summaryrefslogtreecommitdiff
path: root/macros/latex/contrib/etl/etl.dtx
diff options
context:
space:
mode:
authorNorbert Preining <norbert@preining.info>2021-11-08 03:02:49 +0000
committerNorbert Preining <norbert@preining.info>2021-11-08 03:02:49 +0000
commitf3bd7117b5dfa4a51d51c4e416c8a656651f1ce2 (patch)
tree5053c95dab175775cc85badf7990ffa535676f23 /macros/latex/contrib/etl/etl.dtx
parent8389f0bb8e6af2c5dcbfe3cdad746a9c170d1157 (diff)
CTAN sync 202111080302
Diffstat (limited to 'macros/latex/contrib/etl/etl.dtx')
-rw-r--r--macros/latex/contrib/etl/etl.dtx383
1 files changed, 286 insertions, 97 deletions
diff --git a/macros/latex/contrib/etl/etl.dtx b/macros/latex/contrib/etl/etl.dtx
index 4c15f43c13..ae47931f40 100644
--- a/macros/latex/contrib/etl/etl.dtx
+++ b/macros/latex/contrib/etl/etl.dtx
@@ -109,10 +109,11 @@ and the derived files etl.pdf
% The \pkg{etl} package provides a few \emph{slow but expandable} alternatives
% to unexpandable functions found inside the \pkg{l3tl} module of \pkg{expl3}.
% All user functions must not contain the tokens \cs{s__etl_stop}\footnote{At
-% any nesting level of groups} or \cs{__etl_act_result:n}\footnote{Outside of
-% some local brace groups} in any argument unless specified otherwise (there
-% might be other forbidden tokens, all of which are internals to this package,
-% and usually shouldn't somehow end up inside the input stream by accident).
+% any nesting level of groups} or \cs{__etl_act_result:n}\footnote{On the top
+% level (so nested usages in groups are fine)} in any argument unless specified
+% otherwise (there might be other forbidden tokens, all of which are internals
+% to this package, and usually shouldn't somehow end up inside the input stream
+% by accident).
%
% There is another limitation of this package: There are tokens which cannot
% expandably be differentiated from each other, those are active characters let
@@ -132,7 +133,10 @@ and the derived files etl.pdf
% the parser doesn't consider the character code of tokens with category 1 or 2
% (group begin and group end, typically |{}|), instead all tokens found with
% these two category codes are normalised to \texttt{\{\textsubscript{1}} and
-% \texttt{\}\textsubscript{2}}.
+% \texttt{\}\textsubscript{2}} (an exception to this rule are the functions
+% \cs{etl_token_replace_once:nNn} and \cs{etl_replace_once:nnn} in which this
+% normalisation is only done up to the replacement, and the rest of the input is
+% forwarded unchanged).
%
% The core macro \cs{etl_act:nnnnnnn} is modelled after an internal of
% \pkg{l3tl} called \cs{__tl_act:NNNn} but with some more possibilities added.
@@ -160,9 +164,8 @@ and the derived files etl.pdf
% expansion using \cs{exp_not:n}). Also you can specify some \meta{output}
% which should be there from the beginning.
%
-% Functions without the argument \meta{output} will start with an empty
-% output, and those without \meta{final} will just output the results at the
-% end.
+% Variants without the argument \meta{output} will start with an empty output,
+% and those without \meta{final} will just output the results at the end.
%
% \begin{texnote}
% The result is returned within \cs{exp_not:n}, which means that the token
@@ -174,6 +177,9 @@ and the derived files etl.pdf
% \end{texnote}
% \end{function}
%
+% All other functions which start in |\etl_act_| should only be used inside the
+% \meta{normal}, \meta{space}, or \meta{group} code of \cs{etl_act:nnnnnnn}.
+%
% \begin{function}[EXP]{\etl_act_output:n, \etl_act_output_pre:n}
% \begin{syntax}
% \cs{etl_act_output:n} \Arg{token list}
@@ -181,8 +187,6 @@ and the derived files etl.pdf
% This will add \meta{token list} to the output of \cs{etl_act:nnnnnnn}. The
% normal version will add \meta{token list} after the current output, the
% |pre| variant will put it before the current output.
-% Might be used inside of the \meta{normal}, \meta{space}, or \meta{group}
-% code of \cs{etl_act:nnnnnnn}.
% \end{function}
%
% \begin{function}[EXP]{\etl_act_output_rest:, \etl_act_output_rest_pre:}
@@ -192,9 +196,12 @@ and the derived files etl.pdf
% After this macro was used all remaining things inside the \meta{token list}
% argument of \cs{etl_act:nnnnnnn} will be added to the output. The normal
% version will add it to the end of the output, the |pre| variant will put the
-% remainder before the current output in reversed order.
-% Might be used inside of the \meta{normal}, \meta{space}, or \meta{group}
-% code of \cs{etl_act:nnnnnnn}.
+% remainder before the current output in reversed order. Any begin group and
+% end group tokens inside \meta{token list} will be normalised by this. A
+% faster alternative (that doesn't normalise) would be
+% \begin{verbatim}
+% \etl_act_apply_to_rest:n { \etl_act_break_post:n }
+% \end{verbatim}
% \end{function}
%
% \begin{function}[EXP]{\etl_act_status:n}
@@ -203,8 +210,6 @@ and the derived files etl.pdf
% \end{syntax}
% This will change the current status of \cs{etl_act:nnnnnnn} to
% \meta{status}.
-% Might be used inside of the \meta{normal}, \meta{space}, or \meta{group}
-% code of \cs{etl_act:nnnnnnn}.
% \end{function}
%
% \begin{function}[EXP]{\etl_act_put_back:n}
@@ -214,8 +219,6 @@ and the derived files etl.pdf
% You can put \meta{token list} back into the input stream to be reconsidered
% by the current \cs{etl_act:nnnnnnn} loop (of course this doesn't have to be
% literally put back, you might add completely new contents with this).
-% Might be used inside of the \meta{normal}, \meta{space}, or \meta{group}
-% code of \cs{etl_act:nnnnnnn}.
% \end{function}
%
% \begin{function}[EXP]
@@ -231,8 +234,19 @@ and the derived files etl.pdf
% \end{syntax}
% With these functions you can change the provided code to act on
% \meta{normal} (so |N|-type) tokens, \meta{space}s, and \meta{group}s.
-% Might be used inside of the \meta{normal}, \meta{space}, or \meta{group}
-% code of \cs{etl_act:nnnnnnn}.
+% \end{function}
+%
+% \begin{function}[EXP]{\etl_act_apply_to_rest:n}
+% \begin{syntax}
+% \cs{etl_act_apply_to_rest:n} \Arg{code}
+% \end{syntax}
+% This will fetch the rest of the input \meta{token list} of the current
+% \cs{etl_act:nnnnnnn} call and leave \meta{code}\Arg{rest} in the input
+% stream (without brace normalisation). It will not end the current
+% \cs{etl_act:nnnnnnn} loop (but since the \meta{token list} remainder is now
+% empty it'll end after your \meta{code} is done, except if you put new
+% contents in the list using \cs{etl_act_put_back:n}) nor affect it in any
+% other way.
% \end{function}
%
% \begin{function}[EXP]{\etl_act_do_final:}
@@ -244,8 +258,6 @@ and the derived files etl.pdf
% \meta{final} code was used, the output). The \meta{final} code will receive
% the current status followed by the current output as two arguments (just
% like it would when the end of the \meta{token list} was reached).
-% Might be used inside of the \meta{normal}, \meta{space}, or \meta{group}
-% code of \cs{etl_act:nnnnnnn}.
% \end{function}
%
% \begin{function}[EXP]{\etl_act_break:, \etl_act_break_discard:}
@@ -255,8 +267,6 @@ and the derived files etl.pdf
% This will immediately stop the current \cs{etl_act:nnnnnnn} invocation and
% leave the current output in the input stream. The |discard| variant will
% gobble the current output and leave nothing in the input stream.
-% Might be used inside of the \meta{normal}, \meta{space}, or \meta{group}
-% code of \cs{etl_act:nnnnnnn}.
% \end{function}
%
% \begin{function}[EXP]{\etl_act_break:n}
@@ -265,8 +275,6 @@ and the derived files etl.pdf
% \end{syntax}
% This will immediately stop the current \cs{etl_act:nnnnnnn} invocation,
% gobble the current output and leave \meta{token list} in the input stream.
-% Might be used inside of the \meta{normal}, \meta{space}, or \meta{group}
-% code of \cs{etl_act:nnnnnnn}.
% \end{function}
%
% \begin{function}[EXP]{\etl_act_break_pre:n, \etl_act_break_post:n}
@@ -280,6 +288,119 @@ and the derived files etl.pdf
% \end{function}
%
%
+% \subsubsection{Examples}
+%
+% To give examples how you could use \cs{etl_act:nnnnnnn} the following could
+% be used to reimplement \cs{tl_reverse:n}. We work with a bit of currying here
+% (this gives a small speed gain in general, though for code clarity you might
+% decide to not curry each and every argument). Since a reversing function
+% doesn't need to postprocess its output we can use the shorter
+% \cs{etl_act:nnnnn}. The three internal functions all need to gobble the
+% status.
+%
+% \begin{verbatim}
+% % argument #2 is curried
+% \cs_new:Npn \__my_reverse_normal:nN #1 { \etl_act_output_pre:n }
+% \cs_new:Npn \__my_reverse_space:n #1 { \etl_act_output_pre:n { ~ } }
+% \cs_new:Npn \__my_reverse_group:nn #1#2 { \etl_act_output_pre:n { {#2} } }
+% % argument #1 is curried
+% \cs_new:Npn \my_reverse:n
+% {
+% \etl_act:nnnnn
+% \__my_reverse_normal:nN
+% \__my_reverse_space:n
+% \__my_reverse_group:nn
+% {} % empty status
+% }
+% \end{verbatim}
+%
+% We could also create a similar function that'll reverse the input up to the
+% first space and discard the remainder (no idea why somebody would want to do
+% that).
+%
+% \begin{verbatim}
+% % argument #1 is curried
+% \cs_new:Npn \my_reverse_discard_after_space:n
+% {
+% \etl_act:nnnnn
+% \__my_reverse_normal:nN
+% \etl_act_break:
+% \__my_reverse_group:nn
+% {} % empty status
+% }
+% \end{verbatim}
+%
+% Or a function that reverses the contents of groups as well.
+%
+% \begin{verbatim}
+% \cs_generate_variant:Nn \etl_act_output_pre:n { e }
+% \cs_new:Npn \__my_reverse_group_reversed:nn #1#2
+% { \etl_act_output_pre:e { { \my_reverse_deep:n {#2} } } }
+% % argument #1 is curried
+% \cs_new:Npn \my_reverse_deep:n
+% {
+% \etl_act:nnnnn
+% \__my_reverse_normal:nN
+% \__my_reverse_space:n
+% \__my_reverse_group_reversed:nn
+% {} % empty status
+% }
+% \end{verbatim}
+%
+% Another function could count a specific token inside a token list. Since for
+% this neither output-reordering nor post processing is needed we shortcut by
+% not using \cs{etl_output:n} but instead directly leaving |+ \c_one_int| (which
+% also doesn't need to be protected against further expansion) in the input.
+%
+% \begin{verbatim}
+% \cs_new:Npn \__my_count_token:NN #1#2
+% { \etl_token_if_eq:NNT #1#2 { + \c_one_int } }
+% \cs_new:Npn \my_count_token:Nn #1#2
+% {
+% \int_eval:n
+% {
+% \c_zero_int
+% \etl_act:nnnnn
+% \__my_count_token:NN
+% \use_none:n
+% \use_none:nn
+% {#1}
+% {#2}
+% }
+% }
+% \end{verbatim}
+%
+% As a last example we reimplement the \cs{etl_token_replace_once:nNn} function.
+% The function doesn't need to reorder any tokens, so we shortcut with
+% \cs{exp_not:n} to output things in place. We put the token we want to replace
+% in the code for |N|-type processing and the replacement in the status. When we
+% found the token we want to replace we put our replacement there and output the
+% rest unaltered.
+%
+% \begin{verbatim}
+% \cs_new:Npn \my_replace_token:nNn #1#2#3
+% {
+% \etl_act:nnnnn
+% { \__my_replace_token:NnN #2 }
+% { ~ \use_none:n }
+% { \__my_replace_token:nn }
+% {#3}
+% {#1}
+% }
+% \cs_new:Npn \__my_replace_token:nn #1#2 { { \exp_not:n {#2} } }
+% \cs_new:Npn \__my_replace_token:NnN #1#2#3
+% {
+% \etl_token_if_eq:NNTF #1#3
+% { \exp_not:n {#2} \etl_act_apply_to_rest:n { \etl_act_break:n } }
+% { \exp_not:N #3 }
+% }
+% \end{verbatim}
+%
+% I hope this gave you at least an idea on how to use the loop and that the
+% explanations on the functions not used in these examples suffice to also give
+% you an idea on how to use them.
+%
+%
% \subsection{Conditionals}\label{sec:conditionals}
%
% \begin{function}[pTF]{\etl_token_if_eq:NN}
@@ -293,18 +414,6 @@ and the derived files etl.pdf
% \cs{str_if_eq:nnTF} is true).
% \end{function}
%
-% \begin{function}[pTF]{\etl_if_eq:nn}
-% \begin{syntax}
-% \cs{etl_if_eq_p:nn} \Arg{token list_1} \Arg{token list_2}
-% \cs{etl_if_eq:nnTF} \Arg{token list_1} \Arg{token list_2} \Arg{true code} \Arg{false code}
-% \end{syntax}
-% Compares \meta{token list_1} and \meta{token list_2} with each other on a
-% token-by-token basis. Keep in mind that there are tokens which can't be told
-% apart from each other, and that groups are normalised. If both token lists
-% match (modulo the mentioned limitations) the \meta{true code} is left in the
-% input stream, else the \meta{false code}.
-% \end{function}
-%
% \begin{function}[pTF]{\etl_token_if_in:nN}
% \begin{syntax}
% \cs{etl_token_if_in_p:nN} \Arg{token list} \meta{token}
@@ -324,6 +433,18 @@ and the derived files etl.pdf
% searched as well.
% \end{function}
%
+% \begin{function}[pTF]{\etl_if_eq:nn}
+% \begin{syntax}
+% \cs{etl_if_eq_p:nn} \Arg{token list_1} \Arg{token list_2}
+% \cs{etl_if_eq:nnTF} \Arg{token list_1} \Arg{token list_2} \Arg{true code} \Arg{false code}
+% \end{syntax}
+% Compares \meta{token list_1} and \meta{token list_2} with each other on a
+% token-by-token basis. Keep in mind that there are tokens which can't be told
+% apart from each other, and that groups are normalised. If both token lists
+% match (modulo the mentioned limitations) the \meta{true code} is left in the
+% input stream, else the \meta{false code}.
+% \end{function}
+%
% \begin{function}[pTF]{\etl_if_in:nn}
% \begin{syntax}
% \cs{etl_if_in_p:nn} \Arg{token list} \Arg{search text}
@@ -334,9 +455,8 @@ and the derived files etl.pdf
% code}. Both macro parameter tokens as well as tokens with category code~1
% and 2 (normally |{}|) can be part of \meta{search text} (unlike for the
% similar function \cs{tl_if_in:nnTF}). Material inside of groups in
-% \meta{token list} is ignored (except for the groups contained in
-% \meta{search text}). So the following would first yield |true| and then
-% |false|:
+% \meta{token list} is ignored (except for groups contained in \meta{search
+% text}). So the following would first yield |true| and then |false|:
% \end{function}
% \begin{verbatim}
% \etl_if_in:nnTF { a{b{c}} } { {b{c}} } { true } { false }
@@ -564,7 +684,7 @@ and the derived files etl.pdf
% Tell who we are:
% \begin{macrocode}
\ProvidesExplPackage{etl}
- {2021-08-28} {0.2}
+ {2021-11-07} {0.3}
{expandable token list manipulation}
% \end{macrocode}
%
@@ -603,18 +723,6 @@ and the derived files etl.pdf
%
% \subsection{Small auxiliaries}
%
-% \begin{macro}[EXP]{\@@_if_mark:nTF,\@@_if_mark:w,\@@_if_mark_true:w}
-% A small check whether some argument contains the scan mark \cs{s_@@_mark},
-% the mark should always be the last token of the argument (and only a single
-% such mark should be contained) to ensure correct behaviour.
-% \begin{macrocode}
-\cs_new:Npn \@@_if_mark:nTF #1
- { \@@_if_mark:w #1 \@@_if_mark_true:w \s_@@_mark \use_ii:nn }
-\cs_new:Npn \@@_if_mark:w #1 \s_@@_mark {}
-\cs_new:Npn \@@_if_mark_true:w \s_@@_mark \use_ii:nn #1#2 {#1}
-% \end{macrocode}
-% \end{macro}
-%
% \begin{macro}[EXP]{\@@_split_first:w}
% Can be used to extract the first element from a token list, it should always
% be used like this:
@@ -732,15 +840,14 @@ and the derived files etl.pdf
% \end{macrocode}
% We also provide a version without the \cs{@@_unexpanded:w} around it for
% internal purposes, in which we'd otherwise have to remove it for correct
-% behaviour.
+% behaviour. For that we use \cs{use_ii_iii:nnn} which will remove one set
+% of braces and the \cs{@@_unexpanded:w}.
% \begin{macrocode}
-\cs_new:Npn \@@_act:nnnnnnn #1#2#3#4#5#6#7
+\exp_args:NNno \exp_args:Nno \use:n
+ { \cs_new:Npn \@@_act:nnnnnnn #1#2#3#4#5#6#7 }
{
- \@@_expanded:w
- {
- \@@_act:w #7 {\s_@@_stop} . \s_@@_stop {#5} {#1} {#2} {#3}
- \@@_act_result:n {#6} {#4}
- }
+ \exp_after:wN \use_ii_iii:nnn
+ \etl_act:nnnnnnn {#1} {#2} {#3} {#4} {#5} {#6} {#7}
}
% \end{macrocode}
% We also provide two reduced function variants, the first without presetting
@@ -921,6 +1028,45 @@ and the derived files etl.pdf
% \end{macro}
% \end{macro}
%
+% \begin{macro}[EXP]
+% {
+% \@@_act_unexpanded_rest:w,
+% \@@_act_unexpanded_rest_aux:w, \@@_act_unexpanded_rest_aux:n,
+% \@@_act_unexpanded_rest_done:w
+% }
+% This function tries to shortcut as much as possible to output the
+% remainder of the token list in an unchanged way. This can be done by
+% grabbing everything up to the next opening brace (since the stop marker is
+% contained in a group), outputting that, and checking whether we're done. If
+% not output the next group and loop. The first step removes the act code.
+%
+% Drawback of this is that spaces and braces are not normalised for the
+% remainder of that call (which is what we had documented).
+% \begin{macrocode}
+\cs_new:Npn \@@_act_unexpanded_rest:w #1 \@@_act:w #2#
+ {
+ \@@_unexpanded:w {#2}
+ \@@_act_unexpanded_rest_aux:n
+ }
+\cs_new:Npn \@@_act_unexpanded_rest_aux:w #1#
+ {
+ \@@_unexpanded:w {#1}
+ \@@_act_unexpanded_rest_aux:n
+ }
+\cs_new:Npn \@@_act_unexpanded_rest_aux:n #1
+ {
+ \@@_act_if_end:w #1 \@@_act_unexpanded_rest_done:w \s_@@_stop
+ { \@@_unexpanded:w {#1} }
+ \@@_act_unexpanded_rest_aux:w
+ }
+\cs_new:Npn \@@_act_unexpanded_rest_done:w
+ \s_@@_stop #1 \@@_act_unexpanded_rest_aux:w
+ . \s_@@_stop #2#3#4#5
+ \@@_act_result:n #6#7
+ {}
+% \end{macrocode}
+% \end{macro}
+%
% \begin{macro}[EXP]{\etl_act_status:n}
% Just switch out the status which is stored immediately after \cs{s_@@_stop}.
% \begin{macrocode}
@@ -964,6 +1110,7 @@ and the derived files etl.pdf
{ #2 \s_@@_stop {#3} {#4} {#5} {#1} }
% \end{macrocode}
% \end{macro}
+%
% \begin{macro}[EXP]
% {
% \etl_act_do_final:,
@@ -990,6 +1137,66 @@ and the derived files etl.pdf
% \end{macrocode}
% \end{macro}
%
+% \begin{macro}[EXP]{\etl_act_apply_to_rest:n}
+% This function can be used to get the remainder of the input \meta{token
+% list} and apply some user code on it. To get past the user code we use
+% \cs{@@_expanded:w} with a brace trick. The heavy lifting is done by
+% \cs{@@_act_get_rest:w}. The \cs{prg_do_nothing:} prevents accidental brace
+% stripping and will be removed by \cs{@@_act_get_rest:w}.
+% \begin{macrocode}
+\cs_new:Npn \etl_act_apply_to_rest:n #1
+ {
+ \@@_expanded:w { \@@_unexpanded:w {#1} { \if_false: }} \fi:
+ \@@_act_get_rest:w \prg_do_nothing:
+ }
+% \end{macrocode}
+% \end{macro}
+%
+% \begin{macro}[EXP]{\@@_act_get_rest:w}
+% This macro should be used with two unbalanced opening braces before it and
+% inside an \cs{@@_expanded:w} context with a \cs{prg_do_nothing:} following
+% it to prevent accidental brace stripping. It'll expand to the remainder of
+% the input \meta{token list} followed by a closing brace and leaves
+% everything else untouched.
+% \begin{macro}[EXP]
+% {\@@_act_get_rest_aux:nw, \@@_act_get_rest_aux:nn, \@@_act_get_rest_done:w}
+% \begin{macrocode}
+\cs_new:Npn \@@_act_get_rest:w #1 \@@_act:w #2#
+ {
+ \@@_unexpanded:w {#2}
+ \@@_act_get_rest_aux:nn {#1}
+ }
+\cs_new:Npn \@@_act_get_rest_aux:nw #1 #2#
+ {
+ \@@_unexpanded:w {#2}
+ \@@_act_get_rest_aux:nn {#1}
+ }
+% \end{macrocode}
+% Each group might be the end marker, so we check that, else leave the group
+% there and grab until the next group starts.
+% \begin{macrocode}
+\cs_new:Npn \@@_act_get_rest_aux:nn #1#2
+ {
+ \@@_act_if_end:w #2 \@@_act_get_rest_done:w \s_@@_stop
+ { \@@_unexpanded:w {#2} }
+ \@@_act_get_rest_aux:nw {#1}
+ }
+% \end{macrocode}
+% This closes the two unbalanced opening braces (ending the \cs{@@_expanded:w}
+% context) and puts the remaining code back in the input stream (as well as
+% the now empty next \cs{@@_act:w} step). The \cs{exp_after:wN} removes the
+% leading \cs{prg_do_nothing:}.
+% \begin{macrocode}
+\cs_new:Npn \@@_act_get_rest_done:w \s_@@_stop #1 \@@_act_get_rest_aux:nw #2
+ {
+ \if_false: {{ \fi: } \exp_after:wN }
+ #2
+ \@@_act:w { \s_@@_stop }
+ }
+% \end{macrocode}
+% \end{macro}
+% \end{macro}
+%
%
% \subsection{Expandable tests}
%
@@ -1359,7 +1566,7 @@ and the derived files etl.pdf
%
% \begin{macro}[EXP]{\etl_token_replace_all:nNn}
% \begin{macro}[EXP]{\@@_token_replace:NnnN}
-% Replaceing a single token (and in fact the same is true for all the
+% Replacing a single token (and in fact the same is true for all the
% replacement actions in this package) doesn't need reordering and no post
% processing, so we can use in place output using \cs{@@_unexpanded:w}. We
% store the token we want to replace inside the act function, as well as an
@@ -1418,10 +1625,7 @@ and the derived files etl.pdf
\exp_args:Nno \use:n { \cs_new:Npn \etl_token_replace_once:nNn #1#2#3 }
{
\etl_act:nnnnnn
- {
- \@@_token_replace:NnnN #2
- { \etl_act_switch_normal:n \@@_act_unexpanded_normal:nN }
- }
+ { \@@_token_replace:NnnN #2 \@@_act_unexpanded_rest:w }
\@@_act_unexpanded_space:n
\@@_act_unexpanded_group:nn
\use_none:nn
@@ -1458,7 +1662,7 @@ and the derived files etl.pdf
% the remainder of the pattern, the full pattern, delayed tokens (those
% which matched the pattern), the replacement, and a marker which should tell
% us whether we want to only replace the first match (if so use
-% \cs{s_@@_mark}, else any other single token).
+% \cs{@@_act_unexpanded_rest:w}, else \cs{prg_do_nothing:}).
% \begin{macrocode}
\exp_args:Nno \use:n { \cs_new:Npn \etl_replace_all:nnn #1#2#3 }
{
@@ -1467,7 +1671,7 @@ and the derived files etl.pdf
\@@_replace_space:n
\@@_replace_group:nn
\@@_replace_final:nn
- { {#2} {#2} {} {#3} \scan_stop: }
+ { {#2} {#2} {} {#3} \prg_do_nothing: }
{#1}
}
% \end{macrocode}
@@ -1524,15 +1728,8 @@ and the derived files etl.pdf
\@@_if_empty:nTF {#2}
{
\@@_unexpanded:w {#5}
- \@@_if_mark:nTF {#6}
- {
- \etl_act_switch:nnn
- \@@_act_unexpanded_normal:nN
- \@@_act_unexpanded_space:n
- \@@_act_unexpanded_group:nn
- \etl_act_status:n { {} {} {} {} #6 }
- }
- { \etl_act_status:n { {#3} {#3} {} {#5} #6 } }
+ #6
+ \etl_act_status:n { {#3} {#3} {} {#5} #6 }
}
{ \etl_act_status:n { {#2} {#3} { #4 #7 } {#5} #6 } }
}
@@ -1561,15 +1758,8 @@ and the derived files etl.pdf
\@@_if_empty:nTF {#1}
{
\@@_unexpanded:w {#4}
- \@@_if_mark:nTF {#5}
- {
- \etl_act_switch:nnn
- \@@_act_unexpanded_normal:nN
- \@@_act_unexpanded_space:n
- \@@_act_unexpanded_group:nn
- \etl_act_status:n { {} {} {} {} #5 }
- }
- { \etl_act_status:n { {#2} {#2} {} {#4} #5 } }
+ #5
+ \etl_act_status:n { {#2} {#2} {} {#4} #5 }
}
{ \etl_act_status:n { {#1} {#2} { #3 ~ } {#4} #5 } }
}
@@ -1598,15 +1788,8 @@ and the derived files etl.pdf
\@@_if_empty:nTF {#2}
{
\@@_unexpanded:w {#5}
- \@@_if_mark:nTF {#6}
- {
- \etl_act_switch:nnn
- \@@_act_unexpanded_normal:nN
- \@@_act_unexpanded_space:n
- \@@_act_unexpanded_group:nn
- \etl_act_status:n { {} {} {} {} #6 }
- }
- { \etl_act_status:n { {#3} {#3} {} {#5} #6 } }
+ #6
+ \etl_act_status:n { {#3} {#3} {} {#5} #6 }
}
{ \etl_act_status:n { {#2} {#3} { #4 {#7} } {#5} #6 } }
}
@@ -1640,7 +1823,7 @@ and the derived files etl.pdf
\@@_replace_space:n
\@@_replace_group_deep:nn
\@@_replace_final:nn
- { {#2} {#2} {} {#3} \scan_stop: }
+ { {#2} {#2} {} {#3} \prg_do_nothing: }
{#1}
}
\cs_new:Npn \@@_replace_group_deep:nn #1
@@ -1691,7 +1874,7 @@ and the derived files etl.pdf
%
% \begin{macro}[EXP]{\etl_replace_once:nnn}
% And this is the same as the |all| variant except that we now use the
-% \cs{s_@@_mark} marker inside the status.
+% \cs{@@_act_unexpanded_rest:w} marker inside the status.
% \begin{macrocode}
\exp_args:Nno \use:n { \cs_new:Npn \etl_replace_once:nnn #1#2#3 }
{
@@ -1700,7 +1883,7 @@ and the derived files etl.pdf
\@@_replace_space:n
\@@_replace_group:nn
\@@_replace_final:nn
- { {#2} {#2} {} {#3} \s_@@_mark }
+ { {#2} {#2} {} {#3} \@@_act_unexpanded_rest:w }
{#1}
}
% \end{macrocode}
@@ -1909,6 +2092,12 @@ and the derived files etl.pdf
% \end{macro}
% \end{macro}
%
+% \subsection{Undefine now unnecessary functions}
+%
+% \begin{macrocode}
+\cs_undefine:N \@@_act:nnnnnnn
+% \end{macrocode}
+%
% \begin{macrocode}
%</pkg>
% \end{macrocode}