path: root/Master/texmf-dist/source/latex/screenplay/screenplay.dtx

% \iffalse
% +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=
% screenplay.dtx
% Latest version is available as:
%	http://dvc.org.uk/sacrific.txt/screenplay.zip
%
% Authored by and Copyright (C)2006 by
%        John Pate <johnny@dvc.org.uk>
%                http://dvc.org.uk
%
% This program is free software; you can redistribute it and/or modify it
% under the terms of the GNU General Public License as published by the
% Free Software Foundation; either version 2 of the License, or (at your
% option) any later version.
% 
% This program is distributed in the hope that it will be useful, but
% WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
% or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
% for more details.
% 
% You should have received a copy of the GNU General Public License along
% with this program; if not, write to the Free Software Foundation, Inc.,
% 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA
% 
% GPL v2 text also available as: 
% 	http://dvc.org.uk/gplv2.txt 
% +=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=+=
% \fi
%
% \iffalse
%<*dtx>
\ProvidesFile{screenplay.dtx}
\NeedsTeXFormat{LaTeX2e}[2003/12/01]
%</dtx>
%<driver>\ProvidesFile{screenplay.drv}
% \fi
%\ProvidesFile{screenplay}[2006/11/04 v1.521
%    LaTeX2e Draft Screenplay document class
%    (C)2006 John Pate
%    released under the GNU General Public License]
% \iffalse
%<*driver>
\documentclass{article}
\usepackage{doc}
\usepackage[dvips,letterpaper,pdfauthor=John\ Pate,
pdftitle=A\ LaTeX2e\ class\ for\ Draft\ Screenplays,
pdfsubject=LaTeX2e\ class\ documentation\ and\ source\ (C)2006\ John\ Pate]
{hyperref}
\RecordChanges
\CodelineIndex
\begin{document}
	\DocInput{screenplay.dtx}
\end{document}
%</driver>
% \fi
%
% \CheckSum{309}
% \changes{1.0.0}{2006 Sep 23}{first \texttt{screenplay.dtx, 2006/09/23, v1.457}}
% \changes{1.0.1}{2006 Sep 24}{minor code changes, revision to documentation,
% v1.461}
% \changes{1.0.2}{2006 Sep 26}{minor code changes, revision to documentation,
% added \texttt{test} file, \texttt{example} file, to \texttt{.dtx},
% amended \texttt{.ins}, v1.465}
% \changes{1.0.3}{2006 Sep 27}{minor code changes, revision to documentation,
% added change history, v1.487}
% \changes{1.0.4}{2006 Sep 28}{enabled hyperlinks in documentation, v1.491}
% \changes{1.0.5}{2006 Sep 29}{minor code changes, revision to documentation,
% v1.494}
% \changes{1.0.6}{2006 Sep 30}{fixed typos, v1.496}
% \changes{1.0.7}{2006 Oct 01}{revision to documentation, v1.499}
%
% \MakeShortVerb{\|}
%
% \GetFileInfo{screenplay}
% \title{\bfseries A \LaTeXe\ class for Draft Screenplays}
% \author{by\\John Pate}
% \date{This paper describes class \texttt{\filename}\\
% version \fileversion, released \filedate}
% \maketitle
%
% \section{Introduction}
%
% Every year \textit{The Academy of Motion Picture Arts
% and Sciences} runs a competition for screenplay writers,
% the \textit{Nicholl Fellowships in Screenwriting}.
% Full-length feature film screenplays are submitted (for
% a fee).  You can win money but, more importantly, placing in
% the competition will make agents take notice.  
% \textit{The Academy} recommends a particular format which this
% \texttt{class} file attempts to duplicate, using a 
% \texttt{.pdf} available from \textit{The Academy} website as the
% model.  This format has various functions, amongst which is a
% gate-keeping function to show you have at least a first idea.
% It also gives readers a better chance of assessing how long,
% in filmic terms, your screenplay would be.  Formatted along
% the lines recommended, you should aim to have your screenplay
% in the region of 120 pages long.  Although they say A4
% paper is acceptable, it is widely held that you severely
% handicap yourself if you don't use American 8.5" by 11"
% Letter size paper.  I have a ream on my lap as I type: 20
% pound, 106 bright, acid free.  My sister brought it from
% America for me---it's very expensive to buy outside the US
% and not easy to find. One might imagine it's at the
% photocopy stage that dealing with A4 in America becomes
% a nuisance---one more reason to put your magnum opus
% to the bottom of the pile.
%
% Of course, if you didn't know this already you likely
% need to do some serious reading and research \emph{before}
% you start writing.  I guess trying to understand what's
% going on here is a start.
%
% The format specifications are pretty straightforward.
% You'll have to believe me when I say it wasn't quite so
% straightforward for me to start from a minimal understanding
% of \TeX\ and \LaTeXe\ to a usable \texttt{.dtx} file.
%
% This is an attempt to turn \TeX\ into a typewriter emulator.
% A crazy idea---which is why it appealed to me, obviously.
% Fortunately I'm easily entertained.
%
% I hope \texttt{screenplay.dtx} proves of use (and
% instruction) to others as it has to me.
%
% Anyhoo, on with the show\dots
% \pagebreak
% \section{Getting started}
%
% You should have: 
%   \begin{itemize}
%       \item\texttt{README}---plain text file 
%       \item\texttt{screenplay.dtx}---the source file 
%       \item\texttt{screenplay.ins}---driver file
%       \item\texttt{screenplay.pdf}---the file I assume you're reading right now
%       \item\texttt{test.pdf}---format test \texttt{.pdf} result
%       \item\texttt{COPYING}---GNU General Public License
%   \end{itemize}
% 
% If not, get \texttt{screenplay.zip} via, \\
% \href{http://dvc.org.uk/sacrific.txt/screenplay.zip}%
% {\texttt{http://dvc.org.uk/sacrific.txt/screenplay.zip}}
% 
% Use the command, \\
% \texttt{> latex screenplay.ins}  \\
% to generate from \texttt{screenplay.dtx}\dots
%   \begin{itemize}
%       \item\texttt{screenplay.cls}---class file
%       \item\texttt{hardmarg.sty}---optional style package 
%       \item\texttt{example.tex}---example (very) mini-screenplay
%       \item\texttt{test.tex}---format test source file
%   \end{itemize}
%
% Once you've unpacked the bundle and generated the \texttt{class} 
% file do, \\
% \texttt{> latex test} \\
% to generate the \texttt{test.dvi} you can compare with the
% \texttt{test.pdf}.
%
% Make sure everything in the printing chain can deal properly
% with 8.5ins by 11ins Letter paper.  Print out your
% version of \texttt{test} and the provided \texttt{test.pdf}
% (on Letter paper of course!) and compare them.  The two
% printouts should be dimensionally identical. The left margin
% should measure as  \emph{exactly} 1.5ins.  If not you have
% an old version of \texttt{dvips} and/or your printer driver
% is configured incorrectly and you'll need to fix things before
% you proceed further.
%
% \section{Some example markup}
%
% Although \texttt{screenplay.cls} builds on the standard \TeX\ document
% class \texttt{article}, it is not intended you pass it any options
% (except for the release date specification, see below). 
% The formatting required is minimalist. \texttt{screenplay.cls} will
% issue an error message if you use any options.
%
% |\documentclass{screenplay}[2006/11/04]| \\
% is your first command, you can give the optional date argument in
% case of any earlier copies of \texttt{screenplay.cls} lying around.
%
% You are now in the \textit{document preamble} where you should
% initialise the values of some commands.
%
% You must define the title of screenplay\ldots\\
% |\title{The Title of Your Opus}| \\
% \ldots it will be uppercased automagically so don't fuss.
% If it's for the \textit{Nicholl Competition} you're done.
% However, you may as well also initialise\ldots \\
% |\author{Your Name}| \\
% \ldots capitalised as in ordinary writing, it's not munged
% in the typesetting, and\ldots\\
% |\address{99 Any Street \\| \\
% |Any Town \\ Postcode / Zip \\| \\
% |Phone \\| \\
% |email@whereami }| 
%
% The preamble is closed, of course, by\ldots\\ 
% |\begin{document}| 
%
% The first typesetting command, in the body of the document, should
% be one to build the title page.
% For the \textit{Nicholl Competition} this is |\nicholl|,
% \emph{alternatively} for the style used when submitting to
% an Agent, etc.\ use |\coverpage| (which uses your address
% and name from the preamble).
%
% The first thing you need to see in your screenplay is 
% FADE~IN: left justified with a blank line underneath.
% Scripts always start this way, because they do.  You deploy
% the |\fadein| command for this.
%
% Next would typically be a slugline, \\
% |\intslug[day]{Johnny's House}| \\
% which would produce\ldots \\
% INT.~JOHNNY'S HOUSE \quad DAY 
%
% I made the time of day optional because my screenplay had
% stuff happening in space where there is no time of
% day.  You will likely \emph{always} use either \textit{day}
% or \textit{night}.  (Refer to \textit{The Academy's} information
% on formatting.)  Likewise there's an |\extslug[]{}| for EXT.
%
% After a slugline you would typically have some description.  This
% is simply ordinary text with paragraph breaks as per usual.
%
% When you get to dialogue, you have the |dialogue environment|.
%
% |\begin{dialogue}{Johnny}| |After| |some| |description| |you|\\
% |would| |typically| |have|\quad  |some| |dialogue.| |\end{dialogue}|
% 
% Directions (short) can be put inside dialogue text either as an optional
% argument to the dialogue environment, |\begin{dialogue}[shouting]{Johnny}| 
% which will result in parenthesized text below the dialogue name, or
% the |\paren{}| command can be used to put parentheticals into the
% blocks of dialogue text.
% 
% Do not put any blank lines in dialogue text.
%
% So you wander on with your screenplay requiring little in the
% way of \LaTeXe's powers until you reach the end of the
% final scene.  Personally I use \texttt{Elvis} with a selection
% of macros in my \texttt{.exrc} to save me having to type the
% commands I've invented.
%
% The  command at the end of the final scene is always
% |\fadeout| to produce the words FADE~OUT: flushright. 
%
% Then it's simply a case of |\theend| and |\end{document}|.
%
% The only tricky parts of the formatting are deciding where to
% put \emph{pagebreaks} and hunting down places where
% \emph{linebreaks}\ldots\ |\\|\ \dots will help \TeX\ out with
% formatting.  You may need to insert linebreaks manually even
% where `|Overfull \hbox|' warnings are absent.  You'll know
% when it is necessary by spotting extra vertical whitespace in
% the document.  \texttt{example.tex} demonstrates this, read through
% the raw \texttt{.tex} file and try modifying it as indicated.
% It's likely you will have to put quite a few linebreaks
% ``by hand'' into dialogue text due to the restricted margins.
%
% \textbf{Do not put in pagebreaks until you have really, really,
% really finished editing.}
%
% Putting in pagebreaks will likely involve using the |\dialbreak| 
% command, though for description text |\pagebreak| is all that
% is required. 
% 
% The |\dialbreak| command needs to know the character name and any
% optional directions as required.
%
% If you've used the |\titleover environment| you may
% need the |\titbreak| command (more tea, vicar?).  However, mostly
% for TITLE OVER: you'll be doing a date to accommodate flash\-backs
% or flash\-forwards, I expect, so use the |\centretitle| command
% as in\\
% |\centretitle{December 21, 2012}|.\\ 
% Yes, that's the English (or for that matter French and Canadian)
% ``centre'' not ``center'' in a stunning break from tradition.
%
% For further enlightenment, you should scrutinise the markup of
% \texttt{example.tex} and peruse \textbf{The Coding}
% section of this document.
% 
% You can see a completed script marked-up
% via \LaTeXe\ and formatted with \texttt{screenplay.cls}
% at \href{http://dvc.org.uk/sacrific.txt/}%
% {\texttt{http://dvc.org.uk/sacrific.txt/}}. 
% There is also, at time of writing, a ``work-in-progress'' script
% that has had manual linebreaks inserted but not manual pagebreaks.
% 
% \section{Hard Margins package}
% \changes{1.0.9}{2006 Oct 06}{added \texttt{hardmarg.sty}, v1.502}
%
% Here we're emulating a typewriter.  On a typewriter, the left
% margin is a hard stop, whereas the right margin is a bell
% (those of us who typed in the stone age well remember
% that ``ding'').  Even the best typist would run past the
% right margins by a character or two once in a while, sometimes
% deliberately.  Hence the ``fudge factors'' interpolated by me,
% which in days of yore would perhaps have been referred to as
% the \textit{gutter}.
% 
% The provided \texttt{hardmarg.sty} shows you what happens
% with the \textit{fudge factors} eliminated.  Place the command 
% |usepackage{hardmarg}| in the document preamble
% (i.e.\ between |\documentclass{|\ldots|}| and |\begin{document}|) 
% and judge for yourself.  Personally I'll stick with my 
% \textit{fudge}.  All the brain-work makes me crave carbs anyway.
% But if you want, use it to fix your script to tighter margins.
% 
% \section{User customisation}
%
% \emph{\textbf{Don't!}}  It really is a case of KISS for Draft
% Screenplay formatting.  There are a couple of things you might
% get away with though\ldots
%
% You may want to change how the time of day is spaced from the
% rest of the slugline.  You can do this without editing the
% class file by redefining the |\slugspace| command 
% e.g.\ |\renewcommand*{\slugspace}{ - }|
% which will change the default 3em space to |em hyphen em| spacing.
% Likewise you could |\renewcommand*{\pov}{POV}| to lose the dots.
% If for some strange reason you don't like \textit{The Academy's} use
% of uppercase for (MORE) and (CONT'D) you can |\renewcommand*| the
% |\more| and |\contd| macros.
%
% Should you not want page number 1 to appear on the first page
% of the body of the script put the |\thispagestyle{empty}| command
% in your document source file immediately \emph{after} the command
% to build the title page.
%
% Likely, in the usual \LaTeXe\ fashion, you should develop your own
% style package  depending on what conventions you want to use.
%
% \section{Specs from \textit{The Academy}}
%
% Be sure to read, carefully, and inwardly digest and re-read, \\
% \href{http://www.oscars.org/nicholl/format.html}%
% {\texttt{http://www.oscars.org/nicholl/format.html}} \\
% and, \\
% \href{http://www.oscars.org/nicholl/script.pdf}%
% {\texttt{http://www.oscars.org/nicholl/script.pdf}}, \\
% (the model document).
%
%   \begin{itemize}
% \item 20lb Letter paper (8.5"x11.0") \\
% Courier 12pt, 10 pitch 
% 
% \item\textbf{Page} \nopagebreak \\
% Top margin:	1.0" \\
% Bottom margin: 0.5"-1.5" \\
% Left margin:	1.5" \\
% Right margin:	1.0" 
% 
% \item\textbf{Dialogue} \nopagebreak \\
% tab NAME to:	4.2" \\
% Left margin:	3.0" \\
% Right margin:	2.5" \\
%   \textsl{Parenthetical}\nopagebreak \\
% Left margin:	3.7" \\
% Right margin:	3.3" 
% 
% \item\textbf{Numbering} \nopagebreak \\
% top right, Arabic \\
% Top margin:	0.5" \\
% Right margin:	0.75" 
%   \end{itemize}
% 
% INT/EXT. SLUG LINE DESCRIPTION \quad  DAY/NIGHT \nopagebreak \\
%	(with some kind of extra spacing before time of day)
%
% \StopEventually{\PrintIndex\PrintChanges}
%
% \section{The Coding}
% \changes{1.0.8}{2006 Oct 02}{minor format fix, v1.500}
% \changes{1.1.0}{2006 Oct 08}{minor code changes, v1.503}
% \changes{1.1.1}{2006 Oct 08}{minor code changes, v1.504}
% \changes{1.1.5}{2006 Oct 19}{minor code changes, revision to
% comments, v1.511}
% \changes{1.2.0}{2006 Nov 04}{minor code, documentation, changes, v1.521}
%
% \texttt{screenplay.cls v1.521} was tested with\ldots 
% \begin{itemize}
%	\item pdfe\TeX\ 3.141592-1.21a-2.2 (\Web2C\ 7.5.4)
%	\item \texttt{dvips(k)} 5.95a
%	\item \texttt{kpathsea} version 3.5.4
%	\item \texttt{article} 2004/02/16 v1.4f
% \end{itemize}
%
% IMHO, it's worth reading through the comments, there's
% some useful stuff for you in there. \\
% \vspace{1ex} \\
%\iffalse
%<*class>
%\fi
% We are a \LaTeXe\ thang\ldots
%    \begin{macrocode}
\NeedsTeXFormat{LaTeX2e}[2003/12/01]
%    \end{macrocode}
% Say it like it is\ldots
%    \begin{macrocode}
\ProvidesClass{screenplay}[2006/11/04 v1.521
	LaTeX2e Draft Screenplay document class
	(C)2006 John Pate
	released under the GNU General Public License]
%    \end{macrocode}
% Whinge if the user is being a bozo\ldots
%    \begin{macrocode}
\DeclareOption*{%
        \PackageError{screenplay}{Unwanted option '\CurrentOption'}%
        {There are no options available for class screenplay v1.521}}
\ProcessOptions\relax
%    \end{macrocode}
% |ifthen| needed for testing for optional args\ldots 
%    \begin{macrocode}
\RequirePackage{ifthen}[2001/05/26]
%    \end{macrocode}
% Use \texttt{article} class for its base functionality,
% \emph{must} be
% American Letter paper \emph{not} A4, \texttt{screenplay.cls}
% eats any papersize options and ignores them\ldots
%    \begin{macrocode}
\LoadClass[12pt,letterpaper,onecolumn,oneside]{article}[2004/02/16]
%    \end{macrocode}
% \texttt{geometry} package puts marks in to suggest to dvi interpretors
% to do the right thang for Letter paper\ldots
%    \begin{macrocode}
\RequirePackage[dvips,letterpaper]{geometry}[2002/07/08]
%    \end{macrocode}
% \ldots and make sure your printer driver (which means
% \textit{Ghostscript} in my case) knows Letter.
% I say again, you \emph{must} use American 8.5"x11" Letter
% paper---stationers in the UK may call it ``US Quarto'' if they've
% even heard of it, see\ldots\\
% \href{http://www.gwydir.demon.co.uk/jo/units/print.htm}%
% {\texttt{http://www.gwydir.demon.co.uk/jo/units/print.htm}}
%    \begin{macrocode}
\setlength{\paperheight}{11in}
\setlength{\paperwidth}{8.5in}
%    \end{macrocode}
%
% \emph{Must} have \texttt{Courier} as font (may cause warnings about
% font stuff, ignore)\ldots 
%    \begin{macrocode}
\RequirePackage{courier}[2004/09/15]
\renewcommand*{\familydefault}{\ttdefault}
%    \end{macrocode}
% You should \emph{not} hyphenate or full justify for Nicholl format\ldots
%    \begin{macrocode}
\raggedright
%    \end{macrocode}
%    \begin{macro}{Page Nums}
% Arabic top right, I'll live with where \TeX\ puts the margin\ldots
%    \begin{macrocode}
\pagenumbering{arabic}
\pagestyle{myheadings}
%    \end{macrocode}
% (You can force the page numbers out towards the right with \\
% |\markright{\hspace*{6.2in}}| \\
% in the document preamble, at the cost of `|Overfull hbox|' warnings,
% if you like.)
%    \end{macro}
%    \begin{macro}{CR/LF}
% Line spacing / pitch---it looks to me the standard
% \LaTeXe\ \texttt{courier} font is correct pitch,
% 12pt skip is what's in \texttt{script.pdf}\ldots
%    \begin{macrocode}
\setlength{\baselineskip}{12pt plus 0pt minus 0pt}
%    \end{macrocode}
% and this |\baselinestretch| appears to emulate \texttt{script.pdf}
% closely and, more importantly, measures up as matching the effect
% of the |\baselineskip| value---it matches what \textit{Movie Magic
% Screenwriter} does, for instance\dots
%    \begin{macrocode}
\renewcommand*{\baselinestretch}{0.8}
%    \end{macrocode}
% \textit{vspace} adjustment in |\minipage| and |\parbox| in dialogue
% to correct line spacing, should likely be adjusted if
% |\baselinestretch| is altered for some (crazy) reason\ldots
% \changes{1.1.3}{2006 Oct 16}{minor format fix, v1.508}
%    \begin{macrocode}
\newcommand*{\dialfix}{\vspace{2pt}}
%    \end{macrocode}
% skip one line between paras\ldots
%    \begin{macrocode}
\setlength{\parskip}{\baselineskip}
%    \end{macrocode}
% no paragraph indent\ldots 
%    \begin{macrocode}
\setlength{\parindent}{0in}
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{\slugspace} 
% Extra inter-word spacing in sluglines\ldots 
%    \begin{macrocode}
\newcommand*{\slugspace}{\hspace{2.0em plus 0em minus 0em}}
%    \end{macrocode}
% (will result in a total of |3em| space).
%    \end{macro}
%    \begin{macro}{Margins/tabs}
% \changes{1.1.4}{2006 Oct 17}{minor code changes, revision to documentation, v1.509}
% See specs, 
% fudge factors (i.e.\ a ``gutter'') are needed to resemble
% the ``correct'' layout---take a ruler to it and \texttt{script.pdf}.
%
% 0.1" represents |1 em| in \texttt{courier} 12pt 10 pitch.
%    \begin{macro}{left margin}
% 1.5", default 1" +
%    \begin{macrocode}
\setlength{\evensidemargin}{0.5in}
\setlength{\oddsidemargin}{0.5in}
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{top margin}
% 0.5" to number, 1" to body\ldots
%    \begin{macrocode}
\setlength{\topmargin}{-0.5in}
\setlength{\headsep}{0.4in}
\setlength{\topskip}{0in}
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{bottom margin}
% 11" - (1" top margin) - (0.5" bottom) = 
%    \begin{macrocode}
\setlength{\textheight}{9.5in}
%    \end{macrocode}
% \ldots bottom can go to 1.5" for page breaking purposes.
%    \end{macro}
%    \begin{macro}{right margin}
% 6" width for description text to give 1" right margin, +0.1" fudge\ldots 
%    \begin{macrocode}
\setlength{\textwidth}{6.0in}
\newlength{\widthgutter}
\setlength{\widthgutter}{0.1in}
\addtolength{\textwidth}{\widthgutter}
%    \end{macrocode}
% (later on, we must adjust centring and flush right to the ``correct''
% margin by subtracting |\widthgutter|).
%    \end{macro}
%
% \textbf{Tabbing / spacing dialogues}\\
% Width of dialogue text, 3" with 0.2" fudge\ldots
%    \begin{macrocode}
\newlength{\dialwidth}
\setlength{\dialwidth}{3.0in}
\newlength{\dialgutter}
\setlength{\dialgutter}{0.2in}
\addtolength{\dialwidth}{\dialgutter}
%    \end{macrocode}
%	3" from left edge of page (1.5" left margin + 1.5")\ldots
%    \begin{macrocode}
\newcommand*{\dialtab}{\hspace*{1.5in}}
%    \end{macrocode}
%	 \textbf{name}, tab in 4.2" (margin + |\dialtab| + |\dialnametab|)
% from left edge of page\ldots
%    \begin{macrocode}
\newcommand*{\dialnametab}{\hspace*{1.2in}}
%    \end{macrocode}
%	parenthetical 1.5" with 0.2" fudge\ldots
%    \begin{macrocode}
\newlength{\parenwidth}
\setlength{\parenwidth}{1.5in}
\addtolength{\parenwidth}{\dialgutter}
%    \end{macrocode}
%	parenthetical, tab in 3.7" (margin + |\dialtab| + |\parentab|)
% from left edge of page\ldots
%    \begin{macrocode}
\newcommand*{\parentab}{\hspace{0.7in}}
%    \end{macrocode}
%
% AFAICS floats not involved\ldots
%    \begin{macrocode}
\renewcommand*{\textfraction}{1}
\renewcommand*{\topfraction}{0}
\renewcommand*{\bottomfraction}{0}
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{Title Pages}
% \changes{1.1.8}{2006 Nov 01}{revisions to title page build,
% documentation, v1.517}
% \changes{1.1.9}{2006 Nov 03}{minor revision to title page build, v1.518}
%
% Use one of |\nicholl| or |\coverpage| to taste.
% This must be the first typesetting command after |\begin{document}|.
% (|\title| and |\author| code is already defined in the |article| class.)
%
% \begin{macro}{\nicholl}
% For Nicholl Competition---just the title\ldots
%    \begin{macrocode}
\newcommand{\nicholl}{
	\thispagestyle{empty}
	\vspace*{2.25in}
	\begin{center}\MakeUppercase{\@title}\end{center}
	\newpage\setcounter{page}{1}
}
%    \end{macrocode}
% \end{macro}
%    \begin{macro}{\address}
% Your address details for the title page\ldots
%    \begin{macrocode}
\newcommand{\@address}{Contact via Agency}
\newcommand{\address}[1]{\renewcommand{\@address}{#1}}
%    \end{macrocode}
% \ldots see also\ldots
%    \end{macro}
%    \begin{macro}{\agent}
% Some people like to put copyright and WGA registration
% details on their submitted scripts\ldots although the received
% wisdom is that this marks you as an amateur, you can use
% this macro.
%
% I'm calling this |\agent| to pretend you're putting
% your Agent's details instead of your own address---hence
% if you don't define |\address| (and use |\coverpage|) you'll
% get the boilerplate text ``Contact via Agency'' under your
% name in the ``author's address details'' area.  What
% you would do is omit your own address and only have your
% Agent's address.  Putting this the other side of the page
% makes it immediately clear what's who.  No really, there's
% no need to use this \emph{unless} you're with an agency
% but it's your script\dots
%    \begin{macrocode}
\newcommand{\@agent}{~}
\newcommand{\agent}[1]{\renewcommand{\@agent}{#1}}
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{\titskip}
% Determines how far down below the title the extra info
% on the title page is written.
% You may have to adjust the |\titskip| if you put in
% a lot of text for |\address| and/or |\agent| but if you do
% there's probably too much---it's a rubber length\ldots
%    \begin{macrocode}
\newlength{\titskip}
\setlength{\titskip}{3.75in plus 0in minus 1.5in}
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{\coverpage}
% Now the ability to make the the type of title page for
% Draft Scripts submitted to Agents, 
%    \begin{macrocode}
\newcommand{\coverpage}{
	\thispagestyle{empty}
	\vspace*{2.25in}
	\begin{center}{\MakeUppercase{\@title}}\\
		\vspace{\baselineskip}
		by\\
		\vspace{\baselineskip}
		\@author
	\end{center}
	\vspace{\titskip}
%    \end{macrocode}
% |\agent| details at left margin in a |\parbox|, 2" space then
% |\author| and |\address| details in a |\parbox|\ldots
%    \begin{macrocode}
\parbox[t]{2.0in}{\@agent}\hspace{2.0in}
\parbox[t]{2.0in}{\@author\\\@address} 
%    \end{macrocode}
% Reset page numbers\ldots
%    \begin{macrocode}
	\newpage\setcounter{page}{1}
}
%    \end{macrocode}
%    \end{macro}
% End title page---author details 
%    \end{macro}
%    \begin{macro}{\more \contd}
% \changes{1.1.6}{2006 Oct 22}{minor code changes, revision to
% documentation, v1.512}
% \textbf{More and Continued.} You may want to use these
% macros if you feel it's necessary to follow what appears to
% be the ``older'' style where they aren't only used for
% pagebreaks\ldots
%    \begin{macrocode}
\newcommand*{\more}{(MORE)}
%    \end{macrocode}
%    \begin{macrocode}
\newcommand*{\contd}{(CONT'D)}
%    \end{macrocode}
%    \end{macro}
% \textbf{Dialogue blocks}\ldots
%    \begin{macro}{\paren}
% |\paren{hello world}| \\
% parenthetical within dialogue environment\ldots
% only for \emph{very short} text (directions) within dialogue,
% the optional argument is for internal use \emph{only}\ldots
%    \begin{macrocode}
\newcommand{\paren}[2][\\]{%
#1\parentab\parbox[t]{\parenwidth}{\raggedright(#2)\dialfix}\\
}
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{dialogue env}
% |\begin{dialogue}[directions]{character name}| \ \ldots\  |\end{dialogue}|\\
% |\begin{dialogue}{character name}| \ \dots\   |\end{dialogue}|\\
% |\minipage| won't allow pagebreaks, see below for new manual
% pagebreak command for this environment.  Do \emph{not} have blank lines
% inside this environment.
% \textbf{Name} is outside |\minipage| to mitigate `|Overfull \hbox|' 
% warnings with long names\ldots
%    \begin{macrocode}
\newenvironment{dialogue}[2][]{

\dialtab\dialnametab\hbox{\MakeUppercase{#2}}\\*
\dialtab\begin{minipage}[b]{\dialwidth}
\dialfix
\raggedright
\ifthenelse{\not\equal{#1}{}}
{
\paren[]{#1}
}{}
}{
\end{minipage}

}
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{\dialbreak}
% Forcing pagebreak in dialogue,\\
% |\dialbreak{Character}| \\
% |\dialbreak[directions]{Character}|\\
% (need to know character name---\LaTeXe\ scoping rules don't
% seem to like global vars, somebody tell me otherwise)
% \emph{Note:}
% only do any manual pagebreaks when you absolutely positively
% have killed every muthafucka in the room!\dots
%    \begin{macrocode}
\newcommand{\dialbreak}[2][]{
\\\dialnametab\hbox{\more}%
\end{dialogue}
\newpage
\ifthenelse{\not\equal{#1}{}}
{
\begin{dialogue}[#1]{\MakeUppercase{#2} \contd}
}{
\begin{dialogue}{\MakeUppercase{#2} \contd}
}
}
%    \end{macrocode}
%    \end{macro}
% \textbf{Sluglines}\\
% Optional arg for night/day.
% You probably should not consider time of day optional when
% you're writing descriptions---unless you're in a spaceship,
% of course\ldots
%    \begin{macro}{\intslug}
% INT. SLUGLINE DESCRIPTION \quad DAY\\
% |\intslug[time of day]{description text}|\\
% |\intslug{description text}|
%    \begin{macrocode}
\newcommand{\intslug}[2][]{

\MakeUppercase{INT. #2}%
\ifthenelse{\not\equal{#1}{}}
                {%
\slugspace\MakeUppercase{#1}\hspace{\fill}
                }{}
\nopagebreak 

}
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{\extslug}
% EXT. SLUGLINE DESCRIPTION \quad DAY\\
% |\extslug[time of day]{description text}| \\
% |\extslug{description text}|
%    \begin{macrocode}
\newcommand{\extslug}[2][]{

\MakeUppercase{EXT. #2}%
\ifthenelse{\not\equal{#1}{}}
                {%
\slugspace\MakeUppercase{#1}\hspace{\fill}
                }{}
\nopagebreak

}
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{\intextslug}
% Apparently people do this\dots \\
% INT./EXT. SLUGLINE DESCRIPTION \quad DAY\\
% |\intextslug[time of day]{description text}| \\
% |\intextslug{description text}|
%    \begin{macrocode}
\newcommand{\intextslug}[2][]{

\MakeUppercase{INT./EXT. #2}%
\ifthenelse{\not\equal{#1}{}}
                {%
\slugspace\MakeUppercase{#1}\hspace{\fill}
                }{}
\nopagebreak

}
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{\extintslug}
% and/or this\dots \\ 
% EXT./INT. SLUGLINE DESCRIPTION \quad DAY\\
% |\extintslug[time of day]{description text}| \\
% |\extintextslug{description text}|
%    \begin{macrocode}
\newcommand{\extintslug}[2][]{

\MakeUppercase{EXT./INT. #2}%
\ifthenelse{\not\equal{#1}{}}
                {%
\slugspace\MakeUppercase{#1}\hspace{\fill}
                }{}
\nopagebreak

}
%    \end{macrocode}
%    \end{macro}
% \textbf{Title Over}
%
%    \begin{macro}{titleover env}
% |\begin{titleover}| \ \ldots\  |\end{titleover}| \\
% as pseudo dialogue environment (think ``Star Wars'')
% the optional argument is for internal use \emph{only}\ldots
%    \begin{macrocode}
\newenvironment{titleover}[1][]{

\ifthenelse{\not\equal{#1}{}}
{
TITLE OVER #1:
}{
TITLE OVER:
}%
\\*[\baselineskip]
\dialtab\begin{minipage}[b]{\dialwidth}
\raggedright
}{
\end{minipage}

}
%    \end{macrocode}
%    \end{macro}
%
%    \begin{macro}{\titbreak}
% pagebreak for titleover environment\ldots
%    \begin{macrocode}
\newcommand{\titbreak}{
\\\dialnametab\hbox{\more}%
\end{titleover}
\newpage
\begin{titleover}[\contd]
}
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{\centretitle}
% |\centretitle| |{short text}| \\
% titleover for short text most often a date, centred with
% adjustment for gutter\ldots
%    \begin{macrocode}
\newcommand{\centretitle}[1]{

TITLE OVER:\\*[\baselineskip]
\hspace*{\fill}{#1}\hspace{\fill}\hspace{\widthgutter}

}
%    \end{macrocode}
%    \end{macro}
% \textbf{Other macros}
%
%    \begin{macro}{\fadein}
% Always the \emph{first} thing in your script, for some reason\ldots
%    \begin{macrocode}
\newcommand{\fadein}{

FADE IN:

}
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{\fadeout}
% Always the last thing in your script for some reason,
% flush right with adjustment for gutter\ldots
%
%    \begin{macrocode}
\newcommand{\fadeout}{

\hspace*{\fill}FADE OUT:\hspace{\widthgutter}

}
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{\intercut}
% flush right with adjustment for gutter\ldots
%    \begin{macrocode}
\newcommand{\intercut}{

\hspace*{\fill}INTERCUT WITH:\hspace{\widthgutter}

}
%    \end{macrocode}
%    \end{macro}
%    \begin{macro}{\pov \revert}
% \changes{1.1.7}{2006 Oct 25}{minor revisions, v1.516}
% Switch point of view\ldots
%    \begin{macrocode}
\newcommand*{\pov}{P.O.V.}
%    \end{macrocode}
% \ldots switch it back\ldots
%    \begin{macrocode}
\newcommand*{\revert}{REVERSE \pov}
%    \end{macrocode}
%    \end{macro}
%
%    \begin{macro}{\theend}
% But this is what we've all been waiting for\ldots
% OK, so this is actually the \emph{last} thing in the script\ldots
%    \begin{macrocode}
\newcommand{\theend}{

\hspace*{\fill}THE END\hspace{\fill}\hspace{\widthgutter}

}%THE END
%    \end{macrocode}
%    \end{macro}
%\iffalse
%</class>
%\fi
%\iffalse
%<*hard>
%\fi
%    \begin{macro}{hardmarg.sty}
%
% \textbf{Hard Margins package} \\
% Re-defines margins to exactly as stated in \texttt{script.pdf}.
% Try it out and see if you like it.  Also shows you what
% todo if you want to fiddle with some of the margin settings\ldots
%
% Issue info as to what we do\ldots
%    \begin{macrocode}
\ProvidesPackage{hardmarg}[2006/11/04 v1.521
For use with class screenplay
(C)2006 John Pate
released under the GNU General Public License]
%    \end{macrocode}
% Hard 1" right margin\ldots
%    \begin{macrocode}
\setlength{\textwidth}{6.0in}
%    \end{macrocode}
% Flushright and centring use this, so eliminate it\ldots
%    \begin{macrocode}
\setlength{\widthgutter}{0in}
%    \end{macrocode}
% Set dialogue to 3" width, right margin 2.5"\dots
%    \begin{macrocode}
\setlength{\dialwidth}{3.0in}
%    \end{macrocode}
% Set parentheticals to 1.5" width, right margin 3.3"\ldots
%    \begin{macrocode}
\setlength{\parenwidth}{1.5in}
%    \end{macrocode}
%    \end{macro}
%\iffalse
%</hard>
%\fi
%
% \section{More about paper}
% \changes{1.1.2}{2006 Oct 12}{revision to documentation, v1.507}
%
% Unless you're in America, getting Letter paper will be a problem.
% Another issue is that the recommended 20lb weight paper is
% equivalent to 75gsm, a non-standard weight for metric papers.
% (Well, strictly speaking the Americans have defined their measures
% using metric standards but let's not get into that.)
% Americans have a 24lb weight paper that's close to 80gsm.
% I've got samples of Letter in both 20lb and 80gsm.  The same script, with
% the same card covers (240gsm plain white card) measures 12mm vs 15mm
% in thickness.  The 80gsm stuff is noticeably heavier and thicker
% (less flexible).
%
% IMHO good quality 20lb is nicer in handling and you can very much
% tell the difference.  Old-style typing paper was usually pretty
% thin for ``normal'' use.
%
% Copy Shops will cut down A3 paper to 8.5" by 11" for you but
% whether they'll get you 75gsm weight is another matter.  One
% told me he could ``probably'' get 75gsm paper if I really
% wanted it.  
%
% Buying Letter paper mail order in the UK is very expensive and
% I haven't seen American-style pound bond weights quoted---the
% ``heavy'' paper I have was sourced in the UK as
% XEROX PREMIER 216mm~x~279mm 80gsm.
%
% Another issue is that the paper must be three-hole punched.  Specs
% gleaned from the Internet suggest that Letter three-hole paper is
% a central hole (i.e.\ 140mm down from the top edge) with the other
% two holes 108mm up, and down, from that central hole.  I'm hoping
% to get some genuine three-hole from America to check that out,
% meantime I got a Copy Shop to drill a ream of paper for me (and
% some card for covers).  I'd advise that if you can't buy punched
% paper, get a Copy Shop to drill it for you.  It produces a vastly
% neater result than using a hole punch---and a suitable hole punch
% for ``home use'' is going to be rather expensive in any case.
%
% And then there's the paper fasteners\ldots\\
% To cut a long story short, here's what you want:
%   \begin{itemize}
%	\item ACCO solid brass \#5 brads, 1.25" long, part number 71505;
%	\item ACCO \#2 brass washers, part number 71511.
%   \end{itemize}
% \ldots and a rubber mallet to hammer them in with.
% The rubber mallet is easy enough to come by but 
% you'll have to source the paper fasteners from America (it seems to
% be mainly the screenwriting fraternity that call them ``brads''
% rather than paper fasteners, BTW).  The brass-plated ersatz
% versions available in the UK are clearly \emph{not} up to the job
% by a long shot. And beware that ACCO make a version that isn't
% solid brass and is inferior to these all-brass ones, hence the
% necessity for part numbers.
%
% The washers are for the back, where the prongs are folded over;
% you use \emph{two brads}, each with a single washer, one in the
% top and one in the bottom hole leaving the central hole empty.
%
% And while I'm on about paper, 120 pages is really the absolute
% longest you should go.  A script that runs between 100 and 110
% pages is a better bet---and that's with plenty of whitespace in the
% passages of description.
%
% \section{Todo}
% If anybody else uses it maybe they'll spot stuff that's
% wrong but \textsl{Johnny} says, ``It works for me.''
%
% The test file \texttt{test.tex} shows \texttt{screenplay}
% markup applied to ``FOR A FEW DAYS MORE''
% (\href{http://www.oscars.org/nicholl/script.pdf}%
% {\texttt{http://www.oscars.org/nicholl/script.pdf}})
% and the \texttt{test.pdf} file was generated from that.
%
% A printout of the first page \texttt{script.pdf} and
% \texttt{test.pdf} show identical pitch and the inter-line
% spacing is pretty close.  However, I chose a |\baselinestretch|
% value to complement the |\baselineskip| and be more typographically
% correct rather than exactly match \texttt{script.pdf}.
%
% You can easily tell which is which because \texttt{test.pdf}
% numbers the first page whilst \texttt{script.pdf} starts numbering
% on page~2.  
%
% If I get any \emph{useful} feedback I \emph{may} alter things
% accordingly.
%
% Feel free to help with documentation.
%
% \newpage
% \section{A note for our Sponsor}
%
% I don't think I'm alone when I say\ldots 
% \bigskip
%
% \Huge Hail Eris!
%
% \bigskip
%  All Hail Discordia!
% \normalsize
% \newpage
%
%\iffalse
%<*rider>
%% Test document: facsimile of first page
%% of http://www.oscars.org/nicholl/script.pdf
%% to demonstrate veracity of class screenplay
%% see http://www.dvc.org.uk/sacrific.txt/
%% for more information on the document class.
%%
\documentclass{screenplay}[2006/11/04]
\title{For a Few Days More}
\author{April Rider}
\address{555 George St NNW\\
Kaplan, ND 77777\\
999-999-9999}
\begin{document}
\coverpage
\fadein
\intslug[day]{Driskill Hotel Seminar Room}
JOE and APRIL burst through the doors into a clean, well-lit
seminar room.
\begin{dialogue}{Joe}
Are we in time?
\end{dialogue}
\begin{dialogue}{April}
How could they start without us?
We're the main attraction.
\end{dialogue}
Joe catches his breath as he leans against the podium at the
front of the room.
\begin{dialogue}[looking about the room]{Joe}
We are?
\end{dialogue}
\begin{dialogue}{April}
Don't be a moron.  You know we've
been invited to Austin to discuss
script format.
\end{dialogue}
\begin{dialogue}{Joe}
But why is the room empty?
\end{dialogue} 
April and Joe both look out across the room~-- rows of empty
chairs and nary a person in sight.
\begin{dialogue}{April}
Okay, okay, don't panic.
\end{dialogue} 
She takes three deep breaths.  Then she looks at her watch
and smiles.
\begin{dialogue}[continuing]{April}
We're an hour early.\dots  We should
rehearse.
\end{dialogue}
\begin{dialogue}{Joe}
Okay, you start.  Margins?
\end{dialogue} 
\begin{dialogue}{April}
Left, 1.5 inches.  Right, 1.0
inches.  Top, 1.0 inches to the
body, 0.5 inches to the number.
Bottom, 0.5 to 1.5 inches,
depending on where the page break
comes.
\end{dialogue} 
\end{document}
%</rider>
%\fi
%\iffalse
%<*example>
\documentclass{screenplay}[2006/11/04]

\title{Example .tex File}

\author{John Pate}

\address{the address\\
here if you're\\
going postal\\
UK\\
+44~(0)131~999~9999\\
johnny@dvc.org.uk
}

%% ... preamble finished, let's go ...
\begin{document}

%% Make a title page ...
\coverpage
%% ...or use \nicholl

%% TeX allows quite a lot of leeway in whitespace, so I've messed this
%% up a bit.  I find keeping the format structured helps me a lot tho.
%% Note: but don't have blank lines *inside* the body of text in
%% a dialogue environment.
%% I use vi (Elvis) with macros to make a lot of typing disappear.
%% 
%% Anyhoo, on with the show ... 
%% 
%% for some reason this always happens at the start ...
\fadein

\intslug[illumination]{example sample -- screenplay.cls}


\begin{dialogue}{Bob}
That means that someone
sabotaged the unit and killed the
President! Was it one of us?
\end{dialogue}
\begin{dialogue}{Brown}
Who else is mad but us, Condi\ldots
 \paren{beat}
and Bliar?
\end{dialogue}

Bob buries his head in his hands.
\intercut

\intslug{Atlantis -- somewhere ANyway}

John and Mark are at adjacent consoles. Fred is with them. Tom
is at another console slightly further away.

\begin{dialogue}{John}
The planetoid seems to have a thin crust
covering a nickel-iron core. Could have
been an Earth-like planet at one time.
\end{dialogue}

\begin{dialogue}{Mark}
We're coming up on the radio source now.
\end{dialogue}

Brown walks in and goes to a console.

He has a PARROT on his shoulder.

The Parrot has an air of quiet insouciance.

\begin{dialogue}{Fred}
Switch the visual to main screen so we
can get a good look.\end{dialogue}

They look up at the main screen.

\begin{dialogue}[to John and Mark]{Fred}
Lock on to that.
\dialbreak[to Tom]{Fred}%
Establish planetary orbit.
\end{dialogue}

\intextslug[day]{in or out}
Apparently some people do this.

\extintslug[night]{out or in}
Or even this.

\extslug[day or nite]{NO WARRANTY -- EXPRESS OR IMPLIED}

\pov\ I made the slugline DAY/NIGHT optional 'cause in space no-one can
tell the time.  You probably will need to specify.

Don't put in pagebreaks by hand until you're really, really
finished editing!

%% see what happens if you take out the linebreak
It isn't the done thing to hyphenate for formatting \\
 purposes.
\centretitle{http://dvc.org.uk/sacrific.txt/}

That was a centred titleover.
\begin{titleover}There's a titleover environment for dialogue-like layout if you're
doing the "Star Wars" thing.\end{titleover}\extslug[All Hail Discordia!]{where to find us}
http://dvc.org.uk/sacrific.txt/screenplay.zip

Use the source, Luke.

\extslug[illumination]{for definitive info on layout}

http://www.oscars.org/nicholl/format.html

%% and this always happens at the end ...
\fadeout

\theend

\end{document}
%</example>
%\fi
% \Finale
\endinput