summaryrefslogtreecommitdiff
path: root/systems/msdos/emtex-contrib/bonus/emtex.tex
diff options
context:
space:
mode:
Diffstat (limited to 'systems/msdos/emtex-contrib/bonus/emtex.tex')
-rw-r--r--systems/msdos/emtex-contrib/bonus/emtex.tex1476
1 files changed, 1476 insertions, 0 deletions
diff --git a/systems/msdos/emtex-contrib/bonus/emtex.tex b/systems/msdos/emtex-contrib/bonus/emtex.tex
new file mode 100644
index 0000000000..66b8d4572c
--- /dev/null
+++ b/systems/msdos/emtex-contrib/bonus/emtex.tex
@@ -0,0 +1,1476 @@
+\documentstyle[times,changebar]{csart}
+\driver{dvips}
+\font\mf=logo10
+\hyphenchar\mf=-1
+% Metafont from the METAFONT Documentation
+\def\METAFONT{{\mf METAFONT}}
+% BIBTeX from the BiBTeX Documentation
+\def\BIBTeX{{\rm B\kern-.05em{\sc i\kern-.025em b}\kern-.08em
+ T\kern-.1667em\lower.7ex\hbox{E}\kern-.125emX}}
+% SliTeX from the SliTeX Documentation
+\def\SLiTeX{S\kern-.065em L\kern-.18em\raise.32ex\hbox{i}\kern-.03em\TeX}
+% AMSTeX from the AMSTeX Files
+\def\AmSTeX{{$\cal A$\kern-.1667em\lower.5ex\hbox{$\cal M$}\kern-.125em
+ $\cal S$-\TeX}}
+% PiCTeX Documentation from the PiCTeX Files
+\def\PiC{P\kern-.12em\lower.5ex\hbox{I}\kern-.075emC}
+\def\PiCTeX{\PiC\kern-.11em\TeX}
+%
+\def\PICTEX{\PiCTeX}
+\def\pictex{\PiCTeX}
+\def\AMSTeX{\AmSTeX}
+\def\AMSTEX{\AmSTeX}
+\def\amstex{\AmSTeX}
+\def\BibTeX{\BIBTeX}
+\def\bibtex{\BIBTeX}
+\def\SliTeX{\SLiTeX}
+\def\slitex{\SLiTeX}
+\def\Metafont{\METAFONT}
+\def\metafont{\METAFONT}
+\def\MF{\METAFONT}
+\def\latex{\LaTeX}
+% TeXsis from the TeXsis documentation
+\def\TeXsis{\TeX sis}
+\def\TeXcad{\TeX cad}
+\def\WEB{{\mf WEB}}
+\def\PS{{\sc PostScript}}
+
+\def\README{\verb|readme.eng| or \verb|readme.ger|}
+\begin{document}
+\title{em\TeX: TeX for OS/2, PC-DOS and MS-DOS}
+\author{Eberhard Mattes\\(shortened, and with additions by UK \TeX\
+Archive\\edited by Sebastian Rahtz)}
+\date{25-Sep-1990, with modifications of 06-Oct-1991\\additions
+8 April 92 \& 26 February 1993}
+\maketitle
+\tableofcontents
+\section{Preliminary remarks on the documentation}
+\cbstart
+This document is a typeset version of the machine readable files
+\README, prepared by the UK \TeX\ Archive. Changed sections are noted
+by changebars in the margin.
+\cbend
+
+In order to use \TeX\ or \LaTeX, familiarity with the `programming
+language' \TeX\ or \LaTeX, respectively, is required. Thus in general
+the reading of [1], [2], [5] or [7] is unavoidable. As a brief
+introduction for beginners the \LaTeX\ brief introduction of H. Partl
+(in German) may be used; it can be found on the disk after the
+installation of em\TeX\ (details below). It cannot be used as a
+substitute for [2] or [5], however. Experience shows that trying to
+save time by not reading the documentation fails. This is especially
+true with \TeX.
+
+
+
+\subsection{Book list}
+
+
+`Original works':
+
+\begin{itemize}
+\item[1.] Donald E. Knuth: The \TeX\ book
+
+ The standard work on \TeX\ and plain \TeX\ (in English).
+
+
+\item[2.] Leslie Lamport: \LaTeX: A Document Preparation System
+
+ The standard work for \LaTeX\ (in English).
+ Supplemented by \verb|\emtex\texinput\local.tex| and/or
+\verb|\emtex\doc\local.dvi|.
+
+
+\item[3.] Donald E. Knuth: The \METAFONT\ book
+
+ The standard work for \METAFONT\ (in English).
+
+
+\item[4.] Michael J. Wichura: The \PiCTeX\ Manual
+
+ Manual for \PiCTeX\ (in English).
+ Obtainable (cost: \$30) from the TeX User's Group:
+\cbstart
+ \begin{verse}
+ \TeX\ Users Group\\
+ P. O. Box 869,\\
+ Santa Barbara, CA 93102,\\
+ USA\\
+ telephone=805-899-4673\\
+ email=Internet: TUGboat@Math.AMS.org\\
+ \end{verse}
+\cbend
+\end{itemize}
+
+
+
+Further Books:
+
+\begin{itemize}
+\item[5.] Helmut Kopka: \LaTeX\ Eine Einf\"uhrung
+
+ A manual for \LaTeX\ in German.
+
+\item[6.] Norbert Schwarz: Eine Einf\"uhrung in \TeX
+\item[7.] Norbert Schwarz: Introduction to \TeX
+\end{itemize}
+
+
+
+
+
+\section{Introduction}
+
+
+em\TeX\ consists among others in the following:
+
+\begin{description}
+\item[ \TeX\ ] The well-known text system by Donald E. Knuth
+\item[ \LaTeX\ ] The well-known macro package for TeX by L. Lamport
+\item[ \METAFONT\ ] `font compiler' by Donald E. Knuth
+\item[ dvidrv ] Printer driver and Screen Previewer
+\item[ \TeXcad\ ] A program for drawing LaTeX picture environments
+\end{description}
+
+All programs but \TeXcad\ can be used under DOS as well as OS/2.
+\TeXcad\ can be used only under DOS or in DOS mode of OS/2.
+
+The dvidrv printer drivers support the following printers:
+
+\begin{verse}
+ HP LaserJet+, HP LaserJet II, HP LaserJet III\\
+ HP DeskJet, HP DeskJet+\\
+ Kyocera F-1010\\
+ NEC P6, P7, P2200\\
+ EPSON LQ, FX, and RX series\\
+ Panasonic KX-P1124\\
+ Apple Imagewriter\\
+ C.ITOH 8510A\\
+ Tandy DMP-130\\
+ \ldots and many more dot matrix printers\\
+\end{verse}
+
+
+
+em\TeX\ consists of several packages. Each single package is provided in the
+form of zip files, which have to be unpacked with the program pkunzip, which
+is also provided. Many packages are spread over several zip files, so that
+DSDD diskettes can be used. (But fonts are available only on HD diskettes.)
+The package DVIDRV, for example, is found in the files dvidrv1.zip,
+dvidrv2.zip, and dvidrv3.zip. On the other hand, the package \PICTEX\ is found
+in the single file pictex.zip.
+
+Details of the packages are given in Table \ref{packages}.
+
+\section{Diskettes}
+
+
+On delivery on HD diskettes (1.44 MB), the diskettes contain the
+following files:
+
+
+{\small
+\begin{description}
+\item[Diskette 1]\par
+\begin{quote}
+\begin{tabbing}
+xxxxxxxxxxxxxxxxxx\=xxxxxxx\kill
+ pkz102.exe \> Compression program (self-unpacking program).\\
+ pkunzip.exe\> Unpacking program (from pkz102.exe).\\
+ delete.exe \> File deleting program.\\
+ remove.exe \> Package removing program.\\
+ readme.eng \> This file.\\
+ readme.ger \> German version of this file.\\
+ help.eng \> Frequently asked questions with answers (English).\\
+ help.ger \> Frequently asked questions with answers (German).\\
+ changes.eng \> Changes from older versions (English).\\
+ changes.ger \> Changes from older versions (German).\\
+ changes.pre \> Changes between the pre-releases of emTeX (German).\\
+ tex1.zip \> TEX package, Part 1/2.\\
+ tex2.zip \> TEX package, Part 2/2.\\
+ latex1.zip \> LATEX package, Part 1/2.\\
+\end{tabbing}
+\end{quote}
+
+
+\item[Diskette 2]\par
+\begin{quote}
+\begin{tabbing}
+xxxxxxxxxxxxxxxxxx\=xxxxxxx\kill
+ latex2.zip \> LATEX package, Part 2/2.\\
+ texware.zip \> TEXWARE package.\\
+ web.zip \> WEB package.\\
+ btex1.zip \> BTEX package, Part 1/2.\\
+ btex2.zip \> BTEX package, Part 2/2.\\
+ bmf1.zip \> BMF package, Part 1/2.\\
+\end{tabbing}
+\end{quote}
+
+
+\item[Diskette 3]\par
+\begin{quote}
+\begin{tabbing}
+xxxxxxxxxxxxxxxxxx\=xxxxxxx\kill
+ mfware1.zip \> MFWARE package, Part 1/2.\\
+ mfware2.zip \> MFWARE package, Part 2/2.\\
+ mf1.zip \> MF package, Part 1/3.\\
+ mf2.zip \> MF package, Part 2/3.\\
+ mf3.zip \> MF package, Part 3/3.\\
+ mfjob.zip \> MFJOB package\\
+\end{tabbing}
+\end{quote}
+
+
+\item[Diskette 4]\par
+\begin{quote}
+\begin{tabbing}
+xxxxxxxxxxxxxxxxxx\=xxxxxxx\kill
+ gtex.zip \> GTEX package.\\
+ glatex.zip \> GLATEX package.\\
+ gbtex.zip \> GBTEX package.\\
+ gblatex.zip \> GBLATEX package.\\
+ texcad.zip \> TEXCAD package.\\
+ emsy.zip \> EMSY package.\\
+ pkedit.zip \> PKEDIT package.\\
+ misc\_mf.zip \> MISC\_MF package.\\
+ bibtex.zip \> BIBTEX package.\\
+ makeindx.zip \> MAKEINDX package.\\
+ pictex.zip \> PICTEX package.\\
+ dvidrvma.zip \> DVIDRVMA package.\\
+ lkurz.zip \> LKURZ package.\\
+\end{tabbing}
+\end{quote}
+
+
+\item[Diskette 5]\par
+\begin{quote}
+\begin{tabbing}
+xxxxxxxxxxxxxxxxxx\=xxxxxxx\kill
+ dvidrv1.zip \> DVIDRV package, Part 1/3.\\
+ dvidrv2.zip \> DVIDRV package, Part 2/3.\\
+ bmf2.zip \> BMF, Part 2/2.\\
+ latexdoc.zip \> LATEXDOC package.\\
+ blatex.zip \> BLATEX package.\\
+ dvidrv3.zip \> DVIDRV package, Part 3/3.\\
+\end{tabbing}
+\end{quote}
+
+\end{description}
+}
+
+
+
+\begin{table}
+\caption{List of Packages}\label{packages}
+{
+\footnotesize
+
+\begin{tabular}{lp{2in}p{1in}p{1in}rr}\hline
+Package&Description&Requires&Optional&Files&Size\\
+\hline
+BIBTEX
+ & BibTeX (Bibliography database for \LaTeX)
+ & LATEX
+ & ---
+ & 11
+ & 323\\
+BLATEX
+ & \LaTeX\ for big\TeX\ (extra big \LaTeX)
+ & TEX, BTEX, LATeX
+ & ---
+ & 7
+ & 510\\
+BMF
+ & big\METAFONT\ (extra big \METAFONT)
+ & MF
+ & ---
+ & 11
+ & 1043\\
+BTEX
+ & big\TeX\ (extra big \TeX)
+ & TEX
+ & BLATEX
+ & 9
+ & 986\\
+DVIDRV
+ & Printer drivers and previewers (dvidrv)
+ & ---
+ & TEX
+ & 106
+ & 1491\\
+DVIDRVMA
+ & Manual for the dvidrv drivers
+ & DVIDRV, (EMSY)
+ & ---
+ & 29
+ & 511\\
+EMSY *)
+ & Special fonts of/for em
+ & MF, TEX
+ & LATEX
+ & 19
+ & 25\\
+GBLATEX
+ & \LaTeX\ for big\TeX\ (German hyphenation patterns)
+ & TEX, BTEX, GTEX, LATEX, BLATEX, GLATEX
+ & ---
+ & 7
+ & 541\\
+GBTEX
+ & big\TeX\ (German hyphenation patterns)
+ & TEX, BTEX, GTEX
+ & GBLATEX
+ & 5
+ & 316 \\
+GLATEX
+ & \LaTeX\ (German hyphenation) and brief \LaTeX\ intro.
+ & LATEX, GTEX
+ & ---
+ & 8
+ & 421 \\
+GTEX
+ & Files for typesetting German texts
+ & TEX
+ & GLATEX
+ & 12
+ & 279 \\
+LATEX
+ & \LaTeX\ (to be more exact: I\LaTeX)
+ & TEX
+ & DVIDRV
+ & 73
+ & 1074\\
+LATEXDOC *)
+ & doc files (documented sty files; obsolete)
+ & LATEX
+ & ---
+ & 26
+ & 324\\
+LKURZ *)\\
+ & Source text for the brief \LaTeX\ intro (German)
+ & LATEX
+ & ---
+ & 7
+ & 94\\
+MAKEINDX\\
+ & MakeIndx (to sort \LaTeX\ index)
+ & LATEX
+ & ---
+ & 5
+ & 120\\
+MF
+ & \METAFONT
+ & MFWARE
+ & ---
+ & 191
+ & 1868\\
+MFWARE
+ & Auxiliary programs for \METAFONT
+ & MF
+ & TEX, PKEDIT
+ & 44
+ & 759\\
+MISC\_MF *)
+ & Various font source texts
+ & METAFONT
+ & ---
+ & 5
+ & 134\\
+PICTEX
+ & \PiCTeX\ (graphic macros for \TeX)
+ & TEX
+ & BLATEX (required for \LaTeX)
+ & 5
+ & 147\\
+PKEDIT
+ & Font editor
+ & ---
+ & MFWARE
+ & 4
+ & 100\\
+TEX
+ & em\TeX\ (plain \TeX)
+ & ---
+ & DVIDRV
+ & 104
+ & 1110\\
+TEXCAD
+ & \TeXcad\ (drawing program for \LaTeX\ picture environment)
+ & ---
+ & ---
+ & 18
+ & 244\\
+TEXWARE
+ & Auxiliary programs for \TeX
+ & TEX
+ & ---
+ & 11
+ & 439\\
+WEB *)
+ & The WEB programming system (TANGLE, WEAVE, \ldots)
+ & TEX
+ & ---
+ & 7
+ & 255\\
+\end{tabular}
+
+The packages with *) are usually not installed.
+}
+\end{table}
+
+
+
+
+
+
+
+\section{Directions for pkunzip}
+
+The program pkunzip is part of a program package from PKWARE. It is
+installed as follows on a disk (for example in the directory \verb|c:\pk|):
+
+
+{\footnotesize
+\begin{verbatim}
+ md c:\pk
+ a:pkz102 c:\pk
+\end{verbatim}
+}
+
+These lines mean the following:
+
+
+{\footnotesize
+\begin{verbatim}
+ md c:\pk Make the directory
+ a:pkz102 Load the self-unpacking program on drive a:
+ c:\pk Target directory
+\end{verbatim}
+}
+
+Please observe the license conditions at the end of manual.doc
+(contained in pkz102.exe)!
+
+The contents of a zip file (here dvidrvma.zip) can be displayed as follows:
+
+
+{\footnotesize
+\begin{verbatim}
+ pkunzip -vb a:dvidrvma
+\end{verbatim}
+}
+
+These lines have the following meaning:
+
+
+{\footnotesize
+\begin{verbatim}
+ pkunzip Call the unpacking program
+ -vb List the contents of a zip file (brief listing)
+ a:dvidrvma zip file
+\end{verbatim}
+}
+
+
+
+\section{Installation}
+
+
+\cbstart
+First read this file (a shortened version of \README, which
+you should also look at) in its entirety.
+\cbend
+Then you should read
+the license conditions at the end of manual.doc (contained in pkz
+102.exe) for pkzip/pkunzip. (And follow the conditions.)
+
+For the installation, the program pkunzip.exe should be copied onto the disk.
+A directory should be used that is in the path for executables (PATH). For
+OS/2 users: There is also an OS/2 version of pkzip/pkunzip, but this is not
+supplied with em\TeX.
+\cbstart
+If you do not have this, you have to use pkunzip in
+the DOS compatibility environment, or use the public domain {\tt
+ unzip} program.
+\cbend
+
+All of the following examples assume that em\TeX\ is to be installed
+on drive c: (You can however install em\TeX\ on another disk, if there
+is enough space.) In case an older version of em\TeX\ is already
+installed on the disk, this should first be removed. First the files
+you have modified should be saved (usually only batch and
+configuration files). Moreover, before removing em\TeX from the disk,
+the diskettes should be checked for readability, for example with
+
+
+{\footnotesize
+\begin{verbatim}
+ pkunzip -t a:*
+\end{verbatim}
+}
+
+These lines have the following meaning:
+
+
+{\footnotesize
+\begin{verbatim}
+ pkunzip Call the unpacking program
+ -t Check the zip files
+ a:* All the zip files on drive a:
+\end{verbatim}
+}
+
+The removal of em\TeX\ is done with the program delete, which is
+supplied on the first diskette. This is done as follows (drive c:):
+
+
+{\footnotesize
+\begin{verbatim}
+ a:delete -sd c:\emtex\*.*
+\end{verbatim}
+}
+
+These lines have the following meaning:
+
+{\footnotesize
+\begin{verbatim}
+ a: Load the program from diskette (first diskette!)
+ delete Call the file deletion program
+ -s Also delete in subdirectories
+ -d Remove directories
+ c:\emtex\*.* Files to be removed
+\end{verbatim}
+}
+
+Since by this procedure all files in the directory \verb|\emtex| and in all
+subdirectories of this directory will be deleted, you should not use this
+directory for your own files!
+
+Now the individual packages can be installed. The following packages are
+usually installed (the packages in parentheses do not have to be installed):
+
+\begin{tabbing}
+ TEX:xxxx xxx\= TEX, DVIDRV, (PICTEX), (TEXWARE)\kill
+ \TeX: \> TEX, DVIDRV, (PICTEX), (TEXWARE)\\
+ \LaTeX: \> TEX, DVIDRV, LATEX, (BIBTEX), (TEXWARE), (MAKEINDX)\\
+ \METAFONT: \> MF, MFWARE, (PKEDIT), (TEX)\\
+\end{tabbing}
+
+For example, to install the package LATEX from drive a: onto disk c:, the
+following should be entered:
+
+
+{\footnotesize
+\begin{verbatim}
+ pkunzip -d -o a:latex? c:\
+\end{verbatim}
+}
+
+This line means the following:
+
+
+{\footnotesize
+\begin{verbatim}
+ pkunzip Call the unpacking program
+ -d Use directories stored in zip file
+ -o Overwrite existing files
+ a:latex? Unpack the package LATEX (latex1.zip, ...)
+ c:\ Target path
+\end{verbatim}
+}
+
+In this way the files will automatically be copied into the right
+directories. After installation you should read (or print and read) the
+following files:
+
+
+{\footnotesize
+\begin{verbatim}
+\emtex\doc\english\texware.doc (TEX package, English)
+\emtex\doc\german\texware.doc (TEX package, German)
+\emtex\doc\english\dvidrv.doc (DVIDRV package, English)
+\emtex\doc\german\dvidrv.doc (DVIDRV package; do not print out; see below!)
+\end{verbatim}
+}
+
+Moreover, the license conditions in the following files should be observed:
+
+
+{\footnotesize
+\begin{verbatim}
+\emtex\doc\makeindx.cpy (MAKEINDX package)
+\emtex\texinput\ghyphen.min (GTEX package)
+\emtex\texinput\ghyphen.max (GTEX package)
+\end{verbatim}
+}
+
+
+If you have installed the package DVIDRV and have followed the directions in
+the part `Installation of the printer driver and screen previewer' of this
+file, then you should install the package DVIDRVMA. This enables you to print
+out the `real' manual for the package DVIDRV (as opposed to dvidrv.doc), if
+you have available a suitable printer. After printing the manual you can
+again delete the files taken from DVIDRVMA (see below). If you cannot, or do
+not want to, print the dvidrv manual, then you have to content yourself with
+the indications in dvidrv.doc.
+
+After the installation of DVIDRV you can print out the other instructions (or
+look at them on the screen). Reading
+
+
+{\footnotesize
+\begin{verbatim}
+ \emtex\doc\english\emtex.dvi (TEX package)
+ \emtex\doc\local.dvi (LATEX package)
+\end{verbatim}
+}
+
+is especially recommended.
+
+In order to use \TeX\ or \METAFONT, various environment variables still have to
+be set; see the section `Environment Variables' further below in this file.
+
+If you want to use \LaTeX\ together with \PiCTeX, then big\TeX\ has to be used.
+This is a bigger (but slower) version of em\TeX. At present only a preliminary
+version is available.
+
+A brief introduction to \LaTeX\ in German is found in the package GLATEX.
+Among the files delivered is the macro package german.sty of H. Partl; if you
+want to typeset German or other non-English texts with \TeX\ or \LaTeX, you
+should read the corresponding instruction \verb|\emtex\doc\germdoc.dvi|.
+
+Since there are some files which you will not need, you should write a
+batch file to delete the ones not needed. In this way you can save some
+work in the next installation of em\TeX. For example, if you work under
+DOS, you will not need the OS/2 versions of \TeX\ and \METAFONT. It is also
+possible to extract single files from a zip file; see manual.doc in
+pkz102.exe. Example:
+
+
+{\footnotesize
+\begin{verbatim}
+ pkunzip -d a:pkedit c:\ emtex\pkedit.exe
+\end{verbatim}
+}
+
+This line means the following:
+
+
+{\footnotesize
+\begin{verbatim}
+ pkunzip Call the unpacking program
+ -d Use directories stored in zip file
+ a:pkedit Unpack the package PKEDIT
+ c:\ Target path
+ emtex\pkedit.exe File name (without leading backslash!)
+\end{verbatim}
+}
+
+
+You'll find some frequently asked questions with answers in the file
+help.eng (and help.ger) on the first diskette.
+
+
+
+\section{Removing a package}
+
+
+You can remove a package from the hard disk if the appropriate REM file is
+supplied --- these files appear in em\TeX\ sets made available after 2nd
+May 1990. To remove a package the program `remove', on the first disk, is
+needed. If, for example, you want to remove the DVIDRVMA package from the C:
+drive you would enter the following commands:
+
+
+{\footnotesize
+\begin{verbatim}
+ a:remove c:\emtex\remove\dvidrvma.rem c:\
+\end{verbatim}
+}
+
+where
+
+{\footnotesize
+\begin{verbatim}
+ a: load the program from the first disk
+ remove run the package removal program
+ c:\emtex\remove\dvidrvma.rem
+ the list of files comprising the package
+ c:\ remove the package from this disk
+\end{verbatim}
+}
+
+
+
+
+\section{Directories}
+
+
+The following directories are created during the installation (see also
+emtex.dvi, local.dvi, texware.doc, and mfware.doc):
+
+\begin{tabbing}
+xxxxxxemte\=xxxxx\kill
+\verb|\emtex|\\
+\> Programs, batch files, and configuration files.\\
+\\
+\verb|emtex\doc|\\
+\> Instructions and Manuals. The texts in this directory are available\\
+\> in only one language (English or German).\\
+\\
+\verb|emtex\doc\english|\\
+\> English Instructions and Manuals.\\
+\\
+\verb|emtex\doc\german|\\
+\> German Instructions and Manuals.\\
+\\
+\verb|emtex\doc\gr180|\\
+\> Graphic files for the dvidrv manual (180 DPI).\\
+\\
+\verb|emtex\doc\gr300|\\
+\> Graphic files for the dvidrv manual (300 DPI).\\
+\\
+\verb|emtex\doc\gr360|\\
+\> Graphic files for the dvidrv manual (360 DPI).\\
+\\
+\verb|emtex\texfmts|\\
+\> \TeX\ format files (macro packages in a fast-loading format;\\
+\> for example, plain and \LaTeX) and tex.poo.\\
+\\
+\verb|emtex\btexfmts|\\
+\> big\TeX\ format files (macro packages in a fast-loading format;\\
+\> for example, plain and \LaTeX) and tex.poo.\\
+\\
+\verb|emtex\tfm|\\
+\> tfm files (\TeX\ font metrics; font descriptions).\\
+\\
+\verb|emtex\texinput|\\
+\> Texts which will be read by \TeX\ (and \BibTeX).\\
+\\
+\verb|emtex\bibinput|\\
+\> Bibliography database for \BibTeX.\\
+\\
+\verb|emtex\mfinput|\\
+\> Texts which will be read by \METAFONT\ (and MFT).\\
+\\
+\verb|emtex\mfbases|\\
+\> \METAFONT\ base files (macro packages in a fast-loading format;\\
+\> for example plain and cm) and mf.poo.\\
+\\
+\verb|emtex\bmfbases|\\
+\> big\METAFONT\ base files (macro packages in a fast-loading format;\\
+\> for example plain and cm) and mf.poo.\\
+\\
+\verb|emtex\mfjob|\\
+\> mfj files (see MFjob).\\
+\\
+\verb|emtex\remove|\\
+\> Package contents listings used by the remove program.\\
+\end{tabbing}
+
+
+
+
+\section{Environment variables and config.sys}
+
+
+In this section it is assumed that \TeX\ has been installed on drive C:.
+
+You should set the environment variables for \TeX\ as follows:
+
+
+{\footnotesize
+\begin{verbatim}
+ set texinput=c:\emtex\texinput
+ set tfm=c:\emtex\tfm
+ set texfmt=c:\emtex\texfmts
+ set btexfmt=c:\emtex\btexfmts (only for bigTeX)
+ set textfm=c:\emtex\tfm
+ set bibinput=c:\emtex\bibinput
+\end{verbatim}
+}
+
+
+The environment variables for \METAFONT\ and MFjob are set as follows:
+
+
+{\footnotesize
+\begin{verbatim}
+ set mfinput=c:\emtex\mfinput
+ set mfbas=c:\emtex\mfbases
+ set bmfbas=c:\emtex\bmfbases (only for bigMETAFONT)
+ set mfjob=c:\emtex\mfjob
+\end{verbatim}
+}
+
+
+In addition, the directory \verb|c:\emtex| should be put in the search
+path, for example:
+
+
+{\footnotesize
+\begin{verbatim}
+ path c:\bin;c:\emtex
+\end{verbatim}
+}
+
+
+All of these lines should be put in the file autoexec.bat (file
+config.sys for OS/2). The file \verb|\emtex\set-tex.bat|
+(\verb|\emtex\set-tex.cmd| in OS/2) can be used as a model, or
+modified and called by autoexec.bat. If the computer complains about
+not enough environment space, you should consult your DOS manual
+concerning the SHELL command in the config.sys file and concerning the
+/E and /P options of the program COMMAND.COM.
+
+If you put all em\TeX\ directories on ONE drive and if the directories are
+organzied as recommended (and as stored in the zip files), it will be
+sufficient to set the environment variable EMTEXDRV (besides PATH):
+
+{\footnotesize
+\begin{verbatim}
+ set emtexdrv=c
+\end{verbatim}
+}
+
+This causes all programs (but dvidrv) to use the default directories on
+drive C:.
+
+The config.sys file should specify at least
+
+{\footnotesize
+\begin{verbatim}
+ FILES=20
+ BUFFERS=20
+\end{verbatim}
+}
+
+greater values are allowed.
+
+
+Under OS/2, the line
+
+{\footnotesize
+\begin{verbatim}
+ IOPL=YES
+\end{verbatim}
+}
+
+is required in config.sys for dviscr and pkedit.
+
+
+
+
+\section{Installation of the printer drivers and the screen previewers}
+
+\begin{enumerate}
+\item Install the DVIDRV package.
+
+\item Copy the fonts to the disk. For example, to install them on drive d: do
+ as follows:
+
+
+{\footnotesize
+\begin{verbatim}
+ md d:\texfonts
+ copy a:*.fli d:\texfonts
+\end{verbatim}
+}
+
+
+The last line has to be repeated for all suitable font diskettes. The
+fonts should if possible not be put into a directory under \verb|\emtex|, in
+order to simplify the installation of a new version of em\TeX\ (that is,
+without having to copy the fonts again to the disk).
+
+\item The following environment variables should be set:
+
+{\footnotesize
+\begin{verbatim}
+ dvidrvinput Search path for dvi files.
+ dvidrvfonts Search path for fli files.
+ dvidrvgraph Search path for graphic files.
+\end{verbatim}
+}
+
+
+ For example, this can be done by
+
+{\footnotesize
+\begin{verbatim}
+ set dvidrvinput=c:\mytex;c:\emtex\doc
+ set dvidrvfonts=d:\texfonts
+ set dvidrvgraph=c:\mytex;c:\emtex\doc\gr$r
+\end{verbatim}
+}
+
+
+The directory \verb|c:\emtex\doc| resp. \verb|c:\emtex\doc\gr$r| is
+used for printing the dvidrv manual. The value stored in DVIDRVFONTS
+will have the following appended to it by prtp6l.bat, for example (\$r
+will be replaced by the resolution):
+
+{\footnotesize
+\begin{verbatim}
+ \pixel.p6l\$rdpi
+\end{verbatim}
+}
+
+Therefore only a directory should be given, and this must not
+end with a \verb|\|. All these lines should be put in the
+file autoexec.bat (for OS/2 config.sys).
+\verb|\emtex\set-tex.bat| or \verb|\emtex\set-tex.cmd| can be
+used as models, or modified and called by autoexec.bat.
+Important: \$r and \$s must be written in small letters. If
+you don't want to set the environment variables (or if you
+cannot), you have to insert the desired directories into the
+configuration files (*.cnf) after renaming.
+
+
+\item To use dviscr under OS/2, you should insert the line
+
+{\footnotesize
+\begin{verbatim}
+ IOPL=YES
+\end{verbatim}
+}
+
+ into config.sys. If you don't need the OS/2 spooler, you should
+ disable it.
+
+\item Now the following batch files can be used:
+\begin{description}
+\item[v ] Screen previewer (dviscr).
+\item[vs ] Screen previewer (dviscrs).
+\item[prthplj ] Printer driver (dvihplj: HP LaserJet+).
+\item[prthplj /od ] Printer driver (dvihplj: HP DeskJet).
+\item[prthplj /ok ] Printer driver (dvihplj: Kyocera F-1010).
+\item[prtp6l ] Printer driver (dvidot p6l: P6 with 180 DPI).
+\item[prtp6m ] Printer driver (dvidot p6m: P6 with 360x180 DPI).
+\item[prtp6h ] Printer driver (dvidot p6h: P6 with 360 DPI).
+\item[prtfx ] Printer driver (dvidot fx: EPSON FX-80).
+\item[prtlql ] Printer driver (dvidot lql: EPSON LQ, 180 DPI).
+\item[prtlqm ] Printer driver (dvidot lqm: EPSON LQ, 360x180 DPI).
+\item[prtlqh ] Printer driver (dvidot lqh: EPSON LQ, 360 DPI).
+\item[ ] Note: not all LQ printers support 360 DPI.
+\item[prtitoh ] Printer driver (dvidot itoh: C.ITOH 8510A).
+\item[prtaiw ] Printer driver (dvidot aiw: Apple Imagewriter).
+\item[msplj ] Create graphic files (Parameters: lj.cnf)
+\item[mspp6l ] Create graphic files (Parameters: p6l.cnf)
+\item[mspp6m ] Create graphic files (Parameters: p6m.cnf)
+\item[mspp6h ] Create graphic files (Parameters: p6h.cnf)
+\item[mspfx ] Create graphic files (Parameters: fx.cnf)
+\item[mspito ] Create graphic files (Parameters: ito.cnf)
+\end{description}
+ If you have a version of DOS prior to 3.3, then you should change the
+ first line of these batch files from
+
+{\footnotesize
+\begin{verbatim}
+ @echo off
+\end{verbatim}
+}
+
+ to
+
+{\footnotesize
+\begin{verbatim}
+echo off
+\end{verbatim}
+}
+
+
+ The batch files v.cmd, v.bat and vs.bat use the configuration file
+ lj.cnf (LJ fonts). If another configuration file is to be used, then
+ these batch files have to be changed correspondingly. If you don't have
+ the correct font files for your printer, the drivers can reduce the
+ existing font files in certain cases (marked with * in the table below;
+ loss of quality!). Gray mode is recommended for dviscr. Example:
+ Use
+
+{\footnotesize
+\begin{verbatim}
+ @p6m.cnf /ox2
+\end{verbatim}
+}
+
+ instead of
+
+{\footnotesize
+\begin{verbatim}
+ @p6l_p6m.cnf
+\end{verbatim}
+}
+
+with dviscr. A table of configuration files is given in Table
+\ref{config}.
+
+\begin{table}
+\caption{Configuration files}\label{config}
+{\small
+\centerline{\begin{tabular}{llll}
+ File name & Resolution & Fonts & Font resolution\\
+\hline
+ lj.cnf & 300 & LJ & 300\\
+ p6l.cnf & 180 & P6L & 180\\
+ p6l\_p6m.cnf *& 180 & P6M & 360x180\\
+ p6l\_p6h.cnf *& 180 & P6H & 360\\
+ p6m.cnf & 360x180 & P6M & 360x180\\
+ p6m\_p6h.cnf *& 360x180 & P6H & 360\\
+ p6h.cnf & 360 & P6H & 360\\
+ fx.cnf & 240x216 & FX & 240x216\\
+ ito.cnf & 160x144 & ITO & 160x144\\
+\end{tabular}}
+}
+\end{table}
+
+\item Justify the margins. This procedure is described in dvidrv.doc
+ under /la\#. The /la\# and /ta\# options should be put in the respective
+ prt*.cmd/bat files.
+
+\item If you're using a NEC P7, EPSON FX-100 or another wide (13.6") printer,
+ you have to modify the batch files prt*.cmd resp. prt*.bat. Examples:
+ prtfx.bat/cmd:
+
+{\footnotesize
+\begin{verbatim}
+ old: dvidot fx80 @fx.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9
+ new: dvidot fx100 @fx.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9
+\end{verbatim}
+}
+
+
+ prtlql.bat/cmd:
+
+{\footnotesize
+\begin{verbatim}
+ old: dvidot lql @p6l.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9
+ new: dvidot lqwl @p6l.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9
+\end{verbatim}
+}
+
+
+ prtp6h.bat/cmd:
+
+{\footnotesize
+\begin{verbatim}
+ old: dvidot p6h @p6h.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9
+ new: dvidot p7h @p6h.cnf /po=prn %1 %2 %3 %4 %5 %6 %7 %8 %9
+\end{verbatim}
+}
+
+
+\item Print the dvidrv manual: Install the DVIDRVMA package and
+ follow the instructions in dvidrvma.doc.
+
+\item If you need (and have) the big fonts for \SliTeX, you have to change the
+ configuration file(s) to include the extra font library file.
+ Example (lj.cnf):
+
+{\footnotesize
+\begin{verbatim}
+ old: /pl=%DVIDRVFONTS%;lj_0;lj_h;lj_1;lj_2;lj_3;lj_4;lj_5a;lj_5b
+ new: /pl=%DVIDRVFONTS%;lj_0;lj_h;lj_1;lj_2;lj_3;lj_4;lj_5a;lj_5b;lj_sli
+\end{verbatim}
+}
+
+
+\end{enumerate}
+
+
+
+\section{Further sources of information}
+
+
+The following files contain further information (dvi files can be looked at on
+the screen with a screen previewer, or printed with a printer driver):
+
+{\small
+\begin{tabbing}
+emtexdocenglishtex\=ware.docxxxxxxxxxxxxxxx\=TEX package, English)\kill
+\verb|\emtex\doc\english\texware.doc| \>\>(TEX package, English)\\
+\verb|\emtex\doc\german\texware.doc| \>\>(TEX package, German)\\
+\>Calling \TeX\ and its associated programs.\\
+\\
+\verb|\emtex\doc\germdoc.dvi| \>\>(GTEX package, German, 4 pages)\\
+\>Instructions for german.sty.\\
+\\
+\verb|\emtex\doc\english\emtex.dvi| \>\>(TEX package, English, 8 pages)\\
+\verb|\emtex\doc\german\emtex.dvi| \>\>(TEX package, German, 12 pages)\\
+\>Instructions for em\TeX.\\
+\\
+\verb|\emtex\doc\latex.bug| \>\>(LATEX package, English)\\
+\>Changes and known mistakes in \LaTeX.\\
+\\
+\verb|\emtex\doc\local.gid| \>\>(LATEX package, English)\\
+\>Ultra brief instructions for \LaTeX.\\
+\\
+\verb|\emtex\doc\local.dvi| \>\>(LATEX package, English, 20 pages)\\
+\>Implementation specific instructions for \LaTeX.\\
+\\
+\verb|\emtex\doc\lkurz.dvi| \>\>(GLATEX package, German, 46 pages)\\
+\>Brief instructions for \LaTeX\ by H.Partl.\\
+\\
+\verb|\emtex\doc\english\mfware.doc| \>\>(MF package, English)\\
+\verb|\emtex\doc\german\mfware.doc| \>\>(MF package, German)\\
+\>Calling \METAFONT\ and its associated programs.\\
+\\
+\verb|\emtex\doc\english\mfjob.doc| \>\>(MFWARE package, English)\\
+\verb|\emtex\doc\german\mfjob.doc| \>\>(MFWARE package, German)\\
+\>Instructions for the MFjob program.\\
+\\
+\verb|\emtex\doc\english\dvidrvma.doc| \>\>(DVIDRVMA package, English)\\
+\verb|\emtex\doc\german\dvidrvma.doc| \>\>(DVIDRVMA package, German)\\
+\>Instructions for printing the dvidrv manual.\\
+\\
+\verb|\emtex\doc\english\dvidrv.dvi| \>\>(DVIDRVMA package, English, 45 pp.)\\
+\verb|\emtex\doc\german\dvidrv.dvi| \>\>(DVIDRVMA package, German, 58 pages)\\
+\>Manual for the dvidrv drivers.\\
+\\
+\verb|\emtex\doc\english\dvidrv.doc| \>\>(DVIDRV package, English)\\
+\verb|\emtex\doc\german\dvidrv.doc| \>\>(DVIDRV package, German)\\
+\>Instructions for the dvidrv drivers.\\
+\>Pay special attention to the end (changes with\\
+\>respect to earlier versions).\\
+\\
+\verb|\emtex\doc\english\fontlib.doc| \>\>(DVIDRV package, English)\\
+\verb|\emtex\doc\german\fontlib.doc| \>\>(DVIDRV package, German)\\
+\>Instructions for the fontlib program.\\
+\\
+\verb|\emtex\doc\english\makedot.doc| \>\>(DVIDRV package, English)\\
+\verb|\emtex\doc\german\makedot.doc| \>\>(DVIDRV package, German)\\
+\>Provisional instructions for makedot. This is a supplement\\
+\>to dvidot.doc.\\
+\\
+\verb|\emtex\doc\web.doc|\>\>(WEB package, German)\\
+\>Calling the programs of the WEB system.\\
+\\
+\verb|\emtex\doc\english\pkedit.doc| \>\>(PKEDIT package, English)\\
+\verb|\emtex\doc\german\pkedit.doc| \>\>(PKEDIT package, German)\\
+\>Instructions for the pkedit program.\\
+\\
+\verb|\emtex\doc\english\tcman.dvi| \>\>(TEXCAD package, English, 13 pages)\\
+\verb|\emtex\doc\german\tcman.dvi| \>\>(TEXCAD package, German, 14 pages)\\
+\>The \TeXcad\ manual.\\
+\\
+\verb|\emtex\texinput\webman.tex| \>\>(WEB package, English)\\
+\>Manual for the WEB system.\\
+\\
+\verb|\emtex\texinput\makeindx.tex| \>\>(MAKEINDX package, English)\\
+\>Instructions for MakeIndx.\\
+\\
+\verb|\emtex\doc\makeindx.doc| \>\>(MAKEINDX package, English)\\
+\>Detailed instructions for MakeIndx.\\
+\\
+\verb|\emtex\doc\english\texchk.doc| \>\>(TEXWARE package, English)\\
+\verb|\emtex\doc\german\texchk.doc| \>\>(TEXWARE package, German)\\
+\>Instructions for texchk.\\
+\end{tabbing}
+}
+
+
+\section{File names in the em\protect\TeX system}
+
+
+{\small
+\begin{tabbing}
+.auxxxx\=Auxiliary file created and used by \LaTeX\kill
+.aux\>Auxiliary file created and used by \LaTeX\\
+.bak\>Backup file (fontlib, pkedit)\\
+.bas\>Fast-loading file for \METAFONT\ (no, not BASIC)\\
+.bat\>Batch file (DOS)\\
+.bbl\>Output file of \BibTeX\\
+.bgi\>Video graphics driver (used by \TeXcad)\\
+.bib\>Bibliography database for \BibTeX\\
+.blg\>Transcript file (\BibTeX)\\
+.bst\>Bibliography style for \BibTeX\\
+.bug\>List of bugs\\
+.ch\>Change file (TANGLE, WEAVE and MFT)\\
+.chr\>Readable form of a pxl file (PXtoCH and CHtoPX)\\
+.cmd\>Batch file (OS/2)\\
+.cnf\>Configuration file for dvidrv\\
+.dlg\>Transcript file (dvidrv)\\
+.doc\>Instructions (straight text) or commented sty file\\
+.dot\>Parameter file for dvidot\\
+.dvi\>Device independent output of \TeX\\
+.err\>Error messages and warnings (dvidrv)\\
+.exe\>Executable program\\
+.fli\>Font library file (dvidrv)\\
+.fmt\>Fast-loading file for \TeX\\
+.gf\>Font file created by \METAFONT\ (usually.\#gf)\\
+.gft\>Default extension for the output of GFtype\\
+.glo\>\LaTeX\ auxiliary file for \verb|glossary|\\
+.idx\>Index entries (created by \LaTeX)\\
+.ilg\>MakeIndx transcript file\\
+.ind\>Index entries (created by MakeIndx)\\
+.lof\>\LaTeX\ auxiliary file for \verb|\listoffigures|\\
+.log\>Transcript file (\TeX\ and \METAFONT)\\
+.lot\>\LaTeX\ auxiliary file for \verb|\listoftables|\\
+.mac\>\TeXcad\ macro file\\
+.mf\>Source text for a font\\
+.mfj\>Job file for MFjob\\
+.mft\>Style file for MFT\\
+.msp\>Graphic file\\
+.opt\>\TeXcad\ parameters\\
+.ovl\>Overlay\\
+.pas\>Pascal source file (TANGLE)\\
+.pcx\>Graphic file\\
+.pic\>Picture environment created by \TeXcad\\
+.pk\>Compressed font file\\
+.pkt\>Default extension for the output of PKtype\\
+.pl\>Readable form of a tfm file\\
+.poo\>String pool for INITEX or INIMF (pool file)\\
+.pxl\>Font file\\
+.rem\>Package contents listing for the remove program\\
+.sty\>Document style or document style option for \LaTeX\\
+.sub\>Font substitution file (dvidrv)\\
+.tcp\>\TeX\ code page (translation of code pages and special characters)\\
+.tex\>\TeX\ text\\
+.tfm\>Symbol widths and other properties of a font (font metrics)\\
+.toc\>Notes of \LaTeX\ for contents\\
+.ver\>List of program versions (\TeXcad)\\
+.vf\>Virtual font (dvidrv, VFtoVP, VPtoVF)\\
+.vpl\>Readable form of a vf file (VFtoVP and VPtoVF)\\
+.web\>WEB source text (TANGLE and WEAVE)\\
+.zip\>Archive file (collection of compressed files)\\
+\end{tabbing}
+}
+
+(No claim as to completeness.)
+
+
+
+\section{File list}
+\cbstart
+A complete list of files is given in \README
+\cbend
+
+\section{Fonts}
+
+\cbstart
+See \README\ for a discussion of font magnifications and names
+\cbend
+\section{License}
+
+
+emTeX may only be distributed in UNCHANGED and COMPLETE form (all zip
+files, readme.eng and readme.ger!), and only when this is done WITHOUT
+CHARGE. If you want to distribute only parts of emTeX or if you want
+to charge a small fee for handling etc., you have to contact the author.
+
+Please observe the license conditions for pkzip/pkunzip
+(see manual.doc in pkz102.exe)!
+
+Please observe the directions in {\footnotesize
+\verb|\emtex\texinput\ghyphen.min|} and
+{\footnotesize\verb|\emtex\texinput\ghyphen.max|}!
+
+Please observe the directions in {\footnotesize
+\verb|\emtex\doc\makeindx.cpy|} (see
+also
+{\footnotesize\verb|\emtex\doc\english\texware.doc|} and
+{\footnotesize\verb|\emtex\doc\german\texware.doc|})!
+
+TeXcad is Shareware. Please observe the directions in
+{\footnotesize\verb|\emtex\doc\english\tcman.dvi|}!
+
+No guarantee is made as to the proper functioning of the programs.
+No liability will be admitted for damage resulting from using the
+programs.
+
+Instead of a list: All the trademarks used in this document and all
+the other em\TeX\ documents are registered to whoever it is that owns them.
+
+
+\section{The author}
+
+
+Address:
+\begin{verse}
+ Eberhard Mattes\\
+ Teckstra\ss e 81\\
+ D-7141 M\"oglingen\\
+ Federal Republic of Germany
+\end{verse}
+
+
+Questions only by mail! No telephone calls please!
+Please inclose a self-addressed return package with postage if
+you expect a response.
+
+Electronic mail (subject to sudden change):
+
+
+{\footnotesize
+\begin{verbatim}
+ Internet: mattes@azu.informatik.uni-stuttgart.de
+\end{verbatim}
+}
+
+
+If you want support by telephone, obtain a commercial \TeX\ package.
+
+Frequently asked questions (and answers) will be found in help.eng and
+help.ger.
+
+
+
+\section{Reporting bugs}
+
+
+If you find a bug please tell the author so that it can be corrected. Please
+send the following information which is needed for the task:
+
+\begin{itemize}
+\item machine type (XT, AT, 386 etc.), CPU, BIOS, video card, printer
+ (manufacturer and model), operating system and version number
+ (note: SYSLEVEL command with OS/2). For instance:
+ AT compatible, 286, Award, Paradise VGA, DeskJet+, IBM PC-DOS 3.3 .
+
+\item the text of the autoexec.bat and config.sys in use when the error
+ occurred: if possible, with an explanation of the programs called and
+ drivers installed that are not part of the operating system.
+
+\item em\TeX\ version (date of issue)
+
+\item enough information for the error to be reproduced, if possible a disk
+ (5.25" or 3.5") containing the appropriate files (see also dvidrv.doc).
+
+\item the dvidrv log file, if the error is in a driver
+
+\item the part of the printed output which shows the error, if the error is in
+ a printer driver.
+\end{itemize}
+Please inclose a self-addressed return package with postage if
+you expect a response.
+
+
+\section{Changes from earlier versions (with regard to the installation)}
+\cbstart
+A full list of changes can be found in \README.
+\cbend
+
+
+\section{Betatest disk}
+\cbstart
+This disk contains new versions of some of the em\TeX\ packages. The
+tex386 package offers a conveniently large and fast \TeX\ (in the
+latest 3.141 version), and the new versions of the drivers with MFJOB
+provide dynamic creation of fonts.
+\begin{description}
+\item[Diskette 6]\par
+\begin{quote}
+\begin{tabbing}
+xxxxxxxxxxxxxxxxxx\=xxxxxxx\kill
+tex386b8.zip \> em\TeX\ for 386 machines (large capacity, and fast) \\
+readme.tst \> notes on beta-test files. PLEASE READ THIS!\\
+drv14s.zip \> revised versions of dvi drivers\\
+mfjob11l\> MFJOB utility to accompany new drivers\\
+\end{tabbing}
+\end{quote}
+\end{description}
+
+\section{Bonus disks from the UK \protect\TeX\ Archive}\label{bonus}
+This distribution of the em\TeX\ package by the UK \TeX\ Archive has
+been enhanced by the addition of more packages which provide some
+commonly-requested facilities. These are {\em not} as well-tested,
+packaged and documented as em\TeX\ itself, but should be useful to
+many PC-based \TeX\ users. All These packages are supplied as .zip
+archives which are unpacked in exactly the same way as the em\TeX\
+ones. A {\tt .rem} file is supplied for use with the {\tt remove}
+utility.
+
+\begin{description}
+\item[bm2font] A program to convert eg .PCX or .GIF files to \TeX\ .pk fonts
+for inclusion in \TeX\ documents without any need for special drivers.
+\item[dvips] Tom Rokicki's dvips program, to translate .dvi files to
+ PostScript. This is a reliable, sophisticated package, also
+ available for Unix, VMS and VM/CMS systems. Full documentation is in
+ the plain \TeX\ document \verb|\dvips.tex|. There are two copies of
+ the program: \verb|dvips.exe| for normal DOS use, and
+ \verb|dvipswin| for those with Microsoft Windows. Configuration files
+ are placed in \verb|\emtex\ps| and they assume that the font library
+ files or .pk files are in \verb|\texfonts\pixel.lj|. Font metric
+ files are included for all the common \PS\ fonts.
+
+ The program source for dvips is in a separate package, {\em dvipssrc}.
+\item[morebin] A selection of useful ancillary programs. Documentation
+ is provided in the \verb|emtex\doc| hierarchy.
+\begin{description}
+\item[wp2latex] WordPerfect 5.0 to \LaTeX\ translator
+\item[dvi2tty] ASCII viewer for dvi files
+\item[dviselec] Write a subset of a dvi file to a new dvi file
+\item[dvidvi] Rearrange pages of a dvi file
+\item[dviconca] Join dvi files together
+\item[dvibook] Rearrange pages of a dvi file
+\item[lacheck] Syntax checker for \LaTeX\ documents
+\end{description}
+\item[newlatex] The version of em\TeX\ is slightly out of date with
+respect to \LaTeX. This package provides new copies of all the \LaTeX\
+source files for those who wish to be totally up to date. The files
+{\em overwrite} those in \verb|\emtex\texinput|. This does {\em not}
+update your format files --- the user has to run the {\tt fmt.bat}
+batch files in eg \verb|\emtex\texfmts|.
+
+The package includes the NFSS: as part of the development of a new
+\LaTeX\ for the 1990s, this is the New Font Selection Scheme, by Frank
+Mittelbach and Rainer Sch\"opf. It replaces all the font declaration
+mechanisms in \LaTeX\ with a much more flexible system. The files are
+installed in \verb|\emtex\base\nfss| which contains documentation etc.
+A new format file is placed in \verb|\emtex\texfmts| which is called
+by a new command `newlatex'; this is a version of \LaTeX\ with the
+NFSS installed.
+
+The newlatex package also includes the other Mittelbach/Sch\"opf
+packages ({\em multicol, array, theorem, ftnright,} and {\em verbatim})
+which provide important extensions to \LaTeX. The documentation for
+these is in the source directories under \verb|emtex\base| for each
+package --- you should run \LaTeX\ on the {\tt .drv} file and print
+the result. The pre-built style files themselves have been placed in
+\verb|emtex\texinput| ready for use.
+
+\item[psnfss] This package builds on the NFSS package by providing a
+complete drop-in system for using PostScript fonts with the NFSS,
+prepared by Sebastian Rahtz. This package is installed in
+\verb|\emtex\psnfss|, with new style files in \verb|\emtex\texinput|.
+Print the documentation file \verb|psnfss.eps| before you start
+looking at this.
+\item[seminar] A comprehensive \LaTeX\ style package by Timothy van
+ Zandt to produce overhead slides, performing all the same jobs as
+ \SLiTeX, but can be used with all normal \LaTeX\ styles.
+\end{description}
+
+The packages are arranged on disk as follows:
+\begin{description}
+\item[Diskette 7]
+\begin{quote}
+\begin{tabbing}
+xxxxxxxxxxxxxxxxxx\=xxxxxxx\kill
+dvips \> dvi to postscript driver \\
+mfb1 \> betatest 386 version of \Metafont\\
+\end{tabbing}
+\end{quote}
+
+\item[Diskette 8]
+\begin{quote}
+\begin{tabbing}
+xxxxxxxxxxxxxxxxxx\=xxxxxxx\kill
+newlatex \> March 1992 versions of \LaTeX\ files\\
+\> plus all Mittelbach/Schoepf packages (inc NFSS)\\
+psnfss \> PostScript addition for New Font Selection Scheme\\
+morebin \> extra programs for use with \TeX\\
+\end{tabbing}
+\end{quote}
+\item[Diskette 9]
+\begin{quote}
+\begin{tabbing}
+xxxxxxxxxxxxxxxxxx\=xxxxxxx\kill
+bm2font \> program to generate \TeX\ fonts from graphics files\\
+seminar\> macros by Timothy van Zandt to produce slides \\
+dvipssrc \> program source of dvips driver\\
+ps2pk12 \> program to generate \TeX\ pk files from Adobe Type1 fonts
+\end{tabbing}
+\end{quote}
+\end{description}
+\cbend
+\end{document}