path: root/Master/texmf-dist/doc/latex/jamtimes/jamtimes.dtx

% \iffalse
% $Id: jamtimes.dtx,v 1.26 2010-09-16 02:32:45 boris Exp $
%
% Copyright (c) 2010, Boris Veytsman
%
% All rights reserved.
%
% Redistribution and use in source and binary forms, with or without
% modification, are permitted provided that the following conditions
% are met: 
%
%    * Redistributions of source code must retain the above copyright
%    notice, this list of conditions and the following disclaimer. 
%    * Redistributions in binary form must reproduce the above
%    copyright notice, this list of conditions and the following
%    disclaimer in the documentation and/or other materials provided
%    with the distribution. 
%    * Neither the name of the original author nor the names of the
%    contributors may be used to endorse or promote products derived
%    from this software without specific prior written permission. 
%
% THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
% CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
% INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
% MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
% DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS
% BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,
% EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
% TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
% DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
% ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
% OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY
% OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
% POSSIBILITY OF SUCH DAMAGE.
%
% \fi 
% \CheckSum{686}
%
%
%% \CharacterTable
%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
%%   Digits        \0\1\2\3\4\5\6\7\8\9
%%   Exclamation   \!     Double quote  \"     Hash (number) \#
%%   Dollar        \$     Percent       \%     Ampersand     \&
%%   Acute accent  \'     Left paren    \(     Right paren   \)
%%   Asterisk      \*     Plus          \+     Comma         \,
%%   Minus         \-     Point         \.     Solidus       \/
%%   Colon         \:     Semicolon     \;     Less than     \<
%%   Equals        \=     Greater than  \>     Question mark \?
%%   Commercial at \@     Left bracket  \[     Backslash     \\
%%   Right bracket \]     Circumflex    \^     Underscore    \_
%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
%%   Right brace   \}     Tilde         \~} 
%
%\iffalse
% Taken from xkeyval.dtx
%\fi
%\makeatletter
%\def\DescribeOption#1{\leavevmode\@bsphack
%              \marginpar{\raggedleft\PrintDescribeOption{#1}}%
%              \SpecialOptionIndex{#1}\@esphack\ignorespaces}
%\def\PrintDescribeOption#1{\strut\emph{option}\\\MacroFont #1\ }
%\def\SpecialOptionIndex#1{\@bsphack
%    \index{#1\actualchar{\protect\ttfamily#1}
%           (option)\encapchar usage}%
%    \index{options:\levelchar#1\actualchar{\protect\ttfamily#1}\encapchar
%           usage}\@esphack}
%\def\DescribeOptions#1{\leavevmode\@bsphack
%  \marginpar{\raggedleft\strut\emph{options}%
%  \@for\@tempa:=#1\do{%
%    \\\strut\MacroFont\@tempa\SpecialOptionIndex\@tempa
%  }}\@esphack\ignorespaces}
%\makeatother
%
%
% \MakeShortVerb{|}
% \GetFileInfo{jamtimes.dtx}
% \title{Expanded Times Roman Fonts As Used in 
%   \emph{Journal d'Analyse Math\'ematique}}
% \author{Boris Veytsman\thanks{%
% \href{mailto:borisv@lk.net}{\texttt{borisv@lk.net}},
% \href{mailto:boris@varphi.com}{\texttt{boris@varphi.com}}}} 
% \date{\filedate, \fileversion}
% \maketitle
% \begin{abstract}
%   This package provides \LaTeX{} support for expanded Times Roman
%   font, which has been used by \emph{Journal d'Analyse
%     Math\'ematique} for many years.  Mathematics support is based on
%   \emph{Belleek} fonts.
% \end{abstract}
% \tableofcontents
%
% \changes{v1.0}{2009/10/12}{First fully functional version} 
% \changes{v1.2a}{2010/04/22}{Documentation update} 
% \changes{v1.3}{2010/05/07}{Corrected map entries} 
% \changes{v1.5}{2010/05/31}{Added symbols missing from the Belleek
% fonts} 
% \changes{v1.6}{2010/06/22}{Documentation changes} 
% \changes{v1.7}{2010/07/08}{Uppercase upright Greek} 
% \changes{v1.7}{2010/07/28}{Documentation changes} 
% \changes{v1.9}{2010/09/15}{Fixed a bug in installation script} 
%
% \section{Introduction}
% \label{sec:intro}
% 
% For about a decade \emph{Journal d'Analyse Math\'ematique}
% (\url{http://www.ma.huji.ac.il/jdm/}) used a set of fonts based on
% the well known Times Roman family\footnote{It is now difficult to
%   say who designed these fonts initially.  Dov Goldstein supported
%   the fonts for a number of years.}.  The fonts were slightly
% expanded in the $x$ direction.  This small change gave the journal
% its unique look and feel.  The fonts worked for many years.
% However, over this time a number of problems turned up:
% \begin{enumerate}
% \item The fonts were originally created for |dvips| and included
% some PostScript trickery (for example, in dotless $\jmath$).  This
% made their use with |pdftex| difficult.
% \item The fonts included only |OT1| encoding.
% \item The math was based on the combination of Times Roman
% \emph{and} Computer Modern for the symbols absent in Times Roman.
% These fonts do not mesh well.  Later the journal tried to use just
% Computer Modern math throughout, which still contrasted with the
% body text.
% \item It was considered beneficial to give the authors the option of
% prepare their papers with the journal fonts, and the package lacked
% documentation and installation instruction.
% \end{enumerate}
% At last \emph{Magnes Press,} the publisher of \emph{Journal
%   d'Analyse Math\'ematique,} commissioned the overhaul of the
% journal \TeX{} styles.  This package is a part of the effort.
%
% We recreate the fonts from scratch.  The mathematics is based on
% Belleek fonts~\cite{Kinch98:Belleek}, expanded to match the body.
% The text fonts are provided in |OT1| and |T1| encoding.  
%
%
% The package works both with the |pdflatex| route and the
% |latex|$to$|dvips| route.  The files |textsample.pdf|,
% |mathsample.pdf| and |textsample_ps.pdf|, |mathsample_ps.pdf|
% provide the sample of output for these two routes.  
%
%\section{User Guide}
%\label{sec:userguide}
%
%
%\subsection{Installation}
%\label{sec:install}
%
% You need Belleek fonts~\cite{Kinch98:Belleek} and (optionally) Math
% Design fonts~\cite{Pichaureau05:MathDesign}.  They are now a part
% of most modern distributions.  If you do not have them, just
% download them from CTAN.  
%
% Download the file 
% \url{http://ctan.tug.org/install/fonts/psfonts/public/jamstimes.tds.zip} 
% and unzip it in the \path{$TEXMF} directory. For \TeX Live it is
% probably \path{/usr/local/texlive/texmf-local}, or
% \path{/usr/local/share/texmf-local}, or \path{~/texmf}, or
% \path{C:\Program Files\texlive\texmf-local}, etc.  For Mik\TeX{} it
% is probably \path{C:\miktex\texmf} or \path{C:\miktex\localtexmf}.
% Run |texhash| to update the database of file names.  
% 
% Now you need to add the map file |jtm.map| to the configuration files
% of |dvips| and |pdftex|.  This again depends on your
% distribution. For \TeX Live you create a file
% \path{$TEXMF/updmap.d/50jtm.cfg} with just the line
% \begin{verbatim}
% Map jtm.map
% \end{verbatim}
% and then run |texhash| and |updmap|.  If you use Debian or Ubuntu,
% the system-wide |updmap.d| directory is located in |/etc|, and you
% need to create the file |jtm.list| in
% \path{/var/lib/tex-common/fontmap-cfg/whitnca.list} with the line
% \begin{verbatim}
% 50jtm
% \end{verbatim}
%
%
% If you use Mik\TeX2.6, run
% \begin{verbatim}
% initexmf --edit-config-file updmap  
% \end{verbatim}
% Add to the config file
% \begin{verbatim}
%  Map jtm.map
% \end{verbatim}
% save, exit and run |updmap|. 
% 
% If you use Mik\TeX2.5 or earlier, edit
% \path{localtexmf\web2c\updmap.cfg}, adding the line
% \begin{verbatim}
% Map jtm.map
% \end{verbatim}
% and run |updmap|.
%
% Refer to your distribution documentation for the details.
%
%
% An interesting question: it is possible to use the package with the
% commercial MathTime\textsuperscript{\texttrademark} fonts from
% PC\TeX{} (\url{http://www.pctex.com/})?  I think that the answer is
% positive, but since I do not have these fonts, I have not tested
% this setup.  If you have them, just change the lines in the file
% |jtm.map| to refer to the proper fonts.  Note that these fonts have
% some options (bold math, heavy math) not supported by the package.
%
%\subsection{Usage}
%\label{sec:usage}
%
% If your installation have been successful, add  the line
% \begin{quote}
% |\usepackage|\oarg{options}\marg{jamtimes}  
% \end{quote}
% to the preamble of your document. Note that this package changes
% both math and text fonts.
%
% The package provides a number of options.  The default values of the
% options correspond to the practice of \emph{Journal d'Analyse
%   Math\'ematique.}  You can try to change them to get a different
%   look and feel.
%
%
% \DescribeOption{scaled}
% The package has the option |scaled=...|.  The fonts are uniformly
% scaled  according to the numerical value of the option.  By default
% the fonts are scaled 5\%, as if the setting |scaled=1.05| is in
% effect.  If you do not want to scale 
% the fonts at all, just call the package with the option |scaled=1|.
% 
%
% \DescribeOptions{sffamily,ttfamily}
% By default the package uses Helvetica as the sans serif font and
% Courier as the monospaced font.  This default can be changed with
% the options |sffamily=...| (the default value is |phv|) and
% |ttfamily=...| (the default value is |pcr|).  
%
% \DescribeOption{sfscaled}
% If the sans serif family is Helvetica, the package provides an
% additional options |sfscaled=...|.  It sets the  scaling
% of the sans serif fonts.  By default it is 0.94:  this provides a
% good mesh with 5\% scaled Times fonts.
%
% \DescribeOption{amsfontsscaled}
% The package automatically loads  amsfonts, including Euler Script,
% and Euler Fraktur fonts.  The option |amsfontsscaled=...| provides a
% way to change the scaling of these fonts.  By default they are
% scaled 5\%, just as the body and main math fonts.
%
%
% The package provides the fonts listed in Table~\ref{tab:fonts}.
% Note that the expansion mentioned there always means expansion along
% the horizontal axis \emph{in addition} to the scaling set by the
% package options.
%
% \DescribeMacro{\bfdefault}
% Another notable detail is that usually \LaTeX{} sets |\bfdefault| to
% be |bx| (bold extended), and most font packages substitute it to |b|
% (bold).  Our fonts have both bold and bold extended fonts, and by
% default use bold extended fonts for |\bfdefault|.  If you want to
% use bold extended fonts instead, just say
% \begin{quote}
%   |\renewcommand{\bdefault}{b}|
% \end{quote}
% 
%
% \begin{table}
%   \begin{minipage}{\linewidth}
%     \renewcommand{\thefootnote}{\thempfootnote}
%     \centering
%     \caption{Fonts Provided by the Package.  \texttt{EE} corresponds
%       to font encoding (see~\cite{fontname}).}
%     \label{tab:fonts}
%     \begin{tabular}{llp{2.2in}}
%       \toprule
%       NFSS Code & Fontname Name  & Comments\\
%       \midrule
%       \emph{c, n} & |jtmrEEc| & Times Roman, compressed 20\%\\
%       \emph{m, n} & |jtmrEEe| & Times Roman, expanded 5\%\\
%       \emph{m, it} & |jtmriEEe| & Times Roman Italic, expanded 5\%\\
%       \emph{m, sl} & |jtmroEEe| & (fake) Times Roman Oblique,
%       expanded 5\%\\ 
%       \emph{m, sc} & |jtmrcEEe| & (fake) Small Caps Times Roman,
%       expanded 5\%\\ 
%       \emph{b, n} & |ptmbEE|\footnote{These fonts coincide with the
%       standard Times fonts} & Times Bold\\
%       \emph{b, it} & |ptmbiEE|\footnotemark[1] & Times Bold Italic\\
%       \emph{b, sl} & |ptmboEE|\footnotemark[1] & (fake) Times Bold Oblique\\
%       \emph{b, sc} & |ptmbcEE|\footnotemark[1] & (fake) small caps Times Bold\\ 
%       \emph{x, n} & |jtmrEEw| & Times Roman, expanded 25\%\\
%       \emph{x, it} & |jtmriEEw| & Times Roman Italic, expanded 25\%\\
%       \emph{x, sl} & |jtmroEEw| & (fake) Times Roman Oblique,
%       expanded 25\%\\ 
%       \emph{x, sc} & |jtmrcEEw| & (fake) Small Caps Times Roman,
%       expanded 25\%\\ 
%       \emph{bx, n} & |jtmbEEv| & Times Bold, expanded 15\%\\
%       \emph{bx, it} & |jtmbiEEv| & Times Bold Italic, expanded 15\%\\
%       \emph{bx, sl} & |jtmboEEv| & (fake) Times Bold Oblique, expanded
%       15\%\\
%       \emph{bx, sc} & |jtmbcEEv| & (fake) small caps Times Bold,
%       expanded 15\%\\ 
%       \bottomrule
%     \end{tabular}
%   \end{minipage}
% \end{table}
% 
%
%
%
% \StopEventually{
%   \clearpage
% \paragraph{Acknowledgements}
%
% This package was commissioned by \emph{Magnes Press,}
% \url{http://www.magnespress.co.il}. I am greatly indebted to Eva
% Goldman for the patient testing of the fonts.
%
%   \bibliography{jamtimes}
%   \bibliographystyle{unsrt}}
%
% \clearpage
%\section{Implementation}
%\label{sec:impl}
%
%\subsection{Identification}
%\label{sec:ident}
%
% We start with the declaration who we are.  Most |.dtx| files put
% driver code in a separate driver file |.drv|.  We roll this code into the
% main file, and use the pseudo-guard |<gobble>| for it.
%    \begin{macrocode}
%<style>\NeedsTeXFormat{LaTeX2e}
%<*gobble>
\ProvidesFile{jamtimes.dtx}
%</gobble>
%<style>\ProvidesClass{jamtimes}
%<drv>\ProvidesFile{drv.tex}
%<map>\ProvidesFile{map.tex}
%<jamomlhax>\ProvidesMtxPackage{jamomlhax.mtx}
%<*style|drv|map>
[2010/09/15 v1.9 Expanded Times Fonts (Journal d'Analyse Mathematique)]
%</style|drv|map>
%    \end{macrocode}
% And the driver code:
%    \begin{macrocode}
%<*gobble>
\documentclass{ltxdoc}
\usepackage{booktabs}
\usepackage[tableposition=top]{caption}
\usepackage{url}
\usepackage[breaklinks,colorlinks,linkcolor=black,citecolor=black,
            pagecolor=black,urlcolor=black,hyperindex=false]{hyperref}
\PageIndex
\CodelineIndex
\RecordChanges
\EnableCrossrefs
\begin{document}
  \DocInput{jamtimes.dtx}
\end{document}
%</gobble> 
%    \end{macrocode}
%
%\subsection{Fontinst Driver}
%\label{sec:pnb-drv}
%
% This follows~\cite{fontinstallationguide}.
% 
% First, the preamble
%    \begin{macrocode}
%<*drv>
\input fontinst.sty
%    \end{macrocode}
%
% Definition of the parameters
%    \begin{macrocode}
\setint{slant}{167}
\setint{smallcapsscale}{750}
\setint{compressedscale}{800}
\setint{extendedscale}{1050}
\setint{extraextendedscale}{1150}
\setint{widescale}{1250}
%    \end{macrocode}
%
% Starting recording transforms:
%    \begin{macrocode}
\recordtransforms{rec.tex}
%    \end{macrocode}
%
% Scale all text fonts in the |8r| encoding.  Interesting enough, Dov
% preferred medium fonts to be extended comparing to the bold ones.
% We preserve this choice.
%    \begin{macrocode}
\transformfont{jtmr8rc}{\xscalefont{\int{compressedscale}}%
  \reencodefont{8r}{\fromafm{ptmr8a}}}
\transformfont{jtmr8re}{\xscalefont{\int{extendedscale}}%
  \reencodefont{8r}{\fromafm{ptmr8a}}}
\transformfont{jtmri8re}{\xscalefont{\int{extendedscale}}%
  \reencodefont{8r}{\fromafm{ptmri8a}}}
\transformfont{jtmro8re}{\slantfont{\int{slant}}%
  \fromany{jtmr8re}}
\transformfont{jtmr8rw}{\xscalefont{\int{widescale}}%
  \reencodefont{8r}{\fromafm{ptmr8a}}}
\transformfont{jtmri8rw}{\xscalefont{\int{widescale}}%
  \reencodefont{8r}{\fromafm{ptmri8a}}}
\transformfont{jtmro8rw}{\slantfont{\int{slant}}%
  \fromany{jtmr8rw}}
\transformfont{jtmb8rv}{\xscalefont{\int{extraextendedscale}}%
  \reencodefont{8r}{\fromafm{ptmb8a}}}
\transformfont{jtmbi8rv}{\xscalefont{\int{extraextendedscale}}%
  \reencodefont{8r}{\fromafm{ptmbi8a}}}
\transformfont{jtmbo8rv}{\slantfont{\int{slant}}%
  \fromany{jtmb8rv}}
%    \end{macrocode}
% 
% Same with math fonts.  Note that Dov wanted medium weight
% mathematical fonts \emph{not} extended.  We reverse this decision.
% Note that |rblmi| does not have non-Greek letters, so we call its
% encoding |7z| instead of |7m|
%    \begin{macrocode}
%\transformfont{jtmr7voe}{\fromafm{blex}}
\transformfont{jtmr7yoe}{\xscalefont{\int{extendedscale}}\fromafm{blsy}}
\transformfont{jtmri7ze}{\xscalefont{\int{extendedscale}}\fromafm{rblmi}}
%    \end{macrocode}
% 
%
% There is no hook in |fontinst.sty| for writing our own preamble to
% |.fd| file.  However, we need to add scaling commands to the
% preamble. OK, we will patch fontinst:
%    \begin{macrocode}
\fontinstcc
\def\fd_family#1#2#3{
   \a_toks{#3}
   \edef\lowercase_file{\lowercase{
     \edef\noexpand\lowercase_file{#1#2.fd}}}
   \lowercase_file
   \open_out{\lowercase_file}
   \out_line{\percent_char~Filename:~\lowercase_file}
   \out_line{\percent_char~Created~by:~tex~\jobname}
   \out_line{\percent_char~Created~using~fontinst~v\fontinstversion}
   \out_line{}
   \out_line{\percent_char~THIS~FILE~SHOULD~BE~PUT~IN~A~TEX~INPUTS~
      DIRECTORY}
   \out_line{}
   \out_line{\string\ProvidesFile{\lowercase_file}}
   \out_lline{[
      \the\year/
      \ifnum10>\month0\fi\the\month/
      \ifnum10>\day0\fi\the\day\space
      Fontinst~v\fontinstversion\space
      font~definitions~for~#1/#2.
   ]}
   \out_line{}
%    \end{macrocode}
% Here is our patch:
%    \begin{macrocode}
   \out_line{\string\expandafter\string\ifx\string\csname\space
     Jtms@scale\string\endcsname\string\relax}
   \out_line{\space\string\let\string\Jtms@@scale\string\@empty}
   \out_line{\string\else}
   \out_line{\space\string\edef\string\Jtms@@scale\left_brace_char 
       s*[\string\csname\space Jtms@scale\string\endcsname]
       \right_brace_char\percent_char}
   \out_line{\string\fi\percent_char}
   \out_line{}
%    \end{macrocode}
% End of the patch.
%    \begin{macrocode}
   \out_line{\string\DeclareFontFamily{#1}{#2}{\the\a_toks}}
   {
      \csname #1-#2\endcsname
      \out_line{}
      \let\do_shape=\substitute_shape
      \csname #1-#2\endcsname
      \let\do_shape=\remove_shape
      \csname #1-#2\endcsname
   }
   \x_cs\g_let{#1-#2}\x_relax
   \out_line{}
   \out_line{\string\endinput}
   \close_out{Font~definitions}
}
\normalcc
%    \end{macrocode}
% 
% Now we are ready to install fonts.  Note that bold fonts here are
% not extended, so we use standard Times fonts for bold.
% 
% First, |OT1|:
%    \begin{macrocode}
\installfonts
\installfamily{OT1}{jtm}{\skewchar\font=127}
\installfont{jtmr7tc}{jtmr8rc,jtmri7ze,newlatin,jamot1hax}{ot1}{OT1}{jtm}{c}{n}{
  <->\string\Jtms@@scale}
\installfont{jtmr7te}{jtmr8re,jtmri7ze,newlatin,jamot1hax}{ot1}{OT1}{jtm}{m}{n}{
  <->\string\Jtms@@scale}
\installfont{jtmri7te}{jtmri8re,jtmri7ze,newlatin,jamot1hax}{ot1}{OT1}{jtm}{m}{it}{
  <->\string\Jtms@@scale}
\installfont{jtmro7te}{jtmro8re,jtmri7ze,newlatin,jamot1hax}{ot1}{OT1}{jtm}{m}{sl}{
  <->\string\Jtms@@scale}
\installfont{jtmrc7te}{jtmr8re,jtmri7ze,newlatin,jamot1hax}{ot1c}{OT1}{jtm}{m}{sc}{
  <->\string\Jtms@@scale}
\installfontas{ptmb7t}{OT1}{jtm}{b}{n}{
  <->\string\Jtms@@scale}
\installfontas{ptmbi7t}{OT1}{jtm}{b}{it}{
  <->\string\Jtms@@scale}
\installfontas{ptmbo7t}{OT1}{jtm}{b}{sl}{
  <->\string\Jtms@@scale}
\installfontas{ptmbc7t}{OT1}{jtm}{b}{sc}{
  <->\string\Jtms@@scale}
\installfont{jtmr7tw}{jtmr8rw,jtmri7ze,newlatin,jamot1hax}{ot1}{OT1}{jtm}{x}{n}{
  <->\string\Jtms@@scale}
\installfont{jtmri7tw}{jtmri8rw,jtmri7ze,newlatin,jamot1hax}{ot1}{OT1}{jtm}{x}{it}{
  <->\string\Jtms@@scale}
\installfont{jtmro7tw}{jtmro8rw,jtmri7ze,newlatin,jamot1hax}{ot1}{OT1}{jtm}{x}{sl}{
  <->\string\Jtms@@scale}
\installfont{jtmrc7tw}{jtmr8rw,jtmri7ze,newlatin,jamot1hax}{ot1c}{OT1}{jtm}{x}{sc}{
  <->\string\Jtms@@scale}
\installfont{jtmb7tv}{jtmb8rv,jtmri7ze,newlatin,jamot1hax}{ot1}{OT1}{jtm}{bx}{n}{
  <->\string\Jtms@@scale}
\installfont{jtmbi7tv}{jtmbi8rv,jtmri7ze,newlatin,jamot1hax}{ot1}{OT1}{jtm}{bx}{it}{
  <->\string\Jtms@@scale}
\installfont{jtmbo7tv}{jtmbo8rv,jtmri7ze,newlatin,jamot1hax}{ot1}{OT1}{jtm}{bx}{sl}{
  <->\string\Jtms@@scale}
\installfont{jtmbc7tv}{jtmb8rv,jtmri7ze,newlatin,jamot1hax}{ot1c}{OT1}{jtm}{bx}{sc}{
  <->\string\Jtms@@scale}
%    \end{macrocode}
% 
% Then |T1|
%    \begin{macrocode}
\installfamily{T1}{jtm}{}
\installfont{jtmr8tc}{jtmr8rc,jtmri7ze,newlatin}{t1}{T1}{jtm}{c}{n}{
  <->\string\Jtms@@scale}
\installfont{jtmr8te}{jtmr8re,jtmri7ze,newlatin,jtmri7ze}{t1}{T1}{jtm}{m}{n}{
  <->\string\Jtms@@scale}
\installfont{jtmri8te}{jtmri8re,jtmri7ze,newlatin,jtmri7ze}{t1}{T1}{jtm}{m}{it}{
  <->\string\Jtms@@scale}
\installfont{jtmro8te}{jtmro8re,jtmri7ze,newlatin}{t1}{T1}{jtm}{m}{sl}{
  <->\string\Jtms@@scale}
\installfont{jtmrc8te}{jtmr8re,jtmri7ze,newlatin}{t1c}{T1}{jtm}{m}{sc}{
  <->\string\Jtms@@scale}
\installfontas{ptmb8t}{T1}{jtm}{b}{n}{
  <->\string\Jtms@@scale}
\installfontas{ptmbi8t}{T1}{jtm}{b}{it}{
  <->\string\Jtms@@scale}
\installfontas{ptmbo8t}{T1}{jtm}{b}{sl}{
  <->\string\Jtms@@scale}
\installfontas{ptmbc8t}{T1}{jtm}{b}{sc}{
  <->\string\Jtms@@scale}
\installfont{jtmr8tw}{jtmr8rw,jtmri7ze,newlatin}{t1}{T1}{jtm}{x}{n}{
  <->\string\Jtms@@scale}
\installfont{jtmri8tw}{jtmri8rw,jtmri7ze,newlatin}{t1}{T1}{jtm}{x}{it}{
  <->\string\Jtms@@scale}
\installfont{jtmro8tw}{jtmro8rw,jtmri7ze,newlatin}{t1}{T1}{jtm}{x}{sl}{
  <->\string\Jtms@@scale}
\installfont{jtmrc8tw}{jtmr8rw,jtmri7ze,newlatin}{t1c}{T1}{jtm}{x}{sc}{
  <->\string\Jtms@@scale}
\installfont{jtmb8tv}{jtmb8rv,jtmri7ze,newlatin}{t1}{T1}{jtm}{bx}{n}{
  <->\string\Jtms@@scale}
\installfont{jtmbi8tv}{jtmbi8rv,jtmri7ze,newlatin}{t1}{T1}{jtm}{bx}{it}{
  <->\string\Jtms@@scale}
\installfont{jtmbo8tv}{jtmbo8rv,jtmri7ze,newlatin}{t1}{T1}{jtm}{bx}{sl}{
  <->\string\Jtms@@scale}
\installfont{jtmbc8tv}{jtmb8rv,jtmri7ze,newlatin}{t1c}{T1}{jtm}{bx}{sc}{
  <->\string\Jtms@@scale}
%    \end{macrocode}
%
% Then |TS1|.  We do not fake small caps here, so |textcomp| can take
% (faked) |\texteuro| from normal fonts.
%    \begin{macrocode}
\installfamily{TS1}{jtm}{}
\installfont{jtmr8cc}{jtmr8rc,textcomp}{ts1}{TS1}{jtm}{c}{n}{
  <->\string\Jtms@@scale}
\installfont{jtmr8ce}{jtmr8re,textcomp,jtmri7ze}{ts1}{TS1}{jtm}{m}{n}{
  <->\string\Jtms@@scale}
\installfont{jtmri8ce}{jtmri8re,textcomp,jtmri7ze}{ts1}{TS1}{jtm}{m}{it}{
  <->\string\Jtms@@scale}
\installfont{jtmro8ce}{jtmro8re,textcomp}{ts1}{TS1}{jtm}{m}{sl}{
  <->\string\Jtms@@scale}
%\installfont{jtmrc8te}{TS1}{jtm}{m}{sc}{
%  <->\string\Jtms@@scale}
\installfontas{ptmb8c}{TS1}{jtm}{b}{n}{
  <->\string\Jtms@@scale}
\installfontas{ptmbi8c}{TS1}{jtm}{b}{it}{
  <->\string\Jtms@@scale}
\installfontas{ptmbo8c}{TS1}{jtm}{b}{sl}{
  <->\string\Jtms@@scale}
%\installfontas{ptmbc8t}{TS1}{jtm}{b}{sc}{
%  <->\string\Jtms@@scale}
\installfont{jtmr8cw}{jtmr8rw,textcomp}{ts1}{TS1}{jtm}{x}{n}{
  <->\string\Jtms@@scale}
\installfont{jtmri8cw}{jtmri8rw,textcomp}{ts1}{TS1}{jtm}{x}{it}{
  <->\string\Jtms@@scale}
\installfont{jtmro8cw}{jtmro8rw,textcomp}{ts1}{TS1}{jtm}{x}{sl}{
  <->\string\Jtms@@scale}
%\installfontas{jtmrc8tw}{TS1}{jtm}{x}{sc}{
%  <->\string\Jtms@@scale}
\installfont{jtmb8cv}{jtmb8rv,textcomp}{ts1}{TS1}{jtm}{bx}{n}{
  <->\string\Jtms@@scale}
\installfont{jtmbi8cv}{jtmbi8rv,textcomp}{ts1}{TS1}{jtm}{bx}{it}{
  <->\string\Jtms@@scale}
\installfont{jtmbo8cv}{jtmbo8rv,textcomp}{ts1}{TS1}{jtm}{bx}{sl}{
  <->\string\Jtms@@scale}
%\installfontas{jtmbc8tv}{TS1}{jtm}{bx}{sc}{
%  <->\string\Jtms@@scale}
%    \end{macrocode}
%
%
% Now math fonts.  We add italics to the |OML| fonts.  Since there are
% some fonts missing in the Beleek smybols fonts, we reset them and
% take fake fonts from Computer Modern
% \changes{v1.1}{2009/10/14}{Added skewchar parameters} 
%    \begin{macrocode}
\installfamily{OML}{jtm}{\skewchar\font=127}
\installfont{jtmri7me}{jtmri7ze,jtmri7te,cmmi10,jamomlhax}{oml}{OML}{jtm}{m}{it}{
  <->\string\Jtms@@scale}
\installfont{jtmbi7me}{jtmbi7tv,jtmri7ze,cmmib10,jamomlhax}{oml}{OML}{jtm}{bx}{it}{
  <->\string\Jtms@@scale}
\installfamily{OMS}{jtm}{\skewchar\font=48}
\installfont{jtmr7ye}{jtmr7yoe,cmsy10}{oms}{OMS}{jtm}{m}{n}{
  <->\string\Jtms@@scale}
%    \end{macrocode}
% 
%
% And the end:
%    \begin{macrocode}
\endinstallfonts
\endrecordtransforms
\bye
%</drv>
%    \end{macrocode}
% 
%\subsection{Fontmap Generation}
%\label{sec:fontmap}
%
% This is a standard procedure~\cite{fontinstallationguide}.  We
% use URW Times files, because |pdftex| cannot extend fonts unless
% they are embedded.  
%    \begin{macrocode}
%<*map>
\input finstmsc.sty
\resetstr{PSfontsuffix}{.pfb}
\specifypsfont{Times-Roman}{\download{utmr8a.pfb}}
\specifypsfont{Times-Italic}{\download{utmri8a.pfb}}
\specifypsfont{Times-Bold}{\download{utmb8a.pfb}}
\specifypsfont{Times-BoldItalic}{\download{utmbi8a.pfb}}
%\etxtoenc{omx}{texmext}
%\enctoetx{texmext}{omx}
\adddriver{dvips}{jtm.map}
\input rec.tex
\donedrivers
\bye
%</map>
%    \end{macrocode}
%
%\subsection{Style File}
%\label{sec:style}
%
% First, define all options:
%    \begin{macrocode}
%<*style>
\RequirePackage{xkeyval}
\DeclareOptionX{scaled}{\gdef\Jtms@scale{#1}}
\DeclareOptionX{sfscaled}{\gdef\Hv@scale{#1}}
\DeclareOptionX{amsfontsscaled}{\gdef\AmsFonts@scale{#1}}
\DeclareOptionX{sffamily}{\gdef\sfdefault{#1}}
\DeclareOptionX{ttfamily}{\gdef\ttdefault{#1}}
\ExecuteOptionsX{scaled=1.05,sfscaled=0.94,amsfontsscaled=1.05,sffamily=phv,%
  ttfamily=pcr}
\ProcessOptionsX
\edef\AmsFonts@@scale{*[\csname AmsFonts@scale\endcsname]}
%    \end{macrocode}
%
%   Now we make |jtm| the text default.
%    \begin{macrocode}
\def\rmdefault{jtm}
%    \end{macrocode}
%
%
% \changes{v1.1}{2009/10/14}{Used math design for large symbols} 
% Math is more complex.  We follow mostly~\cite{Hoenig98:TeXUnbound}.
% Note that |blex| font is broken, so we use math design font
% |cmex| for large symbols.
%    \begin{macrocode}
\DeclareSymbolFont{operators}       {OT1}{jtm}{m}{n}
\DeclareSymbolFont{letters}         {OML}{jtm}{m}{it}
\DeclareSymbolFont{symbols}         {OMS}{jtm}{m}{n}
\DeclareSymbolFont{largesymbols}    {OMX}{cmex}{m}{n}
\SetSymbolFont{operators}{bold}     {OT1}{jtm}{bx}{n}
\SetSymbolFont{letters}{bold}       {OML}{jtm}{bx}{it}
\SetMathAlphabet{\mathrm}{normal}{OT1}{\rmdefault}{m}{n}
\SetMathAlphabet{\mathbf}{normal}{OT1}{\rmdefault}{b}{n}
\SetMathAlphabet{\mathit}{normal}{OT1}{\rmdefault}{m}{it}
\SetMathAlphabet{\mathsf}{normal}{OT1}{\sfdefault}{m}{n}
\SetMathAlphabet{\mathtt}{normal}{OT1}{\ttdefault}{m}{n}
\DeclareMathAlphabet{\mathbold}   {OT1}{jtm}{bx}{it}
\DeclareMathSymbol{\nabla}{\mathord}{symbols}{114}
\DeclareMathSymbol{\Gamma}{\mathalpha}{operators}{0}
\DeclareMathSymbol{\Delta}{\mathalpha}{operators}{1}
\DeclareMathSymbol{\Theta}{\mathalpha}{operators}{2}
\DeclareMathSymbol{\Lambda}{\mathalpha}{operators}{3}
\DeclareMathSymbol{\Xi}{\mathalpha}{operators}{4}
\DeclareMathSymbol{\Pi}{\mathalpha}{operators}{5}
\DeclareMathSymbol{\Sigma}{\mathalpha}{operators}{6}
\DeclareMathSymbol{\Upsilon}{\mathalpha}{operators}{7}
\DeclareMathSymbol{\Phi}{\mathalpha}{operators}{8}
\DeclareMathSymbol{\Psi}{\mathalpha}{operators}{9}
\DeclareMathSymbol{\Omega}{\mathalpha}{operators}{10}
%    \end{macrocode}
% 
%
% We change the scale of amsfonts:
%    \begin{macrocode}
\RequirePackage{eucal,amsfonts}
\DeclareFontFamily{U}{msa}{}
\DeclareFontShape{U}{msa}{m}{n}{%
  <5><6><7><8><9>  gen\AmsFonts@@scale msam%
  <10><10.95><12><14.4><17.28><20.74><24.88> s\AmsFonts@@scale msam10%
  }{}
\DeclareFontFamily{U}{msb}{}
\DeclareFontShape{U}{msb}{m}{n}{%
  <5><6><7><8><9>gen\AmsFonts@@scale msbm%
  <10><10.95><12><14.4><17.28><20.74><24.88>s\AmsFonts@@scale msbm10%
  }{}
\DeclareFontFamily{U}{euf}{}
\DeclareFontShape{U}{euf}{m}{n}{%
  <5><6><7><8><9>gen\AmsFonts@@scale eufm%
  <10><10.95><12><14.4><17.28><20.74><24.88>s\AmsFonts@@scale eufm10%
  }{}
\DeclareFontShape{U}{euf}{b}{n}{%
  <5><6><7><8><9>gen\AmsFonts@@scale eufb%
  <10><10.95><12><14.4><17.28><20.74><24.88>s\AmsFonts@@scale eufb10%
  }{}
\DeclareFontFamily{U}{euex}{}
\DeclareFontShape{U}{euex}{m}{n}{%
  <5-8>sfixed\AmsFonts@@scale euex7<8><9>gen\AmsFonts@@scale euex%
  <10><10.95><12><14.4><17.28><20.74><24.88>s\AmsFonts@@scale euex10%
  }{}
\DeclareFontFamily{U}{eus}{\skewchar\font'60}
\DeclareFontShape{U}{eus}{m}{n}{%
  <5><6><7><8><9>gen\AmsFonts@@scale eusm%
  <10><10.95><12><14.4><17.28><20.74><24.88>s\AmsFonts@@scale eusm10%
  }{}
\DeclareFontShape{U}{eus}{b}{n}{%
  <5><6><7><8><9>gen\AmsFonts@@scale eusb%
  <10><10.95><12><14.4><17.28><20.74><24.88>s\AmsFonts@@scale eusb10%
  }{}
%    \end{macrocode}
% 
% \begin{macro}{\hbar}
% \changes{v1.1}{2009/10/14}{Added macro} 
% Redefine \verb|\hbar|, so it is like $h$ (\verb|amsmath| defines a
% different shape).  The trick is
% from~\cite{Schmidt04:PSNFSS9.2}
%    \begin{macrocode}
\DeclareRobustCommand\hbar{{%
 \dimen@.04em%
 \dimen@ii.06em%
 \def\@tempa##1##2{{%
   \lower##1\dimen@\rlap{\kern##1\dimen@ii\the##2 0\char22}}}%
 \mathchoice\@tempa\@ne\textfont
            \@tempa\@ne\textfont
            \@tempa\defaultscriptratio\scriptfont
            \@tempa\defaultscriptscriptratio\scriptscriptfont
  h}}
%    \end{macrocode}
% \end{macro}
% 
%    \begin{macrocode}
%</style>
%    \end{macrocode}
%
%
%\subsection{Some Auxiliary Files}
%\label{sec:aux}
%
% \changes{v1.2}{2010/04/10}{Added jamot1hax.mtx}
% 
% In the OT1 encoding we want upcase Greek
%    \begin{macrocode}
%<*jamot1hax>
\relax

Upcase Greek for OT1

\metrics

\unsetglyph{Gamma}
\setglyph{Gamma}
\glyph{Gamma1}{1000}
\endsetglyph
\unsetglyph{Delta}
\setglyph{Delta}
\glyph{Delta1}{1000}
\endsetglyph
\unsetglyph{Theta}
\setglyph{Theta}
\glyph{Theta1}{1000}
\endsetglyph
\unsetglyph{Theta}
\setglyph{Theta}
\glyph{Theta1}{1000}
\endsetglyph
\unsetglyph{Lambda}
\setglyph{Lambda}
\glyph{Lambda1}{1000}
\endsetglyph
\unsetglyph{Xi}
\setglyph{Xi}
\glyph{Xi1}{1000}
\endsetglyph
\unsetglyph{Pi}
\setglyph{Pi}
\glyph{Pi1}{1000}
\endsetglyph
\unsetglyph{Sigma}
\setglyph{Sigma}
\glyph{Sigma1}{1000}
\endsetglyph
\unsetglyph{Upsilon}
\setglyph{Upsilon}
\glyph{Upsilon1}{1000}
\endsetglyph
\unsetglyph{Phi}
\setglyph{Phi}
\glyph{Phi1}{1000}
\endsetglyph
\unsetglyph{Psi}
\setglyph{Psi}
\glyph{Psi1}{1000}
\endsetglyph
\unsetglyph{Omega}
\setglyph{Omega}
\glyph{Omega1}{1000}
\endsetglyph


\endmetrics
%</jamot1hax>
%    \end{macrocode}
%
%
% \changes{v1.2}{2010/04/10}{Added jamomlhax.mtx}
% This main idea is  taken from~\cite{Hoenig98:MathInst}.  We changed
% the parameters, of course.  
%    \begin{macrocode}
%<*jamomlhax>
\relax

These hacks help adjust the positioning of accents on italic characters.

\metrics

% \skewkern sets a skewchar kern, assuming that tie is the skewchar. 
\setcommand\skewkern#1#2{\setkern{#1}{tie}{#2}} 

% We need to check that tie is defined
\ifisglyph{tie}\then\else\setglyph{tie}\endsetglyph\fi


\skewkern{A}{75} 
\skewkern{B}{100} 
\skewkern{C}{100} 
\skewkern{D}{50} 
\skewkern{E}{75} 
\skewkern{F}{75} 
\skewkern{G}{100} 
\skewkern{H}{50} 
\skewkern{I}{100} 
\skewkern{J}{100} 
\skewkern{K}{75} 
\skewkern{M}{100} 
\skewkern{N}{50} 
\skewkern{O}{100} 
\skewkern{P}{100} 
\skewkern{Q}{100} 
\skewkern{R}{100} 
\skewkern{S}{100} 
\skewkern{T}{50} 
\skewkern{U}{50} 
\skewkern{V}{50} 
\skewkern{W}{50} 
\skewkern{X}{50} 
\skewkern{Y}{50} 
\skewkern{Z}{50} 
\skewkern{a}{75} 
\skewkern{c}{75} 
\skewkern{d}{100} 
\skewkern{e}{75} 
\skewkern{f}{140} 
\skewkern{g}{75} 
\skewkern{i}{75} 
\skewkern{j}{75} 
\skewkern{l}{100} 
\skewkern{m}{50} 
\skewkern{n}{50} 
\skewkern{o}{75} 
\skewkern{p}{75} 
\skewkern{q}{75} 
\skewkern{r}{50} 
\skewkern{s}{100} 
\skewkern{t}{50} 
\skewkern{u}{75} 
\skewkern{v}{-150} 
\skewkern{w}{75} 
\skewkern{x}{50} 
\skewkern{y}{50} 
\skewkern{z}{50} 
\skewkern{dotlessi}{50} 
\skewkern{dotlessj}{120}
\skewkern{Gamma}{100}
\skewkern{Delta}{200}
\skewkern{Theta}{100}
\skewkern{Lambda}{200}
\skewkern{Xi}{125}
\skewkern{Pi}{100}
\skewkern{Sigma}{100}
\skewkern{Upsilon}{100}
\skewkern{Phi}{100}
\skewkern{Psi}{50}
\skewkern{Omega}{100}
%\skewkern{alpha}{50}
\skewkern{beta}{75}
\skewkern{gamma}{25}
\skewkern{delta}{100}
\skewkern{epsilon1}{75}
\skewkern{zeta}{50}
\skewkern{eta}{25}
\skewkern{theta}{50}
%\skewkern{iota}{50}
%\skewkern{kappa}{50}
%\skewkern{lambda}{50}
\skewkern{mu}{35}
%\skewkern{nu}{50}
\skewkern{xi}{75}
%\skewkern{pi}{50}
\skewkern{rho}{75}
\skewkern{sigma}{25}
\skewkern{tau}{25}
% \skewkern{upsilon}{-25} 
\skewkern{phi}{125}
\skewkern{chi}{50}
\skewkern{psi}{50}
\skewkern{omega}{25}
\skewkern{epsilon}{50}
%\skewkern{theta1}{50}
%\skewkern{omega1}{50}
\skewkern{rho1}{50}
%\skewkern{sigma1}{75}
\skewkern{lscript}{75} 
\skewkern{weierstrass}{60} 

\endmetrics
%</jamomlhax>
%    \end{macrocode}
%
%
% 
%\Finale
%\clearpage
%
%\PrintChanges
%\clearpage
%\PrintIndex
%
\endinput