path: root/Master/texmf-dist/tex/latex/export/dvipaste.sty

% Copyright (C) The TeXplorators Corporation 1989

% This is DVIPASTE.TEX, to be used with DVIPASTE.EXE, which is
% Copyright (C) The TeXplorators Corporation 1989.

% First we want to have a control sequence that stands for the current
% category code of @, so that we can restore this category code at the end,
% after temporarily making @ a letter (PLAIN makes @ category 12, but
% AmS-TeX, for example, makes @ category 13). Using \csname CCC@\endcsname,
% we can even let this control sequence be called \CCC@, before actually
% making @ a letter, except that this won't work when @ has category 
% code 13, so instead we have to use the \uccode and \uppercase trick.

% MODS by Jean-Pierre Drucbert (JPFD)
% - use \@@line in place of \line (LaTeX compatibility)
% - place the File number in the right margin (with \rlap)
% - make the microscopic rules really invisible (width 0sp)
%

{\uccode`\Z=`\@
 \uppercase{\expandafter\xdef\csname CCCZ\endcsname{\the\catcode`\@}}
}

% Now we make @ a letter.

\catcode`\@=11  


% \eat@ gobbles a token; it is the same as in AmS-TeX.

\def\eat@#1{}


% We need to know if a \sendout or \paste has already occurred.  The
% following are made true once the respective condition has occurred.

\newif\ifsendout@  
\newif\ifpaste@    


% We need to allocate places for writing or reading the .dat file.

\newwrite\writedata@    
\newread\readdata@      


% The definition of \sendout has the following features (%1, %2, etc.
% refer to lines so marked within the definition of \sendout):

%1  If \paste has occurred, we won't allow a \sendout to occur, because
%   these shouldn't both occur in the same file; in fact, files having
%   \sendout's will redefine the \output routine.

%   In the \errmessage, we can't say \string\sendout, because \sendout is
%   outer.  So we use \expandafter\eat@\string\\ to get the \, and then
%   spell out sendout.

%2  If a \paste hasn't occurred, we see if a previous \sendout has occurred,
%   and if it hasn't, we do the following:
    
%3  Open the .dat file for writing.
    
%4  Declare \t@nrm to use for the name of the file and the page number
%   in the footline (it is possible that no font with the necessary
%   characters in it has been used in the file); the declaration is made 
%   \global, just in case \sendout was used in a group, though it really 
%   shouldn't be.
    
%5  Set \topskip to 0pt.

%6  Change the \output routine, to simply \shipout the current page,
%   followed by a line 2pc below with the name of the file, and the
%   page number.
    
%7  We also want to redefine \bye, to close out the .dat file.  We can't
%   put \gdef\bye within the definition of \sendout, since \bye is outer,
%   but we can say \expandafter\gdef\csname bye\endcsname !
    
%8  And we make \ifsendout@ true.
    
%9  In any case (i.e., whether or not a previous \sendout has occurred),
%   we now put #1 in \box0, so that we can refer to its height, depth and
%   width (usually #1 will be a \box, but we don't know which one).
    
%10 Then we write this data to the .dat file; each \space will expand to a
%   space (PLAIN has \def\space{ }).
    
%11 We start the page with an invisible \hrule (so that the next \vskip
%   won't disappear).
    
%12 We move down to the bottom of the page.

%13 We emit a special, which tells where the .dvi instructions for
%   printing \box0 begin.
    
%14 We set the dimensions of \box0 to 0pt.
    
%15 We start an unindented paragraph with \box0.

%16 Then we emit another special, which tells where the .dvi instructions
%   for printing \box0 end.
    
%17 Finally, we put in a smashed (and tiny) \vrule.  Since this \vrule
%   has to occur exactly at the same position where the \noindent began,
%   the .dvi instructions for printing \box0 will bring us right back to
%   the position we started at.
    
%18 Then we \eject, so that the \output routine will simply print \box0 on 
%   a separate page.

\outer\def\sendout#1{%          
  \ifpaste@                                                                 %1
    \errmessage{\expandafter\eat@\string\\sendout and 
      \string\paste\space not allowed in same file 
      (\string\paste\space has already appeared)}%
  \else                                                                     %2
    \ifsendout@                                                             
    \else                                                                   
      \immediate\openout\writedata@=\jobname.dat                            %3
      \global\font\t@nrm=cmr10                                              %4
      \global\topskip\z@                                                    %5
      \global\output{\shipout\vbox{\vbox to\vsize{\unvbox255 }%             %6
      \baselineskip2pc
%     \@@line{\hfil\t@nrm File [\jobname], \#\number\count0\hfil}}%
      \@@line{\hfil\rlap{\t@nrm File [\jobname], \#\number\count0}\qquad\null}}%         %JPFD
        \global\advance\count0\@ne}%
      \expandafter\gdef\csname bye\endcsname                                %7
        {\immediate\closeout\writedata@\par\vfill\supereject\end}%
      \global\sendout@true                                                  %8
    \fi
    \setbox\z@\hbox{#1}%                                                    %9
    \immediate\write\writedata@
%      {\the\ht\z@\space\the\dp\z@\space\the\wd\z@}%                        %10
      {\number\csname ht\endcsname\z@ sp\space\number\csname dp\endcsname\z@ sp\space\number\csname wd\endcsname\z@ sp}%                        %10
    \hrule height\z@                                                       %11
    \vskip\vsize                                                           %12
    \special{beginpaste:}%                                                 %13
    \ht\z@=\z@\dp\z@=\z@\wd\z@=\z@                                         %14
    \noindent\box\z@                                                       %15
    \special{endpaste:}%                                                   %16
    \smash{\vrule height1sp width0sp depth\z@}%                 %17 % 0sp JPFD
    \eject                                                                 %18
  \fi}


% The scratch tokens \toks@@ are already used in AmS-TeX.

\toksdef\toks@@=2


% \rightappend@ is from The TeXbook, page 378.

\long\def\rightappend@#1\to#2{\toks@{\\{#1}}%
  \toks@@=\expandafter{#2}\xdef#2{\the\toks@@\the\toks@}}


% \ifreading@ will be true while still reading the data file; it is simply
% the opposite of \ifeof, but we need an \if... with these reversed values,
% to use within a \loop.

\newif\ifreading@  


% The last line of the data file will produce a \par, so we need to have
% something to test against \par.

\def\Par@{\par}    


% The definition of \paste has the following features:

%1  If \sendout has occurred, we won't allow a \paste to occur.

%2  If a \paste hasn't occurred, we do the following:

%3  We make \ifpaste@ true.

%4  When we read in a data file `file'.dat, we will record all the data
%   in a control sequence \`file'@dat. This will be a list macro, as in 
%   The TeXbook, page 378.

%   To see whether we have read in the data file yet, we just see whether
%   this control sequence, as specified by \csname, is \relax.

%5  If not, we haven't read the file yet, so we immediately open it for
%   reading.

%6  We use \ifeof to test whether the file really exists.

%7  Assuming the file does exist, we do the following.

%8  We are going to temporarily store the data in the control sequence
%   \next@, and at the end \let\`file'@dat=\next@.  We do this because it
%   is rather awkward to continually refer to the control sequence
%   \`file'@dat, which can only be named using \csname.  We begin by
%   setting \next@ to be empty.

%9  We set \ifreading@ to be true (it will be false when we get to the
%   end of the data file).

%10 We read using a \loop.

%11 The \loop needs a test that is true if we are going to keep reading,
%   so we set \ifreading@ false when \ifeof gives true.

%12 If we are still reading the file, we read a line to \next@ii.  

%13 The file has a \par at the end, so \ifx\next@ii\Par@ is true when we
%   are at the last line. 

%14 If that is not the case, then we want to add the data in \next@ii to
%   \next@.  We need \expandafter\rightappend@; otherwise we would just
%   get \next@ii in the token list, rather than the values it now has.

%15 And we just keep doing that until the file is all read.

%16 Then we close the file.

%17 And then we want to \global\let\`file'@dat=\next@.  We need to expand
%   the \csname...\endcsname after a \global\let, which requires the
%   triple \expandafter trick of The TeXbook, page 374.

%18 In any case (i.e., whether or not we first had to read in the data
%   file), we now want to apply the \getdata@ construction, defined
%   below, to \`file'@dat and the second argument #2 of \paste.  This
%   also requires an \expandafter.

%19 \ifgetdata@ will be true if #2 is actually the number of a line in
%   the data file.

%20 In this case, the three pieces of data will be stored in \data@ht,
%   \data@dp, and \data@wd, and we will want to put in a box of that
%   height, depth and width.  The easiest way is to lower a box of that
%   height+depth by the depth, so we first set \dimen@ to that sum.

%21 We make an \hbox containing the special, and then the empty box with 
%   the desired dimensions. NOTE: It is important to put the \special
%   in the \hbox, in case this empty box turns out to be the first
%   thing on the page.  For some reason, \tex\ doesn't position such
%   an empty box at the right place, although it does position anything
%   that will actually appear on the page in the right place; a box
%   with a \special in it is NOT treated as an empty box in this process.

%22 If #2 is not the number of a line in the data file, we just give an
%   error message ``No data for File [<data file>], #[<value of #2>]''
%   In order to have # appear in the error message, rather than ##, we
%   temporarily make # the \lccode of Z, put Z where we want the # to 
%   appear, and then \lowercase the \errmessage.  However, we want to
%   have uppercase N and F in this message, so we have to also set
%   the \lccode of N to N, and of F to F.


\def\paste#1#2{%
  \ifsendout@                                                              %1
    \errmessage{\string\paste\space and
      \expandafter\eat@\string\\sendout not allowed in same file
      (\expandafter\eat@\string\\sendout has already appeared)}%
  \else                                                                    %2
    \global\paste@true                                                     %3
    \expandafter\ifx\csname #1@dat\endcsname\relax                         %4
      \immediate\openin\readdata@=#1.dat                                   %5
      \ifeof\readdata@\errmessage{No file #1.dat}%                         %6
      \else                                                                %7
        \def\next@{}%                                                      %8
        \reading@true                                                      %9
        \loop                                                              %10
          \ifeof\readdata@\reading@false\fi                                %11
          \ifreading@                                                      %12
          \read\readdata@ to\next@ii  
          \ifx\next@ii\Par@\else                                           %13
            \expandafter\rightappend@\next@ii\to\next@\fi                  %14
        \repeat                                                            %15
        \immediate\closein\readdata@                                       %16
        \expandafter\expandafter\expandafter\global\expandafter
          \let\csname#1@dat\endcsname\next@                                %17
      \fi
    \fi
    \expandafter\getdata@\csname#1@dat\endcsname{#2}%                      %18
    \ifgetdata@                                                            %19
      \dimen@=\data@ht\advance\dimen@\data@dp                              %20
      \hbox{\special{dvipaste: #1 #2}%                                     %21
      \lower\data@dp\vbox to\dimen@{\hbox to\data@wd{\hfil}\vfil}}%
    \else                                                                  %22
     {\lccode`\Z=`\#\lccode`\N=`\N\lccode`\F=`\F%
     \lowercase{\errmessage{No data for File [#1], Z#2}}}%
    \fi
  \fi}


% \data@ht, \data@dp, and \data@wd are registers in which \getdata@ will
% store the data gotten.

\newdimen\data@ht
\newdimen\data@dp
\newdimen\data@wd


% We also use a flag \ifgetdata@ to tell whether there was data on the line
% requested.

\newif\ifgetdata@


%  Argument #1 for \getdata@ is a list macro, and #2 a number.

%1 We start by setting the counter \count@ to 0, and \ifgetdata@ to
%  false.

%2 We temporarily (i.e., within a group), define \\ to: (a) advance
%  \count@ by 1 (so that \count@ is k when we are looking at the kth
%  thing on the list); (b) if \count@=#2 (we are at the element of the
%  lists specified by #2), set \ifgetdata@ true (so it is true only if
%  there are at least #2 pieces of data); (c) and then use \getdata@@ to
%  get the data out of this piece.  

%3 And then we apply this \\ to the list.


\def\getdata@#1#2{\count@\z@\getdata@false                                 %1
  {\def\\##1{\advance\count@\@ne\ifnum\count@=#2\relax\global\getdata@true
     \getdata@@##1\getdata@@\fi                                            %2
  }#1}}                                                                    %3


% The elements of the list macro will be of the form

%   [...]pt [...]pt [...]pt

%  with a space after the first and second pt, so we just have \getdata@
%  delimit its first two arguments with spaces.


\def\getdata@@#1 #2 #3\getdata@@{%
  \global\data@ht=#1\relax\global\data@dp=#2\relax\global\data@wd=#3\relax}


% Finally, we return @ to its old \catcode.

\catcode`\@\CCC@