path: root/macros/latex/contrib/caption/bicaption.dtx

% \iffalse meta-comment
% 
% This is file `bicaption.dtx'.
% 
% Copyright (C) 2010-2022 Axel Sommerfeldt (axel.sommerfeldt@f-m.fm)
% 
% --------------------------------------------------------------------------
% 
% This work may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either version 1.3
% of this license or (at your option) any later version.
% The latest version of this license is in
%   http://www.latex-project.org/lppl.txt
% and version 1.3 or later is part of all distributions of LaTeX
% version 2003/12/01 or later.
% 
% This work has the LPPL maintenance status "maintained".
% 
% This Current Maintainer of this work is Axel Sommerfeldt.
% 
% This work consists of the files
%   caption.ins, caption.dtx, caption-light.dtx, caption2.dtx, caption3.dtx,
%   caption-ams-smf.dtx, caption-beamer.dtx, caption-elsarticle.dtx,
%   caption-koma.dtx, caption-memoir.dtx, caption-ntg.dtx,
%   caption-thesis.dtx, bicaption.dtx, ltcaption.dtx, subcaption.dtx,
% the derived files
%   caption.sty, caption-light.sty, caption2.sty, caption3.sty,
%   caption-ams-smf.sto, caption-beamer.sto, caption-elsarticle.sto,
%   caption-koma.sto, caption-memoir.sto, caption-ntg.sto,
%   caption-thesis.sto, bicaption.sty, ltcaption.sty, subcaption.sty.
% 
% \fi
%
% \CheckSum{626}
%
% \iffalse
%<*driver>
\NeedsTeXFormat{LaTeX2e}[1994/12/01]
\ProvidesFile{bicaption.drv}[2022/03/06 v1.5 Adds a bilingual caption feature to the caption package]
\hbadness=9999 \newcount\hbadness \hfuzz=74pt % Make TeX shut up.
%\errorcontextlines=3
%
\documentclass[german,english]{ltxdoc}
\setlength\parindent{0pt}
\setlength\parskip{\smallskipamount}
%
\usepackage{ifpdf}
\ifpdf
  \usepackage{mathptmx,courier}
  \usepackage[scaled=0.90]{helvet}
  \addtolength\marginparwidth{15pt}
\fi
%
\usepackage[T1]{fontenc}
\usepackage[german,english]{babel}
%\usepackage{selinput}\SelectInputMappings{adieresis={ä},germandbls={ß}}
\usepackage[utf8]{inputenc}
%
\usepackage[bottom]{footmisc}
%
\usepackage{hypdoc}
\ifpdf\usepackage{hypdestopt}\fi
\hypersetup{pdfkeywords={LaTeX, package, bicaption},pdfstartpage={},pdfstartview={}}
%
\usepackage{bicaption}[2016/03/27]
\usepackage{subcaption}[2016/02/21]
%
\newcommand*\purerm[1]{{\upshape\mdseries\rmfamily #1}}
\newcommand*\puresf[1]{{\upshape\mdseries\sffamily #1}}
\newcommand*\purett[1]{{\upshape\mdseries\ttfamily #1}}
\let\package\puresf
\let\env\purett \let\opt\purett
%
\newcommand*\csmarg[1]{\texttt{\char`\{#1\char`\}}}
\newcommand*\csoarg[1]{\texttt{\char`\[#1\char`\]}}
\newcommand*\version[2][]{v$#2$}
%
\usepackage{marvosym}
\makeatletter
\newcommand*\INFO{\@ifstar{\@INFO{}}{\@INFO{\vbox to \ht\strutbox}}}
\newcommand*\@INFO[1]{\MARGINSYM{#1{\LARGE\Info}}}
\makeatother
%
\usepackage[alpine]{ifsym}
\newenvironment{background}{\par\bigskip\csname background*\endcsname}{\csname endbackground*\endcsname}
\newenvironment{background*}{\small\MARGINSYM{\Mountain}\ignorespaces}{\par}
%
\makeatletter
\newcommand*\MARGINSYM[1]{\hskip 1sp \marginpar{\raggedleft\textcolor{blue}{{#1}}}}
\newcommand*\NEW[1]{\@ifstar{\@NEW{#1}{\vskip2pt}}{\@NEW{#1}{}}}
\newcommand*\@NEW[3]{\MARGINSYM{#2\footnotesize#1\\#3}}
\makeatother
%
\newenvironment{Options}[1]%
  {\list{}{\renewcommand\makelabel[1]{\texttt{##1}\hfil}%
   \settowidth\labelwidth{\texttt{#1\space}}%
   \setlength\leftmargin{10pt}%
   \addtolength\leftmargin{\labelwidth}%
   \addtolength\leftmargin{\labelsep}}}%
  {\endlist}
%
\begin{document}
  \DocInput{bicaption.dtx}
\end{document}
%</driver>
% \fi
%
% \let\subsectionautorefname\sectionautorefname
% \let\subsubsectionautorefname\sectionautorefname
%
% \def\thispackage{the \package{bicaption} package}
% \def\Thispackage{The \package{bicaption} package}
%
% \newcommand\NEWfeature{\NEW{New feature}}
% \newcommand\NEWdescription{\NEW{New description}}
%
% \GetFileInfo{bicaption.drv}
% \let\docdate\filedate
% \let\docversion\fileversion
% \GetFileInfo{bicaption.sty}
%
% \title{\texorpdfstring{\Thispackage\thanks{%^^A
%          This package has version number \docversion.}}%^^A
%        {The bicaption package}}
% \author{Axel Sommerfeldt\\
%         \url{https://gitlab.com/axelsommerfeldt/caption}}
% \date{\docdate}
% \maketitle
% 
% \begin{abstract}
% This package supports the typesetting of bilangual captions.
% \end{abstract}
%
% \setcounter{tocdepth}{2}
% \tableofcontents
%
% \clearpage
% \section{Loading the package}
% \label{sec:loading}
%
% This package will be loaded by
% \begin{quote}
%   |\usepackage|\oarg{options}|{bicaption}|\quad.
% \end{quote}
% The options for \thispackage\ are the same ones as for the \package{caption}
% package and specify settings which are used for the second language
% \emph{additionally}.
% In fact
% \begin{quote}
%   |\usepackage|\oarg{options}|{bicaption}|
% \end{quote}
% is identical to
% \begin{quote}
%   |\usepackage{bicaption}|\\
%   |\captionsetup[bi-second]|\marg{options}\quad.
% \end{quote}
%
% When used with the \package{babel} or \package{polyglossia} package, the
% \package{bicaption} package should be loaded \emph{after} it, so the main
% language will be set automatically. See \autoref{sec:babel} for details.
%
% \section{Setting options}
% \label{sec:options}
%
% \DescribeMacro\captionsetup
% The command
% \begin{quote}
%   |\captionsetup[bi]|\marg{options}
% \end{quote}
% does setup options which will be used for bilanguage captions \emph{additionally}
% to the ones which are setup for the specific floating environment.
%
% \begin{quote}
%   |\captionsetup[bi-first]|\marg{options}
% \end{quote}
% does setup options which will be used for the \emph{first} heading
% of the bilanguage captions \emph{additionally}
% to the ones which are setup for the specific floating environment
% and the ones which are setup by |\captionsetup[bi]{|\ldots|}|.
%
% \begin{quote}
%   |\captionsetup[bi-second]|\marg{options}
% \end{quote}
% does setup options which will be used for the \emph{second} heading
% of the bilanguage captions \emph{additionally}
% to the ones which are setup for the specific floating environment
% and the ones which are setup by |\captionsetup[bi]{|\ldots|}|.
%
% \bigskip
%
% Options specified with |\use|\-|package[|\ldots|]{bi|\-|cap|\-|tion}| and
% |\cap|\-|tion|\-|setup[bi|\ldots|]{|\ldots|}| will override the ones specified by
% |\cap|\-|tion|\-|setup{|\ldots|}| and |\cap|\-|tion|\-|setup[fig|\-|ure]{|\ldots|}|
% (same for `table'). So finally we have the following order how
% settings for bilingual captions are applied:
% \begin{enumerate}
% \item Global settings
%  {\small(|\usepackage[|\ldots|]{caption}| and |\captionsetup{|\ldots|}|)}
% \item Environmental settings
%  {\small(|\captionsetup[figure|\emph{ -or- }|table]{|\ldots|}|)}
% \item Local settings
%  {\small(|\captionsetup{|\ldots|}| inside |figure| or |table| environment)}
% \item Custom `bi' settings
%  {\small(|\captionsetup[bi]{|\ldots|}|)}
% \item Custom `bi-first' resp.~`bi-second' settings
%  {\small(|\usepackage[|\ldots|]{bicaption}| and
%          |\caption|\-|setup[bi-first]{|\ldots|}|
%    resp.~|\caption|\-|setup[bi-second]{|\ldots|}|)}
% \end{enumerate}
% An example:
% \begin{quote}
%   |\usepackage[labelsep=quad,indention=10pt]{caption}|\\
%   |\usepackage[labelfont=bf]{bicaption}|\\
%   |\captionsetup[table]{labelfont=it,position=top}|
% \end{quote}
% causes the second heading of the bilingual caption inside |table| environments
% to be typeset with the settings
% \begin{quote}
%   |labelsep=quad,indention=10pt,position=top,labelfont=bf|~.
% \end{quote}
%
% \bigskip
%
% To limit |bi|, |bi-first|, or |bi-second| options to specific environments one can use
% multiple optional arguments for |\caption|\-|setup|, e.g.:
% \begin{quote}
%   |\captionsetup[figure][bi-first]|\oarg{options}
% \end{quote}
% will limit the settings to the first heading of |figure| environments only.
% Please note that the environment name (|figure|, |table|, \ldots) has to be specified
% as first optional argument while the bilingual selection (|bi|, |bi-first|, or |bi-second|)
% as second one.
%
% \section{Additional options}
% \label{sec:additional-options}
%
% These options are available additional to the ones offered by the
% \package{caption} package:
%
% \begin{Options}{language=}
%   \item[lang=]
%   Sets the language of the caption, e.g.
%   \begin{quote}|\use|\-|package|\-|[lang=eng|\-|lish]{bi|\-|caption}|\end{quote}
%   will typeset the second caption of bilingual captions in English.
%   (The language will be set with |\select|\-|caption|\-|language| internally,
%    see \autoref{sec:babel} for details.)
%
%   \item[bi-lang=]
%   Causes a selection of the headings of bilingual captions.
%   \begin{quote}|\captionsetup{bi-lang=both}|\end{quote}
%   will cause that both caption headings are being typeset.\\
%   (This is the default.)
%   \begin{quote}|\captionsetup{bi-lang=first}|\end{quote}
%   will cause that only the \emph{first} heading is being typeset, and
%   \begin{quote}|\captionsetup{bi-lang=second}|\end{quote}
%   will cause that only the \emph{second} heading is being typeset.
%
%   \item[bi-slc=]
%   \begin{quote}|\captionsetup{bi-slc=|\meta{bool}|}|\end{quote}
%   switches the common single-line-check |on| or |off|, i.e.~when switched on
%   only a single check will be done for both captions, and the result will affect
%   both captions afterwards. So if only one caption is longer than a single line,
%   both captions will be treated as if they are longer than a single line, even if
%   the second one isn't. (The default is |on|.)
%
%   \item[bi-swap=]
%   \begin{quote}|\captionsetup{bi-swap}|\end{quote}
%   will swap the primary and secondary language,
%   making the first language the second one and vice versa. (The default is |false|.)
%
%   \item[bi-separator=]
%   \NEWfeature{v1.3}
%   The vertical distance between the first and second bilingual caption is usually
%   determined by the \TeX\ skips set by |\normal|\-|size| which is applied right
%   before both captions get typesetted.
%   (This behaviour is inherited from the original \LaTeX\ code for |\caption| which
%   applies |\normal|\-|size| right before |\@make|\-|caption|, too.)
%   \begin{quote}|\captionsetup{bi-separator=|\meta{name}|}|\end{quote}
%   will select an additional separator between first and second bilingual caption.
%   You could choose one of the following: `none' (which is the default one
%   and could also be addressed as `default'), `smallskip', `medskip',
%   `largeskip', or a self-defined one using
%   \DescribeMacro{\DeclareBiCaption-\\Separator}
%   \begin{quote}|\DeclareBiCaptionSeparator|\marg{name}\marg{code}\end{quote}
%   Examples:
%   \begin{quote}
%     |\captionsetup{bi-separator=smallskip}|
%   \end{quote}
%   will put a |\smallskip| between the two bilingual captions.
%   \begin{quote}
%     |\DeclareBiCaptionSeparator{hrule}{\hrule}|\\
%     |\captionsetup{bi-separator=hrule}|
%   \end{quote}
%   will draw a horizontal line between the two bilingual captions.
%   \begin{quote}
%     |\DeclareBiCaptionSeparator{3pt}{\vspace{3pt}}|\\
%     |\captionsetup{bi-separator=3pt}|
%   \end{quote}
%   will place |3pt| extra vertical space between the two bilingual captions.
%   \par\medskip
%   \textit{Note:} In contrast to the original \LaTeX\ code for |\caption| the
%   \package{caption} package does not apply |\normal|\-|size| directly
%   but will apply the caption font definition |normal|\-|size| instead
%   (which is usually defined as |\normal|\-|size|).
%   Therefore the vertical space between both captions
%   could also be influenced by redefining it, e.g.:
%   |\Declare|\-|Caption|\-|Font{normal|\-|size}{|\ldots|}|
% \end{Options}
%
% \section{The \cs{bicaption} commands}
% \label{sec:bicaption}
%
% \DescribeMacro\bicaption
% Bilingual captions will be typeset by
% \begin{quote}
%   |\bicaption|\oarg{list entry \#1}\marg{heading \#1}\\
%   |          |\oarg{list entry \#2}\marg{heading \#2}\\
%   |\bicaption*|\marg{heading \#1}\marg{heading \#2}
% \end{quote}
% The |\label| should be placed either after this command, or inside the first heading.
%
% \DescribeMacro\bicaptionbox
% Bilingual caption boxes will be typeset by
% \begin{quote}
%   |\bicaptionbox|\oarg{list entry \#1}\marg{heading \#1}\\
%   |             |\oarg{list entry \#2}\marg{heading \#2}\\
%   |             |\oarg{width}\oarg{inner-pos}\marg{contents}\\
%   |\bicaptionbox*|\marg{heading \#1}\marg{heading \#2}\\
%   |              |\oarg{width}\oarg{inner-pos}\marg{contents}
% \end{quote}
% The |\label| should be placed inside the first heading.
%
% \begingroup\small
% (For a description of the optional parameters \meta{width} and \meta{inner-pos}
% please take a look at the \package{caption} package documentation,
% \cs{captionbox}.)
% \endgroup
%
% \pagebreak[3]
% \section{Customising lists}
% \label{sec:lists}
%
% \DescribeMacro{list=}
% As default both caption texts will be insert into the List of Figures resp. List of Tables.
% To suppress the second entry just pass the option |list=off| to the \package{bicaption}
% package, e.g.:
% \begin{quote}
%   |\usepackage[lang=english,|\ldots|,list=off]{bicaption}|
% \end{quote}
%
% \pagebreak[3]
% \DescribeMacro{listtype+=}
% Another option is separating the lists. For that purpose the option
% \begin{quote}
%   |listtype+=|\meta{list type extension}
% \end{quote}
% can be used to tell the \package{bicaption} package to use a different list
% for the second caption text.
% The given value will be appended to the current environment type;
% for example with |listtype+=X| the list entries will be put into the list
% responsible for the types
% |figureX| ($=$ |figure| $+$ |X|), |tableX| ($=$ |table| $+$ |X|) etc.
%
% Such a \meta{list type} can be defined using |\Declare|\-|Floating|\-|Environment|
% offered by the \package{newfloat} package, but some document classes
% or other packages offer macros for defining new floating environment types
% (and their corresponding lists) as well.
%
% A sample document:
% \begin{quote}
%   |\documentclass[a4paper]{article}|\\
%   ||\\
%   |% Use "ngerman" as 1st language, "english" as 2nd one|\\
%   |\usepackage[english,ngerman]{babel}|\\
%   ||\\
%   |% Load the bicaption package with 2nd language set to|\\
%   |% "english", and list type "figureEng" resp. "tableEng"|\\
%   |\usepackage[lang=english,listtype+=Eng]{bicaption}|\\
%   ||\\
%   |\usepackage{newfloat}|\\
%   |% Define type "figureEng" and \listoffigureEng|\\
%   |\DeclareFloatingEnvironment[fileext=lof2]{figureEng}|\\
%   |                   [Figure][List of Figures]|\\
%   |% Define type "tableEng" and \listoftableEng|\\
%   |\DeclareFloatingEnvironment[fileext=lot2]{tableEng}|\\
%   |                   [Table][List of Tables]|\\
%   ||\\
%   |\begin{document}|\\
%   ||\\
%   |\listoffigures    % typeset "Abbildungsverzeichnis"|\\
%   |\listoffigureEng  % typeset "List of Figures"|\\
%   ||\\
%   |\begin{figure}|\\
%   |  \centering|\\
%   |  A placeholder for an image or whatever|\\
%   |  \bicaption{Deutscher Text}{English text}|\\
%   |\end{figure}|\\
%   ||\\
%   |\end{document}|
% \end{quote}
%
% \pagebreak[3]
% A different approach is using one list for both languages, but with different formatting.
% Since the \package{caption} package does not offer options and commands for
% customising the format of the lists, one need an additional package for this purpose,
% for example the \package{titletoc} package:
%
% \begin{quote}
%   |\documentclass[a4paper]{article}|\\
%   ||\\
%   |% Use "ngerman" as 1st language, "english" as 2nd one|\\
%   |\usepackage[english,ngerman]{babel}|\\
%   ||\\
%   |% Load the bicaption package with 2nd language set to|\\
%   |% "english", and list type "figure2" resp. "table2"|\\
%   |\usepackage[lang=english,listtype+=2]{bicaption}|\\
%   ||\\
%   |% We load the titletoc package for customizing lists|\\
%   |% Note: Loading titletoc should be done prior|\\
%   |% defining additional floating environments with|\\
%   |% \DeclareFloatingEnvironment|\\
%   |\usepackage{titletoc}|\\
%   ||\\
%   |\usepackage{newfloat}|\\
%   |% Define the new floating environment type "figure2"|\\
%   |% Use the same file extension as for "figure" (.lof) here|\\
%   |\DeclareFloatingEnvironment[fileext=lof]{figure2}|\\
%   |% Define the new floating environment type "table2"|\\
%   |% Use the same file extension as for "table" (.lot) here|\\
%   |\DeclareFloatingEnvironment[fileext=lot]{table2}|\\
%   ||\\
%   |% We use the titletoc package for customizing "figure2"|\\
%   |% which is appropriate for the second language captions|\\
%  \iffalse
%   |\contentsuse{figure2}{lof}|\\
%  \fi
%   |\titlecontents{figure2}[3.8em]|\\
%   |  {} % no above code|\\
%   |  {} % empty numbered entry format|\\
%   |  {} % empty numberless entry format|\\
%   |  {} % empty filler page format|\\
%   ||\\
%   |\begin{document}|\\
%   ||\\
%   |\renewcommand\listfigurename|\\
%   |  {Abbildungsverzeichnis / List of Figures}|\\
%   |\listoffigures|\\
%   ||\\
%   |\begin{figure}|\\
%   |  \centering|\\
%   |  A placeholder for an image or whatever|\\
%   |  \bicaption{Deutscher Text}{English text}|\\
%   |\end{figure}|\\
%   ||\\
%   |\end{document}|
% \end{quote}
%
% \section{Language Selection}
% \label{sec:babel}
%
% For language selection \thispackage\ uses two macros internally:
%
% \medskip
%
% \DescribeMacro\captionmainlanguage
% |\caption|\-|main|\-|lan|\-|guage| contains the main language, for example
% `french' or `german'.
% If not set manually, \thispackage\ will try to obtain this setting from
% the \package{babel} or \package{polyglossia} package after the preamble of
% the document, i.e.~at |\begin{doc|\-|u|\-|ment}|.
%
% So if you are using either \package{babel} or \package{polyglossia}, and want to inherit
% the main language setting from it, then simply forget about the
% |\caption|\-|main|\-|lan|\-|guage| stuff and skip the rest of the section.
%
% \pagebreak[3]
% Otherwise one can define |\caption|\-|main|\-|lan|\-|guage| manually, e.g.:
% \begin{quote}
%   |\newcommand\captionmainlanguage{french}|\\
%   |\usepackage[lang=english]{bicaption}|
% \end{quote}
%
% \pagebreak[3]
% Note: Prior to \version{1.5} |\caption|\-|main|\-|language| needed to be defined
% \emph{before} loading \thispackage. Since \version{1.5} is could be defined either
% before or after loading \thispackage.
%
% \medskip
%
% \DescribeMacro\selectcaptionlanguage
% \NEWfeature*{v1.1}
% |\select|\-|caption|\-|lan|\-|guage| will be used internally  to select the language:
% \begin{quote}
%   |\selectcaptionlanguage|\marg{font-or-list-entry}\marg{language}
% \end{quote}
% For setting the language of the caption \meta{font-or-list-entry} will be |\@first|\-|of|\-|two|,
% for setting the language of the list entry \meta{font-or-list-entry} will be
% |\@second|\-|of|\-|two|.~\footnote{\cs{@firstoftwo} and \cs{@secondoftwo} are defined
% in the \LaTeX\ kernel and simply pick either the 1st or 2nd argument.}
% It defaults to |\select@lan|\-|guage| (caption) resp.~|\select|\-|lan|\-|guage| (list entry)
% offered by the \package{babel} and \package{polyglossia} package:
% \begin{quote}
%   |\providecommand*\selectcaptionlanguage[2]{%|\\
%   |  #1{\select@language}{\selectlanguage}{#2}}|
% \end{quote}
% If you need to alter this, just either define |\select|\-|caption|\-|lan|\-|guage| prior
% loading \thispackage, or redefine it afterwards.
%
% \pagebreak[3]
% Example document using \package{babel}:
% \begin{quote}
%   |\documentclass[a4paper]{article}|\\
%   ||\\
%   |% Use "ngerman" as 1st language, "english" as 2nd one|\\
%   |\usepackage[english,ngerman]{babel}|\\
%   ||\\
%   |% Add custom translations to babel|\\
%   |\addto\captionsgerman{%|\\
%   |% \renewcommand\whatevername{Wasauchimmer}%|\\
%   |% |\ldots\\
%   |}|\\
%   |\addto\captionsenglish{%|\\
%   |% \renewcommand\whatevername{Whatever}%|\\
%   |% |\ldots\\
%   |}|\\
%   ||\\
%   |% Load the bicaption package with 2nd language set to|\\
%   |% "english"|\\
%   |\usepackage[lang=english]{bicaption}|\\
%   ||\\
%   |\begin{document}|\\
%   ||\\
%   |\begin{figure}|\\
%   |  \centering|\\
%   |  A placeholder for an image or whatever|\\
%   |  \bicaption{Deutscher Text}{English text}|\\
%   |\end{figure}|\\
%   ||\\
%   |\end{document}|
% \end{quote}
%
% \pagebreak[3]
% The same example document but using a custom implementation of
% |\caption|\-|main|\-|language| and |\select|\-|caption|\-|language|
% instead of \package{babel}:
% \begin{quote}
%   |\documentclass[a4paper]{article}|\\
%   ||\\
%   |% Load the bicaption package with 2nd language set to|\\
%   |% "english"|\\
%   |\usepackage[lang=english]{bicaption}|\\
%   ||\\
%   |% Set "german" as main bi-caption language|\\
%   |\newcommand\captionmainlanguage{german}|\\
%   ||\\
%   |% Declare an own language switching mechanism|\\
%   |% for bi-captions (instead of using babel)|\\
%   |\renewcommand\selectcaptionlanguage[2]{%|\\
%   |  \csname captions#2\endcsname}|\\
%   |\newcommand\captionsgerman{%|\\
%   |  \renewcommand\figurename{Abbildung}%|\\
%   |  \renewcommand\tablename{Tabelle}%|\\
%   |% \renewcommand\whatevername{Wasauchimmer}%|\\
%   |% |\ldots\\
%   |}|\\
%   |\newcommand\captionsenglish{%|\\
%   |  \renewcommand\figurename{Figure}%|\\
%   |  \renewcommand\tablename{Table}%|\\
%   |% \renewcommand\whatevername{Whatever}%|\\
%   |% |\ldots\\
%   |}|\\
%   ||\\
%   |\begin{document}|\\
%   ||\\
%   |\begin{figure}|\\
%   |  \centering|\\
%   |  A placeholder for an image or whatever|\\
%   |  \bicaption{Deutscher Text}{English text}|\\
%   |\end{figure}|\\
%   ||\\
%   |\end{document}|
% \end{quote}
%
% \pagebreak[3]
% \NEWfeature{v1.5}
% Since \version{1.5} a warning is issued if the main language could neither be
% detected automatically nor was it set explicitly by the user.
% If you really don't want to set languages for bi-captions but are annoyed by
% the warning you could trick the \package{bicaption} by defining a custom
% dummy language-selection mechanism, e.g.:
% \begin{quote}
%   |\newcommand\captionmainlanguage{dummy}|\\
%   |\renewcommand\selectcaptionlanguage[2]{}|\\
% \end{quote}
%
% \medskip
%
% \DescribeMacro{\DeclareCaption-\\LangOption}
% \NEWfeature*{v1.2}
% For internal implementation reasons the selection of language will be done delayed,
% i.e.~not done immediately at |lang=|\meta{language}. So if you do
% \begin{quote}
%   |\captionsetup[bi-second]{lang=ngerman,labelsep=quad}|
% \end{quote}
% the language |ngerman| will only be stored internally, and the label separator will
% be set to |quad| afterwards. Some time later, right before the caption is actually
% typeset, the language will be set to |ngerman|.
%
% Usually this is no problem, but think of options which will be overwritten by the
% language selection, or options which act on the language currently set, for example
% \begin{quote}
%   |\captionsetup[bi-second]{lang=ngerman,name=Bild}|\quad.
% \end{quote}
% |lang=ngerman| changes the environment name to ``Abbildung'', and |name=Bild|
% changes the environment name to ``Bild''. One would expect that the name is
% finally ``Bild'', but because of the delayed nature of |lang=ngerman| it will
% be ``Abbildung'' instead, at least if we don't take action about this.
%
% For that reason the command
% \begin{quote}
%   |\DeclareCaptionLangOption|\marg{caption option name}
% \end{quote}
% is offered. Options handled this way will be applied twice if used after the |lang=|
% option, when the option is actually used, and right after the language is selected.
%
% \begin{quote}
%   |\DeclareCaptionLangOption{name}|
% \end{quote}
% will be done by \thispackage\ automatically, since the environment name will usually
% be overwritten by a language selection. So actually
% \begin{quote}
%   |\captionsetup[bi-second]{lang=ngerman,name=Bild}|
% \end{quote}
% will give the expected result, i.e. the environment name is typeset as ``Bild''.
%
% \section{Required packages}
% \label{sec:caption}
%
% \NEWfeature{v1.4}
% Starting with version $1.4$ the \package{bicaption} package requires at least version $3.2$
% of the \package{caption} package and loads it automatically.
% (Older versions of the \package{bicaption} package have required exactly the version of the
% \package{caption} package which was released with it.)
%
% \pagebreak[3]
% If you need to use a specific version of the \package{caption} package you need to load it
% \emph{before} the \package{bicaption} package, e.g.:
% \begin{quote}
%   |\usepackage[| \ldots |]{caption}[=v3.5]|\\
%   |\usepackage[| \ldots |]{bicaption}|
% \end{quote}
%
% \pagebreak[3]
% Note that there are limitations if an older version of the \package{caption} package
% is used:
% \begin{itemize}
%   \item Full support of list entries of the \env{lstlisting} environment
%         (offered by the \package{listings} package) needs at least \package{caption} \version{3.6}.
% \end{itemize}
%
% \section{Supported packages}
% \label{sec:packages}
%
% The \package{bicaption} package was adapted to the following packages which deals with captions, too:
% \package{listings}~\cite{listings}, \package{longtable}~\cite{longtable}, and \package{subcaption}~\cite{subcaption}.
%
% \subsection{Support of the listings package}
% \label{sec:listings}
%
% \NEWfeature{v1.5}
% If the \package{listings} package~\cite{listings} is loaded, the \package{listings} options \opt{caption1}
% and \opt{caption2} are available additionally, where option \opt{caption1} specifies the
% caption of the first language and \opt{caption2} of the second one.
%
% Example document, using distinctive lists for each language:
% \begin{quote}
%   |\documentclass[a4paper]{article}|\\
%   |\usepackage{graphicx}|\\
%   ||\\
%   |% Use "ngerman" as 1st language, "english" as 2nd one|\\
%   |\usepackage[english,ngerman]{babel}|\\
%   ||\\
%   |% Load the bicaption package with 2nd language set to|\\
%   |% "english", and list type "figureEng" resp. "tableEng"|\\
%   |\usepackage[lang=english,listtype+=Eng,font=it]{bicaption}|\\
%   |\captionsetup{slc=off} % do not center short captions|\\
%   ||\\
%   |\usepackage{listings}|\\
%   ||\\
%   |% Set German names|\\
%   |\addto\captionsgerman{%|\\
%   |  \renewcommand\lstlistingname{Quelltext}%|\\
%   |  \renewcommand\lstlistlistingname{Quelltextverzeichnis}%|\\
%   |}|\\
%   |\AtBeginDocument{\captionsgerman}% or load listings before babel|\\
%   ||\\
%   |% Set English names|\\
%   |\addto\captionsenglish{%|\\
%   |  \renewcommand\lstlistingname{Listing}%|\\
%   |  \renewcommand\lstlistlistingname{List of Listings}%|\\
%   |}|\\
%   ||\\
%   |\usepackage{newfloat}|\\
%   |% Define the new floating environment type "lstlistingEng"|\\
%   |% (just to get an extra list for English listing captions)|\\
%   |\DeclareFloatingEnvironment[fileext=lol2]{lstlistingEng}|\\
%   |                           [Listing][List of Listings]|\\
%   ||\\
%   |\begin{document}|\\
%   ||\\
%   |\lstlistoflistings    % German|\\
%   |\listoflstlistingEng  % English|\\
%   ||\\
%   |\clearpage|\\
%   ||\\
%   |\begin{lstlisting}|\\
%   |      [language=C,|\\
%   |       caption1=Deutscher Titel,|\\
%   |       caption2=English Title]|\\
%   |  int main()|\\
%   |  {|\\
%   |      printf( "Hello world!\n" );|\\
%   |      return 0;|\\
%   |  }|\\
%   |\end{lstlisting}|\\
%   ||\\
%   |\end{document}|
% \end{quote}
%
% \subsection{Support of the longtable package}
% \label{sec:longtable}
%
% If the \package{longtable} package~\cite{longtable} is loaded, |\bicaption| is available
% in the \env{longtable} environment as well, e.g.:
% \begin{quote}
%   |\documentclass[a4paper]{article}|\\
%   ||\\
%   |% Use "ngerman" as 1st language, "english" as 2nd one|\\
%   |\usepackage[english,ngerman]{babel}|\\
%   ||\\
%   |% Load the bicaption package with 2nd language set to|\\
%   |% "english"|\\
%   |\usepackage[lang=english]{bicaption}|\\
%   ||\\
%   |\usepackage{longtable}|\\
%   ||\\
%   |\begin{document}|\\
%   ||\\
%   |\begin{longtable}{ll}|\\
%   |  \bicaption{Deutscher Titel}{English Title}\\|\\
%   |  A & B \\|\\
%   |  C & D \\|\\
%   |  |\ldots\\
%   |\end{longtable}|\\
%   ||\\
%   |\end{document}|
% \end{quote}
%
% \subsection{Support of the subcaption package}
% \label{sec:subcaption}
%
% If the \package{subcaption} package~\cite{subcaption} is loaded, these commands are available
% additionally:
%
% \smallskip
%
% \DescribeMacro\bisubcaption
% Bilingual sub-captions will be typeset by
% \begin{quote}
%   |\bisubcaption|\oarg{list entry \#1}\marg{heading \#1}\\
%   |             |\oarg{list entry \#2}\marg{heading \#2}\\
%   |\bisubcaption*|\marg{heading \#1}\marg{heading \#2}
% \end{quote}
% The |\label| should be placed either after this command, or inside the first heading.
%
% \DescribeMacro\bisubcaptionbox
% Bilingual sub-caption boxes will be typeset by
% \begin{quote}
%   |\bisubcaptionbox|\oarg{list entry \#1}\marg{heading \#1}\\
%   |                |\oarg{list entry \#2}\marg{heading \#2}\\
%   |                |\oarg{width}\oarg{inner-pos}\marg{contents}\\
%   |\bisubcaptionbox*|\marg{heading \#1}\marg{heading \#2}\\
%   |                 |\oarg{width}\oarg{inner-pos}\marg{contents}
% \end{quote}
% The |\label| should be placed inside the first heading.
%
% \begingroup\small
% (For a description of the optional parameters \meta{width} and \meta{inner-pos}
% please take a look at the \package{subcaption} package documentation,
% \cs{subcaptionbox}.)
% \endgroup
%
% \pagebreak[3]
% \subsubsection{A sample document}
%
% \begin{quote}
%   |\documentclass[english,ngerman]{article}|\\
%   |\usepackage{selinput}|\\
%   |\SelectInputMappings{adieresis={ä},germandbls={ß}}|\\
%   ||\\
%   |\usepackage{babel}|\\
%   |\usepackage[lang=english,font=it]{bicaption}|\\
% \iffalse
%   |\usepackage[format=hang,list=on]{subcaption}|\\
% \else
%   |\usepackage[format=hang]{subcaption}|\\
% \fi
%   ||\\
%   |\begin{document}|\\
%   ||\\
% \iffalse
%   |\listoffigures|\\
%   ||\\
% \fi
%   |\begin{figure}[!htb]|\\
%   |  \centering|\\
%   |  \bisubcaptionbox|\\
%   |    {Teilabbildung A\label{fig:test:A}}|\\
%   |    {Subfigure A}[0.4\textwidth]{IMAGE}%|\\
%   |  \qquad|\\
%   |  \bisubcaptionbox|\\
%   |    {Teilabbildung langer Titel B\label{fig:test:B}}|\\
%   |    {Subfigure long title B}[0.4\textwidth]{IMAGE}%|\\
%   |  \bicaption{Deutscher Titel}{English Title}|\\
%   |  \label{fig:test}|\\
%   |\end{figure}|\\
%   ||\\
% \iffalse
%   |\captionsetup{bi-lang=2nd}|\\
%   ||\\
%   |\begin{figure}[!htb]|\\
%   |  \centering|\\
%   |  \bisubcaptionbox|\\
%   |    {Teilabbildung A\label{fig:test2:A}}|\\
%   |    {Subfigure A}[0.4\textwidth]{IMAGE}%|\\
%   |  \qquad|\\
%   |  \bisubcaptionbox|\\
%   |    {Teilabbildung langer Titel B\label{fig:test2:B}}|\\
%   |    {Subfigure long title B}[0.4\textwidth]{IMAGE}%|\\
%   |  \bicaption{Deutscher Titel}{English Title}|\\
%   |  \label{fig:test2}|\\
%   |\end{figure}|\\
%   ||\\
% \fi
%   |\captionsetup{bi-lang=both}|\\
%   ||\\
%   |\begin{figure}[!htb]|\\
%   |  \centering|\\
%   |  \bisubcaptionbox[A]|\\
%   |    {Und eine gaaaanz lange Caption: Teilabbildung A}|\\
%   |    {Subfigure A}[0.4\textwidth]{IMAGE}%|\\
%   |  \qquad|\\
%   |  \bisubcaptionbox[B]|\\
%   |    {Teilabbildung B}|\\
%   |    {Subfigure B}[0.4\textwidth]{IMAGE}%|\\
%   |  \bicaption[Abbildungsverzeichnistitel]|\\
%   |    {Und eine noch viel viel viel|\\
%   |     längere deutsche Beschriftung: Deutscher Titel}|\\
%   |    {Short English heading}|\\
%   |\end{figure}|\\
%   ||\\
%   |\captionsetup{bi-slc=off}|\\
%   ||\\
%   |\begin{figure}[!htb]|\\
%   |  \centering|\\
%   |  \bisubcaptionbox[A]|\\
%   |    {Und eine gaaaanz lange Caption: Teilabbildung A}|\\
%   |    {Subfigure A}[0.4\textwidth]{IMAGE}%|\\
%   |  \qquad|\\
%   |  \bisubcaptionbox[B]|\\
%   |    {Teilabbildung B}|\\
%   |    {Subfigure B}[0.4\textwidth]{IMAGE}%|\\
%   |  \bicaption[Abbildungsverzeichnistitel]|\\
%   |    {Und eine noch viel viel viel|\\
%   |     längere deutsche Beschriftung: Deutscher Titel}|\\
%   |    {Short English heading}|\\
%   |\end{figure}|\\
%   ||\\
%   |\captionsetup{slc=off}|\\
%   ||\\
%   |\begin{figure}[!htb]|\\
%   |  \centering|\\
%   |  \bisubcaptionbox[A]|\\
%   |    {Und eine gaaaanz lange Caption: Teilabbildung A}|\\
%   |    {Subfigure A}[0.4\textwidth]{IMAGE}%|\\
%   |  \qquad|\\
%   |  \bisubcaptionbox[B]|\\
%   |    {Teilabbildung B}|\\
%   |    {Subfigure B}[0.4\textwidth]{IMAGE}%|\\
%   |  \bicaption[Abbildungsverzeichnistitel]|\\
%   |    {Und eine noch viel viel viel|\\
%   |     längere deutsche Beschriftung: Deutscher Titel}|\\
%   |    {Short English heading}|\\
%   |\end{figure}|\\
%   ||\\
%   |\end{document}|
% \end{quote}
%
% \pagebreak[3]
% \captionsetup[bi-first]{lang=german}
% \captionsetup[bi-second]{lang=english,font=it}
% \captionsetup[sub]{format=hang,list=on}
%
% \iffalse
% \listoffigures
% \bigskip
% \fi
%
% \begin{minipage}{\linewidth}
%   \setcaptiontype{figure}
%   \centering
%   \bisubcaptionbox
%     {Teilabbildung A\label{fig:test:A}}
%     {Subfigure A}[0.4\textwidth]{IMAGE}%
%   \qquad
%   \bisubcaptionbox
%     {Teilabbildung langer Titel B\label{fig:test:B}}
%     {Subfigure long title B}[0.4\textwidth]{IMAGE}%
%   \bicaption{Deutscher Titel}{English Title}
%   \label{fig:test}
% \end{minipage}
%
% \iffalse
% \bigskip
% \captionsetup{bi-lang=2nd}
%
% \begin{minipage}{\linewidth}
%   \setcaptiontype{figure}
%   \centering
%   \bisubcaptionbox
%     {Teilabbildung A\label{fig:test2:A}}
%     {Subfigure A}[0.4\textwidth]{IMAGE}%
%   \qquad
%   \bisubcaptionbox
%     {Teilabbildung langer Titel B\label{fig:test2:B}}
%     {Subfigure long title B}[0.4\textwidth]{IMAGE}%
%   \bicaption{Deutscher Titel}{English Title}
%   \label{fig:test2}
% \end{minipage}
% \fi
%
% \bigskip
% \captionsetup{bi-lang=both}
%
% \begin{minipage}{\linewidth}
%   \setcaptiontype{figure}
%   \centering
%   \bisubcaptionbox[A]
%     {Und eine gaaaanz lange Caption: Teilabbildung A}
%     {Subfigure A}[0.4\textwidth]{IMAGE}%
%   \qquad
%   \bisubcaptionbox[B]
%     {Teilabbildung B}
%     {Subfigure B}[0.4\textwidth]{IMAGE}%
%   \bicaption[Abbildungsverzeichnistitel]
%     {Und eine noch viel viel viel
%      längere deutsche Beschriftung: Deutscher Titel}
%     {Short English heading}
% \end{minipage}
%
% \bigskip
% \captionsetup{bi-slc=off}
%
% \begin{minipage}{\linewidth}
%   \setcaptiontype{figure}
%   \centering
%   \bisubcaptionbox[A]
%     {Und eine gaaaanz lange Caption: Teilabbildung A}
%     {Subfigure A}[0.4\textwidth]{IMAGE}%
%   \qquad
%   \bisubcaptionbox[B]
%     {Teilabbildung B}
%     {Subfigure B}[0.4\textwidth]{IMAGE}%
%   \bicaption[Abbildungsverzeichnistitel]
%     {Und eine noch viel viel viel
%      längere deutsche Beschriftung: Deutscher Titel}
%     {Short English heading}
% \end{minipage}
%
% \bigskip
% \captionsetup{slc=off}
%
% \begin{minipage}{\linewidth}
%   \setcaptiontype{figure}
%   \centering
%   \bisubcaptionbox[A]
%     {Und eine gaaaanz lange Caption: Teilabbildung A}
%     {Subfigure A}[0.4\textwidth]{IMAGE}%
%   \qquad
%   \bisubcaptionbox[B]
%     {Teilabbildung B}
%     {Subfigure B}[0.4\textwidth]{IMAGE}%
%   \bicaption[Abbildungsverzeichnistitel]
%     {Und eine noch viel viel viel
%      längere deutsche Beschriftung: Deutscher Titel}
%     {Short English heading}
% \end{minipage}
%
% \iffalse
% --------------------------------------------------------------------------- %
% \fi
%
% \StopEventually{%^^A
% \begin{thebibliography}{99}
%
%   \bibitem{caption}
%   Axel Sommerfeldt:\\
%   \href{http://www.ctan.org/pkg/caption}%
%        {\emph{Customizing captions of floating environments}},\\
%   2022/01/07
%
%   \bibitem{listings}
%   Carsten Heinz \& Brooks Moses:\\
%   \href{http://www.ctan.org/pkg/listings}%
%        {\emph{The Listings Package}},\\
%   2007/02/22
%
%   \bibitem{longtable}
%   David Carlisle:\\
%   \href{http://www.ctan.org/pkg/longtable}%
%        {\emph{The longtable package}},\\
%   2004/02/01
%
%   \bibitem{subcaption}
%   Axel Sommerfeldt:\\
%   \href{http://www.ctan.org/pkg/subcaption}%
%        {\emph{The subcaption package}},\\
%   2022/01/07
%
% \end{thebibliography}
% }
%
% \iffalse
% --------------------------------------------------------------------------- %
% \fi
%
% \DoNotIndex{\\,\_,\ ,\@@par}
% \DoNotIndex{\@bsphack}
% \DoNotIndex{\@car,\@cdr,\@classoptionslist,\@cons,\@currext,\@currname}
% \DoNotIndex{\@ehc,\@ehd,\@empty,\@esphack,\@expandtwoargs}
% \DoNotIndex{\@for,\@firstofone,\@firstoftwo}
% \DoNotIndex{\@gobble,\@gobblefour,\@gobbletwo,\@hangfrom}
% \DoNotIndex{\if@minipage,\@ifnextchar,\@ifpackagelater,\@ifpackageloaded}
% \DoNotIndex{\@ifstar,\@ifundefined,\@latex@error,\@namedef,\@nameuse}
% \DoNotIndex{\@onlypreamble,\@parboxrestore,\@plus,\@ptionlist}
% \DoNotIndex{\@removeelement,\@restorepar,\@secondoftwo,\@setpar}
% \DoNotIndex{\@tempa,\@tempboxa,\@tempdima,\@tempdimb,\@tempdimc,\@tempb,\@tempc}
% \DoNotIndex{\@testopt}
% \DoNotIndex{\@undefined,\@unprocessedoptions,\@unusedoptionlist}
% \DoNotIndex{\p@,\z@}
% \DoNotIndex{\active,\addtocounter,\addtolength,\advance,\aftergroup}
% \DoNotIndex{\baselineskip,\begin,\begingroup,\bfseries,\box}
% \DoNotIndex{\catcode,\centering,\changes,\csname,\def,\divide,\do,\downarrow}
% \DoNotIndex{\edef,\else,\empty,\end,\endcsname,\endgraf,\endgroup,\expandafter}
% \DoNotIndex{\fi,\footnotesize,\global}
% \DoNotIndex{\hangindent,\hbox,\hfil,\hsize,\hskip,\hspace,\hss}
% \DoNotIndex{\ifcase,\ifdim,\ifnum,\ifodd,\ifvoid,\ifvmode}
% \DoNotIndex{\ifx,\ignorespaces,\itshape}
% \DoNotIndex{\kernel@ifnextchar}
% \DoNotIndex{\Large,\large,\leavevmode,\leftmargini,\leftskip,\let,\linewidth}
% \DoNotIndex{\llap,\long,\m@ne,\margin,\mdseries,\message}
% \DoNotIndex{\newcommand,\newdimen,\newlength,\newline,\newif,\newsavebox}
% \DoNotIndex{\next,\nobreak,\nobreakspace,\noexpand,\noindent,\numberline}
% \DoNotIndex{\normalcolor,\normalfont,\normalsize,\or,\par,\parbox,\parfillskip}
% \DoNotIndex{\parindent,\parskip,\prevdepth,\protect,\protected@edef,\protected@write}
% \DoNotIndex{\providecommand,\quad}
% \DoNotIndex{\raggedleft,\raggedright,\relax,\renewcommand,\RequirePackage}
% \DoNotIndex{\rightskip,\rmfamily}
% \DoNotIndex{\sbox,\scriptsize,\scshape,\setbox,\setlength,\sffamily,\slshape}
% \DoNotIndex{\small,\string,\space,\strut}
% \DoNotIndex{\textheight,\the,\toks@,\typeout,\ttfamily}
% \DoNotIndex{\unvbox,\uparrow,\upshape,\usebox,\usepackage}
% \DoNotIndex{\value,\vbox,\vsize,\vskip,\wd,\width,\z@skip}
% \DoNotIndex{\AtBeginDocument,\AtEndOfPackage,\CurrentOption,\DeclareOption}
% \DoNotIndex{\ExecuteOptions,\GenericWarning,\IfFileExists,\InputIfFileExists}
% \DoNotIndex{\NeedsTeXFormat,\MessageBreak}
% \DoNotIndex{\PackageError,\PackageInfo,\PackageWarning,\PackageWarningNoLine}
% \DoNotIndex{\PassOptionsToPackage,\ProcessOptions,\ProvidesPackage}
%
% \iffalse
% --------------------------------------------------------------------------- %
% \fi
%
% \setlength{\parskip}{0pt plus 1pt}
% \changes{v0.1}{2010/07/13}{Initial version}
% \changes{v0.2}{2010/07/13}{Check for caption package added}
% \changes{v0.3}{2010/07/13}{Usage of \cs{caption@applyfont} added}
% \changes{v0.4}{2010/07/13}{``Singlelinecheck'' fixed}
% \changes{v0.5}{2010/07/13}{Options \opt{bi-first} and \opt{bi-second} added}
% \changes{v0.6}{2010/07/13}{Option \opt{bi-slc} added}
% \changes{v0.7}{2010/07/13}{Option \opt{bi-lang} added}
% \changes{v0.8}{2010/09/04}{Adapted to current version of the caption kernel}
% \changes{v0.9}{2010/09/17}{Option \opt{bi-swap} added}
% \changes{v0.9a}{2011/07/13}{Warning regarding \package{babel} package added}
%
% \newcommand*\Note[2][Note]{\par{\small\emph{#1:} #2}}
%
% \iffalse
% --------------------------------------------------------------------------- %
% \fi
%
% \clearpage
% \section{The implementation}
%
% \iffalse
%<*package>
% \fi
%
% \subsection{Identification}
%
% We need at least \LaTeX2e\ version 1994/12/01.
%    \begin{macrocode}
\NeedsTeXFormat{LaTeX2e}[1994/12/01]
%    \end{macrocode}
%
% Bypass the release declarations in case the \LaTeX\ kernel doesn’t know how to deal with them
% (as suggested by \url{https://www.latex-project.org/publications/2018-FMi-TUB-tb122mitt-version-rollback.pdf}).
%    \begin{macrocode}
\providecommand\DeclareRelease[3]{}
\providecommand\DeclareCurrentRelease[2]{}
%    \end{macrocode}
%
% Declare all supported releases.
%    \begin{macrocode}
\DeclareCurrentRelease{v1}{2011/07/13}
%    \end{macrocode}
%
% Identify the current version of the package.
%    \begin{macrocode}
\ProvidesPackage{bicaption}[2021/05/02 v1.5b Bilingual Captions (AR)]
%    \end{macrocode}
%
% Since we base on the \package{caption} package we load it here.
%    \begin{macrocode}
\RequirePackage{caption}[2011/11/10] % we need at least v3.2e
%    \end{macrocode}
%
% \bigskip
%
% \pagebreak[3]
% \subsection{Initial code}
%
% \begin{macro}{\bicaption@Info}
%  |\bicaption@Info|\marg{message}
%    \begin{macrocode}
\newcommand*\bicaption@Info[1]{%
  \PackageInfo{bicaption}{#1}}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\bicaption@InfoNoLine}
%  |\bicaption@InfoNoLine|\marg{message}\par
%  \Note{The \cs{@gobble} at the end of the 2nd argument of
%   \cs{PackageInfo} suppresses the line number info.
%   See TLC2\cite{TLC2}, A.4.7, p885 for details.}
%    \begin{macrocode}
\newcommand*\bicaption@InfoNoLine[1]{%
  \PackageInfo{bicaption}{#1\@gobble}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\bicaption@Warning}
%  |\bicaption@Warning|\marg{message}
%    \begin{macrocode}
\newcommand*\bicaption@Warning[1]{%
  \bicaption@WarningNoLine{#1\on@line}}
%    \end{macrocode}
% \end{macro}
% \begin{macro}{\bicaption@WarningNoLine}
%  |\bicaption@WarningNoLine|\marg{message}
%    \begin{macrocode}
\newcommand*\bicaption@WarningNoLine[1]{%
  \PackageWarning{bicaption}{#1.^^J\bicaption@wh\@gobbletwo}}
%    \end{macrocode}
%    \begin{macrocode}
\newcommand*\bicaption@wh{%
  See the `bicaption' package documentation for explanation.}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\bicaption@Error}
%  |\bicaption@Error|\marg{message}
%    \begin{macrocode}
\newcommand*\bicaption@Error[1]{%
  \PackageError{bicaption}{#1}{\caption@@eh{bicaption}}}
%    \end{macrocode}
%    \begin{macrocode}
\providecommand*\caption@@eh[1]{%
  If you do not understand this error, please take a closer look\MessageBreak
  at the documentation of the `#1' package, especially the\MessageBreak
  section about errors.\MessageBreak\@ehc}
%    \end{macrocode}
% \end{macro}
%
% \pagebreak[3]
% \subsection{Declaration of options}
%
% The option |bi-lang| will setup which language(s) will actually be typeset,
% the first one, the second one, or both of them.
%    \begin{macrocode}
\newcount\bicaption@lang
\DeclareCaptionOption{bi-lang}{%
  \caption@ifinlist{#1}{0,all,both}{%
    \bicaption@lang=0\relax
  }{\caption@ifinlist{#1}{1,1st,first}{%
    \bicaption@lang=1\relax
  }{\caption@ifinlist{#1}{2,2nd,second}{%
    \bicaption@lang=2\relax
  }{%
    \bicaption@Error{Undefined bi-lang value `#1'}%
  }}}}
%    \end{macrocode}
%
% The option |bi-singlelinecheck| will setup if a single check will be used
% for both languages (|=on|),
% or if both languages will be checked individually (|=off|).
%    \begin{macrocode}
\DeclareCaptionOption{bi-singlelinecheck}[1]{%
  \caption@set@bool\bicaption@ifslc{#1}}
\DeclareCaptionOption{bi-slc}[1]{%
  \caption@set@bool\bicaption@ifslc{#1}}
%    \end{macrocode}
%
% The option |bi-swap| will swap the primary and secondary language,
% making the first language the second one and vice versa.
%    \begin{macrocode}
\DeclareCaptionOption{bi-swap}[1]{%
  \caption@set@bool\bicaption@ifswap{#1}}
%    \end{macrocode}
%
% The option |bi-separator| will setup the separator between
% the two bi-lingual captions.
%    \begin{macrocode}
\DeclareCaptionOption{bi-separator}[1]{%
  \caption@set{biseparator}{#1}}
%    \end{macrocode}
%    \begin{macrocode}
\providecommand*\caption@set[2]{%
  \@ifundefined{caption@#1@#2}%
    {\caption@Error{Undefined #1 `#2'}}%
    {\expandafter\let\csname caption@#1\expandafter\endcsname\csname caption@#1@#2\endcsname}}
%    \end{macrocode}
%
% \begin{macro}{\DeclareBiCaptionSeparator}
% \changes{v1.3}{2020/10/25}{This macro added}
%   |\DeclareBiCaptionSeparator|\marg{name}\marg{code}
%    \begin{macrocode}
\newcommand\DeclareBiCaptionSeparator[2]{%
  \caption@decl{biseparator}{#1}{#2}}
\@onlypreamble\DeclareBiCaptionSeparator
%    \end{macrocode}
%    \begin{macrocode}
\providecommand*\caption@decl[2]{%
  \global\long\expandafter\def\csname caption@#1@#2\endcsname}
%    \end{macrocode}
% \end{macro}
%
% There are four pre-defined separators, called `none',
% `smallskip', `medskip', and `bigskip'.
%    \begin{macrocode}
\DeclareBiCaptionSeparator{none}{}
\DeclareBiCaptionSeparator{smallskip}{\smallskip}
\DeclareBiCaptionSeparator{medskip}{\medskip}
\DeclareBiCaptionSeparator{bigskip}{\bigskip}
%    \end{macrocode}
%
% The default separator usually maps to `none'.
%    \begin{macrocode}
\caption@ifundefined\SetCaptionDefault
  {\def\caption@biseparator@default{\caption@biseparator@none}}
  {\SetCaptionDefault{biseparator}{none}}
%    \end{macrocode}
%
% The option |lang=|\meta{language} will setup the language of the caption.
% We can't set the language immediately because otherwise we will get in trouble, e.g. when
% using the \package{microtype} package via |\usepackage[babel]{microtype}|.
% So we store the selected language to |\bicaption@language| instead and will set it later on.
% But this has a drawback, option settings which will be overwritten by the selection of
% the language do not work correctly anymore. Therefore we will save specific options
% and set them (again) after setting the language.
%    \begin{macrocode}
\DeclareCaptionOption{lang}{%
  \caption@ifundefined\bicaption@language
    \bicaption@language@setupkeys
    \relax
  \edef\bicaption@language{#1}%
  \let\bicaption@language@setoptions\@empty
  \global\let\bicaption@language@value\bicaption@language}
%    \end{macrocode}
% Map |language=| to |lang=|.
%    \begin{macrocode}
\let\KV@caption@language\KV@caption@lang
%    \end{macrocode}
%
% \begin{macro}{\DeclareCaptionLangOption}
% \changes{v1.2}{2016/03/27}{This macro added}
% |\DeclareCaptionLangOption|\marg{option key}\par
% Saves the gives \meta{option key} to the list |\bicaption@language@keylist|.
% These options will be stored and set (again) after setting the language.
%    \begin{macrocode}
\newcommand*\bicaption@language@keylist{}
%    \end{macrocode}
%    \begin{macrocode}
\newcommand*\DeclareCaptionLangOption[1]{%
  \@ifundefined{KV@caption@#1}%
    {\bicaption@Error{Undefined caption option `#1'}}%
    {\@cons\bicaption@language@keylist{{#1}}}}
%    \end{macrocode}
%    \begin{macrocode}
\let\DeclareCaptionLanguageOption\DeclareCaptionLangOption
%    \end{macrocode}
%    \begin{macrocode}
\newcommand*\bicaption@language@setupkeys{%
  \def\@elt##1{%
    \expandafter\let\csname KV@bicaption@##1\expandafter\endcsname
                    \csname KV@caption@##1\endcsname
    \@namedef{KV@caption@##1}{\bicaption@KV{##1}}}%
  \bicaption@language@keylist
  \let\@elt\relax}
%    \end{macrocode}
%    \begin{macrocode}
\newcommand\bicaption@KV[2]{%
  \@bicaption@KV{#1}{#2}%
  \l@addto@macro\bicaption@language@setoptions{%
    \@bicaption@KV{#1}{#2}}}
%    \end{macrocode}
%    \begin{macrocode}
\newcommand\@bicaption@KV[1]{%
  \@nameuse{KV@bicaption@#1}}
%    \end{macrocode}
% \end{macro}
%
% The only option affected I'm aware off is the |name=| option, so this will be saved
% and set later on.
%    \begin{macrocode}
\DeclareCaptionLangOption{name}
%    \end{macrocode}
%
% \begin{macro}{\bicaption@selectlanguage}
% \changes{v1.0}{2011/08/31}{Starred variant added}
% \changes{v1.1}{2012/04/09}{Support of \cs{selectcaptionlanguage} added}
% \changes{v1.1}{2016/03/25}{Patching of \cs{caption@applyfont} replaced by \cs{caption@beginhook}}
% \changes{v1.1}{2016/03/27}{Usage of \cs{bicaption@language@setoptions} added}
% |\bicaption@selectlanguage|\marg{font-or-list-entry}\par
% Set the language (stored in |\bi|\-|caption@lan|\-|guage|)
% via |\select|\-|bi|\-|caption|\-|lan|\-|guage|.
%    \begin{macrocode}
\newcommand*\bicaption@selectlanguage[1]{%
  \caption@ifundefined\bicaption@language{}{%
    \expandafter\selectcaptionlanguage\expandafter#1\expandafter
      {\bicaption@language}%
    \bicaption@language@setoptions}}
%    \end{macrocode}
% |\caption@beginhook| (of the \package{caption} package kernel) will be extended here
% so the language setting will actually take effect.
%    \begin{macrocode}
\g@addto@macro\caption@beginhook{%
  \bicaption@selectlanguage\@firstoftwo}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\selectcaptionlanguage}
% |\selectcaptionlanguage|\marg{font-or-list-entry}\marg{language}
% will finally be used to set up the language.
%    \begin{macrocode}
\providecommand*\selectcaptionlanguage[1]{%
  #1\select@language\selectlanguage}
%    \end{macrocode}
% \end{macro}
%
% \pagebreak[3]
% \subsection{Execution of options}
%
% Setup default values for |bi-lang|, |bi-single|\-|line|\-|check|,
% |bi-swap|, and |bi-separator|.
%    \begin{macrocode}
\caption@ExecuteOptions{caption}{bi-lang=0,bi-slc=1,bi-swap=0,bi-separator=default}
%    \end{macrocode}
%
% Set the language for the first caption.
% (Since \version{1.5a} we do this |\At|\-|Begin|\-|Document| so
% |\caption|\-|main|\-|language| could be defined \emph{after} loading the
% \package{bicaption} package resp.~\package{babel} or \package{polyglossia}
% could be loaded \emph{after} the \package{bicaption} package.)
%    \begin{macrocode}
\AtBeginDocument{%
  \ifcsname captionmainlanguage\endcsname
    \bicaption@InfoNoLine{%
      Main language is set to \captionmainlanguage}%
  \else
    \bicaption@setmainlanguage
  \fi
%    \end{macrocode}
%    \begin{macrocode}
  \ifcsname captionmainlanguage\endcsname
    \captionsetup[bi-first]{lang=\captionmainlanguage}%
  \else
    \ifcsname bicaption@language@value\endcsname % option "lang=" was used
      \expandafter\bicaption@Warning
    \else
      \expandafter\bicaption@Info
    \fi
      {Main language is not set}%
  \fi}
%    \end{macrocode}
%
% \begin{macro}{\bicaption@setmainlanguage}
% \changes{v1.5a}{2011/08/31}{This macro added as encapsulation of setting \cs{captionmainlanguage}}
% |\bicaption@setmainlanguage| is used to define
% |\caption|\-|main|\-|language| if not already done.
%    \begin{macrocode}
\newcommand*\bicaption@setmainlanguage{%
  \ifcsname bbl@main@language\endcsname
    \bicaption@InfoNoLine{%
      babel found, main language is \bbl@main@language}%
    \let\captionmainlanguage\bbl@main@language
  \else\ifcsname xpg@main@language\endcsname
    \bicaption@InfoNoLine{%
      polyglossia found, main language is \xpg@main@language}%
    \let\captionmainlanguage\xpg@main@language
  \fi\fi}
\@onlypreamble\bicaption@setmainlanguage
%    \end{macrocode}
% \end{macro}
%
% We use |\caption@Process|\-|Options| here to add the options to the `|bi-second|' option
% list instead of executing them immediately.
%    \begin{macrocode}
\caption@SetupOptions{bicaption}{\captionsetup[bi-second]{#2}}%
\caption@ProcessOptions*{bicaption}
%    \end{macrocode}
%
% \pagebreak[3]
% \subsection{Main code}
%
% \begin{macro}{\caption@addcontentsline}
% \changes{v1.0}{2011/08/31}{Redefinition of \cs{caption@kernel@addcontentsline} added}
% \changes{v1.0b}{2012/01/15}{\cs{caption@kernel@addcontentsline} changed to \cs{caption@addcontentsline}}
% \changes{v1.1}{2016/02/01}{Adaption to \package{longtable} package added}
% We patch |\caption@add|\-|contents|\-|line| (of the \package{caption} package kernel)
% so |bi|\-|caption@add|\-|contents|\-|line| will be used for bilingual captions instead.
%    \begin{macrocode}
\let\bicaption@addcontentsline@ORI\caption@addcontentsline
\renewcommand*\caption@addcontentsline[2]{%
%    \end{macrocode}
%    \begin{macrocode}
  \bicaption@LT@setup
  \global\let\bicaption@LT@setup\relax
%    \end{macrocode}
%    \begin{macrocode}
  \caption@ifundefined\bicaption@lentry
    {\bicaption@addcontentsline@ORI{#1}{#2}}%
    {\expandafter\bicaption@addcontentsline\expandafter
       {\bicaption@lentry}{#1}{#2}%
     \global\let\bicaption@lentry\@undefined}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\bicaption@addcontentsline}
% \changes{v1.0}{2011/08/31}{This macro added}
% \changes{v1.1}{2013/03/10}{Bugfix: Delayed usage of \cs{caption@addsubcontentslines} added}
% |\bicaption@addcontentsline|\marg{list entry \#2}\marg{type}\marg{list entry \#1}\par
% Typeset both captions using the original version of |\caption@add|\-|contents|\-|line|.
%    \begin{macrocode}
\newcommand\bicaption@addcontentsline[3]{%
  \begingroup
    \let\caption@addsubcontentslines\@gobble
%    \end{macrocode}
% Execute the options setup with |\captionsetup[bi]{|\ldots|}|.
%    \begin{macrocode}
    \caption@setoptions{bi}%
%    \end{macrocode}
% Do the first list entry, if requested.
%    \begin{macrocode}
    \ifnum\bicaption@lang=2\relax \else
      \begingroup
        \caption@setoptions{bi-first}%
        \bicaption@@addcontentsline{#2}{#3}%
      \endgroup
    \fi
%    \end{macrocode}
% Do the second list entry, if requested.
%    \begin{macrocode}
    \ifnum\bicaption@lang=1\relax \else
      \begingroup
        \caption@setoptions{bi-second}%
        \bicaption@@addcontentsline{#2}{#1}%
      \endgroup
    \fi
%    \end{macrocode}
%    \begin{macrocode}
  \endgroup
  \caption@addsubcontentslines{#2}}
%    \end{macrocode}
%    \begin{macrocode}
\newcommand*\bicaption@@addcontentsline[2]{%
  \caption@ifcontentsline{#2}{%
    \bicaption@selectlanguage\@secondoftwo
    \bicaption@addcontentsline@ORI{#1}{#2}}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\caption@@make}
% \changes{v1.4}{2020/12/25}{Fallback code of \cs{caption@@make@} added}
% We redefine |\caption@@make| (of the \package{caption} package kernel)
% so |\bi|\-|caption@@make| will be used for bilingual captions instead.
%    \begin{macrocode}
\caption@ifundefined\caption@@make@
  {\let\caption@@make@\caption@@make}
  {}
%    \end{macrocode}
%    \begin{macrocode}
\renewcommand\caption@@make[2]{%
  \caption@ifundefined\bicaption@text
    {\begingroup
       \caption@@make@{#1}{#2}%
     \endgroup}%
    {\expandafter\bicaption@@make\expandafter
       {\bicaption@text}{#1}{#2}%
     \global\let\bicaption@text\@undefined}%
%    \end{macrocode}
%    \begin{macrocode}
  \@nameuse{caption@@make@epilogue}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\bicaption@@make}
% \changes{v1.1}{2015/09/16}{\cs{bicaption@label} replaced by \cs{caption@thelabel}}
% \changes{v1.3}{2020/10/25}{Usage of \cs{caption@biseparator} added}
% \changes{v1.4}{2020/12/25}{Definitions of \cs{bicaption@slc} and \cs{caption@setsinglelinecheck} added (fallback)}
% \changes{v1.4a}{2020/12/26}{Clearance of \cs{caption@thelabel} replaced by \cs{bicaption@clrlabel}}
% |\bicaption@@make|\marg{text \#2}\marg{label}\marg{text \#1}\par
% Typeset both captions using the original version of \cs{caption@@make}.
%    \begin{macrocode}
\newcommand\bicaption@@make[3]{%
%    \end{macrocode}
% Execute the options setup with |\captionsetup[bi]{|\ldots|}|.
%    \begin{macrocode}
  \caption@setoptions{bi}%
%    \end{macrocode}
% Perform the common single-line-check for both captions, if requested.
%    \begin{macrocode}
  \ifnum\bicaption@lang=0\relax
    \bicaption@ifslc
      {\bicaption@slc{#2}{#3}{}{\caption@setsinglelinecheck0}%
       \bicaption@slc{#2}{#1}{}{\caption@setsinglelinecheck0}}%
      {}%
  \fi
%    \end{macrocode}
% Typeset the first caption, if requested.
% (Otherwise we only apply the label of it.)
%    \begin{macrocode}
  \ifnum\bicaption@lang=2\relax
    \caption@thelabel
    \let\bicaption@tempa\relax
  \else
    \begingroup
      \caption@setoptions{bi-first}%
      \caption@@make@{#2}{#3}%
    \endgroup
    \def\bicaption@tempa{\bicaption@separator\caption@biseparator}%
  \fi
%    \end{macrocode}
% Typeset the second caption, if requested.
%    \begin{macrocode}
  \ifnum\bicaption@lang=1\relax
  \else
    \bicaption@tempa
    \begingroup
      \caption@setoptions{bi-second}%
      \caption@@make@{#2}{#1}%
    \endgroup
  \fi
%    \end{macrocode}
%    \begin{macrocode}
  \global\bicaption@clrlabel}
%    \end{macrocode}
%    \begin{macrocode}
\newcommand*\bicaption@separator{\par}
%    \end{macrocode}
%    \begin{macrocode}
\caption@ifundefined\caption@@slc
  {\newcommand\bicaption@slc{\caption@slc}}
  {\newcommand\bicaption@slc[2]{\caption@@slc{#1}{#2}{\captionwidth}}}
%    \end{macrocode}
%    \begin{macrocode}
\providecommand*\caption@setsinglelinecheck{%
  \caption@set@bool\caption@ifslc}
%    \end{macrocode}
% \end{macro}
%
% \pagebreak[3]
% \subsubsection{The \cs{bicaption} commands}
%
% \begin{macro}{\bicaption}
% |\bicaption*|\oarg{list entry \#1}\marg{text \#1}\oarg{list entry \#2}\marg{text \#2}
%    \begin{macrocode}
\newcommand\bicaption{\@bicaption\caption}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\bicaptionbox}
% \changes{v1.0}{2011/08/31}{This macro added}
% |\bicaptionbox*|\oarg{entry \#1}\marg{text \#1}\oarg{entry \#2}\marg{text \#2}%
%                    \oarg{\ldots}\marg{\ldots}
%    \begin{macrocode}
\newcommand\bicaptionbox{\@bicaption\captionbox}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\bisubcaption}
% |\bisubcaption*|\oarg{list entry \#1}\marg{text \#1}\oarg{list entry \#2}\marg{text \#2}
%    \begin{macrocode}
\newcommand\bisubcaption{\@bicaption\subcaption}
\let\subbicaption\bisubcaption
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\bisubcaptionbox}
% |\bisubcaptionbox*|\oarg{entry \#1}\marg{text \#1}\oarg{entry \#2}\marg{text \#2}%
%                    \oarg{\ldots}\marg{\ldots}
%    \begin{macrocode}
\newcommand\bisubcaptionbox{\@bicaption\subcaptionbox}
\let\subbicaptionbox\bisubcaptionbox
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\@bicaption}
% \changes{v1.0}{2011/08/31}{Optional parameter \meta{list entry \#2} added}
% \changes{v1.1}{2015/09/16}{\cs{bicaption@getlabel} replaced by \cs{caption@getlabel}}
% \changes{v1.4}{2020/12/25}{Usage of \cs{caption@getlabel} replaced by \cs{bicaption@getlabel}}
% |\@bicaption|\marg{cmd}*\oarg{entry \#1}\marg{text \#1}\oarg{entry \#2}\marg{text \#2}\ldots
%    \begin{macrocode}
\newcommand*\@bicaption[1]{%
  \@ifstar
    {\def\bicaption@cmd{\bicaption@star{#1}}%
     \@@bicaption}%
    {\def\bicaption@cmd{#1}%
     \caption@dblarg\@@@bicaption}}
%    \end{macrocode}
%    \begin{macrocode}
\newcommand\@@bicaption[1]{%
  \@@@@bicaption{}{#1}[]}
%    \end{macrocode}
%    \begin{macrocode}
\long\def\@@@bicaption[#1]#2{%
  \caption@dblarg{\@@@@bicaption{#1}{#2}}}
%    \end{macrocode}
%    \begin{macrocode}
\long\def\@@@@bicaption#1#2[#3]#4{%
  \bicaption@getlabel{#2}%
  \bicaption@ifswap
    {\bicaption@setup{#1}{#2}%
     \bicaption@cmd[{#3}]{#4}}%
    {\bicaption@setup{#3}{#4}%
     \bicaption@cmd[{#1}]{#2}}}
%    \end{macrocode}
%    \begin{macrocode}
\long\def\bicaption@star#1[#2]{#1*}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\bicaption@getlabel}
% \changes{v1.0}{2011/09/03}{\cs{label} can have optional arguments now}
% \changes{v1.4}{2020/12/25}{This macro re-added}
%   |\bicaption@getlabel|\marg{text}\\
%   gets the label command out of the given caption text and stores it to |\caption@the|\-|label|.
%   It uses |\caption@get|\-|label| for this purpose which interface unfortunately has changed over time.
%   (Changing the interface was a bad idea in the first place but now it is as it is).
%    \begin{macrocode}
\@ifundefined{caption@getlabel}{%
%    \end{macrocode}
%    \begin{macrocode}
  \newcommand\bicaption@getlabel[1]{%  caption3 < v1.7
    \bicaption@@getlabel#1\label{}\@nil}
%    \end{macrocode}
%    \begin{macrocode}
  \long\def\bicaption@@getlabel#1\label#2#3\@nil{%
    \def\@tempa{#2}%
    \ifx\@tempa\@empty
      \let\caption@thelabel\relax
    \else
      \def\@tempb{*}%
      \ifx\@tempa\@tempb
        \def\caption@thelabel{\label*}%
        \bicaption@@@getlabel#3\@nil
      \else
        \def\caption@thelabel{\label}%
        \bicaption@@@getlabel{#2}#3\@nil
      \fi
    \fi}
%    \end{macrocode}
%    \begin{macrocode}
  \long\def\bicaption@@@getlabel#1#2\@nil{%
    \def\@tempa{#1}%
    \def\@tempb{[}%
    \ifx\@tempa\@tempb
      \bicaption@@@@getlabel#1#2\@nil
    \else
      \l@addto@macro\caption@thelabel{{#1}}%
    \fi}
%    \end{macrocode}
%    \begin{macrocode}
  \long\def\bicaption@@@@getlabel[#1]#2\@nil{%
    \l@addto@macro\caption@thelabel{[{#1}]}%
    \bicaption@@@getlabel#2\@nil}
%    \end{macrocode}
%    \begin{macrocode}
}{\@ifundefined{caption@@@@getlabel}{%
%    \end{macrocode}
%    \begin{macrocode}
  \newcommand\bicaption@getlabel[1]{%  caption3 >= v1.7
    \caption@getlabel#1\label{}\@nil}
%    \end{macrocode}
%    \begin{macrocode}
}{%
%    \end{macrocode}
%    \begin{macrocode}
  \newcommand*\bicaption@getlabel{%    caption3 >= v2.0
    \caption@getlabel}
%    \end{macrocode}
%    \begin{macrocode}
}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\bicaption@clrlabel}
% \changes{v1.4a}{2020/12/26}{This macro added}
%   |\bicaption@clrlabel|\\
%   resets |\caption@the|\-|label| to |\relax|.
%    \begin{macrocode}
\@ifundefined{caption@clrlabel}{%
%    \end{macrocode}
%    \begin{macrocode}
  \newcommand*\bicaption@clrlabel{\let\caption@thelabel\relax} %  caption3 < v2.3
%    \end{macrocode}
%    \begin{macrocode}
}{%
%    \end{macrocode}
%    \begin{macrocode}
  \newcommand*\bicaption@clrlabel{\caption@clrlabel}           %  caption3 >= v2.3
%    \end{macrocode}
%    \begin{macrocode}
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\bicaption@setup}
% |\bicaption@setup|\marg{list-entry}\marg{text}\\
% initiates the bilingual caption typesetting by storing the extra texts into
% |\bi|\-|caption@l|\-|entry| and |\bi|\-|caption@text|.
%    \begin{macrocode}
\newcommand\bicaption@setup[2]{%
  \def\bicaption@lentry{#1}%
  \def\bicaption@text{\ignorespaces #2}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\bicaption@clear}
% |\bicaption@clear|\\
% clears the stuff stored by |\bicaption@setup|.
%    \begin{macrocode}
\newcommand*\bicaption@clear{%
  \let\bicaption@lentry\@undefined
  \let\bicaption@text\@undefined}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\caption@freeze}
% \changes{v1.0}{2011/08/31}{Redefinition of \cs{caption@freeze} added}
% To make |\bicaption| work inside |SCfigure| and |FPfigure| environments we need to add
% |\bi|\-|caption| to |\caption@freeze|.
%    \begin{macrocode}
\AtBeginDocument{%
  \ifx\caption@freeze\@undefined \else
    \g@addto@macro\caption@freeze{%
      \let\caption@frozen@bicaption\bicaption
      \def\bicaption{%
        \caption@withoptargs\caption@SC@bicaption}%
      \long\def\caption@SC@bicaption#1#2{%
        \@ifnextchar[%]
          {\caption@SC@bi@caption{#1}{#2}}%
          {\caption@SC@bi@caption@{#1}{#2}}}%
      \long\def\caption@SC@bi@caption#1#2[#3]#4{%
        \caption@@freeze{\bicaption#1{#2}[{#3}]{#4}}%
        \ignorespaces}%
      \long\def\caption@SC@bi@caption@#1#2#3{%
        \caption@@freeze{\bicaption#1{#2}{#3}}%
        \ignorespaces}%
      \l@addto@macro\caption@warmup{%
        \let\bicaption\caption@frozen@bicaption}}%
  \fi}
%    \end{macrocode}
% \end{macro}
%
% \changes{v1.1}{2013/05/02}{Definition of \cs{bicaption@listof} removed}
%
% \subsection{Support of the listings package}
% \changes{v1.5}{2021/01/04}{Support of the \package{listings} package added}
%
%    \begin{macrocode}
\caption@IfPackageLoaded{listings}[2004/02/13 v1.2]{%
%    \end{macrocode}
%
% If the \package{listings} package is loaded, we define the new options `caption1' and `caption2'.
%    \begin{macrocode}
  \lst@Key{caption1}\relax{%
    \lstKV@OptArg[{#1}]{#1}{%
      \bicaption@ifswap
        {\bicaption@setup{##1}{##2}}%
        {\def\lst@@caption{##1}\def\lst@caption{##2}}}%
    \let\lst@title\@empty}%
%    \end{macrocode}
%    \begin{macrocode}
  \lst@Key{caption2}\relax{%
    \lstKV@OptArg[{#1}]{#1}{%
      \bicaption@ifswap
        {\def\lst@@caption{##1}\def\lst@caption{##2}}%
        {\bicaption@setup{##1}{##2}}}%
    \let\lst@title\@empty}%
%    \end{macrocode}
%    \begin{macrocode}
  \lst@AddToHookExe{TextStyle}{%
    \bicaption@clear}%
%    \end{macrocode}
%
%    \begin{macrocode}
}{}
%    \end{macrocode}
%
% \subsection{Support of the longtable package}
%
% \begin{macro}{\LT@bicaption}
% \changes{v1.1}{2016/01/31}{Adaption to \package{longtable} package added}
% Same as |\@bicaption| but for |longtable| (offered by the \package{longtable} package).
% |\bi|\-|caption@LT|\-|setup| will be executed later on, inside |\LT@make|\-|caption|
% offered by the \package{caption} package.
%    \begin{macrocode}
\newcommand\LT@bicaption{%
  \noalign\bgroup
    \@ifstar
      {\gdef\bicaption@cmd{\LT@c@ption\@gobble}%
       \LT@@bicaption}%
      {\gdef\bicaption@cmd{\LT@c@ption\@firstofone}%
       \caption@dblarg\LT@@@bicaption}}
\newcommand\LT@@bicaption[1]{%
  \LT@@@@bicaption{}{#1}[]}
%    \end{macrocode}
%    \begin{macrocode}
\long\def\LT@@@bicaption[#1]#2{%
  \caption@dblarg{\LT@@@@bicaption{#1}{#2}}}
%    \end{macrocode}
%    \begin{macrocode}
\long\def\LT@@@@bicaption#1#2[#3]#4{%
  \gdef\bicaption@LTsetup{%
    \bicaption@getlabel{#2}%
    \bicaption@LT@setup}%
  \gdef\bicaption@LT@setup{%
    \bicaption@ifswap
      {\bicaption@setup{#1}{#2}}%
      {\bicaption@setup{#3}{#4}}}%
  \bicaption@ifswap
    {\egroup\bicaption@cmd[{#3}]{#4}}%
    {\egroup\bicaption@cmd[{#1}]{#2}}}
%    \end{macrocode}
%    \begin{macrocode}
\let\bicaption@LTsetup\relax
\let\bicaption@LT@setup\relax
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\caption@LT@setup}
% \changes{v1.1}{2016/01/31}{Adaption to \package{longtable} package added}
% \changes{v1.4}{2020/12/25}{Fallback code for \package{caption} package \version{3.2} added}
% Execute the stuff defined by \cs{LT@bicaption} to prepare the typesetting
% of the \package{longtable} bilingual caption.
%    \begin{macrocode}
\caption@ifundefined\caption@LT@setup{%
  % Fallback code for caption v3.2
  \captionsetup*[longtable]{bicaption-lt-setup}
  \DeclareCaptionOptionNoValue{bicaption-lt-setup}{%
    \bicaption@LTsetup
    \global\let\bicaption@LTsetup\relax}
}{%
  \g@addto@macro\caption@LT@setup{%
    \bicaption@LTsetup
    \global\let\bicaption@LTsetup\relax}
}
%    \end{macrocode}
% \end{macro}
%
% \begin{thebibliography}{9}
%   \bibitem{TLC2}
%   Frank Mittelbach and Michel Goossens:\\
%   \newblock {\em The {\LaTeX} Companion (2nd.~Ed.)},\\
%   \newblock Addison-Wesley, 2004.
%
%   \bibitem{listings}
%   Carsten Heinz \& Brooks Moses:\\
%   \href{http://www.ctan.org/pkg/listings}%
%        {\emph{The Listings Package}},\\
%   2007/02/22
%
%   \bibitem{longtable}
%   David Carlisle:\\
%   \href{http://www.ctan.org/pkg/longtable}%
%        {\emph{The longtable package}},\\
%   2004/02/01
% \end{thebibliography}
%
% \iffalse
%</package>
% \fi
%
% \iffalse
% --------------------------------------------------------------------------- %
% \fi
%
% \Finale
%
\endinput