path: root/Master/texmf-dist/doc/latex/spie/article.tex

%  article.tex (Version 2.81, released 24 September 2003)
%  Article to demonstrate format for SPIE Proceedings
%  Special instructions are included in this file after the
%  symbol %>>>>
%  Numerous commands are commented out, but included to show how
%  to effect various options, e.g., to print page numbers, etc.
%  This LaTeX source file is composed for LaTeX2e, 
%  not the older LaTeX version 2.09, as previous versions were.

%  The following commands have been added in the SPIE class 
%  file (spie.cls) and will not be understood in other classes:
%  \supit{}, \authorinfo{}, \skiplinehalf, \keywords{}
%  The bibliography style file is called spiebib.bst, 
%  which replaces the standard style unstr.bst.  

\documentclass[]{spie}  %>>> use for US letter paper
%%\documentclass[a4paper]{spie}  %>>> use this instead for A4 paper
%% \addtolength{\voffset}{9mm}   %>>> moves text field down

%  The following command loads a graphics package to include images 
%  in the document. It may be necessary to specify a DVI driver option,
%  e.g., [dvips], but that may be inappropriate for some LaTeX 
%  installations. 
\usepackage[]{graphicx}

\title{Style template and guidelines for SPIE Proceedings} 

%>>>> The author is responsible for formatting the 
%  author list and their institutions.  Use  \skiplinehalf 
%  to separate author list from addresses and between each address.
%  The correspondence between each author and his/her address
%  can be indicated with a superscript in italics, 
%  which is easily obtained with \supit{}.

\author{Anna A. Author1\supit{a} and Barry B. Author2\supit{b}
\skiplinehalf
\supit{a}Affiliation1, Address, City, Country; \\
\supit{b}Affiliation2, Address, City, Country
}

%>>>> Further information about the authors, other than their 
%  institution and addresses, should be included as a footnote, 
%  which is facilitated by the \authorinfo{} command.

\authorinfo{Further author information: (Send correspondence to A.A.A.)\\A.A.A.: E-mail: aaa@tbk2.edu, Telephone: 1 505 123 1234\\  B.B.A.: E-mail: bba@cmp.com, Telephone: +33 (0)1 98 76 54 32}
%%>>>> when using amstex, you need to use @@ instead of @
 

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% 
%>>>> uncomment following for page numbers
% \pagestyle{plain}    
%>>>> uncomment following to start page numbering at 301 
%\setcounter{page}{301} 
 
  \begin{document} 
  \maketitle 

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% 
\begin{abstract}
This document shows the desired format and appearance of a manuscript prepared for the Proceedings of the SPIE.  It contains general formatting instructions and hints about how to use LaTeX.  The LaTeX source file that produced this document, {\tt article.tex} (Version 2.81), provides a template, which can be used in conjunction with {\tt spie.cls}.  
\end{abstract}

%>>>> Include a list of keywords after the abstract 

\keywords{Manuscript format, template, SPIE Proceedings, LaTeX}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\section{INTRODUCTION}
\label{sect:intro}  % \label{} allows reference to this section

This document shows the desired format and appearance of a manuscript prepared for the Proceedings of the SPIE.\footnote{This format was developed in 1995 by Rick Herman, SPIE, and Ken Hanson, Los Alamos National Laboratory.} It is prepared using LaTeX2e\cite{Lamport94} with the class file {\tt spie.cls}.  The LaTeX source file used to create this document is {\tt article.tex}, which contains important formatting information embedded in it.  These files are available on the Internet at {\tt http://home.lanl.gov/kmh/spie/}.  The font used throughout is the LaTeX default font, Computer Modern Roman, which is equivalent to the Times Roman font available on many systems.  If this font is not available, use a similar serif font.  Normal text has a font size of 10 points\footnote{Font sizes are specified in points, abbreviated pt., which is a unit of length.  One inch = 72.27 pt.; one cm = 28.4 pt.} for which the actual height of a capital E is about 2.4 mm (7 pt.) and the line-to-line spacing is about 4.2 mm (12 pt.).  The font attributes for other parts of the manuscript, summarized in Table~\ref{tab:fonts}, are described in the following sections.  Normal text should be justified to both the left and right margins.  Appendix~\ref{sect:latex} has information about PostScript fonts.

To be properly reproduced in the Proceedings, all text and figures must fit inside a rectangle 6.75-in.\ wide by 8.75-in.\ high or 17.15 cm by 22.23 cm.  The text width and height are set in {\tt spie.cls} to match this requirement.
%% This table is carefully placed in the source file to make 
%% it appear at bottom of page, but above the footnotes.  
%% Use of [h] in following command forces table to appear "here".
\begin{table}[h]
\caption{Fonts sizes to be used for various types of text.  All fonts are Computer Modern Roman or an equivalent.  Table captions should be centered above the table.  When the caption is too long to fit on one line, it should be justified to the right and left margins of the body of the text.} 
\label{tab:fonts}
\begin{center}       
\begin{tabular}{|l|l|} %% this creates two columns
%% |l|l| to left justify each column entry
%% |c|c| to center each column entry
%% use of \rule[]{}{} below opens up each row
\hline
\rule[-1ex]{0pt}{3.5ex}  Article title & 16 pt., bold, centered  \\
\hline
\rule[-1ex]{0pt}{3.5ex}  Author names and affiliations & 12 pt., normal, centered   \\
\hline
\rule[-1ex]{0pt}{3.5ex}  Section heading & 11 pt., bold, centered (all caps)  \\
\hline
\rule[-1ex]{0pt}{3.5ex}  Subsection heading & 11 pt., bold, left justified  \\
\hline
\rule[-1ex]{0pt}{3.5ex}  Sub-subsection heading & 10 pt., bold, left justified  \\
\hline
\rule[-1ex]{0pt}{3.5ex}  Normal text & 10 pt., normal  \\
\hline
\rule[-1ex]{0pt}{3.5ex}  Figure and table captions & \, 9 pt., normal \\
\hline
\rule[-1ex]{0pt}{3.5ex}  Footnote & \, 9 pt., normal \\
\hline 
\end{tabular}
\end{center}
\end{table} 
The text should begin 1.00 in.\ or 2.54 cm from the top of the page.  The right and left margins should be 0.875~in.\ or 2.22 cm for US letter-size paper (8.5 in.\ by 11 in.) or 1.925 cm for A4 paper (210 mm by 297 mm) to horizontally center the text on the page.  See Appendix~\ref{sect:latex} for guidance regarding paper-size specification. 

Authors are encouraged to follow the principles of sound technical writing, as described in Ref.~\citenum{Eisenberg92}, for example.  Many aspects of technical writing are addressed in the {\em AIP Style Manual}, published by the American Institute of Physics.  It is available on line at {\tt http://www.aip.org/pubservs/style/4thed/toc.html}.  Good English usage is essential.  A spelling checker is helpful for finding misspelled words. 

An author may use this LaTeX source file as a template by substituting his/her own text in each field.  This document is not meant to be a complete guide on how to use LaTeX.  For that, refer to books on LaTeX usage, such as the definitive work by Lamport\cite{Lamport94} or the very useful compendium by Goossens et al.\cite{Goossens97}

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\section{PARTS OF MANUSCRIPT} 

This section describes the normal structure of a manuscript and how each part should be handled.  The appropriate vertical spacing between various parts of this document is achieved in LaTeX through the proper use of defined constructs, such as \verb|\section{}|.  In LaTeX, paragraphs are separated by blank lines in the source file. 

At times it may be desired, for formatting reasons, to break a line without starting a new paragraph.  This situation may occur, for example, when formatting the article title, author information, or section headings.  Line breaks are inserted in LaTeX by entering \verb|\\| or \verb|\linebreak| in the LaTeX source file at the desired location.  

%%%%%Sometimes it is necessary to precede the double slash 
%%%%%by \verb|\protect| to get the desired result, 
%%%%%for example, in article titles.

%%-----------------------------------------------------------
\subsection{Title and Author Information} 
\label{sect:title}

The article title appears centered at the top of the first page.  The title font is 16 point, bold.  The rules for capitalizing the title are the same as for sentences; only the first word, proper nouns, and acronyms should be capitalized.  Avoid using acronyms in the title, unless they are widely understood.  Consider the possibility that people outside your area of expertise might read your article.  Appendix~\ref{sect:misc} contains more about acronyms.

The list of authors immediately follows the title after a blank vertical space of about 7 mm.  The font is 12 point, normal with each line centered.  The authors' affiliations and addresses follow the author list after another blank space of about 4 mm, also in 12-point, normal font and centered.  Do not use acronyms in affiliations and addresses. For multiple affiliations, each affiliation should appear on a new line, separated from the following address by a semicolon.  Italicized superscripts may be used to identify the correspondence between the authors and their respective affiliations.  Further author information, such as e-mail address, complete postal address, and web-site location, may be provided in a footnote by using \verb|\authorinfo{}|, as demonstrated above.

When the abbreviated title or author information is too long to fit on one line, multiple lines may be used; insert line breaks appropriately to achieve a visually pleasing format.  The proper spacing of one and one-half lines between the title, author list, and their affiliations is achieved with the LaTeX command \verb|\skiplinehalf| defined in {\tt spie.cls}.

%%-----------------------------------------------------------
\subsection{Abstract and Keywords} 
The title and author information is immediately followed by the Abstract. The Abstract should concisely summarize the key findings of the paper.  It should consist of a single paragraph containing no more than 200 words.  The Abstract does not have a section number.  A list of up to ten keywords should immediately follow the Abstract after a blank line.  These keywords will be included in a searchable database at SPIE.

%%-----------------------------------------------------------
\subsection{Body of Paper} 
The body of the paper consists of numbered sections that present the main findings.  These sections should be organized to best present the material.  See Sect.~\ref{sect:sections} for formatting instructions.

%%-----------------------------------------------------------
\subsection{Appendices} 
Auxiliary material that is best left out of the main body of the paper, for example, derivations of equations, proofs of theorems, and details of algorithms, may be included in appendices.  Appendices are enumerated with upper-case Latin letters in alphabetic order, and appear just before the Acknowledgments and References.

%%-----------------------------------------------------------
\subsection{Acknowledgments} 
In the Acknowledgments section, appearing just before the References, the authors may credit others for their guidance or help.  Also, funding sources may be stated.  The Acknowledgments section does not have a section number.

%%-----------------------------------------------------------
\subsection{References} 
The References section lists books, articles, and reports that are cited in the paper.  It does not have a section number.  The references are numbered in the order in which they are cited.  Examples of the format to be followed are given at the end of this document.  

The reference list at the end of this document is created using BibTeX, which looks through the file {\tt report.bib} for the entries cited in the LaTeX source file.  The format of the reference list is determined by the bibliography style file {\tt spiebib.bst}, as specified in the \verb|\bibliographystyle{spiebib}| command.  Alternatively, the references may be directly formatted in the LaTeX source file.

For books\cite{Lamport94,Eisenberg92,Gelman95,Goossens97} the listing includes the list of authors, book title (in italics), page or chapter numbers, publisher, city, and year of publication.  A reference to a journal article\cite{Metropolis53} includes the author list, title of the article (in quotes), journal name (in italics, properly abbreviated), volume number (in bold), inclusive page numbers, and year.  By convention\cite{Lamport94}, article titles are capitalized as described in Sect.~\ref{sect:title}.  A reference to a proceedings paper or a chapter in an edited book\cite{Gull89a} includes the author list, title of the article (in quotes), conference name (in italics), if appropriate, editors, volume or series title (in italics), volume number (in bold), if applicable, inclusive page numbers, publisher, city, and year.  References to an article in the SPIE Proceedings may include the conference name, as shown in Ref.~\citenum{Hanson93c}.

Citations to the references are made using superscript numerals, as demonstrated in the preceding paragraph.  One may also directly refer to a reference within the text, e.g., ``as shown in Ref.~\citenum{Metropolis53} ..." Footnotes\footnote{Footnotes are indicated as superscript symbols to avoid confusion with citations.} may be used to provide auxiliary information that doesn't need to appear in the text, e.g., to explain measurement units.  They should be used sparingly, however.  Since only nine symbols are available, you may need to restart the sequence with the first sybmol using the command  \verb|\footnote[1]{Your footnote text goes here.}|.

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\section{SECTION FORMATTING} \label{sect:sections}

Section headings are centered and formatted completely in upper-case 11-point bold font.  Sections should be numbered sequentially, starting with the first section after the Abstract.  The heading starts with the section number, followed by a period.  In LaTeX, a new section is created with the \verb|\section{}| command, which automatically numbers the sections.

Paragraphs that immediately follow a section heading are leading paragraphs and should not be indented, according to standard publishing style\cite{Lamport94}.  The same goes for leading paragraphs of subsections and sub-subsections.  Subsequent paragraphs are standard paragraphs, with 14-pt.\ (5 mm) indentation.  An extra half-line space should be inserted between paragraphs.  In LaTeX, this spacing is specified by the parameter \verb|\parskip|, which is set in {\tt spie.cls}.  Indentation of the first line of a paragraph may be avoided by starting it with \verb|\noindent|.
 
%%-----------------------------------------------------------
\subsection{Subsection Attributes} 

The subsection heading is left justified and set in 11-point, bold font.  Capitalization rules are the same as those for book titles.  The first word of a subsection heading is capitalized.  The remaining words are also capitalized, except for minor words with fewer than four letters, such as articles (a, an, and the), short prepositions (of, at, by, for, in, etc.), and short conjunctions (and, or, as, but, etc.).  Subsection numbers consist of the section number, followed by a period, and the subsection number within that section, followed by a period.  

%%-----------
\subsubsection{Sub-subsection attributes} 
The sub-subsection heading is left justified and its font is 10 point, bold.  Capitalize as for sentences.  The first word of a sub-subsection heading is capitalized.  The rest of the heading is not capitalized, except for acronyms and proper names.  

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\section{FIGURES AND TABLES} 

Figures are numbered in the order of their first citation.  They should appear in numerical order and on or after the same page as their first reference in the text.  Alternatively, all figures may be placed at the end of the manuscript, that is, after the Reference section.  It is preferable to have figures appear at the top or bottom of the page.  Figures, along with their captions, should be separated from the main text by at least 0.2 in.\ or 5 mm.  

Figure captions are centered below the figure or graph.  Figure captions start with the figure number in 9-point bold font, followed by a period; the text is in 9-point normal font; for example, ``{\footnotesize{\bf Figure 3.}  Original image...}".  See Fig.~\ref{fig:example} for an example of a figure caption.  When the caption is too long to fit on one line, it should be justified to the right and left margins of the body of the text.  

Tables are handled identically to figures, except that their captions appear above the table. 
%%  Use following command to specify that graphics file is in 
%%  a directory other than this LaTeX source file.
%%  Note use of / to separate subdirectories, for UNIX and Windows OS.
%%\graphicspath{{H:/HANSON/SPIESTY/}}  
%-------------
   \begin{figure}
   \begin{center}
   \begin{tabular}{c}
   \includegraphics[height=7cm]{mcr3b.eps}
   \end{tabular}
   \end{center}
   \caption[example] 
%>>>> use \label inside caption to get Fig. number with \ref{}
   { \label{fig:example} 
Figure captions are used to label the figure and help the reader understand the figure's significance.  The caption should be centered underneath the figure and set in 9-point font.  It is preferable for figures and tables to be placed at the top or bottom of the page. LaTeX tends to adhere to this standard.}
   \end{figure} 
%-------------

{F}or further details concerning the inclusion of grayscale and color images, consult the {\it Author Guide for Publication and Presentation} supplied to authors by SPIE or SPIE's web page on manuscript preparation.
 
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\appendix    %>>>> this command starts appendixes
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\section{MISCELLANEOUS FORMATTING DETAILS} \label{sect:misc}

It is often useful to refer back (or forward) to other sections in the article.  Such references are made by section number.  When a section reference starts a sentence, Section is spelled out; otherwise use its abbreviation, for example, ``In Sect.~2 we showed..." or ``Section~2.1 contained a description...".  References to figures, tables, and theorems are handled the same way.

At the first occurrence of an acronym (unless it is widely known, such as MTF, CCD, FFT), spell it out, followed by the acronym in parentheses, e.g., noise power spectrum (NPS).  
 
%%-----------------------------------------------
\subsection{Formatting Equations} 
Equations may appear in line with the text, if they are simple, short, and not of major importance; e.g., $\beta = b/r$.  Important equations appear on their own line.  Such equations are centered.  For example, ``The expression for the minus-log-posterior is
	\begin{equation}
	\label{eq:alpha}
\phi = |{\rm\bf y} - {\rm\bf A}{\rm\bf x}|^2 + \alpha \log p({\rm\bf x}) \, ,
	\end{equation}
where $\alpha$ determines the strength of ..."  Principal equations are numbered, with the equation number placed within parentheses and right justified.  

Equations are considered to be part of a sentence and should be punctuated accordingly. In the above example, a comma follows the equation because the next line is a subordinate clause.  If the equation ends the sentence, a period should follow the equation.  The line following an equation should not be indented unless it is meant to start a new paragraph.  Indentation after an equation is avoided in LaTeX by not leaving a blank line between the equation and the subsequent text.

References to equations include the equation number in parentheses, for example, ``Equation~(\ref{eq:alpha}) shows ..." or ``Combining Eqs.~(2) and (3), we obtain..."  Using a tilde in the LaTeX source file avoids unwanted line breaks.

%%-----------------------------------------------------------
\subsection{Formatting Theorems} 

To include theorems in a formal way, the theorem identification should appear in a 10-point, bold font, left justified and followed by a period.  The text of the theorem continues on the same line in normal, 10-point font.  For example, 

\noindent{\bf Theorem 1.} For any unbiased estimator...

Formal statements of lemmas and algorithms receive a similar treatment.

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\section{SOME LATEX GUIDANCE} \label{sect:latex}

SPIE has had a number of problems with manuscripts submitted electronically as PostScript (PS) files that were prepared by LaTeX.  The major problem has been incorrect margins at the top of each page, which seems to be related to the document's paper size. The paper size is set at two separate places in the process of creating a PS file.  The first step in this process is to run {\tt latex} on the LaTeX source file, together with the class file {\tt spie.cls}.  The default in {\tt article.cls}, on which {\tt spie.cls} is based, is USA letter paper.  To format a document for A4 paper, the first line of the LaTeX source file should be \verb|\documentclass[a4paper]{spie}|.   

The output of the LaTeX utility is a file with the extension DVI (for Device Independent), which encodes the formatted document.  The application DVIPS is typically used to convert the DVI file to a PS file.  DVIPS has its own default paper size, which can be overridden with the option ``{\tt -t letter}" or ``{\tt -t a4}".  
If the foregoing steps do not produce the correct top margin, you can lower the text on the page (by 9 mm) with the command \verb|\addtolength{\voffset}{9mm}|, placed right after the \verb|\documentclass| command.

Another DVIPS option specifies the incorporation of (scalable) PostScript Type 1 fonts in its output PS file. This feature is important for obtaining a subsequent PDF file that will be clearly displayed on a computer monitor by Adobe Acrobat Reader.  The option ``{\tt -P pdf}" makes DVIPS include these fonts in its output PS file.

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
\acknowledgments     %>>>> equivalent to \section*{ACKNOWLEDGMENTS}       
 
This unnumbered section is used to identify those who have aided the authors in understanding or accomplishing the work presented and to acknowledge sources of funding.  

%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%%%%% References %%%%%

\bibliography{report}   %>>>> bibliography data in report.bib
\bibliographystyle{spiebib}   %>>>> makes bibtex use spiebib.bst

\end{document}