diff options
Diffstat (limited to 'obsolete/macros/latex209/contrib/aasmacros/art8.doc')
-rw-r--r-- | obsolete/macros/latex209/contrib/aasmacros/art8.doc | 369 |
1 files changed, 369 insertions, 0 deletions
diff --git a/obsolete/macros/latex209/contrib/aasmacros/art8.doc b/obsolete/macros/latex209/contrib/aasmacros/art8.doc new file mode 100644 index 0000000000..c97428516e --- /dev/null +++ b/obsolete/macros/latex209/contrib/aasmacros/art8.doc @@ -0,0 +1,369 @@ +% ARTICLE DOCUMENT STYLE -- Released 22 Dec 1987 +% for LaTeX version 2.09 +% Copyright (C) 1987 by Leslie Lamport + +% **************************************** +% * FONTS * +% **************************************** +% + +\lineskip 1pt % \lineskip is 1pt for all font sizes. +\normallineskip 1pt +\def\baselinestretch{1} + +% Each size-changing command \SIZE executes the command +% \@setsize\SIZE{BASELINESKIP}\FONTSIZE\@FONTSIZE +% where: +% BASELINESKIP = Normal value of \baselineskip for that size. (Actual +% value will be \baselinestretch * BASELINESKIP.) +% +% \FONTSIZE = Name of font-size command. The currently available +% (preloaded) font sizes are: \vpt (5pt), \vipt (6pt), +% \viipt (etc.), \viiipt, \ixpt, \xpt, \xipt, \xiipt, +% \xivpt, \xviipt, \xxpt, \xxvpt. +% \@FONTSIZE = The same as the font-size command except with an +% '@' in front---e.g., if \FONTSIZE = \xivpt then +% \@FONTSIZE = \@xivpt. +% +% For reasons of efficiency that needn't concern the designer, +% the document style defines \@normalsize instead of \normalsize . This is +% done only for \normalsize, not for any other size-changing commands. + +\def\@normalsize{\@setsize\normalsize{9.2pt}\viiipt\@viiipt +\abovedisplayskip 6pt plus2pt minus4pt% +\belowdisplayskip \abovedisplayskip +\abovedisplayshortskip \z@ plus2pt% +\belowdisplayshortskip 4pt plus2pt minus2pt% +\let\@listi\@listI} % Setting of \@listi added 9 Jun 87 + +\def\small{\@setsize\small{8pt}\viipt\@viipt +\abovedisplayskip 5pt plus 2pt minus 3pt% +\belowdisplayskip \abovedisplayskip +\abovedisplayshortskip \z@ plus2pt% +\belowdisplayshortskip 4pt plus2pt minus 2pt +\def\@listi{\leftmargin\leftmargini %% Added 22 Dec 87 +\topsep 4pt plus 2pt minus 2pt\parsep 2pt plus 1pt minus 1pt +\itemsep \parsep}} + +\def\footnotesize{\@setsize\footnotesize{7pt}\vipt\@vipt +\abovedisplayskip 4.5pt plus 2pt minus 3pt% +\belowdisplayskip \abovedisplayskip +\abovedisplayshortskip \z@ plus 1pt% +\belowdisplayshortskip 3pt plus 1pt minus 2pt +\def\@listi{\leftmargin\leftmargini %% Added 22 Dec 87 +\topsep 3pt plus 1pt minus 1pt\parsep 2pt plus 1pt minus 1pt +\itemsep \parsep}} + +\def\scriptsize{\@setsize\scriptsize{6pt}\vpt\@vpt} +\def\tiny{\@setsize\tiny{6pt}\vpt\@vpt} +\def\large{\@setsize\large{10.4pt}\ixpt\@ixpt} +\def\Large{\@setsize\Large{12pt}\xpt\@xpt} +\def\LARGE{\@setsize\LARGE{14pt}\xiipt\@xiipt} +\def\huge{\@setsize\huge{18pt}\xivpt\@xivpt} +\def\Huge{\@setsize\Huge{22pt}\xviipt\@xviipt} + +\normalsize % Choose the normalsize font. + + +% **************************************** +% * PAGE LAYOUT * +% **************************************** +% +% All margin dimensions measured from a point one inch from top and side +% of page. + +% SIDE MARGINS: +\if@twoside % Values for two-sided printing: + \oddsidemargin 44pt % Left margin on odd-numbered pages. + \evensidemargin 82pt % Left margin on even-numbered pages. + \marginparwidth 107pt % Width of marginal notes. +\else % Values for one-sided printing: + \oddsidemargin 63pt % Note that \oddsidemargin = \evensidemargin + \evensidemargin 63pt + \marginparwidth 90pt +\fi +\marginparsep 11pt % Horizontal space between outer margin and + % marginal note + + +% VERTICAL SPACING: + % Top of page: +\topmargin 27pt % Nominal distance from top of page to top of + % box containing running head. +\headheight 12pt % Height of box containing running head. +\headsep 25pt % Space between running head and text. +% \topskip = 10pt % '\baselineskip' for first line of page. + % Bottom of page: +\footskip 30pt % Distance from baseline of box containing foot + % to baseline of last line of text. + + + % DIMENSION OF TEXT: +% 24 Jun 86: changed to explicitly compute \textheight to avoid roundoff. +% The value of the multiplier was calculated as the floor of the +% old \textheight minus \topskip, divided by \baselineskip for \normalsize. +% The old value of \textheight was 528pt. +% \textheight is the height of text (including footnotes and figures, +% excluding running head and foot). + +\textheight = 63\baselineskip +\advance\textheight by \topskip +\textwidth 345pt % Width of text line. + % For two-column mode: +\columnsep 10pt % Space between columns +\columnseprule 0pt % Width of rule between columns. + +% A \raggedbottom command causes 'ragged bottom' pages: pages set to +% natural height instead of being stretched to exactly \textheight. + +% FOOTNOTES: + +\footnotesep 4.5pt % Height of strut placed at the beginning of every + % footnote = height of normal \footnotesize strut, + % so no extra space between footnotes. + +\skip\footins 6pt plus 4pt minus 2pt % Space between last line of text and + % top of first footnote. + +% FLOATS: (a float is something like a figure or table) +% +% FOR FLOATS ON A TEXT PAGE: +% +% ONE-COLUMN MODE OR SINGLE-COLUMN FLOATS IN TWO-COLUMN MODE: +\floatsep 8pt plus 2pt minus 2pt % Space between adjacent floats moved + % to top or bottom of text page. +\textfloatsep 12pt plus 2pt minus 4pt % Space between main text and floats + % at top or bottom of page. +\intextsep 8pt plus 2pt minus 2pt % Space between in-text figures and + % text. +\@maxsep 12pt % The maximum of \floatsep, + % \textfloatsep and \intextsep (minus + % the stretch and shrink). +% TWO-COLUMN FLOATS IN TWO-COLUMN MODE: +\dblfloatsep 8pt plus 2pt minus 2pt % Same as \floatsep for double-column + % figures in two-column mode. +\dbltextfloatsep 12pt plus 2pt minus 4pt % \textfloatsep for double-column + % floats. +\@dblmaxsep 12pt % The maximum of \dblfloatsep and + % \dbltexfloatsep. + +% FOR FLOATS ON A SEPARATE FLOAT PAGE OR COLUMN: +% ONE-COLUMN MODE OR SINGLE-COLUMN FLOATS IN TWO-COLUMN MODE: +\@fptop 0pt plus 1fil % Stretch at top of float page/column. (Must be + % 0pt plus ...) +\@fpsep 8pt plus 2fil % Space between floats on float page/column. +\@fpbot 0pt plus 1fil % Stretch at bottom of float page/column. (Must be + % 0pt plus ... ) + +% DOUBLE-COLUMN FLOATS IN TWO-COLUMN MODE. +\@dblfptop 0pt plus 1fil % Stretch at top of float page. (Must be 0pt plus ...) +\@dblfpsep 8pt plus 2fil % Space between floats on float page. +\@dblfpbot 0pt plus 1fil % Stretch at bottom of float page. (Must be + % 0pt plus ... ) +% MARGINAL NOTES: +% +\marginparpush 5pt % Minimum vertical separation between two marginal + % notes. + + +% **************************************** +% * PARAGRAPHING * +% **************************************** +% +\parskip 0pt plus 1pt % Extra vertical space between paragraphs. +\parindent 15pt % Width of paragraph indentation. +%\topsep 5pt plus 2pt minus 4pt % Extra vertical space, in addition to + % \parskip, added above and below list and + % paragraphing environments. +\partopsep 2pt plus 1pt minus 1pt % Extra vertical space, in addition to + % \parskip and \topsep, added when user + % leaves blank line before environment. +%\itemsep 2pt plus 2pt minus 1pt % Extra vertical space, in addition to + % \parskip, added between list items. +% See \@listI for values of \topsep and \itemsep +% (Change made 9 Jun 87) + +% The following page-breaking penalties are defined + +\@lowpenalty 51 % Produced by \nopagebreak[1] or \nolinebreak[1] +\@medpenalty 151 % Produced by \nopagebreak[2] or \nolinebreak[2] +\@highpenalty 301 % Produced by \nopagebreak[3] or \nolinebreak[3] + +\@beginparpenalty -\@lowpenalty % Before a list or paragraph environment. +\@endparpenalty -\@lowpenalty % After a list or paragraph environment. +\@itempenalty -\@lowpenalty % Between list items. + +% \clubpenalty % 'Club line' at bottom of page. +% \widowpenalty % 'Widow line' at top of page. +% \displaywidowpenalty % Math display widow line. +% \predisplaypenalty % Breaking before a math display. +% \postdisplaypenalty % Breaking after a math display. +% \interlinepenalty % Breaking at a line within a paragraph. +% \brokenpenalty % Breaking after a hyphenated line. + + +% **************************************** +% * SECTIONS * +% **************************************** +% + +% \secdef{UNSTARCMDS}{STARCMDS} : +% When defining a sectionioning command without using +% \@startsection, you can use \secdef as follows: +% \def\part { ... \secdef \CMDA \CMDB } +% \def\CMDA [#1]#2{ ... } % Command to define \part[...]{...} +% \def\CMDB #1{ ... } % Command to define \part*{...} + +\def\part{\par % New paragraph + \addvspace{4ex} % Adds vertical space above title. + \@afterindentfalse % Suppresses indent in first paragraph. Change + \secdef\@part\@spart} % to \@afterindenttrue to have indent. + +\def\@part[#1]#2{\ifnum \c@secnumdepth >\m@ne % IF secnumdepth > -1 + \refstepcounter{part} % THEN step part counter + \addcontentsline{toc}{part}{\thepart % add toc line + \hspace{1em}#1}\else % ELSE add unnumbered line + \addcontentsline{toc}{part}{#1}\fi % FI + { \parindent 0pt \raggedright + \ifnum \c@secnumdepth >\m@ne % IF secnumdepth > -1 + \Large \bf Part \thepart % THEN Print 'Part' and + \par \nobreak % number in \Large boldface. + \fi % FI + \huge \bf % Select \huge boldface. + #2\markboth{}{}\par } % Print title and set heading marks null. + \nobreak % TeX penalty to prevent page break. + \vskip 3ex % Space between title and text. + \@afterheading % Routine called after part and + } % section heading. + +% Heading for \part* command +\def\@spart#1{{\parindent 0pt \raggedright + \huge \bf + #1\par} % Title. + \nobreak % TeX penalty to prevent page break. + \vskip 3ex % Space between title and text. + \@afterheading % Routine called after part and + } % section heading. + +% \@startsection {NAME}{LEVEL}{INDENT}{BEFORESKIP}{AFTERSKIP}{STYLE} +% optional * [ALTHEADING]{HEADING} +% Generic command to start a section. +% NAME : e.g., 'subsection' +% LEVEL : a number, denoting depth of section -- i.e., section=1, +% subsection = 2, etc. A section number will be printed if +% and only if LEVEL < or = the value of the secnumdepth +% counter. +% INDENT : Indentation of heading from left margin +% BEFORESKIP : Absolute value = skip to leave above the heading. +% If negative, then paragraph indent of text following +% heading is suppressed. +% AFTERSKIP : if positive, then skip to leave below heading, +% else - skip to leave to right of run-in heading. +% STYLE : commands to set style +% If '*' missing, then increments the counter. If it is present, then +% there should be no [ALTHEADING] argument. A sectioning command +% is normally defined to \@startsection + its first six arguments. + +\def\section{\@startsection {section}{1}{\z@}{-3.5ex plus -1ex minus + -.2ex}{2.3ex plus .2ex}{\Large\bf}} +\def\subsection{\@startsection{subsection}{2}{\z@}{-3.25ex plus -1ex minus + -.2ex}{1.5ex plus .2ex}{\large\bf}} +\def\subsubsection{\@startsection{subsubsection}{3}{\z@}{-3.25ex plus +-1ex minus -.2ex}{1.5ex plus .2ex}{\normalsize\bf}} +\def\paragraph{\@startsection + {paragraph}{4}{\z@}{3.25ex plus 1ex minus .2ex}{-1em}{\normalsize\bf}} +\def\subparagraph{\@startsection + {subparagraph}{4}{\parindent}{3.25ex plus 1ex minus + .2ex}{-1em}{\normalsize\bf}} + + +% Default initializations of \...mark commands. (See below for their +% us in defining page styles. +% + +% \def\sectionmark#1{} % Preloaded definitions +% \def\subsectionmark#1{} +% \def\subsubsectionmark#1{} +% \def\paragraphmark#1{} +% \def\subparagraphmark#1{} + +% The value of the counter secnumdepth gives the depth of the +% highest-level sectioning command that is to produce section numbers. +% + +\setcounter{secnumdepth}{3} + +% APPENDIX +% +% The \appendix command must do the following: +% -- reset the section and subsection counters to zero +% -- redefine the section counter to produce appendix numbers +% -- redefine the \section command if appendix titles and headings are +% to look different from section titles and headings. + +\def\appendix{\par + \setcounter{section}{0} + \setcounter{subsection}{0} + \def\thesection{\Alph{section}}} + + +% **************************************** +% * LISTS * +% **************************************** +% + +% The following commands are used to set the default values for the list +% environment's parameters. See the LaTeX manual for an explanation of +% the meanings of the parameters. Defaults for the list environment are +% set as follows. First, \rightmargin, \listparindent and \itemindent +% are set to 0pt. Then, for a Kth level list, the command \@listK is +% called, where 'K' denotes 'i', 'ii', ... , 'vi'. (I.e., \@listiii is +% called for a third-level list.) By convention, \@listK should set +% \leftmargin to \leftmarginK. +% +% For efficiency, level-one list's values are defined at top level, and +% \@listi is defined to set only \leftmargin + +\leftmargini 2.5em +\leftmarginii 2.2em % > \labelsep + width of '(m)' +\leftmarginiii 1.87em % > \labelsep + width of 'vii.' +\leftmarginiv 1.7em % > \labelsep + width of 'M.' +\leftmarginv 1em +\leftmarginvi 1em + +\leftmargin\leftmargini +\labelsep 5pt +\labelwidth\leftmargini\advance\labelwidth-\labelsep +% \parsep 2pt plus 2pt minus 1pt (Removed 9 Jun 87) + +% \@listI defines top level and \@listi values of +% \leftmargin, \topsep, \parsep, and \itemsep +% (Added 9 Jun 87) +\def\@listI{\leftmargin\leftmargini \parsep 2pt plus 2pt minus 1pt% +\topsep 5pt plus 2pt minus 4pt% +\itemsep 2pt plus 2pt minus 1pt} + +\let\@listi\@listI +\@listi + +\def\@listii{\leftmargin\leftmarginii + \labelwidth\leftmarginii\advance\labelwidth-\labelsep + \topsep 2pt plus 2pt minus 1pt + \parsep 2pt plus 1pt minus 1pt + \itemsep \parsep} + +\def\@listiii{\leftmargin\leftmarginiii + \labelwidth\leftmarginiii\advance\labelwidth-\labelsep + \topsep 2pt plus 1pt minus 1pt + \parsep \z@ \partopsep 1pt plus 0pt minus 1pt + \itemsep \topsep} + +\def\@listiv{\leftmargin\leftmarginiv + \labelwidth\leftmarginiv\advance\labelwidth-\labelsep} + +\def\@listv{\leftmargin\leftmarginv + \labelwidth\leftmarginv\advance\labelwidth-\labelsep} + +\def\@listvi{\leftmargin\leftmarginvi + \labelwidth\leftmarginvi\advance\labelwidth-\labelsep} + |