diff options
Diffstat (limited to 'fonts/psfonts/w-a-schmidt')
42 files changed, 7420 insertions, 0 deletions
diff --git a/fonts/psfonts/w-a-schmidt/README b/fonts/psfonts/w-a-schmidt/README new file mode 100644 index 0000000000..2746106bfa --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/README @@ -0,0 +1,110 @@ +============================================================ + LaTeX support files for commercial Type1 fonts +============================================================ + Walter Schmidt + w-a-schmidt(at)gmx.net + +The material provided here serves to use various commercial +PostScript Type1 font families with LaTeX. Notice that the +actual font files are _not_ distributed from CTAN; they need +to be purchased. (Fonts marked with an asterisk can be +downloaded for free, even though they must not be +distributed via CTAN.) + +Each `font pack' is made up from a .zip archive accompanied +by a .txt file providing the related installation +instructions. In most cases the filenames reflect the +"canonical" names of the related font families. + +In a few cases, the related fontinst sources are provided, +too. These archives carry names ending with "-sources.zip". + +Each font pack may be distributed individually under the +conditions of the LaTeX Project Public License; see the +"legal notice" in the particular .txt file. + +Distributing the contents of a font pack in uncompressed +(=installed) form is generally not encouraged. If you +really need to do so (for instance, if you are distributing +also the related fonts), please contact me. + + + +SUPPLIER +Font family Files (.zip and .txt) +============================================================ + +ADOBE +Adobe Garamond pad +Aldus pas +Futura Light/Book/Bold/BoldCond. pfu +Stempel Garamond peg +Frutiger pfr +Melior pml +Minion pmn +Myriad pmy +Optima pop +Rotis pro +Sabon psb +Syntax psx + + +BERTHOLD +ConcordeBE poc +Berthold BaskervilleBQ qeb + + +BITSTREAM +Humanist 777 (Frutiger) bfr +Letter Gothic blg +Latin 725 (Meridien) bmd +News Gothic bng +Dutch 809 (Concorde) boc +Zapf Humanist 601 (Optima) bop +Zurich (Univers) bun +Venetian 301 (Centaur) bur + + +FONTFONT +Dingbests (*) dingbests +InterOffice (*) interoffice +QType Extended Book (*) qtype + + +LINOTYPE +Adobe Garamond LT pad +Aldus LT las +ITC Charter lch +Frutiger Next lf9 +FuturaLT Light/Book/Bold/BoldCond. pfu +Stempel Garamond LT leg +Meridien LT lmd +Melior LT lml +Minion lmn +Myriad pmy +ITC Officina Sans lo9 +Optima Nova (Regular+Italic only) ln9 +Sabon LT lsb +Syntax LT lsx +ITC Zapf Chancery LT lzc +Zapf Essentials LT lze +Zapfino One + Ornaments zap + + +MONOTYPE +TimesNR, NR Seven, Small Text mnt + + + +UNDERWARE +Dolly dolly + +============================================================ + +Changes: + +2008-09-29: Removed support files for Springer SMinion and +SMyriad, since the fonts are no longer available + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/bfr.txt b/fonts/psfonts/w-a-schmidt/bfr.txt new file mode 100644 index 0000000000..24718d5837 --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/bfr.txt @@ -0,0 +1,207 @@ +============================================================ + Bitstream Humanist 777 font pack for LaTeX +============================================================ + 2004-08-08 + Walter Schmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all required files for using the +Bitstream Humanist 777 (Frutiger) Type1 fonts with LaTeX on +the Un*x or PC platform. It does _not_ include the actual +Type1 fonts, which are to be purchased from Bitstream or +Corel. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + + + +Change Log +---------- +2004-08-08 + Fixed a potential bug in the macro package + +2003-10-08 + New package bfrutiger.sty and changed fd files to + support scaling. Metrics, VFs and map files are + unchanged. + +2003-06-24 + Changed ZIP file structure and directory layout. Updated + installation instructions wrt/ teTeX 2.0 and VTeX 8. Note + that the actual font metrics are unchanged! + +2002-07-21 + The Euro symbol, which is present in the in the latest + release of Bitstream's fonts, is supported. + + + +Installing the Type1 font files +------------------------------- +The Type1 font files are to be renamed for use with TeX. +The original file names may vary, depending on whether you +have acquired the font files from Bitstream or Corel: + +Bitstream: Corel: TeX: +0855A___.PFB HUM777L.PFB -> bfrl8a.pfb +0856A___.PFB HUM777LI.PFB -> bfrli8a.pfb +0857A___.PFB HUM777N.PFB -> bfrr8a.pfb +0858A___.PFB HUM777I.PFB -> bfrri8a.pfb +0859A___.PFB HUM777B.PFB -> bfrb8a.pfb +0860A___.PFB HUM777BI.PFB -> bfrbi8a.pfb +0861A___.PFB HUM777K.PFB -> bfrc8a.pfb +0862A___.PFB HUM777KI.PFB -> bfrci8a.pfb + +The .pfb files are to be copied to the directory + + texmf/fonts/type1/bitstrea/frutiger + +of your TeX system. The related .afm files are to be +renamed accordingly; install them into the directory + + texmf/fonts/afm/bitstrea/frutiger . + +You may need to create these directories first. + + + +Removing obsolete files +----------------------- +In case you install this collection over any previous release, +delete the file texmf/vtex/config/bfr.ali now. + +In case you install this collection over the 2000-06-26 +release, the directory + + texmf/tex/latex/bitstrea/frutiger/ + +and the file + + texmf/doc/latex/bitstrea/frutiger.pdf . + +are to be deleted manually. + + + +Installing the TeX support files from the archive bfr.zip +--------------------------------------------------------- +Unpack the ZIP archive bfr.zip in the directory "texmf" of +your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Certain TeX systems require manually updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the <Supplier> <Family> fonts. You need to configure +your TeX system so that these files are actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Hmanist777 is +"bfr.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files are installed using the shell +script "updmap". With teTeX-2.0 and later (or teTeX-beta as +of June 2002 and later) execute the following commands: + + texhash + updmap --enable Map bfr.map + +With earlier versions of teTeX, consult its documentation +how to add new map files to the system. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +bfr.ali. This is usually accomplished by putting a record +for bfr.ali into each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "bfr.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + bfr.ali + } + +In case you are still using VTeX/Free 7.x (as opposed to +v8.x), copy the file bfr.ali from texmf/fonts/map/vtex to +the directory texmf/vtex/config. + + + +Euro support +------------ +Using the Euro symbol of the Humansist 777 fonts with LaTeX +needs a recent version of the file 8r.enc. If your LaTeX +system includes at least version 9.0 of the PSNFSS +subsystem, this requirement is fulfilled. Otherwise you +should update the file 8r.enc; the current version is +available as <http://tug.org/fontname/8r.enc>. Copy this +file into the directory texmf/dvips/psnfss/ (or with +VTeX/Free into texmf/vtex/enc/). Make sure that there is no +other, possibly obsolete, instance of this file in any +directory below texmf/dvips! + + + +Using the Humanist 777 fonts with LaTeX +--------------------------------------- +See the file frutiger.txt, which resides in the directory +texmf/doc/fonts/bitstrea. + + + +Legal notice +----------- +The Humanist 777 font pack is made up from the files +bfr.txt and bfr.zip. + + Copyright (c) 2002--2004 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + +== finis + diff --git a/fonts/psfonts/w-a-schmidt/blg.txt b/fonts/psfonts/w-a-schmidt/blg.txt new file mode 100644 index 0000000000..c8475ffaf8 --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/blg.txt @@ -0,0 +1,184 @@ +============================================================ + Bitstream Letter Gothic font pack for LaTeX +============================================================ + 2004-07-22 + Walter Schmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all required files for using the +Bitstream "Letter Gothic 12 Pitch" Type1 fonts with LaTeX on +the Un*x or PC platform. It does _not_ include the actual +Type1 fonts, which are to be purchased from Bitstream. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX or VTeX/Free. Yet they may not +exactly fit your particular TeX system; please, consult its +documentation, too! The directory name "texmf" refers to +the root directory of a TDS directory tree. In case your +TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + + + +What's new? +----------- +2004-07-22 + changed location of font mapping files wrt/ TDS 1 specs + +2003-03-02 + fixed the asterisk characters, so that they are vertically + centered now; changed directory layout + + + +Removing obsolete files +----------------------- +In case you install this collection over any previous +release, delete the file texmf/vtex/config/blg.ali now. + + + +Installing the Type1 font files +------------------------------- +The Type1 font files are to be renamed for use with TeX. +The names of the original files may vary, depending on +whether you have got the fonts from Bitsream or Corel: + +Bitstream: Corel: TeX: +0414a___.pfb letgot12.pfb -> blgr8a.pfb +0532a___.pfb legot12i.pfb -> blgri8a.pfb +0533a___.pfb legot12b.pfb -> blgb8a.pfb +0543a___.pfb lego12bi.pfb -> blgbi8a.pfb + +The .pfb files are to be copied to the directory + + texmf/fonts/type1/bitstrea/lettrgth + +of your TeX system. The related .afm files should also be +renamed accordingly and installed into the directory + + texmf/fonts/afm/bitstrea/lettrgth + +You may need to create these directories first. + + + +Installing the TeX support files from the archive blg.zip +--------------------------------------------------------- +Unpack the ZIP archive blg.zip in the directory "texmf" of +your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the Bitstream LetterGothic fonts. You need to configure +your TeX system so that these files are actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for LetterGothic is +"blg.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files (here blg.map) are installed using +the shell script "updmap". With teTeX-2.0 and later (or +teTeX-beta as of June 2002 and later) execute the following +commands: + + texhash + updmap --enable Map blg.map + +With earlier versions of teTeX, consult its documentation +about how to add new map files to the system. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +blg.ali. This is usually accomplished by putting an +appropriate record ito each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "blg.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + blg.ali + } + +In case you are still using VTeX/Free 7.x (as opposed to +v8.x), copy the .ali file from texmf/fonts/map/vtex to the +directory texmf/vtex/config. + + + +Removing obsolete files +----------------------- +In case you install this package over the version from +2001-02-02, the directory + + texmf/tex/latex/bitstrea/lettrgth/ + +and the file + + texmf/doc/latex/bitstrea/lettrgth.pdf . + +are still to be deleted manually. Rationale: The macro +files reside in the directory texmf/tex/latex/blg now, +and the documentation has been moved to the directory +texmf/doc/fonts/bitstrea. Thus, unpacking of the .zip +archiv alone would not overwrite the obsolete files. + + + +Updating the filename database +------------------------------ +Certain TeX systems require manually updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Using the Letter Gothic fonts with LaTeX +----------------------------------------- +See the file lettrgth.txt, which should reside in the +directory texmf/doc/fonts/bitstrea. + + +Legal notice +------------ +The Letter Gothic font pack is made up from the files +blg.txt and blg.zip. + + Copyright (c) 2002--2004 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + +== finis diff --git a/fonts/psfonts/w-a-schmidt/bmd.txt b/fonts/psfonts/w-a-schmidt/bmd.txt new file mode 100644 index 0000000000..a5071b8e2f --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/bmd.txt @@ -0,0 +1,185 @@ +============================================================ + Bitstream Latin 725 font pack for LaTeX +============================================================ + 2004-07-22 + Walter Schmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all required files for using the +Bitstream Latin 725 (Meridien) Type1 fonts with LaTeX on the +Un*x or PC platform. It does _not_ include the actual Type1 +fonts, which are to be purchased from Bitstream. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult also its documentation as to installing additional +fonts and macros. The directory name "texmf" refers to the +root directory of a TDS directory tree. In case your TeX +systems has more than one directory tree, its documentation +should tell you where to install new files. + + + +What's new? +----------- +2004-07-22 + changed location of font mapping files wrt/ TDS 1 specs + +2002-04-22 + The metrics support the latest version of the fonts, + which include the Euro symbol. + + + +Installing the Type1 font files +------------------------------- +The Type1 font files are to be renamed for use with TeX. +The names of the original files may vary, so the following +table tells the related PostScript font names, too: + +Bitstream: TeX: FontName: +0493A___.PFB -> bmdb8a.pfb Latin725BT-Bold +0494A___.PFB -> bmdbi8a.pfb Latin725BT-BoldItalic +0491A___.PFB -> bmdm8a.pfb Latin725BT-Medium +0492A___.PFB -> bmdmi8a.pfb Latin725BT-MediumItalic +0489A___.PFB -> bmdr8a.pfb Latin725BT-Roman +0490A___.PFB -> bmdri8a.pfb Latin725BT-Italic + + +The .pfb files are to be copied to the directory + + texmf/fonts/type1/bitstrea/meridien + +of your TeX system. The related .afm files should also be +renamed accordingly and installed into the directory + + texmf/fonts/afm/bitstrea/meridien + +You may need to create these directories first. + + + +Installing the TeX support files from the archive bmd.zip +--------------------------------------------------------- +Unpack the ZIP archive bmd.zip in the directory "texmf" of +your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manually updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the Bitstream latin725 fonts. You need to configure +your TeX system so that these files are actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Latin725 is +"bmd.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files (here bmd.map) are installed using +the shell script "updmap". With teTeX-2.0 and later (or +teTeX-beta as of June 2002 and later) execute the following +commands: + + texhash + updmap --enable Map bmd.map + +With earlier versions of teTeX, consult its documentation +about how to add new map files to the system. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +bmd.ali. This is usually accomplished by putting an +appropriate record ito each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "bmd.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + bmd.ali + } + +In case you are still using VTeX/Free 7.x (as opposed to +v8.x), copy the .ali file from texmf/fonts/map/vtex to the +directory texmf/vtex/config. + + +Removing obsolete files +----------------------- +In case you install this collection over any previous +release, delete the file texmf/vtex/config/bmd.ali now +(unless you are uisng VTeX/Free version 7). + +In case you install this package over the version from +2000-10-21, the directory + + texmf/tex/latex/bitstrea/meridien/ + +and the file + + texmf/doc/latex/bitstrea/meridien.pdf . + +are still to be deleted manually. Rationale: The macro +files reside in the directory texmf/tex/latex/bmd now, and +the documentation has been moved to the directory +texmf/doc/fonts/bitstrea. Upon unpacking of the new ZIP +file, the above files are not overwritten automatically. + + + +Using the Latin 725 fonts with LaTeX +------------------------------------ +See the file meridien.txt, which should reside in the directory +texmf/doc/fonts/bitstrea. + + + +Legal notice +------------ +The Latin 725 font pack is made up from the files bmd.txt +and bmd.zip. + + Copyright (c) 2002--2004 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + +== finis diff --git a/fonts/psfonts/w-a-schmidt/bng.txt b/fonts/psfonts/w-a-schmidt/bng.txt new file mode 100644 index 0000000000..929586269b --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/bng.txt @@ -0,0 +1,198 @@ +=========================================================== + Bitstream News Gothic font pack for LaTeX +============================================================ + 2004-06-09 + WalterSchmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all files required to use the Bitstream +News Gothic Type1 fonts with LaTeX on the Un*x or PC +platform. It does _not_ include the actual Type1 fonts, +which are to be purchased from Bitstream. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + + + +What's new? +---------- +2004-06-09 + The Euro symbol is supported, if you have got a + sufficiently recent version of the fonts. + Minor improvements to the kerning tables. + Location of the font mapping files changed wrt/ TDS 1.0. + English documentation. + +2002-06-02: + Added kerning data for umlauts. + OT1-Encoding is no longer supported. + TDS-compliant archive structure + + + +Updating from a previous release +-------------------------------- +In case you install this collection over any previous +release, the file + + texmf/vtex/config/bng.ali + +is to be deleted manually + +In case you install this collection over the 2000-12-04 +release, the file + + texmf/doc/latex/bitstrea/newsgth.txt + +and the directories + + texmf/tex/latex/bitstrea/newsgth + texmf/fonts/tfm/bitstrea/newsgth + texmf/fonts/vf/bitstrea/newsgth + +are to be deleted manually. + + + +Installing the Type1 font files +------------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection, unless you +| actually intend to install new version of the fonts. +| + +The Type1 fonts, as supplied by Bitstream, are to be renamed +for use with TeX. The original file named may differ, +depending on whether you have obtained the fonts from +Bitstream or Corel: + +Bitstream: Corel: TeX: +0047A___.PFB newsgotn.pfb bngr8a.pfb +0048A___.PFB newsgoti.pfb bngri8a.pfb +0049A___.PFB newsgotb.pfb bngb8a.pfb +0050A___.PFB newgotbi.pfb bngbi8a.pfb +0949A___.PFB newsgotd.pfb bngd8a.pfb +0950A___.PFB newsgtdi.pfb bngdi8a.pfb + +Copy them to the directory + + texmf/fonts/type1/bitstrea/newsgth + +of your TeX system. Rename the .afm files accordingly +and copy them to: + + texmf/fonts/afm/bitstrea/newsgth + +Most likely, you will have to create these directories +first. + + + +Installing the TeX support files from the archive bng.zip +--------------------------------------------------------- +Unpack the ZIP archive bng.zip in the directory "texmf" of +your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the Bitstream News Gothic fonts. You need to configure +your TeX system so that these files are actually used. The +required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for News Gothic is +"bng.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map /dvips. + +Configuring teTeX +----------------- +Additional font map files (here bng.map) are installed using +the shell script "updmap". With teTeX-2.0 and later (or +teTeX-beta as of June 2002 and later) execute the following +commands: + + texhash + updmap --enable Map bng.map + +With earlier versions of teTeX, consult its documentation +how to install an additional map file. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +bng.ali. This is usually accomplished by putting an +appropriate record ito each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "bng.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + bng.ali + } + +In case you are still using VTeX/Free 7.x (as opposed to +v8.x), copy the file bng.ali from texmf/fonts/map/vtex to +the directory texmf/vtex/config. + + + +Using the Bitstream News Gothic fonts with LaTeX +------------------------------------------------ +See the file newsgth.txt, which resides in the directory +texmf/doc/fonts/bitstrea. + + + +Legal notice +------------ +The bundle "Bitstream News Gothic for LaTeX "is made up from +the files bng.txt and bng.zip. + + Copyright (c) 2000--2004 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + +== finis diff --git a/fonts/psfonts/w-a-schmidt/boc.txt b/fonts/psfonts/w-a-schmidt/boc.txt new file mode 100644 index 0000000000..c85ba5c75f --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/boc.txt @@ -0,0 +1,183 @@ +============================================================ + Bitstream Dutch 809 (Concorde) font pack for LaTeX +============================================================ + 2004-08-08 + Walter Schmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all files required to use the Bitstream +Dutch 809 (Concorde) Type1 fonts with LaTeX on the Un*x or +PC platform. It does, however, _not_ include the actual +Type1 fonts, which are to be purchased. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, fpTeX, MikTeX or VTeX/Free. The +directory name "texmf" refers to the root directory of the +TDS directory tree. In case your TeX systems has more than +one such directory tree, the documentation should tell you +where to install new files. + + + +Change Log +---------- +2004-08-08 + Fixed a potential bug in the macro package + +2004-01-15 + Improved kerning data. + Location of font map file boc.ali changed to + texmf/fonts/map/vtex/boc.ali. + bconcorde.sty: default scaling ratio changed to 92% + +2002-06-09 + Improved kerning data + +2002-04-03 + Change directory structure to comply with TDS. + New macros package bconcode.sty with changed user + interface. + + + +Removing obsolete files +----------------------- +In case you have installed the 2002-06-09 or 2002-04-03 +release of this collection, please delete the file + + texmf/vtex/config/boc.ali + +In case you have installed the 2001-03-13 release of this +collection, please delete the directoriy + + texmf/tex/latex/bitstrea/concorde/ + +and files + + texmf/doc/latex/bitstrea/concorde.txt + texmf/vtex/config/boc.ali + + + +Installing the Type1 font files +------------------------------- +The Type1 font files are to be renamed for use with TeX. +The original file names may vary, depending on whether you +have acquired the font files from Bitstream or Corel: + +FontName: Bitstream: Corel: TeX: +Dutch809BT-RomanC 1061a___.pfb dut809n.pfb bocr8a.pfb +Dutch809BT-ItalicC 1062a___.pfb dut809i.pfb bocri8a.pfb +Dutch809BT-BoldC 1063a___.pfb dut809b.pfb bocb8a.pfb + +The .pfb files are to be copied to the directory + + texmf/fonts/type1/bitstrea/concorde + +of your TeX system. The related .afm files are to be +renamed accordingly; install them into the directory + + texmf/fonts/afm/bitstrea/concorde . + +You may need to create these directories first. + + + +Installing the TeX support files from the archive boc.zip +--------------------------------------------------------- +Unpack the ZIP archive boc.zip in the directory "texmf" of +your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Certain TeX systems require manually updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the <Supplier> <Family> fonts. You need to configure +your TeX system so that these files are actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX + * VTeX/Free + +As far as other TeX systems such as MikTeX are concerned, +consult the documentation how to configure the programs of +the TeX system to use the additional font map file boc.map. +Two copies of this file reside in the directories +texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files are installed using the shell +script "updmap". With teTeX-2.0 and later (or teTeX-beta as +of June 2002 and later) execute the following commands: + + texhash + updmap --enable Map boc.map + +With earlier versions of teTeX, consult its documentation +how to use the "updmap" script. In case your version of +teTeX has no such script at all, please conslt the teTeX +docmentation how to install the additional map file boc.map. + +Configuring VTeX/Free (v8.00 and later) +--------------------------------------- +Make VTeX read the additional font map ("aliasing") file +boc.ali. This is usually accomplished by putting a record +for boc.ali into each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "boc.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + boc.ali + } + + + +Using the Dutch 809 fonts with LaTeX +------------------------------------ +See the file concorde.txt, which resides in the directory +texmf/doc/fonts/bitstrea. + + + +Legal notice +------------ +The "Dutch 809" font pack is made up from the files +boc.txt and boc.zip. + + Copyright (c) 2000--2004 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + +== finis diff --git a/fonts/psfonts/w-a-schmidt/bop.txt b/fonts/psfonts/w-a-schmidt/bop.txt new file mode 100644 index 0000000000..23c2a8d470 --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/bop.txt @@ -0,0 +1,195 @@ +============================================================ + Bitstream Zapf Humanist 601 (Optima) font pack for LaTeX +============================================================ + 2004-08-08 + Walter Schmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all required files for using the +Bitstream Zapf Humanist 601 (Optima) Type1 fonts with LaTeX +on the Un*x or PC platform. It does, however, _not_ include +the actual Type1 fonts, which are to be purchased. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, fpTeX, MikTeX or VTeX/Free. The +directory name "texmf" refers to the root directory of the +TDS directory tree. In case your TeX systems has more than +one such directory tree, the documentation should tell you +where to install new files. + + + +Change Log +---------- +2004-08-08 + Fixed a potential bug in the macro package + +2004-07-26 + New macro package boptima.sty, which supports + scaling and use of the "bopm" family as options + +2004-01-13 + The metrics support version 003.001 or later of the fonts, + which includes the Euro symbol. + +???-??-?? + Changed directory structure. + OT1 encoding no longer supported. + + + +Updating from a previous release +-------------------------------- +In case you have installed any previous version of this +bundle, please delete the following file manually, before +installing the current one: + + texmf/vtex/config/bop.ali + +In case you have installed the Jan.2000 release of this +package, please delete the directory + + texmf/tex/latex/bitstrea/optima/ + +and the files + + texmf/doc/latex/bitstrea/optima.pdf + texmf/fonts/tfm/bitstrea/optima/* + texmf/fonts/vf/bitstrea/optima/* + +manually, before installing the the current version. + +Rationale: +The directory structure has changed, so that installing the +new files would not automatically overwrite the old ones. +Also, several file names have changed, and a number of files +are no longer included at all. Many apologies for the +inconvenience! + + + +Installing the Type1 font files +------------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection, unless you +| actually intend to install new version of the fonts. +| + +The Type1 font files are to be renamed for use with TeX. +The original file names may vary, depending on whether you +have acquired the font files from Bitstream or Corel: + +Bitstream: Corel: TeX: +0015A___.PFB zhum601n.pfb -> bopr8a.pfb +0016A___.PFB zhum601i.pfb -> bopri8a.pfb +0017A___.PFB zhum601b.pfb -> bopb8a.pfb +0018A___.PFB zhu601bi.pfb -> bopbi8a.pfb +0134A___.PFB zhum601d.pfb -> bopd8a.pfb +0135A___.PFB zhu601di.pfb -> bopdi8a.pfb + +The .pfb files are to be copied to the directory + + texmf/fonts/type1/bitstrea/optima + +of your TeX system. The related .afm files are to be +renamed accordingly; install them into the directory + + texmf/fonts/afm/bitstrea/optima . + +You may need to create these directories first. + + + +Installing the TeX support files from the archive bop.zip +--------------------------------------------------------- +Unpack the ZIP archive bop.zip in the directory "texmf" of +your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Certain TeX systems require manually updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| You need not repeat these steps, when updating from a +| previous release of this collection! + +The following steps vary, according to your TeX system. +There are different sets of instructions provided for + + * teTeX + * VTeX/Free + +As far as other TeX systems such as MikTeX are concerned, +consult the documentation how to configure the programs of +the TeX system to use the additional font map file bop.map. +Two copies of this file reside in the directories +texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files are installed using the shell +script "updmap". With teTeX-2.0 and later (or teTeX-beta as +of June 2002 and later) execute the following commands: + + texhash + updmap --enable Map bop.map + +With earlier versions of teTeX, consult its documentation +how to use the "updmap" script. In case your version of +teTeX has no such script at all, please conslt the teTeX +docmentation how to install the additional map file bop.map. + +Configuring VTeX/Free (v8.00 and later) +--------------------------------------- +Make VTeX read the additional font map ("aliasing") file +bop.ali. This is usually accomplished by putting a record +for bop.ali into each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "bop.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + bop.ali + } + + + +Using the Zapf Humanist 601 fonts with LaTeX +-------------------------------------------- +See the file optima.txt, which resides in the directory +texmf/doc/fonts/bitstrea. + + + +Legal notice +------------ +The "Zapf Humanist 601" font pack is made up from the files +bop.txt and bop.zip. + + Copyright (c) 2004 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + +== finis diff --git a/fonts/psfonts/w-a-schmidt/bun.txt b/fonts/psfonts/w-a-schmidt/bun.txt new file mode 100644 index 0000000000..077a42884b --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/bun.txt @@ -0,0 +1,176 @@ +========================================================== + Bitstream Zurich font pack as of 2003-08-08 +============================================================ + Walter Schmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all required files for using the +Bitstream "Zurich" (= Univers) Type1 fonts with LaTeX on +the Un*x or PC platform. It does _not_ include the actual +Type1 fonts, which are to be purchased from Bitstream or +Corel. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + + + +Change Log +---------- +2004-08-08 + Fixed a potential bug in the macro package + +2003-06-03 + Changed ZIP file structure and directory layout. Updated + installation instructions wrt/ teTeX 2.0 and VTeX 8. Note + that the actual font metrics are unchanged! + + + +Installing the Type1 font files +------------------------------- +The Type1 font files as supplied by Bitstream or Corel are +to be renamed for use with TeX. + +Bitstream: Corel TeX +0176a___.pfb zurchl.pfb -> bunl8a.pfb +0177a___.pfb zurchli.pfb -> bunli8a.pfb +0178a___.pfb zurchn.pfb -> bunr8a.pfb +0179a___.pfb zurchi.pfb -> bunri8a.pfb +0180a___.pfb zurchb.pfb -> bunb8a.pfb +0181a___.pfb zurchbi.pfb -> bunbi8a.pfb +0182a___.pfb zurchk.pfb -> bunc8a.pfb +0183a___.pfb zurchki.pfb -> bunci8a.pfb +0260a___.pfb zurche.pfb -> bunr8ax.pfb +0261a___.pfb zurchbe.pfb -> bunb8ax.pfb +0262a___.pfb zurchke.pfb -> bunc8ax.pfb +0263a___.pfb zurchuke.pfb -> bunu8ax.pfb +0296a___.pfb zurchlc.pfb -> bunl8an.pfb +0297a___.pfb zurchlci.pfb -> bunli8an.pfb +0298a___.pfb zurch.pfb -> bunr8an.pfb +0299a___.pfb zurchci.pfb -> bunri8an.pfb +0300a___.pfb zurchbc.pfb -> bunb8an.pfb +0301a___.pfb zurchbci.pfb -> bunbi8an.pfb +0958a___.pfb zurchlxc.pfb -> bunl8aq.pfb +0959a___.pfb zurchxc.pfb -> bunr8aq.pfb +0960a___.pfb zurchbxc.pfb -> bunb8aq.pfb +0970a___.pfb zurchxk.pfb -> bunu8a.pfb + +The .pfb files are to be copied to the directory + + texmf/fonts/type1/bitstrea/univers + +of your TeX system. The related .afm files should also be +renamed accordingly and installed into the directory + + texmf/fonts/afm/bitstrea/univers + +Most likely, you need to create these directories first. + + +Installing the TeX support files from the archive bun.zip +--------------------------------------------------------- +Unpack the ZIP archive bun.zip in the directory "texmf" of +your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Certain TeX systems require manually updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the Bitstream Zurich fonts. You need to configure +your TeX system so that these files are actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Zurich is +"bun.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files (here bun.map) are installed using +the shell script "updmap". With teTeX-2.0 and later (or +teTeX-beta as of June 2002 and later) execute the following +commands: + + texhash + updmap --enable Map bun.map + +With earlier versions of teTeX, consult its documentation +about how to add new map files to the system. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +bun.ali. This is usually accomplished by putting an +appropriate record ito each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "bun.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + bun.ali + } + +In case you are still using VTeX/Free 7.x (as opposed to +v8.x), copy the .ali file from texmf/fonts/map/vtex to the +directory texmf/vtex/config. + + + +Using the Univers fonts with LaTeX +---------------------------------- +See the file univers.txt, which should reside in the directory +texmf/doc/fonts/bitstrea + + + +Legal notice +------------ +The Univers font pack is made up from the files bun.txt and +bun.zip. + + Copyright (c) 2002, 2003 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + +== finis diff --git a/fonts/psfonts/w-a-schmidt/bur.txt b/fonts/psfonts/w-a-schmidt/bur.txt new file mode 100644 index 0000000000..229d18f3a2 --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/bur.txt @@ -0,0 +1,180 @@ +=========================================================== + Bitstream Venentian 301 (Centaur) font pack + for LaTeX +============================================================ + 2004-07-22 + WalterSchmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all files required to use Bitstreams's +"Venetian 301" font family in Type1 format with LaTeX on the +Un*x or PC platform. It does _not_ include the actual Type1 +fonts, which are to be purchased from Bitstream or Corel. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + + +Change log +---------- +2004-07-22 + changed location of font mapping files wrt/ TDS 1 specs + + + +Removing obsolete files +----------------------- +In case you install this package over the version from +2000-06-29, the directory + + texmf/tex/latex/bitstrea/centaur/ + +and the files + + texmf/doc/latex/bitstrea/centaur.pdf + texmf/vtex/config/bur.ali + +are to be deleted manually. Rationale: The macro files +reside in the directory texmf/tex/latex/blg now, the +location of the font mapping file for VTeX has been +cgangedwrt/ TDS 1.0, and the documentation has been moved to +the directory texmf/doc/fonts/bitstrea. Thus, unpacking of +the new .zip archiv alone would not overwrite the obsolete +files. + + + +Installing the Type1 font files +------------------------------- +The Type1 fonts, as supplied by Bitstrem or Corel are to be +renamed for use with TeX. + +Bitstream: Corel: TeX: +1095A___.PFB ven301n.pfb -> burr8a.pfb +1096A___.PFB ven301i.pfb -> burri8a.pfb +1097A___.PFB ven301d.pfb -> burd8a.pfb +1098A___.PFB ven301di.pfb -> burdi8a.pfb +1099A___.PFB ven301b.pfb -> burb8a.pfb +1100A___.PFB ven301bi.pfb -> burbi8a.pfb + +Copy them to the directory + + texmf/fonts/type1/bitstrea/centaur + +of your TeX system. Rename the .afm files accordingly and +copy them to: + + texmf/fonts/afm/bitstrea/centaur + +Most likely, you will have to create these directories +first. + + + +Installing the TeX support files from the archive bur.zip +--------------------------------------------------------- +Unpack the ZIP archive bur.zip in the directory "texmf" +of your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the Bitstream Venetian301 fonts. You need to configure +your TeX system so that these files are actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Venetian301 is +"bur.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files (here bur.map) are installed using +the shell script "updmap". With teTeX-2.0 and later (or +teTeX-beta as of June 2002 and later) execute the following +commands: + + texhash + updmap --enable Map bur.map + +With earlier versions of teTeX, consult its documentation +about how to add new map files to the system. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +bur.ali. This is usually accomplished by putting an +appropriate record ito each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "bur.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + bur.ali + } + +In case you are still using VTeX/Free 7.x (as opposed to +v8.x), copy the .ali file from texmf/fonts/map/vtex to the +directory texmf/vtex/config. + + + +Using the Venetian301 fonts with LaTeX +-------------------------------------- +See the file centaur.txt, which resides in the directory +texmf/doc/fonts/bitstrea. + + + +Legal notice +------------ +The "Bitstream Venetian 301" font pack for LaTeX "is made up +from the files bur.txt and bur.zip. + + Copyright (c) 2000--2003 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/dingbests.txt b/fonts/psfonts/w-a-schmidt/dingbests.txt new file mode 100644 index 0000000000..d507d93910 --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/dingbests.txt @@ -0,0 +1,178 @@ +=========================================================== + FontFont Dingbests font pack for LaTeX +============================================================ + 2004-09-22 + WalterSchmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all files required to use the FontFont +Dingbests (*) Type1 fonts (version 004.460) with LaTeX on +the Un*x or PC platform. It does _not_ include the actual +Type1 font, which can be downloaded for free from +FontFonts's web site. + +(*) Indeed, the name of the font family is "Dingbests" with +an "s"; in contrast to what is indicated on the www page. +See also the font family name inside the afm file! + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + + + +In case you have istalled the previous release (2002-06-02) +----------------------------------------------------------- +... of this collection, it must be deleted entirely, before +the present one can be installed. Remove the following +files, as far as they actually exist: + + texmf/fonts/tfm/public/misc/dingbest.tfm + texmf/tex/latex/misc/udingbest.fd + texmf/doc/latex/misc/dingbest.pdf + texmf/dvips/config/dingbest.map + texmf/dvips/local/dingbest.map + texmf/vtex/config/dingbedst.ali + +Remove also the obsolete font files; the font has been +updated in the meantime: + + texmf/fonts/type1/public/misc/dingbest.pfb + texmf/fonts/afm/public/misc/dingbest.afm + +Remove the font mapping information for the old Dingbests +fomt from the configuration data for dvips, pdfTeX and/or +VTeX. + + + +Downloading and installing the Type1 font file +---------------------------------------------- +Download the font FF Dingbests in `PC, PostScript' format +via <http://www.fontfont.com/downloads.html>. You will +receive a ZIP archive named wint1.zip. + +Alternatively, the archive can be downloaded immediately: +<http://www.fontfont.com/downloads/ffdingbest/wint1.zip> + +Unpack wint1.zip. in a temporary directory. The Type1 +font, i.e., the file + + Dingbest.pfb + +must be moved to the directory + + texmf/fonts/type1/fontfont/dingbests + +of your TeX system. Move the related .afm files accordingly +to: + + texmf/fonts/afm/fontfont/dingbests + +Most likely, you will have to create these directories +first. + + + +Installing the TeX support files from the archive dingbests.zip +--------------------------------------------------------------- +Unpack the ZIP archive dingbests.zip in the directory +"texmf" of your TeX system; thus, all files will be copied +to the appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +The present distribution includes several font map files for +the FontFont InterOffice fonts. You need to configure your +TeX system so that an appropriate file is actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for InterOffice is +"dingbests.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files (here dingbests.map) are +installed using the shell script "updmap". With teTeX-2.0 +and later (or teTeX-beta as of June 2002 and later) execute +the following commands: + + texhash + updmap --enable Map dingbests.map + +With earlier versions of teTeX, consult its documentation +about how to add new map files to the system. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +dingbests.ali. This is usually accomplished by putting an +appropriate record ito each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "dingbests.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + dingbests.ali + } + +In case you are still using VTeX/Free 7.x (as opposed to +v8.x), copy the .ali file from texmf/fonts/map/vtex to the +directory texmf/vtex/config. + + + +Using the FF Dingbests font with LaTeX +-------------------------------------- +See the file dingbests.pdf, which should have been installed +in the directory texmf/doc/fonts/fontfont of your TeX +system. + + + +Legal notice +------------ +The bundle "FontFont Dingbests for LaTeX "is made up from +the files dingbests.txt and dingbests.zip. + + Copyright (c) 2004 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/dolly.txt b/fonts/psfonts/w-a-schmidt/dolly.txt new file mode 100644 index 0000000000..4e31d3c900 --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/dolly.txt @@ -0,0 +1,160 @@ +=========================================================== + "Dolly" font pack for LaTeX +============================================================ + 2004-07-22 + WalterSchmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all required files to use the "Dolly" +Type1 fonts with LaTeX on Un*x or PC platform. It does +_not_ include the actual Type1 fonts, which are distributed +by Underware <http://www.underware.nl>. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. The +directory name "texmf" refers to the root directory of the +TDS directory tree. In case your TeX systems has more than +one such directory tree, the documentation should tell you +where to install new files. + + + +Change log +----------- +2004-07-22 + Changed location of font map file for dvips wrt/ TDS 1.0. + +2003-05-29 + Virtual fonts re-made with newer version of fontinst, + thus avoiding many small deficiencies. + Changed location of font mapping file for VTeX, wrt/ TDS + 1.0 and VTeX/Free 8.x. + The font map files are unchanged. + + + +Installing the Type1 font files +------------------------------- +The Type1 font files + + dollb___.pfb + dolli___.pfb + dollr___.pfb + dollsc__.pfb + +are to be copied to the directory + + texmf/fonts/type1/undrware/dolly + +of your TeX system, and the related .afm files should go +into + + texmf/fonts/afm/undrware/dolly . + +You may need to create these directories first. (Note that +the directory name is "undrware", not "underware".) +On Unix, make sure that the file names are all lower-case! + + + +Installing the TeX support files from the archive dolly.zip +----------------------------------------------------------- +Unpack the ZIP archive dolly.zip in the directory "texmf" +of your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the Dolly fonts. You need to configure your TeX system +so that these files are actually used. The required steps +depend on the particular TeX system. Particular sets of +instructions are provided below for the following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Dolly is +"dolly.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files (here dolly.map) are installed using +the shell script "updmap". With teTeX-2.0 and later (or +teTeX-beta as of June 2002 and later) execute the following +commands: + + texhash + updmap --enable Map dolly.map + +With earlier versions of teTeX, consult its documentation +about how to add new map files to the system. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +dolly.ali. This is usually accomplished by putting an +appropriate record ito each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "dolly.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + dolly.ali + } + +In case you are still using VTeX/Free 7.x (as opposed to +v8.x), copy the .ali file from texmf/fonts/map/vtex to the +directory texmf/vtex/config. + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Using the Dolly fonts with LaTeX +--------------------------------- +See the file dolly.txt, which should reside in the +directory texmf/doc/fonts/undrware. + + + +Legal notice +------------ +The Dolly font pack is made up from the files dolly.txt and +dolly.zip. + + Copyright (c) 2002, 2003 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/interoffice.txt b/fonts/psfonts/w-a-schmidt/interoffice.txt new file mode 100644 index 0000000000..f628220282 --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/interoffice.txt @@ -0,0 +1,162 @@ +=========================================================== + FontFont InterOffice font pack for LaTeX +============================================================ + 2004-09-22 + WalterSchmidt + w-a-schmidt(at)gmx.net + + +This bundle includes all files required to use the FontFont +InterOffice Type1 fonts with LaTeX on the Un*x or PC +platform. It does _not_ include the actual Type1 fonts, +which can be downloaded for free from FontFont's web site. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + + + +Downloading and installing the Type1 font files +----------------------------------------------- +Download FF InterOffice in `Windows, PostScript' format via +<http://www.fontfont.com/downloads.html>. You will receive +a ZIP archive named FF_InterOffice_PC_T1.zip. + +Alternatively, the archive can be downloaded immediately: +<http://www.fontfont.com/downloads/FF_InterOffice_PC_T1.zip> + +Unpack FF_InterOffice_PC_T1.zip. in a temporary directory. +The Type1 fonts, i.e., the files + + InOfOne_.pfb + InOfTwo_.pfb + +must be moved to the directory + + texmf/fonts/type1/fontfont/interoffice + +of your TeX system. Move the related .afm files accordingly +to: + + texmf/fonts/afm/fontfont/interoffice + +Most likely, you will have to create these directories +first. + + + +Installing the TeX support files from the archive +interoffice.zip +------------------------------------------------- +Unpack the ZIP archive interoffice.zip in the directory +"texmf" of your TeX system; thus, all files will be copied +to the appropriate directories. + + + +Installing the original documentation +------------------------------------- +Store the file FF_InterOffice.pdf, which comes together with +the fonts, in the directory + + texmf/doc/fonts/fontfont + +of yor TeX system. (The directory shoukd have been created +in the previous step.) + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +The present distribution includes several font map files for +the FontFont InterOffice fonts. You need to configure your +TeX system so that an appropriate file is actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for InterOffice is +"interoffice.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files (here interoffice.map) are +installed using the shell script "updmap". With teTeX-2.0 +and later (or teTeX-beta as of June 2002 and later) execute +the following commands: + + texhash + updmap --enable Map interoffice.map + +With earlier versions of teTeX, consult its documentation +about how to add new map files to the system. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +interoffice.ali. This is usually accomplished by putting an +appropriate record ito each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "interoffice.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + interoffice.ali + } + +In case you are still using VTeX/Free 7.x (as opposed to +v8.x), copy the .ali file from texmf/fonts/map/vtex to the +directory texmf/vtex/config. + + + +Using the InterOffice fonts with LaTeX +-------------------------------------- +See the filesa interoffice.txt and FF_InterOffice.pdf, which +should have been installed in the directory +texmf/doc/fonts/fontfont of your TeX system + + + +Legal notice +------------ +The bundle "FontFont InterOffice for LaTeX "is made up from +the files interoffice.txt and interoffice.zip. + + Copyright (c) 2004 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/las.txt b/fonts/psfonts/w-a-schmidt/las.txt new file mode 100644 index 0000000000..19311f83cf --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/las.txt @@ -0,0 +1,157 @@ +============================================================ + Linotype Aldus font pack for LaTeX +============================================================ + 2003-07-14 + WalterSchmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all files required to use Linotype's +Aldus PostScript fonts with LaTeX on the Un*x or PC +platform. It does _not_ include the actual Type1 fonts, +which are to be purchased from Linotype. See below for the +list of all fonts used. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + +| On VTeX, you should not install both Linotype's and +| Adobe's Aldus fonts simultaneously. Rationale: Part of +| the fonts in both collections are identical, and +| installing distinct font files with the same internal +| FontNames is likely to confuse the PostScript interpreter +| (GeX) + + + +Installing the Type1 font files +------------------------------- +The Type1 fonts, as supplied by Linotype, are to be renamed +for use with TeX: + +FontName: Linotype: TeX: +AldusLT-Roman lte52121.pfb -> lasr8a.pfb +AldusLT-Italic lte52122.pfb -> lasri8a.pfb +Aldus-ItalicOsF afiof___.pfb -> lasrij8a.pfb +Aldus-RomanSC afrsc___.pfb -> lasrc8a.pfb + +Copy them to the directory + + texmf/fonts/type1/linotype/aldus + +of your TeX system. Rename the .afm files accordingly +and copy them to: + + texmf/fonts/afm/linotype/aldus + +Most likely, you will have to create these directories +first. + + + +Installing the TeX support files from the archive las.zip +--------------------------------------------------------- +Unpack the ZIP archive las.zip in the directory "texmf" +of your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the Linotype Aldus fonts. You need to configure +your TeX system so that these files are actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Aldus is +"las.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files (here las.map) are installed using +the shell script "updmap". With teTeX-2.0 and later (or +teTeX-beta as of June 2002 and later) execute the following +commands: + + texhash + updmap --enable Map las.map + +With earlier versions of teTeX, consult its documentation +about how to add new map files to the system. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +las.ali. This is usually accomplished by putting an +appropriate record ito each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "las.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + las.ali + } + +In case you are still using VTeX/Free 7.x (as opposed to +v8.x), copy the .ali file from texmf/fonts/map/vtex to the +directory texmf/vtex/config. + + + +Using the Linotype Aldus fonts with LaTeX +-------------------------------------- +See the file aldus.txt, which resides in the directory +texmf/doc/fonts/linotype + + + +Legal notice +------------ +The bundle "Linotype Aldus for LaTeX "is made up from the files +las.txt and las.zip. + + Copyright (c) 2002--2003 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/lch.txt b/fonts/psfonts/w-a-schmidt/lch.txt new file mode 100644 index 0000000000..e5af4bf3e2 --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/lch.txt @@ -0,0 +1,158 @@ +=========================================================== + Linotype ITC Charter font pack for LaTeX +============================================================ + 2003-05-31 + WalterSchmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all files required to use Linotype's +"ITC Charter" PostScript fonts with LaTeX on the Un*x or PC +platform. It does _not_ include the actual Type1 fonts, +which are to be purchased from Linotype. See below for the +list of all fonts used. + +Notice that the present support files were created from the +version of the IT Charter fonts, that was provided in +version 1.6 of the Linotype Library and on the Gold Edition +CD-ROM 1.6. They cannot be used with earlier version of the +fonts. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + + + +Installing the Type1 font files +------------------------------- +The Type1 fonts, as supplied by Linotype, are to be renamed +for use with TeX: + +FontName: Linotype file name TeX file name +CharterITC-ReguSC c092813t.pfb lchrc8a.pfb +CharterITC-BoldSC c092816t.pfb lchbc8a.pfb +CharterITC-Bold lt_70595.pfb lchb8a.pfb +CharterITC-BoldItal lt_70598.pfb lchbi8a.pfb +CharterITC-Regu lt_70604.pfb lchr8a.pfb +CharterITC-ReguItal lt_70607.pfb lchri8a.pfb + +Copy them to the directory + + texmf/fonts/type1/linotype/charter + +of your TeX system. Rename the .afm files accordingly +and copy them to: + + texmf/fonts/afm/linotype/charter + +Most likely, you will have to create these directories +first. + + + +Installing the TeX support files from the archive lch.zip +--------------------------------------------------------- +Unpack the ZIP archive lch.zip in the directory "texmf" +of your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the Linotype ITC Charter fonts. You need to configure +your TeX system so that these files are actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for TIC Charter is +"lch.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files (here lch.map) are installed using +the shell script "updmap". With teTeX-2.0 and later (or +teTeX-beta as of June 2002 and later) execute the following +commands: + + texhash + updmap --enable Map lch.map + +With earlier versions of teTeX, consult its documentation +about how to add new map files to the system. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +lch.ali. This is usually accomplished by putting an +appropriate record ito each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "lch.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + lch.ali + } + +In case you are still using VTeX/Free 7.x (as opposed to +v8.x), copy the .ali file from texmf/fonts/map/vtex to the +directory texmf/vtex/config. + + + +Using the Linotype ITC Charter fonts with LaTeX +----------------------------------------------- +See the file charter.txt, which resides in the directory +texmf/doc/fonts/linotype. + + + +Legal notice +------------ +The "Linotype ITC Charter font pack" is made up from +the files lch.txt and lch.zip. + + Copyright (c) 2003 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/leg.txt b/fonts/psfonts/w-a-schmidt/leg.txt new file mode 100644 index 0000000000..33fc8b3bef --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/leg.txt @@ -0,0 +1,168 @@ +============================================================ + Linotype Stempel Garamond font pack for LaTeX +============================================================ + 2003-06-24 + WalterSchmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all files required to use Linotype's +Stempel Garamond PostScript fonts with LaTeX on the Un*x or +PC platform. It does _not_ include the actual Type1 fonts, +which are to be purchased from Linotype. See below for the +list of all fonts used. + +Notice that the present support files were created from the +version of the Garamond fonts, that was provided in version +1.6 of the Linotype Library and on the Gold Edition CD-ROM +1.6. They cannot be used with earlier version of the fonts. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + +| On VTeX, you should not install both Linotype's and +| Adobe's Stempel Garamond fonts simultaneously. +| Rationale: Part of the fonts in both collections are +| identical, and installing distinct font files with the +| same internal FontNames is likely to confuse the +| PostScript interpreter (GeX) + + + +Installing the Type1 font files +------------------------------- +The Type1 fonts, as supplied by Linotype, are to be renamed +for use with TeX: + +PostScript Linotype TeX +FontName: file name: file name: + +StempelGaramondLT-Roman lte50277.pfb legr8a.pfb +StempelGaramondLT-Italic lte50278.pfb legri8a.pfb +StempelGaramondLT-Bold lte50279.pfb legb8a.pfb +StempelGaramondLT-BoldItalic lte50280.pfb legbi8a.pfb +StempelGaramond-RomanSC gsrsc___.pfb legrc8a.pfb +StempelGaramond-ItalicOsF gsiof___.pfb legrij8a.pfb +StempelGaramond-BoldOsF gsbof___.pfb legbj8a.pfb +StempelGaramond-BoldItalicOsF gsbio___.pfb legbij8a.pfb + +Copy them to the directory + + texmf/fonts/type1/linotype/stgaramo + +of your TeX system. Rename the .afm files accordingly +and copy them to: + + texmf/fonts/afm/linotype/stgaramo + +Most likely, you will have to create these directories +first. + + + +Installing the TeX support files from the archive leg.zip +--------------------------------------------------------- +Unpack the ZIP archive leg.zip in the directory "texmf" +of your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the Linotype Stempel Garamond fonts. You need to +configure your TeX system so that these files are actually +used. The required steps depend on the particular TeX +system. Particular sets of instructions are provided below +for the following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Stempel Garamond is +"leg.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files (here leg.map) are installed using +the shell script "updmap". With teTeX-2.0 and later (or +teTeX-beta as of June 2002 and later) execute the following +commands: + + texhash + updmap --enable Map leg.map + +With earlier versions of teTeX, consult its documentation +about how to add new map files to the system. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +leg.ali. This is usually accomplished by putting an +appropriate record ito each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "leg.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + leg.ali + } + +In case you are still using VTeX/Free 7.x (as opposed to +v8.x), copy the .ali file from texmf/fonts/map/vtex to the +directory texmf/vtex/config. + + + +Using the Linotype Stempel Garamond fonts with LaTeX +----------------------------------------------------- +See the file stgaramo.txt, which resides in the directory +texmf/doc/fonts/linotype. + + + +Legal notice +------------ +The bundle "Linotype Stempel Garamond for LaTeX "is made up +from the files leg.txt and leg.zip. + + Copyright (c) 2003 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/lf9.txt b/fonts/psfonts/w-a-schmidt/lf9.txt new file mode 100644 index 0000000000..1b810e1afe --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/lf9.txt @@ -0,0 +1,165 @@ +=========================================================== + Linotype Frutiger Next font pack for LaTeX +============================================================ + 2004-10-12 + WalterSchmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all files required to use the Linotype +Frutiger Next Type1 fonts with LaTeX on the Un*x or PC +platform. It does _not_ include the actual Type1 fonts, +which are to be purchased from Linotype. + +| This is a preliminary releasse, which supports only the +| regular, medium and bold font series. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + + + +Installing the Type1 font files +------------------------------- +The Type1 fonts, as supplied by Linotype, are to be +renamed for use with TeX: + +Linotype file name --> TeX file name +FrutigerNextLT-Black.pfb lf9c8a.pfb +FrutigerNextLT-BlackCond.pfb lf9c8ac.pfb +FrutigerNextLT-BlackItalic.pfb lf9ci8a.pfb +FrutigerNextLT-Bold.pfb lf9b8a.pfb +FrutigerNextLT-BoldCond.pfb lf9b8ac.pfb +FrutigerNextLT-BoldItalic.pfb lf9bi8a.pfb +FrutigerNextLT-Heavy.pfb lf9h8a.pfb +FrutigerNextLT-HeavyCond.pfb lf9h8ac.pfb +FrutigerNextLT-HeavyItalic.pfb lf9hi8a.pfb +FrutigerNextLT-Light.pfb lf9l8a.pfb +FrutigerNextLT-LightCond.pfb lf9l8ac.pfb +FrutigerNextLT-LightItalic.pfb lf9li8a.pfb +FrutigerNextLT-Medium.pfb lf9m8a.pfb +FrutigerNextLT-MediumCond.pfb lm9m8ac.pfb +FrutigerNextLT-MediumItalic.pfb lf9mi8a.pfb +FrutigerNextLT-Regular.pfb lf9r8a.pfb +FrutigerNextLT-RegularCond.pfb lf9r8ac.pfb +FrutigerNextLT-RegularItalic.pfb lf9ri8a.pfb + +Copy them to the directory + + texmf/fonts/type1/linotype/frutigernext + +of your TeX system. Rename the .afm files accordingly +and copy them to: + + texmf/fonts/afm/linotype/frutigernext + +Most likely, you will have to create these directories +first. + +It is recommended to install _all_ above fonts, even though +the "light", "heavy" and "black" series are not yet +supported. + + + +Installing the TeX support files from the archive lf9.zip +--------------------------------------------------------- +Unpack the ZIP archive lf9.zip in the directory "texmf" of +your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +The present distribution includes several font map files for +the Linotype Frutiger Next fonts. You need to configure +your TeX system so that an appropriate file is actually +used. The required steps depend on the particular TeX +system. Particular sets of instructions are provided below +for the following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Frutiger Next is +"lf9.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files (here lf9.map) are installed using +the shell script "updmap". With teTeX-2.0 and later (or +teTeX-beta as of June 2002 and later) execute the following +commands: + + texhash + updmap --enable Map lf9.map + +With earlier versions of teTeX, consult its documentation +about how to add new map files to the system. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +lf9.ali. This is usually accomplished by putting an +appropriate record ito each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "lf9.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + lf9.ali + } + +In case you are still using VTeX/Free 7.x (as opposed to +v8.x), copy the .ali file from texmf/fonts/map/vtex to the +directory texmf/vtex/config. + + + +Using the Linotype Frutiger Next fonts with LaTeX +------------------------------------------------- +See the file frutigernext.txt, which resides in the directory +texmf/doc/fonts/linotype. + + + +Legal notice +------------ +The bundle "Linotype Frutiger Next for LaTeX "is made up from +the files lf9.txt and lf9.zip. + + Copyright (c) 2004 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/lmd.txt b/fonts/psfonts/w-a-schmidt/lmd.txt new file mode 100644 index 0000000000..6a2ca4c0ba --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/lmd.txt @@ -0,0 +1,150 @@ +============================================================ + Linotype Meridien font pack for LaTeX +============================================================ + 2003-07-14 + Walter Schmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all required files for using the +Linotype Meridien Type1 fonts with LaTeX on the Un*x or PC +platform. It does _not_ include the actual Type1 fonts, +which are to be purchased from Linotype. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult also its documentation as to installing additional +fonts and macros. The directory name "texmf" refers to the +root directory of a TDS directory tree. In case your TeX +systems has more than one directory tree, its documentation +should tell you where to install new files. + + + +Installing the Type1 font files +------------------------------- +The Type1 font files are to be renamed for use with TeX: + +FontName: Linotype: TeX: +MeridienLT-Roman lte50477.pfb lmdr8a.pfb +MeridienLT-Italic lte50478.pfb lmdri8a.pfb +MeridienLT-Medium lte50479.pfb lmdm8a.pfb +MeridienLT-MediumItalic lte50480.pfb lmdmi8a.pfb +MeridienLT-Bold lte50481.pfb lmdb8a.pfb +MeridienLT-BoldItalic lte50482.pfb lmdbi8a.pfb + +The .pfb files are to be copied to the directory + + texmf/fonts/type1/linotype/meridien + +of your TeX system. The related .afm files should also be +renamed accordingly and installed into the directory + + texmf/fonts/afm/linotype/meridien + +You may need to create these directories first. + + + +Installing the TeX support files from the archive lmd.zip +--------------------------------------------------------- +Unpack the ZIP archive lmd.zip in the directory "texmf" of +your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manually updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the Linotype Meridien fonts. You need to configure +your TeX system so that these files are actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Meridian is +"lmd.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files (here lmd.map) are installed using +the shell script "updmap". With teTeX-2.0 and later (or +teTeX-beta as of June 2002 and later) execute the following +commands: + + texhash + updmap --enable Map lmd.map + +With earlier versions of teTeX, consult its documentation +about how to add new map files to the system. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +lmd.ali. This is usually accomplished by putting an +appropriate record ito each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "lmd.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + lmd.ali + } + +In case you are still using VTeX/Free 7.x (as opposed to +v8.x), copy the .ali file from texmf/fonts/map/vtex to the +directory texmf/vtex/config. + + + +Using the Meridien fonts with LaTeX +----------------------------------- +See the file meridien.txt, which should reside in the directory +texmf/doc/fonts/linotype. + + + +Legal notice +------------ +The Linotype Meridien font pack is made up from the files +lmd.txt and lmd.zip. + + Copyright (c) 2003 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/lml.txt b/fonts/psfonts/w-a-schmidt/lml.txt new file mode 100644 index 0000000000..3d29f27931 --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/lml.txt @@ -0,0 +1,134 @@ +============================================================ + Linotype Melior font pack as of 2004-01-29 +============================================================ + Walter Schmidt + w.a.schmidt(at)gmx.net + +This collection includes tfm, vf, fd and map files to use +Linotypes "Melior" PostScript fonts with LaTeX on the +Un*x or PC platform. It does _not_ include the actual Type1 +fonts, which are to be purchased from Linotype. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, fpTeX, MikTeX or VTeX/Free. The +directory name "texmf" refers to the root directory of the +TDS directory tree. In case your TeX systems has more than +one such directory tree, the documentation should tell you +where to install new files. + + + +Installing the Melior Type1 fonts +--------------------------------- +The Type1 fonts, as supplied by Linotype, are to be renamed +for use with TeX: + +FontName: Linotype: TeX: +MeliorLT lte50062.pfb -> lmlr8a.pfb +MeliorLT-Italic lte50063.pfb -> lmlri8a.pfb +MeliorLT-Bold lte50064.pfb -> lmlb8a.pfb +MeliorLT-BoldItalic lte50065.pfb -> lmlbi8a.pfb + +Copy them to the directory + + texmf/fonts/type1/linotype/melior/ + +of your TeX system. Rename the .afm files accordingly and +put them into texmf/fonts/afm/linotype/melior/. + + + +Installing the support files +---------------------------- +Unpack the ZIP archive lml.zip in the directory "texmf" +of your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Certain TeX systems require manually updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +The present distribution comprises several font map files +for the <Supplier> <Family> fonts. You need to configure +your TeX system so that these files are actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Melior is +"lml.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX: +Use the shell script "updmap" to add the font map file named +"lml.map" to the configuration. See the documentation of +your particular teTeX version how to use the script. With +teTeX 2.0 and above, execute the following commands: + + texhash + updmap --enable Map lml.map + +With earlier versions of teTeX, consult its documentation +about how to add new map files to the system. + +Configuring VTeX/Free: +Make VTeX read the additional font map ("aliasing") file +lml.ali. This is usually accomplished by putting a record +for this file into each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +"lml.ali" is to be added to the TYPE1 section of the +above-mentioned files: + + TYPE1 { + ... + lml.ali + } + +In case you are still using VTeX/Free 7.x (as opposed to +v8.x), copy the .ali file from texmf/fonts/map/vtex to the +directory texmf/vtex/config. + + + +Using the Melior fonts with LaTeX +--------------------------------- +See the file melior.txt, which should now reside in the +directory texmf/doc/fonts/linotype/. + + + +Legal notice +------------ +The Linotype Melior font pack is made up from the files +lml.txt and lml.zip. + + Copyright (c) 2004 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/lmn.txt b/fonts/psfonts/w-a-schmidt/lmn.txt new file mode 100644 index 0000000000..de047ba131 --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/lmn.txt @@ -0,0 +1,231 @@ +=========================================================== + Linotype Minion font pack for LaTeX +============================================================ + 2004-04-13 + WalterSchmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all files required to use Linotype's +Minion PostScript fonts with LaTeX on the Un*x or PC +platform. It does _not_ include the actual Type1 fonts, +which are to be purchased from Linotype. See below for the +list of all fonts used. + +Math typesetting is supported in two flavors: + + First, you may use the free Euler typefaces, wich are + available with any decent TeX system. + + Alternatively, use the commercial MathTime and MathTime + Plus fonts from Y&Y <http://www.yandy.com/mathtime.htm>. + Additional support files to mix Minion with MathTime are + provided in the present collection. + +Notice that the present support files were created from the +version of the Minion fonts, that was provided on version +1.6 of the CD-ROM "Linotype Gold Edition" as of July 2002. +They cannot be used with earlier versions of the fonts. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + +| On VTeX, you should not install both Linotype's and +| Adobe's Minion fonts simultaneously. Rationale: Part of +| the fonts in both collections are identical, and +| installing distinct font files with the same internal +| FontNames is likely to confuse the PostScript interpreter +| (GeX) + + + +Change log +---------- +2004-04-13 + mathlmnt.sty, version 2.1: Math alphabet \mathbold removed; + please, use \bm (from package bm.sty) instead. + +2004-03-14 + Changed location of font map file lmn.ali in the + distribution; it is now distributed both in dvips/config + and in fonts/map/dvips, so as to comply with the future + teTeX. + Package mathlmnt.sty, new version 2.0a; Bug fix regarding + the definitions of the upright Greek characters. + +2003-12-01 + Virtual fonts for italic smallcaps (font shape "scit") + added; they may be useful in conjunction with H.Harders' + macro package slantsc.sty. + Minor bug fix in the kerning table of the regular + smallcaps. + +2003-10-28 + Virtual mathlmnt fonts fixed: With previous versions, + the letters v and w in math mode were taken from Times + rather than Minion. + +2003-10-17 + The package mathlmnt.sty provides a bold-cursive math + alphabet now. The virtual fonts are unchanged. + +2003-08-19 + Fixed kerning of Lsmall-Ysmall in the smallcaps. + VFs and metrics now made using latest fontinst 1.926. + +2003-07-22 + A full upright Greek alphabet is now available with + mathlmnt.sty and the related virtual math fonts. + The text fonts are unchanged + +2003-07-08 + Improved kerning data for german umlauts (once again ;-) + All kerning pairs < 5 units removed. + + + +Installing the Type1 font files +------------------------------- +The Type1 fonts, as supplied by Linotype, are to be renamed +for use with TeX: + +PostScript Linotype TeX +FontName file name file name + +MinionLT-Regular lte50894.pfb lmnr8a.pfb +MinionLT-Italic lte50895.pfb lmnri8a.pfb +MinionLT-Bold lte50897.pfb lmnb8a.pfb +MinionLT-BoldItalic lte50898.pfb lmnbi8a.pfb +MinionLT-DisplayItalic lte50899.pfb lmnrid8a.pfb +MinionLT-DisplayRegular lte50900.pfb lmnrd8a.pfb +MinionLT-Semibold lte50901.pfb lmns8a.pfb +MinionLT-SemiboldItalic lte50902.pfb lmnsi8a.pfb +MinionExp-BoldItalic mjbi____.pfb lmnbi8x.pfb +MinionExp-Bold mjb_____.pfb lmnb8x.pfb +MinionExp-DisplayItalic mjdsi___.pfb lmnrid8x.pfb +MinionExp-DisplayRegular mjds____.pfb lmnrd8x.pfb +MinionExp-Italic mji_____.pfb lmnri8x.pfb +MinionExp-Regular mjrg____.pfb lmnr8x.pfb +MinionExp-SemiboldItalic mjsbi___.pfb lmnsi8x.pfb +MinionExp-Semibold mjsb____.pfb lmns8x.pfb +Minion-Ornaments moor____.pfb lmnrp.pfb + +Copy them to the directory + + texmf/fonts/type1/linotype/minion + +of your TeX system. Rename the .afm files accordingly +and copy them to: + + texmf/fonts/afm/linotype/minion + +Most likely, you will have to create these directories +first. + + + +Installing the TeX support files from the archive lmn.zip +--------------------------------------------------------- +Unpack the ZIP archive lmn.zip in the directory "texmf" +of your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the Linotype Minion fonts. You need to configure +your TeX system so that these files are actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Minion is +"lmn.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files (here lmn.map) are installed using +the shell script "updmap". With teTeX-2.0 and later (or +teTeX-beta as of June 2002 and later) execute the following +commands: + + texhash + updmap --enable Map lmn.map + +With earlier versions of teTeX, consult its documentation +about how to add new map files to the system. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +lmn.ali. This is usually accomplished by putting an +appropriate record ito each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "lmn.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + lmn.ali + } + +In case you are still using VTeX/Free 7.x (as opposed to +v8.x), copy the .ali file from texmf/fonts/map/vtex to the +directory texmf/vtex/config. + + + +Using the Linotype Minion fonts with LaTeX +------------------------------------------ +See the files minion.txt and mathlmnt.pdf, which reside in +the directory texmf/doc/fonts/linotype. + + + +Legal notice +------------ +The bundle "Linotype Minion for LaTeX "is made up from +the files lmn.txt and lmn.zip. + + Copyright (c) 2003 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + +== finis diff --git a/fonts/psfonts/w-a-schmidt/ln9.txt b/fonts/psfonts/w-a-schmidt/ln9.txt new file mode 100644 index 0000000000..bb68004032 --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/ln9.txt @@ -0,0 +1,127 @@ +============================================================ + Linotype Optima Nova font pack as of 2004-01-06 +============================================================ + Walter Schmidt + w.a.schmidt(at)gmx.net + +This collection includes tfm, vf, fd and map files to use +the Linotype OptimaNovaLT-Regular and OptimaNovaLT-Italic +Type1 fonts with LaTeX on the Un*x or PC platform. These +are the two fonts of the Optima Nova collection, that are +available from Linotype's CD-ROM "Gudrun and Hermann Zapf +Collection". + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, fpTeX, MikTeX or VTeX/Free. The +directory name "texmf" refers to the root directory of the +TDS directory tree. In case your TeX systems has more than +one such directory tree, the documentation should tell you +where to install new files. + + + +Installing the Optima Nova Type1 fonts +-------------------------------------- +The Type1 fonts, as supplied by Linotype, are to be renamed +for use with TeX: + +Linotype: TeX: FontName: +lt_55483.pfb -> ln9r8a.pfb OptimaNovaLT-Regular +lt_55486.pfb -> ln9ri8a,pfb OptimaNovaLT-Italic + +Then copy them to the directory + + texmf/fonts/type1/linotype/optiman/ + +of your TeX system. rename the .afm files accordingly and +put them into texmf/fonts/afm/linotype/optiman/. + + + +Installing the support files +---------------------------- +Unpack the ZIP archive ln9.zip in the directory "texmf" +of your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Certain TeX systems require manually updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +The present distribution comprises several font map files +for the <Supplier> <Family> fonts. You need to configure +your TeX system so that these files are actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Optima Nova is +"ln9.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Use the shell script "updmap" to add the font map file named +"ln9.map" to the configuration. See the documentation of +your particular teTeX version how to use the script. With +teTeX 2.0 and above, execute the following commands: + + texhash + updmap --enable Map ln9.map + + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +ln9.ali. This is usually accomplished by putting a record +for this file into each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +"ln9.ali" is to be added to the TYPE1 section of the +above-mentioned files: + + TYPE1 { + ... + ln9.ali + } + + + +Using the Optima Nova fonts with LaTeX +-------------------------------------- +See the file optiman.txt, which should now reside in the +directory texmf/doc/fonts/linotype/. + + + +Legal notice +------------ +The Optima Nova font pack is made up from the files ln9.txt and +ln9.zip. + + Copyright (c) 2004 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/lo9.txt b/fonts/psfonts/w-a-schmidt/lo9.txt new file mode 100644 index 0000000000..f0e7121f8b --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/lo9.txt @@ -0,0 +1,160 @@ +=========================================================== + Linotype ITC Officina Sans font pack for LaTeX +============================================================ + 2003-05-31 + WalterSchmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all files required to use Linotype's +font family "ITC Officina Sans by ITC" in Type1 (PostScript) +format with LaTeX on the Un*x or PC platform. It does _not_ +include the actual font files, which are to be purchased +from Linotype. + +Notice that Linotype offers two different digitizations of +the Officina Sans typeface family: "ITC Officina Sans" and +"ITC Officina Sans by ITC". The present collection supports +only the _latter_ package, which can be regarded as the +"original", and which comprises more fonts, including also +smallcaps. + +The TeX support files cover only the weights "Book" and +"Bold", including the related smallcaps. They refer to the +version of the fonts that was released with version 1.6 of +the Linotype Library and on the Gold Edition CD-ROM 1.6. +They cannot be used with earlier versions. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + + + +Installing the Type1 font files +------------------------------- +The Type1 fonts, as supplied by Linotype, are to be renamed +for use with TeX: + +FontName: Linotype: TeX: +OfficinaSanITC-Bold lt_70808.pfb lo9b8a.pfb +OfficinaSanITC-BoldItal lt_70811.pfb lo9bi8a.pfb +OfficinaSanITC-Book lt_70813.pfb lo9r8a.pfb +OfficinaSanITC-BookItal lt_70816.pfb lo9ri8a.pfb +OfficinaSanITC-BoldSC ofsnbsc_.pfb lo9bc8a.pfb +OfficinaSanITC-BookSC ofsnwsc_.pfb lo9rc8a.pfb + +Copy them to the directory + + texmf/fonts/type1/linotype/officina + +of your TeX system. Rename the .afm files accordingly and +copy them to: + + texmf/fonts/afm/linotype/officina + +Most likely, you will have to create these directories +first. + + + +Installing the TeX support files from the archive lo9.zip +--------------------------------------------------------- +Unpack the ZIP archive lo9.zip in the directory "texmf" +of your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +The present distribution comprises several font map files +for the Linotype ITC-Officina fonts. You need to configure +your TeX system so that these files are actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for ITC Officina is +"lo9.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files (here lo9.map) are installed using +the shell script "updmap". With teTeX-2.0 and later (or +teTeX-beta as of June 2002 and later) execute the following +commands: + + texhash + updmap --enable Map lo9.map + +With earlier versions of teTeX, consult its documentation +about how to add new map files to the system. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +lo9.ali. This is usually accomplished by putting an +appropriate record ito each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "<nfssfam>.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + lo9.ali + } + +In case you are still using VTeX/Free 7.x (as opposed to +v8.x), copy the .ali file from texmf/fonts/map/vtex to the +directory texmf/vtex/config. + + + +Using the Linotype Syntax fonts with LaTeX +---------------------------------------- +See the file officina.txt, which resides in the directory +texmf/doc/fonts/linotype. + + + +Legal notice +------------ +The bundle "Linotype ITC Officina for LaTeX" is made up from +the files lo9.txt and lo9.zip. + + Copyright (c) 2003 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/lsb.txt b/fonts/psfonts/w-a-schmidt/lsb.txt new file mode 100644 index 0000000000..f1229e1caf --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/lsb.txt @@ -0,0 +1,168 @@ +============================================================ + "Linotype Sabon" font pack as of 2003-10-22 +============================================================ + Walter Schmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all required files for using Linotype's +Sabon Type1 fonts with LaTeX on the Un*x or PC platform. It +does _not_ include the actual Type1 fonts, which are to be +purchased. Note that you need a recent version of the +fonts, which includes the Euro symbol! See below for the +list of particular font files needed. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + + + +Bugs and problems +----------------- +The original font metrics as supplied by Linotype are +lacking proper kerning data for accented letters, umlauts +and typical character pairs that occur in other languages +than English. The kerning tables in the TeX metric files +have been somewhat corrected for the German language, but no +further languages are particularly covered so far. + + + +Installing the Type1 font files +------------------------------- +The Type1 font files are to be renamed for use with TeX. +The names of the original files may vary, so the following +table tells the related PostScript font names, too: + +FontName: Linotype: -> TeX: +SabonLT-Roman lte50383.pfb lsbr8a.pfb +SabonLT-Italic lte50384.pfb lsbri8a.pfb +SabonLT-Bold lte50385.pfb lsbb8a.pfb +SabonLT-BoldItalic lte50386.pfb lsbbi8a.pfb +Sabon-BoldItalicOsF sabio___.pfb lsbbij8a.pfb +Sabon-BoldOsF sabof___.pfb lsbbj8a.pfb +Sabon-ItalicOsF saiof___.pfb lsbrij8a.pfb +Sabon-RomanSC sarsc___.pfb lsbrc8a.pfb + + +The .pfb files are to be copied to the directory + + texmf/fonts/type1/linotype/sabon + +of your TeX system. The related .afm files should also be +renamed accordingly and installed into the directory + + texmf/fonts/afm/linotype/sabon + +Most likely, you need to create these directories first. + + + +Installing the TeX support files from the archive lsb.zip +--------------------------------------------------------- +Unpack the ZIP archive lsb.zip in the directory "texmf" of +your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Certain TeX systems require manually updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the Linotype Sabon fonts. You need to configure +your TeX system so that these files are actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Sabon is +"lsb.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + + +Configuring teTeX +----------------- +Additional font map files are installed using the shell +script "updmap". With teTeX-2.0 and later (or teTeX-beta as +of June 2002 and later) execute the commands: + + texhash + updmap --enable Map lsb.map + +With earlier versions of teTeX, consult its documentation +how to use the "updmap" script, or how to install the +additional font map file lsb.map. + + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +lsb.ali. This is usually accomplished by putting a record +for this font map file into each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "lsb.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + lsb.ali + } + +In case you are still using VTeX/Free 7.x (as opposed to +v8.x), copy the .ali file from texmf/fonts/map/vtex to the +directory texmf/vtex/config. + + + +Using the Sabon fonts with LaTeX +-------------------------------- +See the file sabon.txt, which resides in the directory +texmf/doc/fonts/linotype. + + + +Legal notice +------------ +The "Linotype Sabon" font pack is made up from the files +lsb.txt and lsb.zip. + + Copyright (c) 2003 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/lsx.txt b/fonts/psfonts/w-a-schmidt/lsx.txt new file mode 100644 index 0000000000..bbfe6cd859 --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/lsx.txt @@ -0,0 +1,164 @@ +=========================================================== + Linotype Syntax font pack for LaTeX +============================================================ + 2004-08-08 + WalterSchmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all files required to use Linotype's +"Syntax" fonts in Type1 (PostScript) format with LaTeX on +the Un*x or PC platform. It does _not_ include the actual +font files, which are to be purchased from Linotype. + +Notice that the present support files were created from +version 006.000 of the Syntax fonts, as provided in version +1.6 of the Linotype Library and on the Linotype Gold Edition +CD-ROM v1.6. They cannot be used with earlier version of +the fonts. They are NOT suitable for the Linotype Syntax +"Platinum" collection, either! + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + + + +NEWS +---- +2004-08-08 + Fixed a potential bug in the macro package + + + +Installing the Type1 font files +------------------------------- +The Type1 fonts, as supplied by Linotype, are to be renamed +for use with TeX: + +FontName: Linotype: TeX: +SyntaxLT-Roman lte50617.pfb -> lsxr8a.pfb +SyntaxLT-Italic lte50618.pfb -> lsxri8a.pfb +SyntaxLT-Bold lte50619.pfb -> lsxb8a.pfb +SyntaxLT-Black lte50620.pfb -> lsxc8a.pfb +SyntaxLT-UltraBlack lte50621.pfb -> lsxu8a.pfb + +Copy them to the directory + + texmf/fonts/type1/linotype/syntax + +of your TeX system. Rename the .afm files accordingly and +copy them to: + + texmf/fonts/afm/linotype/syntax + +Most likely, you will have to create these directories +first. + + + +Installing the TeX support files from the archive lsx.zip +--------------------------------------------------------- +Unpack the ZIP archive lsx.zip in the directory "texmf" +of your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the Linotype Syntax fonts. You need to configure +your TeX system so that these files are actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX (v2.0 and later) + * VTeX/Free (v8.44 and later) + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Syntax is +"lsx.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files are installed using the shell +script "updmap". With teTeX-2.0 and later (or teTeX-beta as +of June 2002 and later) execute the following commands: + + texhash + updmap --enable Map lsx.map + +With earlier versions of teTeX, consult its documentation +about how to add new map files to the system. + + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +lsx.ali. This is usually accomplished by putting a record +for lsx.ali into each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "lsx.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + lsx.ali + } + +In case you are still using VTeX/Free 7.x (as opposed to +v8.x), copy the .ali file from texmf/fonts/map/vtex to the +directory texmf/vtex/config. + + + +Using the Linotype Syntax fonts with LaTeX +---------------------------------------- +See the file syntax.txt, which resides in the directory +texmf/doc/fonts/linotype. + + + +Legal notice +------------ +The bundle "Linotype Syntax for LaTeX "is made up from +the files lsx.txt and lsx.zip. + + Copyright (c) 2003 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/lzc.txt b/fonts/psfonts/w-a-schmidt/lzc.txt new file mode 100644 index 0000000000..3e04a9a51b --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/lzc.txt @@ -0,0 +1,142 @@ +============================================================ + Linotype Zapf Chancery font pack as of 2004-01-16 +============================================================ + Walter Schmidt + w.a.schmidt(at)gmx.net + +This collection includes tfm, vf, fd and map files to use +Linotypes "Zapf Chancery" PostScript fonts with LaTeX on the +Un*x or PC platform. It does _not_ include the actual Type1 +fonts, which are to be purchased from Linotype. + +NB: In contrast to the support for the single font "Adobe +ZapfChancery Medium Italic" in the PSNFSS bundle, this +collection supports the complete Linotype ZapfChancery font +family. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, fpTeX, MikTeX or VTeX/Free. The +directory name "texmf" refers to the root directory of the +TDS directory tree. In case your TeX systems has more than +one such directory tree, the documentation should tell you +where to install new files. + + + +Installing the Zapf Chancery Type1 fonts +---------------------------------------- +The Type1 fonts, as supplied by Linotype, are to be renamed +for use with TeX: + +Linotype: TeX: FontName: +lte50009.pfb lzcmi8a ZapfChanceryLT-MediumItalic +lte50682.pfb lzcr8a ZapfChanceryLT-Roman +lte50821.pfb lzcl8a ZapfChanceryLT-Light +lte50822.pfb lzcli8a ZapfChanceryLT-LightItalic +lte50823.pfb lzcri8a ZapfChanceryLT-Italic +lte50824.pfb lzcd8a ZapfChanceryLT-Demi +lte50825.pfb lzcb8a ZapfChanceryLT-Bold + +Copy them to the directory + + texmf/fonts/type1/linotype/zapfchan/ + +of your TeX system. Rename the .afm files accordingly and +put them into texmf/fonts/afm/linotype/zapfchan/. + + + +Installing the support files +---------------------------- +Unpack the ZIP archive lzc.zip in the directory "texmf" +of your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Certain TeX systems require manually updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the Linotype Zapf Chancery fonts. You need to configure +your TeX system so that these files are actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX (v2.0 and later) + * VTeX/Free (v8.44 and later) + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Chancery is +"lzc.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Use the shell script "updmap" to add the font map file named +"lzc.map" to the configuration. See the documentation of +your particular teTeX version how to use the script. With +teTeX 2.0 and above, execute the following commands: + + texhash + updmap --enable Map lzc.map + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +lzc.ali. This is usually accomplished by putting a record +for this file into each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +"lzc.ali" is to be added to the TYPE1 section of the +above-mentioned files: + + TYPE1 { + ... + lzc.ali + } + + + +Using the Zapf Chancery fonts with LaTeX +---------------------------------------- +See the file zapfchan.txt, which should now reside in the +directory texmf/doc/fonts/linotype/. + + + +Legal notice +------------ +The Zapf Chancery font pack is made up from the files +lzc.txt and lzc.zip. + + Copyright (c) 2004 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/lze.txt b/fonts/psfonts/w-a-schmidt/lze.txt new file mode 100644 index 0000000000..d7f8860d2b --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/lze.txt @@ -0,0 +1,152 @@ +============================================================ + "Linotype Zapf Essentials" font pack for LaTeX +============================================================ + 2004-10-12 + WalterSchmidt + w-a-schmidt(at)gmx.net + + +This bundle includes all files required to use Linotype's +"Zapf Essentials" fonts in Type1 format with LaTeX on the +Un*x or PC platform. It does _not_ include the actual Type1 +fonts, which need to be purchased. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + + + +Installing the Type1 font files +------------------------------- +Most likely, you have obtaimned the fonts with file names +such as lt_15139.pfb, lt_15140.pfb etc. To use them with +TeX, remane them so that the file names reflect the actual +PostScript /FontName's in lower case: + +original file name: file name in the TeX system: +lt_15139.pfb zapfessentialslt-arrowsone.pfb +lt_15140.pfb zapfessentialslt-arrowstwo.pfb +lt_15141.pfb zapfessentialslt-communication.pfb +lt_15142.pfb zapfessentialslt-markers.pfb +lt_15143.pfb zapfessentialslt-office.pfb +lt_15144.pfb zapfessentialslt-ornaments.pfb +lt_15139.pfb zapfessentialslt-arrowsone.pfb +lt_15140.pfb zapfessentialslt-arrowstwo.pfb +lt_15141.pfb zapfessentialslt-communication.pfb +lt_15142.pfb zapfessentialslt-markers.pfb +lt_15143.pfb zapfessentialslt-office.pfb +lt_15144.pfb zapfessentialslt-ornaments.pfb + +Move the files to the directory + + texmf/fonts/type1/linotype/zapfessentials + +of your TeX system. Rename the related .afm files +accordingly and move them to + + texmf/fonts/afm/linotype/zapfessentials + +Most likely, you will have to create these directories +first. + + + +Installing the TeX support files from the archive lze.zip +-------------------------------------------------------- +Unpack the ZIP archive lze.zip in the directory "texmf" of +your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +The present distribution includes several font map files for +the "Zapf Essentials" fonts. You need to configure your TeX +system so that an appropriate file is actually used. The +required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX + * VTeX/Free (v8.x and later) + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for "Zapf Essentials" is +"zapfessentials.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files (here zapfessentials.map) are +installed using the shell script "updmap". With teTeX-2.0 +and later (or teTeX-beta as of June 2002 and later) execute +the following commands: + + texhash + updmap --enable Map zapfessentials.map + +With earlier versions of teTeX, consult its documentation +about how to add new map files to the system. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +zapfessentials.ali. This is usually accomplished by putting +an appropriate record ito each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "zapfessentials.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + zapfessentials.ali + } + + + + +Using the "Zapf Essentials" fonts with LaTeX +-------------------------------------------- +See the filesa zapfessentials.txt, which should have been +installed in the directory texmf/doc/fonts/linotype of your +TeX system now. + + + +Legal notice +------------ +The bundle "Linotype Zapf Essentials for LaTeX" is made up +from the files lze.txt and lze.zip. + + Copyright (c) 2004 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/mnt.txt b/fonts/psfonts/w-a-schmidt/mnt.txt new file mode 100644 index 0000000000..811878643f --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/mnt.txt @@ -0,0 +1,203 @@ +============================================================ + Monotype TimesNR font pack +============================================================ + 2005-06-01 + Walter Schmidt + w-a-schmidt(at)gmx.net + +This collection comprises tfm, vf, fd and font mapping files +to use the Monotype TimesNR family of Type1 fonts with TeX +on the Un*x or PC platform. It does, however, _not_ include +the actual Type1 fonts, which are to be purchased from +Agfa-Monotype. In order to support separate design sizes +and real small capitals, the following Type1 fonts are +required: + + TimesNRMT + TimesNRExpertMT + TimesNRMT-Italic + TimesNRMT-Bold + TimesNRMT-BoldItalic + TimesNRSevenMT + TimesNRSevenMT-Italic + TimesNRSevenMT-Bold + TimesNRSevenMT-BoldItalic + TimesSmallTextMT + TimesSmallTextMT-Italic + TimesSmallTextMT-Bold + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, fpTeX, MikTeX or VTeX/Free. The +directory name "texmf" refers to the root directory of the +TDS directory tree. In case your TeX systems has more than +one such directory tree, the documentation should tell you +where to install new files. + + + +History +------- +2005-06-01 + virtual fonts remade using latest fontinst, + with minor corrections to the kerning data; + +2004-09-17 + virtual fonts remade using latest fontinst; + improved fd files; + TFMs for OT1 encoded fonts are assigned "traditional" + (non-KB) names; + Type1 font files are to be renamed to follow KB scheme + +2004-01-11 + preliminary release + + + +Updating from the preliminary 2004-01-11 release +------------------------------------------------ +As compared with the preliminary release, a number of file +names as well as the font mapping tables have been changed. +Please, remove that release _entirely_ before installing the +current one, and remove the obsolete font mapping data from +the configuration. + + + +Installing the TimesNR Type1 fonts +---------------------------------- +You need not repeat this step, when updating from the +2004-09-17 release! + +The Type1 (.pfb) font files, as supplied by Monotype, are to +be renamed for use with TeX: + +Font name: File name (Monotype): File name (TeX) +TimesNRSevenMT-BoldItalic svbi____.pfb mntbi8a7.pfb +TimesNRSevenMT-Bold svb_____.pfb mntb8a7.pfb +TimesNRSevenMT-Italic svi_____.pfb mntri8a7.pfb +TimesNRSevenMT sv______.pfb mntr8a7.pfb +TimesNRMT-BoldItalic timbi___.pfb mntbi8a.pfb +TimesNRMT-Bold timb____.pfb mntb8a.pfb +TimesNRMT-Italic timi____.pfb mntri8a.pfb +TimesNRMT tim_____.pfb mntr8a.pfb +TimesSmallTextMT-Bold tstb____.pfb mntb8a5.pfb +TimesSmallTextMT-Italic tsti____.pfb mntri8a5.pfb +TimesSmallTextMT tst_____.pfb mntr8a5.pfb +TimesNRExpertMT tiy_____.pfb mntr8x.pfb + +Copy them to the directory + + texmf/fonts/type1/monotype/timesnew/ + +of your TeX system + +The related .afm files should go into the directory + + texmf/fonts/afm/monotype/timesnew/ + +with file names changed correspondingly. + + + +Installing the support files +---------------------------- +Unpack the ZIP archive mnt.zip in the directory "texmf" +of your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Certain TeX systems require manually updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +You need not repeat this step, when updating from the +2004-09-17 release! + +The present distribution includes several font map files for +the Monotype TimesNR fonts. You need to configure your TeX +system so that an appropriate files are actually used. The +required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for TimesNR is +"mnt.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + + +Configuring teTeX +----------------- +Use the shell script "updmap" to add the font map file named +"mnt.map" to the configuration. See the documentation of +your particular teTeX version how to use the script. With +teTeX 2.0 and above, execute the following commands: + + texhash + updmap --enable Map mnt.map + + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +mnt.ali. This is usually accomplished by putting a record +for this file into each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +"mnt.ali" is to be added to the TYPE1 section of the +above-mentioned files: + + TYPE1 { + ... + mnt.ali + } + + + +Using the TimesNR fonts with TeX +-------------------------------- +See the file timesnew.txt, which should now reside in the +directory texmf/doc/fonts/monotype/. + + + +Known problems +-------------- +The kerning tables of the TimesNR fonts exhibit several +deficiences, affecting accented characters and letter pairs +that are common in languages other than English. +These flaws were not corrected in the TeX font metrics fo far. + + + +Legal notice +------------ +The "Monotype TimesNR font pack" is made up from the files +mnt.txt and mnt.zip. + + Copyright (c) 2004, 2005 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + +== finis diff --git a/fonts/psfonts/w-a-schmidt/pad.txt b/fonts/psfonts/w-a-schmidt/pad.txt new file mode 100644 index 0000000000..13932583a9 --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/pad.txt @@ -0,0 +1,238 @@ +=========================================================== + "Adobe Garamond" font pack for LaTeX +============================================================ + 2004-08-08 + WalterSchmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all files required to use the "Adobe +Garamond" Type1 fonts with LaTeX on the Un*x or PC platform. +It does _not_ include the actual Type1 fonts, which are to +be purchased from Adobe (packages # 143 and 144) or Linotype. +Note that you need a recent version of the fonts, which +includes the Euro symbol! In particular, the following fonts +are supported for use with TeX: + +Adobe Garamond Bold Italic Expert +Adobe Garamond Bold Expert +Adobe Garamond Italic Expert +Adobe Garamond Regular Expert +Adobe Garamond-Semibold +Adobe Garamond Semibold Italic Expert +Adobe Garamond Semibold Expert +Adobe Garamond Regular +Adobe Garamond Italic +Adobe Garamond Semibold Italic +Adobe Garamond Bold +Adobe Garamond Bold Italic + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + + + +What's new? +----------- + +2004-08-08 + Fixed a potential bug in the macro package + +2003-06-01 + Works with both Adobe's and Linotype's fonts + +2003-05-29 + Kerning data thoroughly revised. + Corrected excessive height of certain accented letters. + Changed location of the VTeX font mapping file pad.ali. + +2002-11-30 + The Euro symbol is supported. + Improved kerning. + +2002-09-01 + Improved kernkng. + Obsolete OT1 encoding is no longer supported. + Changed directory layout + +2001-05-21 + New package xagaramon.sty repleces agaramox.sty and + agaramoj.sty. + + + +Installing the Type1 font files from Adobe +------------------------------------------ +Skip this section, if you have got the font files from +Linotype! + +The Type1 fonts, as supplied by Adobe, are to be renamed for +use with TeX: + +FontName: Adobe file name: TeX file name: +AGaramond-Bold gdb_____.pfb padb8a.pfb +AGaramond-BoldItalic gdbi____.pfb padbi8a.pfb +AGaramond-Italic gdi_____.pfb padri8a.pfb +AGaramond-Regular gdrg____.pfb padr8a.pfb +AGaramond-Semibold gdsb____.pfb pads8a.pfb +AGaramond-SemiboldItalic gdsbi___.pfb padsi8a.pfb +AGaramondExp-Bold geb_____.pfb padb8x.pfb +AGaramondExp-BoldItalic gebi____.pfb padbi8x.pfb +AGaramondExp-Italic gei_____.pfb padri8x.pfb +AGaramondExp-Regular gerg____.pfb padr8x.pfb +AGaramondExp-Semibold gesb____.pfb pads8x.pfb +AGaramondExp-SemiboldItalic gesbi___.pfb padsi8x.pfb + +Copy them to the directory + + texmf/fonts/type1/adobe/agaramon + +of your TeX system. Rename the .afm files accordingly and +copy them to: + + texmf/fonts/afm/adobe/agaramon + +Most likely, you will have to create these directories +first. + + +Installing the Type1 font files from Linotype +--------------------------------------------- +Skip this section, if you have got the font files from +Adobe! + +The Type1 fonts, as supplied by Linotype, are to be renamed +for use with TeX: + +FontName: Linotype file name: TeX file name: +AGaramondLT-Bold lte50570.pfb ladb8a.pfb +AGaramondLT-BoldItalic lte50571.pfb ladbi8a.pfb +AGaramondLT-Italic lte50567.pfb ladri8a.pfb +AGaramondLT-Regular lte50566.pfb ladr8a.pfb +AGaramondLT-Semibold lte50568.pfb lads8a.pfb +AGaramondLT-SemiboldItalic lte50569.pfb ladsi8a.pfb +AGaramondExp-Bold geb_____.pfb ladb8x.pfb +AGaramondExp-BoldItalic gebi____.pfb ladbi8x.pfb +AGaramondExp-Italic gei_____.pfb ladri8x.pfb +AGaramondExp-Regular gerg____.pfb ladr8x.pfb +AGaramondExp-Semibold gesb____.pfb lads8x.pfb +AGaramondExp-SemiboldItalic gesbi___.pfb ladsi8x.pfb + +Copy them to the directory + + texmf/fonts/type1/linotype/agaramon + +of your TeX system. Rename the .afm files accordingly and +copy them to: + + texmf/fonts/afm/linotype/agaramon + +Most likely, you will have to create these directories +first. + + + +Installing the TeX support files from the archive pad.zip +--------------------------------------------------------- +Unpack the ZIP archive pad.zip in the directory "texmf" of +your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +The following steps vary, according to your TeX system. +There are different sets of instructions provided for + + * teTeX (2.0 and later) + * VTeX/Free (8.44 and later) + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for AGaramond is +"pad.map" (if you have got the fonts from Adobe) or +"pad-LT.map", you you have installed the Linotype fonts. +Two copies of each file reside in the directories +texmf/dvips/config and texmf/fonts/map /dvips. + +Configuring teTeX +----------------- +Additional font map files (here: pad-map or pad-LT.map) are +installed using the shell script "updmap". With teTeX-2.0 +and later (or teTeX-beta as of June 2002 and later) execute +the following commands: + + texhash + updmap --enable Map pad.map + +if you have got the fonts from Adobe, or + + texhash + updmap --enable Map pad-LT.map + +for the fonts from Linotype. + +With earlier versions of teTeX, consult its documentation +how to use the "updmap" script. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +pad.ali (for the Adobe fonts) or pad-LT.ali (Linotype). +This is usually accomplished by putting a record for the +particular .ali file into each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "pad.ali" or "pad-LT.ali" is to be added to the +TYPE1 section of the above-mentioned files, e.g.: + +TYPE1 { + ... + pad.ali + } + + + + +Using the Adobe Garamond fonts with LaTeX +----------------------------------------- +See the file agaramon.txt, which resides in the directory +texmf/doc/fonts/adobe. + + + +Legal notice +------------ +The bundle "Adobe Garamond for LaTeX "is made up from +the files pad.txt and pad.zip. + + Copyright (c) 2001--2003 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/pas.txt b/fonts/psfonts/w-a-schmidt/pas.txt new file mode 100644 index 0000000000..655c3f93c5 --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/pas.txt @@ -0,0 +1,171 @@ +============================================================ + Adobe Aldus font pack for LaTeX +============================================================ + 2003-07-14 + WalterSchmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all files required to use Adobe's Aldus +PostScript fonts with LaTeX on the Un*x or PC platform. It +does _not_ include the actual Type1 fonts, which are to be +purchased from Adobe. See below for the list of all fonts +used. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + + +What's new? +----------- +2003-07-14 + VFs re-made using fontinst 1.916; + kerning data thoroughly revised; + changed location of the VTeX font mapping file pmn.ali; + English documentation. + +2003-01-07 + kerning pair g-j added + +2002-09-01 + Improved kerning; + lagre inter-word space; + OT1 encoding is no longer supported. + + + +Installing the Type1 font files +------------------------------- +The Type1 fonts, as supplied by Adobe, are to be renamed for +use with TeX: + +FontName: Adobe: TeX: +Aldus-Italic AFI_____.PFB -> pasri8a.pfb +Aldus-ItalicOsF AFIOF___.PFB -> pasrij8a.pfb +Aldus-Roman AFR_____.PFB -> pasr8a.pfb +Aldus-RomanSC AFRSC___.PFB -> pasrc8a.pfb + +Copy them to the directory + + texmf/fonts/type1/adobe/aldus + +of your TeX system. Rename the .afm files accordingly +and copy them to: + + texmf/fonts/afm/adobe/aldus + +Most likely, you will have to create these directories +first. + + + +Removing obsolete files +----------------------- +If you have installed any previous release of this +collection, delete the file texmf/vtex/config/pas.ali. + + + +Installing the TeX support files from the archive pas.zip +--------------------------------------------------------- +Unpack the ZIP archive pas.zip in the directory "texmf" +of your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the Adobe Aldus fonts. You need to configure your TeX +system so that these files are actually used. The required +steps depend on the particular TeX system. Particular sets +of instructions are provided below for the following +systems: + + * teTeX (v2.0 and later) + * VTeX/Free (v8.44 and later) + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Aldus is "pas.map". +Two copies of this file reside in the directories +texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files (here pas.map) are installed using +the shell script "updmap". With teTeX-2.0 and later (or +teTeX-beta as of June 2002 and later) execute the following +commands: + + texhash + updmap --enable Map pas.map + +With earlier versions of teTeX, consult its documentation +how to install an additional map file. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +pas.ali. This is usually accomplished by putting an +appropriate record ito each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "pas.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + pas.ali + } + + + + +Using the Adobe Aldus fonts with LaTeX +-------------------------------------- +See the file aldus.txt, which resides in the directory +texmf/doc/fonts/adobe. + + + +Legal notice +------------ +The bundle "Adobe Aldus for LaTeX "is made up from the files +pas.txt and pas.zip. + + Copyright (c) 2002--2003 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/peg.txt b/fonts/psfonts/w-a-schmidt/peg.txt new file mode 100644 index 0000000000..9e716d1ba4 --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/peg.txt @@ -0,0 +1,166 @@ +============================================================ + Adobe Stempel Garamond font pack for LaTeX +============================================================ + 2003-06-24 + WalterSchmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all files required to use Adobe's +Stempel Garamond PostScript fonts with LaTeX on the Un*x or +PC platform. It does _not_ include the actual Type1 fonts, +which are to be purchased from Adobe. See below for the +list of all fonts used. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + +| On VTeX, you should not install both Linotype's and +| Adobe's Stempel Garamond fonts simultaneously. +| Rationale: Part of the fonts in both collections are +| identical, and installing distinct font files with the +| same internal FontNames is likely to confuse the +| PostScript interpreter (GeX) + + + +What's new? +----------- +2003-06-26 + kerning data thoroughly revised; + updated installation instructions; + OT1 encoding is no longer supported + + + +Installing the Type1 font files +------------------------------- +The Type1 fonts, as supplied by Adobe, are to be renamed for +use with TeX: + +PostScript-FontName: Adobe: TeX: +StempelGaramond-Roman gsr_____.pfb pegr8a.pfb +StempelGaramond-RomanSC gsrsc___.pfb pegrc8a.pfb +StempelGaramond-Italic gsi_____.pfb pegri8a.pfb +StempelGaramond-ItalicOsF gsiof___.pfb pegrij8a.pfb +StempelGaramond-Bold gsb_____.pfb pegb8a.pfb +StempelGaramond-BoldOsF gsbof___.pfb pegbj8a.pfb +StempelGaramond-BoldItalic gsbi____.pfb pegbi8a.pfb +StempelGaramond-BoldItalicOsF gsbio___.pfb pegbij8a.pfb + +Copy them to the directory + + texmf/fonts/type1/adobe/stgaramo + +of your TeX system. Rename the .afm files accordingly +and copy them to: + + texmf/fonts/afm/adobe/stgaramo + +Most likely, you will have to create these directories +first. + + + +Installing the TeX support files from the archive peg.zip +--------------------------------------------------------- +Unpack the ZIP archive peg.zip in the directory "texmf" +of your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the Adobe Stempel Garamond fonts. You need to configure +your TeX system so that these files are actually used. The +required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX (2.0 and later) + * VTeX/Free (8.44 and later) + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Stempel Garamiond is +"peg.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files (here peg.map) are installed using +the shell script "updmap". With teTeX-2.0 and later (or +teTeX-beta as of June 2002 and later) execute the following +commands: + + texhash + updmap --enable Map peg.map + +With earlier versions of teTeX, consult its documentation +how to install an additional map file. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +peg.ali. This is usually accomplished by putting an +appropriate record ito each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "peg.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + peg.ali + } + + + +Using the Adobe Stempel Garamond fonts with LaTeX +----------------------------------------------------- +See the file stgaramo.txt, which resides in the directory +texmf/doc/fonts/adobe. + + + +Legal notice +------------ +The bundle "Adobe Stempel Garamond for LaTeX "is made up +from the files peg.txt and peg.zip. + + Copyright (c) 2002--2003 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/pfr.txt b/fonts/psfonts/w-a-schmidt/pfr.txt new file mode 100644 index 0000000000..351e97775f --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/pfr.txt @@ -0,0 +1,201 @@ +=========================================================== + Adobe Frutiger font pack for LaTeX +============================================================ + 2004-08-08 + WalterSchmidt + w.a.schmidt(@)gmx.net + + +This bundle includes all files required to use the Adobe +Frutiger Type1 fonts with LaTeX on the Un*x or PC platform. +It does _not_ include the actual Type1 fonts, which are to +be purchased from Adobe. + +The following fonts are supported: +Frutiger 45 Light +Frutiger 46 Light Italic +Frutiger 47 Light Condensed +Frutiger 55 Roman +Frutiger 56 Italic +Frutiger 57 Condensed +Frutiger 65 Bold +Frutiger 66 Bold Italic +Frutiger 67 Bold Condensed +Frutiger 75 Black +Frutiger 76 Black Italic +Frutiger 77 Black Condensed +Frutiger 87 Extra Black Condensed +Frutiger 95 Ultra Black + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + + + +NEWS +---- +2004-08-08 + optional scaling + + + +Updating from a previous release +-------------------------------- +In case you install this collection over any previous release, +the directory + + texmf/tex/latex/adobe/frutiger/ + +and the files + + texmf/doc/latex/adobe/frutiger.txt + texmf/vtex/config/pfr.ali + +are to be deleted manually. + + + +Installing the Type1 font files +------------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The Type1 fonts, as supplied by Adobe, are to be renamed for +use with TeX: + +Adobe file name TeX file name +ftb_____.pfb -> pfrb8a.pfb +ftbi____.pfb -> pfrbi8a.pfb +ftbl____.pfb -> pfrc8a.pfb +ftbli___.pfb -> pfrci8a.pfb +fti_____.pfb -> pfrri8a.pfb +ftl_____.pfb -> pfrl8a.pfb +ftli____.pfb -> pfrli8a.pfb +ftr_____.pfb -> pfrr8a.pfb +ftubl___.pfb -> pfru8a.pfb +ftbc____.pfb -> pfrb8ac.pfb +ftblc___.pfb -> pfrc8ac.pfb +ftc_____.pfb -> pfrr8ac.pfb +ftebc___.pfb -> pfru8ac.pfb +ftlc____.pfb -> pfrl8ac.pfb + + +Copy them to the directory + + texmf/fonts/type1/adobe/frutiger + +of your TeX system. Rename the .afm files accordingly +and copy them to: + + texmf/fonts/afm/adobe/frutiger + +Most likely, you will have to create these directories +first. + + + +Installing the TeX support files from the archive pfr.zip +--------------------------------------------------------- +Unpack the ZIP archive pfr.zip in the directory "texmf" +of your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the Adobe Frutiger fonts. You need to configure +your TeX system so that these files are actually used. The +required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Frutiger is +"pfr.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map /dvips. + +Configuring teTeX +----------------- +Additional font map files (here pfr.map) are installed using +the shell script "updmap". With teTeX-2.0 and later (or +teTeX-beta as of June 2002 and later) execute the following +commands: + + texhash + updmap --enable Map pfr.map + +With earlier versions of teTeX, consult its documentation +how to install an additional map file. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +pfr.ali. This is usually accomplished by putting an +appropriate record ito each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "pfr.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + pfr.ali + } + + + + +Using the Adobe Frutiger fonts with LaTeX +----------------------------------------- +See the file frutiger.txt, which resides in the directory +texmf/doc/fonts/adobe. + + + +Legal notice +------------ +The bundle "Adobe Frutiger for LaTeX "is made up from the +files pfr.txt and pfr.zip. + + Copyright (c) 2001--2004 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/pfu.txt b/fonts/psfonts/w-a-schmidt/pfu.txt new file mode 100644 index 0000000000..aaa07fc070 --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/pfu.txt @@ -0,0 +1,227 @@ +=========================================================== + "Adobe Futura" font pack for LaTeX +============================================================ + 2004-09-28 + WalterSchmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all files required to use the "Adobe +Futura" Type1 fonts with LaTeX on the Un*x or PC platform. +It does _not_ include the actual Type1 fonts, which are to +be purchased from either Adobe or Linotype. + +The following fonts of the Futura family are supported: + + Futura Light + Futura Light Oblique + Futura Book + Futura Book Oblique + Futura Bold + Futura Bold Oblique + Futura Condensed Bold + Futura Condensed Bold Oblique + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + + + +What's new? +----------- +2004-09-28 + completely new virtual fonts, made using fontinst 1.926; + bold-condensed fonts are supported; + macro package to support optional scaling; + obsolete OT1 encoding is no longer supported; + Euro symbols + + + +Removing obsolete files +----------------------- +If you have installed a pre-2004 release of this collection, +remove it entirely before installing the present one. +In particular, delete the directories + + texmf/tex/latex/pfu + texmf/fonts/tfm/adobe/futura + texmf/fonts/vf/adobe/futura + +and the files + + texmf/doc/fonts/adobe/futura.txt + texmf/dvips/config/pfu.map + texmf/vtex/config/pfu.map + +and remove the font mapping information for the Futura fonts +from the configuration of the TeX applications. + + + +Installing the Type1 font files from Adobe +------------------------------------------ +Skip this section, if you have got the font files from +Linotype! + +The Type1 fonts, as supplied by Adobe, are to be renamed for +use with TeX: + +FontName: Adobe file name: TeX file name: +Futura-Bold fub_____.pfb pfub8a.pfb +Futura-BoldOblique fubo____.pfb pfubo8a.pfb +Futura-Light ful_____.pfb pful8a.pfb +Futura-LightOblique fulo____.pfb pfulo8a.pfb +Futura-Book fuw_____.pfb pfuk8a.pfb +Futura-BookOblique fuwo____.pfb pfuko8a.pfb +Futura-CondensedBold fucb____.pfb pfub8ac.pfb +Futura-CondensedBoldOblique fucbo___.pfb pfubo8ac.pfb +Copy them to the directory + + texmf/fonts/type1/adobe/futura + +of your TeX system. Rename the .afm files accordingly and +copy them to: + + texmf/fonts/afm/adobe/futura + +Most likely, you will have to create these directories +first. + + +Installing the Type1 font files from Linotype +--------------------------------------------- +Skip this section, if you have got the font files from +Adobe! + +The Type1 fonts, as supplied by Linotype, are to be renamed +for use with TeX: + +FontName: Linotype file name: TeX file name: +FuturaLT-Light lte50150.pfb lful8a.pfb +FuturaLT-LightOblique lte50151.pfb lfulo8a.pfb +FuturaLT-Book lte50152.pfb lfuk8a.pfb +FuturaLT-BookOblique lte50153.pfb lfuko8a.pfb +FuturaLT-Bold lte50154.pfb lfub8a.pfb +FuturaLT-BoldOblique lte50155.pfb lfubo8a.pfb +FuturaLT-CondensedBold lte50196.pfb lfub8ac.pfb +FuturaLT-CondensedBoldOblique lte50197.pfb lfubo8ac.pfb + +Copy them to the directory + + texmf/fonts/type1/linotype/futura + +of your TeX system. Rename the .afm files accordingly and +copy them to: + + texmf/fonts/afm/linotype/futura + +Most likely, you will have to create these directories +first. + + + +Installing the TeX support files from the archive pfu.zip +--------------------------------------------------------- +Unpack the ZIP archive pfu.zip in the directory "texmf" of +your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +The following steps vary, according to your TeX system. +There are different sets of instructions provided for + + * teTeX (2.0 and later) + * VTeX/Free (8.44 and later) + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Futura is +"pfu.map" (if you have got the fonts from Adobe) or +"pfu-LT.map", you you have installed the Linotype fonts. +Two copies of each file reside in the directories +texmf/dvips/config and texmf/fonts/map /dvips. + +Configuring teTeX +----------------- +Additional font map files (here: pfu-map or pfu-LT.map) are +installed using the shell script "updmap". With teTeX-2.0 +and later (or teTeX-beta as of June 2002 and later) execute +the following commands: + + texhash + updmap --enable Map pfu.map + +if you have got the fonts from Adobe, or + + texhash + updmap --enable Map pfu-LT.map + +for the fonts from Linotype. + +With earlier versions of teTeX, consult its documentation +how to use the "updmap" script. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +pfu.ali (for the Adobe fonts) or pfu-LT.ali (Linotype). +This is usually accomplished by putting a record for the +particular .ali file into each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "pfu.ali" or "pfu-LT.ali" is to be added to the +TYPE1 section of the above-mentioned files, e.g.: + +TYPE1 { + ... + pfu.ali + } + + + + +Using the Adobe Futura fonts with LaTeX +----------------------------------------- +See the file futura.txt, which resides in the directory +texmf/doc/fonts/adobe. + + + +Legal notice +------------ +The bundle "Adobe Futura for LaTeX "is made up from the +files pfu.txt and pfu.zip. + + Copyright (c) 2001--2004 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/pml.txt b/fonts/psfonts/w-a-schmidt/pml.txt new file mode 100644 index 0000000000..f918ce3d20 --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/pml.txt @@ -0,0 +1,155 @@ +============================================================ + Adobe Melior font pack as of 2004-01-29 +============================================================ + Walter Schmidt + w.a.schmidt(@)gmx.net + +This collection includes tfm, vf, fd and map files to use +Adobes "Melior" PostScript fonts with LaTeX on the +Un*x or PC platform. It does _not_ include the actual Type1 +fonts, which are to be purchased from Adobe. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, fpTeX, MikTeX or VTeX/Free. The +directory name "texmf" refers to the root directory of the +TDS directory tree. In case your TeX systems has more than +one such directory tree, the documentation should tell you +where to install new files. + + + +What's new? +----------- +2004-01-29 + Changed directory structure of the distribution + OT1 encoding is no longer supported. + Improved kerning. + Notice that the font mapping files are unchanged. + + + +Removing obsolete files +----------------------- +In case you have installed a previous release of this +collection, a number of obsolete files need to be removed +manually (apologies for the inconvenience!): + + the file texmf/pdftex/config/pml.map + the file texmf/vtex/config/pml.ali + all files in the directory texmf/fonts/tfm/adobe/melior + all files in the directory texmf/fonts/vf/adobe/melior + + + +Installing the Melior Type1 fonts +--------------------------------- +The Type1 fonts, as supplied by Adobe, are to be renamed +for use with TeX: + +FontName: Adobe: TeX: +Melior me______.pfb -> pmlr8a.pfb +Melior-Italic mei_____.pfb -> pmlri8a.pfb +Melior-Bold meb_____.pfb -> pmlb8a.pfb +Melior-BoldItalic mebi____.pfb -> pmlbi8a.pfb + +Copy them to the directory + + texmf/fonts/type1/adobe/melior/ + +of your TeX system. Rename the .afm files accordingly and +put them into texmf/fonts/afm/adobe/melior/. + + + +Installing the support files +---------------------------- +Unpack the ZIP archive pml.zip in the directory "texmf" +of your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Certain TeX systems require manually updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the <Supplier> <Family> fonts. You need to configure +your TeX system so that these files are actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX (v2.0 and later) + * VTeX/Free (v8.44 and later) + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Melior is "pml.map". +Two copies of this file reside in the directories +texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX: +Use the shell script "updmap" to add the font map file named +"pml.map" to the configuration. See the documentation of +your particular teTeX version how to use the script. With +teTeX 2.0 and above, execute the following commands: + + texhash + updmap --enable Map pml.map + + +Configuring VTeX/Free: +Make VTeX read the additional font map ("aliasing") file +pml.ali. This is usually accomplished by putting a record +for this file into each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +"pml.ali" is to be added to the TYPE1 section of the +above-mentioned files: + + TYPE1 { + ... + pml.ali + } + + + +Using the Melior fonts with LaTeX +--------------------------------- +See the file melior.txt, which should now reside in the +directory texmf/doc/fonts/adobe/. + + + +Legal notice +------------ +The Melior font pack is made up from the files pml.txt and +pml.zip. + + Copyright (c) 2004 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + +== finis diff --git a/fonts/psfonts/w-a-schmidt/pmn.txt b/fonts/psfonts/w-a-schmidt/pmn.txt new file mode 100644 index 0000000000..0b6ad5a73e --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/pmn.txt @@ -0,0 +1,279 @@ +=========================================================== + "Adobe Minion" font pack for LaTeX +============================================================ + 2004-04-13 + WalterSchmidt + w.a.schmidt(@)gmx.net + + +This bundle includes all files required to use the "Adobe +Minion" Type1 fonts with LaTeX on the Un*x or PC platform. +It does _not_ include the actual Type1 fonts, which are to +be purchased from Adobe. (packages # 143 and 144) + + Math typesetting is supported in two flavors: + + First, you may use the free Euler typefaces, wich are + available with any decent TeX system. + +| Alternatively, use the commercial MathTime and MathTime +| Plus fonts from Y&Y <http://www.yandy.com/mathtime.htm>. +| Additional support files to mix Minion with MathTime are +| provided in the present collection. + + After installing of the present collecion, more + information can be found in the files + texmf/do/fonts/adobe/pmn.txt and ./mathpmnt.pdf + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + +| On VTeX, you should not install both Linotype's and +| Adobe's Minion fonts simultaneously. Rationale: Part of +| the fonts in both collections are identical, and +| installing distinct font files with the same internal +| FontNames is likely to confuse the PostScript interpreter +| (GeX) + + + +What's new? +----------- +2004-04-13 + mathpmnt.sty, version 2.1: Math alphabet \mathbold removed; + please, use \bm (from package bm.sty) instead. + +2004-03-14 + Changed location of font map file pmn.ali in the + distribution; it is now distributed both in dvips/config + and in fonts/map/dvips, so as to comply with the future + teTeX. + Package mathpmnt.sty, new version 2.0a; Bug fix regarding + the definitions of the upright Greek characters. + +2003-12-01 + Virtual fonts for italic smallcaps (font shape "scit") + added; they may be useful in conjunction with H.Harders' + macro package slantsc.sty. + Minor bug fix in the kerning table of the regular + smallcaps. + +2003-10-18 + Virtual mathpmnt fonts fixed: With previous versions, + the letters v and w in math mode were taken from Times + rather than Minion. + +2003-10-17 + The package mathpmnt.sty provides a bold-cursive math + alphabet now. The documentation (mathpmnt.pdf) has been + adapted accordingly. (The previous relase came with a + wrong version of this document, anyway.) The virtual + fonts are unchanged. + +2003-08-19 + Fixed kerning of Lsmall-Ysmall in the smallcaps. + +2003-07-22 + A full upright Greek alphabet is now available with + mathpmnt.sty and the related virtual math fonts. + The text fonts provide (faked) Euro symbols. + All VFs and metrics heve been remade using the latest + fontinst version 1.926. + +2003-07-08 + Improved kerning data for german umlauts (once again ;-) + All kerning pairs < 5 units removed. + +2003-06-01 + Missing files added to ZIP archive. + (sorry for the bug :-) + +2003-05-29 + Improved kerning (e-V, Y-g, Y-s) + +2003-05-12 (bug fixing release) + Missing tfm and vf files added. + Improved kerning of the text fonts. + Slightly improved spacing in math mode (mathpmnt.sty). + +2003-05-06: + Math support added (mathpmnt.sty). + Slightly improved kerning data, particularly in the + smallcaps fonts. + Changed location of the VTeX font mapping file pmn.ali. + +2002-06-03: + Improved kerning data for the German language. + OT1 encoding is no longer supported. + ZIP archives reflects TDS structure. + +2001-04-07: + Minion-Ormaments added + + + +Removing absolete files +----------------------- +* In case you have installed the 2001-04-07 release of this +bundle, please delete the file + + texmf/doc/latex/adobe/minion.txt + +and the directories + + texmf/tex/latex/adobe/minion + texmf/fonts/tfm/adobe/minion + texmf/fonts/vf/adobe/minion + +before installing the present release. + +* In case you have installed _any_ previous release and are +using VTeX/Free 8.x, please delete the file + + texmf/vtex/config/pmn.ali. + +now. + + + +Installing the Type1 font files +------------------------------- +The Type1 fonts, as supplied by Adobe, are to be renamed for +use with TeX: + +Adobe file name TeX file name PostScript FontName + +mob_____.pfb pmnb8a.pfb Minion-Bold +mobi____.pfb pmnbi8a.pfb Minion-BoldItalic +mods____.pfb pmnrd8a.pfb Minion-DisplayRegular +modsi___.pfb pmnrid8a.pfb Minion-DisplayItalic +moi_____.pfb pmnri8a.pfb Minion-Italic +morg____.pfb pmnr8a.pfb Minion-Regular +mosb____.pfb pmns8a.pfb Minion-Semibold +mosbi___.pfb pmnsi8a.pfb Minion-SemiboldItalic +mjb_____.pfb pmnb8x.pfb MinionExp-Bold +mjbi____.pfb pmnbi8x.pfb MinionExp-BoldItalic +mjds____.pfb pmnrd8x.pfb MinionExp-DisplayRegular +mjdsi___.pfb pmnrid8x.pfb MinionExp-DisplayItalic +mji_____.pfb pmnri8x.pfb MinionExp-Italic +mjrg____.pfb pmnr8x.pfb MinionExp-Regular +mjsb____.pfb pmns8x.pfb MinionExp-Semibold +mjsbi___.pfb pmnsi8x.pfb MinionExp-SemiboldItalic +moor____.pfb pmnrp.pfb Minion-Ornaments + +Copy them to the directory + + texmf/fonts/type1/adobe/minion + +of your TeX system. Rename the .afm files accordingly +and copy them to: + + texmf/fonts/afm/adobe/minion + +Most likely, you will have to create these directories +first. + + + +Installing the TeX support files from the archive pmn.zip +--------------------------------------------------------- +Unpack the ZIP archive pmn.zip in the directory "texmf" +of your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the Adobe Minio fonts. You need to configure +your TeX system so that these files are actually used. The +required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX (v2.0 and above) + * VTeX/Free (v8.44 and above) + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Minion is "pmn.map". +Two copies of this file reside in the directories +texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files (here pmn.map) are installed using +the shell script "updmap". With teTeX-2.0 and later (or +teTeX-beta as of June 2002 and later) execute the following +commands: + + texhash + updmap --enable Map pmn.map + +With earlier versions of teTeX, consult its documentation +how to install an additional map file. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +pmn.ali. This is usually accomplished by putting an +appropriate record ito each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "pmn.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + pmn.ali + } + + + +Using the Adobe Minion fonts with LaTeX +--------------------------------------- +See the files minion.txt and mathpmnt.pdf, which reside in +the directory texmf/doc/fonts/adobe. + + + +Legal notice +------------ +The bundle "Adobe Minion for LaTeX "is made up from +the files pmn.txt and pmn.zip. + + Copyright (c) 2001--2004 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/pmy.txt b/fonts/psfonts/w-a-schmidt/pmy.txt new file mode 100644 index 0000000000..44e298331e --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/pmy.txt @@ -0,0 +1,157 @@ +============================================================ + Adobe Myriad font pack as of 2004-01-07 +============================================================ + Walter Schmidt + w.a.schmidt(@)gmx.net + +This collection includes tfm, vf, fd and map files to use +the Adobe Myriad, Myriad Headline and Myriad Condensed +families of Type1 fonts with LaTeX on the Un*x or PC +platform. It can be used even if you have only one of these +font families. + +The collection does not inlclude the fonts themselves; they +need to be purchased from Adobe or Linotype. The four +Myriad fonts (Roman, Italic, Bold, BoldItalic) are also +distributed in conjunction with the Adobe Type Manager, + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, fpTeX, MikTeX or VTeX/Free. The +directory name "texmf" refers to the root directory of the +TDS directory tree. In case your TeX systems has more than +one such directory tree, the documentation should tell you +where to install new files. + + + +What's new? +----------- +2004-01-07 + Faked Euro symbols are now available in all fonts. + +2003-11-26 + Myriad-Headline is supported as series "b", while + the series "bx" is assigned to Myriad-Bold. + + + +Installing the Myriad Type1 fonts +--------------------------------- +The Type1 fonts, as supplied by Adobe or Linotype, are to be +renamed for use with TeX: + +Adobe/Linotype TeX FontName +------------------------------------------------- +wmr_____.pfb pmyr8a.pfb Myriad-Roman +wmi_____.pfb pmyri8a.pfb Myriad-Italic +wmb_____.pfb pmyb8a.pfb Myriad-Bold +wmbi____.pfb pmybi8a.pfb Myriad-BoldItalic + +wmhd____.pfb pmyrd8a.pfb Myriad-Headline + +wmc_____.pfb pmyr8ac.pfb Myriad-Condensed +wmci____.pfb pmyri8ac.pfb Myriad-CnItalic +wmcs____.pfb pmys8ac.pfb Myriad-CnSemibold +wmcsi___.pfb pmysi8ac.pfb Myriad-CnSemiboldItalic +wmcb____.pfb pmyb8ac.pfb Myriad-CnBold +wmcbi___.pfb pmybi8ac.pfb Myriad-CnBoldItalic + +Copy them to the directory + + texmf/fonts/type1/adobe/myriad/ + +of your TeX system. Rename the .afm files accordingly and +put them into texmf/fonts/afm/adobe/myriad/ + + + +Installing the support files +---------------------------- +Unpack the ZIP archive pmy.zip in the directory "texmf" +of your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Certain TeX systems require manually updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +The present distribution comprises several font map files +for the Adobe Myriad fonts. You need to configure +your TeX system so that these files are actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Myriad is +"pmy.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Use the shell script "updmap" to add the font map file named +"pmy.map" to the configuration. See the documentation of +your particular teTeX version how to use the script. With +teTeX 2.0 and above, execute the following commands: + + texhash + updmap --enable Map pmy.map + + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +pmy.ali. This is usually accomplished by putting a record +for this file into each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +"pmy.ali" is to be added to the TYPE1 section of the +above-mentioned files: + + TYPE1 { + ... + pmy.ali + } + + + +Using the Myriad fonts with LaTeX +--------------------------------- +See the file myriad.txt directory texmf/doc/fonts/adobe of +your TeX system + + + +Legal notice +------------ +The Myriad font pack is made up from the files pmy.txt and +pmy.zip. + + Copyright (c) 2004 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/poc.txt b/fonts/psfonts/w-a-schmidt/poc.txt new file mode 100644 index 0000000000..13d0418a42 --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/poc.txt @@ -0,0 +1,195 @@ +============================================================ + Berthold (Adobe) ConcordeBE font pack for LaTeX +============================================================ + 2004-08-08 + Walter Schmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all files required to use the Berthold +ConcordeBE Type1 fonts with LaTeX on the Un*x or PC +platform. It does, however, _not_ include the actual Type1 +fonts, which are to be purchased. + +In particular, use of the following fonts is supported: + + ConcordeBE-Regular + ConcordeBE-Italic + ConcordeBE-Medium + ConcordeBE-MediumItalic + ConcordeBE-RegularExp + ConcordeBE-ItalicExp + ConcordeBE-MediumExp + ConcordeBE-MediumItalicExp + +Note that the ConcordeBE fonts belong to the "Adobe Berthold +Exklusiv Collection"; they are to be distinguished from the +ConcordeBQ fonts, which belong to the "Berhold Quality +Collection". + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, fpTeX, MikTeX or VTeX/Free. The +directory name "texmf" refers to the root directory of the +TDS directory tree. In case your TeX systems has more than +one such directory tree, the documentation should tell you +where to install new files. + + + +Change Log +---------- +2004-08-08 + Fixed a potential bug in the macro package + +2004-01-18 + Improved kerning data. + Faked Euro symbol. + Location of font map file poc.ali changed to + texmf/fonts/map/vtex/poc.ali. + xconcorde.sty: default scaling ratio changed to 92% + + + +Removing obsolete files +----------------------- +In case you are going to install this collection over a +previous release, please make sure that the directory + + texmf/tex/latex/adobe/concorde/ + +and the files + + texmf/doc/latex/adobe/concorde.txt + texmf/vtex/config/poc.ali + +are deleted before. + + + +Installing the Type1 font files +------------------------------- +The Type1 font files, as supplied by Berthold, are to be +renamed for use with TeX: + + PostScript-FontName: Berthold: TeX: + ConcordeBE-Regular qqrg____.pfb -> pocr8a.pfb + ConcordeBE-Italic qqi_____.pfb -> pocri8a.pfb + ConcordeBE-Medium qqm_____.pfb -> pocm8a.pfb + ConcordeBE-MediumItalic qqmi____.pfb -> pocmi8a.pfb + ConcordeBE-RegularExp qqrgx___.pfb -> pocr8x.pfb + ConcordeBE-ItalicExp qqixp___.pfb -> pocri8x.pfb + ConcordeBE-MediumExp qqmxp___.pfb -> pocm8x.pfb + ConcordeBE-MediumItalicExp qqmix___.pfb -> pocmi8x.pfb + +The .pfb files are to be copied to the directory + + texmf/fonts/type1/adobe/concorde + +of your TeX system. The related .afm files are to be +renamed accordingly; install them into the directory + + texmf/fonts/afm/adobe/concorde . + +You may need to create these directories first. + + + +Installing the TeX support files from the archive poc.zip +--------------------------------------------------------- +Unpack the ZIP archive poc.zip in the directory "texmf" of +your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Certain TeX systems require manually updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the Berthold ConcordeBE fonts. You need to configure +your TeX system so that these files are actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for ConcordeBE is +"poc.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files are installed using the shell +script "updmap". With teTeX-2.0 and later (or teTeX-beta as +of June 2002 and later) execute the following commands: + + texhash + updmap --enable Map poc.map + +With earlier versions of teTeX, consult its documentation +how to use the "updmap" script. In case your version of +teTeX has no such script at all, please consult the teTeX +docmentation how to install the additional map file poc.map. + + +Configuring VTeX/Free (v8.00 and later) +--------------------------------------- +Make VTeX read the additional font map ("aliasing") file +poc.ali. This is usually accomplished by putting a record +for poc.ali into each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "poc.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + poc.ali + } + + + +Using the ConcordeBE fonts with LaTeX +------------------------------------- +See the file concorde.txt, which resides in the directory +texmf/doc/fonts/adobe. + + + +Legal notice +------------ +The ConcordeBE font pack is made up from the files poc.txt +and poc.zip. + + Copyright (c) 2001--2004 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/pop.txt b/fonts/psfonts/w-a-schmidt/pop.txt new file mode 100644 index 0000000000..2ba1850a87 --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/pop.txt @@ -0,0 +1,199 @@ +============================================================ + Adobe Optima font pack for LaTeX +============================================================ + 2004-08-08 + Walter Schmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all required files for using the +following Adobe Optima Type1 fonts with LaTeX: + + Optima + Optima-Medium + Optima-Bold + +This bundle does _not_ include the Type1 fonts; they are to +be purchased from Adobe. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. The +directory name "texmf" refers to the root directory of the +TDS directory tree. In case your TeX systems has more than +one such directory tree, the documentation should tell you +where to install new files. + + + +Bugs and problems +----------------- +The font metrics supplied by Adobe are lacking proper +kerning data for accented letters, umlauts and typical +character pairs that occur in other languages than English. + + + +Change Log +---------- +2004-08-08 + Fixed a potential bug in the macro package + +2004-07-26 + New macro package optima.sty, which supports + scaling and use of the "popm" family as options + +2002-12-04 + LaTeX font family popm added. Directory layout changed. + +2001-05-25 + Metrics for Optima-Black added. True italics are no + longer used, because they may not always be available. + + + +Removing absolete files +----------------------- +In case you have installed any previous version of this +bundle, please delete the following file manually, before +installing the current one: + + texmf/vtex/config/pop.ali + +In case you have installed a previous version (< Dec. 2002) +of this bundle, please delete the directories + + texmf/tex/latex/adobe/optima + texmf/fonts/tfm/adobe/optima + texmf/fonts/vf/adobe/optima + +incl. all their contents, and the files + + texmf/doc/latex/adobe/optima.txt + texmf/pdftex/config/pop.cfg + +before installing the present release. + + + +Installing the Type1 font files +------------------------------- +The Type1 font files are to be named properly for use with +TeX. The names of the original files may vary, so the +following table tells the related PostScript font names, +too: + + PostScript FontName Adobe TeX + ------------------------------------------------- + Optima op______.pfb popr8a.pfb + Optima-Medium opm_____.pfb popm8a.pfb + Optima-Bold opb_____.pfb popb8a.pfb + +The .pfb files are to be copied to the directory + + texmf/fonts/type1/adobe/pop + +of your TeX system. (You may need to create this directory +first.) The related .afm files should also be renamed +accordingly and installed into the directory + + texmf/fonts/afm/adobe/pop + + + +Installing the TeX support files from the archive pop.zip +--------------------------------------------------------- +Unpack the ZIP archive pop.zip in the directory "texmf" of +your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the Adobe Optima fonts. You need to configure your TeX +system so that these files are actually used. The required +steps depend on the particular TeX system. Particular sets +of instructions are provided below for the following +systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Optima is +"pop.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files (here pop.map) are installed using +the shell script "updmap". With teTeX-2.0 and later (or +teTeX-beta as of June 2002 and later) execute the following +commands: + + texhash + updmap --enable Map pop.map + +With earlier versions of teTeX, consult its documentation +how to install an additional map file. + +Configuring VTeX/Free (8.44 or later) +------------------------------------- +Make VTeX read the additional font map ("aliasing") file +pop.ali. This is usually accomplished by putting an +appropriate record ito each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "pop.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + pop.ali + } + + + +Updating the filename database +------------------------------ +Certain TeX systems require updating a "filename database" +manually after adding new files. Consult the documentation +of your TeX system! + + + +Using the Optima fonts with LaTeX +------------------------------------------ +See the file optima.txt, which should have been copied to +the directory texmf/doc/fonts/adobe. + + + +Legal notice +------------ +The bundle "Adobe Optima for LaTeX "is made up from +the files pop.txt and pop.zip. + + Copyright (c) 2001--2004 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/pro.txt b/fonts/psfonts/w-a-schmidt/pro.txt new file mode 100644 index 0000000000..391689eafc --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/pro.txt @@ -0,0 +1,215 @@ +=========================================================== + Adobe Rotis font pack for LaTeX +============================================================ + 2005-04-11 + WalterSchmidt + w-a-schmidt(at)gmx.net + + +This bundle includes all files required to use the Adobe +Rotis Type1 fonts with LaTeX on the Un*x or PC platform. It +does _not_ include the actual Type1 fonts, which are to be +purchased from Adobe: + + Rotis Serif 55 + Rotis Serif Italic 56 + Rotis Serif Bold 65 + + Rotis Sans Serif Light 45 + Rotis Sans Serif Light Italic 46 + Rotis Sans Serif 55 + Rotis Sans Serif Italic 56 + Rotis Sans Serif Bold 65 + Rotis Sans Serif Extra Bold 75 + + Rotis SemiSerif 55 + Rotis SemiSerif Bold 65 + + Rotis SemiSans Light 45 + Rotis SemiSans Light Italic 46 + Rotis SemiSans 55 + Rotis SemiSans Italic 56 + Rotis SemiSans Bold 65 + Rotis SemiSans Extra Bold 75 + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + + + +Installing the Type1 font files +------------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The Type1 fonts, as supplied by Adobe, are to be renamed for +use with TeX: + +Adobe file name TeX file name PostScript FontName +------------------------------------------------------- +rg______.pfb -> pror8a.pfb RotisSerif +rgb_____.pfb -> prob8a.pfb RotisSerif-Bold +rgi_____.pfb -> prori8a.pfb RotisSerif-Italic + +rb______.pfb -> pr4r8a.pfb RotisSansSerif +rbb_____.pfb -> pr4b8a.pfb RotisSansSerif-Bold +rbeb____.pfb -> pr4x8a.pfb RotisSansSerif-ExtraBold +rbi_____.pfb -> pr4ri8a.pfb RotisSansSerif-Italic +rbl_____.pfb -> pr4l8a.pfb RotisSansSerif-Light +rbli____.pfb -> pr4li8a.pfb RotisSansSerif-LightItalic + +rf______.pfb -> pr1r8a.pfb RotisSemiSerif +rfb_____.pfb -> pr1b8a.pfb RotisSemiSerif-Bold + +rc______.pfb -> pr3r8a.pfb RotisSemiSans +rcb_____.pfb -> pr3b8a.pfb RotisSemiSans-Bold +rceb____.pfb -> pr3x8a.pfb RotisSemiSans-ExtraBold +rci_____.pfb -> pr3ri8a.pfb RotisSemiSans-Italic +rcl_____.pfb -> pr3l8a.pfb RotisSemiSans-Light +rcli____ pfb -> pr3li8a.pfb RotisSemiSans-LightItalic + + +Copy them to the directory + + texmf/fonts/type1/adobe/rotis + +of your TeX system. Rename the .afm files accordingly +and copy them to: + + texmf/fonts/afm/adobe/rotis + +Most likely, you will have to create these directories +first. + + + +Removing obsolete files +----------------------- +In case you have installed the 2000-03-17 release of this +collection, please delete the files + + dvips/config/pro.map + pdftex/config/pro.map + doc/latex/adobe/rotis.txt + +and the following directory, incloding its contents: + + tex/latex/adobe/rotis/ + +Rationale: With respect to the changed TDS structure, the +location of certain files has changed, and just installing +new dstribution would not overwite or delete the obsolete +files. + + + +Installing the TeX support files from the archive pro.zip +--------------------------------------------------------- +Unpack the ZIP archive pro.zip in the directory "texmf" +of your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution includes several font map files for +the Adobe Rotis fonts. You need to configure your +TeX system so that an appropriate file is actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX v2.0 and later versions + (or teTeX-beta as of June 2002 and later) + * VTeX/Free + +With other TeX systems such as MikTeX or older versions of +teTeX, consult the related documentation how to install an +additional font map file. The name of the map file to be +used for Rotis is "pro.map". Two identical copies +of this file reside in the directories texmf/dvips/config +and texmf/fonts/map/dvips/pro. + + +Configuring teTeX +----------------- +Additional font map files (here pro.map) are installed +using the shell script "updmap". Before doing so, delete +the file texmf/dvips/config/pro.map, which is not +needed in a recent teTeX. Then issue the following +commands in a comamnd shell: + + texhash + updmap --enable Map pro.map + + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +pro.ali. This is usually accomplished by putting an +appropriate record into each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +Edit these files; in each file add the name "pro.ali" +to the TYPE1 section: + + TYPE1 { + ... + pro.ali + } + +In case you are still using VTeX/Free 7.x (as opposed to +v8.x), copy the .ali file from texmf/fonts/map/vtex to the +directory texmf/vtex/config. + + + +Using the Adobe Rotis fonts with LaTeX +---------------------------------------------- +See the file rotis.txt, which resides in the directory +texmf/doc/fonts/adobe. + + + +Legal notice +------------ +The bundle "Adobe Rotis for LaTeX "is made up from +the files pro.txt and pro.zip. + + Copyright (c) 2000--2005 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/psb.txt b/fonts/psfonts/w-a-schmidt/psb.txt new file mode 100644 index 0000000000..e4dcfaacea --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/psb.txt @@ -0,0 +1,182 @@ +============================================================ + "Adobe Sabon" font pack as of 2003-10-22 +============================================================ + Walter Schmidt + w.a.schmidt(@)gmx.net + + +This bundle includes all required files for using Adobe's +Sabon Type1 fonts with LaTeX on the Un*x or PC platform. It +does _not_ include the actual Type1 fonts, which are to be +purchased. Note that you need a recent version of the +fonts, which includes the Euro symbol! See below for the +list of particular font files needed. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + + + +News +---- +2003-10-22 + All virtual fonts re-made using latest fontinst, + thus fixing various deficiencies; + slightly improved kerning tables. + + + +Bugs and problems +----------------- +The original font metrics as supplied by Adobe are lacking +proper kerning data for accented letters, umlauts and +typical character pairs that occur in other languages than +English. The kerning tables in the TeX metric files have +been somewhat corrected for the German language, but no +further languages are particularly covered so far. + + + +Removing obsolete files +----------------------- +In case you have installed a previous release of this +collection, please remove manually the file +texmf/vtex/config/psb.ali before installing the present +release. + + + +Installing the Type1 font files +------------------------------- +The Type1 font files are to be renamed for use with TeX. +The names of the original files may vary, so the following +table tells the related PostScript font names, too: + +FontName: Adobe: TeX: +Sabon-Roman sar_____.pfb psbr8a.pfb +Sabon-Italic sai_____.pfb psbri8a.pfb +Sabon-Bold sab_____.pfb psbb8a.pfb +Sabon-BoldItalic sabi____.pfb psbbi8a.pfb +Sabon-RomanSC sarsc___.pfb psbrc8a.pfb +Sabon-ItalicOsF saiof___.pfb psbrij8a.pfb +Sabon-BoldOsF sabof___.pfb psbbj8a.pfb +Sabon-BoldItalicOsF sabio___.pfb psbbij8a.pfb + +The .pfb files are to be copied to the directory + + texmf/fonts/type1/adobe/sabon + +of your TeX system. The related .afm files should also be +renamed accordingly and installed into the directory + + texmf/fonts/afm/adobe/sabon + +Most likely, you need to create these directories first. + + + +Installing the TeX support files from the archive psb.zip +--------------------------------------------------------- +Unpack the ZIP archive psb.zip in the directory "texmf" of +your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Certain TeX systems require manually updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the Adobe Sabon fonts. You need to configure +your TeX system so that these files are actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Sabon is +"psb.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files (here psb.map) are installed using +the shell script "updmap". With teTeX-2.0 and later (or +teTeX-beta as of June 2002 and later) execute the following +commands: + + texhash + updmap --enable Map psb.map + +With earlier versions of teTeX, consult its documentation +how to install an additional map file. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +psb.ali. This is usually accomplished by putting an +appropriate record ito each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "psb.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + psb.ali + } + +In case you are still using VTeX/Free 7.x (as opposed to +v8.x), copy the file psb.ali from texmf/fonts/map/vtex to +the directory texmf/vtex/config. + + + +Using the Sabon fonts with LaTeX +-------------------------------- +See the file sabon.txt, which resides in the directory +texmf/doc/fonts/adobe. + + + +Legal notice +------------ +The bundle "Adobe Sabon for LaTeX "is made up from the files +psb.txt and psb.zip. + + Copyright (c) 2003 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + +== finis diff --git a/fonts/psfonts/w-a-schmidt/psx.txt b/fonts/psfonts/w-a-schmidt/psx.txt new file mode 100644 index 0000000000..53f920dd9f --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/psx.txt @@ -0,0 +1,179 @@ +=========================================================== + "Adobe Syntax" font pack for LaTeX +============================================================ + 2004-08-08 + WalterSchmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all files required to use Adobe's +"Syntax" fonts in Type1 (PostScript) format with LaTeX on +the Un*x or PC platform. It does _not_ include the actual +font files, which are to be purchased from Adobe (package +#134). + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + + + +What's new? +----------- +2004-08-08 + Fixed a potential bug in the macro package + +2003-10-28 + name of the macro package changed from "syntax.sty" + to "asyntax.sty", thus avoiding a clash with the mdwtools + collection; + +2003-05-29 + minor enhancements to the kerning data + +2003-05-07 + improved kerning; + obsolete OT1 character set is no longer supported + + +Removing obsolete files +----------------------- +In case you have installed the 2003-05-07 release of this +bundle and are using VTeX/Free 8.x, please delete the file + + texmf/vtex/config/psx.ali. + +now. + + + +Installing the Type1 font files +------------------------------- +The Type1 fonts, as supplied by Adobe, are to be renamed +for use with TeX: + +FontName: Adobe: TeX: +Syntax-Bold SXB_____.PFB -> psxb8a.pfb +Syntax-Black SXBL____.PFB -> psxc8a.pfb +Syntax-Italic SXI_____.PFB -> psxri8a.pfb +Syntax-Roman SXR_____.PFB -> psxr8a.pfb +Syntax-UltraBlack SXUBL___.PFB -> psxu8a.pfb + +Copy them to the directory + + texmf/fonts/type1/adobe/syntax + +of your TeX system. Rename the .afm files accordingly and +copy them to: + + texmf/fonts/afm/adobe/syntax + +Most likely, you will have to create these directories +first. + + + +Installing the TeX support files from the archive psx.zip +--------------------------------------------------------- +Unpack the ZIP archive psx.zip in the directory "texmf" +of your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution comprises several font map files +for the Adobe Syntax fonts. You need to configure +your TeX system so that these files are actually used. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Syntax is +"psx.map". Two copies of this file reside in the +directories texmf/dvips/config and texmf/fonts/map/dvips. + +Configuring teTeX +----------------- +Additional font map files (here psx.map) are installed using +the shell script "updmap". With teTeX-2.0 and later (or +teTeX-beta as of June 2002 and later) execute the following +commands: + + texhash + updmap --enable Map psx.map + +With earlier versions of teTeX, consult its documentation +how to install an additional map file. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +psx.ali. This is usually accomplished by putting an +appropriate record ito each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "psx.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + psx.ali + } + +In case you are still using VTeX/Free 7.x (as opposed to +v8.x), copy the file psx.ali from texmf/fonts/map/vtex to +the directory texmf/vtex/config. + + + +Using the Adobe Syntax fonts with LaTeX +---------------------------------------- +See the file syntax.txt, which resides in the directory +texmf/doc/fonts/adobe. + + + +Legal notice +------------ +The bundle Adobe Syntax for LaTeX "is made up from +the files psx.txt and psx.zip. + + Copyright (c) 2003 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + +== finis diff --git a/fonts/psfonts/w-a-schmidt/qeb.txt b/fonts/psfonts/w-a-schmidt/qeb.txt new file mode 100644 index 0000000000..0d09bef0e9 --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/qeb.txt @@ -0,0 +1,144 @@ +=========================================================== + Berthold BaskervilleBQ font pack for LaTeX +============================================================ + 2003-05-08 + WalterSchmidt + w.a.schmidt(at)gmx.net + + +This bundle includes all files required to use the "Berthold +BaskervilleBQ + Expert" Type1 fonts with LaTeX on the Un*x +or PC platform. It does _not_ include the actual Type1 +fonts, which are to be purchased from the Berthold Library. + +The below installation instructions assume a TDS-compliant +TeX system, such as teTeX, MikTeX or VTeX/Free. Yet they +may not exactly fit your particular TeX system; please, +consult its documentation, too! The directory name "texmf" +refers to the root directory of a TDS directory tree. In +case your TeX systems has more than one directory tree, its +documentation should tell you where to install new files. + + + +Installing the Type1 font files +------------------------------- +The Type1 fonts, as supplied by Berthold, are to be renamed +for use with TeX: + +Berthold TeX PostScript FontName +file name file name + +90043501.PFB -> qebr8a.pfb BaskervilleBerthBQ-Regular +90043502.PFB -> qebri8a.pfb BaskervilleBerthBQ-Italic +90043503.PFB -> qebm8a.pfb BaskervilleBerthBQ-Medium +90043504.PFB -> qebmi8a.pfb BaskervilleBerthBQ-MediumItalic +90044501.PFB -> qebrc8a.pfb BaskervilleBerthBQ-RegSC +90044503.PFB -> qebrij8a.pfb BaskervilleBerthBQ-ItalicOsF +90044504.PFB -> qebmj8a.pfb BaskervilleBerthBQ-MedOsF +90044505.PFB -> qebmij8a.pfb BaskervilleBerthBQ-MedItalicOsF + +Copy them to the directory + + texmf/fonts/type1/berthold/baskerbe + +of your TeX system. Rename the .afm files accordingly and +copy them to: + + texmf/fonts/afm/berthold/baskerbe + +Most likely, you will have to create these directories +first. + + + +Installing the TeX support files from the archive qeb.zip +--------------------------------------------------------- +Unpack the ZIP archive qeb.zip in the directory "texmf" +of your TeX system; thus, all files will be copied to the +appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +The following steps vary, according to your TeX system. +There are different sets of instructions provided for + + * teTeX + * VTeX/Free + +With other TeX systems such as MikTeX, consult the related +documentation how to install an additional font map file. +The name of the map file to be used for Optima is +"pop.map". + +Configuring teTeX +----------------- +Additional font map files are installed using the shell +script "updmap". With teTeX-2.0 and later (or teTeX-beta as +of June 2002 and later) execute the following commands: + + texhash + updmap --enable Map qeb.map + +With earlier versions of teTeX, consult its documentation +how to install a new map file. + +Configuring VTeX/Free +--------------------- +Make VTeX read the additional font map ("aliasing") file +qeb.ali. This is usually accomplished by putting a record +for qeb.ali into each of the configuration files + + texmf/vtex/config/pdf.fm +and + texmf/vtex/config/ps.fm + +The name "qeb.ali" is to be added to the TYPE1 section of +the above-mentioned files: + +TYPE1 { + ... + qeb.ali + } + +In case you are still using VTeX/Free 7.x (as opposed to +v8.x), copy the file qeb.ali from texmf/fonts/map/vtex to +the directory texmf/vtex/config. + + + +Using the BaskervilleBQ fonts with LaTeX +---------------------------------------- +See the file baskerbe.txt, which resides in the directory +texmf/doc/fonts/berthold. + + + +Legal notice +------------ +The bundle "Berthold BaskervilleBQ for LaTeX "is made up +from the files qeb.txt and qeb.zip. + + Copyright (c) 2003 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/qtype.txt b/fonts/psfonts/w-a-schmidt/qtype.txt new file mode 100644 index 0000000000..fe7572b5b0 --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/qtype.txt @@ -0,0 +1,177 @@ +=========================================================== + "FF QType Extended Book" font pack for LaTeX +============================================================ + 2005-08-01 + WalterSchmidt + w-a-schmidt(at)gmx.net + + +This bundle includes all files required to use the Type1 +font "FF QType Extended Book" with LaTeX on a Unix, Windows, +or OS/2 platform. It does _not_ include the actual Type1 +font, which can be downloaded for free from FontFonts's web +site. (Because of legal restrctions, it cannot be +distributed via CTAN.) + +The layout of the distribution and the related installation +instructions suit recent, TDS-compliant TeX systems such as +teTeX, MikTeX or VTeX/Free. + + + +Installation paths +------------------ +The files of your TeX system are arranged in one or more +tree structures, the so-called "texmf trees". The names and +paths of the particular root directories of these trees vary +between different TeX systems. In the following +instructions the install paths are indicated in a form such +as, for instance: + + <texmf>/fonts/type1/... + +<texmf> stands for the the actual name of the root directory +of the texmf tree, where you want to install the files: + +teTeX and MikTeX require additional files to be installed in +a particular "local" tree (rather than in the one where the +default components of the TeX system reside). Its path must +either be indicated in the documentation of the TeX system +or you should have defined it yourself upon installation. +With MikTeX, for instance, the root directory of the "local" +texmf tree is usually "c:\localtexmf", so you would in fact +have to substitute + + c:\localtexmf\fonts\type1\... + +for the path name in the above example. + +VTeX/Free, in contrast, has only one single texmf tree, +whose root directory is normally "/usr/local/vtex/texmf" (on +Linux) or "c:\texmf" (on OS/2). + +Note that paths are indicated in "Unix notation" (i.e., +using slashes as directory separators), unless they are +specific for Win or OS/2. + + + +Downloading and installing the Type1 font file +---------------------------------------------- +Download a ZIP archive containing the font FF QType +Extended Book" in Type1 format from the FontFont web site: + + <http://www.fontfont.com/downloads/QType-WinPS.zip> + +Unpack QType-WinPS.zip in a temporary directory. The Type1 +font, i.e., the file + + QTEtBo__.pfb + +must be moved to the directory + + <texmf>/fonts/type1/fontfont/qtype + +of your TeX system. Move the related .afm file accordingly +to: + + <texmf>/fonts/afm/fontfont/qtype + +Most likely, you will have to create these directories +first. + + + +Installing the TeX support files from the archive qtype.zip +..--------------------------------------------------------- +Unpack the ZIP archive qtype.zip in the directory <texmf>, +i.e., in root directory of the TeX file tree, where you want +to install the present collection. Thus, all files will end +up in the appropriate directories. + + + +Updating the filename database +------------------------------ +Many TeX systems require manual updating of a "filename +database" after adding of new files. Please, consult the +documentation of your TeX system! + + + +Configuring your TeX system +--------------------------- +| +| You need not repeat this step, when updating from a +| previous release of this collection! +| + +The present distribution includes several font map files for +the <Supplier> <Family> fonts. You need to configure your +TeX system so that an appropriate file will be used in fact. +The required steps depend on the particular TeX system. +Particular sets of instructions are provided below for the +following systems: + + * MikTeX 2.4 and later + * VTeX/Free 8 and later + +With other TeX systems such as teTeX or TeXLive, consult the +related documentation how to install an additional font map +file. The name of the map file to be used for QType is +"qtype.map". Two identical copies of this file reside in +the directories <texmf>/dvips/config and +<texmf>/fonts/map/dvips/qtype. + + +* Configuring MikTeX 2.4+ +Edit the file <texmf>\miktex\config\updmap.cfg. (In case it +does not yet exist, create it as a new file.) Add the line + + Map qtype.map + +and save the file; then execute the following commands +in a command line window ("DOS shell"): + + initexmf -u + updmap + + +* Configuring VTeX/Free 8+ +Make VTeX read the additional font mapping file +qtype.ali. This is usually accomplished by putting an +appropriate record into each of the configuration files + + <texmf>/vtex/config/pdf.fm +and + <texmf>/vtex/config/ps.fm + +Edit these files; in each file add "qtype.ali" +to the TYPE1 section: + + TYPE1 { + ... + qtype.ali + } + + + + +Legal notice +------------ +The "FF QType Extended Book" font pack is made up from the +files dqtype.txt and qtype.zip. + + Copyright (c) 2004 Walter Schmidt + +It may be distributed and/or modified under the conditions +of the LaTeX Project Public License, either version 1.3 of +this license or (at your option) any later version. +The latest version of this license is in +<http://www.latex-project.org/lppl.txt> and version 1.3 or +later is part of all distributions of LaTeX version +2003/12/01 or later. +This bundle has the LPPL maintenance status "maintained". + + +== finis diff --git a/fonts/psfonts/w-a-schmidt/zap.txt b/fonts/psfonts/w-a-schmidt/zap.txt new file mode 100644 index 0000000000..2a8f2bb3f6 --- /dev/null +++ b/fonts/psfonts/w-a-schmidt/zap.txt @@ -0,0 +1,138 @@ +============================================================
+ Linotype Zapfino font pack as of 2004-01-01
+============================================================
+ Walter Schmidt
+ w.a.schmidt(at)gmx.net
+
+This collection includes tfm, vf, fd and map files to use
+the Linotype Zapfino-One and Zapfino-Ornaments Type1 fonts
+with LaTeX on the Un*x or PC platform. It does _not_
+include the actual font files, which are to be purchased
+from Linotype.
+
+|
+| Note that the Zapfino-Two and Zapfino-Three fonts are not
+| (yet) supported.
+|
+
+The below installation instructions assume a TDS-compliant
+TeX system, such as teTeX, fpTeX, MikTeX or VTeX/Free. The
+directory name "texmf" refers to the root directory of the
+TDS directory tree. In case your TeX systems has more than
+one such directory tree, the documentation should tell you
+where to install new files.
+
+
+
+Installing the Zapfino Type1 fonts
+----------------------------------
+The Type1 fonts, as supplied by Linotype, need NOT to be
+renamed for use with TeX (because they don't fit into the KB
+naming scheme, anyway). Just store the following .pfb files
+in the directory texmf/fonts/type1/linotype/zapfino/:
+
+FontName: file name:
+LinotypeZapfino-One lt_54223.pfb
+LinotypeZapfino-Ornaments lzorn___.pfb
+
+On Unix, make sure that the file names are lower case! The
+related .afm files should be installed into the directory
+texmf/fonts/afm/linotype/zapfino/.
+
+
+
+Installing the support files
+----------------------------
+Unpack the ZIP archive zap.zip in the directory "texmf"
+of your TeX system; thus, all files will be copied to the
+appropriate directories.
+
+
+
+Updating the filename database
+------------------------------
+Certain TeX systems require manually updating of a "filename
+database" after adding of new files. Please, consult the
+documentation of your TeX system!
+
+
+
+Configuring your TeX system
+---------------------------
+|
+| You need not repeat this step, when updating from a
+| previous release of this collection!
+|
+
+The present distribution comprises several font map files
+for the Zapfino fonts. You need to configure
+your TeX system so that these files are actually used.
+The required steps depend on the particular TeX system.
+Particular sets of instructions are provided below for the
+following systems:
+
+ * teTeX (v2.0 and above)
+ * VTeX/Free (v8.44 and above)
+
+With other TeX systems such as MikTeX, consult the related
+documentation how to install an additional font map file.
+The name of the map file to be used for Zapfino is
+"zapfino.map". Two copies of this file reside in the
+directories texmf/dvips/config and texmf/fonts/map/dvips.
+
+
+Configuring teTeX
+-----------------
+Use the shell script "updmap" to add the font map file named
+"zapfino.map" to the configuration. See the documentation
+of your particular teTeX version how to use the script.
+With teTeX 2.0 and above, execute the following commands:
+
+ texhash
+ updmap --enable Map zapfino.map
+
+Configuring VTeX/Free
+---------------------
+Make VTeX read the additional font map ("aliasing") file
+zapfino.ali. This is usually accomplished by putting a
+record for this file into each of the configuration files
+
+ texmf/vtex/config/pdf.fm
+and
+ texmf/vtex/config/ps.fm
+
+The name "zapfino.ali" is to be added to the TYPE1 section
+of the above-mentioned files:
+
+TYPE1 {
+ ...
+ zapfino.ali
+ }
+
+
+
+Using the Zapfino fonts with LaTeX
+---------------------------------
+See the file zapfino.txt, which should now reside in the
+directory texmf/doc/fonts/linotype/.
+
+
+
+Legal notice
+------------
+The Zapfino font pack is made up from the files zap.txt and
+zap.zip.
+
+ Copyright (c) 2004 Walter Schmidt
+
+It may be distributed and/or modified under the conditions
+of the LaTeX Project Public License, either version 1.3 of
+this license or (at your option) any later version.
+The latest version of this license is in
+<http://www.latex-project.org/lppl.txt> and version 1.3 or
+later is part of all distributions of LaTeX version
+2003/12/01 or later.
+This bundle has the LPPL maintenance status "maintained".
+
+
+== finis
|