CTAN sync 201909280300

1 files changed, 0 insertions, 1035 deletions

diff --git a/help/uk-tex-faq/faq-graphics.tex b/help/uk-tex-faq/faq-graphics.tex
deleted file mode 100644
index bd90cc183c..0000000000
--- a/help/uk-tex-faq/faq-graphics.tex
+++ /dev/null
@@ -1,1035 +0,0 @@
-% $Id: faq-graphics.tex,v 1.27 2014/01/22 17:29:03 rf10 Exp $
-
-\section{Graphics}
-
-\Question[Q-impgraph]{Importing graphics into \AllTeX{} documents}
-
-Knuth, when designing the current version of \TeX{} back in the early
-1980s, could discern no ``standard'' way of expressing graphics in
-documents.  He reasoned that this state could not persist for ever,
-but that it would be foolish for him to define \TeX{} primitives that
-allowed the import of graphical image definitions.  He therefore
-deferred the specification of the use of graphics to the writers of
-\acro{DVI} drivers; \TeX{} documents would control the drivers by
-means of \nothtml{\csx{special} commands (}% beware line breaks
-\Qref{\csx{special} commands}{Q-specials}\nothtml{)}.
-
-There is therefore a straightforward way for anyone to import graphics
-into their document: read the specification of the \csx{special}
-commands your driver uses, and `just' code them.  This is the
-hair-shirt approach: it definitely works, but it's not for everyone.
-
-Over the years, therefore, ``graphics inclusion'' packages have sprung
-up; most were designed for inclusion of
-\nothtml{Encapsulated \PS{} graphics (}% beware line break
-\Qref{Encapsulated \PS{} graphics}{Q-eps}\nothtml{)}\nobreakspace---
-which has become the \emph{lingua franca} of graphics inclusion over
-the last decade or so.
-
-Notable examples are the \Package{epsf} package (distributed with
-\ProgName{dvips}) and the \Package{psfig} package.  (Both of these
-packages were designed to work well with both \plaintex{} and
-\LaTeXo{}; they are both still available.)  All such packages were
-tied to a particular \acro{DVI} driver (\ProgName{dvips}, in
-the above two cases), but their code could be configured for others.
-
-The obvious next step was to make the code configurable dynamically.
-The \LaTeX{} standard \Package{graphics} package and its derivatives
-made this step: it is strongly preferred for all current work.
-
-Users of \plaintex{} have two options allowing them to use
-\Package{graphicx}: the \Package{miniltx} ``\LaTeX{} emulator'' and
-the \Package{graphicx.tex} front-end allow you to load
-\Package{graphicx}, and \Qref*{\Eplain}{Q-eplain} allows you to load
-it (using the full \LaTeX{} syntax) direct.
-
-The \Package{graphics} package takes a variety of ``driver
-options''~--- package options that select code to generate the
-commands appropriate to the \acro{DVI} driver in use.  In most cases,
-your \AllTeX{} distribution will provide a \File{graphics.cfg} file
-that will select the correct driver for what you're doing (for
-example, a distribution that provides both \LaTeX{} and \PDFLaTeX{}
-will usually provide a configuration file that determines whether
-\PDFLaTeX{} is running, and selects the definitions for it if so).
-
-The \Package{graphics} package provides a toolkit of commands (insert
-graphics, scale a box, rotate a box), which may be composed to provide
-most facilities you need; the basic command, \csx{includegraphics},
-takes one optional argument, which specifies  the bounding box of the
-graphics to be included.
-
-The \Package{graphicx} package uses the facilities of of
-\Package{graphics} behind a rather more sophisticated command syntax
-to provide a very powerful version of the \csx{includegraphics}
-command.  \Package{graphicx}'s version can combine scaling and
-rotation, viewporting and clipping, and many other things.  While this
-is all a convenience (at some cost of syntax), it is also capable of
-producing noticeably more efficient \PS{}, and some of its
-combinations are simply not possible with the \Package{graphics}
-package version.
-
-The \Package{epsfig} package provides the same facilities as
-\Package{graphicx}, but via a \csx{psfig} command (also known as
-\csx{epsfig}), capable of emulating
-the behaviour (if not the bugs) the old \Package{psfig} package.
-\Package{Epsfig} also supplies homely support for former users of the
-\Package{epsf} package.  However, there's a support issue: if you
-declare you're using \Package{epsfig}, any potential mailing list or
-usenet helper has to clear out of the equation the possibility that
-you're using ``old'' \Package{epsfig}, so that support is slower
-coming than it would otherwise be.
-
-There is no rational reason to stick with the old packages, which have
-never been entirely satisfactory in the \LaTeX{} context. (One
-irrational reason to leave them behind is that their replacement's
-name tends not to imply that it's exclusively related to \PS{}
-graphics.  The reasoning also excludes \Package{epsfig}, of course.)
-
-A wide variety of detailed techniques and tricks have been developed
-over the years, and Keith Reckdahl's \Package{epslatex} outlines them
-in compendious detail: this highly recommendable document is available
-from \acro{CTAN}.  An invaluable review of the practicalities of
-exchanging graphics between sites,
-% beware multiple line break problems
-\begin{wideversion} % hyperversion
-``\href{http://silas.psfc.mit.edu/elec_fig/elec_figures.pdf}{Graphics for Inclusion in Electronic Documents}''
-\end{wideversion}
-\begin{narrowversion} % non-hyper
-\href{http://silas.psfc.mit.edu/elec_fig/elec_figures.pdf}%
-     {``Graphics for Inclusion in Electronic Documents''}
-\end{narrowversion}
-has been written by Ian Hutchinson; the document isn't on \acro{CTAN},
-but may also be
-% beware line breaks
-\href{http://silas.psfc.mit.edu/elec_fig/}{browsed on the Web}.
-\begin{ctanrefs}
-\item[epsf.tex]\CTANref{epsf}
-\item[epsfig.sty]Part of the \CTANref{graphics} bundle
-\item[epslatex.pdf]\CTANref{epslatex}
-\item[graphics.sty]\CTANref{graphics}
-\item[graphicx.sty]Part of the \CTANref{graphics} bundle
-\item[miniltx.tex]\CTANref{graphics-plain}
-\item[psfig.sty]\CTANref{psfig}
-\end{ctanrefs}
-
-\Question[Q-dvipsgraphics]{Imported graphics in \ProgName{dvips}}
-
-\ProgName{Dvips}, as originally conceived, can only import a single
-graphics format: \nothtml{encapsulated \PS{} (\extension{eps} files, }%
-\Qref{encapsulated \PS{}}{Q-eps}\htmlonly{ (\extension{eps} files}).
-\ProgName{Dvips} also deals with the slightly eccentric \acro{EPS} that is
-created by \Qref*{\MP{}}{Q-MP}.
-
-Apart from the fact that a depressing proportion of drawing
-applications produce corrupt \acro{EPS} when asked for such output,
-this is pretty satisfactory for vector graphics work.
-
-To include bitmap graphics, you need some means of converting them to
-\PS{}; in fact many standard image manipulators (such as
-\ProgName{ImageMagick}'s \ProgName{convert}) make a good job of
-creating \acro{EPS} files (but be sure to ask for output at \PS{}
-level~2 or higher).  (\ProgName{Unix} users should beware of
-\ProgName{xv}'s claims: it has a tendency to downsample your bitmap to
-your screen resolution.)
-
-Special purpose applications \ProgName{jpeg2ps} (which converts
-\acro{JPEG} files using \PS{} level 2 functionality),
-\ProgName{bmeps} (which converts both \acro{JPEG} and \acro{PNG}
-files) and \ProgName{a2ping}/\ProgName{sam2p} (which convert a
-bewildering array of bitmap formats to \acro{EPS} or \acro{PDF} files;
-\ProgName{sam2p} is one of the engines that \ProgName{a2ping} uses)
-are also considered ``good bets''.
-
-\ProgName{Bmeps} comes with patches to produce your own version of
-\ProgName{dvips} that can cope with \acro{JPEG} and \acro{PNG} direct,
-using \ProgName{bmeps}'s conversion library.  \ProgName{Dvips}, as
-distributed by \miktex{}, comes with those patches built-in, but
-assuming that capability destroys portability, and is only
-recommendable if you are sure you will never want to share your
-document.
-\begin{ctanrefs}
-\item[a2ping]\CTANref{a2ping}
-\item[bmeps]Distributed as part of \CTANref{dktools}[bmeps]
-\item[jpeg2ps]\CTANref{jpeg2ps}
-\item[sam2p]\CTANref{sam2p}
-\end{ctanrefs}
-
-\Question[Q-pdftexgraphics]{Imported graphics in \PDFLaTeX{}}
-
-\PDFTeX{} itself has a rather wide range of formats that it can
-``natively'' incorporate into its output \acro{PDF} stream:
-\acro{JPEG} (\extension{jpg} files) for photographs and similar images,
-\acro{PNG} files for artificial bitmap images, and \acro{PDF} for
-vector drawings.  Old versions of \PDFTeX{} (prior to version~1.10a)
-supported \acro{TIFF} (\extension{tif} files) format as an alternative
-to \acro{PNG} files; don't rely on this facility, even if you
-\emph{are} running an old enough version of \PDFTeX{}\dots{}
-
-In addition to the `native' formats, the standard \PDFLaTeX{}
-\Package{graphics} package setup causes Hans Hagen's \File{supp-pdf}
-macros to be loaded: these macros are capable of translating the
-output of \MP{} to \acro{PDF} ``on the fly''; thus \MP{} output
-(\extension{mps} files) may also be included in \PDFLaTeX{} documents.
-
-The commonest problem users encounter, when switching from \TeX{}, is
-that there is no straightforward way to include \acro{EPS} files:
-since \PDFTeX{} is its own ``driver'', and since it contains no means
-of converting \PS{} to \acro{PDF}, there's no direct way the job can
-be done.
-
-The simple solution is to convert the \acro{EPS} to an appropriate
-\acro{PDF} file.  The \ProgName{epstopdf} program will do this: it's
-available either as a Windows executable or as a \ProgName{Perl}
-script to run on Unix and other similar systems.  A \LaTeX{} package,
-\Package{epstopdf}, can be used to generate the requisite \acro{PDF}
-files ``on the fly''; this is convenient, but requires that you
-suppress one of \TeX{}'s security checks: don't allow its use in files
-from sources you don't entirely trust.
-
-The package \Package{pst-pdf} permits other things than `mere'
-graphics files in its argument.  \Package{Pst-pdf} operates (the
-authors suggest) ``like \BibTeX{}''~--- you process your file using
-\PDFLaTeX{}, then use \LaTeX{}, \ProgName{dvips} and \ProgName{ps2pdf}
-in succession, to produce a secondary file to input to your next
-\PDFLaTeX{} run.  (Scripts are provided to ease the production of the
-secondary file.)
-
-A further extension is \Package{auto-pst-pdf}, which generates
-\acro{PDF} (essentially) transparently, by spawning a job to process
-output such as \Package{pst-pdf} uses.  If your \pdflatex{}
-installation doesn't automatically allow it~--- see % ! line break
-\Qref*{spawning a process}{Q-spawnprog}~--- then you need to start
-\pdflatex{} with:
-\begin{quote}
-\begin{verbatim}
-pdflatex -shell-escape <file>
-\end{verbatim}
-\end{quote}
-for complete `automation'.
-
-An alternative solution is to use \ProgName{purifyeps}, a
-\ProgName{Perl} script which uses the good offices of
-\ProgName{pstoedit} and of \MP{} to convert your Encapsulated \PS{} to
-``Something that looks like the encapsulated \PS{} that comes out of
-\MP{}'', and can therefore be included directly.  Sadly,
-\ProgName{purifyeps} doesn't work for all \extension{eps} files.
-
-Good coverage of the problem is to be found in Herbert Vo\ss {}'s
-\href{http://pstricks.tug.org/main.cgi?file=pdf/pdfoutput}{\acro{PDF} support page},
-which is targeted at the use of \Package{pstricks} in
-\PDFLaTeX{}, and also covers the \Package{pstricks}-specific package
-\Package{pdftricks}.  A recent alternative (not covered in % ! line break
-Herbert Vo\ss {}'s page) is \Package{pdftricks2}, which offers similar
-facilities to \Package{pdftricks}, but with some useful variations.
-\begin{ctanrefs}
-\item[auto-pst-pdf.sty]\CTANref{auto-pst-pdf}
-\item[epstopdf]Browse \CTANref{epstopdf}
-\item[epstopdf.sty]Distributed with Heiko Oberdiek's packages
-  \CTANref{oberdiek}
-\item[pdftricks.sty]\CTANref{pdftricks}
-\item[pdftricks2.sty]\CTANref{pdftricks2}
-\item[pst-pdf.sty]\CTANref{pst-pdf}
-\item[pstoedit]\CTANref{pstoedit}
-\item[purifyeps]\CTANref{purifyeps}
-\end{ctanrefs}
-\LastEdit{2012-11-20}
-
-\Question[Q-dvipdfmgraphics]{Imported graphics in \ProgName{dvipdfm}}
-
-\ProgName{Dvipdfm} (and \ProgName{dvipdfmx}) translates direct from
-\acro{DVI} to \acro{PDF} (all other available routes produce \PS{}
-output using \ProgName{dvips} and then convert that to \acro{PDF} with
-\href{http://www.ghostscript.com/}{\ProgName{ghostscript}}
-or \ProgName{Acrobat}'s \ProgName{Distiller}).
-
-\ProgName{Dvipdfm}/\ProgName{Dvipdfmx} are particularly flexible
-applications.  They permit the inclusion of bitmap and \acro{PDF}
-graphics (as does \Qref*{\PDFTeX{}}{Q-pdftexgraphics}), but are also
-capable of employing
-\href{http://www.ghostscript.com/}{\ProgName{ghostscript}} ``on the
-fly'' to permit the inclusion of encapsulated \PS{} (\extension{eps})
-files by translating them to \acro{PDF}.  In this way, they combine the good
-qualities of \ProgName{dvips} and of \PDFTeX{} as a means of
-processing illustrated documents.
-
-Unfortunately, ``ordinary'' \LaTeX{} can't deduce the bounding box of
-a binary bitmap file (such as \acro{JPEG} or \acro{PNG}), so you have
-to specify the bounding box.  This may be done explicitly, in the
-document:
-\begin{quote}
-\begin{verbatim}
-\usepackage[dvipdfm]{graphicx}
-...
-\includegraphics[bb=0 0 540 405]{photo.jpg}
-\end{verbatim}
-\end{quote}
-It's usually not obvious what values to give the ``\texttt{bb}'' key,
-but the program \ProgName{ebb} will generate a file
-containing the information; the above numbers came from an
-\ProgName{ebb} output file \File{photo.bb}:
-\begin{quote}
-\begin{verbatim}
-%%Title: /home/gsm10/photo.jpg
-%%Creator: ebb Version 0.5.2
-%%BoundingBox: 0 0 540 405
-%%CreationDate: Mon Mar  8 15:17:47 2004
-\end{verbatim}
-\end{quote}
-If such a file is available, you may abbreviate the inclusion
-code, above, to read:
-\begin{quote}
-\begin{verbatim}
-\usepackage[dvipdfm]{graphicx}
-...
-\includegraphics{photo}
-\end{verbatim}
-\end{quote}
-which makes the operation feel as simple as does including
-\extension{eps} images in a \LaTeX{} file for processing with
-\ProgName{dvips}; the \Package{graphicx} package knows to look for a
-\extension{bb} file if no bounding box is provided in the
-\csx{includegraphics} command.
-
-The one place where usage isn't quite so simple is the need to quote
-\ProgName{dvipdfm} explicitly, as an option when loading the
-\Package{graphicx} package: if you are using \ProgName{dvips}, you
-don't ordinarily need to specify the fact, since the default graphics
-configuration file (of most distributions) ``guesses'' the
-\texttt{dvips} option if you're using \TeX{}.
-\begin{ctanrefs}
-\item[dvipdfm]\CTANref{dvipdfm}
-\item[dvipdfmx]\CTANref{dvipdfmx}
-\item[ebb]Distributed as part of \CTANref{dvipdfm}
-\end{ctanrefs}
-\LastEdit{2013-06-03}
-
-\Question[Q-grffilenames]{``Modern'' graphics file names}
-
-\TeX{} was designed in a world where file names were very simple
-indeed, typically strictly limited both in character set and length.
-In modern systems, such restrictions have largely disappeared, which
-leaves \TeX{} rather at odds with its environment.  Particular
-problems arise with spaces in file names, but things like multiple
-period characters can seriously confuse the \Package{graphics}
-package.
-
-The specification of \TeX{} leaves some leeway for distributions to
-adopt file access appropriate to their operating system, but this
-hasn't got us very far.  Many modern distributions allow you to
-specify a file name as \texttt{"file name.tex"} (for example), which
-helps somewhat, but while this allows us to say
-\begin{quote}
-\begin{verbatim}
-\input "foo bar.tex"
-\end{verbatim}
-\end{quote}
-the analogous usage
-\begin{quote}
-\begin{verbatim}
-\includegraphics{"gappy graphics.eps"}
-\end{verbatim}
-\end{quote}
-using ``ordinary'' \LaTeX{} causes confusion in \ProgName{xdvi} and
-\ProgName{dvips}, even though it works at compilation time.  Sadly,
-even within such quotes, multiple dots give \csx{includegraphics}
-difficulties.  Note that
-\begin{quote}
-\begin{verbatim}
-\includegraphics{"gappy graphics.pdf"}
-\end{verbatim}
-\end{quote}
-works in a similar version of \PDFTeX{}.
-
-If you're using the \Package{graphics} package, the \Package{grffile}
-package will help.  The package offers several options, the simplest
-of which are \pkgoption{multidot} (allowing more than one dot in a
-file name) and \pkgoption{space} (allowing space in a file name).  The
-\pkgoption{space} option requires that you're running on a
-sufficiently recent version of \PDFTeX{}, in \acro{PDF} mode~--- and
-even then it won't work for \MP{} files, which are read as \TeX{}
-input, and therefore use the standard input mechanism).
-\begin{ctanrefs}
-\item[grffile.sty]Distributed as part of \CTANref{oberdiek}[grffile]
-\end{ctanrefs}
-
-\Question[Q-graphicspath]{Importing graphics from ``somewhere else''}
-
-By default, graphics commands like \csx{includegraphics} look
-``wherever \TeX{} files are found'' for the graphic file they're being
-asked to use.  This can reduce your flexibility if you choose to hold
-your graphics files in a common directory, away from your \AllTeX{}
-sources.
-
-The simplest solution is to patch \TeX{}'s path, by changing the
-default path.  On most systems, the default path is taken from the
-environment variable \texttt{TEXINPUTS}, if it's present; you can adapt that
-to take in the path it already has, by setting the variable to
-\begin{quote}
-\begin{verbatim}
-TEXINPUTS=.:<graphics path(s)>:
-\end{verbatim}
-\end{quote}
-on a Unix system; on a Windows system the separator will be ``\texttt{;}''
-rather than ``\texttt{:}''.  The ``\texttt{.}'' is there to ensure
-that the current directory is searched first; the trailing
-``\texttt{:}'' says ``patch in the value of \texttt{TEXINPUTS} from
-your configuration file, here''.
-
-This method has the merit of efficiency (\AllTeX{} does \emph{all} of
-the searches, which is quick), but it's always clumsy and may prove
-inconvenient to use in Windows setups (at least).
-
-The alternative is to use the \Package{graphics} package command
-\csx{graphicspath}; this command is of course also available to users
-of the \Package{graphicx} and the \Package{epsfig} packages.  The
-syntax of \csx{graphicspath}'s one argument is slightly odd: it's a
-sequence of paths (typically relative paths), each of which is
-enclosed in braces.  A slightly odd example (slightly modified from one
-given in the \Package{graphics} bundle documentation) is:
-\begin{quote}
-\begin{verbatim}
-\graphicspath{{eps/}{png/}}
-\end{verbatim}
-\end{quote}
-which will search for graphics files in subdirectories \File{eps} and
-\File{png} of the directory in which \latex{} is running.  (Note that
-the trailing ``\texttt{/}'' \emph{is} required.)
-
-(Note that some \AllTeX{} systems will only allow you to use files in
-the current directory and its sub-directories, for security reasons.
-However, \csx{graphicspath} imposes no such restriction: as far as
-\emph{it} is concerned, you can access files anywhere.)
-
-Be aware that \csx{graphicspath} does not affect the operations of
-graphics macros other than those from the graphics bundle~--- in
-particular, those of the outdated \Package{epsf} and
-\Package{psfig} packages are immune.
-
-The slight disadvantage of the \csx{graphicspath} method is
-inefficiency.  The package will call \AllTeX{} once for each entry in
-the list to look for a file, which of course slows things.  Further,
-\AllTeX{} remembers the name of any file it's asked to look up, thus
-effectively losing memory, so that in the limit a document that uses a
-huge number of graphical inputs could be embarrassed by lack of
-memory.  (Such ``memory starvation'' is pretty unlikely with any
-ordinary document in a reasonably modern \AllTeX{} system, but it
-should be borne in mind.)
-
-If your document is split into a variety of directories, and each
-directory has its associated graphics, the \Package{import} package
-may well be the thing for you; see the discussion % beware line break
-\latexhtml{of ``bits of document in other directories'' (}{in the question ``}%
-\Qref{bits of document in other directories}{Q-docotherdir}%
-\latexhtml{)}{''}.
-\begin{ctanrefs}
-\item[graphics \nothtml{\rmfamily}bundle]\CTANref{graphics}
-\item[import.sty]\CTANref{import}
-\end{ctanrefs}
-
-\Question[Q-graph-pspdf]{Portable imported graphics}
-
-A regular need is a document to be distributed in more than
-one format: commonly both \PS{} and \acro{PDF}.  The
-following advice is based on a post by one with much experience of
-dealing with the problem of dealing with \acro{EPS} graphics in this
-case.
-\begin{itemize}
-\item Don't specify a driver when loading loading whichever version of
-  the \Package{graphics} package you use.  The scheme relies on the
-  distribution's ability to decide which driver is going to be used:
-  the choice is between \ProgName{dvips} and \PDFTeX{}, in this case.
-  Be sure to exclude options \pkgoption{dvips}, \pkgoption{pdftex} and
-  \pkgoption{dvipdfm} (\ProgName{dvipdfm} is not used in this scheme,
-  but the aspirant \acro{PDF}-maker may be using it for his output,
-  before switching to the scheme).
-\item Use \cmdinvoke{includegraphics}[...]{filename} without
-  specifying the extension (i.e., neither \extension{eps} nor
-  \extension{pdf}).
-\item For every \extension{eps} file you will be including, produce a
-  \extension{pdf} version, as described in % beware line break
-  \Qref[question]{Graphics in \PDFLaTeX{}}{Q-pdftexgraphics}.  Having
-  done this, you will have two copies of each graphic (a \extension{eps}
-  and a \extension{pdf} file) in your directory.
-\item Use \PDFLaTeX{} (rather than
-  \LaTeX{}--\ProgName{dvips}--distillation or
-  \LaTeX{}--\ProgName{dvipdfm}) to produce your \acro{PDF} output.
-\end{itemize}
-\ProgName{Dvipdfm}'s charms are less than attractive here: the
-document itself needs to be altered from its default
-(\ProgName{dvips}) state, before \ProgName{dvipdfm} will process it.
-
-\Question[Q-repeatgrf]{Repeated graphics in a document}
-
-A logo or ``watermark'' image, or any other image that is repeated in
-your document, has the potential to make the processed version of the
-document unmanageably large.  The problem is, that the default
-mechanisms of graphics usage add the image at every point it's to be
-used, and when processed, the image appears in the output file at each
-such point.
-
-Huge \PS{} files are embarrassing; explaining \emph{why} such a file
-is huge, is more embarrassing still.
-
-The \Qref*{\File{epslatex} graphics tutorial}{Q-tutbitslatex}
-describes a technique for avoiding the problem: basically, one
-converts the image that's to be repeated into a \PS{} subroutine, and
-load that as a \ProgName{dvips} prologue file.  In place of the image,
-you load a file (with the same bounding box as the image) containing
-no more than an invocation of the subroutine defined in the prologue.
-
-The \File{epslatex} technique is tricky, but does the job.  Trickier
-still is the neat scheme of converting the figure to a one-character
-Adobe Type~3 outline font.  While this technique is for the ``real
-experts'' only (the author of this answer has never even tried it), it has
-potential for the same sort of space saving as the \File{epslatex}
-technique, with greater flexibility in actual use.
-
-More practical is Hendri Adriaens' \Package{graphicx-psmin}; you load
-this \emph{in place} of \Package{graphicx}, so rather than:
-\begin{quote}
-\begin{verbatim}
-\usepackage[<options>]{graphicx}
-\end{verbatim}
-\end{quote}
-you will write:
-\begin{quote}
-\begin{verbatim}
-\usepackage[<options>]{graphicx-psmin}
-\end{verbatim}
-\end{quote}
-and at the start of your document, you write:
-\begin{quote}
-\begin{verbatim}
-\loadgraphics[<bb>]{<list of graphics>}
-\end{verbatim}
-\end{quote}
-and each of the graphics in the list is converted to an ``object'' for
-use within the resulting \PS{} output.  (This is, in essence, an
-automated version of the \File{epslatex} technique described above.)
-
-Having loaded the package as above, whenever you use
-\csx{includegraphics}, the command checks if the file you've asked for
-is one of the graphics in \csx{loadgraphics}' list.  If so, the
-operation is converted into a call to the ``object'' rather than a new
-copy of the file; the resulting \PS{} can of course be \emph{much} smaller.
-
-Note that the package requires a recent \ProgName{dvips}, version
-5.95b (this version isn't~--- yet~--- widely distributed).
-
-If your \PS{} is destined for conversion to \acro{PDF}, either by a
-\href{http://www.ghostscript.com/}{\ProgName{ghostscript}}-based
-mechanism such as \ProgName{ps2pdf} or by
-(for example) \ProgName{Acrobat} \ProgName{Distiller}, the issue isn't
-so pressing, since the distillation mechanism will amalgamate graphics
-objects whether or not the \PS{} has them amalgamated.  \PDFTeX{} does
-the same job with graphics, automatically converting multiple uses
-into references to graphics objects.
-\begin{ctanrefs}
-\item[graphicx-psmin.sty]\CTANref{graphicx-psmin}
-\end{ctanrefs}
-\LastEdit{2013-06-03}
-
-\Question[Q-grmaxwidth]{Limit the width of imported graphics}
-
-Suppose you have graphics which may or may not be able to fit within
-the width of the page; if they will fit, you want to set them at their
-natural size, but otherwise you want to scale the whole picture so
-that it fits within the page width.
-
-You do this by delving into the innards of the graphics package (which
-of course needs a little \LaTeX{} internals programming):
-\begin{quote}
-\begin{verbatim}
-\makeatletter
-\def\maxwidth{%
-  \ifdim\Gin@nat@width>\linewidth
-    \linewidth
-  \else
-    \Gin@nat@width
-  \fi
-}
-\makeatother
-\end{verbatim}
-\end{quote}
-This defines a ``variable'' width which has the properties you want.
-Replace \csx{linewidth} if you have a different constraint on the width
-of the graphic.
-
-Use the command as follows:
-\begin{quote}
-\begin{verbatim}
-\includegraphics[width=\maxwidth]{figure}
-\end{verbatim}
-\end{quote}
-
-\Question[Q-topgraph]{Top-aligning imported graphics}
-
-When \TeX{} sets a line of anything, it ensures that the base-line of
-each object in the line is at the same level as the base-line of the
-final object.  (Apart, of course, from \csx{raisebox} commands\dots{})
-
-Most imported graphics have their base-line set at the bottom of the
-picture.  When using packages such as \Package{subfig}, one often
-wants to align figures by their tops.  The following odd little bit of
-code does this:
-\begin{quote}
-\begin{verbatim}
-\vtop{%
-  \vskip0pt
-  \hbox{%
-    \includegraphics{figure}%
-  }%
-}
-\end{verbatim}
-\end{quote}
-The \csx{vtop} primitive sets the base-line of the resulting object to
-that of the first ``line'' in it; the \csx{vskip} creates the illusion
-of an empty line, so \csx{vtop} makes the very top of the box into the
-base-line.
-
-In cases where the graphics are to be aligned with text, there is a
-case for making the base-line one ex-height below the top of the box,
-as in:
-\begin{quote}
-\begin{verbatim}
-\vtop{%
-  \vskip-1ex
-  \hbox{%
-    \includegraphics{figure}%
-  }%
-}
-\end{verbatim}
-\end{quote}
-A more \LaTeX{}-y way of doing the job (somewhat inefficiently) uses
-the \Package{calc} package:
-\begin{quote}
-\begin{verbatim}
-\usepackage{calc}
-...
-\raisebox{1ex-\height}{\includegraphics{figure}}
-\end{verbatim}
-\end{quote}
-(this has the same effect as the text-align version, above).
-
-The fact is, \emph{you} may choose where the base-line ends up.  This
-answer merely shows you sensible choices you might make.
-
-\Question[Q-mpprologues]{Displaying \MP{} output in \ProgName{ghostscript}}
-
-\MP{} ordinarily expects its output to be included in some context
-where the `standard' \MF{} fonts (that you've specified) are already
-defined~--- for example, as a figure in \TeX{} document.  If you're
-debugging your \MP{} code, you may want to view it in a
-\href{http://www.ghostscript.com/}{\ProgName{ghostscript}}-based (or some
-other \PS{}) previewer, but note that viewers (even
-\href{http://www.ghostscript.com/}{\ProgName{ghostscript}})
-\emph{don't} ordinarily have the fonts loaded, and you'll experience
-an error such as
-\begin{quote}
-\begin{verbatim}
-Error: /undefined in cmmi10
-\end{verbatim}
-\end{quote}
-There is provision in \MP{} for avoiding this problem: issue the
-command \texttt{prologues := 2;} at the start of the \extension{mp} file.
-
-Unfortunately, the \PS{} that \MP{} inserts in its output,
-following this command, is incompatible with ordinary use of the
-\PS{} in inclusions into \AllTeX{} documents, so it's best to
-make the \texttt{prologues} command optional.  Furthermore, \MP{} takes a
-very simple-minded approach to font encoding: since \TeX{} font
-encodings are anything but simple, encoding of text in diagrams are
-another source of problems.  If you're suffering such problems (the
-symptom is that 
-characters disappear, or are wrongly presented) the solution is
-to view the `original' \MP{} output after processing through
-\LaTeX{} and \ProgName{dvips}.
-
-Conditional compilation may be done either
-by inputting \File{MyFigure.mp} indirectly from a simple wrapper
-\File{MyFigureDisplay.mp}:
-\begin{quote}
-\begin{verbatim}
-prologues := 2;
-input MyFigure
-\end{verbatim}
-\end{quote}
-or by issuing a shell command such as
-\begin{quote}
-\begin{verbatim}
-mp '\prologues:=2; input MyFigure'
-\end{verbatim}
-\end{quote}
-(which will work without the quote marks if you're not using a Unix
-shell).
-
-A suitable \LaTeX{} route would involve processing
-\File{MyFigure.tex}, which contains:
-\begin{quote}
-\begin{verbatim}
-\documentclass{article}
-\usepackage{graphicx}
-\begin{document}
-\thispagestyle{empty}
-\includegraphics{MyFigure.1}
-\end{document}
-\end{verbatim}
-\end{quote}
-Processing the resulting \acro{DVI} file with the \ProgName{dvips}
-command
-\begin{quote}
-\begin{verbatim}
-dvips -E -o MyFigure.eps MyFigure
-\end{verbatim}
-\end{quote}
-would then give a satisfactory Encapsulated \PS{} file.  This
-procedure may be automated using the \ProgName{Perl} script
-\ProgName{mps2eps}, thus saving a certain amount of tedium.
-
-The \plaintex{} user may use an adaptation, by
-Dan Luecking, of a jiffy of Knuth's.  Dan's version
-\Package{mpsproof.tex} will work under
-\TeX{} to produce a \acro{DVI} file for use with \ProgName{dvips}, or
-under \PDFTeX{} to produce a \acro{PDF} file, direct.  The output is
-set up to look like a proof sheet.
-
-A script application, \ProgName{mptopdf}, is available in recent
-\AllTeX{} distributions: it seems fairly reliably to produce
-\acro{PDF} from \MP{}, so may reasonably be considered an answer to
-the question\dots{}
-\begin{ctanrefs}
-\item[mps2eps]\CTANref{mps2eps}
-\item[mpsproof.tex]Distributed as part of the \MP{} distribution \CTANref{metapost}
-\item[mptopdf]Part of \CTANref{pdftex-graphics}
-\end{ctanrefs}
-\LastEdit{2013-04-23}
-
-\Question[Q-drawing]{Drawing with \TeX{}}
-
-There are many packages to do pictures in \AllTeX{} itself (rather than
-importing graphics created externally), ranging from simple use of
-\LaTeX{} \environment{picture} environment, through enhancements like
-\ProgName{eepic}, to 
-sophisticated (but slow) drawing with \pictex{}. Depending on your type
-of drawing, and setup, here are a few systems you may consider:
-\begin{itemize}
-\item The \environment{picture} environment provides rather primitive
-  drawing capabilities (anything requiring more than linear
-  calculations is excluded, unless a font can come to your help).  The
-  environment's tedious insistence on its own \csx{unitlength}, as the
-  basic measurement in a diagram, may be avoided by use of the
-  \Package{picture} package, which detects whether a length is quoted
-  as a number or as a length, and acts accordingly.
-\item \Package{epic} was designed to make use of the \LaTeX{}
-  \environment{picture} environment somewhat less agonising;
-  \Package{eepic} extends it, and is capable of using \ProgName{tpic}
-  \csx{special} commands to improve printing performance.  (If the
-  \csx{special}s aren't available, the \Package{eepicemu} will do the
-  business, far less efficiently.
-\item \Package{pict2e}; this was advertised in % !line break
-  \Qref*{the \LaTeX{} manual}{Q-latex-books}, but didn't appear for nearly
-  ten years after publication of the book!  It removes all the petty
-  restrictions that surround the use of the \environment{picture}
-  environment.  It therefore suffers \emph{only} from the rather
-  eccentric drawing language of the environment, and is a far more
-  useful tool than the original environment has ever been.  (Note that
-  \Package{pict2e} supersedes David Carlisle's stop-gap
-  \Package{pspicture}.)
-\item \pictex{} is a venerable, and very powerful, system, that draws
-  by placing dots on the page to give the effect of a line or curve.  While
-  this has the potential of great power, it is (of course) much slower
-  than any of the other established packages.  What's more, there
-  are problems with its \Qref*{documentation}{Q-docpictex}.
-\item \Package{PSTricks} gives you access to the (considerable) power of
-  \PS{} via a set of \tex{} macros, which talk to \PS{} using 
-  \Qref*{\csx{special} commands}{Q-specials}.  Since \PS{} is itself a
-  pretty powerful programming language, many astounding things can in
-  principle be achieved using \Package{PSTricks} (a wide range of
-  contributed packages, ranging from world mapping to lens design
-  diagrams, is available).
-  \Package{Pstricks}' \csx{special}s are
-  by default specific to \ProgName{dvips}, but there is
-  a \Package{Pstricks} `driver' that allow \Package{Pstricks} to
-  operate under \xetex{}.  \PDFTeX{} users may use \Package{pst-pdf},
-  which (like \Package{epstopdf}~--- see % ! line break
-  \Qref[question]{\PDFLaTeX{} graphics}{Q-pdftexgraphics}) generates
-  \acro{PDF} files using an auxiliary program, from \Package{PSTricks}
-  commands (\Package{pst-pdf} also requires a recent installation of
-  the \Package{preview} package).
-
-  There is a \Package{PSTricks} mailing list
-  (\mailto{pstricks@tug.org}) which you may
-  \href{http://tug.org/mailman/listinfo/pstricks}{join}, or you may
-  just browse the % ! line break
-  \href{http://tug.org/pipermail/pstricks/}{list archives}.
-\item \Package{pgf}: while \Package{pstricks} is very powerful and
-  convenient from `traditional' \tex{}, using it with \PDFLaTeX{} is
-  pretty tiresome: if you 
-  simply want the graphical capabilities, \Package{pgf}, together with
-  its ``user-oriented'' interface \Package{tikz}, may be a good
-  bet for you.  While \acro{PDF} has (in essence) the same graphical
-  capabilities as \PS{}, it isn't programmable; \Package{pgf} provides
-  \LaTeX{} commands that will utilise the graphical capabilities of
-  both \PS{} and \acro{PDF} equally.  \Package{Pgf} has extensive
-  mathematical support, which allows it to rival \Package{PSTricks}'
-  use of the computation engine within \PS{}.
-  The \Package{pgf} manual is enormous, but a simple introduction which
-  allows the user to get a feel for the capabilities of the system, is
-  available at \url{http://cremeronline.com/LaTeX/minimaltikz.pdf}
-\item \MP{}; you liked \MF{}, but never got to grips with font files?
-  Try \Qref*{\MP{}}{Q-MP}~---
-  all the power of \MF{}, but it generates \PS{} figures; \MP{}
-  is nowadays part of most serious \AllTeX{} distributions.  Knuth
-  uses it for all his work\dots{}
-
-  Note that you can % ! line break
-  \Qref*{``embed'' \MP{} source in your document}{Q-inlgrphapp} (i.e.,
-  keep it in-line with your \latex{} code).
-\item You liked \MF{} (or \MP{}), but find the language difficult?
-  \ProgName{Mfpic} makes up \MF{} or \MP{} code for you using
-  familiar-looking \AllTeX{} macros.  Not \emph{quite} the full power
-  of \MF{} or \MP{}, but a friendlier interface, and with \MP{} output
-  the results can be used equally well in either \LaTeX{} or \PDFLaTeX{}.
-\item You liked \pictex{} but don't have enough memory or time?  Look
-  at the late Eitan Gurari's \Package{dratex}: it is just as powerful,
-  but is an entirely new implementation which is not as hard on
-  memory, is much more readable and is (admittedly sparsely) documented at
-  \url{http://www.cse.ohio-state.edu/~gurari/tpf/html/README.html},
-  as well as in the author's book ``TeX and LATeX: Drawing and
-  Literate Programming'', which remains available from on-line
-  booksellers.
-\end{itemize}
-
-In addition, there are several means of generating code for your
-graphics application (\ProgName{asymptote}, \ProgName{gnuplot} and
-\MP{}, at least) in-line in your document, and then have them
-processed in a command spawned from your \AllTeX{} run.  For details,
-see \Qref{question}{Q-inlgrphapp}.
-\begin{ctanrefs}
-\item[dratex.sty]\CTANref{dratex}
-\item[epic.sty]\CTANref{epic}
-\item[eepic.sty]\CTANref{eepic}
-\item[eepicemu.sty]\CTANref{eepic}
-\item[mfpic]\CTANref{mfpic}
-\item[preview.sty]\CTANref{preview}
-\item[pspicture.sty]\CTANref{pspicture}
-\item[pst-pdf.sty]\CTANref{pst-pdf}
-\item[pgf.sty]\CTANref{pgf}
-\item[pict2e.sty]\CTANref{pict2e}
-\item[pictex.sty]\CTANref{pictex}
-\item[picture.sty]Distributed as part of \CTANref{oberdiek}[picture]
-\item[pstricks]\CTANref{pstricks}
-\item[tikz.sty]Distributed as part of \CTANref{pgf}
-\end{ctanrefs}
-\LastEdit{2012-10-19}
-
-\Question[Q-inlgrphapp]{In-line source for graphics applications}
-
-Some of the free-standing graphics applications may also be used
-(effectively) in-line in \latex{} documents; examples are
-\begin{booklist}
-\item[asymptote]The package \Package{asymptote} (provided in the
-  \ProgName{asymptote} distribution) defines an environment
-  \environment{asy} which arranges that its contents are available for
-  processing, and will therefore be typeset (after ``enough'' runs, in
-  the `usual' \latex{} way).
-
-  Basically, you write
-  \begin{quote}
-    \cmdinvoke{begin}{asy}\\
-    \latexhtml{\hspace*{1em}}{~~}\texttt{\meta{asymptote code}}\\
-    \cmdinvoke{end}{asy}
-  \end{quote}
-  and then execute
-\begin{quote}
-\begin{verbatim}
-latex document
-asy document-*.asy
-latex document
-\end{verbatim}
-\end{quote}
-\item[egplot]Allows you to incorporate \ProgName{GNUplot}
-  instructions in your document, for processing outside of \latex{}.
-  The package provides commands that enable the user to do calculation
-  in \ProgName{GNUplot}, feeding the results into the diagram
-  to be drawn.
-\item[gmp]Allows you to include the source of MetaPost diagrams, with
-  parameters of the diagram passed from the environment call.
-\item[emp]An earlier package providing facilities similar to those of
-  \Package{gmp} (\Package{gmp}'s author hopes that his package will
-  support the facilities \Package{emp}, which he believes is in need
-  of update.)
-\item[mpgraphics]Again, allows you to program parameters of \MP{}
-  diagrams from your \latex{} document, including the preamble details
-  of the \latex{} code in any recursive call from \MP{}.
-\end{booklist}
-In all cases (other than \Package{asymptote}), these packages require
-that you can % ! line break
-\Qref*{run external programs from within your document}{Q-spawnprog}.
-\begin{ctanrefs}
-\item[asymptote.sty]\CTANref{asymptote}
-\item[egplot.sty]\CTANref{egplot}
-\item[emp.sty]\CTANref{emp}
-\item[gmp.sty]\CTANref{gmp}
-\item[mpgraphics.sty]\CTANref{mpgraphics}
-\end{ctanrefs}
-\LastEdit*{2011-03-16}
-
-\Question[Q-drawFeyn]{Drawing Feynman diagrams in \LaTeX{}}
-
-Michael Levine's \Package{feynman} bundle for drawing the diagrams in
-\LaTeXo{} is still available.
-
-Thorsten Ohl's \Package{feynmf} is designed for use with current
-\LaTeX{}, and works in
-combination with \MF{} (or, in its \Package{feynmp} incarnation, with
-\MP{}).  The \ProgName{feynmf} or
-\ProgName{feynmp} package reads a description of the diagram written
-in \TeX{}, and writes out code.  \MF{} (or \MP{}) can then produce a
-font (or \PS{} file) for use in a subsequent \LaTeX{} run.  For
-new users, who have access to \MP{}, the \PS{} version is
-probably the better route, for document portability and other reasons.
-% checked rf 2001/03/22
-
-Jos Vermaseren's \Package{axodraw} is mentioned as an alternative in
-the documentation of \Package{feynmf}, but it is written entirely in
-terms of \ProgName{dvips} \csx{special} commands, and is thus rather
-imperfectly portable.
-
-An alternative approach is implemented by Norman Gray's \Package{feyn}
-package.  Rather than creating complete diagrams as postscript images,
-\Package{feyn} provides a font (in a variety of sizes) containing
-fragments, which you can compose to produce complete diagrams.  It
-offers fairly simple diagrams which look good in equations, rather
-than complicated ones more suitable for display in figures.
-\begin{ctanrefs}
-\item[axodraw]\CTANref{axodraw}
-\item[feyn \nothtml{\rmfamily}font bundle]\CTANref{feyn}
-\item[feynman bundle]\CTANref{feynman}
-\item[feynmf/feynmp bundle]\CTANref{feynmf}
-\end{ctanrefs}
-
-\Question[Q-labelfig]{Labelling graphics}
-
-``Technical'' graphics (such as graphs and diagrams) are often
-labelled with quite complex mathematical expressions: there are few
-drawing or graphing tools that can do such things (the honourable
-exception being \MP{}, which allows you to program the labels, in
-\AllTeX{}, in the middle of specifying your graphic).
-
-Placing `labels' on graphics produced by all those \emph{other} tools is
-what we discuss here.  (Note that the term ``label'' should be
-liberally interpreted; many of the techniques \emph{were} designed for
-use when applying labels to figures, but they may be used equally well
-to draw funny faces on a figure \dots{} or anything.
-
-The time-honoured \Package{psfrag} package can help, if your image is
-included as an (encapsulated) \PS{} file.  Place an unique
-text in your graphic, using the normal text features of your tool, and
-you can ask \Package{psfrag} to replace the text with arbitrary
-\AllTeX{} material.  \Package{Psfrag}'s ``operative'' command is
-\cmdinvoke{psfrag}{\emph{Orig text}}{\emph{Repl text}}, which
-instructs the system to replace the original (``unique'') text with
-the \TeX{}-typeset replacement text.  Optional arguments permit
-adjustment of position, scale and rotation; full details may be found
-in \File{pfgguide} in the distribution.
-
-Since \Package{psfrag} works in terms of (encapsulated) \PS{} files,
-it needs extra work for use with \PDFLaTeX{}.  Two techniques are
-available, using \Qref*{\Package{pst-pdf} package}{Q-pdftexgraphics}
-in a mode designed to do this work; and using \Package{pdfrack}.
-
-The \Qref*{\Package{Pst-pdf} package}{Q-pdftexgraphics} can support
-this ``extra work'' usage.  In fact, the \Package{pst-pdf} support
-package \Package{auto-pst-pdf} offers a configuration setting
-precisely for use with \Package{psfrag}.
-
-If you have the `right' environment (see below), you could try the
-\Package{pdfrack} script bundle.  The script aims to cut each figure
-out of your source, using it to produce a small \latex{} file with
-nothing but the figure inclusion commands.  Each of these figure files
-is then processed to \PS{}, compiled using the \csx{psfrag} commands,
-and the resulting output converted to \acro{PDF} again.
-
-\Package{Pdfrack} is written to use the Unix Bourne shell (or
-equivalent); thus your environment needs to be a Unix-based system, or
-some equivalent such as \ProgName{cygwin} under windows.  (What is
-more, \Package{pdfrack}'s author is rather disparaging about his
-package; the present author has never tried it.)
-
-The \Package{psfragx} package goes one step further than
-\Package{psfrag}: it provides a means whereby you can put the
-\Package{psfrag} commands into the preamble of your \acro{EPS} file
-itself.  \Package{Psfrag} has such a command itself, but deprecates
-it; \Package{psfragx} has cleaned up the facility, and provides a
-script \ProgName{laprint} for use with \ProgName{Matlab} to produce
-appropriately tagged output.  (In principle, other graphics
-applications could provide a similar facility, but apparently none does.)
-
-\ProgName{Emacs} users may find the embedded editor \ProgName{iTe} a
-useful tool for placing labels: it's a \AllTeX{}-oriented graphical
-editor written in \ProgName{Emacs Lisp}.  You create
-\environment{iteblock} environments containing graphics and text, and
-may then invoke \ProgName{iTe} to arrange the elements relative to one
-another.
-
-Another useful approach is \Package{overpic}, which overlays a
-\environment{picture} environment on a graphic included by use of
-\csx{includegraphics}.  This treatment lends itself to ready placement
-of texts and the like on top of a graphic.  The package can draw a
-grid for planning your ``attack''; the distribution comes with simple
-examples.
-
-The \Package{lpic} package is somewhat similar to \Package{overpic};
-it defines an environment \environment{lpic} (which places your
-graphic for you): within the environment you may use the command
-\csx{lbl} to position \latex{} material at appropriate places over the
-graphic.
-
-\Package{Pinlabel} is another package whose author thought in the same
-sort of way as that of \Package{overpic}; the documentation explains
-in detail how to plan your `labelling attack'~--- in this case by
-loading your figure into a viewer and taking measurements from it.
-(The package discusses direct use of
-\href{http://www.ghostscript.com/}{\ProgName{ghostscript}} as well as
-customised viewers such as
-\href{http://www.ghostgum.com.au/}{\ProgName{gsview}} or
-\ProgName{gv}.)
-
-\Package{Pstricks} can of course do everything
-that \Package{overpic}, \Package{lpic} or \Package{pinlabel}
-can, with all the flexibility of \PS{} programming that it offers.
-This capability is exemplified by the \Package{pst-layout} package,
-which seems to be a superset of both \Package{overpic} and
-\Package{lpic}.
-
-Similarly, \Package{pgf/TikZ} has all the power needed, but no
-explicit package has been released.
-
-The \Package{pstricks} web site has a page with several % ! line break
-\href{http://pstricks.tug.org/main.cgi?file=Examples/overlay}{examples of labelling}
-which will get you started; if \Package{pstricks} is % ! line break
-\Qref*{an option for you}{Q-drawing}, this route is worth a try.
-
-The confident user may, of course, do the whole job in a picture
-environment which itself includes the graphic.  I would recommend
-\Package{overpic} or the \Package{pstricks} approach, but such things
-are plainly little more than a convenience over what is achievable
-with the do-it-yourself approach.
-\begin{ctanrefs}
-\item[auto-pst-pdf.sty]\CTANref{auto-pst-pdf}
-\item[gv]\CTANref{gv}
-\item[iTe]\CTANref{ite}
-\item[laprint]Distributed with \CTANref{psfragx}
-\item[lpic.sty]\CTANref{lpic}
-\item[overpic.sty]\CTANref{overpic}
-\item[pdfrack]\CTANref{pdfrack}
-\item[pinlabel.sty]\CTANref{pinlabel}
-\item[pgf.sty]\CTANref{pgf}
-\item[psfrag.sty]\CTANref{psfrag}
-\item[psfragx.sty]\CTANref{psfragx}
-\item[pstricks.sty]\CTANref{pstricks}
-\item[pst-layout.sty]\CTANref{pst-layout}
-\item[pst-pdf.sty]\CTANref{pst-pdf}
-\end{ctanrefs}
-\LastEdit{2013-06-03}