summaryrefslogtreecommitdiff
path: root/macros/latex/contrib/mwcls
diff options
context:
space:
mode:
authorNorbert Preining <norbert@preining.info>2019-09-02 13:46:59 +0900
committerNorbert Preining <norbert@preining.info>2019-09-02 13:46:59 +0900
commite0c6872cf40896c7be36b11dcc744620f10adf1d (patch)
tree60335e10d2f4354b0674ec22d7b53f0f8abee672 /macros/latex/contrib/mwcls
Initial commit
Diffstat (limited to 'macros/latex/contrib/mwcls')
-rw-r--r--macros/latex/contrib/mwcls/CZYTAJ35
-rw-r--r--macros/latex/contrib/mwcls/ChangeLog340
-rw-r--r--macros/latex/contrib/mwcls/README35
-rw-r--r--macros/latex/contrib/mwcls/mwcls.dtx4529
-rw-r--r--macros/latex/contrib/mwcls/mwcls.ins70
-rw-r--r--macros/latex/contrib/mwcls/mwclsdoc.pdfbin0 -> 155674 bytes
6 files changed, 5009 insertions, 0 deletions
diff --git a/macros/latex/contrib/mwcls/CZYTAJ b/macros/latex/contrib/mwcls/CZYTAJ
new file mode 100644
index 0000000000..4185397916
--- /dev/null
+++ b/macros/latex/contrib/mwcls/CZYTAJ
@@ -0,0 +1,35 @@
+------------------------------------------------------------------------
+
+Moje Własne KLaSy dokumentów dla LaTeXa 2e
+==========================================
+
+Copyright © 2000-2003, 2008-2009, 2017 by Marcin Woliński
+<wolinski@gust.org.pl>
+
+
+Pliki w tej paczce mogą być dystrybuowane i/lub modyfikowane na
+zasadach określonych w LaTeX Project Public License, wersja 1.2
+lub (wedle preferencji Użytkownika) dowolna późniejsza.
+Bieżąca wersja tej licencji jest dostępna pod adresem
+ http://www.latex-project.org/lppl.txt
+natomiast wersja 1.2 lub jakaś późniejsza jest częścią dystrybucji
+LaTeXa w wersji 1999/12/01 i wszystkich późniejszych.
+
+
+Aby zainstalować moje klasy należy wykonać polecenie
+
+ latex mwcls.ins
+
+a następnie przenieść wygenerowane pliki (mwart.cls, mwrep.cls,
+mwbk.cls, mw10.clo, mw11.clo, mw12.clo, mwbk10.clo, mwbk11.clo,
+mwbk12.clo) do jakiegoÅ› katalogu przeszukiwanego przez TeXa (w typowej
+instalacji np. ${TEXMF}/tex/latex/mwcls/, gdzie ${TEXMF} jest
+korzeniem drzewa zawierajÄ…cego pliki TeXowe). W typowych instalacjach
+trzeba też uaktualnić bazę danych o dostępnych plikach (zwykle
+polecenie texhash).
+
+
+Dokumentacja znajduje siÄ™ w pliku mwclsdoc.pdf.
+
+
+------------------------------------------------------------------------
diff --git a/macros/latex/contrib/mwcls/ChangeLog b/macros/latex/contrib/mwcls/ChangeLog
new file mode 100644
index 0000000000..c46b920cdc
--- /dev/null
+++ b/macros/latex/contrib/mwcls/ChangeLog
@@ -0,0 +1,340 @@
+2017-05-13 Marcin Woliñski <marcin@no-body>
+
+ * mwcls.dtx: Summary: Ulepszona wspó³praca z hyperref
+
+ -- linki ze spisu tre¶ci nie trafia³y, je¶li podpunkt zaczyna³ siê na
+ górze strony
+ -- hyperref nadpisywa³ ustawienia podpisów tabel i rysunków
+
+2009-09-27 Marcin Woliñski <marcin@no-body>
+
+ * mwcls.dtx:
+ Nazwy poleceñ \sectsetup, \titlesetup, \captionsetup, \figuresetup,
+ \tablesetup zosta³y zmienione na \...settings, ¿eby siê nie gryz³o z
+ caption.sty.
+
+2009-09-27 marcin@encek <marcin@encek>
+
+ * mwcls.dtx:
+ Nazwy poleceñ \sectsetup, \titlesetup, \captionsetup, \figuresetup,
+ \tablesetup zosta³y zmienione na \...settings, ¿eby siê nie gryz³o z
+ caption.sty.
+
+2009-09-02 marcin@encek <marcin@encek>
+
+ * mwcls.dtx: Odsy³acze do nienumerowanych sekcji w hyperrefie
+
+2009-08-30 Marcin Woliñski <marcin@pierwszy>
+
+ * mwcls.dtx:
+ Przesuniête ewentualne ³amanie strony przed \cs{refstepcounter},
+ którego hyperref u¿ywa do wstawienia odsy³acza. Dotychczasowa wersja
+ knoci³a odsy³acze do rozdzia³ów.
+ Podziêkowania dla Grzegorza Murzynowskiego za wczytanie siê w
+ hyperref.sty.
+
+ * mwcls.dtx:
+ b³±d ¿ywej paginy rozdzia³ów w~uk³adzie dwu³amowym wskazany przez
+ Micha³a Rudolfa
+
+2009-06-18 Marcin Woliñski <marcin@pierwszy>
+
+ * mwcls.dtx:
+ wykryty przez Marcina Borkowskiego b³±d zwi±zany z \clubpenalty
+
+2008-04-03 Marcin Woliñski <marcin@pierwszy>
+
+ * mwcls.dtx: poprawki dla kompatydebilno¶ci z natbibem
+
+2008-02-20 Marcin Woliñski <marcin@pierwszy>
+
+ * mwcls.dtx:
+ pierwsza poprawka dla XeTeXa: usuniête non-ASCII w komentarzu
+
+2004-09-26 Marcin Woliñski <marcin@pierwszy>
+
+ * mwcls.dtx: \HeadingNumber
+
+2003-10-21 Marcin Woliñski <marcin@pierwszy>
+
+ * mwcls.dtx: Z³a ¿ywa pagina w skorowidzu.
+
+2003-05-09 Marcin Woliñski <marcin@pierwszy>
+
+ * mwcls.dtx: Prosty bug w \maketitle.
+
+2003-05-09 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: Prosty bug w \maketitle.
+
+2003-04-25 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: \DeclareSectioningCommand --> \SetSectionFormatting
+ zmiana argumentów (nie trzeba podawaæ poziomu)
+
+2003-03-26 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: FormatRigidChapterHeading
+
+ * mwcls.dtx:
+ Dodana kropka po numerze w ¶rodowiskach definiowanych \newtheorem.
+
+ * mwcls.dtx: wiêcej znormalizowanych formatów papieru.
+
+2002-10-17 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: Poprzerabia³em spis tre¶ci: mechanizm zadawania wciêæ dla
+ poszczególnych poziomów (SetTOCIndents).
+
+2002-10-16 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx:
+ ¦rodowisko 'description' podlega tym samym prawom co 'itemize' i
+ 'enumerate': odstêp wokó³ tylko je¶li stanowi osobny akapit.
+
+ * mwcls.dtx: Ze wzglêdu na konflikt nazw z pakietem 'caption':
+ \sectfont -> \sectsetup
+ podobnie: \titlefont, \captionfont, \figurefont, \tablefont
+
+2002-05-12 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx:
+ W 'itemize' znowu jest u¿ywana pauza jako punktor (i chyba tak ju¿
+ zostanie).
+
+2002-05-08 wolinski <wolinski@Wincenty>
+
+ * mwcls.dtx: Kropka zamiast dwukropka w \caption.
+
+ * mwcls.dtx: Zmiana wersji licencji.
+
+2001-10-04 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: Poprawki w redefinicji \markright i \markboth.
+
+2001-08-08 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx:
+ Wiêcej miejsca na numery w spisie rysunków i tabel w klasach report i
+ book.
+
+2001-04-27 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: Dodany komunikat, ¿e beta. Reliza.
+
+2001-04-20 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: wolno dystrybuowaæ!????
+
+2001-03-30 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx:
+ Rozdzia³y wy³azi³y na lewy margines w spisie tre¶ci w klasie bk.
+
+2001-03-23 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx:
+ Dodany odstêp miêdzystrofowy (miêdzyakapitowy) w ¶rodowisku verse.
+
+2001-03-22 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx:
+ Opcje 'marginpar' i 'nomarginpar' przezwane 'withmarginpar' i
+ 'withoutmarginpar'. (By³ konflikt z pakietem geometry).
+
+ * mwcls.dtx: Zmiany w definicji \theindex.
+ Nie dzia³a³o \twocolumn[\chapter*{...}].
+ Teraz w przypadku bk i rep wywo³uje siê raz na pusto output routine.
+ Ale to chyba nie szkodzi.
+ W dwu³amowym art indeks nie wymusza pocz±tku strony (jest normalnym
+ \section).
+
+2001-03-13 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: Jednak bullet.
+
+2001-01-15 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx:
+ Zmiana formu³y obliczania \textheight: potrafi³o daæ za du¿o.
+
+2000-10-03 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: Poprawka poprzedniej poprawki: tym razem dzia³a?
+
+ * mwcls.dtx:
+ \thispagestyle{blank} na stronach zawieraj±cych nag³ówek z opcj±
+ `breakafter'.
+
+2000-08-08 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: \caption stopnia \small. \captionfont
+ floatssmall, floatsnormalsize.
+ \figurefont, \tablefont.
+
+2000-08-04 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: Dodana kropka po numerach w spisie tabel/rysunków.
+
+ * mwcls.dtx:
+ Nienumerowane pozycje w spisie tre¶ci cofniête to lewego brzegu
+ numerów innych punktów tego samego rzêdu (czy to dobry pomys³?).
+
+Thu Jun 1 14:19:32 2000 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx:
+ Brzydki bug: nadmiarowy odstêp miêdzy s±siaduj±cymi (sub)*sectionami.
+
+Thu May 18 10:15:23 2000 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: Drobiazgi. TOC w chor±giewkê.
+ (reliza)
+
+Wed Apr 26 10:31:03 2000 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: Nowe nazwy szablonów:
+ \FormatBlockHeading
+ \FormatHangHeading
+ \FormatChapterHeading
+ \FormatRunInHeading
+
+ * mwcls.dtx: \DeclareSectioningCommand[flags]{cmd name}{level}
+ {preskip}
+ {head}
+ {postskip}
+
+ Flags (comma separated):
+ runin - like \paragraph
+ breakbefore - forced page break before
+ breakafter - ditto after
+ wholewidth - spans both columns when in twocolumn
+
+ <postskip> is horizontal for run-in headings, vertical for others
+
+ In the <head> argument:
+ \ifHeadingNumbered - true iff heading has a number
+ \HeadingText - is the heading text
+ \HeadingRHeadText - text for running head
+ \HeadingTOCText - text for TOC
+
+Wed Apr 12 09:45:00 2000 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: toc-hook w \mw@section.
+
+Tue Apr 11 11:41:16 2000 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx:
+ TOC. Wciête pozycje nienumerowane. Dodane grzywny miêdzy pozycjami.
+
+ * mwcls.dtx:
+ Flagi okre¶laj±ce formatowanie tytulariów (nie dokoñczone). Dzia³a
+ indentfirst.
+
+Mon Apr 10 18:49:30 2000 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: Tymczasowa poprawka: dodatkowe \nobreak w tytulariach.
+
+Fri Apr 7 18:37:19 2000 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: Nazwy symboliczne w szablonach nag³ówków.
+
+Thu Apr 6 09:18:56 2000 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx:
+ Poprawione warunki w \...mark. Uwaga: teraz teksty \mark-ów rozwijane
+ s± wcze¶niej!
+
+Wed Apr 5 20:50:20 2000 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: \section[RHead][TOC]{Title}
+
+ * mwcls.dtx:
+ Typ kolumn bez paginacji nazywa siê teraz `blank' (poprzednio myl±co
+ `titlepage').
+
+ * mwcls.dtx:
+ Teraz \cleardoublepage produkuje pust± stronê _bez paginacji_ (LaTeX
+ bug).
+
+Thu Mar 30 17:10:49 2000 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: Bibliografia i skorowidz stopniem \secondarysize.
+
+ * mwcls.dtx:
+ Rozdzielone makra \sectfont i \titlefont. \sectfont okre¶la tak¿e
+ odmianê pisma.
+
+ * mwcls.dtx: Run-in headings (prototyp).
+
+Wed Mar 22 20:05:24 2000 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: globalne indentfirst (nie dziala!)
+
+ * mwcls.dtx: \part po mojemu.
+
+Tue Mar 21 09:22:21 2000 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: \chapter po mojemu.
+
+ * mwcls.dtx:
+ Zmienione bebechy tytulariów. \section, \subsection i \subsubsection
+ po nowemu.
+
+Sat Mar 11 13:47:46 2000 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: Kalafior: \def\secondarysize (by³o \let, co sprawia³o, ¿e
+ \secondarysize ,,nie zauwa¿a³o'' pó¼niejszego przedefiniowania
+ \small).
+
+ * mwcls.dtx:
+ Kalafior: spacja na pocz±tku argumentu \section pojawia siê na
+ wydruku.
+
+ * mwcls.dtx:
+ Kalafior: je¶li \familydefault<>\rmdefault, to domy¶lnie tytu³y sekcji
+ i tak z \rmdefault.
+
+Fri Dec 31 19:08:25 1999 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: Ró¿ne drobiazgi, \exhyphenpenalty=10000
+
+ Przerobiony sposób obliczania formatu kolumny, domy¶lnie bez
+ marginaliów, opcja `wide'.
+
+Thu Dec 9 19:53:17 1999 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: book: S³owo Rozdzia³ idzie do spisu tre¶ci.
+ report: W nag³ówkach rozdzia³ów nie ma s³owa Rozdzia³. (Dodatki
+ wygl±daj± g³upio. Co z tym zrobiæ?)
+
+Tue Dec 7 08:32:48 1999 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx:
+ Etykiety itemize i enumerate równane do lewej. Pauza na wszystkich
+ poziomach itemize (!?). Wciêcia nadal nieciekawe. Co z nimi zrobiæ?
+
+ ¦rodowiska enumerate* i itemize* (czy to ostatnie ma jaki¶ sens?).
+
+Sun Dec 5 20:13:57 1999 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx:
+ Odstêp wokó³ itemize i enumerate tylko je¶li wystêpuj± jako niezale¿ne
+ akapity.
+
+ * mwcls.dtx: \usepackage{color} vs. \pagestyle{uheadings}
+ Poprawione, ale do¶æ paskudne zapude³kowanie nag³ówka
+ (\hbox\hbox\vbox\hbox).
+
+Tue Nov 30 19:05:41 1999 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: Zawsze \flushbottom.
+
+Sun Nov 28 17:12:32 1999 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx:
+ Zmieniona strona tytu³owa, opcje authortitle i titleauthor.
+
+Sat Nov 27 18:19:18 1999 Marcin Wolinski <wolinski@mimuw.edu.pl>
+
+ * mwcls.dtx: Pierwsza reliza publiczna.
+
diff --git a/macros/latex/contrib/mwcls/README b/macros/latex/contrib/mwcls/README
new file mode 100644
index 0000000000..749943bbee
--- /dev/null
+++ b/macros/latex/contrib/mwcls/README
@@ -0,0 +1,35 @@
+------------------------------------------------------------------------
+
+My oWn document CLaSses for LaTeX 2e
+====================================
+
+Copyright © 2000-2003, 2008-2009, 2017 by Marcin Woliński
+<wolinski@gust.org.pl>
+
+
+Files in this bundle may be distributed and/or modified under the
+conditions of the LaTeX Project Public License, either version 1.2
+of this license or (at your option) any later version.
+The latest version of this license is in
+ http://www.latex-project.org/lppl.txt
+and version 1.2 or later is part of all distributions of LaTeX
+version 1999/12/01 or later.
+
+mwcls is a set of document classes for LaTeX 2e designed with Polish
+typographical tradition in mind. Classes include: 'mwart' (which is a
+replacement for 'article'), 'mwrep' ('report'), and 'mwbk' ('book').
+Most features present in standard classes work with mwcls. Some
+extensions/exceptions include: sectioning commands allow for second
+optional argument (it's possible to state different texts for running
+head and for TOC), new environments 'itemize*' and 'enumerate*' for
+lists with long items, page styles have variants for normal, opening,
+closing, and blank pages.
+
+Documentation is available as mwclsdoc.pdf (unfortunately in Polish
+only).
+
+To install run LaTeX like this
+ latex mwcls.ins
+and follow instructions on screen.
+
+------------------------------------------------------------------------
diff --git a/macros/latex/contrib/mwcls/mwcls.dtx b/macros/latex/contrib/mwcls/mwcls.dtx
new file mode 100644
index 0000000000..d5c451d3e6
--- /dev/null
+++ b/macros/latex/contrib/mwcls/mwcls.dtx
@@ -0,0 +1,4529 @@
+% \iffalse meta-comment -*- doctex -*-
+%
+% Copyright 2000-2003,2008-2009,2017 by Marcin Woli\'nski
+%
+%
+% This work may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.2
+% of this license or (at your option) any later version.
+% The latest version of this license is in
+% http://www.latex-project.org/lppl.txt
+% and version 1.2 or later is part of all distributions of LaTeX
+% version 1999/12/01 or later.
+%
+% \fi
+% \CheckSum{3809}
+%
+% \iffalse
+% \section{Identification}
+%
+% These document classes can only be used with \LaTeXe, so we make
+% sure that an appropriate message is displayed when another \TeX{}
+% format is used.
+% \begin{macrocode}
+%<article|report|book>\NeedsTeXFormat{LaTeX2e}[1995/12/01]
+% \end{macrocode}
+%
+% Announce the Class name and its version:
+% \begin{macrocode}
+%<article>\ProvidesClass{mwart}
+%<report>\ProvidesClass{mwrep}
+%<book>\ProvidesClass{mwbk}
+%<10pt&!bk>\ProvidesFile{mw10.clo}
+%<11pt&!bk>\ProvidesFile{mw11.clo}
+%<12pt&!bk>\ProvidesFile{mw12.clo}
+%<10pt&bk>\ProvidesFile{mwbk10.clo}
+%<11pt&bk>\ProvidesFile{mwbk11.clo}
+%<12pt&bk>\ProvidesFile{mwbk12.clo}
+%<*driver>
+\ProvidesFile{mwcls.drv}
+%</driver>
+ [2017/05/13 v0.75
+%<article|report|book> A LaTeX document class (MW)]
+%<10pt|11pt|12pt> A document class size option (MW)]
+%<article|report|book>\typeout{*** Beta version. Formatting may change}
+%<article|report|book>\typeout{*** in future versions of this class.}
+% \end{macrocode}
+%
+% \section{A driver for this document}
+%
+% The next bit of code contains the documentation driver file for
+% \TeX{}, i.e., the file that will produce the documentation you are
+% currently reading. It will be extracted from this file by the
+% {\sc docstrip} program.
+%
+% \begin{macrocode}
+%<*driver>
+]
+\documentclass[sfheadings]{mwart}
+\usepackage{doc}
+\usepackage{polski}
+\usepackage[utf8]{inputenc}
+\usepackage[hidelinks]{hyperref}
+% \end{macrocode}
+%
+% We don't want everything to appear in the index
+% \begin{macrocode}
+\DoNotIndex{\',\.,\@M,\@@input,\@Alph,\@alph,\@addtoreset,\@arabic}
+\DoNotIndex{\@badmath,\@centercr,\@cite}
+\DoNotIndex{\@dotsep,\@empty,\@float,\@gobble,\@gobbletwo,\@ignoretrue}
+\DoNotIndex{\@input,\@ixpt,\@m,\@minus,\@mkboth}
+\DoNotIndex{\@ne,\@nil,\@nomath,\@plus,\roman,\@set@topoint}
+\DoNotIndex{\@tempboxa,\@tempcnta,\@tempdima,\@tempdimb}
+\DoNotIndex{\@tempswafalse,\@tempswatrue,\@viipt,\@viiipt,\@vipt}
+\DoNotIndex{\@vpt,\@warning,\@xiipt,\@xipt,\@xivpt,\@xpt,\@xviipt}
+\DoNotIndex{\@xxpt,\@xxvpt,\\,\ ,\addpenalty,\addtolength,\addvspace}
+\DoNotIndex{\advance,\ast,\begin,\begingroup,\bfseries,\bgroup,\box}
+\DoNotIndex{\bullet}
+\DoNotIndex{\cdot,\cite,\CodelineIndex,\cr,\day,\DeclareOption}
+\DoNotIndex{\def,\DisableCrossrefs,\divide,\DocInput,\documentclass}
+\DoNotIndex{\DoNotIndex,\egroup,\ifdim,\else,\fi,\em,\endtrivlist}
+\DoNotIndex{\EnableCrossrefs,\end,\end@dblfloat,\end@float,\endgroup}
+\DoNotIndex{\endlist,\everycr,\everypar,\ExecuteOptions,\expandafter}
+\DoNotIndex{\fbox}
+\DoNotIndex{\filedate,\filename,\fileversion,\fontsize,\framebox,\gdef}
+\DoNotIndex{\global,\halign,\hangindent,\hbox,\hfil,\hfill,\hrule}
+\DoNotIndex{\hsize,\hskip,\hspace,\hss,\if@tempswa,\ifcase,\or,\fi,\fi}
+\DoNotIndex{\ifhmode,\ifvmode,\ifnum,\iftrue,\ifx,\fi,\fi,\fi,\fi,\fi}
+\DoNotIndex{\input}
+\DoNotIndex{\jobname,\kern,\leavevmode,\let,\leftmark}
+\DoNotIndex{\list,\llap,\long,\m@ne,\m@th,\mark,\markboth,\markright}
+\DoNotIndex{\month,\newcommand,\newcounter,\newenvironment}
+\DoNotIndex{\NeedsTeXFormat,\newdimen}
+\DoNotIndex{\newlength,\newpage,\nobreak,\noindent,\null,\number}
+\DoNotIndex{\numberline,\OldMakeindex,\OnlyDescription,\p@}
+\DoNotIndex{\pagestyle,\par,\paragraph,\paragraphmark,\parfillskip}
+\DoNotIndex{\penalty,\PrintChanges,\PrintIndex,\ProcessOptions}
+\DoNotIndex{\protect,\ProvidesClass,\raggedbottom,\raggedright}
+\DoNotIndex{\refstepcounter,\relax,\renewcommand}
+\DoNotIndex{\rightmargin,\rightmark,\rightskip,\rlap,\rmfamily}
+\DoNotIndex{\secdef,\selectfont,\setbox,\setcounter,\setlength}
+\DoNotIndex{\settowidth,\sfcode,\skip,\sloppy,\slshape,\space}
+\DoNotIndex{\symbol,\the,\trivlist,\typeout,\tw@,\undefined,\uppercase}
+\DoNotIndex{\usecounter,\usefont,\usepackage,\vfil,\vfill,\viiipt}
+\DoNotIndex{\viipt,\vipt,\vskip,\vspace}
+\DoNotIndex{\wd,\xiipt,\year,\z@}
+% \end{macrocode}
+% We do want an index, using linenumbers
+% \begin{macrocode}
+\EnableCrossrefs
+\CodelineIndex
+\RecordChanges
+% \end{macrocode}
+% We use so many \file{docstrip} modules that we set the
+% \texttt{StandardModuleDepth} counter to 1.
+% \begin{macrocode}
+\setcounter{StandardModuleDepth}{1}
+% \end{macrocode}
+% The following command retrieves the date and version information
+% from the file.
+% \begin{macrocode}
+\GetFileInfo{mwcls.drv}
+% \end{macrocode}
+% Some commonly used abbreviations
+% \changes{v1.2w}{1994/12/01}{Use \cs{newcommand*}}
+% \begin{macrocode}
+\newcommand*{\Lopt}[1]{\textsf {#1}}
+\newcommand*{\file}[1]{\texttt {#1}}
+\newcommand*{\Lcount}[1]{\textsl {\small#1}}
+\newcommand*{\pstyle}[1]{\textsl {#1}}
+\DeclareRobustCommand\cs[1]{\texttt{\char`\\#1}}
+\newcommand*\env{\texttt}
+% \end{macrocode}
+% We also want the full details.
+% \begin{macrocode}
+\begin{document}
+\MakeShortVerb{\|} \catcode`\^^A=14
+^^A inputenc makes ^^A active!!!??!!???
+\DocInput{mwcls.dtx}
+\PrintIndex
+\PrintChanges
+\end{document}
+%</driver>
+% \end{macrocode}
+%
+% \fi ^^A End of meta-comment.
+%
+%
+% \title{\texttt{mwcls.dtx}\\
+% \textbf{M}y O\textbf{w}n Document \textbf{Cl}a\textbf{s}ses
+% for \LaTeX{}\\
+% \textbf{M}oje \textbf{w}łasne \textbf{kl}a\textbf{s}y dokumentów}
+% \date{version/wersja \fileversion\ (\filedate)}
+% \author{\textbf{M}arcin \textbf{W}oliński}
+% \maketitle
+%
+% \textbf{METAUWAGA:} Ten plik jest dziełem w~trakcie powstawania.
+% Zacząłem od najświeższego pliku classes.dtx i stopniowo go
+% modyfikuję. Miejsca, które już odwiedziłem są znamienne pojawieniem
+% się fragmentów dokumentacji po polsku. [Koniec metauwagi]
+%
+% \tableofcontents
+%
+%
+% \StopEventually{} ^^A
+%
+%
+%
+% Niniejsze klasy powstały poprzez stopniową modyfikację standardowych
+% klas \LaTeX a. Ponieważ nigdy nie istniały dla \LaTeX a 2.09,
+% zacząłem od wyrzucenia wszystkich fragmentów zwązanych z~trybem
+% kompatybilności.
+%
+% Podobnie jak w~przypadku klas standardowych, właściwe pliki klas
+% (\texttt{mwart.cls}, \texttt{mwrep.cls}, \texttt{mwbk.cls},
+% \texttt{mw10.clo}, \texttt{mw11.clo} i~\texttt{mw12.clo}) sÄ…
+% generowane z~niniejszego dokumentu przy pomocy programu DOCSTRIP.
+% Pozwala to nie tylko opatrzyć program obfitymi komentarzami (nie,
+% żebym miał taki zamiar \texttt{:-)}), ale i~wygenerować powtarzające
+% się fragmenty definicji z~jednego źródła. Fragmenty te są
+% oznakowane dla DOCSTRIPa następującymi flagami:
+% \begin{center}
+% \begin{tabular}{ll}
+% article & klasa `artykuł'\\
+% report & klasa `raport'\\
+% book & klasa `książka'\\
+% size10 & kod obsługujący opcję \texttt{10pt}\\
+% size11 & kod obsługujący opcję \texttt{11pt}\\
+% size12 & kod obsługujący opcję \texttt{12pt}\\
+% bk10 & produce the book class option for 10pt\\
+% bk11 & produce the book class option for 11pt\\
+% bk12 & produce the book class option for 12pt\\
+% driver & kod pozwalający przetworzyć plik \texttt{mwcls.dtx} jako
+% dokument \LaTeX a\\
+% \end{tabular}
+% \end{center}
+%
+% \section{Initial Code}
+%
+% In this part we define a few commands that are used later on.
+%
+% \begin{macro}{\@ptsize}
+% To makro w klasach standardowych przechowuje drugÄ… cyfrÄ™
+% podstawowego stopnia pisma dokumentu. Autorzy \LaTeX a sądzą, że
+% istnieją pakiety, którym zależy na tej informacji. Dlatego też
+% (bez przekonania) zachowujemy to makro.
+% \begin{macrocode}
+%<*article|report|book>
+\newcommand\@ptsize{}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\if@restonecol}
+% To jest przełącznik wskazujący konieczność przywrócenia układu
+% dwułamowego (po jakiejś wstawce wymagającej jednego łamu).
+% \begin{macrocode}
+\newif\if@restonecol
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\if@titlepage}
+% A switch to indicate if a titlepage has to be produced. For the
+% article document class the default is not to make a separate
+% titlepage.
+% \begin{macrocode}
+\newif\if@titlepage
+%<article>\@titlepagefalse
+%<!article>\@titlepagetrue
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\if@openright}
+% A switch to indicate if chapters must start on a right-hand page.
+% The default for the report class is no; for the book class it's
+% yes.
+% \begin{macrocode}
+%<!article>\newif\if@openright
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\if@mainmatter}
+% Przełącznik |\if@mainmatter|, używany w~klasie book, wskazuje czy
+% jesteśmy w~głownej części książki.
+% \begin{macrocode}
+%<book>\newif\if@mainmatter \@mainmattertrue
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\ifHeadingNumbered}
+% Ten przełącznik służy do sygnalizowania, czy dany nagłówek ma być
+% poprzedzony numerem.
+% \begin{macrocode}
+\newif\ifHeadingNumbered
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\l@nohyphenation}
+% Tutaj upewniamy się, że jest zdefiniowany ,,język'' bez wzorców
+% przenoszenia. Taki ,,język'' jest bardzo użyteczny do lokalnego
+% wyłączania przenoszenia wyrazów.
+% \begin{macrocode}
+\ifx\l@nohyphenation\@undefined
+ \newlanguage\l@nohyphenation
+\fi
+% \end{macrocode}
+% \end{macro}
+%
+% \section{Opcje klasy}
+%
+%
+% \subsection*{Formaty papieru}
+%
+% [Przydało by się tu coś dodać]
+% The variables |\paperwidth| and |\paperheight| should reflect the
+% physical paper size after trimming. For desk printer output this
+% is usually the real paper size since there is no post-processing.
+% Classes for real book production will probably add other paper
+% sizes and additionally the production of crop marks for trimming.
+% \begin{macrocode}
+\DeclareOption{a4paper}
+ {\setlength\paperheight {297mm}%
+ \setlength\paperwidth {210mm}}
+\DeclareOption{a5paper}
+ {\setlength\paperheight {210mm}%
+ \setlength\paperwidth {148mm}}
+\DeclareOption{a6paper}
+ {\setlength\paperheight {148mm}%
+ \setlength\paperwidth {105mm}}
+\DeclareOption{b4paper}
+ {\setlength\paperheight {353mm}%
+ \setlength\paperwidth {250mm}}
+\DeclareOption{b5paper}
+ {\setlength\paperheight {250mm}%
+ \setlength\paperwidth {176mm}}
+\DeclareOption{b6paper}
+ {\setlength\paperheight {176mm}%
+ \setlength\paperwidth {125mm}}
+\DeclareOption{letterpaper}
+ {\setlength\paperheight {11in}%
+ \setlength\paperwidth {8.5in}}
+\DeclareOption{legalpaper}
+ {\setlength\paperheight {14in}%
+ \setlength\paperwidth {8.5in}}
+\DeclareOption{executivepaper}
+ {\setlength\paperheight {10.5in}%
+ \setlength\paperwidth {7.25in}}
+% \end{macrocode}
+%
+% The option \Lopt{landscape} switches the values of |\paperheight|
+% and |\paperwidth|, assuming the dimensions were given for portrait
+% paper.
+% \begin{macrocode}
+\DeclareOption{landscape}
+ {\setlength\@tempdima {\paperheight}%
+ \setlength\paperheight {\paperwidth}%
+ \setlength\paperwidth {\@tempdima}}
+% \end{macrocode}
+% Opcja \Lopt{wide} powoduje stosowanie minimalnych marginesów.
+% \begin{macrocode}
+\newif\if@wide
+\DeclareOption{wide}
+ {\@widetrue}
+% \end{macrocode}
+% Opcje \Lopt{withmarginpar} i~\Lopt{withoutmarginpar} decydujÄ…, czy
+% zostawiamy na stronie miejsce na marginalia.
+% \begin{macrocode}
+\newif\if@marginparsused
+\DeclareOption{withmarginpar}
+ {\@marginparsusedtrue}
+\DeclareOption{withoutmarginpar}
+ {\@marginparsusedfalse}
+% \end{macrocode}
+%
+% \subsection*{Wybór podstawowego stopnia pisma}
+%
+% \begin{macrocode}
+\newcommand\mw@usedd{\p@=1dd
+ \def\@vpt{5dd}%
+ \def\@vipt{6dd}%
+ \def\@viipt{7dd}%
+ \def\@viiipt{8dd}%
+ \def\@ixpt{9dd}%
+ \def\@xpt{10dd}%
+ \def\@xipt{11dd}%
+ \def\@xiipt{12dd}%
+ \def\@xivpt{14dd}%
+ \def\@xviipt{16dd}%
+ \def\@xxpt{18dd}%
+ \def\@xxvpt{24dd}%
+}
+\DeclareOption{10pt}{\renewcommand\@ptsize{0}\def\@basesize{10}}
+\DeclareOption{10dd}{\renewcommand\@ptsize{0}\def\@basesize{10}\@usedd}
+\DeclareOption{11pt}{\renewcommand\@ptsize{1}\def\@basesize{11}}
+\DeclareOption{12pt}{\renewcommand\@ptsize{2}\def\@basesize{12}}
+% \end{macrocode}
+%
+%
+% \subsection*{Two-side or one-side printing}
+%
+% For two-sided printing we use the switch |\if@twoside|. In
+% addition we have to set the |\if@mparswitch| to get any margin
+% paragraphs into the outside margin.
+% \begin{macrocode}
+\DeclareOption{oneside}{\@twosidefalse \@mparswitchfalse}
+\DeclareOption{twoside}{\@twosidetrue \@mparswitchtrue}
+% \end{macrocode}
+%
+%
+% \subsection*{Draft option}
+%
+% If the user requests \Lopt{draft} we show any overfull boxes.
+% We could probably add some more interesting stuff to this option.
+% \begin{macrocode}
+\DeclareOption{draft}{\setlength\overfullrule{5pt}}
+\DeclareOption{final}{\setlength\overfullrule{0pt}}
+% \end{macrocode}
+%
+% \subsection*{Titlepage option}
+% An article usually has no separate titlepage, but the user can
+% request one.
+% \begin{macrocode}
+\DeclareOption{titlepage}{\@titlepagetrue}
+\DeclareOption{notitlepage}{\@titlepagefalse}
+% \end{macrocode}
+%
+% \subsection*{openright option}
+% This option determines whether or not a chapter must start on
+% a right-hand page.
+% \begin{macrocode}
+%<book>\@openrighttrue
+%<!article>\DeclareOption{openright}{\@openrighttrue}
+%<!article>\DeclareOption{openany}{\@openrightfalse}
+% \end{macrocode}
+%
+% \subsection*{Twocolumn printing}
+%
+% Two-column and one-column printing is again realized via a switch.
+% \begin{macrocode}
+\DeclareOption{onecolumn}{\@twocolumnfalse}
+\DeclareOption{twocolumn}{\@twocolumntrue}
+% \end{macrocode}
+%
+% \subsection*{Equation numbering on the left}
+%
+% The option \Lopt{leqno} can be used to get the equation numbers
+% on the left side of the equation. It loads code which is generated
+% automatically from the kernel files when the format is built.
+% If the equation number does get a special formatting then instead
+% of using the kernel file the class would need to provide the code
+% explicitly.
+% \begin{macrocode}
+\DeclareOption{leqno}{\input{leqno.clo}}
+% \end{macrocode}
+%
+% \subsection*{Flush left displays}
+%
+% The option \Lopt{fleqn} redefines the displayed math environments
+% in such a way that they come out flush left, with an indentation
+% of |\mathindent| from the prevailing left margin. It loads
+% code which is generated
+% automatically from the kernel files when the format is built.
+% \begin{macrocode}
+\DeclareOption{fleqn}{\input{fleqn.clo}}
+% \end{macrocode}
+%
+% \subsection*{Open bibliography}
+%
+% The option \Lopt{openbib} produces the ``open'' bibliography
+% style, in which each block starts on a new line, and succeeding
+% lines in a block are indented by |\bibindent|.
+% \begin{macrocode}
+\DeclareOption{openbib}{%
+% \end{macrocode}
+% First some hook into the bibliography environment is filled.
+% \begin{macrocode}
+ \AtEndOfPackage{%
+ \renewcommand\@openbib@code{%
+ \advance\leftmargin\bibindent
+ \itemindent -\bibindent
+ \listparindent \itemindent
+ \parsep \z@
+ }%
+% \end{macrocode}
+% In addition the definition of |\newblock| is overwritten.
+% \begin{macrocode}
+ \renewcommand\newblock{\par}}%
+}
+% \end{macrocode}
+%
+% \subsection*{Krój pisma tytulariów}
+% Następne opcje służą do wyboru kroju (rodziny fontów), którym
+% składane będą nagłówki rozdziałów.
+% \changes{0.74}{2009/09/27}{Zmiana nazw poleceń \cs{...setup} na
+% \cs{...settings} dla kompatydebilności z caption.sty}
+% \begin{macrocode}
+\newcommand*\sectsettings{\bfseries}
+\newcommand*\titlesettings{}
+\DeclareOption{rmheadings}{%
+ \def\sectsettings{\rmfamily\bfseries}%
+ \def\titlesettings{\rmfamily}%
+ }
+\DeclareOption{sfheadings}{%
+ \def\sectsettings{\sffamily\bfseries}%
+ \def\titlesettings{\sffamily}%
+ }
+% \end{macrocode}
+%
+% \subsection*{Stopień pisma w~środowiskach przemieszczalnych}
+%
+% \begin{macrocode}
+\newcommand*\captionsettings{\small}
+\DeclareOption{floatssmall}{%
+ \def\figuresettings{\small}%
+ \def\tablesettings{\small}%
+ }
+\DeclareOption{floatsnormalsize}{%
+ \def\figuresettings{\normalsize}%
+ \def\tablesettings{\normalsize}%
+ }
+% \end{macrocode}
+%
+%
+% \subsection*{Kolejność informacji w tytule}
+% Te opcje sterują kolejnością umieszczenia na karcie tytułowej
+% autora i tytułu publikacji.
+% \begin{macrocode}
+\newif\if@authorfirst
+\DeclareOption{authortitle}{\@authorfirsttrue}
+\DeclareOption{titleauthor}{\@authorfirstfalse}
+% \end{macrocode}
+%
+% \subsection*{Wciecia po tytułach}
+% \begin{macrocode}
+\DeclareOption{indentfirst}{\@afterindenttrue}
+\DeclareOption{noindentfirst}{\@afterindentfalse}
+% \end{macrocode}
+%
+% \subsection*{Opcje domyślne}
+%
+% Dla wszystkich klas domyślny jest skład jednołamowy pismem
+% 10-punktowym na papierze formatu A4. Dla książki domyślny jest
+% druk dwustronny.
+% \begin{macrocode}
+%<*article>
+\ExecuteOptions{a4paper,10pt,oneside,onecolumn,%
+ final,authortitle,withoutmarginpar,indentfirst,floatsnormalsize}
+%</article>
+%<*report>
+\ExecuteOptions{a4paper,10pt,oneside,onecolumn,%
+ final,openany,authortitle,withoutmarginpar,indentfirst,floatsnormalsize}
+%</report>
+%<*book>
+\ExecuteOptions{a4paper,10pt,twoside,onecolumn,%
+ final,openright,authortitle,withoutmarginpar,indentfirst,floatsnormalsize}
+%</book>
+% \end{macrocode}
+%
+% \begin{macrocode}
+\ProcessOptions
+% \end{macrocode}
+% Now that all the options have been executed we can load the
+% chosen class option file that contains all size dependent code.
+% \begin{macrocode}
+%<!book>\input{mw\@basesize.clo}
+%<book>\input{mwbk\@basesize.clo}
+%</article|report|book>
+% \end{macrocode}
+%
+% \section{Przeróbki w~kernelu \LaTeX a}
+%
+% \begin{macro}{\markboth}
+% Dla naszych celów konieczne jest aby w~makrze \cs{@themark}
+% przechowywana była rozwinięta postać argumentów (chcemy bowiem
+% pewne wartości wprowadzać przez chwilowo definiowane nazwy
+% symboliczne). Nie narusza to kompatybilności, bo argumenty i~tak były
+% rozwijane w~momencie wykonania \cs{mark}a.
+%
+% W~jądrze \LaTeX a z~datą 2000/06/01 nastąpiły pożądane przez nas
+% zmiany. Można by więc wyrzucić nasze definicje. Aby jednak
+% umożliwić używanie zarówno starszego formatu jak i~nowego
+% zapożyczamy definicje z~nowego kernela. (Wyrzucimy je za rok).
+% \changes{v0.52}{2001/10/04}{Definicje markright/both pobrane
+% z~nowego kernela}
+% \begin{macrocode}
+%<*article|report|book>
+\def\markboth#1#2{%
+ \begingroup
+ \let\label\relax \let\index\relax \let\glossary\relax
+ \unrestored@protected@xdef\@themark {{#1}{#2}}%
+ \@temptokena \expandafter{\@themark}%
+ \mark{\the\@temptokena}%
+ \endgroup
+ \if@nobreak\ifvmode\nobreak\fi\fi}
+\def\markright#1{%
+ \begingroup
+ \let\label\relax \let\index\relax \let\glossary\relax
+ \expandafter\@markright\@themark {#1}%
+ \@temptokena \expandafter{\@themark}%
+ \mark{\the\@temptokena}%
+ \endgroup
+ \if@nobreak\ifvmode\nobreak\fi\fi}
+\def\@markright#1#2#3{\@temptokena {#1}%
+ \unrestored@protected@xdef\@themark{{\the\@temptokena}{#3}}}
+% \def\markboth#1#2{{%
+% \let\protect\@unexpandable@protect
+% \let\label\relax \let\index\relax \let\glossary\relax
+% \xdef\@themark{{#1}{#2}}%
+% \mark{\@themark}}\if@nobreak\ifvmode\nobreak\fi\fi}
+% \def\markright#1{{\let\protect\@unexpandable@protect
+% \let\label\relax \let\index\relax \let\glossary\relax
+% \expandafter\@markright\@themark
+% {#1}\mark{\@themark}}\if@nobreak\ifvmode\nobreak\fi\fi}
+% \def\@markright#1#2#3{\xdef\@themark{{#1}{#3}}}
+%</article|report|book>
+% \end{macrocode}
+% \end{macro}
+%
+% \section{Projekt typograficzny dokumentu}
+% \label{sec:maincode}
+%
+% In this section we are finally dealing with the nasty typographical
+% details.
+%
+% \subsection{Stopnie pisma}
+%
+% \LaTeX\ offers the user commands to change the size of the font,
+% relative to the `main' size. Each relative size changing command
+% |\size| executes the command
+% |\@setfontsize||\size|\meta{font-size}\meta{baselineskip} where:
+%
+% \begin{description}
+% \item[\meta{font-size}] The absolute size of the font to use from
+% now on.
+%
+% \item[\meta{baselineskip}] The normal value of |\baselineskip|
+% for the size of the font selected. (The actual value will be
+% |\baselinestretch| * \meta{baselineskip}.)
+% \end{description}
+%
+% A number of commands, defined in the \LaTeX{} kernel, shorten the
+% following definitions and are used throughout. They are:
+% \begin{center}
+% \begin{tabular}{ll@{\qquad}ll@{\qquad}ll}
+% \verb=\@vpt= & 5 & \verb=\@vipt= & 6 & \verb=\@viipt= & 7 \\
+% \verb=\@viiipt= & 8 & \verb=\@ixpt= & 9 & \verb=\@xpt= & 10 \\
+% \verb=\@xipt= & 10.95 & \verb=\@xiipt= & 12 & \verb=\@xivpt= & 14.4\\
+% ...
+% \end{tabular}
+% \end{center}
+%
+% \begin{macro}{\normalsize}
+% \begin{macro}{\@normalsize}
+% The user level command for the main size is |\normalsize|.
+% Internally \LaTeX{} uses |\@normalsize| when it refers to the
+% main size. |\@normalsize| will be defined to work like
+% |\normalsize| if the latter is redefined from its default
+% definition (that just issues an error message). Otherwise
+% |\@normalsize| simply selects a 10pt/12pt size.
+%
+% The |\normalsize| macro also sets new values for\\
+% |\abovedisplayskip|, |\abovedisplayshortskip| and
+% |\belowdisplayshortskip|.
+%
+% \begin{macrocode}
+%<*10pt|11pt|12pt>
+\renewcommand\normalsize{%
+%<*10pt>
+ \@setfontsize\normalsize\@xpt\@xiipt
+ \abovedisplayskip 10\p@ \@plus2\p@ \@minus5\p@
+ \abovedisplayshortskip \z@ \@plus3\p@
+ \belowdisplayshortskip 6\p@ \@plus3\p@ \@minus3\p@
+%</10pt>
+%<*11pt>
+ \@setfontsize\normalsize\@xipt{13.6}%
+ \abovedisplayskip 11\p@ \@plus3\p@ \@minus6\p@
+ \abovedisplayshortskip \z@ \@plus3\p@
+ \belowdisplayshortskip 6.5\p@ \@plus3.5\p@ \@minus3\p@
+%</11pt>
+%<*12pt>
+ \@setfontsize\normalsize\@xiipt{14.5}%
+ \abovedisplayskip 12\p@ \@plus3\p@ \@minus7\p@
+ \abovedisplayshortskip \z@ \@plus3\p@
+ \belowdisplayshortskip 6.5\p@ \@plus3.5\p@ \@minus3\p@
+%</12pt>
+% \end{macrocode}
+% The |\belowdisplayskip| is always equal to the
+% |\abovedisplayskip|.
+% \begin{macrocode}
+ \belowdisplayskip \abovedisplayskip
+ }
+% \end{macrocode}
+%
+% Teraz wywołamy właśnie zdefiniowane polecenie \cs{normalsize},
+% aby móc się dalej odwoływać do wartości rejestru
+% \cs{baselineskip}, oraz by jednostka \texttt{em} uzyskała
+% właściwą interpretację.
+% \begin{macrocode}
+\normalsize
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\small}
+% This is similar to |\normalsize|.
+% \begin{macrocode}
+\newcommand\small{%
+%<*10pt>
+ \@setfontsize\small\@ixpt{11}%
+ \abovedisplayskip 8.5\p@ \@plus3\p@ \@minus4\p@
+ \abovedisplayshortskip \z@ \@plus2\p@
+ \belowdisplayshortskip 4\p@ \@plus2\p@ \@minus2\p@
+%</10pt>
+%<*11pt>
+ \@setfontsize\small\@xpt\@xiipt
+ \abovedisplayskip 10\p@ \@plus2\p@ \@minus5\p@
+ \abovedisplayshortskip \z@ \@plus3\p@
+ \belowdisplayshortskip 6\p@ \@plus3\p@ \@minus3\p@
+%</11pt>
+%<*12pt>
+ \@setfontsize\small\@xipt{13.6}%
+ \abovedisplayskip 11\p@ \@plus3\p@ \@minus6\p@
+ \abovedisplayshortskip \z@ \@plus3\p@
+ \belowdisplayshortskip 6.5\p@ \@plus3.5\p@ \@minus3\p@
+%</12pt>
+ \belowdisplayskip \abovedisplayskip
+}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\footnotesize}
+% This is similar to |\normalsize|.
+% \begin{macrocode}
+\newcommand\footnotesize{%
+%<*10pt>
+ \@setfontsize\footnotesize\@viiipt{9.5}%
+ \abovedisplayskip 6\p@ \@plus2\p@ \@minus4\p@
+ \abovedisplayshortskip \z@ \@plus\p@
+ \belowdisplayshortskip 3\p@ \@plus\p@ \@minus2\p@
+%</10pt>
+%<*11pt>
+ \@setfontsize\footnotesize\@ixpt{11}%
+ \abovedisplayskip 8\p@ \@plus2\p@ \@minus4\p@
+ \abovedisplayshortskip \z@ \@plus\p@
+ \belowdisplayshortskip 4\p@ \@plus2\p@ \@minus2\p@
+%</11pt>
+%<*12pt>
+ \@setfontsize\footnotesize\@xpt\@xiipt
+ \abovedisplayskip 10\p@ \@plus2\p@ \@minus5\p@
+ \abovedisplayshortskip \z@ \@plus3\p@
+ \belowdisplayshortskip 6\p@ \@plus3\p@ \@minus3\p@
+%</12pt>
+ \belowdisplayskip \abovedisplayskip
+}
+%</10pt|11pt|12pt>
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\scriptsize}
+% \begin{macro}{\tiny}
+% \begin{macro}{\large}
+% \begin{macro}{\Large}
+% \begin{macro}{\LARGE}
+% \begin{macro}{\huge}
+% \begin{macro}{\Huge}
+% These are all much simpler than the previous macros, they just
+% select a new fontsize, but leave the parameters for displays and
+% lists alone.
+% \begin{macrocode}
+%<*10pt>
+\newcommand\scriptsize{\@setfontsize\scriptsize\@viipt\@viiipt}
+\newcommand\tiny{\@setfontsize\tiny\@vpt\@vipt}
+\newcommand\large{\@setfontsize\large\@xiipt{14}}
+\newcommand\Large{\@setfontsize\Large\@xivpt{18}}
+\newcommand\LARGE{\@setfontsize\LARGE\@xviipt{22}}
+\newcommand\huge{\@setfontsize\huge\@xxpt{25}}
+\newcommand\Huge{\@setfontsize\Huge\@xxvpt{30}}
+%</10pt>
+%<*11pt>
+\newcommand\scriptsize{\@setfontsize\scriptsize\@viiipt{9.5}}
+\newcommand\tiny{\@setfontsize\tiny\@vipt\@viipt}
+\newcommand\large{\@setfontsize\large\@xiipt{14}}
+\newcommand\Large{\@setfontsize\Large\@xivpt{18}}
+\newcommand\LARGE{\@setfontsize\LARGE\@xviipt{22}}
+\newcommand\huge{\@setfontsize\huge\@xxpt{25}}
+\newcommand\Huge{\@setfontsize\Huge\@xxvpt{30}}
+%</11pt>
+%<*12pt>
+\newcommand\scriptsize{\@setfontsize\scriptsize\@viiipt{9.5}}
+\newcommand\tiny{\@setfontsize\tiny\@vipt\@viipt}
+\newcommand\large{\@setfontsize\large\@xivpt{18}}
+\newcommand\Large{\@setfontsize\Large\@xviipt{22}}
+\newcommand\LARGE{\@setfontsize\LARGE\@xxpt{25}}
+\newcommand\huge{\@setfontsize\huge\@xxvpt{30}}
+\let\Huge=\huge
+%</12pt>
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+%
+% \begin{macro}{\secondarysize}
+% Wedle polskich zwyczajów nie tylko przypisy (notki) ale i
+% wszystkie poboczne części tekstu jak bibliografia, spisy treści,
+% tabel, rysunków, skorowidz itp. są składane pismem o jeden lub
+% dwa stopnie mniejszym od podstwowego. Ten stopień pisma włącza
+% polecenie \cs{secondarysize}. Domyślnie ustawiamy je na jeden
+% stopień mniejsze.
+% \begin{macrocode}
+\def\secondarysize{\small}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Parametry akapitów}
+%
+% \begin{macro}{\lineskip}
+% \begin{macro}{\normallineskip}
+% Wartości \cs{lineskip} i \cs{lineskiplimit} ustawiamy jak zwykle:
+% \begin{macrocode}
+%<*article|report|book>
+\setlength\lineskip{1\p@}
+\setlength\normallineskip{1\p@}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\baselinestretch}
+% Makro \cs{baselinestretch} służy jako mnożnik \cs{baselineskip}
+% do uzyskiwania ,,podwójnego odstępu''. Domyślnie jest puste.
+% \begin{macrocode}
+\renewcommand\baselinestretch{}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\parskip}
+% \begin{macro}{\parindent}
+% W naszych klasach stosujemy klasyczny układ akapitów z~wcięciem
+% pierwszego wiersza i bez odstępów między akapitami. Zgodnie
+% z~polskimi zaleceniami wcięcie akapitowe powinno wynosić 1 do 1,5
+% fireta. Zatem w~układzie dwułamowym stosujemy 1em, w
+% jednołamowym 1,5em wcięcia (być może lepiej byłoby uzależnić
+% wcięcie bezpośrednio od szerokości łamu).
+% \begin{macrocode}
+\setlength\parskip{\z@}
+\if@twocolumn
+ \setlength\parindent{1em}
+\else
+ \setlength\parindent{1.5em}
+\fi
+\newdimen\@parindent
+%%\parindent32pt % wartość testowa. Wyrzucic!
+\@parindent\parindent
+%</article|report|book>
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\smallskipamount}
+% \begin{macro}{\medskipamount}
+% \begin{macro}{\bigskipamount}
+% Te wartości ustawiamy odpowiednio na ćwierć, pół i całą
+% podstawową interlinię (zatem wartość zależy od podstawowego
+% stopnia pisma dokumentu).
+% \begin{macrocode}
+%<*10pt|11pt|12pt>
+\setlength\smallskipamount{.25\baselineskip \@plus.125\baselineskip
+ \@minus.0625\baselineskip}
+\setlength\medskipamount{.5\baselineskip \@plus.25\baselineskip
+ \@minus.125\baselineskip}
+\setlength\bigskipamount{1\baselineskip \@plus.5\baselineskip
+ \@minus.25\baselineskip}
+%</10pt|11pt|12pt>
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\@lowpenalty}
+% \begin{macro}{\@medpenalty}
+% \begin{macro}{\@highpenalty}%
+% The commands |\nopagebreak| and |\nolinebreak| put in penalties
+% to discourage these breaks at the point they are put in.
+% They use |\@lowpenalty|, |\@medpenalty| or |\@highpenalty|,
+% dependent on their argument.
+% \begin{macrocode}
+%<*article|report|book>
+\@lowpenalty 51
+\@medpenalty 151
+\@highpenalty 301
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\hyphenpenalty}
+% \begin{macro}{\exhyphenpenalty}
+% Wartość \cs{hyphenpenalty} ustawiamy na 100 --- nieco więcej niż
+% w~klasach standardowych. Natomiast \cs{exhyphenpenalty} na
+% 10000. Uzasadnienie tej ostatniej wartości jest takie:
+% łamanie wiersza na dywizie wymaga powtórzenia go na początku
+% następnego wiersza. Takiego zachowania nie da się w~sensowny
+% sposób uzyskać przy pomocy znaku \texttt{-}. Dlatego blokujemy
+% łamanie na takim dywizie, jak również na myślniku --- po polsku
+% myślnik ma po sobie łamliwą spację.
+% \begin{macrocode}
+\hyphenpenalty=100
+\exhyphenpenalty=10000
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \begin{macro}{\clubpenalty}
+% \begin{macro}{\widowpenalty}
+% Bękarty są wedle polskich zwyczajów błędem składu. Dlatego
+% stosujemy wartość \cs{widowpenalty} zabraniającą takiego łamania
+% strony. Szewce formalnie nie są błędem, ale też staramy się ich
+% unikać.
+% \begin{macrocode}
+\widowpenalty 10000
+\clubpenalty 5000
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\displaywidowpenalty}
+% \begin{macro}{\predisplaypenalty}
+% \begin{macro}{\postdisplaypenalty}
+% Discourage (but not so much) widows in front of a math display
+% and forbid breaking directly in front of a display. Allow break
+% after a display without a penalty.
+% \begin{macrocode}
+ \displaywidowpenalty 5000
+% \predisplaypenalty 10000
+% \postdisplaypenalty 0
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\interlinepenalty}
+% Nie stosujemy dodatkowych grzywien pomiędzy zwykłymi liniami
+% akapitu.
+% \begin{macrocode}
+% \interlinepenalty 0
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\brokenpenalty}
+% We allow the breaking of a page after a hyphenated line.
+% \begin{macrocode}
+% \brokenpenalty 100
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Różne drobiazgi}
+%
+% \begin{macro}{\@fnsymbol}
+% Znaki produkowane przez liczniki w~stylu \texttt{fnsymbol} nikomu
+% w~Polsce nie kojarzą się z~niczym (prócz śmierci). Dlatego
+% zamieniamy je
+% na jedną, dwie i trzy gwiazdki (zatem w~tym stylu można liczyć do
+% trzech!).
+% \begin{macrocode}
+\def\@fnsymbol#1{\ensuremath{\ifcase#1\or *\or **\or *{*}*
+ \else\@ctrerr\fi}}
+%</article|report|book>
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Układ strony}
+%
+% \subsubsection{Wymiary pionowe}
+%
+% \begin{macro}{\headheight}
+% \begin{macro}{\headsep}
+% \begin{macro}{\topskip}
+% Wartość \cs{headheight} --- wysokość paska przeznaczonego na
+% główkę strony --- ustalamy na jeden wiersz tekstu. Między główką
+% i łamem stosujemy jeden wiersz odstępu (!!!mało?). \cs{topskip}
+% tradycyjnie ustawiamy równy stopniowi pisma.
+% \begin{macrocode}
+%<*10pt|11pt|12pt>
+\setlength\headheight{\baselineskip}
+\setlength\headsep{\baselineskip}
+\addtolength\headsep{2pt}
+\setlength\topskip{\@basesize\p@}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\footskip}
+% Wartość \cs{footskip} określa odległość linii bazowej stopki
+% strony od dołu łamu. Rozmiar ten ma zatem zmieścić w~sobie
+% wysokość stopki i światło. Ustawiamy ją na podwojoną wartość
+% interlinii.
+% \begin{macrocode}
+\setlength\footskip{2\baselineskip}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\maxdepth}
+% The \TeX\ primitive register |\maxdepth| has a function that is
+% similar to that of |\topskip|. The register |\@maxdepth| should
+% always contain a copy of |\maxdepth|. This is achieved by setting
+% it internally at |\begin{document}|. In both plain \TeX\ and
+% \LaTeX~2.09 |\maxdepth| had a fixed value of \texttt{4pt}; in
+% native \LaTeX2e\ mode we let the value depend on the typesize. We
+% set it so that |\maxdepth| $+$ |\topskip| $=$ typesize $\times
+% 1.5$. As it happens, in these classes |\topskip| is equal to the
+% typesize, therefore we set |\maxdepth| to half the value of
+% |\topskip|.
+% \begin{macrocode}
+\setlength\maxdepth{.5\topskip}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsubsection{Wymiary poziome}
+%
+% \begin{macro}{\marginparwidth}
+%
+% \begin{macrocode}
+\if@marginparsused
+\setlength\marginparsep{1cc}
+\setlength\marginparwidth{4cc}
+\setlength\marginparpush{.5\baselineskip}
+\else
+\setlength\marginparsep{0cc}
+\setlength\marginparwidth{0cc}
+\def\marginpar{\ClassError{mwcls}{Marginpars are disabled by
+ default in this class.\MessageBreak Use `withmarginpar'
+ option to enable}{}\global\let\marginpar\@gobble}
+\fi
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\columnsep}
+% This gives the distance between two columns in two column mode.
+% \begin{macrocode}
+\setlength\columnsep{2cc}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\columnseprule}
+% This gives the width of the rule between two columns in two
+% column mode. We have no visible rule.
+% \begin{macrocode}
+\setlength\columnseprule{0\p@}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsubsection{Rozmiary kolumny}
+% \begin{macro}{\textwidth}
+% Szerokość kolumny wyznaczamy w~następujący pokrętny sposób.
+% Najpierw obliczamy ile miejsca pozostaje po pomniejszeniu
+% szerokości papieru o~minimalne marginesy (2cm) i~ewentualną
+% przestrzeń na marginalia.
+% \begin{macrocode}
+ \setlength\@tempdima{\paperwidth}
+ \addtolength\@tempdima{-4cm}
+ \addtolength\@tempdima{-\marginparsep}
+ \addtolength\@tempdima{-\marginparwidth}
+% \end{macrocode}
+% Następnie w~rejestrze \cs{@tempdimb} umieszczamy największą
+% szerokość łamu dopuszczalną ze względu na czytelność
+% (zapożyczyliśmy te wartości z~klas standardowych --- być może są
+% one zbyt małe).
+% \begin{macrocode}
+%<10pt> \setlength\@tempdimb{345\p@}
+%<11pt> \setlength\@tempdimb{360\p@}
+%<12pt> \setlength\@tempdimb{390\p@}
+% \end{macrocode}
+% Następnie uwzględniamy, że powyższy limit w~układzie dwułamowym
+% powinien dotyczyć pojedynczego łamu.
+% \begin{macrocode}
+\if@twocolumn
+ \addtolength\@tempdimb{\@tempdimb}
+ \addtolength\@tempdimb{\columnsep}
+\fi
+% \end{macrocode}
+% Teraz możemy wreszcie ustalić szerokość kolumny. Przy obecności
+% opcji \Lopt{wide} ustalamy jÄ… na maksymalnÄ… dopuszczalnÄ…
+% wielkość, czyli \cs{@tempdima}. Bez tej opcji --- na mniejszą
+% z~wartości \cs{@tempdima} i~\cs{@tempdimb}.
+% \begin{macrocode}
+\if@wide
+ \setlength\textwidth{\@tempdima}
+\else
+ \ifdim\@tempdima>\@tempdimb
+ \setlength\textwidth{\@tempdimb}
+ \else
+ \setlength\textwidth{\@tempdima}
+ \fi
+\fi
+% \end{macrocode}
+%
+% Here we modify the width of the text a little to be a whole
+% number of points. (Po co to???)
+% \begin{macrocode}
+ \@settopoint\textwidth
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\textheight}
+% Teraz wyznaczymy wysokość kolumny. W~tym celu wysokość strony
+% zmniejszamy o~4cm na marginesy i~o~wysokość główki strony
+% (zakładamy, że stopka zawiera co najwyżej paginę zwykłą, która
+% nie wlicza się do wysokości kolumny).
+% \begin{macrocode}
+ \setlength\@tempdima{\paperheight}
+ \addtolength\@tempdima{-4cm}
+ \addtolength\@tempdima{-\headheight}
+ \addtolength\@tempdima{-\headsep}
+% \addtolength\@tempdima{-\footskip}
+% \end{macrocode}
+% Teraz zechcemy wyznaczyć, jaka liczba pełnych wierszy tekstu
+% zmieści się na stronie (w~zaokrągleniu).
+% \begin{macrocode}
+ \advance\@tempdima-.5\baselineskip
+ \divide\@tempdima\baselineskip
+ \@tempcnta=\@tempdima
+% \end{macrocode}
+% Na tej podstawie wyznaczamy \cs{textheight}, dodajÄ…c \cs{topskip}
+% dla pierwszej linii, którą obcięliśmy w~zaokrągleniu powyżej.
+% \begin{macrocode}
+ \setlength\textheight{\@tempcnta\baselineskip}
+ \addtolength\textheight{\topskip}
+% \end{macrocode}
+% \end{macro}
+%
+%
+% \subsubsection{Marginesy}
+%
+% Marginesy obliczamy na podstawie wartości wyznaczonych
+% uprzednio.
+%
+% \begin{macro}{\oddsidemargin}
+% \begin{macro}{\evensidemargin}
+% Szerokość strony pomniejszamy o~szerokość kolumny, szerokość łamu
+% na marginalia i~odstęp od łamu głównego. Wynik rozdzielamy równo
+% na lewy i~prawy margines.
+% \begin{macrocode}
+\setlength\@tempdima{\paperwidth}
+\addtolength\@tempdima{-\textwidth}
+\addtolength\@tempdima{-\marginparwidth}
+\addtolength\@tempdima{-\marginparsep}
+\divide\@tempdima by2
+% \end{macrocode}
+% Przy druku jednostronnym centrujemy kolumnę (prawy margines równy
+% lewemu). Przy druku dwustronnym stosujemy proporcję wewnętrznego
+% marginesu do zewnętrznego jak 2:3 (czy to ,,ładna'' wartość?).
+% \begin{macrocode}
+\setlength\oddsidemargin{\@tempdima}
+\setlength\evensidemargin{\@tempdima}
+\if@twoside
+ \addtolength\oddsidemargin{-.1\@tempdima}
+ \addtolength\evensidemargin{.1\@tempdima}
+\fi
+% \end{macrocode}
+% Wreszcie zmniejszamy obliczone marginesy o~1~cal, ponieważ dla
+% \TeX a strona zaczyna się o~cal w~prawo w~dół.
+% \begin{macrocode}
+ \addtolength\oddsidemargin{-1in}
+ \addtolength\evensidemargin{-1in}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\topmargin}
+% Margines górny obliczamy tak, aby kolumnę wraz z~miejscem na
+% główkę i~stopkę
+% scentrować na stronie. Jest to chyba najlepsze, co możemy zrobić
+% nie wiedząc nic o~obecności główki i~stopki. Dla żywej paginy na
+% górze da to dolny margines nieco więksy od górnego (i dobrze).
+% Gorzej będzie z~paginacją na dole.
+% \begin{macrocode}
+ \setlength\topmargin{\paperheight}
+ \addtolength\topmargin{-\headheight}
+ \addtolength\topmargin{-\headsep}
+ \addtolength\topmargin{-\textheight}
+ \addtolength\topmargin{-\footskip}
+ \divide\topmargin by2
+% \end{macrocode}
+% Przesunięcie o~cal podobnie jak dla marginesu lewego.
+% \begin{macrocode}
+ \addtolength\topmargin{-1in}
+% \@settopoint\topmargin
+% \end{macrocode}
+% \end{macro}
+%
+%
+% \subsubsection{Przypisy}
+%
+% \begin{macro}{\footnotesep}
+% |\footnotesep| is the height of the strut placed at the beginning
+% of every footnote. It equals the height of a normal
+% |\footnotesize| strut in this
+% class, thus no extra space occurs between footnotes.
+% \begin{macrocode}
+%<10pt>\setlength\footnotesep{6.65\p@}
+%<11pt>\setlength\footnotesep{7.7\p@}
+%<12pt>\setlength\footnotesep{8.4\p@}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\footins}
+% |\skip\footins| is the space between the last line of the main
+% text and the top of the first footnote.
+% \begin{macrocode}
+%<10pt>\setlength{\skip\footins}{9\p@ \@plus 4\p@ \@minus 2\p@}
+%<11pt>\setlength{\skip\footins}{10\p@ \@plus 4\p@ \@minus 2\p@}
+%<12pt>\setlength{\skip\footins}{10.8\p@ \@plus 4\p@ \@minus 2\p@}
+%</10pt|11pt|12pt>
+% \end{macrocode}
+% \end{macro}
+%
+% \subsubsection{Float placement parameters}
+%
+% All float parameters are given default values in the \LaTeXe{}
+% kernel. For this reason parameters that are not counters
+% need to be set with |\renewcommand|.
+%
+% \paragraph{Limits for the placement of floating objects}
+%
+% \begin{macro}{\c@topnumber}
+% The \Lcount{topnumber} counter holds the maximum number of
+% floats that can appear on the top of a text page.
+% \begin{macrocode}
+%<*article|report|book>
+\setcounter{topnumber}{2}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\topfraction}
+% This indicates the maximum part of a text page that can be
+% occupied by floats at the top.
+% \begin{macrocode}
+\renewcommand\topfraction{.7}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\c@bottomnumber}
+% The \Lcount{bottomnumber} counter holds the maximum number of
+% floats that can appear on the bottom of a text page.
+% \begin{macrocode}
+\setcounter{bottomnumber}{1}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\bottomfraction}
+% This indicates the maximum part of a text page that can be
+% occupied by floats at the bottom.
+% \changes{v1.0h}{1993/12/18}{Replaced \cs{newcommand} with
+% \cs{renewcommand}. ASAJ.}
+% \begin{macrocode}
+\renewcommand\bottomfraction{.3}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\c@totalnumber}
+% This indicates the maximum number of floats that can appear on
+% any text page.
+% \begin{macrocode}
+\setcounter{totalnumber}{3}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\textfraction}
+% This indicates the minimum part of a text page that has to be
+% occupied by text.
+% \changes{v1.0h}{1993/12/18}{Replaced \cs{newcommand} with
+% \cs{renewcommand}. ASAJ.}
+% \begin{macrocode}
+\renewcommand\textfraction{.2}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\floatpagefraction}
+% This indicates the minimum part of a page that has to be
+% occupied by floating objects before a `float page' is produced.
+% \changes{v1.0h}{1993/12/18}{Replaced \cs{newcommand} with
+% \cs{renewcommand}. ASAJ.}
+% \begin{macrocode}
+\renewcommand\floatpagefraction{.5}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\c@dbltopnumber}
+% The \Lcount{dbltopnumber} counter holds the maximum number of
+% two column floats that can appear on the top of a two column text
+% page.
+% \begin{macrocode}
+\setcounter{dbltopnumber}{2}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\dbltopfraction}
+% This indicates the maximum part of a two column text page that
+% can be occupied by two column floats at the top.
+% \changes{v1.0h}{1993/12/18}{Replaced \cs{newcommand} with
+% \cs{renewcommand}. ASAJ.}
+% \begin{macrocode}
+\renewcommand\dbltopfraction{.7}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\dblfloatpagefraction}
+% This indicates the minimum part of a page that has to be
+% occupied by two column wide floating objects before a `float
+% page' is produced.
+% \changes{v1.0h}{1993/12/18}{Replaced \cs{newcommand} with
+% \cs{renewcommand}. ASAJ.}
+% \begin{macrocode}
+\renewcommand\dblfloatpagefraction{.5}
+%</article|report|book>
+% \end{macrocode}
+% \end{macro}
+%
+% \paragraph{Floats on a text page}
+%
+% \begin{macro}{\floatsep}
+% \begin{macro}{\textfloatsep}
+% \begin{macro}{\intextsep}
+% When a floating object is placed on a page with text, these
+% parameters control the separation between the float and the other
+% objects on the page. These parameters are used for both
+% one-column mode and single-column floats in two-column mode.
+%
+% |\floatsep| is the space between adjacent floats that are moved
+% to the top or bottom of the text page.
+%
+% |\textfloatsep| is the space between the main text and floats
+% at the top or bottom of the page.
+%
+% |\intextsep| is the space between in-text floats and the text.
+% \begin{macrocode}
+%<*10pt>
+\setlength\floatsep {12\p@ \@plus 2\p@ \@minus 2\p@}
+\setlength\textfloatsep{20\p@ \@plus 2\p@ \@minus 4\p@}
+\setlength\intextsep {12\p@ \@plus 2\p@ \@minus 2\p@}
+%</10pt>
+%<*11pt>
+\setlength\floatsep {12\p@ \@plus 2\p@ \@minus 2\p@}
+\setlength\textfloatsep{20\p@ \@plus 2\p@ \@minus 4\p@}
+\setlength\intextsep {12\p@ \@plus 2\p@ \@minus 2\p@}
+%</11pt>
+%<*12pt>
+\setlength\floatsep {12\p@ \@plus 2\p@ \@minus 4\p@}
+\setlength\textfloatsep{20\p@ \@plus 2\p@ \@minus 4\p@}
+\setlength\intextsep {14\p@ \@plus 4\p@ \@minus 4\p@}
+%</12pt>
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\dblfloatsep}
+% \begin{macro}{\dbltextfloatsep}
+% When floating objects that span the whole |\textwidth| are placed
+% on a text page when we are in twocolumn mode the separation
+% between the float and the text is controlled by |\dblfloatsep|
+% and |\dbltextfloatsep|.
+%
+% |\dblfloatsep| is the space between adjacent floats that are moved
+% to the top or bottom of the text page.
+%
+% |\dbltextfloatsep| is the space between the main text and floats
+% at the top or bottom of the page.
+%
+% \begin{macrocode}
+%<*10pt>
+\setlength\dblfloatsep {12\p@ \@plus 2\p@ \@minus 2\p@}
+\setlength\dbltextfloatsep{20\p@ \@plus 2\p@ \@minus 4\p@}
+%</10pt>
+%<*11pt>
+\setlength\dblfloatsep {12\p@ \@plus 2\p@ \@minus 2\p@}
+\setlength\dbltextfloatsep{20\p@ \@plus 2\p@ \@minus 4\p@}
+%</11pt>
+%<*12pt>
+\setlength\dblfloatsep {14\p@ \@plus 2\p@ \@minus 4\p@}
+\setlength\dbltextfloatsep{20\p@ \@plus 2\p@ \@minus 4\p@}
+%</12pt>
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \paragraph{Floats on their own page or column}
+%
+% \begin{macro}{\@fptop}
+% \begin{macro}{\@fpsep}
+% \begin{macro}{\@fpbot}
+% When floating objects are placed on separate pages the layout of
+% such pages is controlled by these parameters. At the top of the
+% page |\@fptop| amount of stretchable whitespace is inserted, at
+% the bottom of the page we get an |\@fpbot| amount of stretchable
+% whitespace. Between adjacent floats the |\@fpsep| is inserted.
+%
+% These parameters are used for the placement of floating objects
+% in one column mode, or in single column floats in two column
+% mode.
+%
+% Note that at least one of the two parameters |\@fptop| and
+% |\@fpbot| should contain a |plus ...fil| to allow filling the
+% remaining empty space.
+% \begin{macrocode}
+%<*10pt>
+\setlength\@fptop{0\p@ \@plus 1fil}
+\setlength\@fpsep{8\p@ \@plus 2fil}
+\setlength\@fpbot{0\p@ \@plus 1fil}
+%</10pt>
+%<*11pt>
+\setlength\@fptop{0\p@ \@plus 1fil}
+\setlength\@fpsep{8\p@ \@plus 2fil}
+\setlength\@fpbot{0\p@ \@plus 1fil}
+%</11pt>
+%<*12pt>
+\setlength\@fptop{0\p@ \@plus 1fil}
+\setlength\@fpsep{10\p@ \@plus 2fil}
+\setlength\@fpbot{0\p@ \@plus 1fil}
+%</12pt>
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\@dblfptop}
+% \begin{macro}{\@dblfpsep}
+% \begin{macro}{\@dblfpbot}
+% Double column floats in two column mode are handled with similar
+% parameters.
+% \begin{macrocode}
+%<*10pt>
+\setlength\@dblfptop{0\p@ \@plus 1fil}
+\setlength\@dblfpsep{8\p@ \@plus 2fil}
+\setlength\@dblfpbot{0\p@ \@plus 1fil}
+%</10pt>
+%<*11pt>
+\setlength\@dblfptop{0\p@ \@plus 1fil}
+\setlength\@dblfpsep{8\p@ \@plus 2fil}
+\setlength\@dblfpbot{0\p@ \@plus 1fil}
+%</11pt>
+%<*12pt>
+\setlength\@dblfptop{0\p@ \@plus 1fil}
+\setlength\@dblfpsep{10\p@ \@plus 2fil}
+\setlength\@dblfpbot{0\p@ \@plus 1fil}
+%</12pt>
+%<*article|report|book>
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \subsection{Predefiniowane style nagłówków i stopek}
+%
+% Style nagłówków i stopek (\cs{pagestyle}) zostały zdefiniowane
+% w~sposób bardziej skomplikowany, niż ma to miejsce
+% w~standardowych klasach \LaTeX a.
+%
+% Standardowe klasy zawsze używają stylu \pstyle{plain} na
+% początkowych stronach rozdziałów. To uproszczone rozwiązanie nie
+% da się zastosować w~naszym przypadku, ponieważ np. w~stylu
+% \pstyle{outer} pierwsze strony rozdziałów zachowują ten styl.
+% Dlatego zastosowałem rozwiązanie bardziej ogólne, wprowadzając
+% trzy rodzaje stylów. Gdyby projektować system stylów od początku,
+% należałoby go tak zrealizować, aby nie nakładały się pojęcia.
+% Tutaj jednak aby uniknąć zbytnich ingerencji w kernel \LaTeX a
+% stosuję rozwiązanie ździebko pokrętne.
+%
+% Wprowadzone zostają następujące style funkcjonalne, których
+% definicja zmienia się w~zależności od wybranego stylu
+% ,,prawdziwego'':
+% \begin{description}
+% \item[normal] używany na większości kolumn tekstowych,
+% \item[opening] używany na kolumnach spuszczonych (pusty nagłówek),
+% \item[closing] stosowany na kolumnach niepełnych (pusta stopka),
+% \item[blank] dla strony tytułowej i stron rozpoczynających części
+% (\cs{part}s) dokumentu (pusty zarówno nagłówek jak i stopka).
+% \end{description}
+%
+% Kolejny poziom definicji stylów stanowią makra o nazwach typu
+% \cs{hf@empty}. Stanowią one podstawowe cegiełki zmieniające
+% zawartość nagłówka i stopki.
+%
+% Wreszcie zasadnicze definicje stylów wymienionych w~dokumentacji
+% użytkowej wiążą z~poszczególnymi stylami funkcjonalnymi cegiełki
+% wspomniane wyżej oraz definiują odpowiednio polecenia
+% \cs{...mark}.
+%
+% \subsubsection{Style składowe}
+%
+% Zestaw stylów\dywiz cegiełek odpowiada (z~grubsza) zestwowi
+% stylów stron.
+% \begin{macro}{\hf@empty}
+% Najprostszy jest styl pusty:
+% \begin{macrocode}
+\newcommand\hf@empty{%
+ \let\@oddhead\@empty \let\@oddfoot\@empty
+ \let\@evenhead\@empty \let\@evenfoot\@empty}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\hf@plain}
+% Styl \pstyle{plain} zawiera numer strony wycentrowany w~stopce:
+% \begin{macrocode}
+\newcommand\hf@plain{%
+ \let\@oddhead\@empty
+ \def\@oddfoot{\reset@font\hfil\thepage\hfil}%
+ \let\@evenhead\@empty
+ \let\@evenfoot\@oddfoot}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\hf@outer}
+% W stylu \pstyle{outer} paginacja znajduje siÄ™ w~stopce po stronie
+% zewnętrznego marginesu:
+% \begin{macrocode}
+\newcommand\hf@outer{%
+ \let\@oddhead\@empty
+ \def\@oddfoot{\reset@font\hfil\thepage}%
+ \let\@evenhead\@empty
+ \def\@evenfoot{\reset@font\thepage\hfil}}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\hf@headings}
+% Teraz przechodzimy do stylów zawierających żywą paginę w~główce
+% strony:
+% \begin{macrocode}
+\newcommand\heading@font{\small\itshape}
+\newcommand\hf@headings{%
+ \def\@oddhead{\reset@font{\heading@font\rightmark}\hfil\thepage}%
+ \let\@oddfoot\@empty
+ \def\@evenhead{\reset@font\thepage\hfil\heading@font\leftmark}%
+ \let\@evenfoot\@empty
+ }
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\hf@uheadings}
+% Wariant poprzedniego z~linią podkreślającą główkę. Linia jest
+% zaprogramowana tak, aby nie zajmować miejsca --- lokuje się
+% wewnątrz odstępu \cs{headsep}.
+% \begin{macrocode}
+\newcommand\hf@uheadings{%
+ \def\@oddhead{\vtop{%
+ \hb@xt@\textwidth{%
+ \reset@font{\heading@font\rightmark}\hfil\thepage\strut}%
+ \vskip2pt\hrule\vskip-2.4pt}}%
+ \let\@oddfoot\@empty
+ \def\@evenhead{\vtop{%
+ \hb@xt@\textwidth{%
+ \reset@font\strut\thepage\hfil\heading@font\leftmark}%
+ \vskip2pt\hrule\vskip-2.4pt}}%
+ \let\@evenfoot\@empty
+ }
+% \end{macrocode}
+% \end{macro}
+%
+% \subsubsection{Style stron}
+%
+% Przyszła pora zdefiniować prawdziwe style stron (czyli makra
+% \cs{ps@}\pstyle{nazwa stylu}. Makra te zajmują się również
+% problemem generowania żywej paginy. Dokładniejszy opis
+% filozoficzny można znaleźć w~dokumentacji angielskich klas
+% dokumentów.
+%
+% \begin{macro}{\ps@empty}
+% Styl pusty w każdej funkcji używa pustych nagłówków i stopek.
+% Polecenia \cs{...mark} sa ignorowane.
+% \begin{macrocode}
+\def\ps@empty{%
+ \let\@mkboth\@gobbletwo
+ \let\ps@normal\hf@empty
+ \let\ps@opening\hf@empty
+ \let\ps@closing\hf@empty
+ \let\ps@blank\hf@empty
+ \ps@normal}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\ps@plain}
+% Styl \pstyle{plain} nie ma paginacji na stronach tytułowych i
+% niepełnych kolumnach(??).
+% \begin{macrocode}
+\def\ps@plain{%
+ \let\@mkboth\@gobbletwo
+ \let\ps@normal\hf@plain
+ \let\ps@opening\hf@plain
+ \let\ps@closing\hf@empty
+ \let\ps@blank\hf@empty
+ \ps@normal}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\ps@outer}
+% Styl \pstyle{outer} jest zdefiniowany analogicznie.
+% \begin{macrocode}
+\def\ps@outer{%
+ \let\@mkboth\@gobbletwo
+ \let\ps@normal\hf@outer
+ \let\ps@opening\hf@outer
+ \let\ps@closing\hf@empty
+ \let\ps@blank\hf@empty
+ \ps@normal}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\ps@headings}
+% Definicja stylu \pstyle{headings} zależy od tego, czy stosujemy
+% druk dwustronny oraz od klasy dokumentu. Żywa pagina jest
+% generowana automatycznie (\cs{@mkboth}).
+% \begin{macrocode}
+\if@twoside
+ \def\ps@headings{%
+ \let\@mkboth\markboth
+ \let\ps@normal\hf@headings
+ \let\ps@opening\hf@empty
+ \let\ps@closing\hf@headings
+ \let\ps@blank\hf@empty
+ \ps@normal
+% \end{macrocode}
+%
+% For the article document class we define |\sectionmark| to clear
+% the right mark and put the number of the section (when it is
+% numbered) and its title in the left mark. The rightmark is set by
+% |\subsectionmark| to contain the subsection titles.
+%
+% Note the use of |##1| for the parameter of the |\sectionmark|
+% command, which will be defined when |\ps@headings| is executed.
+%
+% \begin{macrocode}
+%<*article>
+ \def\sectionmark##1{%
+ \markboth{%
+ \ifHeadingNumbered \thesection.\enspace \fi
+ ##1}{}}%
+ \def\subsectionmark##1{%
+ \markright{%
+ \ifHeadingNumbered \thesubsection.\enspace \fi
+ ##1}}}
+%</article>
+% \end{macrocode}
+%
+% In the report and book document classes we use the |\chaptermark|
+% and |\sectionmark| macros to fill the running heads.
+%
+% \begin{macrocode}
+%<*report|book>
+ \def\chaptermark##1{%
+ \markboth{%
+ \ifHeadingNumbered
+%<book> \if@mainmatter
+%<book> \@chapapp\
+ \thechapter.\enspace
+%<book> \fi
+ \fi
+ ##1}{}}%
+ \def\sectionmark##1{%
+ \markright{%
+ \ifHeadingNumbered \thesection.\enspace \fi
+ ##1}}}
+%</report|book>
+% \end{macrocode}
+%
+% The definition of |\ps@headings| for one sided printing can be
+% much simpler, because we treat even and odd pages the same.
+% \begin{macrocode}
+\else
+ \def\ps@headings{%
+ \let\@mkboth\markboth
+ \let\ps@normal\hf@headings
+ \let\ps@opening\hf@empty
+ \let\ps@closing\hf@headings
+ \let\ps@blank\hf@empty
+ \ps@normal
+% \end{macrocode}
+% We use |\markright| now instead of |\markboth| as we did for two
+% sided printing.
+% \begin{macrocode}
+%<*article>
+ \def\sectionmark##1{%
+ \markright{%
+ \ifHeadingNumbered \thesection.\enspace \fi
+ ##1}}}
+%</article>
+% \end{macrocode}
+%
+% \begin{macrocode}
+%<*report|book>
+ \def\chaptermark##1{%
+ \markright{%
+ \ifHeadingNumbered
+%<book> \if@mainmatter
+%<book> \@chapapp\
+ \thechapter.\enspace
+%<book> \fi
+ \fi
+ ##1}}}
+%</report|book>
+\fi
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\ps@myheadings}
+% PoczÄ…tek definicji jest taki, jak dla stylu \pstyle{headings},
+% \begin{macrocode}
+\def\ps@myheadings{%
+ \let\ps@normal\hf@headings
+ \let\ps@opening\hf@empty
+ \let\ps@closing\hf@headings
+ \let\ps@blank\hf@empty
+ \ps@normal
+% \end{macrocode}
+% ale komendy \cs{...mark} w~nagłówkach rozdziałów są ignorowane.
+% \begin{macrocode}
+ \let\@mkboth\@gobbletwo
+%<!article> \let\chaptermark\@gobble
+ \let\sectionmark\@gobble
+%<article> \let\subsectionmark\@gobble
+ }
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\ps@uheadings}
+% Definicja stylu \pstyle{uheadings} różni się od \pstyle{headings}
+% tylko innym stylem bazowym.
+% \begin{macrocode}
+\if@twoside
+ \def\ps@uheadings{%
+ \let\@mkboth\markboth
+ \let\ps@normal\hf@uheadings
+ \let\ps@opening\hf@empty
+ \let\ps@closing\hf@uheadings
+ \let\ps@blank\hf@empty
+ \ps@normal
+%<*article>
+ \def\sectionmark##1{%
+ \markboth{%
+ \ifHeadingNumbered \thesection.\enspace \fi
+ ##1}{}}%
+ \def\subsectionmark##1{%
+ \markright{%
+ \ifHeadingNumbered \thesubsection.\enspace \fi
+ ##1}}}
+%</article>
+%<*report|book>
+ \def\chaptermark##1{%
+ \markboth{%
+ \ifHeadingNumbered
+%<book> \if@mainmatter
+%<book> \@chapapp\
+ \thechapter.\enspace
+%<book> \fi
+ \fi
+ ##1}{}}%
+ \def\sectionmark##1{%
+ \markright{%
+ \ifHeadingNumbered \thesection.\enspace \fi
+ ##1}}}
+%</report|book>
+% \end{macrocode}
+% I dla druku jednostronnego:
+% \begin{macrocode}
+\else
+ \def\ps@uheadings{%
+ \let\@mkboth\markboth
+ \let\ps@normal\hf@uheadings
+ \let\ps@opening\hf@empty
+ \let\ps@closing\hf@uheadings
+ \let\ps@blank\hf@empty
+ \ps@normal
+%<*article>
+ \def\sectionmark##1{%
+ \markright{%
+ \ifHeadingNumbered \thesection.\enspace \fi
+ ##1}}}
+%</article>
+%<*report|book>
+ \def\chaptermark##1{%
+ \markright{%
+ \ifHeadingNumbered
+%<book> \if@mainmatter
+%<book> \@chapapp\
+ \thechapter.\enspace
+%<book> \fi
+ \fi
+ ##1}}}
+%</report|book>
+\fi
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\ps@myuheadings}
+% Podobnie ma siÄ™ \pstyle{myuheadings} do \pstyle{uheadings}.
+% \begin{macrocode}
+\def\ps@myuheadings{%
+ \let\ps@normal\hf@uheadings
+ \let\ps@opening\hf@empty
+ \let\ps@closing\hf@uheadings
+ \let\ps@blank\hf@empty
+ \ps@normal
+ \let\@mkboth\@gobbletwo
+%<!article> \let\chaptermark\@gobble
+ \let\sectionmark\@gobble
+%<article> \let\subsectionmark\@gobble
+ }
+% \end{macrocode}
+% \end{macro}
+%
+% \section{Document Markup}
+%
+% \subsection{Karta tytułowa}
+%
+% \begin{macro}{\title}
+% \begin{macro}{\author}
+% \begin{macro}{\date}
+% These three macros are provided by \file{latex.dtx} to provide
+% information about the title, author(s) and date of the document.
+% The information is stored away in internal control sequences.
+% It is the task of the |\maketitle| command to use the
+% information provided. The definitions of these macros are shown
+% here for information.
+% \begin{macrocode}
+% \newcommand*{\title}[1]{\gdef\@title{#1}}
+% \newcommand*{\author}[1]{\gdef\@author{#1}}
+% \newcommand*{\date}[1]{\gdef\@date{#1}}
+% \end{macrocode}
+% Umieszczanie daty w tytule dokumentu po polsku nie wydaje się być
+% zbyt rozpowszechnione, więc domyślnie \cs{date} jest puste.
+% \begin{macrocode}
+\let\@date\@empty
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\maketitle}
+% Definicja \cs{maketitle} jest zależna od tego, czy tytuł ma być
+% umieszczony na oddzielnej stronie.
+%
+% When we are making a title page, we locally redefine
+% |\footnotesize| and |footnoterule| to change the appearance of
+% the footnotes that are produced by the |\thanks| command;
+% these changes affect all footnotes.
+% \begin{macrocode}
+ \if@titlepage
+ \newcommand\maketitle{\begin{titlepage}%
+ \let\footnotesize\small
+ \let\footnoterule\relax
+ \let \footnote \thanks
+% \end{macrocode}
+%
+% \begin{macrocode}
+ \null\vfill
+% \end{macrocode}
+% Kolejność umieszczenia autora i tytułu zależy od przełącznika
+% \cs{if@authorfirst}.
+% \begin{macrocode}
+ \begin{center}%
+ \titlesettings
+ {\large
+ \if@authorfirst\else
+ {\LARGE \@title \par}%
+ \vskip6ex \fi
+ {\normalsize
+ \begin{tabular}[t]{c}%
+ \Large\strut\@author
+ \end{tabular}\par}%
+ \if@authorfirst
+ \vskip6ex
+ {\LARGE \@title \par}\fi
+ }%
+ \end{center}\par
+% \end{macrocode}
+% Then we call |\@thanks| to print the information that goes into
+% the footnote and finish the page.
+% \begin{macrocode}
+ \vfill\vfill
+ {\centering\normalsize \@date \par}
+ \@thanks
+ \end{titlepage}%
+% \end{macrocode}
+% We reset the \Lcount{footnote} counter, disable |\thanks| and
+% |\maketitle| and save some storage space by emptying the internal
+% information macros.
+% \begin{macrocode}
+ \setcounter{footnote}{0}%
+ \global\let\thanks\relax
+ \global\let\maketitle\relax
+ \global\let\@thanks\@empty
+ \global\let\@author\@empty
+ \global\let\@date\@empty
+ \global\let\@title\@empty
+% \end{macrocode}
+% After the title is set the declaration commands |\title|, etc.\
+% can vanish.
+% The definition of |\and| makes only sense within the argument of
+% |\author| so this can go as well.
+% \begin{macrocode}
+ \global\let\title\relax
+ \global\let\author\relax
+ \global\let\date\relax
+ \global\let\and\relax
+}
+% \end{macrocode}
+% Gdy tytuł zajmuje oddzielną stronę nazwiska autorów umieszczamy
+% jedno pod drugim:
+% \begin{macrocode}
+\def\and{\\\Large\strut}
+% \end{macrocode}
+% When the title is not on a page of its own, the layout of the
+% title is a little different. We use symbols to mark the footnotes
+% and we have to deal with two column documents.
+%
+% Therefore we first start a new group to keep changes local. Then
+% we redefine |\thefootnote| to use |\fnsymbol|.
+% \begin{macrocode}
+\else
+\newcommand\maketitle{\par
+ \begingroup
+ \renewcommand\thefootnote{\@fnsymbol\c@footnote}%
+ \long\def\@makefntext##1{
+ \parindent\@parindent
+ \@textsuperscript{\normalfont\@thefnmark}\enspace##1}%
+% \end{macrocode}
+% If this is a twocolumn document we start a new page in twocolumn
+% mode, with the title set to the full width of the text. The
+% actual printing of the title information is left to
+% |\@maketitle|.
+% \begin{macrocode}
+ \if@twocolumn
+ \ifnum \col@number=\@ne
+ \@maketitle
+ \else
+ \twocolumn[\@maketitle]%
+ \fi
+ \else
+% \end{macrocode}
+% When this is not a twocolumn document we just start a new page,
+% prevent floating objects from appearing on the top of this page
+% and print the title information.
+% \begin{macrocode}
+ \newpage
+ \global\@topnum\z@ % Prevents figures from going at top of page.
+ \@maketitle
+ \fi
+% \end{macrocode}
+% This page gets a \pstyle{plain} layout. We call |\@thanks| to
+% produce the footnotes.
+% \begin{macrocode}
+ \thispagestyle{opening}\@thanks
+% \end{macrocode}
+% Now we can close the group, reset the \Lcount{footnote} counter,
+% disable |\thanks|, |\maketitle| and |\@maketitle| and save some
+% storage space by emptying the internal information macros.
+% \begin{macrocode}
+ \endgroup
+ \setcounter{footnote}{0}%
+ \global\let\thanks\relax
+ \global\let\maketitle\relax
+ \global\let\@maketitle\relax
+ \global\let\@thanks\@empty
+ \global\let\@author\@empty
+ \global\let\@date\@empty
+ \global\let\@title\@empty
+ \global\let\title\relax
+ \global\let\author\relax
+ \global\let\date\relax
+ \global\let\and\relax
+}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@maketitle}
+% This macro takes care of formatting the title information when we
+% have no separate title page.
+%
+% \begin{macrocode}
+\def\@maketitle{%
+ \newpage
+ \null
+ \vskip 2\baselineskip
+ \begin{center}%
+ \let \footnote \thanks
+ \titlesettings\large
+ \if@authorfirst\else
+ {\LARGE \@title \par}%
+ \vskip\baselineskip \fi
+ {\normalsize
+ \begin{tabular}[t]{c}%
+ \large\strut\@author
+ \end{tabular}\par}%
+ \if@authorfirst
+ \vskip\baselineskip
+ {\LARGE \@title \par}\fi
+ \ifx\@date\@empty\else
+ \vskip \baselineskip
+ {\normalsize\@date}\fi
+ \end{center}%
+ \par
+ \vskip 2\baselineskip
+ }
+% \end{macrocode}
+% W tym przypadku umieszczamy nazwiska autorów obok siebie
+% oddzielone firetem.
+% \begin{macrocode}
+\def\and{% % \begin{tabular}
+ \end{tabular}%
+ \quad
+ \begin{tabular}[t]{c}%
+ \large\strut}% % \end{tabular}
+\fi
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Chapters and Sections}
+%
+% \subsubsection{Building blocks}
+% Następujące dalej definicje używają makra \cs{@startsection}
+% zdefiniowanego w~kernelu \LaTeX a. Niestety musimy wprowadzić do
+% niego niejakie modyfikacje.
+%
+% \begin{macro}{\@sect}
+% To jest część \cs{@startsection} odpowiedzialna za formatowanie
+% numerowanych tytułów podrozdziałów.
+% \begin{macrocode}
+\def\@sect#1#2#3#4#5#6[#7]#8{%
+ \ifnum #2>\c@secnumdepth
+ \let\@svsec\@empty
+ \else
+ \refstepcounter{#1}%
+ \protected@edef\@svsec{\@seccntformat{#1}\relax}%
+ \fi
+ \@tempskipa #5\relax
+ \ifdim \@tempskipa>\z@
+ \begingroup
+ \normalfont\sectsettings#6{%
+ \language\l@nohyphenation \raggedright
+ \interlinepenalty \@M
+ \leftskip #3\noindent
+ \@svsec\ignorespaces
+ #8\@@par}%
+ \endgroup
+ \csname #1mark\endcsname{#7}%
+ \addcontentsline{toc}{#1}{%
+ \ifnum #2>\c@secnumdepth \else
+ \protect\numberline{\csname the#1\endcsname.}%
+ \fi
+ #8}%
+ \else
+ \def\@svsechd{%
+ \normalfont\sectsettings#6{\hskip #3\relax
+ \@svsec\ignorespaces #8}%
+ \csname #1mark\endcsname{#7}%
+ \addcontentsline{toc}{#1}{%
+ \ifnum #2>\c@secnumdepth \else
+ \protect\numberline{\csname the#1\endcsname.}%
+ \fi
+ #8}}%
+ \fi
+ \@xsect{#5}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@ssect}
+% A to dla podrozdziałów nienumerowanych.
+% \begin{macrocode}
+\def\@ssect#1#2#3#4#5{%
+ \@tempskipa #3\relax
+ \ifdim \@tempskipa>\z@
+ \begingroup
+ \normalfont\sectsettings#4{%
+ \language\l@nohyphenation \raggedright
+ \interlinepenalty \@M
+ \leftskip #1\noindent\ignorespaces
+ #5\@@par}%
+ \endgroup
+ \else
+ \def\@svsechd{\normalfont\sectsettings#4{\hskip #1\relax #5}}%
+ \fi
+ \@xsect{#3}}
+% \end{macrocode}
+% \end{macro}
+%
+% Wedle polskich zwyczajów po tytułach stosuje się normalne wcięcie
+% akapitowe. Następujące hakerstwo wyłącza mechanizm wyłączający
+% wcięcia po tytułach.
+% \begin{macrocode}
+% \let\@afterindentfalse\@afterindenttrue
+% \@afterindenttrue
+% \end{macrocode}
+%
+% \subsubsection{Polecenia \cs{...mark}}
+%
+% \begin{macro}{\chaptermark}
+% \begin{macro}{\sectionmark}
+% \begin{macro}{\subsectionmark}
+% \begin{macro}{\subsubsectionmark}
+% \begin{macro}{\paragraphmark}
+% \begin{macro}{\subparagraphmark}
+% Default initializations of |\...mark| commands. These commands
+% are used in the definition of the page styles. Most of them are
+% already defined by \file{latex.ltx}, so they are only shown here.
+%
+% \begin{macrocode}
+\newcommand*\partmark[1]{\markboth{}{}}
+%<!article>\newcommand*\chaptermark[1]{}
+% \newcommand*\sectionmark[1]{}
+% \newcommand*\subsectionmark[1]{}
+% \newcommand*\subsubsectionmark[1]{}
+% \newcommand*\paragraphmark[1]{}
+% \newcommand*\subparagraphmark[1]{}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \subsubsection{Define Counters}
+%
+% \begin{macro}{\c@secnumdepth}
+% The value of the counter \Lcount{secnumdepth} gives the depth of
+% the highest-level sectioning command that is to produce section
+% numbers.
+% \begin{macrocode}
+%<article>\setcounter{secnumdepth}{3}
+%<!article>\setcounter{secnumdepth}{2}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\c@part}
+% \begin{macro}{\c@chapter}
+% \begin{macro}{\c@section}
+% \begin{macro}{\c@subsection}
+% \begin{macro}{\c@subsubsection}
+% \begin{macro}{\c@paragraph}
+% \begin{macro}{\c@subparagraph}
+% These counters are used for the section numbers. The macro\\
+% |\newcounter{|\meta{newctr}|}[|\meta{oldctr}|]|\\
+% defines\meta{newctr} to be a counter, which is reset to zero when
+% counter \meta{oldctr} is stepped. Counter \meta{oldctr} must
+% already be defined.
+%
+% \begin{macrocode}
+\newcounter {part}
+%<article>\newcounter {section}
+%<*report|book>
+\newcounter {chapter}
+\newcounter {section}[chapter]
+%</report|book>
+\newcounter {subsection}[section]
+\newcounter {subsubsection}[subsection]
+\newcounter {paragraph}[subsubsection]
+\newcounter {subparagraph}[paragraph]
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\thepart}
+% \begin{macro}{\thechapter}
+% \begin{macro}{\thesection}
+% \begin{macro}{\thesubsection}
+% \begin{macro}{\thesubsubsection}
+% \begin{macro}{\theparagraph}
+% \begin{macro}{\thesubparagraph}
+% For any counter \Lcount{CTR}, |\theCTR| is a macro that defines
+% the printed version of counter \Lcount{CTR}. It is defined in
+% terms of the following macros:
+%
+% |\arabic{|\Lcount{COUNTER}|}| prints the value of
+% \Lcount{COUNTER} as an arabic numeral.
+%
+% |\roman{|\Lcount{COUNTER}|}| prints the value of
+% \Lcount{COUNTER} as a lowercase roman numberal.
+%
+% |\Roman{|\Lcount{COUNTER}|}| prints the value of
+% \Lcount{COUNTER} as an uppercase roman numberal.
+%
+% |\alph{|\Lcount{COUNTER}|}| prints the value of \Lcount{COUNTER}
+% as a lowercase letter: $1 =$~a, $2 =$~ b, etc.
+%
+% |\Alph{|\Lcount{COUNTER}|}| prints the value of \Lcount{COUNTER}
+% as an uppercase letter: $1 =$~A, $2 =$~B, etc.
+%
+% Actually to save space the internal counter repesentations
+% and the commands operating on those are used.
+% \begin{macrocode}
+\renewcommand \thepart {\@Roman\c@part}
+%<article>\renewcommand \thesection {\@arabic\c@section}
+%<*report|book>
+\renewcommand \thechapter {\@arabic\c@chapter}
+\renewcommand \thesection {\thechapter.\@arabic\c@section}
+%</report|book>
+\renewcommand\thesubsection {\thesection.\@arabic\c@subsection}
+\renewcommand\thesubsubsection{\thesubsection .\@arabic\c@subsubsection}
+\renewcommand\theparagraph {\thesubsubsection.\@arabic\c@paragraph}
+\renewcommand\thesubparagraph {\theparagraph.\@arabic\c@subparagraph}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\...@level}
+%
+% \begin{macrocode}
+\def\part@level{-1}
+%<!article>\def\chapter@level{0}
+\def\section@level{1}
+\def\subsection@level{2}
+\def\subsubsection@level{3}
+\def\paragraph@level{4}
+\def\subparagraph@level{5}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@chapapp}
+% |\@chapapp| is initially defined to be `|\chaptername|'. The
+% |\appendix| command redefines it to be `|\appendixname|'.
+%
+% \begin{macrocode}
+%<report|book>\newcommand\@chapapp{\chaptername}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@seccntformat}
+% Na potrzeby polskości zmieniamy zdefiniowane przez jądro makro
+% \cs{@seccntformat}: dodajemy kropkę i zmieniamy odstęp na pół
+% fireta.
+% \begin{macrocode}
+\renewcommand*\@seccntformat[1]{\csname the#1\endcsname.\enspace}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsubsection{Front Matter, Main Matter, and Back Matter}
+%
+% \begin{macro}{\cleardoublepage}
+% Przedefiniowujemy zdefiniowane w~kernelu makro
+% \cs{cleardoublepage} tak, aby ewentualna pusta strona nie miała
+% paginacji.
+% \begin{macrocode}
+\def\cleardoublepage{\clearpage
+ \if@twoside
+ \ifodd\c@page\else
+ \hbox{}\thispagestyle{blank}\newpage
+ \if@twocolumn\hbox{}\newpage\fi
+ \fi
+ \fi}
+% \end{macrocode}
+% \end{macro}
+%
+% A book contains these three (logical) sections. The switch
+% |\@mainmatter| is true iff we are processing Main Matter. When
+% this switch is false, the |\chapter| command does not print
+% chapter numbers.
+%
+% Here we define the commands that start these sections.
+% \begin{macro}{\frontmatter}
+% This command starts Roman page numbering and turns off chapter
+% numbering. Since this restarts the page numbering from 1, it
+% should also ensure that a recto page is used.
+% \begin{macrocode}
+%<*book>
+\newcommand\frontmatter{%
+ \cleardoublepage
+ \@mainmatterfalse
+ \pagenumbering{Roman}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\mainmatter}
+% This command clears the page, starts arabic page numbering and
+% turns on chapter numbering. Since this restarts the page numbering
+% from 1, it should also ensure that a recto page is used.
+% \begin{macrocode}
+\newcommand\mainmatter{%
+ \cleardoublepage
+ \@mainmattertrue
+ \pagenumbering{arabic}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\backmatter}
+% This clears the page, turns off chapter numbering and leaves page
+% numbering unchanged.
+% \begin{macrocode}
+\newcommand\backmatter{%
+ \if@openright
+ \cleardoublepage
+ \else
+ \clearpage
+ \fi
+ \@mainmatterfalse}
+%</book>
+% \end{macrocode}
+% \end{macro}
+%
+% \subsubsection{Cegiełki składowe}
+%
+% \begin{macro}{\if@HeadingRunIn}
+% Reprezentacja flag, które mogą pojawić się w~tytulariach.
+% Odpowiadają one za a)~nagłówki rozpoczynające akapit
+% (\emph{run-in}) (r/v), b)~wymuszenie Å‚amania strony przed (jak
+% w~\cs{chapter}) (b/n), c)~wymuszenie Å‚amania strony po (jak
+% w~\cs{part}) (b/n), d)~czy tytuł zajmuje wszystkie łamy, czy tylko
+% bieżący (w/c).
+% \begin{macrocode}
+%\newif\if@HeadingRunIn
+%\newif\if@HeadingBreakBefore
+%\newif\if@HeadingBreakAfter
+%\newif\if@HeadingWholeWidth
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\mw@getflags}
+% Powyższe flagi dla poszczególnych poziomów tytulariów są
+% przechowywane w~postaci czterech znaków stanowiących treść makra
+% \cs{...@flags}. Poniższe makro ustawia flagi na podstawie tej
+% upakowanej postaci.
+% \begin{macrocode}
+\newcommand*\mw@getflags[1]{%
+ \expandafter\expandafter\expandafter
+ \mw@getflagsx\csname#1@flags\endcsname}
+\newcommand*\mw@getflagsx[4]{%
+ \def\mw@HeadingRunIn{1#1}%
+ \def\mw@HeadingBreakBefore{1#2}%
+ \def\mw@HeadingBreakAfter{1#3}%
+ \def\mw@HeadingWholeWidth{1#4}%
+}
+\newcommand*\mw@setflags[1]{%
+ \expandafter\edef\csname#1@flags\endcsname{%
+ \if\mw@HeadingRunIn 1\else 0\fi
+ \if\mw@HeadingBreakBefore 1\else 0\fi
+ \if\mw@HeadingBreakAfter 1\else 0\fi
+ \if\mw@HeadingWholeWidth 1\else 0\fi
+ }
+ }
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\mw@section}
+% Argument: nazwa poziomu podziału
+% \begin{macrocode}
+\newcommand*\mw@section[1]{%
+ \mw@getflags{#1}%
+% \end{macrocode}
+% \cs{@noskipsec} jest prawdziwe jeśli w~dokumencie przed danym
+% nagłówkiem wystąpił bezodstępowy
+% nagłówek (\cs{paragraph}) sekcji bez treści. \cs{leavevmode}
+% wprowadza nowy pusty akapit, żeby się wypróżniło \cs{everypar}.
+% \begin{macrocode}
+ \if@noskipsec \leavevmode \fi
+ \par
+ \if@nobreak \everypar{}\fi
+ \@ifstar
+ {\HeadingNumberedfalse\@dblarg{\mw@sectionx{#1}}}%
+ {\HeadingNumberedtrue\@dblarg{\mw@sectionx{#1}}}}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\mw@step@sectioning@counter}
+% This macro advances sectioning counter used for numbered
+% headings. Hyperref hijacks \cs{refstepcounter} to add a link to the
+% title, so we have to be extra careful to avoid pagebreaks between
+% this and the heading.
+% \begin{macrocode}
+\def\mw@step@sectioning@counter{%
+ \ifHeadingNumbered
+ \refstepcounter{\mw@HeadingType}%
+ \protected@edef\HeadingNumber{\expandafter\noexpand
+ \csname the\mw@HeadingType\endcsname\relax}%
+ \else
+ \mw@hyperref@phantom{\mw@HeadingType}%
+ \let\HeadingNumber\@empty
+ \fi
+}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\mw@sectionx}
+%
+% \begin{macrocode}
+\def\mw@sectionx#1[#2]{%
+ \@dblarg{\mw@sectionxx{#1}{#2}}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\mw@sectionxx}
+% \changes{0.67}{2004/09/26}{dodałem ea-noe w definicji
+% HeadingNumber, żeby dawało się lokalnie przedefiniować
+% the-cośtam (np. Część pierwsza, a w paginie
+% inaczej).}\changes{0.72}{2009/08/30}{Przesunięte ewentualne
+% łamanie strony przed \cs{refstepcounter}, którego hyperref
+% używa do wstawienia odsyłacza. Dotychczasowa wersja knociła
+% odsyłacze do rozdziałów.}
+% \begin{macrocode}
+\def\mw@sectionxx#1#2[#3]#4{%
+ \if\mw@HeadingBreakBefore
+ \if@specialpage\else\thispagestyle{closing}\fi
+%<!article> \if@openright\cleardoublepage\else
+ \clearpage
+%<!article> \fi
+ \if\mw@HeadingBreakAfter
+ \thispagestyle{blank}\else
+ \thispagestyle{opening}\fi
+% \end{macrocode}
+% Then we prevent floats from appearing at the top of this page
+% because it looks weird to see a floating object above a chapter
+% title.
+% \begin{macrocode}
+ \global\@topnum\z@
+ \fi
+ \edef\mw@HeadingLevel{\csname #1@level\endcsname
+ \space}% space delimits level number!
+ \ifHeadingNumbered
+ \ifnum \mw@HeadingLevel>\c@secnumdepth \HeadingNumberedfalse \fi
+%<book> \if@mainmatter\else \HeadingNumberedfalse \fi
+ \fi
+ \def\HeadingRHeadText{#2}%
+ \def\HeadingTOCText{#3}%
+ \def\HeadingText{#4}%
+ \def\mw@HeadingType{#1}%
+%%
+ \if\mw@HeadingRunIn
+ \mw@runinheading
+ \else
+ \if\mw@HeadingWholeWidth
+ \if@twocolumn
+% \end{macrocode}
+% When we are making a two column document, this will be a one
+% column page. We use |@tempswa| to remember to switch back to two
+% columns.
+% \begin{macrocode}
+ \if\mw@HeadingBreakAfter
+ \onecolumn
+ \mw@normalheading
+ \pagebreak\relax
+% \end{macrocode}
+% Then, when we are in twosided mode, we produce a completely blank
+% page.
+% \begin{macrocode}
+ \if@twoside
+ \null
+ \thispagestyle{blank}%
+ \newpage
+ \fi
+ \twocolumn
+ \else
+ \@topnewpage[\mw@normalheading]%
+ \mw@markandtoc
+ \fi
+ \else
+ \mw@normalheading
+ \if\mw@HeadingBreakAfter\pagebreak\relax\fi
+ \fi
+ \else
+ \mw@normalheading
+ \if\mw@HeadingBreakAfter\pagebreak\relax\fi
+ \fi
+ \fi
+ }
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\mw@markandtoc}
+%
+% \begin{macrocode}
+\newcommand*\mw@markandtoc{%
+% \ifHeadingNumbered
+ \csname \mw@HeadingType mark\endcsname{\HeadingRHeadText}%
+ \ifnum \mw@HeadingLevel>\c@tocdepth \else
+ \expandafter\ifx\csname \mw@HeadingType @toc\endcsname\relax
+ \addcontentsline{toc}{\mw@HeadingType }{\ifHeadingNumbered
+ \protect\numberline{\mw@seccntformat{\HeadingNumber}}\fi
+ \HeadingTOCText}%
+ \else
+ \csname \mw@HeadingType @toc\endcsname
+ \fi
+ \fi
+% \fi
+ }%
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\mw@seccntformat}
+%
+% \begin{macrocode}
+\def\mw@seccntformat#1{#1.\enspace}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\mw@normalheading}
+%
+% \begin{macrocode}
+\newcommand*\mw@normalheading{%
+ \if\mw@HeadingBreakBefore \hrule\@height\z@\nobreak
+ \else \addpenalty\@secpenalty \fi
+ \addvspace{\csname \mw@HeadingType @preskip\endcsname}%
+ \mw@step@sectioning@counter
+ \bgroup\language\l@nohyphenation
+ \raggedright
+ \interlinepenalty\@M
+ \normalfont\sectsettings
+ \csname \mw@HeadingType @head\endcsname
+ \@@par
+ \egroup
+% \end{macrocode}
+% \cs{mw@markandtoc} ma się wykonać za wyjątkiem wypadku
+% \cs{@topnewpage}, który ma to polecenie dodane osobno, więc
+% dostalibyśmy
+% podwojone wpisy do spisu treści, a~marki zadane tutaj i~tak nie
+% zdołałyby przemigrować do
+% głównej listy pionowej.\changes{0.71}{2009/06/18}{błąd żywej
+% paginy rozdziałów w~układzie dwułamowym wskazany
+% przez Michała Rudolfa}
+% \begin{macrocode}
+ \ifnum0<%
+ \if@twocolumn0\else1\fi
+ \if\mw@HeadingWholeWidth0\else1\fi
+ \if\mw@HeadingBreakAfter1 \else0 \fi
+ \mw@markandtoc\fi
+ \nobreak
+ \vskip\csname\mw@HeadingType @postskip\endcsname
+ \@afterheading
+ }
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\mw@runinheading}
+% To ma służyć do składu \cs{paragraph}ów
+% i~\cs{subparagraph}ów.
+% \begin{macrocode}
+\newcommand*\mw@runinheading{%
+ \addvspace{\csname \mw@HeadingType @preskip\endcsname}%
+ \@nobreakfalse
+ \global\@noskipsectrue
+ \everypar{%
+ \if@noskipsec
+ \global\@noskipsecfalse
+ {\setbox\z@\lastbox}%
+ \clubpenalty\@M
+ \mw@step@sectioning@counter
+ \bgroup\language\l@nohyphenation
+ \normalfont\sectsettings
+ \csname \mw@HeadingType @head\endcsname
+ \egroup
+ \mw@markandtoc
+ \hspace{\csname\mw@HeadingType @postskip\endcsname}%
+ \else
+ \clubpenalty \@clubpenalty
+ \everypar{}%
+ \fi}
+}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsubsection{Szablony nagłówków}
+%
+% \begin{macro}{\FormatBlockHeading}
+%
+% \begin{macrocode}
+\let\@titleindent\z@
+%\let\@titleindent\@parindent
+
+\newcommand*\FormatBlockHeading[1]{%
+ \leftskip\@titleindent
+ #1{\noindent
+ \ifHeadingNumbered\mw@seccntformat\HeadingNumber\fi
+ \ignorespaces\HeadingText\@@par}
+ }
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\FormatHangHeading}
+%
+% \begin{macrocode}
+\newcommand*\FormatHangHeading[1]{%
+ #1{%
+ \@hangfrom{\hskip\@titleindent
+ \ifHeadingNumbered\mw@seccntformat\HeadingNumber\fi}%
+ \ignorespaces\HeadingText\@@par}%
+ }
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\FormatChapterHeading}
+%
+% \begin{macrocode}
+\newcommand*\FormatChapterHeading[3]{%
+ \ifHeadingNumbered
+ #2\HeadingNumber\par\nobreak
+ \vspace{#1}%
+ \fi
+ #3\HeadingText\par\nobreak
+ }
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\FormatRigidChapterHeading}
+%
+% \begin{macrocode}
+\newcommand*\FormatRigidChapterHeading[4]{%
+ \nointerlineskip
+ \vbox to#1{\color@begingroup
+ \vfil
+ \ifHeadingNumbered
+ #3\HeadingNumber\par\nobreak
+ \vspace{#2}%
+ \fi
+ #4\HeadingText\par\nobreak
+ \color@endgroup
+ }%
+}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\FormatRunInHeading}
+%
+% \begin{macrocode}
+\newcommand*\FormatRunInHeading[1]{%
+ \hskip\@titleindent
+ #1{%
+ \ifHeadingNumbered\mw@seccntformat\HeadingNumber\fi
+ \ignorespaces\HeadingText\unskip}%
+}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsubsection{The bright new sectioning API}
+%
+%
+% \begin{macro}{\SetSectionFormatting}
+%
+% \begin{macrocode}
+\newcommand*\SetSectionFormatting[5][default]{%
+ \def\mw@HeadingRunIn{10}\def\mw@HeadingBreakBefore{10}%
+ \def\mw@HeadingBreakAfter{10}\def\mw@HeadingWholeWidth{10}%
+ \mw@processflags#1,\relax
+ \expandafter\def\csname #2\endcsname{\mw@section{#2}}%
+ \expandafter\def\csname #2@preskip\endcsname{#3}%
+ \expandafter\def\csname #2@head\endcsname{#4}%
+ \expandafter\def\csname #2@postskip\endcsname{#5}%
+ \mw@setflags{#2}%
+ }
+% backward compatibility:
+\newcommand*\DeclareSectioningCommand[3][default]{%
+ \SetSectionFormatting[#1]{#2}}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\mw@processflags}
+%
+% \begin{macrocode}
+\def\mw@processflags#1,#2\relax{%
+ \expandafter\ifx\csname sec@@flag@#1\endcsname\relax
+ \ClassError{mwcls}{Unknown sectioning flag `#1'}{}\else
+ \csname sec@@flag@#1\endcsname\fi
+ \if,#2,\else \mw@processflags#2\relax \fi
+ }
+\def\sec@@flag@default{}
+\def\sec@@flag@runin{\def\mw@HeadingRunIn{11}}
+\def\sec@@flag@breakbefore{\def\mw@HeadingBreakBefore{11}}
+\def\sec@@flag@breakafter{\def\mw@HeadingBreakAfter{11}}
+\def\sec@@flag@wholewidth{\def\mw@HeadingWholeWidth{11}}
+% \end{macrocode}
+% \end{macro}
+%
+%
+% \subsubsection{Cz\k{e}\'sci}
+%
+%
+% \begin{macro}{\part}
+%
+% \begin{macrocode}
+%<*article>
+\SetSectionFormatting{part}
+ {3\baselineskip plus \baselineskip}
+ {\FormatChapterHeading{12\p@}%
+ {\large\partname\space}{\LARGE}}
+ {3ex}
+%</article>
+%<*report|book>
+\SetSectionFormatting[breakbefore,breakafter,wholewidth]{part}
+ {0\p@ plus1fil}
+ {\FormatChapterHeading{20\p@}%
+ {\centering\large\partname\space}%
+ {\centering\LARGE}}
+ {0\p@ plus1fil}
+%</report|book>
+% \end{macrocode}
+% \end{macro}
+%
+% \subsubsection{Rozdziały}
+%
+% \begin{macro}{\chapter}
+% Właściwy układ tytułów rozdziałów łatwo uzyskujemy przy pomocy
+% wcześniej przygotowanych szablonów:
+% \begin{macrocode}
+%<*book>
+\SetSectionFormatting[breakbefore,wholewidth]{chapter}
+ {0\p@}
+ {\FormatRigidChapterHeading{6.4\baselineskip}{12\p@}%
+ {\large\@chapapp\space}{\LARGE}}
+ {1.6\baselineskip}
+%</book>
+%<*report>
+\SetSectionFormatting[breakbefore,wholewidth]{chapter}
+ {56\p@}
+ {\FormatBlockHeading{\LARGE}}
+ {24\p@}
+%</report>
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\chapter@prehead}
+% Ponieważ rozdział zawsze zaczyna się od nowej strony,
+% wykorzystujemy makro \cs{chapter@prehead} do dodania stosownych
+% poleceń przed nagłówkiem. Zaczynamy od ustawienia stylu dla
+% ostatniej strony poprzedniego rozdziału na \pstyle{closing} (ale
+% tylko jeśli na tej stronie nie użyto jeszcze polecenia
+% \cs{thispagestyle} --- w~szczególności jednostronicowe rozdziały
+% mają jednak styl \pstyle{opening}). Następnie kończymy stronę,
+% ewentualnie wypuszczamy jednÄ… pustÄ…, wreszcie ustawiamy styl
+% pierwszej strony nowego rozdziału na \pstyle{opening}.
+% \begin{macrocode}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\chapter@toc}
+%
+% \begin{macrocode}
+\newcommand*\chapter@toc{%
+ \ifHeadingNumbered\typeout{\@chapapp\space\thechapter.}\fi
+ \addcontentsline{toc}{chapter}{%
+ \ifHeadingNumbered
+%<report> \protect\numberline{\mw@seccntformat{\HeadingNumber}}%
+%<book> \mw@seccntformat{\@chapapp\ \HeadingNumber}%
+ \fi
+ \HeadingTOCText}%
+ \addtocontents{lof}{\protect\addvspace{10\p@}}%
+ \addtocontents{lot}{\protect\addvspace{10\p@}}%
+ }
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macrocode}
+%
+% \addcontentsline{toc}{chapter}{%
+% %<report> \protect\numberline{%
+% %<book> \@chapapp\
+% \thechapter
+% <report> }%
+% <book> .\enspace
+% \end{macrocode}
+%
+%
+% \subsubsection{Nagłówki niższych rzędów}
+%
+% \begin{macro}{\section}
+%
+% \begin{macrocode}
+\SetSectionFormatting{section}
+ {24\p@\@plus5\p@\@minus2\p@}
+ {\FormatHangHeading{\large}}
+ {10\p@\@plus3\p@}
+%
+\SetSectionFormatting{subsection}
+ {16\p@\@plus4\p@\@minus1\p@}
+ {\FormatHangHeading{}}
+ {6\p@\@plus2\p@}
+%
+\SetSectionFormatting{subsubsection}
+ {10\p@\@plus2\p@\@minus1\p@}
+ {\FormatHangHeading{}}
+ {4\p@\@plus1\p@}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\paragraph}
+% This gives a run-in heading with white space above and to the
+% right of the heading, the title set in |\normalsize\bfseries|.
+% \begin{macrocode}
+\SetSectionFormatting[runin]{paragraph}
+ {\bigskipamount}
+ {\FormatRunInHeading{}}
+ {.5em}
+%
+\SetSectionFormatting[runin]{subparagraph}
+ {\medskipamount}
+ {\FormatRunInHeading{}}
+ {.5em}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Åšrodowiska listowe}
+%
+% \subsubsection{Parametry dotyczÄ…ce wszystkich list}
+%
+% The following commands are used to set the default values for the list
+% environment's parameters. See the \LaTeX{} manual for an explanation
+% of the meanings of the parameters. Defaults for the list
+% environment are set as follows. First, |\rightmargin|,
+% |\listparindent| and |\itemindent| are set to 0pt. Then, for a Kth
+% level list, the command |\@listK| is called, where `K' denotes `i',
+% '`i', ... , `vi'. (I.e., |\@listiii| is called for a third-level
+% list.) By convention, |\@listK| should set |\leftmargin| to
+% |\leftmarginK|.
+%
+% \begin{macro}{\leftmargin}
+% \begin{macro}{\leftmargini}
+% \begin{macro}{\leftmarginii}
+% \begin{macro}{\leftmarginiii}
+% \begin{macro}{\leftmarginiv}
+% \begin{macro}{\leftmarginv}
+% \begin{macro}{\leftmarginvi}
+% When we are in two column mode some of the margins are set somewhat
+% smaller.
+% \begin{macrocode}
+%<*article|report|book>
+\setlength\leftmargini{1\parindent}
+% \end{macrocode}
+% Until the whole of the parameter setting in these files is
+% rationalised, we need to set the value of |\leftmargin| at this
+% outer level.
+% \begin{macrocode}
+\leftmargin \leftmargini
+% \end{macrocode}
+% The following three are calculated so that they are larger than
+% the sum of |\labelsep| and the width of the default labels (which
+% are `(m)', `vii.' and `M.').
+% \begin{macrocode}
+\setlength\leftmarginii {\parindent}
+\setlength\leftmarginiii {\parindent}
+\setlength\leftmarginiv {\parindent}
+\if@twocolumn
+ \setlength\leftmarginv {.5em}
+ \setlength\leftmarginvi {.5em}
+\else
+ \setlength\leftmarginv {1em}
+ \setlength\leftmarginvi {1em}
+\fi
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\labelsep}
+% \begin{macro}{\labelwidth}
+% |\labelsep| is the distance between the label and the text of an
+% item; |\labelwidth| is the width of the label.
+% \begin{macrocode}
+\setlength \labelsep {.5em}
+\setlength \labelwidth{\leftmargini}
+\addtolength\labelwidth{-\labelsep}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\partopsep}
+% When the user leaves a blank line before the environment an extra
+% vertical space of |\partopsep| is inserted, in addition to
+% |\parskip| and |\topsep|.
+% \begin{macrocode}
+\setlength\partopsep{0\p@}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@beginparpenalty}
+% \begin{macro}{\@endparpenalty}
+% These penalties are inserted before and after a list or paragraph
+% environment. They are set to a bonus value to encourage page
+% breaking at these points.
+% \begin{macro}{\@itempenalty}
+% This penalty is inserted between list items.
+% \begin{macrocode}
+\@beginparpenalty -\@lowpenalty
+\@endparpenalty -\@lowpenalty
+\@itempenalty -\@lowpenalty
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\@listi}
+% Parametry dla pierwszego poziomu środowisk listowych, to znaczy
+% list, które nie są zagnieżdżone wewnątrz innych list.
+%
+% W naszej tradycji typograficznej unika się pionowych świateł
+% w~środowiskach listowych. Dlatego wszystkie parametry
+% odpowiedzialne za odstępy pionowe zostały wyzerowane z~wyjątkiem
+% małych odstępów wokół listy jako całości.
+%
+% \begin{macrocode}
+\def\@listi{\leftmargin\leftmargini
+ \parsep \z@
+ \topsep .5\baselineskip plus .25\baselineskip minus
+ .125\baselineskip
+% \partopsep .5\baselineskip
+ \itemsep \z@}
+% \end{macrocode}
+% We initialise the parameters although strictly speaking that
+% is not necessary.
+% \begin{macrocode}
+\@listi
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@listii}
+% \begin{macro}{\@listiii}
+% \begin{macro}{\@listiv}
+% \begin{macro}{\@listv}
+% \begin{macro}{\@listvi}
+% Parametry dla zagnieżdżonych list. Tutaj wszystkie odstępy
+% pionowe wyzerowane.
+% \begin{macrocode}
+\def\@listii {\leftmargin\leftmarginii
+ \labelwidth\leftmarginii
+ \advance\labelwidth-\labelsep
+ \topsep \z@
+ \parsep \z@
+ \itemsep \z@}
+\def\@listiii{\leftmargin\leftmarginiii
+ \labelwidth\leftmarginiii
+ \advance\labelwidth-\labelsep
+ \itemsep \z@}
+\def\@listiv {\leftmargin\leftmarginiv
+ \labelwidth\leftmarginiv
+ \advance\labelwidth-\labelsep}
+\def\@listv {\leftmargin\leftmarginv
+ \labelwidth\leftmarginv
+ \advance\labelwidth-\labelsep}
+\def\@listvi {\leftmargin\leftmarginvi
+ \labelwidth\leftmarginvi
+ \advance\labelwidth-\labelsep}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \subsubsection{Åšrodowisko \env{enumerate}}
+%
+% \begin{macro}{\enumerate}
+% Dokonujemy drobnej zmiany w~definicji środowiska. Pomysł jest
+% mianowicie taki: odstęp zadany przez \cs{topsep} będzie stosowany
+% dla \env{enumerate} tylko, jeśli przed jego początkiem jest pusta
+% linia, czyli jeśli środowisko zaczyna nowy akapit. W~przeciwnym
+% przypadku uznajemy, że tekst wewnątrz \env{enumerate} jest
+% częścią zdania rozpoczętego przed nim i odstęp jest
+% niepotrzebny.
+% \begin{macrocode}
+\def\enumerate{%
+ \ifnum \@enumdepth >\thr@@\@toodeep\else
+ \advance\@enumdepth\@ne
+ \edef\@enumctr{enum\romannumeral\the\@enumdepth}%
+ \expandafter
+ \list
+ \csname label\@enumctr\endcsname
+ {\partopsep\topsep \topsep\z@ %MW
+ \usecounter\@enumctr\def\makelabel##1{##1\hfil}}%
+ \fi}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\enumerate*}
+% Długa wersja \env{enumerate} --- zwykłe ponumerowane akapity.
+% \begin{macrocode}
+\newenvironment*{enumerate*}{%
+ \ifnum \@enumdepth >\thr@@\@toodeep\else
+ \advance\@enumdepth\@ne
+ \edef\@enumctr{enum\romannumeral\the\@enumdepth}%
+ \expandafter
+ \list
+ \csname label\@enumctr\endcsname
+ {\partopsep\topsep \topsep\z@ %MW
+ \leftmargin\z@ \labelwidth\z@
+ \itemindent\@parindent \advance\itemindent\labelsep
+ \usecounter\@enumctr\def\makelabel##1{##1\hfil}}%
+ \fi}
+ {\endlist}
+% \end{macrocode}
+% \end{macro}
+%
+% The enumerate environment uses four counters: \Lcount{enumi},
+% \Lcount{enumii}, \Lcount{enumiii} and \Lcount{enumiv}, where
+% \Lcount{enumN} controls the numbering of the Nth level
+% enumeration.
+%
+% \begin{macro}{\theenumi}
+% \begin{macro}{\theenumii}
+% \begin{macro}{\theenumiii}
+% \begin{macro}{\theenumiv}
+% The counters are already defined in \file{latex.dtx}, but their
+% representation is changed here.
+%
+% \begin{macrocode}
+\renewcommand\theenumi{\@arabic\c@enumi}
+\renewcommand\theenumii{\@alph\c@enumii}
+\renewcommand\theenumiii{\@roman\c@enumiii}
+\renewcommand\theenumiv{\@Alph\c@enumiv}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\labelenumi}
+% \begin{macro}{\labelenumii}
+% \begin{macro}{\labelenumiii}
+% \begin{macro}{\labelenumiv}
+% Wydaje się rozsądne numerowanie pierwszego poziomu wyliczeń
+% 1., 2., 3., \dots a drugiego a), b), c), \dots. [Ale co dalej?]
+% \begin{macrocode}
+\newcommand\labelenumi{\theenumi.}
+\newcommand\labelenumii{\theenumii)}
+\newcommand\labelenumiii{\theenumiii.}
+\newcommand\labelenumiv{\theenumiv.}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\p@enumii}
+% \begin{macro}{\p@enumiii}
+% \begin{macro}{\p@enumiv}
+% The expansion of |\p@enumN||\theenumN| defines the output of a
+% |\ref| command when referencing an item of the Nth level of an
+% enumerated list.
+% \begin{macrocode}
+\renewcommand\p@enumii{\theenumi}
+\renewcommand\p@enumiii{\theenumi\theenumii)}
+\renewcommand\p@enumiv{\p@enumiii\theenumiii}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \subsubsection{Åšrodowisko \env{itemize}}
+%
+% \begin{macro}{\itemize}
+% Zmiana podobna jak dla \env{enumerate}.
+% \begin{macrocode}
+\def\itemize{%
+ \ifnum \@itemdepth >\thr@@\@toodeep\else
+ \advance\@itemdepth\@ne
+ \edef\@itemitem{labelitem\romannumeral\the\@itemdepth}%
+ \expandafter
+ \list
+ \csname\@itemitem\endcsname
+ {\partopsep\topsep \topsep\z@ %MW
+ \def\makelabel##1{##1\hfil}}%
+ \fi}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\itemize*}
+%
+% \begin{macrocode}
+\newenvironment*{itemize*}{%
+ \ifnum \@itemdepth >\thr@@\@toodeep\else
+ \advance\@itemdepth\@ne
+ \edef\@itemitem{labelitem\romannumeral\the\@itemdepth}%
+ \expandafter
+ \list
+ \csname\@itemitem\endcsname
+ {\partopsep\topsep \topsep\z@ %MW
+ \leftmargin\z@ \labelwidth\z@
+ \itemindent\@parindent \advance\itemindent\labelsep
+ \def\makelabel##1{##1\hfil}}%
+ \fi}
+ {\endlist}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\labelitemi}
+% \begin{macro}{\labelitemii}
+% \begin{macro}{\labelitemiii}
+% \begin{macro}{\labelitemiv}
+% Itemization is controlled by four commands: |\labelitemi|,
+% |\labelitemii|, |\labelitemiii|, and |\labelitemiv|, which define
+% the labels of the various itemization levels.
+% \begin{macrocode}
+\newcommand\labelitemi{\textemdash}
+\newcommand\labelitemii{\textemdash}
+\newcommand\labelitemiii{\textemdash}
+\newcommand\labelitemiv{\textemdash}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \subsubsection{Description}
+%
+% \begin{environment}{description}
+%
+% \begin{macrocode}
+\newenvironment{description}
+ {\list{}{\partopsep\topsep \topsep\z@ %MW
+ \labelwidth\z@ \itemindent-\leftmargin
+ \let\makelabel\descriptionlabel}}
+ {\endlist}
+% \end{macrocode}
+% \end{environment}
+%
+% \begin{macro}{\descriptionlabel}
+% To change the formatting of the label, you must redefine
+% |\descriptionlabel|.
+%
+% \changes{v1.2k}{1994/05/06}{Inserted \cs{normalfont}}
+% \changes{v1.2y}{1995/01/31}{made command short}
+% \begin{macrocode}
+\newcommand*\descriptionlabel[1]{\hspace\labelsep
+ \normalfont\bfseries #1}
+%</article|report|book>
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Defining new environments}
+%
+% \subsubsection{Abstract}
+%
+% \begin{environment}{abstract}
+% When we are producing a separate titlepage we also put the
+% abstract on a page of its own. It will be centred vertically on
+% the page.
+%
+% Note that this environment is not defined for books.
+% \changes{v1.3e}{1995/06/19}{Added setting of \cs{@endparpenalty}
+% to avoid page break after abstract heading.}
+% \begin{macrocode}
+% \changes{v1.3m}{1995/10/23}{Added setting of \cs{beginparpenalty} to
+% discourage page break before abstract heading.}
+%<*article|report>
+\if@titlepage
+ \newenvironment{abstract}{%
+ \titlepage
+ \null\vfil
+ \@beginparpenalty\@lowpenalty
+ \begin{center}%
+ \bfseries \abstractname
+ \@endparpenalty\@M
+ \end{center}}%
+ {\par\vfil\null\endtitlepage}
+% \end{macrocode}
+% When we are not making a separate titlepage --the default for the
+% article document class-- we have to check if we are in twocolumn
+% mode. In that case the abstract is as a |\section*|, otherwise
+% the quotation environment is used to typeset the abstract.
+% \begin{macrocode}
+\else
+ \newenvironment{abstract}{%
+ \if@twocolumn
+ \section*{\abstractname}%
+ \else
+ \small
+ \begin{center}%
+ {\bfseries \abstractname\vspace{-.5em}\vspace{\z@}}%
+ \end{center}%
+ \quotation
+ \fi}
+ {\if@twocolumn\else\endquotation\fi}
+\fi
+%</article|report>
+% \end{macrocode}
+% \end{environment}
+%
+% \subsubsection{Verse}
+%
+% \begin{environment}{verse}
+% The verse environment is defined by making clever use of the
+% list environment's parameters. The user types |\\| to end a line.
+% This is implemented by |\let|'ing |\\| equal |\@centercr|.
+%
+% \changes{v1.3j}{1995/08/16}{stop \cs{item} scanning for [ with
+% \cs{relax}}
+% \begin{macrocode}
+\newenvironment{verse}
+ {\let\\\@centercr
+ \list{}{\itemsep \z@
+ \parsep \medskipamount
+ \itemindent -1.5em%
+ \listparindent\itemindent
+ \rightmargin \leftmargin
+ \advance\leftmargin 1.5em}%
+ \item\relax}
+ {\endlist}
+% \end{macrocode}
+% \end{environment}
+%
+% \subsubsection{Quotation}
+%
+% \begin{environment}{quotation}
+% The quotation environment is also defined by making clever use of
+% the list environment's parameters. The lines in the environment
+% are set smaller than |\textwidth|. The first line of a paragraph
+% inside this environment is indented.
+%
+% \changes{v1.3j}{1995/08/16}{stop \cs{item} scanning for [ with
+% \cs{relax}}
+% \begin{macrocode}
+\newenvironment{quotation}
+ {\list{}{\listparindent 1.5em%
+ \itemindent \listparindent
+ \rightmargin \leftmargin
+ \parsep \z@ \@plus\p@}%
+ \item\relax}
+ {\endlist}
+% \end{macrocode}
+% \end{environment}
+%
+% \subsubsection{Quote}
+%
+% \begin{environment}{quote}
+% The quote environment is like the quotation environment except
+% that paragraphs are not indented.
+%
+% \changes{v1.3j}{1995/08/16}{stop \cs{item} scanning for [ with
+% \cs{relax}}
+% \begin{macrocode}
+\newenvironment{quote}
+ {\list{}{\rightmargin\leftmargin}%
+ \item\relax}
+ {\endlist}
+% \end{macrocode}
+% \end{environment}
+%
+% \subsubsection{Åšrodowiska definiowane poleceniem \cs{newtheorem}}
+% W~tym punkcie przedefiniowujemy dwa makra pochodzÄ…ce z~kernela
+% \LaTeX a, aby dodać kropkę po numerze twierdzenia/definicji/czegotam.
+% \begin{macrocode}
+\def\@begintheorem#1#2{\trivlist
+ \item[\hskip \labelsep{\bfseries #1\ #2.}]\itshape}
+\def\@opargbegintheorem#1#2#3{\trivlist
+ \item[\hskip \labelsep{\bfseries #1\ #2.\ (#3)}]\itshape}
+% \end{macrocode}
+%
+% \subsubsection{Titlepage}
+%
+% \begin{environment}{titlepage}
+% In the normal environments, the titlepage environment does nothing
+% but start and end a page, and inhibit page numbers. In the report
+% style, it also resets the page number to one, and then sets it
+% back to one at the end.
+% In two-column style, it still makes a
+% one-column page.
+% \begin{macrocode}
+\newenvironment{titlepage}
+ {%
+%<book> \cleardoublepage
+ \if@twocolumn
+ \@restonecoltrue\onecolumn
+ \else
+ \@restonecolfalse\newpage
+ \fi
+ \thispagestyle{blank}%
+ \setcounter{page}\@ne
+ }%
+ {\if@restonecol\twocolumn \else \newpage \fi
+% \end{macrocode}
+% If we are not in two-side mode the first page after the title page
+% should also get page number 1.
+% \begin{macrocode}
+ \if@twoside\else
+ \setcounter{page}\@ne
+ \fi
+ }
+% \end{macrocode}
+% \end{environment}
+%
+% \subsubsection{Appendix}
+%
+% \begin{macro}{\appendix}
+%
+% The |\appendix| command is not really an environment, it is a
+% macro that makes some changes in the way things are done.
+%
+% In the article document class the |\appendix| command must do the
+% following:
+% \begin{itemize}
+% \item reset the section and subsection counters to zero,
+% \item redefine |\thesection| to produce alphabetic appendix
+% numbers. This redefinition is done globally to ensure that it
+% survives even if |\appendix| is issued within an environment such
+% as \texttt{multicols}.
+% \end{itemize}
+%
+% \changes{1.3z}{1998/09/19}{Redefine \cs{thesection} globally (pr/2862)}
+% \begin{macrocode}
+%<*article>
+\newcommand\appendix{\par
+ \setcounter{section}{0}%
+ \setcounter{subsection}{0}%
+ \gdef\thesection{\@Alph\c@section}}
+%</article>
+% \end{macrocode}
+%
+% In the report and book document classes the |\appendix| command
+% must do the following:
+% \begin{itemize}
+% \item reset the chapter and section counters to zero,
+% \item set |\@chapapp| to |\appendixname| (for messages),
+% \item redefine the chapter counter to produce appendix numbers,
+% \item possibly redefine the |\chapter| command if appendix titles
+% and headings are to look different from chapter titles and
+% headings. This redefinition is done globally to ensure that it
+% survives even if |\appendix| is issued within an environment such
+% as \texttt{multicols}.
+% \end{itemize}
+%
+% \begin{macrocode}
+%<*report|book>
+\newcommand\appendix{\par
+ \setcounter{chapter}{0}%
+ \setcounter{section}{0}%
+ \gdef\@chapapp{\appendixname}%
+ \gdef\thechapter{\@Alph\c@chapter}}
+%</report|book>
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Setting parameters for existing environments}
+%
+% \subsubsection{Array and tabular}
+%
+% \begin{macro}{\arraycolsep}
+% The columns in an array environment are separated by
+% 2|\arraycolsep|.
+% \begin{macrocode}
+\setlength\arraycolsep{5\p@}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\tabcolsep}
+% The columns in an tabular environment are separated by
+% 2|\tabcolsep|.
+% \begin{macrocode}
+\setlength\tabcolsep{6\p@}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\arrayrulewidth}
+% The width of rules in the array and tabular environments is given
+% by\\ |\arrayrulewidth|.
+% \begin{macrocode}
+\setlength\arrayrulewidth{.4\p@}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\doublerulesep}
+% The space between adjacent rules in the array and tabular
+% environments is given by |\doublerulesep|.
+% \begin{macrocode}
+\setlength\doublerulesep{2\p@}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsubsection{Tabbing}
+%
+% \begin{macro}{\tabbingsep}
+% This controls the space that the |\'| command puts in. (See
+% \LaTeX{} manual for an explanation.)
+% \begin{macrocode}
+\setlength\tabbingsep{\labelsep}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsubsection{Minipage}
+%
+% \begin{macro}{\@minipagerestore}
+% The macro |\@minipagerestore| is called upon entry to a minipage
+% environment to set up things that are to be handled differently
+% inside a minipage environment. In the current styles, it does
+% nothing.
+% \end{macro}
+%
+% \begin{macro}{\@mpfootins}
+% Minipages have their own footnotes; |\skip||\@mpfootins| plays
+% same r\^ole for footnotes in a minipage as |\skip||\footins| does
+% for ordinary footnotes.
+%
+% \begin{macrocode}
+\skip\@mpfootins = \skip\footins
+% \end{macrocode}
+% \end{macro}
+%
+% \subsubsection{Framed boxes}
+%
+% \begin{macro}{\fboxsep}
+% The space left by |\fbox| and |\framebox| between the box and the
+% text in it.
+% \begin{macro}{\fboxrule}
+% The width of the rules in the box made by |\fbox| and |\framebox|.
+% \begin{macrocode}
+\setlength\fboxsep{3\p@}
+\setlength\fboxrule{.4\p@}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \subsubsection{Equation and eqnarray}
+%
+% \begin{macro}{\theequation}
+% When within chapters, the equation counter will be reset at
+% the beginning of a new chapter and the equation number will
+% be prefixed by the chapter number.
+% \changes{v1.3u}{1996/10/31}{Added test for non-zero chapter number}
+%
+% This code must follow the |\chapter| definition or, more exactly,
+% the definition of the chapter counter.
+% \begin{macrocode}
+%<article>\renewcommand \theequation {\@arabic\c@equation}
+%<*report|book>
+\@addtoreset {equation}{chapter}
+\renewcommand\theequation
+ {\ifnum \c@chapter>\z@ \thechapter.\fi \@arabic\c@equation}
+%</report|book>
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\jot}
+% |\jot| is the extra space added between lines of an eqnarray
+% environment. The default value is used.
+% \begin{macrocode}
+% \setlength\jot{3pt}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@eqnnum}
+% The macro |\@eqnnum| defines how equation numbers are to appear in
+% equations. Again the default is used.
+%
+% \begin{macrocode}
+% \def\@eqnnum{(\theequation)}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Floating objects}
+%
+% The file \file{latex.dtx} only defines a number of tools with
+% which floating objects can be defined. This is done in the
+% document class. It needs to define the following macros for each
+% floating object of type \texttt{TYPE} (e.g., \texttt{TYPE} =
+% figure).
+%
+% \begin{description}
+% \item[\texttt{\bslash fps@TYPE}]
+% The default placement specifier for floats of type
+% \texttt{TYPE}.
+%
+% \item[\texttt{\bslash ftype@TYPE}]
+% The type number for floats of type \texttt{TYPE}. Each
+% \texttt{TYPE} has associated a unique positive \texttt
+% {TYPE} number, which is a power of two. E.g., figures might
+% have type number 1, tables type number 2, programs type
+% number 4, etc.
+%
+% \item[\texttt{\bslash ext@TYPE}]
+% The file extension indicating the file on which the contents
+% list for float type \texttt{TYPE} is stored. For example,
+% |\ext@figure| = `lof'.
+%
+% \item[\texttt{\bslash fnum@TYPE}]
+% A macro to generate the figure number for a caption. For
+% example, |\fnum@TYPE| == `Figure |\thefigure|'.
+%
+% \item[\texttt{\bslash @makecaption}{\meta{num}}{\meta{text}}]
+% A macro to make a caption, with \meta{num} the value produced
+% by |\fnum@...| and \meta{text} the text of the caption. It
+% can assume it's in a |\parbox| of the appropriate width.
+% This will be used for \emph{all} floating objects.
+%
+% \end{description}
+%
+% The actual environment that implements a floating object such as
+% a figure is defined using the macros |\@float| and |\end@float|,
+% which are defined in \file{latex.dtx}.
+%
+% An environment that implements a single column floating object is
+% started with |\@float{|\texttt{TYPE}|}[|\meta{placement}|]| of type
+% \texttt{TYPE} with \meta{placement} as the placement specifier.
+% The default value of \meta{PLACEMENT} is defined by |\fps@TYPE|.
+%
+% The environment is ended by |\end@float|. E.g., |\figure| ==
+% |\@float|{figure}, |\endfigure| == |\end@float|.
+%
+% \begin{macro}{\@floatboxreset}
+% Przedefiniowujemy standardowe makro \cs{@floatboxreset} aby
+% zmienić stopień (a~może i~inne atrybuty) pisma w~środowiskach
+% przemieszczalnych.
+% \begin{macrocode}
+\def\@floatboxreset{%
+ \reset@font
+ \normalsize
+ \@setminipage
+ \csname\@captype settings\endcsname
+}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsubsection{Figure}
+%
+% Here is the implementation of the figure environment.
+%
+% \begin{macro}{\c@figure}
+% First we have to allocate a counter to number the figures.
+%
+% In the report and book document classes figures within chapters are
+% numbered per chapter.
+% \changes{v1.3u}{1996/10/31}{Added test for non-zero chapter number}
+% \begin{macrocode}
+%<*article>
+\newcounter{figure}
+\renewcommand \thefigure {\@arabic\c@figure}
+%</article>
+%<*report|book>
+\newcounter{figure}[chapter]
+\renewcommand \thefigure
+ {\ifnum \c@chapter>\z@ \thechapter.\fi \@arabic\c@figure}
+%</report|book>
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\fps@figure}
+% \begin{macro}{\ftype@figure}
+% \begin{macro}{\ext@figure}
+% \begin{macro}{\num@figure}
+% Here are the parameters for the floating objects of type `figure'.
+% \begin{macrocode}
+\def\fps@figure{tbp}
+\def\ftype@figure{1}
+\def\ext@figure{lof}
+\def\fnum@figure{\figurename~\thefigure}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{environment}{figure}
+% \begin{environment}{figure*}
+% And the definition of the actual environment. The form with the
+% |*| is used for double column figures.
+% \begin{macrocode}
+\newenvironment{figure}
+ {\@float{figure}}
+ {\end@float}
+\newenvironment{figure*}
+ {\@dblfloat{figure}}
+ {\end@dblfloat}
+% \end{macrocode}
+% \end{environment}
+% \end{environment}
+%
+% \subsubsection{Table}
+%
+% Here is the implementation of the table environment. It is very
+% much the same as the figure environment.
+%
+% \begin{macro}{\c@table}
+% First we have to allocate a counter to number the tables.
+%
+% In the report and book document classes tables within chapters are
+% numbered per chapter.
+% \changes{v1.3u}{1996/10/31}{Added test for non-zero chapter number}
+% \begin{macrocode}
+%<*article>
+\newcounter{table}
+\renewcommand\thetable{\@arabic\c@table}
+%</article>
+%<*report|book>
+\newcounter{table}[chapter]
+\renewcommand \thetable
+ {\ifnum \c@chapter>\z@ \thechapter.\fi \@arabic\c@table}
+%</report|book>
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\fps@table}
+% \begin{macro}{\ftype@table}
+% \begin{macro}{\ext@table}
+% \begin{macro}{\num@table}
+% Here are the parameters for the floating objects of type `table'.
+% \begin{macrocode}
+\def\fps@table{tbp}
+\def\ftype@table{2}
+\def\ext@table{lot}
+\def\fnum@table{\tablename~\thetable}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{environment}{table}
+% \begin{environment}{table*}
+% And the definition of the actual environment. The form with the
+% |*| is used for double column tables.
+% \begin{macrocode}
+\newenvironment{table}
+ {\@float{table}}
+ {\end@float}
+\newenvironment{table*}
+ {\@dblfloat{table}}
+ {\end@dblfloat}
+% \end{macrocode}
+% \end{environment}
+% \end{environment}
+%
+% \subsubsection{Polecenie \sc{caption}}
+%
+% The |\caption| command calls |\@makecaption| to format the
+% caption of floating objects. It gets two arguments,
+% \meta{number}, the number of the floating object and \meta{text},
+% the text of the caption. Usually \meta{number} contains a string
+% such as `Figure 3.2'. The macro can assume it is called inside a
+% |\parbox| of right width, with |\normalsize|.
+%
+% \begin{macro}{\centeredlast}
+% Przy składzie podpisów będziemy stosować następujące makro
+% składające akapit tak, że jego ostatnia linia jest scentrowana.
+% \begin{macrocode}
+\def\centeredlast{%
+ \let\\\@centercr
+ \rightskip\z@\@plus-.5fil
+ \leftskip\z@\@plus.5fil
+ \parindent\z@
+ \parfillskip\@flushglue
+ }
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\abovecaptionskip}
+% \begin{macro}{\belowcaptionskip}
+% These lengths contain the amount of white space to leave above
+% and below the caption.
+% \begin{macrocode}
+\newlength\abovecaptionskip
+\newlength\belowcaptionskip
+\setlength\abovecaptionskip{.5\baselineskip}
+\setlength\belowcaptionskip{.5\baselineskip}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\@caption}
+% Modyfikujemy standardowe makro \cs{@caption} tak, aby w~spisach
+% rysunków i~tabel pojawiała się kropka po numerze obiektu.
+% Zmieniamy też stopień pisma.
+% \begin{macrocode}
+\long\def\@caption#1[#2]#3{%
+ \par
+ \addcontentsline{\csname ext@#1\endcsname}{#1}%
+ {\protect\numberline{\csname the#1\endcsname.}{\ignorespaces #2}}%
+ \begingroup
+ \@parboxrestore
+ \if@minipage
+ \@setminipage
+ \fi
+ \captionsettings
+ \@makecaption{\csname fnum@#1\endcsname}{\ignorespaces #3}\par
+ \endgroup}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\mw@caption@hyperref}
+% Niestety pakiet hyperref przedefiniowuje caption dlatego musimy
+% zasłonić jego redefinicję kolejną redefinicją zawierającą wersję
+% hyperrefowÄ… z dodanÄ… kropkÄ… i z \cs{captionsettings}.
+% \begin{macrocode}
+\long\def\mw@caption@hyperref#1[#2]#3{%
+ \expandafter\ifx\csname if@capstart\expandafter\endcsname
+ \csname iftrue\endcsname
+ \global\let\@currentHref\hc@currentHref
+ \else
+ \hyper@makecurrent{\@captype}%
+ \fi
+ \@ifundefined{NR@gettitle}{%
+ \def\@currentlabelname{#2}%
+ }{%
+ \NR@gettitle{#2}%
+ }%
+ \par\addcontentsline{\csname ext@#1\endcsname}{#1}{%
+ \protect\numberline{\csname the#1\endcsname.}{\ignorespaces #2}%
+ }%
+ \begingroup
+ \@parboxrestore
+ \if@minipage
+ \@setminipage
+ \fi
+ \captionsettings
+ \expandafter\ifx\csname if@capstart\expandafter\endcsname
+ \csname iftrue\endcsname
+ \global\@capstartfalse
+ \@makecaption{\csname fnum@#1\endcsname}{\ignorespaces#3}%
+ \else
+ \@makecaption{\csname fnum@#1\endcsname}{%
+ \ignorespaces
+ \ifHy@nesting
+ \expandafter\hyper@@anchor\expandafter{\@currentHref}{#3}%
+ \else
+ \Hy@raisedlink{%
+ \expandafter\hyper@@anchor\expandafter{%
+ \@currentHref
+ }{\relax}%
+ }%
+ #3%
+ \fi
+ }%
+ \fi
+ \par
+ \endgroup
+}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\@makecaption}
+% The definition of this macro is |\long| in order to allow more
+% then one paragraph in a caption.
+% \begin{macrocode}
+\long\def\@makecaption#1#2{%
+ \addvspace\abovecaptionskip
+% \end{macrocode}
+% Formujemy podpis odmiennie niż w~klasach standardowych: jako
+% akapit ze scentrowaną ostatnią (w~szczególności jedyną) linią.
+% \begin{macrocode}
+ \bgroup\centeredlast
+ #1.\enspace#2\par
+ \egroup
+ \vskip\belowcaptionskip}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Font changing}
+%
+% Here we supply the declarative font changing commands that were
+% common in \LaTeX\ version 2.09 and earlier. These commands work
+% in text mode \emph{and} in math mode. They are provided for
+% compatibility, but one should start using the |\text...| and
+% |\math...| commands instead. These commands are defined using
+% |\DeclareTextFontCommand|, a command with three arguments: the
+% user command to be defined; \LaTeX\ commands to execute in text
+% mode and \LaTeX\ commands to execute in math mode.
+%
+% \begin{macro}{\rm}
+% \changes{v1.0f}{1993/12/08}{Macro added}
+% \begin{macro}{\tt}
+% \changes{v1.0f}{1993/12/08}{Macro added}
+% \begin{macro}{\sf}
+% \changes{v1.0f}{1993/12/08}{Macro added}
+%
+% The commands to change the family. When in compatibility mode we
+% select the `default' font first, to get \LaTeX2.09 behviour.
+% \begin{macrocode}
+\DeclareOldFontCommand{\rm}{\normalfont\rmfamily}{\mathrm}
+\DeclareOldFontCommand{\sf}{\normalfont\sffamily}{\mathsf}
+\DeclareOldFontCommand{\tt}{\normalfont\ttfamily}{\mathtt}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\bf}
+% The command to change to the bold series. One should use
+% |\mdseries| to explicitly switch back to medium series.
+% \begin{macrocode}
+\DeclareOldFontCommand{\bf}{\normalfont\bfseries}{\mathbf}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\sl}
+% \begin{macro}{\it}
+% \begin{macro}{\sc}
+%
+% And the commands to change the shape of the font. The slanted and
+% small caps shapes are not available by default as math alphabets,
+% so those changes do nothing in math mode. However, we do warn the
+% user that the selection will not have any effect.One should use
+% |\upshape| to explicitly change back to the upright shape.
+% \begin{macrocode}
+\DeclareOldFontCommand{\it}{\normalfont\itshape}{\mathit}
+\DeclareOldFontCommand{\sl}{\normalfont\slshape}{\@nomath\sl}
+\DeclareOldFontCommand{\sc}{\normalfont\scshape}{\@nomath\sc}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\cal}
+% \begin{macro}{\mit}
+%
+% The commands |\cal| and |\mit| should only be used in math mode,
+% outside math mode they have no effect. Currently the New Font
+% Selection Scheme defines these commands to generate warning
+% messages. Therefore we have to define them `by hand'.
+% \begin{macrocode}
+\DeclareRobustCommand*\cal{\@fontswitch\relax\mathcal}
+\DeclareRobustCommand*\mit{\@fontswitch\relax\mathnormal}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \section{Cross Referencing}
+% \subsection{Table of Contents, etc.}
+%
+% A |\section| command writes a
+% |\contentsline{section}{|\meta{title}|}{|\meta{page}|}| command
+% on the \file{.toc} file, where \meta{title} contains the
+% contents of the entry and \meta{page} is the page number. If
+% sections are being numbered, then \meta{title} will be of the
+% form |\numberline{|\meta{num}|}{|\meta{heading}|}| where
+% \meta{num} is the number produced by |\thesection|. Other
+% sectioning commands work similarly.
+%
+% A |\caption| command in a `figure' environment writes
+%
+% |\contentsline{figure}{\numberline{|\meta{num}|}{|%
+% \meta{caption}|}}{|\meta{page}|}|
+%
+% on the .\file{lof} file, where \meta{num} is the number produced
+% by |\thefigure| and \meta{caption} is the figure caption. It
+% works similarly for a `table' environment.
+%
+% The command |\contentsline{|\meta{name}|}| expands to
+% |\l@|\meta{name}. So, to specify the table of contents, we must
+% define |\l@chapter|, |\l@section|, |\l@subsection|, ... ; to
+% specify the list of figures, we must define |\l@figure|; and so
+% on. Most of these can be defined with the |\@dottedtocline|
+% command, which works as follows.
+%
+% |\@dottedtocline{|\meta{level}|}{|\meta{indent}|}{|^^A
+% \meta{numwidth}|}{|^^A
+% \meta{title}|}{|\meta{page}|}|
+%
+% \begin{description}
+% \item[\meta{level}] An entry is produced only if\meta{ level}
+% $<=$ value of the \Lcount{tocdepth} counter. Note,
+% |\chapter| is level 0, |\section| is level 1, etc.
+% \item[\meta{indent}] The indentation from the outer left margin
+% of the start of the contents line.
+% \item[\meta{numwidth}] The width of a box in which the section
+% number is to go, if \meta{title} includes a |\numberline|
+% command.
+% \end{description}
+%
+% \begin{macro}{\@pnumwidth}
+% \begin{macro}{\@tocrmarg}
+% \begin{macro}{\@dotsep}
+% This command uses the following three parameters, which are set
+% with a |\newcommand| (so em's can be used to make them depend upon
+% the font).
+% \begin{description}
+% \item[\texttt{\bslash @pnumwidth}] The width of a box in which the
+% page number is put.
+% \item[\texttt{\bslash @tocrmarg}] The right margin for multiple
+% line entries. One wants |\@tocrmarg| $\ge$ |\@pnumwidth|
+% \item[\texttt{\bslash @dotsep}] Separation between dots, in mu
+% units. Should be defined as a number like 2 or 1.7
+% \end{description}
+%
+% \begin{macrocode}
+\newcommand\@pnumwidth{1.55em}
+\newcommand\@tocrmarg{2.55em plus 2cm}
+\newcommand\@dotsep{4.5}
+%<article>\setcounter{tocdepth}{3}
+%<!article>\setcounter{tocdepth}{2}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \subsubsection{Spis treści}
+%
+% \begin{macro}{\tableofcontents}
+% Spis treści w wersji report i book jest zawsze składany jednołamowo.
+%
+% \begin{macrocode}
+\newcommand\tableofcontents{%
+%<*report|book>
+ \if@twocolumn
+ \@restonecoltrue\onecolumn
+ \else
+ \@restonecolfalse
+ \fi
+%</report|book>
+% \end{macrocode}
+% The title is set using the |\chapter*| command, making sure that
+% the running head --if one is required-- contains the right
+% information.
+% \begin{macrocode}
+ {\@tempcnta=\c@tocdepth
+ \c@tocdepth=-1
+%<report|book>\chapter*%
+%<article> \section*%
+ {\contentsname}%
+ \protect\@mkboth{\contentsname}{\contentsname}%
+ \c@tocdepth=\@tempcnta
+% \end{macrocode}
+% The the actual table of contents is made by calling
+% |\@starttoc{toc}|. After that we restore twocolumn mode if
+% necessary.
+% \begin{macrocode}
+ \secondarysize
+ \gdef\previous@toc@level{-1000}%
+ \@starttoc{toc}}%
+%<!article> \if@restonecol\twocolumn\fi
+ }
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\mw@tocskip}
+% Do dodawania odstępu w~spisie treści. Korzysta z~zapamiętanego
+% poziomu poprzedniej pozycji, aby stosownie dobrać grzywnę za
+% złamanie przed danym elementem. W~szczególności zabrania
+% łamania, jeżeli poprzedni element był z~wyższego poziomu.\\
+% 1 -- poziom, 2 -- odstęp pionowy
+% \begin{macrocode}
+\def\mw@tocskip#1#2{%
+ \ifnum#1>\previous@toc@level
+ \nobreak
+ \else\ifnum#1<\previous@toc@level
+ \addpenalty\@secpenalty % czy to dobra wartosc?
+ \fi\fi
+ \gdef\previous@toc@level{#1}%
+ \vskip #2\relax
+}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\mw@tocline}
+% TrochÄ™ podrasowane \cs{@dottedtocline}. Drugi parametr to
+% wcięcie pierwszego wiersza, trzeci to wcięcie
+% ewentualnych następnych wierszy tej pozycji. Oba wcięcia liczone
+% od marginesu (inaczej niż w~oryginale).
+% \begin{macrocode}
+\def\mw@tocline#1#2#3#4#5{%
+ \ifnum #1>\c@tocdepth \else
+ \mw@tocskip{#1}{\z@ \@plus.2\p@}%
+ {\leftskip #3\relax
+ \@tempdima #3\relax
+ \advance\@tempdima -#2\relax
+ \rightskip \@tocrmarg \parfillskip -\rightskip
+ \interlinepenalty\@M
+ \noindent\kern-\@tempdima{\ignorespaces#4}\nobreak
+ \leaders\hbox{$\m@th
+ \mkern \@dotsep mu\hbox{.}\mkern \@dotsep
+ mu$}\hfill
+ \nobreak
+ \hb@xt@\@pnumwidth{\hfil\normalfont \normalcolor #5}%
+ \par}%
+ \fi}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\SetTOCIndents}
+% Do wyznaczenia właściwych wartości wcięć posłuży następujące makro:
+% \begin{macrocode}
+\newcommand*\SetTOCIndents[1]{\bgroup
+ \reset@font\secondarysize
+ \setbox\@tempboxa\hbox{}%
+ \set@tocindentsX
+%<article>{i}%
+%<!article>{}%
+#1\relax
+ \egroup
+ }
+\def\set@tocindentsX#1#2{%
+ \ifx\relax#2\expandafter\@gobble\else
+ \setbox\@tempboxa\hbox{\unhbox\@tempboxa#2}%
+ \expandafter\xdef\csname @tocindent#1\endcsname{\the\wd\@tempboxa}%
+ \expandafter\set@tocindentsX
+ \fi
+ {#1i}%
+ }
+% \end{macrocode}
+% Przy jego pomocy wyznaczamy wcięcia tak, aby mieściły się
+% rozsądne numery podpunktów. W~klasie article zaczynamy od
+% poziomu \cs{section} więc jest o~jeden mniej. \cs{part} rządzi
+% się swoimi prawami --- tutaj nieuwzględnione.
+% \begin{macrocode}
+%<article>\SetTOCIndents{{}{\bf9.\enspace}{9.10.\enspace}{9.9.10.\enspace}{\quad}{\quad}}
+%<report>\SetTOCIndents{{}{\bf9.\enspace}{9.10.\enspace}{9.9.10.\enspace}{9.9.9.10\enspace}{\quad}{\quad}}
+%<book>\SetTOCIndents{{}{\quad}{9.10.\enspace}{9.9.10.\enspace}{9.9.9.10.\enspace}{\quad}{\quad}}
+% \end{macrocode}
+% \end{macro}
+% \begin{macro}{\numberline}
+%
+% \begin{macrocode}
+\def\numberline#1{\hb@xt@\@tempdima{#1\hfil}\ignorespaces}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\l@part}
+% Each sectioning command needs an additional macro to format its
+% entry in the table of contents, as described above. The macro for
+% the entry for parts is defined in a special way.
+%
+% First we make sure that if a pagebreak should occur, it occurs
+% \emph{before} this entry. Also a little whitespace is added and a
+% group begun to keep changes local.
+% \begin{macrocode}
+\newcommand*\l@part[2]{%
+ \ifnum \c@tocdepth >-2\relax
+ \mw@tocskip{-1}{.6\baselineskip}%
+ \begingroup
+% \end{macrocode}
+% We set |\parindent| to 0pt and use |\rightskip| to leave
+% enough room for the pagenumbers.\footnote{^^A
+% We should really set \cs{rightskip} to \cs{@tocrmarg} instead
+% of \cs{@pnumwidth} (no version of {\LaTeX} ever did this),
+% otherwise the \cs{rightskip} is too small.
+% Unfortunately this can't be changed in {\LaTeXe} as we don't
+% want to create different versions of {\LaTeXe} which produce
+% different typset output unless this is absolutely necessary;
+% instead we suspend it for \LaTeX3.}
+% To prevent overfull box messages the |\parfillskip| is set to a
+% negative value.
+% \begin{macrocode}
+ \parindent \z@ \rightskip \@pnumwidth
+ \parfillskip -\@pnumwidth
+% \end{macrocode}
+% Now we can set the entry, in a large bold font. We make sure to
+% leave vertical mode, set the part title and add the pagenumber,
+% set flush right.
+% \begin{macrocode}
+ {\leavevmode\normalsize
+ \def\numberline##1{##1\enspace}%
+ \hfil\bfseries #1\hfil\null %\hb@xt@\@pnumwidth{\hss #2}%
+ }\par
+% \end{macrocode}
+% Prevent a pagebreak immediately after this entry, but use
+% |\everypar| to reset the |\if@nobreak| switch. Finally we close
+% the group.
+% \begin{macrocode}
+ \nobreak
+ \global\@nobreaktrue
+ \everypar{\global\@nobreakfalse\everypar{}}%
+ \endgroup
+ \addvspace{.4\baselineskip}%
+ \fi}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macrocode}
+%<*report|book>
+\newcommand*\l@chapter[2]{\addvspace{.3\baselineskip}%
+ \mw@tocline{0}{\@tocindent}{\@tocindenti}{\textbf{#1}}{#2}%
+ \addvspace{.2\baselineskip}}
+\newcommand*\l@section{\mw@tocline{1}{\@tocindenti}{\@tocindentii}}
+%</report|book>
+% \end{macrocode}
+%
+% \begin{macro}{\l@subsection}
+% \begin{macro}{\l@subsubsection}
+% \begin{macro}{\l@paragraph}
+% \begin{macro}{\l@subparagraph}
+% All lower level entries are defined using the macro
+% |\mw@tocline| (see above).
+% \begin{macrocode}
+%<*article>
+\newcommand*\l@section[2]{\addvspace{.3\baselineskip}%
+ \mw@tocline{1}{\@tocindenti}{\@tocindentii}{\textbf{#1}}{#2}%
+ }
+%</article>
+\newcommand*\l@subsection{\mw@tocline{2}{\@tocindentii}{\@tocindentiii}}
+\newcommand*\l@subsubsection{\mw@tocline{3}{\@tocindentiii}{\@tocindentiiii}}
+\newcommand*\l@paragraph{\mw@tocline{4}{\@tocindentiiii}{\@tocindentiiiii}}
+\newcommand*\l@subparagraph{\mw@tocline{5}{\@tocindentiiiii}{\@tocindentiiiiii}}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \subsubsection{List of figures}
+%
+% \begin{macro}{\listoffigures}
+% This macro is used to request that \LaTeX{} produces a list of
+% figures. It is very similar to |\tableofcontents|.
+%
+% \begin{macrocode}
+\newcommand\listoffigures{%
+%<*report|book>
+ \if@twocolumn
+ \@restonecoltrue\onecolumn
+ \else
+ \@restonecolfalse
+ \fi
+ \chapter*{\listfigurename}
+%</report|book>
+%<article> \section*{\listfigurename}
+ {\secondarysize
+ \gdef\previous@toc@level{-1000}%
+ \@starttoc{lof}}%
+%<report|book> \if@restonecol\twocolumn\fi
+ }
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\l@figure}
+% This macro produces an entry in the list of figures.
+% W~klasie report i~book rysunki są numerowane w~obrębie
+% rozdziałów, więc numery zajmują więcej miejsca. [Czy to są
+% rozsądne wartości???]
+% \begin{macrocode}
+%<article>\newcommand*\l@figure{\mw@tocline{1}{0pt}{1.5em}}
+%<report|book>\newcommand*\l@figure{\mw@tocline{1}{0pt}{2.5em}}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsubsection{List of tables}
+%
+% \begin{macro}{\listoftables}
+% This macro is used to request that \LaTeX{} produces a list of
+% tables. It is very similar to |\tableofcontents|.
+%
+% \begin{macrocode}
+\newcommand\listoftables{%
+%<*report|book>
+ \if@twocolumn
+ \@restonecoltrue\onecolumn
+ \else
+ \@restonecolfalse
+ \fi
+ \chapter*{\listtablename}
+%</report|book>
+%<article> \section*{\listtablename}
+ {\secondarysize
+ \gdef\previous@toc@level{-1000}%
+ \@starttoc{lot}}%
+%<report|book> \if@restonecol\twocolumn\fi
+ }
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\l@table}
+% This macro produces an entry in the list of tables.
+% \begin{macrocode}
+\let\l@table\l@figure
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Bibliography}
+%
+% \begin{macro}{\bibindent}
+% The ``open'' bibliography format uses an indentation of
+% |\bibindent|.
+% \begin{macrocode}
+\newdimen\bibindent
+\setlength\bibindent{1.5em}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{environment}{thebibliography}
+% The `thebibliography' environment executes the following
+% commands:
+%
+% |\renewcommand{\newblock}{\hskip.11em \@plus.33em \@minus.07em}|\\
+% --- Defines the ``closed'' format, where the blocks (major units
+% of information) of an entry run together.
+%
+% |\sloppy| --- Used because it's rather hard to do line breaks in
+% bibliographies,
+%
+% |\sfcode`\.=1000\relax| ---
+% Causes a `.' (period) not to produce an end-of-sentence space.
+%
+% The implementation of this environment is based on the generic
+% list environment. It uses the \Lcount{enumiv} counter internally
+% to generate the labels of the list.
+%
+% When an empty `thebibliography' environment is found, a warning
+% is issued.
+% \begin{macrocode}
+\newenvironment{thebibliography}[1]{%
+ \def
+%<article> \sectionmark
+%<!article> \chaptermark
+ ##1{\@mkboth{##1}{##1}}%
+%<article> \section*{\refname}%
+%<!article> \chapter*{\bibname}%
+ \list{\@biblabel{\@arabic\c@enumiv}}%
+ {\settowidth\labelwidth{\@biblabel{#1}}%
+ \leftmargin\labelwidth
+ \advance\leftmargin\labelsep
+ \@openbib@code
+ \usecounter{enumiv}%
+ \let\p@enumiv\@empty
+ \renewcommand\theenumiv{\@arabic\c@enumiv}%
+ \secondarysize}%
+ \sloppy
+% \end{macrocode}
+% This is setting the normal (non-infinite) value of
+% |\clubpenalty| for the whole of this environment,
+% so we must reset its stored value also.
+% \begin{macrocode}
+% \clubpenalty4000
+% \@clubpenalty \clubpenalty
+% \widowpenalty4000
+ \sfcode`\.\@m}
+ {\def\@noitemerr
+ {\@latex@warning{Empty `thebibliography' environment}}%
+ \endlist}
+% \end{macrocode}
+% \end{environment}
+%
+% \begin{macro}{\newblock}
+% The default definition for |\newblock| is to produce a small space.
+% \begin{macrocode}
+\newcommand\newblock{\hskip .11em\@plus.33em\@minus.07em}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@openbib@code}
+% The default definition for |\@openbib@code| is to do nothing.
+% It will be changed by the \Lopt{openbib} option.
+% \begin{macrocode}
+\let\@openbib@code\@empty
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@biblabel}
+% The label for a |\bibitem[...]| command is produced by this
+% macro. The default from \file{latex.dtx} is used.
+% \begin{macrocode}
+% \renewcommand*{\@biblabel}[1]{[#1]\hfill}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@cite}
+% The output of the |\cite| command is produced by this macro. The
+% default from \file{latex.dtx} is used.
+% \begin{macrocode}
+% \renewcommand*{\@cite}[1]{[#1]}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{The index}
+%
+% \begin{environment}{theindex}
+% The environment `theindex' can be used for indices. It makes an
+% index with two columns, with each entry a separate paragraph. At
+% the user level the commands |\item|, |\subitem| and |\subsubitem|
+% are used to produce index entries of various levels. When a new
+% letter of the alphabet is encountered an amount of |\indexspace|
+% white space can be added.
+%
+%
+% \changes{v1.0g}{1993/12/09}{Moved the setting of
+% \cs{@restonecoltrue}}
+% \begin{macrocode}
+\newenvironment{theindex}
+ {\if@twocolumn
+ \@restonecolfalse
+ \else
+ \@restonecoltrue
+ \fi
+ \columnseprule \z@
+ \columnsep 35\p@
+%<article> \if@twocolumn\section*{\indexname}\else
+ \twocolumn
+%<article> [\section*{\indexname}]\fi
+%<!article> \chapter*{\indexname}%
+ \@mkboth{\indexname}{\indexname}%
+ \thispagestyle{opening}\parindent\z@
+ \parskip\z@ \@plus .3\p@\relax
+ \let\item\@idxitem
+ \secondarysize}
+% \end{macrocode}
+% When the document continues after the index and it was a one
+% column document we have to switch back to one column after the
+% index.
+% \begin{macrocode}
+ {\if@restonecol\onecolumn\else
+%<!article> \clearpage
+ \fi}
+% \end{macrocode}
+% \end{environment}
+%
+% \begin{macro}{\@idxitem}
+% \begin{macro}{\subitem}
+% \begin{macro}{\subsubitem}
+% These macros are used to format the entries in the index. ^^AA ???
+% \begin{macrocode}
+\newcommand\@idxitem{\par\hangindent 40\p@}
+\newcommand\subitem{\@idxitem \hspace*{20\p@}}
+\newcommand\subsubitem{\@idxitem \hspace*{30\p@}}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\indexspace}
+% The amount of white space that is inserted between `letter
+% blocks' in the index.
+% \begin{macrocode}
+\newcommand\indexspace{\par \vskip 10\p@ \@plus5\p@ \@minus3\p@\relax}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Footnotes}
+%
+% \begin{macro}{\footnoterule}
+% Polscy redaktorzy techniczni uwielbiajÄ… kreskÄ™ odzdzielajÄ…cÄ…
+% przypisy o długości 4 cycer:
+% \begin{macrocode}
+\renewcommand\footnoterule{%
+ \kern-3\p@
+ \hrule\@width4pc
+ \kern2.6\p@}
+% \end{macrocode}
+% (Zgodnie z~\LaTeX owÄ… konwencjÄ… makro \cs{footnoterule} ma
+% produkować materiał w~sumie o zerowej wysokości).
+% \end{macro}
+%
+% \begin{macro}{\c@footnote}
+% Footnotes are numbered within chapters in the report and book
+% document styles.
+% \begin{macrocode}
+%<!article>\@addtoreset{footnote}{chapter}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@makefntext}
+% The footnote mechanism of \LaTeX{} calls the macro |\@makefntext|
+% to produce the actual footnote. The macro gets the text of the
+% footnote as its argument and should use |\@thefnmark| as the mark
+% of the footnote. The macro |\@makefntext|is called when
+% effectively inside a |\parbox| of width |\columnwidth| (i.e.,
+% with |\hsize| = |\columnwidth|).
+%
+% An example of what can be achieved is given by the following piece
+% of \TeX\ code.
+% \begin{verbatim}
+% \newcommand\@makefntext[1]{%
+% \@setpar{\@@par
+% \@tempdima = \hsize
+% \advance\@tempdima-10pt
+% \parshape \@ne 10pt \@tempdima}%
+% \par
+% \parindent 1em\noindent
+% \hbox to \z@{\hss\@makefnmark}#1}
+% \end{verbatim}
+% The effect of this definition is that all lines of the footnote
+% are indented by 10pt, while the first line of a new paragraph is
+% indented by 1em. To change these dimensions, just substitute the
+% desired value for `10pt' (in both places) or `1em'. The mark is
+% flushright against the footnote.
+%
+% In these document classes we use a simpler macro, in which the
+% footnote text is set like an ordinary text paragraph, with no
+% indentation except on the first line of a paragraph, and the
+% first line of the footnote. Thus, all the macro must do is set
+% |\parindent| to the appropriate value for succeeding paragraphs
+% and put the proper indentation before the mark.
+%
+% \begin{macrocode}
+\newcommand\@makefntext[1]{%
+ \parindent\@parindent
+ \indent\@makefnmark\enspace#1}
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}{\@makefnmark}
+% The footnote markers that are printed in the text to point to the
+% footnotes should be produced by the macro |\@makefnmark|. We use
+% the default definition for it.
+% \begin{macrocode}
+%\renewcommand\@makefnmark{\hbox{\@textsuperscript
+% {\normalfont\@thefnmark}}}
+% \end{macrocode}
+% \end{macro}
+%
+% \section{Initialization}
+%
+% \subsection{Words}
+%
+% This document class is for documents prepared in the English language.
+% To prepare a version for another language, various English words must
+% be replaced. All the English words that require replacement are
+% defined below in command names. These commands may be redefined in
+% any class or package that is customising \LaTeX\ for use with
+% non-English languages.
+% \changes{v1.3h}{1995/07/20}{Split up to save save stack /1742}
+%
+% \begin{macro}{\contentsname}
+% \begin{macro}{\listfigurename}
+% \begin{macro}{\listtablename}
+% \begin{macrocode}
+\newcommand\contentsname{Contents}
+\newcommand\listfigurename{List of Figures}
+\newcommand\listtablename{List of Tables}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\refname}
+% \begin{macro}{\bibname}
+% \begin{macro}{\indexname}
+% \begin{macrocode}
+%<article>\newcommand\refname{References}
+%<report|book>\newcommand\bibname{Bibliography}
+\newcommand\indexname{Index}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\figurename}
+% \begin{macro}{\tablename}
+% \begin{macrocode}
+\newcommand\figurename{Figure}
+\newcommand\tablename{Table}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
+% \begin{macro}{\partname}
+% \begin{macro}{\chaptername}
+% \begin{macro}{\appendixname}
+% \begin{macro}{\abstractname}
+% \begin{macrocode}
+\newcommand\partname{Part}
+%<report|book>\newcommand\chaptername{Chapter}
+\newcommand\appendixname{Appendix}
+%<!book>\newcommand\abstractname{Abstract}
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+%
+% \subsection{Date}
+%
+% \begin{macro}{\today}
+% This macro uses the \TeX\ primitives |\month|, |\day| and |\year|
+% to provide the date of the \LaTeX-run.
+%
+% At |\begin{document}| this definition will be optimised
+% so that the names of all the `wrong' months are not stored.
+% This optimisation is not done here as that would `freeze'
+% |\today| in any special purpose format made by loading the class
+% file into the format file.
+% \changes{v1.3j}{1995/08/16}{use \cs{edef} to save a lot of space}
+% \changes{v1.3w}{1997/10/06}{use \cs{def} again, latex/2620}
+% \begin{macrocode}
+\def\today{\ifcase\month\or
+ January\or February\or March\or April\or May\or June\or
+ July\or August\or September\or October\or November\or December\fi
+ \space\number\day, \number\year}
+% \end{macrocode}
+% \end{macro}
+%
+% \subsection{Two column mode}
+%
+% We have \pstyle{plain} pages in the document classes article and
+% report unless the user specified otherwise. In the `book'
+% document class we use the page style \pstyle{headings} by
+% default. We use arabic pagenumbers.
+% \begin{macrocode}
+%<!book>\pagestyle{plain}
+%<book>\pagestyle{headings}
+\pagenumbering{arabic}
+% \end{macrocode}
+%
+% Wszystkie kolumny muszą być tej samej długości.
+% \begin{macrocode}
+\flushbottom
+% \end{macrocode}
+% When the \Lopt{twocolumn} option was specified we call
+% |\twocolumn| to activate this mode. We try to make each column as
+% long as the others, but call |sloppy| to make our life easier.
+% \begin{macrocode}
+\if@twocolumn
+ \twocolumn
+ \sloppy
+% \end{macrocode}
+% Normally we call |\onecolumn| to initiate typesetting in one
+% column.
+% \begin{macrocode}
+\else
+ \onecolumn
+\fi
+% \end{macrocode}
+%
+% \section{Przeciwkorby}
+%
+%
+%\subsection{natbib}
+%
+% Przeciwkorby dla \texttt{natbib.sty}, który bardzo się upiera,
+% żeby dostawić swoje trzy grosze w~nagłówku bibliografii:
+% \begin{macrocode}
+\AtBeginDocument{\@ifpackageloaded{natbib}{%
+%<article>\renewcommand\bibsection{\section*{\refname}}%
+%<report|book>\renewcommand\bibsection{\chapter*{\bibname}%
+%<report|book> \@mkboth{\bibname}{\bibname}}%
+}{}}
+% \end{macrocode}
+%
+%\subsection{hyperref}
+%
+% Przeciwkorby dla kompatybilności z~hyperrefem. Na razie dbamy
+% o~odsyłacze do nienumerowanych poleceń podziału, ale znając
+% hyperref, coÅ› pewnie jeszcze wyskoczy.
+% \begin{macrocode}
+\let\mw@hyperref@phantom\@gobble
+\AtBeginDocument{\@ifpackageloaded{hyperref}{%
+ \def\mw@hyperref@phantom#1{%
+ \Hy@GlobalStepCount\Hy@linkcounter
+ \xdef\@currentHref{#1*.\the\Hy@linkcounter}%
+ \Hy@raisedlink{\hyper@anchorstart{\@currentHref}\hyper@anchorend}%
+ }%
+ \let\@caption\mw@caption@hyperref
+ }{%
+ \let\mw@caption@hyperref\@undefined
+ }%
+}
+% \end{macrocode}
+%
+% \subsection{\cs{clubpenalty}}
+% \changes{0.70}{2009/03/07}{przeciwkorba dla \cs{clubpenalty}}
+% Makro \cs{@doendpe} bywa używane w~kontekście, gdzie
+% \cs{everypar} jest niepuste. Jedyny przypadek, który na razie
+% wyskoczył: sekwencja sekcja run-in, dokładnie jeden akapit,
+% środowisko listowe. W~tej sytuacji nie chce się odtworzyć
+% wartość \cs{clubpenalty}. Problem zauważył Marcin Borkowski.
+% Błąd jest też w~klasach standardowych.
+%
+% Ta przeciwkorba jest nieco siłowa, lepiej byłoby poprawić w~kernelu.
+% \begin{macrocode}
+\def\@doendpe{\@endpetrue
+ \clubpenalty\@clubpenalty
+ \def\par{\@restorepar\everypar{}\par\@endpefalse}%
+ \everypar{{\setbox\z@\lastbox}\everypar{}\@endpefalse}%
+}
+%</article|report|book>
+% \end{macrocode}
+% \Finale
+%
+%% \CharacterTable
+%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%% Digits \0\1\2\3\4\5\6\7\8\9
+%% Exclamation \! Double quote \" Hash (number) \#
+%% Dollar \$ Percent \% Ampersand \&
+%% Acute accent \' Left paren \( Right paren \)
+%% Asterisk \* Plus \+ Comma \,
+%% Minus \- Point \. Solidus \/
+%% Colon \: Semicolon \; Less than \<
+%% Equals \= Greater than \> Question mark \?
+%% Commercial at \@ Left bracket \[ Backslash \\
+%% Right bracket \] Circumflex \^ Underscore \_
+%% Grave accent \` Left brace \{ Vertical bar \|
+%% Right brace \} Tilde \~}
+\endinput
diff --git a/macros/latex/contrib/mwcls/mwcls.ins b/macros/latex/contrib/mwcls/mwcls.ins
new file mode 100644
index 0000000000..a080c474a6
--- /dev/null
+++ b/macros/latex/contrib/mwcls/mwcls.ins
@@ -0,0 +1,70 @@
+%%
+%% This file will generate fast loadable files and documentation
+%% driver files from the doc files in this package when run through
+%% LaTeX or TeX.
+%%
+%% Copyright 2001 by Marcin Woli\'nski
+%%
+%%
+%% --------------- start of docstrip commands ------------------
+%%
+
+\input docstrip
+
+\preamble
+
+This is a generated file.
+
+Copyright 2000-2003, 2008-2009, 2017 by Woli\string\'nski
+<wolinski@gust.org.pl>
+
+
+This work may be distributed and/or modified under the
+conditions of the LaTeX Project Public License, either version 1.2
+of this license or (at your option) any later version.
+The latest version of this license is in
+ http://www.latex-project.org/lppl.txt
+and version 1.2 or later is part of all distributions of LaTeX
+version 1999/12/01 or later.
+
+\endpreamble
+
+\keepsilent
+\askforoverwritefalse
+\usedir{tex/latex/mwcls}
+
+\generate{\file{mwart.cls}{\from{mwcls.dtx}{article}}
+ \file{mwrep.cls}{\from{mwcls.dtx}{report}}
+ \file{mwbk.cls}{\from{mwcls.dtx}{book}}
+ \file{mw10.clo}{\from{mwcls.dtx}{10pt}}
+ \file{mw11.clo}{\from{mwcls.dtx}{11pt}}
+ \file{mw12.clo}{\from{mwcls.dtx}{12pt}}
+ \file{mwbk10.clo}{\from{mwcls.dtx}{10pt,bk}}
+ \file{mwbk11.clo}{\from{mwcls.dtx}{11pt,bk}}
+ \file{mwbk12.clo}{\from{mwcls.dtx}{12pt,bk}}
+ }
+
+\ifToplevel{
+\Msg{***********************************************************}
+\Msg{*}
+\Msg{* To finish the installation you have to move the following}
+\Msg{* files into a directory searched by TeX:}
+\Msg{*}
+\Msg{* \space\space mwart.cls}
+\Msg{* \space\space mwrep.cls}
+\Msg{* \space\space mwbk.cls}
+\Msg{* \space\space mw10.clo}
+\Msg{* \space\space mw11.clo}
+\Msg{* \space\space mw12.clo}
+\Msg{* \space\space mwbk10.clo}
+\Msg{* \space\space mwbk11.clo}
+\Msg{* \space\space mwbk12.clo}
+\Msg{*}
+\Msg{* To produce the documentation run mwcls.dtx through LaTeX.}
+\Msg{*}
+\Msg{* Happy TeXing}
+\Msg{***********************************************************}
+}
+
+\endbatchfile
+
diff --git a/macros/latex/contrib/mwcls/mwclsdoc.pdf b/macros/latex/contrib/mwcls/mwclsdoc.pdf
new file mode 100644
index 0000000000..c0d3cc62a3
--- /dev/null
+++ b/macros/latex/contrib/mwcls/mwclsdoc.pdf
Binary files differ