summaryrefslogtreecommitdiff
path: root/macros/latex/contrib/sffms/sffms.dtx
diff options
context:
space:
mode:
Diffstat (limited to 'macros/latex/contrib/sffms/sffms.dtx')
-rw-r--r--macros/latex/contrib/sffms/sffms.dtx1287
1 files changed, 1287 insertions, 0 deletions
diff --git a/macros/latex/contrib/sffms/sffms.dtx b/macros/latex/contrib/sffms/sffms.dtx
new file mode 100644
index 0000000000..9e2edb78d9
--- /dev/null
+++ b/macros/latex/contrib/sffms/sffms.dtx
@@ -0,0 +1,1287 @@
+% \iffalse meta-comment
+%
+% Copyright 2002-2003 M. C. DeMarco
+% Also copyright any individual authors listed in this file.
+%
+% This file provides the latex class sffms.cls and supporting files.
+% ------------------------------------------------------------------
+%
+% It may be distributed and/or modified under the conditions of the
+% LaTeX Project Public License, either version 1.2 of this license or
+% (at your option) any later version.
+% The latest version of this license is in
+% http://www.latex-project.org/lppl.txt
+% and version 1.2 or later is part of all distributions of LaTeX
+% version 1999/12/01 or later.
+%
+% ** To produce the package documentation, run latex on this file. **
+%
+% \fi
+%
+% \iffalse
+%<*driver>
+\documentclass{ltxdoc}
+ \OnlyDescription % Comment out to print the code as well
+\begin{document}
+ \title{The \textsf{sffms} package}
+ \author{M. C. DeMarco\\
+ \texttt{mcd@sdf.lonestar.org}}
+ \date{2003/03/13}
+ \maketitle
+ \DocInput{sffms.dtx}
+\end{document}
+%</driver>
+% \section{Identification}
+% \begin{macrocode}
+%<sffms>\NeedsTeXFormat{LaTeX2e}
+%<sffms>\ProvidesClass{sffms}[2003/03/13 v2.0
+%<smart>\ProvidesPackage{sffsmart}[2001/09/10 v1.0
+%<dumb>\ProvidesPackage{sffdumb}[2001/09/23 v1.1
+%<sffms> The SF/F manuscript class]
+%<smart|dumb> Quotation mark utility for sffms.cls]
+% \end{macrocode}
+% \fi
+%
+% \changes{v0.1}{2001/08/29}{Created sffms.cls from sfms.cls by Kevin
+% Russell}
+% \changes{v0.1}{2001/08/29}{Passed all options to report.cls, making
+% the non-submission format mostly transparent. The only additions
+% were real typeset scene breaks (a blank line) and real book
+% headers (author and title on facing pages) for the twoside option.}
+% \changes{v0.1}{2001/08/29}{Changed the commands slightly, gave most
+% of them default values, and added commands for user configuration
+% of the scene separator and ``The End''.}
+% \changes{v0.1}{2001/08/29}{Reredefined chapter so that chapter*
+% works in submissions, changed fancyheader calls to non-deprecated
+% versions.}
+% \changes{v0.1}{2001/08/29}{Added rudimentary documentation to the
+% class file.}
+% \changes{v0.2}{2001/09/02}{Added the magic command from ulem.sty to
+% change boldface (\bf) to squiggly lines in submission format}
+% \changes{v0.2}{2001/09/02}{Added quote smartening option (using
+% quote.sty), novel option and notitle option}
+% \changes{v0.2}{2001/09/02}{Fixed the a4paper option, I hope}
+% \changes{v0.2}{2001/09/02}{Added the ifsubmission command to mask
+% fancy markup (and text)}
+% \changes{v0.2}{2001/09/02}{Added the synopsis environment for book
+% synopses}
+% \changes{v0.2}{2001/09/02}{Changed spacing to 1.83 and neatened the
+% code}
+% \changes{v0.3}{2001/09/04}{Added quote dumbing option}
+% \changes{v0.3}{2001/09/04}{Ported sffms.cls and support files to
+% dtx file, added more documentation}
+% \changes{v0.3}{2001/09/04}{Switched from doublespace package to
+% setspace}
+% \changes{v1.0}{2001/09/10}{Improved documentation}
+% \changes{v1.0}{2001/09/10}{Reworked submission title page spacing and
+% added the disposable command}
+% \changes{v1.1}{2001/09/23}{Cut back on non-submission formatting}
+% \changes{v1.1}{2001/09/23}{Fixed spacing for ``The End''}
+% \changes{v1.1}{2001/09/23}{Quote spacing fixed and code for sffdumb
+% improved, thanks to Donald Arsenault and Martin Vaeth}
+% \changes{v1.2}{2002/03/17}{Added documentation}
+% \changes{v1.2}{2002/03/17}{Code cleanup, thanks to Daniel Richard G.}
+% \changes{v1.2}{2002/03/17}{Added submit, nosubmit and msheading
+% commands}
+% \changes{v1.3}{2002/03/17}{Double underline for textsc}
+% \changes{v1.3}{2002/03/18}{Added undocumented command pageofpages}
+% \changes{v1.3}{2002/03/18}{Made a rough automatic word count}
+% \changes{v1.3}{2002/03/23}{Fixed automatic word count}
+% \changes{v1.3}{2002/03/23}{Hid some internal defs and cleaned up code}
+% \changes{v1.3}{2002/03/23}{Documented LaTeX spacing commands}
+% \changes{v2.0}{2003/03/13}{Removed dependencies on ifthen and geometry
+% packages, made geometry an option}
+% \changes{v2.0}{2003/03/13}{Added baen, daw and wotf options}
+% \changes{v2.0}{2003/03/13}{Added troubleshooting section, a table of
+% contents, and various other improvements to the documentation}
+%
+%
+% \newcommand{\DescribeOption}[1]{\DescribeEnv{[#1]}}
+%
+% \begin{abstract}\noindent
+% Documentation for |sffms|, a \LaTeX\ class for typesetting fiction
+% manuscripts in the standard formats used in science-fiction/fantasy
+% publishing.
+% \end{abstract}
+%
+% \noindent
+% This \LaTeX\ class was modified from |sfms.cls|, copyright Kevin Russell
+% 2000, under the terms of the \LaTeX\ Project Public License.
+% The file |sffms.dtx| may be redistributed and/or modified under the
+% terms of the \LaTeX\ Project Public License, distributed from CTAN
+% archives in the directory macros/latex/base/lppl.txt---either
+% version 1.2 of the License, or any later version.
+%
+%
+% \newif\ifmulticols
+% \IfFileExists{multicol.sty}{\multicolstrue}{}
+% \ifmulticols
+% \addtocontents{toc}{%
+% \protect\setlength{\columnsep}{3pc}%
+% \protect\begin{multicols}{2}}
+% \fi
+% {\parskip 0pt
+% \tableofcontents
+% }
+%
+% \section{About {\tt sffms}}
+%
+% The |sffms| package produces a double-spaced manuscript in a 12-point
+% monospaced font with one-inch margins and running headers of the form
+% |Author/TITLE/n|, where |n| is the current page number.
+% On the title page, the author's name and address appear in the upper
+% left corner, the word count and an optional note that the manuscript
+% is disposable in the upper right, and the title and author in the
+% center of the page. For a short story, the text begins four lines
+% below, and for a novel, on the next page. Some publisher-specific
+% variants of the format are also supported.
+%
+% Other features of |sffms| include an optional single-spaced synopsis,
+% automatic conversion of italics, boldface, and small caps to
+% appropriately underlined text, and a rough automatic word count.
+% Simply by including the |nonsubmission| option,
+% the same document may be typeset in \LaTeX's usual professional
+% way. The non-submission format can be customized without
+% affecting the appearance of the version for submission, allowing
+% the user to print both camera-ready copies and submission
+% manuscripts from a single story file.
+%
+% The \LaTeX\ document preparation system is free and available for
+% all operating systems. This package and all supporting packages
+% are available from \textsc{ctan}. To obtain any recent version of
+% |sffms|, copies of the supporting packages, sample input and output
+% files, a list of known issues, and more information about manuscript
+% format, see |http://mcd.freeshell.org/|. If you still have questions
+% or suggestions after reading through this documentation, feel free to
+% email the author at |mcd@sdf.lonestar.org|.
+%
+% \section{Getting Started}
+%
+% If you are already familiar with \LaTeX, you may wish to skip
+% this section.
+%
+% \subsection{Installing \LaTeX}
+%
+% \LaTeX\ is available for all operating systems, in a bewildering
+% variety of implementations. For the beginner, I recommend the
+% following popular combinations of an underlying \TeX\ engine and
+% a nice front-end and/or text editor:
+%
+% For Windows, MiKTeX (|www.miktex.org|) and WinEdt (|www.winedt.com|).
+%
+% For MacOS X, TeXLive-teTeX and TeXShop (both available at \\
+% |www.uoregon.edu/~koch/texshop/texshop.html|).
+%
+% For MacOS 9 and below, OzTeX and Alpha. (See
+% |www.esm.psu.edu/mac-tex/| for links.)
+%
+% For Unix systems, emacs and \TeX\ should come pre-installed, but
+% you might want to look into teTeX (|www.tug.org/tetex|).
+%
+% Some of these packages use A4 as their default paper size. See the
+% Troubleshooting section for more details.
+%
+% \subsection{Installing {\tt sffms}}
+%
+% If you use a \TeX\ package management system to install |sffms|, you
+% need not follow the rest of the steps in this section, but you will
+% probably need to install the supporting packages listed below.
+% Be sure that you get the most recent version of |sffms|. The
+% version can be identified either by the date or the version
+% number.
+%
+% The |sffms| class is distributed as two files, |sffms.dtx| and
+% |sffms.ins|.
+% To install the class manually, run \LaTeX\ on |sffms.ins|.
+% You can do this either by opening |sffms.ins| in your front-end
+% (WinEdt or TeXShop) and hitting the \LaTeX\ button,
+% or by typing the following at the command line:
+%\begin{verbatim}
+%latex sffms.ins
+%\end{verbatim}
+% \LaTeX\ will automatically create the style files
+% |sffms.cls|, |sffsmart.sty| and |sffdumb.sty|. At this point,
+% you may either move the new files into the appropriate directory
+% of your \LaTeX\ distribution, or leave them in the directory
+% where your source files (stories) will be.
+%
+% The |sffms| class requires several supplemental style files which
+% may or may not be included in your \LaTeX\ or |sffms| distribution.
+% Try running a sample story file through \LaTeX\ (see below).
+% If \LaTeX\ asks for any of the following files, you will need
+% to download them and place them in the directory where you put
+% |sffms.cls|. The files are:
+%\begin{verbatim}
+%fancyhdr.sty
+%setspace.sty
+%ulem.sty
+%\end{verbatim}
+% As of version 2.0 of |sffms|, the |geometry| package is no longer
+% required. If you decide to use it, obtain |geometry.dtx| and
+% |geometry.ins| and latex the latter, as you did with |sffms.ins|.
+%
+% All of the files mentioned above
+% are available through {\sc ctan} (|www.ctan.org|).
+%
+%
+% \subsection{Using {\tt sffms}}
+%
+% All you need to use |sffms| is a plain text file with the following
+% contents:
+%\begin{verbatim}
+%\documentclass{sffms}
+%\author{Lois McMaster Bujold}
+%\title{Komarr}
+%\begin{document}
+%Your story goes here.
+%\end{document}
+%\end{verbatim}
+%
+% Call this source file |filename.tex| and latex it by typing
+%\begin{verbatim}
+%latex filename.tex
+%latex filename.tex
+%\end{verbatim}
+% \LaTeX\ should be run twice in order to get the correct word count.
+%
+% Depending on your \LaTeX\ installation, this command may produce
+% an output file in |dvi|, |ps|, or |pdf| format. If you prefer |pdf|
+% output, you may find it more convenient to use the |pdflatex| command.
+%
+%
+% \subsection{\LaTeX\ Basics}
+%
+% A \LaTeX\ file is essentially a text file. If you take a plain
+% text version of your story and insert the lines mentioned in the
+% previous section (|\documentclass|, {\em etc.}), it will be almost
+% ready for \LaTeX. Just keep the following requirements in mind:
+%
+% Paragraphs should be separated by a blank line.
+%
+% Use |-| for a hyphen, |--| for an en-dash (for ranges, like
+% 18--65), and |---| for an em-dash---the one used as punctuation.
+%
+% Normal \LaTeX\ ``smart
+% quotes'' are produced using a pair of accents (usually found
+% under the $\sim$ key) and a pair of
+% apostrophes, like so: |``smart quotes''|. A good \LaTeX\ editor
+% ({\it e.g.}, emacs) will insert smart quotes automatically when
+% you strike the dumb quote (|"|) key. You may also use dumb
+% quotes with |sffms|---see the section on handling quotation
+% marks, below. Note that |```| becomes ``\thinspace`. To produce
+% `\thinspace{``} instead, use braces, like so: |`{``}|. Likewise,
+% use |'{''}| if |'''| fails to do the job.
+%
+% Certain characters are reserved by \LaTeX\ for special purposes:
+%\begin{verbatim}
+%# $ % & ~ _ ^ \ { }
+%\end{verbatim}
+% To use a reserved character in a story, you must put a backslash
+% in front of it (|\$|, |\%|, {\em etc.}), except for |\\|, |\~|,
+% and |\^|, which have their own special meanings.
+% (The first is used to force a line break and the latter two
+% create accent marks over the following character.)
+% The command |$\backslash$| produces the backslash itself and
+% |$\sim$| the tilde alone.
+%
+% The percent-sign is particularly dangerous because it's the
+% comment character in \LaTeX. Anything between an unescaped |%|
+% and the end of the line will be silently ignored by \LaTeX\
+% when it processes your file.
+%
+%\subsection{\LaTeX\ Tricks}
+%
+% Depending on your \LaTeX\ installation, you may be able to produce some
+% common accent marks thus:
+%\begin{center}
+% \'{a}~~|\'{a}| \hfill \`{e}~~|\`{e}| \hfill \"{\i}~~|\"{\i}| \hfill
+% \~{o}~~|\~{o}| \hfill \^{u}~~|\^{u}| \hfill \c{c}~~|\c{c}|
+%\end{center}
+%If you want something a little more alien, try some of the following:
+%\begin{verbatim}
+%\.{h} \^{m} \u{n} \v{q} \H{r} \d{v} \b{x}
+%\i \j \ae \OE \l \o \ss \S ?` !` \pounds
+%\end{verbatim}
+% Many more symbols are available in \LaTeX's math mode, but keep in
+% mind that such gimmicks are likely to annoy your editor.
+%
+% If you need finer control of your text layout, you can use the
+% |\noindent| command before a paragraph to keep it from
+% being indented. You can use the |\\| symbol to force a line
+% break without starting a new paragraph. (These two methods will have
+% the same effect for submissions, but not in |nonsubmission| mode.)
+%
+% \LaTeX\ ignores all extra spaces between words and sentences, then
+% inserts (approximately) two spaces between sentences. If you
+% prefer one space after all punctuation, include the command
+%\begin{verbatim}
+%\frenchspacing
+%\end{verbatim}
+% at the beginning of your document. To force a single space in
+% those rare cases where \LaTeX\ chooses the wrong spacing, use
+% |\ | (a backslash followed by a space) or |~|.
+%\begin{verbatim}
+%``Put only one space after a quote!''\ she demanded.
+%
+%``Of course, Dr.~Jones!''
+%\end{verbatim}
+% The |~| also prevents a linebreak from occurring between the two
+% words. Use it with caution.
+%
+% All \LaTeX\ commands begin with a backslash, as in
+% |\documentclass{sffms}| or |\frenchspacing|. \LaTeX\ environments
+% begin with a |\begin| command and end with an |\end| command.
+% Two \LaTeX\ environments that may be of use are
+% |verse| and |quotation|:
+%\begin{verbatim}
+%\begin{verse}
+%First line of your verse,\\
+%Second line\\
+%Third line
+%
+%Beginning of a new stanza\\
+%Etc.
+%\end{verse}
+%\end{verbatim}
+%
+%\begin{verbatim}
+%\begin{quotation}
+%Put normal paragraphs of text here, separated by blank lines as usual.
+%They will be indented from the margins, and each paragraph will
+%be indented.
+%\end{quotation}
+%\end{verbatim}
+% Long quotes or verse can be single-spaced, but by default they are
+% not. See the section
+% on environments for details. Underlining and boldface are also
+% discussed in a later section.
+%
+%
+% \section{Declaration of Options}
+%
+% The |sffms| class has several {\em options} which change the
+% appearance of the output. To use an option, enclose it in
+% brackets in the |documentclass| declaration in the first line
+% of your story file. Separate multiple options with commas.
+% For example, to use the |novel| and |baen| options, the first line
+% of the file should read:
+%\begin{verbatim}
+%\documentclass[novel,baen]{sffms}
+%\end{verbatim}
+%
+% \subsection{The Submission Options}
+%
+%\DescribeOption{submission}
+% The |submission| option is now the default and need not be
+% declared. This option causes the document to be typeset in
+% manuscript format, with double spacing, one-inch margins,
+% and a fixed-width font. All |sffms|
+% options except |nonsubmission| may be used with the submission
+% option, though |submission| plus |notitle| will make the output
+% format nonstandard. (Editors want titles.)
+%
+%\DescribeOption{novel}
+% There isn't much difference between a novel and a short story in
+% sf/f manuscripts. The short story begins on the title page,
+% while the novel begins on a fresh page. A novel may also have a
+% synopsis.
+% Use the |novel| option for a novel. If the |novel| option is
+% {\em not\/} used, the text will be typeset as a short story.
+%
+% The |sffms| class now includes publisher-specific options for
+% certain publishers whose
+% requirements differ slightly from the default |submission| style.
+% In all other respects, the story is treated as a normal submission.
+% Publishers' guidelines may change, so check that these options do
+% what you need them to do before using them.
+%
+%\DescribeOption{baen}
+% The |baen| option uses $1\,\frac{1}{2}$|"| margins rather than 1|"|.
+% Baen Books' requirements are available on-line (|www.baen.com/FAQS.htm|).
+%\begin{verbatim}
+%\documentclass[baen]{sffms}
+%\end{verbatim}
+%
+%\DescribeOption{daw}
+% The |daw| option typesets the address and wordcount on the
+% right-hand side of the first page rather than splitting it across
+% the page. The DAW Books manuscript requirements are available
+% on-line\\
+% (|www.penguinputnam.com/static/packages/us/about/dawsub.htm|).
+%\begin{verbatim}
+%\documentclass[daw]{sffms}
+%\end{verbatim}
+%
+%\DescribeOption{wotf}
+% The |wotf| option uses a full cover page (like that of the novel
+% option) and alters the running header to omit the author's surname,
+% as required by the rules of the Writers of the Future contest
+% (|www.writersofthefuture.com|).
+% Also, the full title is used in the running header, and page
+% numbering begins with the first story page, rather than
+% counting the title page.
+%\begin{verbatim}
+%\documentclass[wotf]{sffms}
+%\end{verbatim}
+%
+% To my knowledge, the default submission format does not violate
+% the guidelines of Tor Books (|www.tor.com/torfaq.html|),\\
+% Analog (|www.analogsf.com/information/submissions.shtml|),\\
+% Asimov's (|www.asimovs.com/info/guidelines.shtml|),\\
+% Fantasy \& Science Fiction (|www.sfsite.com/fsf/glines.htm|),
+% or the Star Trek Strange New Worlds contest.
+%
+% Please be sure to include all required contact information within
+% the |address| command, described below.
+%
+%
+% \subsection{Options for Quotation Marks}
+%
+% The |sffms| class provides two options for handling ``legacy''
+% quotes, be they dumb quotes in a plain text file you want
+% smartened up for a good copy of your latest novel, or \LaTeX\
+% quotes you want to dumb down to give your manuscript that
+% genuine Courier 12-point typewriter feel.
+%
+% Please note that neither of these options will handle
+% non-{\sc ascii} ``smart'' quotation marks in your source file.
+% All non-{\sc ascii} characters must be eliminated by saving
+% the file as plain text. Note that the changes explained below
+% appear in the output only---the source file is never
+% altered.
+%
+%\DescribeOption{smart}
+% The |smart| option turns pairs of normal {\sc ascii}
+% quotation marks (|"|dumb quotes|"|) into \LaTeX\ quotation
+% marks (|``|smart quotes|''|), so that the output file
+% will show true ``smart quotes.'' This option also correctly handles
+% quotations continued between paragraphs.
+%
+%\DescribeOption{dumb}
+% The |dumb| option suppresses \LaTeX\ |``|smart quotes,|''|
+% producing dumb, typewriter-style quotes in the output file
+% rather than the slanted ones that are the default in
+% submission mode.
+% The |dumb| option is not useful with the |nonsubmission|
+% option because only monospaced fonts like Courier include
+% a true dumb quotation mark (|"|) at all.
+% Other fonts may substitute a curly close-quote ('') instead,
+% which looks ''dumber than dumb.''
+%
+% These options are not particularly robust, so they may cause more
+% problems than they solve. {\em Caveat emptor}.
+% They can handle mixed quotation mark styles (\LaTeX\ smart with
+% {\sc ascii} dumb) if the two sorts of marks are balanced---for
+% example, if some chapters use {\sc ascii} quotes and others
+% \LaTeX\ ones, or even if some sentences are smart and others
+% dumb.
+%
+% If these options do not work for you, you can always
+% change the quotation marks in your source file with a good text
+% editor like emacs.
+%
+%
+% \subsection{Non-submission Options}
+%
+%\DescribeOption{nonsubmission}
+% To force a document to be typeset as a normal book or article
+% (that is, without double-spacing or the fixed-width font), use the
+% |nonsubmission| option in your |documentclass| declaration:
+%\begin{verbatim}
+%\documentclass[nonsubmission]{sffms}
+%\end{verbatim}
+%
+%\DescribeOption{notitle}
+% When the |nonsubmission| option is chosen, the |sffms|
+% class creates a default title page. The |notitle| option will
+% remove it, allowing the user to specify his own \LaTeX\ layout;
+% |notitle| is also useful for saving paper.
+%
+% Because |sffms| is based on the standard \LaTeX\ report class, any
+% other \LaTeX\ report class options may be used for non-submissions,
+% including font size
+% options (|10pt|, |12pt|, {\em etc.}), paper size and other useful
+% typesetting options (|twoside|, |twocolumn|, {\em etc.}). Using
+% report-class options together with a |submission| option may
+% generate unexpected results.
+%
+% \subsection{Other Options}
+%
+%\DescribeOption{courier}
+% The |courier| option switches to a 12-point, 10-pitch Courier font
+% that may look better than \LaTeX's default monospaced font,
+% depending on your local \LaTeX\ setup. Try this option if you want
+% a fatter font than the default or if your |pdf| files are looking
+% grainy.
+%
+%\DescribeOption{geometry}
+% The |geometry| option forces |sffms| to use the |geometry| package
+% for page layout. This option is useful for getting around
+% page size problems. See the Troubleshooting section for
+% details.
+%
+%\DescribeOption{a4paper}
+%\DescribeOption{letterpaper}
+% If you use geometry with the intent of fixing your papersize,
+% you should declare the desired paper size explicitly.
+% A4 and letter are the most common choices, but other
+% paper sizes may also be used. See the documentation of
+% the geometry package for the full list.
+%
+%
+% \section{Commands}
+%
+% \subsection{Title}
+%
+%
+%\DescribeMacro\title
+% Every story should have a title. You must specify the title
+% using the \LaTeX\ |title| command thus:
+%\begin{verbatim}
+%\title{The Hobbit: or There and Back Again}
+%\end{verbatim}
+%
+%\DescribeMacro\runningtitle
+% In |submission| format, a short form of
+% the title is placed in the page header at the top right of
+% each page.
+% If your title is long, specify the desired short form thus:
+%\begin{verbatim}
+%\runningtitle{The Hobbit}
+%\end{verbatim}
+% If you fail to provide a |runningtitle|, your |title| will be
+% used instead, no matter how long it is.
+%
+% \subsection{Author}
+%
+%\DescribeMacro\author
+% Every story must also have an author. The name included in the
+% \LaTeX\ |author| command is used in the bylines on the title
+% page and synopsis page.
+% If you use a pseudonym, you may wish to put it here.
+%\begin{verbatim}
+%\author{Lois McMaster Bujold}
+%\end{verbatim}
+%
+%\DescribeMacro\authorname
+% A separate command, |authorname|, is provided for use with
+% your mailing address. It might be wise to put your real name
+% here. If you omit the |authorname| command, the value of
+% |author| will be used with your mailing address.
+%\begin{verbatim}
+%\authorname{Lois Bujold}
+%\end{verbatim}
+%
+%\DescribeMacro\surname
+% Like |runningtitle|, |surname| is used in page headers. Whose
+% surname goes in |surname| is up to you.
+%\begin{verbatim}
+%\surname{Bujold}
+%\end{verbatim}
+% If you omit |surname|, the full value of |author| will be used.
+%
+% \subsection{Other Information}
+%
+%\DescribeMacro\address
+% Your mailing address for the title page is specified with
+% the |address| command. Separate lines with the \LaTeX\
+% linebreak symbol |\\| thus:
+%\begin{verbatim}
+%\address{One Vor Way\\
+% Vor. Surleau\\
+% VKD 28945}
+%\end{verbatim}
+% Other requested contact information (such as a phone number
+% or email address) should be included here.
+%
+%\DescribeMacro\wordcount
+% Your word count should also be included on the title page.
+% An approximate word count based on the number of pages will
+% appear automatically. However, the automatic word count is
+% not rounded off (much) and ought to be replaced by your own
+% rounded-up opinion of the word count. The |\wordcount| command
+% is used to set the value manually thus:
+%\begin{verbatim}
+%\wordcount{85,000}
+%\end{verbatim}
+% The automatic word count is generated by multiplying the page
+% count (not including a novel synopsis) by either 250 or 295,
+% depending on the font pitch and margin size. The latter
+% figure was obtained by taking a typical page of one of the
+% author's stories, finding the average number of characters
+% per line (71), dividing by six (a ``word''), multiplying by
+% the number of lines on a full page (25), and rounding off.
+% You may wish to repeat this process or a similar one for your
+% own stories, since a4 paper and partial pages (among other
+% things) were not taken into account.
+%
+%\DescribeMacro\disposable
+% The |disposable| command causes the words ``Disposable Copy''
+% to be printed under the word count on the title page of
+% submissions.
+%
+% \subsection{Sectioning Commands}
+%
+%\DescribeMacro\newscene
+% For short stories, the only breaks should be scene breaks.
+% Place the |newscene| command wherever you want a scene break.
+%\begin{verbatim}
+%...the last few words of the previous scene.
+%
+%\newscene
+%
+%Time to start a new scene...
+%\end{verbatim}
+% This command inserts the proper scene break character, a
+% centered hash mark (|#|), in
+% submissions, and a blank line in non-submissions.
+%
+%\DescribeMacro\sceneseparator
+% If you would prefer to use a different scene separator, such
+% as |*****|, the |sceneseparator| command will change it.
+%\begin{verbatim}
+%\sceneseparator{$\star\star\star\star\star$}
+%\end{verbatim}
+% Beware of \LaTeX\ special characters when using this command.
+%
+%\DescribeMacro\chapter
+% For a novel, you can use both chapters and scenebreaks. The
+% \LaTeX\ chapter commands have been redefined in |sffms| to
+% fit the |submission| format. Begin a new chapter thus:
+%\begin{verbatim}
+%\chapter{Miles High}
+%\end{verbatim}
+%\DescribeMacro{\chapter*}
+% The \LaTeX\ |\chapter*| command also works in submissions.
+% It creates an unnumbered chapter, such as a preface or
+% appendix.
+%\begin{verbatim}
+%\chapter*{Preface}
+%\end{verbatim}
+%
+%\DescribeMacro\thirty
+% Last, but not least, comes the end. The default
+% end-of-story symbol, five hash marks (|# # # # #|), is inserted
+% automatically at the end of your story. To change it, use the
+% |thirty| command.
+%\begin{verbatim}
+%\thirty{The End}
+%\end{verbatim}
+%
+% \subsection{Italics, Boldface and Small Caps}
+%
+% In submission mode, italicized text is automatically converted
+% to underlined text. Boldface is replaced
+% by wavy underlining and small caps by double underlining.
+%
+%\DescribeMacro\em
+% The |\em| command may be used for single italicized words; it
+% goes inside the braces with the word, thus:
+%\begin{verbatim}
+%I can't believe that {\em you}, of all people...
+%\end{verbatim}
+% This produces underlining by default and italics in
+% non-submissions.
+%\DescribeMacro\emph
+% To underline (italicize) anything from a word to a paragraph,
+% use the |\emph| command. With |\emph|, the curly braces come
+% after the command.
+%\begin{verbatim}
+%\emph{I can't believe that they, of all people...}
+%\end{verbatim}
+%\DescribeMacro\thought
+% The |\thought| command works exactly like |\emph|, but may
+% be useful to the author for distinguishing between normal
+% italics and italicized thoughts within the source file.
+% To italicize more than one paragraph, use one |\emph|
+% or |\thought| per paragraph.
+%
+%\DescribeMacro\bfseries
+%\DescribeMacro\textbf
+% The |\bfseries| font declaration and the |\textbf| font command
+% will produce boldface in
+% non-submissions and wavy underlines in |submission| mode. The
+% font declaration goes inside the curly braces and the font
+% command outside, thus:
+%\begin{verbatim}
+%I can't believe that {\bfseries you}, of \textbf{all people}...
+%\end{verbatim}
+%
+%\DescribeMacro\scshape
+%\DescribeMacro\textsc
+% The |\scshape| font declaration and the |\textsc| font command
+% will produce small caps in
+% |nonsubmission| mode and double-underlined text in submissions.
+% They work exactly like the corresponding boldface commands:
+%\begin{verbatim}
+%I can't believe that {\scshape you}, of \textsc{all people}...
+%\end{verbatim}
+%
+% Since they can be used for individual words as well as phrases
+% and paragraphs, you may wish to use |\emph{}|, |\textbf{}|,
+% and |\textsc{}| in all cases to avoid confusion.
+%
+% \subsection{Other Commands}
+%
+%\DescribeMacro\ifsubmission
+% The |ifsubmission| command is used to hide latex code or text.
+% The first argument is evaluated for submissions, and ignored
+% otherwise, and vice versa for the second. It can be used in
+% various ways.
+%\begin{verbatim}
+%\ifsubmission{}{Some comments to myself...}
+%\end{verbatim}
+%\begin{verbatim}
+%\ifsubmission{\thirty{-30-}}{
+% \setlength{\textheight}{8.5in}
+% \setlength{\topmargin}{0in}
+%}
+%\end{verbatim}
+%
+%\DescribeMacro\submit
+% Two commands are provided as a convenient shorthand for the
+% |\ifsubmission| command. They take one argument each.
+% Text or commands inside a |\submit| command will be used
+% only for submissions,
+%\DescribeMacro\nosubmit
+% and that in a |\nosubmit| will be used only for
+% non-submissions. For example, the following command is
+% equivalent to the first |\ifsubmission| command above.
+%\begin{verbatim}
+%\nosubmit{Some comments to myself...}
+%\end{verbatim}
+%
+%\DescribeMacro\msheading
+% If for some reason you wish to deviate from the standard running
+% page headings, you can use the |\msheading| command to change
+% them. To remove headings entirely, use the command:
+%\begin{verbatim}
+%\msheading{}
+%\end{verbatim}
+% To keep just the page number, use:
+%\begin{verbatim}
+%\msheading{\thepage}
+%\end{verbatim}
+% To add more space between the default heading parts, use:
+%\begin{verbatim}
+%\msheading{\getsurname\ /\ \getrunningtitle\ /\ \thepage}
+%\end{verbatim}
+% For page numbers of the form ``Page 3 of 135,'' use:
+%\begin{verbatim}
+%\msheading{\pageofpages}
+%\end{verbatim}
+% (Check the code for |\pageofpages| to see how it was done.)
+% Reckless use of the |\msheading| command may cause \LaTeX\
+% errors.
+%
+% Any other \LaTeX\ commands may be used for non-submissions.
+% Using them for submissions may generate unexpected results.
+%
+%
+% \section{Environments}
+%
+%\DescribeEnv{synopsis}
+% The only new \LaTeX\ environment in |sffms| is |synopsis|,
+% intended for use with novels.
+% In |submission| mode, the synopsis is typeset
+% single-spaced with roman numerals for page numbers to distinguish
+% it from the rest of the novel.
+%\begin{verbatim}
+%\begin{synopsis}
+%Summarize your novel here.
+%\end{synopsis}
+%\end{verbatim}
+% The synopsis can be placed anywhere after the |\begin{document}|
+% command. The synopsis environment can
+% also be used without the |novel| option.
+%
+%\DescribeEnv{singlespace}
+% The |singlespace| and |doublespace| environments are inherited
+% from the |setspace| package which is provides the doublespacing
+% for |sffms|. The following will single-space a poem, for example:
+%\begin{verbatim}
+%\begin{singlespace}
+%\begin{verse}
+%Oh, what a bore,\\
+%To be a Vor.
+%\end{verse}
+%\end{singlespace}
+%\end{verbatim}
+% (See the \LaTeX\ Tricks section for an explanation of the |verse|
+% and |quotation| environments.)
+% You should not need the |doublespace| environment, but it works the
+% same way.
+%
+%
+% \section{Troubleshooting}
+%
+% Problems with |sffms| are usually caused by typos in the source
+% file or by a local \LaTeX\ misconfiguration. This section
+% covers the most common issues.
+%
+% \subsection{Processing Errors}
+%
+% If \LaTeX\ complains that it cannot find one or more of |sffms|,
+% |fancyhdr|, |setspace|, |ulem|, or |geometry|, they may not
+% have been installed in the correct directory. If you cannot find
+% the correct spot, or if you are working on a public server
+% where you do not have permission to install new \LaTeX\ packages,
+% you can always put all required files in the folder where the
+% the story file itself is located. \LaTeX\ will find them
+% automatically.
+%
+% If, in particular, \LaTeX\ cannot find |sffms.cls|,
+% |sffdumb.sty|, |sffsmart.sty|, or
+% |geometry.sty|, these files may not have been extracted from
+% |sffms.dtx| or |geometry.dtx|. To create the appropriate files,
+% run latex on |sffms.ins| or |geometry.ins|, respectively,
+% as described in the section on installing |sffms|.
+%
+% The first time you run latex on a new story, you may see a
+% warning that `sffmswc' is undefined and a message telling you
+% to latex the file a second time. This is normal latex behavior.
+% You should latex the file a second time.
+%
+% If \LaTeX\ gives you underfull errors, you can ignore them.
+% If you get overfull errors, you can ignore the small ones
+% (under 5 or 10 points), but for large ones, you should locate
+% the problem line in the source file (by line number) or in the
+% output (by looking for lines that poke out into the margin or
+% end suddenly in with black box). If the overflow is large
+% you may want to split the problematic line or a word manually
+% using |\\|.
+% Normally, \LaTeX\ hyphenates words on its own, but hyphenation
+% is suppressed in submission mode. You should wait until your
+% story is in a final form before twiddling with overfull errors.
+%
+% Font errors can generally be ignored. If you do not like the
+% appearance of the default font, see the section below on appearance
+% issues.
+%
+% In cases where \LaTeX\ halts with an error, read the error
+% message carefully and then type |x| at the question-mark prompt
+% to exit.
+% Return to your story file and locate the section that caused
+% the problem, using either the wording or the line number
+% shown in the error message to help you track it down.
+% Check that you have closed all curly braces and have not
+% accidentally used a special character like |$| or |&|, or
+% misspelled a command. See the \LaTeX\ Basics section for
+% a full list of reserved characters.
+%
+% If you get a cryptic error like ``There's no line here to end''
+% while using the |daw| option,
+% be sure you've included at least a |title|, |author|, and
+% |address|.
+%
+% \subsection{Margin Problems}
+%
+% Margin problems are almost always caused by an incorrect default
+% paper size setting within your \LaTeX\ installation. Several
+% popular \LaTeX\ installations come with |a4| set as the default
+% paper size. Before you blame \LaTeX, however, be sure you
+% understand what |sffms| is supposed to do.
+%
+% For a submission, the bottom margin should be about the same
+% as the side margins---one inch. The running page header with
+% your name, title and the page number pokes up into the top
+% margin, making it appear to be less than an inch on the right
+% side. Everywhere else, however, it should be an inch, or an
+% inch and a half if you are using the |baen| option.
+%
+% If you still think your top margin is too small and the bottom
+% too big, the problem is almost certainly due to your default
+% paper size setting. You can use the |geometry| option to
+% attempt to force the correct paper size, thus:
+%\begin{verbatim}
+%\documentclass[geometry,letterpaper]{sffms}
+%\end{verbatim}
+%
+% You can add papersize flags to certain commands, such as |dvips|,
+% to work around these problems, but the best approach
+% is to fix your default paper size once and for all, especially if
+% you intend to use the |nonsubmission| option
+% or if the geometry option fails.
+%
+% If you are using MiKTeX or a version of teTeX besides the one
+% installed with TeXShop, you may need to change your
+% default paper size to letter paper.
+% For teTeX, you should be able to adjust this setting
+% either during the installation process or afterwards
+% with the |texconfig| command:
+%\begin{verbatim}
+%texconfig dvips paper letter
+%texconfig xdvi us
+%\end{verbatim}
+% You may also need to edit the \\
+% |/usr/local/teTeX/share/texmf/pdftex/config/pdftex.cfg|
+% file as described below for MiKTeX. The changes are the same.
+%
+% You can fix pdf output in MiKTeX by editing the file \\
+% |\texmf\pdftex\config\pdftex.cfg| in your
+% text editor, replacing the lines
+%\begin{verbatim}
+%page_width 210 true mm
+%page_height 297 true mm
+%\end{verbatim}
+% with the following:
+%\begin{verbatim}
+%page_width 8.5 true in
+%page_height 11 true in
+%\end{verbatim}
+% You can fix postscript output by editing the file \\
+% |\texmf\dvips\config\config.ps|, changing
+%\begin{verbatim}
+%@ A4size 210mm 297mm
+%@+ %%PaperSize: A4
+%
+%@ letterSize 8.5in 11in
+%\end{verbatim}
+%to read only:
+%\begin{verbatim}
+%@ letterSize 8.5in 11in
+%@+ %%PaperSize: Letter
+%\end{verbatim}
+% You may still see a problem if you view dvi files in Yap.
+% In that case, open View $\vert$ Options... $\vert$ Display in the
+% Yap menu and change the paper size setting to letter paper.
+% Another possible, but unlikely, culprit is
+% |\texmf\dvipdfm\config\config|, in which you may wish to change
+% |p a4| to |p letter|.
+%
+%
+%
+% \subsection{Other Appearance Issues}
+%
+% If your PDF output looks grainy, try using the |courier| option.
+%
+% If you get a wordcount of |??|, you probably forgot to latex
+% your file twice. Latex the file a second time.
+%
+% Problems with underlining for italics and boldface have a
+% couple of likely causes.
+% The (required) |ulem.sty| package does not officially
+% support underlining across paragraph breaks, so for
+% long stretches of underlined text, you should use a separate
+% font command for each paragraph. You should use the |\emph|
+% |\textbf| or |\textsc| font commands for multiple words, rather
+% than the |\em|, |\bfseries| or |\scshape| font declarations.
+% Also, other \LaTeX\ font commands which produce boldface,
+% italics or slanted text, such as |\bf|, |\it|, or |\slshape|,
+% are not supported by |sffms| and will not be converted
+% properly to underlined text.
+%
+%
+% \section{Credits}
+%
+% Many thanks to Kevin Russell for writing |sfms.cls|, which
+% was itself inspired by code posted by Michael Grant
+% to {\tt rec.arts.sf.composition} in July 2000.
+%
+% The code for |sffsmart.sty| was adapted from |quote.sty| by
+% Hunter Goatley, available from {\sc ctan}.
+%
+% The code for |sffdumb.sty| was adapted from code posted to
+% |comp.text.tex| by Donald Arseneau and improved by advice from
+% the same source.
+%
+% Manuscript-style underlining is provided by |ulem.sty| by
+% Donald Arseneau. Double-spacing is provided by |setspace.sty|
+% by (at least) Geoffrey Tobin and Erica Harris. Running
+% headers are provided by |fancyhdr.sty| by Piet van Oostrum.
+% The geometry option loads |geometry.sty| by Hideo Umeki.
+%
+% Posts to |comp.text.tex| and |rec.arts.sf.composition|,
+% and email from users, notably Daniel Richard G., aided the
+% development of |sffms|. Any remaining errors are my own.
+%
+% \StopEventually{%
+% \ifmulticols
+% \addtocontents{toc}{\protect\end{multicols}}
+% \fi
+% }
+%
+% \begin{macrocode}
+%<*sffms>
+
+\newcounter{wordcounter}
+\newcount\wordc
+\newif\ifsffms@submit
+\newif\ifsffms@novel
+\newif\ifsffms@smart
+\newif\ifsffms@dumb
+\newif\ifsffms@notitle
+\newif\ifsffms@courier
+\newif\ifsffms@baen
+\newif\ifsffms@daw
+\newif\ifsffms@wotf
+\newif\ifsffms@runningtitle
+\newif\ifsffms@surname
+\newif\ifsffms@afour
+\newif\ifsffms@geometry
+\sffms@submittrue
+
+\sfcode`\" = 0
+
+\def\word@count{\ref{sffmswc}}
+\def\author@name{\@author}
+\def\author@address{}
+\def\sur@name{}
+\def\running@title{}
+\def\scenesepstring{\#}
+\def\thirtystring{\# \# \# \# \#}
+\def\disposablestring{}
+\def\pageofpages{Page {\thepage} of \pageref{sffmswc}}
+\def\msheadstring{\getsurname\hspace{.5ex}/\hspace{.5ex}\getrunningtitle\hspace{.5ex}/\hspace{.5ex}\thepage}
+
+\DeclareOption{courier}{%
+ \sffms@couriertrue%
+ \AtBeginDocument{
+ \fontfamily{pcr}\selectfont
+ \renewcommand{\ttdefault}{pcr}
+ \renewcommand{\bfdefault}{pcr}
+ \renewcommand{\itdefault}{pcr}
+ \renewcommand{\sldefault}{pcr}
+ \renewcommand{\scdefault}{pcr}
+ \renewcommand{\updefault}{pcr}
+ }
+}
+
+\DeclareOption{nonsubmission}{\sffms@submitfalse}
+\DeclareOption{submission}{\sffms@submittrue}%obsolete
+\DeclareOption{novel}{\sffms@noveltrue}
+
+\DeclareOption{smart}{%
+ \sffms@smarttrue%
+ \AtBeginDocument{\begindoublequotes}
+ \AtEndDocument{\enddoublequotes}
+}
+
+\DeclareOption{dumb}{\sffms@dumbtrue}
+\DeclareOption{notitle}{\sffms@notitletrue}
+
+\DeclareOption{baen}{\sffms@baentrue}
+\DeclareOption{daw}{\sffms@dawtrue}
+\DeclareOption{wotf}{\sffms@wotftrue}
+
+\DeclareOption{geometry}{\sffms@geometrytrue}
+
+\DeclareOption{a4paper}{
+ \sffms@afourtrue%
+ \PassOptionsToClass{\CurrentOption}{geometry}
+ \PassOptionsToClass{\CurrentOption}{report}}
+
+\DeclareOption{letterpaper}{
+ \sffms@afourfalse%
+ \PassOptionsToClass{\CurrentOption}{geometry}
+ \PassOptionsToClass{\CurrentOption}{report}}
+
+
+\DeclareOption*{\PassOptionsToClass{\CurrentOption}{report}}
+\ProcessOptions
+
+
+
+\ifsffms@submit%
+ \LoadClass[12pt]{report}
+ \RequirePackage[T1]{fontenc}
+ \RequirePackage{fancyhdr}
+ \RequirePackage{ulem}
+ \RequirePackage{setspace}\setstretch{1.83}
+ \ifsffms@geometry
+ \ifsffms@baen \RequirePackage[hmargin=1.5in,bmargin=1.5in,tmargin=1.5in,headheight=.38in,headsep=.12in,nofoot]{geometry}%
+ \else \RequirePackage[hmargin=1in,bmargin=1in,tmargin=1in,headheight=.88in,headsep=.12in,nofoot]{geometry}%
+ \fi%endbaenif
+ \fi%endgeometryif
+\else\LoadClass{report}%
+ \RequirePackage{setspace} \fi
+
+\ifsffms@smart \RequirePackage{sffsmart} \fi
+\ifsffms@dumb \RequirePackage{sffdumb} \fi
+
+\ifsffms@submit%
+ \ifsffms@geometry% then margins are all set so do nothing
+ \sffms@geometrytrue
+ \else% have to set margins manually from paperdim
+ \setlength\headheight{.38in}
+ \setlength\headsep{.12in}
+ \setlength\textwidth{\paperwidth}
+ \newlength{\sffms@margin}
+ \setlength{\sffms@margin}{0in}
+ \ifsffms@baen \addtolength{\sffms@margin}{.5in} \fi
+ \setlength\textwidth{\paperwidth}
+ \addtolength\textwidth{-2in}
+ \addtolength\textwidth{-2\sffms@margin}
+ \setlength\oddsidemargin{\sffms@margin}
+ \setlength\textheight{\paperheight}
+ \addtolength\textheight{-2in}
+ \addtolength\textheight{-2\sffms@margin}
+ \setlength\topmargin{\sffms@margin}
+ \addtolength\topmargin{-.5in}
+ \fi%
+\fi%
+
+
+\newcommand{\authorname}[1]{\def\author@name{#1}}
+\newcommand{\address}[1]{\def\author@address{#1}}
+\newcommand{\wordcount}[1]{\def\word@count{#1}}
+\newcommand{\surname}[1]{\def\sur@name{#1} \sffms@surnametrue}
+\newcommand{\runningtitle}[1]{\def\running@title{#1} \sffms@runningtitletrue}
+\newcommand{\sceneseparator}[1]{\def\scenesepstring{#1}}
+\newcommand{\thirty}[1]{\def\thirtystring{#1}}
+\newcommand{\disposable}{\def\disposablestring{Disposable~Copy}}
+\ifsffms@wotf%
+ \def\msheadstring{\MakeUppercase{\@title}\hspace{.5ex}/\hspace{.5ex}\thepage} \fi%
+\newcommand{\msheading}[1]{\def\msheadstring{#1}}
+
+\newcommand{\penname}[1]{} % obsolete
+\newcommand{\getpenname}{\@author} % obsolete
+
+\newcommand{\getrunningtitle}{\ifsffms@runningtitle%
+ \MakeUppercase{\running@title}%
+ \else \MakeUppercase{\@title}%
+\fi}
+
+\newcommand{\getsurname}{\ifsffms@surname%
+ \sur@name \else \@author \fi}
+
+\ifsffms@submit%
+\newcommand{\newscene}{\centerline {\scenesepstring}}
+ \newcommand{\ifsubmission}[2]{#1}%
+\else \newcommand{\newscene}{\vspace{1\baselineskip}}
+ \newcommand{\ifsubmission}[2]{#2} \fi
+
+\newcommand{\submit}[1]{\ifsubmission{#1}{}}
+\newcommand{\nosubmit}[1]{\ifsubmission{}{#1}}
+
+\newcommand{\scenebreak}{\newscene}
+
+\newcommand{\thought}[1]{\emph{#1}}
+
+
+\ifsffms@submit
+ \AtBeginDocument{
+ \ttfamily
+ \useunder{\uwave}{\bfseries}{\textbf}%ulem command for boldface
+ \useunder{\uuline}{\scshape}{\textsc}%ulem command for smallcaps
+ \renewcommand\chapter{\if@openright\clearpage\else\cleardoublepage\fi
+ \secdef\@chapter\@schapter}
+ \def\@makechapterhead#1{\vspace*{4\baselineskip}
+ \begin{center}\@chapapp\space\thechapter\\ #1 \end{center}
+ \vspace*{1\baselineskip}}
+ \def\@schapter#1{%
+ \if@twocolumn\@topnewpage[\@makeschapterhead{#1}]%
+ \else\@makeschapterhead{#1}\@afterheading\fi}
+ \def\@makeschapterhead#1{\vspace*{4\baselineskip}
+ \begin{center} #1 \end{center} \vspace*{1\baselineskip}}
+ }%
+\fi
+
+\ifsffms@novel%
+ \newcounter{tempcounter}
+ \newenvironment{synopsis}
+ {\setcounter{tempcounter}{\value{page}}
+ \pagenumbering{roman}
+ \singlespace
+ \chapter*{Synopsis of \MakeUppercase{\@title}}}
+ {\clearpage \setcounter{page}{\value{tempcounter}}
+ \pagenumbering{arabic} \pagestyle{fancy}}%
+\else \newenvironment{synopsis}{SYNOPSIS: }{\scenebreak} \fi
+
+\newcommand{\sffms@commonsubsetup}%
+{\pagestyle{fancy}
+ \fancyhead[r]{{\ttfamily \msheadstring}}
+ \fancyfoot{}
+ \renewcommand{\headrulewidth}{0pt}
+ \renewcommand{\footrulewidth}{0pt}
+ \raggedright
+ \settowidth{\parindent}{\texttt{~~~~~}}
+}
+
+
+\AtBeginDocument{
+\ifsffms@notitle%
+ \ifsffms@submit \sffms@commonsubsetup \fi%
+ \else%
+ \ifsffms@submit%beginning of + 2nd submit if
+ \sffms@commonsubsetup
+ \thispagestyle{empty}
+ \newsavebox{\sffms@fronttopsavebox}
+ \begin{lrbox}{\sffms@fronttopsavebox}
+ \begin{minipage}[t]{\textwidth}
+ \begin{singlespace}%
+ \ifsffms@daw \hfill\parbox[t]{.40\textwidth}{\raggedright\author@name\\%
+ \author@address\\[\baselineskip]%
+ \word@count\ words\\ \disposablestring}%
+ \else%
+ \parbox[t]{.65\textwidth}{\author@name\\\author@address}\hfill
+ \parbox[t]{.30\textwidth}{\raggedleft\word@count\ words\\[\baselineskip]%
+ \disposablestring}%
+ \fi%
+ \end{singlespace}
+ \end{minipage}
+ \end{lrbox}
+ \noindent\raisebox{0pt}[0pt][0pt]{\usebox{\sffms@fronttopsavebox}}
+ \vspace{0.39\textheight}
+ \begin{center}\MakeUppercase{\@title}\\by \@author\end{center}
+ \vspace{1\baselineskip}%
+ \else \maketitle \setcounter{page}{2} \fi%
+ \ifsffms@wotf \setcounter{page}{0} \clearpage%
+ \else \ifsffms@novel\clearpage\fi%
+ \fi%
+\fi%
+}
+
+\AtEndDocument{\vspace{12pt}\centerline{\thirtystring}%
+ \ifsffms@submit%
+ \wordc=\thepage%
+ \ifsffms@courier \multiply\wordc by 250%
+ \else \ifsffms@baen \multiply\wordc by 250%
+ \else \multiply\wordc by 295 \fi \fi%
+ \setcounter{wordcounter}{\the\wordc}%
+ \addtocounter{wordcounter}{-1}%
+ \refstepcounter{wordcounter}%
+ \fi%
+ \label{sffmswc}%
+}
+%</sffms>
+% \end{macrocode}
+% \begin{macrocode}
+%<*smart>
+{%
+\catcode`\"=\active
+\catcode`\@=11
+\gdef\begindoublequotes{%
+ \global\catcode`\"=\active
+ \global\chardef\dq=`\"
+ \global\let\dblqu@te=L
+ }
+\gdef"{\ifinner\else\ifvmode\let\dblqu@te=L\fi\fi
+ \if L\dblqu@te``\global\let\dblqu@te=R%
+ \else
+ \let\xxx=\spacefactor
+ ''\global\let\dblqu@te=L%
+ \spacefactor\xxx
+ \fi
+ }
+}
+
+\gdef\enddoublequotes{\catcode`\"=12}
+%</smart>
+%<*dumb>
+\def\dumbquote{\afterassignment"\let\next= }
+\sfcode`\" = 0
+\def\rquote{'}
+\def\lquote{`}
+\catcode`'=\active \def'{\actrq}
+\catcode``=\active \def`{\actlq}
+\def\rqtest{\ifx\next'\let\next=\dumbquote\else\let\next=\rquote\fi\next}
+\def\lqtest{\ifx\next`\let\next=\dumbquote\else\let\next=\lquote\fi\next}
+\def\actrq{\futurelet\next\rqtest}
+\def\actlq{\futurelet\next\lqtest}
+%</dumb>
+% \end{macrocode}
+%
+% \Finale
+\endinput
+