path: root/Master/texmf-dist/source/latex/thalie/thalie.dtx

% \iffalse meta-comment
% Copyright 2010-2019 Louis Paternault
%
% This work may be distributed and/or modified under the
% conditions of the LaTeX Project Public License, either version 1.3
% of this license or (at your option) any later version.
% The latest version of this license is in
%   http://www.latex-project.org/lppl.txt
% and version 1.3 or later is part of all distributions of LaTeX
% version 2005/12/01 or later.
%
% This work has the LPPL maintenance status `maintained'.
% 
% The Current Maintainer of this work is Louis Paternault
%
% This work consists of the files thalie.dtx and thalie.ins
% and the derived file thalie.sty.
% \fi
% 
% \iffalse
%<*driver>
\ProvidesFile{thalie.dtx}
%</driver>
%
%<package>\NeedsTeXFormat{LaTeX2e}
%<package>\ProvidesPackage{thalie}
%<*package>
    [2019/07/31 v0.10b A package to typeset drama plays]
%</package>
%
%<*driver>
\documentclass{ltxdoc}
\EnableCrossrefs
\CodelineIndex
\RecordChanges
\usepackage{array}
\usepackage{enumerate}
\usepackage{multirow}
\usepackage{hyperref}
\usepackage{thalie}
\usepackage{showexpl}
\usepackage{listings}
\usepackage{xcolor}
\usepackage{manfnt}
\lstset{
  language=[LaTeX]TeX,
  numbers=left,
  numberstyle=\tiny,
  backgroundcolor=\color{yellow!20},
  basicstyle=\small\color{black}\ttfamily,
  keywordstyle=\color{blue!80}\sffamily,
  commentstyle=\color{olive},
  stringstyle=\color{red},
}
\usepackage[english]{babel}
\begin{document}
\DocInput{thalie.dtx}
\end{document}
%</driver>
% \fi
% 
% \CheckSum{0}
% \CharacterTable
%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%   Digits        \0\1\2\3\4\5\6\7\8\9
%   Exclamation   \!     Double quote  \"     Hash (number) \#
%   Dollar        \$     Percent       \%     Ampersand     \&
%   Acute accent  \'     Left paren    \(     Right paren   \)
%   Asterisk      \*     Plus          \+     Comma         \,
%   Minus         \-     Point         \.     Solidus       \/
%   Colon         \:     Semicolon     \;     Less than     \<
%   Equals        \=     Greater than  \>     Question mark \?
%   Commercial at \@     Left bracket  \[     Backslash     \\
%   Right bracket \]     Circumflex    \^     Underscore    \_
%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%   Right brace   \}     Tilde         \~}
%
% \GetFileInfo{thalie.dtx}
%
% \DoNotIndex{\@backslashchar, \@ifnextchar, \protect\`}
% \DoNotIndex{\#,\$,\%,\&,\@,\\,\{,\},\^,\_,\~,\ ,\!,\(,\),\,}
% \DoNotIndex{\addcontentsline, \addto, \ae, \AND, \arabic, \abovedisplayshortskip, \abovedisplayskip, \addtolength}
% \DoNotIndex{\begin, \bfseries, \boolean, \baselineskip, \belowdisplayskip, \belowdisplayshortskip, \boolfalse, \booltrue}
% \DoNotIndex{\captionsenglish, \captionsfrench, \center, \centering, \ClassError, \cleardoublepage, \csname, \csundef}
% \DoNotIndex{\def, \defcharcommand@with, \defcharcommand@without, \dimen, \dimexpr}
% \DoNotIndex{\emph, \end, \endcsname, \equal, \expandafter, \endlist, \endmath, \endminipage}
% \DoNotIndex{\framebox, \fi}
% \DoNotIndex{\gappto, \gdef, \global, \GetTranslation}
% \DoNotIndex{\hspace}
% \DoNotIndex{\@ifpackageloaded, \indent, \if@xspace, \ifbool, \ifboolexpr, \ifcsundef, \ifcsdef, \ifdef, \ifdefempty, \ifdefstring, \ifstrempty, \ifstrequal, \ifundef, \ignorespacesafterend, \item}
% \DoNotIndex{\LARGE, \Large, \left, \leftskip, \leftmargin, \list, \linewidth, \LoadDictionaryFor, \LoadDictionary}
% \DoNotIndex{\medskip, \MakeUppercase, \markboth, \markright, \MakeLowercase, \math, \minipage}
% \DoNotIndex{
%   \@actlevel,
%   \@actstyle,
%   \@clearpage,
%   \@cmd,
%   \@definecharactercommand,
%   \@desc,
%   \@displaytitle,
%   \@drama,
%   \@dramatis@clear,
%   \@empty@,
%   \@grouplength,
%   \@groupname,
%   \@interludelevel,
%   \@label,
%   \@maybexspace,
%   \@ne,
%   \@playlevel,
%   \@playstyle,
%   \@scenelevel,
%   \@scenestyle,
%   \@short,
%   \@spaceaftergroup,
%   \@speaks,
%   \@verseadjust,
% }
% \DoNotIndex{\newcommand, \newcounter, \newenvironment, \noindent, \noexpand, \NOT, \newif, \newlength, \newline, \nopagebreak}
% \DoNotIndex{\OR}
% \DoNotIndex{\par, \pgfkeys, \ProcessPgfPackageOptions, \protect, \protected@xappto, \parindent, \parskip, \predisplaysize, \prevgraf, \providebool}
% \DoNotIndex{\quad}
% \DoNotIndex{\refstepcounter, \renewcommand, \RequirePackage, \right, \Roman, \relax, \rightmargin}
% \DoNotIndex{\section, \setboolean, \setlength, \sffamily, \smallskip}
% \DoNotIndex{\tabularnewline, \textrm, \textsc, \textwidth, \thispagestyle, \textbf, \the, \tmp}
% \DoNotIndex{\undef}
% \DoNotIndex{\vspace, \vskip}
% \DoNotIndex{\WithSuffix}
% \DoNotIndex{\xappto, \xspace, \xdef}
% \DoNotIndex{\z@}
%
% \newcommand{\bbackslash}{\symbol{92}}
% \newcommand{\danger}{\marginpar[\hfill\dbend]{\dbend\hfill}}
%
% \title{The \textsf{thalie} package\thanks{
%   This document corresponds to \textsf{thalie}~\fileversion, dated \filedate.
%   Home page, bug requests, etc. at \url{http://framagit.org/spalax/thalie}
%   }\\A package to typeset drama plays}
% \author{Louis Paternault\\ \texttt{spalax+ctan(at)gresille(dot)org}}
%
% \maketitle
%
% \begin{abstract}
% This package is meant to typeset drama plays using \LaTeX{}. It provides
% commands to introduce characters' lines, to render stage direction, to divide
% a play into acts and scenes, to automatically build the dramatis person\ae{},
% etc.
% \end{abstract}
%
% \setcounter{tocdepth}{2}
% \tableofcontents
%
% \section{Introduction}
% This document introduces the \textsf{thalie} package, used to typeset drama
% plays.
%
% \subsection{Other classes and packages}
% This package is far from being the only one that can be used to render drama
% plays. If you do not like my work, you can use one of the following ones (and
% I guess there exists others):
% |drama| \cite{drama},
% |dramatist| \cite{dramatist},
% |play| \cite{play},
% |screenplay| \cite{screenplay},
% |sides| \cite{sides}.
%
% I began to write this package in 2010, and now, at the end of 2012, I must
% admit that I wonder why I started this\ldots There are already several such
% packages in
% \textsc{ctan}\footnote{\url{http://www.ctan.org/topic/drama-script}}, and the
% |dramatist| package seems really nice (I borrowed some ideas and copied some
% code from it). There are actually a few improvements in my package compared
% to |dramatist|: in my package, plays, acts and scenes appear in the table of
% contents; it is possible to include several plays in a single document; there
% are more options when building the dramatis person\ae{}; headers and footers
% are taken into account, etc. But these improvements are small; it might have
% been smarter to contribute to |dramatist| instead of starting my own package.
% The good part is that I have a package that fits my needs, and I learned how
% to write a \LaTeX{} package.
%
% Oh, yes! I know why I started this: I am a geek\ldots
%
% \subsection{License}
% This work may be distributed and/or modified under the
% conditions of the \LaTeX Project Public License, either version 1.3
% of this license or (at your option) any later version.
%
% Further information can be found in the |.dtx| file used to build this
% document.
%
% In short (but this paragraph has no legal value), you can use this package
% freely to render your drama plays, and modify it almost freely. Nevertheless,
% if you like my work, you can invite me to the performance of the play you
% typeset using my package\footnote{You will not take a big risk, since there
% is little chance I travel half the world to see a play. But if by chance I
% can attend it, it would make me really happy.}.
%
% \subsection{Acknowledgements}
% I borrowed ideas and lines of code from the \LaTeX{} packages
% |drama|\cite{drama} and |dramatist|\cite{dramatist}.
%
% I used the following guides to package my package: \emph{How to Package Your
% \LaTeX{} Package} \cite{dtxtut}, and \emph{\LaTeXe{} for class and package
% writers} \cite{clsguide}.
%
% \subsection{Examples}
%
% Most of the examples are taken from Edmond Rostand's \emph{Cyrano de Bergerac}
% \cite{cyrano} or from William Shakespeare's \emph{A Midsummer Night's Dream}
% \cite{midsummer}. The snippets of \emph{Cyrano de Bergerac} are from the
% original (French) version of this play, roughly translated by myself (which
% means that they must be of poor quality).
%
% \subsection{Overview}
% Installation instruction are given in section \ref{sec:install}.
% Documentation about how to use this package is given in section
% \ref{sec:usage}. In particular, section \ref{sec:sectioning} explains how to
% use acts and scenes, sections \ref{sec:dramatis} and \ref{sec:characters} explains how to define
% characters, and use these definitions to introduce characters' lines, and
% section \ref{sec:directions} describes commands used to render stage
% directions. At last, specific instruction about how to use this package with
% a language other than English (or a non-latin alphabet) are given in section
% \ref{sec:i18n}. Examples are given in section \ref{sec:examples}.
%
% Implementation is given in section \ref{sec:implementation}.
%
% \section{Download and Install}
% \label{sec:install}
%
%
% \subsection{\textsc{Gnu}/Linux Distribution}
%
% If applicable, the easiest way to get |thalie| working is by installing it by your distribution package. With Debian (and Ubuntu, and surely other distributions that inherit from Debian), simply run: 
%
% \begin{quote}
% |sudo apt-get install texlive-humanities|
% \end{quote}
%
% \subsection{\LaTeX{} distribution}
%
% This package is included both in \TeX{}Live and MiK\TeX{}. It can be installed by their respective package managers.
%
% \subsection{Manual installation}
%
% \begin{itemize}
% \item Download the lastest archive :
% \begin{description}
% \item[Stable version] \url{http://mirrors.ctan.org/install/macros/latex/contrib/thalie.tds.zip}
% \item[Development version] \url{https://framagit.org/spalax/thalie/repository/archive.zip?ref=master}
% \end{description}
% \item Unzip the archive.
% \item If you got the archive from CTAN (stable version), move file \texttt{tex/latex/thalie/thalie.sty} in a \LaTeX{} path.
% \item If you got the development version, |cd| to the main archive directory, and run |latex thalie.ins| to build |thalie.sty|. Move this file into a \LaTeX{} path.
% \end{itemize}
%
% \section{Usage}
% \label{sec:usage}
%
% \subsection{Localization}
% \changes{v0.9a}{2017/04/22}{Add section \emph{Localization}.}
%
% By default, commands \lstinline|\act|, \lstinline|\scene|, etc. use English words, but they are
% translated to the current language used by |babel| or
% |polyglossia|\footnote{Given that someone provided the translation. Right
% now, the only available languages are English, French, and German.}. More information
% is given in section \ref{sec:l10n}.
%
% \subsection{Package options}
% \label{sec:options}
%
% Package options are summed up in table \ref{table:packageoptions}.
%
% Note that any package option can be redefined anywhere in the document. This
% makes it possible to have several plays collected in a single document, while
% applying different styles or options to each play. See section
% \ref{sec:redefine} for more detail.
%
% \begin{table}
% \centering
% \begin{tabular}{c|c|c}
% Name & Available options & Default \tabularnewline
% \hline
% \hline
% |characterstyle| & |bold| |margin| |center| |simple| |arden| & |simple| \tabularnewline
%                  & |imprimerie-verse| |imprimerie-prose|     &          \tabularnewline
% \hline
% |playstyle| & \multirow{3}{*}{|center| |bigcenter| |box| |custom|} & |box| \tabularnewline
% |actstyle| &  & |bigcenter| \tabularnewline
% |scenestyle| & & |center| \tabularnewline
% \hline
% |playlevel| & \multirow{3}{*}{|part| |chapter| |section| \ldots |subparagraph|} & |chapter| \tabularnewline
% |actlevel| &  & |section| \tabularnewline
% |scenelevel| &  & |subsection| \tabularnewline
% \hline
% |interludelevel| & |play| |act| |scene| & |act| \tabularnewline
% \hline
% |xspace| & |true| |false| & |true|\tabularnewline
% \end{tabular}
% \caption{Package options summary}
% \label{table:packageoptions}
% \end{table}
%
% \subsubsection{Space following character commands}
% \changes{v0.7}{2015/12/28}{New package option \texttt{xspace}.}
% As commands introducing characters' lines and displaying characters' names
% may be frequently used, it might be tempting to omit the following \lstinline|{}| For
% instance, one might prefer to write:
% \iffalse
%<*example>
% \fi
% \begin{lstlisting}
\cyrano Indeed, \cyranoname is my name!
\end{lstlisting}
% \iffalse
%</example>
% \fi
% instead of:
% \iffalse
%<*example>
% \fi
% \begin{lstlisting}
\cyrano{} Indeed, \cyranoname{} is my name!
\end{lstlisting}
% \iffalse
%</example>
% \fi
%
% If package option |xspace| is set (e.g. |xspace=true|), space is automatically
% added after those commands if necessary\footnote{This is done with
% the |$\backslash$xspace| command (from the |xspace| package), hence the name.};
% otherwise, it is not.
%
% For historical reasons, the option |xspace| default is |true|, but this might
% change in some later non-backward compatible version.
%
% \subsubsection{Style}
% The way characters' lines are displayed, as well as play, act and scene
% titles, can be set when loading the options.
% To set character style, use option |characterstyle=|\meta{style}. Available
% styles, and indication to use a custom one, are described in section
% \ref{sec:lines}.
%
% Several play, act and scene title styles are defined. Choose it using options
% |playstyle|=\meta{style}, |actstyle|=\meta{style} and
% |scenestyle|=\meta{style}. Description of available styles, and how to define
% your own one, are described in section \ref{sec:sectionstyles}.
%
% \subsubsection{Sectioning levels}
% If you use a table of contents, or if you also use ``usual'' sectioning
% commands (\lstinline|\chapter|, \lstinline|\section| and so on), the relative importance of
% plays, acts and scenes is important. You can set this using options
% |playlevel=|\meta{level}, |actlevel=|\meta{level} and
% |scenelevel=|\meta{level}. The argument is the name of the corresponding
% sectioning level, i.e. one of |part|, |chapter|, |section|, |subsection|,
% |subsubsection|, |paragraph| and |subparagraph|.
%
% Setting the interlude level is slightly different. While setting it using
% |interludelevel=|\meta{level}, instead of choosing one of \LaTeX{} vanilla
% sectioning levels as the level, you may choose |play|, |act| or |scene|. It
% defines if an interlude is at the same level as a play, an act or a scene.
%
% \subsubsection{Redefining options}
% \label{sec:redefine}
% \DescribeMacro{\setthalieoptions}
%
% Packages options can be reset in the document body using command
% \lstinline|\setthalieoptions|\marg{package options}. Its only argument has the same
% syntax as the package options.
%
% For instance, if you are writing a collections of plays, some in prose, some in verses, you might want to write something like the following.
%
% \iffalse
%<*example>
% \fi
% \begin{lstlisting}
\documentclass{book}
...
\usepackage{thalie}
...
\begin{document}
...
\play{First play}
\setthalieoptions{characterstyle=imprimerie-verse}
...
\play{Second play}
\setthalieoptions{characterstyle=impriemie-prose}
...
\end{document}
\end{lstlisting}
% \iffalse
%</example>
% \fi
%
% \subsection{Sectioning}
% \label{sec:sectioning}
% Here begin the parts explicitly relating to drama.
% \subsubsection{Levels}
% \DescribeMacro{\play}
% \DescribeMacro{\play*}
% \DescribeMacro{\act}
% \DescribeMacro{\act*}
% \DescribeMacro{\scene}
% \DescribeMacro{\scene*}
% To introduce a new play, act or scene, use commands \lstinline|\play|, \lstinline|\act| and
% \lstinline|\scene|. Their behaviour is as close as the ``usual'' sectioning commands
% (\lstinline|\chapter|, \lstinline|\section| and so on) as possible, i.e.:
% \begin{itemize}
% \item Their signature is \lstinline|\play|\oarg{short title}\marg{longtitle} (the
% optional short title is the one used in the table of content, and in headers
% and footers).
% \item A starred version (\lstinline|\play*|, \lstinline|\act*| and \lstinline|\scene*|) is provided, which
% inserts a play (or act, or scene) which is not numbered, and does not insert
% any line in the table of content.
% \item Headers and footers are changed (more information in section \ref{sec:header}).
% \end{itemize}
%
% Both commands \lstinline|\act| and \lstinline|\scene| (and their starred versions) are designed to
% deal with empty titles. Indeed, it is common not to give any name to acts and
% scenes.
%
% By default, a play is as deep (regarding to the table of contents) as a
% chapter, an act as a section, and a scene as a subsection. But this can be
% set using package options |playlevel|, |actlevel| and |scenelevel| (see
% packages options, page \pageref{sec:options}). That way, you can use in your
% document plays, acts and scenes as well as chapters, sections and so on. It
% can be useful if you want a foreword, and appendix, etc.
%
% It is not compulsory to use all three commands \lstinline|\play|, \lstinline|\act| and \lstinline|\scene|.
% The rule of thumb is: if only one element exists, skip the corresponding
% command: if your document has a single play, you should ignore \lstinline|\play|; if
% your document has several single act plays, set
% |playlevel=section,scenelevel=subsection| and ignore \lstinline|\act|; etc.
%
% \DescribeMacro{\interlude}
% \DescribeMacro{\interlude*}
% You may want to use interludes, which are acts or scenes which are not
% numbered, but which should appear in the table of content. Command
% \lstinline|\interlude|\oarg{short title}\marg{long title} has this purpose.
%
% You may choose the sectioning level an interlude is equivalent to in the
% package options. If your interludes are acts, use |interludelevel=act|; if
% they are scenes, use |interludelevel=scene|.
%
% \DescribeMacro{\curtain}
% At last, to mark the end of an act or of the play, you can use command
% \lstinline|\curtain|, which prints the word \lstinline|\GetTranslation{Curtain}| in the middle of its
% own line.
%
% \subsubsection{Title styles}
% \label{sec:sectionstyles}
% Several styles are available to render play, act and scene titles. Choose
% them using package options |playstyle|, |actstyle| and |scenestyle|. Default
% is |playstyle=box|, |actstyle=bigcenter|, |scenestyle=center|.
%
% \paragraph{Custom titles}
% Unfortunately, as play, act and scene titles are not considered (by \LaTeX{})
% as usual sections, package
% |titlesec|\footnote{\url{http://www.ctan.org/pkg/titlesec}} cannot be used to
% use alternative section titles. Here is the way to set your own one.
%
% \begin{figure}[p]
% \centering
% \iffalse
%<*example>
% \fi
% \begin{lstlisting}
\newcommand\customact[2]{
  \begin{center}
    \textsc{\GetTranslation{Act} #1}

    #2
  \end{center}
}
\WithSuffix\newcommand\customact*[1]{
  \begin{center}
    #1
  \end{center}
}
\end{lstlisting}
% \iffalse
%</example>
% \fi
% \caption{Example of custom act definition}
% \label{fig:custom}
% \end{figure}
%
% \DescribeMacro{\customplay}
% \DescribeMacro{\customact}
% \DescribeMacro{\customscene}
% When loading the package, use |custom| as the style of the title you want to
% customize (e.g. |actstyle=custom|). Then, commands
% \lstinline|\customact|\marg{counter}\marg{title} and \lstinline|\customact*|\marg{title} will be
% called by this package to render titles. You \emph{must} define them. Figure
% \ref{fig:custom} gives the example of the definition of the |center| style.
%
% The first argument of \lstinline|\customact| is the label of the act being printed
% (that is, \lstinline|\theact| for an act, \lstinline|\theplay| for a play, etc.), its second
% argument is its title. Command \lstinline|\customact*| only has one argument, which is
% the act title.
% 
% \subsubsection{Labels and counters}
%
% \DescribeMacro{\theplay}
% \DescribeMacro{\theact}
% \DescribeMacro{\thescene}
% Using the same tools as \lstinline|\chapter|, \lstinline|\section| and so on, it is possible to
% define the way counters of plays, acts and scenes are displayed. You can do
% this by redefining \lstinline|\theplay|, \lstinline|\theact| and \lstinline|\thescene|. For example, to
% have acts numbered using letters, use \lstinline|\renewcommand{\theact}{\Alph{act}}|.
%
% \subsubsection{Headers and footers}
% \label{sec:header}
%
% \DescribeMacro{\playmark}
% \DescribeMacro{\actmark}
% \DescribeMacro{\scenemark}
% Once again, similar tools as those used by \lstinline|\section| are provided to deal
% with headers and footers. When introducing, a new play, act or % scene,
% respectively, commands \lstinline|\playmark|\marg{label}, \lstinline|\actmark|\marg{label} and
% \lstinline|\scenemark|\marg{label} are called, so that titles can be used in headers
% and footers. If the default behaviour does not suit you (which should be the
% case if you did not choose the default option for |playlevel|, |actlevel| or
% |scenelevel|), you can redefine them.
%
% Examples are given in section \ref{sec:examples:headers}.
%
% \subsection{Dramatis person\ae}
% \label{sec:dramatis}
% This part explains how to build and display the dramatis person\ae{}.
%
% Definition of characters is done in document body.
% As it is possible to have several plays in a single documents (for a
% collection of plays or sketches), it is possible to define several
% dramatis person\ae{}. A new one disables the character commands
% defined by the previous one.
%
% \DescribeEnv{dramatis}
% Definition of characters is done inside the |dramatis| environment. If the
% |hidden| option is given, the dramatis person\ae{} is not printed (its
% only purpose is then to define the character commands).
%
% \begin{quote}
%   \lstinline|\begin{dramatis}|\oarg{hidden}
% \end{quote}
%
% Then, several commands are available to define characters, and organize
% character definitions.
%
% \DescribeMacro{\characterspace}
% Command \lstinline|\characterspace| put some vertical space into the dramatis
% person\ae{}.
%
% \subsubsection{Character definition}
% \paragraph{Basic definition}
% \label{paragraph:basiccharacter}
% 
% \begin{figure}[p]
% \centering
% \iffalse
%<*example>
% \fi
% \begin{LTXexample}[pos=b]
\begin{dramatis}
  \character[cmd={cyrano}, drama={Cyrano de Bergerac}]{Cyrano}
  \character[cmd={lebret}]{Le Bret}
  \character[cmd={bellerose}]{Bellerose}
\end{dramatis}

\bigskip

\lebret[to \cyranoname, holding his arm]
Let's talk !

\cyrano
Wait for the crowd to leave.  \did{To \bellerosename} Can I stay?
% \end{LTXexample}
% \iffalse
%</example>
% \fi
% \caption{Example of character definition}
% \label{fig:character_example}
% \end{figure}
%
% \DescribeMacro{\character}
% To define a character, use command \lstinline|\character|.
% \begin{quote}%
% \lstinline|\character|\oarg{\emph{cmd=}command,\emph{drama=}dramatis,\emph{desc=}description}\marg{name}%
% \end{quote}
% The mandatory argument is the name of the character, as it will appear in each of this character's line. It is later possible to redefine it using command \lstinline|\setcharactername| (see part \ref{setcharactername}). Optional arguments are:
% \begin{description}
% \item[desc] is a description of your character, appearing in the dramatis person\ae{};
% \item[cmd] is the name of the command that will be used to introduce this character's lines in the remaining part of your document;
% \item[drama] is the name of your character, as it will appear in the dramatis person\ae{}. The name of the character (mandatory argument) is used as a default value.
% \end{description}
%
% If \emph{cmd} is defined, this command creates two new commands: |\|\meta{cmd}
% and |\|\meta{cmd}|name|. The
% first one is used to introduce a character's line. The second one prints the
% character's name. An error is raised if a command with any of these two names
% already exists.
%
% An example of the use of this command is given in figure
% \ref{fig:character_example}.
%
% \paragraph{Special character definition}
%
% Although optional arguments are not mandatory, not defining them, or leaving the mandatory argument blank, have special meaning.  The combination are summed up in table \ref{table:character}.
%
% \begin{table}
%   \centering
%   \begin{tabular}{cc||c|c|c|c|}
%     \multicolumn{2}{c||}{}                            &     \multicolumn{2}{c|}{empty \meta{name}} & \multicolumn{2}{c|}{\meta{name}} \\
%     \multicolumn{2}{c||}{}                            & no \meta{cmd}                 & \meta{cmd} & no \meta{cmd}               & \meta{cmd} \\
%     \hline
%     \hline
%     \multirow{4}{*}{no \meta{drama}} & \multirow{2}{*}{no \meta{desc}} &                               &                          & silent\textsuperscript{\ref{character:silent}}    & default\textsuperscript{\ref{character:default}} \\
%                                      &                &                               &                          &                                    & hidden\textsuperscript{\ref{character:hidden}}\\
%     \cline{2-6}
%                                      & \multirow{2}{*}{   \meta{desc}} & description                        &                          & silent\textsuperscript{\ref{character:silent}}    & default\textsuperscript{\ref{character:default}} \\
%                                      &                & only\textsuperscript{\ref{character:description}} &                          &                                    &                                   \\
%     \hline
%     \multirow{2}{*}{   \meta{drama}} & no \meta{desc} & silent\textsuperscript{\ref{character:silent}}      &                          &                             & default\textsuperscript{\ref{character:default}} \\
%     \cline{2-6}
%                                      &    \meta{desc} & silent\textsuperscript{\ref{character:silent}}      &                          &                             & default\textsuperscript{\ref{character:default}} \\
%     \hline
%   \end{tabular}
%
%   An empty cell means that the corresponding combination is forbidden. The superscript number refers to the list of special character definitions (page \pageref{specialcharaclist}).
%   \caption{(Not) defining arguments in character definition}
%   \label{table:character}
% \end{table}
%
% \label{specialcharaclist}
% \begin{enumerate}[(i)]
% \item \label{character:default} \textbf{Default definition (\meta{name} and \meta{cmd} are given; \meta{desc} and \meta{drama} may be omitted):} The character is defined as described in \ref{paragraph:basiccharacter}. If \meta{description} is omitted, no description appear in the dramatis person\ae{}; if no \meta{drama} is given, character in the dramatis person\ae{} has the same name as it will have in the document.
% Example:
% \iffalse
%<*example>
% \fi
% \begin{lstlisting}
\character[
  drama={A ghost},
  desc={the king's ghost},
  cmd={ghost},
  ]{The ghost}
\end{lstlisting}
% \iffalse
%</example>
% \fi
% \item \label{character:description} \textbf{Description only (everything omitted but \meta{desc}):} A description is inserted in the dramatis person\ae{}. Useful to add characters such as \emph{The kings' armies}.
% Example:
% \iffalse
%<*example>
% \fi
% \begin{lstlisting}
\character[desc={The kings' armies}]{}
\end{lstlisting}
% \iffalse
%</example>
% \fi
% \item \label{character:hidden} \textbf{Hidden character (\meta{drama} is empty (defined, but empty), \meta{cmd} and \meta{name} are defined, \meta{desc} is omitted)} Definition of a character that does not appear in the dramatis person\ae{}.
% Example:
% \iffalse
%<*example>
% \fi
% \begin{lstlisting}
\character[drama={}, cmd={postman}]{The postman}
\end{lstlisting}
% \iffalse
%</example>
% \fi
% \item \label{character:silent} \textbf{Silent character (one of \meta{name} or \meta{drama} is defined; \meta{desc} may be omitted; \meta{cmd} is omitted):} The character only appear in the dramatis person\ae{}. It will not be used elsewhere in the document. An optional description may also appear in the dramatis person\ae{}.
% Example:
% \iffalse
%<*example>
% \fi
% \begin{lstlisting}
\character{A priest}
\end{lstlisting}
% \iffalse
%</example>
% \fi
% \end{enumerate}
%
% \paragraph{Group of characters}
% \DescribeEnv{charactergroup}
% It is possible to group several characters' definition if they have the same
% description. This is done with environment
% |charactergroup|\oarg{width}\marg{description}. The optional argument sets
% the group width (on the left of the brace).
% See an example on figure \ref{fig:charactergroup}.
% 
% \begin{figure}[p]
% \centering
% \iffalse
%<*example>
% \fi
% \begin{LTXexample}[pos=b]
\begin{dramatis}
\begin{charactergroup}[2.5cm]{Officers}
  \character[desc={a soldier}]{Marcellus}
  \character[desc={a soldier}]{Bernardo}
\end{charactergroup}
\end{dramatis}
% \end{LTXexample}
% \iffalse
%</example>
% \fi
% \caption[Defining a group of characters]{Defining a group of characters}
% \label{fig:charactergroup}
% \end{figure}
%
% The effect of this code will be, in the dramatis person\ae{}, to have a
% nice brace mapping the three characters to their common description.
%
% The behaviour of nested |charactergroup| environments is
% undefined\footnote{It might work; it might not. It might work now, but stop
% working in the future; it might not work now, but work by accident in the
% future. Etc.}.
%
% \subsubsection{Customize style of dramatis person\ae}
% \DescribeEnv{dramatisenv}
% \DescribeMacro{\dramatischaracter}
% \DescribeMacro{\dramatischaractername}
% \DescribeMacro{\dramatischaracterdescription}
%
% A default style is used to display the dramatis person\ae, but is it made to
% be customized.
% The following commands can be redefined to make dramatis person\ae look
% different. They do nothing apart from displaying text (no internal
% definition, etc.).
%
% \begin{itemize}
% \item |dramatisenv|: This environment wraps the dramatis person\ae.
% \item \lstinline|\dramatischaracter|\marg{name}\marg{description} Renders the character name and description. It should take care of cases where name or descsription (but not both) is missing.
% \item \lstinline|\dramatischaractername|\marg{name} Renders the character name.
% \item \lstinline|\dramatischaracterdescription|\marg{description} Renders the character description.
% \item Environment |charactergroup|\oarg{width}\marg{description} Renders a group of characters.
% \item \lstinline|\characterspace| Adds a vertical character space.
% \end{itemize}

% Figure \ref{fig:dramatisconversion} illustrates how those commands are used.
%
% \begin{figure}[p]
% \iffalse
%<*example>
% \fi
\begin{lstlisting}
\begin{dramatis}
  \character{The queen}
  \character[desc={the queen's husband.}]{The king}
  \begin{charactergroup}{Lords and ladies}
    \character{Lord Foo}
    \character[desc={Lord Foo's sister.}]{Lady Bar}
    \character[desc={Lord and Lady Baz.}]{}
  \end{charactergroup}
  \characterspace
  \character[desc={Several servants}]{}
\end{dramatis}
\end{lstlisting}
% \iffalse
%</example>
% \fi
%
% To display the dramatis person\ae{} above, the commands below are called.
%
% \iffalse
%<*example>
% \fi
\begin{lstlisting}
\begin{dramatisenv}
  \dramatischaracter{The queen}{}
  \dramatischaracter{The king}{the queen's husband.}
  \begin{charactergroup}{Lords and ladies}
    \dramatischaracter{Lord Foo}{}
    \dramatischaracter{Lady Bar}{Lord Foo's sister.}
    \dramatischaracter{}{Lord and Lady Baz.}
  \end{charactergroup}
  \characterspace
  \dramatischaracter{}{Several servants}
\end{dramatisenv}
\end{lstlisting}
% \iffalse
%</example>
% \fi
%
% And command \lstinline|\dramatischaracter|\marg{Name}\marg{Description} is defined as something like the following code (excepted that parts taking care of cases where there is no character name or description is omitted here).
% \iffalse
%<*example>
% \fi
\begin{lstlisting}
\newcommand{\dramatischaracter}[2]{ %
  \dramatischaractername{#1}, \dramatischaracterdescription{#2}\\
}
\end{lstlisting}
% \iffalse
%</example>
% \fi
% \caption{Commands used to display the dramatis person\ae.}
% \label{fig:dramatisconversion}
% \end{figure}
%
% For example, to render character names in small caps, one would define :
%
% \iffalse
%<*example>
% \fi
\begin{lstlisting}[numbers=none]
\renewcommand{\dramatischaractername}[1]{\textsc{#1}}
\end{lstlisting}
% \iffalse
%</example>
% \fi
%
% Or to make dramatis
% person\ae{} include a title, one can define :
% \iffalse
%<*example>
% \fi
\begin{lstlisting}[numbers=none]
\renewenvironment{dramatisenv}{%
  \list{}{\rightmargin1cm\leftmargin2cm}\item[]
  \act*{Dramatis person\ae}%
}{%
  \endlist%
}
\end{lstlisting}
% \iffalse
%</example>
% \fi
%
% \subsection{Characters}
% \label{sec:characters}
% This part explains how to define characters, and introduce character's lines.
%
% It has been explained that definition of a character in the dramatis
% person\ae{} (previous subsection) also creates commands used to introduce
% lines of characters. For instance, defining a character using
% \lstinline|\character[cmd=cyrano]{Cyrano}| means than Cyrano's lines can now be
% introduced using the following code.
% \iffalse
%<*example>
% \fi
\begin{lstlisting}
\cyrano
No! It's a bit short, young man\ldots
\end{lstlisting}
% \iffalse
%</example>
% \fi
% This would display the name \emph{Cyrano} using the current character style, then
% his line.
%
% \subsubsection{Custom characters}
%
% \paragraph{Disposable character}
% \DescribeMacro{\disposablecharacter}
% One can need to define characters that are used only once (or a few times).
% Command \lstinline|\disposablecharacter| is here to help.
% \begin{quote}\lstinline|\disposablecharacter|\oarg{directions}\marg{name}\end{quote}
% This command, used in the body, introduces a line for character |name|, with optional stage
% directions. It is rendered the same way regular characters are rendered, but
% nothing is added to the dramatis person\ae{}. It is used in figure
% \ref{fig:setcharactername_example}.
%
% This command is also useful to introduce lines of characters in non standard
% ways, for instance if several characters speak at once. See examples in
% section \ref{sec:examples:characterslines}.
%
% \subsubsection{Changing character's name}
% \label{setcharactername}
% \DescribeMacro{\setcharactername}
%
% \begin{figure}[p]
% On the first scenes of Cyrano de Bergerac, the main character (Cyrano) is
% somewhere in a crowd, and only appears as \emph{a voice}. He appears as
% Cyrano in the following verses.
%
% \centering
% \iffalse
%<*example>
% \fi
% \begin{LTXexample}[pos=b]
\begin{dramatis}[hidden]
  \character[desc={Cyrano de Bergerac}, cmd=cyrano]{The voice}
  \character[cmd=montfleury]{Montfleury}
\end{dramatis}

\cyrano Leave!

\disposablecharacter{The crowd} Oh!

\montfleury[losing his voice] ``Happy he who far away from court\ldots''

\setcharactername{cyrano}{Cyrano}

\cyrano[emerging from the crowd, standing up on a chair {[}\ldots{]} with
    a terrible nose] Ah! I am getting angry!\ldots
% \end{LTXexample}
% \iffalse
%</example>
% \fi
% \caption{Example of changing the name of a character}
% \label{fig:setcharactername_example}
% \end{figure}
%
% It is possible to change the name that appears to introduce character's lines
% within the text. This can be used, for example, when a character is first
% refered to as \emph{A voice}, until we learn his real identity, which is
% \emph{Cyrano}. An example is given in figure
% \ref{fig:setcharactername_example}.
% \begin{quote}\lstinline|\setcharactername|\marg{command}\marg{name}\end{quote}
%
% This command takes two mandatory arguments. The first one, |command|, is the
% command used to introduce this character's line. The second one is the name
% to display for this character.
%
% \subsubsection{Lines}
% \label{sec:lines}
% To introduce characters' lines, use the commands defined in the character
% definition (see the \lstinline|\character| command, or the example in figure
% \ref{fig:character_example}).
%
% \paragraph{Choose style}
% \changes{v0.6}{2014/06/25}{New character styles \texttt{imprimerie-verse}, \texttt{imprimerie-prose} and \texttt{arden}.}
% Several styles are available, to typeset character's name and lines in
% different ways. Change the style by loading package using option
% |characterstyle=|\marg{style} (available styles are |bold|, |center|,
% |margin|, |simple|, |imprimerie-verse|, |imprimerie-prose|). A few notes:
% \begin{itemize}
% \item Default style is |simple|.
% \item |imprimerie-verse| and |imprimerie-prose| styles are French
% \emph{de facto} standards for typesetting drama plays, respectively in verse
% and in prose, as defined by the \emph{Imprimerie nationale}
% \cite{imprimerienationale}.
% \item |arden| tries to mimick typesetting of the Arden Shakespeare series.
% \item |bold| needs a sans serif font to be defined (it should be done by
% default with latin alphabets, but must be done by hand with languages using
% non latin characters (greek, hindi, etc.)).
% \end{itemize}
%
% \paragraph{Customize style}
% \DescribeMacro{\speakswithoutdirection}
% \DescribeMacro{\speakswithdirection}
% If available styles does not fit your need, you can also define your own one.
% To do so, you can redefine the following commands.
% \begin{quote}
% \lstinline|\speakswithoutdirection|\marg{name}\\
% \lstinline|\speakswithdirection|\marg{name}\marg{direction}
% \end{quote}
% The first one (\lstinline|\speakswithoutdirection|) is invoked to display a character's name
% to introduce its line. It takes one argument, which is the character's line.
% The second one (\lstinline|\speakswithdirection|) is also invoked to display a character's
% name to introduce its line, but it takes a second argument, which is stage
% directions to be printed together with character's name.
%
% See also section \ref{sec:directions} to see other ways to print stage
% directions.
%
% \subsection{Stage directions}
% \label{sec:directions}
% Let us begin with a warning: since we could not figure out a nice command
% name made from ``stage directions'', we used the French word
% \emph{(didascalie)} to build up command names.
%
% \DescribeMacro{\did}
% \DescribeEnv{dida}
% We define two ways to render stage directions: a short one, that is printed
% inline, and a long one, printed in its own paragraph. They act a bit like
% \lstinline|$\formula$| and \lstinline|\[\formula\]| for formulas.
% The first way is the command \lstinline|\did|\marg{directions}. The second way is the
% environment |dida|.
%
% \DescribeMacro{\onstage}
% Some stage directions are displayed centered under the scene or act
% definition (I often see it in classical drama, where the list of characters
% appearing in each scene is displayed that way). Command
% \lstinline|\onstage|\marg{directions} can be used to display such information.
%
% \DescribeMacro{\pause}
% As we often need to mark pauses in theater, we created the command \lstinline|\pause|,
% which is a shortcut for \lstinline|\did{\GetTranslation{Pause}}|.
%
% \subsection{Splitting verses}
%
% When writing verses, it is sometimes useful to split a verse between two
% characters: the first character starts it in its line, and the second one
% finishes it in a second line. Visually, the start of the second line is
% vertically aligned to the end of the first line.
%
% \begin{figure}[p]
% \centering
% \iffalse
%<*example>
% \fi
% \begin{dramatis}[hidden]
%   \character[cmd={hermia}]{Hermia}
%   \character[cmd={theseus}]{Theseus}
% \end{dramatis}
% \begin{LTXexample}[pos=b]
\adjustverse{-7em}

\hermia
So is Lysander.\pauseverse

\theseus
\resumeverse In himself he is.
% \end{LTXexample}
% \iffalse
%</example>
% \fi
% \caption{Example of commands to split verse}
% \label{fig:splitverse}
% \end{figure}
%
% \begin{figure}[p]
% \centering
% \iffalse
%<*example>
% \fi
% \begin{dramatis}[hidden]
%   \character[cmd={hermia}]{Hermia}
%   \character[cmd={theseus}]{Theseus}
% \end{dramatis}
% \begin{LTXexample}[pos=b]
\hermia
So is Lysander.

\theseus
\phantom{So is Lysander.} In himself he is.
% \end{LTXexample}
% \iffalse
%</example>
% \fi
% \caption{Example of commands to split verse (using the \texttt{\bbackslash{}phantom} command)}
% \label{fig:splitverse-phantom}
% \end{figure}
%
% \danger
% Warning: I do not understand the code behind this feature. I copied-pasted code by David Carlisle\footnote{Originally written as an answer to a StackExchange question: see \url{https://tex.stackexchange.com/a/107727}.} without understanding it. There are probably bugs, but I won't be able to solve them.
% This feature can also be implemented using the \lstinline|\phantom| command (see figure \ref{fig:splitverse-phantom} for an example, page \pageref{fig:splitverse-phantom}).
% It is far less user-friendly, but it also less error prone. Choose wisely…
%
% \DescribeMacro{\pauseverse}
% \DescribeMacro{\resumeverse}
% \DescribeMacro{\adjustverse}
%
% Command \lstinline|\pauseverse|  is used at the end of the verse to be continued,
% while command \lstinline|\resumeverse| is used at the beginning of the continuing
% verse.
% Let us face it: these commands are kind of a hack, and sometimes, the lines
% are not aligned the way one would expect them to. To correct this, command
% \lstinline|\adjustverse|\marg{length} can be used to add an extra (possibly negative)
% space when calling \lstinline|\resumeverse|, to get a correct alignment.
% See figure \ref{fig:splitverse}, page \pageref{fig:splitverse}, for an
% example of those three commands.
%
% When writing a play in verse, one can use a lot of those commands, which can
% be tedious because of their long names. So, defining ``shortcuts'' of those
% commands can be handy, as in the following example.
%
% \iffalse
%<*example>
% \fi
% \begin{lstlisting}
\newcommand{\pv}{\pauseverse}
\newcommand{\rv}{\resumeverse}
\end{lstlisting}
% \iffalse
%</example>
% \fi
%
% This is not done by default, because short command names are a scare ressource
% in \LaTeX, so, defining these commands by default might conflict with other
% packages, while most of |thalie| users will not use them.
%
% \section{Localization and Internationalization}
% \label{sec:i18n}
%
% \subsection{Localization}
% \label{sec:l10n}
%
% \changes{v0.9a}{2017/04/22}{Use package |translations| for localization.}
%
% Language cannot be defined directly in this package. Instead, the language
% currently used by |babel| or |polyglossia| is used to translate the following
% words (with or without capital letter, singular or plural): \emph{play},
% \emph{act}, \emph{scene}, \emph{interlude}, \emph{pause}, \emph{curtain}.
%
% If the option for your language does not exist\footnote{You can also send me
% the translation for your language, to improve this package.}, or if you want
% to change the default words used here, you can set your own translation
% using command \lstinline|\DeclareTranslation| (see the |translations| package for more
% information). For instance use
% \lstinline|\DeclareTranslation{Spanish}{Curtain}{Tel\`on}| for Spanish\footnote{I may
% be wrong: I cannot speak Spanish.}.
%
% See section \ref{sec:languages} for the list of supported languages.
%
% \subsubsection{Common translations}
% \DescribeMacro{\playname}
% \DescribeMacro{\actname}
% \DescribeMacro{\scenename}
% \DescribeMacro{\interludename}
% \DescribeMacro{\pausename}
% \DescribeMacro{\curtainname}
%
% Commands defined here are shorter versions of strings commonly translated.
%
% For instance, \lstinline|\playname| is a shortcut for \lstinline|\GetTranslation{Play}|,
% \lstinline|\actname| is a shortcut for \lstinline|\GetTranslation{Act}|, and so on.
%
% \subsection{Non-latin alphabets}
%
% This package should work with languages using non-latin alphabets (greek,
% hindi, etc.). However, here are a few remarks.
%
% \begin{itemize}
% \item The |bold| character style (see section \ref{sec:lines}) can only be used if a sans serif font has been defined. For instance, for hindi, you might write in the preamble: \lstinline|\newfontfamily\hindifontsf{Noto Sans Devanagari}|.
% \end{itemize}
%
% \subsection{Language specific comments}
% \label{sec:languages}
%
% \changes{v0.10a}{2019/02/24}{New translation: German (thanks Ekkart Kleinod).}
%
% The following languages are available:
%
% \begin{itemize}
% \item English,
% \item French,
% \item German.
% \end{itemize}
%
% \subsubsection{English}
%
% \begin{itemize}
% \item The |arden| character style tries to mimick the typestting of the Arden Shakespeare series.
% \end{itemize}
%
% \subsubsection{French}
%
% \begin{itemize}
% \item The |imprimerie-verse| and |imprimerie-prose| character styles implements the French \emph{de facto} standards for typesetting drama plays, respectively in verse and in prose, as defined by the \emph{Imprimerie nationale} \cite{imprimerienationale}.
% \item The same book (\cite{imprimerienationale}) states that act numbers should be typeset in capital roman numerals (which is done by default with |thalie|), and that scene numbers should be typeset in small capital roman numerals, which is \emph{not} the default, but can be achieved by adding the following line in the preamble: \lstinline|\renewcommand{\thescene}{\textsc{\roman{scene}}}|.
% \end{itemize}
%
% \subsubsection{Other languages}
%
% I do not know anything related to other languages. If you have interesting advice for those languages that you would like to share (preferably with a reference to a reliable source), I would be happy to add them to this list!
%
% \section{Examples}
% \label{sec:examples}
% \changes{v0.9a}{2017/04/22}{Add section \emph{Examples}.}
%
% \subsection{Characters' lines}
% \label{sec:examples:characterslines}
%
% \subsubsection{Introduce lines of several characters at the same time.}
%
% Since \lstinline|\disposablecharacter| can display arbitrary text using the style of
% character names, it can be used to render a custom text when two characters
% are speaking together.
%
% \iffalse
%<*example>
% \fi
% \begin{LTXexample}[pos=b, preset={
\begin{dramatis}[hidden]
  \character[cmd=alice]{Alice}
  \character[cmd=bob]{Bob}
  \character[cmd=eve]{Eve}
\end{dramatis}
}]
\alice
Let's open it.

\disposablecharacter{\bobname and \evename}
No!
% \end{LTXexample}
% \iffalse
%</example>
% \fi
%
% \subsubsection{Add a footnote on a character name}
%
% Adding a footnote on the character name introducing its line cannot be done on the character command defined by the dramatis person\ae. Instead, the \lstinline|\disposablecharacter| command can be used instead.
% \iffalse
%<*example>
% \fi
% \begin{lstlisting}
\disposablecharacter{\alicename\footnote{An interesting note.}}
Hello, world!
\end{lstlisting}
% \iffalse
%</example>
% \fi
%
% \subsubsection{Add a footnote in a stage direction}
%
% Footnote must be protected to be included in stage directions.
% \iffalse
%<*example>
% \fi
% \begin{lstlisting}
\cyrano[clapping his hands\protect\footnote{An interesting footnote.}]
One!
\end{lstlisting}
% \iffalse
%</example>
% \fi
%
% \subsection{Headers and footers}
% \label{sec:examples:headers}
%
% By default, with the |article| class, the header of the left page contains
% the play name, and the header of the right page contains the act number.
%
% \subsubsection{Act number on left, scene number on right}
%
% \iffalse
%<*example>
% \fi
% \begin{lstlisting}
\renewcommand{\actmark}[1]{%
  {\markboth{\MakeUppercase{\GetTranslation{Act}}\ \theact\ #1}{}}%
}
\renewcommand{\scenemark}[1]{%
  {\markright{\MakeUppercase{\GetTranslation{Scene}}\ \thescene\ #1}}%
}
\end{lstlisting}
% \iffalse
%</example>
% \fi
%
% \subsubsection{Play name of left, act and scene name on right}
%
% \iffalse
%<*example>
% \fi
% \begin{lstlisting}
\usepackage{fancyhdr}
\pagestyle{fancy}
\fancyhf{}
\fancyhead[RO]{%
  \textit{\MakeUppercase{%
    \GetTranslation{Act} \theact{}, %
    \GetTranslation{Scene} \thescene%
  }}%
}
\fancyhead[LE]{\leftmark}
\end{lstlisting}
% \iffalse
%</example>
% \fi
%
% \section{Implementation}
% \label{sec:implementation}
%
% \subsection{Required packages}
% Loading some packages.
%    \begin{macrocode}
% Options
\RequirePackage{pgfkeys}
% Chapters, sections, etc
\RequirePackage{etoolbox}
\RequirePackage{suffix}
% Dramatis person\ae{} is written using a table.
\RequirePackage{tabularx}
% Handling spaces after having introduced characters' lines.
\RequirePackage{xspace}
%    \end{macrocode}
%
% \subsection{Localization}
%
% Use |translations|. Translations are defined in the |dicts/thalie-<LANGUAGE>.trsl| files.
%    \begin{macrocode}
\RequirePackage{translations}
\LoadDictionary{thalie}
\LoadDictionaryFor{fallback}{thalie}
%    \end{macrocode}
%
% \subsection{Obsolete localization commands}
%
% \begin{macro}{\playname}
% \begin{macro}{\actname}
% \begin{macro}{\scenename}
% \begin{macro}{\interludename}
% \begin{macro}{\curtainname}
% \begin{macro}{\pausename}
% Shorter versions of commonly translated strings.
%    \begin{macrocode}
\newcommand{\playname}{\GetTranslation{Play}}
\newcommand{\actname}{\GetTranslation{Act}}
\newcommand{\scenename}{\GetTranslation{Scene}}
\newcommand{\interludename}{\GetTranslation{Interlude}}
\newcommand{\curtainname}{\GetTranslation{Curtain}}
\newcommand{\pausename}{\GetTranslation{Pause}}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \subsection{Sectioning}
% \subsubsection{Headears, footers, counters, etc.}
% \begin{macro}{playmark}
% \begin{macro}{actmark}
% \begin{macro}{scenemark}
% Define commands \lstinline|\playmark|, \lstinline|\actmark| and \lstinline|\scenemark|, which are involved
% in headers and footers definition.
%    \begin{macrocode}
\newcommand{\playmark}[1]{%
  \markboth{\MakeUppercase{#1}}{}%
}
\newcommand{\actmark}[1]{%
  \markright{\MakeUppercase{%
    \GetTranslation{Act}\ \theact%
    \ifdefempty{#1}{}{: #1}%
  }}%
}
\newcommand{\scenemark}[1]{%
}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% 
% \begin{macro}{theplay}
% \begin{macro}{theact}
% \begin{macro}{thescene}
% Defines counters for plays, acts and scenes, and the associated labels
% (\lstinline|\theplay|, \lstinline|\theact|, \lstinline|\thescene|).
%    \begin{macrocode}
\newcounter{play}
\renewcommand{\theplay}{\arabic{play}}
\newcounter{act}[play]
\renewcommand{\theact}{\Roman{act}}
\newcounter{scene}[act]
\renewcommand{\thescene}{\arabic{scene}}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
% 
% \subsubsection{Styles}
% Style difinition. Command \lstinline|\@displaytitle| is later used by commands
% \lstinline|\play|, \lstinline|\act| and \lstinline|\scene| (and their starred version) to typeset the
% title.
%    \begin{macrocode}
\newcommand{\@displaytitle}[3]{
  % Arguments:
  % - Style
  % - Label (none = not in toc)
  % - Title
  \ifdefstring{#1}{center}{
    \begin{center}
      \textsc{#2}

      #3
    \end{center}
  }{\ifdefstring{#1}{bigcenter}{
    \begin{center}
      \Large
      \textsc{#2}

      #3
    \end{center}
  }{\ifdefstring{#1}{box}{
    \begin{center}
      \framebox{\begin{minipage}{0.7\textwidth}
      \begin{center}
        \Large \bfseries
      \vspace{0.5em}

      #2
      \ifboolexpr{test{\ifstrempty{#3}} or test{\ifstrempty{#2}}}{}{---}
      #3

      \vspace{0.5em}
    \end{center}
    \end{minipage}}
    \end{center}
    \vspace{1em}
  }{}}}
}
%    \end{macrocode}
% 
% \subsubsection{Sectioning commands}
% 
% Some general commands to handle clearing pages, and table of contents.
%    \begin{macrocode}
\newcommand\@clearpage[1]{%
  % Clear page if necessary
  \ifboolexpr{test{\ifdefstring{#1}{part}} or test{\ifdefstring{#1}{chapter}}}{
    \cleardoublepage
    \thispagestyle{empty}
  }{}
}

%    \end{macrocode}
% 
% \begin{macro}{\play}
% \begin{macro}{\play*}
% Define sectioning commands to introduce plays. As for \lstinline|\section| (and
% other) sectioning command, the starred version does the same, excepted that
% nothing is written in the table of content.
%    \begin{macrocode}
\newcommand{\play}[2][]{%
  \refstepcounter{play}
  \ifstrempty{#1}{
    \def\@short{#2}
  }{
    \def\@short{#1}
  }
  \@clearpage{\@playlevel}
  \playmark{\@short}
  \addcontentsline{toc}{\@playlevel}{\@short}
  \ifdefstring{\@playstyle}{custom}{
    \customplay{\theplay}{#2}
  }{
    \@displaytitle{\@playstyle}{}{#2}
  }
}
\WithSuffix\newcommand\play*[1]{%
  \@clearpage{\@playlevel}
  \ifdefstring{\@playstyle}{custom}{
    \customplay*{#1}
  }{
    \@displaytitle{\@playstyle}{}{#1}
  }
}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% 
% \begin{macro}{\act}
% \begin{macro}{\act*}
% Define commands to introduce acts.
%    \begin{macrocode}
\newcommand{\act}[2][]{%
  \refstepcounter{act}
  \ifstrempty{#1}{
    \def\@short{#2}
  }{
    \def\@short{#1}
  }
  \ifdefempty{\@short}{
    \def\@label{\GetTranslation{Act} \theact{}}
  }{
    \def\@label{\GetTranslation{Act} \theact{}\xspace: }
  }
  \@clearpage{\@actlevel}
  \actmark{\@short}
  \addcontentsline{toc}{\@actlevel}{\@label\@short}
  \ifdefstring{\@actstyle}{custom}{
    \customact{\theact}{#2}
  }{
    \@displaytitle{\@actstyle}{\GetTranslation{Act} \theact}{#2}
  }
}
\WithSuffix\newcommand\act*[1]{%
  \@clearpage{\@actlevel}
  \ifdefstring{\@actstyle}{custom}{
    \customact*{#1}
  }{
    \@displaytitle{\@actstyle}{}{#1}
  }
}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% 
% \begin{macro}{\scene}
% \begin{macro}{\scene*}
% Define commands to introduce scenes.
%    \begin{macrocode}
\newcommand{\scene}[2][]{%
  \refstepcounter{scene}
  \ifstrempty{#1}{
    \def\@short{#2}
  }{
    \def\@short{#1}
  }
  \ifdefempty{\@short}{
    \def\@label{\GetTranslation{Scene} \thescene{}}
  }{
    \def\@label{\GetTranslation{Scene} \thescene{}\xspace: }
  }
  \@clearpage{\@scenelevel}
  \scenemark{\@short}
  \addcontentsline{toc}{\@scenelevel}{\@label\@short}
  \ifdefstring{\@scenestyle}{custom}{
    \customscene{\thescene}{#2}
  }{
    \@displaytitle{\@scenestyle}{\GetTranslation{Scene} \thescene}{#2}
  }
}
\WithSuffix\newcommand\scene*[1]{%
  \@clearpage{\@scenelevel}
  \ifdefstring{\@scenestyle}{custom}{
    \customscene*{#1}
  }{
    \@displaytitle{\@scenestyle}{}{#1}
  }
}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% 
% \begin{macro}{\interlude}
% \begin{macro}{\interlude*}
% Define commands to introduce interludes.
%    \begin{macrocode}
\newcommand{\interlude}[2][]{%
  \ifstrempty{#1}{
    \def\@short{#2}
  }{
    \def\@short{#1}
  }
  \ifdefempty{\@short}{
    \def\@label{\GetTranslation{Interlude}}
  }{
    \def\@label{\GetTranslation{Interlude}\xspace: }
  }
  \ifdefstring{\@interludelevel}{play}{
    \@clearpage{\@playlevel}
    \playmark{\@short}
    \addcontentsline{toc}{\@playlevel}{\@label\@short}
    \@displaytitle{\@playstyle}{\GetTranslation{Interlude}}{#2}
  }{\ifdefstring{\@interludelevel}{act}{
    \@clearpage{\@actlevel}
    \actmark{\@short}
    \addcontentsline{toc}{\@actlevel}{\@label\@short}
    \@displaytitle{\@actstyle}{\GetTranslation{Interlude}}{#2}
  }{% \@interludelevel is scene
    \@clearpage{\@scenelevel}
    \scenemark{\@short}
    \addcontentsline{toc}{\@scenelevel}{\@label\@short}
    \@displaytitle{\@scenestyle}{\GetTranslation{Interlude}}{#2}
  }}
}
\WithSuffix\newcommand\interlude*[1]{%
  \ifdefstring{\@interludelevel}{play}{
    \@clearpage{\@playlevel}
    \@displaytitle{\@playstyle}{\GetTranslation{Interlude}}{#1}
  }{\ifdefstring{\@interludelevel}{act}{
    \@clearpage{\@actlevel}
    \@displaytitle{\@actstyle}{\GetTranslation{Interlude}}{#1}
  }{% \@interludelevel is scene
    \@clearpage{\@scenelevel}
    \@displaytitle{\@scenestyle}{\GetTranslation{Interlude}}{#1}
  }}
}
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \subsubsection{Curtain}
%
% \begin{macro}{\curtain}
% Used to mark the end of an act. Prints ``curtain'' centered in its own line.
%    \begin{macrocode}
% Curtain
\newcommand\curtain{
  \begin{center}
    \Large\textsc{\GetTranslation{Curtain}}
  \end{center}
}
%    \end{macrocode}
% \end{macro}
%
% \subsection{Characters}
%
% \subsubsection{Spacing}
% Add (or not) an |$\backslash$xspace| command at the end of character names,
% depending on the |xspace| package option.
%    \begin{macrocode}
\newcommand{\@maybexspace}{%
  \if@xspace%
    \xspace%
  \fi%
}
%    \end{macrocode}
%
% \subsubsection{Characters' line}
% Define the command \lstinline|\@speaks|, wich introduce a character's line. It
% is not meant to be used by user, but will be used by further commands.  It
% takes two arguments: the character's name, and optionally, a stage direction.
%    \begin{macrocode}
\newcommand{\@speaks}[2][]{%
  \ifstrempty{#1}{%
    \speakswithoutdirection{#2}%
  }{%
    \speakswithdirection{#2}{#1}%
  }\@maybexspace%
}
%    \end{macrocode}
% 
% \begin{macro}{\speakswithdirection}
% \begin{macro}{\speakswithoutdirection}
% Definition of styles for introducing characters' lines. These
% commands can be overloaded by user.
%    \begin{macrocode}
\newenvironment{@smallcenter}
    {\par\smallskip\centering}
    {\par\nopagebreak\ignorespacesafterend}
\providecommand{\speakswithdirection}{}
\providecommand{\speakswithoutdirection}{}
\newcommand{\@setcharacterstyle}[1]{
  \ifstrequal{#1}{bold}{%
    % Bold style
    \renewcommand\speakswithdirection[2]{%
      \noindent%
      {\bfseries\sffamily ##1} \emph{(##2)}\xspace:%
    }
    \renewcommand\speakswithoutdirection[1]{%
      \noindent%
      {\bfseries\sffamily ##1\xspace:}%
    }%
  }{}%
  \ifstrequal{#1}{center}{%
    % Center style
    \renewcommand\speakswithdirection[2]{%
      \begin{center}%
      \textsc{##1},\\\emph{##2}%
      \end{center}%
      \par\ignorespacesafterend%
    }%
    \renewcommand\speakswithoutdirection[1]{%
      \begin{center}%
      \textsc{##1}%
      \end{center}%
      \par\ignorespacesafterend%
    }%
  }{}%
  \ifstrequal{#1}{imprimerie-verse}{%
    % Style for verse plays defined by the French Imprimerie nationale
    \renewcommand\speakswithdirection[2]{%
      \begin{@smallcenter}%
      \textsc{##1}, \emph{##2}%
      \end{@smallcenter}%
    }%
    \renewcommand\speakswithoutdirection[1]{%
      \begin{@smallcenter}%
      \textsc{##1}%
      \end{@smallcenter}%
    }%
  }{}%
  \ifstrequal{#1}{imprimerie-prose}{%
    % Style for prose plays defined by the French Imprimerie nationale
    \renewcommand\speakswithdirection[2]{%
      \noindent\hspace*{-\parindent}\textsc{##1}, \emph{##2}\xspace:%
    }%
    \renewcommand\speakswithoutdirection[1]{%
      \noindent\hspace*{-\parindent}\textsc{##1}\xspace:%
    }%
  }{}%
  \ifstrequal{#1}{arden}{%
    \renewcommand\speakswithdirection[2]{%
      \noindent\hspace*{-\parindent}\textsc{\MakeLowercase{##1}} [\emph{##2}]\quad%
    }%
    \renewcommand\speakswithoutdirection[1]{%
      \noindent\hspace*{-\parindent}\textsc{\MakeLowercase{##1}}\quad%
    }%
  }{}%
  \ifstrequal{#1}{simple}{%
    % Simple style
    \renewcommand\speakswithdirection[2]{%
      \indent\textsc{##1}, \emph{##2}\xspace:%
    }%
    \renewcommand\speakswithoutdirection[1]{%
      \indent\textsc{##1}\xspace:%
    }%
  }{}%
  \ifstrequal{#1}{margin}{%
    % Margin style
    \setlength{\leftskip}{3cm}
    \renewcommand\speakswithdirection[2]{%
      \hspace{-3cm} ##1 ##2
    }
    \renewcommand\speakswithoutdirection[1]{%
      \hspace{-3cm} ##1
    }%
  }{}%
}
%    \end{macrocode}
% \end{macro}
% \end{macro}
%
% \subsubsection{Dramatis person\ae{}}
% \begin{environment}{dramatis}
% In this environment are defined characters.
%    \begin{macrocode}
\newcommand{\@dramatis@clear}{}
\newcommand{\@empty@}{}
\providebool{@dramatis@hidden}
\newenvironment{dramatis}[1][]{
  \@dramatis@clear{}
  \undef{\@dramatis@clear}
  \ifstrequal{#1}{hidden}{
    \booltrue{@dramatis@hidden}
  }{\ifstrempty{#1}{
    \boolfalse{@dramatis@hidden}
    \dramatisenv
  }{
    \ClassError{thalie}{%
      Environment dramatis does not accept option #1.%
    }{
    }
  }
  }
}{%
  \notbool{@dramatis@hidden}{%
    \enddramatisenv
  }{}%
}
%    \end{macrocode}
% \end{environment}
%
% \begin{environment}{dramatisenv}
% \changes{v0.9a}{2017/04/22}{It is now possible to customize style of dramatis person\ae.}
% \begin{macro}{\dramatischaracter}
% \begin{macro}{\dramatischaractername}
% \begin{macro}{\dramatischaracterdescription}
% \begin{macro}{\characterspace}
% \begin{environment}{charactergroup}
% \changes{v0.6}{2013/11/02}{Groups of characters are now aligned with other caracters.}
% Customizable commands to build dramatis person\ae.
%    \begin{macrocode}
% Environment used to *display* dramatis personae.
\newenvironment{dramatisenv}{%
  \list{}{\rightmargin1cm\leftmargin2cm}\item[]
}{%
  \endlist%
}

% Display character name
\newcommand{\dramatischaractername}[1]{\textbf{#1}}

% Display character description
\newcommand{\dramatischaracterdescription}[1]{#1}

% Adds a vertical space
\newcommand{\characterspace}{ %
  \notbool{@dramatis@hidden}{%
    \smallskip\newline %
  }{} %
}

% Display dramatis personae name and description
\newcommand{\dramatischaracter}[2]{ %
  \hspace*{-1cm} %
  \ifboolexpr{(not test {\ifdefempty{#1}}) and test {\ifdefempty{#2}}}{%
    \dramatischaractername{#1} %
  }{}%
  \ifboolexpr{ test{\ifdefempty{#1}} and not test{\ifdefempty{#2}}}{%
    \dramatischaracterdescription{#2} %
  }{}%
  \ifboolexpr{ (not test{\ifdefempty{#1}}) and (not test{\ifdefempty{#2}})}{%
    \dramatischaractername{#1}, \dramatischaracterdescription{#2} %
  }{}%
  \newline %
}

% Environment to manage groups of characters
  \newlength{\@spaceaftergroup}
\newenvironment{charactergroup}[2][5cm]{%
  \notbool{@dramatis@hidden}{%
    \gdef\@groupname{#2} %
    \gdef\@grouplength{#1} %
      \hspace*{-1.3pt}\math\left. %
      \minipage[c]{#1} %
      \vspace*{2pt} %
  }{}%
}{%
  \notbool{@dramatis@hidden}{%
    \vspace*{-8pt} %
    \endminipage %
    \right\} \endmath %
    %
    \setlength{\@spaceaftergroup}{\linewidth}
    \addtolength\@spaceaftergroup{-\@grouplength}
    \addtolength\@spaceaftergroup{-20pt}
    \begin{minipage}[c]{\@spaceaftergroup}
        \@groupname %
    \end{minipage}
  \newline %
  }{}%
}
%    \end{macrocode}
% \end{environment}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{macro}
% \end{environment}
%
% \subsubsection{Character definitions}
% \begin{macro}{\setcharactername}
% Set (or change) the name used to introduce the lines of a character.
%    \begin{macrocode}
% The tough part of this code is to deal with optional argument.
\newcommand{\setcharactername}[2]{%
    \expandafter\gdef\csname#1name\endcsname{%
      #2\@maybexspace%
    }%
    \expandafter\gdef\csname#1\endcsname{%
      \@ifnextchar[{%
        \defcharcommand@with{#2}%
      }{%
        \defcharcommand@without{#2}%
      }%
    }%
    \xappto{\@dramatis@clear}{%
      \global\noexpand\csundef{#1}%
      \global\noexpand\csundef{#1name}%
    }%
}
%    \end{macrocode}
% \end{macro}
%
% Define the command used to introduce a character's line. It takes two
% arguments: the first one is the name of the command to define, and the second
% one is the name of the character corresponding to this command.
%    \begin{macrocode}
\newcommand{\@definecharactercommand}[2]{%
  \ifcsdef{#1}{%
    \ClassError{thalie}{%
      A command named \@backslashchar#1 already exists. We cannot define a new
      one.%
    }{%
      Choose another command name to introduce character #2's lines.%
    }%
  }{%
  }%
  \ifcsdef{#1name}{%
    \ClassError{thalie}{%
      A command named \@backslashchar#1name already exists. We cannot define a
      new one.%
    }{%
      Choose another command name to introduce character #2's lines, such that
      when a new command is defined by adding "name" to it, it does not
      conflict with an existing one.
    }%
  }{%
  }%
  \setcharactername{#1}{#2}%
}
\def\defcharcommand@with#1[#2]{\@speaks[#2]{#1}}
\def\defcharcommand@without#1{\@speaks{#1}}
%    \end{macrocode}
%
% \begin{macro}{\character}
% Define a character: put it in the dramatis person\ae{}, and define
% corresponding commands.
%   \begin{macrocode}
\pgfkeys{
  % Character definition
  /THALIE/CHARACTER/.is family,
  /THALIE/CHARACTER,
  cmd/.value required,
  cmd/.store in=\@cmd,
  drama/.value required,
  drama/.store in=\@drama,
  desc/.value required,
  desc/.store in=\@desc,
}
\newcommand{\character}[2][]{
  \undef{\@drama}
  \undef{\@cmd}
  \undef{\@desc}
  \pgfkeys{/THALIE/CHARACTER, #1}%
 % Forbidden combinations
  \ifboolexpr{
    ( test{\ifdef{\@cmd}} and test{\ifstrempty{#2}} ) or
    ( test{\ifstrempty{#2}} and test{\ifundef{\@cmd}} and test{\ifundef{\@desc}} and test{\ifundef{\@drama}} ) or
    ( test{\ifundef{\@cmd}} and (not test{\ifstrempty{#2}}) and test{\ifdef{\@drama}} )
  }{
    \ClassError{thalie}{Invalid character definition.}{All combination of omitted arguments are not allowed. See the documentation for more information}
  }{}
  % Defining character command
  \ifboolexpr{ test{\ifdef{\@cmd}} and (not test{\ifstrempty{#2}}) }{%
    \@definecharactercommand{\@cmd}{#2}
  }{}%
  \notbool{@dramatis@hidden}{%
    \ifboolexpr{ (not test{\ifstrempty{#2}}) and test{\ifdef{\@cmd}} and test{\ifdef{\@drama}} and test{\ifundef{\@desc}}}{%
      \ifdefempty{\@drama}{%
      % Hidden character. Nothing added to dramatis personae
      }{%
      % Populating dramatis personae
      \dramatischaracter{\@drama}{\@empty@}
      }%
    }{%
      % Populating dramatis personae
      \ifcsundef{@desc}{\gdef\@desc{}}{}%
      \ifcsundef{@drama}{\gdef\@drama{#2}}{}%
      \dramatischaracter{\@drama}{\@desc}
    }%
  }{}%
}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\disposablecharacter}
% Disposable character (character used only a few times, defined on-the-fly,
% that does not appear in the dramatis person\ae{}).
%    \begin{macrocode}
\newcommand{\disposablecharacter}[2][]{%
  \@speaks[#1]{#2}%
}
%    \end{macrocode}
% \end{macro}
%
% \subsection{Stage directions}
% \begin{macro}{\onstage}
% Centered stage direction.
%    \begin{macrocode}
\newcommand{\onstage}[1]{{\centering \emph{#1}\par\medskip}}
%    \end{macrocode}
% \end{macro}
%
% \begin{macro}{\did}
% Inline stage directions.
%    \begin{macrocode}
\newcommand{\did}[1]{\emph{(#1)} }
%    \end{macrocode}
% \end{macro}
%
% \begin{environment}{dida}
% Bigger stage directions, in its own paragraph.
%    \begin{macrocode}
\newenvironment{dida}{%
  \begin{quote}
  \begin{em}
  }{%
  \end{em}
  \end{quote}
}
%    \end{macrocode}
% \end{environment}
%
% \begin{macro}{\pause}
% Shortcut for \lstinline|\did{\GetTranslation{Pause}}|.
%    \begin{macrocode}
\newcommand\pause{\did{\GetTranslation{Pause}}}
%    \end{macrocode}
% \end{macro}

% \subsection{Splitting verses}
% \begin{macro}{\pauseverse}
% \changes{v0.7}{2015/12/28}{New commands \texttt{\bbackslash{}pauseverse}, \texttt{\bbackslash{}resumeverse}, \texttt{\bbackslash{}adjustverse}.}
% \begin{macro}{\resumeverse}
% \begin{macro}{\adjustverse}
% Commands to split a verse between several characters.
%    \begin{macrocode}
% Thanks to Timothy Li for his question, and David Carlisle for his answer:
% https://tex.stackexchange.com/questions/107726/107727#107727

\newlength{\@verseadjust}
\setlength{\@verseadjust}{0pt}

\newcommand{\adjustverse}[1]{\setlength{\@verseadjust}{#1}}

\newcommand{\pauseverse}{{\abovedisplayshortskip\z@\abovedisplayskip\z@
      \belowdisplayshortskip\z@\belowdisplayskip\z@
  $$\global\dimen\@ne\predisplaysize
   \xdef\tmp{%
        \predisplaysize\the\predisplaysize
        \prevgraf\the\prevgraf\relax}%
  $$\vskip\dimexpr-\parskip-\baselineskip\relax}\tmp
}

\newcommand{\resumeverse}{%
  \hspace{\@verseadjust}\hspace{\the\dimen\@ne}
}
%    \end{macrocode}
% \end{macro}
% \end{macro}
% \end{macro}
%
% \subsection{Package options}
% Manage package options.
%    \begin{macrocode}
\RequirePackage{pgfopts}

\pgfkeys{
  % Character style
  /THALIE/.cd,
  characterstyle/.value required,
  characterstyle/.default=simple,
  characterstyle/.is choice,
  characterstyle/bold/.code=\@setcharacterstyle{bold},
  characterstyle/center/.code=\@setcharacterstyle{center},
  characterstyle/margin/.code=\@setcharacterstyle{margin},
  characterstyle/simple/.code=\@setcharacterstyle{simple},
  characterstyle/arden/.code=\@setcharacterstyle{arden},
  characterstyle/imprimerie-verse/.code=\@setcharacterstyle{imprimerie-verse},
  characterstyle/imprimerie-prose/.code=\@setcharacterstyle{imprimerie-prose},
  characterstyle,
}

\pgfkeys{
  % play style
  /THALIE/.cd,
  playstyle/.value required,
  playstyle/.default=box,
  playstyle/.is choice,
  playstyle/center/.code=\def\@playstyle{center},
  playstyle/bigcenter/.code=\def\@playstyle{bigcenter},
  playstyle/box/.code=\def\@playstyle{box},
  playstyle/custom/.code=\def\@playstyle{custom},
  playstyle,
}
\pgfkeys{
  % act style
  /THALIE/.cd,
  actstyle/.value required,
  actstyle/.default=bigcenter,
  actstyle/.is choice,
  actstyle/center/.code=\def\@actstyle{center},
  actstyle/bigcenter/.code=\def\@actstyle{bigcenter},
  actstyle/box/.code=\def\@actstyle{box},
  actstyle/custom/.code=\def\@actstyle{custom},
  actstyle,
}
\pgfkeys{
  % scene style
  /THALIE/.cd,
  scenestyle/.value required,
  scenestyle/.default=center,
  scenestyle/.is choice,
  scenestyle/center/.code=\def\@scenestyle{center},
  scenestyle/bigcenter/.code=\def\@scenestyle{bigcenter},
  scenestyle/box/.code=\def\@scenestyle{box},
  scenestyle/custom/.code=\def\@scenestyle{custom},
  scenestyle,
}

\pgfkeys{
  % play level
  /THALIE/.cd,
  playlevel/.value required,
  playlevel/.default=chapter,
  playlevel/.store in=\@playlevel,
  playlevel,
}
\pgfkeys{
  % act level
  /THALIE/.cd,
  actlevel/.value required,
  actlevel/.default=section,
  actlevel/.store in=\@actlevel,
  actlevel,
}
\pgfkeys{
  % scene level
  /THALIE/.cd,
  scenelevel/.value required,
  scenelevel/.default=subsection,
  scenelevel/.store in=\@scenelevel,
  scenelevel,
}
\pgfkeys{
  % interlude level
  /THALIE/.cd,
  interludelevel/.value required,
  interludelevel/.default=act,
  interludelevel/.is choice,
  interludelevel/play/.code=\def\@interludelevel{play},
  interludelevel/act/.code=\def\@interludelevel{act},
  interludelevel/scene/.code=\def\@interludelevel{scene},
  interludelevel,
}
\newif\if@xspace
\pgfkeys{
  % xspace option
  /THALIE/.cd,
  xspace/.value required,
  xspace/.is if=@xspace,
  xspace/.default=true,
  xspace,
}

\ProcessPgfPackageOptions{/THALIE}
%    \end{macrocode}
%
% \begin{macro}{\setthalieoptions}
% \changes{v0.9a}{2017/04/22}{Add command \texttt{\bbackslash{}setthalieoptions}.}
% Redefine package options.
%    \begin{macrocode}
\newcommand{\setthalieoptions}[1]{%
  \pgfkeys{/THALIE/.cd, #1}%
}
%    \end{macrocode}
% \end{macro}
%
% \changes{v0.5}{2013/06/08}{First published version.}
%
% \addcontentsline{toc}{section}{Change History}
% \PrintChanges
%
% \begin{thebibliography}{9}
%   \addcontentsline{toc}{section}{References}
%   \bibitem{imprimerienationale}
%     {Imprimerie nationale},
%     \emph{Lexique des r\`egles typographiques en usage \`a l'Imprimerie nationale},
%     2002,
%     ISBN : 978-2-7433-0482-9
%   \bibitem{cyrano}
%     {Edmond Rostand},
%     \emph{Cyrano de Bergerac},
%     1897
%   \bibitem{midsummer}
%     {William Shakespeare},
%     \emph{A Midsummer Night's Dream},
%     1600
%   \bibitem{dtxtut}
%     {Scott Pakin},
%     \emph{How to Package Your \LaTeX{} Package --- Tutorial on writing .dtx and .ins files},
%     2004,
%     \url{http://www.ctan.org/pkg/dtxtut/}
%   \bibitem{clsguide}
%     {The \LaTeX{} Team},
%     \emph{\LaTeXe{} for class and package writers},
%     2006,
%     \url{http://www.ctan.org/pkg/clsguide}
%   \bibitem{drama}
%     {Matt Swift},
%     \emph{drama --- Production-style stage script in LaTeX},
%     2001,
%     \url{http://www.ctan.org/pkg/drama}
%   \bibitem{dramatist}
%     {Massimiliano Dominici},
%     \emph{dramatist --- Typeset dramas, both in verse and in prose},
%     2005,
%     \url{http://www.ctan.org/pkg/dramatist}
%   \bibitem{play}
%     {James Kilfiger},
%     \emph{play --- Typeset drama using \LaTeX{}},
%     2001,
%     \url{http://www.ctan.org/pkg/play}
%   \bibitem{screenplay}
%     {John Pate},
%     \emph{screenplay --- A class file to typeset screen­plays},
%     2012,
%     \url{http://www.ctan.org/pkg/screenplay}
%   \bibitem{sides}
%     {Wing L Mui},
%     \emph{sides --- A LaTeX class for typesetting stage plays},
%     2005,
%     \url{http://www.ctan.org/pkg/sides}
% \end{thebibliography}
%
% \StopEventually{%
% \addcontentsline{toc}{section}{Index}
% \PrintIndex
% }
% \Finale
\endinput