path: root/macros/latex/contrib/qstest/qstest.dtx

\errorcontextlines=\maxdimen
% \iffalse
%%
%% Copyright (C) 2006, 2007 QuinScape GmbH
%% http://www.quinscape.de
%
% This file may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either version 1.3
% of this license or (at your option) any later version.
% The latest version of this license is in
%    http://www.latex-project.org/lppl.txt
% \fi
%
% \CheckSum{1258}
% \section{Using \texttt{qstest}}
%
% The basic idea of \texttt{qstest} is to let the user specify a
% number of tests that can be performed either at package load time or
% while running a separate test file through \LaTeX.  If you are
% writing |.dtx| files, it is a good idea to use Docstrip `modules'
% for specifying which lines are to be used for testing.  The file
% |qstest.dtx| from which both the style file as well as this
% documentation have been generated has been done in this manner.
%
% Since the following tests should be ignored when the |dtx| file is
% compiled itself, we use this for skipping over the tests:
%    \begin{macrocode}
%<*dtx>
\iffalse
%</dtx>
%    \end{macrocode}
%
% A standalone test file actually does not need a preamble.  We can
% load the packages with \cmd{\RequirePackage} and just go ahead.  Let
% us demonstrate how to build such a test file by testing the |qstest|
% package itself:
%    \begin{macrocode}
%<*test>
\RequirePackage{qstest}
%    \end{macrocode}
%
% \subsection{Pattern and keyword lists}
%
% Check section \href{file:makematch#patterns}{``Match patterns and
%   targets''} of the |makematch| package for an explanation of the
% comma-separated pattern and keyword lists.  In a nutshell, both are
% lists of arbitrary material that is not expanded but rather used in
% sanitized (printable) form.  Patterns may contain wildcard
% characters |*| matching zero or more characters, and may be preceded
% by |!| in order to negate a match from an earlier pattern in the
% pattern list.  Leading spaces before an item in either list are
% discarded.
%
% \subsection{Specifying test sets}
%
% \DescribeMacro{\IncludeTests} This macro specifies a pattern list
% matched to tests' keyword lists in order to determine the tests to
% be included in this test run.  The characters |*| and |!| are
% interpreted as explained above.
%
% For example,
% \begin{quote}
%   |\IncludeTests{*, !\cs}|
% \end{quote}
% will run all tests except those that have a test keyword of |\cs| in
% their list of keywords.  It is a good convention to specify the
% principal macro or environment to be tested as the first keyword.
%
% The default is to include all tests.  If you are interspersing
% possibly expensive tests with your source file, you might want to
% specify something like
% \begin{quote}
%   |\IncludeTests{*, !expensive}|
% \end{quote}
% or even
% \begin{quote}
%   |\IncludeTests{}|
% \end{quote}
% in your document preamble, and then possibly override this on the
% command line with
% \begin{quote}
%   |latex "\AtBeginDocument{\IncludeTests{*}}\input{file}"|
% \end{quote}
% or similar for getting a more complete test.
%
% \DescribeMacro{\TestErrors} This defines test patterns that will
% throw an error when failing.  A test that throws an error will not
% also add a warning to the standard log file with extension |log|
% since that would be redundant.
%
% The default is |\TestErrors{*, !fails}|, have all tests that are not
% marked as broken throw an error when they fail.
%
% The throwing of errors does not depend on the logging settings (see
% below) for the default |log| file.
%
% \DescribeMacro{\LogTests} This macro receives three arguments.  The
% first is the filename extension of a log file (the extension |log|
% is treated specially and uses package warning and info commands to
% log test failures and passes, respectively).  The second is a
% keyword list that indicates which passed tests are to be logged.
% The third is a keyword list specifying which failed tests are to be
% logged.  Let us open a file logging everything:
%    \begin{macrocode}
\LogTests{lgout}{*}{*}
%    \end{macrocode}
% The choice of |lgout| is made to make it possible to also have
% |lgin| for comparison purposes: the latter would be an |lgout| file
% from a previous, `definitive run', renamed and checked into version
% control, for the sake of being able to compare the log output from
% different versions.
%
% An already open log file stays open and just changes what is logged.
% By default, the standard |log|
% \mbox{(pseudo-)}\discretionary{}{}{}file is already open and logs
% everything.
%
% Passed and failed tests are not completely symmetric with regard to
% logging: test failures are logged and/or indicated on the individual
% failed assertions, while a successful test is only logged and/or
% indicated in summary.
%
% \DescribeMacro{\LogClose} You can explicitly close a log file if you
% want to reread it in the course of processing, or call an executable
% that would process it.  The standard file with extension |log| will
% not actually get closed and flushed if you do this (though logging
% would stop on it), but all others might.  The actual example for
% this follows after the tests.  You can reopen a closed log file
% using \cmd{\LogTests}.  It will then get rewritten from the
% beginning (with the exception for the standard |log| file, of
% course).
%
% \subsection{The tests}
%
% \DescribeEnv{qstest}
% Tests are performed within the |qstest| environment.  The
% environment gets two arguments.  The first is the name of the test
% recorded in the log file.  The second is a list of test keywords
% used for deciding which tests are performed and logged.
%
% Before delving in the details of what kind of tests you can perform
% in this environment, we list the various commands that are given
% patterns and thus control what kind of tests are performed and
% logged.
%
% \DescribeMacro{\Expect}
% This is the workhorse for checking that values, dimensions, macros
% and other things are just like the test designer would expect them
% to be.
%
% This macro basically receives two brace-delimited
% arguments\footnote{The arguments are collected with a token register
%   assignment.  This gives several options for specifying them,
%   including giving a token register without braces around it.  It
%   also makes it possible to precede the \textsl{balanced text} with
%   \cmd{\expandafter} and similar expandable stuff.} and checks that
% they are equal after being passed through \cmd{\def} and sanitized.
% This means that you can't normally use |#| except when followed by a
% digit (all from 1 to 9 are allowed) or |#|.  If you precede one of
% those arguments with |*| it gets passed through through \cmd{\edef}
% instead of \cmd{\def}.  There may also be additional tokens like
% |\expandafter| before the opening brace.  Note that the combination
% of \cmd{\edef} and |\the|\meta{token variable} can be used to pass
% through |#| characters without interpretation.  e\TeX\ provides a
% similar effect with \cmd{\unexpanded}.  So if you want to compare a
% token list that may contain isolated hash characters, you can do so
% by writing something like
%    \begin{macrocode}
%<*etex>
\begin{qstest}{# in isolation}{\Expect, #, \unexpanded}
  \toks0{# and #}
  \Expect*{\the\toks0}*{\unexpanded{# and #}}
\end{qstest}
%</etex>
%    \end{macrocode}
% Since the sanitized version will convert |#| macro parameters to the
% string |##|, you might also do this explicitly (and without e\TeX)
% as
%    \begin{macrocode}
\begin{qstest}{# in isolation 2}{\Expect, #, \string}
  \toks0{# and #}
  \Expect*{\the\toks0}*{\string#\string# and \string#\string#}
\end{qstest}
%    \end{macrocode}
% If the token register is guaranteed to only contain `proper' |#|
% characters that are either followed by another |#| or a digit, you
% can let the normal interpretation of a macro parameter for
% \cmd{\def} kick in and use this as
%    \begin{macrocode}
\begin{qstest}{# as macro parameter}{\Expect, #}
  \toks0{\def\xxx#1{}}
  \Expect\expandafter{\the\toks0}{\def\xxx#1{}}
\end{qstest}
%    \end{macrocode}
%   In this manner, |#1| is interpreted (and sanitized) as a macro
%   parameter on both sides, and consequently no doubling of |#|
%   occurs.
%
%   Before the comparison is done, both arguments are sanitized,
%   converted into printing characters with standardized catcodes
%   throughout\footnote{Spaces get catcode~10, all other characters
%     catcode~12.}.  A word of warning: both sanitization as well as
%   using \cmd{\meaning} still depend on catcode settings, since
%   single-letter control sequences (made from a catcode 11 letter)
%   are followed by a space, and other single-character control
%   sequences are not.  For that reason, a standalone test file for
%   \LaTeX\ class or package files will usually need to declare
%    \begin{macrocode}
\makeatletter
%    \end{macrocode}
%   in order to make `|@|' a letter, like it usually is in such
%   files.
%
%   All of the of the following expectations would turn out correct:
%    \begin{macrocode}
\begin{qstest}{Some LaTeX definitions}{\Expect}
  \Expect*{\meaning\@gobble}{\long macro:#1->}
  \Expect*{\the\maxdimen}{16383.99998pt}
\end{qstest}
%    \end{macrocode}
% Note that there is no way to convert the contents of a box into a
% printable rendition, so with regard to boxes, you will be mostly
% reduced to check that dimensions of a box meet expectations.
%
% \subsection{Expecting \texttt{ifthen} conditions}
% \DescribeMacro{\ExpectIfThen}
%   This is used for evaluating a condition as provided by the
%   |ifthen| package.  See its docs for the kind of condition that is
%   possible there.  You just specify one argument: the condition that
%   you expect to be true.  Here is an example:
%    \begin{macrocode}
\RequirePackage{ifthen}
\begin{qstest}{\ExpectIfThen}{\ExpectIfThen}
  \ExpectIfThen{\lengthtest{\maxdimen=16383.99998pt}\AND
    \maxdimen>1000000000}
\end{qstest}
%    \end{macrocode}
%
% \subsection{Dimension ranges}
%
% \DescribeMacro{\InRange} Sometimes we want to check whether some
% dimension is not exactly like some value, but rather in some range.
% We do this by specifying as the second argument to \cmd{\Expect} an
% artificial macro with two arguments specifying the range in
% question.  This will make \cmd{\Expect} succeed if its first
% argument is in the range specified by the two arguments to
% \cmd{\InRange}.
%
% The range is specified as two \TeX\ dimens.  If you use a dimen
% register and you want to have a possible error message display the
% value instead of the dimen register, you can do so by using the |*|
% modifier before \cmd{\InRange} (which will cause the value to be
% expanded before printing and comparing) and put \cmd{\the} before
% the dimen register since such register are not expandible by
% themselves.
%
% Here are some examples:
%    \begin{macrocode}
\begin{qstest}{\InRange success}{\InRange}
  \dimen@=10pt
  \Expect*{\the\dimen@}\InRange{5pt}{15pt}
  \Expect*{\the\dimen@}\InRange{10pt}{15pt}
  \Expect*{\the\dimen@}\InRange{5pt}{10pt}
\end{qstest}
\begin{qstest}{\InRange failure}{\InRange, fails}
  \dimen@=10pt \dimen@ii=9.99998pt
  \Expect*{\the\dimen@}\InRange{5pt}{\dimen@ii}
  \dimen@ii=10.00002pt
  \Expect*{\the\dimen@}*\InRange{\the\dimen@ii}{15pt}
\end{qstest}
%    \end{macrocode}
% \DescribeMacro{\NearTo} This requires e\TeX's arithmetic and will
% not be available for versions built without e\TeX\ support.  The
% macro is used in lieu of an expected value and is similar to
% \cmd{InRange} in that it is a pseudovalue to be used for the second
% argument of \cmd{\Expect}.  It makes \cmd{\Expect} succeed if its
% own mandatory argument is close to the first argument from
% \cmd{\Expect}, where closeness is defined as being within |0.05pt|.
% This size can be varied by specifying a different one as optional
% argument to \cmd{\NearTo}.  Here is a test:
%    \begin{macrocode}
%<*etex>
\begin{qstest}{\NearTo success}{\NearTo}
  \dimen@=10pt
  \Expect*{\the\dimen@}\NearTo{10.05pt}
  \Expect*{\the\dimen@}\NearTo{9.95pt}
  \Expect*{\the\dimen@}\NearTo[2pt]{12pt}
  \Expect*{\the\dimen@}\NearTo[0.1pt]{9.9pt}
\end{qstest}
\begin{qstest}{\NearTo failure}{\NearTo, fails}
  \dimen@=10pt
  \Expect*{\the\dimen@}\NearTo{10.05002pt}
  \Expect*{\the\dimen@}\NearTo[1pt]{11.00001pt}
\end{qstest}
%</etex>
%    \end{macrocode}
%
% \subsection{Saved results}
%
% The purpose of saved results is to be able to check that the value
% has remained the same over passes.  Results are given a unique label
% name and are written to an auxiliary file where they can be read in
% for the sake of comparison.  One can use the normal |aux| file for
% this purpose, but it might be preferable to use a separate dedicated
% file.  That way it is possible to input a versioned \emph{copy} of
% this file and have a fixed point of reference rather than the last
% run.
%
% While the |aux| file is read in automatically at the beginning of
% the document, this does not happen with explicitly named files.  You
% have to read them in yourself, preferably using
% \begin{quote}
%   |\InputIfFileExists|\marg{filename}|{}{}|
% \end{quote}
% so that no error is thrown when the file does not yet exist.
%
% \DescribeMacro{\SaveValueFile} This gets one argument specifying
% which file name to use for saving results.  If this is specified, a
% special file is opened.  If \cmd{\SaveValueFile} is not called, the
% standard |aux| file is used instead, but then you can only save
% values after |\begin||{document}|.  |\jobname.qsout| seems like a
%   useful file name to use here (the extension |out| is already in
%   use by PDF\TeX).
%    \begin{macrocode}
\begin{qstest}{\SavedValue}{\SavedValue}
  \SaveValueFile{\jobname.qsout}
%    \end{macrocode}
% If this were a real test instead of just documentation, we probably
% would have written something like
% \begin{quote}
%   |\InputIfFileExists{\jobname.qsin}{}{}|
% \end{quote}
% first in order to read in values from a previous run.  The given
% file would have been a copy of a previous |qsout| file, possibly
% checked into version control in order to make sure behavior is
% consistent across runs.  If it is an error to not have such a file
% (once you have established appropriate testing), you can just write
% \begin{quote}
%   |\input{\jobname.qsin}|
% \end{quote}
% instead, of course.
%
% \DescribeMacro{\CloseValueFile} This macro takes no argument and
% will close a value save file if one is open (using this has no
% effect if no file has been opened and values are saved on the |aux|
% file instead).  We'll demonstrate use of it later.  It is probably
% only necessary for testing |qstest| itself (namely, when you read in
% saved values in the same run), or when you do the
% processing/comparison with a previous version by executing commands
% via \TeX's |\write18| mechanism.
%
% \DescribeMacro{\SaveValue} This gets the label name as first
% argument.  If you are using the non-e\TeX-version, the label name
% gets sanitized using \cmd{\string} and so can't deal with
% non-character material except at its immediate beginning.  The
% e\TeX-version has no such constraint.
%
% The second argument is the same kind of argument as \cmd{\Expect}
% expects, namely something suitable for a token register assignment
% which is passed through \cmd{\def} if not preceded by |*|, and by
% \cmd{\edef} if preceded by |*|.  The value is written out to the
% save file where it can be read in afterwards.
%
% Let us save a few values under different names now:
%    \begin{macrocode}
  \SaveValue{\InternalSetValue}*{\meaning\InternalSetValue}
  \SaveValue{\IncludeTests}*{\meaning\IncludeTests}
  \SaveValue{whatever}*{3.1415}
  \SaveValue{\maxdimen}*{\the\maxdimen}
%    \end{macrocode}
% \DescribeMacro{\InternalSetValue} A call to this macro is placed
% into the save file for each call of \cmd{\SaveValue}.  The details
% are not really relevant: in case you run into problems while
% inputting the save file, it might be nice to know.
%
% \DescribeMacro{\SavedValue} This is used for retrieving a saved
% value.  When used as the second argument to \cmd{\Expect}, it will
% default to the value of the first argument to \cmd{\Expect} unless
% it has been read in from a save file.  This behavior is intended for
% making it easy to add tests and saved values and not get errors at
% first, until actually values from a previous test become available.
%
% Consequently, the following tests will all turn out true before we
% read in a file, simply because all the saved values are not yet
% defined and default to the expectations:
%    \begin{macrocode}
  \Expect{Whatever}\SavedValue{\InternalSetValue}
  \Expect[\IncludeTests]{Whatever else}\SavedValue{\IncludeTests}
  \Expect[whatever]{2.71828}\SavedValue{whatever}
  \Expect[undefined]{1.618034}\SavedValue{undefined}
%    \end{macrocode}
% After closing and rereading the file, we'll need to be more careful
% with our expectations, but the last line still works since there
% still is no saved value for ``undefined''.
%    \begin{macrocode}
  \CloseValueFile
  \input{\jobname.qsout}
  \Expect*{\meaning\InternalSetValue}\SavedValue{\InternalSetValue}
  \Expect[\IncludeTests]*{\meaning\IncludeTests}%
                         \SavedValue{\IncludeTests}
  \Expect[whatever]{3.1415}\SavedValue{whatever}
  \Expect[undefined]{1.618034}\SavedValue{undefined}
\end{qstest}
%    \end{macrocode}
% Ok, and now lets take the previous tests which succeeded again and
% let them fail now that the variables are defined:
%    \begin{macrocode}
\begin{qstest}{\SavedValue failure}{\SavedValue,fails}
  \Expect{Whatever}\SavedValue{\InternalSetValue}
  \Expect[\IncludeTests]{Whatever else}\SavedValue{\IncludeTests}
  \Expect{2.71828}\SavedValue{whatever}
\end{qstest}
%    \end{macrocode}
% 
%
% \subsection{Checking for call sequences}
% \DescribeEnv{ExpectCallSequence} The environment
% |ExpectCallSequence| tells the test system that macros are going to
% be called in a certain order and with particular types of arguments.
%
% It gets as an argument the expected call sequence.  The call
% sequence contains entries that look like a macro definition:
% starting with the macro name followed with a macro argument list and
% a brace-enclosed substitution text that gets executed in place of
% the macro.  The argument list given to this macro substitution will
% get as its first argument a macro with the original definition of
% the control sequence, so you can get at the original arguments for
% this particular macro call starting with |#2|.  As a consequence, if
% you specify no arguments at all and an empty replacement text for
% the substitution, the original macro gets executed with the original
% arguments.
%
% \DescribeMacro{\CalledName} If you want to get back from the control
% sequence with the original meaning in |#1| to the original macro
% name, you can use \cmd{\CalledName} on it.  This will expand to the
% original control sequence \emph{name}, all in printable characters
% fit for output or typesetting in a typewriter font (or use in
% \cmd{\csname}), but without leading backslash character.  You can
% get to the control sequence itself by using
% \begin{quote}
%   |\csname \CalledName#1\endcsname|
% \end{quote}
% and to a printable version including backslash by using
% \begin{quote}
%   |\expandafter \string \csname \CalledName#1\endcsname|
% \end{quote}
%
% Going into more detail, a substitution function is basically defined
% using
% \begin{quote}
%   |\protected| |\long| |\def|
% \end{quote}
% so it will not usually get expanded except when hit with
% \cmd{\expandafter} or actually being executed.  Note that you can't
% use this on stuff that has to work at expansion time.  This really
% works mainly with macros that would also be suitable candidates for
% \cmd{\DeclareRobustCommand}.
%
% It is also a bad idea to trace a conditional in this manner: while
% the substitution could be made to work when being executed, it will
% appear like an ordinary macro when being skipped, disturbing the
% conditional nesting.
%
% Only macros occuring somewhere in the call sequence will get
% tracked, other macros are not affected.  The environment can
% actually get nested, in which case the outer sequences will get
% tracked independently from the inner sequence.
%
% This makes it possible to use |ExpectCallSequence| in order to
% spoof, for example, both input consuming and output producing macros
% without knowing the exact relationship of both.
%
% Apart from specifying macro calls, the call sequence specification
% can contain special characters that also carry meaning:
% \begin{description}
% \item[\texttt{\string`}] If this is set in the call sequence, it
%   places the initial parsing state here.  This will make it an error
%   if non-matching entries occur at the start of the sequence, which
%   otherwise is effectively enclosed with
%   \begin{quote}
%     |.{}*(|\meta{sequence}|).{}*|
%   \end{quote}
%   meaning that nonmatching entries before the first and after the
%   last matching item of the sequence are ignored by default (this
%   makes it closer to normal regexp matchers).  Since the matching
%   will then start at |`|, you can put macros before that position
%   that you want to be flagged if they occur in the sequence, even
%   when they are mentioned nowhere else (macros which would be an
%   error if actually called).  Also available as the more customary
%   |^| character, but that tends to behave worse in \LaTeX-aware
%   editors.
% \item[\texttt{\string'}] This indicates the last call sequence
%   element to be matched.  If any traced macros appear after this
%   point, an error will get generated.  Any immediately following
%   call sequence entries will not get reached.
% \item[|.|] A single dot indicates a wildcard: any of the tracked
%   control sequences might occur here.  You still have to follow this
%   with macro arguments and a braced replacement text.  Wildcards are
%   considered as a fallback when nothing else matches.
% \item[|(|\dots|)|] Parens may be used for grouping alternatives
%   and\slash or combining items for the sake of repeating
%   specifications, of which there are three:
% \item[|?|] If a question mark follows either a macro call, wildcard
%   call, parenthesized group, or call sequence end, the item before
%   it is optional.
% \item[|+|] A plus sign following an item means that this item may be
%   repeated one or more times.
% \item[|*|] An asterisk following an item means that this item may be
%   repeated zero or more times.
% \item[\texttt{\string|}] A vertical bar separates alternatives.
%   Alternatives extend as far as possible, to the next bar, to an
%   enclosing paren group, or to the start and\slash or end of the
%   whole call sequence specification if nothing else intervenes.
% \end{description}
% Note that opposed to traditional regexp evaluation, no backtracking
% is employed: at each point in the call sequence, the next match is
% immediately chosen and a choice can (for obvious reasons) not be
% reverted.  It is the task of the user to specify a call sequence in
% a sufficiently non-ambiguous manner that will make the call sequence
% tracing not pick dead ends.
%    \begin{macrocode}
\begin{qstest}{ExpectCallSequence}{ExpectCallSequence}
  \def\e{e} \def\f{f}
  \def\g{g} \def\h{h}
  \begin{ExpectCallSequence}{`\e#1{%
        \Expect\expandafter{\csname\CalledName#1\endcsname}{\e }%
        \Expect*{\meaning#1}{macro:->e}}+\f#1{}'}
    \e \e \e \e \f
  \end{ExpectCallSequence}
\end{qstest}
%    \end{macrocode}
% 
% \subsection{Ending a standalone test file}
% One finishes a standalone test file by calling the \LaTeX\ control
% sequence \cmd{\quit}.  This stops processing even when we did not
% actually get into a document.  We don't actually do this here since
% there will be further tests in the full documentation file.
% However, we will now close the log file we opened for this demonstration.
%    \begin{macrocode}
\LogClose{lgout}
%</test>
%    \end{macrocode}
% \IfFileExists{qstest-qs.lgout}{%
%   And now we will show the resulting standalone log file:
%   \IndexInput{qstest-qs.lgout}}{%
%   \GenericError{(\jobname) }%
%   {`qstest-qs.lgout' is missing}
%   {Please run `qstest-qs.tex' (unpacked by `qstest.ins') through LaTeX first.}
%   {Documentation will be incomplete otherwise.}}
% 
% We can now stop skipping if we are compiling the |dtx| file
% standalone.
%    \begin{macrocode}
%<*dtx>
\fi
%</dtx>
%    \end{macrocode}
% \StopEventually{}
% \section{The driver file}
%    \begin{macrocode}
%<*driver>
\documentclass{ltxdoc}
\usepackage{qstest}
\usepackage{hyperref}
\OnlyDescription
%<driver> \AlsoImplementation
\begin{document}
\GetFileInfo{qstest.sty}
\date{\filedate}
\title{\texttt{\filename}\\\fileinfo\\version \fileversion}
\author{David Kastrup\thanks{\href{mailto:dak@gnu.org}
    {David.Kastrup@QuinScape.de}, \href{http://quinscape.de}{QuinScape
      GmbH}}}
\maketitle
\DocInput{qstest.dtx}
\end{document}
%</driver>
%    \end{macrocode}
% \hypertarget{installer}{%
% \section{The installer file}
% }
% If you did not get an installer file with the package, you can
% recreate it by running
% \begin{quote}
%   |tex docstrip|
% \end{quote}
% and specifying |dtx| as input extension, |ins| as output extension,
% |installer| as option list and |qstest| as input file name.
%
% Installations with a non-e\TeX-based \LaTeX\ can try to remove the
% |etex| option from the style, but it will impact robustness and
% performance of the package.
%
% When called from a Makefile, you want to allow overwriting files,
% and you don't want to install into the final target tree.  In this
% case, call
% \begin{quote}
%   |tex "\let\Make=y \input makematch.ins"|
% \end{quote}
%    \begin{macrocode}
%<*installer>
\input docstrip
\ifx\Make y\askforoverwritefalse\fi
\generate{
  \file{qstest.drv}{\from{qstest.dtx}{driver,test,etex}}
  \file{qstest-qs.tex}{\from{qstest.dtx}{test,etex}}
  \file{makematch.drv}{\from{makematch.dtx}{driver,etex}}
  \file{makematch-qs.tex}{\from{makematch.dtx}{test,etex}}
  \ifx\Make y\else \usedir{tex/latex/qstest}\fi
  \file{qstest.sty}{\from{qstest.dtx}{package,etex}}
  \file{makematch.sty}{\from{makematch.dtx}{package,etex}}}
\endbatchfile
%</installer>
%    \end{macrocode}
%
% \section{The Implementation}
% \subsection{Front matter}
% Some data and version magic from SVN keyword expansion.
%    \begin{macrocode}
%<*package>
\NeedsTeXFormat{LaTeX2e}
\def\next$Id: #1.dtx #2 #3-#4-#5 #6${%
  \ProvidesPackage{#1}[#3/#4/#5 1.#2 QuinScape Unit Test Package]
}
\next
$Id: qstest.dtx 7896 2007-02-21 14:03:26Z dkastrup $
\RequirePackage{makematch}
\newtoks\qst@tmptoks
%    \end{macrocode}
%
% \subsection{Error logging and treatment}
% \begin{macro}{\TestErrors}
%   This defines test patterns that will throw an error when failing.
%    \begin{macrocode}
\newcommand*{\TestErrors}{\MakeMatcher[,]\qst@errorcheck}
\TestErrors{*, !fails}
\newif\ifqst@error
\def\qst@ifqst@error{\qst@errorcheck\qst@options
  \qst@errortrue\qst@errorfalse\ifqst@error}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\qst@failed}
%   This is the internal macro we call for every failure.  It gets the
%   test message which is expanded and then sanitized.
%    \begin{macrocode}
\long\def\qst@error#1{%
  \global\qst@testpassedfalse
  \global\let\qst@lastfailure\qst@testname
  \edef\qst@message{Failed: \qst@testname^^J#1}%
  \@onelevel@sanitize\qst@message
  \qst@failed}
%    \end{macrocode}   
% \end{macro}
% \begin{macro}{\ifqst@testpassed}
%   This is used to flag failures in a test.
%    \begin{macrocode}
\newif\ifqst@testpassed
%    \end{macrocode}
% \end{macro}
% 
% \subsection{Logging}
% \label{sec:logging}
% \begin{macro}{\LogTests}
%   This macro receives three arguments.  The first is the filename
%   extension of a log file.  The second is a keyword list that
%   indicates which passed tests are to be logged.  The third is a
%   keyword list indicating which failed tests are to be logged.
%    \begin{macrocode}
\newcommand{\LogTests}[3]{%
%<etex>  \ifcsname qst:log:#1\endcsname \else
%<*!etex>
  {\expandafter}\expandafter\ifx\csname qst:log:#1\endcsname
      \@undefined
%</!etex>
    \expandafter\newwrite\csname qst:log:#1\endcsname
    \qst@gpush\qst@passed{\qst@logentry+{#1}}%
    \qst@gpush\qst@failed{\qst@logentry-{#1}}%
    \global\expandafter\let\csname qst:+log:#1\endcsname\qst@matchnever
    \global\expandafter\let\csname qst:-log:#1\endcsname\qst@matchnever
  \fi
  \expandafter\ifx \csname qst:+log:#1\endcsname \qst@matchnever
    \PackageInfo{qstest}{Logging on: \jobname.#1}%
    \ifnum\csname qst:log:#1\endcsname>\m@ne
      \immediate\openout\csname qst:log:#1\endcsname\jobname.#1\relax
    \fi
  \fi
  \MakeMatcher[,]\qst@tmp{#2}%
  \global\expandafter\let\csname qst:+log:#1\endcsname\qst@tmp
  \MakeMatcher[,]\qst@tmp{#3}%
  \global\expandafter\let\csname qst:-log:#1\endcsname\qst@tmp
}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\qst@gpush}
%    \begin{macrocode}
%<*etex>
\long\def\qst@gpush#1#2{\xdef#1{\unexpanded{#2}%
    \unexpanded\expandafter{#1}}}
%</etex>
%<*!etex>
\long\def\qst@gpush#1#2{\qst@tmptoks{#2}%
  \qst@tmptoks\expandafter{\the\expandafter\qst@tmptoks#1}%
  \xdef#1{\the\qst@tmptoks}}
%</!etex>
%    \end{macrocode}
% \end{macro}
% 
% \begin{macro}{\qst@logentry}
%   \begin{macrocode}
\def\qst@logentry#1#2{\qst@maybelog#1{#2}{%
  \immediate\write\csname qst:log:#2\endcsname{\qst@message}}}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\qst@maybelog}
%   \begin{macrocode}
\def\qst@maybelog#1#2#3{\csname qst:#1log:#2\endcsname\qst@options
  {#3}{}}
%    \end{macrocode}
% \end{macro}
% If the user specifies |log| as the extension, we don't want to
% overwrite the log file.  Instead we convert this to package warnings
% and infos.
%    \begin{macrocode}
\expandafter\let\csname qst:log:log\endcsname\m@ne
\global\expandafter\let\csname qst:+log:log\endcsname\qst@matchalways
\global\expandafter\let\csname qst:-log:log\endcsname\qst@matchalways
\def\qst@passed{\qst@maybelog+{log}%
                              {\PackageInfo{qstest}{\qst@message}}}
\def\qst@failed{\ifqst@error
    \PackageError{qstest}{\qst@message}{}%
  \else
    \qst@maybelog-{log}{\PackageWarning{qstest}{\qst@message}}%
  \fi}
%    \end{macrocode}
% \begin{macro}{\LogClose}
%   This closes the specified log file again.  This is needed if the
%   log file gets processed during the \TeX\ run, like with verbatim
%   input or by running a |\write18| process on it.  It is possible to
%   reopen the file later.  Specifying |log| will not actually close
%   the log file, but just stop logging.
%    \begin{macrocode}
\newcommand*\LogClose[1]{%
  \expandafter\ifx \csname qst:+log:#1\endcsname\qst@matchnever
  \else
    \PackageInfo{qstest}{Logging off: \jobname.#1}%
    \ifnum\csname qst:log:#1\endcsname>\m@ne
      \immediate\closeout\csname qst:log:#1\endcsname
    \fi
    \global\expandafter\let\csname qst:+log:#1\endcsname\qst@matchnever
    \global\expandafter\let\csname qst:-log:#1\endcsname\qst@matchnever
  \fi
}
%</package>
%<*test>
\IncludeTests{*}
\makeatletter
\begin{qstest}{\LogClose}{}
\begin{ExpectCallSequence}{%
    `\PackageInfo#1#2#3{\Expect[##1]{#2}{qstest}%
      \Expect[##2]{#3}{Logging off: \jobname.log}%
      #1{#2}{#3}}'}
  \LogClose{log}
\end{ExpectCallSequence}
\end{qstest}
\begin{qstest}{\LogTests}{}
\begin{ExpectCallSequence}{%
    \PackageInfo#1#2#3{\Expect[##1]{#2}{qstest}%
      \Expect[##2]{#3}{Logging on: \jobname.log}%
      #1{#2}{#3}}}
  \LogTests{log}{*}{*}
\end{ExpectCallSequence}
\end{qstest}
%</test> 
%<*package>
%    \end{macrocode}
% \end{macro}
% 
% \subsection{The test code itself}
% 
% \begin{macro}{\IncludeTests}
%   This defines the test case patterns to be included.  Keyword
%   specifications and patterns are `sanitized': macros are not
%   expanded, and everything but spaces is converted to catcode~12
%   characters.  At the start of a pattern or a keyword, spaces get
%   ignored.  Spaces inside of patterns or keywords should work as
%   expected, however.
%    \begin{macrocode}
\def\IncludeTests{\MakeMatcher[,]\qst@includecheck}
\let\qst@includecheck\qst@matchalways
%    \end{macrocode}
% \end{macro}
% \begin{environment}{qstest}
%   This is the environment for defining a test.  |#1| is the name of
%   the test for the log file.  The name is sanitized, so control
%   sequence names can be used verbatim.  |#2| is a sequence of
%   options that may be matched by the patterns from
%   \cmd{\IncludeTests}.  If there is no match the environment is
%   skipped like a comment environment.
%    \begin{macrocode}
\RequirePackage{verbatim}
\newenvironment{qstest}[2]{%
%    \end{macrocode}
% We sanitize test name and options.  In case people nest tests, we
% don't want to announce an outer test passed when a single inner test
% has passed.  So we don't set \cmd{\qst@testpassedtrue} globally.
% While a mixture of local and global assignments should in general be
% avoided as it leads to ``savestack buildup'', this can't actually
% happen here since the local assignment is done only once at the
% start of a group.
%    \begin{macrocode}
  \qst@testpassedtrue
%<etex> \edef\qst@testname{\detokenize{#1}}%
%<*!etex>
  \qst@tmptoks{#1}%
  \edef\qst@testname{\the\qst@tmptoks}%
  \@onelevel@sanitize\qst@testname
%</!etex>
  \MakeMatchTarget[,]\qst@options{#2}%
  \let\ifqst@error\qst@ifqst@error
  \qst@includecheck\qst@options\ignorespaces{%
    \let\endqstest\endcomment}}%
  {\ifqst@testpassed
     \edef\qst@message{Passed: \qst@testname}%
     \qst@passed
   \else
     \ifx\qst@testname\qst@lastfailure
     \else
       \edef\qst@message{Failed: \qst@testname}%
       \qst@failed
     \fi
  \fi}
%    \end{macrocode}
% \end{environment}
% \begin{macro}{\qst@testname}
%   Let us set up a default test name in case any tests occur outside
%   of a |qstest| environment.
%    \begin{macrocode}
\def\qst@testname{unspecified}
%    \end{macrocode}
% \end{macro}
% 
% \begin{macro}{\Expect}
%   This macro basically receives two brace-delimited
%   arguments\footnote{Actually, the arguments are collected with a
%     token register assignment.  This gives several options for
%     specifying them, including giving a token register without
%     braces around it.} and checks that they are equal after being
%   passed through \cmd{\def} and sanitized.
%   If you precede one of those arguments
%   with |*| it gets passed through through \cmd{\edef} instead of
%   \cmd{\def}.  There may also be additional tokens like
%   |\expandafter| before the opening brace.
%    \begin{macrocode}
\newcommand\Expect[1][]{%
%<etex> \edef\qst@tmpc{\unexpanded{#1}}%
%<!etex> \qst@tmptoks{#1}%
%<!etex> \edef\qst@tmpc{\the\qst@tmptoks}%
  \qst@expectarg\qst@defaultvalue\qst@expecttwo}
\def\qst@expectarg#1#2{%
  \@ifstar{\qst@expectargii\edef#1#2}{\qst@expectargii\def#1#2}}
\def\qst@expectargii#1#2#3{\long\def\qst@tmp##1{%
    #1#2####1####2####3####4####5####6####7####8####9{##1}%
    \@onelevel@sanitize#2#3}%
  \afterassignment\qst@expectargiii
  \qst@tmptoks=}
\def\qst@expectargiii{\expandafter
  \qst@tmp\expandafter{\the\qst@tmptoks}}
\def\qst@expecttwo{%
  \ifx\qst@tmpc\@empty
    \edef\qst@tmpc{\the\qst@tmptoks}%
  \fi
  \qst@expectarg\qst@tmpb\qst@expectfinish}
\def\qst@expectfinish{%
  \ifx\qst@defaultvalue\qst@tmpb
  \else
%<!etex>    \qst@tmptoks\expandafter{\qst@tmpc}%
    \qst@error{
%<!etex>    \string\Expect: \the\qst@tmptoks^^J
%<etex>    \string\Expect: \unexpanded\expandafter{\qst@tmpc}^^J
      <\qst@tmpb^^J
      >\qst@defaultvalue}%
  \fi}
%    \end{macrocode}
% \end{macro}
%
% \subsection{Dimension ranges}
%
% \begin{macro}{\InRange}
%   This is used as a second argument for \cmd{\Expect}.  It will
%   make \cmd{\Expect} succeed if the first argument of \cmd{\Expect}
%   happens to lie in the closed range defined by the two arguments of
%   \cmd{\InRange}.
%    \begin{macrocode}
\def\InRange#1#2{%
  \ifcase
    \ifdim\qst@defaultvalue<#1\@ne\fi
    \ifdim\qst@defaultvalue>#2\@ne\fi
    \tw@
  \or
    \qst@afterfi{{in [#1..#2]}}%
  \or
    \qst@afterfi{\expandafter{\qst@defaultvalue}}%
  \fi}
%    \end{macrocode}
% \begin{macro}{\qst@afterfi}
%   This is just a helper macro cleaning up a following |\fi|.
%    \begin{macrocode}
\def\qst@afterfi#1#2\fi{\fi#1}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \begin{macro}{\NearTo}
%   This is a pseudovalue like the last: it returns
%   \cmd{\qst@defaultvalue} if the specified value |#1| is close to
%   the given default value.  There is an optional argument specifying
%   the closeness which defaults to |0.05pt|.  It requires e\TeX\
%   since the arithmetic can't be done otherwise.
%    \begin{macrocode}
%<*etex>
\newcommand*\NearTo[1]{%
  \ifx[#1\expandafter\qst@nearto\expandafter[%]]
  \else \qst@afterfi{\qst@nearto[0.05pt]{#1}}%
  \fi}
\def\qst@nearto[#1]#2{%
  \ifcase
    \ifdim\qst@defaultvalue>\dimexpr#2+(#1)\relax \@ne\fi
    \ifdim\qst@defaultvalue<\dimexpr#2-(#1)\relax \@ne\fi
    \tw@
  \or
    \qst@afterfi{{near[#1] to #2}}%
  \or
    \qst@afterfi{\expandafter{\qst@defaultvalue}}%
  \fi}
%</etex>
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\ExpectIfThen}
%   This is used for evaluating a condition as provided by the
%   |ifthen| package.  See its docs for the kind of condition that is
%   possible there.
%    \begin{macrocode}
\newcommand\ExpectIfThen[1]{%
%<!etex>  \qst@tmptoks{#1}%
  \ifthenelse{#1}{}{%
    \qst@error{
%<etex> \string\ExpectIfThen: \unexpanded{#1}%
%<!etex> \string\ExpectIfThen: \the\qst@tmptoks
  }}}
%    \end{macrocode}
% \end{macro}
% 
% 
% \begin{environment}{ExpectCallSequence}
%   This tells the test system that macros are going to be called in a
%   certain order and with particular types of arguments.
%
%   The environment gets as an argument the expected call sequence.
%   The call sequence contains entries that look like a macro
%   definition: starting with the macro name followed with an argument
%   list ended with |{| ^^A}%
%   following it, followed by substitution code executed in place of
%   the macro.  The argument list actually starts with an implicit
%   argument of |#1| which contains a macro with the original value of
%   the control sequence, so the explicitly specified argument list
%   starts with the argument called~|#2|.
%
%   The substitution function is basically defined using
%   \begin{quote}
%     |\protected| |\long| |\def|
%   \end{quote}
%   so it will not usually get expanded except when hit with
%   \cmd{\expandafter} or actually being executed.  Note that you
%   can't use this on stuff that has to work at expansion time.  This
%   really works mainly with macros that would also be suitable
%   candidates for \cmd{\DeclareRobustCommand}.
%
%   It is also a bad idea to trace a conditional in this manner: while
%   the substitution should actually work when being executed, it will
%   appear like an ordinary macro when being skipped, disturbing the
%   conditional nesting.
% \begin{macro}{\qst@advance}
%   We maintain a lot of counters and often need them expanded.
%   Instead of allocating counter registers for them, we keep some of
%   them in macros.  Advancing such a macro is done using
%   \cmd{\qst@advance}.  Since we may do this in the middle of call
%   tracing, we allocate our own temporary counter in the non-e\TeX\
%   case.
%    \begin{macrocode}
%<etex> \def\qst@advance#1{\edef#1{\number\numexpr(#1)+1}}
%<*!etex>
\newcount\qst@tmpcnt
\def\qst@advance#1{%
  \qst@tmpcnt#1%
  \advance\qst@tmpcnt\@ne
  \edef#1{\number\qst@tmpcnt}}
%</!etex>
%    \end{macrocode}
% \end{macro}
% 
% \subsection{The regexp state machine}
% The whole idea of call sequence checking is to match the calls
% happening throughout controlled macros to a sort of attributed
% regular expression.  To facilitate that, we replace the macros by
% some fixed code exercising a state machine.  For each state of the
% state machine, we define a state macro (taking one argument) that
% contains tokens to be matched followed by a corresponding action
% sequence in braces.  The argument that this state macro takes is the
% control sequence in question itself: by using |#1| as the matching
% token, one can ensure a match at some place.  This is used for
% implementing wildcards.
%
% An action sequence may be of three kinds:
% \begin{description}
% \item[explicit match] this matches a given token explicitly and
%   causes the state to change to a defined new state, and causes an
%   action to be called that has been user specified for this state transition.
% \item[wildcard match] instead of immediately making a state transition,
%   the transition is remembered in case there is not explicit match:
%   explicit matches have priority.
% \item[empty transition] this inserts the transitions of a different
%   state recursively into the matching process.  Every state inserted
%   in this manner is recorded so as to not insert it again.  This is
%   not associated with a transition.
% \end{description}
% 
% \begin{macro}{\qst@csmaketransition}
%   This will perform an actual transition when called as an action
%   code.  It receives in |#1| the state to move to, in |#2| the
%   transition number to use for the replacement code, in |#3| the
%   code sequence to be replaced.  Everything until the terminating
%   |.| of the expanded transition table can be thrown away.
%    \begin{macrocode}
\long\def\qst@csmaketransition#1#2#3#4.{%
  \qst@cssetstate{#1}%
  \expandafter
  \endgroup
  \csname qst@cstrans:#2\expandafter\endcsname
  \csname qst@cssaved\romannumeral\qst@csscope>\string#3\endcsname}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\CalledName}
%   This is used for getting back the original name from the saved
%   sequence name as text.
%    \begin{macrocode}
\def\CalledName#1{\expandafter\expandafter\expandafter\@gobble
  \expandafter\strip@prefix\string#1}
%    \end{macrocode}
% \end{macro}
% 
% \begin{macro}{\qst@csstate}
%    \begin{macrocode}
\def\qst@csstate{\csname qst@csstate\romannumeral
  \qst@csscope\endcsname}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{qst@cssetstate}
%    \begin{macrocode}
\def\qst@cssetstate#1{%
  \expandafter\expandafter\expandafter\xdef\qst@csstate{#1}}
%    \end{macrocode}
% \end{macro}
% 
% \begin{macro}{\qst@csmakewildcard}
%   This matches a wildcard.  Since those are considered last, it just
%   redefines \cmd{\qst@csnomatch} to a different default behavior when
%   nothing matched explicitly.  It also removes the replicated
%   control sequence name in |#3| and restarts the matching process.
%   Wildcards don't match the end of a match.
%    \begin{macrocode}
\long\def\qst@csmakewildcard#1#2#3{\ifx#3\endExpectCallSequence
  \else
    \def\qst@csnomatch{\qst@csmaketransition{#1}{#2}}%
  \fi
  \qst@tmp}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\qst@cscheckempty}
%   This first checks whether the current state has already been
%   considered (entering it into \cmd{\qst@lockout} if it has not),
%   then expands its table here and resumes the search.
%    \begin{macrocode}
\long\def\qst@cscheckempty#1#2{%
  \ifcase\qst@cslockout{#1}\z@
    \expandafter\def\expandafter\qst@cslockout
    \expandafter##\expandafter1\expandafter{%
      \qst@cslockout{##1}\ifnum##1=#1\@ne\fi}%
    \expandafter\expandafter\expandafter\qst@tmp
    \csname qst@csstate:#1\expandafter\endcsname\expandafter#2%
  \or \expandafter\qst@tmp
  \fi}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\qst@csnext}
%   This does the work of finding a transition from the current state
%   given a specified lookahead token.  It does this via defining
%   \cmd{\qst@tmp} to a macro picking out the given token from the
%   following string, taking the corresponding sequence to be called
%   for it and calling it with the token as an argument.
%
%   The lockout sequence in \cmd{\qst@cslockout} is preloaded with one
%   comparison locking out the current state.
%    \begin{macrocode}
\long\def\qst@csnext#1#2{%
  \begingroup
  \edef\qst@csscope{#1}%
  \let\qst@csnomatch=\qst@csunexpected
  \def\qst@cslockout##1{\ifnum\qst@csstate=##1\@ne\fi}%
  \long\def\qst@tmp##1#2##2{##2#2}%
  \expandafter\expandafter\expandafter\qst@tmp
  \csname qst@csstate:\qst@csstate\endcsname#2%
  #2{\qst@csnomatch}.}
%<*!etex>
\let\qst@csnextii\qst@csnext
\def\qst@csnext{\ifx\protect\@typeset@protect
  \expandafter\qst@csnextii
  \else \expandafter \@firstoftwo \expandafter \protect
  \fi}
%</!etex>
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\qst@csunexpected}
%   This is the default if we have had no match:
%    \begin{macrocode}
\long\def\qst@csunexpected#1#2.{%
  \qst@error{
    ExpectCallSequence: \string#1}%
    \expandafter\expandafter\expandafter
  \endgroup
  \qst@cssavedcs#1%
}
\long\def\qst@cssavedcs#1{%
  \csname qst@cssaved\romannumeral\qst@csscope>\string#1\endcsname}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\qst@csaddstate}
%   This does the actual work of adding something to the state table.
%   Uses \cmd{\def}.
%    \begin{macrocode}
\long\def\qst@csaddstate#1#2{%
%<etex>  \ifcsname qst@csstate:#1\endcsname \else
%<!etex>    \expandafter\ifx\csname qst@csstate:#1\endcsname\relax
    \expandafter\let\csname qst@csstate:#1\endcsname \@gobble
  \fi
  \long\expandafter
  \def\csname qst@csstate:#1\expandafter\endcsname
  \expandafter##\expandafter1\expandafter{\romannumeral
    \expandafter\expandafter\expandafter\z@
    \csname qst@csstate:#1\endcsname{##1}#2}}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\qst@csaddempty}
%    \begin{macrocode}
\def\qst@csaddempty#1#2{%
  \expandafter\qst@csaddstate\expandafter{\number#1\expandafter}%
  \expandafter{\expandafter##\expandafter1\expandafter{\expandafter
      \qst@cscheckempty\expandafter{\number#2}}}}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\qst@csallocstate}
% \begin{macro}{\qst@csalloctrans}
%   Those maintain the currently available next state, and the
%   currently available next transition.
%    \begin{macrocode}
\def\qst@csallocstate{0}
\def\qst@csalloctrans{0}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \begin{macro}{\qst@csscope}
%   When we are nesting |ExpectCallSequence| environments,
%   this keeps track of the scope we are in.
%    \begin{macrocode}
\def\qst@csscope{0}
%    \end{macrocode}
% \end{macro}
%    \begin{macrocode}
\newenvironment{ExpectCallSequence}[1]
{%
  \qst@advance\qst@csscope
  \qst@cssetstate{\qst@csallocstate}%
  \let\qst@csgroupstate\qst@csallocstate
  \qst@advance\qst@csgroupstate
  \qst@advance\qst@csgroupstate
  \let\qst@csstack\@empty
  \qst@csparse.{}*(#1){...}%
}{%
  \def\qst@cssavedcs{\@gobble}%
  \expandafter\qst@csnext\expandafter\qst@csscope
  \csname end {ExpectCallSequence}\endcsname}
%    \end{macrocode}
% \end{environment}
% \begin{macro}{\qst@csparse}
%   This is doing the basic parsing.  We are having some problems
%   stopping non-e\TeX\ from hitting on the string space.  This
%   approach will not work with implicit characters like
%   \cmd{\bgroup}, but then there are not too many of those around,
%   and so the impact on string space should be tolerable.
%    \begin{macrocode}
\long\def\qst@csparse#1{%
%<etex>  \ifcsname qst@csparse:\string#1\endcsname
%<*!etex>
  \ifcase
    \ifcat\relax\noexpand#1%
    \else
      \expandafter \ifx \csname qst@csparse:\string#1\endcsname \relax
      \else @ne \fi
    \fi \m@ne
  \or
%</!etex>
    \csname qst@csparse:\string#1\expandafter\expandafter\expandafter
    \endcsname
    \expandafter\@gobble
  \else
    \expandafter\qst@csparsedefault
  \fi{#1}}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\qst@csparse:...}
%   This is what we do at the end of the patterns: we just jump to
%   state~0.  At state~0 we add a wildcard restoring any remaining
%   macro redirection when it occurs, and let the end of the call
%   sequence be allowed there to move to state~1.  Oh, and we actually
%   call the macro then.
%    \begin{macrocode}
\expandafter\def\csname qst@cstrans:0\endcsname
  #1{\expandafter\let\csname\CalledName#1\endcsname= #1%
    \let#1=\@undefined
    \csname\CalledName#1\endcsname}
\qst@csaddstate0{#1{\qst@csmakewildcard00}}
\qst@csaddempty{0}{1}
\expandafter\qst@csaddstate\expandafter1\expandafter{%
  \csname end {ExpectCallSequence}\endcsname{\qst@csmaketransition21}}
\expandafter\let\csname qst@cstrans:1\endcsname\@gobble

\def\qst@csalloctrans{2}
\def\qst@csallocstate{3}

\expandafter\let\csname end {ExpectCallSequence}\endcsname
  \endExpectCallSequence

\expandafter\def\csname qst@csparse:...\endcsname{%
  \ifx\qst@csstack\@empty
  \else
    \PackageError{qstest}{Unmatched `(' in call sequence %)
      specification}{You need to fix this}%
    \loop
      \qst@csstack
    \ifx\qst@csstack\@empty
    \else
    \repeat
  \fi
  \qst@csaddempty{\qst@csallocstate}{0}%
  \qst@advance\qst@csallocstate
  \ignorespaces}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\qst@csparsedefault}
%   Ok, here is the default action.  We resolve any pending state to
%   the next available state and set \cmd{\qst@cslaststate} accordingly.
%   Then we add a pending transition from the last state to the next
%   state.  The saved definition is not overwritten if the macro
%   itself already has the proper setting.  The purpose of that is to
%   be able to preserve undefined macros.
%    \begin{macrocode}
\long\def\qst@csparsedefault#1{%
%<*etex>
  \ifcsname qst@cssaved\romannumeral\qst@csscope>\string#1\endcsname
  \else \protected
%</etex>
%<*!etex>
  {\expandafter}%
  \expandafter\ifx\csname qst@cssaved\romannumeral\qst@csscope>%
    \string#1\endcsname \@undefined
%</!etex>
    \edef\qst@tmp{\noexpand\qst@csnext \qst@csscope \noexpand#1}%
    \ifx#1\qst@tmp
    \else
      \expandafter\let
         \csname qst@cssaved\romannumeral\qst@csscope>\string#1\endcsname
       = #1%
      \let#1\qst@tmp
    \fi
  \fi
  \qst@csparsetransition{#1}\qst@csmaketransition}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\qst@csparsetransition}
%   Ok, here we read in the code for an actual transition.  This will
%   create a new definition using \cmd{\def}.
%    \begin{macrocode}
\long\def\qst@csparsetransition#1#2{%
  \let\qst@cslaststate\qst@csallocstate
  \qst@advance\qst@csallocstate
  \long\edef\qst@tmp##1##2{%
    \noexpand\qst@csaddstate{\qst@cslaststate}{%
      ##1{%
        ##2{\qst@csallocstate}%
        {\qst@csalloctrans}}}}%
  \qst@tmp{#1}{#2}%
  \expandafter\qst@advance\expandafter\qst@csalloctrans
  \expandafter\afterassignment\expandafter\qst@csparse
  \expandafter\long\expandafter\def
    \csname qst@cstrans:\qst@csalloctrans\endcsname}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\qst@csparse:.}
%    \begin{macrocode}
\expandafter\def\csname qst@csparse:.\endcsname{%
  \qst@csparsetransition{##1}\qst@csmakewildcard}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\qst@csparse:?}
%   This turns the last element into an optional element.
%    \begin{macrocode}
\expandafter\def\csname qst@csparse:?\endcsname{%
  \qst@csensurelaststate?%
  \qst@csaddempty\qst@cslaststate\qst@csallocstate
  \let\qst@cslaststate\@undefined
  \qst@csparse}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\qst@csensurelaststate}
%   This checks that we have a valid last state to hook onto.  There
%   is no really useful error recovery if we haven't.
%    \begin{macrocode}
\def\qst@csensurelaststate#1{\ifx\qst@cslaststate\@undefined
    \PackageError{qstest}{Unexpected `#1' in call sequence}{%
    Expect chaos to ensue}%
    \def\qst@cslaststate{0}%
  \fi}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\qst@csparse:*}
%   This would need to make the pending state identical with the
%   previous state while leaving all of it pending.  But we can't
%   retroactively make previous states pending again, so we instead
%   make do with adding an empty transition from the previous state to
%   the next pending one.
%    \begin{macrocode}
\expandafter\def\csname qst@csparse:*\endcsname{%
  \qst@csensurelaststate*%
  \qst@csaddempty\qst@csallocstate\qst@cslaststate
  \qst@advance\qst@csallocstate
  \qst@csaddempty\qst@cslaststate\qst@csallocstate
  \let\qst@cslaststate\@undefined
  \qst@csparse}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\qst@csparse:+}
%   This is somewhat similar.  Note that we have to add an empty
%   transition at the end (like with |*| previously) to make sure that
%   something like |\a{}+\b{}+| does not match |\a\b\a|.
%    \begin{macrocode}
\expandafter\def\csname qst@csparse:+\endcsname{%
  \qst@csensurelaststate+%
  \qst@csaddempty\qst@csallocstate\qst@cslaststate
  \let\qst@cslaststate\qst@csallocstate
  \qst@advance\qst@csallocstate
  \qst@csaddempty\qst@cslaststate\qst@csallocstate
  \let\qst@cslaststate\@undefined
  \qst@csparse}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\qst@csparse:(}^^A%{)}
%   Ok, now we are getting into grouping.  This adds a bit of
%   complexity, but it is actually rather containable (took a lot of
%   work, though).
%    \begin{macrocode}
\expandafter\def\csname qst@csparse:(\endcsname{%
%<!etex>  \qst@tmptoks\expandafter{\qst@csstack}%
  \edef\qst@csstack{\def\noexpand\qst@csstack{%
%<etex>      \unexpanded\expandafter{\qst@csstack}%
%<!etex>      \the\qst@tmptoks
    }%
    \def\noexpand\qst@csgroupstate{\qst@csgroupstate}}%
  \let\qst@csgroupstate\qst@csallocstate
  \qst@advance\qst@csallocstate
  \qst@csaddempty\qst@csgroupstate\qst@csallocstate
  \qst@csparse}
%    \end{macrocode}
% \end{macro}
% \DeleteShortVerb\|
% \begin{macro}{\qst@csparse:|}
%    \begin{macrocode}
\expandafter\def\csname qst@csparse:|\endcsname{%
  \let\qst@cslaststate\qst@csallocstate
%<!etex>  \qst@tmptoks\expandafter{\qst@csstack}%
%<!etex>  \edef\qst@csstack{\the\qst@csstack
%<etex>  \edef\qst@csstack{\unexpanded\expandafter{\qst@csstack}%
    \noexpand\qst@csaddempty{\qst@cslaststate}%
                            \noexpand\qst@csallocstate}%
  \qst@advance\qst@csallocstate
  \qst@csaddempty\qst@csgroupstate\qst@csallocstate
  \let\qst@cslaststate\@undefined
  \qst@csparse}
%    \end{macrocode}
% \end{macro}
% \MakeShortVerb\|
% \begin{macro}{\qst@csparse:)}^^A%{(}
%    \begin{macrocode}
\expandafter\def\csname qst@csparse:)\endcsname{%
  \let\qst@cslaststate\qst@csgroupstate
  \ifx\qst@csstack\@empty
    \PackageError{qstest}{Unmatched `)' in call sequence
      specification}{You need to fix this}%
  \fi
  \qst@csstack
  \qst@csparse
}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\qst@csparse:`}
%   We don't check whether this is actually the first encounter with
%   |`|: we just reset the state machine to come here.
%    \begin{macrocode}
\expandafter\def\csname qst@csparse:`\endcsname{%
  \qst@cssetstate{\qst@csallocstate}%
  \let\qst@cslaststate\@undefined
  \qst@csparse}
\expandafter\let\csname qst@csparse:^\expandafter\endcsname
  \csname qst@csparse:`\endcsname
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\qst@csparse:'}
%    \begin{macrocode}
\expandafter\def\csname qst@csparse:'\endcsname{%
  \qst@csaddempty{\qst@csallocstate}{1}%
  \let\qst@cslaststate\qst@csallocstate
  \qst@advance\qst@csallocstate
  \qst@csparse}
\expandafter\let\csname qst@csparse:$%$
\expandafter\endcsname\csname qst@csparse:'\endcsname
%    \end{macrocode}
% \end{macro}
% Ok, let us test the state machine.  First define two macros that we
% are going to replace:
%    \begin{macrocode}
%</package>
%<*test>
\begin{qstest}{ExpectCallSequence state machine}%
  {ExpectCallSequence,internal}
  \def\foo#1#2#3{\relax\relax}
  \let\fie\relax
%    \end{macrocode}
% The free state table starts at 3, the free transitions at 2.
%    \begin{macrocode}
  \Expect*{\qst@csallocstate}{3}
  \Expect*{\qst@csalloctrans}{2}
%    \end{macrocode}
% Now we have an implicit start into the call sequence that is |.{}*(|
% and thus takes away 3 states and one transition.  The call sequence
% starts off with one ignored entry and then the real state, so we
% expect to be at state~7 initially.
%    \begin{macrocode}
  \begin{ExpectCallSequence}{\fie{}%
      `\foo#1#2#3{#2\bar{#3}}(\bar#1#2{#2}|.#1{})+%
      \foo#1{}}
    \Expect*{\qst@csstate}{7}
    \Expect*{\qst@csallocstate}{15}
%    \end{macrocode}
% The state transitions actually happen before the respective code is
% called, so we can actually continue in the matching sequence while
% still working off the replacement for a macro:
%    \begin{macrocode}
    \foo{\Expect*{\qst@csstate}{8}}{\Expect*{\qst@csstate}{10}}
    \Expect*{\qst@csstate}{10}
%    \end{macrocode}
% \cmd{\fie} will match the wildcard.  Note that we arrive at a
% different target state than previously.  While this is
% counterintuively, we have to be aware that an empty transition from
% state~10 to state~12 exists, so both are actually the same state in
% reality.
%    \begin{macrocode}
    \fie
    \Expect*{\qst@csstate}{12}
%    \end{macrocode}
% Now \cmd{\foo} kicks us out of the matching.  Again, state~14 looks
% strange, but it has an empty transition to state~0, the ``match
% everything until we are finished'' state.
%    \begin{macrocode}
    \foo
    \Expect*{\qst@csstate}{14}
%    \end{macrocode}
% So we actually make use of this state and call \cmd{\fie} after
% which it will have reverted to its original meaning:
%    \begin{macrocode}
    \fie
    \Expect*{\qst@csstate}{0}
    \Expect*{\meaning\fie}*{\meaning\relax}
%    \end{macrocode}
% It is sort of amusing that the above assertion will fail if we write
% just
% \begin{quote}
%   |\Expect*{\meaning\fie}{\relax}|
% \end{quote}
% since the meaning of \cmd{\relax} is not ended with a blank, while
% the printed string of its name does end with one.  We check that use
% of \cmd{\foo} lets us revert its meaning as well.
%    \begin{macrocode}
    \foo\junk\junk\junk
    \Expect*{\qst@csstate}{0}
    \Expect*{\meaning\foo}{macro:#1#2#3->\relax \relax}
  \end{ExpectCallSequence}
\end{qstest}
%</test>
%<*package>
%    \end{macrocode}
% 
% \subsection{Saved results}
%
% The purpose of saved results is to be able to check that the value
% has remained the same over passes.  Results are given a unique label
% name and are written to an auxiliary file where they can be read in
% for the sake of comparison.  One can use the normal |.aux| file for
% this purpose, but it might be preferable to use a separate dedicated
% file.  That way it is possible to input a versioned \emph{copy} of
% this file and have a fixed point of reference rather than the last
% run.
%
% While the |.aux| file is read in automatically at the beginning of
% the document, this does not happen with explicitly named files.  You
% have to read them in yourself, preferably using
% \begin{quote}
%   |\InputIfFileExists|\marg{filename}|{}{}|
% \end{quote}
% so that no error is thrown when the file does not yet exist.
%
% \begin{macro}{\SaveValueFile}
%   This specifies which file name to use for saving results.  If this
%   is specified, a special file is opened.  If one does not specify
%   this, instead the standard |.aux| file is used instead.
%    \begin{macrocode}
\newcommand*\SaveValueFile[1]{%
  \ifnum\qst@savefile=\@auxout
    \newwrite\qst@savefile
  \else
    \immediate\closeout\qst@savefile
  \fi
  \immediate\openout\qst@savefile #1\relax}
\def\qst@savefile{\@auxout}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\CloseValueFile}
%   This is not likely to be used except for testing this package
%   itself: it closes the given file so that it may be read in again
%   immediately.
%    \begin{macrocode}
\newcommand*\CloseValueFile{%
  \ifnum\qst@savefile=\@auxout
  \else
    \immediate\closeout\qst@savefile
  \fi}
%    \end{macrocode}
% \end{macro}
% 
% \begin{macro}{\SaveValue}
%   This gets the label name as first argument (which gets sanitized
%   more or less, depending on whether you use e\TeX\ or not).
%
%   The second argument is the same kind of argument as \cmd{\Expect}
%   expects.
%    \begin{macrocode}
\newcommand\SaveValue[1]{%
%<etex>  \edef\qst@tmpc{\detokenize{#1}}%
%<!etex>  \edef\qst@tmpc{\string#1}%
  \ifnum\qst@savefile=\@auxout
    \ifx\@onlypreamble\AtBeginDocument
    \else
      \PackageError{qstest}{You need to specify \string\SaveValueFile^^J
        for test files without document.}{I can't use
        `\string\SaveValue' before either `\string\begin%
          {document}'^^J
          or `\string\SaveValueFile'}%
    \fi
  \fi
  \qst@expectarg\qst@defaultvalue\qst@saveval}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\qst@saveval}
%   This is tricky: we don't want to turn either |^^M| or |^^J| into
%   each other.  But at least \TeX live will write out |^^J| as a
%   single character (causing a line break) and only |^^M| will
%   actually get escaped.  It would be principally ok to just crank
%   out line feeds unmodified, if only \TeX\ would not strip spaces at
%   the end of a line.  So we go through the string we want to put
%   out, and change the single character |^^J| manually into the three
%   characters |^^J| after which \TeX\ will preserve spaces.
%    \begin{macrocode}
\def\qst@saveval{%
  {\immediate\write\qst@savefile{\string\InternalSetValue^^J%
    \expandafter\qst@cleanlf\qst@tmpc\qst@endcleanlf^^J%
    \expandafter\qst@cleanlf\qst@defaultvalue\qst@endcleanlf^^J%
    \string\EndInternalSetValue^^J}}}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\qst@cleanlf}
% \begin{macro}{\qst@endcleanlf}
%    \begin{macrocode}
\def\qst@cleanlf#1^^J{#1^%
  ^J\qst@cleanlf}
\def\qst@endcleanlf^%
  ^J\qst@cleanlf{:^^J}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \begin{macro}{\InternalSetValue}
%   The chosen catcodes are picked in order to have |^^xx| escapes
%   still work out (\TeX\ can't be kept from using them occasionally).
%   Of course, in case |^^| sequences have indeed been present in the
%   original macro (like in \cmd{\qst@cleanlf} above), we get
%   flummoxed.  The spaces we read in here should be the same that
%   occur during sanitization.  All of this is a bit of compromise.
%   Newlines separate keys and values.
%    \begin{macrocode}
\newcommand*\InternalSetValue{\begingroup
  \let\do\@makeother\dospecials
  \endlinechar`\^^J
  \catcode`\^7
  \qst@setsavedii}
\begingroup
\catcode`\!=12
\lccode`\!=`\\
\lowercase{\endgroup
  \def\qst@setsavedii#1:^^J#2:^^J!}EndInternalSetValue^^J{\endgroup
%<etex>  \expandafter\gdef\csname qst@value:\detokenize{#1}\endcsname{#2}}
%<!etex>  \expandafter\gdef\csname qst@value:\string#1\endcsname{#2}}
%    \end{macrocode}   
% \end{macro}
% \begin{macro}{\EndInternalSetValue}
% This should actually never get encountered:
%    \begin{macrocode}
\newcommand*{\EndInternalSetValue}{%
  \PackageError{qstest}{\string\InternalSetValue\space got confused}%
  {You probably wrote something bad to the save file}}
%    \end{macrocode}
% \end{macro}
% 
% \begin{macro}{\SavedValue}
%   This is used for retrieving a saved value.  If there is no such
%   value, instead the current setting in \cmd{\qst@defaultvalue} is
%   used.
%    \begin{macrocode}
\def\SavedValue#1{%
%<*etex>
  \ifcsname qst@value:\detokenize{#1}\endcsname
    \expandafter\expandafter\expandafter
    {\csname qst@value:\detokenize{#1}\expandafter\endcsname\expandafter}%
  \else
    \expandafter\expandafter\expandafter{\expandafter\qst@defaultvalue
      \expandafter}%
%</etex>
%<*!etex>
  \expandafter\ifx\csname qst@value:\string#1\endcsname\relax
    \expandafter\expandafter\expandafter{\expandafter\qst@defaultvalue
      \expandafter}%
  \else
    \expandafter\expandafter\expandafter
    {\csname qst@value:\string#1\expandafter\endcsname\expandafter}%
%</!etex>
  \fi}
%    \end{macrocode}
% \end{macro}
% \subsection{The End}
% The test can be ended either in the driver file, or in a standalone
% testfile.  \cmd{\stop} is \LaTeX's way of ending the processing of
% an input file before any document processing or setup has been done.
%    \begin{macrocode}
%</package>
%<test> \stop
%    \end{macrocode}
% \Finale