path: root/macros/latex/contrib/hyperref/manual.tex

% This is the manual for the LaTeX hyperref package.
%
% Copyright (C) 1998-2003 Sebastian Rahtz.
% Copyright (C) 2003 Steve Peter and Karl Berry
% Copyright (C) 2006-2012 Heiko Oberdiek.
% Copyright (C) 2017-2019 David Carlisle Ulrike Fischer
% Copyright (C) 2019-2020 The LaTeX3 Project
%
% Permission is granted to copy, distribute and/or modify this document
% under the terms of the GNU Free Documentation License, Version 1.1 or
% any later version published by the Free Software Foundation; with no
% Invariant Sections, with no Front-Cover Texts, and with no Back-Cover
% Texts.  A copy of the license is included in the section entitled
% ``GNU Free Documentation License.''
%

\def\mydate{January 2020}

\RequirePackage{iftex}
\ifpdf % We are running pdfTeX in pdf mode
\ifx\directlua\undefinded
\documentclass[pdftex]{article}
\else
\documentclass[luatex]{article}
\fi
\else
\documentclass{article}
\fi


\usepackage{pifont}
\usepackage{calc}

\usepackage{hologo}

\def\OzTeX{O\kern-0.03em z\kern-0.15em \TeX}

\newcommand*{\cs}[1]{%
  \texttt{\textbackslash #1}%
}
\newcommand*{\xpackage}[1]{\textsf{#1}}
\newcommand*{\xoption}[1]{\textsf{#1}}

% from doc.sty
\makeatletter
\ifx\l@nohyphenation\@undefined
\newlanguage\l@nohyphenation
\fi
\ifx\l@nohyphenation\@undefined
  \newlanguage\l@nohyphenation
\fi
\DeclareRobustCommand\meta[1]{%
  \ensuremath\langle
  \ifmmode \expandafter \nfss@text \fi
  {%
    \meta@font@select
    \edef\meta@hyphen@restore
      {\hyphenchar\the\font\the\hyphenchar\font}%
    \hyphenchar\font\m@ne
    \language\l@nohyphenation
    #1\/%
    \meta@hyphen@restore
  }%
  \ensuremath\rangle
}
\def\meta@font@select{\ttfamily\itshape}
\makeatother

% Page layout.
\advance\textwidth by 1.1in
\advance\oddsidemargin by -.55in
\advance\evensidemargin by -.55in
%
\advance\textheight by 1in
\advance\topmargin by -.5in
\advance\footskip by -.5in
%
\pagestyle{headings}
%
% Avoid some overfull boxes.
\emergencystretch=.1\hsize
\hbadness = 3000

% these are from lshort.sty, but lshort.sty pulls in so many other
% packages it seems cleaner to just include them here.
%
\newcommand{\bs}{\symbol{'134}}%Print backslash
\newcommand{\ci}[1]{\texttt{\bs#1}}

\makeatletter
\@ifpackageloaded{tex4ht}{%
  % separate definition for HTML case to avoid
  % nasty borders with double horizontal lines with
  % large gaps.
  \newsavebox{\cmdsyntaxbox}%
  \newenvironment{cmdsyntax}{%
    \par
    % \small
    \addvspace{3.2ex plus 0.8ex minus 0.2ex}%
    \vskip -\parskip
    \noindent
    \begin{lrbox}{\cmdsyntaxbox}%
      \begin{tabular}{l}%
        \rule{0pt}{1em}%
        \ignorespaces
  }{%
      \end{tabular}%
    \end{lrbox}%
    \fbox{\usebox{\cmdsyntaxbox}}%
    \par
    \nopagebreak
    \addvspace{3.2ex plus 0.8ex minus 0.2ex}%
    \vskip -\parskip
  }%
}{%
  \newenvironment{cmdsyntax}{%
    \par
    \small
    \addvspace{3.2ex plus 0.8ex minus 0.2ex}%
    \vskip -\parskip
    \noindent
    \begin{tabular}{|l|}%
      \hline
      \rule{0pt}{1em}%
      \ignorespaces
  }{%
      \\%
      \hline
    \end{tabular}%
    \par
    \nopagebreak
    \addvspace{3.2ex plus 0.8ex minus 0.2ex}%
    \vskip -\parskip
  }%
}
\makeatother

\usepackage{array,longtable}
\ifnum 0\ifluatex 1\else\ifxetex 1\fi\fi=0 %
  \usepackage[T1]{fontenc}%
  \usepackage{lmodern}%
  \renewcommand*{\ttdefault}{lmvtt}%
\else
  \usepackage{fontspec}%
  \renewcommand*{\ttdefault}{lmvtt}%
\fi

\newcommand*{\Quote}[1]{\textquotedblleft#1\textquotedblright}

\def\Hanh{H\`an Th\^e\llap{\raise 0.5ex\hbox{\'{}}} Th\`anh}

\ifpdf
  \usepackage[%
%    pdftex,% might be luatex, just allow automatic default
    colorlinks,%
    hyperindex,%
    plainpages=false,%
    bookmarksopen,%
    bookmarksnumbered,
    pdfusetitle,%
  ]{hyperref}
  %%?? \def\pdfBorderAttrs{/Border [0 0 0] } % No border arround Links
\else
  \usepackage{hyperref}
\fi

\makeatletter
\@ifpackageloaded{tex4ht}{%
\author{Sebastian Rahtz (deceased)\and
       Heiko Oberdiek (inactive)\and
       The \LaTeX3 Project (\url{https://github.com/latex3/hyperref/issues})}
}{%
  \usepackage{bmhydoc}%
\author{Sebastian Rahtz\thanks{deceased}\and
       Heiko Oberdiek\thanks{inactive}\and
       The \LaTeX3 Project\thanks{\url{https://github.com/latex3/hyperref/issues}}}
}
\makeatother
\title{Hypertext marks in \hologo{LaTeX}: a manual for \xpackage{hyperref}}
\date{2020-05-15 v7.00e}

\begin{document}

% comes out too close to the toc, and we know it's page one anyway.
\thispagestyle{empty}
\maketitle
\tableofcontents
\setcounter{tocdepth}{2}% for bookmark levels

\section{Introduction}

The package derives from, and builds on, the work of the Hyper\hologo{TeX}
project, described at \texttt{http://xxx.lanl.gov/hypertex/}\footnote{Now: \url{https://ctan.org/tex-archive/support/hypertex/hypertex}}. It extends
the functionality of all the \hologo{LaTeX} cross-referencing commands
(including the table of contents, bibliographies etc) to produce
\cs{special} commands which a driver can turn into hypertext links;
it also provides new commands to allow the user to write \emph{ad hoc}
hypertext links, including those to external documents and URLs.

The package is currently maintained at \url{https://github.com/latex3/hyperref/} and issues should
be reported there.

This manual provides a brief overview of the \xpackage{hyperref}
package. For more details, you should read the additional documentation
distributed with the package, as well as the complete documentation by
processing \texttt{hyperref.dtx}. You should also read the chapter on
\xpackage{hyperref} in \textit{The \hologo{LaTeX} Web Companion}, where you will
find additional examples.

The Hyper\hologo{TeX} specification\footnote{This is borrowed from an article
by Arthur Smith.} says that conformant viewers/translators must
recognize the following set of \cs{special} constructs:

\begin{description}
\item[href:] \verb|html:<a href = "href_string">|
\item[name:] \verb|html:<a name = "name_string">|
\item[end:] \verb|html:</a>|
\item[image:] \verb|html:<img src = "href_string">|
\item[base\_name:] \verb|html:<base href = "href_string">|
\end{description}

The \emph{href}, \emph{name} and \emph{end} commands are used to do the
basic hypertext operations of establishing links between sections of
documents. The \emph{image} command is intended (as with current HTML
viewers) to place an image of arbitrary graphical format on the page in
the current location. The \emph{base\_name} command is be used to
communicate to the DVI viewer the full (URL) location of the current
document so that files specified by relative URLs may be retrieved
correctly.

The \emph{href} and \emph{name} commands must be paired with an
\emph{end} command later in the \TeX\ file---the \TeX\ commands between
the two ends of a pair form an \emph{anchor} in the document. In the
case of an \emph{href} command, the \emph{anchor} is to be highlighted
in the \emph{DVI viewer}, and when clicked on will cause the scene to
shift to the destination specified by \emph{href\_string}. The
\emph{anchor} associated with a name command represents a possible
location to which other hypertext links may refer, either as local
references (of the form \verb|href="#name_string"| with the
\emph{name\_string} identical to the one in the name command) or as part
of a URL (of the form \emph{URL\#name\_string}). Here
\emph{href\_string} is a valid URL or local identifier, while
\emph{name\_string} could be any string at all: the only caveat is that
`$\verb|"|$' characters should be escaped with a backslash
($\backslash$), and if it looks like a URL name it may cause problems.

However, the drivers intended to produce \emph{only} PDF use literal
PostScript or PDF \verb|\special| commands. The commands are defined in
configuration files for different drivers, selected by package options;
at present, the following drivers are supported:

\begin{description}
\item[hypertex] DVI processors conforming to the Hyper\TeX\ guidelines (i.e.\ \textsf{xdvi}, \textsf{dvips} (with
the \textsf{-z} option), \textsf{\OzTeX}, and \textsf{Textures})
\item[dvips] produces \verb|\special| commands tailored for \textsf{dvips}
\item[dvipsone] produces \verb|\special| commands tailored for \textsf{dvipsone}
\item[ps2pdf] a special case of output suitable for processing by earlier versions of Ghost\-script's
PDF writer; this is basically the same as that for \textsf{dvips}, but a few variations remained before version 5.21
\item[tex4ht] produces \verb|\special| commands for use with \textsf{\TeX4ht}
\item[pdftex] pdf\TeX, \Hanh{}'s \TeX{} variant that writes PDF directly
\item[luatex] lua\TeX, Unicode \TeX{} variant that writes PDF directly
\item[dvipdfm] produces \verb|\special| commands for Mark Wicks' DVI to PDF driver \textsf{dvipdfm}
\item[dvipdfmx] produces \verb|\special| commands for driver
     \textsf{dvipdfmx}, a successor of \textsf{dvipdfm}
\item[dviwindo] produces \verb|\special| commands that Y\&Y's Windows previewer interprets as hypertext jumps within the previewer
\item[vtex] produces \verb|\special| commands that MicroPress' HTML and
     PDF-producing \TeX\ variants interpret as hypertext jumps within the
     previewer
\item[textures] produces \verb|\special| commands that \textsf{Textures} interprets as hypertext jumps within the previewer
\item[xetex] produces \verb|\special| commands for Xe\TeX{}
\end{description}

Output from \textsf{dvips} or \textsf{dvipsone} must be processed using
Acrobat Distiller to obtain a PDF file.\footnote{Make sure you turn off
the partial font downloading supported by \textsf{dvips} and
\textsf{dvipsone} in favor of Distiller's own system.} The result is
generally preferable to that produced by using the \textsf{hypertex}
driver, and then processing with \textsf{dvips -z}, but the DVI file is
not portable. The main advantage of using the Hyper\TeX\ \ci{special}
commands is that you can also use the document in hypertext DVI viewers,
such as \textsf{xdvi}.

\begin{description}
\item[driverfallback]
  If a driver is not given and cannot be autodetected, then use
  the driver option, given as value to this option \textsf{driverfallback}.
  Example:
  \begin{quote}
    \texttt{driverfallback=dvipdfm}
  \end{quote}
  Autodetected drivers (\textsf{pdftex}, \textsf{xetex}, \textsf{vtex},
  \textsf{vtexpdfmark}) are recognized from within \TeX\ and
  therefore cannot be given as value to option \textsf{driverfallback}.
  However a DVI driver program is run after the \TeX\ run is finished.
  Thus it cannot be detected at \TeX\ macro level. Then package
  \xpackage{hyperref}
  uses the driver, given by \textsf{driverfallback}. If the driver
  is already specified or can be autodetected, then option
  \textsf{driverfallback} is ignored.
\end{description}

\section{Implicit behavior}

This package can be used with more or less any normal \LaTeX\ document
by specifying in the document preamble

\begin{verbatim}
\usepackage{hyperref}
\end{verbatim}

Make sure it comes \emph{last} of your loaded packages, to give it a
fighting chance of not being over-written, since its job is to redefine
many \LaTeX\ commands. Hopefully you will find that all cross-references
work correctly as hypertext. For example, \ci{section} commands will
produce a bookmark and a link, whereas \ci{section*} commands will only
show links when paired with a corresponding \ci{addcontentsline}
command.

In addition, the \texttt{hyperindex} option (see below) attempts to make
items in the index by hyperlinked back to the text, and the option
\texttt{backref} inserts extra `back' links into the bibliography for
each entry. Other options control the appearance of links, and give
extra control over PDF output. For example, \texttt{colorlinks}, as its
name well implies, colors the links instead of using boxes; this is the
option used in this document.


\section{Package options}

All user-configurable aspects of \xpackage{hyperref} are set using a
single `key=value' scheme (using the \xpackage{keyval} package) with the
key \texttt{Hyp}. The options can be set either in the optional argument
to the \cs{usepackage} command, or using the \cs{hypersetup}
macro. When the package is loaded, a file \texttt{hyperref.cfg} is read
if it can be found, and this is a convenient place to set options on a
site-wide basis.

Note however that some options (for example \texttt{unicode}) can only be used as
packge options, and not in \verb|\hypersetup| as the option settings are processed
as the package is read.

As an example, the behavior of a particular file could be controlled by:
\begin{itemize}

\item	a site-wide \texttt{hyperref.cfg} setting up the look of links,
adding backreferencing, and setting a PDF display default:

\begin{verbatim}
\hypersetup{backref,
pdfpagemode=FullScreen,
colorlinks=true}
\end{verbatim}

\item	A global option in the file, which is passed down to
\textsf{hyperref}:

\begin{verbatim}
\documentclass[dvips]{article}
\end{verbatim}

\item	File-specific options in the \cs{usepackage} commands, which
override the ones set in \texttt{hyperref.cfg}:

\begin{verbatim}
\usepackage[colorlinks=false]{hyperref}
\hypersetup{pdftitle={A Perfect Day}}
\end{verbatim}
\end{itemize}

As seen in the previous example, information entries
(pdftitle, pdfauthor, \dots) should be set after the package is loaded.
Otherwise \LaTeX\ expands the values of these options prematurely.
Also \LaTeX\ strips spaces in options. Especially option `pdfborder'
requires some care. Curly braces protect the value, if given
as package option. They are not necessary in \verb|\hypersetup|.

\begin{verbatim}
\usepackage[pdfborder={0 0 0}]{hyperref}
\hypersetup{pdfborder=0 0 0}
\end{verbatim}

Package `kvoptions-patch' patches \LaTeX\ to make it aware
of key value options and to prevent premature value expansions.

Some options can be given at any time, but many are restricted: before
\verb|\begin{document}|, only in \verb|\usepackage[...]{hyperref}|,
before first use, etc.

In the key descriptions that follow, many options do not need a value,
as they default to the value true if used. These are the ones classed as
`boolean'. The values true and false can always be specified, however.

\subsection{General options}

Firstly, the options to specify general behavior and page size.

\medskip
\begin{longtable}{>{\ttfamily}ll>{\itshape}ll}
draft          & boolean & false & all hypertext options are turned off \\
final          & boolean & true  & all hypertext options are turned on \\
debug          & boolean & false & extra diagnostic messages are printed in \\
               &         &       & the log file \\
verbose        & boolean & false & same as debug \\
implicit       & boolean & true  & redefines \LaTeX\ internals \\
setpagesize    & boolean & true  & sets page size by special driver commands
\end{longtable}

\subsection{Options for destination names}

Destinations names (also anchor, target or link names) are internal
names that identify a position on a page in the document. They
are used in link targets for inner document links or the bookmarks,
for example.

Usually anchor are set, if \cs{refstepcounter} is called.
Thus there is a counter name and value. Both are used to
construct the destination name. By default the counter value
follows the counter name separated by a dot. Example for
the fourth chapter:
\begin{quote}
  \verb|chapter.4|
\end{quote}
This scheme is used by:
\begin{description}
\item[\cs{autoref}] displays the description label for the
  reference depending on the counter name.
\item[\cs{hyperpage}] is used by the index to get
page links. Page anchor setting (\verb|pageanchor|) must not
be turned off.
\end{description}

It is very important that the destination names are unique,
because two destinations must not share the same name.
The counter value \cs{the<counter>} is not always unique
for the counter. For example, table and figures can be numbered
inside the chapter without having the chapter number in their
number. Therefore \xpackage{hyperref} has introduced \cs{theH<counter>}
that allows a unique counter value without messing up with
the appearance of the counter number. For example, the number
of the second table in the third chapter might be printed
as \texttt{2}, the result of \cs{thetable}. But the
destination name \texttt{table.2.4} is unique because it
has used \cs{theHtable} that gives \verb|2.4| in this case.

Often the user do not need to set \cs{theH<counter>}. Defaults
for standard cases (chapter, \dots) are provided. And after \xpackage{hyperref}
is loaded, new counters with parent counters also define
\cs{theH<counter>} automatically, if \cs{newcounter}, \cs{@addtoreset}
or \cs{numberwithin} of package \xpackage{amsmath} are used.

Usually problems with duplicate destination names can be solved
by an appropriate definition of \cs{theH<counter>}. If option
\texttt{hypertexnames} is disabled, then a unique artificial
number is used instead of the counter value. In case of page
anchors the absolute page anchor is used. With option \texttt{plainpages}
the page anchors use the arabic form. In both latter cases \cs{hyperpage}
for index links is affected and might not work properly.

If an unnumbered entity gets an anchor (starred forms of
chapters, sections, \dots) or \cs{phantomsection} is used,
then the dummy counter name \texttt{section*} and an artificial
unique number is used.

If the final PDF file is going to be merged with another file, than
the destination names might clash, because both documents might
contain \texttt{chapter.1} or \texttt{page.1}. Also \xpackage{hyperref}
sets anchor with name \texttt{Doc-Start} at the begin of the document.
This can be resolved by redefining \cs{HyperDestNameFilter}.
Package \xpackage{hyperref} calls this macro each time, it uses a
destination name.
The macro must be expandable and expects the destination name
as only argument. As example, the macro is redefined to add
a prefix to all destination names:
\begin{quote}
\begin{verbatim}
\renewcommand*{\HyperDestNameFilter}[1]{\jobname-#1}
\end{verbatim}
\end{quote}
In document \texttt{docA} the destination name \texttt{chapter.2}
becomes \texttt{docA-chapter.2}.

Destination names can also be used from the outside in URIs(, if the
driver has not removed or changed them), for example:
\begin{quote}
\begin{verbatim}
http://somewhere/path/file.pdf#nameddest=chapter.4
\end{verbatim}
\end{quote}
However using a number seems unhappy. If another chapter is added
before, the number changes. But it is very difficult to pass
a new name for the destination to the anchor setting process that
is usually deep hidden in the internals. The first name of
\cs{label} after the anchor setting seems a good approximation:
\begin{quote}
\begin{verbatim}
  \section{Introduction}
  \label{intro}
\end{verbatim}
\end{quote}
Option \texttt{destlabel} checks for each \cs{label}, if there is
a new destination name active and replaces the destination
name by the label name. Because the destination name is already in use
because of the anchor setting, the new name is recorded in the \texttt{.aux}
file and used in the subsequent \hologo{LaTeX} run. The renaming is done by
a redefinition of \cs{HyperDestNameFilter}. That leaves the old
destination names intact (e.g., they are needed for \cs{autoref}).
This redefinition is also available as \cs{HyperDestLabelReplace},
thus that an own redefinition can use it.
The following example also adds a prefix for \emph{all} destination names:
\begin{quote}
\begin{verbatim}
\renewcommand*{\HyperDestNameFilter}[1]{%
  \jobname-\HyperDestLabelReplace{#1}%
}
\end{verbatim}
\end{quote}
The other case that only files prefixed that do not have a corresponding
\cs{label} is more complicate, because \cs{HyperDestLabelReplace} needs
the unmodified destination name as argument. This is solved by an
expandable string test (\cs{pdfstrcmp} of \hologo{pdfTeX}
or \cs{strcmp} of \hologo{XeTeX}, package \xpackage{pdftexcmds} also supports
\hologo{LuaTeX}):
\begin{quote}
\begin{verbatim}
\usepackage{pdftexcmds}
\makeatletter
\renewcommand*{\HyperDestNameFilter}[1]{%
  \ifcase\pdf@strcmp{#1}{\HyperDestLabelReplace{#1}} %
    \jobname-#1%
  \else
    \HyperDestLabelReplace{#1}%
  \fi
}
\makeatother
\end{verbatim}
\end{quote}

With option \texttt{destlabel} destinations can also named manually,
if the destination is not yet renamed:
\begin{quote}
\verb|\HyperDestRename{|\meta{destination}\verb|}{|\meta{newname}\verb|}|
\end{quote}

Hint: Anchors can also be named and set by \cs{hypertarget}.

\medskip
\begin{longtable}{>{\ttfamily}ll>{\itshape}ll}
destlabel      & boolean & false & destinations are named by first \cs{label}\\
               &         &       & after anchor creation\\
hypertexnames  & boolean & true  & use guessable names for links \\
naturalnames   & boolean & false & use \LaTeX-computed names for links \\
plainpages     & boolean & false & Forces page anchors to be named by the Arabic form \\
               &         &       & of the page number, rather than the formatted form. \\
\end{longtable}

\subsection{Configuration options}

\begin{longtable}{>{\ttfamily}ll>{\itshape}lp{9cm}}
raiselinks & boolean & true  & In the hypertex driver, the height of links is normally calculated by the driver as
                               simply the base line of contained text; this options forces \verb|\special| commands to
                               reflect the real height of the link (which could contain a graphic) \\
breaklinks & boolean & false & Allows link text to break across lines; since this cannot be accommodated in PDF, it is
                               only set true by default if the pdftex driver is used. This makes links on multiple lines
                               into different PDF links to the same target. \\
pageanchor & boolean & true  & Determines whether every page is given an implicit anchor at the top left corner. If this
                               is turned off, \verb|\printindex| will not contain
                               valid hyperlinks. \\
nesting    & boolean & false & Allows links to be nested; no drivers currently support this.
\end{longtable}

Note for option \verb|breaklinks|:
The correct value is automatically set according to the driver features.
It can be overwritten for drivers that do not support broken links.
However, at any case, the link area will be wrong and displaced.

\subsection{Backend drivers}

If no driver is specified, the package tries to find a driver in
the following order:
\begin{enumerate}
\item Autodetection, some \TeX\ processors can be detected at \TeX\ macro
  level (pdf\TeX, Xe\TeX, V\TeX).
\item Option \textsf{driverfallback}. If this option is set, its value
  is taken as driver option.
\item Macro \cs{Hy@defaultdriver}. The macro takes a driver file
  name (without file extension).
\item Package default is \textsf{hypertex}.
\end{enumerate}
Many distributions are using a driver file \texttt{hypertex.cfg} that
define \cs{Hy@defaultdriver} with \texttt{hdvips}. This is recommended
because driver \textsf{dvips} provides much more features than
\textsf{hypertex} for PDF generation.

\begin{longtable}{@{}>{\ttfamily}lp{.8\hsize}@{}}
driverfallback & Its value is used as driver option\\
            & if the driver is not given or autodetected.\\
dvipdfm     & Sets up \textsf{hyperref} for use with the \textsf{dvipdfm} driver.\\
dvipdfmx    & Sets up \textsf{hyperref} for use with the \textsf{dvipdfmx} driver.\\
dvips       & Sets up \textsf{hyperref} for use with the \textsf{dvips} driver. \\
dvipsone    & Sets up \textsf{hyperref} for use with the \textsf{dvipsone} driver. \\
dviwindo    & Sets up \textsf{hyperref} for use with the \textsf{dviwindo} Windows previewer. \\
hypertex    & Sets up \textsf{hyperref} for use with the Hyper\TeX-compliant drivers. \\
latex2html  & Redefines a few macros for compatibility with \textsf{latex2html}. \\
nativepdf   & An alias for \textsf{dvips} \\
pdfmark     & An alias for \textsf{dvips} \\
pdftex      & Sets up \textsf{hyperref} for use with the \textsf{pdftex} program.\\
ps2pdf      & Redefines a few macros for compatibility with
              Ghostscript's PDF writer, otherwise identical to
              \textsf{dvips}. \\
tex4ht      & For use with \textsf{\TeX4ht} \\
textures    & For use with \textsf{Textures} \\
vtex        & For use with MicroPress' \textsf{VTeX}; the PDF
                       and HTML backends are detected automatically. \\
vtexpdfmark & For use with \textsf{VTeX}'s PostScript backend. \\
xetex       & For use with Xe\TeX\ (using backend for dvipdfm).
\end{longtable}
\smallskip

If you use \textsf{dviwindo}, you may need to redefine the macro
\ci{wwwbrowser} (the default is \verb|C:\netscape\netscape|) to tell
\textsf{dviwindo} what program to launch. Thus, users of Internet
Explorer might add something like this to hyperref.cfg:

\begin{verbatim}
\renewcommand{\wwwbrowser}{C:\string\Program\space
  Files\string\Plus!\string\Microsoft\space
  Internet\string\iexplore.exe}
\end{verbatim}

\subsection{Extension options}
\begin{longtable}{@{}>{\ttfamily}ll>{\itshape}lp{8cm}@{}}
extension      & text    &         & Set the file extension (e.g.\ \textsf{dvi}) which will be appended to file links
                                     created if you use the \xpackage{xr} package. \\
hyperfigures   & boolean &         & \\
backref        & text    & false   & Adds `backlink' text to the end of each item in the bibliography, as a list of
                                     section numbers. This can only work properly \emph{if} there is a blank line after
                                     each \verb|\bibitem|. Supported values are \verb|section|, \verb|slide|, \verb|page|,
                                     \verb|none|, or \verb|false|. If no value is given, \verb|section| is taken as default.\\
pagebackref    & boolean & false   & Adds `backlink' text to the end of each item in the bibliography, as a list of page
                                     numbers. \\
hyperindex     & boolean & true    & Makes the page numbers of index entries into hyperlinks. Relays on unique
                                     page anchors (\verb|pageanchor|, \ldots)
                                     \verb|pageanchors| and \verb|plainpages=false|. \\
hyperfootnotes & boolean & true    & Makes the footnote marks into hyperlinks to the footnote text.
                                     Easily broken \ldots\\
encap          &         &         & Sets encap character for hyperindex \\
linktoc        & text    & section & make text (\verb|section|), page number (\verb|page|), both (\verb|all|) or nothing (\verb|none|) be link on TOC, LOF and LOT \\
linktocpage    & boolean & false   & make page number, not text, be link on TOC, LOF and LOT \\
breaklinks     & boolean & false   & allow links to break over lines by making links over multiple lines into PDF links to
                                     the same target \\
colorlinks     & boolean & false   & Colors the text of links and anchors. The colors chosen depend on the the type of
                                     link. At present the only types of link distinguished are citations, page references,
                                     URLs, local file references, and other links.
                                     Unlike colored boxes, the colored
                                     text remains when printing.\\
linkcolor      & color   & red     & Color for normal internal links. \\
anchorcolor    & color   & black   & Color for anchor text. Ignored by most drivers. \\
citecolor      & color   & green   & Color for bibliographical citations in text. \\
filecolor      & color   & cyan    & Color for URLs which open local files. \\
menucolor      & color   & red     & Color for Acrobat menu items. \\
runcolor       & color   & filecolor & Color for run links (launch annotations). \\
urlcolor       & color   & magenta & Color for linked URLs. \\
allcolors      & color   &         & Set all color options (without border and field options).\\
frenchlinks    & boolean & false   & Use small caps instead of color for links.\\
hidelinks      &         &         & Hide links (removing color and border). \\
\end{longtable} \smallskip

Note that all color names must be defined before use, following the
normal system of the standard \LaTeX\ \xpackage{color} package.

\subsection{PDF-specific display options}
\begin{longtable}{@{}>{\ttfamily}ll>{\itshape}lp{7.6cm}@{}}
bookmarks          & boolean   & true   & A set of Acrobat bookmarks are written, in a manner similar to the
                                           table of contents, requiring two passes of \LaTeX. Some postprocessing
                                           of the bookmark file (file extension \texttt{.out}) may be needed to
                                           translate \LaTeX\ codes, since bookmarks must be written in  PDFEncoding.
                                           To aid this  process, the \texttt{.out} file is not rewritten by \LaTeX\
                                           if it is edited to contain a line \verb|\let\WriteBookmarks\relax| \\
bookmarksopen      & boolean   & false   & If Acrobat bookmarks are requested, show them with all the subtrees
                                           expanded. \\
bookmarksopenlevel & parameter &         & level (\ci{maxdimen}) to which bookmarks are open \\
bookmarksnumbered  & boolean   & false   & If Acrobat bookmarks are requested, include section numbers. \\
bookmarkstype      & text      & toc     & to specify which `toc' file to mimic \\
CJKbookmarks       & boolean   & false   &
    This option should be used to produce CJK bookmarks.
    Package \verb|hyperref|
    supports both normal and preprocessed mode of the \xpackage{CJK} package;
    during the creation of bookmarks, it simply replaces CJK's macros
    with special versions which expand to the corresponding character
    codes.  Note that without the `unicode' option of hyperref you get
    PDF files which actually violate the PDF specification because
    non-Unicode character codes are used -- some PDF readers localized
    for CJK languages (most notably Acroread itself) support this.
    Also note that option `CJKbookmarks' cannot be used together
    with option `unicode'.

    No mechanism is provided to translate non-Unicode bookmarks to
    Unicode; for portable PDF documents only Unicode encoding should
    be used.\\
pdfhighlight       & name      & /I      & How link buttons behave when selected; /I is for inverse (the default);
                                           the other possibilities are /N (no effect), /O (outline), and /P (inset
                                           highlighting). \\
citebordercolor    & RGB color & 0 1 0   & The color of the box around citations \\
filebordercolor    & RGB color & 0 .5 .5 & The color of the box around links to files \\
linkbordercolor    & RGB color & 1 0 0   & The color of the box around normal links \\
menubordercolor    & RGB color & 1 0 0   & The color of the box around Acrobat menu links \\
urlbordercolor     & RGB color & 0 1 1   & The color of the box around links to URLs \\
runbordercolor     & RGB color & 0 .7 .7 & Color of border around `run' links \\
allbordercolors    &           &         & Set all border color options \\
pdfborder          &           & 0 0 1   & The style of box around links; defaults to a box with lines of 1pt thickness,
                                           but the colorlinks option resets it to produce no border.
\end{longtable}

Note that the color of link borders can be specified \emph{only} as 3
numbers in the range 0..1, giving an RGB color. You cannot use colors
defined in \TeX. Since version 6.76a this is no longer true.
Especially with the help of package \xpackage{xcolor} the usual
color specifications of package \xpackage{(x)color} can be used.
For further information see description of package \xpackage{hycolor}.

The bookmark commands are stored in a file called
\textit{jobname}\texttt{.out}. The files is not processed by \LaTeX\ so
any markup is passed through. You can postprocess this file as needed;
as an aid for this, the \texttt{.out} file is not overwritten on the
next \TeX\ run if it is edited to contain the line
\begin{verbatim}
\let\WriteBookmarks\relax
\end{verbatim}

\subsection{PDF display and information options}
\begin{longtable}{@{}>{\ttfamily}l>{\raggedright}p{\widthof{key value}}>{\itshape}lp{7cm}@{}}
baseurl            & URL     &       & Sets the base URL of the PDF document \\
pdfpagemode        & name    & empty & Determines how the file is opening in Acrobat; the possibilities are
                                       \verb|UseNone|, \verb|UseThumbs| (show thumbnails), \verb|UseOutlines|
                                       (show bookmarks), \verb|FullScreen|, \verb|UseOC| (PDF 1.5),
                                       and \verb|UseAttachments| (PDF 1.6). If no mode if explicitly chosen, but the
                                       bookmarks option is set, \verb|UseOutlines| is used. \\
pdftitle           & text    &       & Sets the document information Title field \\
pdfauthor          & text    &       & Sets the document information Author field \\
pdfsubject         & text    &       & Sets the document information Subject field \\
pdfcreator         & text    &       & Sets the document information Creator field \\
addtopdfproducer   & text    &       & Adds additional text to the document information Producer field \\
pdfkeywords        & text    &       & Sets the document information Keywords field \\
pdftrapped         & name    & empty & Sets the document information Trapped entry. Possible values are \verb|True|, \verb|False| and \verb|Unknown|.
                                       An empty value means, the entry is not set.\\
%
pdfinfo            & key value list  & empty & Alternative interface for setting the
                                       document information.\\
pdfview            & name    & XYZ   & Sets the default PDF `view' for each link \\
pdfstartpage       & integer & 1     & Determines on which page the PDF file is opened. An empty value means, the entry is not set.\\
pdfstartview       & name    & Fit   & Set the startup page view \\
pdfremotestartview & name    & Fit   & Set the startup page view of remote PDF files \\
pdfpagescrop       & n n n n &       & Sets the default PDF crop box for pages. This should be a set of four numbers \\
pdfcenterwindow    & boolean & false & position the document window in the center of the screen \\
pdfdirection       & name    & empty & direction setting. Possible values:  \verb|L2R| (left to right) and
                                       \verb|R2L| (right to left)\\
pdfdisplaydoctitle & boolean & false & display document title instead of file name in title bar\\
pdfduplex          & name    & empty & paper handling option for print dialog. Possible vatues are:
                                       \verb|Simplex| (print single-sided),
                                       \verb|DuplexFlipShortEdge| (duplex and flip on the short edge of the sheet),
                                       \verb|DuplexFlipLongEdge| (duplex and flip on the long edge of the sheet)\\

pdffitwindow       & boolean & false & resize document window to fit document size \\
pdflang            & name    & relax & PDF language identifier (RFC 3066)\\
pdfmenubar         & boolean & true  & make PDF viewer's menu bar visible \\
pdfnewwindow       & boolean & false & make links that open another PDF file start a new window \\
pdfnonfullscreenpagemode
                   & name    & empty & page mode setting on exiting full-screen mode. Possible values are
                                       \verb|UseNone|, \verb|UseOutlines|, \verb|UseThumbs|, and \verb|UseOC|\\
pdfnumcopies       & integer & empty & number of printed copies \\
pdfpagelayout      & name    & empty & set layout of PDF pages.  Possible values:
                                       \verb|SinglePage|, \verb|OneColumn|,
                                       \verb|TwoColumnLeft|, \verb|TwoColumnRight|,
                                       \verb|TwoPageLeft|, and \verb|TwoPageRight| \\
pdfpagelabels      & boolean & true  & set PDF page labels \\
pdfpagetransition  & name    & empty & set PDF page transition style. Possible values are
                                       \verb|Split|, \verb|Blinds|, \verb|Box|, \verb|Wipe|,
                                       \verb|Dissolve|, \verb|Glitter|, \verb|R|,
                                       \verb|Fly|, \verb|Push|,
                                       \verb|Cover|, \verb|Uncover|,
                                       \verb|Fade|.
                                       The default according to the PDF~Reference is \verb|R|,
                                       which simply replaces the old page with the new one. \\
pdfpicktraybypdfsize
                   & boolean & false & specify whether PDF page size is used to select input paper tray in print dialog \\
pdfprintarea       & name    & empty & set /PrintArea of viewer preferences.  Possible values are
                                       \verb|MediaBox|, \verb|CropBox|,
                                       \verb|BleedBox|, \verb|TrimBox|, and \verb|ArtBox|.
                                       The dafault according to the PDF~Refence is \verb|CropBox| \\
pdfprintclip       & name    & empty & set /PrintClip of viewer preferences.  Possible values are
                                       \verb|MediaBox|, \verb|CropBox|,
                                       \verb|BleedBox|, \verb|TrimBox|, and \verb|ArtBox|.
                                       The dafault according to the PDF~Refence is \verb|CropBox| \\
pdfprintpagerange  & n n (n n)*
                             & empty & set /PrintPageRange of viewer preferences\\
pdfprintscaling    & name    & empty & page scaling option for print dialog
                                       (option /PrintScaling of viewer
                                       preferences, PDF 1.6);
                                       valid values are \verb|None| and
                                       \verb|AppDefault| \\
pdftoolbar         & boolean & true  & make PDF toolbar visible \\
pdfviewarea        & name    & empty & set /ViewArea of viewer preferences. Possible values are
                                       \verb|MediaBox|, \verb|CropBox|,
                                       \verb|BleedBox|, \verb|TrimBox|, and \verb|ArtBox|.
                                       The dafault according to the PDF~Refence is \verb|CropBox| \\
pdfviewclip        & name    & empty & set /ViewClip of viewer preferences Possible values are
                                       \verb|MediaBox|, \verb|CropBox|,
                                       \verb|BleedBox|, \verb|TrimBox|, and \verb|ArtBox|.
                                       The dafault according to the PDF~Refence is \verb|CropBox| \\
pdfwindowui        & boolean & true  & make PDF user interface elements visible \\
unicode            & boolean & false & Unicode encoded PDF strings
\end{longtable}

Each link in Acrobat carries its own magnification level, which is set
using PDF coordinate space, which is not the same as \TeX's. The unit
is bp and the origin is in the lower left corner. See also
\verb|\hypercalcbp| that is explained on page \pageref{hypercalcbp}.
pdf\TeX\
works by supplying default values for \texttt{XYZ} (horizontal $\times$
vertical $\times$ zoom) and \texttt{FitBH}. However, drivers using
\texttt{pdfmark} do not supply defaults, so \textsf{hyperref} passes in
a value of -32768, which causes Acrobat to set (usually) sensible
defaults. The following are possible values for the \texttt{pdfview},
\texttt{pdfstartview} and \texttt{pdfremotestartview} parameters.

\begin{longtable}{@{}>{\ttfamily}l>{\itshape}lp{7cm}@{}}
XYZ   & left top zoom         & Sets a coordinate and a zoom factor. If any one is null, the source link value is used.
                                \textit{null null null} will give the same values as the current page. \\
Fit   &                       & Fits the page to the window. \\
FitH  & top                   & Fits the width of the page to the window. \\
FitV  & left                  & Fits the height of the page to the window. \\
FitR  & left bottom right top & Fits the rectangle specified by the four coordinates to the window. \\
FitB  &                       & Fits the page bounding box to the window. \\
FitBH & top                   & Fits the width of the page bounding box to the window. \\
FitBV & left                  & Fits the height of the page bounding box to the window. \\
\end{longtable}

The \texttt{pdfpagelayout} can be one of the following values.

\begin{longtable}{@{}>{\ttfamily}lp{10cm}@{}}
SinglePage     & Displays a single page; advancing flips the page \\
OneColumn      & Displays the document in one column; continuous scrolling. \\
TwoColumnLeft  & Displays the document in two columns, odd-numbered pages to the left. \\
TwoColumnRight & Displays the document in two columns, odd-numbered pages to the right.\\
TwoPageLeft    & Displays two pages, odd-numbered pages to the left (since PDF 1.5).\\
TwoPageRight   & Displays two pages, odd-numbered pages to the right (since PDF 1.5).
\end{longtable}

Finally, the \texttt{pdfpagetransition} can be one of the following
values, where \textit{/Di} stands for direction of motion in degrees,
generally in 90$^{\circ}$\ steps, \textit{/Dm} is a horizontal
(\texttt{/H}) or vertical (\texttt{/V}) dimension (e.g.\ \texttt{Blinds
/Dm /V}), and \textit{/M} is for motion, either in (\texttt{/I}) or out
(\texttt{/O}).

\begin{longtable}{@{}>{\ttfamily}llp{8.5cm}@{}}
Blinds   & /Dm    & Multiple lines distributed evenly across the screen sweep in the same direction to reveal the new
                    page. \\
Box      & /M     & A box sweeps in or out. \\
Dissolve &        & The page image dissolves in a piecemeal fashion to reveal the new page. \\
Glitter  & /Di    & Similar to Dissolve, except the effect sweeps across the screen. \\
Split    & /Dm /M & Two lines sweep across the screen to reveal the new page. \\
Wipe     & /Di    & A single line sweeps across the screen to reveal the new page. \\
R        &        & Simply replaces the old page with the new one. \\
Fly      & /Di /M & Changes are flown out or in (as specified by /M), in the direction
                    specified by /Di, to or from a location that is
                    offscreen except when /Di is None. \\
Push     & /Di    & The old page slides off the screen while the new page slides in,
                    pushing the old page out in the direction
                    specified by /Di. \\
Cover    & /Di    & The new page slides on to the screen in the direction specified
                    by /Di, covering the old page. \\
Uncover  & /Di    & The old page slides off the screen in the direction specified by
                    /Di, uncovering the new page in the direction
                    specified by /Di. \\
Fade     &        & The new page gradually becomes visible through the old one.

\end{longtable}

\subsection{Option \texttt{pdfinfo}}

The information entries can be set using \texttt{pdftitle},
\texttt{pdfsubject}, \dots. Option \texttt{pdfinfo} provides an alternative
interface. It takes a key value list. The key names are the names that
appear in the PDF information dictionary directly. Known keys such as
\texttt{Title}, \texttt{Subject}, \texttt{Trapped} and other are mapped to
options \texttt{pdftitle}, \texttt{subject}, \texttt{trapped}, \dots
Unknown keys are added to the information dictionary. Their values are text
strings (see PDF specification).
Example:
\begin{quote}
\begin{verbatim}
\hypersetup{
  pdfinfo={
    Title={My Title},
    Subject={My Subject},
    NewKey={Foobar},
    % ...
  }
}
\end{verbatim}
\end{quote}

\subsection{Big alphabetical list}

The following is a complete listing of available options for
\textsf{hyperref}, arranged alphabetically.

\begin{longtable}{@{}>{\ttfamily}llp{7cm}@{}}
allbordercolors    &                        & Set all border color options\\
allcolors          &                        & Set all color options (without border and field options)\\
anchorcolor        & \textit{black}         & set color of anchors, ignored by most drivers. \\
backref            & \textit{false}         & do bibliographical back references \\
baseurl            & \textit{empty}         & set base URL for document \\
bookmarks          & \textit{true}          & make bookmarks \\
bookmarksnumbered  & \textit{false}         & put section numbers in bookmarks \\
bookmarksopen      & \textit{false}         & open up bookmark tree \\
bookmarksopenlevel & \ttfamily\ci{maxdimen} & level to which bookmarks are open \\
bookmarkstype      & \textit{toc}           & to specify which `toc' file to mimic \\
breaklinks         & \textit{false}         & allow links to break over lines \\
CJKbookmarks       & \textit{false}         & to produce CJK bookmarks\\
citebordercolor    & \textit{0 1 0}         & color of border around cites \\
citecolor          & \textit{green}         & color of citation links \\
colorlinks         & \textit{false}         & color links \\
                   & \textit{true}          & (\textsf{tex4ht}, \textsf{dviwindo}) \\
debug              & \textit{false}         & provide details of anchors defined; same as verbose \\
destlabel          & \textit{false}         & destinations are named by the first \verb|\label| after the anchor creation \\
draft              & \textit{false}         & do not do any hyperlinking \\
driverfallback     &                        & default if no driver specified or detected\\
dvipdfm            &                        & use \textsf{dvipdfm} backend \\
dvipdfmx           &                        & use \textsf{dvipdfmx} backend \\
dvips              &                        & use \textsf{dvips} backend \\
dvipsone           &                        & use \textsf{dvipsone} backend \\
dviwindo           &                        & use \textsf{dviwindo} backend \\
encap              &                        & to set encap character for hyperindex \\
extension          & \textit{dvi}           & suffix of linked files \\
filebordercolor    & \textit{0 .5 .5}       & color of border around file links \\
filecolor          & \textit{cyan}          & color of file links \\
final              & \textit{true}          & opposite of option draft \\
frenchlinks        & \textit{false}         & use small caps instead of color for links \\
hidelinks          &                        & Hide links (removing color and border) \\
hyperfigures       & \textit{false}         & make figures hyper links \\
hyperfootnotes     & \textit{true}          & set up hyperlinked footnotes \\
hyperindex         & \textit{true}          & set up hyperlinked indices \\
hypertex           &                        & use \textsf{Hyper\TeX} backend \\
hypertexnames      & \textit{true}          & use guessable names for links \\
implicit           & \textit{true}          & redefine \LaTeX\ internals \\
latex2html         &                        & use \textsf{\LaTeX2HTML} backend \\
linkbordercolor    & \textit{1 0 0}         & color of border around links \\
linkcolor          & \textit{red}           & color of links \\
linktoc            & \textit{section}       & make text be link on TOC, LOF and LOT \\
linktocpage        & \textit{false}         & make page number, not text, be link on TOC, LOF and LOT \\
menubordercolor    & \textit{1 0 0}         & color of border around menu links \\
menucolor          & \textit{red}           & color for menu links \\
nativepdf          & \textit{false}         & an alias for \textsf{dvips} \\
naturalnames       & \textit{false}         & use \LaTeX-computed names for links \\
nesting            & \textit{false}         & allow nesting of links \\
pageanchor         & \textit{true}          & put an anchor on every page \\
pagebackref        & \textit{false}         & backreference by page number \\
pdfauthor          & \textit{empty}         & text for PDF Author field \\
pdfborder          & \textit{0 0 1}         & width of PDF link border \\
                   & \textit{0 0 0}         & (\texttt{colorlinks)} \\
pdfborderstyle     &                        & border style for links \\
pdfcenterwindow    & \textit{false}         & position the document window in the center of the screen \\
pdfcreator         & \textit{LaTeX with}    & text for PDF Creator field \\
                   & \textit{hyperref}      & \\
pdfdirection       & \textit{empty}         & direction setting \\
pdfdisplaydoctitle & \textit{false}         & display document title instead
                                              of file name in title bar\\
pdfduplex          & \textit{empty}         & paper handling option for
                                              print dialog\\
pdffitwindow       & \textit{false}         & resize document window to fit document size \\
pdfhighlight       & \textit{/I}            & set highlighting of PDF links \\
pdfinfo            & \textit{empty}         & alternative interface for setting document information\\
pdfkeywords        & \textit{empty}         & text for PDF Keywords field \\
pdflang            & \textit{relax}         & PDF language identifier (RFC 3066) \\
pdfmark            & \textit{false}         & an alias for \textsf{dvips} \\
pdfmenubar         & \textit{true}          & make PDF viewer's menu bar visible \\
pdfnewwindow       & \textit{false}         & make links that open another PDF \\
                   &                        & file start a new window \\
pdfnonfullscreenpagemode
                   & \textit{empty}         & page mode setting on exiting
                                              full-screen mode\\
pdfnumcopies       & \textit{empty}         & number of printed copies\\
pdfpagelabels      & \textit{true}          & set PDF page labels \\
pdfpagelayout      & \textit{empty}         & set layout of PDF pages \\
pdfpagemode        & \textit{empty}         & set default mode of PDF display \\
pdfpagescrop       & \textit{empty}         & set crop size of PDF document \\
pdfpagetransition  & \textit{empty}         & set PDF page transition style \\
pdfpicktraybypdfsize
                   & \textit{empty}         & set option for print dialog \\
pdfprintarea       & \textit{empty}         & set /PrintArea of viewer preferences \\
pdfprintclip       & \textit{empty}         & set /PrintClip of viewer preferences \\
pdfprintpagerange  & \textit{empty}         & set /PrintPageRange of viewer preferences \\
pdfprintscaling    & \textit{empty}         & page scaling option for print dialog \\
pdfproducer        & \textit{empty}         & text for PDF Producer field \\
pdfremotestartview & \textit{Fit}           & starting view of remote PDF documents \\
pdfstartpage       & \textit{1}             & page at which PDF document opens \\
pdfstartview       & \textit{Fit}           & starting view of PDF document \\
pdfsubject         & \textit{empty}         & text for PDF Subject field \\
pdftex             &                        & use \textsf{pdf\TeX} backend \\
pdftitle           & \textit{empty}         & text for PDF Title field \\
pdftoolbar         & \textit{true}          & make PDF toolbar visible \\
pdftrapped         & \textit{empty} & Sets the document information Trapped entry.
  Possible values are \texttt{True}, \texttt{False} and \texttt{Unknown}.
  An empty value means, the entry is not set.\\
pdfview            & \textit{XYZ}           & PDF `view' when on link traversal \\
pdfviewarea        & \textit{empty}         & set /ViewArea of viewer preferences \\
pdfviewclip        & \textit{empty}         & set /ViewClip of viewer preferences \\
pdfwindowui        & \textit{true}          & make PDF user interface elements visible \\
plainpages         & \textit{false}         & do page number anchors as plain Arabic \\
ps2pdf             &                        & use \textsf{ps2pdf} backend \\
psdextra           & \textit{false}         & define more short names for PDF string commands \\
raiselinks         & \textit{false}         & raise up links (for \textsf{Hyper\TeX} backend) \\
runbordercolor     & \textit{0 .7 .7}       & color of border around `run' links \\
runcolor           & \textit{filecolor}     & color of `run' links\\
setpagesize        & \textit{true}          & set page size by special driver commands \\
tex4ht             &                        & use \textsf{\TeX4ht} backend \\
textures           &                        & use \textsf{Textures} backend \\
unicode            & \textit{false}         & Unicode encoded pdf strings, by defaut true with \textsf{Xe\TeX} and \textsf{Lu\TeX} \\
urlbordercolor     & \textit{0 1 1}         & color of border around URL links \\
urlcolor           & \textit{magenta}       & color of URL links \\
verbose            & \textit{false}         & be chatty \\
vtex               &                        & use \textsf{VTeX} backend\\
xetex              &                        & use \textsf{Xe\TeX} backend\\
\end{longtable}

\section{Additional user macros}

If you need to make references to URLs, or write explicit links, the
following low-level user macros are provided:

\begin{cmdsyntax}
\ci{href}\verb|[|\emph{options}\verb|]|\verb|{|\emph{URL}\verb|}{|\emph{text}\verb|}|
\end{cmdsyntax}

\noindent The \emph{text} is made a hyperlink to the \emph{URL}; this
must be a full URL (relative to the base URL, if that is defined). The
special characters \# and \~{} do \emph{not} need to be escaped in any
way (unless the command is used in the argument of another command).

The optional argument \emph{options} recognizes the hyperref options
\texttt{pdfremotestartview}, \texttt{pdfnewwindow} and the following
key value options:
\begin{description}
\item[\texttt{page}:] Specifies the start page number of remote
PDF documents. First page is \verb|1|.
\item[\texttt{ismap}:] Boolean key, if set to \verb|true|, the
URL should appended by the coordinates as query parameters by
the PDF viewer.
\item[\texttt{nextactionraw}:] The value of key \verb|/Next| of
action dictionaries, see PDF specification.
\end{description}

\begin{cmdsyntax}
\ci{url}\verb|{|\emph{URL}\verb|}|
\end{cmdsyntax}

\noindent Similar to
\ci{href}\verb|{|\emph{URL}\verb|}{|\ci{nolinkurl}\verb|{|\emph{URL}\verb|}}|.
Depending on the driver \verb|\href| also tries to detect the link type.
Thus the result can be a url link, file link, \dots

\begin{cmdsyntax}
\ci{nolinkurl}\verb|{|\emph{URL}\verb|}|
\end{cmdsyntax}

\noindent Write \emph{URL} in the same way as \verb|\url|,
  without creating a hyperlink.

\begin{cmdsyntax}
\ci{hyperbaseurl}\verb|{|\emph{URL}\verb|}|
\end{cmdsyntax}

\noindent A base \emph{URL} is established, which is prepended to other
specified URLs, to make it easier to write portable documents.

\begin{cmdsyntax}
\ci{hyperimage}\verb|{|\emph{imageURL}\verb|}{|\emph{text}\verb|}|
\end{cmdsyntax}

\noindent The link to the image referenced by the URL is inserted, using
\emph{text} as the anchor.

  For drivers that produce HTML, the image itself is inserted by the
browser, with the \emph{text} being ignored completely.

\begin{cmdsyntax}
\ci{hyperdef}\verb|{|\emph{category}\verb|}{|\emph{name}\verb|}{|\emph{text}\verb|}|
\end{cmdsyntax}

\noindent A target area of the document (the \emph{text}) is marked, and
given the name \emph{category.name}

\begin{cmdsyntax}
\ci{hyperref}\verb|{|\emph{URL}\verb|}{|\emph{category}\verb|}{|\emph{name}\verb|}{|\emph{text}\verb|}|
\end{cmdsyntax}

\noindent \emph{text} is made into a link to \emph{URL\#category.name}

\begin{cmdsyntax}
\ci{hyperref}\verb|[|\emph{label}\verb|]{|\emph{text}\verb|}|
\end{cmdsyntax}

\noindent
\emph{text} is made into a link to the same place as
\verb|\ref{|\emph{label}\verb|}| would be linked.

\begin{cmdsyntax}
\ci{hyperlink}\verb|{|\emph{name}\verb|}{|\emph{text}\verb|}|
\end{cmdsyntax}
\begin{cmdsyntax}
\ci{hypertarget}\verb|{|\emph{name}\verb|}{|\emph{text}\verb|}|
\end{cmdsyntax}

\noindent A simple internal link is created with \verb|\hypertarget|,
with two parameters of an anchor \emph{name}, and anchor
\emph{text}. \verb|\hyperlink| has two arguments, the name of a
hypertext object defined somewhere by \verb|\hypertarget|, and the
\emph{text} which be used as the link on the page.

Note that in HTML parlance, the \verb|\hyperlink| command inserts a
notional \# in front of each link, making it relative to the current
testdocument; \verb|\href| expects a full URL.

\begin{cmdsyntax}
\ci{phantomsection}
\end{cmdsyntax}

\noindent
This sets an anchor at this location. It works similar to
\verb|\hypertarget{}{}| with an automatically chosen anchor name.
Often it is used in conjunction
with \verb|\addcontentsline| for sectionlike things (index, bibliography,
preface). \verb|\addcontentsline| refers to the latest previous location
where an anchor is set. Example:
\begin{quote}
\begin{verbatim}
\cleardoublepage
\phantomsection
\addcontentsline{toc}{chapter}{\indexname}
\printindex
\end{verbatim}
\end{quote}
Now the entry in the table of contents (and bookmarks) for the
index points to the start of the index page, not to a location
before this page.

\begin{cmdsyntax}
\ci{autoref}\verb|{|\emph{label}\verb|}|
\end{cmdsyntax}

\noindent
This is a replacement for the usual \verb|\ref| command that places a
contextual label in front of the reference. This gives your users a
bigger target to click for hyperlinks (e.g.\ `section 2' instead of
merely the number `2').

The label is worked out from the context of the original \verb|\label|
command by \textsf{hyperref} by using the macros listed below (shown
with their default values). The macros can be (re)defined in documents
using \verb|\(re)newcommand|; note that some of these macros are already
defined in the standard document classes. The mixture of lowercase and
uppercase initial letters is deliberate and corresponds to the author's
practice.

For each macro below, \textsf{hyperref} checks \ci{*autorefname} before
\ci{*name}.  For instance, it looks for \ci{figureautorefname} before
\ci{figurename}.

\begin{longtable}{@{}lp{10cm}@{}}
\textit{Macro}         & \textit{Default} \\
\ci{figurename}        & Figure \\
\ci{tablename}         & Table \\
\ci{partname}          & Part \\
\ci{appendixname}      & Appendix \\
\ci{equationname}      & Equation \\
\ci{Itemname}          & item \\
\ci{chaptername}       & chapter \\
\ci{sectionname}       & section \\
\ci{subsectionname}    & subsection \\
\ci{subsubsectionname} & subsubsection \\
\ci{paragraphname}     & paragraph \\
\ci{Hfootnotename}     & footnote \\
\ci{AMSname}           & Equation \\
\ci{theoremname}       & Theorem\\
\ci{page}              & page\\
\end{longtable}

Example for a redefinition if \textsf{babel} is used:
\begin{quote}
\begin{verbatim}
\usepackage[ngerman]{babel}
\addto\extrasngerman{%
  \def\subsectionautorefname{Unterkapitel}%
}
\end{verbatim}
\end{quote}

Hint: \cs{autoref} works via the counter name that the reference
is based on. Sometimes \cs{autoref} chooses the wrong name, if
the counter is used for different things. For example, it happens
with \cs{newtheorem} if a lemma shares a counter with theorems.
Then package \xpackage{aliascnt} provides a method to generate a
simulated second counter that allows the differentiation between
theorems and lemmas:
\begin{quote}
\begin{verbatim}
\documentclass{article}

\usepackage{aliascnt}
\usepackage{hyperref}

\newtheorem{theorem}{Theorem}

\newaliascnt{lemma}{theorem}
\newtheorem{lemma}[lemma]{Lemma}
\aliascntresetthe{lemma}

\providecommand*{\lemmaautorefname}{Lemma}

\begin{document}

We will use \autoref{a} to prove \autoref{b}.

\begin{lemma}\label{a}
  Nobody knows.
\end{lemma}

\begin{theorem}\label{b}
  Nobody is right.
\end{theorem}.

\end{document}
\end{verbatim}
\end{quote}

\begin{cmdsyntax}
\ci{autopageref}\verb|{|\emph{label}\verb|}|
\end{cmdsyntax}

\noindent
It replaces \verb|\pageref| and adds the name for page in front of
the page reference. First \ci{pageautorefname} is checked before
\ci{pagename}.

For instances where you want a reference to use the correct counter, but
not to create a link, there are starred forms (these starred forms exist even if
hyperref has been loaded with \verb|implicit=false|):

\begin{cmdsyntax}
\ci{ref*}\verb|{|\emph{label}\verb|}|
\end{cmdsyntax}

\begin{cmdsyntax}
\ci{pageref*}\verb|{|\emph{label}\verb|}|
\end{cmdsyntax}

\begin{cmdsyntax}
\ci{autoref*}\verb|{|\emph{label}\verb|}|
\end{cmdsyntax}

\begin{cmdsyntax}
\ci{autopageref*}\verb|{|\emph{label}\verb|}|
\end{cmdsyntax}

A typical use would be to write
\begin{verbatim}
\hyperref[other]{that nice section (\ref*{other}) we read before}
\end{verbatim}

We want \verb|\ref*{other}| to generate the correct number, but not to
form a link, since we do this ourselves with \ci{hyperref}.

\begin{cmdsyntax}
\ci{pdfstringdef}\verb|{|\emph{macroname}\verb|}{|\emph{\TeX string}\verb|}|
\end{cmdsyntax}

\ci{pdfstringdef} returns a macro containing the PDF string. (Currently
this is done globally, but do not rely on it.) All the following tasks,
definitions and redefinitions are made in a group to keep them local:

\begin{itemize}
\item Switching to PD1 or PU encoding
\item Defining the \Quote{octal sequence commands} (\verb|\345|): \verb|\edef\3{\string\3}|
\item Special glyphs of \TeX: \verb|\{|, \verb|\%|, \verb|\&|, \verb|\space|, \verb|\dots|, etc.
\item National glyphs (\textsf{german.sty}, \textsf{french.sty}, etc.)
\item Logos: \verb|\TeX|, \verb|\eTeX|, \verb|\MF|, etc.
\item Disabling commands that do not provide useful functionality in bookmarks:
\verb|\label|, \verb|\index|, \verb|\glossary|, \verb|\discretionary|, \verb|\def|, \verb|\let|, etc.
\item \LaTeX's font commands like \verb|\textbf|, etc.
\item Support for \verb|\xspace| provided by the \xpackage{xspace} package
\end{itemize}

In addition, parentheses are protected to avoid the danger of unsafe
unbalanced parentheses in the PDF string. For further details, see Heiko
Oberdiek's Euro\TeX\ paper distributed with \textsf{hyperref}.

\begin{cmdsyntax}
\ci{begin}\verb|{NoHyper}|\ldots\ci{end}\verb|{NoHyper}|
\end{cmdsyntax}
 Sometimes we just don't want the wretched package interfering
 with us. Define an environment we can put in manually, or include
 in a style file, which stops the hypertext functions doing anything.
 This is used, for instance, in the Elsevier classes, to stop
 \verb|hyperref| playing havoc in the front matter.

\subsection{Bookmark macros}

\subsubsection{Setting bookmarks}

Usually \textsf{hyperref} automatically adds bookmarks for
\verb|\section| and similar macros. But they can also set manually.

\begin{cmdsyntax}
\ci{pdfbookmark}\verb|[|\emph{level}\verb|]{|text\verb|}{|\emph{name}\verb|}|
\end{cmdsyntax}
creates a bookmark with the specified text and at the given level (default is
0). As name for the internal anchor name is used (in conjunction with
level). Therefore the name must be unique (similar to \verb|\label|).

\begin{cmdsyntax}
\ci{currentpdfbookmark}\verb|{|\emph{text}\verb|}{|\emph{name}\verb|}|
\end{cmdsyntax}
creates a bookmark at the current level.

\begin{cmdsyntax}
\ci{subpdfbookmark}\verb|{|\emph{text}\verb|}{|\emph{name}\verb|}|
\end{cmdsyntax}
creates a bookmark one step down in the bookmark hierarchy.
Internally the current level is increased by one.

\begin{cmdsyntax}
\ci{belowpdfbookmark}\verb|{|\emph{text}\verb|}{|\emph{name}\verb|}|
\end{cmdsyntax}
creates a bookmark below the current bookmark level. However after the
command the current bookmark level has not changed.

\noindent \textbf{Hint:} Package \textsf{bookmark} replaces
\textsf{hyperref}'s bookmark organization by a new algorithm:
\begin{itemize}
\item Usually only one \LaTeX\ run is needed.
\item More control over the bookmark appearance (color, font).
\item Different bookmark actions are supported (external file links,
  URLs, \dots).
\end{itemize}
Therefore I recommend using this package.

\subsubsection{Replacement macros}

\textsf{hyperref} takes the text for bookmarks from the arguments of
commands like \ci{section}, which can contain things like math, colors,
or font changes, none of which will display in bookmarks as is.

\begin{cmdsyntax}
\ci{texorpdfstring}\verb|{|\emph{\TeX string}\verb|}{|\emph{PDFstring}\verb|}|
\end{cmdsyntax}

For example,
\begin{verbatim}
\section{Pythagoras:
  \texorpdfstring{$ a^2 + b^2 = c^2 $}{%
    a\texttwosuperior\ + b\texttwosuperior\ =
    c\texttwosuperior
  }%
}
\section{\texorpdfstring{\textcolor{red}}{}{Red} Mars}
\end{verbatim}

\ci{pdfstringdef} executes the hook \pdfstringdefPreHook before it
expands the string. Therefore, you can use this hook to perform
additional tasks or to disable additional commands.

\begin{verbatim}
\expandafter\def\expandafter\pdfstringdefPreHook
\expandafter{%
  \pdfstringdefPreHook
  \renewcommand{\mycommand}[1]{}%
}
\end{verbatim}

However, for disabling commands, an easier way is via
\ci{pdfstringdefDisableCommands}, which adds its argument to the
definition of \ci{pdfstringdefPreHook} (`@' can here be used as letter in
command names):

\begin{verbatim}
\pdfstringdefDisableCommands{%
  \let~\textasciitilde
  \def\url{\pdfstringdefWarn\url}%
  \let\textcolor\@gobble
}
\end{verbatim}

\subsection{Utility macros}

\label{hypercalcbp}
\begin{cmdsyntax}
\ci{hypercalcbp}\verb|{|\emph{dimen specification}\verb|}|
\end{cmdsyntax}
\noindent
\verb|\hypercalcbp| takes a \TeX\ dimen specification and
converts it to bp and returns the number without the unit.
This is useful for options \verb|pdfview|, \verb|pdfstartview|
and \verb|pdfremotestartview|.
Example:
\begin{quote}
\begin{verbatim}
\hypersetup{
  pdfstartview={FitBH \hypercalcbp{\paperheight-\topmargin-1in
    -\headheight-\headsep}
}
\end{verbatim}
\end{quote}
The origin of the PDF coordinate system is the lower left corner.

Note, for calculations you need either package \xpackage{calc} or
\hologo{eTeX}. Nowadays the latter should automatically be enabled
for \hologo{LaTeX} formats. Users without \hologo{eTeX}, please, look
in the source documentation \verb|hyperref.dtx| for further
limitations.

Also \cs{hypercalcbp} cannot be used in option specifications
of \cs{documentclass} and \cs{usepackage}, because
\hologo{LaTeX} expands the option lists of these commands. However
package \xpackage{hyperref} is not yet loaded and an undefined control
sequence error would arise.

\section[New Features]{New Features%
\footnote{This section moved from the README file, needs more integration into the manual}}


\subsection{Option `pdflinkmargin'}

 Option `pdflinkmargin' is an experimental option for specifying
  a link margin, if the driver supports this. Default is 1 pt for
  supporting drivers.


\begin{description}
\item[pdfTeX]
\begin{itemize}
 \item The link area also depends on the surrounding box.
 \item Settings have local effect.
 \item When a page is shipped out, pdfTeX uses the current setting
    of the link margin for all links on the page.
\end{itemize}

\item[pdfmark]
\begin{itemize}
 \item Settings have global effect.
\end{itemize}

\item[xetex]
\begin{itemize}
 \item Settings must be done in the preamble or the first page and then have global effect.
       The key inserts the new (x)dvipdfmx special \verb|\special{dvipdfmx:config g #1}| (with the unit removed).
\end{itemize}

\item[Other drivers]
 Unsupported.
\end{description}


\subsection{Field option `calculatesortkey'}

 Fields with calculated values are calculated in document order
  by default. If calculated field values depend on other calculated
  fields that appear later in the document, then the correct calculation
  order can be specified with option `calculatesortkey'. Its value is
  used as key to lexicographically sort the calculated fields.
  The sort key do not need to be unique. Fields that share the same
  key are sorted in document order.



 Currently the field option `calculatesortkey' is only supported by
  the driver for pdfTeX.


\subsection{Option `localanchorname'}

 When an anchor is set (e.g. via \verb|\refstepcounter|, then the
  anchor name is globally set to the current anchor name.


 For example:
\begin{verbatim}
    \section{Foobar}
    \begin{equation}\end{equation}
    \label{sec:foobar}
\end{verbatim}
  With the default global setting (localanchorname=false)
  a reference to `sec:foobar' jumps to the equation before.
  With option `localanchorname' the anchor of the equation
  is forgotten after the environment and the reference
  `sec:foobar' jumps to the section title.


 Option `localanchorname' is an experimental option, there
  might be situations, where the anchor name is not available
  as expected.


\subsection{Option `customdriver'}

 The value of option `customdriver' is the name of an external
  driver file without extension `.def'. The file must have
  \verb|\ProvidesFile| with a version date and number that match the
  date and number of `hyperref', otherwise a warning is given.

 Because the interface, what needs to be defined in the driver,
  is not well defined and quite messy, the option is mainly intended
  to ease developing, testing, debugging the driver part.


\subsection{Option `psdextra'}

 LaTeX's NFSS is used to assist the conversion of arbitrary
  TeX strings to PDF strings (bookmarks, PDF information entries).
  Many math command names (\verb|\geq|, \verb|\notin|, ...) are not in control
  of NFSS, therefore they are defined with prefix `text'
  (\verb|\textgeq|, \verb|\textnotin|, ...). They can be mapped to short names
  during the processing to PDF strings. The disadvantage is that
  they are many hundreds macros that need to be redefined for
  each PDF string conversion. Therefore this can be enabled or
  disabled as option `psdextra'. On default the option is turned
  off (set to `false'). Turning the option on means
  that the short names are available. Then \verb|\geq| can directly
  be used instead of \verb|\textgeq|.


\subsection{\textbackslash XeTeXLinkBox}

 When XeTeX generates a link annotation, it does not look
  at the boxes (as the other drivers), but only at the character
  glyphs. If there are no glyphs (images, rules, ...), then
  it does not generate a link annotation. Macro \verb|\XeTeXLinkBox|
  puts its argument in a box and adds spaces at the lower left
  and upper right corners. An additional margin can be specified
  by setting it to the dimen register \verb|\XeTeXLinkMargin|. The default
  is 2pt.

 Example:


\begin{verbatim}
    % xelatex
    \documentclass{article}
    \usepackage{hyperref}
    \setlength{\XeTeXLinkMargin}{1pt}
    \begin{document}
    \section{Hello World}
    \newpage
    \label{sec:hello}
    \hyperref[sec:hello]{%
      \XeTeXLinkBox{\rule{10mm}{10mm}}%
    }
    \end{document}
\end{verbatim}

\subsection{\textbackslash IfHyperBooleanExists and \textbackslash IfHyperBoolean}
\begin{verbatim}
 \IfHyperBooleanExists{OPTION}{YES}{NO}
\end{verbatim}
  If a hyperref OPTION is a boolean, that means it takes values
  `true' or `false', then \verb|\IfHyperBooleanExists| calls YES, otherwise NO.


\begin{verbatim}
 \IfHyperBoolean{OPTION}{YES}{NO}
\end{verbatim}
  Macro \verb|\IfHyperBoolean| calls YES, if OPTION exists as boolean and is
  enabled. Otherwise NO is executed.



 Both macros are expandable. Additionally option `stoppedearly' is
  available. It is enabled if \verb|\MaybeStopEarly| or \verb|\MaybeStopNow|
  end hyperref prematurely.


\subsection{\textbackslash unichar}

 If a Unicode character is not supported by puenc.def, it can
  be given by using \verb|\unichar|. Its name and syntax is inherited
  from package `ucs'. However it is defined independently for
  use in hyperref's \verb|\pdfstringdef| (that converts arbitrary
  TeX code to PDF strings or tries to do this).



 Macro \verb|\unichar| takes a TeX number as argument,
  examples for U+263A (WHITE SMILING FACE):
\begin{verbatim}
    \unichar{"263A}% hexadecimal notation
    \unichar{9786}% decimal notation
\end{verbatim}
  `"' must not be a babel shorthand character or otherwise
  active. Otherwise prefix it with \verb|\string|:
\begin{verbatim}
    \unichar{\string"263A}% converts `"' to `"' with catcode 12 (other)
\end{verbatim}
  Users of (n)german packages or babel options may use \verb|\dq| instead:
\begin{verbatim}
    \unichar{\dq 263A}% \dq is double quote with catcode 12 (other)
\end{verbatim}


\subsection{\textbackslash ifpdfstringunicode}

 Some features of the PDF specification needs PDF strings.
  Examples are bookmarks or the entries in the information dictionary.
  The PDF specification allows two encodings `PDFDocEncoding'
  (8-bit encoding) and `Unicode' (UTF-16). The user can help
  using \verb|\texorpdfstring| to replace complicate TeX constructs
  by a representation for the PDF string. However \verb|\texorpdfstring|
  does not distinguish the two encodings. This gap closes
  \verb|\ifpdfstringunicode|. It is only allowed in the second argument
  of \verb|\texorpdfstring| and takes two arguments, the first allows
  the full range of Unicode. The second is limited to the
  characters available in PDFDocEncoding.



 As example we take a macro definition for the Vietnamese
  name of Han The Thanh. Correctly written it needs some
  accented characters, one character even with a double accent.
  Class `tugboat.cls' defines a macro for the typesetted name:
\begin{verbatim}
    \def\Thanh{%
      H\`an~%
      Th\^e\llap{\raise 0.5ex\hbox{\'{}}}%
      ~Th\`anh%
    }
\end{verbatim}
  It's not entirely correct, the second accent over the `e' is not
  an acute, but a hook. However standard LaTeX does not provide
  such an accent.

    Now we can extend the definition to support hyperref.
  The first and the last word are already supported automatically.
  Characters with two or more accents are a difficult business in
  LaTeX, because the NFSS2 macros of the LaTeX kernel do not support
  more than one accent. Therefore also puenc.def misses support for
  them. But we can provide it using \verb|\unichar|. The character
  in question is:
\begin{verbatim}
    % U+1EC3 LATIN SMALL LETTER E WITH CIRCUMFLEX AND HOOK ABOVE
\end{verbatim}
  Thus we can put this together:
\begin{verbatim}
    \def\Thanh{%
      H\`an~%
      \texorpdfstring{Th\^e\llap{\raise 0.5ex\hbox{\'{}}}}%
      {\ifpdfstringunicode{Th\unichar{"1EC3}}{Th\^e}}%
      ~Th\`anh%
    }
\end{verbatim}
  For PDFDocEncoding (PD1) the variant above has dropped the
  second accent. Alternatively we could provide a representation
  without accents instead of wrong accents:
\begin{verbatim}
    \def\Thanh{%
      \texorpdfstring{%
        H\`an~%
        Th\^e\llap{\raise 0.5ex\hbox{\'{}}}}%
        ~Th\`anh%
      }{%
        \ifpdfstringunicode{%
          H\`an Th\unichar{"1EC3} Th\`anh%
        }{%
          Han The Thanh%
        }%
      }%
    }
\end{verbatim}

\subsection{Customizing index style file with \textbackslash nohyperpage}

 Since version 2008/08/14~v6.78f.



 For hyperlink support in the index, hyperref inserts \verb|\hyperpage|
  into the index macros. After processing with Makeindex, \verb|\hyperpage|
  analyzes its argument to detect page ranges and page comma lists.
  However, only the standard settings are supported directly:
\begin{verbatim}
    delim_r "--"
    delim_n ", "
\end{verbatim}
  (See manual page/documentation of Makeindex that explains
  the keys that can be used in style files for Makeindex.)
  Customized versions of
    \verb|delim_r, delim_n, suffix_2p, suffix_3p, suffix_mp|
  needs markup that \verb|\hyperpage| can detect and knows that
  this stuff does not belong to a page number. Makro
  \verb|\nohyperpage| serves as this markup. Put the customized
  code for these keys inside \verb|\nohyperpage|, e.g.:
\begin{verbatim}
    suffix_2p "\\nohyperpage{f.}"
    suffix_3p "\\nohyperpage{ff.}"
\end{verbatim}
  (Depending on the typesetting tradition some space ``\verb|\\|,'' or ``\verb|~|''
  should be put before the first f inside \verb|\nohyperpage|.)


\subsection{Experimental option `ocgcolorlinks'}

 The idea are colored links, when viewed, but printed without colors.
  This new experimental option `ocgcolorlinks' uses Optional Content
  Groups, a feature introduced in PDF 1.5.

  A better implementation which hasn't the disadvantage to prevent line breaks is
  in the ocgx2 package. Check its documentation for details how to use it.
\begin{itemize}
 \item The option must be given for package loading:
      \verb|\usepackage[ocgcolorlinks]{hyperref}|
 \item Main disadvantage: Links cannot be broken across lines.
    PDF reference 1.7: 4.10.2 ``Making Graphical Content Optional'':
      Graphics state operations, such as setting the color, ...,
      are still applied.
    Therefore the link text is put in a box and set twice, with and
    without color.
 \item The feature can be switched of by \verb|\hypersetup{ocgcolorlinks=false}|
    inside the document.
 \item Supported drivers: pdftex, dvipdfm
 \item The PDF version should be at least 1.5. It is automatically
    set for pdfTeX, LuaTeX and dvipdfmx.
\end{itemize}

\subsection{Option `pdfa'}

 The new option `pdfa' tries to avoid violations of PDF/A in code
  generated by hyperref. However, the result is usually not in PDF/A,
  because many features aren't controlled by hyperref (XMP metadata,
  fonts, colors, driver dependend low level stuff, ...).



 Currently, option `pdfa' sets and disables the following items:
\begin{itemize}
 \item Enabled annotation flags: Print, NoZoom, NoRotate [PDF/A 6.5.3].
 \item Disabled annotation flags: Hidden, Invisible, NoView [PDF/A 6.5.3].
 \item Disabled: Launch action (\href{run:...} [PDF/A 6.6.1].
 \item Restricted: Named actions (\Acrobatmenu: NextPage, PrevPage,
    FirstPage, LastPage) [PDF/A 6.6.1].
 \item Many things are disabled in PDF formulars:
  \begin{itemize}
   \item JavaScript actions [PDF/A 6.6.1]
   \item Trigger events (additional actions) [PDF/A 6.6.2]
   \item Push button (because of JavaScript)
   \item Interactive Forms: Flag NeedAppearances is the default `false'
      (Because of this, hyperref's implementation of Forms looks ugly).
      [PDF/A 6.9]
  \end{itemize}
\end{itemize}



 The default value of the new option `pdfa' is `false'. It influences
  the loading of the package and cannot be changed after hyperref is
  loaded (\verb|\usepackage{hyperref}|).



\subsection{Option `linktoc' added}

 The new option `linktoc' allows more control which part
  of an entry in the table of contents is made into a link:
\begin{itemize}
 \item `linktoc=none'    (no links)
 \item `linktoc=section' (default behaviour, same as `linktocpage=false')
 \item `linktoc=page'    (same as `linktocpage=true')
 \item `linktoc=all'     (both the section and page part are links)
\end{itemize}

\subsection{Option `pdfnewwindow' changed}

 Before 6.77b:
\begin{itemize}
 \item pdfnewwindow=true $\rightarrow$ /NewWindow true
 \item pdfnewwindow=false $\rightarrow$ (absent)
 \item unused pdfnewwindow $\rightarrow$ (absent)
\end{itemize}
  Since 6.77b:
\begin{itemize}
 \item pdfnewwindow=true $\rightarrow$ /NewWindow true
 \item pdfnewwindow=false $\rightarrow$ /NewWindow false
 \item pdfnewwindow={} $\rightarrow$ (absent)
 \item unused pdfnewwindow $\rightarrow$ (absent)
\end{itemize}



 Rationale: There is a difference between setting to `false'
  and an absent entry. In the former case the new document
  replaces the old one, in the latter case the PDF viewer
  application should respect the user preference.


\subsection{Flag options for PDF forms}

 PDF form field macros (\verb|\TextField|, \verb|\CheckBox|, ...) support
  boolean flag options. The option name is the lowercase
  version of the names in the PDF specification (1.7):

    \url{http://www.adobe.com/devnet/pdf/pdf_reference.html}

    \url{http://www.adobe.com/devnet/acrobat/pdfs/pdf_reference.pdf}

  Options (convert to lowercase) except flags in square brackets:

\begin{itemize}
 \item Table 8.16 Annotation flags (page 608):

{\obeylines
    1 Invisible
    2 Hidden (PDF 1.2)
    3 Print (PDF 1.2)
    4 NoZoom (PDF 1.3)
    5 NoRotate (PDF 1.3)
    6 NoView (PDF 1.3)
    [7 ReadOnly (PDF 1.3)] ignored for widget annotations, see table 8.70
    8 Locked (PDF 1.4)
    9 ToggleNoView (PDF 1.5)
    10 LockedContents (PDF 1.7)
}
 \item Table 8.70 Field flags common to all field types (page 676):

{\obeylines
    1 ReadOnly
    2 Required
    3 NoExport
}
 \item Table 8.75 Field flags specific to button fields (page 686):

{\obeylines
    15 NoToggleToOff (Radio buttons only)
    16 Radio (set: radio buttons, clear: check box, pushbutton: clear)
    17 Pushbutton
    26 RadiosInUniso (PDF 1.5)
}
 \item Table 8.77 Field flags specific to text fields (page 691):

{\obeylines
    13 Multiline
    14 Password
    21 FileSelect (PDF 1.4)
    23 DoNotSpellCheck (PDF 1.4)
    24 DoNotScroll (PDF 1.4)
    25 Comb (PDF 1.5)
    26 RichText (PDF 1.5)
}
 \item Table 8.79 Field flags specific to choice fields (page 693):

{\obeylines
    18 Combo (set: combo box, clear: list box)
    19 Edit (only useful if Combo is set)
    20 (Sort) for authoring tools, not PDF viewers
    22 MultiSelect (PDF 1.4)
    23 DoNotSpellCheck (PDF 1.4) (only useful if Combo and Edit are set)
    27 CommitOnSelChange (PDF 1.5)
}
 \item Table 8.86 Flags for submit-form actions (page 704):

{\obeylines
    [1 Include/Exclude] unsupported, use `noexport' (table 8.70) instead
    2 IncludeNoValueFields
    [3 ExportFormat] handled by option `export'
    4 GetMethod
    5 SubmitCoordinates
    [6 XFDF (PDF 1.4)] handled by option `export'
    7 IncludeAppendSaves (PDF 1.4)
    8 IncludeAnnotations (PDF 1.4)
    [9 SubmitPDF (PDF 1.4)] handled by option `export'
    10 CanonicalFormat (PDF 1.4)
    11 ExclNonUserAnnots (PDF 1.4)
    12 ExclFKey (PDF 1.4)
    14 EmbedForm (PDF 1.5)
}
\end{itemize}

 New option `export' sets the export format of a submit action.
  Valid values are (upper- or lowercase):
\begin{itemize}
 \item FDF
 \item HTML
 \item XFDF
 \item PDF (not supported by Acrobat Reader)
\end{itemize}

\subsection{Option `pdfversion'}

 This is an experimental option. It notifies `hyperref' about
  the intended PDF version. Currently this is used in code for
  PDF forms (implementation notes 116 and 122 of PDF spec 1.7).



 Values: 1.2, 1.3, 1.4, 1.5, 1.6, 1.7. Values below 1.2 are not
  supported, because most drivers expect higher PDF versions.



 The option must be used early, not after \verb|\usepackage{hyperref}|.


 In theory this option should also set the PDF version,
  but this is not generally supported.
\begin{itemize}
 \item pdfTeX below 1.10a: unsupported.
    pdfTeX $\ge$ 1.10a and < 1.30: \verb|\pdfoptionpdfminorversion|
    pdfTeX $\ge$ 1.30: \verb|\pdfminorversion|
 \item dvipdfm: configuration file, example:
    TeX Live 2007, texmf/dvipdfm/config/config, entry `V 2'.
 \item dvipdfmx: configuration file, example:
    TeX Live 2007, texmf/dvipdfm/dvipdfmx.cfg, entry `V 4'.
 \item Ghostscript: option -dCompatibilityLevel (this is set in
    `ps2pdf12', `ps2pdf13', `ps2pdf14').
\end{itemize}


 The current PDF version is used as default if this version
  can be detected (only pdfTeX $\ge$ 1.10a). Otherwise the lowest
  version 1.2 is assumed. Thus `hyperref' tries to avoid PDF code
  that breaks this version, but is free to use ignorable higher PDF
  features.


\subsection{Field option `name'}

 Many form objects uses the label argument
  for several purposes:
\begin{itemize}
 \item Layouted label.
 \item As name in HTML structures.
\end{itemize}
  Code that is suitable for layouting with TeX can
  break in the structures of the output format.
  If option `name' is given, then its value is used
  as name in the different output structures. Thus
  the value should consist of letters only.


\subsection{Option `pdfencoding'}

 The PDF format allows two encodings for bookmarks and entries
  in the information dictionary: PDFDocEncoding and Unicode
  as UTF-16BE. Option \xoption{pdfencoding} selects between these encodings:
\begin{itemize}
 \item \xoption{pdfdoc} uses PDFDocEncoding. It uses just one byte per character,
     but the supported characters are limited (244 in PDF-1.7).
 \item \xoption{unicode} sets Unicode. It is encoded as UTF-16BE. Two bytes
    are used for most characters, surrogates need four bytes.
 \item \xoption{auto} PDFDocEncoding if the string does not contain characters
    outside the encoding and Unicode otherwise.
\end{itemize}

 The luatex driver uses \xoption{unicode} by default. If another encoding should be forced,
 it should be done in \verb|hypersetup|.

\subsection{Color options/package hycolor}

 See documentation of package `hycolor'.


\subsection{Option pdfusetitle}

 If option pdfusetitle is set then hyperref tries to
  derive the values for pdftitle and pdfauthor from
  \verb|\title| and \verb|\author|. An optional argument for \verb|\title| and
  \verb|\author| is supported (class amsart).


\subsection{Starred form of \textbackslash autoref}

 \verb|\autoref*| generates a reference without link as \verb|\ref*| or \verb|\pageref*|.


\subsection{Link border style}

 Links can be underlined instead of the default rectangle or
  options \xoption{colorlinks}, \xoption{frenchlinks}. This is done by option
      \verb|pdfborderstyle={/S/U/W 1}|

  Some remarks:

\begin{itemize}
 \item AR7/Linux seems to have a bug, that don't use the default
    value \verb"1" for the width, but zero, thus that the underline
    is not visible without \verb"/W 1". The same applies for
    dashed boxes, eg.:
      pdfborderstyle={/S/D/D[3 2]/W 1}

 \item The syntax is described in the PDF specification, look for
    ``border style'', eg.
    Table 8.13 ``Entries in a border style dictionary''
    (specification for version 1.6)

 \item The border style is removed by
      pdfborderstyle={}
    This is automatically done if option colorlinks is enabled.

 \item Be aware that not all PDF viewers support this feature, not
    even Acrobat Reader itself:

    Some support:
   \begin{itemize}
   \item AR7/Linux: \xoption{underline} and \xoption{dashed}, but the border width
      must be given.
   \item xpdf 3.00: \xoption{underline} and \xoption{dashed}
   \end{itemize}

    Unsupported:
   \begin{itemize}
   \item AR5/Linux
   \item ghostscript 8.50
   \end{itemize}
\end{itemize}

\subsection{Option \xoption{bookmarksdepth}}

 The depth of the bookmarks can be controlled by the new
  option \xoption{bookmarksdepth}.  The option acts globally and
  distinguishes three cases:
\begin{itemize}
 \item \xoption{bookmarksdepth} without value
     Then hyperref uses the current value of counter \xoption{tocdepth}.
     This is the compatible behaviour and the default.
 \item \verb"bookmarksdepth=<number>", the value is number (also negative):
    The depth for the bookmarks are set to this number.
 \item \verb"bookmarksdepth=<name>"
    The <name> is a document division name (part, chapter, ...).
    It must not start with a digit or minus to avoid mixing up
    with the number case. Internally hyperref uses the value
    of macro \verb|\toclevel@<name>|.
  Examples:
\begin{verbatim}
    \hypersetup{bookmarksdepth=paragraph}
    \hypersetup{bookmarksdepth=4} % same as before
    \hypersetup{bookmarksdepth} % counter "tocdepth" is used
\end{verbatim}
\end{itemize}

\subsection{Option \xoption{pdfescapeform}}

 There are many places where arbitrary strings end up as
  PS or PDF strings. The PS/PDF strings in parentheses form
  require the protection of some characters, e.g. unmatched
  left or right parentheses need escaping or the escape
  character itself (backslash).
    Since 2006/02/12~v6.75a the PS/PDF driver should do
  this automatically. However I assume a problem with
  compatibility, especially regarding the form part where
  larger amounts of JavaScript code can be present.
  It would be a pain to remove all the escaping, because
  an additional escaping layer can falsify the code.

  Therefore a new option pdfescapeform was introduced:
\begin{itemize}
 \item pdfescapeform=false
    Escaping for the formulars are disabled, this is
    the compatibility behaviour, therefore this is the default.
 \item pdfescapeform=true
    Then the PS/PDF drivers do all the necessary escaping.
    This is the logical choice and the recommended setting.
    For example, the user writes JavaScript as JavaScript
    and do not care about escaping characters for PS/PDF
    output.
\end{itemize}

\subsection{Default driver setting}

 (hyperref $\ge$ 6.72s)
  If no driver is given, hyperref tries its best to guess the
  most suitable driver. Thus it loads \xoption{hpdftex}, if pdfTeX is
  detected running in PDF mode. Or it loads the corresponding
  VTeX driver for VTeX's working modes.
    Unhappily many driver programs run after the TeX compiler,
  so hyperref does not have a chance (dvips, dvipdfm, ...).
  In this case driver \xoption{hypertex} is loaded that supports the
  HyperTeX features that are recognized by xdvi for example.
  This behaviour, however, can easily be changed in the configuration
  file \verb"hyperref.cfg":
\begin{verbatim}
    \providecommand*{\Hy@defaultdriver}{hdvips}
\end{verbatim}
  for dvips, or
\begin{verbatim}
    \providecommand*{\Hy@defaultdriver}{hypertex}
\end{verbatim}
  for the default behaviour of hyperref.

 See also the new option `driverfallback'.

\subsection{Backref entries}

 Alternative interface for formatting of backref entries, example:

\begin{verbatim}
\documentclass[12pt,UKenglish]{article}

\usepackage{babel}
\usepackage[pagebackref]{hyperref}

% Some language options are detected by package backref.
% This affects the following macros:
%   \backrefpagesname
%   \backrefsectionsname
%   \backrefsep
%   \backreftwosep
%   \backreflastsep

\renewcommand*{\backref}[1]{
  % default interface
  % #1: backref list
  %
  % We want to use the alternative interface,
  % therefore the definition is empty here.
}
\renewcommand*{\backrefalt}[4]{%
  % alternative interface
  % #1: number of distinct back references
  % #2: backref list with distinct entries
  % #3: number of back references including duplicates
  % #4: backref list including duplicates
  \par
  #3 citation(s) on #1 page(s): #2,\par
  \ifnum#1=1 %
    \ifnum#3=1 %
      1 citation on page %
    \else
      #3 citations on page %
    \fi
  \else
    #3 citations on #1 pages %
  \fi
  #2,\par
  \ifnum#3=1 %
    1 citation located at page %
  \else
    #3 citations located at pages %
  \fi
  #4.\par
}

% The list of distinct entries can be further refined:
\renewcommand*{\backrefentrycount}[2]{%
  % #1: the original backref entry
  % #2: the count of citations of this entry,
  %     in case of duplicates greater than one
  #1%
  \ifnum#2>1 %
    ~(#2)%
  \fi
}

\begin{document}

  \section{Hello}
    \cite{ref1, ref2, ref3, ref4}
  \section{World}
    \cite{ref1, ref3}
  \newpage

  \section{Next section}
    \cite{ref1}
  \newpage

  \section{Last section}
    \cite{ref1, ref2}
  \newpage

  \pdfbookmark[1]{Bibliography}{bib}
  \begin{thebibliography}{99}
    \bibitem{ref1} Dummy entry one.

    \bibitem{ref2} Dummy entry two.

    \bibitem{ref3} Dummy entry three.

    \bibitem{ref4} Dummy entry four.

  \end{thebibliography}

\end{document}
\end{verbatim}

\subsection{\textbackslash phantomsection}

Set an anchor at this location.  It is often used in conjunction
with \verb|\addcontentsline| for sectionlike things (index, bibliography,
preface). \verb|\addcontentsline| refers to the latest previous location
where an anchor is set.

\begin{verbatim}
  \cleardoublepage
  \phantomsection
  \addcontentsline{toc}{chapter}{\indexname}
  \printindex
\end{verbatim}

Now the entry in the table of contents (and bookmarks) for the
index points to the start of the index page, not to a location
before this page.



\section{Acrobat-specific behavior}
If you want to access the menu options of Acrobat Reader or Exchange, the following
macro is provided in the appropriate drivers:

\begin{cmdsyntax}
\ci{Acrobatmenu}\verb|{|\emph{menuoption}\verb|}{|\emph{text}\verb|}|
\end{cmdsyntax}

\noindent The \emph{text} is used to create a button which activates the appropriate \emph{menuoption}. The following table lists the option names you can use---comparison of this with the menus in Acrobat Reader or Exchange will show what they do. Obviously some are only appropriate to Exchange.

\medskip
\begin{longtable}{@{}l>{\raggedright\arraybackslash}p{9cm}@{}}
File                          & Open, Close, Scan, Save, SaveAs, Optimizer:SaveAsOpt, Print, PageSetup, Quit \\
File$\rightarrow$Import       & ImportImage, ImportNotes, AcroForm:ImportFDF \\
File$\rightarrow$Export       & ExportNotes, AcroForm:ExportFDF \\
File$\rightarrow$DocumentInfo & GeneralInfo, OpenInfo, FontsInfo, SecurityInfo, Weblink:Base, AutoIndex:DocInfo \\
File$\rightarrow$Preferences  & GeneralPrefs, NotePrefs, FullScreenPrefs, Weblink:Prefs, AcroSearch:Preferences(Windows)
                                or, AcroSearch:Prefs(Mac), Cpt:Capture \\
Edit                          & Undo, Cut, Copy, Paste, Clear, SelectAll, Ole:CopyFile, TouchUp:TextAttributes,
                                TouchUp:FitTextToSelection, TouchUp:ShowLineMarkers, TouchUp:ShowCaptureSuspects,
                                TouchUp:FindSuspect, \\
                              & Properties \\
Edit$\rightarrow$Fields       & AcroForm:Duplicate, AcroForm:TabOrder \\
Document                      & Cpt:CapturePages, AcroForm:Actions, CropPages, RotatePages, InsertPages, ExtractPages,
                                ReplacePages, DeletePages, NewBookmark, SetBookmarkDest, CreateAllThumbs,
                                DeleteAllThumbs \\
View                          & ActualSize, FitVisible, FitWidth, FitPage, ZoomTo, FullScreen, FirstPage, PrevPage,
                                NextPage, LastPage, GoToPage, GoBack, GoForward, SinglePage, OneColumn, TwoColumns,
                                ArticleThreads, PageOnly, ShowBookmarks, ShowThumbs \\
Tools                         & Hand, ZoomIn, ZoomOut, SelectText, SelectGraphics, Note, Link, Thread, AcroForm:Tool,
                                Acro\_Movie:MoviePlayer, TouchUp:TextTool, Find, FindAgain, FindNextNote,
                                CreateNotesFile \\
Tools$\rightarrow$Search      & AcroSrch:Query, AcroSrch:Indexes, AcroSrch:Results, AcroSrch:Assist, AcroSrch:PrevDoc,
                                AcroSrch:PrevHit, AcroSrch:NextHit, AcroSrch:NextDoc \\
Window                        & ShowHideToolBar, ShowHideMenuBar, ShowHideClipboard, Cascade, TileHorizontal,
                                TileVertical, CloseAll \\
Help                          & HelpUserGuide, HelpTutorial, HelpExchange, HelpScan, HelpCapture, HelpPDFWriter,
                                HelpDistiller, HelpSearch, HelpCatalog, HelpReader, Weblink:Home \\
Help(Windows)                 & About
\end{longtable}

\section{PDF and HTML forms}
You must put your fields inside a \texttt{Form} environment (only one per file).

There are six macros to prepare fields:

\begin{cmdsyntax}
\ci{TextField}\verb|[|\emph{parameters}\verb|]{|\emph{label}\verb|}|
\end{cmdsyntax}

\begin{cmdsyntax}
\ci{CheckBox}\verb|[|\emph{parameters}\verb|]{|\emph{label}\verb|}|
\end{cmdsyntax}

\begin{cmdsyntax}
\ci{ChoiceMenu}\verb|[|\emph{parameters}\verb|]{|\emph{label}\verb|}{|\emph{choices}\verb|}|
\end{cmdsyntax}

\begin{cmdsyntax}
\ci{PushButton}\verb|[|\emph{parameters}\verb|]{|\emph{label}\verb|}|
\end{cmdsyntax}

\begin{cmdsyntax}
\ci{Submit}\verb|[|\emph{parameters}\verb|]{|\emph{label}\verb|}|
\end{cmdsyntax}

\begin{cmdsyntax}
\ci{Reset}\verb|[|\emph{parameters}\verb|]{|\emph{label}\verb|}|
\end{cmdsyntax}

The way forms and their labels are laid out is determined by:
\begin{cmdsyntax}
\ci{LayoutTextField}\verb|{|\emph{label}\verb|}{|\emph{field}\verb|}|
\end{cmdsyntax}

\begin{cmdsyntax}
\ci{LayoutChoiceField}\verb|{|\emph{label}\verb|}{|\emph{field}\verb|}|
\end{cmdsyntax}

\begin{cmdsyntax}
\ci{LayoutCheckField}\verb|{|\emph{label}\verb|}{|\emph{field}\verb|}|
\end{cmdsyntax}

These macros default to \#1 \#2

What is actually shown in as the field is determined by:
\begin{cmdsyntax}
\ci{MakeRadioField}\verb|{|\emph{width}\verb|}{|\emph{height}\verb|}|
\end{cmdsyntax}

\begin{cmdsyntax}
\ci{MakeCheckField}\verb|{|\emph{width}\verb|}{|\emph{height}\verb|}|
\end{cmdsyntax}
\begin{cmdsyntax}
\ci{MakeTextField}\verb|{|\emph{width}\verb|}{|\emph{height}\verb|}|
\end{cmdsyntax}
\begin{cmdsyntax}
\ci{MakeChoiceField}\verb|{|\emph{width}\verb|}{|\emph{height}\verb|}|
\end{cmdsyntax}

\begin{cmdsyntax}
\ci{MakeButtonField}\verb|{|\emph{text}\verb|}|
\end{cmdsyntax}

These macros default to \verb|\vbox to #2{\hbox to #1{\hfill}\vfill}|, except the
last, which defaults to \#1; it is used for buttons, and the special \ci{Submit} and \ci{Reset}
macros.

You may also want to redefine the following macros:
\begin{verbatim}
\def\DefaultHeightofSubmit{12pt}
\def\DefaultWidthofSubmit{2cm}
\def\DefaultHeightofReset{12pt}
\def\DefaultWidthofReset{2cm}
\def\DefaultHeightofCheckBox{0.8\baselineskip}
\def\DefaultWidthofCheckBox{0.8\baselineskip}
\def\DefaultHeightofChoiceMenu{0.8\baselineskip}
\def\DefaultWidthofChoiceMenu{0.8\baselineskip}
\def\DefaultHeightofText{\baselineskip}
\def\DefaultHeightofTextMultiline{4\baselineskip}
\def\DefaultWidthofText{3cm}
\end{verbatim}

\subsection{Forms environment parameters}

\smallskip
\begin{longtable}{@{}>{\ttfamily}l>{\itshape}lp{9cm}@{}}
action   & URL  & The URL that will receive the form data if a \textsf{Submit} button is included in the form \\
encoding & name & The encoding for the string set to the URL; FDF-encoding is usual, and \texttt{html} is the only
                  valid value \\
method   & name & Used only when generating HTML; values can be \texttt{post} or \texttt{get} \\
\end{longtable}

\subsection{Forms optional parameters}
Note that all colors must be expressed as RGB triples, in the range 0..1 (i.e.\ \texttt{color=0 0
0.5})

\smallskip
\begin{longtable}{@{}>{\ttfamily}ll>{\itshape}ll@{}}
accesskey       & key     &       & (as per HTML) \\
align           & number  & 0     & alignment within text field; 0 is left-aligned,\\*
                &         &       & 1 is centered, 2 is right-aligned. \\
altname         & name    &       & alternative name,\\*
                &         &       & the name shown in the user interface\\
backgroundcolor &         &       & color of box \\
bordercolor     &         &       & color of border \\
bordersep       &         &       & box border gap \\
borderwidth     &         & 1     & width of box border, the value is a dimension\\
                &         &       & or a number with default unit bp\\
calculate       &         &       & JavaScript code to calculate the value of the field \\
charsize        & dimen   &       & font size of field text \\
checkboxsymbol  & char    & 4 (\ding{\number`4}) & symbol used for check boxes (ZapfDingbats), \\
&&& the value is a character or \cs{ding}\verb|{|\texttt{\itshape number}\verb|}|, \\
&&& see package \xpackage{pifont} from bundle \xpackage{psnfss} \\
checked         & boolean & false & whether option selected by default \\
color           &         &       & color of text in box \\
combo           & boolean & false & choice list is `combo' style \\
default         &         &       & default value \\
disabled        & boolean & false & field disabled \\
format          &         &       & JavaScript code to format the field \\
height          & dimen   &       & height of field box \\
hidden          & boolean & false & field hidden \\
keystroke       &         &       & JavaScript code to control the keystrokes on entry \\
mappingname     & name    &       & the mapping name to be used when exporting\\*
                &         &       & the field data\\
maxlen          & number  & 0     & number of characters allowed in text field \\
menulength      & number  & 4     & number of elements shown in list \\
multiline       & boolean & false & whether text box is multiline \\
name            & name    &       & name of field (defaults to label) \\
onblur          &         &       & JavaScript code \\
onchange        &         &       & JavaScript code \\
onclick         &         &       & JavaScript code \\
ondblclick      &         &       & JavaScript code \\
onfocus         &         &       & JavaScript code \\
onkeydown       &         &       & JavaScript code \\
onkeypress      &         &       & JavaScript code \\
onkeyup         &         &       & JavaScript code \\
onmousedown     &         &       & JavaScript code \\
onmousemove     &         &       & JavaScript code \\
onmouseout      &         &       & JavaScript code \\
onmouseover     &         &       & JavaScript code \\
onmouseup       &         &       & JavaScript code \\
onselect        &         &       & JavaScript code \\
password        & boolean & false & text field is `password' style \\
popdown         & boolean & false & choice list is `popdown' style \\
radio           & boolean & false & choice list is `radio' style \\
radiosymbol     & char    & H (\ding{\number`H}) & symbol used for radio fields (ZapfDingbats), \\
&&& the value is a character or \cs{ding}\verb|{|\texttt{\itshape number}\verb|}|, \\
&&& see package \xpackage{pifont} from bundle \xpackage{psnfss} \\
readonly        & boolean & false & field is readonly \\
rotation        & number  & 0     & rotation of the widget annotation \\*
                &         &       & (degree, counterclockwise, multiple of 90)\\
tabkey          &         &       & (as per HTML) \\
validate        &         &       & JavaScript code to validate the entry \\
value           &         &       & initial value \\
width           & dimen   &       & width of field box
\end{longtable}

\section{Defining a new driver}
A hyperref driver has to provide definitions for eight macros:

\smallskip
\noindent 1. \verb|\hyper@anchor|

\noindent 2. \verb|\hyper@link|

\noindent 3. \verb|\hyper@linkfile|

\noindent 4. \verb|\hyper@linkurl|

\noindent 5. \verb|\hyper@anchorstart|

\noindent 6. \verb|\hyper@anchorend|

\noindent 7. \verb|\hyper@linkstart|

\noindent 8. \verb|\hyper@linkend|
\smallskip

The draft option defines the macros as follows
\begin{verbatim}
\let\hyper@@anchor\@gobble
\gdef\hyper@link##1##2##3{##3}%
\def\hyper@linkurl##1##2{##1}%
\def\hyper@linkfile##1##2##3{##1}%
\let\hyper@anchorstart\@gobble
\let\hyper@anchorend\@empty
\let\hyper@linkstart\@gobbletwo
\let\hyper@linkend\@empty
\end{verbatim}

\section{Special support for other packages}

Package \xpackage{hyperref} aims to cooperate with other packages, but there are
several possible sources for conflict, such as

\begin{itemize}

\item Packages that manipulate the bibliographic mechanism. Peter
William's \xpackage{harvard} package is supported. However, the
recommended package is Patrick Daly's \xpackage{natbib} package that has
specific \xpackage{hyperref} hooks to allow reliable interaction. This
package covers a very wide variety of layouts and citation styles, all
of which work with \xpackage{hyperref}.

\item Packages that typeset the contents of the \ci{label} and \ci{ref}
macros, such as \xpackage{showkeys}. Since the \xpackage{hyperref} package
redefines these commands, you must set \texttt{implicit=false} for these
packages to work.

\item Packages that do anything serious with the index.
\end{itemize}

The \xpackage{hyperref} package is distributed with variants on two useful
packages designed to work especially well with it. These are \xpackage{xr}
and \xpackage{minitoc}, which support crossdocument links using \hologo{LaTeX}'s
normal \cs{label}/\cs{ref} mechanisms and per-chapter tables of contents,
respectively.


\subsection{Package Compatibility}

Currently only package loading orders are available:



Note: hyperref loads package \xpackage{nameref} at \verb|\begin{document}|.
Sometimes this is too late, thus this package must be loaded
earlier.


\subsubsection{algorithm}
\begin{verbatim}
 \usepackage{float}
  \usepackage{hyperref}
  \usepackage[chapter]{algorithm}% eg.
\end{verbatim}

\subsubsection{amsmath}

 The environments equation and eqnarray are not supported too well.
  For example, there might be spacing problems (eqnarray isn't recommended
  anyway, see CTAN:info/l2tabu/, the situation for equation is unclear,
  because nobody is interested in investigating). Consider using the
  environments that package amsmath provide, e.g. gather for equation.
  The environment equation can even redefined to use gather:

\begin{verbatim}
  \usepackage{amsmath}
  \let\equation\gather
  \let\endequation\endgather
\end{verbatim}

\subsubsection{amsrefs}

 Package loading order:

\begin{verbatim}
  \usepackage{hyperref}
  \usepackage{amsrefs}
\end{verbatim}

\subsubsection{arydshln, longtable}

 Package longtable must be put before hyperref and arydshln,
  hyperref after arydshln generates an error, thus the
  resulting package order is then:

\begin{verbatim}
  \usepackage{longtable}
  \usepacakge{hyperref}
  \usepackage{arydshln}
\end{verbatim}

\subsubsection{babel/magyar.ldf}

 The old version 2005/03/30 v1.4j will not work.
  You need at least version 1.5, maintained by P\'eter Szab\'o,
  see CTAN:language/hungarian/babel/.


\subsubsection{babel/spanish.ldf}

 Babel's spanish.ldf redefines `\verb|\.|' to support `\verb|\...|'.
  In bookmarks (\verb|\pdfstringdef|) only `\verb|\.|' is supported.
  If `\verb|\...|' is needed,
    \verb|\texorpdfstring{\...}{\dots}|
  can be used instead.


\subsubsection{bibentry}

 Workaround:

\begin{verbatim}
  \makeatletter
  \let\saved@bibitem\@bibitem
  \makeatother

  \usepackage{bibentry}
  \usepackage{hyperref}

  \begin{document}

  \begingroup
    \makeatletter
    \let\@bibitem\saved@bibitem
    \nobibliography{database}
  \endgroup
\end{verbatim}

\subsubsection{bigfoot}

 Hyperref does not support package `bigfoot'. And package
  `bigfoot' does not support hyperref's footnotes and disables
  them (hyperfootnotes=false).


\subsubsection{chappg}

 Package `chappg' uses \verb|\@addtoreset| that is redefined by `hyperref'.
  The package order is therefore:

\begin{verbatim}
  \usepackage{hyperref}
  \usepackage{chappg}
\end{verbatim}

\subsubsection{cite}

 This is from Mike Shell:
 cite.sty cannot currently be used with hyperref.
 However, I can do a workaround via:

\begin{verbatim}
 \makeatletter
 \def\NAT@parse{\typeout{This is a fake Natbib command to fool Hyperref.}}
 \makeatother

 \usepackage[hypertex]{hyperref}
\end{verbatim}

 so that hyperref will not redefine any of the biblabel stuff - so cite.sty
 will work as normal - although the citations will not be hyperlinked, of
 course (But this may not be an issue for many people).


\subsubsection{count1to}

 Package `count1to' adds several \verb|\@addtoreset| commands that confuse
  `hyperref'. Therefore \verb|\theH<...>| has to be fixed:

\begin{verbatim}
  \usepackage{count1to}
  \AtBeginDocument{% *after* \usepackage{count1to}
    \renewcommand*{\theHsection}{\theHchapter.\arabic{section}}%
    \renewcommand*{\theHsubsection}{\theHsection.\arabic{subsection}}%
    \renewcommand*{\theHsubsubsection}{\theHsubsection.\arabic{subsubsection}}%
    \renewcommand*{\theHparagraph}{\theHsubsubsection.\arabic{paragraph}}%
    \renewcommand*{\theHsubparagraph}{\theHparagraph.\arabic{subparagraph}}%
  }
\end{verbatim}

\subsubsection{dblaccnt}

 pd1enc.def or puenc.def should be loaded before:
\begin{verbatim}
  \usepackage{hyperref}
  \usepackage{dblaccnt}
\end{verbatim}
  or see entry for \xoption{vietnam}.


\subsubsection{easyeqn}
 Not compatible, breaks.


\subsubsection{ellipsis}

 This packages redefines \verb|\textellipsis|
  after package hyperref (pd1enc.def/puenc.def should be loaded before):
\begin{verbatim}
  \usepackage{hyperref}
  \usepackage{ellipsis}
\end{verbatim}

\subsubsection{float}
\begin{verbatim}
 \usepackage{float}
  \usepackage{hyperref}
\end{verbatim}
\begin{itemize}
  \item Several \verb|\caption| commands are not supported inside one float object.
  \item Anchor are set at top of the float object, if its style is controlled
    by float.sty.
\end{itemize}

\subsubsection{endnotes}
 Unsupported.

\subsubsection{foiltex}
 Update to version 2008/01/28 v2.1.4b:
  Since version 6.77a hyperref does not hack into \verb|\@begindvi|,
  it uses package `atbegshi' instead, that hooks into \verb|\shipout|.
  Thus the patch of `foils.cls' regarding hyperref is now obsolete
  and causes an undefined error message about \verb|\@hyperfixhead|.
  This is fixed in FoilTeX 2.1.4b.


\subsubsection{footnote}

 This package is not supported, you have to disable hyperref's footnote
  support by using option \verb"hyperfootnotes=false".


\subsubsection{geometry}

 Driver `dvipdfm' and program `dvipdfm' might generate a warning:
      Sorry.  Too late to change page size
  Then prefer the program `dvipdfmx' or use one of the following
  workarounds to move the \verb|\special| of geometry to an earlier
  location:

\begin{verbatim}
    \documentclass[dvipdfm]{article}% or other classes
    \usepackage{atbegshi}
    \AtBeginDocument{%
      \let\OrgAtBeginDvi\AtBeginDvi
      \let\AtBeginDvi\AtBeginShipoutFirst
    }
    \usepackage[
      paperwidth=170mm,
      paperheight=240mm
    ]{geometry}
    \AtBeginDocument{%
      \let\AtBeginDvi\OrgAtBeginDvi
    }
    \usepackage{hyperref}

  or

    \documentclass[dvipdfm]{article}% or other classes
    \usepackage{atbegshi}
    \let\AtBeginDvi\AtBeginShipoutFirst
    \usepackage[
      paperwidth=170mm,
      paperheight=240mm
    ]{geometry}
    \usepackage{hyperref}
\end{verbatim}

\subsubsection{IEEEtran.cls}

 version $\ge$ V1.6b (because of \verb|\@makecaption|, see ChangeLog)


\subsubsection{index}

 version $\ge$ 1995/09/28 v4.1 (because of \verb|\addcontentsline| redefinition)


\subsubsection{lastpage}

 Compatible.


\subsubsection{linguex}
\begin{verbatim}
 \usepackage{hyperref}
  \usepackage{linguex}
\end{verbatim}

\subsubsection{ltabptch}
\begin{verbatim}
 \usepackage{longtable}
  \usepackage{ltabptch}
  \usepackage{hyperref}
\end{verbatim}

\subsubsection{mathenv}

 Unsupported.



 Both `mathenv' and `hyperref' messes around with
  environment `eqnarray'. You can load `mathenv' after
  `hyperref' to avoid an error message. But \verb|\label|
  will not work inside environment `eqnarray' properly,
  for example.


\subsubsection{minitoc-hyper}

 This package is obsolete, use the uptodate original
  package minitoc instead.


\subsubsection{multind}
\begin{verbatim}
 \usepackage{multind}
  \usepackage{hyperref}
\end{verbatim}

\subsubsection{natbib}
\begin{verbatim}
 \usepackage{natbib}
  \usepackage{hyperref}
\end{verbatim}

\subsubsection{nomencl}
Example for introducing links for the page numbers:
\begin{verbatim}
      \renewcommand*{\pagedeclaration}[1]{\unskip, \hyperpage{#1}}
\end{verbatim}


For equations the following might work:
\begin{verbatim}
      \renewcommand*{\eqdeclaration}[1]{%
        \hyperlink{equation.#1}{(Equation~#1)}%
      }
    But the mapping from the equation number to the anchor name
    is not available in general.
\end{verbatim}

\subsubsection{parskip}
\begin{verbatim}
 \usepackage{parskip}
  \usepackage{hyperref}[2012/08/20]
\end{verbatim}


 Both packages want to redefine \verb|\@starttoc|.


\subsubsection{prettyref}
\begin{verbatim}
%%% example for prettyref %%%
\documentclass{article}
\usepackage{prettyref}
\usepackage[pdftex]{hyperref}

%\newrefformat{FIG}{Figure~\ref{#1}}% without hyperref
\newrefformat{FIG}{\hyperref[{#1}]{Figure~\ref*{#1}}}

\begin{document}
  This is a reference to \prettyref{FIG:ONE}.
  \newpage
  \begin{figure}
    \caption{This is my figure}
    \label{FIG:ONE}
  \end{figure}
\end{document}
%%% example for prettyref %%%
      \end{verbatim}

\subsubsection{ntheorem}
\begin{verbatim}
 ntheorem-hyper.sty is an old patched version of ntheorem.sty.
  Newer versions of ntheorem know the option hyperref:
    \usepackage{hyperref}
    \usepackage[hyperref]{ntheorem}
  But there are still unsolved problems (options thref, ...).
\end{verbatim}

\subsubsection{setspace}
\begin{verbatim}
 \usepackage{setspace}
  \usepackage{hyperref}
\end{verbatim}

\subsubsection{sidecap}
\begin{verbatim}
 Before 2002/05/24 v1.5h:
    \usepackage{nameref}
    \usepackage{hyperref}
    \usepackage{sidecap}
\end{verbatim}

\subsubsection{subfigure}
\begin{verbatim}
 1995/03/06 v2.0:
    \usepackage{subfigure}
    \usepackage{hyperref}
    % hypertexnames is set to false.
  v2.1:
    \usepackage{nameref}
    \usepackage{subfigure}
    \usepackage{hyperref}
    or
    \usepackage{hyperref}
    \usepackage{subfigure}
  v2.1.2:
    please update
  v2.1.3:
    \usepackage{hyperref}
    \usepackage{subfigure}
    or vice versa?
\end{verbatim}

\subsubsection{titleref}
\begin{verbatim}
 \usepackage{nameref}
  \usepackage{titleref}% without usetoc
  \usepackage{hyperref}
\end{verbatim}

\subsubsection{tabularx}

 Linked footnotes are not supported inside environment `tabularx',
  because they uses the optional argument of \verb|\footnotetext|, see
  section `Limitations'. Before version 2011/09/28 6.82i
  hyperref had disabled footnotes entirely by `hyperfootnotes=false'.


\subsubsection{titlesec}

 \xpackage{nameref} supports titlesec, but hyperref does not
  (unsolved is the anchor setting, missing with unnumbered
  section, perhaps problems with page breaks with numbered ones).


\subsubsection{ucs/utf8x.def}

 The first time a multibyte UTF8 sequence is called, it
  does some calculations and stores the result in a macro
  for speeding up the next calls of that UTF8 sequence.
  However this makes the first call non-expandable and
  will break if used in information entries or bookmarks.
  Package \xpackage{ucs} offers \verb|\PrerenderUnicode| or \verb|\PreloadUnicodePage|
  to solve this:
\begin{verbatim}
    \usepackage{ucs}
    \usepackage[utf8x]{inputenc}
    \usepackage{hyperref}% or with option unicode
    \PrerenderUnicode{^^c3^^b6}% or \PrerenderUnicodePage{1}
    \hypersetup{pdftitle={Umlaut example: ^^c3^^b6}}
\end{verbatim}
  The notation with two carets avoids trouble with 8-bit bytes
  for the README file, you can use the characters directly.


\subsubsection{varioref}
 There are too many problems with varioref. Nobody has time to
  sort them out. Therefore this package is now unsupported.


 Perhaps you are lucky and some of the features of varioref works
  with the following loading order:
\begin{verbatim}
    \usepackage{nameref}
    \usepackage{varioref}
    \usepackage{hyperref}
\end{verbatim}


 Also some babel versions can be problematic. For exmample,
  2005/05/21 v3.8g contains a patch for varioref that breaks
  the hyperref support for varioref.



 Also unsupported:
\begin{itemize}
\item   \verb|\Ref|, \verb|\Vref| do not uppercase the first letter.
\item \verb|\vpageref[]{...}|
    On the same page a previous space is not suppressed.
\end{itemize}

\subsubsection{verse}

 Version 2005/08/22 v2.22 contains support for hyperref.

  For older versions see example from
  de.comp.text.tex (2005/08/11, slightly modified):

\begin{verbatim}
  \documentclass{article}

  % package order does not matter
  \usepackage{verse}
  \usepackage{hyperref}

  \makeatletter
  % make unique poemline anchors
  \newcounter{verse@env}
  \setcounter{verse@env}{0}
  \let\org@verse\verse
  \def\verse{%
    \stepcounter{verse@env}%
    \org@verse
  }
  \def\theHpoemline{\arabic{verse@env}.\thepoemline}

  % add anchor for before \addcontentsline in \@vsptitle
  \let\org@vsptitle\@vsptitle
  \def\@vsptitle{%
    \phantomsection
    \org@vsptitle
  }
  \makeatother

  \begin{document}

  \poemtitle{Poem 1}
  \begin{verse}
  An one-liner.
  \end{verse}

  \newpage

  \poemtitle{Poem 2}
  \begin{verse}
  Another one-liner.
  \end{verse}

  \end{document}
\end{verbatim}

\subsubsection{vietnam}
\begin{verbatim}
 % pd1enc.def should be loaded before package dblaccnt:
  \usepackage[PD1,OT1]{fontenc}
  \usepackage{vietnam}
  \usepackage{hyperref}
\end{verbatim}

\subsubsection{XeTeX}

 Default for the encoding of bookmarks is `pdfencoding=auto'.
 That means the strings are always treated as unicode strings.
 Only if the string restricts to the printable ASCII set,
  it is written as ASCII string. The reason is that the
  \verb|\special| does not support PDFDocEncoding.

 In older versions hyperref contained special conversion code from
 UTF-16BE back to UTF-8 in a number of places for
 xetex to avoid the xdvipdfmx warning 
 
   \verb"Failed to convert input string to UTF16..."
   
 This is no longer needed with a current xdvipdfmx, so this code has
 been removed. \verb|\csname HyPsd@XeTeXBigCharstrue\endcsname| should no
 longer be used.    


\section[Limitations]{Limitations%
\footnote{This section moved from the README file, needs more integration into the manual}}
\subsection{Wrapped/broken link support}

 Only few drivers support automatically wrapped/broken links,
  e.g. pdftex, dvipdfm, hypertex. Other drivers lack this
  feature, e.g. dvips, dvipsone.

  Workarounds:
\begin{itemize}
\item For long section or caption titles in the table of contents
    or list of figures/tables option \xoption{linktocpage} can be used.
    Then the page number will be a link, and the overlong section
    title is not forced into an one line link with overfull \verb|\hbox|
    warning.
\item ``\verb|\url|''s are caught by package \xpackage{breakurl}.
\item  The option \xoption{breaklinks} is intended for internal use. But it
    can be used to force link wrapping, e.g. when printing a
    document. However, when such a document is converted to PDF
    and viewed with a PDF viewer, the active link area will be
    misplaced.

      Another limitation: some penalties are ``optimized'' by TeX,
    thus there are missing break points, especially within
    \verb|\url|. (See thread ``hyperref.sty, breaklinks and url.sty 3.2''
    in comp.text.tex 2005-09).
\end{itemize}

\subsection{Links across pages}

 In general they have problems:
\begin{itemize}
  \item Some driver doesn't support them at all (see above).
  \item The driver allows it, but the link result might include
    the footer and/or header, or an error message can
    occur sometimes.
\end{itemize}

\subsection{Footnotes}

 LaTeX allows the separation of the footnote mark and the
  footnote text (\verb|\footnotemark|, \verb|\footnotetext|). This interface
  might be enough for visual typesetting. But the relation between
  \verb|\footnotemark| to \verb|\footnotetext| is not as strong as \verb|\ref| to \verb|\label|.
  Therefore it is not clear in general which \verb|\footnotemark| references
  which \verb|\footnotetext|. But that is necessary to implement hyperlinking.
  Thus the implementation of hyperref does not support the optional
  argument of \verb|\footnotemark| and \verb|\footnotetext|.


\section[Hints]{Hints%
\footnote{This section moved from the README file, needs more integration into the manual}}

\subsection{Spaces in option values}

 Unhappily LaTeX strips spaces from options if they are given
  in \verb|\documentclass| or \verb|\usepackage| (or \verb|\RequirePackage|), e.g.:
\begin{verbatim}
    \usepackage[pdfborder=0 0 1]{hyperref}
\end{verbatim}
  Package hyperref now gets
\begin{verbatim}
    pdfborder=001
\end{verbatim}
  and the result is an invalid PDF file.
  As workaround braces can be used:
\begin{verbatim}
    \usepackage[pdfborder={0 0 1}]{hyperref}
\end{verbatim}
  Some options can also be given in \verb|\hypersetup|
\begin{verbatim}
    \hypersetup{pdfborder=0 0 1}
\end{verbatim}
  In \verb|\hypersetup| the options are directly processed as key value
  options (see package keyval) without space stripping in the value part.



 Alternatively, LaTeX's option handling system can be adapted
  to key value options by one of the packages \xpackage{kvoptions-patch}
  (from project \xpackage{kvoptions}) or \xpackage{xkvltxp} (from project \xpackage{xsetkeys}).


\subsection{Index with makeindex}
\begin{itemize}
 \item Package hyperref adds \verb|\hyperpage| commands by the encap
    mechanism (see documentation of Makeindex),
    if option hyperindex is set (default).
    \verb|\hyperpage| uses the page anchors that are set by
    hyperref at each page (default). However in the
    default case page numbers are used in anchor names
    in arabic form. If the page numbers in other formats
    are used (book class with \verb|\frontmatter|, \verb|\romannumbering|, ...),
    then the page anchors are not unique. Therefore option
    \verb"plainpages=false" is recommended.
 \item The encap mechanism of Makeindex allows to use one command only
    (see documentation of Makeindex).
    If the user sets such a command, hyperref suppresses its
    \verb|\hyperpage| command. With logical markup this situation
    can easily be solved:
\begin{verbatim}
      \usepackage{makeidx}
      \makeindex
      \usepackage[hyperindex]{hyperref}
      \newcommand*{\main}[1]{\textbf{\hyperpage{#1}}}
      ...
      \index{Some example|main}
\end{verbatim}
  \item Scientic Word/Scientific WorkPlace users can use
    package robustindex with hyperindex=false.
  \item Other encap characters can be set by option \xoption{encap}.
    Example for use of ``?'':
\begin{verbatim}
      \usepackage[encap=?]{hyperref}
\end{verbatim}
  \item Another possibility is the insertion of \verb|\hyperpage| by
    a style file for makeindex. For this case, hyperref's
    insertion will be disabled by \verb"hyperindex=false".
    \verb|\hyperpage| will be defined regardless of setting of hyperindex.
\begin{verbatim}
%%% cut %%% hyperindex.ist %%% cut %%%
delim_0 ", \\hyperpage{"
delim_1 ", \\hyperpage{"
delim_2 ", \\hyperpage{"
delim_n "}, \\hyperpage{"
delim_t "}"
encap_prefix "}\\"
encap_infix "{\\hyperpage{"
encap_suffix "}"
%%% cut %%% hyperindex.ist %%% cut %%%
\end{verbatim}
\end{itemize}

\subsection{Warning \texttt{"bookmark level for unknown <foobar> defaults to 0"}}

 Getting rid of it:
\begin{verbatim}
\makeatletter
\providecommand*{\toclevel@<foobar>}{0}
\makeatother
\end{verbatim}

\subsection{Link anchors in figures}

 The caption command increments the counter and here is the
  place where hyperref set the corresponding anchor. Unhappily
  the caption is set below the figure, so the figure is not
  visible if a link jumps to a figure.
    In this case, try package \xpackage{hypcap} that implements
  a method to circumvent the problem.


\subsection{Additional unicode characters in bookmarks and pdf information entries:}
\begin{verbatim}
\documentclass[pdftex]{article}
\usepackage[unicode]{hyperref}
\end{verbatim}

Support for additional unicode characters:

 Example: \verb|\.{a}| and \verb|\d{a}|

 1. Get a list with unicode data, eg:

    http://www.unicode.org/Public/UNIDATA/UnicodeData.txt

 2. Identify the characters (\verb|\.{a}|, \verb|\d{a}|):
\begin{verbatim}
    0227;LATIN SMALL LETTER A WITH DOT ABOVE;...
    1EA1;LATIN SMALL LETTER A WITH DOT BELOW;...
\end{verbatim}

 3. Calculate the octal code:

    The first characters of the line in the file are
    hex values, convert each byte and prepend them
    with a backslash. (This will go into the PDF file.)

\begin{verbatim}
    0227 -> \002\047
    1EA1 -> \036\241
\end{verbatim}

 4. Transform into a form understood by hyperref:

    Hyperref must know where the first byte starts,
    this is marked by \verb"9" (8 and 9 cannot occur in
    octal numbers):

\begin{verbatim}
    \002\047 -> \9002\047
    \036\241 -> \9036\241
\end{verbatim}

    Optional: \verb"8" is used for abbreviations:

\begin{verbatim}
    \900 = \80, \901 = \81, \902 = \82, ...

    \9002\047 -> \82\047
\end{verbatim}

 5. Declare the character with LaTeX:

\begin{verbatim}
\DeclareTextCompositeCommand{\.}{PU}{a}{\82\047}
\DeclareTextCompositeCommand{\d}{PU}{a}{\9036\241}

\begin{document}
\section{\={a}, \d{a}, \'{a}, \.{a}}
\end{document}
      \end{verbatim}

\subsection{Footnotes}

 The footnote support is rather limited. It is beyond the scope
  to use \verb|\footnotemark| and \verb|\footnotetext| out of order or reusing
  \verb|\footnotemark|. Here you can either disable hyperref's footnote
  support by \verb"hyperfootnotes=false" or fiddle with internal macros,
  nasty examples:

\begin{verbatim}
\documentclass{article}
\usepackage{hyperref}
\begin{document}
Hello%
\footnote{The first footnote}
World%
\addtocounter{footnote}{-1}%
\addtocounter{Hfootnote}{-1}%
\footnotemark.
\end{document}

  or

\documentclass{article}

\usepackage{hyperref}

\begin{document}

\makeatletter

A%
  \footnotemark
  \let\saved@Href@A\Hy@footnote@currentHref
  % remember link name
B%
  \footnotemark
  \let\saved@Href@B\Hy@footnote@currentHref
b%
  \addtocounter{footnote}{-1}%
  \addtocounter{Hfootnote}{-1}% generate the same anchor
  \footnotemark
C%
  \footnotemark
  \let\saved@Href@C\Hy@footnote@currentHref

  \addtocounter{footnote}{-2}%
  \let\Hy@footnote@currentHref\saved@Href@A
\footnotetext{AAAA}%
  \addtocounter{footnote}{1}%
  \let\Hy@footnote@currentHref\saved@Href@B
\footnotetext{BBBBB}%
  \addtocounter{footnote}{1}%
  \let\Hy@footnote@currentHref\saved@Href@C
\footnotetext{CCCC}%

\end{document}
\end{verbatim}

\subsection{Subordinate counters}

 Some counters do not have unique values and require the value
  of other counters to be unique. For example, sections or figures
  might be numbered within chapters or \verb|\newtheorem| is used with
  an optional counter argument. Internally LaTeX uses \verb|\@addtoreset|
  to reset a counter in dependency to another counter. Package
  hyperref hooks into \verb|\@addtoreset| to catch this situation.
  Also \verb|\numberwithin| of package amsmath is caught by hyperref.



 However, if the definition of subordinate counters take place
  before hyperref is loaded, the old meaning of \verb|\@addtoreset| is
  called without hyperref's additions. Then the companion counter
  macro \verb|\theH<counter>| can be redefined accordingly. Or move the
  definition of subordinate counters after hyperref is loaded.

 Example for \verb|\newtheorem|, problematic case:
\begin{verbatim}
    \newtheorem{corA}{CorollaryA}[section]
    \usepackage{hyperref}
\end{verbatim}
  Solution a)
\begin{verbatim}
    \usepackage{hyperref}
    \newtheorem{corA}{CorollaryA}[section}
\end{verbatim}
  Solution b)
\begin{verbatim}
    \newtheorem{corA}{CorollaryA}[section]
    \usepackage{hyperref}
    \newcommand*{\theHcorA}{\theHsection.\number\value{corA}}
\end{verbatim}

\section{History and acknowledgments}

The original authors of \textsf{hyperbasics.tex} and
\textsf{hypertex.sty}, from which this package descends, are Tanmoy
Bhattacharya and Thorsten Ohl. Package \xpackage{hyperref}
started as a simple port of their work to \hologo{LaTeXe} standards, but
eventually I rewrote nearly everything, because I didn't understand a
lot of the original, and was only interested in getting it to work with
\hologo{LaTeX}. I would like to thank Arthur Smith, Tanmoy Bhattacharya, Mark
Doyle, Paul Ginsparg, David Carlisle, T.\ V.\ Raman and Leslie Lamport
for comments, requests, thoughts and code to get the package into its
first useable state. Various other people are mentioned at the point in
the source where I had to change the code in later versions because of
problems they found.

Tanmoy found a great many of the bugs, and (even better) often provided
fixes, which has made the package more robust. The days spent on
Rev\TeX\ are entirely due to him! The investigations of Bill Moss
into the later versions including
native PDF support uncovered a good many bugs, and his testing is
appreciated. Hans Hagen provided a lot of
insight into PDF.

Berthold Horn provided help, encouragement and sponsorship for the
\textsf{dvipsone} and \textsf{dviwindo} drivers. Sergey Lesenko provided
the changes needed for \textsf{dvipdf}, and \Hanh{} supplied all the
information needed for \textsf{pdftex}. Patrick Daly kindly updated his
\xpackage{natbib} package to allow easy integration with
\xpackage{hyperref}. Michael Mehlich's \xpackage{hyper} package (developed
in parallel with \textsf{hyperref}) showed me solutions for some
problems. Hopefully the two packages will combine one day.

The forms creation section owes a great deal to: T.\ V.\ Raman, for
encouragement, support and ideas; Thomas Merz, whose book \emph{Web
Publishing with Acrobat/PDF} provided crucial insights; D.\ P.\ Story,
whose detailed article about pdfmarks and forms solved many practical
problems; and Hans Hagen, who explained how to do it in \textsf{pdftex}.

Steve Peter recreated the manual source in July 2003 after it had been
lost.

Especial extra thanks to David Carlisle for the \xpackage{backref} module,
the ps2pdf and dviwindo support, frequent general rewrites of my bad
code, and for working on changes to the \xpackage{xr} package to suit
\xpackage{hyperref}.

\begingroup
  \makeatletter
  \let\chapter=\section
  % subsections goes into bookmarks but not toc
  \hypersetup{bookmarksopenlevel=1}
  \addtocontents{toc}{\protect\setcounter{tocdepth}{1}}
  % The \section command acts as \subsection.
  % Additionally the title is converted to lowercase except
  % for the first letter.
  \def\section{%
    \let\section\lc@subsection
    \lc@subsection
  }
  \def\lc@subsection{%
    \@ifstar{\def\mystar{*}\lc@sec}%
            {\let\mystar\@empty\lc@sec}%
  }
  \def\lc@sec#1{%
    \lc@@sec#1\@nil
  }
  \def\lc@@sec#1#2\@nil{%
    \begingroup
      \def\a{#1}%
      \lowercase{%
        \edef\x{\endgroup
          \noexpand\subsection\mystar{\a#2}%
        }%
      }%
    \x
  }
  \include{fdl}
\endgroup

\end{document}