path: root/macros/generic/minifp/minifp.dtx

% \iffalse
% -------------------------------------------------------------------
%
% Copyright 2008--2013, Daniel H. Luecking
%
% minifp may be distributed and/or modified under the conditions of the
% LaTeX Project Public License, either version 1.3b of this license or (at
% your option) any later version. The latest version of this license is in
%    <http://www.latex-project.org/lppl.txt>
% and version 1.3c or later is part of all distributions of LaTeX version
% 2008/12/01 or later.
%
% minifp has maintenance status "author-maintained". The Current Maintainer
% is Daniel H. Luecking. The Base Interpreter is TeX (plain TeX or LaTeX).
%<*driver|sty>
\def\MFPfiledate{2013/12/30}%
\def\MFPfileversion{0.96}%
%</driver|sty>
%
%<*driver>
\ProvidesFile{minifp.dtx}
  [\MFPfiledate\space v\MFPfileversion. Macros for real number operations and a
    stack-based programing language.]%
\documentclass[draft]{ltxdoc}

\addtolength{\textwidth}{1pt}

\usepackage[morefloats=5]{morefloats}
\usepackage{amssymb}
% This avoids messages about nonexistent font variants (e.g., in \section):
\def\mytt{\upshape\mdseries\ttfamily}
% I use it instead of \texttt:
\renewcommand\marg[1]{{\mytt\{#1\}}}
\renewcommand\oarg[1]{{\mytt [#1]}}
\renewcommand\parg[1]{{\mytt (#1)}}
\renewcommand \arg[1]{{\mytt \##1}}
\renewcommand\#{\char`\#\relax}
\DeclareRobustCommand\cs[1]{{\mytt\char`\\#1}}
% sometimes I want a <meta> without enclosing braces:
\renewcommand{\meta}[1]{\mbox{$\langle$\rmfamily\itshape#1\/$\rangle$}}
% and sometimes I want the braces:
\newcommand\mmarg[1]{\marg{\meta{#1}}}

\def\prog#1{{\mdseries\scshape #1}}
\def\mfp{\prog{minifp}}
\def\Mfp{\prog{Minifp}}
\def\file#1{{\mytt #1}}
\let\dim\file
\let\env\file
\def\sgn{\mathop{\mathrm{sgn}}\nolimits}
% \op is for abstract operations (e.g., \op{add}) as opposed to
% the macro that performs it (e.g., \cs{Radd}). And \reg is for
% a "register" (e.g., the 3 macros \MFP@x@Sgn, \MFP@x@Int and \MFP@x@Frc)
% conceived of as a single entity.
\let\op\textit
\def\reg#1{$#1$}
% The occasional bare \tt braces
\renewcommand\{{\char`\{}
\renewcommand\}{\char`\}}
% this gives the alternative symbol in BNF productions, i.e., the bar
% in: { this | that }
\renewcommand\|{${}\mathrel{|}{}$}

\makeatletter
\newcommand\bsl{{\mytt\@backslashchar}}
% better lists
\def\@listi{\leftmargin\leftmargini
  \parsep \z@ \@plus\p@ \@minus\z@
  \topsep 4\p@ \@plus\p@ \@minus2\p@
  \itemsep\parsep}
\let\@listI\@listi \@listi
\renewcommand\labelitemi{\normalfont\bfseries \textendash}
\renewcommand\labelitemii{\textasteriskcentered}
\renewcommand\labelitemiii{\textperiodcentered}
\leftmargini\parindent
% better index
\def\usage#1{\textrm{#1}}
\def\index@prologue{\section*{Index}\markboth{Index}{Index}%
  Numbers refer to the page(s) where the corresponding entry is described.}
\def\IndexParms{%
  \parindent \z@ \columnsep 15pt
  \parskip 0pt plus 1pt
  \rightskip 5pt plus2em \mathsurround \z@
  \parfillskip-5pt \small
  % less hanging:
  \def\@idxitem{\par\hangindent 20pt}%
  \def\subitem{\@idxitem\hspace*{15pt}}%
  \def\subsubitem{\@idxitem\hspace*{25pt}}%
  \def\indexspace{\par\vspace{10pt plus 2pt minus 3pt}}}
\makeatother

\title{The \mfp{} package\thanks{This file has version number
        \fileversion, last revised \filedate. The code described here
        was developed by Dan Luecking.}}
\author{Dan Luecking}
\date{\filedate}
\DisableCrossrefs
\CodelineIndex
\AlsoImplementation

\begin{document}
  \DeleteShortVerb{\|}
  \DocInput{minifp.dtx}
\end{document}
%</driver>
%\fi
% \CheckSum{3541}
% \CharacterTable
%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%   Digits        \0\1\2\3\4\5\6\7\8\9
%   Exclamation   \!     Double quote  \"     Hash (number) \#
%   Dollar        \$     Percent       \%     Ampersand     \&
%   Acute accent  \'     Left paren    \(     Right paren   \)
%   Asterisk      \*     Plus          \+     Comma         \,
%   Minus         \-     Point         \.     Solidus       \/
%   Colon         \:     Semicolon     \;     Less than     \<
%   Equals        \=     Greater than  \>     Question mark \?
%   Commercial at \@     Left bracket  \[     Backslash     \\
%   Right bracket \]     Circumflex    \^     Underscore    \_
%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%   Right brace   \}     Tilde         \~}
%
% \GetFileInfo{minifp.dtx}
% \maketitle
%
% \begin{abstract}
% This package provides minimal fixed point exact decimal arithmetic
% operations. `Minimal' means numbers are limited to eight digits on
% either side of the decimal point. `Exact' means that when a number
% \emph{can} be represented exactly within those limits, it will be.
% \end{abstract}
%
% \StopEventually{\PrintIndex}
% \tableofcontents
%
% \section{Introduction}
% In working on an application that needed to be able to automatically
% generate numeric labels on the axes of a graph, I needed to be able
% to make simple calculations with real numbers. What \TeX{} provides is
% far too limited. In fact, its only native user-level support for real
% numbers is as factors for dimensions. For example one can ``multiply''
% $3.1\times 0.2$ by the following: \verb$\dimen0=0.2pt \dimen0=3.1\dimen0$.
%
% Unfortunately \TeX{} stores dimensions as integer multiples of the
% ``scaled points'' (\dim{sp}) with \dim{sp}${}=2^{-16}$\dim{pt}, and
% therefore \dim{.2pt} is approximated by $\frac{13107}{65536}$, which is
% not exact. Then mutiplying by $3.1$ produces $\frac{40631}{65536}$. If
% we ask \TeX{} to display this, it produces $0.61998$\dim{pt} and not the
% exact value $0.62$. This is sufficiently accurate for positioning
% elements on a page, but not for displaying automatically computed axis
% labels if five digit accuracy is needed.
%
% The \mfp{} package was written to provide the necessary calculations
% with the necessary accuracy for this application. The implementation
% would have been an order of magnitude smaller and faster if only four digit
% accuracy were provided (and I may eventually do that for the application
% under consideration), but I have decided to clean up what I have
% produced and release it as is. The full \mfp{} package provides nearly
% the same operations as a subset of the \prog{fp} package, but the latter
% carries calculations to 18 decimal places, which is far more than
% necessary for my purposes. I want something small and fast to embed in
% the \prog{mfpic} drawing package.
%
% I decided on eight digits on both sides of the decimal point essentially
% because I wanted at least five digits and the design I chose made multiples
% of four the easiest to work with.
%
% \Mfp{} also provides a simple stack-based language for writing assembly
% language-like programs. Originally, this was to be the native
% calculation method, but it turned out to be too unwieldy for ordinary
% use. I left it in because it adds only about 10\% overhead to the code.
%
% But why \emph{only} eight digits? \TeX{} only works with integers, and
% since the maximum integer allowed is about $2\,000\,000\,000$, the
% largest numbers that can be added are limited to about $999\,999\,999$.
% It is very little trouble to add numbers by adding their fractional
% parts and integer parts separately as 9-digit integers. So it would seem
% multiples of $9$ digits would be easy to implement.
%
% However, something we have to do repeatedly in \emph{division} is
% multiply the integer and fractional parts of a number by a one-digit
% number. For that purpose, nine digits would be too much, but eight
% digits is just right. For nine digits, we would have to inconveniently
% break the number into more than two parts. Limiting our numbers to
% eight-digit parts drastically simplifies division.
%
% Another simplification: multiplication has to be done by breaking the
% number into parts. \TeX{} can multiply any two 4-digit integers without
% overflow, but it cannot multiply most pairs of 5-digit integers. Two
% 8-digit numbers conveniently break into four 4-digit parts. To get even
% nine digits of accuracy would require six parts (five, if we don't
% insist on a separation occuring at the decimal point). The complexity of
% the multiplication process goes up as the square of the number of parts,
% so six parts would more than double the complexity.
%
% A final simplification: \TeX{} places a limit of nine on the number of
% arguments a macro can have. Quite often the last argument is needed to
% clear out unused text to be discarded. Thus, a string of eight digits
% can quite often be processed with one execution of one nine-argument
% macro.
%
% Addition and subtraction can be exact, multiplication and division can
% extend numbers past the 8-digit limit so they might be rounded.
% However, when the exact answer fits in the 8-digit limit, our code
% should produce it. Overflow (in the sense that the integer part can
% exceed the allowed eight digits) is always possible, but is much more
% likely with multiplication and division.
%
% Multiplication is carried out internally to an exact answer, with 16
% digits on each side of the decimal point. The underflow digits (places 9
% through 16 after the decimal point) are used to round to an 8-digit
% result. Overflow digits (those to the left of the lowest 8 in the
% integer part) are discarded, usually without warning. Division is
% internally carried to nine digits after the decimal, which is then also
% rounded to an 8-digit result. Overflow digits are ignored for division
% also.
%
% We supply two kinds of operations in this package. There are stack-based
% operations, in which the operands are \op{popped} from a stack and the
% results \op{pushed} onto it, and argument-based, in which the operands (and a
% macro to hold the result^^A
%         \footnote{Unlike most other packages for decimal
%         arithmetic, \mfp{} puts the macro to hold the result
%         last. This allows the calculation to be performed before the
%         macro is even read, and this makes it somewhat easier for the
%         stack- and argument-based versions to share code.}^^A
% ) are arguments of a macro. Both types load the arguments into internal
% macros (think of them as ``registers''), then call internal commands
% (think ``microcode'') which return the results in internal macros.
% These results are then \op{pushed} onto the stack (stack-based
% operations) or stored in a supplied macro argument (think ``variable'').
% The difference lies entirely in where the operands come from (arguments
% or stack) and where they go (macro or stack).
%
% The stack is implemented as an internal macro which is redefined with
% each command. The binary operations act on the last two \op{pushed} objects
% in the order they were \op{pushed}. For example, the sequence ``\op{push} 5,
% \op{push} 3, \op{subtract}'' performs $5-3$ by popping $3$ and $5$ into
% registers (thereby removing them from the stack), subtracting them
% and then pushing the result ($2$) onto the stack.
%
% Our implementation of the \op{push} operation first prepares the number
% in a standard form. Thus, stack-based operations always obtain numbers
% in this form. The argument based operations will prepare the arguments
% in the same way. The internal commands will thus have a standard form to
% operate on. All results are returned in standard form.
%
% The standard form referred to above is an integer part (one to eight digits
% with no unnecessary leading zeros nor unnecessary sign) followed by the
% decimal point (always a dot, which is ASCII \number`\.), followed by exactly
% eight digits, all of this preceded by a minus sign if the number is
% negative. Thus, $-{-0.25}$ would be processed and stored as
% ``\texttt{0.25000000}'' and $-.333333$ as ``\texttt{-0.33333300}''.
%
%
% \section{User macros}
%
% \Mfp{} provides (so far) six binary operations (that act on a pair of
% numbers): addition, subtraction, multiplication, division, maximum and
% minimum, as well as fourteen unary operations (that act on one number):
% negation, absolute value, doubling, halving, integer part, fractional
% part, floor, ceiling, signum, squaring, increment, decrement and
% inversion. With the ``\texttt{extra}'' option, the unary operations
% sine, cosine, logarithm, powers, square root and random number are
% available, and the binary operation angle. See section~\ref{extras}.
%
% These extra operations are made available using the \texttt{extra}
% option in \LaTeX{}:
% \begin{verbatim}
%   \usepackage[extra]{minifp} \end{verbatim}
% In plain \TeX{}, they will be loaded if you give the macro
% \cs{MFPextra} a definition (any definition) before inputting
% \file{minifp.sty}:
% \begin{verbatim}
%   \def\MFPextra{} \input minifp.sty \end{verbatim}
% The extras can also be loaded by means of the command
% \cs{MFPloadextra}, issued after \file{minifp.sty} is loaded.
% As of version 0.95 \file{mfpextra} can be directly \cs{input}.
% It will detect whether \file{minifp.sty} has been loaded and input it
% if not. This will work only in plain \TeX{}.
%
% If the extra operations are not needed, some memory and time might be
% saved by using \file{minifp.sty} alone. I have not seriously tried to
% keep \file{mfpextra.tex} as small or fast as possible, but I do try
% to improve the accuracy when I can.
%
% As previously mentioned, each of these operations come in two versions:
% a version that acts on operands and stores the result in a macro, and a
% version that acts on the stack. The former all have names that begin
% \cs{MFP} and the latter begin with \cs{R}. The former can be used
% anywhere, while the latter can only be used in a ``program''.
% A program is started with \cs{startMFPprogram} and terminated with
% \cs{stopMFPprogram}. The \texttt{R} in the names is for `real'. This is
% because it is possible that stacks of other types will be implemented in
% the future.
%
% For example, \verb$\MFPadd{1.2}{3.4}\X$ will add $1.20000000$ to
% $3.40000000$ and then define \cs{X} to be the resulting
% \texttt{4.60000000}. These operand forms do not alter or even address
% the stack in any way. The stack-based version of the same operation
% would look like the following:
% \begin{verbatim}
%   \Rpush{1.2}
%   \Rpush{3.4}
%   \Radd
%   \Rpop\X \end{verbatim}
% which would \op{push} first \texttt{1.20000000} then \texttt{3.40000000} onto
% the stack, then replace them with \texttt{4.60000000}, then remove that
% and store it in \verb$\X$. Clearly the stack is intended for
% calculations that produce a lot of intermediate values and only the
% final result needs to be stored.
%
% \SpecialUsageIndex{\startMFPprogram}
% The command \cs{startMFPprogram} starts a group. That group should be
% ended by \cs{stopMFPprogram}.
% \SpecialUsageIndex{\stopMFPprogram}
% Changes to the stack and defined macros are local to that group. Thus
% the macro \cs{X} in the example above might seem to be useful only as a
% temporary storage for later calculations in the same program group.
% However, there are commands provided to force such a macro to survive
% the group, and even to force the contents of the stack to survive the
% group (see the end of subsection~\ref{stack}). Do not try to turn a
% \mfp{} program into a \LaTeX{} environment. The extra grouping added by
% environments would defeat the effects of these commands.
%
% \subsection{Nonstack-based operations}
%
% In the following tables, an argument designated \meta{num} can be any
% decimal real number with at most 8 digits on each side of the decimal
% point, or it can be a macro that contains such a number. If the decimal
% dot is absent, the fractional part will be taken to be zero, if the
% integer part or the fractional part is absent, it will be taken to be
% zero. (One consequence of these rules is that all the following
% arguments produce the same internal representation of zero: \marg{0.0},
% \marg{0.}, \marg{.0}, \marg{0}, \marg{.}, and \marg{}\,.) Spaces may
% appear anywhere in the \meta{num} arguments and are stripped out before
% the number is used. For example, \marg{3 . 1415 9265} is a valid
% argument. Commas are not permitted. The decimal point \emph{must} be
% ASCII 46 (variously called a dot, period, or fullstop) with category 12
% (`other'). If an input encoding is used that allows more than one `dot',
% the user must be sure to enter this one. If some babel language
% definitions make it a shorthand, it must be inactivated before use.
%
% The \cs{macro} argument is any legal macro. The result of using one of
% these commands is that the macro is defined (or redefined, there is no
% checking done) to contain the standard form of the result. If the
% \meta{num} is a macro, the braces surrounding it are optional.
%
% \medskip
% \centerline{%
% \begin{tabular}{lp{3in}}
% \textit{Binary Operations}&\\[3pt]
% \hline \hline
%   \textbf{Command}&\textbf{operation}\\
% \hline
%   \SpecialUsageIndex{\MFPadd}^^A
%   \cs{MFPadd}\mmarg{num$_1$}\mmarg{num$_2$}\cs{macro}&
%     Stores the result of \meta{num$_1$}${}+{}$\meta{num$_2$} in \cs{macro}\\
%   \SpecialUsageIndex{\MFPsub}^^A
%   \cs{MFPsub}\mmarg{num$_1$}\mmarg{num$_2$}\cs{macro}&
%     Stores the result of \meta{num$_1$}${}-{}$\meta{num$_2$} in \cs{macro}\\
%   \SpecialUsageIndex{\MFPmul}^^A
%   \cs{MFPmul}\mmarg{num$_1$}\mmarg{num$_2$}\cs{macro}&
%     Stores the result of \meta{num$_1$}${}\times{}$\meta{num$_2$},
%     rounded to 8 places after the decimal point, in \cs{macro}\\
%   \SpecialUsageIndex{\MFPmpy}^^A
%   \cs{MFPmpy}\mmarg{num$_1$}\mmarg{num$_2$}\cs{macro}&
%     Same as \cs{MFPmul}\\
%   \SpecialUsageIndex{\MFPdiv}^^A
%   \cs{MFPdiv}\mmarg{num$_1$}\mmarg{num$_2$}\cs{macro}&
%     Stores the result of \meta{num$_1$}${}/{}$\meta{num$_2$},
%     rounded to 8 places after the decimal point, in \cs{macro}\\
%   \SpecialUsageIndex{\MFPmin}^^A
%   \cs{MFPmin}\mmarg{num$_1$}\mmarg{num$_2$}\cs{macro}&
%     Stores the smaller of \meta{num$_1$} and \meta{num$_2$} in \cs{macro}\\
%   \SpecialUsageIndex{\MFPmax}^^A
%   \cs{MFPmax}\mmarg{num$_1$}\mmarg{num$_2$}\cs{macro}&
%     Stores the larger of \meta{num$_1$} and \meta{num$_2$} in \cs{macro}
% \end{tabular}}
%
%\bigskip
%
% \centerline{%
% \begin{tabular}{lp{3.4in}}
% \textit{Unary Operations}&\\[3pt]
% \hline\hline
%   \textbf{Command}&\textbf{operation}\\
% \hline
%   \SpecialUsageIndex{\MFPchs}^^A
%   \cs{MFPchs}\mmarg{num}\cs{macro}&
%     Stores $-{}$\meta{num} in \cs{macro}.\\
%   \SpecialUsageIndex{\MFPabs}^^A
%   \cs{MFPabs}\mmarg{num}\cs{macro}&
%     Stores $|$\meta{num}$|$ in \cs{macro}.\\
%   \SpecialUsageIndex{\MFPdbl}^^A
%   \cs{MFPdbl}\mmarg{num}\cs{macro}&
%     Stores $2\times{}$\meta{num} in \cs{macro}.\\
%   \SpecialUsageIndex{\MFPhalve}^^A
%   \cs{MFPhalve}\mmarg{num}\cs{macro}&
%     Stores \meta{num}/2, rounded to 8 places after the decimal point, in
%     \cs{macro}.\\
%   \SpecialUsageIndex{\MFPint}^^A
%   \cs{MFPint}\mmarg{num}\cs{macro}&
%     Replaces the part of \meta{num} after the decimal point with zeros
%     (keeps the sign unless the result is zero) and stores the result in
%     \cs{macro}.\\
%   \SpecialUsageIndex{\MFPfrac}^^A
%   \cs{MFPfrac}\mmarg{num}\cs{macro}&
%     Replaces the part of \meta{num} before the decimal point with zero
%     (keeps the sign unless the result is zero) and stores the result in
%     \cs{macro}.\\
%   \SpecialUsageIndex{\MFPfloor}^^A
%   \cs{MFPfloor}\mmarg{num}\cs{macro}&
%     Stores the largest integer not more than \meta{num} in \cs{macro}.\\
%   \SpecialUsageIndex{\MFPceil}^^A
%   \cs{MFPceil}\mmarg{num}\cs{macro}&
%     Stores the smallest integer not less than \meta{num} in \cs{macro}.\\
%   \SpecialUsageIndex{\MFPsgn}^^A
%   \cs{MFPsgn}\mmarg{num}\cs{macro}&
%     Stores $-1$, $0$ or $1$ (in standard form) in \cs{macro} according
%     to whether \meta{num} is negative, zero, or positive.\\
%   \SpecialUsageIndex{\MFPsq}^^A
%   \cs{MFPsq}\mmarg{num}\cs{macro}&
%     Stores the square of \meta{num} in \cs{macro}.\\
%   \SpecialUsageIndex{\MFPinv}^^A
%   \cs{MFPinv}\mmarg{num}\cs{macro}&
%     Stores 1/\meta{num}, rounded to 8 places after the decimal point, in
%     \cs{macro}.\\
%   \SpecialUsageIndex{\MFPincr}^^A
%   \cs{MFPincr}\mmarg{num}\cs{macro}&
%     Stores \meta{num}${}+1$ in \cs{macro}.\\
%   \SpecialUsageIndex{\MFPdecr}^^A
%   \cs{MFPdecr}\mmarg{num}\cs{macro}&
%     Stores \meta{num}${}-1$ in \cs{macro}.\\
%   \SpecialUsageIndex{\MFPzero}^^A
%   \cs{MFPzero}\mmarg{num}\cs{macro}&
%     Ignores \meta{num} and stores {0.00000000} in the \cs{macro}.\\
%   \SpecialUsageIndex{\MFPstore}^^A
%   \cs{MFPstore}\mmarg{num}\cs{macro}&
%     Stores the \meta{num}, converted to standard form, in \cs{macro}
% \end{tabular}}
%
%\bigskip
%
% The command \cs{MFPzero} is useful for ``macro programs''. If you want
% to do something to a number depending on the outcome of a test, you may
% occasionally want to simply absorbed the number and output a default
% result. This is more efficient than multiplying by zero (but less
% efficient than simply defining the \cs{macro} to be zero.)
%
% Note that one could easily double, halve, square, increment,
% decrement or invert a \meta{num} using the binary versions of
% \cs{MFPadd}, \cs{MFPsub}, \cs{MFPmul} or \cs{MFPdiv}. The commands
% \cs{MFPdbl}, \cs{MFPhalve}, \cs{MFPsq}, \cs{MFPincr}, \cs{MFPdecr} and
% \cs{MFPinv} are designed to be more efficient versions, since they are
% used repeatedly in internal code.
%
% Also, multiplication is far more efficient than division, so even if you
% use the two argument versions, \cs{MFPmul}\mmarg{num}\marg{.5} is faster than
% \cs{MFPdiv}\mmarg{num}\marg{2}.
%
% There is one command that takes no argument and returns no value:
%
% \medskip
% \centerline{%
% \begin{tabular}{lp{3.4in}}
% \textit{Do Nothing}&\\[3pt]
% \hline\hline
%   \textbf{Command}&\textbf{operation}\\
% \hline
%   \SpecialUsageIndex{\MFPnoop}\cs{MFPnoop}& Does nothing.
% \end{tabular}}
%
% \bigskip
% The following are not commands at all, but macros that contain
% convenient constants.
%
% \medskip
% \centerline{%
% \begin{tabular}{lp{3.9in}}
% \textit{Constants}&\\[3pt]
% \hline\hline
%   \textbf{Constant}&\textbf{value}\\
% \hline
%   \SpecialUsageIndex{\MFPpi}^^A
%   \cs{MFPpi}& \texttt{3.14159265}, the eight-digit approximation to
%     $\pi$.\\
%   \SpecialUsageIndex{\MFPe}^^A
%   \cs{MFPe}& \texttt{2.71828183}, the eight-digit approximation to
%     $e$.\\
%   \SpecialUsageIndex{\MFPphi}^^A
%   \cs{MFPphi}& \texttt{1.61803399}, the eight-digit approximation to
%     the golden ratio $\phi.$
% \end{tabular}}
%
% \bigskip
% There also exist commands to check the sign of a number and the
% relative size of two numbers:
%
% \medskip
% \indent \SpecialUsageIndex{\MFPchk}\cs{MFPchk}\mmarg{num}\\
% \indent \SpecialUsageIndex{\MFPcmp}\cs{MFPcmp}\mmarg{num$_1$}\mmarg{num$_2$}
%
% \medskip
% \noindent These influence the behavior of six commands:
%
% \medskip
% \indent \SpecialUsageIndex{\IFneg}\cs{IFneg}\mmarg{true text}\mmarg{false text}\\
% \indent \SpecialUsageIndex{\IFzero}\cs{IFzero}\mmarg{true text}\mmarg{false text}\\
% \indent \SpecialUsageIndex{\IFpos}\cs{IFpos}\mmarg{true text}\mmarg{false text}\\
% \indent \SpecialUsageIndex{\IFlt}\cs{IFlt}\mmarg{true text}\mmarg{false text}\\
% \indent \SpecialUsageIndex{\IFeq}\cs{IFeq}\mmarg{true text}\mmarg{false text}\\
% \indent \SpecialUsageIndex{\IFgt}\cs{IFgt}\mmarg{true text}\mmarg{false text}
%
% \medskip
% Issuing \verb$\MFPchk{\X}$ will check the sign of the number stored in
% the macro \cs{X}. Then \verb$\IFneg{A}{B}$ will produce `\verb$A$' if it
% is negative and `\verb$B$' if it is zero or positive. Similarly,
% \verb$\MFPcmp{\X}{1}$ will compare the number stored in \cs{X} to $1$.
% Afterward, \verb$\IFlt{A}{B}$ will produce `\verb$A$' if \cs{X} is less
% than $1$ and `\verb$B$' if \cs{X} is equal to or greater than $1$.
%
% If users finds it tiresome to type two separate commands, they can
% easily define a single command that both checks a value and runs
% \cs{IF...}. For example\\
% \indent\verb$\def\IFisneg#1{\MFPchk{#1}\IFneg}$\\
% Used like\\
% \indent\verb$\IFisneg{\X}{A}{B}$\\
% this will check the value of \cs{X} and run \cs{IFneg} on the pair of
% alternatives that follow.
%
% The user might never need to use \cs{MFPchk} because every one of the
% operators provided by the \mfp{} package runs an internal version of
% \cs{MFPchk} on the result of the operation before storing it in the
% \cs{macro}. For example, after \cs{MFPzero} the command \cs{IFzero} will
% always return the first argument. For this reason one should not insert
% any \mfp{} operations between a check/compare and the \cs{IF...} command
% that depends on it.
%
% Note: the behavior of all six \cs{IF...} commands is influenced by
% \emph{both} \cs{MFPchk} and \cs{MFPcmp}. This is because internally
% \verb$\MFPchk{\X}$ (for example) and \verb$\MFPcmp{\X}{0}$ do
% essentially the same thing. In fact there are only three internal
% booleans that govern the behavior of the six \cs{IF...} commands. The
% different names are for clarity: \cs{IFgt} after a compare is less
% confusing than the entirely equivalent \cs{IFpos}.
%
% It should probably be pointed out that the settings for the \cs{IF...}
% macros are local to any \TeX{} groups they are contained in.
%
%
% \subsection{Commands to process numbers for printing}
%
% After \verb$\MFPadd{1}{2}\X$ one can use \cs{X} anywhere and get
% $3.00000000$. One might may well prefer $3.0$, and so commands are
% provided to truncate a number or round it to some number of decimal
% places. Note: these are provided for printing and they will not invoke
% the above \cs{MFPchk}. They do not have any stack-based versions.
% The commands are\\
% \indent\SpecialUsageIndex{\MFPtruncate}\cs{MFPtruncate}\mmarg{int}\mmarg{num}\cs{macro}\\
% \indent\SpecialUsageIndex{\MFPround}\cs{MFPround}\mmarg{int}\mmarg{num}\cs{macro}\\
% \indent\SpecialUsageIndex{\MFPstrip}\cs{MFPstrip}\mmarg{num}\cs{macro}\\
% where \meta{int} is a whole number between $-8$ and $8$ (inclusive). The
% other two arguments are as before.
%
% These commands merely process \meta{num} and define \cs{macro} to
% produce a truncated or rounded version, or one stripped of trailing
% zeros, or one with added trailing zeros. Note that truncating or
% rounding a number to a number of digits greater than it already has will
% actually lengthen it with added zeros. For example,
%   \verb$\MFPround{4}{3.14159}\X$
% will cause \cs{X} to be defined to contain \texttt{3.1416}, while
%   \verb$\MFPround{6}{3.14159}\X$
% will cause \cs{X} to contain \texttt{3.141590}.
% If \cs{Y} contains \texttt{3.14159}, then
%   \verb$\MFPtruncate{4}\Y\Y$
% will redefine \cs{Y} to contain \texttt{3.1415}. Also,
%   \verb$\MFPstrip{1.20000000}\Z$
% will cause \cs{Z} to contain \texttt{1.2}. All these commands first
% normalize the \meta{num}, so any spaces are removed and redundant signs
% are discarded.
%
% If \meta{int} is negative, places are counted to the left of the decimal
% point and $0$\,s are substituted for lower order digits. That is,
%   \verb$\MFPtruncate{-2}{1864.3}\X$
% will give \cs{X} the value \texttt{1800} and
%   \verb$\MFPround{-2}{1864}\X$
% will give \cs{X} the value \texttt{1900}.
%
% If the first argument of \cs{MFPround} or \cs{MFPtruncate} is zero or
% negative then the dot is also omitted from the result. If \cs{MFPstrip} is
% applied to a number with all zeros after the dot, then one 0 is
% retained. There is a star form where the dot and the zero are dropped.
%
% For these three commands, the sign of the number is irrelevant. That
% is, the results for negative numbers are the negatives of the results
% for the absolute values. The processing will remove redundant signs
% along with redundant leading zeros: \verb$\MFPtruncate{-3}{-+123.456}$
% will produce \texttt{0}. The rounding rule is as follows: round up if
% the digit to the right of the rounding point is $5$ or more, round down if
% the digit is $4$ or less.
%
%
% \subsection{Stack-based macros}\label{stack}
%
% The stack-based macros can only be used in a \mfp{} program group.
% This group is started by the command \cs{startMFPprogram} and ended by
% \cs{stopMFPprogram}. None of the stack-based macros takes an argument,
% but merely operate on values on the stack, replacing them with the
% results. There are also commands to manipulate the stack and save a
% value on the stack into a macro. Finally, since all changes to the stack
% (and to macros) are local and therefore lost after \cs{stopMFPprogram},
% there are commands to selectively cause them to be retained.
%
% To place numbers on the stack we have \cs{Rpush} and to get them
% off we have \cs{Rpop}. The syntax is\\
% \indent \SpecialUsageIndex{\Rpush}\cs{Rpush}\marg{\meta{num}}\\
% \indent \SpecialUsageIndex{\Rpop}\cs{Rpop}\cs{macro}\\
% The first will preprocess the \meta{num} as previously discussed and
% put it on the stack, the second will remove the last number from the stack
% and define the given macro to have that number as its definition.
%
% All the binary operations remove the last two numbers from the stack,
% operate on them in the order they were put on the stack, and \op{push} the
% result on the stack. Thus the program
% \begin{verbatim}
%   \Rpush{1.2}
%   \Rpush{3.4}
%   \Rsub \end{verbatim}
% will first put \texttt{1.20000000} and \texttt{3.40000000} on the stack
% and then replace them with \texttt{-2.20000000}. Note the order: $1.2-3.4$.
%
% \medskip
% \centerline{%
% \begin{tabular}{lp{4.0in}}
%   \textit{Binary Operations}&\\[3pt]
% \hline\hline
%   \textbf{Command}&\textbf{operation}\\
% \hline
%   \SpecialUsageIndex{\Radd}\cs{Radd}&
%     Adds the last two numbers on the stack.\\
%   \SpecialUsageIndex{\Rsub}\cs{Rsub}&
%     Subtracts the last two numbers on the stack.\\
%   \SpecialUsageIndex{\Rmul}\cs{Rmul}&
%     Multiplies the last two numbers on the stack, rounding to 8 decimal
%     places.\\
%   \SpecialUsageIndex{\Rmpy}\cs{Rmpy}&
%     Same as \cs{Rmul}.\\
%   \SpecialUsageIndex{\Rdiv}\cs{Rdiv}&
%     Divides the last two numbers on the stack, rounding to 8 decimal
%     places.\\
%   \SpecialUsageIndex{\Rmin}\cs{Rmin}&
%     Replaces the last two elements on the stack with the smaller one.\\
%   \SpecialUsageIndex{\Rmax}\cs{Rmax}&
%     Replaces the last two elements on the stack with the larger one.
% \end{tabular}}
%
%\bigskip
%
% The unary operations replace the last number on the stack with the
% result of the operation performed on it.
%
% \medskip
% \centerline{%
% \begin{tabular}{lp{4.0in}}
%   \textit{Unary Operations}&\\[3pt]
% \hline\hline
%   \textbf{Command}&\textbf{operation}\\
% \hline
%   \SpecialUsageIndex{\Rchs}\cs{Rchs}&
%     Changes the sign.\\
%   \SpecialUsageIndex{\Rabs}\cs{Rabs}&
%     Obtains the absolute value.\\
%   \SpecialUsageIndex{\Rdbl}\cs{Rdbl}&
%     Doubles the value.\\
%   \SpecialUsageIndex{\Rhalve}\cs{Rhalve}&
%     Halves the value, rounding to 8 places.\\
%   \SpecialUsageIndex{\Rint}\cs{Rint}&
%     Replaces the fractional part with zeros. If the result equals $0.0$, any
%     negative sign will be dropped.\\
%   \SpecialUsageIndex{\Rfrac}\cs{Rfrac}&
%     Replaces the integer part with \texttt{0}. If the result equals
%     $0.0$, any negative sign will be dropped.\\
%   \SpecialUsageIndex{\Rfloor}\cs{Rfloor}&
%     Obtains the largest integer not greater than the number.\\
%   \SpecialUsageIndex{\Rceil}\cs{Rceil}&
%     Obtains the smallest integer not less than the number.\\
%   \SpecialUsageIndex{\Rsgn}\cs{Rsgn}&
%     Obtains $-1$, $0$ or $1$ according to whether the number
%     is negative, zero, or positive. These numbers are pushed onto the
%     stack with the usual decimal point followed by 8 zeros.\\
%   \SpecialUsageIndex{\Rsq}\cs{Rsq}&
%     Obtains the square. Slightly more efficient than the equivalent
%     \cs{Rdup}\cs{Rmul}. See below for \cs{Rdup}.\\
%   \SpecialUsageIndex{\Rinv}\cs{Rinv}&
%     Obtains the reciprocal. Slightly more efficient than the equivalent
%     division.\\
%   \SpecialUsageIndex{\Rincr}\cs{Rincr}&
%     Increases by $1$. Slightly more efficient than the equivalent
%     addition.\\
%   \SpecialUsageIndex{\Rdecr}\cs{Rdecr}&
%     Decreases by $1$. Slightly more efficient than the equivalent
%     subtraction.\\
%   \SpecialUsageIndex{\Rzero}\cs{Rzero}&
%     Replaces the number with zero. Slightly more convenient than the
%     equivalent \cs{Rpop}\cs{X} followed by a \cs{Rpush}\marg{0}.\\
% \end{tabular}}
%
%\bigskip
%
%
% There is one operation, which does not read the stack nor change it
% (nor do anything else).
%
% \medskip
% \centerline{%
% \begin{tabular}{lp{3.8in}}
%   \textit{Do Nothing}&\\[3pt]
% \hline\hline
%   \textbf{Command}&\textbf{operation}\\
% \hline
%   \SpecialUsageIndex{\Rnoop}\cs{Rnoop}&
%     Does nothing.
% \end{tabular}}
%
% \bigskip
% There also exist commands to check the sign of the last number, and the
% relative size of the last two numbers on the stack:\\
% \indent \SpecialUsageIndex{\Rchk}\cs{Rchk}\\
% \indent \SpecialUsageIndex{\Rcmp}\cs{Rcmp}\\
% They do not remove anything from the stack.
% Just like the nonstack counterparts, they influence the behavior of
% six commands: \cs{IFneg}, \cs{IFzero}, \cs{IFpos}, \cs{IFlt},
% \cs{IFeq} and \cs{IFgt}. Issuing \verb$\Rchk$ will check the sign of the
% last number on the stack, while \verb$\Rcmp$ will compare the last two
% in the order they were pushed. For example, in the following
% \begin{verbatim}
%   \Rpush{1.3}
%   \Rpush{-2.3}
%   \Rcmp
%   \IFgt{\Radd}{\Rsub}
%   \Rpush\X
%   \Rchk
%   \IFneg{\Radd}{\Rsub} \end{verbatim}
% \verb$\Rcmp$ will compare $1.3$ to $-2.3$. Since the first is greater
% than the second, \verb$\IFgt$ will be true and they will be added,
% producing $-1.0$. Following this the contents of the macro \cs{X} are
% pushed, it is examined by \verb$\Rchk$ and then either added to or
% subtracted from $-1.0$.
%
% The user might never need to use \cs{Rchk} because every operator that
% puts something on the stack also runs \cs{Rchk}. In the above program,
% in fact, \verb$\Rchk$ is redundant since \verb$\Rpush$ will already have
% run it on the contents of \cs{X}.
%
% There exist stack manipulation commands that allow the contents of the
% stack to be changed without performing any operations. These are really
% just conveniences, as there effects could be obtained with appropriate
% combinations of \verb$\Rpop$ and \verb$\Rpush$. These commands, however, do
% not run \verb$\Rchk$ as \cs{Rpush} would.
%
% \medskip
% \centerline{%
% \begin{tabular}{lp{3.8in}}
%   \textit{Stack Manipulations}&\\[3pt]
% \hline\hline
%   \textbf{Command}&\textbf{operation}\\
% \hline
%   \SpecialUsageIndex{\Rdup}\cs{Rdup}&
%     Puts another copy of the last element of the stack onto the stack.\\
%   \SpecialUsageIndex{\Rexch}\cs{Rexch}&
%     Exchanges the last two elements on the stack.
% \end{tabular}}
%
% \bigskip
%
% After \cs{stopMFPprogram}, any changes to macros or to the stack are
% lost, unless arrangements have been made to save them. There are four
% commands provided. Two act on a macro which is the only argument, the
% other two have no arguments and act on the stack. The macro must
% simply contain a value, it cannot be more complicated and certainly
% cannot take an argument.
%
% \medskip
% \centerline{%
% \begin{tabular}{lp{3.8in}}
%   \textit{Exporting changed values}&\\[3pt]
% \hline\hline
%   \textbf{Command}&\textbf{operation}\\
% \hline
%   \SpecialUsageIndex{\Export}\cs{Export}\cs{macro}&
%     \raggedright
%     Causes the definition of \cs{macro} to survive the
%     program group.\tabularnewline
%   \SpecialUsageIndex{\Global}\cs{Global}\cs{macro}&
%     Causes the definition of \cs{macro} to be global.\\
%   \SpecialUsageIndex{\ExportStack}\cs{ExportStack}&
%     \raggedright
%     Causes the contents of the stack to survive the program
%     group.\tabularnewline
%   \SpecialUsageIndex{\GlobalStack}\cs{GlobalStack}&
%     Causes the contents of the stack to be global.\\
% \end{tabular}}
%
% \bigskip
% The difference between \cs{Export} and \cs{Global} is solely in how
% \emph{other} grouping is handled. If the program group is contained in
% another group (for example, inside an environment), then the result of
% \cs{Global}\cs{X} is that the definition of \cs{X} survives that group
% (and all containing groups) as well. On the other hand, after
% \cs{Export}\cs{X}, then the definition survives the program group, but
% not other containing groups.
%
% If \TeX{} grouping is used \emph{inside} a program group, then using
% \cs{Export} inside that group has no effect at all, while \cs{Global}
% works as before.
%
% The stack versions are implemented by running \cs{Export} or
% \cs{Global} on the internal macro that defines the stack, so they
% have the same behavior.
%
% \subsection{Errors}
%
% If one tries to \op{pop} from an empty stack, an error message will be
% issued. Ignoring the error causes the macro to have the value stored
% in the macro \SpecialUsageIndex{\EndofStack}\verb$\EndofStack$.
% Its default is \texttt{0.00000000}.
%
% If one tries to divide by zero, an error message will be issued.
% Ignoring the error causes the result to be one of the following:
% \begin{itemize}
% \item Dividing $0$ by $0$ gives a result whose integer part is stored
%       in \verb$\ZeroOverZeroInt$\SpecialUsageIndex{\ZeroOverZeroInt}
%       and whose fractional part is stored in
%       \SpecialUsageIndex{\ZeroOverZeroFrac}\verb$\ZeroOverZeroFrac$.
%       The default is \texttt{0.00000000}
% \item Dividing a nonzero $x$ by $0$ gives a result whose integer part is
%       stored in \SpecialUsageIndex{\xOverZeroInt}\verb$\xOverZeroInt$
%       and whose fractional part is stored in
%       \SpecialUsageIndex{\xOverZeroFrac}\verb$\xOverZeroFrac$. The
%       defaults are both equal to \texttt{99999999}. The sign of the
%       result will be the sign of $x$.
% \end{itemize}
%
% You can change any of these macros, but make sure they produce a
% result which is a number in standard form (as described earlier).
% These macros are copied directly into the result without checking.
% Then further processing steps may require the result to be a number in
% standard form.
%
% Error messages may result from trying to process numbers given in
% incorrect format. However, there are so many ways for numbers to be
% incorrect that this package does not even try to detect them. Thus, they
% will only be caught if some \TeX{} operation encounters something it
% cannot handle. (The \LaTeX{} manual calls these ``weird errors'' because
% the messages tend to be uninformative.) Incorrectly formed numbers may even
% pass unnoticed, but leave unexpected printed characters on the paper, or odd
% spacing.
%
% \section{Implementation}
%
% \subsection{Utility macros}
%
% We announce ourself, and our purpose. We save the catcode of
% \texttt{@} and change it to letter. Several other catcodes are saved
% and set to other in this file. We also make provisions to load the
% extra definitions, either directly with \cs{MFPloadextra} or through a
% declared option in \LaTeX{}.
%    \begin{macrocode}
%<*sty>
\expandafter
\ifx \csname MFP@finish\endcsname\relax
\else \expandafter\endinput \fi
\expandafter\edef\csname MFP@finish\endcsname{%
  \catcode64=\the\catcode64 \space
  \catcode46=\the\catcode46 \space
  \catcode60=\the\catcode60 \space
  \catcode62=\the\catcode62 \space}%
\ifx\ProvidesPackage\UndEfInEd
  \newlinechar`\^^J%
  \message{%
      Package minifp: \MFPfiledate\space v\MFPfileversion. %
      Macros for real number operations %
      ^^Jand a stack-based programing language.^^J}%
\else
  \ProvidesPackage{minifp}[\MFPfiledate\space v\MFPfileversion. %
      Macros for real number operations %
      and a stack-based programing language.]%
  \DeclareOption{extra}{\def\MFPextra{}}%
  \ProcessOptions\relax
\fi
\catcode64=11
\ifx\MFPextra\UndEfInEd
  \def\MFP@loadextra{}%
\else
  \def\MFP@loadextra{\input mfpextra\relax}%
\fi
\def\MFPloadextra{\input mfpextra\relax}%
\catcode46=12
\catcode60=12
\catcode62=12
%    \end{macrocode}
%
% We check for \LaTeX{} (ignoring \LaTeX209); \cs{MFP@ifnoLaTeX}\dots\cs{MFP@end}
% is skipped in \LaTeX{} and executed otherwise.
%    \begin{macrocode}
\long\def\gobbleto@MFP@end#1\MFP@end{}%
\def\MFP@end{\@empty}%
\ifx\documentclass\UndEfInEd
  \def\MFP@ifnoLaTeX{}%
\else
  \let\MFP@ifnoLaTeX\gobbleto@MFP@end
\fi
%    \end{macrocode}
%
% We have \LaTeX{}'s \cs{zap@space}. It pretty much \emph{must} be used
% inside \cs{edef} or other purely expansion context. The rest of these
% are standard \LaTeX{} internals. Note that the token list that
% \cs{zap@space} is applied to should probably never contain braces or
% expandable tokens.\\
%  \indent Usage: \verb*$\edef\X{\zap@space<tokens> \@empty}$\\
% The space is necessary in case none exist; the \cs{@empty} terminates
% the loop.
%    \begin{macrocode}
\let\@xp\expandafter
\def\@XP{\@xp\@xp\@xp}%
\MFP@ifnoLaTeX
  \def\@empty{}%
  \long\def\@gobble#1{}%
  \def\zap@space#1 #2{#1\ifx#2\@empty\else\@xp\zap@space\fi#2}%
  \long\def\@ifnextchar#1#2#3{%
    \let\reserved@d#1%
    \def\reserved@a{#2}%
    \def\reserved@b{#3}%
    \futurelet\@let@token\@ifnch}%
  \def\@ifnch{%
    \ifx\@let@token\@sptoken
      \let\reserved@c\@xifnch
    \else
      \ifx\@let@token\reserved@d
        \let\reserved@c\reserved@a
      \else
        \let\reserved@c\reserved@b
      \fi
    \fi
    \reserved@c}%
  {%
    \def\:{\global\let\@sptoken= }\: %
    \def\:{\@xifnch}\@xp\gdef\: {\futurelet\@let@token\@ifnch}%
  }%
  \def\@ifstar#1{\@ifnextchar*{\@firstoftwo{#1}}}%
  \long\def\@firstofone #1{#1}%
  \long\def\@firstoftwo #1#2{#1}%
  \long\def\@secondoftwo#1#2{#2}%
\MFP@end
%    \end{macrocode}
%
% We need to divide by both $10^4$ and $10^8$ several times. I could
% have allocated two count registers, but have taken the approach of
% reserving those for intermediate calculations.
%    \begin{macrocode}
\def\MFP@tttfour {10000}% ttt = Ten To The
\def\MFP@ttteight{100000000}%
%    \end{macrocode}
%
% These are for manipulating digits. The \verb$\...ofmany$ commands
% require a sequence of arguments (brace groups or tokens) followed by
% \verb$\MFP@end$. The minimum number of required parameters is surely
% obvious. For example, \cs{MFP@ninthofmany} must be used like\\
% \indent\cs{MFP@ninthofmany}\meta{9 or more arguments}\cs{MFP@end}\\
% All these are fully expandable.
%    \begin{macrocode}
\def\MFP@oneofmany#1#2\MFP@end{#1}%
\def\MFP@fifthofmany#1#2#3#4#5#6\MFP@end{#5}%
\def\MFP@ninthofmany#1#2#3#4#5#6#7#8{\MFP@oneofmany}%
\def\MFP@eightofmany#1#2#3#4#5#6#7#8#9\MFP@end{#1#2#3#4#5#6#7#8}%
%    \end{macrocode}
%
% \subsection{Processing numbers and the stack}
%
% Our stack stores elements in groups, like \\
% \indent \verb${-1.234567890}{0.00001234}\MFP@eos$\\
% with an end marker. The purpose of the marker is to prevent certain
% parameter manipulations from stripping off braces. This means we can't
% use \cs{@empty} to test for an empty stack. At the moment, only
% \cs{Rpop} actually checks, but all other stack commands (so far) use
% \cs{Rpop} to get their arguments.
%    \begin{macrocode}
\let\MFP@eos\relax
\def\MFP@EOS{\MFP@eos}%
\def\MFP@initRstack{\def\MFP@Rstack{\MFP@eos}}%
\MFP@initRstack
%    \end{macrocode}
%
% Define some scratch registers for arithmetic operations. We don't care
% that these might be already in use, as we only use them inside a group.
% However, we need one counter that will not be messed with by any of
% our operations. I must be sure not to use commands that change
% \cs{MFP@loopctr} in code that depends on it.
%    \begin{macrocode}
\countdef \MFP@tempa 0
\countdef \MFP@tempb 2
\countdef \MFP@tempc 4
\countdef \MFP@tempd 6
\countdef \MFP@tempe 8
\countdef \MFP@tempf 10
\newcount \MFP@loopctr
%    \end{macrocode}
%
% The following can only be used where unrestricted expansion is robust.
% It will allow results obtained inside a group to survive the group,
% but not be unrestrictedly global.
% Example: the code\\
% \indent \verb$\MFP@endgroup@after{\def\noexpand\MFP@z@Val{\MFP@z@Val}}$\\
% becomes\\
% \indent \verb$\edef\x{\endgroup\def\noexpand\MFP@z@Val{\MFP@z@Val}}\x$\\
% which gives, upon expansion of \verb$\x$,\\
% \indent
%   \cs{endgroup}\cs{def}\cs{MFP@z@Val}\marg{\meta{expansion-of-\cs{MFP@z@Val}}}\\
% which defines \cs{MFP@z@Val} outside the current group to equal its expansion
% within the current group (provided the group was started with
% \cs{begingroup}).
%
% We define a \cs{MFP@returned@values} to make all the conceivable produced
% values survive the group. The \cs{MFPcurr@Sgn} part is to permit testing
% the sign of the result and allow conditional code based on it.
%
% I have been lax at making sure \cs{MFP@z@Ovr} is properly initiallized
% and properly checked whenever it could be relevant, and properly
% passed on. I think every internal command \cs{MFP@R}\textit{xxx}
% should ensure it starts being zero and ends with a numerical value. At
% one time division could leave it undefined.
%
% \cs{MFP@subroutine} executes its argument (typically a single command) with
% a wrapper that initializes all the macros that might need initializing,
% and returns the necessary results.
%    \begin{macrocode}
\def\MFP@endgroup@after#1{\edef\x{\endgroup#1}\x}%
\def\MFP@afterdef{\def\noexpand}%
\def\MFP@returned@values{%
  \MFP@afterdef\MFP@z@Val{\MFP@z@Sign\MFP@z@Int.\MFP@z@Frc}%
  \MFP@afterdef\MFP@z@Ovr{\MFP@z@Ovr}%
  \MFP@afterdef\MFP@z@Und{\MFP@z@Und}%
  \MFP@afterdef\MFPcurr@Sgn{\MFP@z@Sgn}}%
\def\MFP@subroutine#1{%
  \begingroup
    \MFP@Rzero
    \def\MFP@z@Ovr{0}%
    \def\MFP@z@Und{0}%
    #1%
  \MFP@endgroup@after\MFP@returned@values}%
\def\MFP@Rzero{%
  \def\MFP@z@Sgn{0}%
  \def\MFP@z@Int{0}%
  \def\MFP@z@Frc{00000000}}%
%    \end{macrocode}
%
% \DescribeMacro{\EndofStack}
% We define here the error messages: popping from an empty stack and
% dividing by zero. In addition to the error messages, we provide some
% default values that hopefully allow some operations to continue.
%
% We also have a warning or two.
%    \begin{macrocode}
\def\MFP@errmsg#1#2{%
\begingroup
  \newlinechar`\^^J\let~\space
  \def\MFP@msgbreak{^^J~~~~~~~~~~~~~~}%
  \edef\reserved@a{\errhelp{#2}}\reserved@a
  \errmessage{MiniFP error: #1}%
\endgroup}%
\def\MFP@popempty@err{%
    \MFP@errmsg{cannot POP from an empty stack}%
      {There were no items on the stack for the POP operation. %
       If you continue, ^^Jthe macro will contain the %
       value \EndofStack.}}%
\def\EndofStack{0.00000000}%
\def\MFP@dividebyzero@err{%
  \MFP@errmsg{division by zero}%
    {You tried to divide by zero. What were you thinking? %
     If you continue, ^^Jthe value assigned will be either %
     \ZeroOverZeroInt.\ZeroOverZeroFrac~(numerator=0) or %
     ^^J+/-\xOverZeroInt.\xOverZeroFrac~(numerator<>0).}}%
\def\MFP@warn#1{%
\begingroup
  \newlinechar`\^^J\let~\space
  \def\MFP@msgbreak{^^J~~~~~~~~~~~~~~~~}%
  \immediate\write16{^^JMiniFP warning: #1.^^J}%
\endgroup}%
%    \end{macrocode}
%
% \DescribeMacro{\MaxRealInt}These are the largest possible integer and
% fractional parts of a real
% \DescribeMacro{\MaxRealFrac}number. They are returned for division by
% zero, for logarithm of zero, and when overflow is detected in the
% exponential function.
%    \begin{macrocode}
\def\MaxRealInt      {99999999}%
\def\MaxRealFrac     {99999999}%
%    \end{macrocode}
%
% \SpecialUsageIndex{\MaxRealInt}
% \SpecialUsageIndex{\MaxRealFrac}
% These are the results returned when trying to divide by zero. Two are
% \DescribeMacro{\xOverZeroInt}
% \DescribeMacro{\xOverZeroFrac}
% used when dividing a nonzero number by zero and and two when trying to
% divide zero by zero.
% \DescribeMacro{\ZeroOverZeroInt}
% \DescribeMacro{\ZeroOverZeroFrac}
%    \begin{macrocode}
\def\xOverZeroInt    {\MaxRealInt}%
\def\xOverZeroFrac   {\MaxRealFrac}%
\def\ZeroOverZeroInt {0}%
\def\ZeroOverZeroFrac{00000000}%
%    \end{macrocode}
%
% These macros strip the spaces, process a number into sign, integer and
% fractional parts, and pad the fractional part out to eight decimals. They
% are used in \op{push} so that the stack will only contains reals in a
% normalized form. Some of them are also used to preprocess the reals in
% the operand versions of commands
%
% The \cs{MFP@*@Int} and \cs{MFP@*@Frc} parts are always positive, the sign being
% stored in \cs{MFP@*@Sgn} as $-1$, $0$ or $1$.
%
% We strip the spaces and pad the fractional parts separately because
% they are unnecessary when processing \op{pop}ped reals (though they wouldn't
% hurt).
%
% The number to be parsed is \arg4 and the macros to contain the parts
% are the first three arguments. Since we normally call \cs{MFPparse@real}
% with one of two sets of macros, we have two shortcuts for those cases.
%    \begin{macrocode}
\def\MFPparse@real#1#2#3#4{%
  \MFPnospace@def\MFPtemp@Val{#4}%
  \MFPprocess@into@parts\MFPtemp@Val#1#2#3%
  \MFP@padtoeight#3}%
\def\MFPparse@x{\MFPparse@real\MFP@x@Sgn\MFP@x@Int\MFP@x@Frc}%
\def\MFPparse@y{\MFPparse@real\MFP@y@Sgn\MFP@y@Int\MFP@y@Frc}%
%    \end{macrocode}
%
% This macro strips all spaces out of the number (not just before and
% after). It takes a macro that will hold the result, followed by the
% number (as a macro or a group of actual digits).
%    \begin{macrocode}
\def\MFPnospace@def#1#2{%
  \edef#1{#2\space}\edef#1{\@xp\zap@space#1\@empty}}%
%    \end{macrocode}
%
% This is the process that splits a number into parts. The biggest
% difficulty is obtaining the sign. All four arguments are macros, with
% the first one holding the number. Following that are the macros to hold
% the sign, integer and fractional parts.
%    \begin{macrocode}
\def\MFPprocess@into@parts#1#2#3#4{%
  \@xp\MFPsplit@dot#1..\MFP@end #3#4%
%    \end{macrocode}
%
% At this point \arg3 holds the part before the dot (or the whole thing
% if there was no dot) and \arg4 holds the part after the dot, (or
% nothing). Now is the first place where having at most eight digits
% simplifies things. Note that \arg3 could contain any number of
% consecutive signs followed by up to eight digits. It could be zero or
% empty, so to avoid losing the sign we append a \texttt{1} (for up to
% nine digits). We temporarily define the sign based on the result, but
% may need to drop it if both the integer and fractional parts are zero.
%
% Prepending a zero to the fractional part pemits it to be empty.
% In the final \cs{edef}, \arg3 is made positive.
%    \begin{macrocode}
  \ifnum#31<0 \def#2{-1}%
  \else \def#2{1}%
  \fi
  \ifnum #30=0
    \def#3{0}%
    \ifnum 0#4=0 \def#2{0}\fi
  \fi
  \edef#3{\number \ifnum #2<0 -\fi#3}}%
%    \end{macrocode}
%
% This only copies the parts before and after the dot, \arg1 and \arg2,
% into macros \arg4 and \arg5.
%    \begin{macrocode}
\def\MFPsplit@dot#1.#2.#3\MFP@end#4#5{\edef#4{#1}\edef#5{#2}}%
%    \end{macrocode}
%
% This is used to pad the fractional part to eight places with zeros. If
% a number with more than eight digits survives to this point, it gets
% truncated.
%    \begin{macrocode}
\def\MFP@padtoeight#1{%
  \edef#1{\@xp\MFP@eightofmany#100000000\MFP@end}}%
%    \end{macrocode}
%
% These take operands off the stack. We know already that there are no
% spaces and that the fractional part has eight digits.
%    \begin{macrocode}
\def\MFPgetoperand@x{\Rpop\MFP@x@Val
  \MFPprocess@into@parts\MFP@x@Val\MFP@x@Sgn\MFP@x@Int\MFP@x@Frc}%
\def\MFPgetoperand@y{\Rpop\MFP@y@Val
  \MFPprocess@into@parts\MFP@y@Val\MFP@y@Sgn\MFP@y@Int\MFP@y@Frc}%
%    \end{macrocode}
%
% Concatenate an argument (or two) to the front of stack. The material
% must already be in correct format. Note: `front' is where they go
% visually (i.e., leftmost) but it can be useful to imagine the stack
% growin rightward (or sometimes even downward).
%
% Note that the result of \verb$\MFP@cattwo{#1}{#2}$ is the same as
% \verb$\MFP@cat{#2}$ followed by \verb$\MFP@cat{#1}$. It seemed that
% reversing the arguments in \cs{MFP@Rcattwo} confused me more than this
% fact.
%    \begin{macrocode}
\def\MFP@Rcat#1{\edef\MFP@Rstack{{#1}\MFP@Rstack}}%
\def\MFP@Rcattwo#1#2{\edef\MFP@Rstack{{#1}{#2}\MFP@Rstack}}%
%    \end{macrocode}
%
% Convert from a signum (a number) to a sign ($-$ or nothing):
%    \begin{macrocode}
\def\MFP@Sign#1{\ifnum#1<0 -\fi}%
\def\MFP@x@Sign{\MFP@Sign\MFP@x@Sgn}%
\def\MFP@y@Sign{\MFP@Sign\MFP@y@Sgn}%
\def\MFP@z@Sign{\MFP@Sign\MFP@z@Sgn}%
%    \end{macrocode}
%
% Sometimes only parts of the number needs changing (used in CHS, ABS).
% This copies the integer and fractional parts of $x$ into $z$.
%    \begin{macrocode}
\def\copyMFP@x{\edef\MFP@z@Int{\MFP@x@Int}\edef\MFP@z@Frc{\MFP@x@Frc}}%
%    \end{macrocode}
%
% We use \cs{MFPpush@result} to put the result of internal operations onto
% the stack. For convenience, we also have it set the sign flags.
%    \begin{macrocode}
\def\MFPpush@result{\MFP@Rchk\MFPcurr@Sgn\MFP@Rcat\MFP@z@Val}%
%    \end{macrocode}
%
% When \op{pop} encounters an empty stack it gobbles the code that would
% perform the \op{pop} (\arg1) and defines the macro (\arg2) to contain
% \cs{EndofStack}. The default meaning for this macro is $0$.
%    \begin{macrocode}
\def\if@EndofStack{%
  \ifx\MFP@EOS\MFP@Rstack
    \@xp\@firstoftwo
  \else
    \@xp\@secondoftwo
  \fi}%
%    \end{macrocode}
%
% The macro \cs{Rpop} calls \cs{MFP@popit} followed by the contents of the
% stack, the token \cs{MFP@end} and the macro to \op{pop} into. If the stack is
% not empty, \cs{doMFP@popit} will read the first group \arg1 into that macro
% \arg3, and then redefine the stack to be the rest of the argument \arg2.
% If the stack is empty, \cs{doMFP@EOS} will equate the macro to
% \cs{EndofStack} (initialized to {\tt0.00000000}) after issuing an error
% message.
%    \begin{macrocode}
\def\MFP@popit{\if@EndofStack\doMFP@EOS\doMFP@popit}%
\def\doMFP@EOS#1\MFP@end#2{\MFP@popempty@err\let#2\EndofStack}%
\def\doMFP@popit#1#2\MFP@end#3{\edef\MFP@Rstack{#2}\edef#3{#1}}%
%    \end{macrocode}
%
% \subsection{The user-level operations}
%
% All operations that can be done on arguments as well as the stack will
% have a common format: The stack version pops the requisite numbers and
% splits them into internal macros (\cs{MFPgetoperand@*}), runs an internal
% command that operates on these internal macros, then ``pushes'' the result
% returned. The internal commands take care to return the result in proper
% form so we don't actually run \cs{Rpush}, but only \cs{MFPpush@result}.
%
% The operand version processes the operands into normalized form (as if
% pushed, using \cs{MFPparse@*}), then proceeds as in the stack version, but
% copies the result into the named macro instead of to the stack
% (\cs{MFPstore@result}).
%
% For unary operations we process one argument or stack element. We call
% it $x$ and use the \texttt{x} version of all macros. All internal
% commands (\arg1) return the results in \texttt{z} versions.
%
% \DescribeMacro{\MFPchk}
% The \cs{MFPchk} command examines its argument and sets a flag according to
% its sign.
%    \begin{macrocode}
\def\MFPchk#1{%
  \MFPparse@x{#1}%
  \MFP@Rchk\MFP@x@Sgn}%
%    \end{macrocode}
%
% We make \cs{MFP@Rchk} a little more general than is strictly needed here,
% by giving it an argument (instead of only examining \cs{MFP@x@Sgn}). This is
% so we can apply it to the results of operations (which would be in
% \cs{MFPcurr@Sgn}).
%    \begin{macrocode}
\def\MFP@Rchk#1{%
  \MFPclear@flags
  \ifnum#1>0  \MFP@postrue
  \else\ifnum#1<0  \MFP@negtrue
  \else  \MFP@zerotrue
  \fi\fi}%
\def\MFPclear@flags{\MFP@zerofalse \MFP@negfalse \MFP@posfalse}%
%    \end{macrocode}
%
% \DescribeMacro{\IFzero}
% \DescribeMacro{\IFneg}
% \DescribeMacro{\IFpos}
% These are the user interface to the internal \cs{ifMFP@zero},
% \cs{ifMFP@neg}, \cs{ifMFP@pos}
%    \begin{macrocode}
\def\IFzero{\ifMFP@zero\@xp\@firstoftwo\else\@xp\@secondoftwo\fi}%
\def\IFneg {\ifMFP@neg \@xp\@firstoftwo\else\@xp\@secondoftwo\fi}%
\def\IFpos {\ifMFP@pos \@xp\@firstoftwo\else\@xp\@secondoftwo\fi}%
\newif\ifMFP@zero \newif\ifMFP@neg \newif\ifMFP@pos
%    \end{macrocode}
%
% Our comparison commands parallel the check-sign commands. They even
% \DescribeMacro{\MFPcmp}
% reuse the same internal booleans. The differences: the internal
% \DescribeMacro{\IFeq}
% \cs{MFP@Rcmp} doesn't take arguments and the comparison test is a little
% \DescribeMacro{\IFlt}
% more involved. We could simply subtract, which automatically sets the
% \DescribeMacro{\IFgt}
% internal booleans, but it is way more efficient to compare sizes
% directly.
%    \begin{macrocode}
\newif\ifMFPdebug
\def\MFPcmp#1#2{\MFPparse@x{#1}\MFPparse@y{#2}\MFP@Rcmp}%
\def\MFP@Rcmp{\MFPclear@flags
  \ifnum \MFP@x@Sign\MFP@x@Int>\MFP@y@Sign\MFP@y@Int\relax
    \MFP@postrue
  \else\ifnum \MFP@x@Sign\MFP@x@Int<\MFP@y@Sign\MFP@y@Int\relax
    \MFP@negtrue
  \else\ifnum \MFP@x@Sign\MFP@x@Frc>\MFP@y@Sign\MFP@y@Frc\relax
    \MFP@postrue
  \else\ifnum \MFP@x@Sign\MFP@x@Frc<\MFP@y@Sign\MFP@y@Frc\relax
    \MFP@negtrue
  \else
    \MFP@zerotrue
  \fi\fi\fi\fi}%
\let\IFeq\IFzero\let\IFlt\IFneg \let\IFgt\IFpos
%    \end{macrocode}
%
% Given an operation (\op{pop}, \op{chs}, or whatever), the stack version will
% have the same name with ``\texttt{R}'' (for ``real'') prepended. The operand
% versions will have the same name with ``\texttt{MFP}'' prepended. The
% internal version has the same name as the stack version, with an
% ``\texttt{MFP@}'' prepended.
%
% The unary operations are:
% \begin{description}
%   \item[chs]   change sign of $x$.
%   \item[abs]   absolute value of $x$.
%   \item[dbl]   double $x$.
%   \item[halve] halve $x$.
%   \item[sgn]   $+1$, $-1$ or $0$ depending on the sign of $x$.
%   \item[sq]    square $x$.
%   \item[int]   zero out the fractional part of $x$.
%   \item[frac]  zero out the integer part of $x$.
%   \item[floor] largest integer not exceeding $x$.
%   \item[ceil]  smallest integer not less than $x$.
% \end{description}
%
% The binary operations are ($x$ represents the first and $y$ second):
% \begin{description}
%   \item[add]   add $x$ and $y$.
%   \item[sub]   subtract $y$ from $x$.
%   \item[mul]   multiply $x$ and $y$.
%   \item[div]   divide $x$ by $y$.
% \end{description}
%
% There are also some operations that do not actually change any
% values, but may change the stack or the state of some boolean:
% \begin{description}
%   \item[cmp] compare $x$ and $y$ (stack version does not change stack).
%   \item[chk] examine the sign of $x$ (stack version does not change stack).
%   \item[dup] stack only, duplicate the top element of the stack.
%   \item[push] stack only, put a value onto the top of the stack.
%   \item[pop] stack only, remove the top element of the stack,
%              store it in a variable.
%   \item[exch] stack only, exchange top two elements of the stack.
% \end{description}
%
% \DescribeMacro{\startMFPprogram}
% The purpose of \cs{startMFPprogram} is to start the group, inside of
% which all the stack operations can be used. The ensuing
% \DescribeMacro{\stopMFPprogram}
% \cs{stopMFPprogram} closes the group.
%    \begin{macrocode}
\def\startMFPprogram{%
\begingroup
%    \end{macrocode}
%
% \DescribeMacro{\Rchs}
% \DescribeMacro{\Rabs}
% \DescribeMacro{\Rdbl}
% \DescribeMacro{\Rhalve}
% \DescribeMacro{\Rsgn}
% Then  we give definitions to all the stack-based macros.
% These definitions are all lost after the group ends.
%
% \DescribeMacro{\Rsq}
% \DescribeMacro{\Rinv}
% \DescribeMacro{\Rint}
% \DescribeMacro{\Rfrac}
% \DescribeMacro{\Rfloor}
% \DescribeMacro{\Rceil}
% \DescribeMacro{\Rincr}
% \DescribeMacro{\Rdecr}
% \DescribeMacro{\Rzero}
% We start with the unary operations. Note that all they do is call a
% wrapper macro \cs{MFP@stack@Unary} with an argument which is the internal
% version of the command.
%    \begin{macrocode}
  \def\Rchs  {\MFP@stack@Unary\MFP@Rchs}%
  \def\Rabs  {\MFP@stack@Unary\MFP@Rabs}%
  \def\Rdbl  {\MFP@stack@Unary\MFP@Rdbl}%
  \def\Rhalve{\MFP@stack@Unary\MFP@Rhalve}%
  \def\Rsgn  {\MFP@stack@Unary\MFP@Rsgn}%
  \def\Rsq   {\MFP@stack@Unary\MFP@Rsq}%
  \def\Rinv  {\MFP@stack@Unary\MFP@Rinv}%
  \def\Rint  {\MFP@stack@Unary\MFP@Rint}%
  \def\Rfrac {\MFP@stack@Unary\MFP@Rfrac}%
  \def\Rfloor{\MFP@stack@Unary\MFP@Rfloor}%
  \def\Rceil {\MFP@stack@Unary\MFP@Rceil}%
  \def\Rincr {\MFP@stack@Unary\MFP@Rincr}%
  \def\Rdecr {\MFP@stack@Unary\MFP@Rdecr}%
  \def\Rzero {\MFP@stack@Unary\MFP@Rzero}%
%    \end{macrocode}
%
% \DescribeMacro{\Radd}
% \DescribeMacro{\Rsub}
% \DescribeMacro{\Rmul}
% \DescribeMacro{\Rmpy}
% \DescribeMacro{\Rdiv}
% \DescribeMacro{\Rmin}
% \DescribeMacro{\Rmax}
% Then the binary operations, which again call a wrapper around
% the internal version.
%    \begin{macrocode}
  \def\Radd  {\MFP@stack@Binary\MFP@Radd}%
  \def\Rmul  {\MFP@stack@Binary\MFP@Rmul}%
  \let\Rmpy\Rmul
  \def\Rsub  {\MFP@stack@Binary\MFP@Rsub}%
  \def\Rdiv  {\MFP@stack@Binary\MFP@Rdiv}%
  \def\Rmin  {\MFP@stack@Binary\MFP@Rmin}%
  \def\Rmax  {\MFP@stack@Binary\MFP@Rmax}%
%    \end{macrocode}
%
% \DescribeMacro{\Rnoop}
% \DescribeMacro{\Rcmp}
% \DescribeMacro{\Rchk}
% \DescribeMacro{\Rpush}
% \DescribeMacro{\Rpop}
% \DescribeMacro{\Rexch}
% \DescribeMacro{\Rdup}
% And finally some special commands. There is a no-op and commands for
% comparing, checking, and manipulation of the stack. Note that
% \cs{Rcmp} parses the last two elements on the stack, then puts them back
% before calling the internal command that operates on the parsed parts.
% The same is true of \cs{Rchk}, but only the last stack element is
% examined.
%    \begin{macrocode}
  \let\Rnoop\relax
  \def\Rcmp{%
    \MFPgetoperand@y\MFPgetoperand@x
    \MFP@Rcattwo\MFP@y@Val\MFP@x@Val
    \MFP@Rcmp}%
  \def\Rchk{%
    \MFPgetoperand@x
    \MFP@Rcat\MFP@x@Val
    \MFP@Rchk\MFP@x@Sgn}%
  \def\Rpush##1{%
    \MFPparse@x{##1}%
    \edef\MFP@z@Val{\MFP@x@Sign\MFP@x@Int.\MFP@x@Frc}%
    \edef\MFPcurr@Sgn{\MFP@x@Sgn}%
    \MFPpush@result}%
  \def\Rpop{\@xp\MFP@popit\MFP@Rstack\MFP@end}%
  \def\Rexch{%
    \Rpop\MFP@y@Val\Rpop\MFP@x@Val
    \MFP@Rcattwo\MFP@x@Val\MFP@y@Val}%
  \def\Rdup{%
    \Rpop\MFP@x@Val
    \MFP@Rcattwo\MFP@x@Val\MFP@x@Val}%
%    \end{macrocode}
%
% If \file{mfpextra.tex} is input, then \cs{MFP@Rextra} makes the
% additional commands in that file available to an \mfp{} program.
%
% \DescribeMacro{\Global}
% \DescribeMacro{\GlobalStack}
% \DescribeMacro{\Export}
% \DescribeMacro{\ExportStack}
% The last four commands allow computed values to be made available
% outside the program group
%    \begin{macrocode}
  \MFP@Rextra
  \let\Global\MFP@Global
  \let\GlobalStack\MFP@GlobalStack
  \let\Export\MFP@Export
  \let\ExportStack\MFP@ExportStack}%
\def\stopMFPprogram{\@xp\endgroup\MFPprogram@returns}%
\let\MFP@Rextra\@empty
\let\MFPprogram@returns\@empty
%    \end{macrocode}
%
% \DescribeMacro{\MFPchs}
% \DescribeMacro{\MFPabs}
% \DescribeMacro{\MFPdbl}
% \DescribeMacro{\MFPhalve}
% \DescribeMacro{\MFPsgn}
% \DescribeMacro{\MFPsq}
% \DescribeMacro{\MFPinv}
% Now we define the operand versions. These also are defined via a
% wrapper command that executes the very same internal commands as the
% stack versions.
%
% \DescribeMacro{\MFPint}
% \DescribeMacro{\MFPfrac}
% \DescribeMacro{\MFPfloor}
% \DescribeMacro{\MFPceil}
% \DescribeMacro{\MFPincr}
% \DescribeMacro{\MFPdecr}
% \DescribeMacro{\MFPzero}
% \DescribeMacro{\MFPstore}
% First the unary operations.
%    \begin{macrocode}
\def\MFPchs  {\MFP@op@Unary\MFP@Rchs}%
\def\MFPabs  {\MFP@op@Unary\MFP@Rabs}%
\def\MFPdbl  {\MFP@op@Unary\MFP@Rdbl}%
\def\MFPhalve{\MFP@op@Unary\MFP@Rhalve}%
\def\MFPsgn  {\MFP@op@Unary\MFP@Rsgn}%
\def\MFPsq   {\MFP@op@Unary\MFP@Rsq}%
\def\MFPinv  {\MFP@op@Unary\MFP@Rinv}%
\def\MFPint  {\MFP@op@Unary\MFP@Rint}%
\def\MFPfrac {\MFP@op@Unary\MFP@Rfrac}%
\def\MFPfloor{\MFP@op@Unary\MFP@Rfloor}%
\def\MFPceil {\MFP@op@Unary\MFP@Rceil}%
\def\MFPincr {\MFP@op@Unary\MFP@Rincr}%
\def\MFPdecr {\MFP@op@Unary\MFP@Rdecr}%
\def\MFPzero {\MFP@op@Unary\MFP@Rzero}%
\def\MFPstore{\MFP@op@Unary\MFP@Rstore}%
%    \end{macrocode}
%
% \DescribeMacro{\MFPadd}
% \DescribeMacro{\MFPsub}
% \DescribeMacro{\MFPmul}
% \DescribeMacro{\MFPmpy}
% \DescribeMacro{\MFPdiv}
% \DescribeMacro{\MFPmin}
% \DescribeMacro{\MFPmax}
% Then the binary operations.
%    \begin{macrocode}
\def\MFPadd{\MFP@op@Binary\MFP@Radd}%
\def\MFPmul{\MFP@op@Binary\MFP@Rmul}%
\let\MFPmpy\MFPmul
\def\MFPsub{\MFP@op@Binary\MFP@Rsub}%
\def\MFPdiv{\MFP@op@Binary\MFP@Rdiv}%
\def\MFPmin{\MFP@op@Binary\MFP@Rmin}%
\def\MFPmax{\MFP@op@Binary\MFP@Rmax}%
%    \end{macrocode}
%
% A \emph{nullary} operation is one that produces a result with no
% operand. Thus, it could return a fixed constant, or it could perform
% calculations that obtain input from the system (e.g., current time). At
% the moment we don't define any.
%    \begin{macrocode}
\def\MFP@stack@Nullary#1{%
  \MFP@subroutine{#1}\MFPpush@result}%
\def\MFP@op@Nullary#1{%
  \MFP@subroutine{#1}\MFPstore@result}%
%    \end{macrocode}
%
% These are the wrappers for unary operations. The operand versions have a
% second argument, the macro that stores the result. But this will be the
% argument of \cs{MFPstore@result}.
%    \begin{macrocode}
\def\MFP@stack@Unary#1{%
  \MFPgetoperand@x
  \MFP@subroutine{#1}\MFPpush@result}%
\def\MFP@op@Unary#1#2{%
  \MFPparse@x{#2}%
  \MFP@subroutine{#1}\MFPstore@result}%
\def\MFPstore@result#1{\MFP@Rchk\MFPcurr@Sgn\edef#1{\MFP@z@Val}}%
%    \end{macrocode}
%
% These are the wrappers for binary operations. The top level definitions
% are almost identical to those of the unary operations. The only difference
% is they \op{pop} or parse two operands.
%    \begin{macrocode}
\def\MFP@stack@Binary#1{%
  \MFPgetoperand@y \MFPgetoperand@x
  \MFP@subroutine{#1}\MFPpush@result}%
\def\MFP@op@Binary#1#2#3{%
  \MFPparse@x{#2}\MFPparse@y{#3}%
  \MFP@subroutine{#1}\MFPstore@result}%
%    \end{macrocode}
%
% \DescribeMacro{\MFPnoop}
% We end with a traditional, but generally useless command, the no-op,
% which does nothing. It doesn't even have a wrapper.
%    \begin{macrocode}
\let\MFPnoop\relax
%    \end{macrocode}
%
% \subsection{The internal computations}
%
% To change the sign or get the absolute value, we just need to set the
% value of \cs{MFP@x@Sgn}.
%    \begin{macrocode}
\def\MFP@Rabs{%
  \copyMFP@x \edef\MFP@z@Sgn{\ifnum\MFP@x@Sgn=0 0\else1\fi}}%
\def\MFP@Rchs{\copyMFP@x \edef\MFP@z@Sgn{\number-\MFP@x@Sgn}}%
%    \end{macrocode}
%
% The doubling and halving operations are more efficient ways to
% multiply or divide a number by $2$. For doubling, copy $x$ to $y$
% and add. For halving, we use basic \TeX{} integer division, more
% efficient than multiplying by $0.5$ and far more than using
% \cs{MFP@Rdiv}.
%
% In \cs{MFP@Rhalve}. we add $1$ to the fractional part for rounding
% purposes, and we move any odd 1 from the end of the integer part to the
% start of the fractional part.
%    \begin{macrocode}
\def\MFP@Rdbl{\MFP@Rcopy xy\MFP@Radd}%
\def\MFP@Rhalve{%
  \MFP@tempa\MFP@x@Int
  \MFP@tempb\MFP@x@Frc\relax
  \ifodd\MFP@tempb
    \def\MFP@z@Und{5}%
    \advance\MFP@tempb 1
    \ifnum\MFP@ttteight=\MFP@tempb
       \MFP@tempb0 \advance\MFP@tempa1
    \fi
  \fi
  \ifodd \MFP@tempa
    \advance\MFP@tempb \MFP@ttteight\relax
  \fi
  \divide\MFP@tempa 2
  \divide\MFP@tempb 2
  \MFP@Rloadz\MFP@x@Sgn\MFP@tempa\MFP@tempb}%
%    \end{macrocode}
%
% The signum is $0.0$, $1.0$ or $-1.0$ to match the sign of $x$.
%    \begin{macrocode}
\def\MFP@Rsgn{\MFP@Rloadz \MFP@x@Sgn{\ifnum\MFP@x@Sgn=0 0\else1\fi}0}%
%    \end{macrocode}
%
% The squaring operation just calls \cs{MFP@Rmul} after copying $x$ to
% $y$. Its gain in efficiency over a multiplication is that it can skip
% preprocessing of the second (identical) operand.
%    \begin{macrocode}
\def\MFP@Rsq{\MFP@Rcopy xy\MFP@Rmul}%
%    \end{macrocode}
%
% The inversion operation just calls \cs{MFP@Rdiv} after copying $x$ to
% $y$ and $1$ to $x$. Its advantage over a divide is it skips the
% preprocessing of $1$ as an operand.
%    \begin{macrocode}
\def\MFP@Rinv{\MFP@Rcopy xy\MFP@Rload x110\MFP@Rdiv}%
%    \end{macrocode}
%
% Integer part: replace fractional part with zeros.
%    \begin{macrocode}
\def\MFP@Rint{%
  \MFP@Rloadz {\ifnum\MFP@x@Int=0 0\else\MFP@x@Sgn\fi}\MFP@x@Int 0}%
%    \end{macrocode}
%
% Fractional part: replace integer part with a zero.
%    \begin{macrocode}
\def\MFP@Rfrac{%
  \MFP@Rloadz {\ifnum\MFP@x@Frc=0 0\else\MFP@x@Sgn\fi}0\MFP@x@Frc}%
%    \end{macrocode}
%
% To increment and decrement by $1$, except in border cases, we need only
% address the integer part of a number. This doesn't seem so simple
% written out but, even so, it is more efficient than full-blown addition.
% It would be very slightly more efficient if \cs{MFP@Rdecr} did not call
% \cs{MFP@Rincr}, but instead was similarly coded.
%    \begin{macrocode}
\def\MFP@Rincr{%
 \ifnum\MFP@x@Sgn<0
   \ifcase\MFP@x@Int
     \MFP@tempa\MFP@ttteight
     \advance\MFP@tempa -\MFP@x@Frc\relax
     \MFP@Rloadz 10\MFP@tempa
   \or
      \MFP@Rloadz{\ifnum\MFP@x@Frc=0 0\else -1\fi}0\MFP@x@Frc
   \else
     \MFP@tempa\MFP@x@Int
     \advance\MFP@tempa -1
     \MFP@Rloadz{-1}\MFP@tempa\MFP@x@Frc
   \fi
 \else
   \MFP@tempa\MFP@x@Int
   \advance\MFP@tempa 1
   \MFP@Rloadz 1\MFP@tempa\MFP@x@Frc
 \fi}%
\def\MFP@Rdecr{%
  \edef\MFP@x@Sgn{\number -\MFP@x@Sgn}\MFP@Rincr
  \edef\MFP@z@Sgn{\number -\MFP@z@Sgn}}%
\def\MFP@Rstore{\MFP@Rcopy xz}%
%    \end{macrocode}
%
% The floor of a real number $x$ is the largest integer not larger than
% $x$. The ceiling is the smallest integer not less than $x$. For
% positive $x$, floor is the same as integer part. Not true for negative
% $x$. Example: $\mathop{\mathrm{int}}(-1.5) = -1$ but
% $\mathop{\mathrm{floor}}=-2$
%
% We use the same code to get floor or ceiling, the
% appropriate inequality character being its argument.
%    \begin{macrocode}
\def\MFP@Rfloorceil#1{%
  \MFP@tempa\MFP@x@Int\relax
  \ifnum \MFP@x@Sgn #10
    \ifnum\MFP@x@Frc=0
    \else
      \advance\MFP@tempa1
    \fi
  \fi
  \MFP@Rloadz{\ifnum\MFP@x@Int=0 0\else\MFP@x@Sgn\fi}\MFP@tempa0}%
\def\MFP@Rfloor{\MFP@Rfloorceil<}%
\def\MFP@Rceil {\MFP@Rfloorceil>}%
%    \end{macrocode}
%
% For multiplication, after the usual break into integer and fractional
% parts, we further split these parts into $4$-digit pieces with
% \cs{MFP@split}. The first argument (\arg1) holds the eight digit number,
% then \arg2 is a macro that will hold the top four digits and \arg3 will
% hold the bottom four.
%    \begin{macrocode}
\def\MFP@split#1#2#3{%
  \begingroup
    \MFP@tempa#1\relax
    \MFP@tempb\MFP@tempa
    \divide\MFP@tempb by\MFP@tttfour
    \edef#2{\number\MFP@tempb}%
    \multiply\MFP@tempb by\MFP@tttfour
    \advance\MFP@tempa-\MFP@tempb
  \MFP@endgroup@after{%
    \MFP@afterdef#2{#2}%
    \MFP@afterdef#3{\number\MFP@tempa}%
  }}%
%
\def\MFP@@split{%
  \MFP@split\MFP@x@Int\MFP@x@Int@ii\MFP@x@Int@i
  \MFP@split\MFP@x@Frc\MFP@x@Frc@i\MFP@x@Frc@ii
  \MFP@split\MFP@y@Int\MFP@y@Int@ii\MFP@y@Int@i
  \MFP@split\MFP@y@Frc\MFP@y@Frc@i\MFP@y@Frc@ii}%
%    \end{macrocode}
%
% We will store the intermediate and final products in \cs{MFP@z@*}. Each one
% is ultimately reduced to four digits, like the parts of $x$ and $y$. As each
% base-$10000$ digit of $y$ is multiplied by a digit of $x$, we add the
% result to the appropriate digit of the partial result $z$.
%
% The underflow ends up in \cs{MFP@z@Frc@iv} and \cs{MFP@z@Frc@iii}.
% Overflow will be in \cs{MFP@z@Int@iii}. Unlike the rest, it can be up to
% eight digits because we do not need to carry results out of it.
%
% This command prepends zeros so a number fills four slots. Here \arg1 is
% a macro holding the value and it is redefined to contain the result. A
% macro that calls this should ensure that \arg1 is not empty and is less
% than 10,000.
%    \begin{macrocode}
\def\makeMFP@fourdigits#1{%
  \edef#1{\@xp\MFP@fifthofmany\number#1{}{0}{00}{000}\MFP@end\number#1}}%
%    \end{macrocode}
%
% This is the same, but produces eight digits. Similarly \arg1 should be
% nonempty and less than 100,000,000.
%    \begin{macrocode}
\def\makeMFP@eightdigits#1{%
  \edef#1{\@xp\MFP@ninthofmany\number#1%
    {}{0}{00}{000}{0000}{00000}{000000}{0000000}\MFP@end\number#1}}%
%    \end{macrocode}
%
% The following macros implement carrying. The macros \cs{MFP@carrya} and
% \cs{MFP@carrym} should be followed by two macros that hold numbers. The
% first number can have too many digits. These macros remove extra digits
% from the front and add their value to the number in the second macro
% (the ``carry''). Both act by calling \cs{MFP@carry}, which is told the
% number of digits to keep via \arg1 (10,000 for four digits,
% 100,000,000 for eight). The ``\texttt{a}'' in \cs{MFP@carrya} is for
% addition and ``\texttt{m}'' is for multiplication, which indicates where
% these will mainly be used.
%    \begin{macrocode}
\def\MFP@carrya{\MFP@carry\MFP@ttteight}%
\def\MFP@carrym{\MFP@carry\MFP@tttfour}%
\def\MFP@carry#1#2#3{%
  \begingroup
    \MFP@carryi{#1}#2#3%
  \MFP@endgroup@after{%
    \MFP@afterdef#3{\number\MFP@tempa}%
    \MFP@afterdef#2{\number\MFP@tempb}%
  }}%
%    \end{macrocode}
%
% This is the ``internal'' carry. \arg1, \arg2, and \arg3 are as in
% \cs{MFP@carry}. Its advantage is that it can be used used where \arg2
% and \arg3 are not macros, leaving the result in \cs{MFP@tempa} and
% \cs{MFP@tempb} with \cs{MFP@tempb} in the correct range,
% $[0,\mbox{\arg1})$. Its disadvantage is it does not protect temporary
% registers. Warning: do not use it with \arg2=\cs{MFP@tempa} and do not
% use it without grouping if you want to preserve the values in these
% temporary count registers.
%    \begin{macrocode}
\def\MFP@carryi#1#2#3{%
    \MFP@tempa=#3\relax
    \MFP@tempb=#2\relax
    \MFP@tempc=\MFP@tempb
    \divide  \MFP@tempc #1\relax
    \advance \MFP@tempa \MFP@tempc
    \multiply\MFP@tempc #1\relax
    \advance \MFP@tempb -\MFP@tempc}%
%    \end{macrocode}
%
% This adds \arg1 to \arg2, the result goes into macro \arg3. This does no
% checking. It is basicly used to add with macros instead of registers.
%    \begin{macrocode}
\def\MFP@addone#1#2#3{%
  \begingroup
    \MFP@tempa#1%
    \advance\MFP@tempa#2\relax
  \MFP@endgroup@after{%
    \MFP@afterdef#3{\number\MFP@tempa}%
  }}%
%    \end{macrocode}
%
% Multiply \arg1 by \cs{MFP@tempb} and add to \arg2. \cs{MFP@tempb} is one digit
% (base=10000) of $y$ in multiplying $x\times y$, \arg1 (usually a macro)
% holds one digit of $x$. \arg2 is a macro that will hold one digit of the
% final product $z$. The product is added to it (overflow is taken care of
% later by the carry routines).
%    \begin{macrocode}
\def\MFP@multiplyone#1#2{%
  \MFP@tempa#1%
  \multiply\MFP@tempa\MFP@tempb
  \advance\MFP@tempa#2%
  \edef#2{\number\MFP@tempa}}%
%    \end{macrocode}
%
% This does the above multiplication-addition for all four ``digits'' of
% $x$. This is where \cs{MFP@tempb} is initialized for \cs{MFP@multiplyone}. The
% first argument represents a digit of $y$, the remaining four arguments
% are macros representing the digits of $z$ that are involved in
% multiplying the digits of $x$ by \arg1.
%    \begin{macrocode}
\def\MFP@multiplyfour#1#2#3#4#5{%
  \MFP@tempb #1\relax
  \MFP@multiplyone\MFP@x@Int@ii #2%
  \MFP@multiplyone\MFP@x@Int@i  #3%
  \MFP@multiplyone\MFP@x@Frc@i  #4%
  \MFP@multiplyone\MFP@x@Frc@ii #5}%
%    \end{macrocode}
%
% Now we begin the internal implementations of the binary operations. All
% four expect macros \cs{MFP@x@Sgn}, \cs{MFP@x@Int}, \cs{MFP@x@Frc}, \cs{MFP@y@Sgn},
% \cs{MFP@y@Int} and \cs{MFP@y@Frc} to be the normalized parts of two real numbers
% $x$ and $y$.
%
% \cs{MFP@Rsub} just changes the sign of $y$ and then calls \cs{MFP@Radd}.
%
% \cs{MFP@Radd} checks whether $x$ and $y$ have same or different signs. In
% the first case we need only add absolute values and the sign of the
% result will match that of the operands. In the second case, finding the
% sign of the result is a little more involve (and ``borrowing'' may be
% needed).
%    \begin{macrocode}
\def\MFP@Rsub{\edef\MFP@y@Sgn{\number-\MFP@y@Sgn}\MFP@Radd}%
\def\MFP@Radd{%
  \MFP@tempa\MFP@x@Sgn
  \multiply\MFP@tempa\MFP@y@Sgn\relax
  \ifcase\MFP@tempa
    \ifnum \MFP@x@Sgn=0
      \MFP@Rcopy yz%
    \else
      \MFP@Rcopy xz%
    \fi
  \or
    \@xp\MFP@Radd@same
  \else
    \@xp\MFP@Radd@diff
  \fi}%
%    \end{macrocode}
%
% \cs{MFP@Radd@same} adds two numbers which have the same sign. The sign
% of the result is the common sign. The fractional and integer parts are
% added separately, then a carry is invoked. The overflow (\cs{MFP@z@Ovr})
% could be only a single digit 0 or 1.
%    \begin{macrocode}
\def\MFP@Radd@same{%
  \MFP@addone\MFP@x@Frc\MFP@y@Frc\MFP@z@Frc
  \MFP@addone\MFP@x@Int\MFP@y@Int\MFP@z@Int
  \MFP@carrya\MFP@z@Frc\MFP@z@Int
  \MFP@carrya\MFP@z@Int\MFP@z@Ovr
  \makeMFP@eightdigits\MFP@z@Frc
  \edef\MFP@z@Sgn{\MFP@x@Sgn}}%
%    \end{macrocode}
%
% We are now adding two numbers with opposite sign. Since $x\ne 0$ this
% is the same as $\sgn(x)(|x| - |y|)$ . So we subtract absolute values,
% save the result in \cs{MFP@z@Sgn}, \cs{MFP@z@Int} and \cs{MFP@z@Frc}
% (with the last two nonnegative, as usual), then change the sign of
% \cs{MFP@z@Sgn} if \cs{MFP@x@Sgn} is negative. Since the difference
% between numbers in $[0,10^8)$ has absolute value in that range, there is
% no carrying. However, there may be borrowing.
%    \begin{macrocode}
\def\MFP@Radd@diff{%
  \MFP@addone\MFP@x@Frc{-\MFP@y@Frc}\MFP@z@Frc
  \MFP@addone\MFP@x@Int{-\MFP@y@Int}\MFP@z@Int
%    \end{macrocode}
%
% Now we need to establish the sign and arrange the borrow. The sign of
% the result is the sign of \cs{MFP@z@Int} unless it is 0; in that case
% it, is the sign of \cs{MFP@z@Frc}. There must be a simpler coding,
% though.
%    \begin{macrocode}
  \MFP@tempa=\MFP@z@Int
  \MFP@tempb=\MFP@z@Frc\relax
  \ifnum\MFP@tempa=0 \else \MFP@tempa=\MFP@Sign\MFP@tempa 1 \fi
  \ifnum\MFP@tempb=0 \else \MFP@tempb=\MFP@Sign\MFP@tempb 1 \fi
  \ifnum\MFP@tempa=0 \MFP@tempa=\MFP@tempb \fi
%    \end{macrocode}
%
% Now we have the sign of $|x| - |y|$ in \cs{MFP@tempa}, and we multiply
% that sign by the sign of $x$ to get \cs{MFP@z@Sgn}. Then we multiply the
% current value of $z$ by that sign to get the absolute value, stored in
% \cs{MFP@tempa} and \cs{MFP@tempb}.
%    \begin{macrocode}
  \edef\MFP@z@Sgn{\number\MFP@x@Sign\MFP@tempa}%
  \MFP@tempb\MFP@tempa
  \multiply\MFP@tempa \MFP@z@Int
  \multiply\MFP@tempb \MFP@z@Frc\relax
%    \end{macrocode}
%
% What we should have now is a positive number which might still be
% represented with a negative fractional part. A human being performing
% the subtraction would have borrowed first. Being a computer, we do it
% last, and we're done.
%    \begin{macrocode}
  \ifnum\MFP@tempb<0
    \advance\MFP@tempb\MFP@ttteight
    \advance\MFP@tempa-1
  \fi
  \edef\MFP@z@Int{\number\MFP@tempa}%
  \edef\MFP@z@Frc{\number\MFP@tempb}%
  \makeMFP@eightdigits\MFP@z@Frc}%
%    \end{macrocode}
%
% \cs{MFP@Rmul} first computes the (theoretical) sign of the product: if
% it is zero, return zero, otherwise provisionally set the sign of the product
% and call \cs{MFP@@Rmul}.
%    \begin{macrocode}
\def\MFP@Rmul{%
  \ifnum\MFP@x@Sgn=0 \MFP@Rzero
  \else\ifnum\MFP@y@Sgn=0 \MFP@Rzero
  \else \edef\MFP@z@Sgn{\number\MFP@x@Sign\MFP@y@Sgn}%
    \@XP\MFP@@Rmul
  \fi\fi}%
%    \end{macrocode}
%
% \cs{MFP@@Rmul} first initializes the macros that will hold the
% base-10000 digits of $z$. Then it splits the four expected macros into
% eight macros that hold the base-10000 digits for each of $x$ and $y$.
% Then each digit of $y$ is used to multiply the four digits of $x$ and the
% results are added to corresponding digits of $z$.
%    \begin{macrocode}
\def\MFP@@Rmul{%
  \def\MFP@z@Frc@iv {0}\def\MFP@z@Frc@iii{0}%
  \def\MFP@z@Frc@ii {0}\def\MFP@z@Frc@i  {0}%
  \def\MFP@z@Int@i  {0}\def\MFP@z@Int@ii {0}%
  \def\MFP@z@Int@iii{0}%
  \MFP@@split
  \MFP@multiplyfour \MFP@y@Frc@ii \MFP@z@Frc@i
    \MFP@z@Frc@ii \MFP@z@Frc@iii \MFP@z@Frc@iv
  \MFP@multiplyfour \MFP@y@Frc@i  \MFP@z@Int@i
    \MFP@z@Frc@i  \MFP@z@Frc@ii  \MFP@z@Frc@iii
  \MFP@multiplyfour \MFP@y@Int@i  \MFP@z@Int@ii
    \MFP@z@Int@i  \MFP@z@Frc@i   \MFP@z@Frc@ii
  \MFP@multiplyfour \MFP@y@Int@ii \MFP@z@Int@iii
    \MFP@z@Int@ii \MFP@z@Int@i   \MFP@z@Frc@i
%    \end{macrocode}
% Now apply the carry routines on the underflow digits\dots
%    \begin{macrocode}
  \MFP@carrym\MFP@z@Frc@iv\MFP@z@Frc@iii
  \MFP@carrym\MFP@z@Frc@iii\MFP@z@Frc@ii
%    \end{macrocode}
% \dots and pause to round the lowest digit that will be kept\dots
%    \begin{macrocode}
  \ifnum\MFP@z@Frc@iii<5000 \else
    \MFP@tempb\MFP@z@Frc@ii
    \advance\MFP@tempb1
    \edef\MFP@z@Frc@ii{\number\MFP@tempb}%
  \fi
%    \end{macrocode}
% \dots and continue carrying.
%    \begin{macrocode}
  \MFP@carrym\MFP@z@Frc@ii\MFP@z@Frc@i
  \MFP@carrym\MFP@z@Frc@i \MFP@z@Int@i
  \MFP@carrym\MFP@z@Int@i \MFP@z@Int@ii
  \MFP@carrym\MFP@z@Int@ii\MFP@z@Int@iii
%    \end{macrocode}
% To end, we arrange for all macros to hold four digits (except
% \cs{MFP@z@Int@ii} and \cs{MFP@z@Int@iii} which don't need leading 0s)
% and load them into the appropriate 8-digit macros. The underflow digits
% are stored in \cs{MFP@z@Und} in case we ever need to examine them (we
% now do: in our unit conversion routine \cs{MFP@DPmul}), and the overflow
% in \cs{MFP@z@Ovr} in case we ever want to implement an overflow error.
% Theoretically $z \ne 0$, but it is possible that $z=0$ after reducing to
% eight places. If so, we must reset \cs{MFP@z@Sgn}.
%    \begin{macrocode}
  \makeMFP@fourdigits\MFP@z@Frc@iv
  \makeMFP@fourdigits\MFP@z@Frc@iii
  \makeMFP@fourdigits\MFP@z@Frc@ii
  \makeMFP@fourdigits\MFP@z@Frc@i
  \makeMFP@fourdigits\MFP@z@Int@i
  \edef\MFP@z@Int{\number\MFP@z@Int@ii\MFP@z@Int@i}%
  \edef\MFP@z@Frc{\MFP@z@Frc@i\MFP@z@Frc@ii}%
  \edef\MFP@z@Ovr{\number\MFP@z@Int@iii}%
  \edef\MFP@z@Und{\MFP@z@Frc@iii\MFP@z@Frc@iv}%
  \ifnum\MFP@z@Int>0
  \else\ifnum\MFP@z@Frc>0
  \else \def\MFP@z@Sgn{0}%
  \fi\fi}%
%    \end{macrocode}
%
% For division, we will obtain the result one digit at a time until the
% $9$th digit after the decimal is found. That $9$th will be used to round
% to eight digits (and stored as underflow). We normalize the denominator
% by shifting left until the integer part is eight digits. We do the same for
% the numerator. The integer quotient of the integer parts will be one digit
% (possibly a 0). If the denominator is shifted $d$ digits left and the
% numerator $n$ digits left, the quotient will have to be shifted $n-d$
% places right or $d-n$ places left. Since the result is supposed to have
% $9$ digits after the dot, our quotient needs $9+d-n+1$ total digits.
% Since $d$ can be as high as $15$ and $n$ as low as $0$, we could need
% $25$ repetitions. However, that extreme would put $15$ or $16$ digits in
% the integer part, a $7$ or $8$ digit overflow. (It can be argued that
% only $16$ significant digits should be retained in any case.) If $d$ is
% $0$ and $n$ is $15$ we would need $-5$ digits. That means the first
% nonzero digit is in the 15th or 16th place after the dot and the
% quotient is effectively zero.
%
% Here I explain why we normalize the parts in this way. If a numerator
% has the form $n_1.n_2$ and the denominator has the form $d_1.d_2$ then
% \TeX{} can easily obtain the integer part of $n_1/d_1$, because these
% are within its range for integers. The resulting quotient (let's call it
% $q_1$) is the largest integer satisfying $q_1d_1 \le n_1$. What we seek,
% however is the largest integer $q$ such that $q(d_1.d_2) \le n_1.n_2$.
% It can easily be shown that $q \le q_1$. It is true, but not so easily
% shown, that $q \ge q_1 - 1$. This is only true if $d_1$ is large enough,
% in our case it has to be at least five digits. Thus we only have to do one
% simple division and decide if we need to reduce the quotient by one. If
% we arrange for $d_1$ to have eight digits, then $q_1$ will be one digit and
% the test for whether we need to reduce it becomes easier.
%
% This test is done as follows. The first trial quotient, $q_1$, will work
% if
% \[
%     q_1 d_1 (10)^8 + q_1 d_2 \le n_1 (10)^8 + n_2
% \]
% This means
% \begin{equation}\label{crucial}
%     0 \le (n_1 - q_1 d_1) (10)^8 + n_2 - q_1 d_2 .
% \end{equation}
% Since $d_2$ is no more than eight digits, $q_1 d_2$ is less than $9
% (10)^8$. Inequality (\ref{crucial}) is therefore satisfied if $n_1 - q_1
% d_1 \ge 9$. If that is not the case then the right side of
% (\ref{crucial}) is computable within \TeX's integer ranges and we can
% easily test the inequality. If the inequality holds, then $q = q_1$,
% otherwise $q = q_1 - 1$.
%
% Note also that when $q = q_1$, then both terms in (\ref{crucial})
% (ignoring the $10^8$ factor) will be needed to calculate the remainder.
% If $q = q_1 - 1$, we simply add $d_1$ and $d_2$ to the respective parts.
% Thus we will save these values for that use.
%
% Now I need to get it organized. \cs{MFP@Rdiv} will have \cs{MFP@x@*} and
% \cs{MFP@y@*} available. One step (could be first or last). Is to calculate
% the sign. Let's do it first (because we need to check for zero anyway).
%
% We invoke an error message upon division by zero, but nevertheless return
% a value. By default it is $0$ for $0/0$ and the maximum possible real
% for $x/0$ when $x$ is not zero. If the numerator is zero and the
% denominator not, we could do nothing as $z$ was initialized to be zero.
% However, we play it safe by explicitly setting $z$ to zero.
%
% If neither is zero, we calculate the sign of the result and call
% \cs{MFP@@Rdiv} to divide the absolute values.
%    \begin{macrocode}
\def\MFP@Rdiv{%
  \ifnum\MFP@y@Sgn=0 \MFP@dividebyzero@err
    \ifnum\MFP@x@Sgn=0
      \edef\MFP@z@Int{\ZeroOverZeroInt}%
      \edef\MFP@z@Frc{\ZeroOverZeroFrac}%
    \else
      \edef\MFP@z@Int{\xOverZeroInt}%
      \edef\MFP@z@Frc{\xOverZeroFrac}%
    \fi
    \edef\MFP@z@Sgn{\MFP@x@Sgn}%
  \else\ifnum\MFP@x@Sgn=0 \MFP@Rzero
  \else \edef\MFP@z@Sgn{\number\MFP@x@Sign\MFP@y@Sgn}\MFP@@Rdiv
  \fi\fi}%
%    \end{macrocode}
%
% Now we have two positive values to divide. Our first step is to shift
% the denominator ($y$) left and keep track of how many places. We store
% the shift in \cs{MFP@tempa}. This actually changes the value of $y$,
% but knowing the shift will give us the correct quotient in the end.
%
% We first arrange that \cs{MFP@y@Int} is nonzero by making it \cs{MFP@y@Frc} if
% it is zero (a shift of eight digits). Then the macro
% \cs{MFP@numdigits@toshift} computes $8$ minus the number of digits in
% \cs{MFP@y@Int}, which is how many positions left $y$ will be shifted.
% We then call \cs{MFP@doshift@y} on the concatenation of the digits in
% the integer and fractional parts (padded with zeros to ensure there are
% at least 16). All this macro does is read the first eight digits into
% \cs{MFP@y@Int} and the next eight into \cs{MFP@y@Frc}.
%    \begin{macrocode}
\def\MFP@@Rdiv{%
  \ifnum\MFP@y@Int=0
    \edef\MFP@y@Int{\number\MFP@y@Frc}%
    \def\MFP@y@Frc{00000000}%
    \MFP@tempa=8
  \else
    \MFP@tempa=0
  \fi
  \advance\MFP@tempa\MFP@numdigits@toshift\MFP@y@Int\relax
  \@XP\MFP@doshift@y\@xp\MFP@y@Int\MFP@y@Frc0000000\MFP@end
%    \end{macrocode}
%
% We repeat all that on the numerator $x$, except shifting its digits
% left means the final outcome will need a corresponding \emph{right}
% shift. We record that fact by reducing \cs{MFP@tempa}, which ends up
% holding the net shift necesary.
%
% This has the advantage that we know the result will be in the range
% $[0.1, 10)$. It also means we can reduce the number of places we will
% need to shift left as well as reduce the number of iterations of the
% loop that calculates the digits.
%    \begin{macrocode}
  \ifnum\MFP@x@Int=0
    \edef\MFP@x@Int{\number\MFP@x@Frc}%
    \def\MFP@x@Frc{00000000}%
    \advance\MFP@tempa -8
  \fi
  \advance\MFP@tempa-\MFP@numdigits@toshift\MFP@x@Int\relax
  \@XP\MFP@doshift@x\@xp\MFP@x@Int\MFP@x@Frc0000000\MFP@end
%    \end{macrocode}
%
% Since our result will have at most one digit in the integer part, a
% rightward shift of $10$ places will make every digit $0$ including the
% rounding digit, so we return $0$.
%    \begin{macrocode}
  \ifnum\MFP@tempa<-9
    \MFP@Rzero
  \else
%    \end{macrocode}
%
% Now we perform the division, which is a loop repeated $10 +
% {}$\cs{MFP@tempa} times. Therefore, we add 10 to \cs{MFP@tempa} in
% \cs{MFP@tempf}, our loop counter. We also initialize the macro that
% will store the digits and then, after the division, shift and split it
% into parts.
%    \begin{macrocode}
    \MFP@tempf\MFP@tempa
    \advance\MFP@tempf 10
    \def\MFP@z@digits{}%
    \MFP@Rdivloop
    \MFPshiftandsplit@z@digits
%    \end{macrocode}
%
% The last remaining step is to round and carry and get the fractional
% part in the appropriate 8-digit form..
%    \begin{macrocode}
    \ifnum\MFP@z@Und>4
      \MFP@addone\MFP@z@Frc1\MFP@z@Frc
      \MFP@carrya\MFP@z@Frc\MFP@z@Int
      \MFP@carrya\MFP@z@Int\MFP@z@Ovr
      \makeMFP@eightdigits\MFP@z@Frc
    \fi
  \fi}%
%    \end{macrocode}
%
% If \arg1 of \cs{MFP@numdigits@toshift}, has $n$ digits then
% \cs{MFP@numdigits@toshift} picks out the value $8-n$. \cs{MFP@doshift@x}
% reads the first eight digits into \cs{MFP@x@Int} and then pulls out eight more
% from the rest (\arg9) inside \cs{MFP@x@Frc}. The same with
% \cs{MFP@doshift@y}.
%    \begin{macrocode}
\def\MFP@numdigits@toshift#1{\@xp\MFP@ninthofmany#101234567\MFP@end}%
\def\MFP@doshift@x#1#2#3#4#5#6#7#8#9\MFP@end{%
  \def\MFP@x@Int{#1#2#3#4#5#6#7#8}%
  \edef\MFP@x@Frc{\MFP@eightofmany#9\MFP@end}}%
\def\MFP@doshift@y#1#2#3#4#5#6#7#8#9\MFP@end{%
  \def \MFP@y@Int{#1#2#3#4#5#6#7#8}%
  \edef\MFP@y@Frc{\MFP@eightofmany#9\MFP@end}}%
%    \end{macrocode}
%
% The loop counter is \cs{MFP@tempf}, \cs{MFP@tempa} is reserved for the
% shift required later, the quotient digit will be \cs{MFP@tempb}. The
% remainder will be calculated in \cs{MFP@tempc} and \cs{MFP@tempd}.
% \cs{MFP@tempe} will hold the value whose size determines whether the
% quotient needs to be reduced.
%    \begin{macrocode}
\def\MFP@Rdivloop{%
  \MFP@tempb\MFP@x@Int                    % \MFP@tempb = n_1
  \MFP@tempc\MFP@y@Int                    % \MFP@tempc = d_1
  \divide\MFP@tempb \MFP@tempc        % \MFP@tempb = n_1/d_1 = q_1
  \multiply \MFP@tempc \MFP@tempb     % \MFP@tempc = q_1 d_1
  \MFP@tempd \MFP@y@Frc                   % \MFP@tempd = d_2
  \multiply \MFP@tempd \MFP@tempb     % \MFP@tempd = q_1 d_2
  \MFP@tempe \MFP@tempc
  \advance \MFP@tempe -\MFP@x@Int\relax   % \MFP@tempe = -n_1 + q_1 d_1
  \ifnum \MFP@tempe > -9              % n_1 - q_1 d_1 < 9
    \multiply \MFP@tempe\MFP@ttteight    % -(n_1 - q_1 d_1)(10)^8
    \advance \MFP@tempe \MFP@tempd       % add q_1 d_2
    \advance \MFP@tempe -\MFP@x@Frc\relax % add -n_2
    \ifnum \MFP@tempe>0               % Crucial inequality fails
      \advance\MFP@tempb -1           % new q = q_1 - 1
      \advance\MFP@tempc -\MFP@y@Int      % q_1 d_1 - d_1 = q d_1
      \advance\MFP@tempd -\MFP@y@Frc\relax% q_1 d_2 - d_2 = q d_2
    \fi
  \fi
  \edef\MFP@z@digits{\MFP@z@digits\number\MFP@tempb}%
%    \end{macrocode}
%
% It remains to:
% \begin{itemize}
%   \item Do the carry from \cs{MFP@tempd} to \cs{MFP@tempc}. Then
%         \cs{MFP@tempc.}\cs{MFP@tempd} will represent $q\cdot y$.
%   \item Subtract them from \cs{MFP@x@Int} and \cs{MFP@x@Frc} (i.e. remainder =
%         $x - qy$).
%   \item Borrow, if needed, and we will have the remainder in
%         \cs{MFP@x@Int.}\cs{MFP@x@Frc}.
% \end{itemize}
% Then we decrement the loop counter, and decide whether to repeat this
% loop. If so, we need to shift the remainder right one digit (multiply
% by 10). We don't use \cs{MFP@carrya} since it requires macros; its
% internal code, \cs{MFP@carryi} just leaves the results in
% \cs{MFP@tempa.}\cs{MFP@tempb}.
%    \begin{macrocode}
  \begingroup
    \MFP@carryi\MFP@ttteight\MFP@tempd\MFP@tempc
  \MFP@endgroup@after{%
    \MFP@tempc=\number\MFP@tempa
    \MFP@tempd=\number\MFP@tempb\relax
  }%
% subtract
  \MFP@addone\MFP@x@Int{-\MFP@tempc}\MFP@x@Int
  \MFP@addone\MFP@x@Frc{-\MFP@tempd}\MFP@x@Frc
% borrow
  \ifnum\MFP@x@Frc<0
    \MFP@addone\MFP@x@Frc\MFP@ttteight\MFP@x@Frc
    \MFP@addone\MFP@x@Int{-1}\MFP@x@Int
  \fi
  \advance\MFP@tempf -1
  \ifnum\MFP@tempf>0
    \edef\MFP@x@Int{\MFP@x@Int0}%
    \edef\MFP@x@Frc{\MFP@x@Frc0}%
    \MFP@carrya\MFP@x@Frc\MFP@x@Int
    \@xp\MFP@Rdivloop
  \fi}%
%    \end{macrocode}
%
% Now \cs{MFPshiftandsplit@z@digits}. At this point, the digits of the
% quotient are stored in \cs{MFP@z@digits}. We need to shift the decimal
% \cs{MFP@tempa} places left, and perform the rounding. There are
% \cs{MFP@tempa}${}+10$ digits. This could be as little as $1$ or as great
% as $25$. In the first case \cs{MFP@tempa} is $-9$, and this (rightward)
% shift produces $0$ plus a rounding digit. In the latter case \cs{MFP@tempa}
% is $15$, and the shift produces $8$ digits overflow, an $8$-digit
% integer part, an $8$-digit fractional part and a rounding digit. In the
% example $0123456$, \cs{MFP@tempa}${}+10$ is $7$, so \cs{MFP@tempa} is $-3$.
% The shift produces $0.0001\,2345\,6$. The rounding digit ($6$) makes the
% answer $0.0001\,2346$.
%
% We take two cases:
% \begin{itemize}
%   \item \cs{MFP@tempa}${}\le 7$, prepend $7-{}$\cs{MFP@tempa} zeros. The first
%         $8$ digits will become the integer part, and there should be
%         exactly $9$ more digits.
%   \item \cs{MFP@tempa}${} > 7$, pluck \cs{MFP@tempa}${}-7$ digits for
%         overflow, the next $8$ for integer part, leaving $9$ more digits
% \end{itemize}
% In either case, the $9$ last digits will be processed into a fractional
% part (with possible carry if the rounding increases it to $10^8$).
%
% After this, we will return to \cs{MFP@Rdiv} so overwriting \cs{MFP@temp*}
% won't cause any problems.
%    \begin{macrocode}
\def\MFPshiftandsplit@z@digits{%
    \advance \MFP@tempa -7
    \ifnum\MFP@tempa>0
      \def\MFP@z@Ovr{}%
      \@xp\MFPget@Ovrdigits\MFP@z@digits\MFP@end
    \else
      \ifnum\MFP@tempa<-7
        \edef\MFP@z@digits{00000000\MFP@z@digits}%
        \advance\MFP@tempa8
      \fi
      \ifnum\MFP@tempa<-3
        \edef\MFP@z@digits{0000\MFP@z@digits}%
        \advance\MFP@tempa4
      \fi
      \edef\MFP@z@digits{%
        \ifcase-\MFP@tempa\or
          0\or
          00\or
          000\or
          0000\else
          00000%
        \fi \MFP@z@digits}%
      \@xp\MFPget@Intdigits\MFP@z@digits\MFP@end
    \fi}%
%    \end{macrocode}
%
% The macro \cs{MFPget@Ovrdigits} is a loop that loads the first \cs{MFP@tempa}
% digits of what follows into \cs{MFP@z@Ovr}. It does this one digit (\arg1)
% at a time. Once the counter reaches $0$, we call the macro that
% processes the integer part digits.
%    \begin{macrocode}
\def\MFPget@Ovrdigits#1{%
  \edef\MFP@z@Ovr{\MFP@z@Ovr#1}%
  \advance\MFP@tempa -1
  \ifnum\MFP@tempa>0
    \@xp\MFPget@Ovrdigits
  \else
    \@xp\MFPget@Intdigits
  \fi}%
%    \end{macrocode}
%
% The macro \cs{MFPget@Intdigits} should have exactly 17 digits following it.
% It puts eight of them in \cs{MFP@z@Int}, then calls \cs{MFPget@Frcdigits} to
% read the fractional part. That requires exactly nine digits follow it,
% putting eight in \cs{MFP@z@Frc} and the last in \cs{MFP@z@Und}. Still, to
% allow a graceful exit should there be more, we gobble the rest of the
% digits.
%    \begin{macrocode}
\def\MFPget@Intdigits#1#2#3#4#5#6#7#8{%
  \def\MFP@z@Int{\number#1#2#3#4#5#6#7#8}%
  \MFPget@Frcdigits}%
\def\MFPget@Frcdigits#1#2#3#4#5#6#7#8#9{%
  \def\MFP@z@Frc{#1#2#3#4#5#6#7#8}%
  \def\MFP@z@Und{#9}\gobbleto@MFP@end}%
%    \end{macrocode}
%
% The max amd min operations simply run the compare operation and use
% and use the resultant booleans to copy $x$ or $y$ to $z$.
%    \begin{macrocode}
\def\MFP@Rmax{%
  \MFP@Rcmp \ifMFP@neg \MFP@Rcopy yz\else\MFP@Rcopy xz\fi}%
\def\MFP@Rmin{%
  \MFP@Rcmp \ifMFP@pos \MFP@Rcopy yz\else\MFP@Rcopy xz\fi}%
%    \end{macrocode}
%
% \subsection{Commands to format for printing}
%
% \DescribeMacro{\MFPtruncate}
% This first runs the parsing command so the fractional part has exactly
% eight digits. These become the arguments of \cs{MFP@@Rtrunc}, which just
% keeps the right number. For negative truncations we prepend zeros to the
% integer part so it too is exactly eight digits. These become the
% arguments of \cs{MFP@@iRtrunc}, which substitutes 0 for the last
% \texttt{-}\cs{MFP@tempa} of them.
%
% The macro to store the result in follows \arg2. It is read and
% defined by either \cs{MFP@Rtrunc} or \cs{MFP@iRtrunc}.
%    \begin{macrocode}
\def\MFPtruncate#1#2{%
  \begingroup
    \MFP@tempa#1\relax
    \MFPparse@x{#2}%
    \ifnum\MFP@tempa<1
      \@xp\MFP@iRtrunc
    \else
      \@xp\MFP@Rtrunc
    \fi}%
\def\MFP@Rtrunc#1{%
    \edef\MFP@x@Frc{\@xp\MFP@@Rtrunc\MFP@x@Frc\MFP@end}%
    \ifnum\MFP@x@Int=0
      \ifnum\MFP@x@Frc=0
        \def\MFP@x@Sgn{0}%
      \fi
    \fi
  \MFP@endgroup@after{%
    \MFP@afterdef#1{\MFP@x@Sign\MFP@x@Int.\MFP@x@Frc}}}%
\def\MFP@@Rtrunc#1#2#3#4#5#6#7#8#9\MFP@end{%
  \ifcase\MFP@tempa\or
    #1\or
    #1#2\or
    #1#2#3\or
    #1#2#3#4\or
    #1#2#3#4#5\or
    #1#2#3#4#5#6\or
    #1#2#3#4#5#6#7\else
    #1#2#3#4#5#6#7#8\fi}%
\def\MFP@iRtrunc#1{%
  \makeMFP@eightdigits\MFP@x@Int
  \edef\MFP@x@Val{\number\MFP@x@Sign\@xp\MFP@@iRtrunc\MFP@x@Int\MFP@end}%
  \MFP@endgroup@after{\MFP@afterdef#1{\MFP@x@Val}}}%
\def\MFP@@iRtrunc#1#2#3#4#5#6#7#8#9\MFP@end{%
  \ifcase-\MFP@tempa
    #1#2#3#4#5#6#7#8\or
    #1#2#3#4#5#6#70\or
    #1#2#3#4#5#600\or
    #1#2#3#4#5000\or
    #1#2#3#40000\or
    #1#2#300000\or
    #1#2000000\or
    #10000000\else
    00000000\fi}%
%    \end{macrocode}
%
% \DescribeMacro{\MFPround}
% For rounding we simply add the appropriate fraction and truncate.
% The macro in which to store the result will follow \arg2, and be
% picked up by the \cs{MFPtruncate} command.
%    \begin{macrocode}
\def\MFPround#1#2{%
  \begingroup
    \MFP@tempa#1\relax
    \ifnum 0>\MFP@tempa
      \edef\MFP@y@Tmp{%
        \ifcase-\MFP@tempa\or
          5\or
          50\or
          500\or
          5000\or
          50000\or
          500000\or
          5000000\else
          50000000\fi
      }%
    \else
      \edef\MFP@y@Tmp{%
        \ifcase\MFP@tempa
          .5\or
          .05\or
          .005\or
          .0005\or
          .00005\or
          .000005\or
          .0000005\or
          .00000005\else
        0\fi
      }%
    \fi
    \MFPchk{#2}\ifMFP@neg\edef\MFP@y@Tmp{-\MFP@y@Tmp}\fi
    \MFPadd{#2}\MFP@y@Tmp\MFP@z@Tmp
  \MFP@endgroup@after{\MFP@afterdef\MFP@z@Tmp{\MFP@z@Tmp}}%
  \MFPtruncate{#1}\MFP@z@Tmp}%
%    \end{macrocode}
%
% \DescribeMacro{\MFPstrip}
% Stripping zeros from the right end of the fractional part. The star form
% differs only in the handling of a zero fractional part. So we check
% whether it is zero and when it is, we either append `\texttt{.0}' or
% nothing. The rest of the code grabs a digit at a time and stops when the
% rest are zero.
%    \begin{macrocode}
\def\MFPstrip{%
  \@ifstar{\MFP@strip{}}{\MFP@strip{.0}}}%
\def\MFP@strip#1#2#3{%
  \MFPparse@x{#2}%
  \ifnum \MFP@x@Frc=0
    \edef#3{\MFP@x@Sign\MFP@x@Int#1}%
  \else
    \edef#3{\MFP@x@Sign\MFP@x@Int.\@xp\MFP@@strip\MFP@x@Frc\MFP@end}%
  \fi}%
\def\MFP@@strip#1#2\MFP@end{%
  #1%
  \ifnum 0#2>0
    \@xp\MFP@@strip
  \else
    \@xp\gobbleto@MFP@end
  \fi#2\MFP@end}%
%    \end{macrocode}
%
% \subsection{Miscellaneous}
%
% Here is the code that allows definitions to survive after
% \cs{stopMFPprogram}. The \cs{Global} variants are easiest.
%    \begin{macrocode}
\def\MFP@Global#1{\toks@\@xp{#1}\xdef#1{\the\toks@}}%
\def\MFP@GlobalStack{\MFP@Global\MFP@Rstack}%
%    \end{macrocode}
%
% The \cs{Export} command adds the command and its definition to a macro
% that is executed after the closing group of the program.
%    \begin{macrocode}
\def\MFP@Export#1{%
  \begingroup
    \toks@\@xp{\MFPprogram@returns}%
  \MFP@endgroup@after{%
    \MFP@afterdef\MFPprogram@returns{\the\toks@ \MFP@afterdef#1{#1}}%
  }}%
\def\MFP@ExportStack{\MFP@Export\MFP@Rstack}%
%    \end{macrocode}
%
% The various operations \cs{MFP@R...} together make up a ``microcode'' in
% terms of which the stack language and the operand language are both
% defined. As a language in its own right, it lacks only convenient ways
% to move numbers around, as well as a few extra registers for saving
% intermediate results. In this language, numbers are represented by a
% three part data structure, consisting of a signum, an integer part and a
% fractional part.
%
% Here we define extra commands to remedy this lack, starting with a way
% to load a number (or rather, a three part data structure representing a
% number) directly into a register. Here \arg1 is a register name (we
% always us a single letter) and the remaining arguments are the signum,
% the integer part and the fractional part (automatically normalized to 8
% digits). The ``register'' is just a set of three macros created from the
% name given.
%
% We make loading a number into a register a little more general than
% strictly needed, allowing the parts to be specified as anything \TeX{}
% recognizes as a number and allowing any register name. This generality
% might reduce efficiency but it simplifies code. Because register
% \reg{z} is by far the most common one to load, we make more efficient
% version of it.
%    \begin{macrocode}
\def\MFP@Rload #1#2#3#4{%
  \@xp\edef\csname MFP@#1@Sgn\endcsname{\number#2}%
  \@xp\edef\csname MFP@#1@Int\endcsname{\number#3}%
  \@xp\edef\csname MFP@#1@Frc\endcsname{\number#4}%
  \@xp\makeMFP@eightdigits\csname MFP@#1@Frc\endcsname}%
\def\MFP@Rcopy#1#2{%
  \MFP@Rload #2{\csname MFP@#1@Sgn\endcsname}%
               {\csname MFP@#1@Int\endcsname}%
               {\csname MFP@#1@Frc\endcsname}}%
\def\MFP@Rloadz#1#2#3{%
  \edef\MFP@z@Sgn{\number#1}%
  \edef\MFP@z@Int{\number#2}%
  \edef\MFP@z@Frc{\number#3}%
  \makeMFP@eightdigits\MFP@z@Frc}%
%    \end{macrocode}
%
% \DescribeMacro{\MFPpi}
% These are some miscellaneous constants. The 8-digit approximation to
% $\pi$, is \cs{MFPpi} and the constant mathematicians call $e$ is
% \DescribeMacro{\MFPe}
% \cs{MFPe}. Finally, the golden ratio (often called $\phi$) is obtained
% by
% \DescribeMacro{\MFPphi}
% \cs{MFPphi}.
%    \begin{macrocode}
\def\MFPpi{3.14159265}%
\def\MFPe{2.71828183}%
\def\MFPphi{1.61803399}%
%    \end{macrocode}
% Load (conditionally) \file{mfpextra.tex}.
%    \begin{macrocode}
\MFP@loadextra
\MFP@finish
%</sty>
%    \end{macrocode}
%
% \section{Extras}\label{extras}
%
% The extras consist so far of sine, cosine, angle, logarithm, powers,
% square root, and random number. For completeness, here is the table of
% user-level commands available.
%
% \medskip
% \centerline{%
% \begin{tabular}{lp{3in}}
% \textit{Operand versions}&\\[3pt]
% \hline\hline
%   \textbf{Command}&\textbf{operation}\\
% \hline
%   \SpecialUsageIndex{\MFPsin}^^A
%   \cs{MFPsin}\mmarg{num}\cs{macro}&
%     Stores $\sin(\meta{num})$ in \cs{macro}, where \meta{num} is an
%       angle in degrees.\\
%   \SpecialUsageIndex{\MFPcos}^^A
%   \cs{MFPcos}\mmarg{num}\cs{macro}&
%     Stores $\cos(\meta{num})$ in \cs{macro}, where \meta{num} is an
%       angle in degrees.\\
%   \SpecialUsageIndex{\MFPangle}^^A
%   \cs{MFPangle}\mmarg{$x$}\mmarg{$y$}\cs{macro}&
%     Stores in \cs{macro} the polar angle coordinate $\theta$ of the point
%       $(x,y)$, where $-180<\theta\le 180$.\\
%   \SpecialUsageIndex{\MFPrad}^^A
%   \cs{MFPrad}\mmarg{num}\cs{macro}&
%     The angle \meta{num} in degrees is converted to radians,
%       and result is stored in \cs{macro}.\\
%   \SpecialUsageIndex{\MFPdeg}^^A
%   \cs{MFPdeg}\mmarg{num}\cs{macro}&
%     The angle \meta{num} in radians is converted to degrees,
%       and result is stored in \cs{macro}.\\
%   \SpecialUsageIndex{\MFPlog}^^A
%   \cs{MFPlog}\mmarg{num}\cs{macro}&
%     Stores $\log(\meta{num})$ in \cs{macro} (base 10 logarithm).\\
%   \SpecialUsageIndex{\MFPln}^^A
%   \cs{MFPln}\mmarg{num}\cs{macro}&
%     Stores $\ln(\meta{num})$ in \cs{macro} (natural logarithm).\\
%   \SpecialUsageIndex{\MFPexp}^^A
%   \cs{MFPexp}\mmarg{num}\cs{macro}&
%     Stores $\exp(\meta{num})$ (i.e., $e^x$) in \cs{macro}.\\
%   \SpecialUsageIndex{\MFPsqrt}^^A
%   \cs{MFPsqrt}\mmarg{num}\cs{macro}&
%     Stores the square root of \meta{num} in \cs{macro}.\\
%   \SpecialUsageIndex{\MFPrand}^^A
%   \cs{MFPrand}\mmarg{num}\cs{macro}&
%     Stores a random real number between $0$ amd \meta{num} in
%     \cs{macro}. If \meta{num} is negative, so is the result.\\
%   \SpecialUsageIndex{\MFPpow}^^A
%   \cs{MFPpow}\mmarg{num}\mmarg{int}\cs{macro}&
%     Stores the \meta{int} power of \meta{num} in \cs{macro}. The
%     second operand must be an integer (positive or negative).
% \end{tabular}}
%
% In addition, there is \SpecialUsageIndex{\MFPsetseed}\cs{MFPsetseed} for
% setting the internal random number seed. It takes one argument, the seed
% value, which must be an integer greater than or equal to $1$ and less
% than or equal to $2^{31}-2 = 2\,147\,483\,646$. If the seed is set to
% zero or a negative number then the first use of the random number
% generator will replace it with a seed value based on the current time
% and date. The randum number seed is a global value.
%
% There are actually three random number generators and they can be
% selected with the commands
% \SpecialUsageIndex{\MFPrandgenA}\cs{MFPrandgenA},
% \SpecialUsageIndex{\MFPrandgenB}\cs{MFPrandgenB}, or
% \SpecialUsageIndex{\MFPrandgenC}\cs{MFPrandgenC}. The first uses the
% code and multiplier value from the well-known macro file
% \file{random.tex}. It is the default. The other two use different
% multipliers which are alleged to have better statistical behavior. If
% any of these commands is used inside a group, that generator is in force
% during that group only.
%
% \bigskip
% \centerline{%
% \begin{tabular}{lp{3.9in}}
%   \textit{Stack versions}&\\[3pt]
% \hline\hline
%   \textbf{Command}&\textbf{operation}\\
% \hline
%   \SpecialUsageIndex{\Rsin}\cs{Rsin}&
%     The number is interpreted as degrees, and its sine is computed.\\
%   \SpecialUsageIndex{\Rcos}\cs{Rcos}&
%     The number is interpreted as degrees, and its cosine is computed.\\
%   \SpecialUsageIndex{\Rangle}\cs{Rangle}&
%     The top two numbers are interpreted as coordinates of a point $P$
%     in the order they were pushed. The polar angle coordinate $\theta$
%       of $P$, with $-180 < \theta \le 180$ is computed.\\
%   \SpecialUsageIndex{\Rrad}\cs{Rrad}&
%     The number of degrees is converted to radians.\\
%   \SpecialUsageIndex{\Rdeg}\cs{Rdeg}&
%     The number of radians is converted to degrees.\\
%   \SpecialUsageIndex{\Rlog}\cs{Rlog}&
%     Computes the base-10 logarithm.\\
%   \SpecialUsageIndex{\Rln}\cs{Rln}&
%     Computes the natural logarithm.\\
%   \SpecialUsageIndex{\Rexp}\cs{Rexp}&
%     Computes the exponential of the number (i.e., $e^x$).\\
%   \SpecialUsageIndex{\Rsqrt}\cs{Rsqrt}&
%     Computes the square root of the number.\\
%   \SpecialUsageIndex{\Rrand}\cs{Rrand}&
%     Returns a random real number between $0$ and the number, keeping the
%     sign.\\
%   \SpecialUsageIndex{\Rpow}\cs{Rpow}&
%     Computes $x^y$. The last number pushed ($y$) must be an
%     integer.
% \end{tabular}}
%
% \bigskip
% The user could easily convert between radians and degrees using
% multiplication and/or division. One could similarly convert between
% natural logarithms and base ten logarithms.  The commands \cs{Rdeg},
% \cs{Rrad}, \cs{Rlog} and \cs{Rln} (and their \cs{MFP...} counterparts)
% aim for more accurate results.
%
% \subsection{Loading the extras}
%
% \DescribeMacro{\Rsin}\DescribeMacro{\Rcos}
% \DescribeMacro{\Rangle}
% \DescribeMacro{\Rrad}\DescribeMacro{\Rdeg}
% \DescribeMacro{\Rlog}\DescribeMacro{\Rln}
% \DescribeMacro{\Rexp}\DescribeMacro{\Rsqrt}
% \DescribeMacro{\Rrand}\DescribeMacro{\Rpow}
% We start \file{mfpextra} with the hook \cs{MFP@Rextra} that
% \cs{startMFPprogram} will call to make available the extra operations
% defined here. If \file{minifp.sty} has been loaded, this macro is
% \cs{@empty}, otherwise it should be undefined. If it is undefined we
% load \file{minifp.sty}. If it is then not \cs{@empty} we assume
% \file{mfpextra.tex} was previously loaded and end input here.
%    \begin{macrocode}
%<*extra>
% check if mfpextra already loaded:
\expandafter\ifx\csname MFP@xfinish\endcsname\relax
\else \expandafter\endinput\fi
\expandafter\edef\csname MFP@xfinish\endcsname{%
  \catcode64=\the\catcode64 \space
  \catcode46=\the\catcode46 \space
  \catcode60=\the\catcode60 \space
  \catcode62=\the\catcode62 \space}%
\catcode64=11 % @
\catcode46=12 % . (period)
\catcode60=12 % <
\catcode62=12 % >
\ifx\MFP@Rextra\UndEfInEd \input minifp.sty \fi
\ifx\MFP@Rextra\@empty
\else
  \immediate\write16{mfpextra.tex: already loaded.^^J}%
  \MFP@xfinish
  \expandafter\endinput
\fi
\immediate\write16{%
    mfpextra.tex: extra operations for the MiniFP package.^^J}%
\def\MFP@Rextra{%
  \def\Rcos  {\MFP@stack@Unary\MFP@Rcos }%
  \def\Rsin  {\MFP@stack@Unary\MFP@Rsin }%
  \def\Rangle{\MFP@stack@Binary\MFP@Rangle}%
  \def\Rrad  {\MFP@stack@Unary\MFP@Rrad }%
  \def\Rdeg  {\MFP@stack@Unary\MFP@Rdeg }%
  \def\Rlog  {\MFP@stack@Unary\MFP@Rlog }%
  \def\Rln   {\MFP@stack@Unary\MFP@Rln  }%
  \def\Rexp  {\MFP@stack@Unary\MFP@Rexp }%
  \def\Rsqrt {\MFP@stack@Unary\MFP@Rsqrt}%
  \def\Rrand {\MFP@stack@Unary\MFP@Rrand}%
  \def\Rpow  {\MFP@stack@Binary\MFP@Rpow}}%
%    \end{macrocode}
%
% \DescribeMacro{\MFPsin}\DescribeMacro{\MFPcos}
% \DescribeMacro{\MFPrad}\DescribeMacro{\MFPdeg}
% \DescribeMacro{\MFPlog}\DescribeMacro{\MFPln}
% \DescribeMacro{\MFPexp}\DescribeMacro{\MFPsqrt}
% \DescribeMacro{\MFPrand}\DescribeMacro{\MFPpow}
% Then the wrappers for the operand versions.
%    \begin{macrocode}
\def\MFPcos   {\MFP@op@Unary\MFP@Rcos }%
\def\MFPsin   {\MFP@op@Unary\MFP@Rsin }%
\def\MFPangle {\MFP@op@Binary\MFP@Rangle}%
\def\MFPrad   {\MFP@op@Unary\MFP@Rrad }%
\def\MFPdeg   {\MFP@op@Unary\MFP@Rdeg }%
\def\MFPlog   {\MFP@op@Unary\MFP@Rlog }%
\def\MFPln    {\MFP@op@Unary\MFP@Rln  }%
\def\MFPexp   {\MFP@op@Unary\MFP@Rexp }%
\def\MFPsqrt  {\MFP@op@Unary\MFP@Rsqrt}%
\def\MFPrand  {\MFP@op@Unary\MFP@Rrand}%
\def\MFPpow   {\MFP@op@Binary\MFP@Rpow}%
%    \end{macrocode}
%
% \subsection{Error messages}
%
% These extra commands come with a few possible new warnings and errors.
%
% \DescribeMacro{\LogOfZeroInt}
% \DescribeMacro{\LogOfZeroFrac}
% Trying to take the logarithm of zero will result in an error message.
% If one allows \TeX{} to continue, the returned value will be negative,
% with an integer part whose absolute value is equal to the contents of
% \cs{LogOfZeroInt} and a fractional part equal to the contents of
% \cs{LogOfZeroFrac}. The defaults are both $99999999$.
%
% Trying to take the logarithm of a negative number will produce the
% warning
% \begin{verbatim}
%   MFP warning: Log of a negative number is complex.
%                Only the real part will be computed. \end{verbatim}
% The log of the absolute value is returned.
%
% Trying to take the square root of a negative number has similar
% behavior. It produces a warning and returns $0$.
%
% \SpecialUsageIndex{\MaxRealInt}
% \SpecialUsageIndex{\MaxRealFrac}
% Trying to take the exponential of a number larger than about $18.42$
% will cause an error and the number returned has integer part
% $99999999$ and fractional part $99999999$.
%
% Trying to take a negative power of $0$ produces an error and returns
% the same value as trying to divide $1$ by $0$.
%
% Messages for errors related to impossible powers and logarithms.
%    \begin{macrocode}
\def\MFP@logofzero@err{%
  \MFP@errmsg{logarithm of zero}%
    {You tried to take the logarithm of zero. What were you %
     thinking? If you ^^Jcontinue, the value %
     assigned will be -\LogOfZeroInt.\LogOfZeroFrac.}}%
\def\LogOfZeroInt {\MaxRealInt}%
\def\LogOfZeroFrac{\MaxRealFrac}%
\def\MFP@expoverflow@err{%
  \MFP@errmsg{Power too large}%
    {The power you tried to calculate is too large for %
     8 digits. If you continue, ^^Jthe value assigned will be %
     \MaxRealInt.\MaxRealFrac.}}%
\def\MFP@badpower@err{%
  \MFP@errmsg{negative power of zero}%
    {You tried to take a negative power of zero. What were you
     thinking? If you ^^Jcontinue, the value assigned will be %
     \xOverZeroInt.\xOverZeroFrac.}}%
%    \end{macrocode}
%
% A debugging utility, \cs{MFPshowreg} displays the contents of a
% register.
%    \begin{macrocode}
\def\MFPshowreg #1{%
\ifMFPdebug
\begingroup
  \edef\theregister{%
    #1 =  \expandafter \MFP@Sign
          \csname MFP@#1@Sgn\endcsname %
          \csname MFP@#1@Int\endcsname.%
          \csname MFP@#1@Frc\endcsname}%
  \show\theregister
\endgroup
\fi}%
%    \end{macrocode}
%
% \subsection{Sine and Cosine}
%
% For iterated code, the most common register to copy is $z$ and
% the most common place to copy it is to $x$ or $y$ so we
% make single commands to do those.
%    \begin{macrocode}
\def\MFP@Rcopyz#1{\MFP@Rload {#1}\MFP@z@Sgn\MFP@z@Int\MFP@z@Frc}%
\def\MFP@Rcopyzx{\MFP@Rcopyz x}%
\def\MFP@Rcopyzy{\MFP@Rcopyz y}%
%    \end{macrocode}
%
% Our code assumes the number $x$ is an angle in degrees. To get sine and
% cosine of numbers as radians, simply convert your radians to degrees
% using \cs{MFPdeg} or \cs{Rdeg}. Then find the sine or cosine of the
% result. For example, if \cs{X} holds the angle in in radians and you
% want the result to be stored in \cs{S}:
% \begin{verbatim}
%   \MFPdeg\X\Y \MFPsin\Y\S \end{verbatim}
%
% For unit conversions such as radian to degree we try to be more accurate
% than a multiplication by an eight-digit conversion factor allows.
% If $x$ is large and the factor is off by $0.5\times 10^{-8}$, then the
% result can be significantly off. But if we are able to give the
% conversion factor 16 digits precision, then only the imprecision of $x$
% will significantly affect the result.
%
% We express the conversion factor as an integer part and two eight-digit
% fractional parts. We multiply $x$ by the integer and first fractional
% part (\arg1 and \arg2) with a normal \cs{MFP@Rmul}, but we save the
% underflow digits and undo the rounding that occured at the 8th digit.
% Together these give us an essentially exact result. Then we multiply $x$
% by the second fractional part (\arg3) and add the saved underflow to the
% result. Finally, we round and add the result to the first product.
% Argument \arg3, as well as the underflow digits, represent numbers less
% than $10^{-8}$, so we effectively scale them up by $10^8$, round the
% result to an integer and scale that back down.
%
% The registers $w$ and $v$ are used to save intermediate results.
% The ``\texttt{DP}'' in \cs{MFP@DPmul} refers to the fact that we are
% multiplying by a ``double precision'' real. The conversion factors are
% required to be positive.
%    \begin{macrocode}
\def\MFP@DPmul#1#2#3{%
  \ifnum\MFP@x@Sgn=0
    \MFP@Rzero
  \else
    \MFP@Rcopy xv%
    \MFP@Rload y1{#1}{#2}\MFP@Rmul
    \edef\MFP@w@Und{\MFP@z@Und}%
    \ifnum\MFP@z@Frc@iii>4999
      \MFP@tempa\MFP@z@Frc \advance\MFP@tempa-1
      \edef\MFP@z@Frc{\number\MFP@tempa}%
      \makeMFP@eightdigits\MFP@z@Frc
    \fi
    \MFP@Rcopyz w%
    \MFP@Rcopy vx\MFP@Rload y10{#3}\MFP@Rmul
    \MFP@Rcopyzx\MFP@Rload y\MFP@v@Sgn 0{\MFP@w@Und}\MFP@Radd
    \MFP@tempa\MFP@z@Int\relax
    \ifnum\MFP@z@Frc<50000000 \else \advance\MFP@tempa 1 \fi
    \ifnum\MFP@tempa<\MFP@ttteight\relax
      \MFP@Rload x{\ifnum\MFP@tempa>0 \MFP@z@Sgn\else0\fi}0\MFP@tempa
    \else
      \MFP@Rload x\MFP@z@Sgn10%
    \fi
    \MFP@Rcopy wy\MFP@Radd
  \fi}%
%    \end{macrocode}
%
% Conversion factors:
% \begin{itemize}
%   \item radians to degrees: $57.2957795130823209$
%   \item degrees to radians: $0.0174532925199433$
%   \item natural log to common log: $0.4342944819032518$
%   \item common log to natural log: $2.3025850929940457$
% \end{itemize}
%
% Note that the comparatively large size of the first number means that
% the $\pm0.5\cdot10^{-8}$ imprecision that $x$ implicitly carries will
% be multiplied to approximately $\pm29.6\cdot 10^{-8}$ in the result.
% The only way around this would be to operate with higher precision
% internally. We do that in the code for computing angles.
%    \begin{macrocode}
\def\MFP@Rdeg{\MFP@DPmul{57}{29577951}{30823209}}%
\def\MFP@Rrad{\MFP@DPmul{0}{01745329}{25199433}}%
\def\MFP@RbaseX{\MFP@DPmul{0}{43429448}{19032518}}%
\def\MFP@RbaseE{\MFP@DPmul{2}{30258509}{29940457}}%
%    \end{macrocode}
%
% There are very few angles that are expressible in eight digits whose sine
% or cosine can be expressed exactly in eight digits. For these, we do obtain
% an exact result. Other values produce inexact results. It would be nice
% if we could at least obtain these correctly rounded to eight decimals, but
% unfortunately our methods will often produce a result off by $1$ in the
% eighth decimal from the correctly rounded value. Anything that
% involves the addition of two or more rounded results can have this
% problem. The only way to get correctly rounded results is to carry out
% all operations internally to additional places. Even then, there will be
% the occasional $.4999\dots$ that should round to $0$ but rounds to $1$
% instead.
%
% For the cosine, just compute $\sin(90-x)$.
%    \begin{macrocode}
\def\MFP@Rcos{%
  \MFP@Rcopy xy\MFP@Rload x1{90}0\MFP@Rsub
  \MFP@Rcopyzx\MFP@Rsin}%
%    \end{macrocode}
%
% Reduce $|x|$ by subtracting $180$ from the integer part until it is less
% than $180$. Of course, $\sin x = \sgn(x)\sin(|x|)$ so we only need to
% compute $\sin(|x|)$. The sign will be that of $x$; each reduction by
% $180$ changes the sign, but the reduction code keeps track of that. If
% $x$ is 0 after the reduction, return zero.
%    \begin{macrocode}
\def\MFP@Rsin{%
  \MFP@tempa\MFP@x@Int
  \MFP@tempb\MFP@x@Frc
  \MFP@tempc\MFP@x@Sgn\relax
  \MFP@reduce@angle
  \ifnum\MFP@tempa>0  \MFP@@Rsin
  \else\ifnum\MFP@tempb>0  \MFP@@Rsin
  \else  \MFP@Rzero
  \fi\fi}%
%    \end{macrocode}
%
% This following reduces $|x|$ to the case $0 \le |x| < 180$. It assumes
% the integer part is in count register \cs{MFP@tempa}, the sign in
% \cs{MFP@tempc}.
%    \begin{macrocode}
\def\MFP@reduce@angle{%
  \ifnum\MFP@tempa<180
  \else
    \advance\MFP@tempa-180
    \MFP@tempc-\MFP@tempc
    \@xp\MFP@reduce@angle
  \fi}%
%    \end{macrocode}
%
% At this point, $|x|$ is represented by \cs{MFP@tempa} (integer part) and
% \cs{MFP@tempb} (fractional part). Also, we already know the sign stored
% in \cs{MFP@tempc}. Moreover $0 < {}$\cs{MFP@tempa}${} < 180$. We now
% reduce to $0 < |x| \le 90$ using $\sin(x) = \sin(180-|x|)$, and return
% $1$ if equal to $90$.
%
% The calculation of $180-x$ is optimized, taking advantage of the fact
% that both $x$ and the result are known to be positive. If the fractional
% part is positive, we borrow $1$ by reducing $180$ to $179$.
%    \begin{macrocode}
\def\MFP@@Rsin{%
  \ifnum\MFP@tempa<90
  \else
    \MFP@tempa -\MFP@tempa
    \ifnum\MFP@tempb>0
      \MFP@tempb -\MFP@tempb
      \advance\MFP@tempb \MFP@ttteight\relax
      \advance\MFP@tempa 179
    \else  \advance\MFP@tempa 180
    \fi
  \fi
  \ifnum\MFP@tempa=90
    \MFP@Rloadz \MFP@tempc10%
  \else
%    \end{macrocode}
%
% We would need to convert $x$ to radians (multiply by $\pi/180$) to use
% the standard power series, but instead we will incorporate the
% conversion factor into the power series coefficients.
%
% We will, however, try to increase accuracy by reducing the size of $x$
% and correspondingly increasing the appropriate factors. Since the
% number of significant figures of a product is limited by the least
% number of significant figures of the two factors, the bottleneck on
% accuracy is that of the smaller term: all our numbers have eight digits
% so if a number is small, the number of nonzero digits is small.
%
% Dividing by 100 seems a good choice (so our units are
% ``hectodegrees''). This makes $0 < x < .9$ and the integer part
% (\cs{MFP@tempa}) will be henceforth ignored.
%
% The addition of 50 is for rounding purposes. After that, our
% computations amount to concatenating the top six digits of
% \cs{MFP@tempb} to the digits of \cs{MFP@tempa}. This will produce the
% integer form of the fractional part of $x/100$ (the integer part of
% $x/100$ is zero).
%
% Division by $100$ can turn a number into $0$. This is one place we can
% lose accuracy (up to $\pm1$ in the last digit of the result). In
% compensation, the rest of the calculations become very much more
% accurate.
%    \begin{macrocode}
    \advance\MFP@tempb 50 \divide\MFP@tempb 100
    \multiply\MFP@tempa 1000000 \advance\MFP@tempb\MFP@tempa
    \ifnum\MFP@tempb=0
      \MFP@Rzero
    \else
%    \end{macrocode}
%
% We save some multiplications by working with $t=x^2$. As we don't need
% the original $x$ anymore, we simply replace it with the newly reduced
% value. We also save this reduced $x$ in another register, $s$, as
% we will need it again at the end, and our intermediate calculations do
% not preserve the $x$ register. Then we square $x$ and, if that
% square is $0$ we can skip all the power series and simply return $x$
% converted to radians. If $x^2$ is not zero, we save it in temporary
% register $t$ and call our power series. When this program is
% finished, all that remains is the final multiplication by a conversion
% factor (\cs{MFP@DPmul}).
%    \begin{macrocode}
      \MFP@Rload s\MFP@tempc0\MFP@tempb
      \MFP@Rcopy sx%
      \MFP@Rsq
      \ifnum \MFP@z@Frc>0
        \MFP@Rcopyz t\MFP@Rsin@prog
      \else
        \MFP@Rcopy sx%
      \fi
      \MFP@DPmul 1{74532925}{19943296}%
    \fi
  \fi}%
%    \end{macrocode}
%
% \cs{MFP@Rsin@prog} is the power series computation. The power series
% need only go to the $x^{13}$ term as the next is less than $10^{-9}$ and
% in our 8-place computations is indistingushable from $0$. Our series is:
% $$
% rx(1 - r^2t/3! + r^4t^2/5! - r^6t^3/7! + r^8t^4/9! - r^{10}t^5/11! +
%  r^{12}t^6/13!)
% $$
% where $r$ is the factor that converts $x$ to radian measure
% (hectodegrees to radians). When $x$ is so small as to produce $t = 0$ we
% have skipped all this.
%
% We minimize any multiplications of tiny numbers by computing this as
% $$
%   rx(1 - ft(1 - et(1 - dt(1 - ct(1 - bt(1 - at)))))).
% $$
% In this format, additional terms might actually make a difference,
% because $at$ is not particularly small. However, the more computations
% we have, the more errors accumulate. Therefore we take the fewest that
% produce acceptable accuracy.
%
% Now $r = 1.7453292519943296$ and $a$, $b$, etc., have formulas:
% $$
% \vcenter{\centering
%  $\displaystyle a = r^2/13/12,\ b = r^2/11/10,\ c = r^2/9/8$,\\
%  $\displaystyle d = r^2/7/6,\ e = r^2/5/4,\ f = r^2/3/2$.\par
% }
% $$
% An alternative method would be to accumulate a sum, computing each term
% from the previous one (e.g., if $u = t^3/7!$ is the fourth term, the next
% one is $u*t*(1/(8*9))$). This is a bit more complicated to code and requires
% moving values around more. It would have the advantage that we can stop
% whenever a term evaluates to zero, making computation faster for small
% values of $x$. I have not determined whether it would compromise
% accuracy.
%
% We avoid divisions by precomputing the coefficients $a$, $b$, $c$, etc.
% Note that without the reduction in $x$, the value of $a$ for example
% would  be $0.00000195$, with only three significant figures of accuracy.
% Now we can have seven, and the accuracy is more-or-less determined by that
% of the reduced x.
% $$
% \vcenter{\centering
%   $\displaystyle a = 0.01952676,\ b = 0.02769249,\ c = 0.04230797,$,\\
%   $\displaystyle d = 0.07252796,\ e = 0.15230871,\ f = 0.50769570$.\par
% }
% $$
% It is important to note that the following operations step all over
% the \cs{MFP@temp}\textit{x} \cs{count} registers, so we have made sure
% that we no longer need them.
%
% The \cs{MFP@flipz} computes $1-z$, where $z$ is the result of the
% previous operation. Instead of simply subtracting, we optimize based
% on the fact that $z$ is known to be nonnegative and not larger than $1$.
%
% The macro \cs{MFP@com@iter} `flipz' the previous result then multiplies
% by $t$ and the indicated coefficient. (The name of this macro stands for
% ``common iterated'' code; it is reused for some other power series.)
%
% For extra efficiency, the power series uses a ``small'' version of
% multiplication \cs{MFP@Rsmul}, used only when the factors are sure to
% lie in $[0,1]$. This does not take into account the sign of $x$,
% whence the ending \cs{edef}.
%    \begin{macrocode}
\def\MFP@Rsin@prog{%
  \MFP@Rcopy tx\MFP@Rload y10{01952676}\MFP@Rsmul%
  \MFP@com@iter{02769249}\MFP@com@iter{04230797}\MFP@com@iter{07252796}%
  \MFP@com@iter{15230871}\MFP@com@iter{50769570}\MFP@flipz \MFP@Rcopyzx
  \MFP@Rcopy sy\MFP@Rsmul\MFP@Rcopyzx\edef\MFP@x@Sgn{\MFP@s@Sgn}}%
\def\MFP@flipz{%
  \ifnum\MFP@z@Sgn=0
    \MFP@Rloadz 110%
  \else
      \MFP@tempa\MFP@ttteight
      \advance\MFP@tempa-\MFP@z@Frc\relax
      \MFP@Rloadz{\ifcase\MFP@tempa 0\else1\fi}0\MFP@tempa
  \fi}%
\def\MFP@com@iter#1{\MFP@flipz
  \MFP@Rcopyzx\MFP@Rcopy ty\MFP@Rsmul
  \MFP@Rcopyzx\MFP@Rload y10{#1}\MFP@Rsmul}%
%    \end{macrocode}
%
% As to the accuracy of these computations, we can certainly lose accuracy
% at each step. In principle, if $x$ is known to 10 significant figures
% ($x \ge 10$~degrees), then even though we lose two figures with division
% by 100, the accuracy bottleneck is the fact that our coefficients have
% only seven figures.  Now we have 17 multiplications, and while products
% are said to have the same number of significant figures as the factors,
% in the worse case we can accumulate inaccuracy of about $.5\times
% 10^{-8}$ per multiplication. So we are not guaranteed an accuracy of
% more than about $\pm 10^{-7}$. Numerical tests, however, show that it
% isn't that bad, probably because the direction of inaccuracies usually
% varies randomly, and inaccuracies in one direction compensate for those
% going the other way. I have not seen a case where the result is off by
% more than $1$ in the last decimal place (i.e., $\pm 1.5\times 10^{-8}$).
% In the case where we can know the result exactly, $x=30$, we get an
% exact answer, even though we don't single it out (as we do $0$, $90$ and
% $180$).
%
% The following is the ``small'' version of \cs{MFP@Rmul}. Limited to
% non-negative numbers less than or equal to $1$. Theoretically all the
% numbers are strictly between $0$ and $1$, but in practice a
% multiplication could round to $0$ and then, after subtraction, a $1$
% could occur. We handle those easy cases separately, so that in
% \cs{MFP@@Rsmul} we don't have to worry about the integer parts at all.
%
% Also, since these are completely internal, we don't even define the
% overflow and underflow macros.
%    \begin{macrocode}
\def\MFP@Rsmul{%
  \ifnum \MFP@x@Sgn=0 \MFP@Rzero
  \else\ifnum \MFP@y@Sgn=0 \MFP@Rzero
  \else\ifnum\MFP@x@Int>0 \MFP@Rcopy yz%
  \else\ifnum\MFP@y@Int>0 \MFP@Rcopy xz%
  \else \MFP@@Rsmul
  \fi\fi\fi\fi}%
\def\MFP@@Rsmul{%
  \MFP@split\MFP@x@Frc\MFP@x@Frc@i\MFP@x@Frc@ii
  \MFP@split\MFP@y@Frc\MFP@y@Frc@i\MFP@y@Frc@ii
  \def\MFP@z@Frc@i  {0}\def\MFP@z@Frc@ii {0}%
  \def\MFP@z@Frc@iii{0}\def\MFP@z@Frc@iv {0}%
  \MFP@tempb\MFP@y@Frc@ii\relax
  \MFP@multiplyone\MFP@x@Frc@ii\MFP@z@Frc@iv
  \MFP@multiplyone\MFP@x@Frc@i\MFP@z@Frc@iii
  \MFP@tempb\MFP@y@Frc@i\relax
  \MFP@multiplyone\MFP@x@Frc@ii\MFP@z@Frc@iii
  \MFP@multiplyone\MFP@x@Frc@i\MFP@z@Frc@ii
  \MFP@carrym\MFP@z@Frc@iv\MFP@z@Frc@iii
  \MFP@carrym\MFP@z@Frc@iii\MFP@z@Frc@ii
  \ifnum\MFP@z@Frc@iii<5000 \else
    \MFP@tempb\MFP@z@Frc@ii
    \advance\MFP@tempb1
    \edef\MFP@z@Frc@ii{\number\MFP@tempb}\fi
  \MFP@carrym\MFP@z@Frc@ii\MFP@z@Frc@i
  \makeMFP@fourdigits\MFP@z@Frc@ii
  \makeMFP@fourdigits\MFP@z@Frc@i
  \def\MFP@z@Int{0}%
  \edef\MFP@z@Frc{\MFP@z@Frc@i\MFP@z@Frc@ii}%
  \edef\MFP@z@Sgn{\ifnum\MFP@z@Frc=0 0\else 1\fi}}%
%    \end{macrocode}
%
% \subsection{Polar angle}
%
% Instead of supplying the arcsine and arccosine functions, we supply the
% more general angle function. This is a binary operation that accepts
% the two coordinates of a point and computes its angle in polar
% coordinates. One then has, for example, $\arctan x =
% \mathop{\mathrm{angle}}(1,x)$ and $\arccos x = \mathop{\mathrm{angle}}
% (x, \sqrt{1-x^2})$.
%
% We start, as usual, with a few reductions. When the $y$-part is $0$, we
% immediately return $0$ or $180$. If the $y$-part is negative, we compute
% the angle for $(x,|y|)$ and negate it. If the $x$-part is negative, we
% compute the angle for $|x|$ and subtract it from $180$. Finally,
% reduced to both coordinates positive, if $y>x$ we compute the angle of
% $(y,x)$ and subtract that from $90$. Ultimately, we apply a power
% series formula for $\mathop{\mathrm{angle}}(1,y/x)$ and get convergence
% when the argument is less than $1$, but convergence is poor unless the
% argument is less than $1/2$. When that is not the case, conceptually, we
% rotate the picture clockwise by the arctangent of $1/2$, compute the
% angle of the new point and then add a precomputed value of
% $\arctan(1/2)$.
%    \begin{macrocode}
\def\MFP@Rangle{%
  \ifcase\MFP@y@Sgn\relax
    \ifcase\MFP@x@Sgn\relax
      \MFP@warn{Point (0,0) has no angle. Returning 0 anyway}%
      \MFP@Rzero
    \or
      \MFP@Rzero
    \else
      \MFP@Rloadz 1{180}0%
    \fi
    \@xp\@gobble
  \or
    \def\MFP@angle@Sgn{1}\@xp\@firstofone
  \else
    \def\MFP@y@Sgn{1}%
    \def\MFP@angle@Sgn{-1}\@xp\@firstofone
  \fi
 {\ifcase\MFP@x@Sgn\relax
    \MFP@Rloadz1{90}0%
  \or  \MFP@@Rangle
  \else
    \def\MFP@x@Sgn{1}\MFP@@Rangle
    \MFP@Rcopyzy\MFP@Rload x1{180}0\MFP@Rsub
  \fi
  \let\MFP@z@Sgn\MFP@angle@Sgn}}%
\def\MFP@@Rangle{%
  \MFP@Rcmp
  \ifMFP@neg
    \MFP@Rcopy xw\MFP@Rcopy yx\MFP@Rcopy wy%
    \MFP@@@Rangle
    \MFP@Rload x1{90}0\MFP@Rcopyzy\MFP@Rsub
  \else
    \MFP@@@Rangle
  \fi}%
%    \end{macrocode}
%
% Precisely what we do when we are finally in the case $0<y<x$ is perform
% a couple of reductions. Ultimately we want to compute the arctan of
% $z = y/x$. We once again use a power series but, for fast convergence,
% we require $z$ to be considerably less than $1$. For reasons we discuss
% later, we won't be able to use the more efficient \cs{MFP@Rsmul} so we
% want to keep the number of iterations of our power series calculations
% low.
%
% So we start with two iterations of the algorithm used by Knuth: if $y/x
% > 1/2$ we transform the pair $(x,y)$ to a new one whose angle has been
% reduced by $\arctan (1/2)$. The new pair is $(x',y') = (2x+y, 2y-x)$.
% If we still have $y/x > 1/4$, we perform $(x'',y'') = (4x + y, 4y - x)$,
% which then satisfies $y''/x'' \le 1/4$. When either of these
% transformations is performed, we add the corresponding angle to the
% ``angle-so-far'' in register $a$.
%
% We could continue this iteration 32 times to get (theoretically) the
% angle in degrees to $\pm 10^{-8}$. That seems a bit long, plus the
% accumulation of errors over $32$ iterations could (in the worst case)
% produce less than $\pm10^{-7}$ accuracy.
%
% To get the accuracy we need, we work in ``scaled reals''. That is, we
% get 10 effective decimal places of accuracy by letting an $x$ in the
% range $0< x < 100$ stand for $0< x/100 < 1$.
%
% Our initial reductions can increase $x$ by a factor of about 13.
% Moreover, we ultimately need to scale y by 100 when we convert to
% scaled computations. Thus, if we make sure $x$ is less than
% $1\,000\,000$, we will prevent overflow in both cases.
%    \begin{macrocode}
\def\MFP@Rquad{\MFP@Rdbl\MFP@Rcopyzx\MFP@Rdbl}%
\def\MFP@@@Rangle{%
  \MFP@Rcopy xs\MFP@Rcopy yt%
  \ifnum\MFP@x@Int<1000000
  \else
    \MFP@RdivC \MFP@Rcopyz s%
    \MFP@Rcopy tx\MFP@RdivC \MFP@Rcopyz t%
  \fi
  \ifnum\MFP@t@Sgn=0 \MFP@Rzero
  \else
    \MFP@Rcopy tx\MFP@Rdbl\MFP@Rcopyzx\MFP@Rcopy sy\MFP@Rcmp
    \ifMFP@pos
      \MFP@Rsub\MFP@Rcopyz u\MFP@Rcopy sx\MFP@Rdbl
      \MFP@Rcopyzx\MFP@Rcopy ty\MFP@Radd
      \MFP@Rcopyz s\MFP@Rcopy ut%
      \MFP@Rload a1{2656}{50511771}%
    \else
      \MFP@Rload a000%
    \fi
    \MFP@Rcopy tx\MFP@Rquad\MFP@Rcopyzx\MFP@Rcopy sy\MFP@Rcmp
    \ifMFP@pos
      \MFP@Rsub\MFP@Rcopyz u\MFP@Rcopy sx\MFP@Rquad
      \MFP@Rcopyzx\MFP@Rcopy ty\MFP@Radd
      \MFP@Rcopyz s\MFP@Rcopy ut%
      \MFP@Rcopy ax\MFP@Rload y1{1403}{62434679}%
      \MFP@Radd\MFP@Rcopy za%
    \fi
    \MFP@Rcopy tx\MFP@RmulC
    \MFP@Rcopyzx\MFP@Rcopy sy\MFP@Rdiv
    \MFP@Rcopyzx\MFP@Ratanc
    \MFP@Rcopyzx\MFP@Rdeg
    \MFP@Rcopyzx\MFP@Rcopy ay\MFP@Radd
    \MFP@Rcopyzx\MFP@RdivC
  \fi}%
%    \end{macrocode}
%
% Here are fast multiplication and division by 100. We need these because
% we are going to compute the arctangent in radians to ten decimal places.
% We do this by computing with scaled reals in which, for example, $0.5$
% is represented by $50.0$. When we do this, multiplication requires a
% division by 100: $.5\times.5 = .25$ would be computed as $(50\times50) /
% 100 = 25$.
%    \begin{macrocode}
\def\MFP@twoofmany#1#2#3\MFP@end{#1#2}%
\def\MFP@gobbletwo#1#2{}%
\def\MFP@RmulC{%
  \edef\MFP@z@Int{\MFP@x@Int\@xp\MFP@twoofmany\MFP@x@Frc\MFP@end}%
  \edef\MFP@z@Frc{\@xp\MFP@gobbletwo\MFP@x@Frc00}%
  \edef\MFP@z@Sgn{\MFP@x@Sgn}}%
\def\MFP@RdivC{%
  \makeMFP@eightdigits\MFP@x@Int
  \makeMFP@eightdigits\MFP@x@Frc
  \@XP\MFP@@RdivC\@xp\MFP@x@Int\MFP@x@Frc\MFP@end}%
\def\MFP@@RdivC#1#2#3#4#5#6{%
  \edef\MFP@z@Int{\number#1#2#3#4#5#6}%
  \MFP@@@RdivC}%
\def\MFP@@@RdivC#1#2#3#4#5#6#7#8#9\MFP@end{%
  \MFP@tempa#1#2#3#4#5#6#7#8\relax
  \ifnum#9>49 \advance\MFP@tempa1 \fi
  \edef\MFP@z@Frc{\number\MFP@tempa}%
  \makeMFP@eightdigits\MFP@z@Frc
  \edef\MFP@z@Sgn{\MFP@x@Sgn}%
  \ifnum\MFP@tempa=0
    \ifnum\MFP@z@Int=0 \def\MFP@z@Sgn{0}\fi
  \fi}%
%    \end{macrocode}
%
% Finally, we compute the arctan of a scaled real producing a result
% as a scaled number (i..e., as ``centiradians''---$100$ times the number
% of radians) using a power series. Since that number could be
% around $0.25$ (represented by $25.0$), we have to sum to at least its
% $15$th power ($4^{-15}/15 \approx .6\times 10^{-10}$ and the next term
% in the series is effectively $0$). Fortunately, the power series has
% only odd terms, so there are only eight terms we actually need to calculate.
% The calculation proceeds much like the one for the sine, starting with
% the sum
% $$
%   x\left(1 - \frac{u}{3} + \frac{u^2}{5} - \frac{u^3}{7} + \cdots
%   - \frac{u^7}{15}\right),
% $$
% where $u = x^2$.
%
% We start with the common iterated code. It assumes a scaled value in $x$
% to be multiplied by the saved (scaled) value of $x^2$ (in register $u$)
% and by a coefficient (supplied in separate integer and fractional
% parts). It ends with the new value in $x$.
%    \begin{macrocode}
\def\MFP@scaledmul{\MFP@Rmul\MFP@Rcopyzx\MFP@RdivC}%
\def\MFP@atan@iter#1#2{%
  \MFP@Rcopy uy\MFP@scaledmul
  \MFP@Rcopyzx\MFP@Rload y1{#1}{#2}\MFP@scaledmul
  \MFP@Rcopyzy\MFP@Rload x1{100}{00000000}%
  \MFP@Rsub\MFP@Rcopyzx}%
\def\MFP@Ratanc{%
  \MFP@Rcopy xs\MFP@Rcopy xy\MFP@scaledmul
  \ifnum \MFP@z@Sgn=0
    \MFP@Rcopy sz%
  \else
    \MFP@Rcopyz u\MFP@Rcopyzx
    \MFP@Rload y1{86}{66666667}\MFP@scaledmul
    \MFP@Rcopyzy\MFP@Rload x1{100}{00000000}\MFP@Rsub\MFP@Rcopyzx
    \MFP@atan@iter{84}{61538462}\MFP@atan@iter{81}{81818182}%
    \MFP@atan@iter{77}{77777778}\MFP@atan@iter{71}{42857143}%
    \MFP@atan@iter{60}{00000000}\MFP@atan@iter{33}{33333333}%
    \MFP@Rcopy sy\MFP@scaledmul
  \fi}%
%    \end{macrocode}
%
% \subsection{Logarithms}
%
% Now for logarithms. We are going to compute both common logarithms
% (base $10$) and natural logarithms (base $e$). The first step of the
% calculation is be essentially trivial and works with base 10: to
% get the integer part of the log for numbers with positive integer part,
% count the digits in the integer part and subtract $1$. For numbers less
% than one, count the number of zeros at the beginning of the fractional
% part and add $1$ (subtract this from the result of the second part). This
% reduces the problem to numbers $1 \le x < 10$. A few divisions (when
% necessary) reduce to the case where $x = 1 + u$ with $u$ small enough
% that the power series for $\log (1 + u)$ can be computed accurately in
% an acceptable number of of terms. Then we proceed as in the code for
% sine.
%
% The power series produces a logarithm in base $e$ so we ultimately get
% the answer in two parts, with the parts calculated for different bases.
% The last step for the common log is to multiply the second part by a
% conversion factor and add the first to it. For natural log, convert the
% first and add the second. Which one is to be returned is passed as a
% boolean.
%
% We keep the value-so-far in register $s$ and the modified
% $x$-value in register $t$.
%    \begin{macrocode}
\newif\ifMFP@natural
\def\MFP@Rlog{\MFP@naturalfalse\MFP@Rlog@}%
\def\MFP@Rln{\MFP@naturaltrue\MFP@Rlog@}%
\def\MFP@Rlog@{%
  \ifnum\MFP@x@Sgn=0
    \MFP@logofzero@err
    \MFP@Rloadz{-1}\LogOfZeroInt\LogOfZeroFrac
  \else
    \ifnum \MFP@x@Sgn<0
      \MFP@warn{The logarithm of a negative number is complex.
      \MFP@msgbreak Only the real part will be computed}%
      \def\MFP@x@Sgn{1}%
    \fi
    \MFP@Rload s000%
%    \end{macrocode}
%
% If the integer part is $0$, the fractional part is not. Save the
% number of places that will be shifted in \cs{MFP@tempa}. We use
% \cs{number} to strip the leading zeros and (essentially) we count
% the number of digits that remain. Then we shift left, putting the first
% digit into the integer part of \reg{s} and the rest into the
% fractional part.
%    \begin{macrocode}
    \ifnum \MFP@x@Int=0
      \edef\MFP@x@Tmp{\number\MFP@x@Frc}%
      \MFP@tempa=\MFP@numshiftL\MFP@x@Tmp\relax
      \def\MFP@s@Sgn{-1}%
      \edef\MFP@t@Int{\@xp\MFP@oneofmany\MFP@x@Tmp\MFP@end}%
      \edef\MFP@t@Frc{\@xp\@gobble\MFP@x@Tmp0}%
      \MFP@padtoeight\MFP@t@Frc
    \else
%    \end{macrocode}
% When the integer part is not $0$, we get the number of digits to
% shift again in \cs{MFP@tempa}. It will be one less than the number of
% integer digits.
%    \begin{macrocode}
      \MFP@tempa\MFP@numshiftR\MFP@x@Int
      \edef\MFP@x@Tmp{\MFP@x@Int\MFP@x@Frc}%
      \ifnum\MFP@tempa>0 \def\MFP@s@Sgn{1}\fi
      \edef\MFP@t@Int{\@xp\MFP@oneofmany\MFP@x@Tmp\MFP@end}%
      \edef\MFP@x@Tmp{\@xp\@gobble\MFP@x@Tmp}%
      \edef\MFP@t@Frc{\@xp\MFP@eightofmany\MFP@x@Tmp\MFP@end}%
    \fi
%    \end{macrocode}
%
% Now the integer part of $\log_{10} x$ is known. We save it in $s$.
% Also set the sign of the reduced argument (positive). Then call
% \cs{MFP@Rlog@reduce}, which reduces $x$ to less than $1.161\,$ while
% possibly increasing $s$. For the natural log, we convert the value in
% $s$.
%
% If the reduced $x$ is $1$, return the value in $s$, otherwise call the
% power series program (discarding the integer part of $t$, which should
% be a $1$). Finally, convert the returned result if necessary and add
% register $s$ to it.
%    \begin{macrocode}
    \edef\MFP@s@Int{\number\MFP@tempa}%
    \def\MFP@t@Sgn{1}%
    \MFP@Rlog@reduce
    \ifMFP@natural \MFP@Rcopy sx\MFP@RbaseE \MFP@Rcopy zs\fi
    \ifnum\MFP@t@Frc=0
      \MFP@Rcopy sz%
    \else
      \def\MFP@t@Int{0}\MFP@Rlog@prog
      \ifMFP@natural\else \MFP@Rcopyzx \MFP@RbaseX \fi
      \MFP@Rcopy sy\MFP@Rcopyzx\MFP@Radd
    \fi
  \fi}%
%    \end{macrocode}
%
% We determine the size of a right shift by lining up the digits in
% the integer part, followed by the possible numbers, and picking out the
% ninth argument. Similarly, to get a left shift we line up the digits
% of the fractional part (minus the leading zeros) followed by the
% possible numbers, and again picking the ninth.
%    \begin{macrocode}
\def\MFP@numshiftR#1{\@xp\MFP@ninthofmany#176543210\MFP@end}%
\def\MFP@numshiftL#1{\@xp\MFP@ninthofmany#112345678\MFP@end}%
%    \end{macrocode}
%
% In \cs{MFP@Rlog@reduce} we divide by the square root of 10 if the number
% is significantly larger than that (adding $.5$ to value-so-far). We
% repeat with the 4th, 8th and 16th roots. It seems that this could be
% where errors can accumulate, so the divisions are done with double
% precision multiplication and $x$ is scaled by 100. Our check whether
% $x > \sqrt{10}$ is rather rough: comparing the first three digits only,
% but even in the worst case, the final $x$ is less than $1.1605$, so at
% most $0.161$ is fed to the power series.
%    \begin{macrocode}
\def\MFP@Rlog@reduce{%
  \MFP@Rcopy tx\MFP@RmulC\MFP@Rcopyz t%
  \MFP@reduceonce {316}{31622776}{60168379}{50000000}%
  \MFP@reduceonce {177}{56234132}{51903491}{25000000}%
  \MFP@reduceonce {133}{74989420}{93324558}{12500000}%
  \MFP@reduceonce {115}{86596432}{33600654}{06250000}%
  \MFP@Rcopy tx\MFP@RdivC\MFP@Rcopyz t}%
\def\MFP@reduceonce#1#2#3#4{%
  \ifnum\MFP@t@Int>#1\relax
    \MFP@Rcopy tx%
    \MFP@DPmul 0{#2}{#3}\MFP@Rcopyz t%
    \MFP@Rcopy sx\MFP@Rload y10{#4}\MFP@Radd
    \MFP@Rcopyz s%
  \fi}%
%    \end{macrocode}
%
% Now we have a value for $t$ of the form $1 + u$ with $0\le u < 0.161$.
% We will use the formula
% $$
%    \ln (1 + u) = \sum_{n=1}^\infty (-1)^{n-1} \frac{u^n}{n}.
% $$
% We only need to carry it far enough to assure that the remaining terms
% would be zero in our finite resolution arithmetic, that is
% $(.161)^k/k < .5\times 10^{-8}$. This is satisfied by $k=10$.
% So we carry the sum to 9 places.
%
% Again, we compute this by
% $$
%    u(1-au(1-bu(1-cu(1-du(1-eu(1-fu(1-gu(1-hu))))))))
% $$
% where $a= 1/2$, $b = 2/3$,\dots, $g=7/8$, and $h=8/9$
% This arrangement allows us to reuse \cs{MFP@com@iter}.
%    \begin{macrocode}
\def\MFP@Rlog@prog{%
  \MFP@Rcopy tx\MFP@Rload y10{88888889}\MFP@Rsmul
  \MFP@com@iter{87500000}\MFP@com@iter{85714286}\MFP@com@iter{83333333}%
  \MFP@com@iter{80000000}\MFP@com@iter{75000000}\MFP@com@iter{66666667}%
  \MFP@com@iter{50000000}\MFP@flipz\MFP@Rcopyzx\MFP@Rcopy ty\MFP@Rsmul}%
%    \end{macrocode}
%
% \subsection{Powers}
%
% With the exponential function we immediately return $1$ if $x=0$. We
% call two separate handlers for positive and negative $x$. This is
% because the issues are different between positive and negative
% exponents.
%    \begin{macrocode}
\def\MFP@Rexp{%
  \ifcase\MFP@x@Sgn\relax
    \MFP@Rloadz 110%
  \or
    \MFP@Rexp@pos
  \else
    \def\MFP@x@Sgn{1}%
    \MFP@Rexp@neg
  \fi}%
%    \end{macrocode}
%
% One issue for positive exponents is overflow, so we issue an error
% message for that case. The largest mumber that will not produce
% overflow is $18.42068074$ so we first compare to that; if larger,
% issue the error message and return $99999999.99999999$.
%
% We compute the integer power first, using an \cs{ifcase}. Because there
% are only 19 cases to consider a table lookup is faster than
% multiplications.
%
% Then, we examine the first digit $d$ after the decimal and compute
% $e^{0.d}$, again by cases. This is multiplied by the integer power
% previously found. What remains is the rest of the fractional part of
% $x$, which is strictly less than $0.1$. The exponential of this is
% computed using the first several terms of the power series for $e^x$.
%    \begin{macrocode}
\def\MFP@Rexp@pos{%
  \MFP@Rload y1{18}{42068074}\MFP@Rcmp
  \ifMFP@pos
    \MFP@expoverflow@err
    \MFP@Rloadz 1\MaxRealInt\MaxRealFrac
  \else
    \MFP@tempa\MFP@x@Int
    \edef\MFP@powerof@e{%
     1\ifcase\MFP@tempa
      10\or
      2{71828183}\or
      7{38905610}\or
      {20}{08553692}\or
      {54}{59815003}\or
      {148}{41315910}\or
      {403}{42879349}\or
      {1096}{63315843}\or
      {2980}{95798704}\or
      {8103}{08392758}\or
      {22026}{46579481}\or
      {59874}{14171520}\or
      {162754}{79141900}\or
      {442413}{39200892}\or
      {1202604}{28416478}\or
      {3269017}{37247211}\or
      {8886110}{52050787}\or
      {24154952}{75357530}\or
      {65659969}{13733051}\else
      {\MaxRealInt}{\MaxRealFrac}\fi}%
    \@xp\MFP@Rloadz\MFP@powerof@e
    \ifnum\MFP@x@Frc=0
    \else
      \MFP@Rcopyz s%
      \MFP@tempa=\@xp\MFP@oneofmany\MFP@x@Frc\MFP@end
      \edef\MFP@powerof@e{%
      y1\ifcase\MFP@tempa
        10\or
        1{10517092}\or
        1{22140276}\or
        1{34985881}\or
        1{49182470}\or
        1{64872127}\or
        1{82211880}\or
        2{01375271}\or
        2{22554093}\or
        2{45960311}\else
        10\fi}%
      \edef\MFP@t@Frc{0\@xp\@gobble\MFP@x@Frc}%
      \MFP@Rcopy sx\@xp\MFP@Rload\MFP@powerof@e\MFP@Rmul
      \ifnum\MFP@t@Frc=0
      \else
        \MFP@Rcopyz s\MFP@Rload t10\MFP@t@Frc
        \MFP@Rexp@pos@prog
        \MFP@Rcopy sx\MFP@Rcopyzy\MFP@Rmul
      \fi
    \fi
  \fi}%
%    \end{macrocode}
%
% Since the $x$ value is now less than $0.1$, we can get eight places of
% accuracy with only six terms of the power series. We can also arrange to
% use the more efficient \cs{MFP@Rsmul} for multiplication.
%
% We organize the computation thusly
% $$
%   1 + (x + x/2(x + x/3(x + x/4(x + x/5(x + x/6)))))
% $$
% We start by loading $x$ (now in register $t$) into register
% $z$, then repeatedly run \cs{MFP@Rexp@iter} feeding it the
% successive values of $1/n$. This iterator first multiplies the most
% recent result (the $z$ register) by $1/n$, then that by $x$ and
% then adds $x$ to that. The final step is to add $1$.
%    \begin{macrocode}
\def\MFP@Rexp@pos@prog{%
  \MFP@Rcopy tz\MFP@Rexp@iter{14285714}\MFP@Rexp@iter{16666667}%
  \MFP@Rexp@iter{20000000}\MFP@Rexp@iter{25000000}%
  \MFP@Rexp@iter{33333333}\MFP@Rexp@iter{50000000}\MFP@Rcopyzx
  \MFP@Rincr}%
\def\MFP@Rexp@iter#1{%
  \MFP@Rcopyzx\MFP@Rload y10{#1}\MFP@Rsmul
  \MFP@Rcopyzx\MFP@Rcopy ty\MFP@Rsmul
  \MFP@Rcopyzx\MFP@Rcopy ty\MFP@Radd}%
%    \end{macrocode}
% It is impossible to get accuracy to the last digit when $e^x$ is large.
% This is because an absolute error in $x$ converts to a relative error
% in $e^x$, That is, knowing $x$ only to $10^{-8}$ means $e^x$ is off by
% (about) $e^x\cdot 10^{-8}$. Roughly speaking, this means only about $8$
% places of $e^x$ are accurate, so if (for example) the integer part of
% $e^x$ has six places then only two places after the decimal are
% significant.
%
% \bigskip
% The first issue with negative exponents is that it doesn't take much to
% produce a value of $e^{-x}$ that rounds to $0$. Any $x > 19.11382792$. So
% we start by comparing to that value and simply return zero if $x$ is
% larger.
%
% We perform exactly the same reductions as for positive exponents,
% handling the integer part and the first decimal separately. Then we call
% the power series program (not the same).
%    \begin{macrocode}
\def\MFP@Rexp@neg{%
  \MFP@Rload y1{19}{11382792}%
  \MFP@Rcmp
  \ifMFP@pos
    \MFP@Rloadz 000%
  \else
    \MFP@tempa\MFP@x@Int
    \edef\MFP@powerof@e{%
      \ifcase\MFP@tempa
      11{0}\or
      10{36787944}\or
      10{13533528}\or
      10{04978707}\or
      10{01831564}\or
      10{00673795}\or
      10{00247875}\or
      10{00091188}\or
      10{00033546}\or
      10{00012341}\or
      10{00004540}\or
      10{00001670}\or
      10{00000614}\or
      10{00000226}\or
      10{00000083}\or
      10{00000031}\or
      10{00000011}\or
      10{00000004}\or
      10{00000002}\or
      10{00000001}\else
      000\fi}%
    \@xp\MFP@Rloadz\MFP@powerof@e
    \ifnum\MFP@x@Frc=0
    \else
      \MFP@Rcopyz s%
      \MFP@tempa=\@xp\MFP@oneofmany\MFP@x@Frc\MFP@end
      \edef\MFP@powerof@e{%
      y1\ifcase\MFP@tempa
        10\or
        0{90483742}\or
        0{81873075}\or
        0{74081822}\or
        0{67032005}\or
        0{60653066}\or
        0{54881164}\or
        0{49658530}\or
        0{44932896}\or
        0{40656966}\else
        10\fi}%
      \edef\MFP@t@Frc{0\@xp\@gobble\MFP@x@Frc}%
      \MFP@Rcopy sx\@xp\MFP@Rload\MFP@powerof@e\MFP@Rmul
      \ifnum\MFP@t@Frc=0
      \else
        \MFP@Rcopyz s\MFP@Rload t10\MFP@t@Frc
        \MFP@Rexp@neg@prog
        \MFP@Rcopyzx\MFP@Rcopy sy\MFP@Rmul
      \fi
    \fi
  \fi}%
%    \end{macrocode}
%
% Since $x$ is now positive we calculate $e^{-x}$. Again we need only up
% to the 6th power, organized as follows
% $$
% 1 - x(1 - x/2(1 - x/3(1 - x/4(1 - x/5(1 - x/6)))))
% $$
% Since this has exactly the same form as the the power series calculation
% for $\log$ and $\sin$, we can reuse the code in \cs{MFP@com@iter}. We
% end with the final multiplication by $x$ and the subtraction from 1
% rather than call \cs{MFP@com@iter} with a useless multiplication by $1$.
%    \begin{macrocode}
\def\MFP@Rexp@neg@prog{%
  \MFP@Rcopy tx\MFP@Rload y10{14285712}\MFP@Rsmul
  \MFP@com@iter{16666667}\MFP@com@iter{20000000}%
  \MFP@com@iter{25000000}\MFP@com@iter{33333333}%
  \MFP@com@iter{50000000}\MFP@flipz\MFP@Rcopyzx
  \MFP@Rcopy ty\MFP@Rsmul\MFP@flipz}%
%    \end{macrocode}
%
% The most efficient way to take an integer power of a number $x$ is to
% scan the binary code for the exponent. Each digit $1$ in this code
% corresponds to a $2^k$ power of $x$, which can be computed by repeatedly
% squaring $x$. These \emph{dyadic} powers are mutiplied together. We can
% convert this idea to a simple loop illustrated by this example of
% finding $x^{13}$ ($13 = 1101$ in base $2$). Here $p$ holds the current
% product and $q$ holds the current dyadic power of $x$, initialized with
% $p=1$ and $q=x$:
% \begin{enumerate}
% \item Rightmost digit 1: update $p\leftarrow pq = x$ and $q\leftarrow
%   q^2 = x^2$.
% \item Next digit 0: Just update $q\leftarrow q^2 = x^4$.
% \item Next digit 1: update $p \leftarrow pq = x^5$ and $q\leftarrow
%   q^2 = x^8$.
% \item Next digit 1: update $p \leftarrow pq = x^{13}$, detect that we
%   are at the end and skip the update of $q$. Return $p$.
% \end{enumerate}
% Of course, this requires the binary digits of the exponent $n$. But the
% rightmost digit of $n$ is $1$ if and only if $n$ is odd, and we can
% examine each digit in turn if we divide $n$ by $2$ (discarding the
% remainder) at each stage. We detect the end when $n$ is reduced to $1$.
%
% Accuracy is partly a function of the number of multiplications.
% The above scheme requires at most  $\lfloor\log_2 n\rfloor$ squarings
% and at most $\lceil \log_2 n \rceil$ multiplications for $x^n$, while
% directly multiplying $x\cdot x \cdots x$ would require $n-1$
% multiplications.
%
% I have tested with an exponents around $8000$, which has 13 binary
% digits. Each squaring could double the relative error. For that
% large a power, the base has to be near 1 to avoid overflow or underflow.
% So the relative error is about $.5(10)^{-8}$. Doubling that 12 times
% would increase it to about $.00004$, and the result could have as little
% as 4 or 5 significant figures. In these tests, the results were actually
% accurate to 5 or 6 significant figures, starting with 8 figures. Raising
% to this power takes only about $25$ times as long as a single
% multiplication (rather than $7999$ times).
%
% For negative powers we can either find the positive power of $x$ and
% take its reciprocal or take the reciprocal of $x$ and find its positive
% power. We do the second so that overflow can be detected in
% \cs{MFP@@Rpow}.
%    \begin{macrocode}
\def\MFP@Rpow{%
  \ifnum\MFP@y@Frc>0
    \MFP@warn{The "pow" function requires an integer power.
      \MFP@msgbreak The fractional part will be ignored}%
  \fi
  \MFP@loopctr=\MFP@y@Int\relax
  \ifnum\MFP@loopctr=0
    \MFP@Rloadz 110%
  \else
    \ifnum\MFP@x@Sgn=0
      \ifnum\MFP@y@Sgn>0
        \MFP@Rloadz 000%
      \else
        \MFP@badpower@err
        \MFP@Rloadz 1\xOverZeroInt\xOverZeroFrac
      \fi
    \else
      \ifnum\MFP@x@Sgn>0
        \def\MFP@power@Sgn{1}%
      \else
        \edef\MFP@power@Sgn{\ifodd\MFP@loopctr -\fi 1}%
      \fi
      \ifnum\MFP@y@Sgn<0 \MFP@Rinv \MFP@Rcopyzx\fi
      \ifnum\MFP@loopctr=1
        \MFP@Rloadz \MFP@power@Sgn\MFP@x@Int\MFP@x@Frc
      \else
        \MFP@@Rpow
      \fi
    \fi
  \fi}%
%    \end{macrocode}
%
% This implements the algorithm discussed above. We save $x$ in register
% $q$, initialize the starting value of $1$ in \reg{p} and then
% run the loop. If the binary digit just read is a 1 (i.e., \cs{ifodd} is
% true), it multiplies $p$ and $q$. It also saves the last product (copies
% \reg{z} to \reg{p}). This need not be done on the last iteration,
% but must not be moved out of the \cs{ifodd} conditional because
% intervening computations modify $z$. If there are more iterations to do
% (i.e., the \cs{ifnum} is true), this squares $q$ and reduces the
% counter. Note that the exponents $0$ and $1$ do not occur since we have
% handled them separately.
%
% In case of overflow (either the multiplication or the squaring) we
% break the loop and return $\pm\infty$.
%    \begin{macrocode}
\def\MFP@@Rpow{%
  \MFP@Rcopy xq%
  \MFP@Rload p110%
  \MFP@Rpow@loop}%
\def\MFP@Rpow@loop{%
  \ifodd\MFP@loopctr
    \MFP@Rcopy px\MFP@Rcopy qy\MFP@Rmul
    \ifnum \MFP@z@Ovr>0 \MFP@handle@expoverflow
    \else
      \ifnum\MFP@loopctr>1 \MFP@Rcopyz p\fi
    \fi
  \fi
  \ifnum\MFP@loopctr>1
    \MFP@Rcopy qx\MFP@Rsq
    \ifnum \MFP@z@Ovr>0 \MFP@handle@expoverflow
    \else
      \MFP@Rcopyz q%
      \divide\MFP@loopctr 2
      \@XP\MFP@Rpow@loop
    \fi
  \fi}%
\def\MFP@handle@expoverflow{%
  \MFP@expoverflow@err
  \MFP@loopctr=0
  \MFP@Rloadz\MFP@power@Sgn\MaxRealInt\MaxRealFrac}%
%    \end{macrocode}
%
% \subsection{The square root}
%
% One can combine logarithms and exponentials to get any power: to get
% $x^y$, compute $e^{y\ln x}$. This has the disadvantage that it doesn't
% work if $x$ is negative. Most powers of negative numbers are not
% defined, but certainly integer powers are. Thus we have defined
% \cs{MFPpow} and \cs{Rpow} for that case.
%
% If we enforce a positive $x$, then $y$ can have any value. However,
% the computation of $e^{.5\ln x}$ cannot give a result as good as one can
% get from a special purpose algorithm for the square root. For example,
% the inaccuracies in computing $\ln x$ will make $e^{.5\ln 9}$ inexact,
% while the square root function we implement below will produce exactly
% $\sqrt{9} = 3$. In fact, if a square root can be expressed exactly
% within our 8-digit precision, our code will find it.
%
% For the square root we return zero if $x$ is not positive. If the integer
% part of $x$ is $0$, we copy the fractional part to the integer part
% (that is, we multiply by $10^{8}$, remembering to multiply by $10^{-4}$
% later). This makes the square root of such numbers rather more
% accurate. (To get around some other rare but annoying inaccuracies, we
% go through a similar process when the integer part of $x$ is at most $4$
% digits, multiplying by $10^4$ before and by $10^{-2}$ after.)
%
% We then compute the square root using an algorithm that will
% be exact whenever possible. We perform one additional processing step.
% To explain it, note that our algorithm actually produces the largest
% number $s$ with four digits right of the decimal place that satisfies $s^2
% \le x$. That is
% $$
%    s^2 \le x < \left( s + 10^{-4} \right)^2
% $$
% From this it follows that $x = (s+\epsilon)^2 = s^2 + 2s\epsilon +
% \epsilon^2$ with $\epsilon < 10^{-4}$ (and so $\epsilon^2 < 10^{-8}$).
% We estimate this $\epsilon$ and add that estimate to $s$. The estimate
% we use is obtained by discarding the very small $\epsilon^2$ and solving
% for the remaining $\epsilon$ get
% $$
%     \epsilon \approx \bar\epsilon = \frac{x-s^2}{2s}
% $$
% With this value, $s + \bar\epsilon$ misses the exact square root by at
% most $\epsilon^2/(2s) < .5\cdot 10^{-8}$,  because $s \ge 1$.
% The final result $s + \bar\epsilon$ is equivalent to computing the
% average of $s$ and $x/s$. This, possibly divided by $10^4$ or $10^2$ is the
% returned value.
%
% By tests, with rare exceptions, our computations produces a result
% correct in all eight decimal places. In the rare exception, the last
% place is within $1$ of the correct value.
%    \begin{macrocode}
\def\MFP@Rsqrt{%
  \ifcase\MFP@x@Sgn\relax
    \MFP@Rzero
  \or
    \ifnum\MFP@x@Int=0
      \def\MFP@sqrt@reduce{2}%
      \edef\MFP@x@Int{\number\MFP@x@Frc}%
      \edef\MFP@x@Frc{00000000}%
    \else\ifnum\MFP@x@Int<10000
      \def\MFP@sqrt@reduce{1}%
      \edef\MFP@x@Int{\MFP@x@Int\@xp\MFP@fourofmany\MFP@x@Frc\MFP@end}%
      \edef\MFP@x@Frc{\@xp\MFP@gobblefour\MFP@x@Frc0000}%
    \else
      \def\MFP@sqrt@reduce{0}%
    \fi\fi
    \MFP@Rcopy xt%
    \MFP@Isqrt
    \MFP@Rcopyz s\MFP@Rcopyzy
    \MFP@Rcopy tx\MFP@Rdiv
    \MFP@Rcopy sx\MFP@Rcopyzy\MFP@Radd
    \MFP@Rcopyzx\MFP@Rhalve
    \ifcase \MFP@sqrt@reduce\relax
    \or
      \MFP@Rcopyzx\MFP@Rload y10{01000000}\MFP@Rmul
    \or
      \MFP@Rcopyzx\MFP@Rload y10{00010000}\MFP@Rmul
    \fi
  \else
    \MFP@warn{Square root of a negative number. Zero will be returned.}%
    \MFP@Rzero
  \fi}%
\def\MFP@fourofmany#1#2#3#4#5\MFP@end{#1#2#3#4}%
\def\MFP@gobblefour#1#2#3#4{}%
%    \end{macrocode}
%
% There is a rather straightforward pencil and paper algorithm that
% provides the square root digit by digit, and it produces an exact answer
% when that is possible. Unfortunately, the decimal version is not easy to
% code. Fortunately the same algorithm works in any number base and it is
% rather simple to code the binary version (because we only need to decide
% at each stage whether the ``next digit'' is $0$ or $1$. This produces a
% square root in binary digits, from which it is easy to compute the
% number itself. The result is exact if the answer would be a finite
% number of binary digits. We apply it to the integer $10^8 x$. While this
% number is too large for \TeX{} to handle as an integer, it is not that
% hard to convert it to a string of binary digits stored in a macro.
%
% The algorithm simplifies somewhat if we proces a base 4 integer,
% producing a base 2 result. Also, instead of producing the square root
% encoded in a string of binary digits, we simply build the numerical
% result as we discover the binary digits (multiply previous value by two
% and add the new digit.) Fortunately, the square root of $10^8 x$ (and
% the temporary scratch registers used in the code) will never exceed
% \TeX{}'s limit for integers.
%
% The macro \cs{MFP@ItoQ} implements the conversion to base-4 digits.
% The two arguments are the integer and fractional part of $x$. The
% result is stored in \cs{MFP@ItoQ@Tmp}, which is so far only used by the
% square root code.
%
% The test \cs{ifodd}\cs{MFP@tempb} is used to get the binary digits.
% Combining two of them yields the quadrenary digits. The
% \cs{ifodd}\cs{MFP@tempa} tests are there to check whether there
% will be a remainder after division by $2$, which should then be
% inserted at the front of \cs{MFP@tempb} before division by $2$. Two
% divisions by $2$ each iteration amounts to division by $4$. This is slightly
% more efficient than dividing by $4$ and determining the remainder.
%    \begin{macrocode}
\def\MFP@ItoQ#1#2{%
  \MFP@tempa#1\relax\MFP@tempb#2\relax
  \def\MFP@ItoQ@Tmp{}\MFP@ItoQ@loop}%
\def\MFP@ItoQ@loop{%
  \ifodd\MFP@tempb
    \ifodd\MFP@tempa \advance\MFP@tempb \MFP@ttteight\relax\fi
    \divide\MFP@tempa2 \divide\MFP@tempb2
    \edef\MFP@ItoQ@Tmp{\ifodd\MFP@tempb 3\else 1\fi\MFP@ItoQ@Tmp}%
  \else
    \ifodd\MFP@tempa \advance\MFP@tempb \MFP@ttteight\relax\fi
    \divide\MFP@tempa2 \divide\MFP@tempb2
    \edef\MFP@ItoQ@Tmp{\ifodd\MFP@tempb 2\else 0\fi\MFP@ItoQ@Tmp}%
  \fi
  \ifodd\MFP@tempa \advance\MFP@tempb \MFP@ttteight\relax\fi
  \divide\MFP@tempa 2 \divide\MFP@tempb 2
  \ifnum\MFP@tempa>0
    \@xp\MFP@ItoQ@loop
  \else\ifnum\MFP@tempb>0
    \@XP\MFP@ItoQ@loop
  \fi\fi}%
%    \end{macrocode}
%
% This integer square root $n$ is $10^4$ times the largest number $y$
% satisfying $y^2 \le x$ and having at most four decimal places. The rest of
% the code after the \cs{MFP@Isqrt@loop} is intended to divide $n$
% (returned in \cs{MFP@tempc}) by $10^4$ in order to get the number $y$
% itself.
%    \begin{macrocode}
\def\MFP@Isqrt{%
  \MFP@ItoQ\MFP@x@Int\MFP@x@Frc
  \MFP@tempa=0 \MFP@tempb=0 \MFP@tempc=0
  \expandafter\MFP@Isqrt@loop\MFP@ItoQ@Tmp\MFP@end
  \MFP@tempa=\MFP@tempc
  \divide\MFP@tempc\MFP@tttfour
  \edef\MFP@z@Int{\number\MFP@tempc}%
  \multiply\MFP@tempc \MFP@tttfour
  \advance\MFP@tempa -\MFP@tempc
  \edef\MFP@z@Frc{\number\MFP@tempa}%
  \makeMFP@fourdigits\MFP@z@Frc
  \edef\MFP@z@Frc{\MFP@z@Frc0000}%
  \def\MFP@z@Sgn{1}}%
%    \end{macrocode}
%
% The following is a loop that essentially performs a base-2 version of
% the base-10 algorithm that I learned at age 12 from my father
% (apparently it was taught in eighth or ninth grade in his day, but not
% in mine). Seeing it written out, I am surprise at how concise and
% elegant it is!
%    \begin{macrocode}
\def\MFP@Isqrt@loop#1{%
  \ifx\MFP@end #1%
  \else
    \multiply\MFP@tempa 2 \multiply\MFP@tempb 4 \multiply\MFP@tempc 2
    \advance \MFP@tempb#1\relax
    \ifnum\MFP@tempa<\MFP@tempb
       \advance\MFP@tempc 1 \advance\MFP@tempa 1
       \advance\MFP@tempb -\MFP@tempa
       \advance\MFP@tempa 1
    \fi
    \expandafter\MFP@Isqrt@loop
  \fi}%
%    \end{macrocode}
%
%^^A For my own benefit: the above code finds the next binary digit and
%^^A updates the square root (in \cs{MFP@tempc}) by appending that digit. The
%^^A new digit is also appended to the end of \cs{MFP@tempa}. This is
%^^A subtracted from \cs{MFP@tempb}, but only if the last digit is a 1. Then
%^^A the next quadrenary digit is appended to \cs{MFP@tempb}. Finally, the
%^^A last binary digit found is added (not appended) to \cs{MFP@tempa}. The
%^^A ``appending'' of a digit means a multiplication by $2$ (or $4$) and the
%^^A addition of the digit. We perform such additions only if the digit is a
%^^A 1, and we determine if the digit is 1 or 0 by the \cs{ifnum} test.
%
% \subsection{Random numbers}
%
% We borrow the code of \file{random.tex} to generate a random integer in
% the range $1$ to $2^{31}-2$, inclusive. Mathematically, this works
% because the modulus $m = 2^{31}-1$ is a prime number, and the
% multiplicative group of nonzero elements of $\mathbb{Z}_m$ is cyclic.
% The multiplier chosen (in our cases $16\,807$, $48\,271$, or $69\,621$)
% has to be a generator of that group.
%
% The first step is the code for \cs{nextrandom} from \file{random.tex}.
% We could omit this if it is already defined, or we could even input
% \file{random.tex} but, for better control, we define it ourselves with
% an internal name. This code leaves the next random number in
% \cs{MFP@randseed}. The initial seed is calculated from the time and
% date if it was not positive
%    \begin{macrocode}
\newcount\MFP@randseed % the random number (and starting seed)
\def\MFP@nextrand{\begingroup
  \ifnum\MFP@randseed<1
    \global\MFP@randseed\time
    \global\multiply\MFP@randseed388 \global\advance\MFP@randseed\year
    \global\multiply\MFP@randseed31 \global\advance\MFP@randseed\day
    \global\multiply\MFP@randseed97 \global\advance\MFP@randseed\month
    \MFP@nextrand \MFP@nextrand \MFP@nextrand
  \fi
  \MFP@tempa\MFP@randseed
  \divide\MFP@tempa \MFP@rand@q % modulus = m*q + r
  \MFP@tempb\MFP@tempa
  \multiply\MFP@tempa \MFP@rand@q
  \global\advance\MFP@randseed-\MFP@tempa % seed mod q
  \global\multiply\MFP@randseed \MFP@rand@m
  \multiply\MFP@tempb \MFP@rand@r
  \global\advance\MFP@randseed-\MFP@tempb
  \ifnum\MFP@randseed<\z@ \global\advance\MFP@randseed "7FFFFFFF\relax\fi
  \endgroup}%
%    \end{macrocode}
%
% \DescribeMacro{\MFPrandgenA}\DescribeMacro{\MFPrandgenB}
% \DescribeMacro{\MFPrandgenC}
% We have paametrized \cs{MFP@nextrand} so that any suitable multiplier
% can be used. The following commands each select one of the three
% multipliers that we provide, plus precomputed values for the quotient
% and remainder. We default to generator ``A''.
%    \begin{macrocode}
\def\MFPrandgenA{\def\MFP@rand@m{16807 }\def\MFP@rand@q{127773 }%
  \def\MFP@rand@r{2836 }}%
\def\MFPrandgenB{\def\MFP@rand@m{48271 }\def\MFP@rand@q{44488 }%
  \def\MFP@rand@r{3399 }}%
\def\MFPrandgenC{\def\MFP@rand@m{69621 }\def\MFP@rand@q{30845 }%
  \def\MFP@rand@r{23902 }}%
\MFPrandgenA
%    \end{macrocode}
%
% The command \verb$\MFPranr{$\meta{x}\verb$}\X$ will take a parameter $x$
% and define \cs{X} to contain a (pseudo)random real number in the
% interval $[0,x]$. Theoretically, the number should lie in $[0,x)$, but
% rounding will make $x$ itself a possible value. Similarly, \cs{Rrand}
% will replace the $x$ on top of the stack with this random value. To get
% the result, we call \cs{MFP@getrand} twice to produce two random
% integers in the range $[0,99999999]$ and assemble them into a double
% precision multiplier less than $1$. Then we multiply $x$ by that with
% our \cs{MDP@DPmul}.
%
% The test at the end of \cs{MFP@getrand} fails only about 1 time in 50,
% so the odds are vanishingly small that more than a few tries are needed.
%    \begin{macrocode}
\def\MFP@getrand{% leaves result in \MFP@tempa
  \MFP@nextrand
  \MFP@tempa\MFP@randseed
  \advance\MFP@tempa-1
  \divide\MFP@tempa 21 % (2^31-3)= 100000000*21 + r
  \ifnum \MFP@ttteight> \MFP@tempa
  \else \@xp\MFP@getrand\fi}%
\def\MFP@Rrand{%
  \MFP@getrand \edef\MFP@a@Tmp{\number\MFP@tempa}%
  \MFP@getrand \edef\MFP@b@Tmp{\number\MFP@tempa}%
  \MFP@DPmul0\MFP@a@Tmp\MFP@b@Tmp}%
%    \end{macrocode}
%
% \DescribeMacro{\MFPsetseed}
% Finally, a user-level command to set the seed value.
%    \begin{macrocode}
\def\MFPsetseed#1{\global\MFP@randseed #1\relax}%
\MFP@xfinish
%</extra>
%    \end{macrocode}
%\Finale
%