CTAN sync 202401310301

21 files changed, 0 insertions, 3131 deletions

diff --git a/macros/psizzl/aaaread.me b/macros/psizzl/aaaread.me
deleted file mode 100644
index b5e53769fb..0000000000
--- a/macros/psizzl/aaaread.me
+++ /dev/null
@@ -1,10 +0,0 @@
-                   PSIZZL - A TeX Format for Physics Papers
-
-
-      PSIZZL is a TeX format for physics papers written at SLAC and used at
-seveal other places. It uses too many fonts to work with the version of TeX on
-the VAX Cluster, so the sans serif and small caps fonts have been removed, and
-the control sequences for these have been redefined to give Roman type. Both
-the modified source code and a .FMT file are contained in this directory. 
-
-      Please report any problems to F. Paige at X3836.
diff --git a/macros/psizzl/chapters.psizzl b/macros/psizzl/chapters.psizzl
deleted file mode 100644
index 1dc8efdb71..0000000000
--- a/macros/psizzl/chapters.psizzl
+++ /dev/null
@@ -1,314 +0,0 @@
-% CHAPTERS PSIZZL - generate the body of the publication
-%
-% CHAPTER MACRO
-%
-% \chapter{title}
-%                            This command numbers the chapter,
-%                            generates part of the number to be
-%                            used in defining equation numbers,
-%                            centers the line and prints it in
-%                            boldface type.
-%    When the above macro is to be used,
-%    you first set up with the macro
-%
-% \beginbody
-%
-%    Then you define the chapters:
-%
-% \chapter{<chaptertitle>}%
-%
-%    where <chaptertitle> may contain embedded \breaktitle macros
-%
-%    After the \chapter for the last chapter, input the commnad:
-%
-% \beginappendices,
-%
-%    then more \chapter's for the appendices:
-%
-% \chapter{<appendixtitle>}%
-%
-%    Within each chapter, the current chapter name will be \chaptername
-%    (for appendices, this will be a letter).
-%
-%    You may use macros to define sections and subsections within
-%    chapters:
-%
-% \section{<section name>}%
-%
-% \subsection{<subsection name>}%
-%
-%    To output the tables of figures, etc. at the end, give the command:
-%
-% \endbody
-%
-%
-\def\n@llout#1{\immediate\closeout#1\immediate\openout#1}%
-\newcount\partcount
-\def\p@rtinit{\partcount\@ne}%
-\adddef\resd@c{\p@rtinit}%
-\newcount\t@cpagecount\t@cpagecount\m@ne
-\newcount\f@gpagecount\f@gpagecount\m@ne
-\newcount\t@bpagecount\t@bpagecount\m@ne
-\newcount\l@stpagecount\l@stpagecount\m@ne
-\newif\ifpartapp
-\newwrite\p@rtwrite
-\def\p@rtfile{parts.psiztemp }%
-\def\p@rthead{Table of Parts}%
-\n@llout\p@rtwrite\p@rtfile
-\def\part#1{%
-   \ifpartapp%
-      \xdef\p@rtname{Appendix\ \number\partcount}%
-      \else%
-      \xdef\p@rtname{Part\ \romannumeral\partcount}%
-      \fi%
-   \advance\partcount\@ne
-   \begingroup\c@tset%
-   \p@rttable%
-   }%
-\def\p@rtname{}%
-\def\p@rttable#1{%
-   \c@tMeoline\l@tMother
-   \xdef\writeit{%
-      \write\p@rtwrite{%
-         \line{%
-            \strut{\bf\p@rtname}\quad
-            \uppercase{%
-               \h@tMother#1\h@tMother
-               }%
-            \leaderfil\noexpand\number\p@gecount}%
-         }%
-      }%
-   \writeit\endgroup
-   \p@rtheader{#1}%
-   }%
-\def\p@rtheader#1{%
-   \endpage%
-   \llap{}\vfill%
-   {\fortyss
-      \centerline{\p@rtname}%
-      \bigbreak%
-      \centertitle{\uppercase{#1}}%
-      }%
-   \endpage%
-   }%
-\def\partout{%
-   \ifnum\partcount=\z@\else
-      \endpage\p@gefront
-      {\bf\centertitle\p@rthead}%
-      \immediate\closeout\p@rtwrite
-      \input\p@rtfile
-      \fi
-   }%
-\newcount\ch@ptercount
-\newif\if@ppendix% chapter/@ppendix switch
-\newwrite\ch@pterwrite
-\def\ch@pterfile{chapters.psiztemp }%
-\def\ch@pterhead{Table of Contents}%
-\def\ch@ptertext{}%
-\def\@ppendixtext{Appendix }%
-%
-\def\beginbody{%
-   \b@dyreset
-   }%
-\def\b@dyreset{%
-   \def\ch@ptername{}%
-   \ch@pterinit\ch@pterreset
-   \@ppendixfalse
-   \p@geclear
-   }%
-\adddef\resd@c{\ch@pterclear\b@dyreset\fr@nttrue}%
-\def\ch@pterinit{\ch@ptercount\@ne}%
-\def\ch@pterclear{\ch@ptertot\z@\n@llout\ch@pterwrite\ch@pterfile}%
-\def\ch@ptername{}%
-\def\chapter{% title
-   \if@ppendix\xdef\ch@ptername{\char\number\ch@ptercount\relax}%
-      \let\temp\@ppendixtext
-      \else   \xdef\ch@ptername{\number\ch@ptercount\relax}%
-      \let\temp\ch@ptertext
-      \fi\global\advance\ch@ptercount\@ne
-   \ch@ptereject \ch@pterreset
-   \ch@skiph
-   \vbox\bgroup\begingroup\c@tset\ch@ptertable%
-   }%
-\def\ch@ptertable#1{%
-   \@ddch@pt{#1}{\strut{\temp\ch@ptername.}\quad}\endgroup
-   \vskip-\parskip
-   \bf\centertitle{\temp\ch@ptername.\quad#1}\egroup
-   \backpar\ch@skiph
-   }%
-\def\ch@ptercite#1#2{% fig, tab citation style
-   \ifch@pterrenumber#1.#2\else#2\fi
-   }%
-\def\equ@tioncite#1#2{% eqn citation style
-   \ifch@pterrenumber#1-#2\else#2\fi
-   }%
-\def\r@fcite#1#2{% ref citation style
-   \ifr@frenumber#1.#2\else#2\fi
-   }%
-\def\ch@pterreset{\s@ctioninit\s@ctionreset\c@teclear}%
-\def\ch@ptereject{\ifch@pterrenumber\vfill\supereject\fi}%
-\def\beginappendices{\@ppendixtrue\ch@ptercount`A}%
-%
-% build the table of contents,etc iteratively:
-%   1) put out TOC to determine its length => list of tables, figures
-%      get the correct pagenumbers
-%   2) put out list of tables and store its page number
-%   3) put out list of figures and store its page number
-%   4) put out TOC again, now using the correct page numbers for
-%      list of tables  and list of figures
-%
-% (note: after \eject, the page number register contains the previous
-%        page number)
-%
-\newif\iff@gt@bhead
-\def\f@gt@bhead{\f@gt@bheadfalse
-   \ifnum\t@btotal>\z@\f@gt@bheadtrue
-      \line{\strut\t@btabhead\leaderfil\romannumeral-\t@bpagecount}%
-      \fi
-   \ifnum\f@gtotal>\z@\f@gt@bheadtrue
-      \line{\strut\f@gtabhead\leaderfil\romannumeral-\f@gpagecount}%
-      \fi
-   }%
-\newcount\blankcount
-\def\rectoleaf{%
-   \ifquadside
-      \blankcount\pageno
-      \divide\blankcount4\multiply\blankcount4
-      \advance\blankcount-\pageno\blankcount-\blankcount
-      \ifnum\blankcount=\@ne\else\hrule height\z@\endleaf\fi\lock
-      \else\endpage
-      \fi
-   }%
-\newif\ift@c
-\newcount\t@cpages\t@cpages\@ne
-\def\endbody{%
-   \vfill\supereject% is there an alternative?
-   \c@teout\endpage
-   \iffrontmatter
-      \immediate\closeout\ch@pterwrite
-      \ifproof\else\endpage\fi
-      %
-      \l@stpagecount=\number\p@gecount\p@gecount=\number\t@cpagecount
-      \t@bpagecount=\number\t@cpagecount\advance\t@bpagecount\t@cpages
-      \f@gpagecount=\number\t@bpagecount\advance\f@gpagecount\m@ne
-      \t@cfalse
-      {\bf\uppercase{\centertitle{\ch@pterhead}}}\bigbreak
-      \ifnum\ch@ptertot>\z@\unlock\input\ch@pterfile\lock\fi
-      \iff@gt@bhead
-         \ifnum\t@bpagecount=\p@gecount\else\t@ctrue\fi
-         \t@bpagecount=\number\p@gecount\advance\t@bpagecount\m@ne
-         \re@dback\t@btabwrite\t@btabfile\t@btabhead\t@btotal
-         %
-         \ifnum\f@gpagecount=\p@gecount\else\t@ctrue\fi
-         \f@gpagecount=\number\p@gecount\advance\f@gpagecount\m@ne
-         \re@dback\f@gtabwrite\f@gtabfile\f@gtabhead\f@gtotal
-         \endleaf
-         \ift@c
-            \rectoleaf
-            \l@stpagecount=\number\p@gecount\p@gecount=\number\t@cpagecount
-            {\bf\uppercase{\centertitle{\ch@pterhead}}}\bigbreak
-            \ifnum\ch@ptertot>\z@\unlock\input\ch@pterfile\lock\fi
-            %
-            \t@bpagecount=\number\p@gecount\advance\t@bpagecount\m@ne
-            \re@dback\t@btabwrite\t@btabfile\t@btabhead\t@btotal
-            %
-            \f@gpagecount=\number\p@gecount\advance\f@gpagecount\m@ne
-            \re@dback\f@gtabwrite\f@gtabfile\f@gtabhead\f@gtotal
-            \endleaf
-            \fi
-         \fi
-      \endleaf
-      \p@gecount=\number\l@stpagecount
-      \fi
-   }%
-% SECTION MACRO
-%                            The \section macro sets the name in upper
-%                            and lower case capitals, prints the
-% \section{Name}%            section name and number (left adjusted)
-%                            and skips the appropriate amount of space.
-\newcount\s@ctioncount
-\def\s@ctioninit{\global\s@ctioncount\@ne}%
-\def\secskipt{\bigbreak}%
-\def\s@ctionname{}%
-\def\section{\xdef\s@ctionname{\ch@ptername.\number\s@ctioncount}%
-   \global\advance\s@ctioncount\@ne
-   \s@ctionreset
-   \ch@skiph
-   \vbox\bgroup\begingroup\c@tset\s@ctiontable%
-   }%
-\def\s@ctiontable#1{%
-   \@ddch@pt{#1}{\quad\strut{\s@ctionname}\quad}\endgroup
-   \vskip-\parskip
-   \cp\noindent\s@ctionname\quad#1\par\egroup
-   \backpar\ch@skiph\sectionindent
-   }%
-\def\s@ctionreset{\subs@ctioninit\subs@ctionreset}%
-\let\sectionindent\relax
-%
-% SUBSECTION MACRO
-%
-% \subsection{name}%         Subsections appear with a number and
-%                            with the name in slant font.
-%
-\newcount\subs@ctioncount
-\def\subs@ctioninit{\global\subs@ctioncount\@ne}%
-\def\subs@ctionname{}%
-\def\subsection{% subsection macro
-   \xdef\subs@ctionname{\s@ctionname.\number\subs@ctioncount}%
-   \global\advance\subs@ctioncount\@ne
-   \subs@ctionreset
-   \ch@skiph
-   \vbox\bgroup\begingroup\c@tset\subs@ctiontable%
-   }%
-\def\subs@ctiontable#1{%
-   \@ddch@pt{#1}{\qquad\strut{\subs@ctionname}\quad}\endgroup
-   \sl\noindent\subs@ctionname\quad#1\par\egroup
-   \backpar\ch@skiph\subsectionindent
-   }%
-\def\subs@ctionreset{\subsubs@ctioninit\subsubs@ctionreset}%
-\let\subsectionindent\relax
-%
-% SUBSUBSECTION MACRO
-%
-% \subsubsection{name}%         Subsubsections appear with a number and
-%                            with the name in slant font.
-%
-\newcount\subsubs@ctioncount
-\def\subsubs@ctioninit{\global\subsubs@ctioncount\@ne}%
-\def\subsubsection{%
-   \xdef\subsubs@ctionname{\subs@ctionname.\number\subsubs@ctioncount}%
-   \global\advance\subsubs@ctioncount\@ne
-   \subsubs@ctionreset
-   \ch@skiph
-   \vbox\bgroup\begingroup\c@tset\subsubs@ctiontable%
-   }%
-\def\subsubs@ctiontable#1{%
-   \@ddch@pt{#1}{\quad\qquad\strut{\subsubs@ctionname}\quad}\endgroup
-   \sl\noindent\subsubs@ctionname\quad#1\par\egroup
-   \backpar\ch@skiph\subsubsectionindent
-   }%
-\def\subsubs@ctionreset{\p@ntinit\p@ntreset}%
-\let\subsubsectionindent\relax
-%
-% Common to all macros: write into the table of contents file
-%
-\newcount\ch@ptertot\ch@ptertot\z@
-\def\ch@skiph{\par\ifdim\lastskip<\bigskipamount
-  \removelastskip\vskip\bigskipamount\fi}%
-\def\backpar{\nobreak\vskip-\parskip\nobreak\nointerlineskip}%
-\def\t@bcontents{% line for table of contents in table of contents
-   \line{\strut\ch@pterhead\leaderfil\romannumeral-\t@cpagecount}%
-   }%
-\def\@ddch@pt#1#2{\c@tMeoline\l@tMother
-   \xdef\next{%
-      \write\ch@pterwrite{%
-         \line{#2\h@tMother#1\h@tMother%
-            \noexpand\leaderfil\noexpand\numorroman\p@gecount%
-            }%
-         }%
-      }%
-   \next\global\advance\ch@ptertot\@ne
-   \l@tMspace
-   }%
-% for setting the first letter of each word uppercase: make space active
-% cause next token to be \uppercase{\next}
diff --git a/macros/psizzl/citation.psizzl b/macros/psizzl/citation.psizzl
deleted file mode 100644
index 97031c7670..0000000000
--- a/macros/psizzl/citation.psizzl
+++ /dev/null
@@ -1,607 +0,0 @@
-% CITATION PSIZZL  - citation macros
-%
-% The first time you cite the reference, use the `=' syntax:
-% this creates an entry in the table of references.
-% here's how to refer to a reference the first time:
-% "...as was shown first in\reference\DrellYan={%
-%   Drell,~S.~D., Levy,~D.~J., Yan,~T.~M.,
-%   A FIELD THEORETIC MODEL FOR ELECTRON - NUCLEON DEEP INELASTIC
-%   SCATTERING,
-%   Phys.~Rev.~Lett. \refspec{22, 744-8(1969)}.
-%   }%
-% here's how to cite the ref:
-% "...hadrons produced in this way\cite\DrellYan\ obey a distribution..."
-% or:
-% "...as was shown first in \reference\DrellYan .  "
-% or:
-% "...end of sentence. \Reference\DrellYan\ has the somewhat curious.."
-% References cited this way will have automatic style switching.
-%
-% Figures and tables are to be defined in an analogous way
-% The first time a figure is referred to:
-% "... these data are displayed in
-%  \figure\<mnemonic>=
-%  {Title of the figure}{caption}{<the figure itself>} more text..."
-% and on subsequent references:
-% "...the cross section ( see \figure\nanobarn)..."
-% or:
-% "...end of sentence. \Figure\newcross\ shows how the new physics..."
-% Tables are exactly analogous to figures.
-%
-% Equations are defined:
-% \equation\<mnemonic>={<equation expression without $$'s>}%
-% e.g.:
-% \equation\quadrature={x^2+y^2=z^2}%
-% to use this construct:
-% "...end of sentence. \Equation\quadrature\ therefore represents..."
-%
-\def\p@gerightglue{\hss}\def\p@geleftglue{\hss}%
-\def\Ps@zerr#1#2{\errhelp=#2\errmessage{Psizzl: #1}}%
-\newhelp\Ps@zmsngtxt{%
-   I expected you to define this name here, but you didn't.
-   You need to define this name here.
-   Hit <CR> to continue processing.
-   }%
-\newhelp\Ps@zmltptxt{%
-   I already encountered this name, but you're trying to define it here.
-   You need to give the defining text the first time the name is used,
-   not here. Hit <CR> to continue.
-   }%
-\newif\iftitleincaption\titleincaptiontrue
-\newif\ifv@ta
-\def\vita#1{%
-   \v@tatrue\def\v@ta{#1}%
-   }%
-\def\v@tahead{\uppercase{Vita}}%
-% needed: macros to assist in the preparation of the author list on the
-% titlepage
-%
-% Macros common to references and title page addresses
-%
-\def\c@tset{\c@tMactive\c@tVset\l@twrite}%
-\def\xd@fnumber#1#2{\xdef#1{{\number\m@decount}}\m@debump}%
-\def\xd@fletter#1#2{\xdef#1{{\char\number\m@decount}}\m@debump}%
-\def\xd@ftext#1#2{\xdef#1{{\it#2}}}%
-\def\xd@fch@pt#1{%
-   \xdef#1{\ch@ptercite{\ch@ptername}{\number\m@decount}}\m@debump
-   }%
-\def\m@debump{%
-   \global\advance\m@decount\@ne \global\advance\m@detotal\@ne
-   }%
-\def\m@deref#1{%
-   \begingroup
-   \ifx=\next
-      \aftergroup\m@detypr\aftergroup#1%
-      \c@tset
-      \begingroup\aftergroup\g@ttok\aftergroup\m@decap
-      \begingroup\aftergroup\g@ttok\aftergroup\m@deeqs
-      \else
-      \Ps@zerr{missing text for \string#1}\Ps@zmsngtxt
-      \fi
-   \endgroup
-   }%
-\def\m@detypr#1{\c@tMeoline
-   \edef\next{\noexpand#1{\the\m@decap}}\global\m@decap{}%
-   \begingroup\aftergroup\expandafter\aftergroup\m@dedoembed
-      \endgroup\next
-   }%
-%
-% Reference Macros
-%
-\newcount\r@ftotal\r@ftotal\z@
-\newcount\r@fcount\r@fcount\@ne
-\newif\ifr@frenumber\r@frenumberfalse%
-\newif\ifch@pterrenumber\ch@pterrenumberfalse%
-\newwrite\r@fcapwrite\def\r@fcapfile{refcap.psiztemp }%
-\def\r@fcaphead{\uppercase{References}}%
-\newwrite\r@ftabwrite\def\r@ftabfile{reftab.psiztemp }%
-\def\r@ftabhead{\uppercase{List of References}}%
-\def\hyphen{-}\def\comma{,}%
-\newif\ifciter@f
-\newif\ifsuperr@f\superr@ftrue
-\newif\ifc@tenull
-\newif\ifnewr@f
-\def\refspec#1,#2(#3){{\bf#1}, #2 (#3)}%
-\def\volyearpageref{\gdef\refspec##1,##2(##3){{\bf##1} (##3) ##2}}%
-\def\cernref{%vol
-   \gdef\refspec##1,##2(##3){%
-      %author, year, {\it Journal} Publisher {\fb Vol}, page.
-      }%
-   }%
-\def\refstyle{%
-   \r@fstyle
-   }%
-\def\r@fstyle#1{\r@fbeg#1\r@fend}%
-\def\lapperiod{%
-   \hbox to \z@{.\hss}%
-   }%
-\def\r@fsupbeg{$^\bgroup}\def\r@fsupend{\egroup$}%
-\def\r@fsupparbeg{$^\bgroup(}\def\r@fsupparend{)\egroup$}%
-\def\r@fbrabeg{[}\def\r@fbraend{]}%
-\def\r@fparbeg{(}\def\r@fparend{)}%
-\def\superreference{%
-   \let\r@fbeg\r@fsupbeg\let\r@fend\r@fsupend
-   }\superreference
-\def\bracketreference{%
-   \let\r@fbeg\r@fbrabeg\let\r@fend\r@fbraend
-   }%
-\def\parenreference{%
-   \let\r@fbeg\r@fparbeg\let\r@fend\r@fparend
-   }%
-\def\superparenreference{%
-   \let\r@fbeg\r@fsupparbeg\let\r@fend\r@fsupparend
-   }%
-\def\cite{%
-   \let\t@g=\r@fstyle\r@fget
-   }%
-\def\hideref{%
-   \let\t@g\g@ble\r@fget
-   }%
-\def\bareref{%
-   \let\t@g\relax\r@fget
-   }%
-\def\reference{%
-   \let\t@g=\r@f\r@fget
-   }%
-\def\Reference{%
-   \let\t@g=\R@f\r@fget
-   }%
-\def\r@f{Ref.\tie}%
-\def\R@f{Reference\tie}%
-\def\r@fget{%
-   \let\m@dedef=\m@deref\let\m@degobble=\g@bble
-   \let\m@decount=\r@fcount\let\m@detotal=\r@ftotal
-   \let\m@dedoembed\r@fembed
-   \let\p@riod=\p@int
-   \l@tnxt\m@denxt
-   }%
-\def\r@fembed#1#2{\xd@fnumber#1{#2}%
-   \t@g{#1}\c@tMeoline\@dd\r@fcapwrite{#1\p@riod}{{\rm#2}}%
-   }%
-% following 6 lines define macros to be used in mutiple references
-\def\f@rstcite{\let\cite\s@ccite\let\sp@nit\g@ble\bareref}%
-\def\s@ccite{\let\cite\th@rdcite\let\sp@nit\comma\hideref}%
-\def\th@rdcite{\let\cite\hideref\let\sp@nit\dash\hideref}%
-\def\spancite{\begingroup\let\cite\f@rstcite\r@fbeg}%
-\def\groupcite{\begingroup\let\cite\bareref\let\sp@nit\g@ble\r@fbeg}%
-\def\endcite{\sp@nit\mn@m\r@fend\endgroup}%
-\def\comma{,}\def\dash{-}%
-%
-%
-%  author address macros
-%
-%
-% three styles:
-%
-% 1 - inline author addresses
-%
-% 2 - footnoted address
-%
-% 3 - addresses in ref list
-%
-\newcount\@ddrcount
-\newcount\@ddrtotal
-\newif\ifc@teaddress
-\def\rm@a{`a}\def\gr@a{\tw@}%
-\def\@ddsuper#1{$^{(#1)}$}%
-\adddef\resd@c{\@ddrcount\@ddrz@\@ddrtotal\z@}%
-\def\pr@sent{Present address: }%
-\def\authoraddress{%
-   \let\@ddrpre=\relax\@ddrget
-   }%
-\def\presentaddress{%
-   \let\@ddrpre=\pr@sent\@ddrget
-   }%
-\def\addressreference{% author addresses are references
-   \let\@ddraction=\@ddradd
-   \let\@ddrxdef=\xd@fletter
-   \let\@ddrtag=\@ddsuper
-   \let\@ddrt@tal=\r@ftotal
-   \let\@ddrz@\rm@a % alt: \let\@ddrz@\gr@a
-   \c@teaddresstrue
-   }%
-\def\@ddradd#1#2{%
-   \t@g{#1}\c@tMeoline\@dd\r@fcapwrite{(#1)}{{\rm\@ddrpre#2}}%
-   }%
-\def\addressfootnote{% author addresses are footnotes
-   \let\@ddraction=\@ddrfoot
-   \let\@ddrxdef=\xd@fletter
-   \let\@ddrtag=\@ddsuper
-   \let\@ddrt@tal=\@ddrtotal
-   \let\@ddrz@\rm@a
-   \c@teaddresstrue
-   }%
-\def\@ddrfoot#1#2{\footnote{\t@g{#1}}{{\rm\@ddrpre#2}}}%
-\def\addressinline{% author addresses are inline
-   \let\@ddraction=\@ddrinline
-   \let\@ddrxdef=\xd@ftext
-   \let\@ddrtag=\breaktitle
-   \let\@ddrt@tal=\@ddrtotal
-   \let\@ddrz@\z@
-   \c@teaddressfalse
-   }%
-\def\@ddrinline#1#2{{\rm\t@g#2}}%
-\def\@ddrget{%
-   \let\m@dedef=\m@deref\let\m@degobble=\g@bble
-   \let\m@decount=\@ddrcount\let\m@detotal=\@ddrt@tal
-   \let\t@g=\@ddrtag
-   \let\m@dedoembed=\@ddrembed
-   \let\p@riod=\p@int
-   \l@tnxt\m@denxt
-   }%
-\def\@ddrembed#1#2{\@ddrxdef#1{#2}\@ddraction#1{#2}}%
-\addressfootnote
-%
-% EQUATION NUMBER MACRO
-%
-\newcount\eq@count\eq@count\@ne\newcount\eq@total\eq@total\z@
-\newwrite\eq@write
-\def\eq@file{equation.textemp }%
-\def\eq@head{\uppercase{List of Equations}}%
-\def\display{%
-   \let\t@g\g@ble\eq@get
-   }%
-\def\Equation{%
-   \let\t@g\Eq@\eq@get
-   }%
-\def\Eq@{Equation\tie}%
-\def\equation{%
-   \let\t@g\eq@\eq@get
-   }%
-\def\eq@{Eqn.\tie}%
-\def\eq@get{%
-   \let\m@dedef=\m@deref\let\m@degobble=\g@bble
-   \let\m@decount=\eq@count\let\m@detotal=\eq@total
-   \let\m@dedoembed=\@qnembed
-   \let\p@riod=\d@sh
-   \l@tnxt\m@denxt
-   }%
-\def\@qnembed#1#2{\xd@fch@pt#1\t@g{#1}{\l@tMspace$$#2\eqno(#1)$$}}%
-%
-% macros common to \figure and \table commands
-%
-\def\m@denxt#1{\def\mn@m{#1}%
-   \ifx\undefined#1\let\temp\m@dedef\else\let\temp\m@dechk\fi
-   \temp#1%
-   }%
-\def\m@dechk#1{\t@g{#1}%
-   \ifx=\next\let\temp\m@lterr\else\let\temp\g@ble\fi\temp#1%
-   }%
-\def\m@lterr#1{%
-   \Ps@zerr{multiple text for \string#1}\Ps@zmltptxt\m@degobble
-   }%
-\def\g@bbbble#1#2#3#4{}%
-\def\g@bbble#1#2#3{}%
-\def\g@bble#1#2{}%
-\def\g@ble#1{}%
-\def\m@deset#1{%
-   \begingroup
-   \ifx=\next
-      \aftergroup\m@detype\aftergroup#1%
-      \c@tset
-      \begingroup\aftergroup\g@ttok\aftergroup\m@defig
-      \begingroup\aftergroup\g@ttok\aftergroup\m@decap
-      \begingroup\aftergroup\g@ttok\aftergroup\m@detit
-      \begingroup\aftergroup\g@ttok\aftergroup\m@deeqs
-      \else
-      \Ps@zerr{missing text for \string#1}\Ps@zmsngtxt
-      \fi
-   \xd@fch@pt#1% chapter number is embedded in this number.
-   \t@g#1% the rest of this must not generate any unwanted spaces!
-   \endgroup
-   }%
-\newtoks\m@deeqs\newtoks\m@detit\newtoks\m@decap\newtoks\m@defig
-\def\m@detype#1{\c@tMeoline
-   \edef\next{\noexpand#1{\the\m@detit}{\the\m@decap}{\the\m@defig}}%
-   \global\m@detit{}\global\m@decap{}\global\m@defig{}%
-   \begingroup\aftergroup\expandafter
-      \ifm@dembed\aftergroup\m@dedoembed\else\aftergroup\m@denoembed\fi
-      \endgroup\next
-   }%
-%
-% end of macros common to \table and \figure commands
-%
-% FIGURE CAPTION MACRO
-%
-% The Figure Caption macro generates a list of figure captions.  It
-% is similar to the reference macro.
-%
-\newif\iffigureembed\figureembedtrue
-\newif\iff@gmidpage\f@gmidpagetrue
-\newif\iff@gfullpage
-\newcount\f@gcount\f@gcount\@ne
-\newcount\f@gtotal\f@gtotal\z@
-\newwrite\f@gcapwrite\def\f@gcapfile{figcap.psiztemp }%
-\def\f@gcaphead{\uppercase{Figure Captions}}%
-\newwrite\f@gtabwrite\def\f@gtabfile{figtab.psiztemp }%
-\def\f@gtabhead{{List of Figures}}%
-\newwrite\f@gfigwrite\def\f@gfigfile{figfig.psiztemp }%
-\def\f@ginsert{%
-   \iff@gfullpage\let\next=\pageinsert
-      \else\iff@gmidpage\let\next=\ordinsert
-         \else\let\next=\topinsert
-         \fi
-      \fi\next
-   }%
-\def\f@gcaptext#1#2#3{%
-   \noindent\F@g#1. \iftitleincaption#2\fi#3%
-   }%
-\def\f@gcaption#1#2#3{%
-   \iff@gfullpage\vfill\f@gcaptext{#1}{#2}{#3}%
-      \else{\narrower{\f@gcaptext{#1}{#2}{#3}}\par}%
-      \fi
-   }%
-\def\figure{%
-   \def\t@g{\f@g}\f@gget%
-   }%
-\def\Figure{%
-   \def\t@g{\F@g}\f@gget
-   }%
-\def\hidefig{%
-   \let\t@g\g@ble\f@gget
-   }%
-\def\barefig{%
-   \let\t@g\relax\f@gget
-   }%
-\def\f@g{Fig.\tie}%
-\def\F@g{Figure\tie}%
-\def\f@gget{%
-   \let\m@dedef=\m@deset\let\m@degobble\g@bbbble
-   \let\m@decount=\f@gcount\let\m@detotal=\f@gtotal
-   \let\ifm@dembed=\iffigureembed
-   \let\m@dedoembed\f@gpar\let\m@denoembed\f@gnow
-   \let\p@riod=\p@int
-   \l@tnxt\m@denxt
-   }%
-\def\f@gpar#1#2#3#4{\ch@ckpar
-   \adddef\m@dpar{\l@tMspace
-      \f@ginsert
-         \singlespace
-         \ifdraft\else\line{\p@geleftglue\vbox{#4}\p@gerightglue}\fi
-         \f@gcaption#1{#2}{#3}%
-         \@ddtab\f@gtabwrite#1{#2}%
-         \endinsert
-      }%
-   }%
-\def\f@gnow#1#2#3#4{%
-   {\l@twrite
-      \@ddtab\f@gtabwrite#1{#2}%
-      \@dd\f@gcapwrite{#1.}{\iftitleincaption#2\fi#3}%
-      \immediate\write\f@gfigwrite{#4}%
-      \immediate\write\f@gfigwrite{\hang\F@g#1.\endpage}%
-      }%
-   }%
-%
-% TABLE CAPTION MACRO
-%
-% The Table Caption macro generates a list of table captions.
-% It is similar to the figure macro.
-%
-\newif\iftableembed\tableembedtrue
-\newif\ift@bmidpage\t@bmidpagetrue
-\newif\ift@bfullpage
-\newcount\t@bcount\t@bcount\@ne \newcount\t@btotal\t@btotal\z@
-\newwrite\t@bcapwrite\def\t@bcapfile{tabcap.psiztemp }%
-\def\t@bcaphead{\uppercase{Table Captions}}%
-\newwrite\t@btabwrite\def\t@btabfile{tabtab.psiztemp }%
-\def\t@btabhead{{List of Tables}}%
-\newwrite\t@bfigwrite\def\t@bfigfile{tabfig.psiztemp }%
-\def\t@binsert{%
-   \ift@bfullpage\let\next=\pageinsert
-      \else\ift@bmidpage\let\next=\ordinsert
-         \else\let\next=\topinsert
-         \fi
-      \fi\next
-   }%
-\def\t@bcaptext#1#2#3{%
-   \noindent\T@b#1\p@riod\ \iftitleincaption#2\fi#3%
-   }%
-\def\t@bcaption#1#2#3{%
-   \ift@bfullpage\t@bcaptext{#1}{#2}{#3}\par
-      \else\ift@bmidpage\bigskip\fi
-      {\narrower{\t@bcaptext{#1}{#2}{#3}\par}}\medskip
-      \fi
-   }%
-\def\table{%
-   \let\t@g\t@b\t@bget
-   }%
-\def\Table{%
-   \let\t@g\T@b\t@bget
-   }%
-\def\hidetab{%
-   \let\t@g\g@ble\t@bget
-   }%
-\def\baretab{%
-   \let\t@g\relax\t@bget
-   }%
-\def\t@b{Table\tie}\def\T@b{Table\tie}%
-\def\t@bget{%
-   \let\m@dedef=\m@deset\let\m@degobble=\g@bbbble
-   \let\m@decount=\t@bcount\let\m@detotal=\t@btotal
-   \let\ifm@dembed=\iftableembed
-   \let\m@dedoembed\t@bpar\let\m@denoembed\t@bnow
-   \let\p@riod=\p@int
-   \l@tnxt\m@denxt
-   }%
-\def\t@bpar#1#2#3#4{\ch@ckpar
-   \adddef\m@dpar{\l@tMspace
-      \t@binsert
-         \singlespace
-         \t@bcaption#1{#2}{#3}%
-         \ifdraft\else\line{\p@geleftglue\vbox{#4}\p@gerightglue}\fi
-         \@ddtab\t@btabwrite#1{#2}%
-         \endinsert
-      }%
-   }%
-\def\t@bnow#1#2#3#4{%
-   {\l@twrite
-      \@ddtab\t@btabwrite#1{#2}%
-      \@dd\t@bcapwrite{#1.}{\iftitleincaption#2\fi#3}%
-      \immediate\write\t@bfigwrite{#4}%
-      \immediate\write\t@bfigwrite{\hang\T@b#1.\endpage}%
-      }%
-   }%
-%
-% COMMON MACROS FOR ALL THE ABOVE
-%
-% Following three macros implement the ordered midinsert: \ordinsert.
-% This repairs the defect in \midinsert which can cause the order of
-% the inserts in the typeset document to be different from the
-% order in which they appear in the source.
-% Note that a \midinsert is translated into a \topinsert if it is too big
-% or if there are any inserts carried over at all. So a split footnote
-% would have an interference effect here.
-\newif\if@ord
-\def\ordinsert{\@ordtrue\@midtrue\@ins}%
-\def\endinsert{\egroup % finish the \vbox
-  \if@mid\p@gefalse\if@ord\ifnum\insertpenalties>\z@\@midfalse\fi\fi\fi
-  \if@mid
-    \dimen@\ht\z@\advance\dimen@\dp\z@\advance\dimen@\bigskipamount
-    \advance\dimen@\pagetotal\advance\dimen@\pagedepth
-    \advance\dimen@-\pageshrink\advance\dimen@-\pagegoal
-    \ifdim\dimen@>\z@\@midfalse\fi
-    \fi
-  \if@mid \bigskip\box\z@\bigbreak
-    \else\insert\topins{\penalty100 % floating insertion
-      \splittopskip\z@skip
-      \splitmaxdepth\maxdimen \floatingpenalty\z@
-      \ifp@ge \dimen@\dp\z@
-        \vbox to\vsize{\unvbox\z@\kern-\dimen@}% depth is zero
-        \else \box\z@\nobreak\vskip\@ne\bigskipamount
-        \fi
-      }%
-    \fi\endgroup\@ordfalse
-  }%
-% Following five macros examine successive tokens until something other
-% than a <CR> is seen. This, then becomes the tokens put into the
-% token register which is the argument of \g@ttok.
-% In this way, the tokens are absorbed with <CR> as an active character
-% but still preserving TeX's property of spacing past blanks (including
-% a <CR>) as it is absorbing the arguments of a macro.
-\def\g@ttok#1{\let\temp#1\l@kt@k}%
-\def\l@kt@k{\futurelet\next\d@ct@k}%
-\def\d@ct@k{%
-   \if\next\h@tMactive\let\next\g@bt@k\else\let\next\g@tt@k\fi\next
-   }%
-\def\g@tt@k#1{\global\temp{#1}\endgroup}%
-\def\g@bt@k#1{\l@kt@k}%
-\def\ch@ckpar{%
-   \ifx\par\endgraf\gdef\par{\m@dpar}%
-      \gdef\m@dpar{\gdef\m@dpar{}\global\let\par\endgraf\par}%
-      \fi
-   }%
-\def\l@tnxt#1#2{\def\temp{#1#2}\futurelet\next\temp}%
-\def\lowercasecite{%
-   \gdef\r@f{ref.\tie}\gdef\f@g{fig.\tie}%
-   \gdef\t@b{table\tie}\gdef\eq@{eqn.\tie}%
-   }%
-\adddef\l@twrite{% define in macros
-   \l@tMother
-   \let\figure=0\let\Figure=0%
-   \let\table=0\let\Table=0%
-   \let\reference=0\let\Reference=0\let\cite=0%
-   \let\authoraddress=0\let\presentaddress=0%
-   \let\equation=0\let\Equation=0\let\display=0%
-   \let\picture=0%
-   }%
-\gdef\@dd#1#2#3{% add something to the specified file
-   {\l@twrite
-      \immediate\write#1{\noexpand\hangpar{.08}{#2\quad}\percent}%
-      \immediate\write#1{#3}%
-      }%
-   }%
-\def\hangpar#1#2{%
-   \par\noindent\hangindent#1\refsize
-   \hbox to #1\refsize{\hfill#2}%
-   }%
-\def\@ddtab#1#2#3{%
-   {\l@twrite
-      \write#1{%
-         \line{%
-            \quad\strut#2\quad\h@tMother#3\h@tMother
-            \leaderfil\number\p@gecount
-            }%
-         }%
-      }%
-   }%
-%
-% MACROS FOR OUTPUTTING CITATIONS AND FOR RESETTING THEM
-%
-\def\re@dback#1#2#3#4{%
-   \ifnum#4>\z@
-      \ifproof\bigskip\else\endpage\fi
-      {\bf\centertitle#3}%
-      \immediate\closeout#1
-      \unlock\input#2\lock
-      \fi
-   }%
-\def\c@teout{%
-   \ifnum\r@ftotal>\z@
-      \ifproof\else\endpage\fi
-      \xdef\writeit{%
-         \write\ch@pterwrite{%
-            \line{%
-               \strut\h@tMother\r@fcaphead\h@tMother
-               \leaderfil\noexpand\number\p@gecount
-               }%
-            }%
-         }\writeit
-      \re@dback\r@fcapwrite\r@fcapfile\r@fcaphead\r@ftotal
-      \ifproof\else\endpage\fi
-      \fi
-   \ifv@ta
-      \endpage
-      \xdef\writeit{%
-         \write\ch@pterwrite{%
-            \line{%
-               \strut\h@tMother\v@tahead\h@tMother
-               \leaderfil\noexpand\number\p@gecount
-               }%
-            }%
-         }\writeit
-      \centertitle{\v@tahead}\v@ta
-      \fi
-   \iftableembed\else
-      \re@dback\t@bcapwrite\t@bcapfile\t@bcaphead\t@btotal
-      \fi
-   \iffigureembed\else
-      \re@dback\f@gcapwrite\f@gcapfile\f@gcaphead\f@gtotal
-      \fi
-   }%
-\def\c@tereset{%
-   \global\f@gcount\@ne
-   \global\t@bcount\@ne
-   \global\eq@count\@ne
-   \global\r@fcount\@ne
-   \global\f@gtotal\z@
-   \global\t@btotal\z@
-   \global\r@ftotal\z@
-   \n@llout\r@ftabwrite\r@ftabfile
-   \n@llout\r@fcapwrite\r@fcapfile
-   \n@llout\f@gtabwrite\f@gtabfile
-   \n@llout\f@gcapwrite\f@gcapfile
-   \n@llout\f@gfigwrite\f@gfigfile
-   \n@llout\t@btabwrite\t@btabfile
-   \n@llout\t@bcapwrite\t@bcapfile
-   \n@llout\t@bfigwrite\t@bfigfile
-   \n@llout\eq@write\eq@file
-   }%
-\adddef\b@dyreset{\c@tereset}%
-\def\c@teclear{%
-   \ifch@pterrenumber
-      \global\f@gcount\@ne
-      \global\t@bcount\@ne
-      \global\eq@count\@ne
-      \fi
-   \ifr@frenumber\global\r@fcount\@ne\fi
-   }%
-\def\f@gt@bhead{\f@gt@bheadfalse
-   \ifnum\t@btotal>\z@\f@gt@bheadtrue
-      \line{\strut\t@btabhead\leaderfil\romannumeral-\t@bpagecount}%
-      \fi
-   \ifnum\f@gtotal>\z@\f@gt@bheadtrue
-      \line{\strut\f@gtabhead\leaderfil\romannumeral-\f@gpagecount}%
-      \fi
-   }%
-% when text is missing, must still typeset the ref number.
-% show error messages in the documentation
diff --git a/macros/psizzl/fontdefs.psizzl b/macros/psizzl/fontdefs.psizzl
deleted file mode 100644
index 9a1b582c03..0000000000
--- a/macros/psizzl/fontdefs.psizzl
+++ /dev/null
@@ -1,221 +0,0 @@
-
-% FONTDEFS PSIZZL - fonts for use with version TeX 1.0,
-%
-% For reference,
-%                         default      pointsize       better(?)
-% Text                    10           12 point type   14
-% Equations               10           12 point type   14
-% Superscripts             7           10 point type   10
-% Supersuperscripts        5            8 point type    7
-% \message{load fonts}
-%
-%
-%===============================================================================
-%	PSIZZL uses too many fonts for the BNL VAX version of TeX. The sans
-% serif and small caps fonts have been removed with "%*****". Roman fonts are
-% substituted instead:
-\def\sr{\rm}		% Roman for sans-serif
-\def\cp{\rm}		% Roman for small caps
-% J. Haggerty and F. Paige, 5 Nov 1986
-%===============================================================================
-%
-%*****\font\fortyss   = cmssmc40                    % sanserif
-%
-\font\fifteenrm = cmr10    scaled\magstep4%    % roman       14.4 point
-\font\fourteenrm = cmr10    scaled\magstep3%    % roman       14.4 point
-%
-\font\twelverm = cmr10    scaled\magstep1%    % roman       12 point
-\font\twelvei  = cmmi10   scaled\magstep1%    % mathitalic  12 point
-\font\twelveit = cmti10   scaled\magstep1%    % italic      12 point
-\font\twelvebf = cmbx10   scaled\magstep1%    % boldface    12 point
-\font\twelvesy = cmsy10   scaled\magstep1%    % math        12 point
-\font\twelvesl = cmsl10   scaled\magstep1%    % slanted     12 point
-%*****\font\twelvess = cmss10   scaled\magstep1%    % sansserif   12 point
-\font\twelvett = cmtt10   scaled\magstep1%    % typewriter  12 point
-\font\twelveex = cmex10   scaled\magstep1%    % extra math  12 point
-%*****\font\twelvecp = cmcsc10  scaled\magstep1%    % capitals at 12 point
-%
-%*****\font\tencp  = cmcsc10                      % capitals at 10 point
-%*****\font\tenss  = cmss10                       % sansserif   10 point
-%
-\font\eightbf = cmbx8     scaled\magstep1%    % boldface    9.6 point
-\font\eightrm = cmr8      scaled\magstep1%    % roman       9.6 point
-\font\eightsl = cmsl8     scaled\magstep1%    % slanted     9.6 point
-%*****\font\eightss = cmssq8    scaled\magstep1%    % sans serif  9.6 point
-\font\eightsy = cmsy8     scaled\magstep1%    % symbols     9.6 point
-\font\eighti  = cmmi8     scaled\magstep1%    % math        9.6 point
-\font\eightit = cmti8     scaled\magstep1%    % text italic 9.6 point
-\font\eighttt = cmtt8     scaled\magstep1%    % typewriter  9.6 point
-%
-\font\sixbf   = cmbx7     scaled\magstep1%    % boldface    7.2 point
-\font\sixrm   = cmr7      scaled\magstep1%    % roman       7.2 point
-\font\sixsy   = cmsy7     scaled\magstep1%    % math        7.2 point
-\font\sixi    = cmmi7     scaled\magstep1%    % math italic 7.2 point
-%
-%\message{done fonts}%
-%*****\newfam\srfam
-%*****\newfam\cpfam
-%
-\def\rm{\fam0\fontrm }%
-\def\mit{\fam1 }%
-\def\cal{\fam2 }%
-\def\it{\fam\itfam\fontit}%
-%*****\def\sr{\fam\srfam\fontsr}%
-\def\sl{\fam\slfam\fontsl}%
-\def\bf{\fam\bffam\fontbf}%
-\def\tt{\fam\ttfam\fonttt}%
-%*****\def\cp{\fam\cpfam\fontcp}%
-\def\twelvep@int{% defines all the characteristics of twelve point type
-   \relax
-   \textfont0                 = \twelverm           % roman
-   \scriptfont0               = \eightrm
-   \scriptscriptfont0         = \sixrm
-   \let\fontrm                = \twelverm
-   %
-   \textfont1                 = \twelvei            % math italics
-   \scriptfont1               = \eighti
-   \scriptscriptfont1         = \sixi
-   %
-   \textfont2                 = \twelvesy           % math symbols
-   \scriptfont2               = \eightsy
-   \scriptscriptfont2         = \sixsy
-   %
-   \textfont3                 = \twelveex            % extended math
-   \scriptfont3               = \twelveex
-   \scriptscriptfont3         = \twelveex
-   % there is no name for this
-   %
-   \textfont\itfam            = \twelveit           % text italic
-   \let\fontit                = \twelveit
-   %
-%*****   \textfont\srfam            = \twelvess   % sans serif
-%*****   \let\fontsr                = \twelvess
-   %
-   \textfont\slfam            = \twelvesl           % slanted text
-   \let\fontsl                = \twelvesl
-   %
-   \textfont\bffam            = \twelvebf           % boldface
-   \scriptfont\bffam          = \eightbf
-   \scriptscriptfont\bffam    = \sixbf
-   \let\fontbf                = \twelvebf
-   %
-   \textfont\ttfam            = \twelvett           % typewriter
-   \let\fonttt                = \twelvett
-   %
-%*****   \textfont\cpfam            = \twelvecp          % caps & smallcaps
-%*****   \let\fontcp                = \twelvecp
-   %
-   \fontrm
-   \spaceparams
-   }%
-\def\tenp@int{% defines all the characteristics of ten point type
-   \relax
-   \textfont0                 = \tenrm            % roman
-   \scriptfont0               = \sevenrm
-   \scriptscriptfont0         = \fiverm
-   \let\fontrm                = \tenrm
-   %
-   \textfont1                 = \teni             % math italics
-   \scriptfont1               = \seveni
-   \scriptscriptfont1         = \fivei
-   %
-   \textfont2                 = \tensy            % math symbols
-   \scriptfont2               = \sevensy
-   \scriptscriptfont2         = \fivesy
-   %
-   \textfont3                 = \tenex             % extended math
-   \scriptfont3               = \tenex
-   \scriptscriptfont3         = \tenex
-   % there is no name for this
-   %
-   \textfont\itfam            = \tenit            % text italic
-   \let\fontit                = \tenit
-   %
-%*****   \textfont\srfam            = \tenss    % sans serif
-%*****   \let\fontsr                = \tenss
-   %
-   \textfont\slfam            = \tensl            % slanted text
-   \let\fontsl                = \tensl
-   %
-   \textfont\bffam            = \tenbf            % boldface
-   \scriptfont\bffam          = \sevenbf
-   \scriptscriptfont\bffam    = \fivebf
-   \let\fontbf                = \tenbf
-   %
-   \textfont\ttfam            = \tentt            % typewriter
-   \let\fonttt                = \tentt
-   %
-%*****   \textfont\cpfam            = \tencp           % caps & smallcaps
-%*****   \let\fontcp                = \tencp
-   %
-   \fontrm
-   \spaceparams
-   }%
-\def\spaceparams{% spacing parameters in a font-covariant form
-   % If we do \sevenrm\spaceparams,
-   % we will successfully switch to the new font at the correct spacing.
-   % We have taken 2.3ex to be the height of the current font.
-   \topskip                    2.3ex
-   \splittopskip               2.3ex
-   \smallskipamount= .75ex plus .25ex minus .25ex
-   \medskipamount  = 1.5ex plus .50ex minus .50ex
-   \bigskipamount  = 3.0ex plus 1.0ex minus 1.0ex
-   %
-   \parfillskip                  0ex plus 1fil
-   \parindent                  2.0em
-   \abovedisplayskip           3.8ex plus .57ex minus 1.7ex
-   \belowdisplayskip           3.8ex plus .57ex minus 1.7ex
-   \abovedisplayshortskip        0ex plus .68ex
-   \belowdisplayshortskip      1.6ex plus .68ex minus .91ex
-   \maxdepth                   .45ex
-   \splitmaxdepth          \maxdimen
-   \boxmaxdepth            \maxdimen
-   \setbox\strutbox\hbox{\vrule height 3ex depth .8ex width 0em}%
-   %
-   \hfuzz                     .023ex
-   \vfuzz                     .023ex
-   \delimitershortfall         1.2ex
-   \nulldelimiterspace         .27ex
-   \scriptspace                .11ex
-   \overfullrule               1.2ex
-   \thinmuskip                   3mu
-   \medmuskip                    4mu plus   2mu minus   4mu
-   \thickmuskip                  5mu plus   5mu
-   %
-   \s@tbaselines
-   }%
-\newskip\normalparskip
-\def\@nenhalf{1.5}%
-\def\s@tbaselines{%
-   \normallineskip                .23ex
-   \normalbaselineskip           2.76ex
-   \normallineskiplimit             0ex
-   \normalparskip                0.00ex plus .23ex minus .00ex
-   \refsize\hsize
-   \refbetweenskip\parskip
-   %
-   \lineskip\linesp@ce\normallineskip
-   \baselineskip\linesp@ce\normalbaselineskip
-   \lineskiplimit\linesp@ce\normallineskiplimit
-   \parskip\linesp@ce\normalparskip
-   }%
-\def\singlespace{%
-   \let\linesp@ce\@ne\s@tbaselines
-   }\let\linesp@ce\@ne
-\def\normalbaselines{%
-   \let\linesp@ce\@nenhalf\s@tbaselines
-   }%
-\def\doublespace{%
-   \let\linesp@ce\tw@\s@tbaselines
-   }%
-\hsize 6.0  true in
-\vsize 8.75 true in
-%
-\newdimen\refsize
-\newskip\refbetweenskip
-%
-\def\largetype{\twelvep@int}%
-%
-\def\mediumtype{\tenp@int}%
-%
-\mediumtype\singlespace
diff --git a/macros/psizzl/index.psizzl b/macros/psizzl/index.psizzl
deleted file mode 100644
index b0c0a81041..0000000000
--- a/macros/psizzl/index.psizzl
+++ /dev/null
@@ -1,91 +0,0 @@
-% INDEX PSIZZL - indexing macros for TeX version 1.0
-% index entries come in two visibilities - non-silent and silent
-% non-silent entries are preceeded by a ^
-% while silent entries are preceeded by ^^
-% the four types of non-silent entries are as follows
-% ^{text}   - type 0, normal
-% ^|text|   - type 1, TeX input, but not a control sequence
-% ^|\text|  - type 2, TeX control sequence
-% ^\<text>  - type 3, TeX concept, a mnemonic name
-%
-% the format of the entry in the index file is:
-% text_!n_pp.  where _ is a space, n is the index type,
-%                    pp is the page number
-%
-\newif\ifproofindex
-\let\numbercount=\relax
-\def\\{%
-   {\tt\char'134}%
-   }%
-\def\<{%
-   \relax\ifmmode\mskip\medmuskip\else\char'74\fi
-   }%
-\newwrite\@ndexwrite\def\@ndexfile{index.psiztemp }%
-\adddef\fmtreset{%
-   \immediate\openout\@ndexwrite=\@ndexfile % file for index reminders
-   }%
-\newif\ifsilent
-\def\specialhat{%
-   \relax\ifmmode\def\next{^}\else\let\next=\beginxref\fi\next
-   }%
-\def\beginxref{%
-   \futurelet\next\beginxrefswitch
-   }%
-\def\beginxrefswitch{%
-   \ifx\next\specialhat\let\next\silentxref
-      \else\silentfalse\let\next\xref
-      \fi
-   \next
-   }%
-{\c@tCactive\global\let^\specialhat\gdef\silentxref^{\silenttrue\xref}}%
-\c@tCactive\adddef\l@twrite\l@tCzero %this turns on indexing capability
-{\c@tVcontrol\c@tBactive|gdef\{}}% \ as an active character -> nothing
-\def\marginstyle{\vrule height6pt depth2pt width0pt \sevenrm}%
-\chardef\bslash=`\\
-\def\xref{%
-   \futurelet\next\xrefswitch
-   }%
-\def\xrefswitch{%
-   \begingroup
-      \ifx\next|%
-         \aftergroup\vxref % case 1 or 2, |arg| or |\arg|
-         \else
-         \ifx\next\<%
-            \aftergroup\anglexref % case 3, "\<arg>" means angle bracke
-            \else
-            \aftergroup\normalxref% case 0, "{arg}"
-            \fi
-         \fi
-      \endgroup
-   }%
-\def\vxref|{\c@tBactive\futurelet\next\vxrefswitch}%
-\def\vxrefswitch#1|{\c@tBcontrol
-   \ifx\next\empty
-      \def\xreftype{2}\def\next{{\tt\bslash\text}}% type 2, |\arg|
-      \else
-      \def\xreftype{1}\def\next{{\tt\text}}% type 1, |arg|
-      \fi
-   \edef\text{#1}\makexref
-   }%
-\def\anglexref\<#1>{%
-   \def\xreftype{3}\def\text{#1}\def\next{$\langle$\text$\rangle$}%
-   \makexref
-   }%
-\def\normalxref#1{%
-   \def\xreftype{0}\def\text{#1}\let\next=\text\makexref
-   }%
-\def\makexref{%
-   \ifproofindex
-      \insert\margin{\hbox{\marginstyle\text}}%
-      \xdef\writeit{%
-         \write\@ndexwrite{%
-            \text\space!\xreftype\space\noexpand\number\p@gecount.%
-            }%
-         }%
-      \writeit
-      \else\ifhmode\kern\z@\fi
-      \fi
-   \ifsilent\ignorespaces\else\next\fi
-   }%
-% the \insert (which is done in proofmode only) suppresses hyphenation,
-% so the \kern\z@ is put in to give the same effect in non-proofmode.
diff --git a/macros/psizzl/institut.psizzl b/macros/psizzl/institut.psizzl
deleted file mode 100644
index 824fb562f1..0000000000
--- a/macros/psizzl/institut.psizzl
+++ /dev/null
@@ -1,60 +0,0 @@
-% INSTITUT PSIZZL - hooks for the present institution
-% these hooks are for SLAC, if your institution is different
-% make the appropriate changes
-\adddef\fmtversion{ [SLAC] }%
-\institute{Stanford Linear Accelerator Center\breaktitle
-   Stanford University, Stanford, California 94305%
-   }%
-\university{Stanford University}%
-%
-\contract{%
-   Work supported by the US Department of Energy under
-   \hbox{DE-AC03-76SF00515}%
-   }%
-%
-\def\pubadmin{Ms. Crystal Tilghman, Publications Department at SLAC}%
-%
-\memohead{\bf SLAC\ \ MEMO}%
-%
-\letterhead
-   {\fourteenrm \uppercase{Stanford University}}%
-   {\twelvecp Stanford Linear Accelerator Center\cr
-      \ifstreetaddress 2575 Sand Hill Road\endline
-          Menlo Park, California\endline\fi
-      }%
-   {\eightit\kern-4exMail Address\cr
-    \ifx\s@nderbin\empty\else\s@nderbin\cr\fi
-    SLAC, P.O. Box 4349\cr Stanford, California 94305\cr}%
-   {\vbox to 1in{\vfil}}%
-\subtitle{%
-   A Dissertation\breaktitle
-   Submitted to the Department of Physics\breaktitle
-   and the Committee on Graduate Studies\breaktitle
-   of \@niversity\breaktitle
-   in partial fulfillment of the requirements\breaktitle
-   for the Degree of\breaktitle
-   Doctor of Philosophy\breaktitle
-   }%
-\unlock
-\def\r@portprice{%
-   Printed in the United States of America.  Available from the
-   National Technical Information Service, U.S. Department of Commerce,
-   5285 Port Royal Road, Springfield, Virginia  22161.
-   Price: \ Printed Copy \pr@ce , Microfiche A01.
-   }%
-\lock
-\def\sigstatement{%
-   {\narrower
-      {\noindent
-         I certify that I have read this thesis and that in my\hfil\break
-         opinion it is fully adequate, in scope and quality, as\hfil\break
-         a dissertation for the degree of Doctor of Philosophy.\par
-         \medskip
-         }%
-      }%
-   }%
-\sigpage{(Principal Adviser, SLAC)}%
-   {(Co-Signer, Physics)}%
-   {(SLAC)}%
-   {Dean of Graduate Studies}%
-   {Approved for the University Committee on Graduate Studies}%
diff --git a/macros/psizzl/letter.psizzl b/macros/psizzl/letter.psizzl
deleted file mode 100644
index 667e4b438d..0000000000
--- a/macros/psizzl/letter.psizzl
+++ /dev/null
@@ -1,244 +0,0 @@
-% LETTER PSIZZL - letter macros
-%
-% I am indebted to Louise Addis, SLAC, for help in designing the
-% style of the letter.
-%
-% The letter will print with your institution's letterhead.
-% You then take the letter and copy it on bond.
-% The original hardcopy becomes your file copy.
-%
-% \letterto{Name}{address}   Name will appear in the salutation.
-%                            note the comma or colon here.
-% e.g.,                      address will be the full address.
-% \letterto{John,}%          use \cr to separate lines.
-%    {Mr.@John Doe\cr%
-%     Physics Department\cr%
-%     University of California, Berkeley\cr%
-%     Berkeley, CA 94720\cr}%
-%
-% \letterfrom{signature}{mail stop}{initials}
-%                            initials will possibly appear at the foot of
-% e.g.,                      the letter
-% \letterfrom%               signature will appear in the close
-%    {Jane Doe\cr            address is incorporated in the letterhead
-%     Chief Honcho\cr}%
-%    {Bin 2}{JD}%
-%
-% \letterdate{date}          you may optionally specify the date of the
-%                            letter. The default date however, is today.
-% e.g., \letterdate{7 July 1983}%
-%
-% \salutation{Ave}%          here's how to modify the standard salutation
-%                            (default is Dear)
-%
-% \MyRef{text}%              specifies the writer's reference number for
-%                            this letter. Default is none.
-%                            If you use this you get Ref: <text> near
-%                            the top of the letter.
-%
-% \YourRef{text}%            similar to \MyRef. Specifies the reference
-%                            number of the addressee's letter to which
-%                            you're responding. Default is none.
-%
-% \copiesto{name\cr name\cr ...name\cr}%
-%                            specifies who gets copies of the letter
-%                            aside from the addressee. A list of names
-%                            will appear at the end of the letter.
-%                            Default is none
-%
-% \closing{Yours truly,}%    and how to modify the standard close
-%                            (default is Sincerely,)
-%
-% \everyletter{text}%        text to be inserted
-%                            at the end of every letter.
-%                            May be an entire letter body.
-%
-% \beginletter               the letter now begins on a new page
-%                            with date, address, salutation
-%
-% text                       now comes the text of the letter
-%
-% \endletter                 this puts out the closing
-%
-\newif\ifletter
-\newskip\lettertopskip\lettertopskip\z@ plus\z@ minus\z@
-\def\letterdate#1{%
-   \def\l@tterdate{#1}%
-   }\letterdate\d@te
-\def\salutation#1{%
-   \def\s@lutation{#1}%
-   }\salutation{Dear}%
-\def\closing#1{%
-   \def\cl@sing{#1}%
-   }\closing{Sincerely,}%
-\def\typist#1{%
-   \def\t@pist{:\lowercase{#1}}%
-   }\def\t@pist{}%
-\def\copiesto#1{%
-   \def\c@pies{%
-      \hbox{%
-         \vtop{\hbox{cc: }\vfil}%
-         \vtop{\singlespace
-            \halign{\vbox{\parindent\z@\hsize.8\hsize####}\hfil\cr
-               #1\crcr}%
-            }%
-         }%
-      \vskip\baselineskip
-      }%
-   }\def\c@pies{}%
-\def\postscript#1{%
-   \def\p@st{#1}%
-   }\def\p@st{}%
-\def\enclosure#1#2{%
-   \def\@ncl{%
-      {\par\parindent\z@#1\par\singlespace
-         \halign{%
-            \quad\vbox{\parindent\z@\hsize.8\hsize####}\hfil\cr
-            #2\crcr}\par
-         }%
-      }%
-   }\def\@ncl{}%
-\def\prescript#1{%
-   \def\pr@{#1}%
-   }\def\pr@{}%
-%
-\def\MyRef#1{%
-   \def\M@Ref{Ref: #1\cr}%
-   }\def\M@Ref{}%
-\def\YourRef#1{%
-   \def\Y@urRef{Your Ref: #1\cr}%
-   }\def\Y@urRef{}%
-%
-\def\breakletter{%
-   \par\vfil\eject
-   }% break the title page of a letter
-\def\letterto#1#2{%
-   \def\@ddressee{#1}\gdef\@ddress{#2}%
-   }\letterto{}{}%
-\def\letterfrom#1#2#3{%
-   \def\s@ndername{#1}\gdef\s@nderbin{#2}\gdef\s@nderinitials{#3}%
-   }\letterfrom{}{}{}%
-\def\letterstyle#1{%
-   \adddef\stylel@t{#1}%
-   }%
-\def\stylel@t{%
-   \let\bodynumbers=\topcentered
-   \vsize 8.3in
-   \raggedright
-   \p@geclear% set page number
-   \largetype\singlespace
-   \parindent 0em
-   \baselineskip 2.7ex
-   \parskip\medskipamount
-   }%
-\long\def\everyletter#1{\def\l@tterbody{#1}}\everyletter{}%
-\def\letter{%
-   \let\resd@c\resl@t
-   \let\pred@c\prel@t\let\styled@c\stylel@t\let\titd@c\titl@t
-   \let\frontd@c\frontl@t\let\endd@c\endl@t\lettertrue
-   }%
-\def\beginletter{\letter\begindocument}%
-\def\endletter{\enddocument}%
-\def\frontl@t{}%
-\def\resl@t{\endpage}%
-\def\prel@t{\beginbody}%
-\def\titl@t{%
-   \topinsert
-      \ifwindowenvelope
-         \translate{-.0in}{-1.5in}{%
-            \ifx\@ddress\empty\else
-               \vbox to 1.in{%
-                  \singlespace\baselineskip 2.7ex\vss
-                  \halign to 4.35in{\tabskip\z@
-                     ##\hss\tabskip\z@ plus 1fil\cr\@ddress\crcr
-                     }\vss
-                  }%
-               \fi
-            }%
-         \nointerlineskip
-         \fi
-      \l@tterhead
-      \endinsert
-   \fr@nttrue
-   \rightline{\l@tterdate}\vskip\the\baselineskip
-   \tempfalse
-   \ifx\M@Ref\empty\else\temptrue\fi\ifx\Y@urRef\empty\else\temptrue\fi
-   \iftemp
-      \rightline{%
-         \vbox{%
-            \singlespace\halign{##\hfil\cr\M@Ref\Y@urRef}%
-            }%
-         }%
-      \par
-      \fi
-   \vfil
-   \vskip\lettertopskip
-   \ifwindowenvelope\vskip1.20in\else
-      \ifx\@ddress\empty\else
-         {%\singlespace\indent
-            \hbox{\vbox{\halign{##\hfil\cr\@ddress\crcr}}}%
-            }%
-         \par
-         \vskip2\parskip
-         \fi
-      \fi
-   \par\pr@\par
-   \ifx\@ddressee\empty\else
-      \medskip\s@lutation\ \@ddressee\par\medskip
-      \fi
-   }%
-\def\endl@t{%
-   \l@tterbody
-   \par
-   \ifx\s@ndername\empty\else
-      \nobreak\vskip 4.5ex%
-      \line{%
-         \hbox to .51\hsize{\hfil}\hskip\z@ minus 1fil
-         \vbox{\singlespace\baselineskip 2.7ex%
-            \halign{##\hfil\cr\cl@sing\cr\noalign{\nobreak\vskip.4in}%
-               \s@ndername \crcr
-               }%
-            }%
-         \hskip\z@ plus 1fill
-         }%
-      \fi
-   {\normalbaselines
-      \ifx\s@nderinitials\empty\else
-         \par\s@nderinitials\t@pist\par
-         \fi
-      \@ncl
-      \c@pies
-      {\singlespace\p@st\par}%
-      }%
-   \vfil\eject
-   \gdef\t@pist{}\gdef\c@pies{}\gdef\M@Ref{}\gdef\Y@urRef{}%
-   \gdef\pr@{}\gdef\p@st{}%
-   \letterfalse
-   }%
-\newdimen\h@ght\h@ght=1in
-\newdimen\l@tterheadsize\l@tterheadsize\hsize
-\def\letterhead#1#2#3#4{%
-   \def\l@tterhead{%
-      \ifletterhead
-         \l@tterheadsize\hsize\advance\l@tterheadsize0in
-         \centerline{%
-            \vbox{\hsize\l@tterheadsize
-               \centerline{\vbox{\halign{####\hfil\cr#1\crcr}}}%
-               \line{%
-                  \singlespace\baselineskip 2.7ex%
-                  \vbox to \h@ght{\vss\halign{####\hfil\cr#2\crcr}\vss}%
-                  \hss
-                  \vbox to \h@ght{\vss\halign{####\hfil\cr#3\crcr}\vss}%
-                  }%
-               }%
-            }%
-         \else#4\fi
-      }%
-   }%
-\newif\ifletterhead\letterheadtrue
-\newif\ifstreetaddress
-\newif\ifwindowenvelope
-% review all of the \letterto's by typesetting them plus
-\def\p@genumberletter{%
-   \p@gebanner{\l@tterdate}{}{Page\qquad\numorroman\p@gecount}%
-   }%
diff --git a/macros/psizzl/lists.psizzl b/macros/psizzl/lists.psizzl
deleted file mode 100644
index c0eee0e335..0000000000
--- a/macros/psizzl/lists.psizzl
+++ /dev/null
@@ -1,172 +0,0 @@
-% LISTS PSIZZL - macros for lists, numbered and unnumbered
-%
-\gdef\d@m{.08}%
-\gdef\sd@m{.13}%
-\gdef\ssd@m{.195}%
-%
-% UNNUMBERED LISTS
-%
-% This is similar to the Itemized List Macro except it doesn't
-% number the items.  Instead it allows you to pick a symbol to
-% highlight the line.
-%
-% \itembegin{<symbol>}text   You pick the symbol to be used.
-%                            It then applies to all following items.
-%
-% \item text                 Each additional item in the series.
-%
-% \itemcon text              Used to continue an xitem when you have
-%                            more than one paragraph in the item:
-%                            you get a blank instead of a symbol.
-%
-% \sitembegin{<symbol>}      Use these as above. The sub-item list
-% \sitem                     is indented a bit farther.
-% \sitemcon
-%
-% \ssitembegin{<symbol>}     Sub-sub-item list macros
-% \ssitem
-% \ssitemcon
-%
-% A blank line or a \par will end the item and give you a new paragraph.
-% If you don't want a new paragraph at the end of the xitem,
-% type `\par\noindent' to end the item
-%
-\def\itemset#1{%
-   \gdef\items@m{#1}%
-   }\itemset{\bull}%
-\def\itembegin#1{%
-   \itemset{#1}\item
-   }%
-\def\it@m{%
-   \hangpar\d@m
-   }%
-\def\item{%
-   \it@m{\items@m\quad}%
-   }%
-\def\itemcon{%
-   \it@m{}%
-   }%
-%
-\def\sitemset#1{%
-   \gdef\sitems@m{#1}%
-   }\sitemset{\astr}%
-\def\sitembegin#1{%
-   \sitemset{#1}\sitem
-   }%
-\def\sit@m{%
-   \hangpar\sd@m
-   }%
-\def\sitem{%
-   \sit@m{\sitems@m\quad}%
-   }%
-\def\sitemcon{%
-   \sit@m{}%
-   }%
-%
-\def\ssitemset#1{%
-   \gdef\ssitems@m{#1}%
-   }\ssitemset{\crcl}%
-\def\ssitembegin#1{%
-   \ssitemset{#1}\ssitem
-   }%
-\def\ssit@m{%
-   \hangpar\ssd@m
-   }%
-\def\ssitem{%
-   \ssit@m{\ssitems@m\quad}%
-   }%
-\def\ssitemcon{%
-   \ssit@m{}%
-   }%
-%
-%
-% ITEMIZED LIST MACRO
-%
-% These commands are used to make xitemized lists, to write
-% outlines or make points within a body of text.
-%
-% \pointbegin text           To start a list.  The list will be
-%      or                    numbered in Arabic numerals and
-% \pointbegin                indented. You can begin the text
-% text                       after the \pointbegin command -
-%                            separated by a space - or you can
-%                            begin on the following line.
-%
-% \point text                Subsequent items in the list.
-%
-% \pointcon text             If you want a point to contain more
-%                            than one paragraph, but you don't want
-%                            to generate a new number, use
-%                            \pointcon text.  This will also work
-%                            with \spointcon and \sspointcon.
-%
-% \spointbegin text          To begin a sub-point list; indented,
-%                            lowercase Roman letter, in ( ).
-%
-% \spoint text               To continue a sub-point list.
-%
-% \sspointbegin text         To start a sub-sub-point list;
-%                           indented, lowercase Roman numerials,
-%                            in ( ).
-%
-% \sspoint text              To continue a sub-sub-point list.
-%
-% A blank line or a \par will end the item and give you a new paragraph.
-% If you don't want a new paragraph at the end of the item,
-% type `\par\noindent' to end the item
-%
-\newcount\p@ntcount
-\def\p@ntinit{%
-   \p@ntcount\@ne
-   }%
-\def\p@ntreset{%
-   \sp@ntinit\sp@ntreset
-   }%
-\def\pointbegin{%
-   \p@ntinit\point
-   }%
-\def\point{%
-   \p@ntreset\it@m{\p@nttext\p@ntcount.\quad}%
-   \bumpcount\p@ntcount
-   }%
-\def\pointcon{%
-   \it@m{}%
-   }%
-\let\p@nttext\numorroman
-%
-\newcount\sp@ntcount
-\def\sp@ntinit{%
-   \sp@ntcount`a
-   }%
-\def\sp@ntreset{%
-   \ssp@ntinit\ssp@ntreset
-   }%
-\def\spointbegin{%
-   \sp@ntinit\spoint
-   }%
-\def\spoint{%
-   \sp@ntreset\sit@m{\sp@nttext\sp@ntcount.\quad}%
-   \bumpcount\sp@ntcount
-   }%
-\def\spointcon{%
-   \sit@m{}%
-   }%
-\let\sp@nttext\char%
-%
-\newcount\ssp@ntcount
-\def\ssp@ntinit{%
-   \ssp@ntcount\@ne
-   }%
-\def\ssp@ntreset{}%
-\def\sspointbegin{%
-   \ssp@ntinit\sspoint
-   }%
-\def\sspoint{%
-   \ssp@ntreset\ssit@m{\number\ssp@ntcount.\quad}%
-   \bumpcount\ssp@ntcount
-   }%
-\def\sspointcon{%
-   \ssit@m{}%
-   }%
-\let\ssp@nttext\numorroman
-%
diff --git a/macros/psizzl/macros.psizzl b/macros/psizzl/macros.psizzl
deleted file mode 100644
index 136d8831a7..0000000000
--- a/macros/psizzl/macros.psizzl
+++ /dev/null
@@ -1,167 +0,0 @@
-% MACROS PSIZZL - macros for use with Psizzl
-%
-% begin rewrite of PLAIN macros
-% end rewrite of PLAIN macros
-\hyphenation{mac-ro}%
-\catcode`\@=11
-\chardef\l@tter=11
-\chardef\@oline=5
-\chardef\@ther=12
-\chardef\c@ntrol=00
-%  unlock macro names with @ key
-\def\unlock{\catcode`\@=\l@tter}% @ character can be used in macro names
-%  lock up the macros
-\def\lock{\catcode`\@=\@ther}% macros using this character are now locked
-%
-\def\c@tAactive{\catcode`\&=\active}%
-\def\c@tAalign{\catcode`\&=4}{\c@tAalign\gdef\h@tAalign{&}}%
-{\c@tAactive\gdef\l@tAalign{\let&\h@tAalign}}%
-\def\c@tAset{\c@tAactive\ifnum\c@tAactive\l@tAalign\fi}%
-%
-\def\c@tMother{\catcode`\^^M=\@ther}%
-\def\c@tMeoline{\catcode`\^^M=\@oline}%
-\def\c@tMactive{\catcode`\^^M=\active}%
-{\c@tMactive%
-   \gdef\l@tMother{\let ^^M=\h@tMother}%
-   \gdef\l@tMspace{\let ^^M=\space}%
-   \gdef\h@tMactive{^^M}%
-   }%
-{\c@tMother\gdef\h@tMother{^^M}}%
-\newlinechar`\^^M
-%
-\def\c@tVset{\ifnum\catcode`|=\active\l@tVother\fi}%
-\def\c@tVcontrol{\catcode`|=\c@ntrol}%
-\def\c@tVactive{\catcode`|=\active}%
-\def\c@tVother{\catcode`|=\@ther}%
-{\c@tVother\gdef\h@tVother{|}}%
-{\c@tVactive\gdef\l@tVother{\let|\h@tVother}\gdef\l@tVzero{\let|=0}}%
-%
-{\catcode`\%=\@ther\gdef\percent{%}}%
-\def\c@tBother{\catcode`\\=\@ther}%
-\def\c@tBactive{\catcode`\\=\active}%
-\def\c@tBcontrol{\catcode`\\=\c@ntrol}%
-\def\c@tLQactive{\catcode`\`=\active}%
-\def\c@tCactive{\catcode`\^=\active}%
-{\c@tCactive\gdef\l@tCzero{\let^=0}}%
-{% \outer plaintex macros not to be recognized during a \write
-   \let\settabs=0\let\+=0\let\beginsection=0\let\proclaim=0\let\bye=0%
-   \gdef\l@tplain{% all \outer and all that use \ifmmode
-      \let\settabs=0\let\+=0\let\beginsection=0\let\proclaim=0\let\bye=0%
-      \let~=0\let\footnote0%
-      \let\strut0\let\dots0\let\ph@nt0\let\smash0%
-      }%
-   }%
-\def\l@twrite{\l@tplain\let\underscore=0}%
-%
-\def\Psizzl{%
-   P%
-   \kern-.30em\lower.70ex\hbox{s}%
-   \kern-.08em\lower.0 ex\hbox{i}%
-   \kern-.05em\lower.0 ex\hbox{z}%
-   \kern-.17em\lower.5 ex\hbox{z}%
-   \kern-.09em\lower.2 ex\hbox{l}%
-   }%
-\def\fmtreset{}\def\fmtuser{my\fmtname\relax}%
-\def\fmtjob{%
-   \CMS{CP SMSG GJMSINK PSIZZLLL \fmtversion\space\jobname}%
-   \message{This is \fmtname, Version \fmtversion}%
-   \fmtreset
-   \input\fmtuser
-   }%
-\everyjob={\fmtjob}%
-%
-% cute and otherwise desirable-to-have macros
-%
-\newif\iftemp % scratch if macro
-\newcount\tempcount% scratch count register
-\def\diagnostics{%
-   %\tracingonline\@ne
-   \tracingcommands\tw@\tracingstats\tw@
-   \tracingpages\@ne
-   %\tracingoutput\@ne\tracinglostchars\@ne
-   \tracingmacros\@ne\tracingparagraphs\@ne
-   %\tracingrestores\@ne
-   %\showboxbreadth\maxdimen\showboxdepth\maxdimen
-   %\errorstopmode
-   }%
-\def\adddef#1#2{%
-   \toks\z@=\expandafter{#1}\toks\@ne={#2}%
-   \xdef#1{\the\toks\z@\the\toks\@ne}%
-   }%
-\def\logit#1{\immediate\write-1{\meaning#1}}%
-%
-\def\endp@ge{\par \vfill \eject}%
-\def\endle@f{\endp@ge\ifodd\pageno\else\hrule height\z@\endp@ge\fi}%
-\let\endpage\endp@ge\let\endleaf\endp@ge
-%
-\def\underscore#1{$\underline{\smash{\hbox{#1}}}$}%
-%
-\def\leaderfil{\leaders\hbox to 2em{\hss.\hss}\hfil}%
-%
-\def\centertitle#1{\par\noindent\hfil #1\hfil\par}% center text
-%
-\def\breaktitle{\hfil\par\noindent\hfil}% break text
-%
-\def\d@te{\the\day\tie\monthword\tie\the\year}%
-\def\monthdayyear{% alternate date format
-   \gdef\d@te{\monthword\tie\the\day,\tie\the\year}%
-   }%
-\def\date#1{\gdef\d@te{#1}}%
-\def\thedate{\d@te}%
-\chardef\vx@=60\newcount\hour\newcount\minute
-\def\fildec#1{\ifnum#1<10 0\fi\the#1}%
-\def\thetime{% \thetime -> 09:36 e.g.: `This job was run at \thetime.'
-   \hour\time\divide\hour\vx@
-   \minute-\hour\multiply\minute\vx@\advance\minute\time
-   \fildec\hour:\fildec\minute
-   }%
-\def\bumpcount#1{%
-   \ifnum#1<\z@\let\temp\m@ne\else\let\temp\@ne\fi
-   \global\advance#1\temp
-   }%
-\def\numorroman#1{%
-   \ifnum#1<\z@\romannumeral-#1\else\number#1\fi
-   }%
-\def\lapcomma{\llap{,}}%
-% characters and things
-%
-% macro to assist in breaking paragraphs, use in place of \par, or
-% blank line, terminating the paragraph in question.
-\def\padline#1{\line{\ #1\ }}%
-\def\thinhrule{\hrule height.4pt}%
-\def\thinvrule{\vrule width .4pt}%
-\def\loosepar{{\tolerance1000\par}}%
-\def\noraggedright{\rightskip\z@skip\spaceskip\z@skip\xspaceskip\z@skip}%
-\def\p@int{.}%
-\def\d@sh{--}%
-\def\hidenull#1{\setbox\z@=\vbox{#1}\ifdim\ht\z@=\z@\else#1\endline\fi}%
-\def\translate#1#2#3{%\translate{<Xdimen>}{<Ydimen>}{thing}
-   \vbox to\z@{\offinterlineskip
-      \kern-#2\hbox to\z@{\kern#1{#3}\hss}\vss
-      }%
-   }%
-% macros for the \CMS command: \write 15
-\chardef\fift@@n=15
-\global\chardef\CMSwrite=\fift@@n
-\wlog{\string\CMSwrite=\string\write\fift@@n}%
-\outer\def\newwrite{\alloc@7\write\chardef\fift@@n}%
-\def\CMS{\immediate\write\CMSwrite}%
-% macros to flag superseded commands
-\def\supercede#1#2{%
-   \def#1{%
-      \toks@\expandafter{\csname
-         Instead of \string#1, you should use \string#2. \go@on
-         \endcsname}%
-      \errhelp\toks@
-      \errmessage{Psizzl: \string#1 has been superseded by \string#2}#2%
-      }%
-   }%
-\def\go@on{%
-   Before you run this job again, please change your TeX source file.
-   Do `CONSPIRE CHECK TEX' to see the new command syntax.
-   This is just a warning: you may continue processing by giving a <CR>.
-   }%
-% following macros flag superseded commands
-\supercede\memotopic\memosubject
-\supercede\group\memohead
-\def\sample#1{{\let\end\relax\input #1 \endpage}\listfile{#1}}%
diff --git a/macros/psizzl/memo.psizzl b/macros/psizzl/memo.psizzl
deleted file mode 100644
index cd96e19d7b..0000000000
--- a/macros/psizzl/memo.psizzl
+++ /dev/null
@@ -1,74 +0,0 @@
-% MEMO PSIZZL  - memo macros
-%
-% \memodate{<date>}          The default date is today's date,
-%                            but here's how you can change it.
-%
-% \memohead{<header for the memo>}  This will be the header for the memo
-%                            the default is `\bf MEMO'
-%
-% \memoto{<people>}          To whom the memo is addressed
-%
-% \memofrom{<someone>}       Who it's from
-%
-% \memosubject{<subject>}    The subject of the memo
-%
-% \memostyle{\largetype}     Your choices about:
-%                            \singlesided\doublesided
-%                            \singlespace\doublespace
-%
-% \memo                      This specifies that the document is a memo
-% \begindocument             Following this you put the text.
-%
-% <text>                     Enter your text here
-%
-% \enddocument               This will end the memo
-%
-\def\memohead#1{%
-   \def\m@mohead{{#1}}%
-   }\memohead{\bf MEMO}%
-\def\memodate#1{%
-   \def\m@modate{#1}%
-   }\memodate{\d@te}%
-\def\memoto#1{%
-   \def\m@moto{#1}%
-   }\memoto{}%
-\def\memofrom#1{%
-   \def\m@mofrom{#1}%
-   }\memofrom{}%
-\def\memosubject#1{%
-   \def\m@mosubject{#1}%
-   }\memosubject{}%
-\def\memostyle#1{%
-   \adddef\stylem@m{#1}%
-   }%
-\def\stylem@m{%
-   \singlesided\largetype\singlespace
-   }%
-\newif\ifm@mo
-\def\memo{%
-   \let\pred@c\prem@m\let\styled@c\stylem@m\let\titd@c\titm@m
-   \let\frontd@c\frontm@m\let\endd@c\endm@m\m@motrue
-   }%
-\def\p@genumbermemo{%
-   \p@gebanner{\m@modate}{\m@mohead}{\p@genumber}%
-   }%
-\def\prem@m{\beginbody}%
-\def\frontm@m{}%
-\def\endm@m{}%
-\def\beginmemo{\memo\begindocument}%
-\def\endmemo{\enddocument}%
-\def\titm@m{%
-   \fr@nttrue
-   \line{\m@mohead\hfill Date: \m@modate}%
-   \vskip\@nenhalf\normalbaselineskip
-   \vbox{\halign{\parindent\z@
-      \cp##\hfil\quad&\vtop{\hsize.8\hsize\noindent##}\hfil\cr
-      To:&\m@moto\cr
-      From:&\m@mofrom\cr
-      Subject:&\m@mosubject\cr
-      }   }%
-   \par \vskip 3.0ex \hrule height .8pt\vskip 3.0ex
-   }%
-\def\endm@m{%
-   \par\vfil\@ncl\c@pies\vfil\eject\gdef\c@pies{}\gdef\@ncl{}%
-   }%
diff --git a/macros/psizzl/mypsizzl.tex b/macros/psizzl/mypsizzl.tex
deleted file mode 100644
index c478c7b1ae..0000000000
--- a/macros/psizzl/mypsizzl.tex
+++ /dev/null
@@ -1,30 +0,0 @@
-\message{Using HAGGERTY's MYPSIZZL TEX}%
-\memohead{\bf BNL E-787 MEMO}%
-\memofrom{John Haggerty}%
-\letterfrom{John S. Haggerty}{}{}%
-\salutation{Dear}%
-\closing{Sincerely,}%
-\letterhead{%
-   \fourteenrm{Brookhaven National Laboratory}\cr
-   }{%
-   }{%
-   Building 510A\cr
-   Upton, New York 11973\cr
-   (516) 282-7894\cr
-   }{%
-   }%
-\def\nextline{\unskip\nobreak\hskip\parfillskip\break}
-\institute{%
-Lawrence Berkeley Laboratory and Department of Physics\breaktitle
-University of California, Berkeley, California 94720\breaktitle
-Stanford Linear Accelerator Center\breaktitle
-Stanford University, Stanford, California 94305\breaktitle
-Department of Physics\breaktitle
-Harvard University, Cambridge, Massachusetts  02138\breaktitle
-   }%
-%
-\contract{%
-   This work was supported in part by the Department of Energy, contracts
-   DE-AC03-76SF00515 (SLAC), DE-AC03-76F00098 (LBL),
-   and DE-AC02-76ER03064 (Harvard).
-   }%
diff --git a/macros/psizzl/options.psizzl b/macros/psizzl/options.psizzl
deleted file mode 100644
index ef5d3cbe9c..0000000000
--- a/macros/psizzl/options.psizzl
+++ /dev/null
@@ -1,135 +0,0 @@
-% OPTIONS PSIZZL - contains all the journal-dependent stuff
-%
-% Publication names
-%  - also include the pub's editor here for the cover letter
-%
-\def\j@urnalname{}%
-\def\j@urnaladdress{}%
-\def\j@urnaleditor{}%
-\def\APS{\conference American Physical Society}%
-\def\IEEE{%
-   \hsize 4.625 true in \vsize 12.8125 true in
-   \let\pubsize\largetype
-   \multiply\scalein4\divide\scalein3%
-   \figureembedtrue\tableembedtrue
-   %the photoready copy will be reduced by a factor of .75
-   %\conference
-   }%
-\def\NIM{\journal\foreign%
-   %single column=3in double column=6.3in
-   % in duplicate, with separate list of figure captions
-   % copy of copies of figures attached to original manuscript
-   % \nopagenumbers
-   \gdef\j@urnalname{Nuclear Instruments and Methods}%
-   \gdef\j@urnaladdress{Professor K. Siegbahn, Editor \cr
-      Nuclear Instruments and Methods \cr
-      Institute of Physics \cr
-      University of Uppsala \cr
-      Sweden \cr
-      }%
-   \gdef\j@urnaleditor{Professor Siegbahn:}%
-   \j@urnalname
-   }%
-\def\NPB{\journal\foreign%
-   \gdef\j@urnalname{Nuclear Physics B}%
-   \gdef\j@urnaladdress{Professor D. Cline \cr
-      Nuclear Physics B \cr
-      Department of Physics \cr
-      University of Wisconsin \cr
-      457 North Charter Street \cr
-      Madison, Wisconsin  53706 \cr
-      }%
-   \gdef\j@urnaleditor{Professor Cline:}%
-   \j@urnalname
-   }%
-\def\PRL{\journal%
-   \gdef\j@urnalname{Physical Review Letters}%
-   \gdef\j@urnaladdress{Professor George Trigg, Editor \cr
-      Physical Review Letters \cr
-      1 Research Road \cr
-      Box 1000 \cr
-      Ridge, New York \cr
-      }%
-   \gdef\j@urnaleditor{Professor Trigg:}%
-   \j@urnalname
-   }%
-\def\PRD{\journal%
-   \gdef\j@urnalname{Physical Review D}%
-   \gdef\j@urnaladdress{Professor D. L. Nordstrom, Editor \cr
-      Physical Review D \cr
-      1 Research Road \cr
-      Box 1000 \cr
-      Ridge, New York \cr
-      }%
-   \gdef\j@urnaleditor{Professor Nordstrom:}%
-   \j@urnalname
-   }%
-\def\PL{\journal\foreign%
-   \gdef\j@urnalname{Physics Letters B}%
-   \gdef\j@urnaladdress{Professor Howard Georgi \cr
-      Physics Letters B \cr
-      Lyman Laboratory of Physics \cr
-      Harvard University \cr
-      Cambridge, MA  02138 \cr
-      }%
-   \gdef\j@urnaleditor{Professor Georgi:}%
-   \j@urnalname
-   }%
-\def\foreign{% foreign publication style
-   \bracketreference\lowercasecite\volyearpageref
-   }%
-\def\journal{%
-   %\doublespace
-   }%
-\def\conference{%
-   \p@genumbernonetrue
-   \singlespace
-   }%
-% other possibilities: conferences, no linenumbers
-%% page dimensions: 6.1(1) by 8.60(75), near center
-%
-%% conference papers are in single(12) or singlehalf spacing(19) _
-%% journal articles are doublespaced(24)
-%
-%% IEEE: special long box: 4.625 by 12.8125
-%
-\newif\ifdraft
-\newif\ifproof
-\newif\ifthesis% this is a thesis
-\newif\ifsubmit% this copy of paper to be submitted
-\def\pubside{}%
-\def\illn#1{\ifproof{\it[Illustration number #1]}\fi}%
-\def\illndraft{%
-   \ifproof
-      \point The {\it[Illustration numbers]}
-      which appear in the Figure and Table captions
-      will not appear in the published editions.
-      \fi
-   }%
-\def\draft{% invoke this if the paper is a draft
-   \prooftrue\drafttrue
-   \mediumtype\normalbaselines\singlesided
-   \figureembedfalse\tableembedfalse
-   }%
-\def\proof{% proof format
-   \prooftrue\proofindextrue
-   \mediumtype\singlespace\doublesided
-   \figureembedtrue\tableembedtrue
-   }%
-\def\submit{% to be submitted to a journal for re-typesetting
-   \largetype\normalbaselines\singlesided
-   \figureembedfalse\tableembedfalse\submittrue
-   }%
-\def\preprint{% preprint format -
-   \figureembedtrue\tableembedtrue\let\picture\blankp@c
-   \largetype\singlespace%\baselineskip2.0ex
-   %\landscape
-   %\beginmulticolumn2%
-   }%
-\def\landscape{%
-   \quadsided
-   \vsize8.5in \hsize5.75in \pagesize\hsize
-   %\def\gutter{\vrule width .5in height 0pt depth 0pt}%
-   \thesisstyle{\quadsided}\publicationstyle{\quadsided}%
-   \memostyle{\quadsided}\reportstyle{\quadsided}%
-   }%
diff --git a/macros/psizzl/output.psizzl b/macros/psizzl/output.psizzl
deleted file mode 100644
index 991105cea5..0000000000
--- a/macros/psizzl/output.psizzl
+++ /dev/null
@@ -1,200 +0,0 @@
-% OUTPUT PSIZZL - output routine for publications
-% singlesided    : page numbers in fixed location
-% doublesided    : alternating page numbers at left/right
-% quadsided      : alternating page numbers at foot and top
-% nopagenumbers  : disables all pagenumbering
-% bottomcentered : bottom centered page numbers
-% topcentered    : top centered page numbers
-% bottomnumbers  : bottom outside page numbers
-% topnumbers     : top outside page numbers
-\newdimen\evenoffset\newdimen\oddoffset
-% Even and odd leaves of output are shifted by these respective amounts
-% in order to have a proper binding margin.
-\newcount\p@gecount
-\def\pageset#1{\p@gecount#1}%
-\def\p@geclear{\global\p@gecount\@ne}\adddef\fmtreset{\p@geclear}%
-\def\p@gefront{\global\p@gecount\m@ne}\adddef\resd@c{\p@gefront}%
-\newcount\le@f\le@f=\@ne
-\newcount\p@geroman\p@geroman\m@ne
-\newif\iffr@nt
-\newif\ifdoubleside
-\newif\ifquadside
-\def\singlesided{\quadsidefalse \doublesidefalse}%
-\def\doublesided{%
-   \quadsidefalse\doublesidetrue%\evenoffset.2in\oddoffset-.05in
-   }%
-\def\quadsided{%
-   \quadsidetrue\doublesidefalse%\evenoffset.2in\oddoffset-.05in
-   \let\endleaf\endle@f
-   }%
-\newif\ifp@genumberleft
-\newif\ifp@genumbertop
-\newif\ifp@genumbernone
-\newif\ifp@genumbercenter
-\adddef\resd@c{%
-   \let\frontnumbers=\bottomcentered\let\bodynumbers=\topoutside
-   }%
-\def\nopagenumbers{\p@genumbernonetrue}%
-\def\bottomcentered{\p@genumbertopfalse\p@genumbercentertrue}%
-\def\topcentered{\p@genumbertoptrue\p@genumbercentertrue}%
-\def\bottomoutside{\p@genumbertopfalse\p@genumbercenterfalse}%
-\def\topoutside{\p@genumbertoptrue\p@genumbercenterfalse}%
-\def\p@gehead{\ifp@genumbertop\p@genumberline\else\p@genumbernull\fi}%
-\def\p@gefoot{\ifp@genumbertop\p@genumbernull\else\p@genumberline\fi}%
-\def\b@ndp@ge#1#2{\ifp@genumberleft{#2}\else{#1}\fi}%
-\def\p@gebanner#1#2#3{%
-   \line{{\rm\lapline{\b@ndp@ge{#1}{#3}}{#2}{\b@ndp@ge{#3}{#1}}}}%
-   }%
-\def\lapline#1#2#3{\rlap{#1}\hfil#2\hfil\llap{#3}}%
-%
-% set up the defaults
-%
-\singlesided\topoutside % default pagenumbering format
-%
-\newinsert\margin\dimen\margin\maxdimen
-% This pagenumber is same as in PLAIN but does not impose \tenrm
-\gdef\p@genumber{{\bf\numorroman\p@gecount}}%
-\def\p@genumberline{%
-   \iffr@nt
-      \p@genumbernull
-      \else
-      \ifletter\p@genumberletter\else
-         \ifm@mo\p@genumbermemo\else
-            \p@genumberpaper
-            \fi
-         \fi
-      \fi
-   }%
-\def\p@genumbernull{\vbox to \z@{}}%
-\def\makep@genumber{% output.psizzl
-   \ifnum\p@gecount<\z@\frontnumbers\else\bodynumbers\fi
-   \ifdoubleside
-      \ifodd\pageno\hoffset\evenoffset\p@genumberleftfalse
-         \else\hoffset\oddoffset\p@genumberlefttrue
-         \fi
-      \fi
-   \ifquadside
-      \ifodd\pageno\p@genumberlefttrue\else\p@genumberleftfalse\fi
-      \ifodd\le@f
-         \p@genumbertopfalse\voffset\evenoffset
-         \else\p@genumbertoptrue\voffset\oddoffset
-         \fi
-      \fi
-   \ifp@genumbernone\fr@nttrue\fi
-   \count\@ne\number\p@gecount
-   %\count\tw@\number\le@f
-   }%
-\def\p@gecontents{%
-   \ifvoid\margin\else
-      \p@gebanner{}{}{%
-         \hbox to\z@{\b@ndp@ge{}{\hss}%
-            \hbox{\vbox to \z@{\box\margin\vss}}\b@ndp@ge{\hss}{}%
-            }%
-         }%
-      \fi
-   \ifvoid\topins\else\unvbox\topins\fi
-   \unvbox\@cclv
-   \ifvoid\footins\else\vskip\skip\footins\vskip-0.68ex
-      \hrule width.25\hsize\vskip1.82ex
-      \unvbox\footins
-      \fi
-   \ifr@ggedbottom\vfill\fi
-   }%
-\def\p@gebox#1{%
-   \vbox{% \boxmaxdepth=\the\maxdepth\offinterlineskip
-      %\offinterlineskip
-      \p@gehead\vskip\normalbaselineskip
-      \c@lumnbox{#1}%
-      \vskip\normalbaselineskip\p@gefoot
-      }%
-   }%
-\def\c@lumnbox#1{%
-   \vbox to \vsize{#1}%
-   }%
-\def\bumple@fnumber{% counter for total leaves. Quad: Two pages per leaf
-   \ifodd\pageno\global\advance\le@f\@ne\fi
-   }%
-\def\bumpp@genumber{%
-   \iffr@nt\global\fr@ntfalse\fi
-   \ifnum\p@gecount<\z@ % register for the page label `page number'
-      \global\advance\p@gecount\m@ne
-      \global\p@geroman=\number\p@gecount
-      \else\global\advance\p@gecount\@ne
-      \fi
-   \global\advance\pageno\@ne % counter for total pages
-   }%
-\def\fmtoutput#1{%
-   \makep@genumber\l@twrite\shipout#1\bumpp@genumber\bumple@fnumber
-   }%
-\def\eject@ns{%
-   \ifnum\outputpenalty>-20000 \else\dosupereject\fi
-   }%
-\output{\fmtoutput{\p@gebox{\p@gecontents}}\eject@ns}%
-\newdimen\pagesize\pagesize\hsize
-\newcount\c@lumncount\newcount\c@lumntotal
-\def\gutter{\thinvrule}%
-\def\pageline{\hbox to\pagesize}%
-\newbox\c@lumni\newbox\c@lumnii\newbox\c@lumniii
-\newbox\c@lumniv\newbox\c@lumnv
-\def\@@nd{\endmulticolumn\@nd}\let\@nd\end
-\def\beginmulticolumn#1{% arg = number of columns per page < 6
-   \@ndmulticolumn
-   \topskip\z@\r@ggedbottomtrue
-   \c@lumntotal#1\c@lumncount\c@lumntotal
-   \pagesize\hsize\let\g@tter\gutter % save \gutter where it can't go bad
-   \setbox\z@\hbox{\g@tter}\advance\hsize\wd\z@
-   \divide\hsize\number\c@lumntotal\advance\hsize-\wd\z@ % new \hsize
-   \output{\multic@lumn{\c@lumnbox{\p@gecontents}}\eject@ns}%
-   }%
-\def\@ndmulticolumn{%
-   \endpage\supereject
-   \message{\string\c@lumncount=\number\c@lumncount}%
-   \loop\ifnum\c@lumncount<\c@lumntotal\null\endpage\repeat
-   \hsize\pagesize\c@lumntotal\@ne
-   \let\markl\empty\let\markr\empty\let\marko\empty % null these, too
-   }%
-\def\endmulticolumn{%
-   \mark{}\@ndmulticolumn
-   }%
-\def\multic@lumn#1{\rm % switch back just in case
-   \def\l@toutput{%
-      \l@twrite\let\leftline\z@\let\bf\z@
-      \let\allmark\z@\let\nomark\z@\let\inimark\z@
-      }%
-   \ifx\markl\empty
-      {\l@toutput\xdef\markl{\firstmark}}%
-      {\let\allmark\relax\let\nomark\relax\let\inimark\relax
-         \setbox\z@\hbox{\titleline\markl}%
-         \setbox\@ne\hbox{\titleline\empty}%
-         \ifdim\wd\z@=\wd\@ne
-         {\l@toutput\xdef\markl{\botmark}}%
-            \fi
-         }%
-      %\message{\string\markl=\markl.}%
-      \fi
-   \ifcase\c@lumncount
-      \or\c@lumnformat{#1}\or\s@tb@x\c@lumni#1\or\s@tb@x\c@lumnii#1%
-      \or\s@tb@x\c@lumniii#1\or\s@tb@x\c@lumniv#1\or\s@tb@x\c@lumnv#1%
-      \fi
-   \global\advance\c@lumncount\m@ne
-   % if the current heading is not yet finished,
-   % insert the column header for this heading into the vertical list
-   \botmark
-   }%
-\def\g@tb@x#1{\ifdim\wd#1=\z@\else\box#1\g@tter\fi}%
-\def\s@tb@x{\global\setbox}%
-\def\c@lumnformat#1{%
-   \fmtoutput{%
-      \vbox{%
-         \p@gehead
-         {\l@twrite
-            \pageline{%
-               \g@tb@x\c@lumnv\g@tb@x\c@lumniv\g@tb@x\c@lumniii
-               \g@tb@x\c@lumnii\g@tb@x\c@lumni#1\hfil
-               }%
-            }%
-         \p@gefoot
-         }%
-      \global\advance\c@lumncount\c@lumntotal
-      }%
-   }%
diff --git a/macros/psizzl/picture.psizzl b/macros/psizzl/picture.psizzl
deleted file mode 100644
index 66194c529d..0000000000
--- a/macros/psizzl/picture.psizzl
+++ /dev/null
@@ -1,48 +0,0 @@
-% PICTURE PSIZZL - macros for making pictures
-%
-% see <GDUBOIS> frontpanel
-%
-\def\insertGRAY#1#2#3{%
-   \hbox{%
-      \translate{\z@}{#2}{\special{insert(#3)}}%
-      \blankbox{#1}{#2}%
-      }%
-   }%
-\def\insertimPRESS#1#2#3{%
-   \hbox{%
-      \translate{-0.50in}{-0.75in}{\special{mergeug(#3)}}%
-      \blankbox{#1}{#2}%
-      }%
-   }%
-\def\insertUGS#1#2#3{%
-   \hbox{\special{mergeug(#3)}\blankbox{#1}{#2}}%
-   }%
-\adddef\l@twrite{% define in macros
-   \let\insertGRAY\z@\let\insertimPRESS\z@\let\insertUGS\z@
-   }%
-\newdimen\b@xitkern\b@xitkern3pt
-\newdimen\b@xitrule\b@xitrule.4pt
-\def\boxit#1{%
-   \vbox{\hrule height\b@xitrule
-      \hbox{\vrule width\b@xitrule\kern\b@xitkern
-         \vbox{\kern\b@xitkern\hbox{#1}\kern\b@xitkern}%
-         \kern\b@xitkern\vrule width\b@xitrule
-         }%
-      \hrule height\b@xitrule
-      }%
-   }%
-\def\unraise{%
-   \dimen@-\b@xitkern\advance\dimen@-\dp\strutbox
-   \leavevmode\raise\dimen@
-   }%
-\def\blankbox#1#2{%
-   \vrule width\z@ depth\z@ height#2%
-   \vrule height\z@ depth\z@ width#1%
-   }%
-\newdimen\scalein\scalein 1in%
-\def\fr@methick{1pt}%
-\def\fr@me#1#2{\def\fr@mewidth{#1}\def\fr@meheight{#2}}%
-\def\blankp@c#1#2{\vbox{\hbox{\blankbox{#1}{#2}}}}%
-\def\picture#1#2{%
-   \boxit{\blankbox{#1}{#2}}%
-   }%
diff --git a/macros/psizzl/psizzl.commands b/macros/psizzl/psizzl.commands
deleted file mode 100644
index a2737cce66..0000000000
--- a/macros/psizzl/psizzl.commands
+++ /dev/null
@@ -1,312 +0,0 @@
-  PSIZZL COMMANDS - reference manual
- 
-             Reference guide to Psizzl macros
- This is a list of all the user macros in Psizzl.
- They are grouped logically according to function.
- 
-MACROS
- 
-These macros are general-purpose macros used
-everywhere in Psizzl, or are of general interest.
-    \Psizzl - this gives the logo: Psizzl
-    \diagnostics - turns on tracing diagnostics
-    \endpage - causes a page break
-    \underscore#1 -
-       gives the argument, \underscore{{\it underscored}}
-    \leaderfil - gives leaders of dots:\hbox to 1in{(\leaderfil)}
-    \centertitle#1 - along with |\breaktitle|, below, gives a centered
-       title, whose line breaks are controlled by the user
-    \breaktitle - to be used with |\centertitle| to break the lines
-    \monthdayyear - causes the date used in \Psizzl macros to appear
-       as {\sl ``month day, year''}, instead of {\sl ``day month year''},
-       which is the default.
-    \date#1 - sets the date to the argument. See also  |\letterdate| and
-          |\pubdate|.
-    \loosepar - To be used to terminate any paragraph which
-       has an overfull |\hbox|, due to the line breaker not working.
-    \unlock - To ``unlock'' the macros, so that the character `|@|'
-       may be used in macro names.
-    \lock - To undo |\unlock|.
- 
-    \adddef#1#2 - adds #2 to the \def of #1
-    \bumpcount#1 - increases the absolute value of \count#1 by 1
-    \numorroman#1 - expands to arabic if \count#1 is positive, and to
-       roman if \count#1 is negative
-    \lapcomma - gives a comma which will overlap the chracter to the left
-    \translate#1#2#3 - causes TeX to typeset the object specified by #3
-       at the postion specified by X = #1 and Y = #2 relative to the
-       current postion. The current position is not, however, changed.
-    \iftemp  - this is a `scratch' switch. It can be used at any time.
- 
-LISTS
- 
-These are the macros pertaining to lists.
-    \itembegin#1 - Starts an itemized list and sets the symbol to the
-       argument.
-    \item - Makes an entry in an itemized list with the current symbol.
-    \itemcon - Continues an item in a list starting with a new paragraph.
-    \itemset#1 - sets the symbol to #1, but does not begin an item.
- 
-    \sitembegin#1 - Similar to |\itembegin|, for a subitem.
-    \sitem - Similar to |\item|, for a subitem.
-    \sitemcon - Similar to |\itemcon|, for subitem.
-    \sitemset#1 - Similar to |\itemset|, for a subitem.
- 
-    \ssitembegin#1 - Similar to |\itembegin|, for a subsubitem.
-    \ssitem - Similar to |\item|, for a subsubitem.
-    \ssitemcon - Similar to |\itemcon|, for subsubitem.
-    \ssitemset#1 - Similar to |\itemset|, for a subsubitem.
- 
-    \pointbegin - Start a sequential list of points.
-    \point - Put another item in a seqential list.
-    \pointcon - Like |\itemcon| for a sequentail list.
- 
-    \spointbegin - Like |\pointbegin|, for a sublist.
-    \spoint - Like |\point|, for a sublist.
-    \spointcon - Like |\pointcon|, for a sublist.
- 
-    \sspointbegin - Like |\pointbegin|, for a subsublist.
-    \sspoint - Like |\point|, for a subsublist.
-    \sspointcon - Like |\pointcon|, for a subsublist.
- 
-PICTURE
-These macros facilitate making pictures.
-     \blankbox#1#2 - Makes a blank box of the specified dimensions.
-     \scalein - An inch dimension which magnifies with the type size.
-     \boxit#1 - Put a box around the argument.
-     \picture#1#2 - Currently just |\blankbox|.
- 
-FONTDEFS
-These define the fonts used in \Psizzl.
-% `X' denotes that the font is loaded
-% suffixes:   rm  ss  fib  i it  bf  sy  sl  ss  tt  x  caps
-% prefixes:
-% \twelve      X   X       X  X   X   X   X   X   X  X    X
-% \ten         X   X       X  X   X   X   X   X   X  X    X
-% \eight       X           X      X   X   X
-% \seven       X           X      X   X
-% \five        X           X      X   X
- 
-% e.g.: \twelverm is a roman font at 12 point
-%       \tencaps  is a cap/smallcap font at 10 pt
- 
-% Plus the following special fonts:
-%    \fortyss
-%    \fifteenrm
-%    \fourteenrm
-%    \tenex
-The following macros are defined in this file:
- 
-     \singlespace - Set to single spaced lines.
-     \normalbaselines - Set to one-and-one-half spaced lines.
-     \doublespace - Set to double spaced lines.
-     \largetype - Set to large type size.
-     \mediumtype - Set to medium type size.
- 
-OPTIONS
-These macros turn on various switches, which control how
-certain options are used in \Psizzl depending on what publication
-you are writing for.
- 
-    \APS - American Physical Society.
-    \IEEE - IEEE.
-    \NIM - Nuclear Instruments and Methods.
-    \NPB - Nuclear Physics B.
-    \PRL - Phys. Rev. Letters.
-    \PRD - Phys. Rev. D.
-    \PL - Physics Letters.
-    \illn#1 - when in |\proof| mode, it expands to ``Illn. #''
-    \draft - Specifies that this is a draft.
-    \preprint - Specifies that this is a preprint.
-    \proof - Specifies that this is a proof copy.
-    \submit - Specifies that this will be submitted to a journal.
-    \foreign - selects specifications for non-APS journals
-    \journal - selects specifications for journal articles
-    \conference - selects specifications for conference proceedings
-    \ifdraft - flag: this is the draft style of a document
-    \ifproof - flag: this is the proof style of a document
-    \ifsubmit - flag: this is the submit style of a document
- 
-OUTPUT
-These macros control how the output will appear on the page.
-   \ifdoubleside - flag: the document will be double sided
-   \ifquadside - flag: the document will be two-pages-per-leaf
- 
-PUBLICAT
-These macros generate the title page of a publication,
-and indirectly invoke some switches.
-    \docspec#1 - document specifications. Appear in upper right of title
-        page
-    \contract#1 - Defines the contract to be cited.
-    \contracttrue - Specifies that the given contract is to be cited.
-    \title#1 - Title of the document.
-    \subtitle#1 - specify the subtitle of a document.
-    \authors#1 - Author list.
-    \institute#1 - The publishing institution.
-    \submittedto#1 - The journal to be submitted to.
-    \abstract#1 - The abstract.
-    \university#1 - Specify the university of the thesis student
-    \price#1 - Specify the price code of NTIS
-    \workingauthor#1 - Specify the working author.
-    \workingauthorbin#1 - Specify the mail stop of the working author.
-    \workingauthoraddress#1
-        {Specify the address of the workin g author.
-    \publicationstyle#1 - macros to be invoked at the beginning of the
-         publication
-    \publication - specify that document will be a publication
-    \thesisstyle#1 - macros to be invoked at the beginning of the thesis.
-    \thesis - specify that document will be a thesis
-    \reportstyle#1 - macros to be invoked at the beginning of a report.
-    \report - specify that document will be a report
-    \acknowledge#1 - specify the text of the acknowledgement
-    \begindocument - begin production of the specified document.
-       Title page, etc. are produced now.
-    \enddocument - end production of the document.
-    \sigpage#1#2#3#4#5 - specify details of signature page of a thesis.
-    \iffrontmatter - flag: the front matter of the document is to be
-        produced.
-    \ifabstractsigned - flag: the abstract page is to be signed.
-    \ifcopyright - flag: this document is to be copyrighted.
- 
-MEMO
-These macros will cause a memo to be produced.
-    \memohead#1 - Specify the header of the memo.
-       Default is institution-dependent
-    \memodate#1 - Specify the date of the memo.
-    \memoto#1 - Who the memo is to.
-    \memofrom#1 - Who the memo is from.
-    \memosubject#1 - Specify the topic of the memo.
-    \beginmemo - To begin the memo.
-    \endmemo - To end the memo.
-    \memostyle#1 - Specify the style of the memo.
- 
-LETTER
-These macros control how letters are made.
-    \letterdate#1 - Specify the date of the letter.
-    \salutation#1 - Specify the salutation.
-    \closing#1 - Specify the closing.
-    \typist#1 - Specify the initials of the typist.
-    \copiesto#1 - Specify the cc:
-    \MyRef#1 - Specify your reference number.
-    \YourRef#1 - Specify the receiver's reference number.
-    \breakletter - Break the page at this point.
-    \letterto#1#2 - Name and address of the receiver.
-    \letterfrom#1#2#3 - Specify the sender.
-    \everyletter#1 - Text to be included in every letter.
-    \beginletter - Begin the letter.
-    \endletter - End the letter.
-    \letterhead#1#2#3#4 - Specify the letterhead.
-    \postscript#1 - specify the postscript of the letter
-    \enclosure#1#2 - specify the enclosures of the letter
-    \prescript#1 - specify the prescript of the letter
-    \letterstyle#1 - macros to be invoked at the start of the letter
-    \ifletter - flag: for output routine: this is a letter
-    \ifletterhead - flag: a letterhead is to be produced. Default: true
-    \ifstreetaddress - flag: the street address of the institution
-       is to appear in the letterhead. default: false.
-    \ifwindowenvelope - flag: the address of the letter will be typeset
-       so that it will appear within the window of a window envelope.
-CHAPTERS
-The body of a document (be it publication, memo, or letter)
-are produced by these macros.
-    \beginbody - Begin the body of the paper.
-    \chapter#1 - Begin a new chapter.
-    \beginappendices - Subsequent |\chapter|s will be appendices.
-    \endbody - End the body. Get out list of references, \etc
-    \section#1 - Start a bew section.
-    \subsection#1 - Start a new subsection.
-    \subsubsection#1 - Start a new subsubsection.
- 
-CITATION
-Citations such as references, figures, tables and equations are
-done by these macros.
- 
-In the following macros,
-#1 is a valid TeX control squence name
-(`\' followed by alphabetic characters only: don't use any numerals!).
- 
-Where the macros use `=', they are defining the mnemonic name, so
-\<NAME> must not have been previously defined. (Hint: use some CAPITALS).
-Once this has been done, the mnemonic name can be used with the macro
-without the `=' and following one (or three) arguments:
-e.g.: first use: `\cite\DrellYan={Private communication}'
-      second use: `\Reference\DrellYan\ has clearly shown....'
- 
-In the reference, equation, and author address macros,
-#2 is the text of the respective thing being defined.
- 
-    REFERENCES:
-    The following three macros set the style of the reference:
-    \superreference - References will be superscripted: `$^{#1}$'
-    \bracketreference - References will appear in brackets: `[#1]'
-    \parenreference - References will appear in parenthesis: `(#1)'
- 
-    The following five macros define or cite references:
-    \cite#1=#2 - Define a new reference and put out, e.g.: `$^{#1}$'
-    \hideref#1=#2 - define a new reference, but don't put out any text.
-       This is how multiple references are produced.
-    \bareref#1=#2 - define a new reference, and put out #1 only (bare).
-    \reference#1=#2 - Define a new reference and put out `Ref.#1'
-    \Reference#1=#2 - Define a new reference and put out `Reference #1'
- 
-    \refspec#1,#2(#3)
-        Specify a reference in a way that the journal style can switch.
-    \volyearpageref - |\refspec| will be: volume, year, page.
-    \cernref - References will appear in CERN's style.
- 
-    EQUATIONS:
-    \equation#1=#2 - Define a new equation.
-    \Equation#1=#2 - Define a new equation.
-    \display#1=#2  - define a new equation and display it.
- 
-    AUTHOR ADDRESS SPECIFICATION:
-    \authoraddress#1=#2 - define a new authoraddress
-    \presentaddress#1=#2 - define a new authoraddress
-       as `Present address: #2'
-    \addressreference - specify author addresses to be references
-    \addressfootnote - specify author addresses to be footnotes
-    \addressinline - specify author addresses to be inline
- 
-    In the figure and table macros,
-    #2 is the title of the figure or table, which will appear in the
-    table of contents.
-    #2 and #3 concatenated together constitute the caption of the figure
-    or table.
-    #4 will be the contents of the figure or table itself.
- 
-    FIGURES:
-    \figure#1=#2#3#4 - Define a new figure and put out `Fig.#1'
-    \Figure#1=#2#3#4 - Define a new figure and put out `Figure #1'
-    \iffigureembed - figures are to be imbedded into the text.
-       Default: true.
- 
-    TABLES:
-    \table#1=#2#3#4 - Define a new table and put out `table #1'
-    \Table#1=#2#3#4 - Define a new table and put out `table #1'
-    \iftableembed - tables are to be embedded into the text.
-       Default: true.
- 
-    MISC:
-    \hangpar#1#2 - starts a paragraph with hanging indentation.
-    \lowercasecite - Citations will be lower case, not upper.
-    \vita#1 - specify a curriculum vitae for this document
-    \hyphen - punctuation for equations and multiple references
-    \comma  - punctuation for multiple references
-    \lapperiod - a period which overlaps to the left.
- 
- 
-VERBATIM
-These are the macros for verbatim scanning.
-     \begintt - Begin verbatim mode.
-     \endtt - End verbatim mode.
-     |stuff| - Verbatim mode, inline.
-     \listfile#1 - Make a listing of the specified file.
-     \iflistnumber - flag: \listfile produces a numbered listing.
- 
-INDEX
-These are the macros for doing the index of a document.
-They can each turn into a ``silent'' index entry by doubling the `^'
-   ^\{text} - Ordinary index entry.
-   ^\|text| - A special term, index entry.
-   ^\|\text| - A control sequence, index entry.
-   ^\<text> - A bracketed concept, index entry.
diff --git a/macros/psizzl/psizzl.doc b/macros/psizzl/psizzl.doc
deleted file mode 100644
index b1c9b1469d..0000000000
--- a/macros/psizzl/psizzl.doc
+++ /dev/null
@@ -1,41 +0,0 @@
-PSIZZL DOC - introduction to Psizzl macros for TeX version 1.1
- 
-This disk contains the TeX macro package PSIZZL.
-It is to be used in conjunction with Tex82 ver. 1.1
- 
-To use these macros,
-prepare a TeX input file of filetype `TEX',
-and give the (CMS) command `TEX &PSIZZL <filename>',
-where <filename> is the name of your file.
- 
-You may want to make a file called MYPSIZZL TEX,
-which would have your customized Psizzl macros on it.
-A dummy version of this file is provided.
- 
-The file `PSIZZL ARCHLIST' contains a listing of all the distribution
-Psizzl files.
- 
-A file `PSIZZL COMMANDS' gives a listing of the user commands in Psizzl,
-along with a discussion of how to use them.
- 
-Models (templates) for various types of jobs, such as letters, memos,
-papers, reports, theses, chapters, lists, figures, tables, and references
-may be found in the files `* TEMPLATE'.
-These files may be edited directly into Psizzl input files.
-Note the file `PSIZZL TEMPLATE', which shows how to
-surround your file with the appropriate commands to run it.
- 
-For CMS systems, there are two REXX exec files which, respectively
-carry on a dialog with the user to build Psizzl letters and memos.
-In addition, there is a file called `PSIZBILD' which builds the
-PSIZZL FMT file.
- 
-A document describing these macros, ``Psizzl Macros'' is available
-as SLAC-REPORT-268 from the author,
-Arthur Ogawa, CLA B226, Bin 96, SLAC, Stanford, CA 94305,
-(415) 854-3300 X2698,
-vmid `OGAWA' at `SLACVM' on net `BITNET'.
-Future releases of Psizzl will have this paper online.
- 
-Any problems, questions, suggestions for improvements, etc.
-should be sent to Ogawa.
diff --git a/macros/psizzl/psizzl.tex b/macros/psizzl/psizzl.tex
deleted file mode 100644
index a2c7bb4c8d..0000000000
--- a/macros/psizzl/psizzl.tex
+++ /dev/null
@@ -1,27 +0,0 @@
-% Psizzl  TeX - macros for use with TeX version 1, format PLAIN
-%             - high level macros          A. Ogawa, Dec   1983
-%
-\ifx\fmtname\undefined\input plain % INITEX run
-   \else\let\dump\relax\fi % VIRTEX run: no \dump's
-\def\plain{plain}\ifx\fmtname\plain\else
-   \message{\fmtname\space is already loaded. I quit.}\endinput\fi
-\def\psizzl{Psizzl}\let\fmtname\psizzl\def\fmtversion{0.35}%
-\def\fmtext{\fmtname}%    this may require changing in some systems
-\input symbols.\fmtext  % symbol definitions and public macros
-\input macros.\fmtext   % include macros common to all of this package
-\input lists.\fmtext    % item lists
-%\input picture.\fmtext  % macros for making pictures
-\input fontdefs.\fmtext % define fonts and families
-\input options.\fmtext  % implement the switches
-\input publicat.\fmtext % title page for publications
-\input memo.\fmtext     % memo formatter
-\input letter.\fmtext   % letter formatter
-\input chapters.\fmtext % body, chapter, section, subsection
-\input citation.\fmtext % references, figures, tables, equations
-\input verbatim.\fmtext % verbatim scanning macros
-\input index.\fmtext    % indexing macros
-\input output.\fmtext   % output formatting
-\input institut.\fmtext % hooks for the present institution
-\lock                   % lock the macro names with @ key
-\fmtjob                 % do what \everyjob normally does
-\dump                   % if INITEX was used, dump the fmt file
diff --git a/macros/psizzl/psizzl.txt b/macros/psizzl/psizzl.txt
deleted file mode 120000
index e6e778eec1..0000000000
--- a/macros/psizzl/psizzl.txt
+++ /dev/null
@@ -1 +0,0 @@
-psizzl.doc
\ No newline at end of file
diff --git a/macros/psizzl/publicat.psizzl b/macros/psizzl/publicat.psizzl
deleted file mode 100644
index 0d8edaa21f..0000000000
--- a/macros/psizzl/publicat.psizzl
+++ /dev/null
@@ -1,317 +0,0 @@
-% PUBLICAT PSIZZL  - macros for thesis, report and publication
-%
-%  macros for all documents
-%
-\def\docspec#1{%
-   \def\sp@cd@c{#1}%
-   }\docspec{}%
-\def\contract#1{%
-   \def\c@ntract{#1}%
-   }\contract{}%
-\def\title#1{%
-   \def\t@tle{#1}%
-   }\title{}%
-\def\subtitle#1{%
-   \def\s@btitle{#1}%
-   }\subtitle{}%
-\def\titlefootnote#1{%
-   \def\t@tlefoot{#1}%
-   }\titlefootnote{}%
-\def\authors#1{%
-   \def\@uthors{#1}%
-   }\authors{}%
-\def\institute#1{%
-   \def\@nstitute{#1}%
-   }\institute{}%
-\def\submittedto#1{%
-   \def\j@urnal{#1}%
-   }\submittedto{}%
-\long\def\abstract#1{%
-   \long\def\@bstract{#1}%
-   }\abstract{}%
-\long\def\longempty{}%
-\long\def\acknowledge#1{%
-   \long\def\@cknowledge{#1}%
-   }\acknowledge{}%
-\def\@bstrhead{Abstract}%
-\def\@cknwhead{Acknowledgments}%
-\newif\iffrontmatter\frontmattertrue
-\newif\ifabstractsigned
-\newif\ifcopyright
-\def\p@genumberpaper{%
-   \ifp@genumbercenter\p@gebanner{}{\p@genumber}{}%
-      \else\p@gebanner{}{}{\p@genumber}%
-      \fi
-   }%
-\def\workingauthor#1{%
-   \def\w@rkauth{#1}%
-   }\workingauthor{}%
-\def\workingbin#1{%
-   \def\w@rkbin{#1}%
-   }\workingbin{}%
-\def\workingaddress#1{%
-   \def\w@rkadd{#1}%
-   }\workingaddress{}%
-\newif\iftitlepage\titlepagetrue
-\def\begindocument{% to appear at beginning of any document
-   \resd@c\p@gefront\styled@c\p@ststyle
-   \pred@c
-   \iftitlepage\titd@c\fi
-   \iffrontmatter\frontd@c\fi
-   }%
-\def\enddocument{%
-   \endd@c
-   }%
-\def\p@ststyle{}%
-\def\resd@c{\endpage}%
-\adddef\fmtreset{\resd@c}%
-\def\specd@c{%
-   \ifx\sp@cd@c\empty\else
-      \rightline{\vbox{\singlespace\halign{##\hfil\cr\sp@cd@c\endline}}}%
-      \fi
-   }%
-\def\copyrightpage{%
-   \vbox to \z@{}\vfil%
-   \centertitle{\copyright\ Copyright\ \the\year\breaktitle
-      by\breaktitle\@uthors
-      }%
-   \endpage
-   }%
-\def\signrule{\vrule width3in height -2.5pt depth 3pt}%
-\def\signee#1{%
-   \rightline{%
-      \vbox{%\smallinterlineskip
-         \halign{\hfil##\hfil\cr\noalign{\bigskip}\signrule\cr#1\crcr}%
-         }%
-      }%
-   }%
-\def\sigpage#1#2#3#4#5{%
-   \gdef\s@gpage{%
-      \vfil
-      \sigstatement\signee{#1}\medskip
-      \sigstatement\signee{#2}\medskip
-      \sigstatement\signee{#3}\bigskip#5\bigskip
-      \signee{#4}%
-      \vfil\eject
-      }%
-   }%
-\def\abspage{%
-   \ifx\@bstract\longempty\else
-      \ifabstractsigned
-         \smallskip
-         \centertitle{\t@tle}\bigbreak
-         \centerline{\@uthors , Ph.D.}%
-         \centerline{\@niversity ,\ \the\year}
-         \medskip
-         \par \@bstract
-         \medskip\vfil
-         \rightline{%
-            \vbox{%\smallinterlineskip
-               \halign{\hfil##\hfil\cr
-                  Approved for publication:\hfill\cr
-                  \noalign{\bigskip}By\space\signrule\cr
-                  For Major Department\cr
-                  \noalign{\bigskip}By\space\signrule\cr
-                  Dean of Graduate Studies\cr
-                  }%
-               }%
-            }%
-         \endpage
-         \else
-         \centerline{\bf\@bstrhead}%
-         \medskip
-         \par\@bstract
-         {\@ddch@pt{\@bstrhead}{\noexpand\strut}}%
-         \endpage
-         \fi
-      \fi
-   }%
-\def\dedicate{\def\d@dicate}%
-\def\d@dicathead{Dedication}%
-\def\dedicatpage{%
-   \ifx\d@dicate\empty\else\endpage
-      \centerline{\bf\d@dicathead}\medskip\d@dicate
-      \begingroup\l@twrite\@ddch@pt{\d@dicathead}{\noexpand\strut}\endgroup
-      \fi
-   }%
-\def\ackpage{%
-   \ifx\@cknowledge\longempty\else\endpage
-      \centerline{\bf\@cknwhead}\medskip\par\@cknowledge
-      {\@ddch@pt{\@cknwhead}{\noexpand\strut}}%
-      \endpage
-      \fi
-   }%
-\def\contentspages{%
-   \immediate\write\ch@pterwrite{\noexpand\t@bcontents}%
-   \immediate\write\ch@pterwrite{\noexpand\f@gt@bhead}%
-   \t@cpagecount=\number\p@gecount
-   }%
-%
-% macros for publications
-%
-\def\publicationstyle#1{%
-   \adddef\stylep@b{#1}%
-   }%
-\def\publication{%
-   \let\pred@c\prep@b\let\styled@c\stylep@b\let\titd@c\titp@b
-   \let\frontd@c\frontp@b\let\endd@c\endp@b
-   }%
-\def\stylep@b{%
-   \largetype\normalbaselines\singlesided
-   }%
-\def\prep@b{}%
-\def\frontp@b{}%
-\def\titp@b{% to appear at beginning of pub
-   \specd@c
-   \vfil
-   {\bf\let\t@tlefoot\c@ntract
-      \centertitle{%
-         \uppercase{\t@tle}%
-         \ifx\t@tlefoot\empty\else\footnote{$^\ast$}{{\rm\t@tlefoot}}\fi
-         }%
-      }\medskip
-   {\singlespace\cp\centertitle\@uthors}%
-   \ifc@teaddress\medskip{\it\centertitle\@nstitute}\fi
-   \ifx\@bstract\empty\else
-      \midinsert
-         \medskip
-         %\hsize=\refsize
-         \centerline{\bf\@bstrhead}\medskip
-         \par \@bstract
-         \endinsert
-      \fi
-   \ifx\j@urnal\empty\else
-      \medskip\centertitle{Submitted to \j@urnal}%
-      \fi
-   \vfil\supereject
-   }%
-\def\endp@b{%
-   \ifsubmit\ifx\j@urnal\empty\else\letp@b\fi\fi
-   }%
-\def\letp@b{% if paper is to be submitted, this is the cover letter
-   {%
-      \singlesided
-      \letterto{\j@urnaleditor}{\j@urnaladdress}%
-      \letterfrom{\w@rkauth\endline
-         \ifx\w@rkadd\empty\else\w@rkadd\endline\fi
-         }{\w@rkbin}{}%
-      \closing{Sincerely yours,}%
-      \enclosure{Enclosures}{}%
-      \beginletter\l@tp@b\endletter
-      }%
-   }%
-\newbox\glossies
-\def\gl@ssies#1#2{%
-   \ifnum#1>\z@
-      \global\setbox\glossies
-      \hbox{\ifnum\wd\glossies=\z@\else\unhbox\glossies\ and\ \fi
-         \number#1\ #2\ifnum#1>\@ne s\fi
-         }%
-      \fi
-   }%
-\def\l@tp@b{%
- 
-   Enclosed are three copies of a manuscript entitled,
-   {\def\breaktitle{\relax}``{\bf\t@tle}''}
-   which we are submitting for publication in \j@urnalname .
-   \setbox\glossies\hbox{}%
-   \gl@ssies\f@gtotal{figure}\gl@ssies\t@btotal{table}%
-   \ifnum\wd\glossies=\z@\else
-      Glossies of the \unhbox\glossies\
-      are included with one of the copies.
-      \fi
- 
-   Please send correspondence to me at the
-   \ifx\w@rkadd\empty above address.
-      \else following address:%
-      \halign{\indent##\hfil\cr\w@rkauth\cr\w@rkadd.\cr}%
-      \par\noindent
-      \fi
-   However, please send the Publication Charge Certification form
-   directly to \pubadmin .
- 
-   Thank you for your consideration of this paper.
-   }%
-%
-% Macros for thesis
-%
-\def\university#1{%
-   \gdef\@niversity{#1}%
-   }\university{}%
-\def\thesisstyle#1{%
-   \adddef\styleth@{#1}%
-   }\def\styleth@{%
-   }%
-\def\thesis{%
-   \let\pred@c\preth@\let\styled@c\styleth@\let\titd@c\titth@
-   \let\frontd@c\frontth@\let\endd@c\endth@
-   }%
-\def\preth@{%
-   \abstractsignedtrue\fr@nttrue\abspage
-   }%
-\def\titth@{%
-   \endpage\p@gefront\fr@nttrue
-   \vbox to \z@{}\vfil%
-   {\cp\centertitle{\t@tle}}\vfil
-   \ifx\s@btitle\empty\else{\cp\centertitle{\s@btitle}}\vfil\fi
-   \centertitle{\@uthorpre\@uthors\breaktitle\@uthorpost}%
-   \vfil\eject
-   }%
-\def\@uthorpre{%
-   by\breaktitle
-   }%
-\def\@uthorpost{%
-   \monthword\ \the\year\breaktitle
-   }%
-\newif\ifs@gpage\s@gpagetrue
-\def\frontth@{%
-   \let\n@llch@pt\g@bble
-   \ifcopyright \copyrightpage \fi
-   \ifs@gpage\s@gpage\fi
-   \abstractsignedfalse\abspage
-   \ackpage
-   \contentspages
-   }%
-\def\endth@{}%
-%
-%  Macros for reports
-%
-\def\price#1{%
-   \gdef\pr@ce{#1}%
-   }\price{A08}%
-\def\reportstyle#1{%
-   \adddef\styler@p{#1}%
-   }%
-\def\styler@p{%
-   }%
-\def\report{%
-   \let\pred@c\prer@p\let\styled@c\styler@p\let\titd@c\titr@p
-   \let\frontd@c\frontr@p\let\endd@c\endr@p
-   }%
-\def\prer@p{}%
-\def\endr@p{}%
-\def\titr@p{%
-   {\normalbottom%\baselineskip 15pt
-      \specd@c\bigskip\bigskip
-      {\bf
-         \centertitle{%
-            \uppercase{\t@tle}%
-            \ifx\t@tlefoot\empty\else
-               \footnote{$^\ast$}{{\rm\t@tlefoot}}\fi
-            }%
-         }\bigskip
-      \centertitle{{\rm \@uthors}}\bigskip
-      \centertitle{{\rm \@nstitute}}\vfil
-      \centertitle{\monthword\ \the\year}\vfil
-      \ifx\c@ntract\empty\else{\rm\noindent\c@ntract}\bigskip\fi
-      \ifx\r@portprice\empty\else{\rm\noindent\r@portprice}\bigskip\fi
-      \supereject
-      }%
-   }%
-\def\frontr@p{%
-   \ifcopyright \copyrightpage \fi
-   \abstractsignedfalse\abspage
-   \ackpage
-   \contentspages
-   }%
-\def\endr@p{}%
diff --git a/macros/psizzl/symbols.psizzl b/macros/psizzl/symbols.psizzl
deleted file mode 100644
index ebac724b21..0000000000
--- a/macros/psizzl/symbols.psizzl
+++ /dev/null
@@ -1,59 +0,0 @@
-% SYMBOLS PSIZZL - symbol menu for TeX 1.0
-\let\itemTeX\item % make way for \item macro of Psizzl
-\font\fourteenss cmsy10 scaled\magstep{2}%
-%% use the following sub-set to print the circle R  as a
-%% superscript followed by a little space. (TM for Trade Mark.)
-\def\TM{$^{\Registered}$\kern.6em}%
-%
-\def\Registered{% circle R
-   {\ \unskip\hbox{\hbox{\mathhexbox20D}}%
-      \kern -1.85ex\
-      \unskip\hbox{\raise .07ex\hbox{$\scriptstyle R$}}%
-      }%
-   }%
-\def\assert{% assertion relation: kern ^ and - together
-   \mathrel{\mathpalette{\vert\mkern-8mu-}{}%
-      }%
-   }%
-\def\pslash{\not\kern-.20em p}%  p with a slash through it
-\def\qslash{\not\kern-.15em q}%
-\def\bra#1{\langle #1 \vert}%
-\def\ket#1{\vert #1\rangle}%
-\def\braket#1#2{\langle#1\vert#2\rangle}%
-\def\VEV#1{\langle #1\rangle}%
-\def\lsim{\buildrel\sim\over<}%
-\def\gsim{\buildrel\sim\over>}%
-\def\parder#1#2{%
-   {\partial #1 \over\partial #2}%
-   }%
-\def\parparder#1#2#3{%
-   {\partial^2#1\over\partial#2\partial#3}%
-   }%
-\let\tie=~%
-% the current date, with month in script
-\def\monthword{%
-   \ifcase\month% turn the month into a string
-   \or January\or   February\or March\or    April%
-   \or May\or       June\or     July\or     August%
-   \or September\or October\or  November\or December%
-   \fi
-   }%
-\def\ie{{\it i.e.}}%       id est
-\def\eg{{\it e.g.}}%       exempli gratia
-\def\nb{{\it NB}}%         nota bene
-\def\sic{[{\it sic}]\ }%      thus
-\def\vs{{\it vs}}%         versus
-\def\etc{{\it etc.}}%       et cetera
-\def\apriori{{\it a priori}}% a priori
-\def\perse{{\it per se}}%    per se
-\def\awk{{\sl [awkward]}}%    editorial comment
-\def\bothmodes#1#2{%
-   \def#1{\relax\ifmmode#2\else$#2$\fi}%
-   }%
-\bothmodes\\\backslash
-\bothmodes\bull\bullet
-\bothmodes\astr\ast
-\bothmodes\crcl\circ
-\bothmodes\micron{\mu m}%
-\bothmodes\{\lbrace
-\bothmodes\}\rbrace
diff --git a/macros/psizzl/thesis.psizzl b/macros/psizzl/thesis.psizzl
deleted file mode 100644
index 92cfd8512c..0000000000
--- a/macros/psizzl/thesis.psizzl
+++ /dev/null
@@ -1 +0,0 @@
-% THESIS PSIZZL - please use THESIS PSIZSAMP as a model for your thesis!