path: root/Master/tlpkg/tlgs/Resource/Init/pdf_ops.ps

% Copyright (C) 2001-2012 Artifex Software, Inc.
% All Rights Reserved.
%
% This software is provided AS-IS with no warranty, either express or
% implied.
%
% This software is distributed under license and may not be copied,
% modified or distributed except as expressly authorized under the terms
% of the license contained in the file LICENSE in this distribution.
%
% Refer to licensing information at http://www.artifex.com or contact
% Artifex Software, Inc.,  7 Mt. Lassen Drive - Suite A-134, San Rafael,
% CA  94903, U.S.A., +1(415)492-9861, for further information.
%

% Definitions for most of the PDF operators.

.currentglobal //true .setglobal

% Define pdfmark.  Don't allow it to be bound in.
% Also don't define it in systemdict, because this leads some Adobe code
% to think this interpreter is a distiller.
% (If this interpreter really is a distiller, don't do this.)
systemdict /pdfmark known not
 { userdict /pdfmark { cleartomark } bind put } if

userdict /GS_PDF_ProcSet 256 dict dup begin

% ---------------- Abbreviations ---------------- %

/bdef { bind def } bind def

% ---------------- Graphics state stack ---------------- %

% PDF adds a number of parameters to the graphics state.
% We implement this by pushing and popping a dictionary
% each time we do a PDF gsave or grestore.
% The keys in this dictionary are as follows:
%	self			% identifies the dictionary as one of ours
%	ClipRect		% (optional)
%	Show
%	TextSaveMatrix		% matrix at time of BT (iff within BT/ET)
% (The following correspond directly to PDF state parameters.)
%	AlphaIsShape
%	FillConstantAlpha
%	FillColor
%	FillColorSpace
%	FillOverprint
%	SoftMask
%	StrokeConstantAlpha
%	StrokeColor
%	StrokeColorSpace
%	StrokeOverprint
%	TextSpacing
%	TextHScaling
%	Leading
%	TextFont
%	TextLineMatrix
%	TextMatrix
%	TextRise
%	TextRenderingMode
%	WordSpacing
% (The following is cached information derived from other graphics state params)
%	FontMatrixNonHV % TextFont.FontMatrix alters horz/vert glyph advance vector direction

/nodict 1 dict def
nodict /self { //nodict } executeonly put % to avoid recursion in dumps
nodict readonly pop

/dictbeginpage {	% <initialdict> dictbeginpage -
  20 dict copy dup begin
  1 packedarray cvx executeonly /self exch def
  graphicsbeginpage textbeginpage
} bdef
/endpage {	% - endpage -
  showpage end
} bdef

/graphicsbeginpage {
  initgraphics
  //true .setaccuratecurves
  currentdict /ClipRect knownoget { aload pop rectclip } if
  0 g  0 G //false op //false OP  0 OPM
  1 ca  1 CA //null SMask //false AIS  /Compatible BM //true TK
} bdef

% We must allow /Show to be set, otherwise a text operation can
% end up in infinite recursion with showfirst calling Show, and
% Show calling showfirst.
/gput_always_allow
1 dict dup begin
  /Show 0 def
end def

/gput		% <value> <key> gput -
 {
   dup //gput_always_allow exch known not currentdict /n known and {
     pop pop
     (   **** Error: Ignoring changes to the graphic state after operator 'W'.\n) pdfformaterror
     (               Output may be incorrect.\n) pdfformaterror
   } {
     exch currentdict //nodict eq { /self dup load end 5 dict begin def } if
     def
   } ifelse
 } bdef
currentdict /gput_always_allow .undef

/q {
  %% Special case, if we get a 'q' while accumulating clip/eoclip then
  %% we need to make sure we close the current dictionary, and reopen it after
  %% performing the gsave, so that the redefinition of 'n' in particular is correct
  currentdict /n known {
    currentdict            %% copy the dicitonary for the accumulation
    end                    %% and close it (NB *before* the gsave!)
    gsave //nodict begin   %% execute gsave and start 'nodict' just like normal
    begin                  %% reopen the accumulation dictionary.
                           %% when we execute 'n' this will close and we'll go back
                           %% to the regular 'nodict' opened above. This could cause some
                           %% odd interactions with 'Q' for unbalanced files.....
  } {
    %% ugly hackery to work around badly broken PDF file in Bug #695897. The file has nested BT/ET
    %% sections, and delimits them with q/Q. The problem is that our code to deal with nested
    %% text sections looks in the current dictionary for TextSaveMatrix, and a 'q' makes a brand
    %% new empty dictionary, so it defeats it.
    %% I tried copying the TextSaveMatrix from the parent state into this one, but that then causes
    %% other problems because we end up apllying the TextSaveMatrix when we shouold not. Attempting
    %% to clear the TextSaveMatrix from all saved states on ET then caused it not to be defined at
    %% times when we needed it.....
    %% This is all terribly flaky, but defining a new matrix inside gsaves that tells us that we had
    %% were already in a text block allows us to detect and cope with the nested BT's and leaving the
    %% original TextSaveMatrix behind allows the matching ET not to throw an error, as well as coping
    %% with the various other problems listed above. Its not pretty though.
    currentdict /TextSaveMatrix known {
      currentdict /TextSaveMatrix get matrix copy
      gsave //nodict begin
      /qTextSaveMatrix gput
    }{
      gsave //nodict begin
    }ifelse
  } ifelse
  PDFusingtransparency { .pushextendedgstate } if
} bdef

% Some PDF files have excess Q operators!
/Q {
  //false
  { currentdict /n known { end pop //true } { exit } ifelse
  } loop {
    (   **** Error: Encountered a 'Q' before finishing 'W' mode.\n)
    pdfformaterror
    (               Output may be incorrect..\n) pdfformaterror
  } if
  currentdict /self .knownget {
    exec //nodict eq {
      end
      PDFusingtransparency { .popextendedgstate } if
      % Restore graphics state, but do not modify path. Paths are not part
      % of the PDF graphics state; see 4.4.1 of PDF reference 3rd ed.
      % Collecting the path with one ctm and re-playing it with another ctm
      % transforms the path exactly as PDF needs.
      {.getpath} stopped {
      (   **** Error: unable to preserve current path, probable degenerate CTM, output may be incorrect.\n) pdfformaterror
      grestore newpath
      }{
      grestore newpath { exec } forall
      } ifelse
      //false
    } {
      //true
    } ifelse
  } {
    //true	% formaterror -- not a gsave dict
  } ifelse
  {
    (\n   **** Error: File has unbalanced q/Q operators \(too many Q's\)\n               Output may be incorrect.\n)

    pdfdict /.Qqwarning_issued .knownget
    {
      {
        pop
      }
      {
        currentglobal pdfdict gcheck .setglobal
        pdfdict /.Qqwarning_issued //true .forceput
        .setglobal
        pdfformaterror
      } ifelse
    }
    {
      currentglobal pdfdict gcheck .setglobal
      pdfdict /.Qqwarning_issued //true .forceput
      .setglobal
      pdfformaterror
    } ifelse
  } if
} bdef

% Save PDF gstate
/qstate {       % - qstate <qstate>
  gstate
} bdef

% Set PDF gstate
/setqstate {    % <qstate> setqstate -
  { matrix setmatrix //false upath } stopped {
    pop setgstate newpath
  } {
    % Save the CTM, set identity during the uappend, then set the CTM
    exch setgstate matrix currentmatrix matrix setmatrix
    exch newpath uappend setmatrix
  } ifelse
} bdef

% ---------------- Color setting ---------------- %

/nullpatternproc { pop } bdef
/nullpattern mark
   /PatternType 1 /PaintType 1 /TilingType 3 /BBox [0 0 1 1]
   /XStep 1 /YStep 1 /PaintProc //nullpatternproc
.dicttomark readonly def

/PDFsetpattern {
     % Since multiple patterns may share
     % same data stream, we need to ensure
     % that the stream is at 0 position.
     % Making this consistently with resolveshading,
     % which applies ReusableStreamDecode filter
     % to the PS stream, which represents the
     % PDF stream in dynamics.

     dup /Shading knownoget {
       dup /ShadingType oget 4 ge {
         /DataSource knownoget {
           dup type /filetype eq {
             0 setfileposition
           } {
             pop
           } ifelse
         } if
       } {
        pop
       } ifelse
     } if

     % Associate pattern instance with the default qstate for the context.
     % A single pattren object can be reused in several contexts.
     dup DefaultQstate .knownget {
       exch pop
     } {
       % But don't update read-only initial null pattern.
       dup /PaintProc .knownget { //nullpatternproc ne } { //true } ifelse {
         dup dup /Matrix knownoget not { { 1 0 0 1 0 0 } } if

         gsave
         .currentfillconstantalpha
         .currentstrokeconstantalpha
         DefaultQstate setqstate
         .setstrokeconstantalpha
         .setfillconstantalpha
         makepattern
         grestore

         dup 3 1 roll
         DefaultQstate exch put
       } if
     } ifelse
} bdef

/CSdict mark
  /DeviceGray { 0 } bind
  /DeviceRGB { [0 0 0] cvx } bind
  /DeviceCMYK { [0 0 0 1] cvx } bind
  /CIEBasedA { 0 } bind
  /CIEBasedABC { [0 0 0] cvx } bind
  /CalGray { pop /DeviceGray 0 } bind
  /CalRGB { pop /DeviceRGB [0 0 0] cvx } bind
  /Lab {[0 0 0] cvx } bind
  /ICCBased { [ 1 index 1 oget /N get { 0 } repeat ] cvx } bind
  /Separation { 1 } bind
  /DeviceN {	% What is the correct value??
    [ 1 index 1 get length { 1 } repeat ] cvx
  } bind
  /Indexed { 0 } bind
  /Pattern { //nullpattern matrix makepattern } bind
.dicttomark readonly def

/ri {//.renderingintentdict exch .knownget { .setrenderingintent } if } bdef
/g  {/DeviceGray .setfillcolorspace .setfillcolor } bdef
/G  {/DeviceGray .setstrokecolorspace .setstrokecolor} bdef
/rg {/DeviceRGB .setfillcolorspace .setfillcolor} bdef
/RG {/DeviceRGB .setstrokecolorspace .setstrokecolor} bdef
/k  {/DeviceCMYK .setfillcolorspace .setfillcolor} bdef
/K  {/DeviceCMYK .setstrokecolorspace .setstrokecolor} bdef
/cs {dup dup type /nametype ne { 0 get } if //CSdict exch get exec exch .setfillcolorspace exec .setfillcolor} bdef
/CS {dup dup type /nametype ne { 0 get } if //CSdict exch get exec exch .setstrokecolorspace exec .setstrokecolor} bdef
/sc {.setfillcolor} bdef
/SC {.setstrokecolor} bdef
/sc* {.setfillcolor} bdef
/SC* {.setstrokecolor} bdef
/sc*_and_set {
  dup type /dicttype eq
  {
    dup /Type known
    {
      dup /Type get /Pattern eq {PDFsetpattern} if
    }
    {
      dup /PatternType known {PDFsetpattern} if
    } ifelse
  } if
  .setfillcolor
} bdef
/SC*_and_set {
  dup type /dicttype eq
  {
    dup /Type known
    {
      dup /Type get /Pattern eq {PDFsetpattern} if
    }
    {
      dup /PatternType known {PDFsetpattern} if
    } ifelse
  } if
  .setstrokecolor
} bdef
/sc1 {.setfillcolor} bdef
/SC1 {.setstrokecolor} bdef
/sc1_and_set {
  dup type /dicttype eq
  {
    dup /Type known
    {
      dup /Type get /Pattern eq {PDFsetpattern} if
    }
    {
      dup /PatternType known {PDFsetpattern} if
    } ifelse
  } if
  .setfillcolor
} bdef
/SC1_and_set {
  dup type /dicttype eq
  {
    dup /Type known
    {
      dup /Type get /Pattern eq {PDFsetpattern} if
    }
    {
      dup /PatternType known {PDFsetpattern} if
    } ifelse
  } if
  .setstrokecolor
} bdef
/csput {dup dup type /nametype ne { 0 get } if //CSdict exch get exec exch 2 copy .setfillcolorspace exec .setfillcolor .setstrokecolorspace exec .setstrokecolor} bdef
/csset {dup dup type /nametype ne { 0 get } if //CSdict exch get exec exch} bdef

% ---------------- Color setting ---------------- %


% ---------------- Overprint/transparency setting ---------------- %

/op { .setfilloverprint
} bdef	% NB pdf_draw:gsparamdict handled /OP with no /op
/OP { .setstrokeoverprint
} bdef
/OPM {
  /.setoverprintmode where { pop dup .setoverprintmode .swapcolors .setoverprintmode .swapcolors } { pop } ifelse
} bdef
/ca { .setfillconstantalpha } bdef
/CA { .setstrokeconstantalpha } bdef
/SMask {
  dup type /booleantype eq {
    .currentSMask type /dicttype eq {
      .currentSMask /Processed 2 index .forceput
    } {
      .setSMask
  }ifelse
  }{
  .setSMask
  }ifelse

  %% This is some craziness to do with annotations and graphics states
  %% the original nodict can't be written to, and we haven't (I think) done
  %% a gsave, so we haven't copied it to /self, if we don't do that here
  %% then transparent annotations cause an invalid access error.
  currentdict //nodict eq {/self dup load end 5 dict begin def} if
} bdef
/AIS { .setalphaisshape } bdef
/BM {
  /.setblendmode where {
    pop [ exch dup type /nametype ne { aload pop } if /Normal ] {
      { .setblendmode } .internalstopped not { exit } if pop
    } forall
  } {
    pop
  } ifelse
} bdef
/TK {
  /.settextknockout where { pop .settextknockout } { pop } ifelse
} bdef

/UseBlackPtComp {
  %% Our implementation of black point compensation uses 0 or 1, not a boolean
  /.setblackptcomp where {pop false eq {0}{1}ifelse .setblackptcomp }{ pop } ifelse
} bdef

% ---------------- Color installation ---------------- %

% Establish a given color (and color space) as current.
/.settransparencyparams {	% <alpha> <smask> .settransparencyparams -
  PDFusingtransparency {
    /.begintransparencygroup where {
      pop .currentalphaisshape
      {
        1 .setopacityalpha  exch .setshapealpha 1
      } {
        1 .setshapealpha  exch .setopacityalpha 0
      } ifelse
        % Set the soft mask by rendering the XObject.  Doing this every time
        % is obviously very inefficient; we'll improve it later.
      .settransparencymask
    } {
      pop pop
    } ifelse
  } {
    pop pop
  } ifelse
} bdef
/.settransparencymask {		% <paramdict> <masknum> .settransparencymask -
  exch dup type /dicttype ne {
    PDFusingtransparency {
      pop pop
    } {
      dup /Draw get exec
    } ifelse
  } {
    dup /Processed .knownget {
      {
        pop pop
      } {
        dup /Draw get exec
      }ifelse
    }{
      dup /Draw get exec
    } ifelse
  } ifelse
} bdef
% (Non-mask) images must execute setfillblend.
/setfillblend {
  .currentfillconstantalpha
  .currentSMask .settransparencyparams
} def
/setfillstate {
  setfillblend
} def
/setstrokestate {
  .currentstrokeconstantalpha
  .currentSMask .settransparencyparams
} def
/Cdict 15 dict dup begin	% <color...> <colorspace> -proc- -
  /DeviceGray { pop setgray } bdef
  /DeviceRGB { pop setrgbcolor } bdef
  /DeviceCMYK { pop setcmykcolor } bdef
  /CIEBasedA { setgcolorspace setcolor } bdef
  /CIEBasedABC /CIEBasedA load def
  /CIEBasedDEF /CIEBasedA load def
  /CIEBasedDEFG /CIEBasedA load def
  /CalRGB /CIEBasedA load def
  /CalGray /CIEBasedA load def
  /Lab /CIEBasedA load def
  %% This section is to deal with the horrible pair of files in Bug #696690 and Bug #696120
  %% These files have ICCBased spaces where the value of /N and the number of components
  %% in the profile differ. In addition the profile in Bug #696690 is invalid. In the
  %% case of Bug #696690 the /N value is correct, and the profile is wrong, in the case
  %% of Bug #696120 the /N value is incorrect and the profile is correct.
  %% We 'suspect' that Acrobat uses the fact that Bug #696120 is a pure image to detect
  %% that the /N is incorrect, we can't be sure whether it uses the profile or just uses
  %% the /N to decide on a device space. What we now do is; If the /N and device profile
  %% number of components don't match, we assume the device profile is correct and patch
  %% /N to be the same as the profile (see /ICCBased-resolve), but we save the original
  %% value of /N in /OrigN. In setcolor, if the space is a genuine ICCBased space
  %% (not a replacement for a device profile) we call set_dev_color which will actually
  %% exercise the profile. If that fails we return an error. Here we run setcolor in a
  %% stopped context, and if it fails we check to see if there is a /OrigN (ths occurs
  %% only if the /N was different to the number of components in the profile). If there
  %% is a /OrigN then prefer that to the profile, otherwise they agreed, so just use
  %% /N and select a device space. If we can't select a device space with the correct
  %% number of components, give up and throw an error. See also /last-ditch-bpc-csp
  %% in pdf_draw.ps.
  /ICCBased {
    dup 1 get
    dup /OrigN .knownget {exch /N get}{/N get dup} ifelse
    3 add mark exch 2 roll
    setgcolorspace {setcolor} stopped
    {
      cleartomark
      [//null /DeviceGray //null /DeviceRGB /DeviceCMYK] exch
      {get} stopped
      {
        (   **** Error: Unable to set an ICCBased colour space, and cannot set an alternate from the number of components.\n) print
        /setcolorspace cvx /undefined signalerror
      }
      {
        dup //null eq {
          (   **** Error: Unable to set an ICCBased colour space, and cannot set an alternate from the number of components.\n) print
          /setcolorspace cvx /undefined signalerror
        }{
          ICCProfileNError flush not {
            (   **** Warning : Error setting an ICCBased colour space, using /N to set an alternate device space.\n) print
            (                  Output may be incorrect.\n) print
          } if
          setcolorspace
          /ICCProfileNError true def
        } ifelse
      }ifelse
    }{
      cleartomark pop
    }
    ifelse
  } bdef
  /Separation /CIEBasedA load def
  /DeviceN /CIEBasedA load def
  /Indexed /CIEBasedA load def
  /Pattern
   { setgcolorspace

     % Since multiple patterns may share
     % same data stream, we need to ensure
     % that the stream is at 0 position.
     % Making this consistently with resolveshading,
     % which applies ReusableStreamDecode filter
     % to the PS stream, which represents the
     % PDF stream in dynamics.

     dup /Shading knownoget {
       dup /ShadingType oget 4 ge {
         /DataSource knownoget {
           dup type /filetype eq {
             0 setfileposition
           } {
             pop
           } ifelse
         } if
       } {
        pop
       } ifelse
     } if

     % Associate pattern instance with the default qstate for the context.
     % A single pattren object can be reused in several contexts.
     dup DefaultQstate .knownget {
       exch pop
     } {
       % But don't update read-only initial null pattern.
       dup /PaintProc .knownget { //nullpatternproc ne } { //true } ifelse {
         dup dup /Matrix knownoget not { { 1 0 0 1 0 0 } } if

         gsave
         .currentfillconstantalpha
         .currentstrokeconstantalpha
         DefaultQstate setqstate
         .setstrokeconstantalpha
         .setfillconstantalpha
         makepattern
         grestore

         dup 3 1 roll
         DefaultQstate exch put
       } if
     } ifelse
     setcolor
   } bdef
end def
/setgcolor	% (null | <color...>) <colorspace> setgcolor -
 { 1 index //null eq
    { pop pop }
    { dup 0 get //Cdict exch get exec }
   ifelse
 } bdef
% Compare the old and new color spaces in an attempt to avoid expensive
% reloads of CIEBased color spaces.
/PCSdict 15 dict dup begin	% <colorspace> -proc- <colorspace|pdfcspace>
  /CIEBasedA { dup 1 get /PDFColorSpace .knownget { exch pop } if } bdef
  /CIEBasedABC /CIEBasedA load def
  /CIEBasedDEF /CIEBasedA load def
  /CIEBasedDEFG /CIEBasedA load def
  /Indexed {
    dup 1 get dup pdfcolorspace 2 copy ne { 3 1 roll } if pop pop
  } bdef
end def
/pdfcolorspace {	% <colorspace> pdfcolorspace <colorspace|pdfcspace>
  dup type /arraytype eq {
    //PCSdict 1 index 0 get .knownget { exec } if
  } if
} bdef
/setgcolorspace {	% <colorspace> setgcolorspace -
  dup pdfcolorspace currentcolorspace pdfcolorspace eq {
    pop
  } {
    setcolorspace
  } ifelse
} bdef

/OPsavedict 2 dict def		% for saveOP, saveBM

% colorspaces that don't require special overprint transparency handling
/okOPcs mark /DeviceGray 0 /DeviceCMYK 1 /DeviceN 2 /Separation 3 .dicttomark def

/checkOPtrans	% <fillop|strokeop> checkOPtrans <bool>
% return true if OP needs special transparency treatment
% If the colorspace is not one where overprint makes sense, no special handling (return false)
% NB: This will get replaced with a quick "no-op" if the device doesn't support Overprint
{  % Check OP and BM in case we need to push a group
    okOPcs currentcolorspace 0 get dup /Indexed eq {
       pop currentcolorspace 1 get	% use the base space
    } if
    known {
       /stroke ne { .currentfilloverprint
       } { .currentstrokeoverprint
       } ifelse
       .currentblendmode dup /Normal eq exch /Compatible eq or not and
   } {
      pop //false
   } ifelse
} bdef

/fsexec		% <fillop|strokeop> fsexec -
{
   PDFusingtransparency {
      .currentSMask //null ne {
        mark /Subtype /Group /Isolated //true .dicttomark pathbbox .begintransparencygroup
        .currentshapealpha .currentopacityalpha 3 -1 roll % avoid double application
        1 .setopacityalpha 1 .setshapealpha
      } if
      dup checkOPtrans exch 1 index {
         % We need to push a non-isolated, non-knockout transparency group and
         % perform the operation in CompatibleOverprint mode, then end the
         % transparency group. Do the begintransparencygroup step here.
         mark /Subtype /Group /Isolated //false .dicttomark pathbbox .begintransparencygroup
         .currentblendmode .currentopacityalpha 4 -2 roll % save current values
         /CompatibleOverprint .setblendmode 1 .setopacityalpha
      } if
      cvx exec
      {
         .endtransparencygroup .setopacityalpha .setblendmode	% end the CompatibleOverprint group
      } if
      .currentSMask //null ne {
       .endtransparencygroup .setopacityalpha .setshapealpha
      } if
   } {
      cvx exec
   } ifelse
} bdef

% ---------------- Path painting and clipping ---------------- %

%% Bug #696017 In order to get the correct position of paths and other objects which
%% are illegally present inside a text block, we need to use the saved TextSaveMatrix
%% to construct/place them. But we don't want to do lots of lookups on every segment of
%% a path (we feel its OK to do lookups for images). So what we do is redefine the
%% path contruction operators at the beginning of a text block, and put them back afterwards.
%% Here we define the 'normal' and 'inside text' versions of those operators, and routines
%% to switch the definitions back and forth.

/check_and_set_saved_matrix {
  currentdict /TextSaveMatrix known {
    currentdict /TextSaveMatrix get setmatrix
  }
  {
    currentdict /qTextSaveMatrix known {
      currentdict /qTextSaveMatrix get setmatrix
    } if
  } ifelse
} bind def

/normal_m { { moveto }  stopped { count pdfemptycount sub 2 .min { pop } repeat 0 0 moveto } if } bdef
/inside_text_m {
  {
    matrix currentmatrix 3 1 roll
    check_and_set_saved_matrix
    moveto
    setmatrix
  }
  stopped { count pdfemptycount sub 2 .min { pop } repeat 0 0 moveto } if
} bdef

/normal_l { { lineto }  stopped { count pdfemptycount sub 2 .min { pop } repeat } if } bdef
/inside_text_l {
  {
    matrix currentmatrix 3 1 roll
    check_and_set_saved_matrix
    lineto
    setmatrix
  }
  stopped { count pdfemptycount sub 2 .min { pop } repeat } if
} bdef

/normal_c { { curveto } stopped { count pdfemptycount sub 6 .min { pop } repeat } if } bdef
/inside_text_c {
  {
    matrix currentmatrix 7 1 roll
    check_and_set_saved_matrix
    curveto
    setmatrix
  }
  stopped { count pdfemptycount sub 6 .min { pop } repeat } if
} bdef

/normal_v { count pdfemptycount sub 4 ge {
         { currentpoint 6 2 roll curveto } stopped { count pdfemptycount sub 6 .min { pop } repeat  } if
       } {
         count pdfemptycount sub { pop } repeat
       } ifelse
     } bdef
/inside_text_v { count pdfemptycount sub 4 ge {
         {
           matrix currentmatrix 5 1 roll
           check_and_set_saved_matrix
           currentpoint 6 2 roll curveto
           setmatrix
         } stopped { count pdfemptycount sub 6 .min { pop } repeat  } if
       } {
         count pdfemptycount sub { pop } repeat
       } ifelse
     } bdef

/normal_y { { 2 copy curveto } stopped { count pdfemptycount sub 6 .min { pop } repeat } if } bdef
/inside_text_y {
  {
    matrix currentmatrix 5 1 roll
    check_and_set_saved_matrix
    2 copy curveto
    setmatrix
  }
  stopped { count pdfemptycount sub 6 .min { pop } repeat } if
} bdef

/normal_re {
   4 2 roll moveto  exch dup 0 rlineto  0 3 -1 roll rlineto  neg 0 rlineto
   closepath
  } bdef
/inside_text_re {
   matrix currentmatrix 5 1 roll
   check_and_set_saved_matrix
   4 2 roll moveto  exch dup 0 rlineto  0 3 -1 roll rlineto  neg 0 rlineto
   closepath
   setmatrix
  } bdef

/S {
  OFFlevels length 0 eq {
    setstrokestate .swapcolors /stroke fsexec .swapcolors
  } {
    newpath
  } ifelse
} bdef

/f {
  OFFlevels length 0 eq {
    setfillstate /fill fsexec
  } {
    newpath
  } ifelse
} bdef

/f* {
  OFFlevels length 0 eq {
    setfillstate /eofill fsexec
  } {
    newpath
  } ifelse
} bdef

/n { newpath } bdef		% don't allow n to get bound in

/s { closepath S } bdef

/B {
  OFFlevels length 0 eq {
         PDFusingtransparency {
                % knockout trans group around the filled and stroked object
                mark
                /Isolated //true /Knockout //true
                .dicttomark
                % strokepath will return empty path (no currentpoint) if nothing is stroked
                gsave { strokepath pathbbox } stopped grestore not {
            1 .setopacityalpha
                        .begintransparencygroup
                        gsave setfillstate fill grestore
                        setstrokestate .swapcolors /stroke fsexec .swapcolors
                        .endtransparencygroup
                } { newpath pop } ifelse
         } {
                gsave setfillstate fill grestore
                setstrokestate .swapcolors /stroke fsexec .swapcolors
        } ifelse
  } {
    newpath
  } ifelse
} bdef

/b { closepath B } bdef

/B* {
  OFFlevels length 0 eq {
         PDFusingtransparency {
                % knockout trans group around the filled and stroked object
                mark
                /Isolated //true /Knockout //true
                .dicttomark
                % strokepath will return empty path (no currentpoint) if nothing is stroked
                gsave { strokepath pathbbox } stopped grestore not {
            1 .setopacityalpha
                        .begintransparencygroup
                        gsave setfillstate eofill grestore
                        setstrokestate .swapcolors /stroke fsexec .swapcolors
                        .endtransparencygroup
                } { newpath pop } ifelse
         } {
                gsave setfillstate eofill grestore
                setstrokestate .swapcolors /stroke fsexec .swapcolors
        } ifelse
  } {
    newpath
  } ifelse
} bdef

/b* { closepath B* } bdef

% Clipping:

/Wdict 8 dict dup begin
/S { OFFlevels length 0 eq { gsave setstrokestate .swapcolors stroke .swapcolors grestore } if n } bdef
/f { OFFlevels length 0 eq { gsave setfillstate fill grestore } if n } bdef
/f* { OFFlevels length 0 eq { gsave setfillstate eofill grestore } if n } bdef
/B {
  OFFlevels length 0 eq {
    PDFusingtransparency {
      % knockout trans group around the filled and stroked object
      mark
      /Isolated //true /Knockout //true
      .dicttomark
      % strokepath will return empty path (no currentpoint) if nothing is stroked
      gsave {strokepath pathbbox } stopped grestore not
      {
        1 .setopacityalpha
        .begintransparencygroup
        gsave setfillstate fill grestore
        setstrokestate .swapcolors /stroke fsexec .swapcolors
        .endtransparencygroup
      } {
        newpath pop
      } ifelse
    } {
      gsave setfillstate fill grestore
      setstrokestate .swapcolors /stroke fsexec .swapcolors
    } ifelse
  } if
  n
} bdef
/b { closepath B } bdef
/B* {
  OFFlevels length 0 eq {
    PDFusingtransparency {
      % knockout trans group around the filled and stroked object
      mark
      /Isolated //true /Knockout //true
      .dicttomark
      % strokepath will return empty path (no currentpoint) if nothing is stroked
      gsave {strokepath pathbbox} stopped grestore not {
        1 .setopacityalpha
        .begintransparencygroup
        gsave setfillstate eofill grestore
        setstrokestate .swapcolors /stroke fsexec .swapcolors
        .endtransparencygroup
      } { newpath pop } ifelse
    } {
      gsave setfillstate eofill grestore
      setstrokestate .swapcolors /stroke fsexec .swapcolors
    } ifelse
  } if
  n
} bdef
/b { closepath B* } bdef
/n { end { currentpoint } stopped not { pop pop clip } if newpath } bdef
end readonly def
/W { //Wdict begin } bdef
/W*dict 8 dict dup begin
Wdict { def } forall
/n { end { currentpoint } stopped not { pop pop eoclip } if newpath } bdef
end readonly def
/W* { //W*dict begin } bdef
% ---------------- Text control ---------------- %

/textbeginpage
 {
   1.0 .settexthscaling
   /FontMatrixNonHV //false def
   /Show { showfirst } def
   /TextFillStateNeeded //true def
 } bdef

/TestDegenerateCTM {
  matrix currentmatrix
  dup 0 get
  exch dup 3 get
  exch dup 1 get
  exch 2 get
  mul
  3 1 roll mul
  exch sub
  0 eq {
    true
  }{
    false
  } ifelse
} bdef

% Contrary to the statement in the PDF manual, BT and ET *can* be nested,
% if the CharProc for a Type 3 font does a BT/ET itself.
% Since we always call the CharProc inside a q/Q, we simply ensure that
% the text state is saved and restored like the rest of the extended
% graphics state.

/settextmatrix {
  matrix currentmatrix
  matrix .currenttextmatrix
  concat
  TestDegenerateCTM {
    (\n   **** Error:  Degenerate text matrix detected, ignoring Tm operation\n) pdfformaterror
    (                 Output may be incorrect.\n) pdfformaterror
    setmatrix
  } {
    pop
  } ifelse
  .currenttexthscaling
  1 ne { .currenttexthscaling
  1 scale } if
  .currenttextrise 0 ne { 0 .currenttextrise
   translate } if
} bdef

/settextstate {
        % The text state can be set even outside BT/ET.
  currentdict /TextSaveMatrix known {
    TextSaveMatrix
    aload pop
    5 index 0 ne 3 index 0 ne and
    5 index 0 ne 5 index 0 ne and or not {
      (\n   **** Error: Invalid (0 scaling) text matrix for Tm ****\n)
      pdfformaterror
      (                 Output may be incorrect.\n) pdfformaterror
      % handle invalid scale by using a really small value
      2 -6 roll pop pop pop pop
      0.00000001 0 0 0.00000001
      6 -2 roll
    }if
    6 array astore
    setmatrix settextmatrix
  } if
} bdef
/settextposition {
                % Update the TextMatrix translation.
  gsave TextSaveMatrix setmatrix
  {currentpoint} stopped not {
    .currenttextrise
    sub
    matrix .currenttextmatrix
    dup 5 4 -1 roll put
    dup 4 4 -1 roll put
    .settextmatrix
                % We would like to do "grestore currentpoint translate"
                % here, but some PDF files set a singular text matrix
                % (0 0 0 0 <x> <y> Tm), so we can't do this.
    TextTempMatrix identmatrix setmatrix currentpoint
    matrix .currenttextmatrix
    grestore
    .settextmatrix
    TextTempMatrix currentmatrix 4 2 getinterval astore pop
    TextTempMatrix setmatrix
  } {
      (   **** Error: Invalid currentpoint, probable degenerate CTM.\n) pdfformaterror
      (               Ignroing error, output may be incorrect.\n) pdfformaterror
    grestore
  } ifelse
} bdef

/switch_to_text_marking_ops {
    pdfopdict /m {inside_text_m} bind .forceput
    pdfopdict /l {inside_text_l} bind .forceput
    pdfopdict /c {inside_text_c} bind .forceput
    pdfopdict /v {inside_text_v} bind .forceput
    pdfopdict /y {inside_text_y} bind .forceput
    pdfopdict /re {inside_text_re} bind .forceput
} bdef

/switch_to_normal_marking_ops {
    pdfopdict /m {normal_m} bind .forceput
    pdfopdict /l {normal_l} bind .forceput
    pdfopdict /c {normal_c} bind .forceput
    pdfopdict /v {normal_v} bind .forceput
    pdfopdict /y {normal_y} bind .forceput
    pdfopdict /re {normal_re} bind .forceput
} bdef

/BT {
  currentdict /TextSaveMatrix known {
    (   **** Error: illegal nested BT operator detected.\n)
    pdfformaterror
    (               Output may be incorrect.\n) pdfformaterror
    ET_NO_TXT_KO  %% Does not push any compositor actions
  } if

  %% Bug #695897 see the explanation in /q defined above.
  currentdict /qTextSaveMatrix known {
    currentdict /qTextSaveMatrix get /TextSaveMatrix gput
    (   **** Error: Illegal nested BT operator (inside a gsave) detected.\n)
    pdfformaterror
    (               Output may be incorrect.\n) pdfformaterror
    ET_NO_TXT_KO  %% Does not push any compositor actions
  } if
  currentdict /n known {
    currentdict end
    /.W exch def
  } if
  matrix .settextlinematrix
  matrix .settextmatrix

  { showfirst } /Show gput
  currentdict /TextSaveMatrix .knownget not {
    matrix dup /TextSaveMatrix gput
  } if currentmatrix pop settextmatrix
  matrix /TextTempMatrix gput		% see settextposition

  %% Set the special version of the path constructoin operators, so that
  %% they will work as expected if they are illgeally present in a text block.
  switch_to_text_marking_ops
  
  %% If needed, let the pdf14 device know we are in a BT condition.  This
  %% distinguishes BT from an Annotation /FreeText show command which also
  %% can come into pdf_text_begin with an opacity not equal to 1.
  PDFusingtransparency .currenttextknockout and {
    .begintransparencytextgroup
  } if
  
} bdef

/ET_NO_TXT_KO {
  currentdict /TextSaveMatrix known {
    .currenttextrenderingmode 4 ge { .currentfilladjust 0 .setfilladjust clip .setfilladjust} if
    newpath TextSaveMatrix setmatrix
    currentdict /TextSaveMatrix undef

    % if we were in a W/W* context, grab the dict, undefine temp entry for it,
    % and push it back on the dict stack
    currentdict /.W known {
      .W
      currentdict /.W undef
      begin
    } if
  } {
     (   **** Error: Ignoring spurious ET operator.\n)
     pdfformaterror
     (               Output may be incorrect.\n) pdfformaterror
  } ifelse
  %% Only switch back to the regular marking operations if we were not
  %% in a nested text block (inside a gsave).
  currentdict /qTextSaveMatrix known not {
    switch_to_normal_marking_ops
  } if
} bdef

/ET {
  //ET_NO_TXT_KO exec
  % Group push occurred in pdf14_text_begin.
  PDFusingtransparency .currenttextknockout and {
    .endtransparencytextgroup
  } if 
} bdef

/Tc { .settextspacing { showfirst } /Show gput } bdef
/TL { .settextleading } bdef
/Tr { .settextrenderingmode { showfirst } /Show gput } bdef
/Ts { .settextrise settextstate } bdef
/Tw { .setwordspacing { showfirst } /Show gput } bdef
/Tz {
  dup 0 eq {
    (\n   **** Error: Invalid 0.0 horizontal text scaling given for Tz\n)
    (                 Output may be incorrect.\n) pdfformaterror
    pdfformaterror
    pop 0.00000001	% handle invalid scale by using a really small value
  }{
    100 div
  }ifelse .settexthscaling %/TextHScaling gput
  settextstate} bdef

% ---------------- Font control ---------------- %

% Test if the FontMatrix could transform a horizontal/vertical (depending
% on writing mode) advance vector in glyph space into one with a different
% direction in text space.
% - if FontMatrix = [a b c d tx ty], this condition translates to:
%       b != 0 for horizontal writing mode
%       c != 0 for vertical writing mode
% - when false, we automatically have wy/x == 0 in text space whenever wy/x == 0
%   in glyph space, and can avoid the slow method that is otherwise necessary
%   to implement zeroing wy/x cf PDF Ref 5.3.3 "Text space details"
    % Worker procedure for testing a single font matrix
/?FontMatrixNonHV {		    % ?horz <<fontdict>> -- ?horz ?nonhv
    /FontMatrix .knownget {
        1 index { 1 } { 2 } ifelse get 0 ne
    } {
        //false
    } ifelse
} bdef
    % Worker procedure for recursive checking of font matrices
/?FontMatrixNonHV {		    % {self} ?horz <<font>> -- {self} ?horz ?nonhv
    2 copy //?FontMatrixNonHV exec {	    % check the font's own FontMatrix
        pop pop //true
    } {
        % look for descendents/ components
        pop				    % {self} ?horz <<font>>
        dup /FontType get
        dup 0 eq {			    % Type 0: look into FDepVector
            pop /FDepVector get 2 index	    % {self} ?horz [fonts..] {testproc}
        } {
            9 eq {			    % Type 9 (CIDFontType 0): check FDArray
                /FDArray get //?FontMatrixNonHV
            } {				    % all others: nothing more to check
                pop {} {}
            } ifelse
        } ifelse
        %stack: {self} ?horz [fonts..] {testproc}
        //false 5 2 roll {		    % {testproc} false {self} ?horz <<subfont>>
            4 index exec {
                4 -1 roll pop //true 4 1 roll
                exit
            } if
        } forall
        %stack: {testproc} ?nonhv {self} ?horz
        4 2 roll exch pop
    } ifelse
} bdef
    % Main procedure
/?FontMatrixNonHV {		% <<rootfont>> -- ?nonhv
    //?FontMatrixNonHV exch
    % determine WMode
    dup /WMode .knownget { 0 eq } { //true } ifelse % {proc} <<rootfont>> ?horz
    exch
    % call the worker procedure
    //?FontMatrixNonHV exec
    exch pop exch pop
} bdef

/Tf {		% <font> <scale> Tf -
  dup 0 eq {
    (\n   **** Error: Invalid 0.0 font scale given for Tf\n)
    pdfformaterror
    (          Output may be incorrect.\n) pdfformaterror
    pop 0.00000001	% handle invalid scale by using a really small value
  } if
  1 index type /dicttype ne {
    selectfont currentfont
  } {
    dup 1 eq { pop } { scalefont } ifelse
  }
  ifelse
  dup ?FontMatrixNonHV dup FontMatrixNonHV ne {
    /FontMatrixNonHV gput
    { showfirst } /Show gput
  } {
    pop
  } ifelse
  setfont
} bdef

% Copy a font, removing its FID.  If changed is true, also remove
% the UniqueID and XUID, if any.  If the original dictionary doesn't have
% the keys being removed, don't copy it.
/.copyfontdict		% <font> <changed> .copyfontdict <dict>
 {
   1 index /.OrigUniqueIDXUID .knownget
   {//false}
   {
     1 index /XUID .knownget
     {
       //true 1 index {0 gt and} forall
       {//false}{pop //true} ifelse
     }
     {
       //true
     }ifelse
   } ifelse

   {
     1 index /UniqueID .knownget
     {[exch]}{//null} ifelse
   } if
   3 1 roll

   1 index /FID known
   1 index { 2 index /UniqueID known or 2 index /XUID known or } if
    {		% We add 1 to the length just in case the original
                % didn't have a FID.
      exch dup length 1 add dict exch
       {		% Stack: changed newfont key value
         1 index /FID eq
         not { 3 copy put } if pop pop
       }
      forall exch
    }
   if pop

   1 index //null eq
   {exch pop}
   {dup 3 -1 roll /.OrigUniqueIDXUID exch put}
   ifelse

} bdef

% Insert a new Encoding or Metrics into a font if necessary.
% Return a possibly updated font, and a flag to indicate whether
% the font was actually copied.
/.updatefontmetrics {	% <font> <Metrics|null> .updatefontmetrics
                        %   <font'> <copied>
  dup //null ne {
    exch //true .copyfontdict dup /Metrics 4 -1 roll put //true
  } {
    pop //false
  } ifelse
} bdef

/.updatefontencoding {	% <font> <Encoding|null> .updatefontencoding
                        %   <font'> <copied>
  dup //null ne { dup 2 index /Encoding get ne } { //false } ifelse {
    exch //false .copyfontdict dup /Encoding 4 -1 roll put //true
  } {
    pop //false
  } ifelse
} bdef

% Duplicate keys in CharString dictionary according to GlyphMap: <</new_glyph /old_glyph>>
% We have to do this because PDF fonts can associate multiple widths with the same glyph
% but Metrics dictionary works by the glyph name.
/.update_charstring {	% <font> <GlyphMap> .update_charstring  <font'> <copied>
  dup //null ne {
    exch //true .copyfontdict       % map font
    dup dup /CharStrings get        % map font font cstr
    dup length                      % map font font cstr len
    4 index length add              % map font font cstr len+map_len
    dict copy dup begin             % map font font cstr'
    /CharStrings exch put           % map font
    exch {                          % font /new /old
      currentdict exch .knownget {
        def
      } {
        currentdict /.notdef .knownget {
          def
        } {
          pop
          % The font has no .notdef.
          % Could not resolve the conflict,
          % but either the font is invalid or the glyph name is never used.
        } ifelse
      } ifelse
    } forall
    end //true
  } {
    pop //false
  } ifelse
} bdef

/.updatefont {	      % <font> <Encoding|null> <Metrics|null> <GlyphMap|null>
                      %        .updatefont <font'> <copied>
  4 2 roll            % <Metrics|null> <GlyphMap> <font> <Encoding|null>
  .updatefontencoding % <Metrics|null> <GlyphMap> <font> bool
  4 1 roll exch       % bool <Metrics|null> <font> <GlyphMap>
  .update_charstring  % bool <Metrics|null> <font> bool
  3 1 roll exch       % bool bool <font> <Metrics|null>
  .updatefontmetrics  % bool bool <font> bool
  4 2 roll or or      % <font> is_copied
} bdef

% ---------------- Text positioning ---------------- %

/Td {
  %% Bug #695950 - invalid parameter to 'Td' operator
  %% Technically the parameters to Td are reals and can vary +/- 3.403x10^38
  %% However that would be kind of hard to validate, and in any event these
  %% are somewhat unlikely numbers. We validate against +/- 2^32 instead. If this
  %% should ever be a problem we'll have to modify this check.
  %% Testing reveals that Acrobat clamps these out of range values to 0, it doesn't
  %% simply ignore the error.
  exch dup dup 4294967295 ge exch 4294967295 neg le or {
    (   **** Error: invalid argument to Td, Treating argument as 0.\n) pdfformaterror
    (               Output may be incorrect.\n) pdfformaterror
    pop 0
  } if
  exch dup dup 4294967295 ge exch 4294967295 neg le or {
    (   **** Error: invalid argument to Td, Treating argument as 0.\n) pdfformaterror
    (               Output may be incorrect.\n) pdfformaterror
    pop 0
  } if
  matrix .currenttextlinematrix transform
  matrix .currenttextlinematrix
  dup 3 -1 roll 5 exch put
  dup 3 -1 roll 4 exch put
  .settextlinematrix
  matrix .currenttextlinematrix .settextmatrix

  settextstate
} bdef
/TD { dup neg .settextleading Td } bdef
/T* { 0 .currenttextleading neg Td } bdef
/Tm {
  5 index 0 ne 3 index 0 ne and
  5 index 0 ne 5 index 0 ne and or not {
    (   **** Error: Invalid (0 scaling) text matrix for Tm ****\n)
    pdfformaterror
    (               Output may be incorrect.\n) pdfformaterror
    % handle invalid scale by using a really small value
    2 -6 roll pop pop pop pop
    0.00000001 0 0 0.00000001
    6 -2 roll
  }if
  matrix .currenttextlinematrix astore .settextlinematrix
  matrix .currenttextlinematrix .settextmatrix
  settextstate
} bdef

% ---------------- Text painting ---------------- %

/Vexch {
  rootfont /WMode knownoget { 1 eq { exch } if } if
} bind def

/textrenderingprocs [		% (0 is handled specially)
        % Painting-only modes
   { tf } { tS } { tB } { tn }
        % Clipping modes
   { gsave tf grestore tW }
   { gsave tS grestore tW }
   { gsave tB grestore tW }
   { tW }
] readonly def

/pdfwrite_textrenderingprocs [
        % Tr 0 - Fill
        { setfillstate show } bind
        % Tr 1 - Stroke
        { currentlinewidth exch setstrokestate
        % Need to set the stroke width to a value which gives the correct
        % width under pdfwrite. Pdfwrite uses (in text mode) an identity
        % CTM, so we need to calculate the stroke width which would result
        % if the CTM had been unity.
          currentlinewidth dup
          matrix defaultmatrix idtransform TextSaveMatrix dtransform
          abs 2 copy exch abs eq {
            pop
          }{
            % non-square scaling reduces to Text matrix in pdfwrite , so
            % we can ignore it. (wrong answer, but consistent)
            pop pop currentlinewidth
          }ifelse setlinewidth
          show setlinewidth} bind
        % Tr 2 - Fill then Stroke
        { currentlinewidth exch setstrokestate
        % Need to set the stroke width to a value which gives the correct
        % width under pdfwrite. Pdfwrite uses (in text mode) an identity
        % CTM, so we need to calculate the stroke width which would result
        % if the CTM had been unity.
          currentlinewidth dup
          matrix defaultmatrix idtransform TextSaveMatrix dtransform
          abs 2 copy exch abs eq {
            pop
          }{
            % non-square scaling reduces to Text matrix in pdfwrite , so
            % we can ignore it. (wrong answer, but consistent)
            pop pop currentlinewidth
          }ifelse setlinewidth
          setfillstate show setlinewidth} bind
        % Tr 3 - Neither fill nor stroke
        { setfillstate show } bind
        %
        % pdfwrite emits all text inside a gsave/grestore pair. As
        % a result we can't preserve any of the 'clip' modes, as the
        % clip gets undone by the restore. We need to handle the clip
        % separately.
        %
        % Tr 4 - Fill, add to clip
        { gsave 0 .settextrenderingmode
          setfillstate dup show grestore //true charpath } bind
        % Tr 5 - Stroke, add to clip
        { gsave 1 .settextrenderingmode
          currentlinewidth dup
          matrix defaultmatrix idtransform TextSaveMatrix dtransform
          abs 2 copy exch abs eq {
            pop
          }{
            % non-square scaling reduces to Text matrix in pdfwrite , so
            % we can ignore it. (wrong answer, but consistent)
            pop pop currentlinewidth
          }ifelse setlinewidth
          setstrokestate dup show grestore
          //true charpath} bind
        % Tr 6 - Fill, stroke, add to clip
        { gsave 2 .settextrenderingmode
          currentlinewidth dup
          matrix defaultmatrix idtransform TextSaveMatrix dtransform
          abs 2 copy exch abs eq {
            pop
          }{
            % non-square scaling reduces to Text matrix in pdfwrite , so
            % we can ignore it. (wrong answer, but consistent)
            pop pop currentlinewidth
          }ifelse setlinewidth
          setstrokestate setfillstate dup show grestore
          //true charpath} bind
        % Tr 7 - Add to clip
        { //true charpath} bind
] readonly def

/setstrokeforTrpreservation {
      % Check to see if the current device supports Tr
      /PreserveTrMode /GetDeviceParam .special_op {
          exch pop
      }{
          //false
      }ifelse
      {
        .currenttextrenderingmode 1 eq .currenttextrenderingmode 2 eq or
        .currenttextrenderingmode 5 eq .currenttextrenderingmode 6 eq or or {
          setstrokestate
          % Need to set the stroke width to a value which gives the correct
          % width under pdfwrite. Pdfwrite uses (in text mode) an identity
          % CTM, so we need to calculate the stroke width which would result
          % if the CTM had been unity. NOTE! Only interested in magnitudes,
          % not signs.
          currentlinewidth dup
          matrix defaultmatrix idtransform TextSaveMatrix dtransform
          abs 2 copy exch abs eq {
            pop
          }{
            % non-square scaling reduces to Text matrix in pdfwrite , so
            % we can ignore it. (wrong answer, but consistent)
            pop pop currentlinewidth
          }ifelse
          setlinewidth
      } if
    } if
} bind def

% conditionally set fillstate to avoid multiple operations during text operators
/settextfillstate {
  TextFillStateNeeded { setfillstate //false /TextFillStateNeeded gput } if
} bind def

% If current path is not known to be valid, use the clip path
/TextTransSetup {	% showarg path_valid TextTransSetup false showarg
                        % showarg path_valid false TextTransSetup prev_BM prev_opacity true showarg
   % NB: if 'show' is used, then we use the clippath, but a smaller bbox is preferred
   .currentSMask //null ne {
     dup mark /Subtype /Group /Isolated //true .dicttomark exch
     { pathbbox } { gsave clippath pathbbox grestore } ifelse
     .begintransparencygroup
   } if
   //null checkOPtrans {
     % We need to push a non-isolated, non-knockout transparency group and
     % perform the operation in CompatibleOverprint mode, then end the
     % transparency group. Do the begintransparencygroup step here.
     mark /Subtype /Group /Isolated //false .dicttomark exch
     { pathbbox } { gsave clippath pathbbox grestore } ifelse
     .begintransparencygroup
     OPsavedict dup /saveBM .currentblendmode put /saveOA .currentopacityalpha put % save current values
     /CompatibleOverprint .setblendmode 1 .setopacityalpha
   } {
     pop	% discard path_valid boolean
   } ifelse
} bind def

/TextTransTeardown {	% stack: path_valid
   .currentblendmode /CompatibleOverprint eq {
     % end the CompatibleOverprint group and restore the opacity and BM
     .endtransparencygroup
     OPsavedict dup /saveOA get .setopacityalpha /saveBM get .setblendmode
   } if
   .currentSMask //null ne {
     .endtransparencygroup
   } if
} bind def

/setshowstate
 {
   .currentwordspacing 0 eq .currenttextspacing
    0 eq and FontMatrixNonHV not and
    {
      % Check to see if the current device supports Tr
      /PreserveTrMode /GetDeviceParam .special_op {
          exch pop
      }{
          //false
      }ifelse
      {
              pdfwrite_textrenderingprocs .currenttextrenderingmode get
      }
      {
              .currenttextrenderingmode 0 eq
              currentfont /FontType get 3 eq .currenttextrenderingmode 3 eq not
              and or
               {
                { settextfillstate //false TextTransSetup show TextTransTeardown }
              } {
                .currenttextrenderingmode 3 eq {
                        % Some PDF files execute 'tm' with a singular matrix,
                        % and then use the text rendering mode 3.
                        % The graphics library currently cannot handle text
                        % operations when the CTM is singular.
                        % Work around this here.
                  {
                    matrix currentmatrix dup dup
                    dup 0 get 0 eq 1 index 1 get 0 eq and {
                      dup dup 2 get 0 eq { 0 }{ 1 } ifelse 1 put
                    } if
                    dup 2 get 0 eq 1 index 3 get 0 eq and {
                      dup dup 1 get 0 eq { 3 }{ 2 } ifelse 1 put
                    } if
                    setmatrix
                    currentpoint
                    % don't worry about transparency for invisible text
                    4 index settextfillstate show % Tr was set to graphic state.
                    moveto
                    setmatrix
                    % now set the currentpoint using the original matrix
                    gsave
                    setmatrix
                    //false charpath currentpoint newpath
                    grestore
                    moveto
                  }
                } {
                  { //false charpath textrenderingprocs .currenttextrenderingmode  get exec }
                } ifelse
              } ifelse
       } ifelse
    }
    {
      % If we are doing a plain old fill, or no text at all, *or* we are going to
      % a device supporting text rendering modes, then go through this route.
      %
      .currenttextrenderingmode 0 eq .currenttextrenderingmode 3 eq or
      currentfont /FontType get 3 eq or

      /PreserveTrMode /GetDeviceParam .special_op {
          exch pop
      }{
          //false
      }ifelse
      % pdfwrite can't handle rendering modes which involve clipping
      .currenttextrenderingmode 4 lt and or
      % Tr was set to graphic state.
      {
        FontMatrixNonHV {
           {
             % preserve current line width around possible stroke setup
             currentlinewidth exch
             setstrokeforTrpreservation
             settextfillstate //false TextTransSetup
             [ .currenttextspacing .currentwordspacing 3 index
               {					    % str [... weach wword c undef|ythis xthis|undef
                 exch % will be removed, unless FontMatrix.xx/yy == 0 (FontMatrixNonHV already true)
                 Vexch pop                                  % str [... weach wword c wthis
                 3 index add exch 32 eq {1 index add} if    % str [... weach wword w
                 3 1 roll                                   % str [... w weach wword
               }
               % for the "exch" removed or not below, see comment in pdf_font.ps::getfontmetrics
               currentfont /FontMatrix get 0 3 Vexch pop get 0 ne {
                 1 1 index length 1 sub getinterval cvx
               } if
               cshow pop pop ]
             { xshow } { yshow } Vexch pop exec
             setlinewidth TextTransTeardown
           }
         } {
           .currentwordspacing
           0 eq {
             {
               { setstrokeforTrpreservation
                 settextfillstate //false TextTransSetup .currenttextspacing
                 0 Vexch 3 -1 roll ashow TextTransTeardown
               }
               currentlinewidth
               { setlinewidth }
               3 .execn
             }
           } {
              .currenttextspacing 0 eq {
                { % preserve current line width around possible stroke setup
                  { setstrokeforTrpreservation
                    settextfillstate //false TextTransSetup .currentwordspacing
                    0 Vexch 32 4 -1 roll .pdfwidthshow
                    TextTransTeardown
                  }
                  currentlinewidth
                  { setlinewidth }
                  3 .execn
                }
              } {
                { % preserve current line width around possible stroke setup
                  { setstrokeforTrpreservation
                    settextfillstate //false TextTransSetup .currentwordspacing
                    0 Vexch 32
                    .currenttextspacing 0 Vexch 6 -1 roll .pdfawidthshow TextTransTeardown
                  }
                  currentlinewidth
                  { setlinewidth }
                  3 .execn
                }
              } ifelse
           } ifelse
         } ifelse
       }
       {
         { currentlinewidth exch
           .currentwordspacing
           .currenttextspacing
                        % Implement the combination of t3 and false charpath.
                        % Note that we must use cshow for this, because we
                        % can't parse multi-byte strings any other way.
                        % Stack: string wword wchar
            {
             exch % will be removed, unless FontMatrixNonHV && FontMatrix.xx/yy == 0
                        % Stack: str wword wchar ccode xthis ythis
             Vexch pop currentpoint 6 3 roll
                        % Stack: str wthis xorig yorig wword wchar ccode
             (x) dup 0 3 index put
             %
             % for devices which can handle the text rendering mode we don't want
             % to decompose into paths, we want to do a 'show'. However pdfwrite
             % can't handle clipping text, so we *do* want to do the clip path
             % as a 'true charpath'.
             %
              /PreserveTrMode /GetDeviceParam .special_op {
                  exch pop
              }{
                  //false
              }ifelse {
               % NB we must have Tr at least 4 or the test above would have
               % taken a different path, so we *know* the Tr involves clipping
               % or we wouldn't be here. Subtract 4 from the Tr and preserve
               % that mode, then do a charpath so the clip path gets set up
               % correctly.
               gsave .currenttextrenderingmode 4 sub .settextrenderingmode
               setstrokeforTrpreservation
               setstrokestate settextfillstate //false TextTransSetup dup show grestore TextTransTeardown } if
             //false charpath
             3 copy 32 eq { add } { exch pop } ifelse
                        % Stack: str wthis xorig yorig wword wchar ccode wextra
             7 -3 roll moveto add
             0 Vexch rmoveto pop
            }
            % for the "exch" removed or not below, see comment in pdf_font.ps::getfontmetrics
            FontMatrixNonHV dup not exch {
              currentfont /FontMatrix get 0 3 Vexch pop get 0 ne
            } if {
              1 1 index length 1 sub getinterval cvx
            } if
           4 -1 roll cshow pop pop
           %
           % If the device doesn't handle text rendering modes then we now have a suitable
           % path, so call the correct routine to stroke/fill it (clip is handled when we
           % get ET).
           %
             /PreserveTrMode /GetDeviceParam .special_op {
                 exch pop not
             }{
                 //true
             }ifelse {
             textrenderingprocs .currenttextrenderingmode get exec
           } if
           setlinewidth
         }
       }
      ifelse
    }
   ifelse /Show gput
 } bdef
/showfirst { setshowstate Show } def

/Tj {
  {
    //true /TextFillStateNeeded gput
    0 0 moveto Show settextposition
  }
  OFFlevels length 0 eq {
    exec
  } {
    gsave nulldevice exec grestore
  } ifelse
  //true /TextFillStateNeeded gput
} bdef
/' { T* Tj } bdef
/" { exch Tc exch Tw T* Tj } bdef
/TJ {
  { 0 0 moveto {
      dup type /stringtype eq {
        Show
      } { -1000 div
        currentfont /ScaleMatrix .knownget { 0 get mul } if
        0 Vexch rmoveto
      } ifelse
    } forall settextposition
  //true /TextFillStateNeeded gput
  }
  OFFlevels length 0 eq {
    exec
  } {
    gsave nulldevice exec grestore
  } ifelse
  //true /TextFillStateNeeded gput
} bdef

% NB: We don't need clippath when filling or stroking
/tf {
      //true /TextFillStateNeeded gput
      settextfillstate //true TextTransSetup currentpoint fill TextTransTeardown moveto
} bdef
/tn { currentpoint newpath moveto } bdef % Obsolete, never used.
% For stroking characters, temporarily restore the graphics CTM so that
% the line width will be transformed properly.
/Tmatrix matrix def
/tS
 {
   currentfont /FontType get 3 eq
   {
     settextfillstate //true TextTransSetup currentpoint fill TextTransTeardown moveto
   }
   {
     setstrokestate //true TextTransSetup
     currentpoint //Tmatrix currentmatrix TextSaveMatrix setmatrix .swapcolors stroke TextTransTeardown .swapcolors
     setmatrix moveto
   } ifelse
   //true /TextFillStateNeeded gput
 } bdef

% Handle transparency the same as /B operator
/tB {
       PDFusingtransparency {
          % knockout trans group around the filled and stroked object
          mark
          /Isolated //true /Knockout //true
          .dicttomark
          1 .setopacityalpha
          % While text will always have a currentpoint, strokepath seems to mess with it.
          % we get the currentpoint, then use moveto to restore it for pathbbox
          gsave currentpoint strokepath moveto pathbbox grestore
          .begintransparencygroup
          gsave tf grestore tS
          .endtransparencygroup
        } {
          gsave tf grestore tS
        } ifelse
   //true /TextFillStateNeeded gput
} bdef

% This does the wrong thing if there have been multiple text operations
% within a single BT/ET pair, but it's a start.
/tW { } bdef

%% split a string containing \r or \n into multiple strings)
%% \r\n is also handled.
%% (string) .splitstring (string1) (string2) .....
/.splitstring {
  0 exch                       %% start_index string
  dup length 1 sub             %% start_index string (string length - 1)
  0 1 3 -1 roll                %% start_index string 0 1 (string_length -1)
  {                            %% start_index string loop_index
    dup                        %% start_index string loop_index loop_index
    2 index exch get           %% start_index string loop_index character
    dup 10 eq exch 13 eq or {  %% start_index string loop_index
      dup 3 index              %% start_index string loop_index loop_index start_index
      sub                      %% start_index string loop_index (loop_index - start_index)
      dup 0 gt {               %% \r\n will give us a 0 length string so ignore it
        3 index exch           %% start_index string loop_index start_index (loop_index - start_index)
        3 index 3 1 roll       %% start_index string loop_index string start_index (loop_index - start_index)
        getinterval            %% start_index string loop_index sub_string
        4 1 roll               %% sub_string start_index string loop_index
        1 add
        3 -1 roll              %% sub_string string loop_index start_index
        pop exch               %% sub_string loop_index string %% loop_index becomes new start_index
      }{
        pop                    %% start_index string loop_index
        1 add 3 1 roll exch    %% loop_index string start_index
        pop                    %% loop_index string %% loop_index becomes new start index
      } ifelse
    }{
      pop                      %% start_index string
    } ifelse
  } for
                               %% start_index string
  dup length 2 index sub dup   %% start_index string (length - start_index) (length - start_index)
  0 gt {                       %% we have characters left %% start_index string (length - start_index)
    3 -1 roll exch             %% string start_index (length - start_index)
    getinterval                %% sub_string
  } {
    pop pop pop
  } ifelse
} bind def

% Text formatting and painting for the AcroForm field without appearance streams.
/Tform {                % <MaxLen> (V) <Ff> <Q> Tform -
  clippath pathbbox 4 2 roll pop pop                        % MaxLen (V) Ff Q dx dy
  currentfont /ScaleMatrix .knownget { 3 get } { 1 } ifelse % MaxLen (V) Ff Q dx dy yy

  currentfont /FontBBox .knownget
  not
  {
    currentfont dup /FontType get
    0 eq
    {
     /FDepVector get 0 get /FontBBox get}
    {
      pop null % force an error
    } ifelse
  }if
  dup 1 get neg exch 3 get        % MaxLen (V) Ff Q dx dy yy desc asc

  dup 0 ne { div } { pop pop 0 } ifelse                     % MaxLen (V) Ff Q dx dy yy desc/asc
  1 index mul                                               % MaxLen (V) Ff Q dx dy yy desc/asc*yy

  %% Check if this is declared as a multiine text widget, and if it is
  %% check that the string has at least 2 characters, so we can split it
  %% into at least two strings....
  %% Bug #687498.pdf has a multiline text widget with an empty string (amongst
  %% many other problems with this file).
  5 index 16#1000 and 0 ne 7 index length 1 gt and{ % multiline
    %% First lets see how many lines we have, make a copy of the string
    6 index mark exch .splitstring                      % MaxLen (V) Ff Q dx dy yy desc/asc*yy [ () () ...
    counttomark 1 add 4 add index                       % MaxLen (V) Ff Q dx dy yy desc/asc*yy [ () () ... count Q
    dup 0 eq {
      pop                                               % remove extra copy of Q
      counttomark dup 2 add 2 add index exch div        % MaxLen (V) Ff Q dx dy yy desc/asc*yy [ () () ... line_height
      counttomark 1 add 1 roll                          % MaxLen (V) Ff Q dx dy yy desc/asc*yy line_height [ () () ...
      2 0 moveto                                        % start at bottom left of rect
      counttomark 1 1 3 -1 roll {                       % for every string
        pop gsave
        <EFBBBF> anchorsearch {
          pop
        } {
          <FEFF> anchorsearch {
              pop
          } if
        } ifelse
        Show grestore                         % pop loop counter, show string (saving current point)
        counttomark 1 add index 0 exch rmoveto          % get line height, move that amount vertically.
      } for
      pop pop
    }{
      1 eq {
        counttomark dup 2 add 2 add index exch div        % MaxLen (V) Ff Q dx dy yy desc/asc*yy [ () () ... line_height
        counttomark 1 add 1 roll                          % MaxLen (V) Ff Q dx dy yy desc/asc*yy line_height [ () () ...
        2 0 moveto                                        % start at bottom left of rect
        counttomark 1 1 3 -1 roll {                       % for every string
          pop gsave                                       % pop loop counter
          <EFBBBF> anchorsearch {
            pop
          } {
            <FEFF> anchorsearch {
                pop
            } if
          } ifelse
          dup stringwidth pop counttomark 5 add index     % get rectangle width
          exch sub 2 div 0 rmoveto                        % subtract width of string, divide by 2 move that amount
          Show grestore                                   % show string
          counttomark 1 add index 0 exch rmoveto          % get line height, move that amount vertically.
        } for
        pop pop
      }{
        counttomark dup 2 add 2 add index exch div        % MaxLen (V) Ff Q dx dy yy desc/asc*yy [ () () ... line_height
        counttomark 1 add 1 roll                          % MaxLen (V) Ff Q dx dy yy desc/asc*yy line_height [ () () ...
        2 0 moveto                                        % start at bottom left of rect
        counttomark 1 1 3 -1 roll {                       % for every string
          pop gsave                                       % pop loop counter
          <EFBBBF> anchorsearch {
            pop
          } {
            <FEFF> anchorsearch {
                pop
            } if
          } ifelse
          dup stringwidth pop counttomark 5 add index     % get rectangle width
          exch sub 2 sub 0 rmoveto                        % subtract width of string,move that amount
          Show grestore                                   % show string
          counttomark 1 add index 0 exch rmoveto          % get line height, move that amount vertically.
        } for
        pop pop
      }ifelse
    }ifelse
    8 { pop } repeat
  } {
    5 index 16#1000000 and 0 ne { % comb
      8 { pop } repeat (Combed form fields are not yet implemented.) =
    } { % plain text
      3 1 roll sub add 2 div             % MaxLen (V) Ff Q dx (dy-yy+desc)/2
      0 exch moveto                      % MaxLen (V) Ff Q dx
      1 index 0 ne {
        3 index
        <EFBBBF> anchorsearch {
          pop
        } {
          <FEFF> anchorsearch {
              pop
          } if
        } ifelse
        stringwidth pop          % MaxLen (V) Ff Q dx w
        sub exch 1 eq { 2 div } { 2 sub } ifelse % MaxLen (V) Ff (dx-w)/2
        0 rmoveto                        % MaxLen (V) Ff
        pop                              % MaxLen (V)
      } {
        pop pop pop                      % MaxLen (V)
        2 0 rmoveto
      } ifelse
      exch pop
      <EFBBBF> anchorsearch {
        pop
      } {
        <FEFF> anchorsearch {
            pop
        } if
      } ifelse
      Show                      % -
    } ifelse
  } ifelse
} bdef

end readonly put		% GS_PDF_ProcSet

.setglobal