Initial commit

1 files changed, 841 insertions, 0 deletions

diff --git a/fonts/bbding/bbding.dtx b/fonts/bbding/bbding.dtx
new file mode 100644
index 0000000000..2375cbd587
--- /dev/null
+++ b/fonts/bbding/bbding.dtx
@@ -0,0 +1,841 @@
+%\manfnttrue     ^^A remove this line if the manualfont is not on your system
+%\UsersGuidetrue ^^A remove this line to print the full documentation.
+%
+%\iffalse metacomment
+%  (c)1995--99 Peter Møller Neergaard
+%
+%  This files may be distributed under the terms of the LaTeX Project Public
+%  License, as described in lppl.txt in the base LaTeX distribution.
+%  Either version 1.0 or, at your option, any later version.
+%
+%  For information about the copyright of the metafont sources for bbding,
+%  please refer to the file .....
+%
+%  Install by running tex with "bbding.ins".  
+% 
+%  To get the documentation run latex twice on this file and then print the 
+%  file bbding.dvi.  Note that the documentation can be processed without
+%  the fontmetrices available, the symbols will however be missing.
+%
+%  This file is distributed in the hope that it will be useful,
+%  but WITHOUT ANY WARRANTY; without even the implied warranty of
+%  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. 
+%\fi
+% \CheckSum{643}
+% \CharacterTable
+%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%   Digits        \0\1\2\3\4\5\6\7\8\9
+%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%   Dollar        \$     Percent       \%     Ampersand     \&
+%   Acute accent  \'     Left paren    \(     Right paren   \)
+%   Asterisk      \*     Plus          \+     Comma         \,
+%   Minus         \-     Point         \.     Solidus       \/
+%   Colon         \:     Semicolon     \;     Less than     \<
+%   Equals        \=     Greater than  \>     Question mark \?
+%   Commercial at \@     Left bracket  \[     Backslash     \\
+%   Right bracket \]     Circumflex    \^     Underscore    \_
+%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%   Right brace   \}     Tilde         \~}
+%
+%
+% ^^A I would not like to have the standard LaTeX commands in the index
+% ^^A This is taken from `doc.dtx'
+% \DoNotIndex{\@,\@@par,\@beginparpenalty,\@empty}
+% \DoNotIndex{\@flushglue,\@gobble,\@input}
+% \DoNotIndex{\@makefnmark,\@makeother,\@maketitle}
+% \DoNotIndex{\@namedef,\@ne,\@spaces,\@tempa}
+% \DoNotIndex{\@tempb,\@tempswafalse,\@tempswatrue}
+% \DoNotIndex{\@thanks,\@thefnmark,\@topnum}
+% \DoNotIndex{\@@,\@elt,\@forloop,\@fortmp,\@gtempa,\@totalleftmargin}
+% \DoNotIndex{\",\/,\@ifundefined,\@nil,\@verbatim,\@vobeyspaces}
+% \DoNotIndex{\|,\~,\ ,\active,\advance,\aftergroup,\begingroup,\bgroup}
+% \DoNotIndex{\mathcal,\csname,\def,\documentstyle,\dospecials,\edef}
+% \DoNotIndex{\egroup}
+% \DoNotIndex{\else,\endcsname,\endgroup,\endinput,\endtrivlist}
+% \DoNotIndex{\expandafter,\fi,\fnsymbol,\futurelet,\gdef,\global}
+% \DoNotIndex{\hbox,\hss,\if,\if@inlabel,\if@tempswa,\if@twocolumn}
+% \DoNotIndex{\ifcase}
+% \DoNotIndex{\ifcat,\iffalse,\ifx,\ignorespaces,\index,\input,\item}
+% \DoNotIndex{\jobname,\kern,\leavevmode,\leftskip,\let,\llap,\lower}
+% \DoNotIndex{\m@ne,\next,\newpage,\nobreak,\noexpand,\nonfrenchspacing}
+% \DoNotIndex{\obeylines,\or,\protect,\raggedleft,\rightskip,\rm,\sc}
+% \DoNotIndex{\setbox,\setcounter,\small,\space,\string,\strut}
+% \DoNotIndex{\strutbox}
+% \DoNotIndex{\thefootnote,\thispagestyle,\topmargin,\trivlist,\tt}
+% \DoNotIndex{\twocolumn,\typeout,\vss,\vtop,\xdef,\z@}
+% \DoNotIndex{\,,\@bsphack,\@esphack,\@noligs,\@vobeyspaces,\@xverbatim}
+% \DoNotIndex{\`,\catcode,\end,\escapechar,\frenchspacing,\glossary}
+% \DoNotIndex{\hangindent,\hfil,\hfill,\hskip,\hspace,\ht,\it,\langle}
+% \DoNotIndex{\leaders,\long,\makelabel,\marginpar,\markboth,\mathcode}
+% \DoNotIndex{\mathsurround,\mbox,\newcount,\newdimen,\newskip}
+% \DoNotIndex{\nopagebreak}
+% \DoNotIndex{\parfillskip,\parindent,\parskip,\penalty,\raise,\rangle}
+% \DoNotIndex{\section,\setlength,\TeX,\topsep,\underline,\unskip,\verb}
+% \DoNotIndex{\vskip,\vspace,\widetilde,\\,\%,\@date,\@defpar}
+% \DoNotIndex{\[,\{,\},\]}
+% \DoNotIndex{\count@,\ifnum,\loop,\today,\uppercase,\uccode}
+% \DoNotIndex{\baselineskip,\begin,\tw@}
+% \DoNotIndex{\a,\b,\c,\d,\e,\f,\g,\h,\i,\j,\k,\l,\m,\n,\o,\p,\q}
+% \DoNotIndex{\r,\s,\t,\u,\v,\w,\x,\y,\z,\A,\B,\C,\D,\E,\F,\G,\H}
+% \DoNotIndex{\I,\J,\K,\L,\M,\N,\O,\P,\Q,\R,\S,\T,\U,\V,\W,\X,\Y,\Z}
+% \DoNotIndex{\1,\2,\3,\4,\5,\6,\7,\8,\9,\0}
+% \DoNotIndex{\!,\#,\$,\&,\',\(,\),\+,\.,\:,\;,\<,\=,\>,\?,\_}
+% \DoNotIndex{\discretionary,\immediate,\makeatletter,\makeatother}
+% \DoNotIndex{\meaning,\newenvironment,\par,\relax,\renewenvironment}
+% \DoNotIndex{\repeat,\scriptsize,\selectfont,\the,\undefined}
+% \DoNotIndex{\arabic,\do,\makeindex,\null,\number,\show,\write,\@ehc}
+% \DoNotIndex{\@author,\@ehc,\@ifstar,\@sanitize,\@title,\everypar}
+% \DoNotIndex{\if@minipage,\if@restonecol,\ifeof,\ifmmode}
+% \DoNotIndex{\lccode,\newtoks,\onecolumn,\openin,\p@,\SelfDocumenting}
+% \DoNotIndex{\settowidth,\@resetonecoltrue,\@resetonecolfalse,\bf}
+% \DoNotIndex{\clearpage,\closein,\lowercase,\@inlabelfalse}
+% \DoNotIndex{\selectfont,\mathcode,\newmathalphabet,\rmdefault}
+% \DoNotIndex{\bfdefault}
+%
+% ^^A Exclude commands used for generating the index
+% \DoNotIndex{\CodelineIndex,\DeleteShortVerb,\DisableCrossrefs}
+% \DoNotIndex{\EnableCrossrefs,\OnlyDescription,\RecordChanges}
+%
+% \ifUsersGuide
+%   \OnlyDescription    
+%   \DisableCrossrefs   
+% \else
+%   \RecordChanges      
+% \fi
+% 
+% \GetFileInfo{bbding.sty}
+% 
+% \title{The \bbding-package\thanks
+%   {This file has \fileversion\ and is dated \filedate}}
+% \author{Karel Horak\thanks{Made the \METAFONT-source for the font.} \\
+%         Peter Møller Neergaard\thanks{Implemented the \LaTeXe-package.} \\
+%  \texttt{turtle}@\texttt{diku.dk} \quad \texttt{http://www.diku.dk/students/turtle}\\
+%         Sergue{\"i} Dachian\thanks{Fixed a bug in the symbols for scissors}}
+%
+% \maketitle
+%
+% \begin{abstract}
+%   This package provides an easy-to-use interface to the \texttt{bbding} symbol
+%   set developed by \emph{Karel Horak}.  The naming conventions is made
+%   close to \emph{Zapf-Dingbat} as it can be found in \package{Wordperfect
+%   6.0}, however, sometimes shortening the names.
+% \end{abstract}
+%
+% ^^A Two column table of contents --- borrowed from ``doc.dtx''
+% \ifmulticols
+%   \addtocontents{toc}{\protect\begin{multicols}{2}}
+% \fi
+%
+% {\parskip 0pt                ^^A We have to reset \parskip
+%                              ^^A (bug in \LaTeX)
+% \tableofcontents
+% }
+%
+% A special thought should be given to \emph{Mauro Orlandini} and \emph{Max
+% Hailperin} who developed a macro for setting paragraphs in parallel. This
+% saved me for a lot of work, when developing this manual.
+%
+% \section{Usage and Symbols}
+% 
+% \noindent
+% \bbding\ provides an easy to use interface to the |bbding|-symbolfont
+% set. It is loaded by issusing the command
+% |\usepackage{bbding}| in your document preamble.
+% 
+% You have the symbols shown in the following tables at your disposal. All
+% the symbols are used issuing the command written to the right of the symbol.
+%
+% \begin{figure} \small 
+% \begin{commandsInColumns}{2}
+%   \ScissorRight
+%   \ScissorRightBrokenBottom
+%   \ScissorRightBrokenTop
+%   \ScissorHollowRight
+%   \ScissorLeft
+%   \ScissorLeftBrokenBottom
+%   \ScissorLeftBrokenTop
+%   \ScissorHollowLeft
+% \end{commandsInColumns}
+% \caption{Scissors}
+% \end{figure}
+
+%
+% \begin{figure} \small 
+% \begin{commandsInColumns}{3}
+%   \HandRight
+%   \HandRightUp
+%   \HandCuffRight
+%   \HandCuffRightUp
+%   \HandLeft
+%   \HandLeftUp
+%   \HandCuffLeft
+%   \HandCuffLeftUp
+%   \HandPencilLeft
+% \end{commandsInColumns}
+% \caption{Hands}
+% \end{figure}
+%
+% \begin{figure} \small 
+% \begin{commandsInColumns}{3}
+%   \PencilRight
+%   \PencilRightUp
+%   \PencilRightDown
+%   \PencilLeft
+%   \PencilLeftUp
+%   \PencilLeftDown
+%   \NibRight
+%   \NibSolidRight
+%   \NibLeft
+%   \NibSolidLeft
+% \end{commandsInColumns}
+% \caption{Writing tools}
+% \end{figure}
+%
+% \begin{figure} \small 
+% \begin{commandsInColumns}{3}
+%   \XSolid
+%   \XSolidBold
+%   \XSolidBrush
+%   \Plus
+%   \PlusOutline
+%   \PlusCenterOpen
+%   \PlusThinCenterOpen
+%   \Cross
+%   \CrossOpenShadow
+%   \CrossOutline
+%   \CrossBoldOutline
+%   \CrossClowerTips
+%   \CrossMaltese
+% \end{commandsInColumns}
+% \caption{Crosses, plusses and the like}
+% \end{figure}
+%
+% \begin{figure} \small 
+% \begin{commandsInColumns}{3}
+%   \DavidStar
+%   \DavidStarSolid
+%   \JackStar
+%   \JackStarBold
+%   \FourStar
+%   \FourStarOpen
+%   \FiveStar
+%   \FiveStarLines
+%   \FiveStarOpen
+%   \FiveStarOpenCircled
+%   \FiveStarCenterOpen
+%   \FiveStarOpenDotted
+%   \FiveStarOutline
+%   \FiveStarOutlineHeavy
+%   \FiveStarConvex
+%   \FiveStarShadow
+%   \SixStar
+%   \EightStar
+%   \EightStarBold
+%   \EightStarTaper
+%   \EightStarConvex
+%   \TwelweStar
+%   \SixteenStarLight
+%   \Asterisk
+%   \AsteriskBold
+%   \AsteriskCenterOpen
+%   \AsteriskThin
+%   \AsteriskThinCenterOpen
+%   \AsteriskRoundedEnds
+%   \FourAsterisk
+%   \EightAsterisk
+% \end{commandsInColumns}
+% \caption{All kind of stars}
+% \end{figure}
+%
+% \begin{figure} \small 
+% \begin{commandsInColumns}{2}
+%   \FiveFlowerOpen
+%   \FiveFlowerPetal
+%   \SixFlowerOpenCenter
+%   \SixFlowerRemovedOpenPetal
+%   \SixFlowerAlternate
+%   \SixFlowerAltPetal
+%   \SixFlowerPetalDotted
+%   \SixFlowerPetalRemoved
+%   \EightFlowerPetalRemoved
+%   \EightFlowerPetal
+%   \FourClowerOpen
+%   \FourClowerSolid
+%   \Sparkle
+%   \SparkleBold
+%   \SnowflakeChevron
+%   \SnowflakeChevronBold
+%   \Snowflake
+% \end{commandsInColumns}
+% \caption{Flowers, snowflakes and the like}
+% \end{figure}
+%
+% \begin{figure} \small 
+% \begin{commandsInColumns}{2}
+%   \CircleSolid
+%   \CircleShadow
+%   \HalfCircleRight
+%   \HalfCircleLeft
+%   \Ellipse
+%   \EllipseSolid
+%   \EllipseShadow
+%   \Square
+%   \SquareSolid
+%   \SquareShadowBottomRight
+%   \SquareShadowTopRight
+%   \SquareShadowTopLeft
+%   \SquareCastShadowBottomRight
+%   \SquareCastShadowTopRight
+%   \SquareCastShadowTopLeft
+%   \TriangleUp
+%   \TriangleDown
+%   \DiamondSolid
+%   \OrnamentDiamondSolid
+%   \RectangleThin
+%   \Rectangle
+%   \RectangleBold
+% \end{commandsInColumns}
+% \caption{Geometrical Shapes}
+% \end{figure}
+%
+% \begin{figure} \small 
+% \begin{commandsInColumns}{3}
+%   \Phone
+%   \PhoneHandset
+%   \Tape
+%   \Plane
+%   \Envelope
+%   \Peace
+%   \Checkmark
+%   \CheckmarkBold
+%   \SunshineOpenCircled
+%   \ArrowBoldRightStrobe
+%   \ArrowBoldUpRight
+%   \ArrowBoldDownRight
+%   \ArrowBoldRightShort
+%   \ArrowBoldRightCircled
+% \end{commandsInColumns}
+% \caption{Miscellaneous}
+% \end{figure}
+% \clearpage
+% \section{How to Install \texttt{bbding}}
+% 
+% I suppose that you have already got the file |bbding10.mf| containing the \METAFONT-source for the
+% \bbding-symbol set from your nearest CTAN-site. It should be placed in a
+% directory, where it can be found by \METAFONT. 
+% 
+% Then generate the font-metrices |bbding10.tfm| using \METAFONT\ (ask your
+% system administrator for details). This is done from a command line issusing, say:
+% \begin{code}
+%   |metafont \mode=|\meta{localmode}|; input bbding10|
+% \end{code}
+% where \meta{localmode} is one of the modes defined in your local setup
+% file, |local.mf|, for \METAFONT. Move the resulting |bbding10.tfm|
+% to a directory in the path, where \LaTeX\ looks for |.tfm|-files. If it
+% had also generated the bitmap-file, move it to a location, where you
+% favourite DVI-viewer can find it.
+% 
+% As the last thing  install the package file, by running \TeX\ 
+% with the file |bbding.ins|. This generates two files: |bbding.sty| and
+% |Uding.fd|. |bbding.sty| is the packages file, which is loaded by
+% \LaTeX\ and |Uding.fd| contains the loading information about the font.
+% 
+% If the manualfont |manfnt.tfm|---which is only used to generate the logo
+% for \METAFONT---is not installed at your system, you should
+% remove the first line of this file
+% \begin{code}
+%   |%\manfnttrue     ^^A remove this line if|\lttdots\hss
+% \end{code}
+%
+% This file is documented using \package{doc}. This means that documentation
+% and commented packagecode is contained in the single file
+% |bbding.dtx|. If you want to see the full documentation, you should remove
+% the second line of the file |bbding.dtx|
+% \begin{code}
+%   |%\UsersGuidetrue ^^A remove this line|\lttdots
+% \end{code}
+% and then run \LaTeX\ on the changed file. After this you should generate 
+% the change history using |makeindex|:
+% \begin{code}
+%   |makeindex -s gglo.ist -o bbding.gls bbding.glo|\hss
+% \end{code}
+% After this process the file once more.
+%
+% \medskip
+% \parmark[\copyright]^^A
+% At last the borrowing formal stuff: You a encouraged to copy, use, delete
+% etc.\ the package (|bbding.dtx|, |dingbat.fd| and |semantic.ins|) as much as
+% your heart desires as long as you pass it on in complete.
+% You are welcome to sneak in the code and get inspiration.  You should just
+% remember: {\small \copyright 1993 Karel Horak for the \METAFONT-source and 
+% \copyright 1995--1996 Peter Møller Neergaard for the style file}
+%
+% \StopEventually{
+%  \ifmulticols
+%    \addtocontents{toc}{\protect\end{multicols}}
+%  \fi
+% }
+%
+% \section{The Code of \texttt{bbding.dtx}}
+%
+% \ifmulticols
+%   \begin{multicols}{2}[\subsection{To e Done (In Priority)}]
+% \else
+%   \subsection{To Be Done (Priority)}
+% \fi
+%  
+% \begin{columnItemize}
+% \item Add check for the existence of |manfnt.tfm| instead of using the
+%   flag |\ifmanfnt|. |\checkfont| in |ltxcheck.tex| should be the right
+%   place to get the inspiration (thanks to \emph{David Carlisle}).
+
+% \end{columnItemize}
+% 
+% \ifmulticols
+%   \end{multicols}
+% \fi
+% 
+% \subsection{Overview of the Code}
+% \changes{1.0}{1996/02/02}{Finished the naming and documentation}
+% \changes{1.01}{1999/04/15}{Fixed a bug in the \METAFONT\ source for scissors}
+%
+% The code consits of five parts: 
+% 
+% \begin{itemize} 
+% \item A hack making it possible to process the rest of the file without
+%   the package yet installed.
+% \item The package header for |bbding.sty|.
+% \item The font definitions, which will be put in |Uding.fd| by
+%   \package{docstrip} and which alse should be used, when printing the
+%   documentation.  
+% \item The name definitions, which primarily is intended for
+%   |bbding.sty|. It is also used in the documentation, thereby making the
+%   processing of the documentaion possible without the documentation
+%   installed.
+% \item The driver program for preparing the documentation.
+% \end{itemize}
+%
+% \subsection{Stub for Users Guide and Documentation}
+%
+% First comes a little hack, that makes \LaTeX\ thinks it is loading the
+% package \texttt{bbding.sty}.  In this way the commands in the
+% package can be used---without warnings---when printing the documentation.
+%    \begin{macrocode}
+%<*documentation>
+   \makeatletter \def\@currname{bbding}
+\def\@currext{sty} 
+%</documentation>
+%    \end{macrocode}
+% |\@currname| and |\@currext| is internal \LaTeX-macros containg the name
+% respectively extension of the package currently being loaded.  The code is
+% encapsulated in |<*documentation>|\lttdots|</documentation>| so that it is
+% not included in the style-file, when installing the package.
+%
+% \subsection{Header of \texttt{bbding.sty}}
+%
+% First in |bbding.sty| comes the code that identifies the file as a
+% \LaTeXe-package
+%    \begin{macrocode}
+%<*sty>
+\NeedsTeXFormat{LaTeX2e}
+\ProvidesPackage{bbding}%
+  [1999/04/15 v1.01 Dingbats symbols%
+  ]
+%</sty>
+%    \end{macrocode}
+%
+% \subsection{Defining the Fonts for Use}
+% 
+% Before using the fonts the declaration of the font family should be done.
+% This is (by convention) kept in  |Uding.fd|, which starts by introducing
+% itself to \LaTeX.  Then the family |ding| is declared and defined in
+% one shape (medium (|n|) weight and width) and it is told that all sizes
+% comes from scaling the 10pt font.
+% 
+%    \begin{macrocode}
+%<*fd>
+\ProvidesFile{Uding.fd}
+  [1996/02/01 v1.0 BBding font definitions%
+  ]
+\DeclareFontFamily{U}{ding}{}
+\DeclareFontShape{U}{ding}{m}{n}{%
+  <-> bbding10 }{}
+%</fd>
+%    \end{macrocode}
+%
+% |Uding.fd| is not loaded until the font is actually used, which is
+% the first time that the command |\dingfamily| is used. This command is
+% defined in the packagefile:
+%
+%    \begin{macrocode}
+%<*sty>
+\newcommand{\dingfamily}{\fontencoding{U}\fontfamily{ding}\selectfont}
+%    \end{macrocode}
+%
+% \subsection{Definition of Each Symbol}
+%
+% \begin{macro}{\@chooseSymbol}
+%   It would unnormal to use more than one symbol at a time, so I
+%   define a macro for chosing one symbol in the font. This macro is 
+%   called by each of symbolsmacros. This keeps the definitions of the
+%   names simple and probably saves memory. I see no reason to define a
+%   ``|\textding|'' command as symbols would be used only one (or perhaps
+%   two) at a time.  
+%    \begin{macrocode}
+\newcommand{\@chooseSymbol}[1]{{\dingfamily\symbol{#1}}}
+%    \end{macrocode}
+%   This macro does the fontchange locally by encapsulating it in a group and
+%   then sets the symbol with the desired number.
+% \end{macro}
+% 
+% Then comes the definition of for each symbol:
+% As mentioned in the abstract the naming convention is inspired by the 
+% names used in \package{Wordperfect 6.0} font set 5. I have however
+% shortened the 
+% names. I have made a sligtly difference from the \LaTeX\ convention 
+% by capitalizing the first letter of each word, which seems more 
+% readable to me.
+%    \begin{macrocode}
+\newcommand{\ScissorRightBrokenBottom}{\@chooseSymbol{'000}}
+\newcommand{\ScissorRight}{\@chooseSymbol{'001}}
+\newcommand{\ScissorRightBrokenTop}{\@chooseSymbol{'002}}
+\newcommand{\ScissorLeftBrokenBottom}{\@chooseSymbol{'003}}
+\newcommand{\ScissorLeft}{\@chooseSymbol{'004}}
+\newcommand{\ScissorLeftBrokenTop}{\@chooseSymbol{'005}}
+\newcommand{\ScissorHollowRight}{\@chooseSymbol{'006}}
+\newcommand{\ScissorHollowLeft}{\@chooseSymbol{'007}}
+\newcommand{\Phone}{\@chooseSymbol{'010}}
+\newcommand{\PhoneHandset}{\@chooseSymbol{'011}}
+\newcommand{\Tape}{\@chooseSymbol{'012}}
+\newcommand{\Plane}{\@chooseSymbol{'013}}
+\newcommand{\Envelope}{\@chooseSymbol{'014}}
+\newcommand{\HandCuffRight}{\@chooseSymbol{'015}}
+\newcommand{\HandCuffLeft}{\@chooseSymbol{'016}}
+\newcommand{\HandCuffRightUp}{\@chooseSymbol{'017}}
+\newcommand{\HandCuffLeftUp}{\@chooseSymbol{'020}}
+\newcommand{\HandRight}{\@chooseSymbol{'021}}
+\newcommand{\HandLeft}{\@chooseSymbol{'022}}
+\newcommand{\HandRightUp}{\@chooseSymbol{'023}}
+\newcommand{\HandLeftUp}{\@chooseSymbol{'024}}
+\newcommand{\Peace}{\@chooseSymbol{'025}}
+\newcommand{\HandPencilLeft}{\@chooseSymbol{'026}}
+\newcommand{\PencilRight}{\@chooseSymbol{'027}}
+\newcommand{\PencilLeft}{\@chooseSymbol{'030}}
+\newcommand{\PencilRightUp}{\@chooseSymbol{'031}}
+\newcommand{\PencilLeftUp}{\@chooseSymbol{'032}}
+\newcommand{\PencilRightDown}{\@chooseSymbol{'033}}
+\newcommand{\PencilLeftDown}{\@chooseSymbol{'034}}
+\newcommand{\NibRight}{\@chooseSymbol{'035}}
+\newcommand{\NibLeft}{\@chooseSymbol{'036}}
+\newcommand{\NibSolidRight}{\@chooseSymbol{'037}}
+\newcommand{\NibSolidLeft}{\@chooseSymbol{'040}}
+\newcommand{\Checkmark}{\@chooseSymbol{'041}}
+\newcommand{\CheckmarkBold}{\@chooseSymbol{'042}}
+\newcommand{\XSolid}{\@chooseSymbol{'043}}
+\newcommand{\XSolidBold}{\@chooseSymbol{'044}}
+\newcommand{\XSolidBrush}{\@chooseSymbol{'045}}
+\newcommand{\PlusOutline}{\@chooseSymbol{'046}}
+\newcommand{\Plus}{\@chooseSymbol{'047}}
+\newcommand{\PlusCenterOpen}{\@chooseSymbol{'050}}
+\newcommand{\PlusThinCenterOpen}{\@chooseSymbol{'051}}
+\newcommand{\Cross}{\@chooseSymbol{'052}}
+\newcommand{\CrossOpenShadow}{\@chooseSymbol{'053}}
+\newcommand{\CrossOutline}{\@chooseSymbol{'054}}
+\newcommand{\CrossBoldOutline}{\@chooseSymbol{'055}}
+\newcommand{\CrossMaltese}{\@chooseSymbol{'056}}
+\newcommand{\DavidStarSolid}{\@chooseSymbol{'057}}
+\newcommand{\DavidStar}{\@chooseSymbol{'060}}
+\newcommand{\FourAsterisk}{\@chooseSymbol{'061}}
+\newcommand{\JackStar}{\@chooseSymbol{'062}}
+\newcommand{\JackStarBold}{\@chooseSymbol{'063}}
+\newcommand{\CrossClowerTips}{\@chooseSymbol{'064}}
+\newcommand{\FourStar}{\@chooseSymbol{'065}}
+\newcommand{\FourStarOpen}{\@chooseSymbol{'066}}
+\newcommand{\FiveStarLines}{\@chooseSymbol{'067}}
+\newcommand{\FiveStar}{\@chooseSymbol{'070}}
+\newcommand{\FiveStarOpen}{\@chooseSymbol{'071}}
+\newcommand{\FiveStarOpenCircled}{\@chooseSymbol{'072}}
+\newcommand{\FiveStarCenterOpen}{\@chooseSymbol{'073}}
+\newcommand{\FiveStarOpenDotted}{\@chooseSymbol{'074}}
+\newcommand{\FiveStarOutline}{\@chooseSymbol{'075}}
+\newcommand{\FiveStarOutlineHeavy}{\@chooseSymbol{'076}}
+\newcommand{\FiveStarConvex}{\@chooseSymbol{'077}}
+\newcommand{\FiveStarShadow}{\@chooseSymbol{'100}}
+\newcommand{\AsteriskBold}{\@chooseSymbol{'101}}
+\newcommand{\AsteriskCenterOpen}{\@chooseSymbol{'102}}
+\newcommand{\AsteriskThin}{\@chooseSymbol{'103}}
+\newcommand{\AsteriskThinCenterOpen}{\@chooseSymbol{'104}}
+\newcommand{\EightStarTaper}{\@chooseSymbol{'105}}
+\newcommand{\EightStarConvex}{\@chooseSymbol{'106}}
+\newcommand{\SixStar}{\@chooseSymbol{'107}}
+\newcommand{\EightStar}{\@chooseSymbol{'110}}
+\newcommand{\EightStarBold}{\@chooseSymbol{'111}}
+\newcommand{\TwelweStar}{\@chooseSymbol{'112}}
+\newcommand{\SixteenStarLight}{\@chooseSymbol{'113}}
+\newcommand{\SixFlowerPetalRemoved}{\@chooseSymbol{'114}}
+\newcommand{\SixFlowerOpenCenter}{\@chooseSymbol{'115}}
+\newcommand{\Asterisk}{\@chooseSymbol{'116}}
+\newcommand{\SixFlowerAlternate}{\@chooseSymbol{'117}}
+\newcommand{\FiveFlowerPetal}{\@chooseSymbol{'120}}
+\newcommand{\SixFlowerPetalDotted}{\@chooseSymbol{'121}}
+\newcommand{\FiveFlowerOpen}{\@chooseSymbol{'122}}
+\newcommand{\EightFlowerPetal}{\@chooseSymbol{'123}}
+\newcommand{\SunshineOpenCircled}{\@chooseSymbol{'124}}
+\newcommand{\SixFlowerAltPetal}{\@chooseSymbol{'125}}
+\newcommand{\FourClowerOpen}{\@chooseSymbol{'126}}
+\newcommand{\FourClowerSolid}{\@chooseSymbol{'127}}
+\newcommand{\AsteriskRoundedEnds}{\@chooseSymbol{'130}}
+\newcommand{\EightFlowerPetalRemoved}{\@chooseSymbol{'131}}
+\newcommand{\EightAsterisk}{\@chooseSymbol{'132}}
+\newcommand{\SixFlowerRemovedOpenPetal}{\@chooseSymbol{'133}}
+\newcommand{\SparkleBold}{\@chooseSymbol{'134}}
+\newcommand{\Sparkle}{\@chooseSymbol{'135}}
+\newcommand{\SnowflakeChevron}{\@chooseSymbol{'136}}
+\newcommand{\SnowflakeChevronBold}{\@chooseSymbol{'137}}
+\newcommand{\Snowflake}{\@chooseSymbol{'140}}
+\newcommand{\CircleSolid}{\@chooseSymbol{'141}}
+\newcommand{\Ellipse}{\@chooseSymbol{'142}}
+\newcommand{\EllipseSolid}{\@chooseSymbol{'143}}
+\newcommand{\CircleShadow}{\@chooseSymbol{'144}}
+\newcommand{\EllipseShadow}{\@chooseSymbol{'145}}
+\newcommand{\Square}{\@chooseSymbol{'146}}
+\newcommand{\SquareSolid}{\@chooseSymbol{'147}}
+\newcommand{\SquareShadowBottomRight}{\@chooseSymbol{'150}}
+\newcommand{\SquareShadowTopRight}{\@chooseSymbol{'151}}
+\newcommand{\SquareShadowTopLeft}{\@chooseSymbol{'152}}
+\newcommand{\SquareCastShadowBottomRight}{\@chooseSymbol{'153}}
+\newcommand{\SquareCastShadowTopRight}{\@chooseSymbol{'154}}
+\newcommand{\SquareCastShadowTopLeft}{\@chooseSymbol{'155}}
+\newcommand{\TriangleUp}{\@chooseSymbol{'156}}
+\newcommand{\TriangleDown}{\@chooseSymbol{'157}}
+\newcommand{\DiamondSolid}{\@chooseSymbol{'160}}
+\newcommand{\OrnamentDiamondSolid}{\@chooseSymbol{'161}}
+\newcommand{\HalfCircleRight}{\@chooseSymbol{'162}}
+\newcommand{\HalfCircleLeft}{\@chooseSymbol{'163}}
+\newcommand{\RectangleThin}{\@chooseSymbol{'164}}
+\newcommand{\Rectangle}{\@chooseSymbol{'165}}
+\newcommand{\RectangleBold}{\@chooseSymbol{'166}}
+\newcommand{\ArrowBoldRightStrobe}{\@chooseSymbol{'167}}
+\newcommand{\ArrowBoldUpRight}{\@chooseSymbol{'170}}
+\newcommand{\ArrowBoldDownRight}{\@chooseSymbol{'171}}
+\newcommand{\ArrowBoldRightShort}{\@chooseSymbol{'172}}
+\newcommand{\ArrowBoldRightCircled}{\@chooseSymbol{'173}}
+%</sty>
+%    \end{macrocode}
+% When naming I have tried to keep a maxium of four words per name. I have
+% however made a few exception to have a consistent naming.
+%
+% \subsection{Driver for the Documentation}
+%
+% The package-file (|bbding.dtx|) is ended by the \LaTeX-preamble to produce
+% the documentation.  By placing it at the end, all the commands in the
+% package can be used when processing the documentation, though the
+% package is not yet installed on the system. The fontmetrices and -bitmaps
+% should however be generated before.
+%    \begin{macrocode}
+%<*documentation>
+\documentclass{ltxdoc} 
+\usepackage[T1]{fontenc}
+
+\newif\ifmulticols
+  \IfFileExists{multicol.sty}{\multicolstrue}{}
+
+\newif\ifmanfnt 
+\newif\ifUsersGuide
+
+\newcommand{\lttdots}{\ensuremath{\mathtt{\ldots}}}
+\newcommand{\CSname}[1]{\texttt{\protect\bslash#1}}
+\newcommand{\package}[1]{\textsf{#1}}
+\newcommand{\bbding}{\texttt{bbding}}
+
+\DeclareFontFamily{U}{manual}{} 
+\DeclareFontShape{U}{manual}{m}{n}{<->  manfnt }{} 
+\newcommand{\METAFONT}{%
+  \ifmanfnt 
+    {\fontencoding{U}\fontfamily{manual}\selectfont
+     \symbol{47}\symbol{48}\symbol{49}\symbol{50}\-%
+     \symbol{51}\symbol{52}\symbol{53}\symbol{49}}%
+  \else METAFONT\fi}
+
+
+\def\GetInfo#1{%
+  \def\filename{#1}%
+  {\def\ver##1(##2)##3\relax{%
+     \def\tc{##1}%
+     \def\td{##2}%
+     \ifx \td\empty %
+     \else %
+      \edef\td{$\csname ##2\endcsname$}%
+     \fi}%
+   \def\tb##1 v##2 ##3\end{%
+   \gdef\filedate{##1}%
+     \ver ##2()\relax%
+     \xdef\fileversion{\tc\expandafter\noexpand\td}%
+    \gdef\fileinfo{##3}}%
+  \edef\ta{\csname ver@#1\endcsname}%
+  \expandafter\tb\ta\end\relax}}
+
+\def\setn@me#1#2{$\backslash$#2}
+{\catcode`\^^M=12%
+ \gdef\st@rtenv{\@ifnextchar^^M{\dropnext\setCommand}{\setCommand}}%
+ \gdef\setCommand#1#2^^M{%
+   \hbox to 1cm{#1}\hbox{\expandafter\setn@me\string#1} %
+ \@ifnextchar\end{}{\setCommand}%
+}}
+
+
+\newtoks\p@rm@rk 
+\newcommand{\setparagraphmark}[1]{\p@rm@rk={#1}}
+\newcommand{\parmark}[1][\the\p@rm@rk]{%
+  \setbox0=\hbox{\huge #1}%
+  \clubpenalty=10000%
+  \noindent\hangindent=\wd0 \hangafter=-2%
+  \llap{\raise.35em\hbox{\vbox to0pt{\box0 \vss}\hfill}}}
+
+\newenvironment{code}{\begin{verse}\small}{\end{verse}}
+\newenvironment{columnItemize}%
+  {\begin{list}%
+    {$\bullet$}%
+    {\settowidth{\labelwidth}{$\bullet$}%
+     \setlength{\leftmargin}{5mm}%
+     \setlength{\labelsep}{\leftmargin}%
+     \addtolength{\labelsep}{-\labelwidth}}}%
+  {\end{list}}
+
+\newcount\c@lumnsleft
+\newcount\t@talcolumns
+\newdimen\c@lumnwidth
+\newenvironment{commandsInColumns}[1]{%
+  \t@talcolumns=#1\advance\t@talcolumns-1\c@lumnsleft=\t@talcolumns%
+  \c@lumnwidth=-2em\multiply\c@lumnwidth by \t@talcolumns%
+  \advance\c@lumnwidth by\hsize \divide\c@lumnwidth by #1%
+  \vskip\z@     % Ensures vertical mode
+  \catcode`\^^M=12%
+  \hbox\bgroup%
+  \st@rtenv%
+}
+{\ifnum\c@lumnsleft=\t@talcolumns \egroup
+ \else \egroup \fi}
+
+{\catcode`\^^M=12%
+ \gdef\st@rtenv{\@ifnextchar^^M{\dr@pnext\doNextComm@nd}{\doNextComm@nd}}%
+ \gdef\setComm@nd#1#2^^M{%
+   \hbox to \c@lumnwidth%
+     {\hbox to .5cm{#1\hss}\hbox{\expandafter\setn@me\string#1.}\hss}%
+   \advance\c@lumnsleft-1%
+   \ifnum\c@lumnsleft>0%
+     \hskip2em%
+   \else%
+     \egroup%
+     \hbox\bgroup%
+     \c@lumnsleft\t@talcolumns%
+   \fi%
+   \doNextComm@nd%
+  }}
+\def\dr@pnext#1#2{#1}
+\def\doNextComm@nd{\@ifnextchar\end{}{\setComm@nd}}%
+\def\setn@me#1#2.{\CSname{#2}}
+  % Removes the first character (^^M) of the name generated by string
+
+{\catcode`\%=11
+\typeout{}
+\typeout{NOTE: If LaTeX complains}
+\typeout{\@spaces\@spaces Font U/manual/m/n/9 manfnt at 9.0 not loadable: ...}
+\typeout{\@spaces\space\space then remove the very first line of this file}
+\typeout{\@spaces\@spaces %\protect\manfnttrue\space ...}
+\typeout{}
+}
+
+\makeatother
+
+\begin{document} 
+   \DocInput{bbding.dtx}
+\end{document}
+%</documentation>
+%    \end{macrocode}
+% The documentpreamble loads \package{ltxdoc}, which is the standard
+% \LaTeXe-class for documentation and issues commands about
+% charactertables. Then it defines a bunch of commands (described below),
+% that had eased my typing of the documentation. 
+% It issues some ``relaxing'' typeouts to the user, and at last it is ready
+% to really process the documenation, which is done by
+% loading itself once more using  \package{docstrip}.
+%
+% The commands defined are
+% \begin{description}
+% \item[\CSname{ifmulticols}] conditional ensuring that \TeX\ branches over
+%   parts setting up multiple columns, when this is not provided.
+% \item[\CSname{ifmanfnt}] conditional telling whether the manualfont used
+%   for the \emph{The \TeX-book} is available. The font is used to generate
+%   the \METAFONT-logo and it is declared to NFSS anyway, as it will only be
+%   loaded up on request. The user will have to manually set this conditional to
+%   false to avoid using the |manfnt|, which is done by removing the first
+%   line. I thought it safer to ask the user to remove something written,
+%   than adding something ``unwritten''.%  
+% \item[\CSname{ifUsersGuide}] conditional telling wether only the users
+%   guide is wanted. As with |\ifmanfnt| the user will have to remove the
+%   first line of the file to get the full documentation.
+% \item[\CSname{lttdots}] gives ellipsis in a typewriter-font
+% \item[\CSname{CSname}] typeset a commandname when it is not possible using 
+%   the standard notation, \verb+|+\lttdots\verb+|+, from \package{ltxdoc} (eg.\ in
+%   headers). Intentionally given a name close to \TeX's |\csname|.
+% \item[\CSname{package}] sets the name of \LaTeX-package.
+% \item[\CSname{bbding}] gives the package-symbol (name in a typewriter-font)
+% \item[\CSname{GetInfo}] defines the commands |\fileversion|, |\filedate|
+%   and |\fileinfo| with information about \bbding\
+%   as provided in
+%   |\providespackage|. It is mainly borrowed from a command with the same
+%   name in \package{ltxdoc} but has been changed to type the additional
+%   greek letter in the package version provided in parenthesis.
+% \item[\CSname{parmark} and \CSname{setparagraphmark}] is used to set a
+% given symbol in front of a paragraph. |\setparagraphmark| defines the
+% symbol to be used by |\parmark|, if no argument is given explicit.
+% \item[\texttt{code}] Environment for displaying examples in the Users Guide.
+% \item[\texttt{columnitemize}] Makes an itemizing where the bullet is not
+%   idented, which would make the text too narrow when using columns.
+% \item[\texttt{commandsInColumns}] Is as specialized environment---nearly
+%   deserving its own package. I owe a special thanks to \emph{Mauro
+%   Orlandini} and \emph{Max Hailperin} for developing a much-like
+%   environment, which gave me much inspiration. 
+%
+%   The environment is used to show the commands of \bbding\ in
+%   columns. Inside the environment each line contains a entry, which is set
+%   across the page in the number of columns given by the parameter. On each
+%   line the first token not being a space is taken as the command. It is
+%   first set and then its name is set in a \texttt{typewriter} font.
+% 
+%   \textbf{Some notes on the code}: First thing in the environment is to
+%   calculate the width of the columns, 
+%   \[
+%     \CSname{c@lumnwidth} = \frac{\textrm{textwidth} - (\textrm{no.\ of columns}-1)*\textrm{column skip}}{\textrm{no.\ of columns}}
+%   \]
+%   Then the counters are initialised and \TeX\ is forced into vertical
+%   mode. Each line is being build in a |\hbox|, which is first started in
+%   the \emph{beginning definition} of the environment. When the given
+%   number of columns have been set, the box is ended (and thereby
+%   added to the vertical list) and a new one is started.
+%
+%   |\setComm@nd| finds one line and sets in a |\hbox| with the calculated
+%   width. It is therefore declared in a group, where \emph{carriage return}
+%   (\verb+^^M+) is turned into a \emph{other} character. The actual setting is
+%   done by |\setn@me|, which matches out the relevant part produced by the
+%   primitive |\string|. After the command is set, it is tested if this line is
+%   done, ie.\ the correct number of columns have been set. In that case
+%   it is ended as described above, otherwise \LaTeX\ skips to the
+%   next column. At last |\doNextComm@nd| testes if there is a new command
+%   or it has reaced the |\end| of the environment.
+% \end{description}
+%
+% \Finale \sloppy \PrintChanges
+\endinput
+
+
+
+
+
+
+
+
+
+