summaryrefslogtreecommitdiff
path: root/macros/latex/contrib/revtex/sample/aapm/aapmsamp.tex
diff options
context:
space:
mode:
Diffstat (limited to 'macros/latex/contrib/revtex/sample/aapm/aapmsamp.tex')
-rw-r--r--macros/latex/contrib/revtex/sample/aapm/aapmsamp.tex616
1 files changed, 616 insertions, 0 deletions
diff --git a/macros/latex/contrib/revtex/sample/aapm/aapmsamp.tex b/macros/latex/contrib/revtex/sample/aapm/aapmsamp.tex
new file mode 100644
index 0000000000..e1c5ff96d0
--- /dev/null
+++ b/macros/latex/contrib/revtex/sample/aapm/aapmsamp.tex
@@ -0,0 +1,616 @@
+% ****** Start of file aapmsamp.tex ******
+%
+% This file is part of the AAPM files in the AAPM distribution for REVTeX 4-2.
+% Version 4.2a of REVTeX, January 2015
+%
+% Copyright (c) 2015 American Association of Physicists in Medicine (AAPM).
+%
+% See the AAPM README file for restrictions and more information.
+%
+% TeX'ing this file requires that you have AMS-LaTeX 2.0 installed
+% as well as the rest of the prerequisites for REVTeX 4.2
+%
+% It also requires running BibTeX. The commands are as follows:
+%
+% 1) latex aapmsamp
+% 2) bibtex aapmsamp
+% 3) latex aapmsamp
+% 4) latex aapmsamp
+%
+% Use this file as a source of example code for your aapm document.
+% Use the file aapmtemplate.tex as a template for your document.
+\documentclass[%
+ aapm,
+ mph,%
+ amsmath,amssymb,
+%preprint,%
+ reprint,%
+%author-year,%
+%author-numerical,%
+]{revtex4-2}
+
+\usepackage{graphicx}% Include figure files
+\usepackage{dcolumn}% Align table columns on decimal point
+\usepackage{bm}% bold math
+
+\usepackage[mathlines]{lineno}% Enable numbering of text and display math
+\modulolinenumbers[5]% Line numbers with a gap of 5 lines
+\linenumbers\relax % Commence numbering lines
+
+\begin{document}
+
+\preprint{AAPM/123-QED}
+
+\title[Sample title]{Sample Title:\\with Forced Linebreak\footnote{Error!}}% Force line breaks with \\
+\thanks{Footnote to title of article.}
+
+\author{A. Author}
+ \altaffiliation[Also at ]{Physics Department, XYZ University.}%Lines break automatically or can be forced with \\
+\author{B. Author}%
+ \email{Second.Author@institution.edu.}
+\affiliation{
+Authors' institution and/or address%\\This line break forced with \textbackslash\textbackslash
+}%
+
+\author{C. Author}
+ \homepage{http://www.Second.institution.edu/~Charlie.Author.}
+\affiliation{%
+Second institution and/or address%\\This line break forced% with \\
+}%
+
+\date{\today}% It is always \today, today,
+ % but any date may be explicitly specified
+
+\begin{abstract}
+An article usually includes an abstract, a concise summary of the work
+covered at length in the main body of the article. It is used for
+secondary publications and for information retrieval purposes.
+%
+\end{abstract}
+
+\keywords{Suggested keywords}%Use showkeys class option if keyword
+ %display desired
+\maketitle
+
+\begin{quotation}
+The ``lead paragraph'' is encapsulated with the \LaTeX\
+\verb+quotation+ environment and is formatted as a single paragraph before the first section heading.
+(The \verb+quotation+ environment reverts to its usual meaning after the first sectioning command.)
+Note that numbered references are allowed in the lead paragraph.
+%
+The lead paragraph will only be found in an article being prepared for the journal \textit{Chaos}.
+\end{quotation}
+
+\section{\label{sec:level1}First-level heading:\protect\\ The line
+break was forced \lowercase{via} \textbackslash\textbackslash}
+
+This sample document demonstrates proper use of REV\TeX~4.2 (and
+\LaTeXe) in manuscripts prepared for submission to AAPM
+journals. Further information can be found in the documentation included in the distribution or available at
+\url{http://www.aapm.org} and in the documentation for
+REV\TeX~4.2 itself.
+
+When commands are referred to in this example file, they are always
+shown with their required arguments, using normal \TeX{} format. In
+this format, \verb+#1+, \verb+#2+, etc. stand for required
+author-supplied arguments to commands. For example, in
+\verb+\section{#1}+ the \verb+#1+ stands for the title text of the
+author's section heading, and in \verb+\title{#1}+ the \verb+#1+
+stands for the title text of the paper.
+
+Line breaks in section headings at all levels can be introduced using
+\textbackslash\textbackslash. A blank input line tells \TeX\ that the
+paragraph has ended.
+
+\subsection{\label{sec:level2}Second-level heading: Formatting}
+
+This file may be formatted in both the \texttt{preprint} (the default) and
+\texttt{reprint} styles; the latter format may be used to
+mimic final journal output. In addition, there is another
+option available, \texttt{lengthcheck}, which formats the document as closely
+as possible to an actual journal article, to facilitate the author's
+performance of a length check. Either format may be used for submission
+purposes; however, for peer review and production, AAPM will format the
+article using the \texttt{preprint} class option. Hence, it is
+essential that authors check that their manuscripts format acceptably
+under \texttt{preprint}. Manuscripts submitted to AAPM that do not
+format correctly under the \texttt{preprint} option may be delayed in
+both the editorial and production processes.
+
+The \texttt{widetext} environment will make the text the width of the
+full page, as on page~\pageref{eq:wideeq}. (Note the use the
+\verb+\pageref{#1}+ to get the page number right automatically.) The
+width-changing commands only take effect in \texttt{twocolumn}
+formatting. It has no effect if \texttt{preprint} formatting is chosen
+instead.
+
+\subsubsection{\label{sec:level3}Third-level heading: Citations and Footnotes}
+
+Citations in text refer to entries in the Bibliography;
+they use the commands \verb+\cite{#1}+ or \verb+\onlinecite{#1}+.
+Because REV\TeX\ uses the \verb+natbib+ package of Patrick Daly,
+its entire repertoire of commands are available in your document;
+see the \verb+natbib+ documentation for further details.
+The argument of \verb+\cite+ is a comma-separated list of \emph{keys};
+a key may consist of letters and numerals.
+
+By default, AAPM citations are numerical; \cite{feyn54}
+to give a textual citation, use \verb+\onlinecite{#1}+: (Refs.~\onlinecite{witten2001,epr,Bire82}).
+REV\TeX\ ``collapses'' lists of consecutive numerical citations when appropriate.
+To illustrate, we cite several together \cite{feyn54,witten2001,epr,Berman1983},
+and once again (Refs.~\onlinecite{epr,feyn54,Bire82,Berman1983}).
+Note that, when numerical citations are used, the references were sorted into the same order they appear in the bibliography.
+
+A reference within the bibliography is specified with a \verb+\bibitem{#1}+ command,
+where the argument is the citation key mentioned above.
+\verb+\bibitem{#1}+ commands may be crafted by hand or, preferably,
+generated by using Bib\TeX.
+The AAPM styles for REV\TeX~4 include Bib\TeX\ style file
+\verb+aapmrev4-2.bst+, appropriate for
+numbered bibliography.
+REV\TeX~4 will automatically choose the style appropriate for
+the document's selected class options: the default is numerical.
+
+This sample file demonstrates a simple use of Bib\TeX\
+via a \verb+\bibliography+ command referencing the \verb+aapmsamp.bib+ file.
+Running Bib\TeX\ (in this case \texttt{bibtex
+aapmsamp}) after the first pass of \LaTeX\ produces the file
+\verb+aapmsamp.bbl+ which contains the automatically formatted
+\verb+\bibitem+ commands (including extra markup information via
+\verb+\bibinfo+ commands). If not using Bib\TeX, the
+\verb+thebibiliography+ environment should be used instead.
+
+\paragraph{Fourth-level heading is run in.}%
+Footnotes are produced using the \verb+\footnote{#1}+ command.
+Numerical style citations put footnotes into the
+bibliography\footnote{Automatically placing footnotes into the bibliography requires using BibTeX to compile the bibliography.}.
+Note: due to the method used to place footnotes in the bibliography, \emph{you
+must re-run BibTeX every time you change any of your document's
+footnotes}.
+
+\section{Math and Equations}
+Inline math may be typeset using the \verb+$+ delimiters. Bold math
+symbols may be achieved using the \verb+bm+ package and the
+\verb+\bm{#1}+ command it supplies. For instance, a bold $\alpha$ can
+be typeset as \verb+$\bm{\alpha}$+ giving $\bm{\alpha}$. Fraktur and
+Blackboard (or open face or double struck) characters should be
+typeset using the \verb+\mathfrak{#1}+ and \verb+\mathbb{#1}+ commands
+respectively. Both are supplied by the \texttt{amssymb} package. For
+example, \verb+$\mathbb{R}$+ gives $\mathbb{R}$ and
+\verb+$\mathfrak{G}$+ gives $\mathfrak{G}$
+
+In \LaTeX\ there are many different ways to display equations, and a
+few preferred ways are noted below. Displayed math will flush left by
+default.
+
+Below we have numbered single-line equations, the most common kind:
+\begin{eqnarray}
+\chi_+(p)\alt{\bf [}2|{\bf p}|(|{\bf p}|+p_z){\bf ]}^{-1/2}
+\left(
+\begin{array}{c}
+|{\bf p}|+p_z\\
+px+ip_y
+\end{array}\right)\;,
+\\
+\left\{%
+ \openone234567890abc123\alpha\beta\gamma\delta1234556\alpha\beta
+ \frac{1\sum^{a}_{b}}{A^2}%
+\right\}%
+\label{eq:one}.
+\end{eqnarray}
+Note the open one in Eq.~(\ref{eq:one}).
+
+Not all numbered equations will fit within a narrow column this
+way. The equation number will move down automatically if it cannot fit
+on the same line with a one-line equation:
+\begin{equation}
+\left\{
+ ab12345678abc123456abcdef\alpha\beta\gamma\delta1234556\alpha\beta
+ \frac{1\sum^{a}_{b}}{A^2}%
+\right\}.
+\end{equation}
+
+When the \verb+\label{#1}+ command is used [cf. input for
+Eq.~(\ref{eq:one})], the equation can be referred to in text without
+knowing the equation number that \TeX\ will assign to it. Just
+use \verb+\ref{#1}+, where \verb+#1+ is the same name that used in
+the \verb+\label{#1}+ command.
+
+Unnumbered single-line equations can be typeset
+using the \verb+\[+, \verb+\]+ format:
+\[g^+g^+ \rightarrow g^+g^+g^+g^+ \dots ~,~~q^+q^+\rightarrow
+q^+g^+g^+ \dots ~. \]
+
+\subsection{Multiline equations}
+
+Multiline equations are obtained by using the \verb+eqnarray+
+environment. Use the \verb+\nonumber+ command at the end of each line
+to avoid assigning a number:
+\begin{eqnarray}
+{\cal M}=&&ig_Z^2(4E_1E_2)^{1/2}(l_i^2)^{-1}
+\delta_{\sigma_1,-\sigma_2}
+(g_{\sigma_2}^e)^2\chi_{-\sigma_2}(p_2)\nonumber\\
+&&\times
+[\epsilon_jl_i\epsilon_i]_{\sigma_1}\chi_{\sigma_1}(p_1),
+\end{eqnarray}
+\begin{eqnarray}
+\sum \vert M^{\text{viol}}_g \vert ^2&=&g^{2n-4}_S(Q^2)~N^{n-2}
+ (N^2-1)\nonumber \\
+ & &\times \left( \sum_{i<j}\right)
+ \sum_{\text{perm}}
+ \frac{1}{S_{12}}
+ \frac{1}{S_{12}}
+ \sum_\tau c^f_\tau~.
+\end{eqnarray}
+\textbf{Note:} Do not use \verb+\label{#1}+ on a line of a multiline
+equation if \verb+\nonumber+ is also used on that line. Incorrect
+cross-referencing will result. Notice the use \verb+\text{#1}+ for
+using a Roman font within a math environment.
+
+To set a multiline equation without \emph{any} equation
+numbers, use the \verb+\begin{eqnarray*}+,
+\verb+\end{eqnarray*}+ format:
+\begin{eqnarray*}
+\sum \vert M^{\text{viol}}_g \vert ^2&=&g^{2n-4}_S(Q^2)~N^{n-2}
+ (N^2-1)\\
+ & &\times \left( \sum_{i<j}\right)
+ \left(
+ \sum_{\text{perm}}\frac{1}{S_{12}S_{23}S_{n1}}
+ \right)
+ \frac{1}{S_{12}}~.
+\end{eqnarray*}
+To obtain numbers not normally produced by the automatic numbering,
+use the \verb+\tag{#1}+ command, where \verb+#1+ is the desired
+equation number. For example, to get an equation number of
+(\ref{eq:mynum}),
+\begin{equation}
+g^+g^+ \rightarrow g^+g^+g^+g^+ \dots ~,~~q^+q^+\rightarrow
+q^+g^+g^+ \dots ~. \tag{2.6$'$}\label{eq:mynum}
+\end{equation}
+
+A few notes on \verb=\tag{#1}=. \verb+\tag{#1}+ requires
+\texttt{amsmath}. The \verb+\tag{#1}+ must come before the
+\verb+\label{#1}+, if any. The numbering set with \verb+\tag{#1}+ is
+\textit{transparent} to the automatic numbering in REV\TeX{};
+therefore, the number must be known ahead of time, and it must be
+manually adjusted if other equations are added. \verb+\tag{#1}+ works
+with both single-line and multiline equations. \verb+\tag{#1}+ should
+only be used in exceptional case - do not use it to number all
+equations in a paper.
+
+Note the equation number gets reset again:
+\begin{equation}
+g^+g^+g^+ \rightarrow g^+g^+g^+g^+g^+ \dots ~,~~q^+q^+\rightarrow
+q^+g^+g^+ \dots ~.
+\end{equation}
+
+Enclosing single-line and multiline equations in
+\verb+\begin{subequations}+ and \verb+\end{subequations}+ will produce
+a set of equations that are ``numbered'' with letters, as shown in
+Eqs.~(\ref{subeq:1}) and (\ref{subeq:2}) below:
+\begin{subequations}
+\label{eq:whole}
+\begin{equation}
+\left\{
+ abc123456abcdef\alpha\beta\gamma\delta1234556\alpha\beta
+ \frac{1\sum^{a}_{b}}{A^2}
+\right\},\label{subeq:1}
+\end{equation}
+\begin{eqnarray}
+{\cal M}=&&ig_Z^2(4E_1E_2)^{1/2}(l_i^2)^{-1}
+(g_{\sigma_2}^e)^2\chi_{-\sigma_2}(p_2)\nonumber\\
+&&\times
+[\epsilon_i]_{\sigma_1}\chi_{\sigma_1}(p_1).\label{subeq:2}
+\end{eqnarray}
+\end{subequations}
+Putting a \verb+\label{#1}+ command right after the
+\verb+\begin{subequations}+, allows one to
+reference all the equations in a subequations environment. For
+example, the equations in the preceding subequations environment were
+Eqs.~(\ref{eq:whole}).
+
+\subsubsection{Wide equations}
+The equation that follows is set in a wide format, i.e., it spans
+across the full page. The wide format is reserved for long equations
+that cannot be easily broken into four lines or less:
+\begin{widetext}
+\begin{equation}
+{\cal R}^{(\text{d})}=
+ g_{\sigma_2}^e
+ \left(
+ \frac{[\Gamma^Z(3,21)]_{\sigma_1}}{Q_{12}^2-M_W^2}
+ +\frac{[\Gamma^Z(13,2)]_{\sigma_1}}{Q_{13}^2-M_W^2}
+ \right)
+ + x_WQ_e
+ \left(
+ \frac{[\Gamma^\gamma(3,21)]_{\sigma_1}}{Q_{12}^2-M_W^2}
+ +\frac{[\Gamma^\gamma(13,2)]_{\sigma_1}}{Q_{13}^2-M_W^2}
+ \right)\;. \label{eq:wideeq}
+\end{equation}
+\end{widetext}
+This is typed to show the output is in wide format.
+(Since there is no input line between \verb+\equation+ and
+this paragraph, there is no paragraph indent for this paragraph.)
+\section{Cross-referencing}
+REV\TeX{} will automatically number sections, equations, figure
+captions, and tables. In order to reference them in text, use the
+\verb+\label{#1}+ and \verb+\ref{#1}+ commands. To reference a
+particular page, use the \verb+\pageref{#1}+ command.
+
+The \verb+\label{#1}+ should appear in a section heading, within an
+equation, or in a table or figure caption. The \verb+\ref{#1}+ command
+is used in the text where the citation is to be displayed. Some
+examples: Section~\ref{sec:level1} on page~\pageref{sec:level1},
+Table~\ref{tab:table1},%
+\begin{table}
+\caption{\label{tab:table1}This is a narrow table which fits into a
+text column when using \texttt{twocolumn} formatting. Note that
+REV\TeX~4 adjusts the intercolumn spacing so that the table fills the
+entire width of the column. Table captions are numbered
+automatically. This table illustrates left-aligned, centered, and
+right-aligned columns. }
+\begin{ruledtabular}
+\begin{tabular}{lcr}
+Left\footnote{Note a.}&Centered\footnote{Note b.}&Right\\
+\hline
+1 & 2 & 3\\
+10 & 20 & 30\\
+100 & 200 & 300\\
+\end{tabular}
+\end{ruledtabular}
+\end{table}
+and Fig.~\ref{fig:epsart}.
+
+\section{Figures and Tables}
+Figures and tables are typically ``floats''; \LaTeX\ determines their
+final position via placement rules.
+\LaTeX\ isn't always successful in automatically placing floats where you wish them.
+
+Figures are marked up with the \texttt{figure} environment, the content of which
+imports the image (\verb+\includegraphics+) followed by the figure caption (\verb+\caption+).
+The argument of the latter command should itself contain a \verb+\label+ command if you
+wish to refer to your figure with \verb+\ref+.
+
+Import your image using either the \texttt{graphics} or
+\texttt{graphix} packages. These packages both define the
+\verb+\includegraphics{#1}+ command, but they differ in the optional
+arguments for specifying the orientation, scaling, and translation of the figure.
+Fig.~\ref{fig:epsart}%
+\begin{figure}
+\includegraphics{fig_1}% Here is how to import EPS art
+\caption{\label{fig:epsart} A figure caption. The figure captions are
+automatically numbered.}
+\end{figure}
+is small enough to fit in a single column, while
+Fig.~\ref{fig:wide}%
+\begin{figure*}
+\includegraphics{fig_2}% Here is how to import EPS art
+\caption{\label{fig:wide}Use the \texttt{figure*} environment to get a wide
+figure, spanning the page in \texttt{twocolumn} formatting.}
+\end{figure*}
+is too wide for a single column,
+so instead the \texttt{figure*} environment has been used.
+
+The analog of the \texttt{figure} environment is \texttt{table}, which uses
+the same \verb+\caption+ command.
+However, you should type your caption command first within the \texttt{table},
+instead of last as you did for \texttt{figure}.
+
+The heart of any table is the \texttt{tabular} environment,
+which represents the table content as a (vertical) sequence of table rows,
+each containing a (horizontal) sequence of table cells.
+Cells are separated by the \verb+&+ character;
+the row terminates with \verb+\\+.
+The required argument for the \texttt{tabular} environment
+specifies how data are displayed in each of the columns.
+For instance, a column
+may be centered (\verb+c+), left-justified (\verb+l+), right-justified (\verb+r+),
+or aligned on a decimal point (\verb+d+).
+(Table~\ref{tab:table4}%
+\begin{table}
+\caption{\label{tab:table4}Numbers in columns Three--Five have been
+aligned by using the ``d'' column specifier (requires the
+\texttt{dcolumn} package).
+Non-numeric entries (those entries without
+a ``.'') in a ``d'' column are aligned on the decimal point.
+Use the
+``D'' specifier for more complex layouts. }
+\begin{ruledtabular}
+\begin{tabular}{ccddd}
+One&Two&\mbox{Three}&\mbox{Four}&\mbox{Five}\\
+\hline
+one&two&\mbox{three}&\mbox{four}&\mbox{five}\\
+He&2& 2.77234 & 45672. & 0.69 \\
+C\footnote{Some tables require footnotes.}
+ &C\footnote{Some tables need more than one footnote.}
+ & 12537.64 & 37.66345 & 86.37 \\
+\end{tabular}
+\end{ruledtabular}
+\end{table}
+illustrates the use of decimal column alignment.)
+
+Extra column-spacing may be be specified as well, although
+REV\TeX~4 sets this spacing so that the columns fill the width of the
+table.
+Horizontal rules are typeset using the \verb+\hline+
+command.
+The doubled (or Scotch) rules that appear at the top and
+bottom of a table can be achieved by enclosing the \texttt{tabular}
+environment within a \texttt{ruledtabular} environment.
+Rows whose columns span multiple columns can be typeset using \LaTeX's
+\verb+\multicolumn{#1}{#2}{#3}+ command
+(for example, see the first row of Table~\ref{tab:table3}).%
+\begin{table*}
+\caption{\label{tab:table3}This is a wide table that spans the page
+width in \texttt{twocolumn} mode. It is formatted using the
+\texttt{table*} environment. It also demonstrates the use of
+\textbackslash\texttt{multicolumn} in rows with entries that span
+more than one column.}
+\begin{ruledtabular}
+\begin{tabular}{ccccc}
+ &\multicolumn{2}{c}{$D_{4h}^1$}&\multicolumn{2}{c}{$D_{4h}^5$}\\
+ Ion&1st alternative&2nd alternative&lst alternative
+&2nd alternative\\ \hline
+ K&$(2e)+(2f)$&$(4i)$ &$(2c)+(2d)$&$(4f)$ \\
+ Mn&$(2g)$\footnote{The $z$ parameter of these positions is $z\sim\frac{1}{4}$.}
+ &$(a)+(b)+(c)+(d)$&$(4e)$&$(2a)+(2b)$\\
+ Cl&$(a)+(b)+(c)+(d)$&$(2g)$\footnote{This is a footnote in a table that spans the full page
+width in \texttt{twocolumn} mode. It is supposed to set on the full width of the page, just as the caption does. }
+ &$(4e)^{\text{a}}$\\
+ He&$(8r)^{\text{a}}$&$(4j)^{\text{a}}$&$(4g)^{\text{a}}$\\
+ Ag& &$(4k)^{\text{a}}$& &$(4h)^{\text{a}}$\\
+\end{tabular}
+\end{ruledtabular}
+\end{table*}
+
+The tables in this document illustrate various effects.
+Tables that fit in a narrow column are contained in a \texttt{table}
+environment.
+Table~\ref{tab:table3} is a wide table, therefore set with the
+\texttt{table*} environment.
+Lengthy tables may need to break across pages.
+A simple way to allow this is to specify
+the \verb+[H]+ float placement on the \texttt{table} or
+\texttt{table*} environment.
+Alternatively, using the standard \LaTeXe\ package \texttt{longtable}
+gives more control over how tables break and allows headers and footers
+to be specified for each page of the table.
+An example of the use of \texttt{longtable} can be found
+in the file \texttt{summary.tex} that is included with the REV\TeX~4
+distribution.
+
+There are two methods for setting footnotes within a table (these
+footnotes will be displayed directly below the table rather than at
+the bottom of the page or in the bibliography).
+The easiest
+and preferred method is just to use the \verb+\footnote{#1}+
+command. This will automatically enumerate the footnotes with
+lowercase roman letters.
+However, it is sometimes necessary to have
+multiple entries in the table share the same footnote.
+In this case,
+create the footnotes using
+\verb+\footnotemark[#1]+ and \verb+\footnotetext[#1]{#2}+.
+\texttt{\#1} is a numeric value.
+Each time the same value for \texttt{\#1} is used,
+the same mark is produced in the table.
+The \verb+\footnotetext[#1]{#2}+ commands are placed after the \texttt{tabular}
+environment.
+Examine the \LaTeX\ source and output for Tables~\ref{tab:table1} and
+\ref{tab:table2}%
+\begin{table}
+\caption{\label{tab:table2}A table with more columns still fits
+properly in a column. Note that several entries share the same
+footnote. Inspect the \LaTeX\ input for this table to see
+exactly how it is done.}
+\begin{ruledtabular}
+\begin{tabular}{cccccccc}
+ &$r_c$ (\AA)&$r_0$ (\AA)&$\kappa r_0$&
+ &$r_c$ (\AA) &$r_0$ (\AA)&$\kappa r_0$\\
+\hline
+Cu& 0.800 & 14.10 & 2.550 &Sn\footnotemark[1]
+& 0.680 & 1.870 & 3.700 \\
+Ag& 0.990 & 15.90 & 2.710 &Pb\footnotemark[2]
+& 0.450 & 1.930 & 3.760 \\
+Au& 1.150 & 15.90 & 2.710 &Ca\footnotemark[3]
+& 0.750 & 2.170 & 3.560 \\
+Mg& 0.490 & 17.60 & 3.200 &Sr\footnotemark[4]
+& 0.900 & 2.370 & 3.720 \\
+Zn& 0.300 & 15.20 & 2.970 &Li\footnotemark[2]
+& 0.380 & 1.730 & 2.830 \\
+Cd& 0.530 & 17.10 & 3.160 &Na\footnotemark[5]
+& 0.760 & 2.110 & 3.120 \\
+Hg& 0.550 & 17.80 & 3.220 &K\footnotemark[5]
+& 1.120 & 2.620 & 3.480 \\
+Al& 0.230 & 15.80 & 3.240 &Rb\footnotemark[3]
+& 1.330 & 2.800 & 3.590 \\
+Ga& 0.310 & 16.70 & 3.330 &Cs\footnotemark[4]
+& 1.420 & 3.030 & 3.740 \\
+In& 0.460 & 18.40 & 3.500 &Ba\footnotemark[5]
+& 0.960 & 2.460 & 3.780 \\
+Tl& 0.480 & 18.90 & 3.550 & & & & \\
+\end{tabular}
+\end{ruledtabular}
+\footnotetext[1]{Here's the first, from Ref.~\onlinecite{feyn54}.}
+\footnotetext[2]{Here's the second.}
+\footnotetext[3]{Here's the third.}
+\footnotetext[4]{Here's the fourth.}
+\footnotetext[5]{And etc.}
+\end{table}
+for an illustration.
+
+All AAPM journals require that the initial citation of
+figures or tables be in numerical order.
+\LaTeX's automatic numbering of floats is your friend here:
+just put each \texttt{figure} environment immediately following
+its first reference (\verb+\ref+), as we have done in this example file.
+
+\begin{acknowledgments}
+We wish to acknowledge the support of the author community in using
+REV\TeX{}, offering suggestions and encouragement, testing new versions,
+\dots.
+\end{acknowledgments}
+
+\appendix
+
+\section{Appendixes}
+
+To start the appendixes, use the \verb+\appendix+ command.
+This signals that all following section commands refer to appendixes
+instead of regular sections. Therefore, the \verb+\appendix+ command
+should be used only once---to set up the section commands to act as
+appendixes. Thereafter normal section commands are used. The heading
+for a section can be left empty. For example,
+\begin{verbatim}
+\appendix
+\section{}
+\end{verbatim}
+will produce an appendix heading that says ``APPENDIX A'' and
+\begin{verbatim}
+\appendix
+\section{Background}
+\end{verbatim}
+will produce an appendix heading that says ``APPENDIX A: BACKGROUND''
+(note that the colon is set automatically).
+
+If there is only one appendix, then the letter ``A'' should not
+appear. This is suppressed by using the star version of the appendix
+command (\verb+\appendix*+ in the place of \verb+\appendix+).
+
+\section{A little more on appendixes}
+
+Observe that this appendix was started by using
+\begin{verbatim}
+\section{A little more on appendixes}
+\end{verbatim}
+
+Note the equation number in an appendix:
+\begin{equation}
+E=mc^2.
+\end{equation}
+
+\subsection{\label{app:subsec}A subsection in an appendix}
+
+You can use a subsection or subsubsection in an appendix. Note the
+numbering: we are now in Appendix~\ref{app:subsec}.
+
+\subsubsection{\label{app:subsubsec}A subsubsection in an appendix}
+Note the equation numbers in this appendix, produced with the
+subequations environment:
+\begin{subequations}
+\begin{eqnarray}
+E&=&mc, \label{appa}
+\\
+E&=&mc^2, \label{appb}
+\\
+E&\agt& mc^3. \label{appc}
+\end{eqnarray}
+\end{subequations}
+They turn out to be Eqs.~(\ref{appa}), (\ref{appb}), and (\ref{appc}).
+
+\nocite{*}
+\bibliography{aapmsamp}% Produces the bibliography via BibTeX.
+
+\end{document}
+%
+% ****** End of file aapmsamp.tex ******