLB-TCB]{\texttt{env-mlb8.yaml}}{lst:env-mlb8}
	\end{minipage}

	After running the following commands,
	\begin{commandshell}
latexindent.pl -m env-mlb.tex -l env-mlb7.yaml
latexindent.pl -m env-mlb.tex -l env-mlb8.yaml
\end{commandshell}
	the output is as in \cref{lst:env-mlb-mod7,lst:env-mlb-mod8}.

	\begin{widepage}
		\begin{minipage}{.42\linewidth}
			\cmhlistingsfromfile{demonstrations/env-mlb-mod7.tex}{\texttt{env-mlb.tex} using \cref{lst:env-mlb7}}{lst:env-mlb-mod7}
		\end{minipage}
		\hfill
		\begin{minipage}{.57\linewidth}
			\cmhlistingsfromfile{demonstrations/env-mlb-mod8.tex}{\texttt{env-mlb.tex} using \cref{lst:env-mlb8}}{lst:env-mlb-mod8}
		\end{minipage}
	\end{widepage}

	There are a couple of points to note:
	\begin{itemize}
		\item in \cref{lst:env-mlb-mod7} a line break has been added at the point denoted by
		      $\EndStartsOnOwnLine$ in \vref{lst:env-mlb1-tex}; no other line breaks have been
		      changed and the \lstinline!\end{myenv}! statement has \emph{not}
		      received indentation (as intended);
		\item in \cref{lst:env-mlb-mod8} a line break has been added at the point denoted by
		      $\EndFinishesWithLineBreak$ in \vref{lst:env-mlb1-tex}.
	\end{itemize}

	Let's now change each of the \texttt{1} values in
	\cref{lst:env-mlb7,lst:env-mlb8} so that they are $2$ and save them
	into \texttt{env-mlb9.yaml} and \texttt{env-mlb10.yaml} respectively (see
	\cref{lst:env-mlb9,lst:env-mlb10}).

	\begin{minipage}{.49\textwidth}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/env-mlb9.yaml}[MLB-TCB]{\texttt{env-mlb9.yaml}}{lst:env-mlb9}
	\end{minipage}
	\hfill
	\begin{minipage}{.49\textwidth}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/env-mlb10.yaml}[MLB-TCB]{\texttt{env-mlb10.yaml}}{lst:env-mlb10}
	\end{minipage}

	Upon running commands analogous to the above, we obtain \cref{lst:env-mlb-mod9,lst:env-mlb-mod10}.

	\begin{widepage}
		\begin{minipage}{.43\linewidth}
			\cmhlistingsfromfile{demonstrations/env-mlb-mod9.tex}{\texttt{env-mlb.tex} using \cref{lst:env-mlb9}}{lst:env-mlb-mod9}
		\end{minipage}
		\hfill
		\begin{minipage}{.56\linewidth}
			\cmhlistingsfromfile{demonstrations/env-mlb-mod10.tex}{\texttt{env-mlb.tex} using \cref{lst:env-mlb10}}{lst:env-mlb-mod10}
		\end{minipage}
	\end{widepage}

	Note that line breaks have been added as in \cref{lst:env-mlb-mod7,lst:env-mlb-mod8}, but this time a
	comment symbol has been added before adding the line break; in both cases, trailing
	horizontal space has been stripped before doing so.

	Let's%
	\announce{2017-08-21}{demonstration of blank line poly-switch (3)} now change each
	of the \texttt{1} values in \cref{lst:env-mlb7,lst:env-mlb8} so that they
	are $3$ and save them into \texttt{env-mlb11.yaml} and
	\texttt{env-mlb12.yaml} respectively (see \cref{lst:env-mlb11,lst:env-mlb12}).

	\begin{minipage}{.49\textwidth}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/env-mlb11.yaml}[MLB-TCB]{\texttt{env-mlb11.yaml}}{lst:env-mlb11}
	\end{minipage}
	\hfill
	\begin{minipage}{.49\textwidth}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/env-mlb12.yaml}[MLB-TCB]{\texttt{env-mlb12.yaml}}{lst:env-mlb12}
	\end{minipage}

	Upon running commands analogous to the above, we obtain \cref{lst:env-mlb-mod11,lst:env-mlb-mod12}.

	\begin{widepage}
		\begin{minipage}{.42\linewidth}
			\cmhlistingsfromfile{demonstrations/env-mlb-mod11.tex}{\texttt{env-mlb.tex} using \cref{lst:env-mlb11}}{lst:env-mlb-mod11}
		\end{minipage}
		\hfill
		\begin{minipage}{.57\linewidth}
			\cmhlistingsfromfile{demonstrations/env-mlb-mod12.tex}{\texttt{env-mlb.tex} using \cref{lst:env-mlb12}}{lst:env-mlb-mod12}
		\end{minipage}
	\end{widepage}

	Note that line breaks have been added as in \cref{lst:env-mlb-mod7,lst:env-mlb-mod8}, and that a
	\emph{blank line} has been added after the line break.

	Let's now change%
	\announce{2019-07-13}{demonstration of new blank line poly-switch} each
	of the \texttt{1} values in \cref{lst:env-mlb11,lst:env-mlb12} so that they
	are $4$ and save them into \texttt{env-end4.yaml} and
	\texttt{env-end-f4.yaml} respectively (see \cref{lst:env-end4,lst:env-end-f4}).

	\begin{minipage}{.45\textwidth}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/env-end4.yaml}[MLB-TCB]{\texttt{env-end4.yaml}}{lst:env-end4}
	\end{minipage}
	\hfill
	\begin{minipage}{.5\textwidth}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/env-end-f4.yaml}[MLB-TCB]{\texttt{env-end-f4.yaml}}{lst:env-end-f4}
	\end{minipage}

	We will demonstrate this poly-switch value using the code from
	\vref{lst:env-mlb1-text}.

	Upon running the commands
	\begin{commandshell}
latexindent.pl -m env-mlb1.tex -l env-end4.yaml
latexindent.pl -m env-mlb.1tex -l env-end-f4.yaml
\end{commandshell}

	then we receive the respective outputs in \cref{lst:env-mlb1-end4,lst:env-mlb1-end-f4}.

	\begin{cmhtcbraster}[raster column skip=.1\linewidth]
		\cmhlistingsfromfile{demonstrations/env-mlb1-end4.tex}{\texttt{env-mlb1.tex} using \cref{lst:env-end4}}{lst:env-mlb1-end4}
		\cmhlistingsfromfile{demonstrations/env-mlb1-end-f4.tex}{\texttt{env-mlb1.tex} using \cref{lst:env-end-f4}}{lst:env-mlb1-end-f4}
	\end{cmhtcbraster}

	We note in particular that, by design, for this value of the poly-switches:
	\begin{enumerate}
		\item in \cref{lst:env-mlb1-end4} a blank line has been inserted before the
		      \lstinline!\end! statement, even though the \lstinline!\end!
		      statement was already on its own line;
		\item in \cref{lst:env-mlb1-end-f4} a blank line has been inserted after the
		      \lstinline!\end! statement, even though it already began on its own line.
	\end{enumerate}

\subsubsection{poly-switches 1, 2, and 3 only add line breaks when necessary}
	If you ask \texttt{latexindent.pl} to add a line break (possibly with a comment)
	using a poly-switch value of $1$ (or $2$
	or $3$), it will only do so if necessary. For example, if you
	process the file in \vref{lst:mlb2} using poly-switch values of 1, 2, or 3,
	it will be left unchanged.

	\begin{minipage}{.45\linewidth}
		\cmhlistingsfromfile{demonstrations/env-mlb2.tex}{\texttt{env-mlb2.tex}}{lst:mlb2}
	\end{minipage}
	\hfill
	\begin{minipage}{.45\linewidth}
		\cmhlistingsfromfile{demonstrations/env-mlb3.tex}{\texttt{env-mlb3.tex}}{lst:mlb3}
	\end{minipage}

	Setting the poly-switches to a value of $4$ instructs
	\texttt{latexindent.pl} to add a line break even if the \emph{<part of thing>}
	is already on its own line; see \cref{lst:env-mlb1-beg4,lst:env-mlb1-body4} and
	\cref{lst:env-mlb1-end4,lst:env-mlb1-end-f4}.

	In contrast, the output from processing the file in \cref{lst:mlb3} will
	vary depending on the poly-switches used; in \cref{lst:env-mlb3-mod2} you'll see that
	the comment symbol after the \lstinline!\begin{myenv}! has been moved to the next line,
	as \texttt{BodyStartsOnOwnLine} is set to \texttt{1}. In
	\cref{lst:env-mlb3-mod4} you'll see that the comment has been accounted for correctly
	because \texttt{BodyStartsOnOwnLine} has been set to \texttt{2}, and
	the comment symbol has \emph{not} been moved to its own line. You're
	encouraged to experiment with \cref{lst:mlb3} and by setting the other
	poly-switches considered so far to \texttt{2} in turn.

	\begin{cmhtcbraster}[raster column skip=.1\linewidth]
		\cmhlistingsfromfile{demonstrations/env-mlb3-mod2.tex}{\texttt{env-mlb3.tex} using \vref{lst:env-mlb2}}{lst:env-mlb3-mod2}
		\cmhlistingsfromfile{demonstrations/env-mlb3-mod4.tex}{\texttt{env-mlb3.tex} using \vref{lst:env-mlb4}}{lst:env-mlb3-mod4}
	\end{cmhtcbraster}

	The details of the discussion in this section have concerned \emph{global}
	poly-switches in the \texttt{environments} field; each switch can also be
	specified on a \emph{per-name} basis, which would take priority over the
	global values; with reference to \vref{lst:environments-mlb}, an example is shown for
	the \texttt{equation*} environment.

\subsubsection{Removing line breaks (poly-switches set to $-1$)}
	Setting poly-switches to $-1$ tells \texttt{latexindent.pl}
	to remove line breaks of the \emph{<part of the thing>}, if necessary. We will consider
	the example code given in \cref{lst:mlb4}, noting in particular the
	positions of the line break highlighters, $\BeginStartsOnOwnLine$,
	$\BodyStartsOnOwnLine$, $\EndStartsOnOwnLine$ and $\EndFinishesWithLineBreak$,
	together with the associated YAML files in \crefrange{lst:env-mlb13}{lst:env-mlb16}.

	\begin{minipage}{.45\linewidth}
		\begin{cmhlistings}[style=tcblatex,escapeinside={(*@}{@*)}]{\texttt{env-mlb4.tex}}{lst:mlb4}
before words(*@$\BeginStartsOnOwnLine$@*)
\begin{myenv}(*@$\BodyStartsOnOwnLine$@*)
body of myenv(*@$\EndStartsOnOwnLine$@*)
\end{myenv}(*@$\EndFinishesWithLineBreak$@*)
after words
\end{cmhlistings}
	\end{minipage}%
	\hfill
	\begin{minipage}{.51\textwidth}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/env-mlb13.yaml}[MLB-TCB]{\texttt{env-mlb13.yaml}}{lst:env-mlb13}

		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/env-mlb14.yaml}[MLB-TCB]{\texttt{env-mlb14.yaml}}{lst:env-mlb14}

		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/env-mlb15.yaml}[MLB-TCB]{\texttt{env-mlb15.yaml}}{lst:env-mlb15}

		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/env-mlb16.yaml}[MLB-TCB]{\texttt{env-mlb16.yaml}}{lst:env-mlb16}
	\end{minipage}

	After running the commands
	\begin{commandshell}
latexindent.pl -m env-mlb4.tex -l env-mlb13.yaml
latexindent.pl -m env-mlb4.tex -l env-mlb14.yaml
latexindent.pl -m env-mlb4.tex -l env-mlb15.yaml
latexindent.pl -m env-mlb4.tex -l env-mlb16.yaml
\end{commandshell}

	we obtain the respective output in \crefrange{lst:env-mlb4-mod13}{lst:env-mlb4-mod16}.

	\begin{minipage}{.45\linewidth}
		\cmhlistingsfromfile{demonstrations/env-mlb4-mod13.tex}{\texttt{env-mlb4.tex} using \cref{lst:env-mlb13}}{lst:env-mlb4-mod13}
	\end{minipage}
	\hfill
	\begin{minipage}{.45\linewidth}
		\cmhlistingsfromfile{demonstrations/env-mlb4-mod14.tex}{\texttt{env-mlb4.tex} using \cref{lst:env-mlb14}}{lst:env-mlb4-mod14}
	\end{minipage}

	\begin{minipage}{.45\linewidth}
		\cmhlistingsfromfile{demonstrations/env-mlb4-mod15.tex}{\texttt{env-mlb4.tex} using \cref{lst:env-mlb15}}{lst:env-mlb4-mod15}
	\end{minipage}
	\hfill
	\begin{minipage}{.45\linewidth}
		\cmhlistingsfromfile{demonstrations/env-mlb4-mod16.tex}{\texttt{env-mlb4.tex} using \cref{lst:env-mlb16}}{lst:env-mlb4-mod16}
	\end{minipage}

	Notice that in:
	\begin{itemize}
		\item \cref{lst:env-mlb4-mod13} the line break denoted by $\BeginStartsOnOwnLine$ in
		      \cref{lst:mlb4} has been removed;
		\item \cref{lst:env-mlb4-mod14} the line break denoted by $\BodyStartsOnOwnLine$ in
		      \cref{lst:mlb4} has been removed;
		\item \cref{lst:env-mlb4-mod15} the line break denoted by $\EndStartsOnOwnLine$ in
		      \cref{lst:mlb4} has been removed;
		\item \cref{lst:env-mlb4-mod16} the line break denoted by $\EndFinishesWithLineBreak$ in
		      \cref{lst:mlb4} has been removed.
	\end{itemize}
	We examined each of these cases separately for clarity of explanation, but you can
	combine all of the YAML settings in \crefrange{lst:env-mlb13}{lst:env-mlb16} into one file;
	alternatively, you could tell \texttt{latexindent.pl} to load them all by using the
	following command, for example
	\begin{widepage}
		\begin{commandshell}
latexindent.pl -m env-mlb4.tex -l env-mlb13.yaml,env-mlb14.yaml,env-mlb15.yaml,env-mlb16.yaml
\end{commandshell}
	\end{widepage}
	which gives the output in \vref{lst:env-mlb1-tex}.

\subsubsection{About trailing horizontal space}
	Recall that on \cpageref{yaml:removeTrailingWhitespace} we discussed the YAML field
	\texttt{removeTrailingWhitespace}, and that it has two (binary) switches to determine if
	horizontal space should be removed \texttt{beforeProcessing} and
	\texttt{afterProcessing}. The \texttt{beforeProcessing} is particularly relevant
	when considering the \texttt{-m} switch; let's consider the file shown
	in \cref{lst:mlb5}, which highlights trailing spaces.

	\begin{cmhtcbraster}
		\begin{cmhlistings}[style=tcblatex,showspaces=true,escapeinside={(*@}{@*)}]{\texttt{env-mlb5.tex}}{lst:mlb5}
before words   (*@$\BeginStartsOnOwnLine$@*) 
\begin{myenv}           (*@$\BodyStartsOnOwnLine$@*)
body of myenv      (*@$\EndStartsOnOwnLine$@*) 
\end{myenv}     (*@$\EndFinishesWithLineBreak$@*)
after words
\end{cmhlistings}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/removeTWS-before.yaml}[yaml-TCB]{\texttt{removeTWS-before.yaml}}{lst:removeTWS-before}
	\end{cmhtcbraster}

	The output from the following commands
	\begin{widepage}
		\begin{commandshell}
latexindent.pl -m env-mlb5.tex -l env-mlb13.yaml,env-mlb14.yaml,env-mlb15.yaml,env-mlb16.yaml
latexindent.pl -m env-mlb5.tex -l env-mlb13.yaml,env-mlb14.yaml,env-mlb15.yaml,env-mlb16.yaml,removeTWS-before.yaml
\end{commandshell}
	\end{widepage}
	is shown, respectively, in \cref{lst:env-mlb5-modAll,lst:env-mlb5-modAll-remove-WS}; note that the trailing
	horizontal white space has been preserved (by default) in \cref{lst:env-mlb5-modAll},
	while in \cref{lst:env-mlb5-modAll-remove-WS}, it has been removed using the switch specified in
	\cref{lst:removeTWS-before}.

	\begin{widepage}
		\cmhlistingsfromfile[showspaces=true]{demonstrations/env-mlb5-modAll.tex}{\texttt{env-mlb5.tex} using \crefrange{lst:env-mlb4-mod13}{lst:env-mlb4-mod16}}{lst:env-mlb5-modAll}

		\cmhlistingsfromfile[showspaces=true]{demonstrations/env-mlb5-modAll-remove-WS.tex}{\texttt{env-mlb5.tex} using \crefrange{lst:env-mlb4-mod13}{lst:env-mlb4-mod16} \emph{and} \cref{lst:removeTWS-before}}{lst:env-mlb5-modAll-remove-WS}
	\end{widepage}

\subsubsection{poly-switch line break removal and blank lines}
	Now let's consider the file in \cref{lst:mlb6}, which contains blank lines.

	\begin{cmhtcbraster}
		\begin{cmhlistings}[style=tcblatex,escapeinside={(*@}{@*)}]{\texttt{env-mlb6.tex}}{lst:mlb6}
before words(*@$\BeginStartsOnOwnLine$@*)


\begin{myenv}(*@$\BodyStartsOnOwnLine$@*)


body of myenv(*@$\EndStartsOnOwnLine$@*)


\end{myenv}(*@$\EndFinishesWithLineBreak$@*)

after words
\end{cmhlistings}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/UnpreserveBlankLines.yaml}[MLB-TCB]{\texttt{UnpreserveBlankLines.yaml}}{lst:UnpreserveBlankLines}
	\end{cmhtcbraster}

	Upon running the following commands
	\begin{widepage}
		\begin{commandshell}
latexindent.pl -m env-mlb6.tex -l env-mlb13.yaml,env-mlb14.yaml,env-mlb15.yaml,env-mlb16.yaml
latexindent.pl -m env-mlb6.tex -l env-mlb13.yaml,env-mlb14.yaml,env-mlb15.yaml,env-mlb16.yaml,UnpreserveBlankLines.yaml
\end{commandshell}
	\end{widepage}
	we receive the respective outputs in \cref{lst:env-mlb6-modAll,lst:env-mlb6-modAll-un-Preserve-Blank-Lines}. In
	\cref{lst:env-mlb6-modAll} we see that the multiple blank lines have each been
	condensed into one blank line, but that blank lines have \emph{not}
	been removed by the poly-switches -- this is because, by default,
	\texttt{preserveBlankLines} is set to \texttt{1}. By contrast, in
	\cref{lst:env-mlb6-modAll-un-Preserve-Blank-Lines}, we have allowed the poly-switches to remove blank lines
	because, in \cref{lst:UnpreserveBlankLines}, we have set \texttt{preserveBlankLines} to
	\texttt{0}.

	\begin{cmhtcbraster}[ raster left skip=-3.5cm,
			raster right skip=-2cm,
			raster force size=false,
			raster column 1/.style={add to width=-.2\textwidth},
			raster column 2/.style={add to width=.2\textwidth},
			raster column skip=.06\linewidth]
		\cmhlistingsfromfile{demonstrations/env-mlb6-modAll.tex}{\texttt{env-mlb6.tex} using \crefrange{lst:env-mlb4-mod13}{lst:env-mlb4-mod16}}{lst:env-mlb6-modAll}
		\cmhlistingsfromfile{demonstrations/env-mlb6-modAll-un-Preserve-Blank-Lines.tex}{\texttt{env-mlb6.tex} using \crefrange{lst:env-mlb4-mod13}{lst:env-mlb4-mod16} \emph{and} \cref{lst:UnpreserveBlankLines}}{lst:env-mlb6-modAll-un-Preserve-Blank-Lines}
	\end{cmhtcbraster}

	We can explore this further using the blank-line poly-switch value of
	$3$; let's use the file given in \cref{lst:env-mlb7-tex}.

	\cmhlistingsfromfile{demonstrations/env-mlb7.tex}{\texttt{env-mlb7.tex}}{lst:env-mlb7-tex}

	Upon running the following commands
	\begin{commandshell}
latexindent.pl -m env-mlb7.tex -l env-mlb12.yaml,env-mlb13.yaml
latexindent.pl -m env-mlb7.tex -l env-mlb13.yaml,env-mlb14.yaml,UnpreserveBlankLines.yaml
\end{commandshell}
	we receive the outputs given in \cref{lst:env-mlb7-preserve,lst:env-mlb7-no-preserve}.

	\cmhlistingsfromfile{demonstrations/env-mlb7-preserve.tex}{\texttt{env-mlb7-preserve.tex}}{lst:env-mlb7-preserve}
	\cmhlistingsfromfile{demonstrations/env-mlb7-no-preserve.tex}{\texttt{env-mlb7-no-preserve.tex}}{lst:env-mlb7-no-preserve}

	Notice that in:
	\begin{itemize}
		\item \cref{lst:env-mlb7-preserve} that \lstinline!\end{one}! has added a blank line,
		      because of the value of \texttt{EndFinishesWithLineBreak} in \vref{lst:env-mlb12}, and
		      even though the line break ahead of \lstinline!\begin{two}! should have been removed
		      (because of \texttt{BeginStartsOnOwnLine} in \vref{lst:env-mlb13}), the blank line
		      has been preserved by default;
		\item \cref{lst:env-mlb7-no-preserve}, by contrast, has had the additional line-break removed,
		      because of the settings in \cref{lst:UnpreserveBlankLines}.
	\end{itemize}

\subsection{Poly-switches for double back slash}\label{subsec:dbs}
	With reference to \texttt{lookForAlignDelims} (see \vref{lst:aligndelims:basic})%
	\announce{2019-07-13}{poly-switch for double back slash} you can
	specify poly-switches to dictate the line-break behaviour of double back slashes in
	environments (\vref{lst:tabularafter:basic}), commands (\vref{lst:matrixafter}), or
	special code blocks (\vref{lst:specialafter}). Note that for these poly-switches to
	take effect, the name of the code block must necessarily be specified within
	\texttt{lookForAlignDelims} (\vref{lst:aligndelims:basic}); we will demonstrate this in what follows.

	Consider the code given in \cref{lst:dbs-demo}.
	\begin{cmhlistings}[style=tcblatex,escapeinside={(*@}{@*)}]{\texttt{tabular3.tex}}{lst:dbs-demo}
\begin{tabular}{cc}
 1 & 2 (*@$\ElseStartsOnOwnLine$@*)\\(*@$\ElseFinishesWithLineBreak$@*) 3 & 4 (*@$\ElseStartsOnOwnLine$@*)\\(*@$\ElseFinishesWithLineBreak$@*)
\end{tabular}
\end{cmhlistings}
	Referencing \cref{lst:dbs-demo}:
	\begin{itemize}
		\item \texttt{DBS} stands for \emph{double back slash};
		\item line breaks ahead of the double back slash are annotated by $\ElseStartsOnOwnLine$,
		      and are controlled by \texttt{DBSStartsOnOwnLine};
		\item line breaks after the double back slash are annotated by $\ElseFinishesWithLineBreak$, and
		      are controlled by \texttt{DBSFinishesWithLineBreak}.
	\end{itemize}

	Let's explore each of these in turn.

\subsubsection{Double back slash starts on own line}
	We explore \texttt{DBSStartsOnOwnLine} ($\ElseStartsOnOwnLine$ in \cref{lst:dbs-demo}); starting with the code in
	\cref{lst:dbs-demo}, together with the YAML files given in
	\cref{lst:DBS1} and \cref{lst:DBS2} and running the following
	commands
	\begin{commandshell}
latexindent.pl -m tabular3.tex -l DBS1.yaml
latexindent.pl -m tabular3.tex -l DBS2.yaml
\end{commandshell}
	then we receive the respective output given in \cref{lst:tabular3-DBS1} and
	\cref{lst:tabular3-DBS2}.

	\begin{cmhtcbraster}[raster column skip=.01\linewidth]
		\cmhlistingsfromfile{demonstrations/tabular3-mod1.tex}{\texttt{tabular3.tex} using \cref{lst:DBS1}}{lst:tabular3-DBS1}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/DBS1.yaml}[MLB-TCB]{\texttt{DBS1.yaml}}{lst:DBS1}
	\end{cmhtcbraster}

	\begin{cmhtcbraster}[raster column skip=.01\linewidth]
		\cmhlistingsfromfile{demonstrations/tabular3-mod2.tex}{\texttt{tabular3.tex} using \cref{lst:DBS2}}{lst:tabular3-DBS2}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/DBS2.yaml}[MLB-TCB]{\texttt{DBS2.yaml}}{lst:DBS2}
	\end{cmhtcbraster}

	We note that
	\begin{itemize}
		\item \cref{lst:DBS1} specifies \texttt{DBSStartsOnOwnLine} for
		      \emph{every} environment (that is within \texttt{lookForAlignDelims},
		      \vref{yaml:lookforaligndelims});
		      the double back slashes from \cref{lst:dbs-demo} have been moved to their own
		      line in \cref{lst:tabular3-DBS1};
		\item \cref{lst:DBS2} specifies \texttt{DBSStartsOnOwnLine} on a
		      \emph{per-name} basis for \texttt{tabular} (that is within \texttt{lookForAlignDelims}, \vref{yaml:lookforaligndelims});
		      the double back slashes from \cref{lst:dbs-demo} have been moved to their own
		      line in \cref{lst:tabular3-DBS2}, having added comment symbols before moving them.
	\end{itemize}

\subsubsection{Double back slash finishes with line break}
	Let's now explore \texttt{DBSFinishesWithLineBreak} ($\ElseFinishesWithLineBreak$ in \cref{lst:dbs-demo}); starting with the code in
	\cref{lst:dbs-demo}, together with the YAML files given in
	\cref{lst:DBS3} and \cref{lst:DBS4} and running the following
	commands
	\begin{commandshell}
latexindent.pl -m tabular3.tex -l DBS3.yaml
latexindent.pl -m tabular3.tex -l DBS4.yaml
\end{commandshell}
	then we receive the respective output given in \cref{lst:tabular3-DBS3} and
	\cref{lst:tabular3-DBS4}.

	\begin{cmhtcbraster}[raster column skip=.01\linewidth]
		\cmhlistingsfromfile{demonstrations/tabular3-mod3.tex}{\texttt{tabular3.tex} using \cref{lst:DBS3}}{lst:tabular3-DBS3}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/DBS3.yaml}[MLB-TCB]{\texttt{DBS3.yaml}}{lst:DBS3}
	\end{cmhtcbraster}

	\begin{cmhtcbraster}[raster column skip=.01\linewidth]
		\cmhlistingsfromfile{demonstrations/tabular3-mod4.tex}{\texttt{tabular3.tex} using \cref{lst:DBS4}}{lst:tabular3-DBS4}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/DBS4.yaml}[MLB-TCB]{\texttt{DBS4.yaml}}{lst:DBS4}
	\end{cmhtcbraster}

	We note that
	\begin{itemize}
		\item \cref{lst:DBS3} specifies \texttt{DBSFinishesWithLineBreak} for
		      \emph{every} environment (that is within \texttt{lookForAlignDelims},
		      \vref{yaml:lookforaligndelims});
		      the code following the double back slashes from \cref{lst:dbs-demo} has been
		      moved to their own line in \cref{lst:tabular3-DBS3};
		\item \cref{lst:DBS4} specifies \texttt{DBSFinishesWithLineBreak} on a
		      \emph{per-name} basis for \texttt{tabular} (that is within \texttt{lookForAlignDelims}, \vref{yaml:lookforaligndelims});
		      the first double back slashes from \cref{lst:dbs-demo} have moved code following
		      them to their own line in \cref{lst:tabular3-DBS4}, having added comment symbols
		      before moving them; the final double back slashes have \emph{not} added
		      a line break as they are at the end of the body within the code block.
	\end{itemize}

\subsubsection{Double back slash poly switches for specialBeginEnd}
	Let's explore the double back slash poly-switches for code blocks within
	\texttt{specialBeginEnd} code blocks (\vref{lst:specialBeginEnd}); we begin with
	the code within \cref{lst:special4}.

	\cmhlistingsfromfile{demonstrations/special4.tex}{\texttt{special4.tex}}{lst:special4}

	Upon using the YAML settings in \cref{lst:DBS5}, and running the command
	\begin{commandshell}
latexindent.pl -m special4.tex -l DBS5.yaml
\end{commandshell}
	then we receive the output given in \cref{lst:special4-DBS5}.

	\begin{cmhtcbraster}[
			raster force size=false,
			raster column 1/.style={add to width=-.1\textwidth},
			raster column skip=.06\linewidth]
		\cmhlistingsfromfile{demonstrations/special4-mod5.tex}{\texttt{special4.tex} using \cref{lst:DBS5}}{lst:special4-DBS5}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/DBS5.yaml}[MLB-TCB,width=0.6\textwidth]{\texttt{DBS5.yaml}}{lst:DBS5}
	\end{cmhtcbraster}

	There are a few things to note:
	\begin{itemize}
		\item in \cref{lst:DBS5} we have specified \texttt{cmhMath} within
		      \texttt{lookForAlignDelims}; without this, the double back slash poly-switches would be
		      ignored for this code block;
		\item the \texttt{DBSFinishesWithLineBreak} poly-switch has controlled the line breaks following the
		      double back slashes;
		\item the \texttt{SpecialEndStartsOnOwnLine} poly-switch has controlled the addition of a comment
		      symbol, followed by a line break, as it is set to a value of 2.
	\end{itemize}

\subsubsection{Double back slash poly switches for optional and mandatory arguments}
	For clarity, we provide a demonstration of controlling the double back slash
	poly-switches for optional and mandatory arguments. We begin with the code in
	\cref{lst:mycommand2}.

	\cmhlistingsfromfile{demonstrations/mycommand2.tex}{\texttt{mycommand2.tex}}{lst:mycommand2}

	Upon using the YAML settings in \cref{lst:DBS6,lst:DBS7}, and running the command
	\begin{commandshell}
latexindent.pl -m mycommand2.tex -l DBS6.yaml
latexindent.pl -m mycommand2.tex -l DBS7.yaml
\end{commandshell}
	then we receive the output given in \cref{lst:mycommand2-DBS6,lst:mycommand2-DBS7}.

	\begin{cmhtcbraster}[
			raster force size=false,
			raster column 1/.style={add to width=-.1\textwidth},
			raster column skip=.03\linewidth]
		\cmhlistingsfromfile{demonstrations/mycommand2-mod6.tex}{\texttt{mycommand2.tex} using \cref{lst:DBS6}}{lst:mycommand2-DBS6}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/DBS6.yaml}[MLB-TCB,width=0.6\textwidth]{\texttt{DBS6.yaml}}{lst:DBS6}
	\end{cmhtcbraster}

	\begin{cmhtcbraster}[
			raster force size=false,
			raster column 1/.style={add to width=-.1\textwidth},
			raster column skip=.03\linewidth]
		\cmhlistingsfromfile{demonstrations/mycommand2-mod7.tex}{\texttt{mycommand2.tex} using \cref{lst:DBS7}}{lst:mycommand2-DBS7}
		\cmhlistingsfromfile[style=yaml-LST]*{demonstrations/DBS7.yaml}[MLB-TCB,width=0.6\textwidth]{\texttt{DBS7.yaml}}{lst:DBS7}
	\end{cmhtcbraster}

\subsubsection{Double back slash optional square brackets}
	The pattern matching for the double back slash will also, optionally, allow trailing
	square brackets that contain a measurement of vertical spacing, for example
	\lstinline!\\[3pt]!.

	For example, beginning with the code in \cref{lst:pmatrix3}

	\cmhlistingsfromfile{demonstrations/pmatrix3.tex}{\texttt{pmatrix3.tex}}{lst:pmatrix3}

	and running the following command, using \cref{lst:DBS3},
	\begin{commandshell}
latexindent.pl -m pmatrix3.tex -l DBS3.yaml
\end{commandshell}
	then we receive the output given in \cref{lst:pmatrix3-DBS3}.

	\cmhlistingsfromfile{demonstrations/pmatrix3-mod3.tex}{\texttt{pmatrix3.tex} using \cref{lst:DBS3}}{lst:pmatrix3-DBS3}

	You can customise the pattern for the double back slash by exploring the
	\emph{fine tuning} field detailed in \vref{lst:fineTuning}.

\subsection{Poly-switches for other code blocks}
	Rather than repeat the examples shown for the environment code blocks (in
	\vref{sec:modifylinebreaks-environments}), we choose to detail the poly-switches for all other code
	blocks in \cref{tab:poly-switch-mapping}; note that each and every one of these
	poly-switches is \emph{off by default}, i.e, set to \texttt{0}.

	Note also that, by design, line breaks involving, \texttt{filecontents} and
	`comment-marked' code blocks (\vref{lst:alignmentmarkup}) can
	\emph{not} be modified using
	\texttt{latexindent.pl}.%
	\announce{2019-05-05}*{verbatim poly-switch} However, there are two poly-switches available for
	\texttt{verbatim} code blocks: environments (\vref{lst:verbatimEnvironments}),
	commands (\vref{lst:verbatimCommands}) and \texttt{specialBeginEnd} (\vref{lst:special-verb1-yaml}).

	\clearpage
	\begin{longtable}{llll}
		\caption{Poly-switch mappings for all code-block types}\label{tab:poly-switch-mapping}                                                                                                                                                         \\
		\toprule
		Code block                                             & Sample                                                                  & \multicolumn{2}{c}{Poly-switch mapping}                                                                     \\
		\midrule
		environment                                            & \verb!before words!$\BeginStartsOnOwnLine$                      & $\BeginStartsOnOwnLine$                 & BeginStartsOnOwnLine                                              \\
		                                                       & \verb!\begin{myenv}!$\BodyStartsOnOwnLine$                       & $\BodyStartsOnOwnLine$                  & BodyStartsOnOwnLine                                               \\
		                                                       & \verb!body of myenv!$\EndStartsOnOwnLine$                        & $\EndStartsOnOwnLine$                   & EndStartsOnOwnLine                                                \\
		                                                       & \verb!\end{myenv}!$\EndFinishesWithLineBreak$                  & $\EndFinishesWithLineBreak$             & EndFinishesWithLineBreak                                          \\
		                                                       & \verb!after words!                                             &                                         &                                                                   \\
		\cmidrule{2-4}
		ifelsefi                                               & \verb!before words!$\BeginStartsOnOwnLine$                      & $\BeginStartsOnOwnLine$                 & IfStartsOnOwnLine                                                 \\
		                                                       & \verb!\if...!$\BodyStartsOnOwnLine$                       & $\BodyStartsOnOwnLine$                  & BodyStartsOnOwnLine                                               \\
		                                                       & \verb!body of if/or statement!$\OrStartsOnOwnLine$                         & $\OrStartsOnOwnLine$                    & OrStartsOnOwnLine                                                 %
		\announce{2018-04-27}{new ifElseFi code block poly-switches}                                                                                                                                                                                   \\
		                                                       & \verb!\or!$\OrFinishesWithLineBreak$                   & $\OrFinishesWithLineBreak$              & OrFinishesWithLineBreak                                           \\
		                                                       & \verb!body of if/or statement!$\ElseStartsOnOwnLine$                       & $\ElseStartsOnOwnLine$                  & ElseStartsOnOwnLine                                               \\
		                                                       & \verb!\else!$\ElseFinishesWithLineBreak$                 & $\ElseFinishesWithLineBreak$            & ElseFinishesWithLineBreak                                         \\
		                                                       & \verb!body of else statement!$\EndStartsOnOwnLine$                        & $\EndStartsOnOwnLine$                   & FiStartsOnOwnLine                                                 \\
		                                                       & \verb!\fi!$\EndFinishesWithLineBreak$                  & $\EndFinishesWithLineBreak$             & FiFinishesWithLineBreak                                           \\
		                                                       & \verb!after words!                                             &                                         &                                                                   \\
		\cmidrule{2-4}
		optionalArguments                                      & \verb!...!$\BeginStartsOnOwnLine$                      & $\BeginStartsOnOwnLine$                 & LSqBStartsOnOwnLine\footnote{LSqB stands for Left Square Bracket} \\
		                                                       & \verb![!$\BodyStartsOnOwnLine$                       & $\BodyStartsOnOwnLine$                  & OptArgBodyStartsOnOwnLine                                         \\
		\announce{2019-07-13}{new comma-related poly-switches} & \verb!value before comma!$\ElseStartsOnOwnLine$,                      & $\ElseStartsOnOwnLine$                  & CommaStartsOnOwnLine                                              \\
		                                                       & $\ElseFinishesWithLineBreak$                                            & $\ElseFinishesWithLineBreak$            & CommaFinishesWithLineBreak                                        \\
		                                                       & \verb!end of body of opt arg!$\EndStartsOnOwnLine$                        & $\EndStartsOnOwnLine$                   & RSqBStartsOnOwnLine                                               \\
		                                                       & \verb!]!$\EndFinishesWithLineBreak$                  & $\EndFinishesWithLineBreak$             & RSqBFinishesWithLineBreak                                         \\
		                                                       & \verb!...!                                             &                                         &                                                                   \\
		\cmidrule{2-4}
		mandatoryArguments                                     & \verb!...!$\BeginStartsOnOwnLine$                      & $\BeginStartsOnOwnLine$                 & LCuBStartsOnOwnLine\footnote{LCuB stands for Left Curly Brace}    \\
		                                                       & \verb!{!$\BodyStartsOnOwnLine$                       & $\BodyStartsOnOwnLine$                  & MandArgBodyStartsOnOwnLine                                        \\
		\announce{2019-07-13}{new comma-related poly-switches} & \verb!value before comma!$\ElseStartsOnOwnLine$,                      & $\ElseStartsOnOwnLine$                  & CommaStartsOnOwnLine                                              \\
		                                                       & $\ElseFinishesWithLineBreak$                                            & $\ElseFinishesWithLineBreak$            & CommaFinishesWithLineBreak                                        \\
		                                                       & \verb!end of body of mand arg!$\EndStartsOnOwnLine$                        & $\EndStartsOnOwnLine$                   & RCuBStartsOnOwnLine                                               \\
		                                                       & \verb!}!$\EndFinishesWithLineBreak$                  & $\EndFinishesWithLineBreak$             & RCuBFinishesWithLineBreak                                         \\
		                                                       & \verb!...!                                             &                                         &                                                                   \\
		\cmidrule{2-4}
		commands                                               & \verb!before words!$\BeginStartsOnOwnLine$                      & $\BeginStartsOnOwnLine$                 & CommandStartsOnOwnLine                                            \\
		                                                       & \verb!\mycommand!$\BodyStartsOnOwnLine$                       & $\BodyStartsOnOwnLine$                  & CommandNameFinishesWithLineBreak                                  \\
		                                                       & $\langle$\itshape{arguments}$\rangle$                                   &                                         &                                                                   \\
		\cmidrule{2-4}
		namedGroupingBraces Brackets                           & before words$\BeginStartsOnOwnLine$                                     & $\BeginStartsOnOwnLine$                 & NameStartsOnOwnLine                                               \\
		                                                       & myname$\BodyStartsOnOwnLine$                                            & $\BodyStartsOnOwnLine$                  & NameFinishesWithLineBreak                                         \\
		                                                       & $\langle$\itshape{braces/brackets}$\rangle$                             &                                         &                                                                   \\
		\cmidrule{2-4}
		keyEqualsValuesBraces\newline Brackets                 & before words$\BeginStartsOnOwnLine$                                     & $\BeginStartsOnOwnLine$                 & KeyStartsOnOwnLine                                                \\
		                                                       & key$\EqualsStartsOnOwnLine$=$\BodyStartsOnOwnLine$                      & $\EqualsStartsOnOwnLine$                & EqualsStartsOnOwnLine                                             \\
		                                                       & $\langle$\itshape{braces/brackets}$\rangle$                             & $\BodyStartsOnOwnLine$                  & EqualsFinishesWithLineBreak                                       \\
		\cmidrule{2-4}
		items                                                  & before words$\BeginStartsOnOwnLine$                                     & $\BeginStartsOnOwnLine$                 & ItemStartsOnOwnLine                                               \\
		                                                       & \verb!\item!$\BodyStartsOnOwnLine$                       & $\BodyStartsOnOwnLine$                  & ItemFinishesWithLineBreak                                         \\
		                                                       & \verb!...!                                             &                                         &                                                                   \\
		\cmidrule{2-4}
		specialBeginEnd                                        & before words$\BeginStartsOnOwnLine$                                     & $\BeginStartsOnOwnLine$                 & SpecialBeginStartsOnOwnLine                                       \\
		                                                       & \verb!\[!$\BodyStartsOnOwnLine$                       & $\BodyStartsOnOwnLine$                  & SpecialBodyStartsOnOwnLine                                        \\
		                                                       & \verb!body of special/middle!$\ElseStartsOnOwnLine$                       & $\ElseStartsOnOwnLine$                  & SpecialMiddleStartsOnOwnLine                                      %
		\announce{2018-04-27}{new special code block poly-switches}                                                                                                                                                                                    \\
		                                                       & \verb!\middle!$\ElseFinishesWithLineBreak$                 & $\ElseFinishesWithLineBreak$            & SpecialMiddleFinishesWithLineBreak                                \\
		                                                       & body of special/middle $\EndStartsOnOwnLine$                            & $\EndStartsOnOwnLine$                   & SpecialEndStartsOnOwnLine                                         \\
		                                                       & \verb!\]!$\EndFinishesWithLineBreak$                  & $\EndFinishesWithLineBreak$             & SpecialEndFinishesWithLineBreak                                   \\
		                                                       & after words                                                             &                                         &                                                                   \\
		\cmidrule{2-4}
		verbatim                                               & before words$\BeginStartsOnOwnLine$\verb!\begin{verbatim}!          & $\BeginStartsOnOwnLine$                 & VerbatimBeginStartsOnOwnLine                                      \\
		\announce{2019-05-05}{verbatim poly-switches}          & body of verbatim \verb!\end{verbatim}!$\EndFinishesWithLineBreak$ & $\EndFinishesWithLineBreak$             & VerbatimEndFinishesWithLineBreak                                  \\
		                                                       & after words                                                             &                                         &                                                                   \\
		\bottomrule
	\end{longtable}