path: root/Build/source/texk/web2c/tex.web

% This program is copyright (C) 1982 by D. E. Knuth; all rights are reserved.
% Copying of this file is authorized only if (1) you are D. E. Knuth, or if
% (2) you make absolutely no changes to your copy. (The WEB system provides
% for alterations via an auxiliary file; the master file should stay intact.)
% See Appendix H of the WEB manual for hints on how to install this program.
% And see Appendix A of the TRIP manual for details about how to validate it.

% TeX is a trademark of the American Mathematical Society.
% METAFONT is a trademark of Addison-Wesley Publishing Company.

% Version 0 was released in September 1982 after it passed a variety of tests.
% Version 1 was released in November 1983 after thorough testing.
% Version 1.1 fixed ``disappearing font identifiers'' et alia (July 1984).
% Version 1.2 allowed `0' in response to an error, et alia (October 1984).
% Version 1.3 made memory allocation more flexible and local (November 1984).
% Version 1.4 fixed accents right after line breaks, et alia (April 1985).
% Version 1.5 fixed \the\toks after other expansion in \edefs (August 1985).
% Version 2.0 (almost identical to 1.5) corresponds to "Volume B" (April 1986).
% Version 2.1 corrected anomalies in discretionary breaks (January 1987).
% Version 2.2 corrected "(Please type...)" with null \endlinechar (April 1987).
% Version 2.3 avoided incomplete page in premature termination (August 1987).
% Version 2.4 fixed \noaligned rules in indented displays (August 1987).
% Version 2.5 saved cur_order when expanding tokens (September 1987).
% Version 2.6 added 10sp slop when shipping leaders (November 1987).
% Version 2.7 improved rounding of negative-width characters (November 1987).
% Version 2.8 fixed weird bug if no \patterns are used (December 1987).
% Version 2.9 made \csname\endcsname's "relax" local (December 1987).
% Version 2.91 fixed \outer\def\a0{}\a\a bug (April 1988).
% Version 2.92 fixed \patterns, also file names with complex macros (May 1988).
% Version 2.93 fixed negative halving in allocator when mem_min<0 (June 1988).
% Version 2.94 kept open_log_file from calling fatal_error (November 1988).
% Version 2.95 solved that problem a better way (December 1988).
% Version 2.96 corrected bug in "Infinite shrinkage" recovery (January 1989).
% Version 2.97 corrected blunder in creating 2.95 (February 1989).
% Version 2.98 omitted save_for_after at outer level (March 1989).
% Version 2.99 caught $$\begingroup\halign..$$ (June 1989).
% Version 2.991 caught .5\ifdim.6... (June 1989).
% Version 2.992 introduced major changes for 8-bit extensions (September 1989).
% Version 2.993 fixed a save_stack synchronization bug et alia (December 1989).
% Version 3.0 fixed unusual displays; was more \output robust (March 1990).
% Version 3.1 fixed nullfont, disabled \write{\the\prevgraf} (September 1990).
% Version 3.14 fixed unprintable font names and corrected typos (March 1991).
% Version 3.141 more of same; reconstituted ligatures better (March 1992).
% Version 3.1415 preserved nonexplicit kerns, tidied up (February 1993).
% Version 3.14159 allowed fontmemsize to change; bulletproofing (March 1995).
% Version 3.141592 fixed \xleaders, glueset, weird alignments (December 2002).

% A reward of $327.68 will be paid to the first finder of any remaining bug.

% Although considerable effort has been expended to make the TeX program
% correct and reliable, no warranty is implied; the author disclaims any
% obligation or liability for damages, including but not limited to
% special, indirect, or consequential damages arising out of or in
% connection with the use or performance of this software. This work has
% been a ``labor of love'' and the author hopes that users enjoy it.

% Here is TeX material that gets inserted after \input webmac
\def\hang{\hangindent 3em\noindent\ignorespaces}
\def\hangg#1 {\hang\hbox{#1 }}
\def\textindent#1{\hangindent2.5em\noindent\hbox to2.5em{\hss#1 }\ignorespaces}
\font\ninerm=cmr9
\let\mc=\ninerm % medium caps for names like SAIL
\def\PASCAL{Pascal}
\def\ph{\hbox{Pascal-H}}
\def\pct!{{\char`\%}} % percent sign in ordinary text
\font\logo=logo10 % font used for the METAFONT logo
\def\MF{{\logo META}\-{\logo FONT}}
\def\<#1>{$\langle#1\rangle$}
\def\section{\mathhexbox278}

\def\(#1){} % this is used to make section names sort themselves better
\def\9#1{} % this is used for sort keys in the index via @@:sort key}{entry@@>

\outer\def\N#1. \[#2]#3.{\MN#1.\vfil\eject % begin starred section
  \def\rhead{PART #2:\uppercase{#3}} % define running headline
  \message{*\modno} % progress report
  \edef\next{\write\cont{\Z{\?#2]#3}{\modno}{\the\pageno}}}\next
  \ifon\startsection{\bf\ignorespaces#3.\quad}\ignorespaces}
\let\?=\relax % we want to be able to \write a \?

\def\title{\TeX82}
\def\topofcontents{\hsize 5.5in
  \vglue 0pt plus 1fil minus 1.5in
  \def\?##1]{\hbox to 1in{\hfil##1.\ }}
  }
\def\botofcontents{\vskip 0pt plus 1fil minus 1.5in}
\pageno=3
\def\glob{13} % this should be the section number of "<Global...>"
\def\gglob{20, 26} % this should be the next two sections of "<Global...>"

@* \[1] Introduction.
This is \TeX, a document compiler intended to produce typesetting of high
quality.
The \PASCAL\ program that follows is the definition of \TeX82, a standard
@:PASCAL}{\PASCAL@>
@!@:TeX82}{\TeX82@>
version of \TeX\ that is designed to be highly portable so that identical output
will be obtainable on a great variety of computers.

The main purpose of the following program is to explain the algorithms of \TeX\
as clearly as possible. As a result, the program will not necessarily be very
efficient when a particular \PASCAL\ compiler has translated it into a
particular machine language. However, the program has been written so that it
can be tuned to run efficiently in a wide variety of operating environments
by making comparatively few changes. Such flexibility is possible because
the documentation that follows is written in the \.{WEB} language, which is
at a higher level than \PASCAL; the preprocessing step that converts \.{WEB}
to \PASCAL\ is able to introduce most of the necessary refinements.
Semi-automatic translation to other languages is also feasible, because the
program below does not make extensive use of features that are peculiar to
\PASCAL.

A large piece of software like \TeX\ has inherent complexity that cannot
be reduced below a certain level of difficulty, although each individual
part is fairly simple by itself. The \.{WEB} language is intended to make
the algorithms as readable as possible, by reflecting the way the
individual program pieces fit together and by providing the
cross-references that connect different parts. Detailed comments about
what is going on, and about why things were done in certain ways, have
been liberally sprinkled throughout the program.  These comments explain
features of the implementation, but they rarely attempt to explain the
\TeX\ language itself, since the reader is supposed to be familiar with
{\sl The \TeX book}.
@.WEB@>
@:TeXbook}{\sl The \TeX book@>

@ The present implementation has a long ancestry, beginning in the summer
of~1977, when Michael~F. Plass and Frank~M. Liang designed and coded
a prototype
@^Plass, Michael Frederick@>
@^Liang, Franklin Mark@>
@^Knuth, Donald Ervin@>
based on some specifications that the author had made in May of that year.
This original proto\TeX\ included macro definitions and elementary
manipulations on boxes and glue, but it did not have line-breaking,
page-breaking, mathematical formulas, alignment routines, error recovery,
or the present semantic nest; furthermore,
it used character lists instead of token lists, so that a control sequence
like \.{\\halign} was represented by a list of seven characters. A
complete version of \TeX\ was designed and coded by the author in late
1977 and early 1978; that program, like its prototype, was written in the
{\mc SAIL} language, for which an excellent debugging system was
available. Preliminary plans to convert the {\mc SAIL} code into a form
somewhat like the present ``web'' were developed by Luis Trabb~Pardo and
the author at the beginning of 1979, and a complete implementation was
created by Ignacio~A. Zabala in 1979 and 1980. The \TeX82 program, which
@^Zabala Salelles, Ignacio Andr\'es@>
was written by the author during the latter part of 1981 and the early
part of 1982, also incorporates ideas from the 1979 implementation of
@^Guibas, Leonidas Ioannis@>
@^Sedgewick, Robert@>
@^Wyatt, Douglas Kirk@>
\TeX\ in {\mc MESA} that was written by Leonidas Guibas, Robert Sedgewick,
and Douglas Wyatt at the Xerox Palo Alto Research Center.  Several hundred
refinements were introduced into \TeX82 based on the experiences gained with
the original implementations, so that essentially every part of the system
has been substantially improved. After the appearance of ``Version 0'' in
September 1982, this program benefited greatly from the comments of
many other people, notably David~R. Fuchs and Howard~W. Trickey.
A final revision in September 1989 extended the input character set to
eight-bit codes and introduced the ability to hyphenate words from
different languages, based on some ideas of Michael~J. Ferguson.
@^Fuchs, David Raymond@>
@^Trickey, Howard Wellington@>
@^Ferguson, Michael John@>

No doubt there still is plenty of room for improvement, but the author
is firmly committed to keeping \TeX82 ``frozen'' from now on; stability
and reliability are to be its main virtues.

On the other hand, the \.{WEB} description can be extended without changing
the core of \TeX82 itself, and the program has been designed so that such
extensions are not extremely difficult to make.
The |banner| string defined here should be changed whenever \TeX\
undergoes any modifications, so that it will be clear which version of
\TeX\ might be the guilty party when a problem arises.
@^extensions to \TeX@>
@^system dependencies@>

If this program is changed, the resulting system should not be called
`\TeX'; the official name `\TeX' by itself is reserved
for software systems that are fully compatible with each other.
A special test suite called the ``\.{TRIP} test'' is available for
helping to determine whether a particular implementation deserves to be
known as `\TeX' [cf.~Stanford Computer Science report CS1027,
November 1984].

@d banner=='This is TeX, Version 3.141592' {printed when \TeX\ starts}

@ Different \PASCAL s have slightly different conventions, and the present
@!@:PASCAL H}{\ph@>
program expresses \TeX\ in terms of the \PASCAL\ that was
available to the author in 1982. Constructions that apply to
this particular compiler, which we shall call \ph, should help the
reader see how to make an appropriate interface for other systems
if necessary. (\ph\ is Charles Hedrick's modification of a compiler
@^Hedrick, Charles Locke@>
for the DECsystem-10 that was originally developed at the University of
Hamburg; cf.\ {\sl SOFTWARE---Practice \AM\ Experience \bf6} (1976),
29--42. The \TeX\ program below is intended to be adaptable, without
extensive changes, to most other versions of \PASCAL, so it does not fully
use the admirable features of \ph. Indeed, a conscious effort has been
made here to avoid using several idiosyncratic features of standard
\PASCAL\ itself, so that most of the code can be translated mechanically
into other high-level languages. For example, the `\&{with}' and `\\{new}'
features are not used, nor are pointer types, set types, or enumerated
scalar types; there are no `\&{var}' parameters, except in the case of files;
there are no tag fields on variant records; there are no assignments
|real:=integer|; no procedures are declared local to other procedures.)

The portions of this program that involve system-dependent code, where
changes might be necessary because of differences between \PASCAL\ compilers
and/or differences between
operating systems, can be identified by looking at the sections whose
numbers are listed under `system dependencies' in the index. Furthermore,
the index entries for `dirty \PASCAL' list all places where the restrictions
of \PASCAL\ have not been followed perfectly, for one reason or another.
@!@^system dependencies@>
@!@^dirty \PASCAL@>

Incidentally, \PASCAL's standard |round| function can be problematical,
because it disagrees with the IEEE floating-point standard.
Many implementors have
therefore chosen to substitute their own home-grown rounding procedure.

@ The program begins with a normal \PASCAL\ program heading, whose
components will be filled in later, using the conventions of \.{WEB}.
@.WEB@>
For example, the portion of the program called `\X\glob:Global
variables\X' below will be replaced by a sequence of variable declarations
that starts in $\section\glob$ of this documentation. In this way, we are able
to define each individual global variable when we are prepared to
understand what it means; we do not have to define all of the globals at
once.  Cross references in $\section\glob$, where it says ``See also
sections \gglob, \dots,'' also make it possible to look at the set of
all global variables, if desired.  Similar remarks apply to the other
portions of the program heading.

Actually the heading shown here is not quite normal: The |program| line
does not mention any |output| file, because \ph\ would ask the \TeX\ user
to specify a file name if |output| were specified here.
@^system dependencies@>

@d mtype==t@&y@&p@&e {this is a \.{WEB} coding trick:}
@f mtype==type {`\&{mtype}' will be equivalent to `\&{type}'}
@f type==true {but `|type|' will not be treated as a reserved word}

@p @t\4@>@<Compiler directives@>@/
program TEX; {all file names are defined dynamically}
label @<Labels in the outer block@>@/
const @<Constants in the outer block@>@/
mtype @<Types in the outer block@>@/
var @<Global variables@>@/
@#
procedure initialize; {this procedure gets things started properly}
  var @<Local variables for initialization@>@/
  begin @<Initialize whatever \TeX\ might access@>@;
  end;@#
@t\4@>@<Basic printing procedures@>@/
@t\4@>@<Error handling procedures@>@/

@ The overall \TeX\ program begins with the heading just shown, after which
comes a bunch of procedure declarations and function declarations.
Finally we will get to the main program, which begins with the
comment `|start_here|'. If you want to skip down to the
main program now, you can look up `|start_here|' in the index.
But the author suggests that the best way to understand this program
is to follow pretty much the order of \TeX's components as they appear in the
\.{WEB} description you are now reading, since the present ordering is
intended to combine the advantages of the ``bottom up'' and ``top down''
approaches to the problem of understanding a somewhat complicated system.

@ Three labels must be declared in the main program, so we give them
symbolic names.

@d start_of_TEX=1 {go here when \TeX's variables are initialized}
@d end_of_TEX=9998 {go here to close files and terminate gracefully}
@d final_end=9999 {this label marks the ending of the program}

@<Labels in the out...@>=
start_of_TEX@t\hskip-2pt@>, end_of_TEX@t\hskip-2pt@>,@,final_end;
  {key control points}

@ Some of the code below is intended to be used only when diagnosing the
strange behavior that sometimes occurs when \TeX\ is being installed or
when system wizards are fooling around with \TeX\ without quite knowing
what they are doing. Such code will not normally be compiled; it is
delimited by the codewords `$|debug|\ldots|gubed|$', with apologies
to people who wish to preserve the purity of English.

Similarly, there is some conditional code delimited by
`$|stat|\ldots|tats|$' that is intended for use when statistics are to be
kept about \TeX's memory usage.  The |stat| $\ldots$ |tats| code also
implements diagnostic information for \.{\\tracingparagraphs} and
\.{\\tracingpages}.
@^debugging@>

@d debug==@{ {change this to `$\\{debug}\equiv\null$' when debugging}
@d gubed==@t@>@} {change this to `$\\{gubed}\equiv\null$' when debugging}
@f debug==begin
@f gubed==end
@#
@d stat==@{ {change this to `$\\{stat}\equiv\null$' when gathering
  usage statistics}
@d tats==@t@>@} {change this to `$\\{tats}\equiv\null$' when gathering
  usage statistics}
@f stat==begin
@f tats==end

@ This program has two important variations: (1) There is a long and slow
version called \.{INITEX}, which does the extra calculations needed to
@.INITEX@>
initialize \TeX's internal tables; and (2)~there is a shorter and faster
production version, which cuts the initialization to a bare minimum.
Parts of the program that are needed in (1) but not in (2) are delimited by
the codewords `$|init|\ldots|tini|$'.

@d init== {change this to `$\\{init}\equiv\.{@@\{}$' in the production version}
@d tini== {change this to `$\\{tini}\equiv\.{@@\}}$' in the production version}
@f init==begin
@f tini==end

@<Initialize whatever...@>=
@<Set initial values of key variables@>@/
@!init @<Initialize table entries (done by \.{INITEX} only)@>@;@+tini

@ If the first character of a \PASCAL\ comment is a dollar sign,
\ph\ treats the comment as a list of ``compiler directives'' that will
affect the translation of this program into machine language.  The
directives shown below specify full checking and inclusion of the \PASCAL\
debugger when \TeX\ is being debugged, but they cause range checking and other
redundant code to be eliminated when the production system is being generated.
Arithmetic overflow will be detected in all cases.
@^system dependencies@>
@^Overflow in arithmetic@>

@<Compiler directives@>=
@{@&$C-,A+,D-@} {no range check, catch arithmetic overflow, no debug overhead}
@!debug @{@&$C+,D+@}@+ gubed {but turn everything on when debugging}

@ This \TeX\ implementation conforms to the rules of the {\sl Pascal User
@:PASCAL}{\PASCAL@>
@^system dependencies@>
Manual} published by Jensen and Wirth in 1975, except where system-dependent
@^Wirth, Niklaus@>
@^Jensen, Kathleen@>
code is necessary to make a useful system program, and except in another
respect where such conformity would unnecessarily obscure the meaning
and clutter up the code: We assume that |case| statements may include a
default case that applies if no matching label is found. Thus, we shall use
constructions like
$$\vbox{\halign{\ignorespaces#\hfil\cr
|case x of|\cr
1: $\langle\,$code for $x=1\,\rangle$;\cr
3: $\langle\,$code for $x=3\,\rangle$;\cr
|othercases| $\langle\,$code for |x<>1| and |x<>3|$\,\rangle$\cr
|endcases|\cr}}$$
since most \PASCAL\ compilers have plugged this hole in the language by
incorporating some sort of default mechanism. For example, the \ph\
compiler allows `|others|:' as a default label, and other \PASCAL s allow
syntaxes like `\&{else}' or `\&{otherwise}' or `\\{otherwise}:', etc. The
definitions of |othercases| and |endcases| should be changed to agree with
local conventions.  Note that no semicolon appears before |endcases| in
this program, so the definition of |endcases| should include a semicolon
if the compiler wants one. (Of course, if no default mechanism is
available, the |case| statements of \TeX\ will have to be laboriously
extended by listing all remaining cases. People who are stuck with such
\PASCAL s have, in fact, done this, successfully but not happily!)

@d othercases == others: {default for cases not listed explicitly}
@d endcases == @+end {follows the default case in an extended |case| statement}
@f othercases == else
@f endcases == end

@ The following parameters can be changed at compile time to extend or
reduce \TeX's capacity. They may have different values in \.{INITEX} and
in production versions of \TeX.
@.INITEX@>
@^system dependencies@>

@<Constants...@>=
@!mem_max=30000; {greatest index in \TeX's internal |mem| array;
  must be strictly less than |max_halfword|;
  must be equal to |mem_top| in \.{INITEX}, otherwise |>=mem_top|}
@!mem_min=0; {smallest index in \TeX's internal |mem| array;
  must be |min_halfword| or more;
  must be equal to |mem_bot| in \.{INITEX}, otherwise |<=mem_bot|}
@!buf_size=500; {maximum number of characters simultaneously present in
  current lines of open files and in control sequences between
  \.{\\csname} and \.{\\endcsname}; must not exceed |max_halfword|}
@!error_line=72; {width of context lines on terminal error messages}
@!half_error_line=42; {width of first lines of contexts in terminal
  error messages; should be between 30 and |error_line-15|}
@!max_print_line=79; {width of longest text lines output; should be at least 60}
@!stack_size=200; {maximum number of simultaneous input sources}
@!max_in_open=6; {maximum number of input files and error insertions that
  can be going on simultaneously}
@!font_max=75; {maximum internal font number; must not exceed |max_quarterword|
  and must be at most |font_base+256|}
@!font_mem_size=20000; {number of words of |font_info| for all fonts}
@!param_size=60; {maximum number of simultaneous macro parameters}
@!nest_size=40; {maximum number of semantic levels simultaneously active}
@!max_strings=3000; {maximum number of strings; must not exceed |max_halfword|}
@!string_vacancies=8000; {the minimum number of characters that should be
  available for the user's control sequences and font names,
  after \TeX's own error messages are stored}
@!pool_size=32000; {maximum number of characters in strings, including all
  error messages and help texts, and the names of all fonts and
  control sequences; must exceed |string_vacancies| by the total
  length of \TeX's own strings, which is currently about 23000}
@!save_size=600; {space for saving values outside of current group; must be
  at most |max_halfword|}
@!trie_size=8000; {space for hyphenation patterns; should be larger for
  \.{INITEX} than it is in production versions of \TeX}
@!trie_op_size=500; {space for ``opcodes'' in the hyphenation patterns}
@!dvi_buf_size=800; {size of the output buffer; must be a multiple of 8}
@!file_name_size=40; {file names shouldn't be longer than this}
@!pool_name='TeXformats:TEX.POOL                     ';
  {string of length |file_name_size|; tells where the string pool appears}
@.TeXformats@>

@ Like the preceding parameters, the following quantities can be changed
at compile time to extend or reduce \TeX's capacity. But if they are changed,
it is necessary to rerun the initialization program \.{INITEX}
@.INITEX@>
to generate new tables for the production \TeX\ program.
One can't simply make helter-skelter changes to the following constants,
since certain rather complex initialization
numbers are computed from them. They are defined here using
\.{WEB} macros, instead of being put into \PASCAL's |const| list, in order to
emphasize this distinction.

@d mem_bot=0 {smallest index in the |mem| array dumped by \.{INITEX};
  must not be less than |mem_min|}
@d mem_top==30000 {largest index in the |mem| array dumped by \.{INITEX};
  must be substantially larger than |mem_bot|
  and not greater than |mem_max|}
@d font_base=0 {smallest internal font number; must not be less
  than |min_quarterword|}
@d hash_size=2100 {maximum number of control sequences; it should be at most
  about |(mem_max-mem_min)/10|}
@d hash_prime=1777 {a prime number equal to about 85\pct! of |hash_size|}
@d hyph_size=307 {another prime; the number of \.{\\hyphenation} exceptions}
@^system dependencies@>

@ In case somebody has inadvertently made bad settings of the ``constants,''
\TeX\ checks them using a global variable called |bad|.

This is the first of many sections of \TeX\ where global variables are
defined.

@<Glob...@>=
@!bad:integer; {is some ``constant'' wrong?}

@ Later on we will say `\ignorespaces|if mem_max>=max_halfword then bad:=14|',
or something similar. (We can't do that until |max_halfword| has been defined.)

@<Check the ``constant'' values for consistency@>=
bad:=0;
if (half_error_line<30)or(half_error_line>error_line-15) then bad:=1;
if max_print_line<60 then bad:=2;
if dvi_buf_size mod 8<>0 then bad:=3;
if mem_bot+1100>mem_top then bad:=4;
if hash_prime>hash_size then bad:=5;
if max_in_open>=128 then bad:=6;
if mem_top<256+11 then bad:=7; {we will want |null_list>255|}

@ Labels are given symbolic names by the following definitions, so that
occasional |goto| statements will be meaningful. We insert the label
`|exit|' just before the `\ignorespaces|end|\unskip' of a procedure in
which we have used the `|return|' statement defined below; the label
`|restart|' is occasionally used at the very beginning of a procedure; and
the label `|reswitch|' is occasionally used just prior to a |case|
statement in which some cases change the conditions and we wish to branch
to the newly applicable case.  Loops that are set up with the |loop|
construction defined below are commonly exited by going to `|done|' or to
`|found|' or to `|not_found|', and they are sometimes repeated by going to
`|continue|'.  If two or more parts of a subroutine start differently but
end up the same, the shared code may be gathered together at
`|common_ending|'.

Incidentally, this program never declares a label that isn't actually used,
because some fussy \PASCAL\ compilers will complain about redundant labels.

@d exit=10 {go here to leave a procedure}
@d restart=20 {go here to start a procedure again}
@d reswitch=21 {go here to start a case statement again}
@d continue=22 {go here to resume a loop}
@d done=30 {go here to exit a loop}
@d done1=31 {like |done|, when there is more than one loop}
@d done2=32 {for exiting the second loop in a long block}
@d done3=33 {for exiting the third loop in a very long block}
@d done4=34 {for exiting the fourth loop in an extremely long block}
@d done5=35 {for exiting the fifth loop in an immense block}
@d done6=36 {for exiting the sixth loop in a block}
@d found=40 {go here when you've found it}
@d found1=41 {like |found|, when there's more than one per routine}
@d found2=42 {like |found|, when there's more than two per routine}
@d not_found=45 {go here when you've found nothing}
@d common_ending=50 {go here when you want to merge with another branch}

@ Here are some macros for common programming idioms.

@d incr(#) == #:=#+1 {increase a variable by unity}
@d decr(#) == #:=#-1 {decrease a variable by unity}
@d negate(#) == #:=-# {change the sign of a variable}
@d loop == @+ while true do@+ {repeat over and over until a |goto| happens}
@f loop == xclause
  {\.{WEB}'s |xclause| acts like `\ignorespaces|while true do|\unskip'}
@d do_nothing == {empty statement}
@d return == goto exit {terminate a procedure call}
@f return == nil
@d empty=0 {symbolic name for a null constant}

@* \[2] The character set.
In order to make \TeX\ readily portable to a wide variety of
computers, all of its input text is converted to an internal eight-bit
code that includes standard ASCII, the ``American Standard Code for
Information Interchange.''  This conversion is done immediately when each
character is read in. Conversely, characters are converted from ASCII to
the user's external representation just before they are output to a
text file.

Such an internal code is relevant to users of \TeX\ primarily because it
governs the positions of characters in the fonts. For example, the
character `\.A' has ASCII code $65=@'101$, and when \TeX\ typesets
this letter it specifies character number 65 in the current font.
If that font actually has `\.A' in a different position, \TeX\ doesn't
know what the real position is; the program that does the actual printing from
\TeX's device-independent files is responsible for converting from ASCII to
a particular font encoding.
@^ASCII code@>

\TeX's internal code also defines the value of constants
that begin with a reverse apostrophe; and it provides an index to the
\.{\\catcode}, \.{\\mathcode}, \.{\\uccode}, \.{\\lccode}, and \.{\\delcode}
tables.

@ Characters of text that have been converted to \TeX's internal form
are said to be of type |ASCII_code|, which is a subrange of the integers.

@<Types...@>=
@!ASCII_code=0..255; {eight-bit numbers}

@ The original \PASCAL\ compiler was designed in the late 60s, when six-bit
character sets were common, so it did not make provision for lowercase
letters. Nowadays, of course, we need to deal with both capital and small
letters in a convenient way, especially in a program for typesetting;
so the present specification of \TeX\ has been written under the assumption
that the \PASCAL\ compiler and run-time system permit the use of text files
with more than 64 distinguishable characters. More precisely, we assume that
the character set contains at least the letters and symbols associated
with ASCII codes @'40 through @'176; all of these characters are now
available on most computer terminals.

Since we are dealing with more characters than were present in the first
\PASCAL\ compilers, we have to decide what to call the associated data
type. Some \PASCAL s use the original name |char| for the
characters in text files, even though there now are more than 64 such
characters, while other \PASCAL s consider |char| to be a 64-element
subrange of a larger data type that has some other name.

In order to accommodate this difference, we shall use the name |text_char|
to stand for the data type of the characters that are converted to and
from |ASCII_code| when they are input and output. We shall also assume
that |text_char| consists of the elements |chr(first_text_char)| through
|chr(last_text_char)|, inclusive. The following definitions should be
adjusted if necessary.
@^system dependencies@>

@d text_char == char {the data type of characters in text files}
@d first_text_char=0 {ordinal number of the smallest element of |text_char|}
@d last_text_char=255 {ordinal number of the largest element of |text_char|}

@<Local variables for init...@>=
@!i:integer;

@ The \TeX\ processor converts between ASCII code and
the user's external character set by means of arrays |xord| and |xchr|
that are analogous to \PASCAL's |ord| and |chr| functions.

@<Glob...@>=
@!xord: array [text_char] of ASCII_code;
  {specifies conversion of input characters}
@!xchr: array [ASCII_code] of text_char;
  {specifies conversion of output characters}

@ Since we are assuming that our \PASCAL\ system is able to read and
write the visible characters of standard ASCII (although not
necessarily using the ASCII codes to represent them), the following
assignment statements initialize the standard part of the |xchr| array
properly, without needing any system-dependent changes. On the other
hand, it is possible to implement \TeX\ with less complete character
sets, and in such cases it will be necessary to change something here.
@^system dependencies@>

@<Set init...@>=
xchr[@'40]:=' ';
xchr[@'41]:='!';
xchr[@'42]:='"';
xchr[@'43]:='#';
xchr[@'44]:='$';
xchr[@'45]:='%';
xchr[@'46]:='&';
xchr[@'47]:='''';@/
xchr[@'50]:='(';
xchr[@'51]:=')';
xchr[@'52]:='*';
xchr[@'53]:='+';
xchr[@'54]:=',';
xchr[@'55]:='-';
xchr[@'56]:='.';
xchr[@'57]:='/';@/
xchr[@'60]:='0';
xchr[@'61]:='1';
xchr[@'62]:='2';
xchr[@'63]:='3';
xchr[@'64]:='4';
xchr[@'65]:='5';
xchr[@'66]:='6';
xchr[@'67]:='7';@/
xchr[@'70]:='8';
xchr[@'71]:='9';
xchr[@'72]:=':';
xchr[@'73]:=';';
xchr[@'74]:='<';
xchr[@'75]:='=';
xchr[@'76]:='>';
xchr[@'77]:='?';@/
xchr[@'100]:='@@';
xchr[@'101]:='A';
xchr[@'102]:='B';
xchr[@'103]:='C';
xchr[@'104]:='D';
xchr[@'105]:='E';
xchr[@'106]:='F';
xchr[@'107]:='G';@/
xchr[@'110]:='H';
xchr[@'111]:='I';
xchr[@'112]:='J';
xchr[@'113]:='K';
xchr[@'114]:='L';
xchr[@'115]:='M';
xchr[@'116]:='N';
xchr[@'117]:='O';@/
xchr[@'120]:='P';
xchr[@'121]:='Q';
xchr[@'122]:='R';
xchr[@'123]:='S';
xchr[@'124]:='T';
xchr[@'125]:='U';
xchr[@'126]:='V';
xchr[@'127]:='W';@/
xchr[@'130]:='X';
xchr[@'131]:='Y';
xchr[@'132]:='Z';
xchr[@'133]:='[';
xchr[@'134]:='\';
xchr[@'135]:=']';
xchr[@'136]:='^';
xchr[@'137]:='_';@/
xchr[@'140]:='`';
xchr[@'141]:='a';
xchr[@'142]:='b';
xchr[@'143]:='c';
xchr[@'144]:='d';
xchr[@'145]:='e';
xchr[@'146]:='f';
xchr[@'147]:='g';@/
xchr[@'150]:='h';
xchr[@'151]:='i';
xchr[@'152]:='j';
xchr[@'153]:='k';
xchr[@'154]:='l';
xchr[@'155]:='m';
xchr[@'156]:='n';
xchr[@'157]:='o';@/
xchr[@'160]:='p';
xchr[@'161]:='q';
xchr[@'162]:='r';
xchr[@'163]:='s';
xchr[@'164]:='t';
xchr[@'165]:='u';
xchr[@'166]:='v';
xchr[@'167]:='w';@/
xchr[@'170]:='x';
xchr[@'171]:='y';
xchr[@'172]:='z';
xchr[@'173]:='{';
xchr[@'174]:='|';
xchr[@'175]:='}';
xchr[@'176]:='~';@/

@ Some of the ASCII codes without visible characters have been given symbolic
names in this program because they are used with a special meaning.

@d null_code=@'0 {ASCII code that might disappear}
@d carriage_return=@'15 {ASCII code used at end of line}
@d invalid_code=@'177 {ASCII code that many systems prohibit in text files}

@ The ASCII code is ``standard'' only to a certain extent, since many
computer installations have found it advantageous to have ready access
to more than 94 printing characters. Appendix~C of {\sl The \TeX book\/}
gives a complete specification of the intended correspondence between
characters and \TeX's internal representation.
@:TeXbook}{\sl The \TeX book@>

If \TeX\ is being used
on a garden-variety \PASCAL\ for which only standard ASCII
codes will appear in the input and output files, it doesn't really matter
what codes are specified in |xchr[0..@'37]|, but the safest policy is to
blank everything out by using the code shown below.

However, other settings of |xchr| will make \TeX\ more friendly on
computers that have an extended character set, so that users can type things
like `\.^^Z' instead of `\.{\\ne}'. People with extended character sets can
assign codes arbitrarily, giving an |xchr| equivalent to whatever
characters the users of \TeX\ are allowed to have in their input files.
It is best to make the codes correspond to the intended interpretations as
shown in Appendix~C whenever possible; but this is not necessary. For
example, in countries with an alphabet of more than 26 letters, it is
usually best to map the additional letters into codes less than~@'40.
To get the most ``permissive'' character set, change |' '| on the
right of these assignment statements to |chr(i)|.
@^character set dependencies@>
@^system dependencies@>

@<Set init...@>=
for i:=0 to @'37 do xchr[i]:=' ';
for i:=@'177 to @'377 do xchr[i]:=' ';

@ The following system-independent code makes the |xord| array contain a
suitable inverse to the information in |xchr|. Note that if |xchr[i]=xchr[j]|
where |i<j<@'177|, the value of |xord[xchr[i]]| will turn out to be
|j| or more; hence, standard ASCII code numbers will be used instead of
codes below @'40 in case there is a coincidence.

@<Set init...@>=
for i:=first_text_char to last_text_char do xord[chr(i)]:=invalid_code;
for i:=@'200 to @'377 do xord[xchr[i]]:=i;
for i:=0 to @'176 do xord[xchr[i]]:=i;

@* \[3] Input and output.
The bane of portability is the fact that different operating systems treat
input and output quite differently, perhaps because computer scientists
have not given sufficient attention to this problem. People have felt somehow
that input and output are not part of ``real'' programming. Well, it is true
that some kinds of programming are more fun than others. With existing
input/output conventions being so diverse and so messy, the only sources of
joy in such parts of the code are the rare occasions when one can find a
way to make the program a little less bad than it might have been. We have
two choices, either to attack I/O now and get it over with, or to postpone
I/O until near the end. Neither prospect is very attractive, so let's
get it over with.

The basic operations we need to do are (1)~inputting and outputting of
text, to or from a file or the user's terminal; (2)~inputting and
outputting of eight-bit bytes, to or from a file; (3)~instructing the
operating system to initiate (``open'') or to terminate (``close'') input or
output from a specified file; (4)~testing whether the end of an input
file has been reached.

\TeX\ needs to deal with two kinds of files.
We shall use the term |alpha_file| for a file that contains textual data,
and the term |byte_file| for a file that contains eight-bit binary information.
These two types turn out to be the same on many computers, but
sometimes there is a significant distinction, so we shall be careful to
distinguish between them. Standard protocols for transferring
such files from computer to computer, via high-speed networks, are
now becoming available to more and more communities of users.

The program actually makes use also of a third kind of file, called a
|word_file|, when dumping and reloading base information for its own
initialization.  We shall define a word file later; but it will be possible
for us to specify simple operations on word files before they are defined.

@<Types...@>=
@!eight_bits=0..255; {unsigned one-byte quantity}
@!alpha_file=packed file of text_char; {files that contain textual data}
@!byte_file=packed file of eight_bits; {files that contain binary data}

@ Most of what we need to do with respect to input and output can be handled
by the I/O facilities that are standard in \PASCAL, i.e., the routines
called |get|, |put|, |eof|, and so on. But
standard \PASCAL\ does not allow file variables to be associated with file
names that are determined at run time, so it cannot be used to implement
\TeX; some sort of extension to \PASCAL's ordinary |reset| and |rewrite|
is crucial for our purposes. We shall assume that |name_of_file| is a variable
of an appropriate type such that the \PASCAL\ run-time system being used to
implement \TeX\ can open a file whose external name is specified by
|name_of_file|.
@^system dependencies@>

@<Glob...@>=
@!name_of_file:packed array[1..file_name_size] of char;@;@/
  {on some systems this may be a \&{record} variable}
@!name_length:0..file_name_size;@/{this many characters are actually
  relevant in |name_of_file| (the rest are blank)}

@ The \ph\ compiler with which the present version of \TeX\ was prepared has
extended the rules of \PASCAL\ in a very convenient way. To open file~|f|,
we can write
$$\vbox{\halign{#\hfil\qquad&#\hfil\cr
|reset(f,@t\\{name}@>,'/O')|&for input;\cr
|rewrite(f,@t\\{name}@>,'/O')|&for output.\cr}}$$
The `\\{name}' parameter, which is of type `{\bf packed array
$[\langle\\{any}\rangle]$ of \\{char}}', stands for the name of
the external file that is being opened for input or output.
Blank spaces that might appear in \\{name} are ignored.

The `\.{/O}' parameter tells the operating system not to issue its own
error messages if something goes wrong. If a file of the specified name
cannot be found, or if such a file cannot be opened for some other reason
(e.g., someone may already be trying to write the same file), we will have
|@!erstat(f)<>0| after an unsuccessful |reset| or |rewrite|.  This allows
\TeX\ to undertake appropriate corrective action.
@:PASCAL H}{\ph@>
@^system dependencies@>

\TeX's file-opening procedures return |false| if no file identified by
|name_of_file| could be opened.

@d reset_OK(#)==erstat(#)=0
@d rewrite_OK(#)==erstat(#)=0

@p function a_open_in(var f:alpha_file):boolean;
  {open a text file for input}
begin reset(f,name_of_file,'/O'); a_open_in:=reset_OK(f);
end;
@#
function a_open_out(var f:alpha_file):boolean;
  {open a text file for output}
begin rewrite(f,name_of_file,'/O'); a_open_out:=rewrite_OK(f);
end;
@#
function b_open_in(var f:byte_file):boolean;
  {open a binary file for input}
begin reset(f,name_of_file,'/O'); b_open_in:=reset_OK(f);
end;
@#
function b_open_out(var f:byte_file):boolean;
  {open a binary file for output}
begin rewrite(f,name_of_file,'/O'); b_open_out:=rewrite_OK(f);
end;
@#
function w_open_in(var f:word_file):boolean;
  {open a word file for input}
begin reset(f,name_of_file,'/O'); w_open_in:=reset_OK(f);
end;
@#
function w_open_out(var f:word_file):boolean;
  {open a word file for output}
begin rewrite(f,name_of_file,'/O'); w_open_out:=rewrite_OK(f);
end;

@ Files can be closed with the \ph\ routine `|close(f)|', which
@^system dependencies@>
should be used when all input or output with respect to |f| has been completed.
This makes |f| available to be opened again, if desired; and if |f| was used for
output, the |close| operation makes the corresponding external file appear
on the user's area, ready to be read.

These procedures should not generate error messages if a file is
being closed before it has been successfully opened.

@p procedure a_close(var f:alpha_file); {close a text file}
begin close(f);
end;
@#
procedure b_close(var f:byte_file); {close a binary file}
begin close(f);
end;
@#
procedure w_close(var f:word_file); {close a word file}
begin close(f);
end;

@ Binary input and output are done with \PASCAL's ordinary |get| and |put|
procedures, so we don't have to make any other special arrangements for
binary~I/O. Text output is also easy to do with standard \PASCAL\ routines.
The treatment of text input is more difficult, however, because
of the necessary translation to |ASCII_code| values.
\TeX's conventions should be efficient, and they should
blend nicely with the user's operating environment.

@ Input from text files is read one line at a time, using a routine called
|input_ln|. This function is defined in terms of global variables called
|buffer|, |first|, and |last| that will be described in detail later; for
now, it suffices for us to know that |buffer| is an array of |ASCII_code|
values, and that |first| and |last| are indices into this array
representing the beginning and ending of a line of text.

@<Glob...@>=
@!buffer:array[0..buf_size] of ASCII_code; {lines of characters being read}
@!first:0..buf_size; {the first unused position in |buffer|}
@!last:0..buf_size; {end of the line just input to |buffer|}
@!max_buf_stack:0..buf_size; {largest index used in |buffer|}

@ The |input_ln| function brings the next line of input from the specified
file into available positions of the buffer array and returns the value
|true|, unless the file has already been entirely read, in which case it
returns |false| and sets |last:=first|.  In general, the |ASCII_code|
numbers that represent the next line of the file are input into
|buffer[first]|, |buffer[first+1]|, \dots, |buffer[last-1]|; and the
global variable |last| is set equal to |first| plus the length of the
line. Trailing blanks are removed from the line; thus, either |last=first|
(in which case the line was entirely blank) or |buffer[last-1]<>" "|.

An overflow error is given, however, if the normal actions of |input_ln|
would make |last>=buf_size|; this is done so that other parts of \TeX\
can safely look at the contents of |buffer[last+1]| without overstepping
the bounds of the |buffer| array. Upon entry to |input_ln|, the condition
|first<buf_size| will always hold, so that there is always room for an
``empty'' line.

The variable |max_buf_stack|, which is used to keep track of how large
the |buf_size| parameter must be to accommodate the present job, is
also kept up to date by |input_ln|.

If the |bypass_eoln| parameter is |true|, |input_ln| will do a |get|
before looking at the first character of the line; this skips over
an |eoln| that was in |f^|. The procedure does not do a |get| when it
reaches the end of the line; therefore it can be used to acquire input
from the user's terminal as well as from ordinary text files.

Standard \PASCAL\ says that a file should have |eoln| immediately
before |eof|, but \TeX\ needs only a weaker restriction: If |eof|
occurs in the middle of a line, the system function |eoln| should return
a |true| result (even though |f^| will be undefined).

Since the inner loop of |input_ln| is part of \TeX's ``inner loop''---each
character of input comes in at this place---it is wise to reduce system
overhead by making use of special routines that read in an entire array
of characters at once, if such routines are available. The following
code uses standard \PASCAL\ to illustrate what needs to be done, but
finer tuning is often possible at well-developed \PASCAL\ sites.
@^inner loop@>

@p function input_ln(var f:alpha_file;@!bypass_eoln:boolean):boolean;
  {inputs the next line or returns |false|}
var last_nonblank:0..buf_size; {|last| with trailing blanks removed}
begin if bypass_eoln then if not eof(f) then get(f);
  {input the first character of the line into |f^|}
last:=first; {cf.\ Matthew 19\thinspace:\thinspace30}
if eof(f) then input_ln:=false
else  begin last_nonblank:=first;
  while not eoln(f) do
    begin if last>=max_buf_stack then
      begin max_buf_stack:=last+1;
      if max_buf_stack=buf_size then
        @<Report overflow of the input buffer, and abort@>;
      end;
    buffer[last]:=xord[f^]; get(f); incr(last);
    if buffer[last-1]<>" " then last_nonblank:=last;
    end;
  last:=last_nonblank; input_ln:=true;
  end;
end;

@ The user's terminal acts essentially like other files of text, except
that it is used both for input and for output. When the terminal is
considered an input file, the file variable is called |term_in|, and when it
is considered an output file the file variable is |term_out|.
@^system dependencies@>

@<Glob...@>=
@!term_in:alpha_file; {the terminal as an input file}
@!term_out:alpha_file; {the terminal as an output file}

@ Here is how to open the terminal files
in \ph. The `\.{/I}' switch suppresses the first |get|.
@^system dependencies@>

@d t_open_in==reset(term_in,'TTY:','/O/I') {open the terminal for text input}
@d t_open_out==rewrite(term_out,'TTY:','/O') {open the terminal for text output}

@ Sometimes it is necessary to synchronize the input/output mixture that
happens on the user's terminal, and three system-dependent
procedures are used for this
purpose. The first of these, |update_terminal|, is called when we want
to make sure that everything we have output to the terminal so far has
actually left the computer's internal buffers and been sent.
The second, |clear_terminal|, is called when we wish to cancel any
input that the user may have typed ahead (since we are about to
issue an unexpected error message). The third, |wake_up_terminal|,
is supposed to revive the terminal if the user has disabled it by
some instruction to the operating system.  The following macros show how
these operations can be specified in \ph:
@^system dependencies@>

@d update_terminal == break(term_out) {empty the terminal output buffer}
@d clear_terminal == break_in(term_in,true) {clear the terminal input buffer}
@d wake_up_terminal == do_nothing {cancel the user's cancellation of output}

@ We need a special routine to read the first line of \TeX\ input from
the user's terminal. This line is different because it is read before we
have opened the transcript file; there is sort of a ``chicken and
egg'' problem here. If the user types `\.{\\input paper}' on the first
line, or if some macro invoked by that line does such an \.{\\input},
the transcript file will be named `\.{paper.log}'; but if no \.{\\input}
commands are performed during the first line of terminal input, the transcript
file will acquire its default name `\.{texput.log}'. (The transcript file
will not contain error messages generated by the first line before the
first \.{\\input} command.)
@.texput@>

The first line is even more special if we are lucky enough to have an operating
system that treats \TeX\ differently from a run-of-the-mill \PASCAL\ object
program. It's nice to let the user start running a \TeX\ job by typing
a command line like `\.{tex paper}'; in such a case, \TeX\ will operate
as if the first line of input were `\.{paper}', i.e., the first line will
consist of the remainder of the command line, after the part that invoked
\TeX.

The first line is special also because it may be read before \TeX\ has
input a format file. In such cases, normal error messages cannot yet
be given. The following code uses concepts that will be explained later.
(If the \PASCAL\ compiler does not support non-local |@!goto|\unskip, the
@^system dependencies@>
statement `|goto final_end|' should be replaced by something that
quietly terminates the program.)

@<Report overflow of the input buffer, and abort@>=
if format_ident=0 then
  begin write_ln(term_out,'Buffer size exceeded!'); goto final_end;
@.Buffer size exceeded@>
  end
else begin cur_input.loc_field:=first; cur_input.limit_field:=last-1;
  overflow("buffer size",buf_size);
@:TeX capacity exceeded buffer size}{\quad buffer size@>
  end

@ Different systems have different ways to get started. But regardless of
what conventions are adopted, the routine that initializes the terminal
should satisfy the following specifications:

\yskip\textindent{1)}It should open file |term_in| for input from the
  terminal. (The file |term_out| will already be open for output to the
  terminal.)

\textindent{2)}If the user has given a command line, this line should be
  considered the first line of terminal input. Otherwise the
  user should be prompted with `\.{**}', and the first line of input
  should be whatever is typed in response.

\textindent{3)}The first line of input, which might or might not be a
  command line, should appear in locations |first| to |last-1| of the
  |buffer| array.

\textindent{4)}The global variable |loc| should be set so that the
  character to be read next by \TeX\ is in |buffer[loc]|. This
  character should not be blank, and we should have |loc<last|.

\yskip\noindent(It may be necessary to prompt the user several times
before a non-blank line comes in. The prompt is `\.{**}' instead of the
later `\.*' because the meaning is slightly different: `\.{\\input}' need
not be typed immediately after~`\.{**}'.)

@d loc==cur_input.loc_field {location of first unread character in |buffer|}

@ The following program does the required initialization
without retrieving a possible command line.
It should be clear how to modify this routine to deal with command lines,
if the system permits them.
@^system dependencies@>

@p function init_terminal:boolean; {gets the terminal input started}
label exit;
begin t_open_in;
loop@+begin wake_up_terminal; write(term_out,'**'); update_terminal;
@.**@>
  if not input_ln(term_in,true) then {this shouldn't happen}
    begin write_ln(term_out);
    write(term_out,'! End of file on the terminal... why?');
@.End of file on the terminal@>
    init_terminal:=false; return;
    end;
  loc:=first;
  while (loc<last)and(buffer[loc]=" ") do incr(loc);
  if loc<last then
    begin init_terminal:=true;
    return; {return unless the line was all blank}
    end;
  write_ln(term_out,'Please type the name of your input file.');
  end;
exit:end;

@* \[4] String handling.
Control sequence names and diagnostic messages are variable-length strings
of eight-bit characters. Since \PASCAL\ does not have a well-developed string
mechanism, \TeX\ does all of its string processing by homegrown methods.

Elaborate facilities for dynamic strings are not needed, so all of the
necessary operations can be handled with a simple data structure.
The array |str_pool| contains all of the (eight-bit) ASCII codes in all
of the strings, and the array |str_start| contains indices of the starting
points of each string. Strings are referred to by integer numbers, so that
string number |s| comprises the characters |str_pool[j]| for
|str_start[s]<=j<str_start[s+1]|. Additional integer variables
|pool_ptr| and |str_ptr| indicate the number of entries used so far
in |str_pool| and |str_start|, respectively; locations
|str_pool[pool_ptr]| and |str_start[str_ptr]| are
ready for the next string to be allocated.

String numbers 0 to 255 are reserved for strings that correspond to single
ASCII characters. This is in accordance with the conventions of \.{WEB},
@.WEB@>
which converts single-character strings into the ASCII code number of the
single character involved, while it converts other strings into integers
and builds a string pool file. Thus, when the string constant \.{"."} appears
in the program below, \.{WEB} converts it into the integer 46, which is the
ASCII code for a period, while \.{WEB} will convert a string like \.{"hello"}
into some integer greater than~255. String number 46 will presumably be the
single character `\..'; but some ASCII codes have no standard visible
representation, and \TeX\ sometimes needs to be able to print an arbitrary
ASCII character, so the first 256 strings are used to specify exactly what
should be printed for each of the 256 possibilities.

Elements of the |str_pool| array must be ASCII codes that can actually
be printed; i.e., they must have an |xchr| equivalent in the local
character set. (This restriction applies only to preloaded strings,
not to those generated dynamically by the user.)

Some \PASCAL\ compilers won't pack integers into a single byte unless the
integers lie in the range |-128..127|. To accommodate such systems
we access the string pool only via macros that can easily be redefined.

@d si(#) == # {convert from |ASCII_code| to |packed_ASCII_code|}
@d so(#) == # {convert from |packed_ASCII_code| to |ASCII_code|}

@<Types...@>=
@!pool_pointer = 0..pool_size; {for variables that point into |str_pool|}
@!str_number = 0..max_strings; {for variables that point into |str_start|}
@!packed_ASCII_code = 0..255; {elements of |str_pool| array}

@ @<Glob...@>=
@!str_pool:packed array[pool_pointer] of packed_ASCII_code; {the characters}
@!str_start : array[str_number] of pool_pointer; {the starting pointers}
@!pool_ptr : pool_pointer; {first unused position in |str_pool|}
@!str_ptr : str_number; {number of the current string being created}
@!init_pool_ptr : pool_pointer; {the starting value of |pool_ptr|}
@!init_str_ptr : str_number; {the starting value of |str_ptr|}

@ Several of the elementary string operations are performed using \.{WEB}
macros instead of \PASCAL\ procedures, because many of the
operations are done quite frequently and we want to avoid the
overhead of procedure calls. For example, here is
a simple macro that computes the length of a string.
@.WEB@>

@d length(#)==(str_start[#+1]-str_start[#]) {the number of characters
  in string number \#}

@ The length of the current string is called |cur_length|:

@d cur_length == (pool_ptr - str_start[str_ptr])

@ Strings are created by appending character codes to |str_pool|.
The |append_char| macro, defined here, does not check to see if the
value of |pool_ptr| has gotten too high; this test is supposed to be
made before |append_char| is used. There is also a |flush_char|
macro, which erases the last character appended.

To test if there is room to append |l| more characters to |str_pool|,
we shall write |str_room(l)|, which aborts \TeX\ and gives an
apologetic error message if there isn't enough room.

@d append_char(#) == {put |ASCII_code| \# at the end of |str_pool|}
begin str_pool[pool_ptr]:=si(#); incr(pool_ptr);
end
@d flush_char == decr(pool_ptr) {forget the last character in the pool}
@d str_room(#) == {make sure that the pool hasn't overflowed}
  begin if pool_ptr+# > pool_size then
  overflow("pool size",pool_size-init_pool_ptr);
@:TeX capacity exceeded pool size}{\quad pool size@>
  end

@ Once a sequence of characters has been appended to |str_pool|, it
officially becomes a string when the function |make_string| is called.
This function returns the identification number of the new string as its
value.

@p function make_string : str_number; {current string enters the pool}
begin if str_ptr=max_strings then
  overflow("number of strings",max_strings-init_str_ptr);
@:TeX capacity exceeded number of strings}{\quad number of strings@>
incr(str_ptr); str_start[str_ptr]:=pool_ptr;
make_string:=str_ptr-1;
end;

@ To destroy the most recently made string, we say |flush_string|.

@d flush_string==begin decr(str_ptr); pool_ptr:=str_start[str_ptr];
  end

@ The following subroutine compares string |s| with another string of the
same length that appears in |buffer| starting at position |k|;
the result is |true| if and only if the strings are equal.
Empirical tests indicate that |str_eq_buf| is used in such a way that
it tends to return |true| about 80 percent of the time.

@p function str_eq_buf(@!s:str_number;@!k:integer):boolean;
  {test equality of strings}
label not_found; {loop exit}
var j: pool_pointer; {running index}
@!result: boolean; {result of comparison}
begin j:=str_start[s];
while j<str_start[s+1] do
  begin if so(str_pool[j])<>buffer[k] then
    begin result:=false; goto not_found;
    end;
  incr(j); incr(k);
  end;
result:=true;
not_found: str_eq_buf:=result;
end;

@ Here is a similar routine, but it compares two strings in the string pool,
and it does not assume that they have the same length.

@p function str_eq_str(@!s,@!t:str_number):boolean;
  {test equality of strings}
label not_found; {loop exit}
var j,@!k: pool_pointer; {running indices}
@!result: boolean; {result of comparison}
begin result:=false;
if length(s)<>length(t) then goto not_found;
j:=str_start[s]; k:=str_start[t];
while j<str_start[s+1] do
  begin if str_pool[j]<>str_pool[k] then goto not_found;
  incr(j); incr(k);
  end;
result:=true;
not_found: str_eq_str:=result;
end;

@ The initial values of |str_pool|, |str_start|, |pool_ptr|,
and |str_ptr| are computed by the \.{INITEX} program, based in part
on the information that \.{WEB} has output while processing \TeX.
@.INITEX@>
@^string pool@>

@p @!init function get_strings_started:boolean; {initializes the string pool,
  but returns |false| if something goes wrong}
label done,exit;
var k,@!l:0..255; {small indices or counters}
@!m,@!n:text_char; {characters input from |pool_file|}
@!g:str_number; {garbage}
@!a:integer; {accumulator for check sum}
@!c:boolean; {check sum has been checked}
begin pool_ptr:=0; str_ptr:=0; str_start[0]:=0;
@<Make the first 256 strings@>;
@<Read the other strings from the \.{TEX.POOL} file and return |true|,
  or give an error message and return |false|@>;
exit:end;
tini

@ @d app_lc_hex(#)==l:=#;
  if l<10 then append_char(l+"0")@+else append_char(l-10+"a")

@<Make the first 256...@>=
for k:=0 to 255 do
  begin if (@<Character |k| cannot be printed@>) then
    begin append_char("^"); append_char("^");
    if k<@'100 then append_char(k+@'100)
    else if k<@'200 then append_char(k-@'100)
    else begin app_lc_hex(k div 16); app_lc_hex(k mod 16);
      end;
    end
  else append_char(k);
  g:=make_string;
  end

@ The first 128 strings will contain 95 standard ASCII characters, and the
other 33 characters will be printed in three-symbol form like `\.{\^\^A}'
unless a system-dependent change is made here. Installations that have
an extended character set, where for example |xchr[@'32]=@t\.{\'^^Z\'}@>|,
would like string @'32 to be the single character @'32 instead of the
three characters @'136, @'136, @'132 (\.{\^\^Z}). On the other hand,
even people with an extended character set will want to represent string
@'15 by \.{\^\^M}, since @'15 is |carriage_return|; the idea is to
produce visible strings instead of tabs or line-feeds or carriage-returns
or bell-rings or characters that are treated anomalously in text files.

Unprintable characters of codes 128--255 are, similarly, rendered
\.{\^\^80}--\.{\^\^ff}.

The boolean expression defined here should be |true| unless \TeX\
internal code number~|k| corresponds to a non-troublesome visible
symbol in the local character set.  An appropriate formula for the
extended character set recommended in {\sl The \TeX book\/} would, for
example, be `|k in [0,@'10..@'12,@'14,@'15,@'33,@'177..@'377]|'.
If character |k| cannot be printed, and |k<@'200|, then character |k+@'100| or
|k-@'100| must be printable; moreover, ASCII codes |[@'41..@'46,
@'60..@'71, @'141..@'146, @'160..@'171]| must be printable.
Thus, at least 80 printable characters are needed.
@:TeXbook}{\sl The \TeX book@>
@^character set dependencies@>
@^system dependencies@>

@<Character |k| cannot be printed@>=
  (k<" ")or(k>"~")

@ When the \.{WEB} system program called \.{TANGLE} processes the \.{TEX.WEB}
description that you are now reading, it outputs the \PASCAL\ program
\.{TEX.PAS} and also a string pool file called \.{TEX.POOL}. The \.{INITEX}
@.WEB@>@.INITEX@>
program reads the latter file, where each string appears as a two-digit decimal
length followed by the string itself, and the information is recorded in
\TeX's string memory.

@<Glob...@>=
@!init @!pool_file:alpha_file; {the string-pool file output by \.{TANGLE}}
tini

@ @d bad_pool(#)==begin wake_up_terminal; write_ln(term_out,#);
  a_close(pool_file); get_strings_started:=false; return;
  end
@<Read the other strings...@>=
name_of_file:=pool_name; {we needn't set |name_length|}
if a_open_in(pool_file) then
  begin c:=false;
  repeat @<Read one string, but return |false| if the
    string memory space is getting too tight for comfort@>;
  until c;
  a_close(pool_file); get_strings_started:=true;
  end
else  bad_pool('! I can''t read TEX.POOL.')
@.I can't read TEX.POOL@>

@ @<Read one string...@>=
begin if eof(pool_file) then bad_pool('! TEX.POOL has no check sum.');
@.TEX.POOL has no check sum@>
read(pool_file,m,n); {read two digits of string length}
if m='*' then @<Check the pool check sum@>
else  begin if (xord[m]<"0")or(xord[m]>"9")or@|
      (xord[n]<"0")or(xord[n]>"9") then
    bad_pool('! TEX.POOL line doesn''t begin with two digits.');
@.TEX.POOL line doesn't...@>
  l:=xord[m]*10+xord[n]-"0"*11; {compute the length}
  if pool_ptr+l+string_vacancies>pool_size then
    bad_pool('! You have to increase POOLSIZE.');
@.You have to increase POOLSIZE@>
  for k:=1 to l do
    begin if eoln(pool_file) then m:=' '@+else read(pool_file,m);
    append_char(xord[m]);
    end;
  read_ln(pool_file); g:=make_string;
  end;
end

@ The \.{WEB} operation \.{@@\$} denotes the value that should be at the
end of this \.{TEX.POOL} file; any other value means that the wrong pool
file has been loaded.
@^check sum@>

@<Check the pool check sum@>=
begin a:=0; k:=1;
loop@+  begin if (xord[n]<"0")or(xord[n]>"9") then
  bad_pool('! TEX.POOL check sum doesn''t have nine digits.');
@.TEX.POOL check sum...@>
  a:=10*a+xord[n]-"0";
  if k=9 then goto done;
  incr(k); read(pool_file,n);
  end;
done: if a<>@$ then bad_pool('! TEX.POOL doesn''t match; TANGLE me again.');
@.TEX.POOL doesn't match@>
c:=true;
end

@* \[5] On-line and off-line printing.
Messages that are sent to a user's terminal and to the transcript-log file
are produced by several `|print|' procedures. These procedures will
direct their output to a variety of places, based on the setting of
the global variable |selector|, which has the following possible
values:

\yskip
\hang |term_and_log|, the normal setting, prints on the terminal and on the
  transcript file.

\hang |log_only|, prints only on the transcript file.

\hang |term_only|, prints only on the terminal.

\hang |no_print|, doesn't print at all. This is used only in rare cases
  before the transcript file is open.

\hang |pseudo|, puts output into a cyclic buffer that is used
  by the |show_context| routine; when we get to that routine we shall discuss
  the reasoning behind this curious mode.

\hang |new_string|, appends the output to the current string in the
  string pool.

\hang 0 to 15, prints on one of the sixteen files for \.{\\write} output.

\yskip
\noindent The symbolic names `|term_and_log|', etc., have been assigned
numeric codes that satisfy the convenient relations |no_print+1=term_only|,
|no_print+2=log_only|, |term_only+2=log_only+1=term_and_log|.

Three additional global variables, |tally| and |term_offset| and
|file_offset|, record the number of characters that have been printed
since they were most recently cleared to zero. We use |tally| to record
the length of (possibly very long) stretches of printing; |term_offset|
and |file_offset|, on the other hand, keep track of how many characters
have appeared so far on the current line that has been output to the
terminal or to the transcript file, respectively.

@d no_print=16 {|selector| setting that makes data disappear}
@d term_only=17 {printing is destined for the terminal only}
@d log_only=18 {printing is destined for the transcript file only}
@d term_and_log=19 {normal |selector| setting}
@d pseudo=20 {special |selector| setting for |show_context|}
@d new_string=21 {printing is deflected to the string pool}
@d max_selector=21 {highest selector setting}

@<Glob...@>=
@!log_file : alpha_file; {transcript of \TeX\ session}
@!selector : 0..max_selector; {where to print a message}
@!dig : array[0..22] of 0..15; {digits in a number being output}
@!tally : integer; {the number of characters recently printed}
@!term_offset : 0..max_print_line;
  {the number of characters on the current terminal line}
@!file_offset : 0..max_print_line;
  {the number of characters on the current file line}
@!trick_buf:array[0..error_line] of ASCII_code; {circular buffer for
  pseudoprinting}
@!trick_count: integer; {threshold for pseudoprinting, explained later}
@!first_count: integer; {another variable for pseudoprinting}

@ @<Initialize the output routines@>=
selector:=term_only; tally:=0; term_offset:=0; file_offset:=0;

@ Macro abbreviations for output to the terminal and to the log file are
defined here for convenience. Some systems need special conventions
for terminal output, and it is possible to adhere to those conventions
by changing |wterm|, |wterm_ln|, and |wterm_cr| in this section.
@^system dependencies@>

@d wterm(#)==write(term_out,#)
@d wterm_ln(#)==write_ln(term_out,#)
@d wterm_cr==write_ln(term_out)
@d wlog(#)==write(log_file,#)
@d wlog_ln(#)==write_ln(log_file,#)
@d wlog_cr==write_ln(log_file)

@ To end a line of text output, we call |print_ln|.

@<Basic print...@>=
procedure print_ln; {prints an end-of-line}
begin case selector of
term_and_log: begin wterm_cr; wlog_cr;
  term_offset:=0; file_offset:=0;
  end;
log_only: begin wlog_cr; file_offset:=0;
  end;
term_only: begin wterm_cr; term_offset:=0;
  end;
no_print,pseudo,new_string: do_nothing;
othercases write_ln(write_file[selector])
endcases;@/
end; {|tally| is not affected}

@ The |print_char| procedure sends one character to the desired destination,
using the |xchr| array to map it into an external character compatible with
|input_ln|. All printing comes through |print_ln| or |print_char|.

@<Basic printing...@>=
procedure print_char(@!s:ASCII_code); {prints a single character}
label exit;
begin if @<Character |s| is the current new-line character@> then
 if selector<pseudo then
  begin print_ln; return;
  end;
case selector of
term_and_log: begin wterm(xchr[s]); wlog(xchr[s]);
  incr(term_offset); incr(file_offset);
  if term_offset=max_print_line then
    begin wterm_cr; term_offset:=0;
    end;
  if file_offset=max_print_line then
    begin wlog_cr; file_offset:=0;
    end;
  end;
log_only: begin wlog(xchr[s]); incr(file_offset);
  if file_offset=max_print_line then print_ln;
  end;
term_only: begin wterm(xchr[s]); incr(term_offset);
  if term_offset=max_print_line then print_ln;
  end;
no_print: do_nothing;
pseudo: if tally<trick_count then trick_buf[tally mod error_line]:=s;
new_string: begin if pool_ptr<pool_size then append_char(s);
  end; {we drop characters if the string space is full}
othercases write(write_file[selector],xchr[s])
endcases;@/
incr(tally);
exit:end;

@ An entire string is output by calling |print|. Note that if we are outputting
the single standard ASCII character \.c, we could call |print("c")|, since
|"c"=99| is the number of a single-character string, as explained above. But
|print_char("c")| is quicker, so \TeX\ goes directly to the |print_char|
routine when it knows that this is safe. (The present implementation
assumes that it is always safe to print a visible ASCII character.)
@^system dependencies@>

@<Basic print...@>=
procedure print(@!s:integer); {prints string |s|}
label exit;
var j:pool_pointer; {current character code position}
@!nl:integer; {new-line character to restore}
begin if s>=str_ptr then s:="???" {this can't happen}
@.???@>
else if s<256 then
  if s<0 then s:="???" {can't happen}
  else begin if selector>pseudo then
      begin print_char(s); return; {internal strings are not expanded}
      end;
    if (@<Character |s| is the current new-line character@>) then
      if selector<pseudo then
        begin print_ln; return;
        end;
    nl:=new_line_char; new_line_char:=-1;
      {temporarily disable new-line character}
    j:=str_start[s];
    while j<str_start[s+1] do
      begin print_char(so(str_pool[j])); incr(j);
      end;
    new_line_char:=nl; return;
    end;
j:=str_start[s];
while j<str_start[s+1] do
  begin print_char(so(str_pool[j])); incr(j);
  end;
exit:end;

@ Control sequence names, file names, and strings constructed with
\.{\\string} might contain |ASCII_code| values that can't
be printed using |print_char|. Therefore we use |slow_print| for them:

@<Basic print...@>=
procedure slow_print(@!s:integer); {prints string |s|}
var j:pool_pointer; {current character code position}
begin if (s>=str_ptr) or (s<256) then print(s)
else begin j:=str_start[s];
  while j<str_start[s+1] do
    begin print(so(str_pool[j])); incr(j);
    end;
  end;
end;

@ Here is the very first thing that \TeX\ prints: a headline that identifies
the version number and format package. The |term_offset| variable is temporarily
incorrect, but the discrepancy is not serious since we assume that the banner
and format identifier together will occupy at most |max_print_line|
character positions.

@<Initialize the output...@>=
wterm(banner);
if format_ident=0 then wterm_ln(' (no format preloaded)')
else  begin slow_print(format_ident); print_ln;
  end;
update_terminal;

@ The procedure |print_nl| is like |print|, but it makes sure that the
string appears at the beginning of a new line.

@<Basic print...@>=
procedure print_nl(@!s:str_number); {prints string |s| at beginning of line}
begin if ((term_offset>0)and(odd(selector)))or@|
  ((file_offset>0)and(selector>=log_only)) then print_ln;
print(s);
end;

@ The procedure |print_esc| prints a string that is preceded by
the user's escape character (which is usually a backslash).

@<Basic print...@>=
procedure print_esc(@!s:str_number); {prints escape character, then |s|}
var c:integer; {the escape character code}
begin  @<Set variable |c| to the current escape character@>;
if c>=0 then if c<256 then print(c);
slow_print(s);
end;

@ An array of digits in the range |0..15| is printed by |print_the_digs|.

@<Basic print...@>=
procedure print_the_digs(@!k:eight_bits);
  {prints |dig[k-1]|$\,\ldots\,$|dig[0]|}
begin while k>0 do
  begin decr(k);
  if dig[k]<10 then print_char("0"+dig[k])
  else print_char("A"-10+dig[k]);
  end;
end;

@ The following procedure, which prints out the decimal representation of a
given integer |n|, has been written carefully so that it works properly
if |n=0| or if |(-n)| would cause overflow. It does not apply |mod| or |div|
to negative arguments, since such operations are not implemented consistently
by all \PASCAL\ compilers.

@<Basic print...@>=
procedure print_int(@!n:integer); {prints an integer in decimal form}
var k:0..23; {index to current digit; we assume that $|n|<10^{23}$}
@!m:integer; {used to negate |n| in possibly dangerous cases}
begin k:=0;
if n<0 then
  begin print_char("-");
  if n>-100000000 then negate(n)
  else  begin m:=-1-n; n:=m div 10; m:=(m mod 10)+1; k:=1;
    if m<10 then dig[0]:=m
    else  begin dig[0]:=0; incr(n);
      end;
    end;
  end;
repeat dig[k]:=n mod 10; n:=n div 10; incr(k);
until n=0;
print_the_digs(k);
end;

@ Here is a trivial procedure to print two digits; it is usually called with
a parameter in the range |0<=n<=99|.

@p procedure print_two(@!n:integer); {prints two least significant digits}
begin n:=abs(n) mod 100; print_char("0"+(n div 10));
print_char("0"+(n mod 10));
end;

@ Hexadecimal printing of nonnegative integers is accomplished by |print_hex|.

@p procedure print_hex(@!n:integer);
  {prints a positive integer in hexadecimal form}
var k:0..22; {index to current digit; we assume that $0\L n<16^{22}$}
begin k:=0; print_char("""");
repeat dig[k]:=n mod 16; n:=n div 16; incr(k);
until n=0;
print_the_digs(k);
end;

@ Old versions of \TeX\ needed a procedure called |print_ASCII| whose function
is now subsumed by |print|. We retain the old name here as a possible aid to
future software arch\ae ologists.

@d print_ASCII == print

@ Roman numerals are produced by the |print_roman_int| routine.  Readers
who like puzzles might enjoy trying to figure out how this tricky code
works; therefore no explanation will be given. Notice that 1990 yields
\.{mcmxc}, not \.{mxm}.

@p procedure print_roman_int(@!n:integer);
label exit;
var j,@!k: pool_pointer; {mysterious indices into |str_pool|}
@!u,@!v: nonnegative_integer; {mysterious numbers}
begin j:=str_start["m2d5c2l5x2v5i"]; v:=1000;
loop@+  begin while n>=v do
    begin print_char(so(str_pool[j])); n:=n-v;
    end;
  if n<=0 then return; {nonpositive input produces no output}
  k:=j+2; u:=v div (so(str_pool[k-1])-"0");
  if str_pool[k-1]=si("2") then
    begin k:=k+2; u:=u div (so(str_pool[k-1])-"0");
    end;
  if n+u>=v then
    begin print_char(so(str_pool[k])); n:=n+u;
    end
  else  begin j:=j+2; v:=v div (so(str_pool[j-1])-"0");
    end;
  end;
exit:end;

@ The |print| subroutine will not print a string that is still being
created. The following procedure will.

@p procedure print_current_string; {prints a yet-unmade string}
var j:pool_pointer; {points to current character code}
begin j:=str_start[str_ptr];
while j<pool_ptr do
  begin print_char(so(str_pool[j])); incr(j);
  end;
end;

@ Here is a procedure that asks the user to type a line of input,
assuming that the |selector| setting is either |term_only| or |term_and_log|.
The input is placed into locations |first| through |last-1| of the
|buffer| array, and echoed on the transcript file if appropriate.

This procedure is never called when |interaction<scroll_mode|.

@d prompt_input(#)==begin wake_up_terminal; print(#); term_input;
    end {prints a string and gets a line of input}

@p procedure term_input; {gets a line from the terminal}
var k:0..buf_size; {index into |buffer|}
begin update_terminal; {now the user sees the prompt for sure}
if not input_ln(term_in,true) then fatal_error("End of file on the terminal!");
@.End of file on the terminal@>
term_offset:=0; {the user's line ended with \<\rm return>}
decr(selector); {prepare to echo the input}
if last<>first then for k:=first to last-1 do print(buffer[k]);
print_ln; incr(selector); {restore previous status}
end;

@* \[6] Reporting errors.
When something anomalous is detected, \TeX\ typically does something like this:
$$\vbox{\halign{#\hfil\cr
|print_err("Something anomalous has been detected");|\cr
|help3("This is the first line of my offer to help.")|\cr
|("This is the second line. I'm trying to")|\cr
|("explain the best way for you to proceed.");|\cr
|error;|\cr}}$$
A two-line help message would be given using |help2|, etc.; these informal
helps should use simple vocabulary that complements the words used in the
official error message that was printed. (Outside the U.S.A., the help
messages should preferably be translated into the local vernacular. Each
line of help is at most 60 characters long, in the present implementation,
so that |max_print_line| will not be exceeded.)

The |print_err| procedure supplies a `\.!' before the official message,
and makes sure that the terminal is awake if a stop is going to occur.
The |error| procedure supplies a `\..' after the official message, then it
shows the location of the error; and if |interaction=error_stop_mode|,
it also enters into a dialog with the user, during which time the help
message may be printed.
@^system dependencies@>

@ The global variable |interaction| has four settings, representing increasing
amounts of user interaction:

@d batch_mode=0 {omits all stops and omits terminal output}
@d nonstop_mode=1 {omits all stops}
@d scroll_mode=2 {omits error stops}
@d error_stop_mode=3 {stops at every opportunity to interact}
@d print_err(#)==begin if interaction=error_stop_mode then wake_up_terminal;
  print_nl("! "); print(#);
  end

@<Glob...@>=
@!interaction:batch_mode..error_stop_mode; {current level of interaction}

@ @<Set init...@>=interaction:=error_stop_mode;

@ \TeX\ is careful not to call |error| when the print |selector| setting
might be unusual. The only possible values of |selector| at the time of
error messages are

\yskip\hang|no_print| (when |interaction=batch_mode|
  and |log_file| not yet open);

\hang|term_only| (when |interaction>batch_mode| and |log_file| not yet open);

\hang|log_only| (when |interaction=batch_mode| and |log_file| is open);

\hang|term_and_log| (when |interaction>batch_mode| and |log_file| is open).

@<Initialize the print |selector| based on |interaction|@>=
if interaction=batch_mode then selector:=no_print@+else selector:=term_only

@ A global variable |deletions_allowed| is set |false| if the |get_next|
routine is active when |error| is called; this ensures that |get_next|
and related routines like |get_token| will never be called recursively.
A similar interlock is provided by |set_box_allowed|.
@^recursion@>

The global variable |history| records the worst level of error that
has been detected. It has four possible values: |spotless|, |warning_issued|,
|error_message_issued|, and |fatal_error_stop|.

Another global variable, |error_count|, is increased by one when an
|error| occurs without an interactive dialog, and it is reset to zero at
the end of every paragraph.  If |error_count| reaches 100, \TeX\ decides
that there is no point in continuing further.

@d spotless=0 {|history| value when nothing has been amiss yet}
@d warning_issued=1 {|history| value when |begin_diagnostic| has been called}
@d error_message_issued=2 {|history| value when |error| has been called}
@d fatal_error_stop=3 {|history| value when termination was premature}

@<Glob...@>=
@!deletions_allowed:boolean; {is it safe for |error| to call |get_token|?}
@!set_box_allowed:boolean; {is it safe to do a \.{\\setbox} assignment?}
@!history:spotless..fatal_error_stop; {has the source input been clean so far?}
@!error_count:-1..100; {the number of scrolled errors since the
  last paragraph ended}

@ The value of |history| is initially |fatal_error_stop|, but it will
be changed to |spotless| if \TeX\ survives the initialization process.

@<Set init...@>=
deletions_allowed:=true; set_box_allowed:=true;
error_count:=0; {|history| is initialized elsewhere}

@ Since errors can be detected almost anywhere in \TeX, we want to declare the
error procedures near the beginning of the program. But the error procedures
in turn use some other procedures, which need to be declared |forward|
before we get to |error| itself.

It is possible for |error| to be called recursively if some error arises
when |get_token| is being used to delete a token, and/or if some fatal error
occurs while \TeX\ is trying to fix a non-fatal one. But such recursion
@^recursion@>
is never more than two levels deep.

@<Error handling...@>=
procedure@?normalize_selector; forward;@t\2@>@/
procedure@?get_token; forward;@t\2@>@/
procedure@?term_input; forward;@t\2@>@/
procedure@?show_context; forward;@t\2@>@/
procedure@?begin_file_reading; forward;@t\2@>@/
procedure@?open_log_file; forward;@t\2@>@/
procedure@?close_files_and_terminate; forward;@t\2@>@/
procedure@?clear_for_error_prompt; forward;@t\2@>@/
procedure@?give_err_help; forward;@t\2@>@/
@t\4\hskip-\fontdimen2\font@>@;@+@!debug@+procedure@?debug_help;
  forward;@;@+gubed

@ Individual lines of help are recorded in the array |help_line|, which
contains entries in positions |0..(help_ptr-1)|. They should be printed
in reverse order, i.e., with |help_line[0]| appearing last.

@d hlp1(#)==help_line[0]:=#;@+end
@d hlp2(#)==help_line[1]:=#; hlp1
@d hlp3(#)==help_line[2]:=#; hlp2
@d hlp4(#)==help_line[3]:=#; hlp3
@d hlp5(#)==help_line[4]:=#; hlp4
@d hlp6(#)==help_line[5]:=#; hlp5
@d help0==help_ptr:=0 {sometimes there might be no help}
@d help1==@+begin help_ptr:=1; hlp1 {use this with one help line}
@d help2==@+begin help_ptr:=2; hlp2 {use this with two help lines}
@d help3==@+begin help_ptr:=3; hlp3 {use this with three help lines}
@d help4==@+begin help_ptr:=4; hlp4 {use this with four help lines}
@d help5==@+begin help_ptr:=5; hlp5 {use this with five help lines}
@d help6==@+begin help_ptr:=6; hlp6 {use this with six help lines}

@<Glob...@>=
@!help_line:array[0..5] of str_number; {helps for the next |error|}
@!help_ptr:0..6; {the number of help lines present}
@!use_err_help:boolean; {should the |err_help| list be shown?}

@ @<Set init...@>=
help_ptr:=0; use_err_help:=false;

@ The |jump_out| procedure just cuts across all active procedure levels and
goes to |end_of_TEX|. This is the only nontrivial |@!goto| statement in the
whole program. It is used when there is no recovery from a particular error.

Some \PASCAL\ compilers do not implement non-local |goto| statements.
@^system dependencies@>
In such cases the body of |jump_out| should simply be
`|close_files_and_terminate|;\thinspace' followed by a call on some system
procedure that quietly terminates the program.

@<Error hand...@>=
procedure jump_out;
begin goto end_of_TEX;
end;

@ Here now is the general |error| routine.

@<Error hand...@>=
procedure error; {completes the job of error reporting}
label continue,exit;
var c:ASCII_code; {what the user types}
@!s1,@!s2,@!s3,@!s4:integer;
  {used to save global variables when deleting tokens}
begin if history<error_message_issued then history:=error_message_issued;
print_char("."); show_context;
if interaction=error_stop_mode then @<Get user's advice and |return|@>;
incr(error_count);
if error_count=100 then
  begin print_nl("(That makes 100 errors; please try again.)");
@.That makes 100 errors...@>
  history:=fatal_error_stop; jump_out;
  end;
@<Put help message on the transcript file@>;
exit:end;

@ @<Get user's advice...@>=
loop@+begin continue: clear_for_error_prompt; prompt_input("? ");
@.?\relax@>
  if last=first then return;
  c:=buffer[first];
  if c>="a" then c:=c+"A"-"a"; {convert to uppercase}
  @<Interpret code |c| and |return| if done@>;
  end

@ It is desirable to provide an `\.E' option here that gives the user
an easy way to return from \TeX\ to the system editor, with the offending
line ready to be edited. But such an extension requires some system
wizardry, so the present implementation simply types out the name of the
file that should be
edited and the relevant line number.
@^system dependencies@>

There is a secret `\.D' option available when the debugging routines haven't
been commented~out.
@^debugging@>

@<Interpret code |c| and |return| if done@>=
case c of
"0","1","2","3","4","5","6","7","8","9": if deletions_allowed then
  @<Delete \(c)|c-"0"| tokens and |goto continue|@>;
@t\4\4@>@;@+@!debug "D": begin debug_help; goto continue;@+end;@+gubed@/
"E": if base_ptr>0 then
  begin print_nl("You want to edit file ");
@.You want to edit file x@>
  slow_print(input_stack[base_ptr].name_field);
  print(" at line "); print_int(line);
  interaction:=scroll_mode; jump_out;
  end;
"H": @<Print the help information and |goto continue|@>;
"I":@<Introduce new material from the terminal and |return|@>;
"Q","R","S":@<Change the interaction level and |return|@>;
"X":begin interaction:=scroll_mode; jump_out;
  end;
othercases do_nothing
endcases;@/
@<Print the menu of available options@>

@ @<Print the menu...@>=
begin print("Type <return> to proceed, S to scroll future error messages,");@/
@.Type <return> to proceed...@>
print_nl("R to run without stopping, Q to run quietly,");@/
print_nl("I to insert something, ");
if base_ptr>0 then print("E to edit your file,");
if deletions_allowed then
  print_nl("1 or ... or 9 to ignore the next 1 to 9 tokens of input,");
print_nl("H for help, X to quit.");
end

@ Here the author of \TeX\ apologizes for making use of the numerical
relation between |"Q"|, |"R"|, |"S"|, and the desired interaction settings
|batch_mode|, |nonstop_mode|, |scroll_mode|.
@^Knuth, Donald Ervin@>

@<Change the interaction...@>=
begin error_count:=0; interaction:=batch_mode+c-"Q";
print("OK, entering ");
case c of
"Q":begin print_esc("batchmode"); decr(selector);
  end;
"R":print_esc("nonstopmode");
"S":print_esc("scrollmode");
end; {there are no other cases}
print("..."); print_ln; update_terminal; return;
end

@ When the following code is executed, |buffer[(first+1)..(last-1)]| may
contain the material inserted by the user; otherwise another prompt will
be given. In order to understand this part of the program fully, you need
to be familiar with \TeX's input stacks.

@<Introduce new material...@>=
begin begin_file_reading; {enter a new syntactic level for terminal input}
{now |state=mid_line|, so an initial blank space will count as a blank}
if last>first+1 then
  begin loc:=first+1; buffer[first]:=" ";
  end
else  begin prompt_input("insert>"); loc:=first;
@.insert>@>
  end;
first:=last;
cur_input.limit_field:=last-1; {no |end_line_char| ends this line}
return;
end

@ We allow deletion of up to 99 tokens at a time.

@<Delete \(c)|c-"0"| tokens...@>=
begin s1:=cur_tok; s2:=cur_cmd; s3:=cur_chr; s4:=align_state;
align_state:=1000000; OK_to_interrupt:=false;
if (last>first+1) and (buffer[first+1]>="0")and(buffer[first+1]<="9") then
  c:=c*10+buffer[first+1]-"0"*11
else c:=c-"0";
while c>0 do
  begin get_token; {one-level recursive call of |error| is possible}
  decr(c);
  end;
cur_tok:=s1; cur_cmd:=s2; cur_chr:=s3; align_state:=s4; OK_to_interrupt:=true;
help2("I have just deleted some text, as you asked.")@/
("You can now delete more, or insert, or whatever.");
show_context; goto continue;
end

@ @<Print the help info...@>=
begin if use_err_help then
  begin give_err_help; use_err_help:=false;
  end
else  begin if help_ptr=0 then
    help2("Sorry, I don't know how to help in this situation.")@/
    @t\kern1em@>("Maybe you should try asking a human?");
  repeat decr(help_ptr); print(help_line[help_ptr]); print_ln;
  until help_ptr=0;
  end;
help4("Sorry, I already gave what help I could...")@/
  ("Maybe you should try asking a human?")@/
  ("An error might have occurred before I noticed any problems.")@/
  ("``If all else fails, read the instructions.''");@/
goto continue;
end

@ @<Put help message on the transcript file@>=
if interaction>batch_mode then decr(selector); {avoid terminal output}
if use_err_help then
  begin print_ln; give_err_help;
  end
else while help_ptr>0 do
  begin decr(help_ptr); print_nl(help_line[help_ptr]);
  end;
print_ln;
if interaction>batch_mode then incr(selector); {re-enable terminal output}
print_ln

@ A dozen or so error messages end with a parenthesized integer, so we
save a teeny bit of program space by declaring the following procedure:

@p procedure int_error(@!n:integer);
begin print(" ("); print_int(n); print_char(")"); error;
end;

@ In anomalous cases, the print selector might be in an unknown state;
the following subroutine is called to fix things just enough to keep
running a bit longer.

@p procedure normalize_selector;
begin if log_opened then selector:=term_and_log
else selector:=term_only;
if job_name=0 then open_log_file;
if interaction=batch_mode then decr(selector);
end;

@ The following procedure prints \TeX's last words before dying.

@d succumb==begin if interaction=error_stop_mode then
    interaction:=scroll_mode; {no more interaction}
  if log_opened then error;
  @!debug if interaction>batch_mode then debug_help;@+gubed@;@/
  history:=fatal_error_stop; jump_out; {irrecoverable error}
  end

@<Error hand...@>=
procedure fatal_error(@!s:str_number); {prints |s|, and that's it}
begin normalize_selector;@/
print_err("Emergency stop"); help1(s); succumb;
@.Emergency stop@>
end;

@ Here is the most dreaded error message.

@<Error hand...@>=
procedure overflow(@!s:str_number;@!n:integer); {stop due to finiteness}
begin normalize_selector;
print_err("TeX capacity exceeded, sorry [");
@.TeX capacity exceeded ...@>
print(s); print_char("="); print_int(n); print_char("]");
help2("If you really absolutely need more capacity,")@/
  ("you can ask a wizard to enlarge me.");
succumb;
end;

@ The program might sometime run completely amok, at which point there is
no choice but to stop. If no previous error has been detected, that's bad
news; a message is printed that is really intended for the \TeX\
maintenance person instead of the user (unless the user has been
particularly diabolical).  The index entries for `this can't happen' may
help to pinpoint the problem.
@^dry rot@>

@<Error hand...@>=
procedure confusion(@!s:str_number);
  {consistency check violated; |s| tells where}
begin normalize_selector;
if history<error_message_issued then
  begin print_err("This can't happen ("); print(s); print_char(")");
@.This can't happen@>
  help1("I'm broken. Please show this to someone who can fix can fix");
  end
else  begin print_err("I can't go on meeting you like this");
@.I can't go on...@>
  help2("One of your faux pas seems to have wounded me deeply...")@/
    ("in fact, I'm barely conscious. Please fix it and try again.");
  end;
succumb;
end;

@ Users occasionally want to interrupt \TeX\ while it's running.
If the \PASCAL\ runtime system allows this, one can implement
a routine that sets the global variable |interrupt| to some nonzero value
when such an interrupt is signalled. Otherwise there is probably at least
a way to make |interrupt| nonzero using the \PASCAL\ debugger.
@^system dependencies@>
@^debugging@>

@d check_interrupt==begin if interrupt<>0 then pause_for_instructions;
  end

@<Global...@>=
@!interrupt:integer; {should \TeX\ pause for instructions?}
@!OK_to_interrupt:boolean; {should interrupts be observed?}

@ @<Set init...@>=
interrupt:=0; OK_to_interrupt:=true;

@ When an interrupt has been detected, the program goes into its
highest interaction level and lets the user have nearly the full flexibility of
the |error| routine.  \TeX\ checks for interrupts only at times when it is
safe to do this.

@p procedure pause_for_instructions;
begin if OK_to_interrupt then
  begin interaction:=error_stop_mode;
  if (selector=log_only)or(selector=no_print) then
    incr(selector);
  print_err("Interruption");
@.Interruption@>
  help3("You rang?")@/
  ("Try to insert some instructions for me (e.g.,`I\showlists'),")@/
  ("unless you just want to quit by typing `X'.");
  deletions_allowed:=false; error; deletions_allowed:=true;
  interrupt:=0;
  end;
end;

@* \[7] Arithmetic with scaled dimensions.
The principal computations performed by \TeX\ are done entirely in terms of
integers less than $2^{31}$ in magnitude; and divisions are done only when both
dividend and divisor are nonnegative. Thus, the arithmetic specified in this
program can be carried out in exactly the same way on a wide variety of
computers, including some small ones. Why? Because the arithmetic
calculations need to be spelled out precisely in order to guarantee that
\TeX\ will produce identical output on different machines. If some
quantities were rounded differently in different implementations, we would
find that line breaks and even page breaks might occur in different places.
Hence the arithmetic of \TeX\ has been designed with care, and systems that
claim to be implementations of \TeX82 should follow precisely the
@:TeX82}{\TeX82@>
calculations as they appear in the present program.

(Actually there are three places where \TeX\ uses |div| with a possibly negative
numerator. These are harmless; see |div| in the index. Also if the user
sets the \.{\\time} or the \.{\\year} to a negative value, some diagnostic
information will involve negative-numerator division. The same remarks
apply for |mod| as well as for |div|.)

@ Here is a routine that calculates half of an integer, using an
unambiguous convention with respect to signed odd numbers.

@p function half(@!x:integer):integer;
begin if odd(x) then half:=(x+1) div 2
else half:=x @!div 2;
end;

@ Fixed-point arithmetic is done on {\sl scaled integers\/} that are multiples
of $2^{-16}$. In other words, a binary point is assumed to be sixteen bit
positions from the right end of a binary computer word.

@d unity == @'200000 {$2^{16}$, represents 1.00000}
@d two == @'400000 {$2^{17}$, represents 2.00000}

@<Types...@>=
@!scaled = integer; {this type is used for scaled integers}
@!nonnegative_integer=0..@'17777777777; {$0\L x<2^{31}$}
@!small_number=0..63; {this type is self-explanatory}

@ The following function is used to create a scaled integer from a given decimal
fraction $(.d_0d_1\ldots d_{k-1})$, where |0<=k<=17|. The digit $d_i$ is
given in |dig[i]|, and the calculation produces a correctly rounded result.

@p function round_decimals(@!k:small_number) : scaled;
  {converts a decimal fraction}
var a:integer; {the accumulator}
begin a:=0;
while k>0 do
  begin decr(k); a:=(a+dig[k]*two) div 10;
  end;
round_decimals:=(a+1) div 2;
end;

@ Conversely, here is a procedure analogous to |print_int|. If the output
of this procedure is subsequently read by \TeX\ and converted by the
|round_decimals| routine above, it turns out that the original value will
be reproduced exactly; the ``simplest'' such decimal number is output,
but there is always at least one digit following the decimal point.

The invariant relation in the \&{repeat} loop is that a sequence of
decimal digits yet to be printed will yield the original number if and only if
they form a fraction~$f$ in the range $s-\delta\L10\cdot2^{16}f<s$.
We can stop if and only if $f=0$ satisfies this condition; the loop will
terminate before $s$ can possibly become zero.

@p procedure print_scaled(@!s:scaled); {prints scaled real, rounded to five
  digits}
var delta:scaled; {amount of allowable inaccuracy}
begin if s<0 then
  begin print_char("-"); negate(s); {print the sign, if negative}
  end;
print_int(s div unity); {print the integer part}
print_char(".");
s:=10*(s mod unity)+5; delta:=10;
repeat if delta>unity then s:=s+@'100000-50000; {round the last digit}
print_char("0"+(s div unity)); s:=10*(s mod unity); delta:=delta*10;
until s<=delta;
end;

@ Physical sizes that a \TeX\ user specifies for portions of documents are
represented internally as scaled points. Thus, if we define an `sp' (scaled
@^sp@>
point) as a unit equal to $2^{-16}$ printer's points, every dimension
inside of \TeX\ is an integer number of sp. There are exactly
4,736,286.72 sp per inch.  Users are not allowed to specify dimensions
larger than $2^{30}-1$ sp, which is a distance of about 18.892 feet (5.7583
meters); two such quantities can be added without overflow on a 32-bit
computer.

The present implementation of \TeX\ does not check for overflow when
@^Overflow in arithmetic@>
dimensions are added or subtracted. This could be done by inserting a
few dozen tests of the form `\ignorespaces|if x>=@'10000000000 then
@t\\{report\_overflow}@>|', but the chance of overflow is so remote that
such tests do not seem worthwhile.

\TeX\ needs to do only a few arithmetic operations on scaled quantities,
other than addition and subtraction, and the following subroutines do most of
the work. A single computation might use several subroutine calls, and it is
desirable to avoid producing multiple error messages in case of arithmetic
overflow; so the routines set the global variable |arith_error| to |true|
instead of reporting errors directly to the user. Another global variable,
|remainder|, holds the remainder after a division.

@<Glob...@>=
@!arith_error:boolean; {has arithmetic overflow occurred recently?}
@!remainder:scaled; {amount subtracted to get an exact division}

@ The first arithmetical subroutine we need computes $nx+y$, where |x|
and~|y| are |scaled| and |n| is an integer. We will also use it to
multiply integers.

@d nx_plus_y(#)==mult_and_add(#,@'7777777777)
@d mult_integers(#)==mult_and_add(#,0,@'17777777777)

@p function mult_and_add(@!n:integer;@!x,@!y,@!max_answer:scaled):scaled;
begin if n<0 then
  begin negate(x); negate(n);
  end;
if n=0 then mult_and_add:=y
else if ((x<=(max_answer-y) div n)and(-x<=(max_answer+y) div n)) then
  mult_and_add:=n*x+y
else  begin arith_error:=true; mult_and_add:=0;
  end;
end;

@ We also need to divide scaled dimensions by integers.

@p function x_over_n(@!x:scaled;@!n:integer):scaled;
var negative:boolean; {should |remainder| be negated?}
begin negative:=false;
if n=0 then
  begin arith_error:=true; x_over_n:=0; remainder:=x;
  end
else  begin if n<0 then
    begin negate(x); negate(n); negative:=true;
    end;
  if x>=0 then
    begin x_over_n:=x div n; remainder:=x mod n;
    end
  else  begin x_over_n:=-((-x) div n); remainder:=-((-x) mod n);
    end;
  end;
if negative then negate(remainder);
end;

@ Then comes the multiplication of a scaled number by a fraction |n/d|,
where |n| and |d| are nonnegative integers |<=@t$2^{16}$@>| and |d| is
positive. It would be too dangerous to multiply by~|n| and then divide
by~|d|, in separate operations, since overflow might well occur; and it
would be too inaccurate to divide by |d| and then multiply by |n|. Hence
this subroutine simulates 1.5-precision arithmetic.

@p function xn_over_d(@!x:scaled; @!n,@!d:integer):scaled;
var positive:boolean; {was |x>=0|?}
@!t,@!u,@!v:nonnegative_integer; {intermediate quantities}
begin if x>=0 then positive:=true
else  begin negate(x); positive:=false;
  end;
t:=(x mod @'100000)*n;
u:=(x div @'100000)*n+(t div @'100000);
v:=(u mod d)*@'100000 + (t mod @'100000);
if u div d>=@'100000 then arith_error:=true
else u:=@'100000*(u div d) + (v div d);
if positive then
  begin xn_over_d:=u; remainder:=v mod d;
  end
else  begin xn_over_d:=-u; remainder:=-(v mod d);
  end;
end;

@ The next subroutine is used to compute the ``badness'' of glue, when a
total~|t| is supposed to be made from amounts that sum to~|s|.  According
to {\sl The \TeX book}, the badness of this situation is $100(t/s)^3$;
however, badness is simply a heuristic, so we need not squeeze out the
last drop of accuracy when computing it. All we really want is an
approximation that has similar properties.
@:TeXbook}{\sl The \TeX book@>

The actual method used to compute the badness is easier to read from the
program than to describe in words. It produces an integer value that is a
reasonably close approximation to $100(t/s)^3$, and all implementations
of \TeX\ should use precisely this method. Any badness of $2^{13}$ or more is
treated as infinitely bad, and represented by 10000.

It is not difficult to prove that $$\hbox{|badness(t+1,s)>=badness(t,s)
>=badness(t,s+1)|}.$$ The badness function defined here is capable of
computing at most 1095 distinct values, but that is plenty.

@d inf_bad = 10000 {infinitely bad value}

@p function badness(@!t,@!s:scaled):halfword; {compute badness, given |t>=0|}
var r:integer; {approximation to $\alpha t/s$, where $\alpha^3\approx
  100\cdot2^{18}$}
begin if t=0 then badness:=0
else if s<=0 then badness:=inf_bad
else  begin if t<=7230584 then  r:=(t*297) div s {$297^3=99.94\times2^{18}$}
  else if s>=1663497 then r:=t div (s div 297)
  else r:=t;
  if r>1290 then badness:=inf_bad {$1290^3<2^{31}<1291^3$}
  else badness:=(r*r*r+@'400000) div @'1000000;
  end; {that was $r^3/2^{18}$, rounded to the nearest integer}
end;

@ When \TeX\ ``packages'' a list into a box, it needs to calculate the
proportionality ratio by which the glue inside the box should stretch
or shrink. This calculation does not affect \TeX's decision making,
so the precise details of rounding, etc., in the glue calculation are not
of critical importance for the consistency of results on different computers.

We shall use the type |glue_ratio| for such proportionality ratios.
A glue ratio should take the same amount of memory as an
|integer| (usually 32 bits) if it is to blend smoothly with \TeX's
other data structures. Thus |glue_ratio| should be equivalent to
|short_real| in some implementations of \PASCAL. Alternatively,
it is possible to deal with glue ratios using nothing but fixed-point
arithmetic; see {\sl TUGboat \bf3},1 (March 1982), 10--27. (But the
routines cited there must be modified to allow negative glue ratios.)
@^system dependencies@>

@d set_glue_ratio_zero(#) == #:=0.0 {store the representation of zero ratio}
@d set_glue_ratio_one(#) == #:=1.0 {store the representation of unit ratio}
@d float(#) == # {convert from |glue_ratio| to type |real|}
@d unfloat(#) == # {convert from |real| to type |glue_ratio|}
@d float_constant(#) == #.0 {convert |integer| constant to |real|}

@<Types...@>=
@!glue_ratio=real; {one-word representation of a glue expansion factor}

@* \[8] Packed data.
In order to make efficient use of storage space, \TeX\ bases its major data
structures on a |memory_word|, which contains either a (signed) integer,
possibly scaled, or a (signed) |glue_ratio|, or a small number of
fields that are one half or one quarter of the size used for storing
integers.

If |x| is a variable of type |memory_word|, it contains up to four
fields that can be referred to as follows:
$$\vbox{\halign{\hfil#&#\hfil&#\hfil\cr
|x|&.|int|&(an |integer|)\cr
|x|&.|sc|\qquad&(a |scaled| integer)\cr
|x|&.|gr|&(a |glue_ratio|)\cr
|x.hh.lh|, |x.hh|&.|rh|&(two halfword fields)\cr
|x.hh.b0|, |x.hh.b1|, |x.hh|&.|rh|&(two quarterword fields, one halfword
  field)\cr
|x.qqqq.b0|, |x.qqqq.b1|, |x.qqqq|&.|b2|, |x.qqqq.b3|\hskip-100pt
  &\qquad\qquad\qquad(four quarterword fields)\cr}}$$
This is somewhat cumbersome to write, and not very readable either, but
macros will be used to make the notation shorter and more transparent.
The \PASCAL\ code below gives a formal definition of |memory_word| and
its subsidiary types, using packed variant records. \TeX\ makes no
assumptions about the relative positions of the fields within a word.

Since we are assuming 32-bit integers, a halfword must contain at least
16 bits, and a quarterword must contain at least 8 bits.
@^system dependencies@>
But it doesn't hurt to have more bits; for example, with enough 36-bit
words you might be able to have |mem_max| as large as 262142, which is
eight times as much memory as anybody had during the first four years of
\TeX's existence.

N.B.: Valuable memory space will be dreadfully wasted unless \TeX\ is compiled
by a \PASCAL\ that packs all of the |memory_word| variants into
the space of a single integer. This means, for example, that |glue_ratio|
words should be |short_real| instead of |real| on some computers. Some
\PASCAL\ compilers will pack an integer whose subrange is `|0..255|' into
an eight-bit field, but others insist on allocating space for an additional
sign bit; on such systems you can get 256 values into a quarterword only
if the subrange is `|-128..127|'.

The present implementation tries to accommodate as many variations as possible,
so it makes few assumptions. If integers having the subrange
`|min_quarterword..max_quarterword|' can be packed into a quarterword,
and if integers having the subrange `|min_halfword..max_halfword|'
can be packed into a halfword, everything should work satisfactorily.

It is usually most efficient to have |min_quarterword=min_halfword=0|,
so one should try to achieve this unless it causes a severe problem.
The values defined here are recommended for most 32-bit computers.

@d min_quarterword=0 {smallest allowable value in a |quarterword|}
@d max_quarterword=255 {largest allowable value in a |quarterword|}
@d min_halfword==0 {smallest allowable value in a |halfword|}
@d max_halfword==65535 {largest allowable value in a |halfword|}

@ Here are the inequalities that the quarterword and halfword values
must satisfy (or rather, the inequalities that they mustn't satisfy):

@<Check the ``constant''...@>=
init if (mem_min<>mem_bot)or(mem_max<>mem_top) then bad:=10;@+tini@;@/
if (mem_min>mem_bot)or(mem_max<mem_top) then bad:=10;
if (min_quarterword>0)or(max_quarterword<127) then bad:=11;
if (min_halfword>0)or(max_halfword<32767) then bad:=12;
if (min_quarterword<min_halfword)or@|
  (max_quarterword>max_halfword) then bad:=13;
if (mem_min<min_halfword)or(mem_max>=max_halfword)or@|
  (mem_bot-mem_min>max_halfword+1) then bad:=14;
if (font_base<min_quarterword)or(font_max>max_quarterword) then bad:=15;
if font_max>font_base+256 then bad:=16;
if (save_size>max_halfword)or(max_strings>max_halfword) then bad:=17;
if buf_size>max_halfword then bad:=18;
if max_quarterword-min_quarterword<255 then bad:=19;

@ The operation of adding or subtracting |min_quarterword| occurs quite
frequently in \TeX, so it is convenient to abbreviate this operation
by using the macros |qi| and |qo| for input and output to and from
quarterword format.

The inner loop of \TeX\ will run faster with respect to compilers
that don't optimize expressions like `|x+0|' and `|x-0|', if these
macros are simplified in the obvious way when |min_quarterword=0|.
@^inner loop@>@^system dependencies@>

@d qi(#)==#+min_quarterword
  {to put an |eight_bits| item into a quarterword}
@d qo(#)==#-min_quarterword
  {to take an |eight_bits| item out of a quarterword}
@d hi(#)==#+min_halfword
  {to put a sixteen-bit item into a halfword}
@d ho(#)==#-min_halfword
  {to take a sixteen-bit item from a halfword}

@ The reader should study the following definitions closely:
@^system dependencies@>

@d sc==int {|scaled| data is equivalent to |integer|}

@<Types...@>=
@!quarterword = min_quarterword..max_quarterword; {1/4 of a word}
@!halfword=min_halfword..max_halfword; {1/2 of a word}
@!two_choices = 1..2; {used when there are two variants in a record}
@!four_choices = 1..4; {used when there are four variants in a record}
@!two_halves = packed record@;@/
  @!rh:halfword;
  case two_choices of
  1: (@!lh:halfword);
  2: (@!b0:quarterword; @!b1:quarterword);
  end;
@!four_quarters = packed record@;@/
  @!b0:quarterword;
  @!b1:quarterword;
  @!b2:quarterword;
  @!b3:quarterword;
  end;
@!memory_word = record@;@/
  case four_choices of
  1: (@!int:integer);
  2: (@!gr:glue_ratio);
  3: (@!hh:two_halves);
  4: (@!qqqq:four_quarters);
  end;
@!word_file = file of memory_word;

@ When debugging, we may want to print a |memory_word| without knowing
what type it is; so we print it in all modes.
@^dirty \PASCAL@>@^debugging@>

@p @!debug procedure print_word(@!w:memory_word);
  {prints |w| in all ways}
begin print_int(w.int); print_char(" ");@/
print_scaled(w.sc); print_char(" ");@/
print_scaled(round(unity*float(w.gr))); print_ln;@/
@^real multiplication@>
print_int(w.hh.lh); print_char("="); print_int(w.hh.b0); print_char(":");
print_int(w.hh.b1); print_char(";"); print_int(w.hh.rh); print_char(" ");@/
print_int(w.qqqq.b0); print_char(":"); print_int(w.qqqq.b1); print_char(":");
print_int(w.qqqq.b2); print_char(":"); print_int(w.qqqq.b3);
end;
gubed

@* \[9] Dynamic memory allocation.
The \TeX\ system does nearly all of its own memory allocation, so that it
can readily be transported into environments that do not have automatic
facilities for strings, garbage collection, etc., and so that it can be in
control of what error messages the user receives. The dynamic storage
requirements of \TeX\ are handled by providing a large array |mem| in
which consecutive blocks of words are used as nodes by the \TeX\ routines.

Pointer variables are indices into this array, or into another array
called |eqtb| that will be explained later. A pointer variable might
also be a special flag that lies outside the bounds of |mem|, so we
allow pointers to assume any |halfword| value. The minimum halfword
value represents a null pointer. \TeX\ does not assume that |mem[null]| exists.

@d pointer==halfword {a flag or a location in |mem| or |eqtb|}
@d null==min_halfword {the null pointer}

@<Glob...@>=
@!temp_ptr:pointer; {a pointer variable for occasional emergency use}

@ The |mem| array is divided into two regions that are allocated separately,
but the dividing line between these two regions is not fixed; they grow
together until finding their ``natural'' size in a particular job.
Locations less than or equal to |lo_mem_max| are used for storing
variable-length records consisting of two or more words each. This region
is maintained using an algorithm similar to the one described in exercise
2.5--19 of {\sl The Art of Computer Programming}. However, no size field
appears in the allocated nodes; the program is responsible for knowing the
relevant size when a node is freed. Locations greater than or equal to
|hi_mem_min| are used for storing one-word records; a conventional
\.{AVAIL} stack is used for allocation in this region.

Locations of |mem| between |mem_bot| and |mem_top| may be dumped as part
of preloaded format files, by the \.{INITEX} preprocessor.
@.INITEX@>
Production versions of \TeX\ may extend the memory at both ends in order to
provide more space; locations between |mem_min| and |mem_bot| are always
used for variable-size nodes, and locations between |mem_top| and |mem_max|
are always used for single-word nodes.

The key pointers that govern |mem| allocation have a prescribed order:
$$\advance\thickmuskip-2mu
\hbox{|null<=mem_min<=mem_bot<lo_mem_max<
  hi_mem_min<mem_top<=mem_end<=mem_max|.}$$

Empirical tests show that the present implementation of \TeX\ tends to
spend about 9\pct! of its running time allocating nodes, and about 6\pct!
deallocating them after their use.

@<Glob...@>=
@!mem : array[mem_min..mem_max] of memory_word; {the big dynamic storage area}
@!lo_mem_max : pointer; {the largest location of variable-size memory in use}
@!hi_mem_min : pointer; {the smallest location of one-word memory in use}

@ In order to study the memory requirements of particular applications, it
is possible to prepare a version of \TeX\ that keeps track of current and
maximum memory usage. When code between the delimiters |@!stat| $\ldots$
|tats| is not ``commented out,'' \TeX\ will run a bit slower but it will
report these statistics when |tracing_stats| is sufficiently large.

@<Glob...@>=
@!var_used, @!dyn_used : integer; {how much memory is in use}

@ Let's consider the one-word memory region first, since it's the
simplest. The pointer variable |mem_end| holds the highest-numbered location
of |mem| that has ever been used. The free locations of |mem| that
occur between |hi_mem_min| and |mem_end|, inclusive, are of type
|two_halves|, and we write |info(p)| and |link(p)| for the |lh|
and |rh| fields of |mem[p]| when it is of this type. The single-word
free locations form a linked list
$$|avail|,\;\hbox{|link(avail)|},\;\hbox{|link(link(avail))|},\;\ldots$$
terminated by |null|.

@d link(#) == mem[#].hh.rh {the |link| field of a memory word}
@d info(#) == mem[#].hh.lh {the |info| field of a memory word}

@<Glob...@>=
@!avail : pointer; {head of the list of available one-word nodes}
@!mem_end : pointer; {the last one-word node used in |mem|}

@ If memory is exhausted, it might mean that the user has forgotten
a right brace. We will define some procedures later that try to help
pinpoint the trouble.

@p @<Declare the procedure called |show_token_list|@>@/
@<Declare the procedure called |runaway|@>

@ The function |get_avail| returns a pointer to a new one-word node whose
|link| field is null. However, \TeX\ will halt if there is no more room left.
@^inner loop@>

If the available-space list is empty, i.e., if |avail=null|,
we try first to increase |mem_end|. If that cannot be done, i.e., if
|mem_end=mem_max|, we try to decrease |hi_mem_min|. If that cannot be
done, i.e., if |hi_mem_min=lo_mem_max+1|, we have to quit.

@p function get_avail : pointer; {single-word node allocation}
var p:pointer; {the new node being got}
begin p:=avail; {get top location in the |avail| stack}
if p<>null then avail:=link(avail) {and pop it off}
else if mem_end<mem_max then {or go into virgin territory}
  begin incr(mem_end); p:=mem_end;
  end
else   begin decr(hi_mem_min); p:=hi_mem_min;
  if hi_mem_min<=lo_mem_max then
    begin runaway; {if memory is exhausted, display possible runaway text}
    overflow("main memory size",mem_max+1-mem_min);
      {quit; all one-word nodes are busy}
@:TeX capacity exceeded main memory size}{\quad main memory size@>
    end;
  end;
link(p):=null; {provide an oft-desired initialization of the new node}
@!stat incr(dyn_used);@+tats@;{maintain statistics}
get_avail:=p;
end;

@ Conversely, a one-word node is recycled by calling |free_avail|.
This routine is part of \TeX's ``inner loop,'' so we want it to be fast.
@^inner loop@>

@d free_avail(#)== {single-word node liberation}
  begin link(#):=avail; avail:=#;
  @!stat decr(dyn_used);@+tats@/
  end

@ There's also a |fast_get_avail| routine, which saves the procedure-call
overhead at the expense of extra programming. This routine is used in
the places that would otherwise account for the most calls of |get_avail|.
@^inner loop@>

@d fast_get_avail(#)==@t@>@;@/
  begin #:=avail; {avoid |get_avail| if possible, to save time}
  if #=null then #:=get_avail
  else  begin avail:=link(#); link(#):=null;
    @!stat incr(dyn_used);@+tats@/
    end;
  end

@ The procedure |flush_list(p)| frees an entire linked list of
one-word nodes that starts at position |p|.
@^inner loop@>

@p procedure flush_list(@!p:pointer); {makes list of single-word nodes
  available}
var @!q,@!r:pointer; {list traversers}
begin if p<>null then
  begin r:=p;
  repeat q:=r; r:=link(r); @!stat decr(dyn_used);@+tats@/
  until r=null; {now |q| is the last node on the list}
  link(q):=avail; avail:=p;
  end;
end;

@ The available-space list that keeps track of the variable-size portion
of |mem| is a nonempty, doubly-linked circular list of empty nodes,
pointed to by the roving pointer |rover|.

Each empty node has size 2 or more; the first word contains the special
value |max_halfword| in its |link| field and the size in its |info| field;
the second word contains the two pointers for double linking.

Each nonempty node also has size 2 or more. Its first word is of type
|two_halves|\kern-1pt, and its |link| field is never equal to |max_halfword|.
Otherwise there is complete flexibility with respect to the contents
of its other fields and its other words.

(We require |mem_max<max_halfword| because terrible things can happen
when |max_halfword| appears in the |link| field of a nonempty node.)

@d empty_flag == max_halfword {the |link| of an empty variable-size node}
@d is_empty(#) == (link(#)=empty_flag) {tests for empty node}
@d node_size == info {the size field in empty variable-size nodes}
@d llink(#) == info(#+1) {left link in doubly-linked list of empty nodes}
@d rlink(#) == link(#+1) {right link in doubly-linked list of empty nodes}

@<Glob...@>=
@!rover : pointer; {points to some node in the list of empties}

@ A call to |get_node| with argument |s| returns a pointer to a new node
of size~|s|, which must be 2~or more. The |link| field of the first word
of this new node is set to null. An overflow stop occurs if no suitable
space exists.

If |get_node| is called with $s=2^{30}$, it simply merges adjacent free
areas and returns the value |max_halfword|.

@p function get_node(@!s:integer):pointer; {variable-size node allocation}
label found,exit,restart;
var p:pointer; {the node currently under inspection}
@!q:pointer; {the node physically after node |p|}
@!r:integer; {the newly allocated node, or a candidate for this honor}
@!t:integer; {temporary register}
begin restart: p:=rover; {start at some free node in the ring}
repeat @<Try to allocate within node |p| and its physical successors,
  and |goto found| if allocation was possible@>;
@^inner loop@>
p:=rlink(p); {move to the next node in the ring}
until p=rover; {repeat until the whole list has been traversed}
if s=@'10000000000 then
  begin get_node:=max_halfword; return;
  end;
if lo_mem_max+2<hi_mem_min then if lo_mem_max+2<=mem_bot+max_halfword then
  @<Grow more variable-size memory and |goto restart|@>;
overflow("main memory size",mem_max+1-mem_min);
  {sorry, nothing satisfactory is left}
@:TeX capacity exceeded main memory size}{\quad main memory size@>
found: link(r):=null; {this node is now nonempty}
@!stat var_used:=var_used+s; {maintain usage statistics}
tats@;@/
get_node:=r;
exit:end;

@ The lower part of |mem| grows by 1000 words at a time, unless
we are very close to going under. When it grows, we simply link
a new node into the available-space list. This method of controlled
growth helps to keep the |mem| usage consecutive when \TeX\ is
implemented on ``virtual memory'' systems.
@^virtual memory@>

@<Grow more variable-size memory and |goto restart|@>=
begin if hi_mem_min-lo_mem_max>=1998 then t:=lo_mem_max+1000
else t:=lo_mem_max+1+(hi_mem_min-lo_mem_max) div 2;
  {|lo_mem_max+2<=t<hi_mem_min|}
p:=llink(rover); q:=lo_mem_max; rlink(p):=q; llink(rover):=q;@/
if t>mem_bot+max_halfword then t:=mem_bot+max_halfword;
rlink(q):=rover; llink(q):=p; link(q):=empty_flag; node_size(q):=t-lo_mem_max;@/
lo_mem_max:=t; link(lo_mem_max):=null; info(lo_mem_max):=null;
rover:=q; goto restart;
end

@ Empirical tests show that the routine in this section performs a
node-merging operation about 0.75 times per allocation, on the average,
after which it finds that |r>p+1| about 95\pct! of the time.

@<Try to allocate...@>=
q:=p+node_size(p); {find the physical successor}
@^inner loop@>
while is_empty(q) do {merge node |p| with node |q|}
  begin t:=rlink(q);
  if q=rover then rover:=t;
  llink(t):=llink(q); rlink(llink(q)):=t;@/
  q:=q+node_size(q);
  end;
r:=q-s;
if r>p+1 then @<Allocate from the top of node |p| and |goto found|@>;
if r=p then if rlink(p)<>p then
  @<Allocate entire node |p| and |goto found|@>;
node_size(p):=q-p {reset the size in case it grew}

@ @<Allocate from the top...@>=
begin node_size(p):=r-p; {store the remaining size}
@^inner loop@>
rover:=p; {start searching here next time}
goto found;
end

@ Here we delete node |p| from the ring, and let |rover| rove around.

@<Allocate entire...@>=
begin rover:=rlink(p); t:=llink(p);
llink(rover):=t; rlink(t):=rover;
goto found;
end

@ Conversely, when some variable-size node |p| of size |s| is no longer needed,
the operation |free_node(p,s)| will make its words available, by inserting
|p| as a new empty node just before where |rover| now points.
@^inner loop@>

@p procedure free_node(@!p:pointer; @!s:halfword); {variable-size node
  liberation}
var q:pointer; {|llink(rover)|}
begin node_size(p):=s; link(p):=empty_flag;
q:=llink(rover); llink(p):=q; rlink(p):=rover; {set both links}
llink(rover):=p; rlink(q):=p; {insert |p| into the ring}
@!stat var_used:=var_used-s;@+tats@;{maintain statistics}
end;

@ Just before \.{INITEX} writes out the memory, it sorts the doubly linked
available space list. The list is probably very short at such times, so a
simple insertion sort is used. The smallest available location will be
pointed to by |rover|, the next-smallest by |rlink(rover)|, etc.

@p @!init procedure sort_avail; {sorts the available variable-size nodes
  by location}
var p,@!q,@!r: pointer; {indices into |mem|}
@!old_rover:pointer; {initial |rover| setting}
begin p:=get_node(@'10000000000); {merge adjacent free areas}
p:=rlink(rover); rlink(rover):=max_halfword; old_rover:=rover;
while p<>old_rover do @<Sort \(p)|p| into the list starting at |rover|
  and advance |p| to |rlink(p)|@>;
p:=rover;
while rlink(p)<>max_halfword do
  begin llink(rlink(p)):=p; p:=rlink(p);
  end;
rlink(p):=rover; llink(rover):=p;
end;
tini

@ The following |while| loop is guaranteed to
terminate, since the list that starts at
|rover| ends with |max_halfword| during the sorting procedure.

@<Sort \(p)|p|...@>=
if p<rover then
  begin q:=p; p:=rlink(q); rlink(q):=rover; rover:=q;
  end
else  begin q:=rover;
  while rlink(q)<p do q:=rlink(q);
  r:=rlink(p); rlink(p):=rlink(q); rlink(q):=p; p:=r;
  end

@* \[10] Data structures for boxes and their friends.
From the computer's standpoint, \TeX's chief mission is to create
horizontal and vertical lists. We shall now investigate how the elements
of these lists are represented internally as nodes in the dynamic memory.

A horizontal or vertical list is linked together by |link| fields in
the first word of each node. Individual nodes represent boxes, glue,
penalties, or special things like discretionary hyphens; because of this
variety, some nodes are longer than others, and we must distinguish different
kinds of nodes. We do this by putting a `|type|' field in the first word,
together with the link and an optional `|subtype|'.

@d type(#) == mem[#].hh.b0 {identifies what kind of node this is}
@d subtype(#) == mem[#].hh.b1 {secondary identification in some cases}

@ A |@!char_node|, which represents a single character, is the most important
kind of node because it accounts for the vast majority of all boxes.
Special precautions are therefore taken to ensure that a |char_node| does
not take up much memory space. Every such node is one word long, and in fact
it is identifiable by this property, since other kinds of nodes have at least
two words, and they appear in |mem| locations less than |hi_mem_min|.
This makes it possible to omit the |type| field in a |char_node|, leaving
us room for two bytes that identify a |font| and a |character| within
that font.

Note that the format of a |char_node| allows for up to 256 different
fonts and up to 256 characters per font; but most implementations will
probably limit the total number of fonts to fewer than 75 per job,
and most fonts will stick to characters whose codes are
less than 128 (since higher codes
are more difficult to access on most keyboards).

Extensions of \TeX\ intended for oriental languages will need even more
than $256\times256$ possible characters, when we consider different sizes
@^oriental characters@>@^Chinese characters@>@^Japanese characters@>
and styles of type.  It is suggested that Chinese and Japanese fonts be
handled by representing such characters in two consecutive |char_node|
entries: The first of these has |font=font_base|, and its |link| points
to the second;
the second identifies the font and the character dimensions.
The saving feature about oriental characters is that most of them have
the same box dimensions. The |character| field of the first |char_node|
is a ``\\{charext}'' that distinguishes between graphic symbols whose
dimensions are identical for typesetting purposes. (See the \MF\ manual.)
Such an extension of \TeX\ would not be difficult; further details are
left to the reader.

In order to make sure that the |character| code fits in a quarterword,
\TeX\ adds the quantity |min_quarterword| to the actual code.

Character nodes appear only in horizontal lists, never in vertical lists.

@d is_char_node(#) == (#>=hi_mem_min)
  {does the argument point to a |char_node|?}
@d font == type {the font code in a |char_node|}
@d character == subtype {the character code in a |char_node|}

@ An |hlist_node| stands for a box that was made from a horizontal list.
Each |hlist_node| is seven words long, and contains the following fields
(in addition to the mandatory |type| and |link|, which we shall not
mention explicitly when discussing the other node types): The |height| and
|width| and |depth| are scaled integers denoting the dimensions of the
box.  There is also a |shift_amount| field, a scaled integer indicating
how much this box should be lowered (if it appears in a horizontal list),
or how much it should be moved to the right (if it appears in a vertical
list). There is a |list_ptr| field, which points to the beginning of the
list from which this box was fabricated; if |list_ptr| is |null|, the box
is empty. Finally, there are three fields that represent the setting of
the glue:  |glue_set(p)| is a word of type |glue_ratio| that represents
the proportionality constant for glue setting; |glue_sign(p)| is
|stretching| or |shrinking| or |normal| depending on whether or not the
glue should stretch or shrink or remain rigid; and |glue_order(p)|
specifies the order of infinity to which glue setting applies (|normal|,
|fil|, |fill|, or |filll|). The |subtype| field is not used.

@d hlist_node=0 {|type| of hlist nodes}
@d box_node_size=7 {number of words to allocate for a box node}
@d width_offset=1 {position of |width| field in a box node}
@d depth_offset=2 {position of |depth| field in a box node}
@d height_offset=3 {position of |height| field in a box node}
@d width(#) == mem[#+width_offset].sc {width of the box, in sp}
@d depth(#) == mem[#+depth_offset].sc {depth of the box, in sp}
@d height(#) == mem[#+height_offset].sc {height of the box, in sp}
@d shift_amount(#) == mem[#+4].sc {repositioning distance, in sp}
@d list_offset=5 {position of |list_ptr| field in a box node}
@d list_ptr(#) == link(#+list_offset) {beginning of the list inside the box}
@d glue_order(#) == subtype(#+list_offset) {applicable order of infinity}
@d glue_sign(#) == type(#+list_offset) {stretching or shrinking}
@d normal=0 {the most common case when several cases are named}
@d stretching = 1 {glue setting applies to the stretch components}
@d shrinking = 2 {glue setting applies to the shrink components}
@d glue_offset = 6 {position of |glue_set| in a box node}
@d glue_set(#) == mem[#+glue_offset].gr
  {a word of type |glue_ratio| for glue setting}

@ The |new_null_box| function returns a pointer to an |hlist_node| in
which all subfields have the values corresponding to `\.{\\hbox\{\}}'.
The |subtype| field is set to |min_quarterword|, since that's the desired
|span_count| value if this |hlist_node| is changed to an |unset_node|.

@p function new_null_box:pointer; {creates a new box node}
var p:pointer; {the new node}
begin p:=get_node(box_node_size); type(p):=hlist_node;
subtype(p):=min_quarterword;
width(p):=0; depth(p):=0; height(p):=0; shift_amount(p):=0; list_ptr(p):=null;
glue_sign(p):=normal; glue_order(p):=normal; set_glue_ratio_zero(glue_set(p));
new_null_box:=p;
end;

@ A |vlist_node| is like an |hlist_node| in all respects except that it
contains a vertical list.

@d vlist_node=1 {|type| of vlist nodes}

@ A |rule_node| stands for a solid black rectangle; it has |width|,
|depth|, and |height| fields just as in an |hlist_node|. However, if
any of these dimensions is $-2^{30}$, the actual value will be determined
by running the rule up to the boundary of the innermost enclosing box.
This is called a ``running dimension.'' The |width| is never running in
an hlist; the |height| and |depth| are never running in a~vlist.

@d rule_node=2 {|type| of rule nodes}
@d rule_node_size=4 {number of words to allocate for a rule node}
@d null_flag==-@'10000000000 {$-2^{30}$, signifies a missing item}
@d is_running(#) == (#=null_flag) {tests for a running dimension}

@ A new rule node is delivered by the |new_rule| function. It
makes all the dimensions ``running,'' so you have to change the
ones that are not allowed to run.

@p function new_rule:pointer;
var p:pointer; {the new node}
begin p:=get_node(rule_node_size); type(p):=rule_node;
subtype(p):=0; {the |subtype| is not used}
width(p):=null_flag; depth(p):=null_flag; height(p):=null_flag;
new_rule:=p;
end;

@ Insertions are represented by |ins_node| records, where the |subtype|
indicates the corresponding box number. For example, `\.{\\insert 250}'
leads to an |ins_node| whose |subtype| is |250+min_quarterword|.
The |height| field of an |ins_node| is slightly misnamed; it actually holds
the natural height plus depth of the vertical list being inserted.
The |depth| field holds the |split_max_depth| to be used in case this
insertion is split, and the |split_top_ptr| points to the corresponding
|split_top_skip|. The |float_cost| field holds the |floating_penalty| that
will be used if this insertion floats to a subsequent page after a
split insertion of the same class.  There is one more field, the
|ins_ptr|, which points to the beginning of the vlist for the insertion.

@d ins_node=3 {|type| of insertion nodes}
@d ins_node_size=5 {number of words to allocate for an insertion}
@d float_cost(#)==mem[#+1].int {the |floating_penalty| to be used}
@d ins_ptr(#)==info(#+4) {the vertical list to be inserted}
@d split_top_ptr(#)==link(#+4) {the |split_top_skip| to be used}

@ A |mark_node| has a |mark_ptr| field that points to the reference count
of a token list that contains the user's \.{\\mark} text.
This field occupies a full word instead of a halfword, because
there's nothing to put in the other halfword; it is easier in \PASCAL\ to
use the full word than to risk leaving garbage in the unused half.

@d mark_node=4 {|type| of a mark node}
@d small_node_size=2 {number of words to allocate for most node types}
@d mark_ptr(#)==mem[#+1].int {head of the token list for a mark}

@ An |adjust_node|, which occurs only in horizontal lists,
specifies material that will be moved out into the surrounding
vertical list; i.e., it is used to implement \TeX's `\.{\\vadjust}'
operation.  The |adjust_ptr| field points to the vlist containing this
material.

@d adjust_node=5 {|type| of an adjust node}
@d adjust_ptr==mark_ptr {vertical list to be moved out of horizontal list}

@ A |ligature_node|, which occurs only in horizontal lists, specifies
a character that was fabricated from the interaction of two or more
actual characters.  The second word of the node, which is called the
|lig_char| word, contains |font| and |character| fields just as in a
|char_node|. The characters that generated the ligature have not been
forgotten, since they are needed for diagnostic messages and for
hyphenation; the |lig_ptr| field points to a linked list of character
nodes for all original characters that have been deleted. (This list
might be empty if the characters that generated the ligature were
retained in other nodes.)

The |subtype| field is 0, plus 2 and/or 1 if the original source of the
ligature included implicit left and/or right boundaries.

@d ligature_node=6 {|type| of a ligature node}
@d lig_char(#)==#+1 {the word where the ligature is to be found}
@d lig_ptr(#)==link(lig_char(#)) {the list of characters}

@ The |new_ligature| function creates a ligature node having given
contents of the |font|, |character|, and |lig_ptr| fields. We also have
a |new_lig_item| function, which returns a two-word node having a given
|character| field. Such nodes are used for temporary processing as ligatures
are being created.

@p function new_ligature(@!f,@!c:quarterword; @!q:pointer):pointer;
var p:pointer; {the new node}
begin p:=get_node(small_node_size); type(p):=ligature_node;
font(lig_char(p)):=f; character(lig_char(p)):=c; lig_ptr(p):=q;
subtype(p):=0; new_ligature:=p;
end;
@#
function new_lig_item(@!c:quarterword):pointer;
var p:pointer; {the new node}
begin p:=get_node(small_node_size); character(p):=c; lig_ptr(p):=null;
new_lig_item:=p;
end;

@ A |disc_node|, which occurs only in horizontal lists, specifies a
``dis\-cretion\-ary'' line break. If such a break occurs at node |p|, the text
that starts at |pre_break(p)| will precede the break, the text that starts at
|post_break(p)| will follow the break, and text that appears in the next
|replace_count(p)| nodes will be ignored. For example, an ordinary
discretionary hyphen, indicated by `\.{\\-}', yields a |disc_node| with
|pre_break| pointing to a |char_node| containing a hyphen, |post_break=null|,
and |replace_count=0|. All three of the discretionary texts must be
lists that consist entirely of character, kern, box, rule, and ligature nodes.

If |pre_break(p)=null|, the |ex_hyphen_penalty| will be charged for this
break.  Otherwise the |hyphen_penalty| will be charged.  The texts will
actually be substituted into the list by the line-breaking algorithm if it
decides to make the break, and the discretionary node will disappear at
that time; thus, the output routine sees only discretionaries that were
not chosen.

@d disc_node=7 {|type| of a discretionary node}
@d replace_count==subtype {how many subsequent nodes to replace}
@d pre_break==llink {text that precedes a discretionary break}
@d post_break==rlink {text that follows a discretionary break}

@p function new_disc:pointer; {creates an empty |disc_node|}
var p:pointer; {the new node}
begin p:=get_node(small_node_size); type(p):=disc_node;
replace_count(p):=0; pre_break(p):=null; post_break(p):=null;
new_disc:=p;
end;

@ A |whatsit_node| is a wild card reserved for extensions to \TeX. The
|subtype| field in its first word says what `\\{whatsit}' it is, and
implicitly determines the node size (which must be 2 or more) and the
format of the remaining words. When a |whatsit_node| is encountered
in a list, special actions are invoked; knowledgeable people who are
careful not to mess up the rest of \TeX\ are able to make \TeX\ do new
things by adding code at the end of the program. For example, there
might be a `\TeX nicolor' extension to specify different colors of ink,
@^extensions to \TeX@>
and the whatsit node might contain the desired parameters.

The present implementation of \TeX\ treats the features associated with
`\.{\\write}' and `\.{\\special}' as if they were extensions, in order to
illustrate how such routines might be coded. We shall defer further
discussion of extensions until the end of this program.

@d whatsit_node=8 {|type| of special extension nodes}

@ A |math_node|, which occurs only in horizontal lists, appears before and
after mathematical formulas. The |subtype| field is |before| before the
formula and |after| after it. There is a |width| field, which represents
the amount of surrounding space inserted by \.{\\mathsurround}.

@d math_node=9 {|type| of a math node}
@d before=0 {|subtype| for math node that introduces a formula}
@d after=1 {|subtype| for math node that winds up a formula}

@p function new_math(@!w:scaled;@!s:small_number):pointer;
var p:pointer; {the new node}
begin p:=get_node(small_node_size); type(p):=math_node;
subtype(p):=s; width(p):=w; new_math:=p;
end;

@ \TeX\ makes use of the fact that |hlist_node|, |vlist_node|,
|rule_node|, |ins_node|, |mark_node|, |adjust_node|, |ligature_node|,
|disc_node|, |whatsit_node|, and |math_node| are at the low end of the
type codes, by permitting a break at glue in a list if and only if the
|type| of the previous node is less than |math_node|. Furthermore, a
node is discarded after a break if its type is |math_node| or~more.

@d precedes_break(#)==(type(#)<math_node)
@d non_discardable(#)==(type(#)<math_node)

@ A |glue_node| represents glue in a list. However, it is really only
a pointer to a separate glue specification, since \TeX\ makes use of the
fact that many essentially identical nodes of glue are usually present.
If |p| points to a |glue_node|, |glue_ptr(p)| points to
another packet of words that specify the stretch and shrink components, etc.

Glue nodes also serve to represent leaders; the |subtype| is used to
distinguish between ordinary glue (which is called |normal|) and the three
kinds of leaders (which are called |a_leaders|, |c_leaders|, and |x_leaders|).
The |leader_ptr| field points to a rule node or to a box node containing the
leaders; it is set to |null| in ordinary glue nodes.

Many kinds of glue are computed from \TeX's ``skip'' parameters, and
it is helpful to know which parameter has led to a particular glue node.
Therefore the |subtype| is set to indicate the source of glue, whenever
it originated as a parameter. We will be defining symbolic names for the
parameter numbers later (e.g., |line_skip_code=0|, |baseline_skip_code=1|,
etc.); it suffices for now to say that the |subtype| of parametric glue
will be the same as the parameter number, plus~one.

In math formulas there are two more possibilities for the |subtype| in a
glue node: |mu_glue| denotes an \.{\\mskip} (where the units are scaled \.{mu}
instead of scaled \.{pt}); and |cond_math_glue| denotes the `\.{\\nonscript}'
feature that cancels the glue node immediately following if it appears
in a subscript.

@d glue_node=10 {|type| of node that points to a glue specification}
@d cond_math_glue=98 {special |subtype| to suppress glue in the next node}
@d mu_glue=99 {|subtype| for math glue}
@d a_leaders=100 {|subtype| for aligned leaders}
@d c_leaders=101 {|subtype| for centered leaders}
@d x_leaders=102 {|subtype| for expanded leaders}
@d glue_ptr==llink {pointer to a glue specification}
@d leader_ptr==rlink {pointer to box or rule node for leaders}

@ A glue specification has a halfword reference count in its first word,
@^reference counts@>
representing |null| plus the number of glue nodes that point to it (less one).
Note that the reference count appears in the same position as
the |link| field in list nodes; this is the field that is initialized
to |null| when a node is allocated, and it is also the field that is flagged
by |empty_flag| in empty nodes.

Glue specifications also contain three |scaled| fields, for the |width|,
|stretch|, and |shrink| dimensions. Finally, there are two one-byte
fields called |stretch_order| and |shrink_order|; these contain the
orders of infinity (|normal|, |fil|, |fill|, or |filll|)
corresponding to the stretch and shrink values.

@d glue_spec_size=4 {number of words to allocate for a glue specification}
@d glue_ref_count(#) == link(#) {reference count of a glue specification}
@d stretch(#) == mem[#+2].sc {the stretchability of this glob of glue}
@d shrink(#) == mem[#+3].sc {the shrinkability of this glob of glue}
@d stretch_order == type {order of infinity for stretching}
@d shrink_order == subtype {order of infinity for shrinking}
@d fil=1 {first-order infinity}
@d fill=2 {second-order infinity}
@d filll=3 {third-order infinity}

@<Types...@>=
@!glue_ord=normal..filll; {infinity to the 0, 1, 2, or 3 power}

@ Here is a function that returns a pointer to a copy of a glue spec.
The reference count in the copy is |null|, because there is assumed
to be exactly one reference to the new specification.

@p function new_spec(@!p:pointer):pointer; {duplicates a glue specification}
var q:pointer; {the new spec}
begin q:=get_node(glue_spec_size);@/
mem[q]:=mem[p]; glue_ref_count(q):=null;@/
width(q):=width(p); stretch(q):=stretch(p); shrink(q):=shrink(p);
new_spec:=q;
end;

@ And here's a function that creates a glue node for a given parameter
identified by its code number; for example,
|new_param_glue(line_skip_code)| returns a pointer to a glue node for the
current \.{\\lineskip}.

@p function new_param_glue(@!n:small_number):pointer;
var p:pointer; {the new node}
@!q:pointer; {the glue specification}
begin p:=get_node(small_node_size); type(p):=glue_node; subtype(p):=n+1;
leader_ptr(p):=null;@/
q:=@<Current |mem| equivalent of glue parameter number |n|@>@t@>;
glue_ptr(p):=q; incr(glue_ref_count(q));
new_param_glue:=p;
end;

@ Glue nodes that are more or less anonymous are created by |new_glue|,
whose argument points to a glue specification.

@p function new_glue(@!q:pointer):pointer;
var p:pointer; {the new node}
begin p:=get_node(small_node_size); type(p):=glue_node; subtype(p):=normal;
leader_ptr(p):=null; glue_ptr(p):=q; incr(glue_ref_count(q));
new_glue:=p;
end;

@ Still another subroutine is needed: this one is sort of a combination
of |new_param_glue| and |new_glue|. It creates a glue node for one of
the current glue parameters, but it makes a fresh copy of the glue
specification, since that specification will probably be subject to change,
while the parameter will stay put. The global variable |temp_ptr| is
set to the address of the new spec.

@p function new_skip_param(@!n:small_number):pointer;
var p:pointer; {the new node}
begin temp_ptr:=new_spec(@<Current |mem| equivalent of glue parameter...@>);
p:=new_glue(temp_ptr); glue_ref_count(temp_ptr):=null; subtype(p):=n+1;
new_skip_param:=p;
end;

@ A |kern_node| has a |width| field to specify a (normally negative)
amount of spacing. This spacing correction appears in horizontal lists
between letters like A and V when the font designer said that it looks
better to move them closer together or further apart. A kern node can
also appear in a vertical list, when its `|width|' denotes additional
spacing in the vertical direction. The |subtype| is either |normal| (for
kerns inserted from font information or math mode calculations) or |explicit|
(for kerns inserted from \.{\\kern} and \.{\\/} commands) or |acc_kern|
(for kerns inserted from non-math accents) or |mu_glue| (for kerns
inserted from \.{\\mkern} specifications in math formulas).

@d kern_node=11 {|type| of a kern node}
@d explicit=1 {|subtype| of kern nodes from \.{\\kern} and \.{\\/}}
@d acc_kern=2 {|subtype| of kern nodes from accents}

@ The |new_kern| function creates a kern node having a given width.

@p function new_kern(@!w:scaled):pointer;
var p:pointer; {the new node}
begin p:=get_node(small_node_size); type(p):=kern_node;
subtype(p):=normal;
width(p):=w;
new_kern:=p;
end;

@ A |penalty_node| specifies the penalty associated with line or page
breaking, in its |penalty| field. This field is a fullword integer, but
the full range of integer values is not used: Any penalty |>=10000| is
treated as infinity, and no break will be allowed for such high values.
Similarly, any penalty |<=-10000| is treated as negative infinity, and a
break will be forced.

@d penalty_node=12 {|type| of a penalty node}
@d inf_penalty=inf_bad {``infinite'' penalty value}
@d eject_penalty=-inf_penalty {``negatively infinite'' penalty value}
@d penalty(#) == mem[#+1].int {the added cost of breaking a list here}

@ Anyone who has been reading the last few sections of the program will
be able to guess what comes next.

@p function new_penalty(@!m:integer):pointer;
var p:pointer; {the new node}
begin p:=get_node(small_node_size); type(p):=penalty_node;
subtype(p):=0; {the |subtype| is not used}
penalty(p):=m; new_penalty:=p;
end;

@ You might think that we have introduced enough node types by now. Well,
almost, but there is one more: An |unset_node| has nearly the same format
as an |hlist_node| or |vlist_node|; it is used for entries in \.{\\halign}
or \.{\\valign} that are not yet in their final form, since the box
dimensions are their ``natural'' sizes before any glue adjustment has been
made. The |glue_set| word is not present; instead, we have a |glue_stretch|
field, which contains the total stretch of order |glue_order| that is
present in the hlist or vlist being boxed.
Similarly, the |shift_amount| field is replaced by a |glue_shrink| field,
containing the total shrink of order |glue_sign| that is present.
The |subtype| field is called |span_count|; an unset box typically
contains the data for |qo(span_count)+1| columns.
Unset nodes will be changed to box nodes when alignment is completed.

@d unset_node=13 {|type| for an unset node}
@d glue_stretch(#)==mem[#+glue_offset].sc {total stretch in an unset node}
@d glue_shrink==shift_amount {total shrink in an unset node}
@d span_count==subtype {indicates the number of spanned columns}

@ In fact, there are still more types coming. When we get to math formula
processing we will see that a |style_node| has |type=14|; and a number
of larger type codes will also be defined, for use in math mode only.

@ Warning: If any changes are made to these data structure layouts, such as
changing any of the node sizes or even reordering the words of nodes,
the |copy_node_list| procedure and the memory initialization code
below may have to be changed. Such potentially dangerous parts of the
program are listed in the index under `data structure assumptions'.
@!@^data structure assumptions@>
However, other references to the nodes are made symbolically in terms of
the \.{WEB} macro definitions above, so that format changes will leave
\TeX's other algorithms intact.
@^system dependencies@>

@* \[11] Memory layout.
Some areas of |mem| are dedicated to fixed usage, since static allocation is
more efficient than dynamic allocation when we can get away with it. For
example, locations |mem_bot| to |mem_bot+3| are always used to store the
specification for glue that is `\.{0pt plus 0pt minus 0pt}'. The
following macro definitions accomplish the static allocation by giving
symbolic names to the fixed positions. Static variable-size nodes appear
in locations |mem_bot| through |lo_mem_stat_max|, and static single-word nodes
appear in locations |hi_mem_stat_min| through |mem_top|, inclusive. It is
harmless to let |lig_trick| and |garbage| share the same location of |mem|.

@d zero_glue==mem_bot {specification for \.{0pt plus 0pt minus 0pt}}
@d fil_glue==zero_glue+glue_spec_size {\.{0pt plus 1fil minus 0pt}}
@d fill_glue==fil_glue+glue_spec_size {\.{0pt plus 1fill minus 0pt}}
@d ss_glue==fill_glue+glue_spec_size {\.{0pt plus 1fil minus 1fil}}
@d fil_neg_glue==ss_glue+glue_spec_size {\.{0pt plus -1fil minus 0pt}}
@d lo_mem_stat_max==fil_neg_glue+glue_spec_size-1 {largest statically
  allocated word in the variable-size |mem|}
@#
@d page_ins_head==mem_top {list of insertion data for current page}
@d contrib_head==mem_top-1 {vlist of items not yet on current page}
@d page_head==mem_top-2 {vlist for current page}
@d temp_head==mem_top-3 {head of a temporary list of some kind}
@d hold_head==mem_top-4 {head of a temporary list of another kind}
@d adjust_head==mem_top-5 {head of adjustment list returned by |hpack|}
@d active==mem_top-7 {head of active list in |line_break|, needs two words}
@d align_head==mem_top-8 {head of preamble list for alignments}
@d end_span==mem_top-9 {tail of spanned-width lists}
@d omit_template==mem_top-10 {a constant token list}
@d null_list==mem_top-11 {permanently empty list}
@d lig_trick==mem_top-12 {a ligature masquerading as a |char_node|}
@d garbage==mem_top-12 {used for scrap information}
@d backup_head==mem_top-13 {head of token list built by |scan_keyword|}
@d hi_mem_stat_min==mem_top-13 {smallest statically allocated word in
  the one-word |mem|}
@d hi_mem_stat_usage=14 {the number of one-word nodes always present}

@ The following code gets |mem| off to a good start, when \TeX\ is
initializing itself the slow~way.

@<Local variables for init...@>=
@!k:integer; {index into |mem|, |eqtb|, etc.}

@ @<Initialize table entries...@>=
for k:=mem_bot+1 to lo_mem_stat_max do mem[k].sc:=0;
  {all glue dimensions are zeroed}
@^data structure assumptions@>
k:=mem_bot;@+while k<=lo_mem_stat_max do
    {set first words of glue specifications}
  begin glue_ref_count(k):=null+1;
  stretch_order(k):=normal; shrink_order(k):=normal;
  k:=k+glue_spec_size;
  end;
stretch(fil_glue):=unity; stretch_order(fil_glue):=fil;@/
stretch(fill_glue):=unity; stretch_order(fill_glue):=fill;@/
stretch(ss_glue):=unity; stretch_order(ss_glue):=fil;@/
shrink(ss_glue):=unity; shrink_order(ss_glue):=fil;@/
stretch(fil_neg_glue):=-unity; stretch_order(fil_neg_glue):=fil;@/
rover:=lo_mem_stat_max+1;
link(rover):=empty_flag; {now initialize the dynamic memory}
node_size(rover):=1000; {which is a 1000-word available node}
llink(rover):=rover; rlink(rover):=rover;@/
lo_mem_max:=rover+1000; link(lo_mem_max):=null; info(lo_mem_max):=null;@/
for k:=hi_mem_stat_min to mem_top do
  mem[k]:=mem[lo_mem_max]; {clear list heads}
@<Initialize the special list heads and constant nodes@>;
avail:=null; mem_end:=mem_top;
hi_mem_min:=hi_mem_stat_min; {initialize the one-word memory}
var_used:=lo_mem_stat_max+1-mem_bot; dyn_used:=hi_mem_stat_usage;
  {initialize statistics}

@ If \TeX\ is extended improperly, the |mem| array might get screwed up.
For example, some pointers might be wrong, or some ``dead'' nodes might not
have been freed when the last reference to them disappeared. Procedures
|check_mem| and |search_mem| are available to help diagnose such
problems. These procedures make use of two arrays called |free| and
|was_free| that are present only if \TeX's debugging routines have
been included. (You may want to decrease the size of |mem| while you
@^debugging@>
are debugging.)

@<Glob...@>=
@!debug @!free: packed array [mem_min..mem_max] of boolean; {free cells}
@t\hskip10pt@>@!was_free: packed array [mem_min..mem_max] of boolean;
  {previously free cells}
@t\hskip10pt@>@!was_mem_end,@!was_lo_max,@!was_hi_min: pointer;
  {previous |mem_end|, |lo_mem_max|, and |hi_mem_min|}
@t\hskip10pt@>@!panicking:boolean; {do we want to check memory constantly?}
gubed

@ @<Set initial...@>=
@!debug was_mem_end:=mem_min; {indicate that everything was previously free}
was_lo_max:=mem_min; was_hi_min:=mem_max;
panicking:=false;
gubed

@ Procedure |check_mem| makes sure that the available space lists of
|mem| are well formed, and it optionally prints out all locations
that are reserved now but were free the last time this procedure was called.

@p @!debug procedure check_mem(@!print_locs : boolean);
label done1,done2; {loop exits}
var p,@!q:pointer; {current locations of interest in |mem|}
@!clobbered:boolean; {is something amiss?}
begin for p:=mem_min to lo_mem_max do free[p]:=false; {you can probably
  do this faster}
for p:=hi_mem_min to mem_end do free[p]:=false; {ditto}
@<Check single-word |avail| list@>;
@<Check variable-size |avail| list@>;
@<Check flags of unavailable nodes@>;
if print_locs then @<Print newly busy locations@>;
for p:=mem_min to lo_mem_max do was_free[p]:=free[p];
for p:=hi_mem_min to mem_end do was_free[p]:=free[p];
  {|was_free:=free| might be faster}
was_mem_end:=mem_end; was_lo_max:=lo_mem_max; was_hi_min:=hi_mem_min;
end;
gubed

@ @<Check single-word...@>=
p:=avail; q:=null; clobbered:=false;
while p<>null do
  begin if (p>mem_end)or(p<hi_mem_min) then clobbered:=true
  else if free[p] then clobbered:=true;
  if clobbered then
    begin print_nl("AVAIL list clobbered at ");
@.AVAIL list clobbered...@>
    print_int(q); goto done1;
    end;
  free[p]:=true; q:=p; p:=link(q);
  end;
done1:

@ @<Check variable-size...@>=
p:=rover; q:=null; clobbered:=false;
repeat if (p>=lo_mem_max)or(p<mem_min) then clobbered:=true
  else if (rlink(p)>=lo_mem_max)or(rlink(p)<mem_min) then clobbered:=true
  else if  not(is_empty(p))or(node_size(p)<2)or@|
   (p+node_size(p)>lo_mem_max)or@| (llink(rlink(p))<>p) then clobbered:=true;
  if clobbered then
  begin print_nl("Double-AVAIL list clobbered at ");
  print_int(q); goto done2;
  end;
for q:=p to p+node_size(p)-1 do {mark all locations free}
  begin if free[q] then
    begin print_nl("Doubly free location at ");
@.Doubly free location...@>
    print_int(q); goto done2;
    end;
  free[q]:=true;
  end;
q:=p; p:=rlink(p);
until p=rover;
done2:

@ @<Check flags...@>=
p:=mem_min;
while p<=lo_mem_max do {node |p| should not be empty}
  begin if is_empty(p) then
    begin print_nl("Bad flag at "); print_int(p);
@.Bad flag...@>
    end;
  while (p<=lo_mem_max) and not free[p] do incr(p);
  while (p<=lo_mem_max) and free[p] do incr(p);
  end

@ @<Print newly busy...@>=
begin print_nl("New busy locs:");
for p:=mem_min to lo_mem_max do
  if not free[p] and ((p>was_lo_max) or was_free[p]) then
    begin print_char(" "); print_int(p);
    end;
for p:=hi_mem_min to mem_end do
  if not free[p] and
   ((p<was_hi_min) or (p>was_mem_end) or was_free[p]) then
    begin print_char(" "); print_int(p);
    end;
end

@ The |search_mem| procedure attempts to answer the question ``Who points
to node~|p|?'' In doing so, it fetches |link| and |info| fields of |mem|
that might not be of type |two_halves|. Strictly speaking, this is
@^dirty \PASCAL@>
undefined in \PASCAL, and it can lead to ``false drops'' (words that seem to
point to |p| purely by coincidence). But for debugging purposes, we want
to rule out the places that do {\sl not\/} point to |p|, so a few false
drops are tolerable.

@p @!debug procedure search_mem(@!p:pointer); {look for pointers to |p|}
var q:integer; {current position being searched}
begin for q:=mem_min to lo_mem_max do
  begin if link(q)=p then
    begin print_nl("LINK("); print_int(q); print_char(")");
    end;
  if info(q)=p then
    begin print_nl("INFO("); print_int(q); print_char(")");
    end;
  end;
for q:=hi_mem_min to mem_end do
  begin if link(q)=p then
    begin print_nl("LINK("); print_int(q); print_char(")");
    end;
  if info(q)=p then
    begin print_nl("INFO("); print_int(q); print_char(")");
    end;
  end;
@<Search |eqtb| for equivalents equal to |p|@>;
@<Search |save_stack| for equivalents that point to |p|@>;
@<Search |hyph_list| for pointers to |p|@>;
end;
gubed

@* \[12] Displaying boxes.
We can reinforce our knowledge of the data structures just introduced
by considering two procedures that display a list in symbolic form.
The first of these, called |short_display|, is used in ``overfull box''
messages to give the top-level description of a list. The other one,
called |show_node_list|, prints a detailed description of exactly what
is in the data structure.

The philosophy of |short_display| is to ignore the fine points about exactly
what is inside boxes, except that ligatures and discretionary breaks are
expanded. As a result, |short_display| is a recursive procedure, but the
recursion is never more than one level deep.
@^recursion@>

A global variable |font_in_short_display| keeps track of the font code that
is assumed to be present when |short_display| begins; deviations from this
font will be printed.

@<Glob...@>=
@!font_in_short_display:integer; {an internal font number}

@ Boxes, rules, inserts, whatsits, marks, and things in general that are
sort of ``complicated'' are indicated only by printing `\.{[]}'.

@p procedure short_display(@!p:integer); {prints highlights of list |p|}
var n:integer; {for replacement counts}
begin while p>mem_min do
  begin if is_char_node(p) then
    begin if p<=mem_end then
      begin if font(p)<>font_in_short_display then
        begin if (font(p)<font_base)or(font(p)>font_max) then
          print_char("*")
@.*\relax@>
        else @<Print the font identifier for |font(p)|@>;
        print_char(" "); font_in_short_display:=font(p);
        end;
      print_ASCII(qo(character(p)));
      end;
    end
  else @<Print a short indication of the contents of node |p|@>;
  p:=link(p);
  end;
end;

@ @<Print a short indication of the contents of node |p|@>=
case type(p) of
hlist_node,vlist_node,ins_node,whatsit_node,mark_node,adjust_node,
  unset_node: print("[]");
rule_node: print_char("|");
glue_node: if glue_ptr(p)<>zero_glue then print_char(" ");
math_node: print_char("$");
ligature_node: short_display(lig_ptr(p));
disc_node: begin short_display(pre_break(p));
  short_display(post_break(p));@/
  n:=replace_count(p);
  while n>0 do
    begin if link(p)<>null then p:=link(p);
    decr(n);
    end;
  end;
othercases do_nothing
endcases

@ The |show_node_list| routine requires some auxiliary subroutines: one to
print a font-and-character combination, one to print a token list without
its reference count, and one to print a rule dimension.

@p procedure print_font_and_char(@!p:integer); {prints |char_node| data}
begin if p>mem_end then print_esc("CLOBBERED.")
else  begin if (font(p)<font_base)or(font(p)>font_max) then print_char("*")
@.*\relax@>
  else @<Print the font identifier for |font(p)|@>;
  print_char(" "); print_ASCII(qo(character(p)));
  end;
end;
@#
procedure print_mark(@!p:integer); {prints token list data in braces}
begin print_char("{");
if (p<hi_mem_min)or(p>mem_end) then print_esc("CLOBBERED.")
else show_token_list(link(p),null,max_print_line-10);
print_char("}");
end;
@#
procedure print_rule_dimen(@!d:scaled); {prints dimension in rule node}
begin if is_running(d) then print_char("*") else print_scaled(d);
@.*\relax@>
end;

@ Then there is a subroutine that prints glue stretch and shrink, possibly
followed by the name of finite units:

@p procedure print_glue(@!d:scaled;@!order:integer;@!s:str_number);
  {prints a glue component}
begin print_scaled(d);
if (order<normal)or(order>filll) then print("foul")
else if order>normal then
  begin print("fil");
  while order>fil do
    begin print_char("l"); decr(order);
    end;
  end
else if s<>0 then print(s);
end;

@ The next subroutine prints a whole glue specification.

@p procedure print_spec(@!p:integer;@!s:str_number);
  {prints a glue specification}
begin if (p<mem_min)or(p>=lo_mem_max) then print_char("*")
@.*\relax@>
else  begin print_scaled(width(p));
  if s<>0 then print(s);
  if stretch(p)<>0 then
    begin print(" plus "); print_glue(stretch(p),stretch_order(p),s);
    end;
  if shrink(p)<>0 then
    begin print(" minus "); print_glue(shrink(p),shrink_order(p),s);
    end;
  end;
end;

@ We also need to declare some procedures that appear later in this
documentation.

@p @<Declare procedures needed for displaying the elements of mlists@>@;
@<Declare the procedure called |print_skip_param|@>

@ Since boxes can be inside of boxes, |show_node_list| is inherently recursive,
@^recursion@>
up to a given maximum number of levels.  The history of nesting is indicated
by the current string, which will be printed at the beginning of each line;
the length of this string, namely |cur_length|, is the depth of nesting.

Recursive calls on |show_node_list| therefore use the following pattern:

@d node_list_display(#)==
  begin append_char("."); show_node_list(#); flush_char;
  end {|str_room| need not be checked; see |show_box| below}

@ A global variable called |depth_threshold| is used to record the maximum
depth of nesting for which |show_node_list| will show information.  If we
have |depth_threshold=0|, for example, only the top level information will
be given and no sublists will be traversed. Another global variable, called
|breadth_max|, tells the maximum number of items to show at each level;
|breadth_max| had better be positive, or you won't see anything.

@<Glob...@>=
@!depth_threshold : integer; {maximum nesting depth in box displays}
@!breadth_max : integer; {maximum number of items shown at the same list level}

@ Now we are ready for |show_node_list| itself. This procedure has been
written to be ``extra robust'' in the sense that it should not crash or get
into a loop even if the data structures have been messed up by bugs in
the rest of the program. You can safely call its parent routine
|show_box(p)| for arbitrary values of |p| when you are debugging \TeX.
However, in the presence of bad data, the procedure may
@^dirty \PASCAL@>@^debugging@>
fetch a |memory_word| whose variant is different from the way it was stored;
for example, it might try to read |mem[p].hh| when |mem[p]|
contains a scaled integer, if |p| is a pointer that has been
clobbered or chosen at random.

@p procedure show_node_list(@!p:integer); {prints a node list symbolically}
label exit;
var n:integer; {the number of items already printed at this level}
@!g:real; {a glue ratio, as a floating point number}
begin if cur_length>depth_threshold then
  begin if p>null then print(" []");
    {indicate that there's been some truncation}
  return;
  end;
n:=0;
while p>mem_min do
  begin print_ln; print_current_string; {display the nesting history}
  if p>mem_end then {pointer out of range}
    begin print("Bad link, display aborted."); return;
@.Bad link...@>
    end;
  incr(n); if n>breadth_max then {time to stop}
    begin print("etc."); return;
@.etc@>
    end;
  @<Display node |p|@>;
  p:=link(p);
  end;
exit:
end;

@ @<Display node |p|@>=
if is_char_node(p) then print_font_and_char(p)
else  case type(p) of
  hlist_node,vlist_node,unset_node: @<Display box |p|@>;
  rule_node: @<Display rule |p|@>;
  ins_node: @<Display insertion |p|@>;
  whatsit_node: @<Display the whatsit node |p|@>;
  glue_node: @<Display glue |p|@>;
  kern_node: @<Display kern |p|@>;
  math_node: @<Display math node |p|@>;
  ligature_node: @<Display ligature |p|@>;
  penalty_node: @<Display penalty |p|@>;
  disc_node: @<Display discretionary |p|@>;
  mark_node: @<Display mark |p|@>;
  adjust_node: @<Display adjustment |p|@>;
  @t\4@>@<Cases of |show_node_list| that arise in mlists only@>@;
  othercases print("Unknown node type!")
  endcases

@ @<Display box |p|@>=
begin if type(p)=hlist_node then print_esc("h")
else if type(p)=vlist_node then print_esc("v")
else print_esc("unset");
print("box("); print_scaled(height(p)); print_char("+");
print_scaled(depth(p)); print(")x"); print_scaled(width(p));
if type(p)=unset_node then
  @<Display special fields of the unset node |p|@>
else  begin @<Display the value of |glue_set(p)|@>;
  if shift_amount(p)<>0 then
    begin print(", shifted "); print_scaled(shift_amount(p));
    end;
  end;
node_list_display(list_ptr(p)); {recursive call}
end

@ @<Display special fields of the unset node |p|@>=
begin if span_count(p)<>min_quarterword then
  begin print(" ("); print_int(qo(span_count(p))+1);
  print(" columns)");
  end;
if glue_stretch(p)<>0 then
  begin print(", stretch "); print_glue(glue_stretch(p),glue_order(p),0);
  end;
if glue_shrink(p)<>0 then
  begin print(", shrink "); print_glue(glue_shrink(p),glue_sign(p),0);
  end;
end

@ The code will have to change in this place if |glue_ratio| is
a structured type instead of an ordinary |real|. Note that this routine
should avoid arithmetic errors even if the |glue_set| field holds an
arbitrary random value. The following code assumes that a properly
formed nonzero |real| number has absolute value $2^{20}$ or more when
it is regarded as an integer; this precaution was adequate to prevent
floating point underflow on the author's computer.
@^system dependencies@>
@^dirty \PASCAL@>

@<Display the value of |glue_set(p)|@>=
g:=float(glue_set(p));
if (g<>float_constant(0))and(glue_sign(p)<>normal) then
  begin print(", glue set ");
  if glue_sign(p)=shrinking then print("- ");
  if abs(mem[p+glue_offset].int)<@'4000000 then print("?.?")
  else if abs(g)>float_constant(20000) then
    begin if g>float_constant(0) then print_char(">")
    else print("< -");
    print_glue(20000*unity,glue_order(p),0);
    end
  else print_glue(round(unity*g),glue_order(p),0);
@^real multiplication@>
  end

@ @<Display rule |p|@>=
begin print_esc("rule("); print_rule_dimen(height(p)); print_char("+");
print_rule_dimen(depth(p)); print(")x"); print_rule_dimen(width(p));
end

@ @<Display insertion |p|@>=
begin print_esc("insert"); print_int(qo(subtype(p)));
print(", natural size "); print_scaled(height(p));
print("; split("); print_spec(split_top_ptr(p),0);
print_char(","); print_scaled(depth(p));
print("); float cost "); print_int(float_cost(p));
node_list_display(ins_ptr(p)); {recursive call}
end

@ @<Display glue |p|@>=
if subtype(p)>=a_leaders then @<Display leaders |p|@>
else  begin print_esc("glue");
  if subtype(p)<>normal then
    begin print_char("(");
    if subtype(p)<cond_math_glue then
      print_skip_param(subtype(p)-1)
    else if subtype(p)=cond_math_glue then print_esc("nonscript")
    else print_esc("mskip");
    print_char(")");
    end;
  if subtype(p)<>cond_math_glue then
    begin print_char(" ");
    if subtype(p)<cond_math_glue then print_spec(glue_ptr(p),0)
    else print_spec(glue_ptr(p),"mu");
    end;
  end

@ @<Display leaders |p|@>=
begin print_esc("");
if subtype(p)=c_leaders then print_char("c")
else if subtype(p)=x_leaders then print_char("x");
print("leaders "); print_spec(glue_ptr(p),0);
node_list_display(leader_ptr(p)); {recursive call}
end

@ An ``explicit'' kern value is indicated implicitly by an explicit space.

@<Display kern |p|@>=
if subtype(p)<>mu_glue then
  begin print_esc("kern");
  if subtype(p)<>normal then print_char(" ");
  print_scaled(width(p));
  if subtype(p)=acc_kern then print(" (for accent)");
@.for accent@>
  end
else  begin print_esc("mkern"); print_scaled(width(p)); print("mu");
  end

@ @<Display math node |p|@>=
begin print_esc("math");
if subtype(p)=before then print("on")
else print("off");
if width(p)<>0 then
  begin print(", surrounded "); print_scaled(width(p));
  end;
end

@ @<Display ligature |p|@>=
begin print_font_and_char(lig_char(p)); print(" (ligature ");
if subtype(p)>1 then print_char("|");
font_in_short_display:=font(lig_char(p)); short_display(lig_ptr(p));
if odd(subtype(p)) then print_char("|");
print_char(")");
end

@ @<Display penalty |p|@>=
begin print_esc("penalty "); print_int(penalty(p));
end

@ The |post_break| list of a discretionary node is indicated by a prefixed
`\.{\char'174}' instead of the `\..' before the |pre_break| list.

@<Display discretionary |p|@>=
begin print_esc("discretionary");
if replace_count(p)>0 then
  begin print(" replacing "); print_int(replace_count(p));
  end;
node_list_display(pre_break(p)); {recursive call}
append_char("|"); show_node_list(post_break(p)); flush_char; {recursive call}
end

@ @<Display mark |p|@>=
begin print_esc("mark"); print_mark(mark_ptr(p));
end

@ @<Display adjustment |p|@>=
begin print_esc("vadjust"); node_list_display(adjust_ptr(p)); {recursive call}
end

@ The recursive machinery is started by calling |show_box|.
@^recursion@>

@p procedure show_box(@!p:pointer);
begin @<Assign the values |depth_threshold:=show_box_depth| and
  |breadth_max:=show_box_breadth|@>;
if breadth_max<=0 then breadth_max:=5;
if pool_ptr+depth_threshold>=pool_size then
  depth_threshold:=pool_size-pool_ptr-1;
  {now there's enough room for prefix string}
show_node_list(p); {the show starts at |p|}
print_ln;
end;

@* \[13] Destroying boxes.
When we are done with a node list, we are obliged to return it to free
storage, including all of its sublists. The recursive procedure
|flush_node_list| does this for us.

@ First, however, we shall consider two non-recursive procedures that do
simpler tasks. The first of these, |delete_token_ref|, is called when
a pointer to a token list's reference count is being removed. This means
that the token list should disappear if the reference count was |null|,
otherwise the count should be decreased by one.
@^reference counts@>

@d token_ref_count(#) == info(#) {reference count preceding a token list}

@p procedure delete_token_ref(@!p:pointer); {|p| points to the reference count
  of a token list that is losing one reference}
begin if token_ref_count(p)=null then flush_list(p)
else decr(token_ref_count(p));
end;

@ Similarly, |delete_glue_ref| is called when a pointer to a glue
specification is being withdrawn.
@^reference counts@>
@d fast_delete_glue_ref(#)==@t@>@;@/
  begin if glue_ref_count(#)=null then free_node(#,glue_spec_size)
  else decr(glue_ref_count(#));
  end

@p procedure delete_glue_ref(@!p:pointer); {|p| points to a glue specification}
fast_delete_glue_ref(p);

@ Now we are ready to delete any node list, recursively.
In practice, the nodes deleted are usually charnodes (about 2/3 of the time),
and they are glue nodes in about half of the remaining cases.
@^recursion@>

@p procedure flush_node_list(@!p:pointer); {erase list of nodes starting at |p|}
label done; {go here when node |p| has been freed}
var q:pointer; {successor to node |p|}
begin while p<>null do
@^inner loop@>
  begin q:=link(p);
  if is_char_node(p) then free_avail(p)
  else  begin case type(p) of
    hlist_node,vlist_node,unset_node: begin flush_node_list(list_ptr(p));
      free_node(p,box_node_size); goto done;
      end;
    rule_node: begin free_node(p,rule_node_size); goto done;
      end;
    ins_node: begin flush_node_list(ins_ptr(p));
      delete_glue_ref(split_top_ptr(p));
      free_node(p,ins_node_size); goto done;
      end;
    whatsit_node: @<Wipe out the whatsit node |p| and |goto done|@>;
    glue_node: begin fast_delete_glue_ref(glue_ptr(p));
      if leader_ptr(p)<>null then flush_node_list(leader_ptr(p));
      end;
    kern_node,math_node,penalty_node: do_nothing;
    ligature_node: flush_node_list(lig_ptr(p));
    mark_node: delete_token_ref(mark_ptr(p));
    disc_node: begin flush_node_list(pre_break(p));
      flush_node_list(post_break(p));
      end;
    adjust_node: flush_node_list(adjust_ptr(p));
    @t\4@>@<Cases of |flush_node_list| that arise in mlists only@>@;
    othercases confusion("flushing")
@:this can't happen flushing}{\quad flushing@>
    endcases;@/
    free_node(p,small_node_size);
    done:end;
  p:=q;
  end;
end;

@* \[14] Copying boxes.
Another recursive operation that acts on boxes is sometimes needed: The
procedure |copy_node_list| returns a pointer to another node list that has
the same structure and meaning as the original. Note that since glue
specifications and token lists have reference counts, we need not make
copies of them. Reference counts can never get too large to fit in a
halfword, since each pointer to a node is in a different memory address,
and the total number of memory addresses fits in a halfword.
@^recursion@>
@^reference counts@>

(Well, there actually are also references from outside |mem|; if the
|save_stack| is made arbitrarily large, it would theoretically be possible
to break \TeX\ by overflowing a reference count. But who would want to do that?)

@d add_token_ref(#)==incr(token_ref_count(#)) {new reference to a token list}
@d add_glue_ref(#)==incr(glue_ref_count(#)) {new reference to a glue spec}

@ The copying procedure copies words en masse without bothering
to look at their individual fields. If the node format changes---for
example, if the size is altered, or if some link field is moved to another
relative position---then this code may need to be changed too.
@^data structure assumptions@>

@p function copy_node_list(@!p:pointer):pointer; {makes a duplicate of the
  node list that starts at |p| and returns a pointer to the new list}
var h:pointer; {temporary head of copied list}
@!q:pointer; {previous position in new list}
@!r:pointer; {current node being fabricated for new list}
@!words:0..5; {number of words remaining to be copied}
begin h:=get_avail; q:=h;
while p<>null do
  begin @<Make a copy of node |p| in node |r|@>;
  link(q):=r; q:=r; p:=link(p);
  end;
link(q):=null; q:=link(h); free_avail(h);
copy_node_list:=q;
end;

@ @<Make a copy of node |p|...@>=
words:=1; {this setting occurs in more branches than any other}
if is_char_node(p) then r:=get_avail
else @<Case statement to copy different types and set |words| to the number
  of initial words not yet copied@>;
while words>0 do
  begin decr(words); mem[r+words]:=mem[p+words];
  end

@ @<Case statement to copy...@>=
case type(p) of
hlist_node,vlist_node,unset_node: begin r:=get_node(box_node_size);
  mem[r+6]:=mem[p+6]; mem[r+5]:=mem[p+5]; {copy the last two words}
  list_ptr(r):=copy_node_list(list_ptr(p)); {this affects |mem[r+5]|}
  words:=5;
  end;
rule_node: begin r:=get_node(rule_node_size); words:=rule_node_size;
  end;
ins_node: begin r:=get_node(ins_node_size); mem[r+4]:=mem[p+4];
  add_glue_ref(split_top_ptr(p));
  ins_ptr(r):=copy_node_list(ins_ptr(p)); {this affects |mem[r+4]|}
  words:=ins_node_size-1;
  end;
whatsit_node:@<Make a partial copy of the whatsit node |p| and make |r|
  point to it; set |words| to the number of initial words not yet copied@>;
glue_node: begin r:=get_node(small_node_size); add_glue_ref(glue_ptr(p));
  glue_ptr(r):=glue_ptr(p); leader_ptr(r):=copy_node_list(leader_ptr(p));
  end;
kern_node,math_node,penalty_node: begin r:=get_node(small_node_size);
  words:=small_node_size;
  end;
ligature_node: begin r:=get_node(small_node_size);
  mem[lig_char(r)]:=mem[lig_char(p)]; {copy |font| and |character|}
  lig_ptr(r):=copy_node_list(lig_ptr(p));
  end;
disc_node: begin r:=get_node(small_node_size);
  pre_break(r):=copy_node_list(pre_break(p));
  post_break(r):=copy_node_list(post_break(p));
  end;
mark_node: begin r:=get_node(small_node_size); add_token_ref(mark_ptr(p));
  words:=small_node_size;
  end;
adjust_node: begin r:=get_node(small_node_size);
  adjust_ptr(r):=copy_node_list(adjust_ptr(p));
  end; {|words=1=small_node_size-1|}
othercases confusion("copying")
@:this can't happen copying}{\quad copying@>
endcases

@* \[15] The command codes.
Before we can go any further, we need to define symbolic names for the internal
code numbers that represent the various commands obeyed by \TeX. These codes
are somewhat arbitrary, but not completely so. For example, the command
codes for character types are fixed by the language, since a user says,
e.g., `\.{\\catcode \`\\\${} = 3}' to make \.{\char'44} a math delimiter,
and the command code |math_shift| is equal to~3. Some other codes have
been made adjacent so that |case| statements in the program need not consider
cases that are widely spaced, or so that |case| statements can be replaced
by |if| statements.

At any rate, here is the list, for future reference. First come the
``catcode'' commands, several of which share their numeric codes with
ordinary commands when the catcode cannot emerge from \TeX's scanning routine.

@d escape=0 {escape delimiter (called \.\\ in {\sl The \TeX book\/})}
@:TeXbook}{\sl The \TeX book@>
@d relax=0 {do nothing ( \.{\\relax} )}
@d left_brace=1 {beginning of a group ( \.\{ )}
@d right_brace=2 {ending of a group ( \.\} )}
@d math_shift=3 {mathematics shift character ( \.\$ )}
@d tab_mark=4 {alignment delimiter ( \.\&, \.{\\span} )}
@d car_ret=5 {end of line ( |carriage_return|, \.{\\cr}, \.{\\crcr} )}
@d out_param=5 {output a macro parameter}
@d mac_param=6 {macro parameter symbol ( \.\# )}
@d sup_mark=7 {superscript ( \.{\char'136} )}
@d sub_mark=8 {subscript ( \.{\char'137} )}
@d ignore=9 {characters to ignore ( \.{\^\^@@} )}
@d endv=9 {end of \<v_j> list in alignment template}
@d spacer=10 {characters equivalent to blank space ( \.{\ } )}
@d letter=11 {characters regarded as letters ( \.{A..Z}, \.{a..z} )}
@d other_char=12 {none of the special character types}
@d active_char=13 {characters that invoke macros ( \.{\char`\~} )}
@d par_end=13 {end of paragraph ( \.{\\par} )}
@d match=13 {match a macro parameter}
@d comment=14 {characters that introduce comments ( \.\% )}
@d end_match=14 {end of parameters to macro}
@d stop=14 {end of job ( \.{\\end}, \.{\\dump} )}
@d invalid_char=15 {characters that shouldn't appear ( \.{\^\^?} )}
@d delim_num=15 {specify delimiter numerically ( \.{\\delimiter} )}
@d max_char_code=15 {largest catcode for individual characters}

@ Next are the ordinary run-of-the-mill command codes.  Codes that are
|min_internal| or more represent internal quantities that might be
expanded by `\.{\\the}'.

@d char_num=16 {character specified numerically ( \.{\\char} )}
@d math_char_num=17 {explicit math code ( \.{\\mathchar} )}
@d mark=18 {mark definition ( \.{\\mark} )}
@d xray=19 {peek inside of \TeX\ ( \.{\\show}, \.{\\showbox}, etc.~)}
@d make_box=20 {make a box ( \.{\\box}, \.{\\copy}, \.{\\hbox}, etc.~)}
@d hmove=21 {horizontal motion ( \.{\\moveleft}, \.{\\moveright} )}
@d vmove=22 {vertical motion ( \.{\\raise}, \.{\\lower} )}
@d un_hbox=23 {unglue a box ( \.{\\unhbox}, \.{\\unhcopy} )}
@d un_vbox=24 {unglue a box ( \.{\\unvbox}, \.{\\unvcopy} )}
@d remove_item=25 {nullify last item ( \.{\\unpenalty},
  \.{\\unkern}, \.{\\unskip} )}
@d hskip=26 {horizontal glue ( \.{\\hskip}, \.{\\hfil}, etc.~)}
@d vskip=27 {vertical glue ( \.{\\vskip}, \.{\\vfil}, etc.~)}
@d mskip=28 {math glue ( \.{\\mskip} )}
@d kern=29 {fixed space ( \.{\\kern})}
@d mkern=30 {math kern ( \.{\\mkern} )}
@d leader_ship=31 {use a box ( \.{\\shipout}, \.{\\leaders}, etc.~)}
@d halign=32 {horizontal table alignment ( \.{\\halign} )}
@d valign=33 {vertical table alignment ( \.{\\valign} )}
@d no_align=34 {temporary escape from alignment ( \.{\\noalign} )}
@d vrule=35 {vertical rule ( \.{\\vrule} )}
@d hrule=36 {horizontal rule ( \.{\\hrule} )}
@d insert=37 {vlist inserted in box ( \.{\\insert} )}
@d vadjust=38 {vlist inserted in enclosing paragraph ( \.{\\vadjust} )}
@d ignore_spaces=39 {gobble |spacer| tokens ( \.{\\ignorespaces} )}
@d after_assignment=40 {save till assignment is done ( \.{\\afterassignment} )}
@d after_group=41 {save till group is done ( \.{\\aftergroup} )}
@d break_penalty=42 {additional badness ( \.{\\penalty} )}
@d start_par=43 {begin paragraph ( \.{\\indent}, \.{\\noindent} )}
@d ital_corr=44 {italic correction ( \.{\\/} )}
@d accent=45 {attach accent in text ( \.{\\accent} )}
@d math_accent=46 {attach accent in math ( \.{\\mathaccent} )}
@d discretionary=47 {discretionary texts ( \.{\\-}, \.{\\discretionary} )}
@d eq_no=48 {equation number ( \.{\\eqno}, \.{\\leqno} )}
@d left_right=49 {variable delimiter ( \.{\\left}, \.{\\right} )}
@d math_comp=50 {component of formula ( \.{\\mathbin}, etc.~)}
@d limit_switch=51 {diddle limit conventions ( \.{\\displaylimits}, etc.~)}
@d above=52 {generalized fraction ( \.{\\above}, \.{\\atop}, etc.~)}
@d math_style=53 {style specification ( \.{\\displaystyle}, etc.~)}
@d math_choice=54 {choice specification ( \.{\\mathchoice} )}
@d non_script=55 {conditional math glue ( \.{\\nonscript} )}
@d vcenter=56 {vertically center a vbox ( \.{\\vcenter} )}
@d case_shift=57 {force specific case ( \.{\\lowercase}, \.{\\uppercase}~)}
@d message=58 {send to user ( \.{\\message}, \.{\\errmessage} )}
@d extension=59 {extensions to \TeX\ ( \.{\\write}, \.{\\special}, etc.~)}
@d in_stream=60 {files for reading ( \.{\\openin}, \.{\\closein} )}
@d begin_group=61 {begin local grouping ( \.{\\begingroup} )}
@d end_group=62 {end local grouping ( \.{\\endgroup} )}
@d omit=63 {omit alignment template ( \.{\\omit} )}
@d ex_space=64 {explicit space ( \.{\\\ } )}
@d no_boundary=65 {suppress boundary ligatures ( \.{\\noboundary} )}
@d radical=66 {square root and similar signs ( \.{\\radical} )}
@d end_cs_name=67 {end control sequence ( \.{\\endcsname} )}
@d min_internal=68 {the smallest code that can follow \.{\\the}}
@d char_given=68 {character code defined by \.{\\chardef}}
@d math_given=69 {math code defined by \.{\\mathchardef}}
@d last_item=70 {most recent item ( \.{\\lastpenalty},
  \.{\\lastkern}, \.{\\lastskip} )}
@d max_non_prefixed_command=70 {largest command code that can't be \.{\\global}}

@ The next codes are special; they all relate to mode-independent
assignment of values to \TeX's internal registers or tables.
Codes that are |max_internal| or less represent internal quantities
that might be expanded by `\.{\\the}'.

@d toks_register=71 {token list register ( \.{\\toks} )}
@d assign_toks=72 {special token list ( \.{\\output}, \.{\\everypar}, etc.~)}
@d assign_int=73 {user-defined integer ( \.{\\tolerance}, \.{\\day}, etc.~)}
@d assign_dimen=74 {user-defined length ( \.{\\hsize}, etc.~)}
@d assign_glue=75 {user-defined glue ( \.{\\baselineskip}, etc.~)}
@d assign_mu_glue=76 {user-defined muglue ( \.{\\thinmuskip}, etc.~)}
@d assign_font_dimen=77 {user-defined font dimension ( \.{\\fontdimen} )}
@d assign_font_int=78 {user-defined font integer ( \.{\\hyphenchar},
  \.{\\skewchar} )}
@d set_aux=79 {specify state info ( \.{\\spacefactor}, \.{\\prevdepth} )}
@d set_prev_graf=80 {specify state info ( \.{\\prevgraf} )}
@d set_page_dimen=81 {specify state info ( \.{\\pagegoal}, etc.~)}
@d set_page_int=82 {specify state info ( \.{\\deadcycles},
  \.{\\insertpenalties} )}
@d set_box_dimen=83 {change dimension of box ( \.{\\wd}, \.{\\ht}, \.{\\dp} )}
@d set_shape=84 {specify fancy paragraph shape ( \.{\\parshape} )}
@d def_code=85 {define a character code ( \.{\\catcode}, etc.~)}
@d def_family=86 {declare math fonts ( \.{\\textfont}, etc.~)}
@d set_font=87 {set current font ( font identifiers )}
@d def_font=88 {define a font file ( \.{\\font} )}
@d register=89 {internal register ( \.{\\count}, \.{\\dimen}, etc.~)}
@d max_internal=89 {the largest code that can follow \.{\\the}}
@d advance=90 {advance a register or parameter ( \.{\\advance} )}
@d multiply=91 {multiply a register or parameter ( \.{\\multiply} )}
@d divide=92 {divide a register or parameter ( \.{\\divide} )}
@d prefix=93 {qualify a definition ( \.{\\global}, \.{\\long}, \.{\\outer} )}
@d let=94 {assign a command code ( \.{\\let}, \.{\\futurelet} )}
@d shorthand_def=95 {code definition ( \.{\\chardef}, \.{\\countdef}, etc.~)}
@d read_to_cs=96 {read into a control sequence ( \.{\\read} )}
@d def=97 {macro definition ( \.{\\def}, \.{\\gdef}, \.{\\xdef}, \.{\\edef} )}
@d set_box=98 {set a box ( \.{\\setbox} )}
@d hyph_data=99 {hyphenation data ( \.{\\hyphenation}, \.{\\patterns} )}
@d set_interaction=100 {define level of interaction ( \.{\\batchmode}, etc.~)}
@d max_command=100 {the largest command code seen at |big_switch|}

@ The remaining command codes are extra special, since they cannot get through
\TeX's scanner to the main control routine. They have been given values higher
than |max_command| so that their special nature is easily discernible.
The ``expandable'' commands come first.

@d undefined_cs=max_command+1 {initial state of most |eq_type| fields}
@d expand_after=max_command+2 {special expansion ( \.{\\expandafter} )}
@d no_expand=max_command+3 {special nonexpansion ( \.{\\noexpand} )}
@d input=max_command+4 {input a source file ( \.{\\input}, \.{\\endinput} )}
@d if_test=max_command+5 {conditional text ( \.{\\if}, \.{\\ifcase}, etc.~)}
@d fi_or_else=max_command+6 {delimiters for conditionals ( \.{\\else}, etc.~)}
@d cs_name=max_command+7 {make a control sequence from tokens ( \.{\\csname} )}
@d convert=max_command+8 {convert to text ( \.{\\number}, \.{\\string}, etc.~)}
@d the=max_command+9 {expand an internal quantity ( \.{\\the} )}
@d top_bot_mark=max_command+10 {inserted mark ( \.{\\topmark}, etc.~)}
@d call=max_command+11 {non-long, non-outer control sequence}
@d long_call=max_command+12 {long, non-outer control sequence}
@d outer_call=max_command+13 {non-long, outer control sequence}
@d long_outer_call=max_command+14 {long, outer control sequence}
@d end_template=max_command+15 {end of an alignment template}
@d dont_expand=max_command+16 {the following token was marked by \.{\\noexpand}}
@d glue_ref=max_command+17 {the equivalent points to a glue specification}
@d shape_ref=max_command+18 {the equivalent points to a parshape specification}
@d box_ref=max_command+19 {the equivalent points to a box node, or is |null|}
@d data=max_command+20 {the equivalent is simply a halfword number}

@* \[16] The semantic nest.
\TeX\ is typically in the midst of building many lists at once. For example,
when a math formula is being processed, \TeX\ is in math mode and
working on an mlist; this formula has temporarily interrupted \TeX\ from
being in horizontal mode and building the hlist of a paragraph; and this
paragraph has temporarily interrupted \TeX\ from being in vertical mode
and building the vlist for the next page of a document. Similarly, when a
\.{\\vbox} occurs inside of an \.{\\hbox}, \TeX\ is temporarily
interrupted from working in restricted horizontal mode, and it enters
internal vertical mode.  The ``semantic nest'' is a stack that
keeps track of what lists and modes are currently suspended.

At each level of processing we are in one of six modes:

\yskip\hang|vmode| stands for vertical mode (the page builder);

\hang|hmode| stands for horizontal mode (the paragraph builder);

\hang|mmode| stands for displayed formula mode;

\hang|-vmode| stands for internal vertical mode (e.g., in a \.{\\vbox});

\hang|-hmode| stands for restricted horizontal mode (e.g., in an \.{\\hbox});

\hang|-mmode| stands for math formula mode (not displayed).

\yskip\noindent The mode is temporarily set to zero while processing \.{\\write}
texts in the |ship_out| routine.

Numeric values are assigned to |vmode|, |hmode|, and |mmode| so that
\TeX's ``big semantic switch'' can select the appropriate thing to
do by computing the value |abs(mode)+cur_cmd|, where |mode| is the current
mode and |cur_cmd| is the current command code.

@d vmode=1 {vertical mode}
@d hmode=vmode+max_command+1 {horizontal mode}
@d mmode=hmode+max_command+1 {math mode}

@p procedure print_mode(@!m:integer); {prints the mode represented by |m|}
begin if m>0 then
  case m div (max_command+1) of
  0:print("vertical");
  1:print("horizontal");
  2:print("display math");
  end
else if m=0 then print("no")
else  case (-m) div (max_command+1) of
  0:print("internal vertical");
  1:print("restricted horizontal");
  2:print("math");
  end;
print(" mode");
end;

@ The state of affairs at any semantic level can be represented by
five values:

\yskip\hang|mode| is the number representing the semantic mode, as
just explained.

\yskip\hang|head| is a |pointer| to a list head for the list being built;
|link(head)| therefore points to the first element of the list, or
to |null| if the list is empty.

\yskip\hang|tail| is a |pointer| to the final node of the list being
built; thus, |tail=head| if and only if the list is empty.

\yskip\hang|prev_graf| is the number of lines of the current paragraph that
have already been put into the present vertical list.

\yskip\hang|aux| is an auxiliary |memory_word| that gives further information
that is needed to characterize the situation.

\yskip\noindent
In vertical mode, |aux| is also known as |prev_depth|; it is the scaled
value representing the depth of the previous box, for use in baseline
calculations, or it is |<=-1000|pt if the next box on the vertical list is to
be exempt from baseline calculations.  In horizontal mode, |aux| is also
known as |space_factor| and |clang|; it holds the current space factor used in
spacing calculations, and the current language used for hyphenation.
(The value of |clang| is undefined in restricted horizontal mode.)
In math mode, |aux| is also known as |incompleat_noad|; if
not |null|, it points to a record that represents the numerator of a
generalized fraction for which the denominator is currently being formed
in the current list.

There is also a sixth quantity, |mode_line|, which correlates
the semantic nest with the user's input; |mode_line| contains the source
line number at which the current level of nesting was entered. The negative
of this line number is the |mode_line| at the level of the
user's output routine.

In horizontal mode, the |prev_graf| field is used for initial language data.

The semantic nest is an array called |nest| that holds the |mode|, |head|,
|tail|, |prev_graf|, |aux|, and |mode_line| values for all semantic levels
below the currently active one. Information about the currently active
level is kept in the global quantities |mode|, |head|, |tail|, |prev_graf|,
|aux|, and |mode_line|, which live in a \PASCAL\ record that is ready to
be pushed onto |nest| if necessary.

@d ignore_depth==-65536000 {|prev_depth| value that is ignored}

@<Types...@>=
@!list_state_record=record@!mode_field:-mmode..mmode;@+
  @!head_field,@!tail_field: pointer;
  @!pg_field,@!ml_field: integer;@+
  @!aux_field: memory_word;
  end;

@ @d mode==cur_list.mode_field {current mode}
@d head==cur_list.head_field {header node of current list}
@d tail==cur_list.tail_field {final node on current list}
@d prev_graf==cur_list.pg_field {number of paragraph lines accumulated}
@d aux==cur_list.aux_field {auxiliary data about the current list}
@d prev_depth==aux.sc {the name of |aux| in vertical mode}
@d space_factor==aux.hh.lh {part of |aux| in horizontal mode}
@d clang==aux.hh.rh {the other part of |aux| in horizontal mode}
@d incompleat_noad==aux.int {the name of |aux| in math mode}
@d mode_line==cur_list.ml_field {source file line number at beginning of list}

@<Glob...@>=
@!nest:array[0..nest_size] of list_state_record;
@!nest_ptr:0..nest_size; {first unused location of |nest|}
@!max_nest_stack:0..nest_size; {maximum of |nest_ptr| when pushing}
@!cur_list:list_state_record; {the ``top'' semantic state}
@!shown_mode:-mmode..mmode; {most recent mode shown by \.{\\tracingcommands}}

@ Here is a common way to make the current list grow:

@d tail_append(#)==begin link(tail):=#; tail:=link(tail);
  end

@ We will see later that the vertical list at the bottom semantic level is split
into two parts; the ``current page'' runs from |page_head| to |page_tail|,
and the ``contribution list'' runs from |contrib_head| to |tail| of
semantic level zero. The idea is that contributions are first formed in
vertical mode, then ``contributed'' to the current page (during which time
the page-breaking decisions are made). For now, we don't need to know
any more details about the page-building process.

@<Set init...@>=
nest_ptr:=0; max_nest_stack:=0;
mode:=vmode; head:=contrib_head; tail:=contrib_head;
prev_depth:=ignore_depth; mode_line:=0;
prev_graf:=0; shown_mode:=0;
@<Start a new current page@>;

@ When \TeX's work on one level is interrupted, the state is saved by
calling |push_nest|. This routine changes |head| and |tail| so that
a new (empty) list is begun; it does not change |mode| or |aux|.

@p procedure push_nest; {enter a new semantic level, save the old}
begin if nest_ptr>max_nest_stack then
  begin max_nest_stack:=nest_ptr;
  if nest_ptr=nest_size then overflow("semantic nest size",nest_size);
@:TeX capacity exceeded semantic nest size}{\quad semantic nest size@>
  end;
nest[nest_ptr]:=cur_list; {stack the record}
incr(nest_ptr); head:=get_avail; tail:=head; prev_graf:=0; mode_line:=line;
end;

@ Conversely, when \TeX\ is finished on the current level, the former
state is restored by calling |pop_nest|. This routine will never be
called at the lowest semantic level, nor will it be called unless |head|
is a node that should be returned to free memory.

@p procedure pop_nest; {leave a semantic level, re-enter the old}
begin free_avail(head); decr(nest_ptr); cur_list:=nest[nest_ptr];
end;

@ Here is a procedure that displays what \TeX\ is working on, at all levels.

@p procedure@?print_totals; forward;@t\2@>
procedure show_activities;
var p:0..nest_size; {index into |nest|}
@!m:-mmode..mmode; {mode}
@!a:memory_word; {auxiliary}
@!q,@!r:pointer; {for showing the current page}
@!t:integer; {ditto}
begin nest[nest_ptr]:=cur_list; {put the top level into the array}
print_nl(""); print_ln;
for p:=nest_ptr downto 0 do
  begin m:=nest[p].mode_field; a:=nest[p].aux_field;
  print_nl("### "); print_mode(m);
  print(" entered at line "); print_int(abs(nest[p].ml_field));
  if m=hmode then if nest[p].pg_field <> @'40600000 then
    begin print(" (language"); print_int(nest[p].pg_field mod @'200000);
    print(":hyphenmin"); print_int(nest[p].pg_field div @'20000000);
    print_char(","); print_int((nest[p].pg_field div @'200000) mod @'100);
    print_char(")");
    end;
  if nest[p].ml_field<0 then print(" (\output routine)");
  if p=0 then
    begin @<Show the status of the current page@>;
    if link(contrib_head)<>null then
      print_nl("### recent contributions:");
    end;
  show_box(link(nest[p].head_field));
  @<Show the auxiliary field, |a|@>;
  end;
end;

@ @<Show the auxiliary...@>=
case abs(m) div (max_command+1) of
0: begin print_nl("prevdepth ");
  if a.sc<=ignore_depth then print("ignored")
  else print_scaled(a.sc);
  if nest[p].pg_field<>0 then
    begin print(", prevgraf ");
    print_int(nest[p].pg_field); print(" line");
    if nest[p].pg_field<>1 then print_char("s");
    end;
  end;
1: begin print_nl("spacefactor "); print_int(a.hh.lh);
  if m>0 then@+ if a.hh.rh>0 then
    begin print(", current language "); print_int(a.hh.rh);@+
    end;
  end;
2: if a.int<>null then
  begin print("this will be denominator of:"); show_box(a.int);@+
  end;
end {there are no other cases}

@* \[17] The table of equivalents.
Now that we have studied the data structures for \TeX's semantic routines,
we ought to consider the data structures used by its syntactic routines. In
other words, our next concern will be
the tables that \TeX\ looks at when it is scanning
what the user has written.

The biggest and most important such table is called |eqtb|. It holds the
current ``equivalents'' of things; i.e., it explains what things mean
or what their current values are, for all quantities that are subject to
the nesting structure provided by \TeX's grouping mechanism. There are six
parts to |eqtb|:

\yskip\hangg 1) |eqtb[active_base..(hash_base-1)]| holds the current
equivalents of single-character control sequences.

\yskip\hangg 2) |eqtb[hash_base..(glue_base-1)]| holds the current
equivalents of multiletter control sequences.

\yskip\hangg 3) |eqtb[glue_base..(local_base-1)]| holds the current
equivalents of glue parameters like the current baselineskip.

\yskip\hangg 4) |eqtb[local_base..(int_base-1)]| holds the current
equivalents of local halfword quantities like the current box registers,
the current ``catcodes,'' the current font, and a pointer to the current
paragraph shape.

\yskip\hangg 5) |eqtb[int_base..(dimen_base-1)]| holds the current
equivalents of fullword integer parameters like the current hyphenation
penalty.

\yskip\hangg 6) |eqtb[dimen_base..eqtb_size]| holds the current equivalents
of fullword dimension parameters like the current hsize or amount of
hanging indentation.

\yskip\noindent Note that, for example, the current amount of
baselineskip glue is determined by the setting of a particular location
in region~3 of |eqtb|, while the current meaning of the control sequence
`\.{\\baselineskip}' (which might have been changed by \.{\\def} or
\.{\\let}) appears in region~2.

@ Each entry in |eqtb| is a |memory_word|. Most of these words are of type
|two_halves|, and subdivided into three fields:

\yskip\hangg 1) The |eq_level| (a quarterword) is the level of grouping at
which this equivalent was defined. If the level is |level_zero|, the
equivalent has never been defined; |level_one| refers to the outer level
(outside of all groups), and this level is also used for global
definitions that never go away. Higher levels are for equivalents that
will disappear at the end of their group.  @^global definitions@>

\yskip\hangg 2) The |eq_type| (another quarterword) specifies what kind of
entry this is. There are many types, since each \TeX\ primitive like
\.{\\hbox}, \.{\\def}, etc., has its own special code. The list of
command codes above includes all possible settings of the |eq_type| field.

\yskip\hangg 3) The |equiv| (a halfword) is the current equivalent value.
This may be a font number, a pointer into |mem|, or a variety of other
things.

@d eq_level_field(#)==#.hh.b1
@d eq_type_field(#)==#.hh.b0
@d equiv_field(#)==#.hh.rh
@d eq_level(#)==eq_level_field(eqtb[#]) {level of definition}
@d eq_type(#)==eq_type_field(eqtb[#]) {command code for equivalent}
@d equiv(#)==equiv_field(eqtb[#]) {equivalent value}
@d level_zero=min_quarterword {level for undefined quantities}
@d level_one=level_zero+1 {outermost level for defined quantities}

@ Many locations in |eqtb| have symbolic names. The purpose of the next
paragraphs is to define these names, and to set up the initial values of the
equivalents.

In the first region we have 256 equivalents for ``active characters'' that
act as control sequences, followed by 256 equivalents for single-character
control sequences.

Then comes region~2, which corresponds to the hash table that we will
define later.  The maximum address in this region is used for a dummy
control sequence that is perpetually undefined. There also are several
locations for control sequences that are perpetually defined
(since they are used in error recovery).

@d active_base=1 {beginning of region 1, for active character equivalents}
@d single_base=active_base+256 {equivalents of one-character control sequences}
@d null_cs=single_base+256 {equivalent of \.{\\csname\\endcsname}}
@d hash_base=null_cs+1 {beginning of region 2, for the hash table}
@d frozen_control_sequence=hash_base+hash_size {for error recovery}
@d frozen_protection=frozen_control_sequence {inaccessible but definable}
@d frozen_cr=frozen_control_sequence+1 {permanent `\.{\\cr}'}
@d frozen_end_group=frozen_control_sequence+2 {permanent `\.{\\endgroup}'}
@d frozen_right=frozen_control_sequence+3 {permanent `\.{\\right}'}
@d frozen_fi=frozen_control_sequence+4 {permanent `\.{\\fi}'}
@d frozen_end_template=frozen_control_sequence+5 {permanent `\.{\\endtemplate}'}
@d frozen_endv=frozen_control_sequence+6 {second permanent `\.{\\endtemplate}'}
@d frozen_relax=frozen_control_sequence+7 {permanent `\.{\\relax}'}
@d end_write=frozen_control_sequence+8 {permanent `\.{\\endwrite}'}
@d frozen_dont_expand=frozen_control_sequence+9
  {permanent `\.{\\notexpanded:}'}
@d frozen_null_font=frozen_control_sequence+10
  {permanent `\.{\\nullfont}'}
@d font_id_base=frozen_null_font-font_base
  {begins table of 257 permanent font identifiers}
@d undefined_control_sequence=frozen_null_font+257 {dummy location}
@d glue_base=undefined_control_sequence+1 {beginning of region 3}

@<Initialize table entries...@>=
eq_type(undefined_control_sequence):=undefined_cs;
equiv(undefined_control_sequence):=null;
eq_level(undefined_control_sequence):=level_zero;
for k:=active_base to undefined_control_sequence-1 do
  eqtb[k]:=eqtb[undefined_control_sequence];

@ Here is a routine that displays the current meaning of an |eqtb| entry
in region 1 or~2. (Similar routines for the other regions will appear
below.)

@<Show equivalent |n|, in region 1 or 2@>=
begin sprint_cs(n); print_char("="); print_cmd_chr(eq_type(n),equiv(n));
if eq_type(n)>=call then
  begin print_char(":"); show_token_list(link(equiv(n)),null,32);
  end;
end

@ Region 3 of |eqtb| contains the 256 \.{\\skip} registers, as well as the
glue parameters defined here. It is important that the ``muskip''
parameters have larger numbers than the others.

@d line_skip_code=0 {interline glue if |baseline_skip| is infeasible}
@d baseline_skip_code=1 {desired glue between baselines}
@d par_skip_code=2 {extra glue just above a paragraph}
@d above_display_skip_code=3 {extra glue just above displayed math}
@d below_display_skip_code=4 {extra glue just below displayed math}
@d above_display_short_skip_code=5
  {glue above displayed math following short lines}
@d below_display_short_skip_code=6
  {glue below displayed math following short lines}
@d left_skip_code=7 {glue at left of justified lines}
@d right_skip_code=8 {glue at right of justified lines}
@d top_skip_code=9 {glue at top of main pages}
@d split_top_skip_code=10 {glue at top of split pages}
@d tab_skip_code=11 {glue between aligned entries}
@d space_skip_code=12 {glue between words (if not |zero_glue|)}
@d xspace_skip_code=13 {glue after sentences (if not |zero_glue|)}
@d par_fill_skip_code=14 {glue on last line of paragraph}
@d thin_mu_skip_code=15 {thin space in math formula}
@d med_mu_skip_code=16 {medium space in math formula}
@d thick_mu_skip_code=17 {thick space in math formula}
@d glue_pars=18 {total number of glue parameters}
@d skip_base=glue_base+glue_pars {table of 256 ``skip'' registers}
@d mu_skip_base=skip_base+256 {table of 256 ``muskip'' registers}
@d local_base=mu_skip_base+256 {beginning of region 4}
@#
@d skip(#)==equiv(skip_base+#) {|mem| location of glue specification}
@d mu_skip(#)==equiv(mu_skip_base+#) {|mem| location of math glue spec}
@d glue_par(#)==equiv(glue_base+#) {|mem| location of glue specification}
@d line_skip==glue_par(line_skip_code)
@d baseline_skip==glue_par(baseline_skip_code)
@d par_skip==glue_par(par_skip_code)
@d above_display_skip==glue_par(above_display_skip_code)
@d below_display_skip==glue_par(below_display_skip_code)
@d above_display_short_skip==glue_par(above_display_short_skip_code)
@d below_display_short_skip==glue_par(below_display_short_skip_code)
@d left_skip==glue_par(left_skip_code)
@d right_skip==glue_par(right_skip_code)
@d top_skip==glue_par(top_skip_code)
@d split_top_skip==glue_par(split_top_skip_code)
@d tab_skip==glue_par(tab_skip_code)
@d space_skip==glue_par(space_skip_code)
@d xspace_skip==glue_par(xspace_skip_code)
@d par_fill_skip==glue_par(par_fill_skip_code)
@d thin_mu_skip==glue_par(thin_mu_skip_code)
@d med_mu_skip==glue_par(med_mu_skip_code)
@d thick_mu_skip==glue_par(thick_mu_skip_code)

@<Current |mem| equivalent of glue parameter number |n|@>=glue_par(n)

@ Sometimes we need to convert \TeX's internal code numbers into symbolic
form. The |print_skip_param| routine gives the symbolic name of a glue
parameter.

@<Declare the procedure called |print_skip_param|@>=
procedure print_skip_param(@!n:integer);
begin case n of
line_skip_code: print_esc("lineskip");
baseline_skip_code: print_esc("baselineskip");
par_skip_code: print_esc("parskip");
above_display_skip_code: print_esc("abovedisplayskip");
below_display_skip_code: print_esc("belowdisplayskip");
above_display_short_skip_code: print_esc("abovedisplayshortskip");
below_display_short_skip_code: print_esc("belowdisplayshortskip");
left_skip_code: print_esc("leftskip");
right_skip_code: print_esc("rightskip");
top_skip_code: print_esc("topskip");
split_top_skip_code: print_esc("splittopskip");
tab_skip_code: print_esc("tabskip");
space_skip_code: print_esc("spaceskip");
xspace_skip_code: print_esc("xspaceskip");
par_fill_skip_code: print_esc("parfillskip");
thin_mu_skip_code: print_esc("thinmuskip");
med_mu_skip_code: print_esc("medmuskip");
thick_mu_skip_code: print_esc("thickmuskip");
othercases print("[unknown glue parameter!]")
endcases;
end;

@ The symbolic names for glue parameters are put into \TeX's hash table
by using the routine called |primitive|, defined below. Let us enter them
now, so that we don't have to list all those parameter names anywhere else.

@<Put each of \TeX's primitives into the hash table@>=
primitive("lineskip",assign_glue,glue_base+line_skip_code);@/
@!@:line_skip_}{\.{\\lineskip} primitive@>
primitive("baselineskip",assign_glue,glue_base+baseline_skip_code);@/
@!@:baseline_skip_}{\.{\\baselineskip} primitive@>
primitive("parskip",assign_glue,glue_base+par_skip_code);@/
@!@:par_skip_}{\.{\\parskip} primitive@>
primitive("abovedisplayskip",assign_glue,glue_base+above_display_skip_code);@/
@!@:above_display_skip_}{\.{\\abovedisplayskip} primitive@>
primitive("belowdisplayskip",assign_glue,glue_base+below_display_skip_code);@/
@!@:below_display_skip_}{\.{\\belowdisplayskip} primitive@>
primitive("abovedisplayshortskip",
  assign_glue,glue_base+above_display_short_skip_code);@/
@!@:above_display_short_skip_}{\.{\\abovedisplayshortskip} primitive@>
primitive("belowdisplayshortskip",
  assign_glue,glue_base+below_display_short_skip_code);@/
@!@:below_display_short_skip_}{\.{\\belowdisplayshortskip} primitive@>
primitive("leftskip",assign_glue,glue_base+left_skip_code);@/
@!@:left_skip_}{\.{\\leftskip} primitive@>
primitive("rightskip",assign_glue,glue_base+right_skip_code);@/
@!@:right_skip_}{\.{\\rightskip} primitive@>
primitive("topskip",assign_glue,glue_base+top_skip_code);@/
@!@:top_skip_}{\.{\\topskip} primitive@>
primitive("splittopskip",assign_glue,glue_base+split_top_skip_code);@/
@!@:split_top_skip_}{\.{\\splittopskip} primitive@>
primitive("tabskip",assign_glue,glue_base+tab_skip_code);@/
@!@:tab_skip_}{\.{\\tabskip} primitive@>
primitive("spaceskip",assign_glue,glue_base+space_skip_code);@/
@!@:space_skip_}{\.{\\spaceskip} primitive@>
primitive("xspaceskip",assign_glue,glue_base+xspace_skip_code);@/
@!@:xspace_skip_}{\.{\\xspaceskip} primitive@>
primitive("parfillskip",assign_glue,glue_base+par_fill_skip_code);@/
@!@:par_fill_skip_}{\.{\\parfillskip} primitive@>
primitive("thinmuskip",assign_mu_glue,glue_base+thin_mu_skip_code);@/
@!@:thin_mu_skip_}{\.{\\thinmuskip} primitive@>
primitive("medmuskip",assign_mu_glue,glue_base+med_mu_skip_code);@/
@!@:med_mu_skip_}{\.{\\medmuskip} primitive@>
primitive("thickmuskip",assign_mu_glue,glue_base+thick_mu_skip_code);@/
@!@:thick_mu_skip_}{\.{\\thickmuskip} primitive@>

@ @<Cases of |print_cmd_chr| for symbolic printing of primitives@>=
assign_glue,assign_mu_glue: if chr_code<skip_base then
    print_skip_param(chr_code-glue_base)
  else if chr_code<mu_skip_base then
    begin print_esc("skip"); print_int(chr_code-skip_base);
    end
  else  begin print_esc("muskip"); print_int(chr_code-mu_skip_base);
    end;

@ All glue parameters and registers are initially `\.{0pt plus0pt minus0pt}'.

@<Initialize table entries...@>=
equiv(glue_base):=zero_glue; eq_level(glue_base):=level_one;
eq_type(glue_base):=glue_ref;
for k:=glue_base+1 to local_base-1 do eqtb[k]:=eqtb[glue_base];
glue_ref_count(zero_glue):=glue_ref_count(zero_glue)+local_base-glue_base;

@ @<Show equivalent |n|, in region 3@>=
if n<skip_base then
  begin print_skip_param(n-glue_base); print_char("=");
  if n<glue_base+thin_mu_skip_code then print_spec(equiv(n),"pt")
  else print_spec(equiv(n),"mu");
  end
else if n<mu_skip_base then
  begin print_esc("skip"); print_int(n-skip_base); print_char("=");
  print_spec(equiv(n),"pt");
  end
else  begin print_esc("muskip"); print_int(n-mu_skip_base); print_char("=");
  print_spec(equiv(n),"mu");
  end

@ Region 4 of |eqtb| contains the local quantities defined here. The
bulk of this region is taken up by five tables that are indexed by eight-bit
characters; these tables are important to both the syntactic and semantic
portions of \TeX. There are also a bunch of special things like font and
token parameters, as well as the tables of \.{\\toks} and \.{\\box}
registers.

@d par_shape_loc=local_base {specifies paragraph shape}
@d output_routine_loc=local_base+1 {points to token list for \.{\\output}}
@d every_par_loc=local_base+2 {points to token list for \.{\\everypar}}
@d every_math_loc=local_base+3 {points to token list for \.{\\everymath}}
@d every_display_loc=local_base+4 {points to token list for \.{\\everydisplay}}
@d every_hbox_loc=local_base+5 {points to token list for \.{\\everyhbox}}
@d every_vbox_loc=local_base+6 {points to token list for \.{\\everyvbox}}
@d every_job_loc=local_base+7 {points to token list for \.{\\everyjob}}
@d every_cr_loc=local_base+8 {points to token list for \.{\\everycr}}
@d err_help_loc=local_base+9 {points to token list for \.{\\errhelp}}
@d toks_base=local_base+10 {table of 256 token list registers}
@d box_base=toks_base+256 {table of 256 box registers}
@d cur_font_loc=box_base+256 {internal font number outside math mode}
@d math_font_base=cur_font_loc+1 {table of 48 math font numbers}
@d cat_code_base=math_font_base+48
  {table of 256 command codes (the ``catcodes'')}
@d lc_code_base=cat_code_base+256 {table of 256 lowercase mappings}
@d uc_code_base=lc_code_base+256 {table of 256 uppercase mappings}
@d sf_code_base=uc_code_base+256 {table of 256 spacefactor mappings}
@d math_code_base=sf_code_base+256 {table of 256 math mode mappings}
@d int_base=math_code_base+256 {beginning of region 5}
@#
@d par_shape_ptr==equiv(par_shape_loc)
@d output_routine==equiv(output_routine_loc)
@d every_par==equiv(every_par_loc)
@d every_math==equiv(every_math_loc)
@d every_display==equiv(every_display_loc)
@d every_hbox==equiv(every_hbox_loc)
@d every_vbox==equiv(every_vbox_loc)
@d every_job==equiv(every_job_loc)
@d every_cr==equiv(every_cr_loc)
@d err_help==equiv(err_help_loc)
@d toks(#)==equiv(toks_base+#)
@d box(#)==equiv(box_base+#)
@d cur_font==equiv(cur_font_loc)
@d fam_fnt(#)==equiv(math_font_base+#)
@d cat_code(#)==equiv(cat_code_base+#)
@d lc_code(#)==equiv(lc_code_base+#)
@d uc_code(#)==equiv(uc_code_base+#)
@d sf_code(#)==equiv(sf_code_base+#)
@d math_code(#)==equiv(math_code_base+#)
  {Note: |math_code(c)| is the true math code plus |min_halfword|}

@<Put each...@>=
primitive("output",assign_toks,output_routine_loc);
@!@:output_}{\.{\\output} primitive@>
primitive("everypar",assign_toks,every_par_loc);
@!@:every_par_}{\.{\\everypar} primitive@>
primitive("everymath",assign_toks,every_math_loc);
@!@:every_math_}{\.{\\everymath} primitive@>
primitive("everydisplay",assign_toks,every_display_loc);
@!@:every_display_}{\.{\\everydisplay} primitive@>
primitive("everyhbox",assign_toks,every_hbox_loc);
@!@:every_hbox_}{\.{\\everyhbox} primitive@>
primitive("everyvbox",assign_toks,every_vbox_loc);
@!@:every_vbox_}{\.{\\everyvbox} primitive@>
primitive("everyjob",assign_toks,every_job_loc);
@!@:every_job_}{\.{\\everyjob} primitive@>
primitive("everycr",assign_toks,every_cr_loc);
@!@:every_cr_}{\.{\\everycr} primitive@>
primitive("errhelp",assign_toks,err_help_loc);
@!@:err_help_}{\.{\\errhelp} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
assign_toks: if chr_code>=toks_base then
  begin print_esc("toks"); print_int(chr_code-toks_base);
  end
else  case chr_code of
  output_routine_loc: print_esc("output");
  every_par_loc: print_esc("everypar");
  every_math_loc: print_esc("everymath");
  every_display_loc: print_esc("everydisplay");
  every_hbox_loc: print_esc("everyhbox");
  every_vbox_loc: print_esc("everyvbox");
  every_job_loc: print_esc("everyjob");
  every_cr_loc: print_esc("everycr");
  othercases print_esc("errhelp")
  endcases;

@ We initialize most things to null or undefined values. An undefined font
is represented by the internal code |font_base|.

However, the character code tables are given initial values based on the
conventional interpretation of ASCII code. These initial values should
not be changed when \TeX\ is adapted for use with non-English languages;
all changes to the initialization conventions should be made in format
packages, not in \TeX\ itself, so that global interchange of formats is
possible.

@d null_font==font_base
@d var_code==@'70000 {math code meaning ``use the current family''}

@<Initialize table entries...@>=
par_shape_ptr:=null; eq_type(par_shape_loc):=shape_ref;
eq_level(par_shape_loc):=level_one;@/
for k:=output_routine_loc to toks_base+255 do
  eqtb[k]:=eqtb[undefined_control_sequence];
box(0):=null; eq_type(box_base):=box_ref; eq_level(box_base):=level_one;
for k:=box_base+1 to box_base+255 do eqtb[k]:=eqtb[box_base];
cur_font:=null_font; eq_type(cur_font_loc):=data;
eq_level(cur_font_loc):=level_one;@/
for k:=math_font_base to math_font_base+47 do eqtb[k]:=eqtb[cur_font_loc];
equiv(cat_code_base):=0; eq_type(cat_code_base):=data;
eq_level(cat_code_base):=level_one;@/
for k:=cat_code_base+1 to int_base-1 do eqtb[k]:=eqtb[cat_code_base];
for k:=0 to 255 do
  begin cat_code(k):=other_char; math_code(k):=hi(k); sf_code(k):=1000;
  end;
cat_code(carriage_return):=car_ret; cat_code(" "):=spacer;
cat_code("\"):=escape; cat_code("%"):=comment;
cat_code(invalid_code):=invalid_char; cat_code(null_code):=ignore;
for k:="0" to "9" do math_code(k):=hi(k+var_code);
for k:="A" to "Z" do
  begin cat_code(k):=letter; cat_code(k+"a"-"A"):=letter;@/
  math_code(k):=hi(k+var_code+@"100);
  math_code(k+"a"-"A"):=hi(k+"a"-"A"+var_code+@"100);@/
  lc_code(k):=k+"a"-"A"; lc_code(k+"a"-"A"):=k+"a"-"A";@/
  uc_code(k):=k; uc_code(k+"a"-"A"):=k;@/
  sf_code(k):=999;
  end;

@ @<Show equivalent |n|, in region 4@>=
if n=par_shape_loc then
  begin print_esc("parshape"); print_char("=");
  if par_shape_ptr=null then print_char("0")
  else print_int(info(par_shape_ptr));
  end
else if n<toks_base then
  begin print_cmd_chr(assign_toks,n); print_char("=");
  if equiv(n)<>null then show_token_list(link(equiv(n)),null,32);
  end
else if n<box_base then
  begin print_esc("toks"); print_int(n-toks_base); print_char("=");
  if equiv(n)<>null then show_token_list(link(equiv(n)),null,32);
  end
else if n<cur_font_loc then
  begin print_esc("box"); print_int(n-box_base); print_char("=");
  if equiv(n)=null then print("void")
  else  begin depth_threshold:=0; breadth_max:=1; show_node_list(equiv(n));
    end;
  end
else if n<cat_code_base then @<Show the font identifier in |eqtb[n]|@>
else @<Show the halfword code in |eqtb[n]|@>

@ @<Show the font identifier in |eqtb[n]|@>=
begin if n=cur_font_loc then print("current font")
else if n<math_font_base+16 then
  begin print_esc("textfont"); print_int(n-math_font_base);
  end
else if n<math_font_base+32 then
  begin print_esc("scriptfont"); print_int(n-math_font_base-16);
  end
else  begin print_esc("scriptscriptfont"); print_int(n-math_font_base-32);
  end;
print_char("=");@/
print_esc(hash[font_id_base+equiv(n)].rh);
  {that's |font_id_text(equiv(n))|}
end

@ @<Show the halfword code in |eqtb[n]|@>=
if n<math_code_base then
  begin if n<lc_code_base then
    begin print_esc("catcode"); print_int(n-cat_code_base);
    end
  else if n<uc_code_base then
    begin print_esc("lccode"); print_int(n-lc_code_base);
    end
  else if n<sf_code_base then
    begin print_esc("uccode"); print_int(n-uc_code_base);
    end
  else  begin print_esc("sfcode"); print_int(n-sf_code_base);
    end;
  print_char("="); print_int(equiv(n));
  end
else  begin print_esc("mathcode"); print_int(n-math_code_base);
  print_char("="); print_int(ho(equiv(n)));
  end

@ Region 5 of |eqtb| contains the integer parameters and registers defined
here, as well as the |del_code| table. The latter table differs from the
|cat_code..math_code| tables that precede it, since delimiter codes are
fullword integers while the other kinds of codes occupy at most a
halfword. This is what makes region~5 different from region~4. We will
store the |eq_level| information in an auxiliary array of quarterwords
that will be defined later.

@d pretolerance_code=0 {badness tolerance before hyphenation}
@d tolerance_code=1 {badness tolerance after hyphenation}
@d line_penalty_code=2 {added to the badness of every line}
@d hyphen_penalty_code=3 {penalty for break after discretionary hyphen}
@d ex_hyphen_penalty_code=4 {penalty for break after explicit hyphen}
@d club_penalty_code=5 {penalty for creating a club line}
@d widow_penalty_code=6 {penalty for creating a widow line}
@d display_widow_penalty_code=7 {ditto, just before a display}
@d broken_penalty_code=8 {penalty for breaking a page at a broken line}
@d bin_op_penalty_code=9 {penalty for breaking after a binary operation}
@d rel_penalty_code=10 {penalty for breaking after a relation}
@d pre_display_penalty_code=11
  {penalty for breaking just before a displayed formula}
@d post_display_penalty_code=12
  {penalty for breaking just after a displayed formula}
@d inter_line_penalty_code=13 {additional penalty between lines}
@d double_hyphen_demerits_code=14 {demerits for double hyphen break}
@d final_hyphen_demerits_code=15 {demerits for final hyphen break}
@d adj_demerits_code=16 {demerits for adjacent incompatible lines}
@d mag_code=17 {magnification ratio}
@d delimiter_factor_code=18 {ratio for variable-size delimiters}
@d looseness_code=19 {change in number of lines for a paragraph}
@d time_code=20 {current time of day}
@d day_code=21 {current day of the month}
@d month_code=22 {current month of the year}
@d year_code=23 {current year of our Lord}
@d show_box_breadth_code=24 {nodes per level in |show_box|}
@d show_box_depth_code=25 {maximum level in |show_box|}
@d hbadness_code=26 {hboxes exceeding this badness will be shown by |hpack|}
@d vbadness_code=27 {vboxes exceeding this badness will be shown by |vpack|}
@d pausing_code=28 {pause after each line is read from a file}
@d tracing_online_code=29 {show diagnostic output on terminal}
@d tracing_macros_code=30 {show macros as they are being expanded}
@d tracing_stats_code=31 {show memory usage if \TeX\ knows it}
@d tracing_paragraphs_code=32 {show line-break calculations}
@d tracing_pages_code=33 {show page-break calculations}
@d tracing_output_code=34 {show boxes when they are shipped out}
@d tracing_lost_chars_code=35 {show characters that aren't in the font}
@d tracing_commands_code=36 {show command codes at |big_switch|}
@d tracing_restores_code=37 {show equivalents when they are restored}
@d uc_hyph_code=38 {hyphenate words beginning with a capital letter}
@d output_penalty_code=39 {penalty found at current page break}
@d max_dead_cycles_code=40 {bound on consecutive dead cycles of output}
@d hang_after_code=41 {hanging indentation changes after this many lines}
@d floating_penalty_code=42 {penalty for insertions heldover after a split}
@d global_defs_code=43 {override \.{\\global} specifications}
@d cur_fam_code=44 {current family}
@d escape_char_code=45 {escape character for token output}
@d default_hyphen_char_code=46 {value of \.{\\hyphenchar} when a font is loaded}
@d default_skew_char_code=47 {value of \.{\\skewchar} when a font is loaded}
@d end_line_char_code=48 {character placed at the right end of the buffer}
@d new_line_char_code=49 {character that prints as |print_ln|}
@d language_code=50 {current hyphenation table}
@d left_hyphen_min_code=51 {minimum left hyphenation fragment size}
@d right_hyphen_min_code=52 {minimum right hyphenation fragment size}
@d holding_inserts_code=53 {do not remove insertion nodes from \.{\\box255}}
@d error_context_lines_code=54 {maximum intermediate line pairs shown}
@d int_pars=55 {total number of integer parameters}
@d count_base=int_base+int_pars {256 user \.{\\count} registers}
@d del_code_base=count_base+256 {256 delimiter code mappings}
@d dimen_base=del_code_base+256 {beginning of region 6}
@#
@d del_code(#)==eqtb[del_code_base+#].int
@d count(#)==eqtb[count_base+#].int
@d int_par(#)==eqtb[int_base+#].int {an integer parameter}
@d pretolerance==int_par(pretolerance_code)
@d tolerance==int_par(tolerance_code)
@d line_penalty==int_par(line_penalty_code)
@d hyphen_penalty==int_par(hyphen_penalty_code)
@d ex_hyphen_penalty==int_par(ex_hyphen_penalty_code)
@d club_penalty==int_par(club_penalty_code)
@d widow_penalty==int_par(widow_penalty_code)
@d display_widow_penalty==int_par(display_widow_penalty_code)
@d broken_penalty==int_par(broken_penalty_code)
@d bin_op_penalty==int_par(bin_op_penalty_code)
@d rel_penalty==int_par(rel_penalty_code)
@d pre_display_penalty==int_par(pre_display_penalty_code)
@d post_display_penalty==int_par(post_display_penalty_code)
@d inter_line_penalty==int_par(inter_line_penalty_code)
@d double_hyphen_demerits==int_par(double_hyphen_demerits_code)
@d final_hyphen_demerits==int_par(final_hyphen_demerits_code)
@d adj_demerits==int_par(adj_demerits_code)
@d mag==int_par(mag_code)
@d delimiter_factor==int_par(delimiter_factor_code)
@d looseness==int_par(looseness_code)
@d time==int_par(time_code)
@d day==int_par(day_code)
@d month==int_par(month_code)
@d year==int_par(year_code)
@d show_box_breadth==int_par(show_box_breadth_code)
@d show_box_depth==int_par(show_box_depth_code)
@d hbadness==int_par(hbadness_code)
@d vbadness==int_par(vbadness_code)
@d pausing==int_par(pausing_code)
@d tracing_online==int_par(tracing_online_code)
@d tracing_macros==int_par(tracing_macros_code)
@d tracing_stats==int_par(tracing_stats_code)
@d tracing_paragraphs==int_par(tracing_paragraphs_code)
@d tracing_pages==int_par(tracing_pages_code)
@d tracing_output==int_par(tracing_output_code)
@d tracing_lost_chars==int_par(tracing_lost_chars_code)
@d tracing_commands==int_par(tracing_commands_code)
@d tracing_restores==int_par(tracing_restores_code)
@d uc_hyph==int_par(uc_hyph_code)
@d output_penalty==int_par(output_penalty_code)
@d max_dead_cycles==int_par(max_dead_cycles_code)
@d hang_after==int_par(hang_after_code)
@d floating_penalty==int_par(floating_penalty_code)
@d global_defs==int_par(global_defs_code)
@d cur_fam==int_par(cur_fam_code)
@d escape_char==int_par(escape_char_code)
@d default_hyphen_char==int_par(default_hyphen_char_code)
@d default_skew_char==int_par(default_skew_char_code)
@d end_line_char==int_par(end_line_char_code)
@d new_line_char==int_par(new_line_char_code)
@d language==int_par(language_code)
@d left_hyphen_min==int_par(left_hyphen_min_code)
@d right_hyphen_min==int_par(right_hyphen_min_code)
@d holding_inserts==int_par(holding_inserts_code)
@d error_context_lines==int_par(error_context_lines_code)

@<Assign the values |depth_threshold:=show_box_depth|...@>=
depth_threshold:=show_box_depth;
breadth_max:=show_box_breadth

@ We can print the symbolic name of an integer parameter as follows.

@p procedure print_param(@!n:integer);
begin case n of
pretolerance_code:print_esc("pretolerance");
tolerance_code:print_esc("tolerance");
line_penalty_code:print_esc("linepenalty");
hyphen_penalty_code:print_esc("hyphenpenalty");
ex_hyphen_penalty_code:print_esc("exhyphenpenalty");
club_penalty_code:print_esc("clubpenalty");
widow_penalty_code:print_esc("widowpenalty");
display_widow_penalty_code:print_esc("displaywidowpenalty");
broken_penalty_code:print_esc("brokenpenalty");
bin_op_penalty_code:print_esc("binoppenalty");
rel_penalty_code:print_esc("relpenalty");
pre_display_penalty_code:print_esc("predisplaypenalty");
post_display_penalty_code:print_esc("postdisplaypenalty");
inter_line_penalty_code:print_esc("interlinepenalty");
double_hyphen_demerits_code:print_esc("doublehyphendemerits");
final_hyphen_demerits_code:print_esc("finalhyphendemerits");
adj_demerits_code:print_esc("adjdemerits");
mag_code:print_esc("mag");
delimiter_factor_code:print_esc("delimiterfactor");
looseness_code:print_esc("looseness");
time_code:print_esc("time");
day_code:print_esc("day");
month_code:print_esc("month");
year_code:print_esc("year");
show_box_breadth_code:print_esc("showboxbreadth");
show_box_depth_code:print_esc("showboxdepth");
hbadness_code:print_esc("hbadness");
vbadness_code:print_esc("vbadness");
pausing_code:print_esc("pausing");
tracing_online_code:print_esc("tracingonline");
tracing_macros_code:print_esc("tracingmacros");
tracing_stats_code:print_esc("tracingstats");
tracing_paragraphs_code:print_esc("tracingparagraphs");
tracing_pages_code:print_esc("tracingpages");
tracing_output_code:print_esc("tracingoutput");
tracing_lost_chars_code:print_esc("tracinglostchars");
tracing_commands_code:print_esc("tracingcommands");
tracing_restores_code:print_esc("tracingrestores");
uc_hyph_code:print_esc("uchyph");
output_penalty_code:print_esc("outputpenalty");
max_dead_cycles_code:print_esc("maxdeadcycles");
hang_after_code:print_esc("hangafter");
floating_penalty_code:print_esc("floatingpenalty");
global_defs_code:print_esc("globaldefs");
cur_fam_code:print_esc("fam");
escape_char_code:print_esc("escapechar");
default_hyphen_char_code:print_esc("defaulthyphenchar");
default_skew_char_code:print_esc("defaultskewchar");
end_line_char_code:print_esc("endlinechar");
new_line_char_code:print_esc("newlinechar");
language_code:print_esc("language");
left_hyphen_min_code:print_esc("lefthyphenmin");
right_hyphen_min_code:print_esc("righthyphenmin");
holding_inserts_code:print_esc("holdinginserts");
error_context_lines_code:print_esc("errorcontextlines");
othercases print("[unknown integer parameter!]")
endcases;
end;

@ The integer parameter names must be entered into the hash table.

@<Put each...@>=
primitive("pretolerance",assign_int,int_base+pretolerance_code);@/
@!@:pretolerance_}{\.{\\pretolerance} primitive@>
primitive("tolerance",assign_int,int_base+tolerance_code);@/
@!@:tolerance_}{\.{\\tolerance} primitive@>
primitive("linepenalty",assign_int,int_base+line_penalty_code);@/
@!@:line_penalty_}{\.{\\linepenalty} primitive@>
primitive("hyphenpenalty",assign_int,int_base+hyphen_penalty_code);@/
@!@:hyphen_penalty_}{\.{\\hyphenpenalty} primitive@>
primitive("exhyphenpenalty",assign_int,int_base+ex_hyphen_penalty_code);@/
@!@:ex_hyphen_penalty_}{\.{\\exhyphenpenalty} primitive@>
primitive("clubpenalty",assign_int,int_base+club_penalty_code);@/
@!@:club_penalty_}{\.{\\clubpenalty} primitive@>
primitive("widowpenalty",assign_int,int_base+widow_penalty_code);@/
@!@:widow_penalty_}{\.{\\widowpenalty} primitive@>
primitive("displaywidowpenalty",
  assign_int,int_base+display_widow_penalty_code);@/
@!@:display_widow_penalty_}{\.{\\displaywidowpenalty} primitive@>
primitive("brokenpenalty",assign_int,int_base+broken_penalty_code);@/
@!@:broken_penalty_}{\.{\\brokenpenalty} primitive@>
primitive("binoppenalty",assign_int,int_base+bin_op_penalty_code);@/
@!@:bin_op_penalty_}{\.{\\binoppenalty} primitive@>
primitive("relpenalty",assign_int,int_base+rel_penalty_code);@/
@!@:rel_penalty_}{\.{\\relpenalty} primitive@>
primitive("predisplaypenalty",assign_int,int_base+pre_display_penalty_code);@/
@!@:pre_display_penalty_}{\.{\\predisplaypenalty} primitive@>
primitive("postdisplaypenalty",assign_int,int_base+post_display_penalty_code);@/
@!@:post_display_penalty_}{\.{\\postdisplaypenalty} primitive@>
primitive("interlinepenalty",assign_int,int_base+inter_line_penalty_code);@/
@!@:inter_line_penalty_}{\.{\\interlinepenalty} primitive@>
primitive("doublehyphendemerits",
  assign_int,int_base+double_hyphen_demerits_code);@/
@!@:double_hyphen_demerits_}{\.{\\doublehyphendemerits} primitive@>
primitive("finalhyphendemerits",
  assign_int,int_base+final_hyphen_demerits_code);@/
@!@:final_hyphen_demerits_}{\.{\\finalhyphendemerits} primitive@>
primitive("adjdemerits",assign_int,int_base+adj_demerits_code);@/
@!@:adj_demerits_}{\.{\\adjdemerits} primitive@>
primitive("mag",assign_int,int_base+mag_code);@/
@!@:mag_}{\.{\\mag} primitive@>
primitive("delimiterfactor",assign_int,int_base+delimiter_factor_code);@/
@!@:delimiter_factor_}{\.{\\delimiterfactor} primitive@>
primitive("looseness",assign_int,int_base+looseness_code);@/
@!@:looseness_}{\.{\\looseness} primitive@>
primitive("time",assign_int,int_base+time_code);@/
@!@:time_}{\.{\\time} primitive@>
primitive("day",assign_int,int_base+day_code);@/
@!@:day_}{\.{\\day} primitive@>
primitive("month",assign_int,int_base+month_code);@/
@!@:month_}{\.{\\month} primitive@>
primitive("year",assign_int,int_base+year_code);@/
@!@:year_}{\.{\\year} primitive@>
primitive("showboxbreadth",assign_int,int_base+show_box_breadth_code);@/
@!@:show_box_breadth_}{\.{\\showboxbreadth} primitive@>
primitive("showboxdepth",assign_int,int_base+show_box_depth_code);@/
@!@:show_box_depth_}{\.{\\showboxdepth} primitive@>
primitive("hbadness",assign_int,int_base+hbadness_code);@/
@!@:hbadness_}{\.{\\hbadness} primitive@>
primitive("vbadness",assign_int,int_base+vbadness_code);@/
@!@:vbadness_}{\.{\\vbadness} primitive@>
primitive("pausing",assign_int,int_base+pausing_code);@/
@!@:pausing_}{\.{\\pausing} primitive@>
primitive("tracingonline",assign_int,int_base+tracing_online_code);@/
@!@:tracing_online_}{\.{\\tracingonline} primitive@>
primitive("tracingmacros",assign_int,int_base+tracing_macros_code);@/
@!@:tracing_macros_}{\.{\\tracingmacros} primitive@>
primitive("tracingstats",assign_int,int_base+tracing_stats_code);@/
@!@:tracing_stats_}{\.{\\tracingstats} primitive@>
primitive("tracingparagraphs",assign_int,int_base+tracing_paragraphs_code);@/
@!@:tracing_paragraphs_}{\.{\\tracingparagraphs} primitive@>
primitive("tracingpages",assign_int,int_base+tracing_pages_code);@/
@!@:tracing_pages_}{\.{\\tracingpages} primitive@>
primitive("tracingoutput",assign_int,int_base+tracing_output_code);@/
@!@:tracing_output_}{\.{\\tracingoutput} primitive@>
primitive("tracinglostchars",assign_int,int_base+tracing_lost_chars_code);@/
@!@:tracing_lost_chars_}{\.{\\tracinglostchars} primitive@>
primitive("tracingcommands",assign_int,int_base+tracing_commands_code);@/
@!@:tracing_commands_}{\.{\\tracingcommands} primitive@>
primitive("tracingrestores",assign_int,int_base+tracing_restores_code);@/
@!@:tracing_restores_}{\.{\\tracingrestores} primitive@>
primitive("uchyph",assign_int,int_base+uc_hyph_code);@/
@!@:uc_hyph_}{\.{\\uchyph} primitive@>
primitive("outputpenalty",assign_int,int_base+output_penalty_code);@/
@!@:output_penalty_}{\.{\\outputpenalty} primitive@>
primitive("maxdeadcycles",assign_int,int_base+max_dead_cycles_code);@/
@!@:max_dead_cycles_}{\.{\\maxdeadcycles} primitive@>
primitive("hangafter",assign_int,int_base+hang_after_code);@/
@!@:hang_after_}{\.{\\hangafter} primitive@>
primitive("floatingpenalty",assign_int,int_base+floating_penalty_code);@/
@!@:floating_penalty_}{\.{\\floatingpenalty} primitive@>
primitive("globaldefs",assign_int,int_base+global_defs_code);@/
@!@:global_defs_}{\.{\\globaldefs} primitive@>
primitive("fam",assign_int,int_base+cur_fam_code);@/
@!@:fam_}{\.{\\fam} primitive@>
primitive("escapechar",assign_int,int_base+escape_char_code);@/
@!@:escape_char_}{\.{\\escapechar} primitive@>
primitive("defaulthyphenchar",assign_int,int_base+default_hyphen_char_code);@/
@!@:default_hyphen_char_}{\.{\\defaulthyphenchar} primitive@>
primitive("defaultskewchar",assign_int,int_base+default_skew_char_code);@/
@!@:default_skew_char_}{\.{\\defaultskewchar} primitive@>
primitive("endlinechar",assign_int,int_base+end_line_char_code);@/
@!@:end_line_char_}{\.{\\endlinechar} primitive@>
primitive("newlinechar",assign_int,int_base+new_line_char_code);@/
@!@:new_line_char_}{\.{\\newlinechar} primitive@>
primitive("language",assign_int,int_base+language_code);@/
@!@:language_}{\.{\\language} primitive@>
primitive("lefthyphenmin",assign_int,int_base+left_hyphen_min_code);@/
@!@:left_hyphen_min_}{\.{\\lefthyphenmin} primitive@>
primitive("righthyphenmin",assign_int,int_base+right_hyphen_min_code);@/
@!@:right_hyphen_min_}{\.{\\righthyphenmin} primitive@>
primitive("holdinginserts",assign_int,int_base+holding_inserts_code);@/
@!@:holding_inserts_}{\.{\\holdinginserts} primitive@>
primitive("errorcontextlines",assign_int,int_base+error_context_lines_code);@/
@!@:error_context_lines_}{\.{\\errorcontextlines} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
assign_int: if chr_code<count_base then print_param(chr_code-int_base)
  else  begin print_esc("count"); print_int(chr_code-count_base);
    end;

@ The integer parameters should really be initialized by a macro package;
the following initialization does the minimum to keep \TeX\ from
complete failure.
@^null delimiter@>

@<Initialize table entries...@>=
for k:=int_base to del_code_base-1 do eqtb[k].int:=0;
mag:=1000; tolerance:=10000; hang_after:=1; max_dead_cycles:=25;
escape_char:="\"; end_line_char:=carriage_return;
for k:=0 to 255 do del_code(k):=-1;
del_code("."):=0; {this null delimiter is used in error recovery}

@ The following procedure, which is called just before \TeX\ initializes its
input and output, establishes the initial values of the date and time.
@^system dependencies@>
Since standard \PASCAL\ cannot provide such information, something special
is needed. The program here simply specifies July 4, 1776, at noon; but
users probably want a better approximation to the truth.

@p procedure fix_date_and_time;
begin time:=12*60; {minutes since midnight}
day:=4; {fourth day of the month}
month:=7; {seventh month of the year}
year:=1776; {Anno Domini}
end;

@ @<Show equivalent |n|, in region 5@>=
begin if n<count_base then print_param(n-int_base)
else if  n<del_code_base then
  begin print_esc("count"); print_int(n-count_base);
  end
else  begin print_esc("delcode"); print_int(n-del_code_base);
  end;
print_char("="); print_int(eqtb[n].int);
end

@ @<Set variable |c| to the current escape character@>=c:=escape_char

@ @<Character |s| is the current new-line character@>=s=new_line_char

@ \TeX\ is occasionally supposed to print diagnostic information that
goes only into the transcript file, unless |tracing_online| is positive.
Here are two routines that adjust the destination of print commands:

@p procedure begin_diagnostic; {prepare to do some tracing}
begin old_setting:=selector;
if (tracing_online<=0)and(selector=term_and_log) then
  begin decr(selector);
  if history=spotless then history:=warning_issued;
  end;
end;
@#
procedure end_diagnostic(@!blank_line:boolean);
  {restore proper conditions after tracing}
begin print_nl("");
if blank_line then print_ln;
selector:=old_setting;
end;

@ Of course we had better declare another global variable, if the previous
routines are going to work.

@<Glob...@>=
@!old_setting:0..max_selector;

@ The final region of |eqtb| contains the dimension parameters defined
here, and the 256 \.{\\dimen} registers.

@d par_indent_code=0 {indentation of paragraphs}
@d math_surround_code=1 {space around math in text}
@d line_skip_limit_code=2 {threshold for |line_skip| instead of |baseline_skip|}
@d hsize_code=3 {line width in horizontal mode}
@d vsize_code=4 {page height in vertical mode}
@d max_depth_code=5 {maximum depth of boxes on main pages}
@d split_max_depth_code=6 {maximum depth of boxes on split pages}
@d box_max_depth_code=7 {maximum depth of explicit vboxes}
@d hfuzz_code=8 {tolerance for overfull hbox messages}
@d vfuzz_code=9 {tolerance for overfull vbox messages}
@d delimiter_shortfall_code=10 {maximum amount uncovered by variable delimiters}
@d null_delimiter_space_code=11 {blank space in null delimiters}
@d script_space_code=12 {extra space after subscript or superscript}
@d pre_display_size_code=13 {length of text preceding a display}
@d display_width_code=14 {length of line for displayed equation}
@d display_indent_code=15 {indentation of line for displayed equation}
@d overfull_rule_code=16 {width of rule that identifies overfull hboxes}
@d hang_indent_code=17 {amount of hanging indentation}
@d h_offset_code=18 {amount of horizontal offset when shipping pages out}
@d v_offset_code=19 {amount of vertical offset when shipping pages out}
@d emergency_stretch_code=20 {reduces badnesses on final pass of line-breaking}
@d dimen_pars=21 {total number of dimension parameters}
@d scaled_base=dimen_base+dimen_pars
  {table of 256 user-defined \.{\\dimen} registers}
@d eqtb_size=scaled_base+255 {largest subscript of |eqtb|}
@#
@d dimen(#)==eqtb[scaled_base+#].sc
@d dimen_par(#)==eqtb[dimen_base+#].sc {a scaled quantity}
@d par_indent==dimen_par(par_indent_code)
@d math_surround==dimen_par(math_surround_code)
@d line_skip_limit==dimen_par(line_skip_limit_code)
@d hsize==dimen_par(hsize_code)
@d vsize==dimen_par(vsize_code)
@d max_depth==dimen_par(max_depth_code)
@d split_max_depth==dimen_par(split_max_depth_code)
@d box_max_depth==dimen_par(box_max_depth_code)
@d hfuzz==dimen_par(hfuzz_code)
@d vfuzz==dimen_par(vfuzz_code)
@d delimiter_shortfall==dimen_par(delimiter_shortfall_code)
@d null_delimiter_space==dimen_par(null_delimiter_space_code)
@d script_space==dimen_par(script_space_code)
@d pre_display_size==dimen_par(pre_display_size_code)
@d display_width==dimen_par(display_width_code)
@d display_indent==dimen_par(display_indent_code)
@d overfull_rule==dimen_par(overfull_rule_code)
@d hang_indent==dimen_par(hang_indent_code)
@d h_offset==dimen_par(h_offset_code)
@d v_offset==dimen_par(v_offset_code)
@d emergency_stretch==dimen_par(emergency_stretch_code)

@p procedure print_length_param(@!n:integer);
begin case n of
par_indent_code:print_esc("parindent");
math_surround_code:print_esc("mathsurround");
line_skip_limit_code:print_esc("lineskiplimit");
hsize_code:print_esc("hsize");
vsize_code:print_esc("vsize");
max_depth_code:print_esc("maxdepth");
split_max_depth_code:print_esc("splitmaxdepth");
box_max_depth_code:print_esc("boxmaxdepth");
hfuzz_code:print_esc("hfuzz");
vfuzz_code:print_esc("vfuzz");
delimiter_shortfall_code:print_esc("delimitershortfall");
null_delimiter_space_code:print_esc("nulldelimiterspace");
script_space_code:print_esc("scriptspace");
pre_display_size_code:print_esc("predisplaysize");
display_width_code:print_esc("displaywidth");
display_indent_code:print_esc("displayindent");
overfull_rule_code:print_esc("overfullrule");
hang_indent_code:print_esc("hangindent");
h_offset_code:print_esc("hoffset");
v_offset_code:print_esc("voffset");
emergency_stretch_code:print_esc("emergencystretch");
othercases print("[unknown dimen parameter!]")
endcases;
end;

@ @<Put each...@>=
primitive("parindent",assign_dimen,dimen_base+par_indent_code);@/
@!@:par_indent_}{\.{\\parindent} primitive@>
primitive("mathsurround",assign_dimen,dimen_base+math_surround_code);@/
@!@:math_surround_}{\.{\\mathsurround} primitive@>
primitive("lineskiplimit",assign_dimen,dimen_base+line_skip_limit_code);@/
@!@:line_skip_limit_}{\.{\\lineskiplimit} primitive@>
primitive("hsize",assign_dimen,dimen_base+hsize_code);@/
@!@:hsize_}{\.{\\hsize} primitive@>
primitive("vsize",assign_dimen,dimen_base+vsize_code);@/
@!@:vsize_}{\.{\\vsize} primitive@>
primitive("maxdepth",assign_dimen,dimen_base+max_depth_code);@/
@!@:max_depth_}{\.{\\maxdepth} primitive@>
primitive("splitmaxdepth",assign_dimen,dimen_base+split_max_depth_code);@/
@!@:split_max_depth_}{\.{\\splitmaxdepth} primitive@>
primitive("boxmaxdepth",assign_dimen,dimen_base+box_max_depth_code);@/
@!@:box_max_depth_}{\.{\\boxmaxdepth} primitive@>
primitive("hfuzz",assign_dimen,dimen_base+hfuzz_code);@/
@!@:hfuzz_}{\.{\\hfuzz} primitive@>
primitive("vfuzz",assign_dimen,dimen_base+vfuzz_code);@/
@!@:vfuzz_}{\.{\\vfuzz} primitive@>
primitive("delimitershortfall",
  assign_dimen,dimen_base+delimiter_shortfall_code);@/
@!@:delimiter_shortfall_}{\.{\\delimitershortfall} primitive@>
primitive("nulldelimiterspace",
  assign_dimen,dimen_base+null_delimiter_space_code);@/
@!@:null_delimiter_space_}{\.{\\nulldelimiterspace} primitive@>
primitive("scriptspace",assign_dimen,dimen_base+script_space_code);@/
@!@:script_space_}{\.{\\scriptspace} primitive@>
primitive("predisplaysize",assign_dimen,dimen_base+pre_display_size_code);@/
@!@:pre_display_size_}{\.{\\predisplaysize} primitive@>
primitive("displaywidth",assign_dimen,dimen_base+display_width_code);@/
@!@:display_width_}{\.{\\displaywidth} primitive@>
primitive("displayindent",assign_dimen,dimen_base+display_indent_code);@/
@!@:display_indent_}{\.{\\displayindent} primitive@>
primitive("overfullrule",assign_dimen,dimen_base+overfull_rule_code);@/
@!@:overfull_rule_}{\.{\\overfullrule} primitive@>
primitive("hangindent",assign_dimen,dimen_base+hang_indent_code);@/
@!@:hang_indent_}{\.{\\hangindent} primitive@>
primitive("hoffset",assign_dimen,dimen_base+h_offset_code);@/
@!@:h_offset_}{\.{\\hoffset} primitive@>
primitive("voffset",assign_dimen,dimen_base+v_offset_code);@/
@!@:v_offset_}{\.{\\voffset} primitive@>
primitive("emergencystretch",assign_dimen,dimen_base+emergency_stretch_code);@/
@!@:emergency_stretch_}{\.{\\emergencystretch} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
assign_dimen: if chr_code<scaled_base then
    print_length_param(chr_code-dimen_base)
  else  begin print_esc("dimen"); print_int(chr_code-scaled_base);
    end;

@ @<Initialize table entries...@>=
for k:=dimen_base to eqtb_size do eqtb[k].sc:=0;

@ @<Show equivalent |n|, in region 6@>=
begin if n<scaled_base then print_length_param(n-dimen_base)
else  begin print_esc("dimen"); print_int(n-scaled_base);
  end;
print_char("="); print_scaled(eqtb[n].sc); print("pt");
end

@ Here is a procedure that displays the contents of |eqtb[n]|
symbolically.

@p@t\4@>@<Declare the procedure called |print_cmd_chr|@>@;@/
@!stat procedure show_eqtb(@!n:pointer);
begin if n<active_base then print_char("?") {this can't happen}
else if n<glue_base then @<Show equivalent |n|, in region 1 or 2@>
else if n<local_base then @<Show equivalent |n|, in region 3@>
else if n<int_base then @<Show equivalent |n|, in region 4@>
else if n<dimen_base then @<Show equivalent |n|, in region 5@>
else if n<=eqtb_size then @<Show equivalent |n|, in region 6@>
else print_char("?"); {this can't happen either}
end;
tats

@ The last two regions of |eqtb| have fullword values instead of the
three fields |eq_level|, |eq_type|, and |equiv|. An |eq_type| is unnecessary,
but \TeX\ needs to store the |eq_level| information in another array
called |xeq_level|.

@<Glob...@>=
@!eqtb:array[active_base..eqtb_size] of memory_word;
@!xeq_level:array[int_base..eqtb_size] of quarterword;

@ @<Set init...@>=
for k:=int_base to eqtb_size do xeq_level[k]:=level_one;

@ When the debugging routine |search_mem| is looking for pointers having a
given value, it is interested only in regions 1 to~3 of~|eqtb|, and in the
first part of region~4.

@<Search |eqtb| for equivalents equal to |p|@>=
for q:=active_base to box_base+255 do
  begin if equiv(q)=p then
    begin print_nl("EQUIV("); print_int(q); print_char(")");
    end;
  end

@* \[18] The hash table.
Control sequences are stored and retrieved by means of a fairly standard hash
table algorithm called the method of ``coalescing lists'' (cf.\ Algorithm 6.4C
in {\sl The Art of Computer Programming\/}). Once a control sequence enters the
table, it is never removed, because there are complicated situations
involving \.{\\gdef} where the removal of a control sequence at the end of
a group would be a mistake preventable only by the introduction of a
complicated reference-count mechanism.

The actual sequence of letters forming a control sequence identifier is
stored in the |str_pool| array together with all the other strings. An
auxiliary array |hash| consists of items with two halfword fields per
word. The first of these, called |next(p)|, points to the next identifier
belonging to the same coalesced list as the identifier corresponding to~|p|;
and the other, called |text(p)|, points to the |str_start| entry for
|p|'s identifier. If position~|p| of the hash table is empty, we have
|text(p)=0|; if position |p| is either empty or the end of a coalesced
hash list, we have |next(p)=0|. An auxiliary pointer variable called
|hash_used| is maintained in such a way that all locations |p>=hash_used|
are nonempty. The global variable |cs_count| tells how many multiletter
control sequences have been defined, if statistics are being kept.

A global boolean variable called |no_new_control_sequence| is set to
|true| during the time that new hash table entries are forbidden.

@d next(#) == hash[#].lh {link for coalesced lists}
@d text(#) == hash[#].rh {string number for control sequence name}
@d hash_is_full == (hash_used=hash_base) {test if all positions are occupied}
@d font_id_text(#) == text(font_id_base+#) {a frozen font identifier's name}

@<Glob...@>=
@!hash: array[hash_base..undefined_control_sequence-1] of two_halves;
  {the hash table}
@!hash_used:pointer; {allocation pointer for |hash|}
@!no_new_control_sequence:boolean; {are new identifiers legal?}
@!cs_count:integer; {total number of known identifiers}

@ @<Set init...@>=
no_new_control_sequence:=true; {new identifiers are usually forbidden}
next(hash_base):=0; text(hash_base):=0;
for k:=hash_base+1 to undefined_control_sequence-1 do hash[k]:=hash[hash_base];

@ @<Initialize table entries...@>=
hash_used:=frozen_control_sequence; {nothing is used}
cs_count:=0;
eq_type(frozen_dont_expand):=dont_expand;
text(frozen_dont_expand):="notexpanded:";
@.notexpanded:@>

@ Here is the subroutine that searches the hash table for an identifier
that matches a given string of length |l>1| appearing in |buffer[j..
(j+l-1)]|. If the identifier is found, the corresponding hash table address
is returned. Otherwise, if the global variable |no_new_control_sequence|
is |true|, the dummy address |undefined_control_sequence| is returned.
Otherwise the identifier is inserted into the hash table and its location
is returned.

@p function id_lookup(@!j,@!l:integer):pointer; {search the hash table}
label found; {go here if you found it}
var h:integer; {hash code}
@!d:integer; {number of characters in incomplete current string}
@!p:pointer; {index in |hash| array}
@!k:pointer; {index in |buffer| array}
begin @<Compute the hash code |h|@>;
p:=h+hash_base; {we start searching here; note that |0<=h<hash_prime|}
loop@+begin if text(p)>0 then if length(text(p))=l then
    if str_eq_buf(text(p),j) then goto found;
  if next(p)=0 then
    begin if no_new_control_sequence then
      p:=undefined_control_sequence
    else @<Insert a new control sequence after |p|, then make
      |p| point to it@>;
    goto found;
    end;
  p:=next(p);
  end;
found: id_lookup:=p;
end;

@ @<Insert a new control...@>=
begin if text(p)>0 then
  begin repeat if hash_is_full then overflow("hash size",hash_size);
@:TeX capacity exceeded hash size}{\quad hash size@>
  decr(hash_used);
  until text(hash_used)=0; {search for an empty location in |hash|}
  next(p):=hash_used; p:=hash_used;
  end;
str_room(l); d:=cur_length;
while pool_ptr>str_start[str_ptr] do
  begin decr(pool_ptr); str_pool[pool_ptr+l]:=str_pool[pool_ptr];
  end; {move current string up to make room for another}
for k:=j to j+l-1 do append_char(buffer[k]);
text(p):=make_string; pool_ptr:=pool_ptr+d;
@!stat incr(cs_count);@+tats@;@/
end

@ The value of |hash_prime| should be roughly 85\pct! of |hash_size|, and it
should be a prime number.  The theory of hashing tells us to expect fewer
than two table probes, on the average, when the search is successful.
[See J.~S. Vitter, {\sl Journal of the ACM\/ \bf30} (1983), 231--258.]
@^Vitter, Jeffrey Scott@>

@<Compute the hash code |h|@>=
h:=buffer[j];
for k:=j+1 to j+l-1 do
  begin h:=h+h+buffer[k];
  while h>=hash_prime do h:=h-hash_prime;
  end

@ Single-character control sequences do not need to be looked up in a hash
table, since we can use the character code itself as a direct address.
The procedure |print_cs| prints the name of a control sequence, given
a pointer to its address in |eqtb|. A space is printed after the name
unless it is a single nonletter or an active character. This procedure
might be invoked with invalid data, so it is ``extra robust.'' The
individual characters must be printed one at a time using |print|, since
they may be unprintable.

@<Basic printing...@>=
procedure print_cs(@!p:integer); {prints a purported control sequence}
begin if p<hash_base then {single character}
  if p>=single_base then
    if p=null_cs then
      begin print_esc("csname"); print_esc("endcsname");
      end
    else  begin print_esc(p-single_base);
      if cat_code(p-single_base)=letter then print_char(" ");
      end
  else if p<active_base then print_esc("IMPOSSIBLE.")
@.IMPOSSIBLE@>
  else print(p-active_base)
else if p>=undefined_control_sequence then print_esc("IMPOSSIBLE.")
else if (text(p)<0)or(text(p)>=str_ptr) then print_esc("NONEXISTENT.")
@.NONEXISTENT@>
else  begin print_esc(text(p));
  print_char(" ");
  end;
end;

@ Here is a similar procedure; it avoids the error checks, and it never
prints a space after the control sequence.

@<Basic printing procedures@>=
procedure sprint_cs(@!p:pointer); {prints a control sequence}
begin if p<hash_base then
  if p<single_base then print(p-active_base)
  else  if p<null_cs then print_esc(p-single_base)
    else  begin print_esc("csname"); print_esc("endcsname");
      end
else print_esc(text(p));
end;

@ We need to put \TeX's ``primitive'' control sequences into the hash
table, together with their command code (which will be the |eq_type|)
and an operand (which will be the |equiv|). The |primitive| procedure
does this, in a way that no \TeX\ user can. The global value |cur_val|
contains the new |eqtb| pointer after |primitive| has acted.

@p @!init procedure primitive(@!s:str_number;@!c:quarterword;@!o:halfword);
var k:pool_pointer; {index into |str_pool|}
@!j:small_number; {index into |buffer|}
@!l:small_number; {length of the string}
begin if s<256 then cur_val:=s+single_base
else  begin k:=str_start[s]; l:=str_start[s+1]-k;
    {we will move |s| into the (empty) |buffer|}
  for j:=0 to l-1 do buffer[j]:=so(str_pool[k+j]);
  cur_val:=id_lookup(0,l); {|no_new_control_sequence| is |false|}
  flush_string; text(cur_val):=s; {we don't want to have the string twice}
  end;
eq_level(cur_val):=level_one; eq_type(cur_val):=c; equiv(cur_val):=o;
end;
tini

@ Many of \TeX's primitives need no |equiv|, since they are identifiable
by their |eq_type| alone. These primitives are loaded into the hash table
as follows:

@<Put each of \TeX's primitives into the hash table@>=
primitive(" ",ex_space,0);@/
@!@:Single-character primitives /}{\quad\.{\\\ }@>
primitive("/",ital_corr,0);@/
@!@:Single-character primitives /}{\quad\.{\\/}@>
primitive("accent",accent,0);@/
@!@:accent_}{\.{\\accent} primitive@>
primitive("advance",advance,0);@/
@!@:advance_}{\.{\\advance} primitive@>
primitive("afterassignment",after_assignment,0);@/
@!@:after_assignment_}{\.{\\afterassignment} primitive@>
primitive("aftergroup",after_group,0);@/
@!@:after_group_}{\.{\\aftergroup} primitive@>
primitive("begingroup",begin_group,0);@/
@!@:begin_group_}{\.{\\begingroup} primitive@>
primitive("char",char_num,0);@/
@!@:char_}{\.{\\char} primitive@>
primitive("csname",cs_name,0);@/
@!@:cs_name_}{\.{\\csname} primitive@>
primitive("delimiter",delim_num,0);@/
@!@:delimiter_}{\.{\\delimiter} primitive@>
primitive("divide",divide,0);@/
@!@:divide_}{\.{\\divide} primitive@>
primitive("endcsname",end_cs_name,0);@/
@!@:end_cs_name_}{\.{\\endcsname} primitive@>
primitive("endgroup",end_group,0);
@!@:end_group_}{\.{\\endgroup} primitive@>
text(frozen_end_group):="endgroup"; eqtb[frozen_end_group]:=eqtb[cur_val];@/
primitive("expandafter",expand_after,0);@/
@!@:expand_after_}{\.{\\expandafter} primitive@>
primitive("font",def_font,0);@/
@!@:font_}{\.{\\font} primitive@>
primitive("fontdimen",assign_font_dimen,0);@/
@!@:font_dimen_}{\.{\\fontdimen} primitive@>
primitive("halign",halign,0);@/
@!@:halign_}{\.{\\halign} primitive@>
primitive("hrule",hrule,0);@/
@!@:hrule_}{\.{\\hrule} primitive@>
primitive("ignorespaces",ignore_spaces,0);@/
@!@:ignore_spaces_}{\.{\\ignorespaces} primitive@>
primitive("insert",insert,0);@/
@!@:insert_}{\.{\\insert} primitive@>
primitive("mark",mark,0);@/
@!@:mark_}{\.{\\mark} primitive@>
primitive("mathaccent",math_accent,0);@/
@!@:math_accent_}{\.{\\mathaccent} primitive@>
primitive("mathchar",math_char_num,0);@/
@!@:math_char_}{\.{\\mathchar} primitive@>
primitive("mathchoice",math_choice,0);@/
@!@:math_choice_}{\.{\\mathchoice} primitive@>
primitive("multiply",multiply,0);@/
@!@:multiply_}{\.{\\multiply} primitive@>
primitive("noalign",no_align,0);@/
@!@:no_align_}{\.{\\noalign} primitive@>
primitive("noboundary",no_boundary,0);@/
@!@:no_boundary_}{\.{\\noboundary} primitive@>
primitive("noexpand",no_expand,0);@/
@!@:no_expand_}{\.{\\noexpand} primitive@>
primitive("nonscript",non_script,0);@/
@!@:non_script_}{\.{\\nonscript} primitive@>
primitive("omit",omit,0);@/
@!@:omit_}{\.{\\omit} primitive@>
primitive("parshape",set_shape,0);@/
@!@:par_shape_}{\.{\\parshape} primitive@>
primitive("penalty",break_penalty,0);@/
@!@:penalty_}{\.{\\penalty} primitive@>
primitive("prevgraf",set_prev_graf,0);@/
@!@:prev_graf_}{\.{\\prevgraf} primitive@>
primitive("radical",radical,0);@/
@!@:radical_}{\.{\\radical} primitive@>
primitive("read",read_to_cs,0);@/
@!@:read_}{\.{\\read} primitive@>
primitive("relax",relax,256); {cf.\ |scan_file_name|}
@!@:relax_}{\.{\\relax} primitive@>
text(frozen_relax):="relax"; eqtb[frozen_relax]:=eqtb[cur_val];@/
primitive("setbox",set_box,0);@/
@!@:set_box_}{\.{\\setbox} primitive@>
primitive("the",the,0);@/
@!@:the_}{\.{\\the} primitive@>
primitive("toks",toks_register,0);@/
@!@:toks_}{\.{\\toks} primitive@>
primitive("vadjust",vadjust,0);@/
@!@:vadjust_}{\.{\\vadjust} primitive@>
primitive("valign",valign,0);@/
@!@:valign_}{\.{\\valign} primitive@>
primitive("vcenter",vcenter,0);@/
@!@:vcenter_}{\.{\\vcenter} primitive@>
primitive("vrule",vrule,0);@/
@!@:vrule_}{\.{\\vrule} primitive@>

@ Each primitive has a corresponding inverse, so that it is possible to
display the cryptic numeric contents of |eqtb| in symbolic form.
Every call of |primitive| in this program is therefore accompanied by some
straightforward code that forms part of the |print_cmd_chr| routine
below.

@<Cases of |print_cmd_chr|...@>=
accent: print_esc("accent");
advance: print_esc("advance");
after_assignment: print_esc("afterassignment");
after_group: print_esc("aftergroup");
assign_font_dimen: print_esc("fontdimen");
begin_group: print_esc("begingroup");
break_penalty: print_esc("penalty");
char_num: print_esc("char");
cs_name: print_esc("csname");
def_font: print_esc("font");
delim_num: print_esc("delimiter");
divide: print_esc("divide");
end_cs_name: print_esc("endcsname");
end_group: print_esc("endgroup");
ex_space: print_esc(" ");
expand_after: print_esc("expandafter");
halign: print_esc("halign");
hrule: print_esc("hrule");
ignore_spaces: print_esc("ignorespaces");
insert: print_esc("insert");
ital_corr: print_esc("/");
mark: print_esc("mark");
math_accent: print_esc("mathaccent");
math_char_num: print_esc("mathchar");
math_choice: print_esc("mathchoice");
multiply: print_esc("multiply");
no_align: print_esc("noalign");
no_boundary:print_esc("noboundary");
no_expand: print_esc("noexpand");
non_script: print_esc("nonscript");
omit: print_esc("omit");
radical: print_esc("radical");
read_to_cs: print_esc("read");
relax: print_esc("relax");
set_box: print_esc("setbox");
set_prev_graf: print_esc("prevgraf");
set_shape: print_esc("parshape");
the: print_esc("the");
toks_register: print_esc("toks");
vadjust: print_esc("vadjust");
valign: print_esc("valign");
vcenter: print_esc("vcenter");
vrule: print_esc("vrule");

@ We will deal with the other primitives later, at some point in the program
where their |eq_type| and |equiv| values are more meaningful.  For example,
the primitives for math mode will be loaded when we consider the routines
that deal with formulas. It is easy to find where each particular
primitive was treated by looking in the index at the end; for example, the
section where |"radical"| entered |eqtb| is listed under `\.{\\radical}
primitive'. (Primitives consisting of a single nonalphabetic character,
@!like `\.{\\/}', are listed under `Single-character primitives'.)
@!@^Single-character primitives@>

Meanwhile, this is a convenient place to catch up on something we were unable
to do before the hash table was defined:

@<Print the font identifier for |font(p)|@>=
print_esc(font_id_text(font(p)))

@* \[19] Saving and restoring equivalents.
The nested structure provided by `$\.{\char'173}\ldots\.{\char'175}$' groups
in \TeX\ means that |eqtb| entries valid in outer groups should be saved
and restored later if they are overridden inside the braces. When a new |eqtb|
value is being assigned, the program therefore checks to see if the previous
entry belongs to an outer level. In such a case, the old value is placed
on the |save_stack| just before the new value enters |eqtb|. At the
end of a grouping level, i.e., when the right brace is sensed, the
|save_stack| is used to restore the outer values, and the inner ones are
destroyed.

Entries on the |save_stack| are of type |memory_word|. The top item on
this stack is |save_stack[p]|, where |p=save_ptr-1|; it contains three
fields called |save_type|, |save_level|, and |save_index|, and it is
interpreted in one of four ways:

\yskip\hangg 1) If |save_type(p)=restore_old_value|, then
|save_index(p)| is a location in |eqtb| whose current value should
be destroyed at the end of the current group and replaced by |save_stack[p-1]|.
Furthermore if |save_index(p)>=int_base|, then |save_level(p)|
should replace the corresponding entry in |xeq_level|.

\yskip\hangg 2) If |save_type(p)=restore_zero|, then |save_index(p)|
is a location in |eqtb| whose current value should be destroyed at the end
of the current group, when it should be
replaced by the current value of |eqtb[undefined_control_sequence]|.

\yskip\hangg 3) If |save_type(p)=insert_token|, then |save_index(p)|
is a token that should be inserted into \TeX's input when the current
group ends.

\yskip\hangg 4) If |save_type(p)=level_boundary|, then |save_level(p)|
is a code explaining what kind of group we were previously in, and
|save_index(p)| points to the level boundary word at the bottom of
the entries for that group.

@d save_type(#)==save_stack[#].hh.b0 {classifies a |save_stack| entry}
@d save_level(#)==save_stack[#].hh.b1
  {saved level for regions 5 and 6, or group code}
@d save_index(#)==save_stack[#].hh.rh
  {|eqtb| location or |save_stack| location}
@d restore_old_value=0 {|save_type| when a value should be restored later}
@d restore_zero=1 {|save_type| when an undefined entry should be restored}
@d insert_token=2 {|save_type| when a token is being saved for later use}
@d level_boundary=3 {|save_type| corresponding to beginning of group}

@ Here are the group codes that are used to discriminate between different
kinds of groups. They allow \TeX\ to decide what special actions, if any,
should be performed when a group ends.
\def\grp{\.{\char'173...\char'175}}

Some groups are not supposed to be ended by right braces. For example,
the `\.\$' that begins a math formula causes a |math_shift_group| to
be started, and this should be terminated by a matching `\.\$'. Similarly,
a group that starts with \.{\\left} should end with \.{\\right}, and
one that starts with \.{\\begingroup} should end with \.{\\endgroup}.

@d bottom_level=0 {group code for the outside world}
@d simple_group=1 {group code for local structure only}
@d hbox_group=2 {code for `\.{\\hbox}\grp'}
@d adjusted_hbox_group=3 {code for `\.{\\hbox}\grp' in vertical mode}
@d vbox_group=4 {code for `\.{\\vbox}\grp'}
@d vtop_group=5 {code for `\.{\\vtop}\grp'}
@d align_group=6 {code for `\.{\\halign}\grp', `\.{\\valign}\grp'}
@d no_align_group=7 {code for `\.{\\noalign}\grp'}
@d output_group=8 {code for output routine}
@d math_group=9 {code for, e.g, `\.{\char'136}\grp'}
@d disc_group=10 {code for `\.{\\discretionary}\grp\grp\grp'}
@d insert_group=11 {code for `\.{\\insert}\grp', `\.{\\vadjust}\grp'}
@d vcenter_group=12 {code for `\.{\\vcenter}\grp'}
@d math_choice_group=13 {code for `\.{\\mathchoice}\grp\grp\grp\grp'}
@d semi_simple_group=14 {code for `\.{\\begingroup...\\endgroup}'}
@d math_shift_group=15 {code for `\.{\$...\$}'}
@d math_left_group=16 {code for `\.{\\left...\\right}'}
@d max_group_code=16

@<Types...@>=
@!group_code=0..max_group_code; {|save_level| for a level boundary}

@ The global variable |cur_group| keeps track of what sort of group we are
currently in. Another global variable, |cur_boundary|, points to the
topmost |level_boundary| word.  And |cur_level| is the current depth of
nesting. The routines are designed to preserve the condition that no entry
in the |save_stack| or in |eqtb| ever has a level greater than |cur_level|.

@ @<Glob...@>=
@!save_stack : array[0..save_size] of memory_word;
@!save_ptr : 0..save_size; {first unused entry on |save_stack|}
@!max_save_stack:0..save_size; {maximum usage of save stack}
@!cur_level: quarterword; {current nesting level for groups}
@!cur_group: group_code; {current group type}
@!cur_boundary: 0..save_size; {where the current level begins}

@ At this time it might be a good idea for the reader to review the introduction
to |eqtb| that was given above just before the long lists of parameter names.
Recall that the ``outer level'' of the program is |level_one|, since
undefined control sequences are assumed to be ``defined'' at |level_zero|.

@<Set init...@>=
save_ptr:=0; cur_level:=level_one; cur_group:=bottom_level; cur_boundary:=0;
max_save_stack:=0;

@ The following macro is used to test if there is room for up to six more
entries on |save_stack|. By making a conservative test like this, we can
get by with testing for overflow in only a few places.

@d check_full_save_stack==if save_ptr>max_save_stack then
  begin max_save_stack:=save_ptr;
  if max_save_stack>save_size-6 then overflow("save size",save_size);
@:TeX capacity exceeded save size}{\quad save size@>
  end

@ Procedure |new_save_level| is called when a group begins. The
argument is a group identification code like `|hbox_group|'. After
calling this routine, it is safe to put five more entries on |save_stack|.

In some cases integer-valued items are placed onto the
|save_stack| just below a |level_boundary| word, because this is a
convenient place to keep information that is supposed to ``pop up'' just
when the group has finished.
For example, when `\.{\\hbox to 100pt}\grp' is being treated, the 100pt
dimension is stored on |save_stack| just before |new_save_level| is
called.

We use the notation |saved(k)| to stand for an integer item that
appears in location |save_ptr+k| of the save stack.

@d saved(#)==save_stack[save_ptr+#].int

@p procedure new_save_level(@!c:group_code); {begin a new level of grouping}
begin check_full_save_stack;
save_type(save_ptr):=level_boundary; save_level(save_ptr):=cur_group;
save_index(save_ptr):=cur_boundary;
if cur_level=max_quarterword then overflow("grouping levels",
@:TeX capacity exceeded grouping levels}{\quad grouping levels@>
  max_quarterword-min_quarterword);
  {quit if |(cur_level+1)| is too big to be stored in |eqtb|}
cur_boundary:=save_ptr; incr(cur_level); incr(save_ptr); cur_group:=c;
end;

@ Just before an entry of |eqtb| is changed, the following procedure should
be called to update the other data structures properly. It is important
to keep in mind that reference counts in |mem| include references from
within |save_stack|, so these counts must be handled carefully.
@^reference counts@>

@p procedure eq_destroy(@!w:memory_word); {gets ready to forget |w|}
var q:pointer; {|equiv| field of |w|}
begin case eq_type_field(w) of
call,long_call,outer_call,long_outer_call: delete_token_ref(equiv_field(w));
glue_ref: delete_glue_ref(equiv_field(w));
shape_ref: begin q:=equiv_field(w); {we need to free a \.{\\parshape} block}
  if q<>null then free_node(q,info(q)+info(q)+1);
  end; {such a block is |2n+1| words long, where |n=info(q)|}
box_ref: flush_node_list(equiv_field(w));
othercases do_nothing
endcases;
end;

@ To save a value of |eqtb[p]| that was established at level |l|, we
can use the following subroutine.

@p procedure eq_save(@!p:pointer;@!l:quarterword); {saves |eqtb[p]|}
begin check_full_save_stack;
if l=level_zero then save_type(save_ptr):=restore_zero
else  begin save_stack[save_ptr]:=eqtb[p]; incr(save_ptr);
  save_type(save_ptr):=restore_old_value;
  end;
save_level(save_ptr):=l; save_index(save_ptr):=p; incr(save_ptr);
end;

@ The procedure |eq_define| defines an |eqtb| entry having specified
|eq_type| and |equiv| fields, and saves the former value if appropriate.
This procedure is used only for entries in the first four regions of |eqtb|,
i.e., only for entries that have |eq_type| and |equiv| fields.
After calling this routine, it is safe to put four more entries on
|save_stack|, provided that there was room for four more entries before
the call, since |eq_save| makes the necessary test.

@p procedure eq_define(@!p:pointer;@!t:quarterword;@!e:halfword);
  {new data for |eqtb|}
begin if eq_level(p)=cur_level then eq_destroy(eqtb[p])
else if cur_level>level_one then eq_save(p,eq_level(p));
eq_level(p):=cur_level; eq_type(p):=t; equiv(p):=e;
end;

@ The counterpart of |eq_define| for the remaining (fullword) positions in
|eqtb| is called |eq_word_define|. Since |xeq_level[p]>=level_one| for all
|p|, a `|restore_zero|' will never be used in this case.

@p procedure eq_word_define(@!p:pointer;@!w:integer);
begin if xeq_level[p]<>cur_level then
  begin eq_save(p,xeq_level[p]); xeq_level[p]:=cur_level;
  end;
eqtb[p].int:=w;
end;

@ The |eq_define| and |eq_word_define| routines take care of local definitions.
@^global definitions@>
Global definitions are done in almost the same way, but there is no need
to save old values, and the new value is associated with |level_one|.

@p procedure geq_define(@!p:pointer;@!t:quarterword;@!e:halfword);
  {global |eq_define|}
begin eq_destroy(eqtb[p]);
eq_level(p):=level_one; eq_type(p):=t; equiv(p):=e;
end;
@#
procedure geq_word_define(@!p:pointer;@!w:integer); {global |eq_word_define|}
begin eqtb[p].int:=w; xeq_level[p]:=level_one;
end;

@ Subroutine |save_for_after| puts a token on the stack for save-keeping.

@p procedure save_for_after(@!t:halfword);
begin if cur_level>level_one then
  begin check_full_save_stack;
  save_type(save_ptr):=insert_token; save_level(save_ptr):=level_zero;
  save_index(save_ptr):=t; incr(save_ptr);
  end;
end;

@ The |unsave| routine goes the other way, taking items off of |save_stack|.
This routine takes care of restoration when a level ends; everything
belonging to the topmost group is cleared off of the save stack.

@p@t\4@>@<Declare the procedure called |restore_trace|@>@;@/
procedure@?back_input; forward; @t\2@>
procedure unsave; {pops the top level off the save stack}
label done;
var p:pointer; {position to be restored}
@!l:quarterword; {saved level, if in fullword regions of |eqtb|}
@!t:halfword; {saved value of |cur_tok|}
begin if cur_level>level_one then
  begin decr(cur_level);
  @<Clear off top level from |save_stack|@>;
  end
else confusion("curlevel"); {|unsave| is not used when |cur_group=bottom_level|}
@:this can't happen curlevel}{\quad curlevel@>
end;

@ @<Clear off...@>=
loop@+begin decr(save_ptr);
  if save_type(save_ptr)=level_boundary then goto done;
  p:=save_index(save_ptr);
  if save_type(save_ptr)=insert_token then
    @<Insert token |p| into \TeX's input@>
  else  begin if save_type(save_ptr)=restore_old_value then
      begin l:=save_level(save_ptr); decr(save_ptr);
      end
    else save_stack[save_ptr]:=eqtb[undefined_control_sequence];
    @<Store \(s)|save_stack[save_ptr]| in |eqtb[p]|, unless
      |eqtb[p]| holds a global value@>;
    end;
  end;
done: cur_group:=save_level(save_ptr); cur_boundary:=save_index(save_ptr)

@ A global definition, which sets the level to |level_one|,
@^global definitions@>
will not be undone by |unsave|. If at least one global definition of
|eqtb[p]| has been carried out within the group that just ended, the
last such definition will therefore survive.

@<Store \(s)|save...@>=
if p<int_base then
  if eq_level(p)=level_one then
    begin eq_destroy(save_stack[save_ptr]); {destroy the saved value}
    @!stat if tracing_restores>0 then restore_trace(p,"retaining");@+tats@;@/
    end
  else  begin eq_destroy(eqtb[p]); {destroy the current value}
    eqtb[p]:=save_stack[save_ptr]; {restore the saved value}
    @!stat if tracing_restores>0 then restore_trace(p,"restoring");@+tats@;@/
    end
else if xeq_level[p]<>level_one then
  begin eqtb[p]:=save_stack[save_ptr]; xeq_level[p]:=l;
  @!stat if tracing_restores>0 then restore_trace(p,"restoring");@+tats@;@/
  end
else  begin
  @!stat if tracing_restores>0 then restore_trace(p,"retaining");@+tats@;@/
  end

@ @<Declare the procedure called |restore_trace|@>=
@!stat procedure restore_trace(@!p:pointer;@!s:str_number);
  {|eqtb[p]| has just been restored or retained}
begin begin_diagnostic; print_char("{"); print(s); print_char(" ");
show_eqtb(p); print_char("}");
end_diagnostic(false);
end;
tats

@ When looking for possible pointers to a memory location, it is helpful
to look for references from |eqtb| that might be waiting on the
save stack. Of course, we might find spurious pointers too; but this
routine is merely an aid when debugging, and at such times we are
grateful for any scraps of information, even if they prove to be irrelevant.
@^dirty \PASCAL@>

@<Search |save_stack| for equivalents that point to |p|@>=
if save_ptr>0 then for q:=0 to save_ptr-1 do
  begin if equiv_field(save_stack[q])=p then
    begin print_nl("SAVE("); print_int(q); print_char(")");
    end;
  end

@ Most of the parameters kept in |eqtb| can be changed freely, but there's
an exception:  The magnification should not be used with two different
values during any \TeX\ job, since a single magnification is applied to an
entire run. The global variable |mag_set| is set to the current magnification
whenever it becomes necessary to ``freeze'' it at a particular value.

@<Glob...@>=
@!mag_set:integer; {if nonzero, this magnification should be used henceforth}

@ @<Set init...@>=
mag_set:=0;

@ The |prepare_mag| subroutine is called whenever \TeX\ wants to use |mag|
for magnification.

@p procedure prepare_mag;
begin if (mag_set>0)and(mag<>mag_set) then
  begin print_err("Incompatible magnification ("); print_int(mag);
@.Incompatible magnification@>
  print(");"); print_nl(" the previous value will be retained");
  help2("I can handle only one magnification ratio per job. So I've")@/
  ("reverted to the magnification you used earlier on this run.");@/
  int_error(mag_set);
  geq_word_define(int_base+mag_code,mag_set); {|mag:=mag_set|}
  end;
if (mag<=0)or(mag>32768) then
  begin print_err("Illegal magnification has been changed to 1000");@/
@.Illegal magnification...@>
  help1("The magnification ratio must be between 1 and 32768.");
  int_error(mag); geq_word_define(int_base+mag_code,1000);
  end;
mag_set:=mag;
end;

@* \[20] Token lists.
A \TeX\ token is either a character or a control sequence, and it is
@^token@>
represented internally in one of two ways: (1)~A character whose ASCII
code number is |c| and whose command code is |m| is represented as the
number $2^8m+c$; the command code is in the range |1<=m<=14|. (2)~A control
sequence whose |eqtb| address is |p| is represented as the number
|cs_token_flag+p|. Here |cs_token_flag=@t$2^{12}-1$@>| is larger than
$2^8m+c$, yet it is small enough that |cs_token_flag+p< max_halfword|;
thus, a token fits comfortably in a halfword.

A token |t| represents a |left_brace| command if and only if
|t<left_brace_limit|; it represents a |right_brace| command if and only if
we have |left_brace_limit<=t<right_brace_limit|; and it represents a |match| or
|end_match| command if and only if |match_token<=t<=end_match_token|.
The following definitions take care of these token-oriented constants
and a few others.

@d cs_token_flag==@'7777 {amount added to the |eqtb| location in a
  token that stands for a control sequence; is a multiple of~256, less~1}
@d left_brace_token=@'0400 {$2^8\cdot|left_brace|$}
@d left_brace_limit=@'1000 {$2^8\cdot(|left_brace|+1)$}
@d right_brace_token=@'1000 {$2^8\cdot|right_brace|$}
@d right_brace_limit=@'1400 {$2^8\cdot(|right_brace|+1)$}
@d math_shift_token=@'1400 {$2^8\cdot|math_shift|$}
@d tab_token=@'2000 {$2^8\cdot|tab_mark|$}
@d out_param_token=@'2400 {$2^8\cdot|out_param|$}
@d space_token=@'5040 {$2^8\cdot|spacer|+|" "|$}
@d letter_token=@'5400 {$2^8\cdot|letter|$}
@d other_token=@'6000 {$2^8\cdot|other_char|$}
@d match_token=@'6400 {$2^8\cdot|match|$}
@d end_match_token=@'7000 {$2^8\cdot|end_match|$}

@ @<Check the ``constant''...@>=
if cs_token_flag+undefined_control_sequence>max_halfword then bad:=21;

@ A token list is a singly linked list of one-word nodes in |mem|, where
each word contains a token and a link. Macro definitions, output-routine
definitions, marks, \.{\\write} texts, and a few other things
are remembered by \TeX\ in the form
of token lists, usually preceded by a node with a reference count in its
|token_ref_count| field. The token stored in location |p| is called
|info(p)|.

Three special commands appear in the token lists of macro definitions.
When |m=match|, it means that \TeX\ should scan a parameter
for the current macro; when |m=end_match|, it means that parameter
matching should end and \TeX\ should start reading the macro text; and
when |m=out_param|, it means that \TeX\ should insert parameter
number |c| into the text at this point.

The enclosing \.{\char'173} and \.{\char'175} characters of a macro
definition are omitted, but the final right brace of an output routine
is included at the end of its token list.

Here is an example macro definition that illustrates these conventions.
After \TeX\ processes the text
$$\.{\\def\\mac a\#1\#2 \\b \{\#1\\-a \#\#1\#2 \#2\}}$$
the definition of \.{\\mac} is represented as a token list containing
$$\def\,{\hskip2pt}
\vbox{\halign{\hfil#\hfil\cr
(reference count), |letter|\,\.a, |match|\,\#, |match|\,\#, |spacer|\,\.\ ,
\.{\\b}, |end_match|,\cr
|out_param|\,1, \.{\\-}, |letter|\,\.a, |spacer|\,\.\ , |mac_param|\,\#,
|other_char|\,\.1,\cr
|out_param|\,2, |spacer|\,\.\ , |out_param|\,2.\cr}}$$
The procedure |scan_toks| builds such token lists, and |macro_call|
does the parameter matching.
@^reference counts@>

Examples such as
$$\.{\\def\\m\{\\def\\m\{a\}\ b\}}$$
explain why reference counts would be needed even if \TeX\ had no \.{\\let}
operation: When the token list for \.{\\m} is being read, the redefinition of
\.{\\m} changes the |eqtb| entry before the token list has been fully
consumed, so we dare not simply destroy a token list when its
control sequence is being redefined.

If the parameter-matching part of a definition ends with `\.{\#\{}',
the corresponding token list will have `\.\{' just before the `|end_match|'
and also at the very end. The first `\.\{' is used to delimit the parameter; the
second one keeps the first from disappearing.

@ The procedure |show_token_list|, which prints a symbolic form of
the token list that starts at a given node |p|, illustrates these
conventions. The token list being displayed should not begin with a reference
count. However, the procedure is intended to be robust, so that if the
memory links are awry or if |p| is not really a pointer to a token list,
nothing catastrophic will happen.

An additional parameter |q| is also given; this parameter is either null
or it points to a node in the token list where a certain magic computation
takes place that will be explained later. (Basically, |q| is non-null when
we are printing the two-line context information at the time of an error
message; |q| marks the place corresponding to where the second line
should begin.)

For example, if |p| points to the node containing the first \.a in the
token list above, then |show_token_list| will print the string
$$\hbox{`\.{a\#1\#2\ \\b\ ->\#1\\-a\ \#\#1\#2\ \#2}';}$$
and if |q| points to the node containing the second \.a,
the magic computation will be performed just before the second \.a is printed.

The generation will stop, and `\.{\\ETC.}' will be printed, if the length
of printing exceeds a given limit~|l|. Anomalous entries are printed in the
form of control sequences that are not followed by a blank space, e.g.,
`\.{\\BAD.}'; this cannot be confused with actual control sequences because
a real control sequence named \.{BAD} would come out `\.{\\BAD\ }'.

@<Declare the procedure called |show_token_list|@>=
procedure show_token_list(@!p,@!q:integer;@!l:integer);
label exit;
var m,@!c:integer; {pieces of a token}
@!match_chr:ASCII_code; {character used in a `|match|'}
@!n:ASCII_code; {the highest parameter number, as an ASCII digit}
begin match_chr:="#"; n:="0"; tally:=0;
while (p<>null) and (tally<l) do
  begin if p=q then @<Do magic computation@>;
  @<Display token |p|, and |return| if there are problems@>;
  p:=link(p);
  end;
if p<>null then print_esc("ETC.");
@.ETC@>
exit:
end;

@ @<Display token |p|...@>=
if (p<hi_mem_min) or (p>mem_end) then
  begin print_esc("CLOBBERED."); return;
@.CLOBBERED@>
  end;
if info(p)>=cs_token_flag then print_cs(info(p)-cs_token_flag)
else  begin m:=info(p) div @'400; c:=info(p) mod @'400;
  if info(p)<0 then print_esc("BAD.")
@.BAD@>
  else @<Display the token $(|m|,|c|)$@>;
  end

@ The procedure usually ``learns'' the character code used for macro
parameters by seeing one in a |match| command before it runs into any
|out_param| commands.

@<Display the token ...@>=
case m of
left_brace,right_brace,math_shift,tab_mark,sup_mark,sub_mark,spacer,
  letter,other_char: print(c);
mac_param: begin print(c); print(c);
  end;
out_param: begin print(match_chr);
  if c<=9 then print_char(c+"0")
  else  begin print_char("!"); return;
    end;
  end;
match: begin match_chr:=c; print(c); incr(n); print_char(n);
  if n>"9" then return;
  end;
end_match: print("->");
@.->@>
othercases print_esc("BAD.")
@.BAD@>
endcases

@ Here's the way we sometimes want to display a token list, given a pointer
to its reference count; the pointer may be null.

@p procedure token_show(@!p:pointer);
begin if p<>null then show_token_list(link(p),null,10000000);
end;

@ The |print_meaning| subroutine displays |cur_cmd| and |cur_chr| in
symbolic form, including the expansion of a macro or mark.

@p procedure print_meaning;
begin print_cmd_chr(cur_cmd,cur_chr);
if cur_cmd>=call then
  begin print_char(":"); print_ln; token_show(cur_chr);
  end
else if cur_cmd=top_bot_mark then
  begin print_char(":"); print_ln;
  token_show(cur_mark[cur_chr]);
  end;
end;

@* \[21] Introduction to the syntactic routines.
Let's pause a moment now and try to look at the Big Picture.
The \TeX\ program consists of three main parts: syntactic routines,
semantic routines, and output routines. The chief purpose of the
syntactic routines is to deliver the user's input to the semantic routines,
one token at a time. The semantic routines act as an interpreter
responding to these tokens, which may be regarded as commands. And the
output routines are periodically called on to convert box-and-glue
lists into a compact set of instructions that will be sent
to a typesetter. We have discussed the basic data structures and utility
routines of \TeX, so we are good and ready to plunge into the real activity by
considering the syntactic routines.

Our current goal is to come to grips with the |get_next| procedure,
which is the keystone of \TeX's input mechanism. Each call of |get_next|
sets the value of three variables |cur_cmd|, |cur_chr|, and |cur_cs|,
representing the next input token.
$$\vbox{\halign{#\hfil\cr
  \hbox{|cur_cmd| denotes a command code from the long list of codes
   given above;}\cr
  \hbox{|cur_chr| denotes a character code or other modifier of the command
   code;}\cr
  \hbox{|cur_cs| is the |eqtb| location of the current control sequence,}\cr
  \hbox{\qquad if the current token was a control sequence,
   otherwise it's zero.}\cr}}$$
Underlying this external behavior of |get_next| is all the machinery
necessary to convert from character files to tokens. At a given time we
may be only partially finished with the reading of several files (for
which \.{\\input} was specified), and partially finished with the expansion
of some user-defined macros and/or some macro parameters, and partially
finished with the generation of some text in a template for \.{\\halign},
and so on. When reading a character file, special characters must be
classified as math delimiters, etc.; comments and extra blank spaces must
be removed, paragraphs must be recognized, and control sequences must be
found in the hash table. Furthermore there are occasions in which the
scanning routines have looked ahead for a word like `\.{plus}' but only
part of that word was found, hence a few characters must be put back
into the input and scanned again.

To handle these situations, which might all be present simultaneously,
\TeX\ uses various stacks that hold information about the incomplete
activities, and there is a finite state control for each level of the
input mechanism. These stacks record the current state of an implicitly
recursive process, but the |get_next| procedure is not recursive.
Therefore it will not be difficult to translate these algorithms into
low-level languages that do not support recursion.

@<Glob...@>=
@!cur_cmd: eight_bits; {current command set by |get_next|}
@!cur_chr: halfword; {operand of current command}
@!cur_cs: pointer; {control sequence found here, zero if none found}
@!cur_tok: halfword; {packed representative of |cur_cmd| and |cur_chr|}

@ The |print_cmd_chr| routine prints a symbolic interpretation of a
command code and its modifier. This is used in certain `\.{You can\'t}'
error messages, and in the implementation of diagnostic routines like
\.{\\show}.

The body of |print_cmd_chr| is a rather tedious listing of print
commands, and most of it is essentially an inverse to the |primitive|
routine that enters a \TeX\ primitive into |eqtb|. Therefore much of
this procedure appears elsewhere in the program,
together with the corresponding |primitive| calls.

@d chr_cmd(#)==begin print(#); print_ASCII(chr_code);
  end

@<Declare the procedure called |print_cmd_chr|@>=
procedure print_cmd_chr(@!cmd:quarterword;@!chr_code:halfword);
begin case cmd of
left_brace: chr_cmd("begin-group character ");
right_brace: chr_cmd("end-group character ");
math_shift: chr_cmd("math shift character ");
mac_param: chr_cmd("macro parameter character ");
sup_mark: chr_cmd("superscript character ");
sub_mark: chr_cmd("subscript character ");
endv: print("end of alignment template");
spacer: chr_cmd("blank space ");
letter: chr_cmd("the letter ");
other_char: chr_cmd("the character ");
@t\4@>@<Cases of |print_cmd_chr| for symbolic printing of primitives@>@/
othercases print("[unknown command code!]")
endcases;
end;

@ Here is a procedure that displays the current command.

@p procedure show_cur_cmd_chr;
begin begin_diagnostic; print_nl("{");
if mode<>shown_mode then
  begin print_mode(mode); print(": "); shown_mode:=mode;
  end;
print_cmd_chr(cur_cmd,cur_chr); print_char("}");
end_diagnostic(false);
end;

@* \[22] Input stacks and states.
This implementation of
\TeX\ uses two different conventions for representing sequential stacks.
@^stack conventions@>@^conventions for representing stacks@>

\yskip\hangg 1) If there is frequent access to the top entry, and if the
stack is essentially never empty, then the top entry is kept in a global
variable (even better would be a machine register), and the other entries
appear in the array $\\{stack}[0\to(\\{ptr}-1)]$. For example, the
semantic stack described above is handled this way, and so is the input
stack that we are about to study.

\yskip\hangg 2) If there is infrequent top access, the entire stack contents
are in the array $\\{stack}[0\to(\\{ptr}-1)]$. For example, the |save_stack|
is treated this way, as we have seen.

\yskip\noindent
The state of \TeX's input mechanism appears in the input stack, whose
entries are records with six fields, called |state|, |index|, |start|, |loc|,
|limit|, and |name|. This stack is maintained with
convention~(1), so it is declared in the following way:

@<Types...@>=
@!in_state_record = record
  @!state_field, @!index_field: quarterword;
  @!start_field,@!loc_field, @!limit_field, @!name_field: halfword;
  end;

@ @<Glob...@>=
@!input_stack : array[0..stack_size] of in_state_record;
@!input_ptr : 0..stack_size; {first unused location of |input_stack|}
@!max_in_stack: 0..stack_size; {largest value of |input_ptr| when pushing}
@!cur_input : in_state_record;
  {the ``top'' input state, according to convention (1)}

@ We've already defined the special variable |loc==cur_input.loc_field|
in our discussion of basic input-output routines. The other components of
|cur_input| are defined in the same way:

@d state==cur_input.state_field {current scanner state}
@d index==cur_input.index_field {reference for buffer information}
@d start==cur_input.start_field {starting position in |buffer|}
@d limit==cur_input.limit_field {end of current line in |buffer|}
@d name==cur_input.name_field {name of the current file}

@ Let's look more closely now at the control variables
(|state|,~|index|,~|start|,~|loc|,~|limit|,~|name|),
assuming that \TeX\ is reading a line of characters that have been input
from some file or from the user's terminal. There is an array called
|buffer| that acts as a stack of all lines of characters that are
currently being read from files, including all lines on subsidiary
levels of the input stack that are not yet completed. \TeX\ will return to
the other lines when it is finished with the present input file.

(Incidentally, on a machine with byte-oriented addressing, it might be
appropriate to combine |buffer| with the |str_pool| array,
letting the buffer entries grow downward from the top of the string pool
and checking that these two tables don't bump into each other.)

The line we are currently working on begins in position |start| of the
buffer; the next character we are about to read is |buffer[loc]|; and
|limit| is the location of the last character present.  If |loc>limit|,
the line has been completely read. Usually |buffer[limit]| is the
|end_line_char|, denoting the end of a line, but this is not
true if the current line is an insertion that was entered on the user's
terminal in response to an error message.

The |name| variable is a string number that designates the name of
the current file, if we are reading a text file. It is zero if we
are reading from the terminal; it is |n+1| if we are reading from
input stream |n|, where |0<=n<=16|. (Input stream 16 stands for
an invalid stream number; in such cases the input is actually from
the terminal, under control of the procedure |read_toks|.)

The |state| variable has one of three values, when we are scanning such
files:
$$\baselineskip 15pt\vbox{\halign{#\hfil\cr
1) |state=mid_line| is the normal state.\cr
2) |state=skip_blanks| is like |mid_line|, but blanks are ignored.\cr
3) |state=new_line| is the state at the beginning of a line.\cr}}$$
These state values are assigned numeric codes so that if we add the state
code to the next character's command code, we get distinct values. For
example, `|mid_line+spacer|' stands for the case that a blank
space character occurs in the middle of a line when it is not being
ignored; after this case is processed, the next value of |state| will
be |skip_blanks|.

@d mid_line=1 {|state| code when scanning a line of characters}
@d skip_blanks=2+max_char_code {|state| code when ignoring blanks}
@d new_line=3+max_char_code+max_char_code {|state| code at start of line}

@ Additional information about the current line is available via the
|index| variable, which counts how many lines of characters are present
in the buffer below the current level. We have |index=0| when reading
from the terminal and prompting the user for each line; then if the user types,
e.g., `\.{\\input paper}', we will have |index=1| while reading
the file \.{paper.tex}. However, it does not follow that |index| is the
same as the input stack pointer, since many of the levels on the input
stack may come from token lists. For example, the instruction `\.{\\input
paper}' might occur in a token list.

The global variable |in_open| is equal to the |index|
value of the highest non-token-list level. Thus, the number of partially read
lines in the buffer is |in_open+1|, and we have |in_open=index|
when we are not reading a token list.

If we are not currently reading from the terminal, or from an input
stream, we are reading from the file variable |input_file[index]|. We use
the notation |terminal_input| as a convenient abbreviation for |name=0|,
and |cur_file| as an abbreviation for |input_file[index]|.

The global variable |line| contains the line number in the topmost
open file, for use in error messages. If we are not reading from
the terminal, |line_stack[index]| holds the line number for the
enclosing level, so that |line| can be restored when the current
file has been read. Line numbers should never be negative, since the
negative of the current line number is used to identify the user's output
routine in the |mode_line| field of the semantic nest entries.

If more information about the input state is needed, it can be
included in small arrays like those shown here. For example,
the current page or segment number in the input file might be
put into a variable |@!page|, maintained for enclosing levels in
`\ignorespaces|@!page_stack:array[1..max_in_open] of integer|\unskip'
by analogy with |line_stack|.
@^system dependencies@>

@d terminal_input==(name=0) {are we reading from the terminal?}
@d cur_file==input_file[index] {the current |alpha_file| variable}

@<Glob...@>=
@!in_open : 0..max_in_open; {the number of lines in the buffer, less one}
@!open_parens : 0..max_in_open; {the number of open text files}
@!input_file : array[1..max_in_open] of alpha_file;
@!line : integer; {current line number in the current source file}
@!line_stack : array[1..max_in_open] of integer;

@ Users of \TeX\ sometimes forget to balance left and right braces properly,
and one of the ways \TeX\ tries to spot such errors is by considering an
input file as broken into subfiles by control sequences that
are declared to be \.{\\outer}.

A variable called |scanner_status| tells \TeX\ whether or not to complain
when a subfile ends. This variable has six possible values:

\yskip\hang|normal|, means that a subfile can safely end here without incident.

\yskip\hang|skipping|, means that a subfile can safely end here, but not a file,
because we're reading past some conditional text that was not selected.

\yskip\hang|defining|, means that a subfile shouldn't end now because a
macro is being defined.

\yskip\hang|matching|, means that a subfile shouldn't end now because a
macro is being used and we are searching for the end of its arguments.

\yskip\hang|aligning|, means that a subfile shouldn't end now because we are
not finished with the preamble of an \.{\\halign} or \.{\\valign}.

\yskip\hang|absorbing|, means that a subfile shouldn't end now because we are
reading a balanced token list for \.{\\message}, \.{\\write}, etc.

\yskip\noindent
If the |scanner_status| is not |normal|, the variable |warning_index| points
to the |eqtb| location for the relevant control sequence name to print
in an error message.

@d skipping=1 {|scanner_status| when passing conditional text}
@d defining=2 {|scanner_status| when reading a macro definition}
@d matching=3 {|scanner_status| when reading macro arguments}
@d aligning=4 {|scanner_status| when reading an alignment preamble}
@d absorbing=5 {|scanner_status| when reading a balanced text}

@<Glob...@>=
@!scanner_status : normal..absorbing; {can a subfile end now?}
@!warning_index : pointer; {identifier relevant to non-|normal| scanner status}
@!def_ref : pointer; {reference count of token list being defined}

@ Here is a procedure that uses |scanner_status| to print a warning message
when a subfile has ended, and at certain other crucial times:

@<Declare the procedure called |runaway|@>=
procedure runaway;
var p:pointer; {head of runaway list}
begin if scanner_status>skipping then
  begin print_nl("Runaway ");
@.Runaway...@>
  case scanner_status of
  defining: begin print("definition"); p:=def_ref;
    end;
  matching: begin print("argument"); p:=temp_head;
    end;
  aligning: begin print("preamble"); p:=hold_head;
    end;
  absorbing: begin print("text"); p:=def_ref;
    end;
  end; {there are no other cases}
  print_char("?");print_ln; show_token_list(link(p),null,error_line-10);
  end;
end;

@ However, all this discussion about input state really applies only to the
case that we are inputting from a file. There is another important case,
namely when we are currently getting input from a token list. In this case
|state=token_list|, and the conventions about the other state variables
are different:

\yskip\hang|loc| is a pointer to the current node in the token list, i.e.,
the node that will be read next. If |loc=null|, the token list has been
fully read.

\yskip\hang|start| points to the first node of the token list; this node
may or may not contain a reference count, depending on the type of token
list involved.

\yskip\hang|token_type|, which takes the place of |index| in the
discussion above, is a code number that explains what kind of token list
is being scanned.

\yskip\hang|name| points to the |eqtb| address of the control sequence
being expanded, if the current token list is a macro.

\yskip\hang|param_start|, which takes the place of |limit|, tells where
the parameters of the current macro begin in the |param_stack|, if the
current token list is a macro.

\yskip\noindent The |token_type| can take several values, depending on
where the current token list came from:

\yskip\hang|parameter|, if a parameter is being scanned;

\hang|u_template|, if the \<u_j> part of an alignment
template is being scanned;

\hang|v_template|, if the \<v_j> part of an alignment
template is being scanned;

\hang|backed_up|, if the token list being scanned has been inserted as
`to be read again'.

\hang|inserted|, if the token list being scanned has been inserted as
the text expansion of a \.{\\count} or similar variable;

\hang|macro|, if a user-defined control sequence is being scanned;

\hang|output_text|, if an \.{\\output} routine is being scanned;

\hang|every_par_text|, if the text of \.{\\everypar} is being scanned;

\hang|every_math_text|, if the text of \.{\\everymath} is being scanned;

\hang|every_display_text|, if the text of \.{\\everydisplay} is being scanned;

\hang|every_hbox_text|, if the text of \.{\\everyhbox} is being scanned;

\hang|every_vbox_text|, if the text of \.{\\everyvbox} is being scanned;

\hang|every_job_text|, if the text of \.{\\everyjob} is being scanned;

\hang|every_cr_text|, if the text of \.{\\everycr} is being scanned;

\hang|mark_text|, if the text of a \.{\\mark} is being scanned;

\hang|write_text|, if the text of a \.{\\write} is being scanned.

\yskip\noindent
The codes for |output_text|, |every_par_text|, etc., are equal to a constant
plus the corresponding codes for token list parameters |output_routine_loc|,
|every_par_loc|, etc.  The token list begins with a reference count if and
only if |token_type>=macro|.
@^reference counts@>

@d token_list=0 {|state| code when scanning a token list}
@d token_type==index {type of current token list}
@d param_start==limit {base of macro parameters in |param_stack|}
@d parameter=0 {|token_type| code for parameter}
@d u_template=1 {|token_type| code for \<u_j> template}
@d v_template=2 {|token_type| code for \<v_j> template}
@d backed_up=3 {|token_type| code for text to be reread}
@d inserted=4 {|token_type| code for inserted texts}
@d macro=5 {|token_type| code for defined control sequences}
@d output_text=6 {|token_type| code for output routines}
@d every_par_text=7 {|token_type| code for \.{\\everypar}}
@d every_math_text=8 {|token_type| code for \.{\\everymath}}
@d every_display_text=9 {|token_type| code for \.{\\everydisplay}}
@d every_hbox_text=10 {|token_type| code for \.{\\everyhbox}}
@d every_vbox_text=11 {|token_type| code for \.{\\everyvbox}}
@d every_job_text=12 {|token_type| code for \.{\\everyjob}}
@d every_cr_text=13 {|token_type| code for \.{\\everycr}}
@d mark_text=14 {|token_type| code for \.{\\topmark}, etc.}
@d write_text=15 {|token_type| code for \.{\\write}}

@ The |param_stack| is an auxiliary array used to hold pointers to the token
lists for parameters at the current level and subsidiary levels of input.
This stack is maintained with convention (2), and it grows at a different
rate from the others.

@<Glob...@>=
@!param_stack:array [0..param_size] of pointer;
  {token list pointers for parameters}
@!param_ptr:0..param_size; {first unused entry in |param_stack|}
@!max_param_stack:integer;
  {largest value of |param_ptr|, will be |<=param_size+9|}

@ The input routines must also interact with the processing of
\.{\\halign} and \.{\\valign}, since the appearance of tab marks and
\.{\\cr} in certain places is supposed to trigger the beginning of special
\<v_j> template text in the scanner. This magic is accomplished by an
|align_state| variable that is increased by~1 when a `\.{\char'173}' is
scanned and decreased by~1 when a `\.{\char'175}' is scanned. The |align_state|
is nonzero during the \<u_j> template, after which it is set to zero; the
\<v_j> template begins when a tab mark or \.{\\cr} occurs at a time that
|align_state=0|.

@<Glob...@>=
@!align_state:integer; {group level with respect to current alignment}

@ Thus, the ``current input state'' can be very complicated indeed; there
can be many levels and each level can arise in a variety of ways. The
|show_context| procedure, which is used by \TeX's error-reporting routine to
print out the current input state on all levels down to the most recent
line of characters from an input file, illustrates most of these conventions.
The global variable |base_ptr| contains the lowest level that was
displayed by this procedure.

@<Glob...@>=
@!base_ptr:0..stack_size; {shallowest level shown by |show_context|}

@ The status at each level is indicated by printing two lines, where the first
line indicates what was read so far and the second line shows what remains
to be read. The context is cropped, if necessary, so that the first line
contains at most |half_error_line| characters, and the second contains
at most |error_line|. Non-current input levels whose |token_type| is
`|backed_up|' are shown only if they have not been fully read.

@p procedure show_context; {prints where the scanner is}
label done;
var old_setting:0..max_selector; {saved |selector| setting}
@!nn:integer; {number of contexts shown so far, less one}
@!bottom_line:boolean; {have we reached the final context to be shown?}
@<Local variables for formatting calculations@>@/
begin base_ptr:=input_ptr; input_stack[base_ptr]:=cur_input;
  {store current state}
nn:=-1; bottom_line:=false;
loop@+begin cur_input:=input_stack[base_ptr]; {enter into the context}
  if (state<>token_list) then
    if (name>17) or (base_ptr=0) then bottom_line:=true;
  if (base_ptr=input_ptr)or bottom_line or(nn<error_context_lines) then
    @<Display the current context@>
  else if nn=error_context_lines then
    begin print_nl("..."); incr(nn); {omitted if |error_context_lines<0|}
    end;
  if bottom_line then goto done;
  decr(base_ptr);
  end;
done: cur_input:=input_stack[input_ptr]; {restore original state}
end;

@ @<Display the current context@>=
begin if (base_ptr=input_ptr) or (state<>token_list) or
   (token_type<>backed_up) or (loc<>null) then
    {we omit backed-up token lists that have already been read}
  begin tally:=0; {get ready to count characters}
  old_setting:=selector;
  if state<>token_list then
    begin @<Print location of current line@>;
    @<Pseudoprint the line@>;
    end
  else  begin @<Print type of token list@>;
    @<Pseudoprint the token list@>;
    end;
  selector:=old_setting; {stop pseudoprinting}
  @<Print two lines using the tricky pseudoprinted information@>;
  incr(nn);
  end;
end

@ This routine should be changed, if necessary, to give the best possible
indication of where the current line resides in the input file.
For example, on some systems it is best to print both a page and line number.
@^system dependencies@>

@<Print location of current line@>=
if name<=17 then
  if terminal_input then
    if base_ptr=0 then print_nl("<*>") else print_nl("<insert> ")
  else  begin print_nl("<read ");
    if name=17 then print_char("*")@+else print_int(name-1);
@.*\relax@>
    print_char(">");
    end
else  begin print_nl("l."); print_int(line);
  end;
print_char(" ")

@ @<Print type of token list@>=
case token_type of
parameter: print_nl("<argument> ");
u_template,v_template: print_nl("<template> ");
backed_up: if loc=null then print_nl("<recently read> ")
  else print_nl("<to be read again> ");
inserted: print_nl("<inserted text> ");
macro: begin print_ln; print_cs(name);
  end;
output_text: print_nl("<output> ");
every_par_text: print_nl("<everypar> ");
every_math_text: print_nl("<everymath> ");
every_display_text: print_nl("<everydisplay> ");
every_hbox_text: print_nl("<everyhbox> ");
every_vbox_text: print_nl("<everyvbox> ");
every_job_text: print_nl("<everyjob> ");
every_cr_text: print_nl("<everycr> ");
mark_text: print_nl("<mark> ");
write_text: print_nl("<write> ");
othercases print_nl("?") {this should never happen}
endcases

@ Here it is necessary to explain a little trick. We don't want to store a long
string that corresponds to a token list, because that string might take up
lots of memory; and we are printing during a time when an error message is
being given, so we dare not do anything that might overflow one of \TeX's
tables. So `pseudoprinting' is the answer: We enter a mode of printing
that stores characters into a buffer of length |error_line|, where character
$k+1$ is placed into \hbox{|trick_buf[k mod error_line]|} if
|k<trick_count|, otherwise character |k| is dropped. Initially we set
|tally:=0| and |trick_count:=1000000|; then when we reach the
point where transition from line 1 to line 2 should occur, we
set |first_count:=tally| and |trick_count:=@tmax@>(error_line,
tally+1+error_line-half_error_line)|. At the end of the
pseudoprinting, the values of |first_count|, |tally|, and
|trick_count| give us all the information we need to print the two lines,
and all of the necessary text is in |trick_buf|.

Namely, let |l| be the length of the descriptive information that appears
on the first line. The length of the context information gathered for that
line is |k=first_count|, and the length of the context information
gathered for line~2 is $m=\min(|tally|, |trick_count|)-k$. If |l+k<=h|,
where |h=half_error_line|, we print |trick_buf[0..k-1]| after the
descriptive information on line~1, and set |n:=l+k|; here |n| is the
length of line~1. If $l+k>h$, some cropping is necessary, so we set |n:=h|
and print `\.{...}' followed by
$$\hbox{|trick_buf[(l+k-h+3)..k-1]|,}$$
where subscripts of |trick_buf| are circular modulo |error_line|. The
second line consists of |n|~spaces followed by |trick_buf[k..(k+m-1)]|,
unless |n+m>error_line|; in the latter case, further cropping is done.
This is easier to program than to explain.

@<Local variables for formatting...@>=
@!i:0..buf_size; {index into |buffer|}
@!j:0..buf_size; {end of current line in |buffer|}
@!l:0..half_error_line; {length of descriptive information on line 1}
@!m:integer; {context information gathered for line 2}
@!n:0..error_line; {length of line 1}
@!p: integer; {starting or ending place in |trick_buf|}
@!q: integer; {temporary index}

@ The following code sets up the print routines so that they will gather
the desired information.

@d begin_pseudoprint==
  begin l:=tally; tally:=0; selector:=pseudo;
  trick_count:=1000000;
  end
@d set_trick_count==
  begin first_count:=tally;
  trick_count:=tally+1+error_line-half_error_line;
  if trick_count<error_line then trick_count:=error_line;
  end

@ And the following code uses the information after it has been gathered.

@<Print two lines using the tricky pseudoprinted information@>=
if trick_count=1000000 then set_trick_count;
  {|set_trick_count| must be performed}
if tally<trick_count then m:=tally-first_count
else m:=trick_count-first_count; {context on line 2}
if l+first_count<=half_error_line then
  begin p:=0; n:=l+first_count;
  end
else  begin print("..."); p:=l+first_count-half_error_line+3;
  n:=half_error_line;
  end;
for q:=p to first_count-1 do print_char(trick_buf[q mod error_line]);
print_ln;
for q:=1 to n do print_char(" "); {print |n| spaces to begin line~2}
if m+n<=error_line then p:=first_count+m else p:=first_count+(error_line-n-3);
for q:=first_count to p-1 do print_char(trick_buf[q mod error_line]);
if m+n>error_line then print("...")

@ But the trick is distracting us from our current goal, which is to
understand the input state. So let's concentrate on the data structures that
are being pseudoprinted as we finish up the |show_context| procedure.

@<Pseudoprint the line@>=
begin_pseudoprint;
if buffer[limit]=end_line_char then j:=limit
else j:=limit+1; {determine the effective end of the line}
if j>0 then for i:=start to j-1 do
  begin if i=loc then set_trick_count;
  print(buffer[i]);
  end

@ @<Pseudoprint the token list@>=
begin_pseudoprint;
if token_type<macro then show_token_list(start,loc,100000)
else show_token_list(link(start),loc,100000) {avoid reference count}

@ Here is the missing piece of |show_token_list| that is activated when the
token beginning line~2 is about to be shown:

@<Do magic computation@>=set_trick_count

@* \[23] Maintaining the input stacks.
The following subroutines change the input status in commonly needed ways.

First comes |push_input|, which stores the current state and creates a
new level (having, initially, the same properties as the old).

@d push_input==@t@> {enter a new input level, save the old}
  begin if input_ptr>max_in_stack then
    begin max_in_stack:=input_ptr;
    if input_ptr=stack_size then overflow("input stack size",stack_size);
@:TeX capacity exceeded input stack size}{\quad input stack size@>
    end;
  input_stack[input_ptr]:=cur_input; {stack the record}
  incr(input_ptr);
  end

@ And of course what goes up must come down.

@d pop_input==@t@> {leave an input level, re-enter the old}
  begin decr(input_ptr); cur_input:=input_stack[input_ptr];
  end

@ Here is a procedure that starts a new level of token-list input, given
a token list |p| and its type |t|. If |t=macro|, the calling routine should
set |name| and |loc|.

@d back_list(#)==begin_token_list(#,backed_up) {backs up a simple token list}
@d ins_list(#)==begin_token_list(#,inserted) {inserts a simple token list}

@p procedure begin_token_list(@!p:pointer;@!t:quarterword);
begin push_input; state:=token_list; start:=p; token_type:=t;
if t>=macro then {the token list starts with a reference count}
  begin add_token_ref(p);
  if t=macro then param_start:=param_ptr
  else  begin loc:=link(p);
    if tracing_macros>1 then
      begin begin_diagnostic; print_nl("");
      case t of
      mark_text:print_esc("mark");
      write_text:print_esc("write");
      othercases print_cmd_chr(assign_toks,t-output_text+output_routine_loc)
      endcases;@/
      print("->"); token_show(p); end_diagnostic(false);
      end;
    end;
  end
else loc:=p;
end;

@ When a token list has been fully scanned, the following computations
should be done as we leave that level of input. The |token_type| tends
to be equal to either |backed_up| or |inserted| about 2/3 of the time.
@^inner loop@>

@p procedure end_token_list; {leave a token-list input level}
begin if token_type>=backed_up then {token list to be deleted}
  begin if token_type<=inserted then flush_list(start)
  else  begin delete_token_ref(start); {update reference count}
    if token_type=macro then {parameters must be flushed}
      while param_ptr>param_start do
        begin decr(param_ptr);
        flush_list(param_stack[param_ptr]);
        end;
    end;
  end
else if token_type=u_template then
  if align_state>500000 then align_state:=0
  else fatal_error("(interwoven alignment preambles are not allowed)");
@.interwoven alignment preambles...@>
pop_input;
check_interrupt;
end;

@ Sometimes \TeX\ has read too far and wants to ``unscan'' what it has
seen. The |back_input| procedure takes care of this by putting the token
just scanned back into the input stream, ready to be read again. This
procedure can be used only if |cur_tok| represents the token to be
replaced. Some applications of \TeX\ use this procedure a lot,
so it has been slightly optimized for speed.
@^inner loop@>

@p procedure back_input; {undoes one token of input}
var p:pointer; {a token list of length one}
begin while (state=token_list)and(loc=null)and(token_type<>v_template) do
  end_token_list; {conserve stack space}
p:=get_avail; info(p):=cur_tok;
if cur_tok<right_brace_limit then
  if cur_tok<left_brace_limit then decr(align_state)
  else incr(align_state);
push_input; state:=token_list; start:=p; token_type:=backed_up;
loc:=p; {that was |back_list(p)|, without procedure overhead}
end;

@ @<Insert token |p| into \TeX's input@>=
begin t:=cur_tok; cur_tok:=p; back_input; cur_tok:=t;
end

@ The |back_error| routine is used when we want to replace an offending token
just before issuing an error message. This routine, like |back_input|,
requires that |cur_tok| has been set. We disable interrupts during the
call of |back_input| so that the help message won't be lost.

@p procedure back_error; {back up one token and call |error|}
begin OK_to_interrupt:=false; back_input; OK_to_interrupt:=true; error;
end;
@#
procedure ins_error; {back up one inserted token and call |error|}
begin OK_to_interrupt:=false; back_input; token_type:=inserted;
OK_to_interrupt:=true; error;
end;

@ The |begin_file_reading| procedure starts a new level of input for lines
of characters to be read from a file, or as an insertion from the
terminal. It does not take care of opening the file, nor does it set |loc|
or |limit| or |line|.
@^system dependencies@>

@p procedure begin_file_reading;
begin if in_open=max_in_open then overflow("text input levels",max_in_open);
@:TeX capacity exceeded text input levels}{\quad text input levels@>
if first=buf_size then overflow("buffer size",buf_size);
@:TeX capacity exceeded buffer size}{\quad buffer size@>
incr(in_open); push_input; index:=in_open;
line_stack[index]:=line; start:=first; state:=mid_line;
name:=0; {|terminal_input| is now |true|}
end;

@ Conversely, the variables must be downdated when such a level of input
is finished:

@p procedure end_file_reading;
begin first:=start; line:=line_stack[index];
if name>17 then a_close(cur_file); {forget it}
pop_input; decr(in_open);
end;

@ In order to keep the stack from overflowing during a long sequence of
inserted `\.{\\show}' commands, the following routine removes completed
error-inserted lines from memory.

@p procedure clear_for_error_prompt;
begin while (state<>token_list)and terminal_input and@|
  (input_ptr>0)and(loc>limit) do end_file_reading;
print_ln; clear_terminal;
end;

@ To get \TeX's whole input mechanism going, we perform the following
actions.

@<Initialize the input routines@>=
begin input_ptr:=0; max_in_stack:=0;
in_open:=0; open_parens:=0; max_buf_stack:=0;
param_ptr:=0; max_param_stack:=0;
first:=buf_size; repeat buffer[first]:=0; decr(first); until first=0;
scanner_status:=normal; warning_index:=null; first:=1;
state:=new_line; start:=1; index:=0; line:=0; name:=0;
force_eof:=false;
align_state:=1000000;@/
if not init_terminal then goto final_end;
limit:=last; first:=last+1; {|init_terminal| has set |loc| and |last|}
end

@* \[24] Getting the next token.
The heart of \TeX's input mechanism is the |get_next| procedure, which
we shall develop in the next few sections of the program. Perhaps we
shouldn't actually call it the ``heart,'' however, because it really acts
as \TeX's eyes and mouth, reading the source files and gobbling them up.
And it also helps \TeX\ to regurgitate stored token lists that are to be
processed again.
@^eyes and mouth@>

The main duty of |get_next| is to input one token and to set |cur_cmd|
and |cur_chr| to that token's command code and modifier. Furthermore, if
the input token is a control sequence, the |eqtb| location of that control
sequence is stored in |cur_cs|; otherwise |cur_cs| is set to zero.

Underlying this simple description is a certain amount of complexity
because of all the cases that need to be handled.
However, the inner loop of |get_next| is reasonably short and fast.

When |get_next| is asked to get the next token of a \.{\\read} line,
it sets |cur_cmd=cur_chr=cur_cs=0| in the case that no more tokens
appear on that line. (There might not be any tokens at all, if the
|end_line_char| has |ignore| as its catcode.)

@ The value of |par_loc| is the |eqtb| address of `\.{\\par}'. This quantity
is needed because a blank line of input is supposed to be exactly equivalent
to the appearance of \.{\\par}; we must set |cur_cs:=par_loc|
when detecting a blank line.

@<Glob...@>=
@!par_loc:pointer; {location of `\.{\\par}' in |eqtb|}
@!par_token:halfword; {token representing `\.{\\par}'}

@ @<Put each...@>=
primitive("par",par_end,256); {cf. |scan_file_name|}
@!@:par_}{\.{\\par} primitive@>
par_loc:=cur_val; par_token:=cs_token_flag+par_loc;

@ @<Cases of |print_cmd_chr|...@>=
par_end:print_esc("par");

@ Before getting into |get_next|, let's consider the subroutine that
is called when an `\.{\\outer}' control sequence has been scanned or
when the end of a file has been reached. These two cases are distinguished
by |cur_cs|, which is zero at the end of a file.

@p procedure check_outer_validity;
var p:pointer; {points to inserted token list}
@!q:pointer; {auxiliary pointer}
begin if scanner_status<>normal then
  begin deletions_allowed:=false;
  @<Back up an outer control sequence so that it can be reread@>;
  if scanner_status>skipping then
    @<Tell the user what has run away and try to recover@>
  else  begin print_err("Incomplete "); print_cmd_chr(if_test,cur_if);
@.Incomplete \\if...@>
    print("; all text was ignored after line "); print_int(skip_line);
    help3("A forbidden control sequence occurred in skipped text.")@/
    ("This kind of error happens when you say `\if...' and forget")@/
    ("the matching `\fi'. I've inserted a `\fi'; this might work.");
    if cur_cs<>0 then cur_cs:=0
    else help_line[2]:=@|
      "The file ended while I was skipping conditional text.";
    cur_tok:=cs_token_flag+frozen_fi; ins_error;
    end;
  deletions_allowed:=true;
  end;
end;

@ An outer control sequence that occurs in a \.{\\read} will not be reread,
since the error recovery for \.{\\read} is not very powerful.

@<Back up an outer control sequence so that it can be reread@>=
if cur_cs<>0 then
  begin if (state=token_list)or(name<1)or(name>17) then
    begin p:=get_avail; info(p):=cs_token_flag+cur_cs;
    back_list(p); {prepare to read the control sequence again}
    end;
  cur_cmd:=spacer; cur_chr:=" "; {replace it by a space}
  end

@ @<Tell the user what has run away...@>=
begin runaway; {print a definition, argument, or preamble}
if cur_cs=0 then print_err("File ended")
@.File ended while scanning...@>
else  begin cur_cs:=0; print_err("Forbidden control sequence found");
@.Forbidden control sequence...@>
  end;
print(" while scanning ");
@<Print either `\.{definition}' or `\.{use}' or `\.{preamble}' or `\.{text}',
  and insert tokens that should lead to recovery@>;
print(" of "); sprint_cs(warning_index);
help4("I suspect you have forgotten a `}', causing me")@/
("to read past where you wanted me to stop.")@/
("I'll try to recover; but if the error is serious,")@/
("you'd better type `E' or `X' now and fix your file.");@/
error;
end

@ The recovery procedure can't be fully understood without knowing more
about the \TeX\ routines that should be aborted, but we can sketch the
ideas here:  For a runaway definition we will insert a right brace; for a
runaway preamble, we will insert a special \.{\\cr} token and a right
brace; and for a runaway argument, we will set |long_state| to
|outer_call| and insert \.{\\par}.

@<Print either `\.{definition}' or ...@>=
p:=get_avail;
case scanner_status of
defining:begin print("definition"); info(p):=right_brace_token+"}";
  end;
matching:begin print("use"); info(p):=par_token; long_state:=outer_call;
  end;
aligning:begin print("preamble"); info(p):=right_brace_token+"}"; q:=p;
  p:=get_avail; link(p):=q; info(p):=cs_token_flag+frozen_cr;
  align_state:=-1000000;
  end;
absorbing:begin print("text"); info(p):=right_brace_token+"}";
  end;
end; {there are no other cases}
ins_list(p)

@ We need to mention a procedure here that may be called by |get_next|.

@p procedure@?firm_up_the_line; forward;

@ Now we're ready to take the plunge into |get_next| itself. Parts of
this routine are executed more often than any other instructions of \TeX.
@^mastication@>@^inner loop@>

@d switch=25 {a label in |get_next|}
@d start_cs=26 {another}

@p procedure get_next; {sets |cur_cmd|, |cur_chr|, |cur_cs| to next token}
label restart, {go here to get the next input token}
  switch, {go here to eat the next character from a file}
  reswitch, {go here to digest it again}
  start_cs, {go here to start looking for a control sequence}
  found, {go here when a control sequence has been found}
  exit; {go here when the next input token has been got}
var k:0..buf_size; {an index into |buffer|}
@!t:halfword; {a token}
@!cat:0..15; {|cat_code(cur_chr)|, usually}
@!c,@!cc:ASCII_code; {constituents of a possible expanded code}
@!d:2..3; {number of excess characters in an expanded code}
begin restart: cur_cs:=0;
if state<>token_list then
@<Input from external file, |goto restart| if no input found@>
else @<Input from token list, |goto restart| if end of list or
  if a parameter needs to be expanded@>;
@<If an alignment entry has just ended, take appropriate action@>;
exit:end;

@ An alignment entry ends when a tab or \.{\\cr} occurs, provided that the
current level of braces is the same as the level that was present at the
beginning of that alignment entry; i.e., provided that |align_state| has
returned to the value it had after the \<u_j> template for that entry.
@^inner loop@>

@<If an alignment entry has just ended, take appropriate action@>=
if cur_cmd<=car_ret then if cur_cmd>=tab_mark then if align_state=0 then
  @<Insert the \(v)\<v_j> template and |goto restart|@>

@ @<Input from external file, |goto restart| if no input found@>=
@^inner loop@>
begin switch: if loc<=limit then {current line not yet finished}
  begin cur_chr:=buffer[loc]; incr(loc);
  reswitch: cur_cmd:=cat_code(cur_chr);
  @<Change state if necessary, and |goto switch| if the
    current character should be ignored,
    or |goto reswitch| if the current character
    changes to another@>;
  end
else  begin state:=new_line;@/
  @<Move to next line of file,
    or |goto restart| if there is no next line,
    or |return| if a \.{\\read} line has finished@>;
  check_interrupt;
  goto switch;
  end;
end

@ The following 48-way switch accomplishes the scanning quickly, assuming
that a decent \PASCAL\ compiler has translated the code. Note that the numeric
values for |mid_line|, |skip_blanks|, and |new_line| are spaced
apart from each other by |max_char_code+1|, so we can add a character's
command code to the state to get a single number that characterizes both.

@d any_state_plus(#) == mid_line+#,skip_blanks+#,new_line+#

@<Change state if necessary...@>=
case state+cur_cmd of
@<Cases where character is ignored@>: goto switch;
any_state_plus(escape): @<Scan a control sequence
  and set |state:=skip_blanks| or |mid_line|@>;
any_state_plus(active_char): @<Process an active-character control sequence
  and set |state:=mid_line|@>;
any_state_plus(sup_mark): @<If this |sup_mark| starts an expanded character
  like~\.{\^\^A} or~\.{\^\^df}, then |goto reswitch|,
  otherwise set |state:=mid_line|@>;
any_state_plus(invalid_char): @<Decry the invalid character and
  |goto restart|@>;
@t\4@>@<Handle situations involving spaces, braces, changes of state@>@;
othercases do_nothing
endcases

@ @<Cases where character is ignored@>=
any_state_plus(ignore),skip_blanks+spacer,new_line+spacer

@ We go to |restart| instead of to |switch|, because |state| might equal
|token_list| after the error has been dealt with
(cf.\ |clear_for_error_prompt|).

@<Decry the invalid...@>=
begin print_err("Text line contains an invalid character");
@.Text line contains...@>
help2("A funny symbol that I can't read has just been input.")@/
("Continue, and I'll forget that it ever happened.");@/
deletions_allowed:=false; error; deletions_allowed:=true;
goto restart;
end

@ @d add_delims_to(#)==#+math_shift,#+tab_mark,#+mac_param,
  #+sub_mark,#+letter,#+other_char

@<Handle situations involving spaces, braces, changes of state@>=
mid_line+spacer:@<Enter |skip_blanks| state, emit a space@>;
mid_line+car_ret:@<Finish line, emit a space@>;
skip_blanks+car_ret,any_state_plus(comment):
  @<Finish line, |goto switch|@>;
new_line+car_ret:@<Finish line, emit a \.{\\par}@>;
mid_line+left_brace: incr(align_state);
skip_blanks+left_brace,new_line+left_brace: begin
  state:=mid_line; incr(align_state);
  end;
mid_line+right_brace: decr(align_state);
skip_blanks+right_brace,new_line+right_brace: begin
  state:=mid_line; decr(align_state);
  end;
add_delims_to(skip_blanks),add_delims_to(new_line): state:=mid_line;

@ When a character of type |spacer| gets through, its character code is
changed to $\.{"\ "}=@'40$. This means that the ASCII codes for tab and space,
and for the space inserted at the end of a line, will
be treated alike when macro parameters are being matched. We do this
since such characters are indistinguishable on most computer terminal displays.

@<Finish line, emit a space@>=
begin loc:=limit+1; cur_cmd:=spacer; cur_chr:=" ";
end

@ The following code is performed only when |cur_cmd=spacer|.

@<Enter |skip_blanks| state, emit a space@>=
begin state:=skip_blanks; cur_chr:=" ";
end

@ @<Finish line, |goto switch|@>=
begin loc:=limit+1; goto switch;
end

@ @<Finish line, emit a \.{\\par}@>=
begin loc:=limit+1; cur_cs:=par_loc; cur_cmd:=eq_type(cur_cs);
cur_chr:=equiv(cur_cs);
if cur_cmd>=outer_call then check_outer_validity;
end

@ Notice that a code like \.{\^\^8} becomes \.x if not followed by a hex digit.
 
@d is_hex(#)==(((#>="0")and(#<="9"))or((#>="a")and(#<="f")))
@d hex_to_cur_chr==
  if c<="9" then cur_chr:=c-"0" @+else cur_chr:=c-"a"+10;
  if cc<="9" then cur_chr:=16*cur_chr+cc-"0"
  else cur_chr:=16*cur_chr+cc-"a"+10

@<If this |sup_mark| starts an expanded character...@>=
begin if cur_chr=buffer[loc] then if loc<limit then
  begin c:=buffer[loc+1]; @+if c<@'200 then {yes we have an expanded char}
    begin loc:=loc+2; 
    if is_hex(c) then if loc<=limit then
      begin cc:=buffer[loc]; @+if is_hex(cc) then
        begin incr(loc); hex_to_cur_chr; goto reswitch;
        end;
      end;
    if c<@'100 then cur_chr:=c+@'100 @+else cur_chr:=c-@'100;
    goto reswitch;
    end;
  end;
state:=mid_line;
end

@ @<Process an active-character...@>=
begin cur_cs:=cur_chr+active_base;
cur_cmd:=eq_type(cur_cs); cur_chr:=equiv(cur_cs); state:=mid_line;
if cur_cmd>=outer_call then check_outer_validity;
end

@ Control sequence names are scanned only when they appear in some line of
a file; once they have been scanned the first time, their |eqtb| location
serves as a unique identification, so \TeX\ doesn't need to refer to the
original name any more except when it prints the equivalent in symbolic form.

The program that scans a control sequence has been written carefully
in order to avoid the blowups that might otherwise occur if a malicious
user tried something like `\.{\\catcode\'15=0}'. The algorithm might
look at |buffer[limit+1]|, but it never looks at |buffer[limit+2]|.

If expanded characters like `\.{\^\^A}' or `\.{\^\^df}'
appear in or just following
a control sequence name, they are converted to single characters in the
buffer and the process is repeated, slowly but surely.

@<Scan a control...@>=
begin if loc>limit then cur_cs:=null_cs {|state| is irrelevant in this case}
else  begin start_cs: k:=loc; cur_chr:=buffer[k]; cat:=cat_code(cur_chr);
  incr(k);
  if cat=letter then state:=skip_blanks
  else if cat=spacer then state:=skip_blanks
  else state:=mid_line;
  if (cat=letter)and(k<=limit) then
    @<Scan ahead in the buffer until finding a nonletter;
    if an expanded code is encountered, reduce it
    and |goto start_cs|; otherwise if a multiletter control
    sequence is found, adjust |cur_cs| and |loc|, and
    |goto found|@>
  else @<If an expanded code is present, reduce it and |goto start_cs|@>;
  cur_cs:=single_base+buffer[loc]; incr(loc);
  end;
found: cur_cmd:=eq_type(cur_cs); cur_chr:=equiv(cur_cs);
if cur_cmd>=outer_call then check_outer_validity;
end

@ Whenever we reach the following piece of code, we will have
|cur_chr=buffer[k-1]| and |k<=limit+1| and |cat=cat_code(cur_chr)|. If an
expanded code like \.{\^\^A} or \.{\^\^df} appears in |buffer[(k-1)..(k+1)]|
or |buffer[(k-1)..(k+2)]|, we
will store the corresponding code in |buffer[k-1]| and shift the rest of
the buffer left two or three places.

@<If an expanded...@>=
begin if buffer[k]=cur_chr then @+if cat=sup_mark then @+if k<limit then
  begin c:=buffer[k+1]; @+if c<@'200 then {yes, one is indeed present}
    begin d:=2;
    if is_hex(c) then @+if k+2<=limit then
      begin cc:=buffer[k+2]; @+if is_hex(cc) then incr(d);
      end;
    if d>2 then
      begin hex_to_cur_chr; buffer[k-1]:=cur_chr;
      end
    else if c<@'100 then buffer[k-1]:=c+@'100
    else buffer[k-1]:=c-@'100;
    limit:=limit-d; first:=first-d;
    while k<=limit do
      begin buffer[k]:=buffer[k+d]; incr(k);
      end;
    goto start_cs;
    end;
  end;
end

@ @<Scan ahead in the buffer...@>=
begin repeat cur_chr:=buffer[k]; cat:=cat_code(cur_chr); incr(k);
until (cat<>letter)or(k>limit);
@<If an expanded...@>;
if cat<>letter then decr(k);
  {now |k| points to first nonletter}
if k>loc+1 then {multiletter control sequence has been scanned}
  begin cur_cs:=id_lookup(loc,k-loc); loc:=k; goto found;
  end;
end

@ Let's consider now what happens when |get_next| is looking at a token list.

@<Input from token list, |goto restart| if end of list or
  if a parameter needs to be expanded@>=
if loc<>null then {list not exhausted}
@^inner loop@>
  begin t:=info(loc); loc:=link(loc); {move to next}
  if t>=cs_token_flag then {a control sequence token}
    begin cur_cs:=t-cs_token_flag;
    cur_cmd:=eq_type(cur_cs); cur_chr:=equiv(cur_cs);
    if cur_cmd>=outer_call then
      if cur_cmd=dont_expand then
        @<Get the next token, suppressing expansion@>
      else check_outer_validity;
    end
  else  begin cur_cmd:=t div @'400; cur_chr:=t mod @'400;
    case cur_cmd of
    left_brace: incr(align_state);
    right_brace: decr(align_state);
    out_param: @<Insert macro parameter and |goto restart|@>;
    othercases do_nothing
    endcases;
    end;
  end
else  begin {we are done with this token list}
  end_token_list; goto restart; {resume previous level}
  end

@ The present point in the program is reached only when the |expand|
routine has inserted a special marker into the input. In this special
case, |info(loc)| is known to be a control sequence token, and |link(loc)=null|.

@d no_expand_flag=257 {this characterizes a special variant of |relax|}

@<Get the next token, suppressing expansion@>=
begin cur_cs:=info(loc)-cs_token_flag; loc:=null;@/
cur_cmd:=eq_type(cur_cs); cur_chr:=equiv(cur_cs);
if cur_cmd>max_command then
  begin cur_cmd:=relax; cur_chr:=no_expand_flag;
  end;
end

@ @<Insert macro parameter...@>=
begin begin_token_list(param_stack[param_start+cur_chr-1],parameter);
goto restart;
end

@ All of the easy branches of |get_next| have now been taken care of.
There is one more branch.

@d end_line_char_inactive == (end_line_char<0)or(end_line_char>255)

@<Move to next line of file, or |goto restart|...@>=
if name>17 then @<Read next line of file into |buffer|, or
  |goto restart| if the file has ended@>
else  begin if not terminal_input then {\.{\\read} line has ended}
    begin cur_cmd:=0; cur_chr:=0; return;
    end;
  if input_ptr>0 then {text was inserted during error recovery}
    begin end_file_reading; goto restart; {resume previous level}
    end;
  if selector<log_only then open_log_file;
  if interaction>nonstop_mode then
    begin if end_line_char_inactive then incr(limit);
    if limit=start then {previous line was empty}
      print_nl("(Please type a command or say `\end')");
@.Please type...@>
    print_ln; first:=start;
    prompt_input("*"); {input on-line into |buffer|}
@.*\relax@>
    limit:=last;
    if end_line_char_inactive then decr(limit)
    else  buffer[limit]:=end_line_char;
    first:=limit+1;
    loc:=start;
    end
  else fatal_error("*** (job aborted, no legal \end found)");
@.job aborted@>
    {nonstop mode, which is intended for overnight batch processing,
    never waits for on-line input}
  end

@ The global variable |force_eof| is normally |false|; it is set |true|
by an \.{\\endinput} command.

@<Glob...@>=
@!force_eof:boolean; {should the next \.{\\input} be aborted early?}

@ @<Read next line of file into |buffer|, or
  |goto restart| if the file has ended@>=
begin incr(line); first:=start;
if not force_eof then
  begin if input_ln(cur_file,true) then {not end of file}
    firm_up_the_line {this sets |limit|}
  else force_eof:=true;
  end;
if force_eof then
  begin print_char(")"); decr(open_parens);
  update_terminal; {show user that file has been read}
  force_eof:=false;
  end_file_reading; {resume previous level}
  check_outer_validity; goto restart;
  end;
if end_line_char_inactive then decr(limit)
else  buffer[limit]:=end_line_char;
first:=limit+1; loc:=start; {ready to read}
end

@ If the user has set the |pausing| parameter to some positive value,
and if nonstop mode has not been selected, each line of input is displayed
on the terminal and the transcript file, followed by `\.{=>}'.
\TeX\ waits for a response. If the response is simply |carriage_return|, the
line is accepted as it stands, otherwise the line typed is
used instead of the line in the file.

@p procedure firm_up_the_line;
var k:0..buf_size; {an index into |buffer|}
begin limit:=last;
if pausing>0 then if interaction>nonstop_mode then
  begin wake_up_terminal; print_ln;
  if start<limit then for k:=start to limit-1 do print(buffer[k]);
  first:=limit; prompt_input("=>"); {wait for user response}
@.=>@>
  if last>first then
    begin for k:=first to last-1 do {move line down in buffer}
      buffer[k+start-first]:=buffer[k];
    limit:=start+last-first;
    end;
  end;
end;

@ Since |get_next| is used so frequently in \TeX, it is convenient
to define three related procedures that do a little more:

\yskip\hang|get_token| not only sets |cur_cmd| and |cur_chr|, it
also sets |cur_tok|, a packed halfword version of the current token.

\yskip\hang|get_x_token|, meaning ``get an expanded token,'' is like
|get_token|, but if the current token turns out to be a user-defined
control sequence (i.e., a macro call), or a conditional,
or something like \.{\\topmark} or \.{\\expandafter} or \.{\\csname},
it is eliminated from the input by beginning the expansion of the macro
or the evaluation of the conditional.

\yskip\hang|x_token| is like |get_x_token| except that it assumes that
|get_next| has already been called.

\yskip\noindent
In fact, these three procedures account for {\sl all\/} uses of |get_next|,
except for two places in the ``inner loop'' when |cur_tok| need not be set,
and except when the arguments to \.{\\ifx} are being scanned.

@ No new control sequences will be defined except during a call of
|get_token|, or when \.{\\csname} compresses a token list, because
|no_new_control_sequence| is always |true| at other times.

@p procedure get_token; {sets |cur_cmd|, |cur_chr|, |cur_tok|}
begin no_new_control_sequence:=false; get_next; no_new_control_sequence:=true;
@^inner loop@>
if cur_cs=0 then cur_tok:=(cur_cmd*@'400)+cur_chr
else cur_tok:=cs_token_flag+cur_cs;
end;

@* \[25] Expanding the next token.
Only a dozen or so command codes |>max_command| can possibly be returned by
|get_next|; in increasing order, they are |undefined_cs|, |expand_after|,
|no_expand|, |input|, |if_test|, |fi_or_else|, |cs_name|, |convert|, |the|,
|top_bot_mark|, |call|, |long_call|, |outer_call|, |long_outer_call|, and
|end_template|.{\emergencystretch=40pt\par}

The |expand| subroutine is used when |cur_cmd>max_command|. It removes a
``call'' or a conditional or one of the other special operations just
listed.  It follows that |expand| might invoke itself recursively. In all
cases, |expand| destroys the current token, but it sets things up so that
the next |get_next| will deliver the appropriate next token. The value of
|cur_tok| need not be known when |expand| is called.

Since several of the basic scanning routines communicate via global variables,
their values are saved as local variables of |expand| so that
recursive calls don't invalidate them.
@^recursion@>

@p@t\4@>@<Declare the procedure called |macro_call|@>@;@/
@t\4@>@<Declare the procedure called |insert_relax|@>@;@/
procedure@?pass_text; forward;@t\2@>
procedure@?start_input; forward;@t\2@>
procedure@?conditional; forward;@t\2@>
procedure@?get_x_token; forward;@t\2@>
procedure@?conv_toks; forward;@t\2@>
procedure@?ins_the_toks; forward;@t\2@>
procedure expand;
var t:halfword; {token that is being ``expanded after''}
@!p,@!q,@!r:pointer; {for list manipulation}
@!j:0..buf_size; {index into |buffer|}
@!cv_backup:integer; {to save the global quantity |cur_val|}
@!cvl_backup,@!radix_backup,@!co_backup:small_number;
  {to save |cur_val_level|, etc.}
@!backup_backup:pointer; {to save |link(backup_head)|}
@!save_scanner_status:small_number; {temporary storage of |scanner_status|}
begin cv_backup:=cur_val; cvl_backup:=cur_val_level; radix_backup:=radix;
co_backup:=cur_order; backup_backup:=link(backup_head);
if cur_cmd<call then @<Expand a nonmacro@>
else if cur_cmd<end_template then macro_call
else @<Insert a token containing |frozen_endv|@>;
cur_val:=cv_backup; cur_val_level:=cvl_backup; radix:=radix_backup;
cur_order:=co_backup; link(backup_head):=backup_backup;
end;

@ @<Expand a nonmacro@>=
begin if tracing_commands>1 then show_cur_cmd_chr;
case cur_cmd of
top_bot_mark:@<Insert the \(a)appropriate mark text into the scanner@>;
expand_after:@<Expand the token after the next token@>;
no_expand:@<Suppress expansion of the next token@>;
cs_name:@<Manufacture a control sequence name@>;
convert:conv_toks; {this procedure is discussed in Part 27 below}
the:ins_the_toks; {this procedure is discussed in Part 27 below}
if_test:conditional; {this procedure is discussed in Part 28 below}
fi_or_else:@<Terminate the current conditional and skip to \.{\\fi}@>;
input:@<Initiate or terminate input from a file@>;
othercases @<Complain about an undefined macro@>
endcases;
end

@ It takes only a little shuffling to do what \TeX\ calls \.{\\expandafter}.

@<Expand the token after...@>=
begin get_token; t:=cur_tok; get_token;
if cur_cmd>max_command then expand@+else back_input;
cur_tok:=t; back_input;
end

@ The implementation of \.{\\noexpand} is a bit trickier, because it is
necessary to insert a special `|dont_expand|' marker into \TeX's reading
mechanism.  This special marker is processed by |get_next|, but it does
not slow down the inner loop.

Since \.{\\outer} macros might arise here, we must also
clear the |scanner_status| temporarily.

@<Suppress expansion...@>=
begin save_scanner_status:=scanner_status; scanner_status:=normal;
get_token; scanner_status:=save_scanner_status; t:=cur_tok;
back_input; {now |start| and |loc| point to the backed-up token |t|}
if t>=cs_token_flag then
  begin p:=get_avail; info(p):=cs_token_flag+frozen_dont_expand;
  link(p):=loc; start:=p; loc:=p;
  end;
end

@ @<Complain about an undefined macro@>=
begin print_err("Undefined control sequence");
@.Undefined control sequence@>
help5("The control sequence at the end of the top line")@/
("of your error message was never \def'ed. If you have")@/
("misspelled it (e.g., `\hobx'), type `I' and the correct")@/
("spelling (e.g., `I\hbox'). Otherwise just continue,")@/
("and I'll forget about whatever was undefined.");
error;
end

@ The |expand| procedure and some other routines that construct token
lists find it convenient to use the following macros, which are valid only if
the variables |p| and |q| are reserved for token-list building.

@d store_new_token(#)==begin q:=get_avail; link(p):=q; info(q):=#;
  p:=q; {|link(p)| is |null|}
  end
@d fast_store_new_token(#)==begin fast_get_avail(q); link(p):=q; info(q):=#;
  p:=q; {|link(p)| is |null|}
  end

@ @<Manufacture a control...@>=
begin r:=get_avail; p:=r; {head of the list of characters}
repeat get_x_token;
if cur_cs=0 then store_new_token(cur_tok);
until cur_cs<>0;
if cur_cmd<>end_cs_name then @<Complain about missing \.{\\endcsname}@>;
@<Look up the characters of list |r| in the hash table, and set |cur_cs|@>;
flush_list(r);
if eq_type(cur_cs)=undefined_cs then
  begin eq_define(cur_cs,relax,256); {N.B.: The |save_stack| might change}
  end; {the control sequence will now match `\.{\\relax}'}
cur_tok:=cur_cs+cs_token_flag; back_input;
end

@ @<Complain about missing \.{\\endcsname}@>=
begin print_err("Missing "); print_esc("endcsname"); print(" inserted");
@.Missing \\endcsname...@>
help2("The control sequence marked <to be read again> should")@/
  ("not appear between \csname and \endcsname.");
back_error;
end

@ @<Look up the characters of list |r| in the hash table...@>=
j:=first; p:=link(r);
while p<>null do
  begin if j>=max_buf_stack then
    begin max_buf_stack:=j+1;
    if max_buf_stack=buf_size then
      overflow("buffer size",buf_size);
@:TeX capacity exceeded buffer size}{\quad buffer size@>
    end;
  buffer[j]:=info(p) mod @'400; incr(j); p:=link(p);
  end;
if j>first+1 then
  begin no_new_control_sequence:=false; cur_cs:=id_lookup(first,j-first);
  no_new_control_sequence:=true;
  end
else if j=first then cur_cs:=null_cs {the list is empty}
else cur_cs:=single_base+buffer[first] {the list has length one}

@ An |end_template| command is effectively changed to an |endv| command
by the following code. (The reason for this is discussed below; the
|frozen_end_template| at the end of the template has passed the
|check_outer_validity| test, so its mission of error detection has been
accomplished.)

@<Insert a token containing |frozen_endv|@>=
begin cur_tok:=cs_token_flag+frozen_endv; back_input;
end

@ The processing of \.{\\input} involves the |start_input| subroutine,
which will be declared later; the processing of \.{\\endinput} is trivial.

@<Put each...@>=
primitive("input",input,0);@/
@!@:input_}{\.{\\input} primitive@>
primitive("endinput",input,1);@/
@!@:end_input_}{\.{\\endinput} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
input: if chr_code=0 then print_esc("input")@+else print_esc("endinput");

@ @<Initiate or terminate input...@>=
if cur_chr>0 then force_eof:=true
else if name_in_progress then insert_relax
else start_input

@ Sometimes the expansion looks too far ahead, so we want to insert
a harmless \.{\\relax} into the user's input.

@<Declare the procedure called |insert_relax|@>=
procedure insert_relax;
begin cur_tok:=cs_token_flag+cur_cs; back_input;
cur_tok:=cs_token_flag+frozen_relax; back_input; token_type:=inserted;
end;

@ Here is a recursive procedure that is \TeX's usual way to get the
next token of input. It has been slightly optimized to take account of
common cases.

@p procedure get_x_token; {sets |cur_cmd|, |cur_chr|, |cur_tok|,
  and expands macros}
label restart,done;
begin restart: get_next;
@^inner loop@>
if cur_cmd<=max_command then goto done;
if cur_cmd>=call then
  if cur_cmd<end_template then macro_call
  else  begin cur_cs:=frozen_endv; cur_cmd:=endv;
    goto done; {|cur_chr=null_list|}
    end
else expand;
goto restart;
done: if cur_cs=0 then cur_tok:=(cur_cmd*@'400)+cur_chr
else cur_tok:=cs_token_flag+cur_cs;
end;

@ The |get_x_token| procedure is equivalent to two consecutive
procedure calls: |get_next; x_token|.

@p procedure x_token; {|get_x_token| without the initial |get_next|}
begin while cur_cmd>max_command do
  begin expand;
  get_next;
  end;
if cur_cs=0 then cur_tok:=(cur_cmd*@'400)+cur_chr
else cur_tok:=cs_token_flag+cur_cs;
end;

@ A control sequence that has been \.{\\def}'ed by the user is expanded by
\TeX's |macro_call| procedure.

Before we get into the details of |macro_call|, however, let's consider the
treatment of primitives like \.{\\topmark}, since they are essentially
macros without parameters. The token lists for such marks are kept in a
global array of five pointers; we refer to the individual entries of this
array by symbolic names |top_mark|, etc. The value of |top_mark| is either
|null| or a pointer to the reference count of a token list.

@d top_mark_code=0 {the mark in effect at the previous page break}
@d first_mark_code=1 {the first mark between |top_mark| and |bot_mark|}
@d bot_mark_code=2 {the mark in effect at the current page break}
@d split_first_mark_code=3 {the first mark found by \.{\\vsplit}}
@d split_bot_mark_code=4 {the last mark found by \.{\\vsplit}}
@d top_mark==cur_mark[top_mark_code]
@d first_mark==cur_mark[first_mark_code]
@d bot_mark==cur_mark[bot_mark_code]
@d split_first_mark==cur_mark[split_first_mark_code]
@d split_bot_mark==cur_mark[split_bot_mark_code]

@<Glob...@>=
@!cur_mark:array[top_mark_code..split_bot_mark_code] of pointer;
  {token lists for marks}

@ @<Set init...@>=
top_mark:=null; first_mark:=null; bot_mark:=null;
split_first_mark:=null; split_bot_mark:=null;

@ @<Put each...@>=
primitive("topmark",top_bot_mark,top_mark_code);
@!@:top_mark_}{\.{\\topmark} primitive@>
primitive("firstmark",top_bot_mark,first_mark_code);
@!@:first_mark_}{\.{\\firstmark} primitive@>
primitive("botmark",top_bot_mark,bot_mark_code);
@!@:bot_mark_}{\.{\\botmark} primitive@>
primitive("splitfirstmark",top_bot_mark,split_first_mark_code);
@!@:split_first_mark_}{\.{\\splitfirstmark} primitive@>
primitive("splitbotmark",top_bot_mark,split_bot_mark_code);
@!@:split_bot_mark_}{\.{\\splitbotmark} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
top_bot_mark: case chr_code of
  first_mark_code: print_esc("firstmark");
  bot_mark_code: print_esc("botmark");
  split_first_mark_code: print_esc("splitfirstmark");
  split_bot_mark_code: print_esc("splitbotmark");
  othercases print_esc("topmark")
  endcases;

@ The following code is activated when |cur_cmd=top_bot_mark| and
when |cur_chr| is a code like |top_mark_code|.

@<Insert the \(a)appropriate mark text into the scanner@>=
begin if cur_mark[cur_chr]<>null then
  begin_token_list(cur_mark[cur_chr],mark_text);
end

@ Now let's consider |macro_call| itself, which is invoked when \TeX\ is
scanning a control sequence whose |cur_cmd| is either |call|, |long_call|,
|outer_call|, or |long_outer_call|.  The control sequence definition
appears in the token list whose reference count is in location |cur_chr|
of |mem|.

The global variable |long_state| will be set to |call| or to |long_call|,
depending on whether or not the control sequence disallows \.{\\par}
in its parameters. The |get_next| routine will set |long_state| to
|outer_call| and emit \.{\\par}, if a file ends or if an \.{\\outer}
control sequence occurs in the midst of an argument.

@<Glob...@>=
@!long_state:call..long_outer_call; {governs the acceptance of \.{\\par}}

@ The parameters, if any, must be scanned before the macro is expanded.
Parameters are token lists without reference counts. They are placed on
an auxiliary stack called |pstack| while they are being scanned, since
the |param_stack| may be losing entries during the matching process.
(Note that |param_stack| can't be gaining entries, since |macro_call| is
the only routine that puts anything onto |param_stack|, and it
is not recursive.)

@<Glob...@>=
@!pstack:array[0..8] of pointer; {arguments supplied to a macro}

@ After parameter scanning is complete, the parameters are moved to the
|param_stack|. Then the macro body is fed to the scanner; in other words,
|macro_call| places the defined text of the control sequence at the
top of\/ \TeX's input stack, so that |get_next| will proceed to read it
next.

The global variable |cur_cs| contains the |eqtb| address of the control sequence
being expanded, when |macro_call| begins. If this control sequence has not been
declared \.{\\long}, i.e., if its command code in the |eq_type| field is
not |long_call| or |long_outer_call|, its parameters are not allowed to contain
the control sequence \.{\\par}. If an illegal \.{\\par} appears, the macro
call is aborted, and the \.{\\par} will be rescanned.

@<Declare the procedure called |macro_call|@>=
procedure macro_call; {invokes a user-defined control sequence}
label exit, continue, done, done1, found;
var r:pointer; {current node in the macro's token list}
@!p:pointer; {current node in parameter token list being built}
@!q:pointer; {new node being put into the token list}
@!s:pointer; {backup pointer for parameter matching}
@!t:pointer; {cycle pointer for backup recovery}
@!u,@!v:pointer; {auxiliary pointers for backup recovery}
@!rbrace_ptr:pointer; {one step before the last |right_brace| token}
@!n:small_number; {the number of parameters scanned}
@!unbalance:halfword; {unmatched left braces in current parameter}
@!m:halfword; {the number of tokens or groups (usually)}
@!ref_count:pointer; {start of the token list}
@!save_scanner_status:small_number; {|scanner_status| upon entry}
@!save_warning_index:pointer; {|warning_index| upon entry}
@!match_chr:ASCII_code; {character used in parameter}
begin save_scanner_status:=scanner_status; save_warning_index:=warning_index;
warning_index:=cur_cs; ref_count:=cur_chr; r:=link(ref_count); n:=0;
if tracing_macros>0 then @<Show the text of the macro being expanded@>;
if info(r)<>end_match_token then
  @<Scan the parameters and make |link(r)| point to the macro body; but
    |return| if an illegal \.{\\par} is detected@>;
@<Feed the macro body and its parameters to the scanner@>;
exit:scanner_status:=save_scanner_status; warning_index:=save_warning_index;
end;

@ Before we put a new token list on the input stack, it is wise to clean off
all token lists that have recently been depleted. Then a user macro that ends
with a call to itself will not require unbounded stack space.

@<Feed the macro body and its parameters to the scanner@>=
while (state=token_list)and(loc=null)and(token_type<>v_template) do
  end_token_list; {conserve stack space}
begin_token_list(ref_count,macro); name:=warning_index; loc:=link(r);
if n>0 then
  begin if param_ptr+n>max_param_stack then
    begin max_param_stack:=param_ptr+n;
    if max_param_stack>param_size then
      overflow("parameter stack size",param_size);
@:TeX capacity exceeded parameter stack size}{\quad parameter stack size@>
    end;
  for m:=0 to n-1 do param_stack[param_ptr+m]:=pstack[m];
  param_ptr:=param_ptr+n;
  end

@ At this point, the reader will find it advisable to review the explanation
of token list format that was presented earlier, since many aspects of that
format are of importance chiefly in the |macro_call| routine.

The token list might begin with a string of compulsory tokens before the
first |match| or |end_match|. In that case the macro name is supposed to be
followed by those tokens; the following program will set |s=null| to
represent this restriction. Otherwise |s| will be set to the first token of
a string that will delimit the next parameter.

@<Scan the parameters and make |link(r)| point to the macro body...@>=
begin scanner_status:=matching; unbalance:=0;
long_state:=eq_type(cur_cs);
if long_state>=outer_call then long_state:=long_state-2;
repeat link(temp_head):=null;
if (info(r)>match_token+255)or(info(r)<match_token) then s:=null
else  begin match_chr:=info(r)-match_token; s:=link(r); r:=s;
  p:=temp_head; m:=0;
  end;
@<Scan a parameter until its delimiter string has been found; or, if |s=null|,
  simply scan the delimiter string@>;@/
{now |info(r)| is a token whose command code is either |match| or |end_match|}
until info(r)=end_match_token;
end

@ If |info(r)| is a |match| or |end_match| command, it cannot be equal to
any token found by |get_token|. Therefore an undelimited parameter---i.e.,
a |match| that is immediately followed by |match| or |end_match|---will
always fail the test `|cur_tok=info(r)|' in the following algorithm.

@<Scan a parameter until its delimiter string has been found; or, ...@>=
continue: get_token; {set |cur_tok| to the next token of input}
if cur_tok=info(r) then
  @<Advance \(r)|r|; |goto found| if the parameter delimiter has been
    fully matched, otherwise |goto continue|@>;
@<Contribute the recently matched tokens to the current parameter, and
  |goto continue| if a partial match is still in effect;
  but abort if |s=null|@>;
if cur_tok=par_token then if long_state<>long_call then
  @<Report a runaway argument and abort@>;
if cur_tok<right_brace_limit then
  if cur_tok<left_brace_limit then
    @<Contribute an entire group to the current parameter@>
  else @<Report an extra right brace and |goto continue|@>
else @<Store the current token, but |goto continue| if it is
   a blank space that would become an undelimited parameter@>;
incr(m);
if info(r)>end_match_token then goto continue;
if info(r)<match_token then goto continue;
found: if s<>null then @<Tidy up the parameter just scanned, and tuck it away@>

@ @<Store the current token, but |goto continue| if it is...@>=
begin if cur_tok=space_token then
  if info(r)<=end_match_token then
    if info(r)>=match_token then goto continue;
store_new_token(cur_tok);
end

@ A slightly subtle point arises here: When the parameter delimiter ends
with `\.{\#\{}', the token list will have a left brace both before and
after the |end_match|\kern-.4pt. Only one of these should affect the
|align_state|, but both will be scanned, so we must make a correction.

@<Advance \(r)|r|; |goto found| if the parameter delimiter has been fully...@>=
begin r:=link(r);
if (info(r)>=match_token)and(info(r)<=end_match_token) then
  begin if cur_tok<left_brace_limit then decr(align_state);
  goto found;
  end
else goto continue;
end

@ @<Report an extra right brace and |goto continue|@>=
begin back_input; print_err("Argument of "); sprint_cs(warning_index);
@.Argument of \\x has...@>
print(" has an extra }");
help6("I've run across a `}' that doesn't seem to match anything.")@/
  ("For example, `\def\a#1{...}' and `\a}' would produce")@/
  ("this error. If you simply proceed now, the `\par' that")@/
  ("I've just inserted will cause me to report a runaway")@/
  ("argument that might be the root of the problem. But if")@/
  ("your `}' was spurious, just type `2' and it will go away.");
incr(align_state); long_state:=call; cur_tok:=par_token; ins_error;
end {a white lie; the \.{\\par} won't always trigger a runaway}

@ If |long_state=outer_call|, a runaway argument has already been reported.

@<Report a runaway argument and abort@>=
begin if long_state=call then
  begin runaway; print_err("Paragraph ended before ");
@.Paragraph ended before...@>
  sprint_cs(warning_index); print(" was complete");
  help3("I suspect you've forgotten a `}', causing me to apply this")@/
    ("control sequence to too much text. How can we recover?")@/
    ("My plan is to forget the whole thing and hope for the best.");
  back_error;
  end;
pstack[n]:=link(temp_head); align_state:=align_state-unbalance;
for m:=0 to n do flush_list(pstack[m]);
return;
end

@ When the following code becomes active, we have matched tokens from |s| to
the predecessor of |r|, and we have found that |cur_tok<>info(r)|. An
interesting situation now presents itself: If the parameter is to be
delimited by a string such as `\.{ab}', and if we have scanned `\.{aa}',
we want to contribute one `\.a' to the current parameter and resume
looking for a `\.b'. The program must account for such partial matches and
for others that can be quite complex.  But most of the time we have |s=r|
and nothing needs to be done.

Incidentally, it is possible for \.{\\par} tokens to sneak in to certain
parameters of non-\.{\\long} macros. For example, consider a case like
`\.{\\def\\a\#1\\par!\{...\}}' where the first \.{\\par} is not followed
by an exclamation point. In such situations it does not seem appropriate
to prohibit the \.{\\par}, so \TeX\ keeps quiet about this bending of
the rules.

@<Contribute the recently matched tokens to the current parameter...@>=
if s<>r then
  if s=null then @<Report an improper use of the macro and abort@>
  else  begin t:=s;
    repeat store_new_token(info(t)); incr(m); u:=link(t); v:=s;
    loop@+  begin if u=r then
        if cur_tok<>info(v) then goto done
        else  begin r:=link(v); goto continue;
          end;
      if info(u)<>info(v) then goto done;
      u:=link(u); v:=link(v);
      end;
    done: t:=link(t);
    until t=r;
    r:=s; {at this point, no tokens are recently matched}
    end

@ @<Report an improper use...@>=
begin print_err("Use of "); sprint_cs(warning_index);
@.Use of x doesn't match...@>
print(" doesn't match its definition");
help4("If you say, e.g., `\def\a1{...}', then you must always")@/
  ("put `1' after `\a', since control sequence names are")@/
  ("made up of letters only. The macro here has not been")@/
  ("followed by the required stuff, so I'm ignoring it.");
error; return;
end

@ @<Contribute an entire group to the current parameter@>=
begin unbalance:=1;
@^inner loop@>
loop@+  begin fast_store_new_token(cur_tok); get_token;
  if cur_tok=par_token then if long_state<>long_call then
    @<Report a runaway argument and abort@>;
  if cur_tok<right_brace_limit then
    if cur_tok<left_brace_limit then incr(unbalance)
    else  begin decr(unbalance);
      if unbalance=0 then goto done1;
      end;
  end;
done1: rbrace_ptr:=p; store_new_token(cur_tok);
end

@ If the parameter consists of a single group enclosed in braces, we must
strip off the enclosing braces. That's why |rbrace_ptr| was introduced.

@<Tidy up the parameter just scanned, and tuck it away@>=
begin if (m=1)and(info(p)<right_brace_limit)and(p<>temp_head) then
  begin link(rbrace_ptr):=null; free_avail(p);
  p:=link(temp_head); pstack[n]:=link(p); free_avail(p);
  end
else pstack[n]:=link(temp_head);
incr(n);
if tracing_macros>0 then
  begin begin_diagnostic; print_nl(match_chr); print_int(n);
  print("<-"); show_token_list(pstack[n-1],null,1000);
  end_diagnostic(false);
  end;
end

@ @<Show the text of the macro being expanded@>=
begin begin_diagnostic; print_ln; print_cs(warning_index);
token_show(ref_count); end_diagnostic(false);
end

@* \[26] Basic scanning subroutines.
Let's turn now to some procedures that \TeX\ calls upon frequently to digest
certain kinds of patterns in the input. Most of these are quite simple;
some are quite elaborate. Almost all of the routines call |get_x_token|,
which can cause them to be invoked recursively.
@^stomach@>
@^recursion@>

@ The |scan_left_brace| routine is called when a left brace is supposed to be
the next non-blank token. (The term ``left brace'' means, more precisely,
a character whose catcode is |left_brace|.) \TeX\ allows \.{\\relax} to
appear before the |left_brace|.

@p procedure scan_left_brace; {reads a mandatory |left_brace|}
begin @<Get the next non-blank non-relax non-call token@>;
if cur_cmd<>left_brace then
  begin print_err("Missing { inserted");
@.Missing \{ inserted@>
  help4("A left brace was mandatory here, so I've put one in.")@/
    ("You might want to delete and/or insert some corrections")@/
    ("so that I will find a matching right brace soon.")@/
    ("(If you're confused by all this, try typing `I}' now.)");
  back_error; cur_tok:=left_brace_token+"{"; cur_cmd:=left_brace;
  cur_chr:="{"; incr(align_state);
  end;
end;

@ @<Get the next non-blank non-relax non-call token@>=
repeat get_x_token;
until (cur_cmd<>spacer)and(cur_cmd<>relax)

@ The |scan_optional_equals| routine looks for an optional `\.=' sign preceded
by optional spaces; `\.{\\relax}' is not ignored here.

@p procedure scan_optional_equals;
begin  @<Get the next non-blank non-call token@>;
if cur_tok<>other_token+"=" then back_input;
end;

@ @<Get the next non-blank non-call token@>=
repeat get_x_token;
until cur_cmd<>spacer

@ In case you are getting bored, here is a slightly less trivial routine:
Given a string of lowercase letters, like `\.{pt}' or `\.{plus}' or
`\.{width}', the |scan_keyword| routine checks to see whether the next
tokens of input match this string. The match must be exact, except that
uppercase letters will match their lowercase counterparts; uppercase
equivalents are determined by subtracting |"a"-"A"|, rather than using the
|uc_code| table, since \TeX\ uses this routine only for its own limited
set of keywords.

If a match is found, the characters are effectively removed from the input
and |true| is returned. Otherwise |false| is returned, and the input
is left essentially unchanged (except for the fact that some macros
may have been expanded, etc.).
@^inner loop@>

@p function scan_keyword(@!s:str_number):boolean; {look for a given string}
label exit;
var p:pointer; {tail of the backup list}
@!q:pointer; {new node being added to the token list via |store_new_token|}
@!k:pool_pointer; {index into |str_pool|}
begin p:=backup_head; link(p):=null; k:=str_start[s];
while k<str_start[s+1] do
  begin get_x_token; {recursion is possible here}
@^recursion@>
  if (cur_cs=0)and@|
   ((cur_chr=so(str_pool[k]))or(cur_chr=so(str_pool[k])-"a"+"A")) then
    begin store_new_token(cur_tok); incr(k);
    end
  else if (cur_cmd<>spacer)or(p<>backup_head) then
    begin back_input;
    if p<>backup_head then back_list(link(backup_head));
    scan_keyword:=false; return;
    end;
  end;
flush_list(link(backup_head)); scan_keyword:=true;
exit:end;

@ Here is a procedure that sounds an alarm when mu and non-mu units
are being switched.

@p procedure mu_error;
begin print_err("Incompatible glue units");
@.Incompatible glue units@>
help1("I'm going to assume that 1mu=1pt when they're mixed.");
error;
end;

@ The next routine `|scan_something_internal|' is used to fetch internal
numeric quantities like `\.{\\hsize}', and also to handle the `\.{\\the}'
when expanding constructions like `\.{\\the\\toks0}' and
`\.{\\the\\baselineskip}'. Soon we will be considering the |scan_int|
procedure, which calls |scan_something_internal|; on the other hand,
|scan_something_internal| also calls |scan_int|, for constructions like
`\.{\\catcode\`\\\$}' or `\.{\\fontdimen} \.3 \.{\\ff}'. So we
have to declare |scan_int| as a |forward| procedure. A few other
procedures are also declared at this point.

@p procedure@?scan_int; forward; {scans an integer value}
@t\4\4@>@<Declare procedures that scan restricted classes of integers@>@;
@t\4\4@>@<Declare procedures that scan font-related stuff@>

@ \TeX\ doesn't know exactly what to expect when |scan_something_internal|
begins.  For example, an integer or dimension or glue value could occur
immediately after `\.{\\hskip}'; and one can even say \.{\\the} with
respect to token lists in constructions like
`\.{\\xdef\\o\{\\the\\output\}}'.  On the other hand, only integers are
allowed after a construction like `\.{\\count}'. To handle the various
possibilities, |scan_something_internal| has a |level| parameter, which
tells the ``highest'' kind of quantity that |scan_something_internal| is
allowed to produce. Six levels are distinguished, namely |int_val|,
|dimen_val|, |glue_val|, |mu_val|, |ident_val|, and |tok_val|.

The output of |scan_something_internal| (and of the other routines
|scan_int|, |scan_dimen|, and |scan_glue| below) is put into the global
variable |cur_val|, and its level is put into |cur_val_level|. The highest
values of |cur_val_level| are special: |mu_val| is used only when
|cur_val| points to something in a ``muskip'' register, or to one of the
three parameters \.{\\thinmuskip}, \.{\\medmuskip}, \.{\\thickmuskip};
|ident_val| is used only when |cur_val| points to a font identifier;
|tok_val| is used only when |cur_val| points to |null| or to the reference
count of a token list. The last two cases are allowed only when
|scan_something_internal| is called with |level=tok_val|.

If the output is glue, |cur_val| will point to a glue specification, and
the reference count of that glue will have been updated to reflect this
reference; if the output is a nonempty token list, |cur_val| will point to
its reference count, but in this case the count will not have been updated.
Otherwise |cur_val| will contain the integer or scaled value in question.

@d int_val=0 {integer values}
@d dimen_val=1 {dimension values}
@d glue_val=2 {glue specifications}
@d mu_val=3 {math glue specifications}
@d ident_val=4 {font identifier}
@d tok_val=5 {token lists}

@<Glob...@>=
@!cur_val:integer; {value returned by numeric scanners}
@!cur_val_level:int_val..tok_val; {the ``level'' of this value}

@ The hash table is initialized with `\.{\\count}', `\.{\\dimen}', `\.{\\skip}',
and `\.{\\muskip}' all having |register| as their command code; they are
distinguished by the |chr_code|, which is either |int_val|, |dimen_val|,
|glue_val|, or |mu_val|.

@<Put each...@>=
primitive("count",register,int_val);
@!@:count_}{\.{\\count} primitive@>
primitive("dimen",register,dimen_val);
@!@:dimen_}{\.{\\dimen} primitive@>
primitive("skip",register,glue_val);
@!@:skip_}{\.{\\skip} primitive@>
primitive("muskip",register,mu_val);
@!@:mu_skip_}{\.{\\muskip} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
register: if chr_code=int_val then print_esc("count")
  else if chr_code=dimen_val then print_esc("dimen")
  else if chr_code=glue_val then print_esc("skip")
  else print_esc("muskip");

@ OK, we're ready for |scan_something_internal| itself. A second parameter,
|negative|, is set |true| if the value that is found should be negated.
It is assumed that |cur_cmd| and |cur_chr| represent the first token of
the internal quantity to be scanned; an error will be signalled if
|cur_cmd<min_internal| or |cur_cmd>max_internal|.

@d scanned_result_end(#)==cur_val_level:=#;@+end
@d scanned_result(#)==@+begin cur_val:=#;scanned_result_end

@p procedure scan_something_internal(@!level:small_number;@!negative:boolean);
  {fetch an internal parameter}
var m:halfword; {|chr_code| part of the operand token}
@!p:0..nest_size; {index into |nest|}
begin m:=cur_chr;
case cur_cmd of
def_code: @<Fetch a character code from some table@>;
toks_register,assign_toks,def_family,set_font,def_font: @<Fetch a token list or
  font identifier, provided that |level=tok_val|@>;
assign_int: scanned_result(eqtb[m].int)(int_val);
assign_dimen: scanned_result(eqtb[m].sc)(dimen_val);
assign_glue: scanned_result(equiv(m))(glue_val);
assign_mu_glue: scanned_result(equiv(m))(mu_val);
set_aux: @<Fetch the |space_factor| or the |prev_depth|@>;
set_prev_graf: @<Fetch the |prev_graf|@>;
set_page_int:@<Fetch the |dead_cycles| or the |insert_penalties|@>;
set_page_dimen: @<Fetch something on the |page_so_far|@>;
set_shape: @<Fetch the |par_shape| size@>;
set_box_dimen: @<Fetch a box dimension@>;
char_given,math_given: scanned_result(cur_chr)(int_val);
assign_font_dimen: @<Fetch a font dimension@>;
assign_font_int: @<Fetch a font integer@>;
register: @<Fetch a register@>;
last_item: @<Fetch an item in the current node, if appropriate@>;
othercases @<Complain that \.{\\the} can't do this; give zero result@>
endcases;@/
while cur_val_level>level do @<Convert \(c)|cur_val| to a lower level@>;
@<Fix the reference count, if any, and negate |cur_val| if |negative|@>;
end;

@ @<Fetch a character code from some table@>=
begin scan_char_num;
if m=math_code_base then scanned_result(ho(math_code(cur_val)))(int_val)
else if m<math_code_base then scanned_result(equiv(m+cur_val))(int_val)
else scanned_result(eqtb[m+cur_val].int)(int_val);
end

@ @<Fetch a token list...@>=
if level<>tok_val then
  begin print_err("Missing number, treated as zero");
@.Missing number...@>
  help3("A number should have been here; I inserted `0'.")@/
    ("(If you can't figure out why I needed to see a number,")@/
    ("look up `weird error' in the index to The TeXbook.)");
@:TeXbook}{\sl The \TeX book@>
  back_error; scanned_result(0)(dimen_val);
  end
else if cur_cmd<=assign_toks then
  begin if cur_cmd<assign_toks then {|cur_cmd=toks_register|}
    begin scan_eight_bit_int; m:=toks_base+cur_val;
    end;
  scanned_result(equiv(m))(tok_val);
  end
else  begin back_input; scan_font_ident;
  scanned_result(font_id_base+cur_val)(ident_val);
  end

@ Users refer to `\.{\\the\\spacefactor}' only in horizontal
mode, and to `\.{\\the\\prevdepth}' only in vertical mode; so we put the
associated mode in the modifier part of the |set_aux| command.
The |set_page_int| command has modifier 0 or 1, for `\.{\\deadcycles}' and
`\.{\\insertpenalties}', respectively. The |set_box_dimen| command is
modified by either |width_offset|, |height_offset|, or |depth_offset|.
And the |last_item| command is modified by either |int_val|, |dimen_val|,
|glue_val|, |input_line_no_code|, or |badness_code|.

@d input_line_no_code=glue_val+1 {code for \.{\\inputlineno}}
@d badness_code=glue_val+2 {code for \.{\\badness}}

@<Put each...@>=
primitive("spacefactor",set_aux,hmode);
@!@:space_factor_}{\.{\\spacefactor} primitive@>
primitive("prevdepth",set_aux,vmode);@/
@!@:prev_depth_}{\.{\\prevdepth} primitive@>
primitive("deadcycles",set_page_int,0);
@!@:dead_cycles_}{\.{\\deadcycles} primitive@>
primitive("insertpenalties",set_page_int,1);
@!@:insert_penalties_}{\.{\\insertpenalties} primitive@>
primitive("wd",set_box_dimen,width_offset);
@!@:wd_}{\.{\\wd} primitive@>
primitive("ht",set_box_dimen,height_offset);
@!@:ht_}{\.{\\ht} primitive@>
primitive("dp",set_box_dimen,depth_offset);
@!@:dp_}{\.{\\dp} primitive@>
primitive("lastpenalty",last_item,int_val);
@!@:last_penalty_}{\.{\\lastpenalty} primitive@>
primitive("lastkern",last_item,dimen_val);
@!@:last_kern_}{\.{\\lastkern} primitive@>
primitive("lastskip",last_item,glue_val);
@!@:last_skip_}{\.{\\lastskip} primitive@>
primitive("inputlineno",last_item,input_line_no_code);
@!@:input_line_no_}{\.{\\inputlineno} primitive@>
primitive("badness",last_item,badness_code);
@!@:badness_}{\.{\\badness} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
set_aux: if chr_code=vmode then print_esc("prevdepth")
@+else print_esc("spacefactor");
set_page_int: if chr_code=0 then print_esc("deadcycles")
@+else print_esc("insertpenalties");
set_box_dimen: if chr_code=width_offset then print_esc("wd")
else if chr_code=height_offset then print_esc("ht")
else print_esc("dp");
last_item: case chr_code of
  int_val: print_esc("lastpenalty");
  dimen_val: print_esc("lastkern");
  glue_val: print_esc("lastskip");
  input_line_no_code: print_esc("inputlineno");
  othercases print_esc("badness")
  endcases;

@ @<Fetch the |space_factor| or the |prev_depth|@>=
if abs(mode)<>m then
  begin print_err("Improper "); print_cmd_chr(set_aux,m);
@.Improper \\spacefactor@>
@.Improper \\prevdepth@>
  help4("You can refer to \spacefactor only in horizontal mode;")@/
    ("you can refer to \prevdepth only in vertical mode; and")@/
    ("neither of these is meaningful inside \write. So")@/
    ("I'm forgetting what you said and using zero instead.");
  error;
  if level<>tok_val then scanned_result(0)(dimen_val)
  else scanned_result(0)(int_val);
  end
else if m=vmode then
  begin cur_val:=prev_depth; cur_val_level:=dimen_val;
  end
else begin cur_val:=space_factor; cur_val_level:=int_val;
  end

@ @<Fetch the |dead_cycles| or the |insert_penalties|@>=
begin if m=0 then cur_val:=dead_cycles@+else cur_val:=insert_penalties;
cur_val_level:=int_val;
end

@ @<Fetch a box dimension@>=
begin scan_eight_bit_int;
if box(cur_val)=null then cur_val:=0 @+else cur_val:=mem[box(cur_val)+m].sc;
cur_val_level:=dimen_val;
end

@ Inside an \.{\\output} routine, a user may wish to look at the page totals
that were present at the moment when output was triggered.

@d max_dimen==@'7777777777 {$2^{30}-1$}

@<Fetch something on the |page_so_far|@>=
begin if (page_contents=empty) and (not output_active) then
  if m=0 then cur_val:=max_dimen@+else cur_val:=0
else cur_val:=page_so_far[m];
cur_val_level:=dimen_val;
end

@ @<Fetch the |prev_graf|@>=
if mode=0 then scanned_result(0)(int_val) {|prev_graf=0| within \.{\\write}}
else begin nest[nest_ptr]:=cur_list; p:=nest_ptr;
  while abs(nest[p].mode_field)<>vmode do decr(p);
  scanned_result(nest[p].pg_field)(int_val);
  end

@ @<Fetch the |par_shape| size@>=
begin if par_shape_ptr=null then cur_val:=0
else cur_val:=info(par_shape_ptr);
cur_val_level:=int_val;
end

@ Here is where \.{\\lastpenalty}, \.{\\lastkern}, and \.{\\lastskip} are
implemented. The reference count for \.{\\lastskip} will be updated later.

We also handle \.{\\inputlineno} and \.{\\badness} here, because they are
legal in similar contexts.

@<Fetch an item in the current node...@>=
if cur_chr>glue_val then
  begin if cur_chr=input_line_no_code then cur_val:=line
  else cur_val:=last_badness; {|cur_chr=badness_code|}
  cur_val_level:=int_val;
  end
else begin if cur_chr=glue_val then cur_val:=zero_glue@+else cur_val:=0;
  cur_val_level:=cur_chr;
  if not is_char_node(tail)and(mode<>0) then
    case cur_chr of
    int_val: if type(tail)=penalty_node then cur_val:=penalty(tail);
    dimen_val: if type(tail)=kern_node then cur_val:=width(tail);
    glue_val: if type(tail)=glue_node then
      begin cur_val:=glue_ptr(tail);
      if subtype(tail)=mu_glue then cur_val_level:=mu_val;
      end;
    end {there are no other cases}
  else if (mode=vmode)and(tail=head) then
    case cur_chr of
    int_val: cur_val:=last_penalty;
    dimen_val: cur_val:=last_kern;
    glue_val: if last_glue<>max_halfword then cur_val:=last_glue;
    end; {there are no other cases}
  end

@ @<Fetch a font dimension@>=
begin find_font_dimen(false); font_info[fmem_ptr].sc:=0;
scanned_result(font_info[cur_val].sc)(dimen_val);
end

@ @<Fetch a font integer@>=
begin scan_font_ident;
if m=0 then scanned_result(hyphen_char[cur_val])(int_val)
else scanned_result(skew_char[cur_val])(int_val);
end

@ @<Fetch a register@>=
begin scan_eight_bit_int;
case m of
int_val:cur_val:=count(cur_val);
dimen_val:cur_val:=dimen(cur_val);
glue_val: cur_val:=skip(cur_val);
mu_val: cur_val:=mu_skip(cur_val);
end; {there are no other cases}
cur_val_level:=m;
end

@ @<Complain that \.{\\the} can't do this; give zero result@>=
begin print_err("You can't use `"); print_cmd_chr(cur_cmd,cur_chr);
@.You can't use x after ...@>
print("' after "); print_esc("the");
help1("I'm forgetting what you said and using zero instead.");
error;
if level<>tok_val then scanned_result(0)(dimen_val)
else scanned_result(0)(int_val);
end

@ When a |glue_val| changes to a |dimen_val|, we use the width component
of the glue; there is no need to decrease the reference count, since it
has not yet been increased.  When a |dimen_val| changes to an |int_val|,
we use scaled points so that the value doesn't actually change. And when a
|mu_val| changes to a |glue_val|, the value doesn't change either.

@<Convert \(c)|cur_val| to a lower level@>=
begin if cur_val_level=glue_val then cur_val:=width(cur_val)
else if cur_val_level=mu_val then mu_error;
decr(cur_val_level);
end

@ If |cur_val| points to a glue specification at this point, the reference
count for the glue does not yet include the reference by |cur_val|.
If |negative| is |true|, |cur_val_level| is known to be |<=mu_val|.

@<Fix the reference count, if any, ...@>=
if negative then
  if cur_val_level>=glue_val then
    begin cur_val:=new_spec(cur_val);
    @<Negate all three glue components of |cur_val|@>;
    end
  else negate(cur_val)
else if (cur_val_level>=glue_val)and(cur_val_level<=mu_val) then
  add_glue_ref(cur_val)

@ @<Negate all three...@>=
begin negate(width(cur_val));
negate(stretch(cur_val));
negate(shrink(cur_val));
end

@ Our next goal is to write the |scan_int| procedure, which scans anything that
\TeX\ treats as an integer. But first we might as well look at some simple
applications of |scan_int| that have already been made inside of
|scan_something_internal|.

@ @<Declare procedures that scan restricted classes of integers@>=
procedure scan_eight_bit_int;
begin scan_int;
if (cur_val<0)or(cur_val>255) then
  begin print_err("Bad register code");
@.Bad register code@>
  help2("A register number must be between 0 and 255.")@/
    ("I changed this one to zero."); int_error(cur_val); cur_val:=0;
  end;
end;

@ @<Declare procedures that scan restricted classes of integers@>=
procedure scan_char_num;
begin scan_int;
if (cur_val<0)or(cur_val>255) then
  begin print_err("Bad character code");
@.Bad character code@>
  help2("A character number must be between 0 and 255.")@/
    ("I changed this one to zero."); int_error(cur_val); cur_val:=0;
  end;
end;

@ While we're at it, we might as well deal with similar routines that
will be needed later.

@<Declare procedures that scan restricted classes of integers@>=
procedure scan_four_bit_int;
begin scan_int;
if (cur_val<0)or(cur_val>15) then
  begin print_err("Bad number");
@.Bad number@>
  help2("Since I expected to read a number between 0 and 15,")@/
    ("I changed this one to zero."); int_error(cur_val); cur_val:=0;
  end;
end;

@ @<Declare procedures that scan restricted classes of integers@>=
procedure scan_fifteen_bit_int;
begin scan_int;
if (cur_val<0)or(cur_val>@'77777) then
  begin print_err("Bad mathchar");
@.Bad mathchar@>
  help2("A mathchar number must be between 0 and 32767.")@/
    ("I changed this one to zero."); int_error(cur_val); cur_val:=0;
  end;
end;

@ @<Declare procedures that scan restricted classes of integers@>=
procedure scan_twenty_seven_bit_int;
begin scan_int;
if (cur_val<0)or(cur_val>@'777777777) then
  begin print_err("Bad delimiter code");
@.Bad delimiter code@>
  help2("A numeric delimiter code must be between 0 and 2^{27}-1.")@/
    ("I changed this one to zero."); int_error(cur_val); cur_val:=0;
  end;
end;

@ An integer number can be preceded by any number of spaces and `\.+' or
`\.-' signs. Then comes either a decimal constant (i.e., radix 10), an
octal constant (i.e., radix 8, preceded by~\.\'), a hexadecimal constant
(radix 16, preceded by~\."), an alphabetic constant (preceded by~\.\`), or
an internal variable. After scanning is complete,
|cur_val| will contain the answer, which must be at most
$2^{31}-1=2147483647$ in absolute value. The value of |radix| is set to
10, 8, or 16 in the cases of decimal, octal, or hexadecimal constants,
otherwise |radix| is set to zero. An optional space follows a constant.

@d octal_token=other_token+"'" {apostrophe, indicates an octal constant}
@d hex_token=other_token+"""" {double quote, indicates a hex constant}
@d alpha_token=other_token+"`" {reverse apostrophe, precedes alpha constants}
@d point_token=other_token+"." {decimal point}
@d continental_point_token=other_token+"," {decimal point, Eurostyle}

@<Glob...@>=
@!radix:small_number; {|scan_int| sets this to 8, 10, 16, or zero}

@ We initialize the following global variables just in case |expand|
comes into action before any of the basic scanning routines has assigned
them a value.

@<Set init...@>=
cur_val:=0; cur_val_level:=int_val; radix:=0; cur_order:=0;

@ The |scan_int| routine is used also to scan the integer part of a
fraction; for example, the `\.3' in `\.{3.14159}' will be found by
|scan_int|. The |scan_dimen| routine assumes that |cur_tok=point_token|
after the integer part of such a fraction has been scanned by |scan_int|,
and that the decimal point has been backed up to be scanned again.

@p procedure scan_int; {sets |cur_val| to an integer}
label done;
var negative:boolean; {should the answer be negated?}
@!m:integer; {|@t$2^{31}$@> div radix|, the threshold of danger}
@!d:small_number; {the digit just scanned}
@!vacuous:boolean; {have no digits appeared?}
@!OK_so_far:boolean; {has an error message been issued?}
begin radix:=0; OK_so_far:=true;@/
@<Get the next non-blank non-sign token; set |negative| appropriately@>;
if cur_tok=alpha_token then @<Scan an alphabetic character code into |cur_val|@>
else if (cur_cmd>=min_internal)and(cur_cmd<=max_internal) then
  scan_something_internal(int_val,false)
else @<Scan a numeric constant@>;
if negative then negate(cur_val);
end;

@ @<Get the next non-blank non-sign token...@>=
negative:=false;
repeat @<Get the next non-blank non-call token@>;
if cur_tok=other_token+"-" then
  begin negative := not negative; cur_tok:=other_token+"+";
  end;
until cur_tok<>other_token+"+"

@ A space is ignored after an alphabetic character constant, so that
such constants behave like numeric ones.

@<Scan an alphabetic character code into |cur_val|@>=
begin get_token; {suppress macro expansion}
if cur_tok<cs_token_flag then
  begin cur_val:=cur_chr;
  if cur_cmd<=right_brace then
    if cur_cmd=right_brace then incr(align_state)
    else decr(align_state);
  end
else if cur_tok<cs_token_flag+single_base then
  cur_val:=cur_tok-cs_token_flag-active_base
else cur_val:=cur_tok-cs_token_flag-single_base;
if cur_val>255 then
  begin print_err("Improper alphabetic constant");
@.Improper alphabetic constant@>
  help2("A one-character control sequence belongs after a ` mark.")@/
    ("So I'm essentially inserting \0 here.");
  cur_val:="0"; back_error;
  end
else @<Scan an optional space@>;
end

@ @<Scan an optional space@>=
begin get_x_token; if cur_cmd<>spacer then back_input;
end

@ @<Scan a numeric constant@>=
begin radix:=10; m:=214748364;
if cur_tok=octal_token then
  begin radix:=8; m:=@'2000000000; get_x_token;
  end
else if cur_tok=hex_token then
  begin radix:=16; m:=@'1000000000; get_x_token;
  end;
vacuous:=true; cur_val:=0;@/
@<Accumulate the constant until |cur_tok| is not a suitable digit@>;
if vacuous then @<Express astonishment that no number was here@>
else if cur_cmd<>spacer then back_input;
end

@ @d infinity==@'17777777777 {the largest positive value that \TeX\ knows}
@d zero_token=other_token+"0" {zero, the smallest digit}
@d A_token=letter_token+"A" {the smallest special hex digit}
@d other_A_token=other_token+"A" {special hex digit of type |other_char|}

@<Accumulate the constant...@>=
loop@+  begin if (cur_tok<zero_token+radix)and(cur_tok>=zero_token)and
    (cur_tok<=zero_token+9) then d:=cur_tok-zero_token
  else if radix=16 then
    if (cur_tok<=A_token+5)and(cur_tok>=A_token) then d:=cur_tok-A_token+10
    else if (cur_tok<=other_A_token+5)and(cur_tok>=other_A_token) then
      d:=cur_tok-other_A_token+10
    else goto done
  else goto done;
  vacuous:=false;
  if (cur_val>=m)and((cur_val>m)or(d>7)or(radix<>10)) then
    begin if OK_so_far then
      begin print_err("Number too big");
@.Number too big@>
      help2("I can only go up to 2147483647='17777777777=""7FFFFFFF,")@/
        ("so I'm using that number instead of yours.");
      error; cur_val:=infinity; OK_so_far:=false;
      end;
    end
  else cur_val:=cur_val*radix+d;
  get_x_token;
  end;
done:

@ @<Express astonishment...@>=
begin print_err("Missing number, treated as zero");
@.Missing number...@>
help3("A number should have been here; I inserted `0'.")@/
  ("(If you can't figure out why I needed to see a number,")@/
  ("look up `weird error' in the index to The TeXbook.)");
@:TeXbook}{\sl The \TeX book@>
back_error;
end

@ The |scan_dimen| routine is similar to |scan_int|, but it sets |cur_val| to
a |scaled| value, i.e., an integral number of sp. One of its main tasks
is therefore to interpret the abbreviations for various kinds of units and
to convert measurements to scaled points.

There are three parameters: |mu| is |true| if the finite units must be
`\.{mu}', while |mu| is |false| if `\.{mu}' units are disallowed;
|inf| is |true| if the infinite units `\.{fil}', `\.{fill}', `\.{filll}'
are permitted; and |shortcut| is |true| if |cur_val| already contains
an integer and only the units need to be considered.

The order of infinity that was found in the case of infinite glue is returned
in the global variable |cur_order|.

@<Glob...@>=
@!cur_order:glue_ord; {order of infinity found by |scan_dimen|}

@ Constructions like `\.{-\'77 pt}' are legal dimensions, so |scan_dimen|
may begin with |scan_int|. This explains why it is convenient to use
|scan_int| also for the integer part of a decimal fraction.

Several branches of |scan_dimen| work with |cur_val| as an integer and
with an auxiliary fraction |f|, so that the actual quantity of interest is
$|cur_val|+|f|/2^{16}$. At the end of the routine, this ``unpacked''
representation is put into the single word |cur_val|, which suddenly
switches significance from |integer| to |scaled|.

@d attach_fraction=88 {go here to pack |cur_val| and |f| into |cur_val|}
@d attach_sign=89 {go here when |cur_val| is correct except perhaps for sign}
@d scan_normal_dimen==scan_dimen(false,false,false)

@p procedure scan_dimen(@!mu,@!inf,@!shortcut:boolean);
  {sets |cur_val| to a dimension}
label done, done1, done2, found, not_found, attach_fraction, attach_sign;
var negative:boolean; {should the answer be negated?}
@!f:integer; {numerator of a fraction whose denominator is $2^{16}$}
@<Local variables for dimension calculations@>@;
begin f:=0; arith_error:=false; cur_order:=normal; negative:=false;
if not shortcut then
  begin @<Get the next non-blank non-sign...@>;
  if (cur_cmd>=min_internal)and(cur_cmd<=max_internal) then
    @<Fetch an internal dimension and |goto attach_sign|,
      or fetch an internal integer@>
  else  begin back_input;
    if cur_tok=continental_point_token then cur_tok:=point_token;
    if cur_tok<>point_token then scan_int
    else  begin radix:=10; cur_val:=0;
      end;
    if cur_tok=continental_point_token then cur_tok:=point_token;
    if (radix=10)and(cur_tok=point_token) then @<Scan decimal fraction@>;
    end;
  end;
if cur_val<0 then {in this case |f=0|}
  begin negative := not negative; negate(cur_val);
  end;
@<Scan units and set |cur_val| to $x\cdot(|cur_val|+f/2^{16})$, where there
  are |x| sp per unit; |goto attach_sign| if the units are internal@>;
@<Scan an optional space@>;
attach_sign: if arith_error or(abs(cur_val)>=@'10000000000) then
  @<Report that this dimension is out of range@>;
if negative then negate(cur_val);
end;

@ @<Fetch an internal dimension and |goto attach_sign|...@>=
if mu then
  begin scan_something_internal(mu_val,false);
  @<Coerce glue to a dimension@>;
  if cur_val_level=mu_val then goto attach_sign;
  if cur_val_level<>int_val then mu_error;
  end
else  begin scan_something_internal(dimen_val,false);
  if cur_val_level=dimen_val then goto attach_sign;
  end

@ @<Local variables for dimension calculations@>=
@!num,@!denom:1..65536; {conversion ratio for the scanned units}
@!k,@!kk:small_number; {number of digits in a decimal fraction}
@!p,@!q:pointer; {top of decimal digit stack}
@!v:scaled; {an internal dimension}
@!save_cur_val:integer; {temporary storage of |cur_val|}

@ The following code is executed when |scan_something_internal| was
called asking for |mu_val|, when we really wanted a ``mudimen'' instead
of ``muglue.''

@<Coerce glue to a dimension@>=
if cur_val_level>=glue_val then
  begin v:=width(cur_val); delete_glue_ref(cur_val); cur_val:=v;
  end

@ When the following code is executed, we have |cur_tok=point_token|, but this
token has been backed up using |back_input|; we must first discard it.

It turns out that a decimal point all by itself is equivalent to `\.{0.0}'.
Let's hope people don't use that fact.

@<Scan decimal fraction@>=
begin k:=0; p:=null; get_token; {|point_token| is being re-scanned}
loop@+  begin get_x_token;
  if (cur_tok>zero_token+9)or(cur_tok<zero_token) then goto done1;
  if k<17 then {digits for |k>=17| cannot affect the result}
    begin q:=get_avail; link(q):=p; info(q):=cur_tok-zero_token;
    p:=q; incr(k);
    end;
  end;
done1: for kk:=k downto 1 do
  begin dig[kk-1]:=info(p); q:=p; p:=link(p); free_avail(q);
  end;
f:=round_decimals(k);
if cur_cmd<>spacer then back_input;
end

@ Now comes the harder part: At this point in the program, |cur_val| is a
nonnegative integer and $f/2^{16}$ is a nonnegative fraction less than 1;
we want to multiply the sum of these two quantities by the appropriate
factor, based on the specified units, in order to produce a |scaled|
result, and we want to do the calculation with fixed point arithmetic that
does not overflow.

@<Scan units and set |cur_val| to $x\cdot(|cur_val|+f/2^{16})$...@>=
if inf then @<Scan for \(f)\.{fil} units; |goto attach_fraction| if found@>;
@<Scan for \(u)units that are internal dimensions;
  |goto attach_sign| with |cur_val| set if found@>;
if mu then @<Scan for \(m)\.{mu} units and |goto attach_fraction|@>;
if scan_keyword("true") then @<Adjust \(f)for the magnification ratio@>;
@.true@>
if scan_keyword("pt") then goto attach_fraction; {the easy case}
@.pt@>
@<Scan for \(a)all other units and adjust |cur_val| and |f| accordingly;
  |goto done| in the case of scaled points@>;
attach_fraction: if cur_val>=@'40000 then arith_error:=true
else cur_val:=cur_val*unity+f;
done:

@ A specification like `\.{filllll}' or `\.{fill L L L}' will lead to two
error messages (one for each additional keyword \.{"l"}).

@<Scan for \(f)\.{fil} units...@>=
if scan_keyword("fil") then
@.fil@>
  begin cur_order:=fil;
  while scan_keyword("l") do
    begin if cur_order=filll then
      begin print_err("Illegal unit of measure (");
@.Illegal unit of measure@>
      print("replaced by filll)");
      help1("I dddon't go any higher than filll."); error;
      end
    else incr(cur_order);
    end;
  goto attach_fraction;
  end

@ @<Scan for \(u)units that are internal dimensions...@>=
save_cur_val:=cur_val;
@<Get the next non-blank non-call...@>;
if (cur_cmd<min_internal)or(cur_cmd>max_internal) then back_input
else  begin if mu then
    begin scan_something_internal(mu_val,false); @<Coerce glue...@>;
    if cur_val_level<>mu_val then mu_error;
    end
  else scan_something_internal(dimen_val,false);
  v:=cur_val; goto found;
  end;
if mu then goto not_found;
if scan_keyword("em") then v:=(@<The em width for |cur_font|@>)
@.em@>
else if scan_keyword("ex") then v:=(@<The x-height for |cur_font|@>)
@.ex@>
else goto not_found;
@<Scan an optional space@>;
found:cur_val:=nx_plus_y(save_cur_val,v,xn_over_d(v,f,@'200000));
goto attach_sign;
not_found:

@ @<Scan for \(m)\.{mu} units and |goto attach_fraction|@>=
if scan_keyword("mu") then goto attach_fraction
@.mu@>
else  begin print_err("Illegal unit of measure ("); print("mu inserted)");
@.Illegal unit of measure@>
  help4("The unit of measurement in math glue must be mu.")@/
    ("To recover gracefully from this error, it's best to")@/
    ("delete the erroneous units; e.g., type `2' to delete")@/
    ("two letters. (See Chapter 27 of The TeXbook.)");
@:TeXbook}{\sl The \TeX book@>
  error; goto attach_fraction;
  end

@ @<Adjust \(f)for the magnification ratio@>=
begin prepare_mag;
if mag<>1000 then
  begin cur_val:=xn_over_d(cur_val,1000,mag);
  f:=(1000*f+@'200000*remainder) div mag;
  cur_val:=cur_val+(f div @'200000); f:=f mod @'200000;
  end;
end

@ The necessary conversion factors can all be specified exactly as
fractions whose numerator and denominator are 32768 or less.
According to the definitions here, $\rm2660\,dd\approx1000.33297\,mm$;
this agrees well with the value $\rm1000.333\,mm$ cited by Bosshard
@^Bosshard, Hans Rudolf@>
in {\sl Technische Grundlagen zur Satzherstellung\/} (Bern, 1980).

@d set_conversion_end(#)== denom:=#; end
@d set_conversion(#)==@+begin num:=#; set_conversion_end

@<Scan for \(a)all other units and adjust |cur_val| and |f|...@>=
if scan_keyword("in") then set_conversion(7227)(100)
@.in@>
else if scan_keyword("pc") then set_conversion(12)(1)
@.pc@>
else if scan_keyword("cm") then set_conversion(7227)(254)
@.cm@>
else if scan_keyword("mm") then set_conversion(7227)(2540)
@.mm@>
else if scan_keyword("bp") then set_conversion(7227)(7200)
@.bp@>
else if scan_keyword("dd") then set_conversion(1238)(1157)
@.dd@>
else if scan_keyword("cc") then set_conversion(14856)(1157)
@.cc@>
else if scan_keyword("sp") then goto done
@.sp@>
else @<Complain about unknown unit and |goto done2|@>;
cur_val:=xn_over_d(cur_val,num,denom);
f:=(num*f+@'200000*remainder) div denom;@/
cur_val:=cur_val+(f div @'200000); f:=f mod @'200000;
done2:

@ @<Complain about unknown unit...@>=
begin print_err("Illegal unit of measure ("); print("pt inserted)");
@.Illegal unit of measure@>
help6("Dimensions can be in units of em, ex, in, pt, pc,")@/
  ("cm, mm, dd, cc, bp, or sp; but yours is a new one!")@/
  ("I'll assume that you meant to say pt, for printer's points.")@/
  ("To recover gracefully from this error, it's best to")@/
  ("delete the erroneous units; e.g., type `2' to delete")@/
  ("two letters. (See Chapter 27 of The TeXbook.)");
@:TeXbook}{\sl The \TeX book@>
error; goto done2;
end


@ @<Report that this dimension is out of range@>=
begin print_err("Dimension too large");
@.Dimension too large@>
help2("I can't work with sizes bigger than about 19 feet.")@/
  ("Continue and I'll use the largest value I can.");@/
error; cur_val:=max_dimen; arith_error:=false;
end

@ The final member of \TeX's value-scanning trio is |scan_glue|, which
makes |cur_val| point to a glue specification. The reference count of that
glue spec will take account of the fact that |cur_val| is pointing to~it.

The |level| parameter should be either |glue_val| or |mu_val|.

Since |scan_dimen| was so much more complex than |scan_int|, we might expect
|scan_glue| to be even worse. But fortunately, it is very simple, since
most of the work has already been done.

@p procedure scan_glue(@!level:small_number);
  {sets |cur_val| to a glue spec pointer}
label exit;
var negative:boolean; {should the answer be negated?}
@!q:pointer; {new glue specification}
@!mu:boolean; {does |level=mu_val|?}
begin mu:=(level=mu_val); @<Get the next non-blank non-sign...@>;
if (cur_cmd>=min_internal)and(cur_cmd<=max_internal) then
  begin scan_something_internal(level,negative);
  if cur_val_level>=glue_val then
    begin if cur_val_level<>level then mu_error;
    return;
    end;
  if cur_val_level=int_val then scan_dimen(mu,false,true)
  else if level=mu_val then mu_error;
  end
else  begin back_input; scan_dimen(mu,false,false);
  if negative then negate(cur_val);
  end;
@<Create a new glue specification whose width is |cur_val|; scan for its
  stretch and shrink components@>;
exit:end;

@ @<Create a new glue specification whose width is |cur_val|...@>=
q:=new_spec(zero_glue); width(q):=cur_val;
if scan_keyword("plus") then
@.plus@>
  begin scan_dimen(mu,true,false);
  stretch(q):=cur_val; stretch_order(q):=cur_order;
  end;
if scan_keyword("minus") then
@.minus@>
  begin scan_dimen(mu,true,false);
  shrink(q):=cur_val; shrink_order(q):=cur_order;
  end;
cur_val:=q

@ Here's a similar procedure that returns a pointer to a rule node. This
routine is called just after \TeX\ has seen \.{\\hrule} or \.{\\vrule};
therefore |cur_cmd| will be either |hrule| or |vrule|. The idea is to store
the default rule dimensions in the node, then to override them if
`\.{height}' or `\.{width}' or `\.{depth}' specifications are
found (in any order).

@d default_rule=26214 {0.4\thinspace pt}

@p function scan_rule_spec:pointer;
label reswitch;
var q:pointer; {the rule node being created}
begin q:=new_rule; {|width|, |depth|, and |height| all equal |null_flag| now}
if cur_cmd=vrule then width(q):=default_rule
else  begin height(q):=default_rule; depth(q):=0;
  end;
reswitch: if scan_keyword("width") then
@.width@>
  begin scan_normal_dimen; width(q):=cur_val; goto reswitch;
  end;
if scan_keyword("height") then
@.height@>
  begin scan_normal_dimen; height(q):=cur_val; goto reswitch;
  end;
if scan_keyword("depth") then
@.depth@>
  begin scan_normal_dimen; depth(q):=cur_val; goto reswitch;
  end;
scan_rule_spec:=q;
end;

@* \[27] Building token lists.
The token lists for macros and for other things like \.{\\mark} and \.{\\output}
and \.{\\write} are produced by a procedure called |scan_toks|.

Before we get into the details of |scan_toks|, let's consider a much
simpler task, that of converting the current string into a token list.
The |str_toks| function does this; it classifies spaces as type |spacer|
and everything else as type |other_char|.

The token list created by |str_toks| begins at |link(temp_head)| and ends
at the value |p| that is returned. (If |p=temp_head|, the list is empty.)

@p function str_toks(@!b:pool_pointer):pointer;
  {changes the string |str_pool[b..pool_ptr]| to a token list}
var p:pointer; {tail of the token list}
@!q:pointer; {new node being added to the token list via |store_new_token|}
@!t:halfword; {token being appended}
@!k:pool_pointer; {index into |str_pool|}
begin str_room(1);
p:=temp_head; link(p):=null; k:=b;
while k<pool_ptr do
  begin t:=so(str_pool[k]);
  if t=" " then t:=space_token
  else t:=other_token+t;
  fast_store_new_token(t);
  incr(k);
  end;
pool_ptr:=b; str_toks:=p;
end;

@ The main reason for wanting |str_toks| is the next function,
|the_toks|, which has similar input/output characteristics.

This procedure is supposed to scan something like `\.{\\skip\\count12}',
i.e., whatever can follow `\.{\\the}', and it constructs a token list
containing something like `\.{-3.0pt minus 0.5fill}'.

@p function the_toks:pointer;
var old_setting:0..max_selector; {holds |selector| setting}
@!p,@!q,@!r:pointer; {used for copying a token list}
@!b:pool_pointer; {base of temporary string}
begin get_x_token; scan_something_internal(tok_val,false);
if cur_val_level>=ident_val then @<Copy the token list@>
else begin old_setting:=selector; selector:=new_string; b:=pool_ptr;
  case cur_val_level of
  int_val:print_int(cur_val);
  dimen_val:begin print_scaled(cur_val); print("pt");
    end;
  glue_val: begin print_spec(cur_val,"pt"); delete_glue_ref(cur_val);
    end;
  mu_val: begin print_spec(cur_val,"mu"); delete_glue_ref(cur_val);
    end;
  end; {there are no other cases}
  selector:=old_setting; the_toks:=str_toks(b);
  end;
end;

@ @<Copy the token list@>=
begin p:=temp_head; link(p):=null;
if cur_val_level=ident_val then store_new_token(cs_token_flag+cur_val)
else if cur_val<>null then
  begin r:=link(cur_val); {do not copy the reference count}
  while r<>null do
    begin fast_store_new_token(info(r)); r:=link(r);
    end;
  end;
the_toks:=p;
end

@ Here's part of the |expand| subroutine that we are now ready to complete:

@p procedure ins_the_toks;
begin link(garbage):=the_toks; ins_list(link(temp_head));
end;

@ The primitives \.{\\number}, \.{\\romannumeral}, \.{\\string}, \.{\\meaning},
\.{\\fontname}, and \.{\\jobname} are defined as follows.

@d number_code=0 {command code for \.{\\number}}
@d roman_numeral_code=1 {command code for \.{\\romannumeral}}
@d string_code=2 {command code for \.{\\string}}
@d meaning_code=3 {command code for \.{\\meaning}}
@d font_name_code=4 {command code for \.{\\fontname}}
@d job_name_code=5 {command code for \.{\\jobname}}

@<Put each...@>=
primitive("number",convert,number_code);@/
@!@:number_}{\.{\\number} primitive@>
primitive("romannumeral",convert,roman_numeral_code);@/
@!@:roman_numeral_}{\.{\\romannumeral} primitive@>
primitive("string",convert,string_code);@/
@!@:string_}{\.{\\string} primitive@>
primitive("meaning",convert,meaning_code);@/
@!@:meaning_}{\.{\\meaning} primitive@>
primitive("fontname",convert,font_name_code);@/
@!@:font_name_}{\.{\\fontname} primitive@>
primitive("jobname",convert,job_name_code);@/
@!@:job_name_}{\.{\\jobname} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
convert: case chr_code of
  number_code: print_esc("number");
  roman_numeral_code: print_esc("romannumeral");
  string_code: print_esc("string");
  meaning_code: print_esc("meaning");
  font_name_code: print_esc("fontname");
  othercases print_esc("jobname")
  endcases;

@ The procedure |conv_toks| uses |str_toks| to insert the token list
for |convert| functions into the scanner; `\.{\\outer}' control sequences
are allowed to follow `\.{\\string}' and `\.{\\meaning}'.

@p procedure conv_toks;
var old_setting:0..max_selector; {holds |selector| setting}
@!c:number_code..job_name_code; {desired type of conversion}
@!save_scanner_status:small_number; {|scanner_status| upon entry}
@!b:pool_pointer; {base of temporary string}
begin c:=cur_chr; @<Scan the argument for command |c|@>;
old_setting:=selector; selector:=new_string; b:=pool_ptr;
@<Print the result of command |c|@>;
selector:=old_setting; link(garbage):=str_toks(b); ins_list(link(temp_head));
end;

@ @<Scan the argument for command |c|@>=
case c of
number_code,roman_numeral_code: scan_int;
string_code, meaning_code: begin save_scanner_status:=scanner_status;
  scanner_status:=normal; get_token; scanner_status:=save_scanner_status;
  end;
font_name_code: scan_font_ident;
job_name_code: if job_name=0 then open_log_file;
end {there are no other cases}

@ @<Print the result of command |c|@>=
case c of
number_code: print_int(cur_val);
roman_numeral_code: print_roman_int(cur_val);
string_code:if cur_cs<>0 then sprint_cs(cur_cs)
  else print_char(cur_chr);
meaning_code: print_meaning;
font_name_code: begin print(font_name[cur_val]);
  if font_size[cur_val]<>font_dsize[cur_val] then
    begin print(" at "); print_scaled(font_size[cur_val]);
    print("pt");
    end;
  end;
job_name_code: print(job_name);
end {there are no other cases}

@ Now we can't postpone the difficulties any longer; we must bravely tackle
|scan_toks|. This function returns a pointer to the tail of a new token
list, and it also makes |def_ref| point to the reference count at the
head of that list.

There are two boolean parameters, |macro_def| and |xpand|. If |macro_def|
is true, the goal is to create the token list for a macro definition;
otherwise the goal is to create the token list for some other \TeX\
primitive: \.{\\mark}, \.{\\output}, \.{\\everypar}, \.{\\lowercase},
\.{\\uppercase}, \.{\\message}, \.{\\errmessage}, \.{\\write}, or
\.{\\special}. In the latter cases a left brace must be scanned next; this
left brace will not be part of the token list, nor will the matching right
brace that comes at the end. If |xpand| is false, the token list will
simply be copied from the input using |get_token|. Otherwise all expandable
tokens will be expanded until unexpandable tokens are left, except that
the results of expanding `\.{\\the}' are not expanded further.
If both |macro_def| and |xpand| are true, the expansion applies
only to the macro body (i.e., to the material following the first
|left_brace| character).

The value of |cur_cs| when |scan_toks| begins should be the |eqtb|
address of the control sequence to display in ``runaway'' error
messages.

@p function scan_toks(@!macro_def,@!xpand:boolean):pointer;
label found,done,done1,done2;
var t:halfword; {token representing the highest parameter number}
@!s:halfword; {saved token}
@!p:pointer; {tail of the token list being built}
@!q:pointer; {new node being added to the token list via |store_new_token|}
@!unbalance:halfword; {number of unmatched left braces}
@!hash_brace:halfword; {possible `\.{\#\{}' token}
begin if macro_def then scanner_status:=defining
@+else scanner_status:=absorbing;
warning_index:=cur_cs; def_ref:=get_avail; token_ref_count(def_ref):=null;
p:=def_ref; hash_brace:=0; t:=zero_token;
if macro_def then @<Scan and build the parameter part of the macro definition@>
else scan_left_brace; {remove the compulsory left brace}
@<Scan and build the body of the token list; |goto found| when finished@>;
found: scanner_status:=normal;
if hash_brace<>0 then store_new_token(hash_brace);
scan_toks:=p;
end;

@ @<Scan and build the parameter part...@>=
begin loop begin get_token; {set |cur_cmd|, |cur_chr|, |cur_tok|}
  if cur_tok<right_brace_limit then goto done1;
  if cur_cmd=mac_param then
    @<If the next character is a parameter number, make |cur_tok|
      a |match| token; but if it is a left brace, store
      `|left_brace|, |end_match|', set |hash_brace|, and |goto done|@>;
  store_new_token(cur_tok);
  end;
done1: store_new_token(end_match_token);
if cur_cmd=right_brace then
  @<Express shock at the missing left brace; |goto found|@>;
done: end

@ @<Express shock...@>=
begin print_err("Missing { inserted"); incr(align_state);
@.Missing \{ inserted@>
help2("Where was the left brace? You said something like `\def\a}',")@/
  ("which I'm going to interpret as `\def\a{}'."); error; goto found;
end

@ @<If the next character is a parameter number...@>=
begin s:=match_token+cur_chr; get_token;
if cur_cmd=left_brace then
  begin hash_brace:=cur_tok;
  store_new_token(cur_tok); store_new_token(end_match_token);
  goto done;
  end;
if t=zero_token+9 then
  begin print_err("You already have nine parameters");
@.You already have nine...@>
  help1("I'm going to ignore the # sign you just used."); error;
  end
else  begin incr(t);
  if cur_tok<>t then
    begin print_err("Parameters must be numbered consecutively");
@.Parameters...consecutively@>
    help2("I've inserted the digit you should have used after the #.")@/
      ("Type `1' to delete what you did use."); back_error;
    end;
  cur_tok:=s;
  end;
end

@ @<Scan and build the body of the token list; |goto found| when finished@>=
unbalance:=1;
loop@+  begin if xpand then @<Expand the next part of the input@>
  else get_token;
  if cur_tok<right_brace_limit then
    if cur_cmd<right_brace then incr(unbalance)
    else  begin decr(unbalance);
      if unbalance=0 then goto found;
      end
  else if cur_cmd=mac_param then
    if macro_def then @<Look for parameter number or \.{\#\#}@>;
  store_new_token(cur_tok);
  end

@ Here we insert an entire token list created by |the_toks| without
expanding it further.

@<Expand the next part of the input@>=
begin loop begin get_next;
  if cur_cmd<=max_command then goto done2;
  if cur_cmd<>the then expand
  else  begin q:=the_toks;
    if link(temp_head)<>null then
      begin link(p):=link(temp_head); p:=q;
      end;
    end;
  end;
done2: x_token
end

@ @<Look for parameter number...@>=
begin s:=cur_tok;
if xpand then get_x_token else get_token;
if cur_cmd<>mac_param then
  if (cur_tok<=zero_token)or(cur_tok>t) then
    begin print_err("Illegal parameter number in definition of ");
@.Illegal parameter number...@>
    sprint_cs(warning_index);
    help3("You meant to type ## instead of #, right?")@/
    ("Or maybe a } was forgotten somewhere earlier, and things")@/
    ("are all screwed up? I'm going to assume that you meant ##.");
    back_error; cur_tok:=s;
    end
  else cur_tok:=out_param_token-"0"+cur_chr;
end

@ Another way to create a token list is via the \.{\\read} command. The
sixteen files potentially usable for reading appear in the following
global variables. The value of |read_open[n]| will be |closed| if
stream number |n| has not been opened or if it has been fully read;
|just_open| if an \.{\\openin} but not a \.{\\read} has been done;
and |normal| if it is open and ready to read the next line.

@d closed=2 {not open, or at end of file}
@d just_open=1 {newly opened, first line not yet read}

@<Glob...@>=
@!read_file:array[0..15] of alpha_file; {used for \.{\\read}}
@!read_open:array[0..16] of normal..closed; {state of |read_file[n]|}

@ @<Set init...@>=
for k:=0 to 16 do read_open[k]:=closed;

@ The |read_toks| procedure constructs a token list like that for any
macro definition, and makes |cur_val| point to it. Parameter |r| points
to the control sequence that will receive this token list.

@p procedure read_toks(@!n:integer;@!r:pointer);
label done;
var p:pointer; {tail of the token list}
@!q:pointer; {new node being added to the token list via |store_new_token|}
@!s:integer; {saved value of |align_state|}
@!m:small_number; {stream number}
begin scanner_status:=defining; warning_index:=r;
def_ref:=get_avail; token_ref_count(def_ref):=null;
p:=def_ref; {the reference count}
store_new_token(end_match_token);
if (n<0)or(n>15) then m:=16@+else m:=n;
s:=align_state; align_state:=1000000; {disable tab marks, etc.}
repeat @<Input and store tokens from the next line of the file@>;
until align_state=1000000;
cur_val:=def_ref; scanner_status:=normal; align_state:=s;
end;

@ @<Input and store tokens from the next line of the file@>=
begin_file_reading; name:=m+1;
if read_open[m]=closed then @<Input for \.{\\read} from the terminal@>
else if read_open[m]=just_open then @<Input the first line of |read_file[m]|@>
else @<Input the next line of |read_file[m]|@>;
limit:=last;
if end_line_char_inactive then decr(limit)
else  buffer[limit]:=end_line_char;
first:=limit+1; loc:=start; state:=new_line;@/
loop@+  begin get_token;
  if cur_tok=0 then goto done;
    {|cur_cmd=cur_chr=0| will occur at the end of the line}
  if align_state<1000000 then {unmatched `\.\}' aborts the line}
    begin repeat get_token; until cur_tok=0;
    align_state:=1000000; goto done;
    end;
  store_new_token(cur_tok);
  end;
done: end_file_reading

@ Here we input on-line into the |buffer| array, prompting the user explicitly
if |n>=0|.  The value of |n| is set negative so that additional prompts
will not be given in the case of multi-line input.

@<Input for \.{\\read} from the terminal@>=
if interaction>nonstop_mode then
  if n<0 then prompt_input("")
  else  begin wake_up_terminal;
    print_ln; sprint_cs(r); prompt_input("="); n:=-1;
    end
else fatal_error("*** (cannot \read from terminal in nonstop modes)")
@.cannot \\read@>

@ The first line of a file must be treated specially, since |input_ln|
must be told not to start with |get|.
@^system dependencies@>

@<Input the first line of |read_file[m]|@>=
if input_ln(read_file[m],false) then read_open[m]:=normal
else  begin a_close(read_file[m]); read_open[m]:=closed;
  end

@ An empty line is appended at the end of a |read_file|.
@^empty line at end of file@>

@<Input the next line of |read_file[m]|@>=
begin if not input_ln(read_file[m],true) then
  begin a_close(read_file[m]); read_open[m]:=closed;
  if align_state<>1000000 then
    begin runaway;
    print_err("File ended within "); print_esc("read");
@.File ended within \\read@>
    help1("This \read has unbalanced braces.");
    align_state:=1000000; error;
    end;
  end;
end

@* \[28] Conditional processing.
We consider now the way \TeX\ handles various kinds of \.{\\if} commands.

@d if_char_code=0 { `\.{\\if}' }
@d if_cat_code=1 { `\.{\\ifcat}' }
@d if_int_code=2 { `\.{\\ifnum}' }
@d if_dim_code=3 { `\.{\\ifdim}' }
@d if_odd_code=4 { `\.{\\ifodd}' }
@d if_vmode_code=5 { `\.{\\ifvmode}' }
@d if_hmode_code=6 { `\.{\\ifhmode}' }
@d if_mmode_code=7 { `\.{\\ifmmode}' }
@d if_inner_code=8 { `\.{\\ifinner}' }
@d if_void_code=9 { `\.{\\ifvoid}' }
@d if_hbox_code=10 { `\.{\\ifhbox}' }
@d if_vbox_code=11 { `\.{\\ifvbox}' }
@d ifx_code=12 { `\.{\\ifx}' }
@d if_eof_code=13 { `\.{\\ifeof}' }
@d if_true_code=14 { `\.{\\iftrue}' }
@d if_false_code=15 { `\.{\\iffalse}' }
@d if_case_code=16 { `\.{\\ifcase}' }

@<Put each...@>=
primitive("if",if_test,if_char_code);
@!@:if_char_}{\.{\\if} primitive@>
primitive("ifcat",if_test,if_cat_code);
@!@:if_cat_code_}{\.{\\ifcat} primitive@>
primitive("ifnum",if_test,if_int_code);
@!@:if_int_}{\.{\\ifnum} primitive@>
primitive("ifdim",if_test,if_dim_code);
@!@:if_dim_}{\.{\\ifdim} primitive@>
primitive("ifodd",if_test,if_odd_code);
@!@:if_odd_}{\.{\\ifodd} primitive@>
primitive("ifvmode",if_test,if_vmode_code);
@!@:if_vmode_}{\.{\\ifvmode} primitive@>
primitive("ifhmode",if_test,if_hmode_code);
@!@:if_hmode_}{\.{\\ifhmode} primitive@>
primitive("ifmmode",if_test,if_mmode_code);
@!@:if_mmode_}{\.{\\ifmmode} primitive@>
primitive("ifinner",if_test,if_inner_code);
@!@:if_inner_}{\.{\\ifinner} primitive@>
primitive("ifvoid",if_test,if_void_code);
@!@:if_void_}{\.{\\ifvoid} primitive@>
primitive("ifhbox",if_test,if_hbox_code);
@!@:if_hbox_}{\.{\\ifhbox} primitive@>
primitive("ifvbox",if_test,if_vbox_code);
@!@:if_vbox_}{\.{\\ifvbox} primitive@>
primitive("ifx",if_test,ifx_code);
@!@:ifx_}{\.{\\ifx} primitive@>
primitive("ifeof",if_test,if_eof_code);
@!@:if_eof_}{\.{\\ifeof} primitive@>
primitive("iftrue",if_test,if_true_code);
@!@:if_true_}{\.{\\iftrue} primitive@>
primitive("iffalse",if_test,if_false_code);
@!@:if_false_}{\.{\\iffalse} primitive@>
primitive("ifcase",if_test,if_case_code);
@!@:if_case_}{\.{\\ifcase} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
if_test: case chr_code of
  if_cat_code:print_esc("ifcat");
  if_int_code:print_esc("ifnum");
  if_dim_code:print_esc("ifdim");
  if_odd_code:print_esc("ifodd");
  if_vmode_code:print_esc("ifvmode");
  if_hmode_code:print_esc("ifhmode");
  if_mmode_code:print_esc("ifmmode");
  if_inner_code:print_esc("ifinner");
  if_void_code:print_esc("ifvoid");
  if_hbox_code:print_esc("ifhbox");
  if_vbox_code:print_esc("ifvbox");
  ifx_code:print_esc("ifx");
  if_eof_code:print_esc("ifeof");
  if_true_code:print_esc("iftrue");
  if_false_code:print_esc("iffalse");
  if_case_code:print_esc("ifcase");
  othercases print_esc("if")
  endcases;

@ Conditions can be inside conditions, and this nesting has a stack
that is independent of the |save_stack|.

Four global variables represent the top of the condition stack:
|cond_ptr| points to pushed-down entries, if any; |if_limit| specifies
the largest code of a |fi_or_else| command that is syntactically legal;
|cur_if| is the name of the current type of conditional; and |if_line|
is the line number at which it began.

If no conditions are currently in progress, the condition stack has the
special state |cond_ptr=null|, |if_limit=normal|, |cur_if=0|, |if_line=0|.
Otherwise |cond_ptr| points to a two-word node; the |type|, |subtype|, and
|link| fields of the first word contain |if_limit|, |cur_if|, and
|cond_ptr| at the next level, and the second word contains the
corresponding |if_line|.

@d if_node_size=2 {number of words in stack entry for conditionals}
@d if_line_field(#)==mem[#+1].int
@d if_code=1 {code for \.{\\if...} being evaluated}
@d fi_code=2 {code for \.{\\fi}}
@d else_code=3 {code for \.{\\else}}
@d or_code=4 {code for \.{\\or}}

@<Glob...@>=
@!cond_ptr:pointer; {top of the condition stack}
@!if_limit:normal..or_code; {upper bound on |fi_or_else| codes}
@!cur_if:small_number; {type of conditional being worked on}
@!if_line:integer; {line where that conditional began}

@ @<Set init...@>=
cond_ptr:=null; if_limit:=normal; cur_if:=0; if_line:=0;

@ @<Put each...@>=
primitive("fi",fi_or_else,fi_code);
@!@:fi_}{\.{\\fi} primitive@>
text(frozen_fi):="fi"; eqtb[frozen_fi]:=eqtb[cur_val];
primitive("or",fi_or_else,or_code);
@!@:or_}{\.{\\or} primitive@>
primitive("else",fi_or_else,else_code);
@!@:else_}{\.{\\else} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
fi_or_else: if chr_code=fi_code then print_esc("fi")
  else if chr_code=or_code then print_esc("or")
  else print_esc("else");

@ When we skip conditional text, we keep track of the line number
where skipping began, for use in error messages.

@<Glob...@>=
@!skip_line:integer; {skipping began here}

@ Here is a procedure that ignores text until coming to an \.{\\or},
\.{\\else}, or \.{\\fi} at level zero of $\.{\\if}\ldots\.{\\fi}$
nesting. After it has acted, |cur_chr| will indicate the token that
was found, but |cur_tok| will not be set (because this makes the
procedure run faster).

@p procedure pass_text;
label done;
var l:integer; {level of $\.{\\if}\ldots\.{\\fi}$ nesting}
@!save_scanner_status:small_number; {|scanner_status| upon entry}
begin save_scanner_status:=scanner_status; scanner_status:=skipping; l:=0;
skip_line:=line;
loop@+  begin get_next;
  if cur_cmd=fi_or_else then
    begin if l=0 then goto done;
    if cur_chr=fi_code then decr(l);
    end
  else if cur_cmd=if_test then incr(l);
  end;
done: scanner_status:=save_scanner_status;
end;

@ When we begin to process a new \.{\\if}, we set |if_limit:=if_code|; then
if\/ \.{\\or} or \.{\\else} or \.{\\fi} occurs before the current \.{\\if}
condition has been evaluated, \.{\\relax} will be inserted.
For example, a sequence of commands like `\.{\\ifvoid1\\else...\\fi}'
would otherwise require something after the `\.1'.

@<Push the condition stack@>=
begin p:=get_node(if_node_size); link(p):=cond_ptr; type(p):=if_limit;
subtype(p):=cur_if; if_line_field(p):=if_line;
cond_ptr:=p; cur_if:=cur_chr; if_limit:=if_code; if_line:=line;
end

@ @<Pop the condition stack@>=
begin p:=cond_ptr; if_line:=if_line_field(p);
cur_if:=subtype(p); if_limit:=type(p); cond_ptr:=link(p);
free_node(p,if_node_size);
end

@ Here's a procedure that changes the |if_limit| code corresponding to
a given value of |cond_ptr|.

@p procedure change_if_limit(@!l:small_number;@!p:pointer);
label exit;
var q:pointer;
begin if p=cond_ptr then if_limit:=l {that's the easy case}
else  begin q:=cond_ptr;
  loop@+  begin if q=null then confusion("if");
@:this can't happen if}{\quad if@>
    if link(q)=p then
      begin type(q):=l; return;
      end;
    q:=link(q);
    end;
  end;
exit:end;

@ A condition is started when the |expand| procedure encounters
an |if_test| command; in that case |expand| reduces to |conditional|,
which is a recursive procedure.
@^recursion@>

@p procedure conditional;
label exit,common_ending;
var b:boolean; {is the condition true?}
@!r:"<"..">"; {relation to be evaluated}
@!m,@!n:integer; {to be tested against the second operand}
@!p,@!q:pointer; {for traversing token lists in \.{\\ifx} tests}
@!save_scanner_status:small_number; {|scanner_status| upon entry}
@!save_cond_ptr:pointer; {|cond_ptr| corresponding to this conditional}
@!this_if:small_number; {type of this conditional}
begin @<Push the condition stack@>;@+save_cond_ptr:=cond_ptr;this_if:=cur_chr;@/
@<Either process \.{\\ifcase} or set |b| to the value of a boolean condition@>;
if tracing_commands>1 then @<Display the value of |b|@>;
if b then
  begin change_if_limit(else_code,save_cond_ptr);
  return; {wait for \.{\\else} or \.{\\fi}}
  end;
@<Skip to \.{\\else} or \.{\\fi}, then |goto common_ending|@>;
common_ending: if cur_chr=fi_code then @<Pop the condition stack@>
else if_limit:=fi_code; {wait for \.{\\fi}}
exit:end;

@ In a construction like `\.{\\if\\iftrue abc\\else d\\fi}', the first
\.{\\else} that we come to after learning that the \.{\\if} is false is
not the \.{\\else} we're looking for. Hence the following curious
logic is needed.

@ @<Skip to \.{\\else} or \.{\\fi}...@>=
loop@+  begin pass_text;
  if cond_ptr=save_cond_ptr then
    begin if cur_chr<>or_code then goto common_ending;
    print_err("Extra "); print_esc("or");
@.Extra \\or@>
    help1("I'm ignoring this; it doesn't match any \if.");
    error;
    end
  else if cur_chr=fi_code then @<Pop the condition stack@>;
  end

@ @<Either process \.{\\ifcase} or set |b|...@>=
case this_if of
if_char_code, if_cat_code: @<Test if two characters match@>;
if_int_code, if_dim_code: @<Test relation between integers or dimensions@>;
if_odd_code: @<Test if an integer is odd@>;
if_vmode_code: b:=(abs(mode)=vmode);
if_hmode_code: b:=(abs(mode)=hmode);
if_mmode_code: b:=(abs(mode)=mmode);
if_inner_code: b:=(mode<0);
if_void_code, if_hbox_code, if_vbox_code: @<Test box register status@>;
ifx_code: @<Test if two tokens match@>;
if_eof_code: begin scan_four_bit_int; b:=(read_open[cur_val]=closed);
  end;
if_true_code: b:=true;
if_false_code: b:=false;
if_case_code: @<Select the appropriate case
  and |return| or |goto common_ending|@>;
end {there are no other cases}

@ @<Display the value of |b|@>=
begin begin_diagnostic;
if b then print("{true}")@+else print("{false}");
end_diagnostic(false);
end

@ Here we use the fact that |"<"|, |"="|, and |">"| are consecutive ASCII
codes.
@^ASCII code@>

@<Test relation between integers or dimensions@>=
begin if this_if=if_int_code then scan_int@+else scan_normal_dimen;
n:=cur_val; @<Get the next non-blank non-call...@>;
if (cur_tok>=other_token+"<")and(cur_tok<=other_token+">") then
  r:=cur_tok-other_token
else  begin print_err("Missing = inserted for ");
@.Missing = inserted@>
  print_cmd_chr(if_test,this_if);
  help1("I was expecting to see `<', `=', or `>'. Didn't.");
  back_error; r:="=";
  end;
if this_if=if_int_code then scan_int@+else scan_normal_dimen;
case r of
"<": b:=(n<cur_val);
"=": b:=(n=cur_val);
">": b:=(n>cur_val);
end;
end

@ @<Test if an integer is odd@>=
begin scan_int; b:=odd(cur_val);
end

@ @<Test box register status@>=
begin scan_eight_bit_int; p:=box(cur_val);
if this_if=if_void_code then b:=(p=null)
else if p=null then b:=false
else if this_if=if_hbox_code then b:=(type(p)=hlist_node)
else b:=(type(p)=vlist_node);
end

@ An active character will be treated as category 13 following
\.{\\if\\noexpand} or following \.{\\ifcat\\noexpand}. We use the fact that
active characters have the smallest tokens, among all control sequences.

@d get_x_token_or_active_char==@t@>@;
  begin get_x_token;
  if cur_cmd=relax then if cur_chr=no_expand_flag then
    begin cur_cmd:=active_char;
    cur_chr:=cur_tok-cs_token_flag-active_base;
    end;
  end

@<Test if two characters match@>=
begin get_x_token_or_active_char;
if (cur_cmd>active_char)or(cur_chr>255) then {not a character}
  begin m:=relax; n:=256;
  end
else  begin m:=cur_cmd; n:=cur_chr;
  end;
get_x_token_or_active_char;
if (cur_cmd>active_char)or(cur_chr>255) then
  begin cur_cmd:=relax; cur_chr:=256;
  end;
if this_if=if_char_code then b:=(n=cur_chr)@+else b:=(m=cur_cmd);
end

@ Note that `\.{\\ifx}' will declare two macros different if one is \\{long}
or \\{outer} and the other isn't, even though the texts of the macros are
the same.

We need to reset |scanner_status|, since \.{\\outer} control sequences
are allowed, but we might be scanning a macro definition or preamble.

@<Test if two tokens match@>=
begin save_scanner_status:=scanner_status; scanner_status:=normal;
get_next; n:=cur_cs; p:=cur_cmd; q:=cur_chr;
get_next; if cur_cmd<>p then b:=false
else if cur_cmd<call then b:=(cur_chr=q)
else @<Test if two macro texts match@>;
scanner_status:=save_scanner_status;
end

@ Note also that `\.{\\ifx}' decides that macros \.{\\a} and \.{\\b} are
different in examples like this:
$$\vbox{\halign{\.{#}\hfil&\qquad\.{#}\hfil\cr
  {}\\def\\a\{\\c\}&
  {}\\def\\c\{\}\cr
  {}\\def\\b\{\\d\}&
  {}\\def\\d\{\}\cr}}$$

@<Test if two macro texts match@>=
begin p:=link(cur_chr); q:=link(equiv(n)); {omit reference counts}
if p=q then b:=true
else begin while (p<>null)and(q<>null) do
    if info(p)<>info(q) then p:=null
    else  begin p:=link(p); q:=link(q);
      end;
  b:=((p=null)and(q=null));
  end;
end

@ @<Select the appropriate case and |return| or |goto common_ending|@>=
begin scan_int; n:=cur_val; {|n| is the number of cases to pass}
if tracing_commands>1 then
  begin begin_diagnostic; print("{case "); print_int(n); print_char("}");
  end_diagnostic(false);
  end;
while n<>0 do
  begin pass_text;
  if cond_ptr=save_cond_ptr then
    if cur_chr=or_code then decr(n)
    else goto common_ending
  else if cur_chr=fi_code then @<Pop the condition stack@>;
  end;
change_if_limit(or_code,save_cond_ptr);
return; {wait for \.{\\or}, \.{\\else}, or \.{\\fi}}
end

@ The processing of conditionals is complete except for the following
code, which is actually part of |expand|. It comes into play when
\.{\\or}, \.{\\else}, or \.{\\fi} is scanned.

@<Terminate the current conditional and skip to \.{\\fi}@>=
if cur_chr>if_limit then
  if if_limit=if_code then insert_relax {condition not yet evaluated}
  else  begin print_err("Extra "); print_cmd_chr(fi_or_else,cur_chr);
@.Extra \\or@>
@.Extra \\else@>
@.Extra \\fi@>
    help1("I'm ignoring this; it doesn't match any \if.");
    error;
    end
else  begin while cur_chr<>fi_code do pass_text; {skip to \.{\\fi}}
  @<Pop the condition stack@>;
  end

@* \[29] File names.
It's time now to fret about file names.  Besides the fact that different
operating systems treat files in different ways, we must cope with the
fact that completely different naming conventions are used by different
groups of people. The following programs show what is required for one
particular operating system; similar routines for other systems are not
difficult to devise.
@^fingers@>
@^system dependencies@>

\TeX\ assumes that a file name has three parts: the name proper; its
``extension''; and a ``file area'' where it is found in an external file
system.  The extension of an input file or a write file is assumed to be
`\.{.tex}' unless otherwise specified; it is `\.{.log}' on the
transcript file that records each run of \TeX; it is `\.{.tfm}' on the font
metric files that describe characters in the fonts \TeX\ uses; it is
`\.{.dvi}' on the output files that specify typesetting information; and it
is `\.{.fmt}' on the format files written by \.{INITEX} to initialize \TeX.
The file area can be arbitrary on input files, but files are usually
output to the user's current area.  If an input file cannot be
found on the specified area, \TeX\ will look for it on a special system
area; this special area is intended for commonly used input files like
\.{webmac.tex}.

Simple uses of \TeX\ refer only to file names that have no explicit
extension or area. For example, a person usually says `\.{\\input} \.{paper}'
or `\.{\\font\\tenrm} \.= \.{helvetica}' instead of `\.{\\input}
\.{paper.new}' or `\.{\\font\\tenrm} \.= \.{<csd.knuth>test}'. Simple file
names are best, because they make the \TeX\ source files portable;
whenever a file name consists entirely of letters and digits, it should be
treated in the same way by all implementations of \TeX. However, users
need the ability to refer to other files in their environment, especially
when responding to error messages concerning unopenable files; therefore
we want to let them use the syntax that appears in their favorite
operating system.

The following procedures don't allow spaces to be part of
file names; but some users seem to like names that are spaced-out.
System-dependent changes to allow such things should probably
be made with reluctance, and only when an entire file name that
includes spaces is ``quoted'' somehow.

@ In order to isolate the system-dependent aspects of file names, the
@^system dependencies@>
system-independent parts of \TeX\ are expressed in terms
of three system-dependent
procedures called |begin_name|, |more_name|, and |end_name|. In
essence, if the user-specified characters of the file name are $c_1\ldots c_n$,
the system-independent driver program does the operations
$$|begin_name|;\,|more_name|(c_1);\,\ldots\,;|more_name|(c_n);
\,|end_name|.$$
These three procedures communicate with each other via global variables.
Afterwards the file name will appear in the string pool as three strings
called |cur_name|\penalty10000\hskip-.05em,
|cur_area|, and |cur_ext|; the latter two are null (i.e.,
|""|), unless they were explicitly specified by the user.

Actually the situation is slightly more complicated, because \TeX\ needs
to know when the file name ends. The |more_name| routine is a function
(with side effects) that returns |true| on the calls |more_name|$(c_1)$,
\dots, |more_name|$(c_{n-1})$. The final call |more_name|$(c_n)$
returns |false|; or, it returns |true| and the token following $c_n$ is
something like `\.{\\hbox}' (i.e., not a character). In other words,
|more_name| is supposed to return |true| unless it is sure that the
file name has been completely scanned; and |end_name| is supposed to be able
to finish the assembly of |cur_name|, |cur_area|, and |cur_ext| regardless of
whether $|more_name|(c_n)$ returned |true| or |false|.

@<Glob...@>=
@!cur_name:str_number; {name of file just scanned}
@!cur_area:str_number; {file area just scanned, or \.{""}}
@!cur_ext:str_number; {file extension just scanned, or \.{""}}

@ The file names we shall deal with for illustrative purposes have the
following structure:  If the name contains `\.>' or `\.:', the file area
consists of all characters up to and including the final such character;
otherwise the file area is null.  If the remaining file name contains
`\..', the file extension consists of all such characters from the first
remaining `\..' to the end, otherwise the file extension is null.
@^system dependencies@>

We can scan such file names easily by using two global variables that keep track
of the occurrences of area and extension delimiters:

@<Glob...@>=
@!area_delimiter:pool_pointer; {the most recent `\.>' or `\.:', if any}
@!ext_delimiter:pool_pointer; {the relevant `\..', if any}

@ Input files that can't be found in the user's area may appear in a standard
system area called |TEX_area|. Font metric files whose areas are not given
explicitly are assumed to appear in a standard system area called
|TEX_font_area|.  These system area names will, of course, vary from place
to place.
@^system dependencies@>

@d TEX_area=="TeXinputs:"
@.TeXinputs@>
@d TEX_font_area=="TeXfonts:"
@.TeXfonts@>

@ Here now is the first of the system-dependent routines for file name scanning.
@^system dependencies@>

@p procedure begin_name;
begin area_delimiter:=0; ext_delimiter:=0;
end;

@ And here's the second. The string pool might change as the file name is
being scanned, since a new \.{\\csname} might be entered; therefore we keep
|area_delimiter| and |ext_delimiter| relative to the beginning of the current
string, instead of assigning an absolute address like |pool_ptr| to them.
@^system dependencies@>

@p function more_name(@!c:ASCII_code):boolean;
begin if c=" " then more_name:=false
else  begin str_room(1); append_char(c); {contribute |c| to the current string}
  if (c=">")or(c=":") then
    begin area_delimiter:=cur_length; ext_delimiter:=0;
    end
  else if (c=".")and(ext_delimiter=0) then ext_delimiter:=cur_length;
  more_name:=true;
  end;
end;

@ The third.
@^system dependencies@>

@p procedure end_name;
begin if str_ptr+3>max_strings then
  overflow("number of strings",max_strings-init_str_ptr);
@:TeX capacity exceeded number of strings}{\quad number of strings@>
if area_delimiter=0 then cur_area:=""
else  begin cur_area:=str_ptr;
  str_start[str_ptr+1]:=str_start[str_ptr]+area_delimiter; incr(str_ptr);
  end;
if ext_delimiter=0 then
  begin cur_ext:=""; cur_name:=make_string;
  end
else  begin cur_name:=str_ptr;
  str_start[str_ptr+1]:=str_start[str_ptr]+ext_delimiter-area_delimiter-1;
  incr(str_ptr); cur_ext:=make_string;
  end;
end;

@ Conversely, here is a routine that takes three strings and prints a file
name that might have produced them. (The routine is system dependent, because
some operating systems put the file area last instead of first.)
@^system dependencies@>

@<Basic printing...@>=
procedure print_file_name(@!n,@!a,@!e:integer);
begin slow_print(a); slow_print(n); slow_print(e);
end;

@ Another system-dependent routine is needed to convert three internal
\TeX\ strings
into the |name_of_file| value that is used to open files. The present code
allows both lowercase and uppercase letters in the file name.
@^system dependencies@>

@d append_to_name(#)==begin c:=#; incr(k);
  if k<=file_name_size then name_of_file[k]:=xchr[c];
  end

@p procedure pack_file_name(@!n,@!a,@!e:str_number);
var k:integer; {number of positions filled in |name_of_file|}
@!c: ASCII_code; {character being packed}
@!j:pool_pointer; {index into |str_pool|}
begin k:=0;
for j:=str_start[a] to str_start[a+1]-1 do append_to_name(so(str_pool[j]));
for j:=str_start[n] to str_start[n+1]-1 do append_to_name(so(str_pool[j]));
for j:=str_start[e] to str_start[e+1]-1 do append_to_name(so(str_pool[j]));
if k<=file_name_size then name_length:=k@+else name_length:=file_name_size;
for k:=name_length+1 to file_name_size do name_of_file[k]:=' ';
end;

@ A messier routine is also needed, since format file names must be scanned
before \TeX's string mechanism has been initialized. We shall use the
global variable |TEX_format_default| to supply the text for default system areas
and extensions related to format files.
@^system dependencies@>

@d format_default_length=20 {length of the |TEX_format_default| string}
@d format_area_length=11 {length of its area part}
@d format_ext_length=4 {length of its `\.{.fmt}' part}
@d format_extension=".fmt" {the extension, as a \.{WEB} constant}

@<Glob...@>=
@!TEX_format_default:packed array[1..format_default_length] of char;

@ @<Set init...@>=
TEX_format_default:='TeXformats:plain.fmt';
@.TeXformats@>
@.plain@>
@^system dependencies@>

@ @<Check the ``constant'' values for consistency@>=
if format_default_length>file_name_size then bad:=31;

@ Here is the messy routine that was just mentioned. It sets |name_of_file|
from the first |n| characters of |TEX_format_default|, followed by
|buffer[a..b]|, followed by the last |format_ext_length| characters of
|TEX_format_default|.

We dare not give error messages here, since \TeX\ calls this routine before
the |error| routine is ready to roll. Instead, we simply drop excess characters,
since the error will be detected in another way when a strange file name
isn't found.
@^system dependencies@>

@p procedure pack_buffered_name(@!n:small_number;@!a,@!b:integer);
var k:integer; {number of positions filled in |name_of_file|}
@!c: ASCII_code; {character being packed}
@!j:integer; {index into |buffer| or |TEX_format_default|}
begin if n+b-a+1+format_ext_length>file_name_size then
  b:=a+file_name_size-n-1-format_ext_length;
k:=0;
for j:=1 to n do append_to_name(xord[TEX_format_default[j]]);
for j:=a to b do append_to_name(buffer[j]);
for j:=format_default_length-format_ext_length+1 to format_default_length do
  append_to_name(xord[TEX_format_default[j]]);
if k<=file_name_size then name_length:=k@+else name_length:=file_name_size;
for k:=name_length+1 to file_name_size do name_of_file[k]:=' ';
end;

@ Here is the only place we use |pack_buffered_name|. This part of the program
becomes active when a ``virgin'' \TeX\ is trying to get going, just after
the preliminary initialization, or when the user is substituting another
format file by typing `\.\&' after the initial `\.{**}' prompt.  The buffer
contains the first line of input in |buffer[loc..(last-1)]|, where
|loc<last| and |buffer[loc]<>" "|.

@<Declare the function called |open_fmt_file|@>=
function open_fmt_file:boolean;
label found,exit;
var j:0..buf_size; {the first space after the format file name}
begin j:=loc;
if buffer[loc]="&" then
  begin incr(loc); j:=loc; buffer[last]:=" ";
  while buffer[j]<>" " do incr(j);
  pack_buffered_name(0,loc,j-1); {try first without the system file area}
  if w_open_in(fmt_file) then goto found;
  pack_buffered_name(format_area_length,loc,j-1);
    {now try the system format file area}
  if w_open_in(fmt_file) then goto found;
  wake_up_terminal;
  wterm_ln('Sorry, I can''t find that format;',' will try PLAIN.');
@.Sorry, I can't find...@>
  update_terminal;
  end;
  {now pull out all the stops: try for the system \.{plain} file}
pack_buffered_name(format_default_length-format_ext_length,1,0);
if not w_open_in(fmt_file) then
  begin wake_up_terminal;
  wterm_ln('I can''t find the PLAIN format file!');
@.I can't find PLAIN...@>
@.plain@>
  open_fmt_file:=false; return;
  end;
found:loc:=j; open_fmt_file:=true;
exit:end;

@ Operating systems often make it possible to determine the exact name (and
possible version number) of a file that has been opened. The following routine,
which simply makes a \TeX\ string from the value of |name_of_file|, should
ideally be changed to deduce the full name of file~|f|, which is the file
most recently opened, if it is possible to do this in a \PASCAL\ program.
@^system dependencies@>

This routine might be called after string memory has overflowed, hence
we dare not use `|str_room|'.

@p function make_name_string:str_number;
var k:1..file_name_size; {index into |name_of_file|}
begin if (pool_ptr+name_length>pool_size)or(str_ptr=max_strings)or
 (cur_length>0) then
  make_name_string:="?"
else  begin for k:=1 to name_length do append_char(xord[name_of_file[k]]);
  make_name_string:=make_string;
  end;
end;
function a_make_name_string(var f:alpha_file):str_number;
begin a_make_name_string:=make_name_string;
end;
function b_make_name_string(var f:byte_file):str_number;
begin b_make_name_string:=make_name_string;
end;
function w_make_name_string(var f:word_file):str_number;
begin w_make_name_string:=make_name_string;
end;

@ Now let's consider the ``driver''
routines by which \TeX\ deals with file names
in a system-independent manner.  First comes a procedure that looks for a
file name in the input by calling |get_x_token| for the information.

@p procedure scan_file_name;
label done;
begin name_in_progress:=true; begin_name;
@<Get the next non-blank non-call...@>;
loop@+begin if (cur_cmd>other_char)or(cur_chr>255) then {not a character}
    begin back_input; goto done;
    end;
  if not more_name(cur_chr) then goto done;
  get_x_token;
  end;
done: end_name; name_in_progress:=false;
end;

@ The global variable |name_in_progress| is used to prevent recursive
use of |scan_file_name|, since the |begin_name| and other procedures
communicate via global variables. Recursion would arise only by
devious tricks like `\.{\\input\\input f}'; such attempts at sabotage
must be thwarted. Furthermore, |name_in_progress| prevents \.{\\input}
@^recursion@>
from being initiated when a font size specification is being scanned.

Another global variable, |job_name|, contains the file name that was first
\.{\\input} by the user. This name is extended by `\.{.log}' and `\.{.dvi}'
and `\.{.fmt}' in the names of \TeX's output files.

@<Glob...@>=
@!name_in_progress:boolean; {is a file name being scanned?}
@!job_name:str_number; {principal file name}
@!log_opened:boolean; {has the transcript file been opened?}

@ Initially |job_name=0|; it becomes nonzero as soon as the true name is known.
We have |job_name=0| if and only if the `\.{log}' file has not been opened,
except of course for a short time just after |job_name| has become nonzero.

@<Initialize the output...@>=
job_name:=0; name_in_progress:=false; log_opened:=false;

@ Here is a routine that manufactures the output file names, assuming that
|job_name<>0|. It ignores and changes the current settings of |cur_area|
and |cur_ext|.

@d pack_cur_name==pack_file_name(cur_name,cur_area,cur_ext)

@p procedure pack_job_name(@!s:str_number); {|s = ".log"|, |".dvi"|, or
  |format_extension|}
begin cur_area:=""; cur_ext:=s;
cur_name:=job_name; pack_cur_name;
end;

@ If some trouble arises when \TeX\ tries to open a file, the following
routine calls upon the user to supply another file name. Parameter~|s|
is used in the error message to identify the type of file; parameter~|e|
is the default extension if none is given. Upon exit from the routine,
variables |cur_name|, |cur_area|, |cur_ext|, and |name_of_file| are
ready for another attempt at file opening.

@p procedure prompt_file_name(@!s,@!e:str_number);
label done;
var k:0..buf_size; {index into |buffer|}
begin if interaction=scroll_mode then wake_up_terminal;
if s="input file name" then print_err("I can't find file `")
@.I can't find file x@>
else print_err("I can't write on file `");
@.I can't write on file x@>
print_file_name(cur_name,cur_area,cur_ext); print("'.");
if e=".tex" then show_context;
print_nl("Please type another "); print(s);
@.Please type...@>
if interaction<scroll_mode then
  fatal_error("*** (job aborted, file error in nonstop mode)");
@.job aborted, file error...@>
clear_terminal; prompt_input(": "); @<Scan file name in the buffer@>;
if cur_ext="" then cur_ext:=e;
pack_cur_name;
end;

@ @<Scan file name in the buffer@>=
begin begin_name; k:=first;
while (buffer[k]=" ")and(k<last) do incr(k);
loop@+  begin if k=last then goto done;
  if not more_name(buffer[k]) then goto done;
  incr(k);
  end;
done:end_name;
end

@ Here's an example of how these conventions are used. Whenever it is time to
ship out a box of stuff, we shall use the macro |ensure_dvi_open|.

@d ensure_dvi_open==if output_file_name=0 then
  begin if job_name=0 then open_log_file;
  pack_job_name(".dvi");
  while not b_open_out(dvi_file) do
    prompt_file_name("file name for output",".dvi");
  output_file_name:=b_make_name_string(dvi_file);
  end

@<Glob...@>=
@!dvi_file: byte_file; {the device-independent output goes here}
@!output_file_name: str_number; {full name of the output file}
@!log_name:str_number; {full name of the log file}

@ @<Initialize the output...@>=output_file_name:=0;

@ The |open_log_file| routine is used to open the transcript file and to help
it catch up to what has previously been printed on the terminal.

@p procedure open_log_file;
var old_setting:0..max_selector; {previous |selector| setting}
@!k:0..buf_size; {index into |months| and |buffer|}
@!l:0..buf_size; {end of first input line}
@!months:packed array [1..36] of char; {abbreviations of month names}
begin old_setting:=selector;
if job_name=0 then job_name:="texput";
@.texput@>
pack_job_name(".log");
while not a_open_out(log_file) do @<Try to get a different log file name@>;
log_name:=a_make_name_string(log_file);
selector:=log_only; log_opened:=true;
@<Print the banner line, including the date and time@>;
input_stack[input_ptr]:=cur_input; {make sure bottom level is in memory}
print_nl("**");
@.**@>
l:=input_stack[0].limit_field; {last position of first line}
if buffer[l]=end_line_char then decr(l);
for k:=1 to l do print(buffer[k]);
print_ln; {now the transcript file contains the first line of input}
selector:=old_setting+2; {|log_only| or |term_and_log|}
end;

@ Sometimes |open_log_file| is called at awkward moments when \TeX\ is
unable to print error messages or even to |show_context|.
The |prompt_file_name| routine can result in a |fatal_error|, but the |error|
routine will not be invoked because |log_opened| will be false.

The normal idea of |batch_mode| is that nothing at all should be written
on the terminal. However, in the unusual case that
no log file could be opened, we make an exception and allow
an explanatory message to be seen.

Incidentally, the program always refers to the log file as a `\.{transcript
file}', because some systems cannot use the extension `\.{.log}' for
this file.

@<Try to get a different log file name@>=
begin selector:=term_only;
prompt_file_name("transcript file name",".log");
end

@ @<Print the banner...@>=
begin wlog(banner);
slow_print(format_ident); print("  ");
print_int(day); print_char(" ");
months:='JANFEBMARAPRMAYJUNJULAUGSEPOCTNOVDEC';
for k:=3*month-2 to 3*month do wlog(months[k]);
print_char(" "); print_int(year); print_char(" ");
print_two(time div 60); print_char(":"); print_two(time mod 60);
end

@ Let's turn now to the procedure that is used to initiate file reading
when an `\.{\\input}' command is being processed.

@p procedure start_input; {\TeX\ will \.{\\input} something}
label done;
begin scan_file_name; {set |cur_name| to desired file name}
if cur_ext="" then cur_ext:=".tex";
pack_cur_name;
loop@+  begin begin_file_reading; {set up |cur_file| and new level of input}
  if a_open_in(cur_file) then goto done;
  if cur_area="" then
    begin pack_file_name(cur_name,TEX_area,cur_ext);
    if a_open_in(cur_file) then goto done;
    end;
  end_file_reading; {remove the level that didn't work}
  prompt_file_name("input file name",".tex");
  end;
done: name:=a_make_name_string(cur_file);
if job_name=0 then
  begin job_name:=cur_name; open_log_file;
  end; {|open_log_file| doesn't |show_context|, so |limit|
    and |loc| needn't be set to meaningful values yet}
if term_offset+length(name)>max_print_line-2 then print_ln
else if (term_offset>0)or(file_offset>0) then print_char(" ");
print_char("("); incr(open_parens); slow_print(name); update_terminal;
state:=new_line;
if name=str_ptr-1 then {we can conserve string pool space now}
  begin flush_string; name:=cur_name;
  end;
@<Read the first line of the new file@>;
end;

@ Here we have to remember to tell the |input_ln| routine not to
start with a |get|. If the file is empty, it is considered to
contain a single blank line.
@^system dependencies@>
@^empty line at end of file@>

@<Read the first line...@>=
begin line:=1;
if input_ln(cur_file,false) then do_nothing;
firm_up_the_line;
if end_line_char_inactive then decr(limit)
else  buffer[limit]:=end_line_char;
first:=limit+1; loc:=start;
end

@* \[30] Font metric data.
\TeX\ gets its knowledge about fonts from font metric files, also called
\.{TFM} files; the `\.T' in `\.{TFM}' stands for \TeX,
but other programs know about them too.
@:TFM files}{\.{TFM} files@>
@^font metric files@>

The information in a \.{TFM} file appears in a sequence of 8-bit bytes.
Since the number of bytes is always a multiple of 4, we could
also regard the file as a sequence of 32-bit words, but \TeX\ uses the
byte interpretation. The format of \.{TFM} files was designed by
Lyle Ramshaw in 1980. The intent is to convey a lot of different kinds
@^Ramshaw, Lyle Harold@>
of information in a compact but useful form.

@<Glob...@>=
@!tfm_file:byte_file;

@ The first 24 bytes (6 words) of a \.{TFM} file contain twelve 16-bit
integers that give the lengths of the various subsequent portions
of the file. These twelve integers are, in order:
$$\vbox{\halign{\hfil#&$\null=\null$#\hfil\cr
|lf|&length of the entire file, in words;\cr
|lh|&length of the header data, in words;\cr
|bc|&smallest character code in the font;\cr
|ec|&largest character code in the font;\cr
|nw|&number of words in the width table;\cr
|nh|&number of words in the height table;\cr
|nd|&number of words in the depth table;\cr
|ni|&number of words in the italic correction table;\cr
|nl|&number of words in the lig/kern table;\cr
|nk|&number of words in the kern table;\cr
|ne|&number of words in the extensible character table;\cr
|np|&number of font parameter words.\cr}}$$
They are all nonnegative and less than $2^{15}$. We must have |bc-1<=ec<=255|,
and
$$\hbox{|lf=6+lh+(ec-bc+1)+nw+nh+nd+ni+nl+nk+ne+np|.}$$
Note that a font may contain as many as 256 characters (if |bc=0| and |ec=255|),
and as few as 0 characters (if |bc=ec+1|).

Incidentally, when two or more 8-bit bytes are combined to form an integer of
16 or more bits, the most significant bytes appear first in the file.
This is called BigEndian order.
@!@^BigEndian order@>

@ The rest of the \.{TFM} file may be regarded as a sequence of ten data
arrays having the informal specification
$$\def\arr$[#1]#2${\&{array} $[#1]$ \&{of} #2}
\vbox{\halign{\hfil\\{#}&$\,:\,$\arr#\hfil\cr
header&|[0..lh-1]@t\\{stuff}@>|\cr
char\_info&|[bc..ec]char_info_word|\cr
width&|[0..nw-1]fix_word|\cr
height&|[0..nh-1]fix_word|\cr
depth&|[0..nd-1]fix_word|\cr
italic&|[0..ni-1]fix_word|\cr
lig\_kern&|[0..nl-1]lig_kern_command|\cr
kern&|[0..nk-1]fix_word|\cr
exten&|[0..ne-1]extensible_recipe|\cr
param&|[1..np]fix_word|\cr}}$$
The most important data type used here is a |@!fix_word|, which is
a 32-bit representation of a binary fraction. A |fix_word| is a signed
quantity, with the two's complement of the entire word used to represent
negation. Of the 32 bits in a |fix_word|, exactly 12 are to the left of the
binary point; thus, the largest |fix_word| value is $2048-2^{-20}$, and
the smallest is $-2048$. We will see below, however, that all but two of
the |fix_word| values must lie between $-16$ and $+16$.

@ The first data array is a block of header information, which contains
general facts about the font. The header must contain at least two words,
|header[0]| and |header[1]|, whose meaning is explained below.
Additional header information of use to other software routines might
also be included, but \TeX82 does not need to know about such details.
For example, 16 more words of header information are in use at the Xerox
Palo Alto Research Center; the first ten specify the character coding
scheme used (e.g., `\.{XEROX text}' or `\.{TeX math symbols}'), the next five
give the font identifier (e.g., `\.{HELVETICA}' or `\.{CMSY}'), and the
last gives the ``face byte.'' The program that converts \.{DVI} files
to Xerox printing format gets this information by looking at the \.{TFM}
file, which it needs to read anyway because of other information that
is not explicitly repeated in \.{DVI}~format.

\yskip\hang|header[0]| is a 32-bit check sum that \TeX\ will copy into
the \.{DVI} output file. Later on when the \.{DVI} file is printed,
possibly on another computer, the actual font that gets used is supposed
to have a check sum that agrees with the one in the \.{TFM} file used by
\TeX. In this way, users will be warned about potential incompatibilities.
(However, if the check sum is zero in either the font file or the \.{TFM}
file, no check is made.)  The actual relation between this check sum and
the rest of the \.{TFM} file is not important; the check sum is simply an
identification number with the property that incompatible fonts almost
always have distinct check sums.
@^check sum@>

\yskip\hang|header[1]| is a |fix_word| containing the design size of
the font, in units of \TeX\ points. This number must be at least 1.0; it is
fairly arbitrary, but usually the design size is 10.0 for a ``10 point''
font, i.e., a font that was designed to look best at a 10-point size,
whatever that really means. When a \TeX\ user asks for a font
`\.{at} $\delta$ \.{pt}', the effect is to override the design size
and replace it by $\delta$, and to multiply the $x$ and~$y$ coordinates
of the points in the font image by a factor of $\delta$ divided by the
design size.  {\sl All other dimensions in the\/ \.{TFM} file are
|fix_word|\kern-1pt\ numbers in design-size units}, with the exception of
|param[1]| (which denotes the slant ratio). Thus, for example, the value
of |param[6]|, which defines the \.{em} unit, is often the |fix_word| value
$2^{20}=1.0$, since many fonts have a design size equal to one em.
The other dimensions must be less than 16 design-size units in absolute
value; thus, |header[1]| and |param[1]| are the only |fix_word|
entries in the whole \.{TFM} file whose first byte might be something
besides 0 or 255.

@ Next comes the |char_info| array, which contains one |@!char_info_word|
per character. Each word in this part of the file contains six fields
packed into four bytes as follows.

\yskip\hang first byte: |@!width_index| (8 bits)\par
\hang second byte: |@!height_index| (4 bits) times 16, plus |@!depth_index|
  (4~bits)\par
\hang third byte: |@!italic_index| (6 bits) times 4, plus |@!tag|
  (2~bits)\par
\hang fourth byte: |@!remainder| (8 bits)\par
\yskip\noindent
The actual width of a character is \\{width}|[width_index]|, in design-size
units; this is a device for compressing information, since many characters
have the same width. Since it is quite common for many characters
to have the same height, depth, or italic correction, the \.{TFM} format
imposes a limit of 16 different heights, 16 different depths, and
64 different italic corrections.

@!@^italic correction@>
The italic correction of a character has two different uses.
(a)~In ordinary text, the italic correction is added to the width only if
the \TeX\ user specifies `\.{\\/}' after the character.
(b)~In math formulas, the italic correction is always added to the width,
except with respect to the positioning of subscripts.

Incidentally, the relation $\\{width}[0]=\\{height}[0]=\\{depth}[0]=
\\{italic}[0]=0$ should always hold, so that an index of zero implies a
value of zero.  The |width_index| should never be zero unless the
character does not exist in the font, since a character is valid if and
only if it lies between |bc| and |ec| and has a nonzero |width_index|.

@ The |tag| field in a |char_info_word| has four values that explain how to
interpret the |remainder| field.

\yskip\hangg|tag=0| (|no_tag|) means that |remainder| is unused.\par
\hangg|tag=1| (|lig_tag|) means that this character has a ligature/kerning
program starting at position |remainder| in the |lig_kern| array.\par
\hangg|tag=2| (|list_tag|) means that this character is part of a chain of
characters of ascending sizes, and not the largest in the chain.  The
|remainder| field gives the character code of the next larger character.\par
\hangg|tag=3| (|ext_tag|) means that this character code represents an
extensible character, i.e., a character that is built up of smaller pieces
so that it can be made arbitrarily large. The pieces are specified in
|@!exten[remainder]|.\par
\yskip\noindent
Characters with |tag=2| and |tag=3| are treated as characters with |tag=0|
unless they are used in special circumstances in math formulas. For example,
the \.{\\sum} operation looks for a |list_tag|, and the \.{\\left}
operation looks for both |list_tag| and |ext_tag|.

@d no_tag=0 {vanilla character}
@d lig_tag=1 {character has a ligature/kerning program}
@d list_tag=2 {character has a successor in a charlist}
@d ext_tag=3 {character is extensible}

@ The |lig_kern| array contains instructions in a simple programming language
that explains what to do for special letter pairs. Each word in this array is a
|@!lig_kern_command| of four bytes.

\yskip\hang first byte: |skip_byte|, indicates that this is the final program
  step if the byte is 128 or more, otherwise the next step is obtained by
  skipping this number of intervening steps.\par
\hang second byte: |next_char|, ``if |next_char| follows the current character,
  then perform the operation and stop, otherwise continue.''\par
\hang third byte: |op_byte|, indicates a ligature step if less than~128,
  a kern step otherwise.\par
\hang fourth byte: |remainder|.\par
\yskip\noindent
In a kern step, an
additional space equal to |kern[256*(op_byte-128)+remainder]| is inserted
between the current character and |next_char|. This amount is
often negative, so that the characters are brought closer together
by kerning; but it might be positive.

There are eight kinds of ligature steps, having |op_byte| codes $4a+2b+c$ where
$0\le a\le b+c$ and $0\le b,c\le1$. The character whose code is
|remainder| is inserted between the current character and |next_char|;
then the current character is deleted if $b=0$, and |next_char| is
deleted if $c=0$; then we pass over $a$~characters to reach the next
current character (which may have a ligature/kerning program of its own).

If the very first instruction of the |lig_kern| array has |skip_byte=255|,
the |next_char| byte is the so-called right boundary character of this font;
the value of |next_char| need not lie between |bc| and~|ec|.
If the very last instruction of the |lig_kern| array has |skip_byte=255|,
there is a special ligature/kerning program for a left boundary character,
beginning at location |256*op_byte+remainder|.
The interpretation is that \TeX\ puts implicit boundary characters
before and after each consecutive string of characters from the same font.
These implicit characters do not appear in the output, but they can affect
ligatures and kerning.

If the very first instruction of a character's |lig_kern| program has
|skip_byte>128|, the program actually begins in location
|256*op_byte+remainder|. This feature allows access to large |lig_kern|
arrays, because the first instruction must otherwise
appear in a location |<=255|.

Any instruction with |skip_byte>128| in the |lig_kern| array must satisfy
the condition
$$\hbox{|256*op_byte+remainder<nl|.}$$
If such an instruction is encountered during
normal program execution, it denotes an unconditional halt; no ligature
or kerning command is performed.

@d stop_flag==qi(128) {value indicating `\.{STOP}' in a lig/kern program}
@d kern_flag==qi(128) {op code for a kern step}
@d skip_byte(#)==#.b0
@d next_char(#)==#.b1
@d op_byte(#)==#.b2
@d rem_byte(#)==#.b3

@ Extensible characters are specified by an |@!extensible_recipe|, which
consists of four bytes called |@!top|, |@!mid|, |@!bot|, and |@!rep| (in this
order). These bytes are the character codes of individual pieces used to
build up a large symbol.  If |top|, |mid|, or |bot| are zero, they are not
present in the built-up result. For example, an extensible vertical line is
like an extensible bracket, except that the top and bottom pieces are missing.

Let $T$, $M$, $B$, and $R$ denote the respective pieces, or an empty box
if the piece isn't present. Then the extensible characters have the form
$TR^kMR^kB$ from top to bottom, for some |k>=0|, unless $M$ is absent;
in the latter case we can have $TR^kB$ for both even and odd values of~|k|.
The width of the extensible character is the width of $R$; and the
height-plus-depth is the sum of the individual height-plus-depths of the
components used, since the pieces are butted together in a vertical list.

@d ext_top(#)==#.b0 {|top| piece in a recipe}
@d ext_mid(#)==#.b1 {|mid| piece in a recipe}
@d ext_bot(#)==#.b2 {|bot| piece in a recipe}
@d ext_rep(#)==#.b3 {|rep| piece in a recipe}

@ The final portion of a \.{TFM} file is the |param| array, which is another
sequence of |fix_word| values.

\yskip\hang|param[1]=slant| is the amount of italic slant, which is used
to help position accents. For example, |slant=.25| means that when you go
up one unit, you also go .25 units to the right. The |slant| is a pure
number; it's the only |fix_word| other than the design size itself that is
not scaled by the design size.

\hang|param[2]=space| is the normal spacing between words in text.
Note that character |" "| in the font need not have anything to do with
blank spaces.

\hang|param[3]=space_stretch| is the amount of glue stretching between words.

\hang|param[4]=space_shrink| is the amount of glue shrinking between words.

\hang|param[5]=x_height| is the size of one ex in the font; it is also
the height of letters for which accents don't have to be raised or lowered.

\hang|param[6]=quad| is the size of one em in the font.

\hang|param[7]=extra_space| is the amount added to |param[2]| at the
ends of sentences.

\yskip\noindent
If fewer than seven parameters are present, \TeX\ sets the missing parameters
to zero. Fonts used for math symbols are required to have
additional parameter information, which is explained later.

@d slant_code=1
@d space_code=2
@d space_stretch_code=3
@d space_shrink_code=4
@d x_height_code=5
@d quad_code=6
@d extra_space_code=7

@ So that is what \.{TFM} files hold. Since \TeX\ has to absorb such information
about lots of fonts, it stores most of the data in a large array called
|font_info|. Each item of |font_info| is a |memory_word|; the |fix_word|
data gets converted into |scaled| entries, while everything else goes into
words of type |four_quarters|.

When the user defines \.{\\font\\f}, say, \TeX\ assigns an internal number
to the user's font~\.{\\f}. Adding this number to |font_id_base| gives the
|eqtb| location of a ``frozen'' control sequence that will always select
the font.

@<Types...@>=
@!internal_font_number=font_base..font_max; {|font| in a |char_node|}
@!font_index=0..font_mem_size; {index into |font_info|}

@ Here now is the (rather formidable) array of font arrays.

@d non_char==qi(256) {a |halfword| code that can't match a real character}
@d non_address=0 {a spurious |bchar_label|}

@<Glob...@>=
@!font_info:array[font_index] of memory_word;
  {the big collection of font data}
@!fmem_ptr:font_index; {first unused word of |font_info|}
@!font_ptr:internal_font_number; {largest internal font number in use}
@!font_check:array[internal_font_number] of four_quarters; {check sum}
@!font_size:array[internal_font_number] of scaled; {``at'' size}
@!font_dsize:array[internal_font_number] of scaled; {``design'' size}
@!font_params:array[internal_font_number] of font_index; {how many font
  parameters are present}
@!font_name:array[internal_font_number] of str_number; {name of the font}
@!font_area:array[internal_font_number] of str_number; {area of the font}
@!font_bc:array[internal_font_number] of eight_bits;
  {beginning (smallest) character code}
@!font_ec:array[internal_font_number] of eight_bits;
  {ending (largest) character code}
@!font_glue:array[internal_font_number] of pointer;
  {glue specification for interword space, |null| if not allocated}
@!font_used:array[internal_font_number] of boolean;
  {has a character from this font actually appeared in the output?}
@!hyphen_char:array[internal_font_number] of integer;
  {current \.{\\hyphenchar} values}
@!skew_char:array[internal_font_number] of integer;
  {current \.{\\skewchar} values}
@!bchar_label:array[internal_font_number] of font_index;
  {start of |lig_kern| program for left boundary character,
  |non_address| if there is none}
@!font_bchar:array[internal_font_number] of min_quarterword..non_char;
  {right boundary character, |non_char| if there is none}
@!font_false_bchar:array[internal_font_number] of min_quarterword..non_char;
  {|font_bchar| if it doesn't exist in the font, otherwise |non_char|}

@ Besides the arrays just enumerated, we have directory arrays that make it
easy to get at the individual entries in |font_info|. For example, the
|char_info| data for character |c| in font |f| will be in
|font_info[char_base[f]+c].qqqq|; and if |w| is the |width_index|
part of this word (the |b0| field), the width of the character is
|font_info[width_base[f]+w].sc|. (These formulas assume that
|min_quarterword| has already been added to |c| and to |w|, since \TeX\
stores its quarterwords that way.)

@<Glob...@>=
@!char_base:array[internal_font_number] of integer;
  {base addresses for |char_info|}
@!width_base:array[internal_font_number] of integer;
  {base addresses for widths}
@!height_base:array[internal_font_number] of integer;
  {base addresses for heights}
@!depth_base:array[internal_font_number] of integer;
  {base addresses for depths}
@!italic_base:array[internal_font_number] of integer;
  {base addresses for italic corrections}
@!lig_kern_base:array[internal_font_number] of integer;
  {base addresses for ligature/kerning programs}
@!kern_base:array[internal_font_number] of integer;
  {base addresses for kerns}
@!exten_base:array[internal_font_number] of integer;
  {base addresses for extensible recipes}
@!param_base:array[internal_font_number] of integer;
  {base addresses for font parameters}

@ @<Set init...@>=
for k:=font_base to font_max do font_used[k]:=false;

@ \TeX\ always knows at least one font, namely the null font. It has no
characters, and its seven parameters are all equal to zero.

@<Initialize table...@>=
font_ptr:=null_font; fmem_ptr:=7;
font_name[null_font]:="nullfont"; font_area[null_font]:="";
hyphen_char[null_font]:="-"; skew_char[null_font]:=-1;
bchar_label[null_font]:=non_address;
font_bchar[null_font]:=non_char; font_false_bchar[null_font]:=non_char;
font_bc[null_font]:=1; font_ec[null_font]:=0;
font_size[null_font]:=0; font_dsize[null_font]:=0;
char_base[null_font]:=0; width_base[null_font]:=0;
height_base[null_font]:=0; depth_base[null_font]:=0;
italic_base[null_font]:=0; lig_kern_base[null_font]:=0;
kern_base[null_font]:=0; exten_base[null_font]:=0;
font_glue[null_font]:=null; font_params[null_font]:=7;
param_base[null_font]:=-1;
for k:=0 to 6 do font_info[k].sc:=0;

@ @<Put each...@>=
primitive("nullfont",set_font,null_font);
@!@:null_font_}{\.{\\nullfont} primitive@>
text(frozen_null_font):="nullfont"; eqtb[frozen_null_font]:=eqtb[cur_val];

@ Of course we want to define macros that suppress the detail of how font
information is actually packed, so that we don't have to write things like
$$\hbox{|font_info[width_base[f]+font_info[char_base[f]+c].qqqq.b0].sc|}$$
too often. The \.{WEB} definitions here make |char_info(f)(c)| the
|four_quarters| word of font information corresponding to character
|c| of font |f|. If |q| is such a word, |char_width(f)(q)| will be
the character's width; hence the long formula above is at least
abbreviated to
$$\hbox{|char_width(f)(char_info(f)(c))|.}$$
Usually, of course, we will fetch |q| first and look at several of its
fields at the same time.

The italic correction of a character will be denoted by
|char_italic(f)(q)|, so it is analogous to |char_width|.  But we will get
at the height and depth in a slightly different way, since we usually want
to compute both height and depth if we want either one.  The value of
|height_depth(q)| will be the 8-bit quantity
$$b=|height_index|\times16+|depth_index|,$$ and if |b| is such a byte we
will write |char_height(f)(b)| and |char_depth(f)(b)| for the height and
depth of the character |c| for which |q=char_info(f)(c)|. Got that?

The tag field will be called |char_tag(q)|; the remainder byte will be
called |rem_byte(q)|, using a macro that we have already defined above.

Access to a character's |width|, |height|, |depth|, and |tag| fields is
part of \TeX's inner loop, so we want these macros to produce code that is
as fast as possible under the circumstances.
@^inner loop@>

@d char_info_end(#)==#].qqqq
@d char_info(#)==font_info[char_base[#]+char_info_end
@d char_width_end(#)==#.b0].sc
@d char_width(#)==font_info[width_base[#]+char_width_end
@d char_exists(#)==(#.b0>min_quarterword)
@d char_italic_end(#)==(qo(#.b2)) div 4].sc
@d char_italic(#)==font_info[italic_base[#]+char_italic_end
@d height_depth(#)==qo(#.b1)
@d char_height_end(#)==(#) div 16].sc
@d char_height(#)==font_info[height_base[#]+char_height_end
@d char_depth_end(#)==(#) mod 16].sc
@d char_depth(#)==font_info[depth_base[#]+char_depth_end
@d char_tag(#)==((qo(#.b2)) mod 4)

@ The global variable |null_character| is set up to be a word of
|char_info| for a character that doesn't exist. Such a word provides a
convenient way to deal with erroneous situations.

@<Glob...@>=
@!null_character:four_quarters; {nonexistent character information}

@ @<Set init...@>=
null_character.b0:=min_quarterword; null_character.b1:=min_quarterword;
null_character.b2:=min_quarterword; null_character.b3:=min_quarterword;

@ Here are some macros that help process ligatures and kerns.
We write |char_kern(f)(j)| to find the amount of kerning specified by
kerning command~|j| in font~|f|. If |j| is the |char_info| for a character
with a ligature/kern program, the first instruction of that program is either
|i=font_info[lig_kern_start(f)(j)]| or |font_info[lig_kern_restart(f)(i)]|,
depending on whether or not |skip_byte(i)<=stop_flag|.

The constant |kern_base_offset| should be simplified, for \PASCAL\ compilers
that do not do local optimization.
@^system dependencies@>

@d char_kern_end(#)==256*op_byte(#)+rem_byte(#)].sc
@d char_kern(#)==font_info[kern_base[#]+char_kern_end
@d kern_base_offset==256*(128+min_quarterword)
@d lig_kern_start(#)==lig_kern_base[#]+rem_byte {beginning of lig/kern program}
@d lig_kern_restart_end(#)==256*op_byte(#)+rem_byte(#)+32768-kern_base_offset
@d lig_kern_restart(#)==lig_kern_base[#]+lig_kern_restart_end

@ Font parameters are referred to as |slant(f)|, |space(f)|, etc.

@d param_end(#)==param_base[#]].sc
@d param(#)==font_info[#+param_end
@d slant==param(slant_code) {slant to the right, per unit distance upward}
@d space==param(space_code) {normal space between words}
@d space_stretch==param(space_stretch_code) {stretch between words}
@d space_shrink==param(space_shrink_code) {shrink between words}
@d x_height==param(x_height_code) {one ex}
@d quad==param(quad_code) {one em}
@d extra_space==param(extra_space_code) {additional space at end of sentence}

@<The em width for |cur_font|@>=quad(cur_font)

@ @<The x-height for |cur_font|@>=x_height(cur_font)

@ \TeX\ checks the information of a \.{TFM} file for validity as the
file is being read in, so that no further checks will be needed when
typesetting is going on. The somewhat tedious subroutine that does this
is called |read_font_info|. It has four parameters: the user font
identifier~|u|, the file name and area strings |nom| and |aire|, and the
``at'' size~|s|. If |s|~is negative, it's the negative of a scale factor
to be applied to the design size; |s=-1000| is the normal case.
Otherwise |s| will be substituted for the design size; in this
case, |s| must be positive and less than $2048\rm\,pt$
(i.e., it must be less than $2^{27}$ when considered as an integer).

The subroutine opens and closes a global file variable called |tfm_file|.
It returns the value of the internal font number that was just loaded.
If an error is detected, an error message is issued and no font
information is stored; |null_font| is returned in this case.

@d bad_tfm=11 {label for |read_font_info|}
@d abort==goto bad_tfm {do this when the \.{TFM} data is wrong}

@p function read_font_info(@!u:pointer;@!nom,@!aire:str_number;
  @!s:scaled):internal_font_number; {input a \.{TFM} file}
label done,bad_tfm,not_found;
var k:font_index; {index into |font_info|}
@!file_opened:boolean; {was |tfm_file| successfully opened?}
@!lf,@!lh,@!bc,@!ec,@!nw,@!nh,@!nd,@!ni,@!nl,@!nk,@!ne,@!np:halfword;
  {sizes of subfiles}
@!f:internal_font_number; {the new font's number}
@!g:internal_font_number; {the number to return}
@!a,@!b,@!c,@!d:eight_bits; {byte variables}
@!qw:four_quarters;@!sw:scaled; {accumulators}
@!bch_label:integer; {left boundary start location, or infinity}
@!bchar:0..256; {right boundary character, or 256}
@!z:scaled; {the design size or the ``at'' size}
@!alpha:integer;@!beta:1..16;
  {auxiliary quantities used in fixed-point multiplication}
begin g:=null_font;@/
@<Read and check the font data; |abort| if the \.{TFM} file is
  malformed; if there's no room for this font, say so and |goto
  done|; otherwise |incr(font_ptr)| and |goto done|@>;
bad_tfm: @<Report that the font won't be loaded@>;
done: if file_opened then b_close(tfm_file);
read_font_info:=g;
end;

@ There are programs called \.{TFtoPL} and \.{PLtoTF} that convert
between the \.{TFM} format and a symbolic property-list format
that can be easily edited. These programs contain extensive
diagnostic information, so \TeX\ does not have to bother giving
precise details about why it rejects a particular \.{TFM} file.
@.TFtoPL@> @.PLtoTF@>

@d start_font_error_message==print_err("Font "); sprint_cs(u);
  print_char("="); print_file_name(nom,aire,"");
  if s>=0 then
    begin print(" at "); print_scaled(s); print("pt");
    end
  else if s<>-1000 then
    begin print(" scaled "); print_int(-s);
    end

@<Report that the font won't be loaded@>=
start_font_error_message;
@.Font x=xx not loadable...@>
if file_opened then print(" not loadable: Bad metric (TFM) file")
else print(" not loadable: Metric (TFM) file not found");
help5("I wasn't able to read the size data for this font,")@/
("so I will ignore the font specification.")@/
("[Wizards can fix TFM files using TFtoPL/PLtoTF.]")@/
("You might try inserting a different font spec;")@/
("e.g., type `I\font<same font id>=<substitute font name>'.");
error

@ @<Read and check...@>=
@<Open |tfm_file| for input@>;
@<Read the {\.{TFM}} size fields@>;
@<Use size fields to allocate font information@>;
@<Read the {\.{TFM}} header@>;
@<Read character data@>;
@<Read box dimensions@>;
@<Read ligature/kern program@>;
@<Read extensible character recipes@>;
@<Read font parameters@>;
@<Make final adjustments and |goto done|@>

@ @<Open |tfm_file| for input@>=
file_opened:=false;
if aire="" then pack_file_name(nom,TEX_font_area,".tfm")
else pack_file_name(nom,aire,".tfm");
if not b_open_in(tfm_file) then abort;
file_opened:=true

@ Note: A malformed \.{TFM} file might be shorter than it claims to be;
thus |eof(tfm_file)| might be true when |read_font_info| refers to
|tfm_file^| or when it says |get(tfm_file)|. If such circumstances
cause system error messages, you will have to defeat them somehow,
for example by defining |fget| to be `\ignorespaces|begin get(tfm_file);|
|if eof(tfm_file) then abort; end|\unskip'.
@^system dependencies@>

@d fget==get(tfm_file)
@d fbyte==tfm_file^
@d read_sixteen(#)==begin #:=fbyte;
  if #>127 then abort;
  fget; #:=#*@'400+fbyte;
  end
@d store_four_quarters(#)==begin fget; a:=fbyte; qw.b0:=qi(a);
  fget; b:=fbyte; qw.b1:=qi(b);
  fget; c:=fbyte; qw.b2:=qi(c);
  fget; d:=fbyte; qw.b3:=qi(d);
  #:=qw;
  end

@ @<Read the {\.{TFM}} size fields@>=
begin read_sixteen(lf);
fget; read_sixteen(lh);
fget; read_sixteen(bc);
fget; read_sixteen(ec);
if (bc>ec+1)or(ec>255) then abort;
if bc>255 then {|bc=256| and |ec=255|}
  begin bc:=1; ec:=0;
  end;
fget; read_sixteen(nw);
fget; read_sixteen(nh);
fget; read_sixteen(nd);
fget; read_sixteen(ni);
fget; read_sixteen(nl);
fget; read_sixteen(nk);
fget; read_sixteen(ne);
fget; read_sixteen(np);
if lf<>6+lh+(ec-bc+1)+nw+nh+nd+ni+nl+nk+ne+np then abort;
end

@ The preliminary settings of the index-offset variables |char_base|,
|width_base|, |lig_kern_base|, |kern_base|, and |exten_base| will be
corrected later by subtracting |min_quarterword| from them; and we will
subtract 1 from |param_base| too. It's best to forget about such anomalies
until later.

@<Use size fields to allocate font information@>=
lf:=lf-6-lh; {|lf| words should be loaded into |font_info|}
if np<7 then lf:=lf+7-np; {at least seven parameters will appear}
if (font_ptr=font_max)or(fmem_ptr+lf>font_mem_size) then
  @<Apologize for not loading the font, |goto done|@>;
f:=font_ptr+1;
char_base[f]:=fmem_ptr-bc;
width_base[f]:=char_base[f]+ec+1;
height_base[f]:=width_base[f]+nw;
depth_base[f]:=height_base[f]+nh;
italic_base[f]:=depth_base[f]+nd;
lig_kern_base[f]:=italic_base[f]+ni;
kern_base[f]:=lig_kern_base[f]+nl-kern_base_offset;
exten_base[f]:=kern_base[f]+kern_base_offset+nk;
param_base[f]:=exten_base[f]+ne

@ @<Apologize for not loading...@>=
begin start_font_error_message;
print(" not loaded: Not enough room left");
@.Font x=xx not loaded...@>
help4("I'm afraid I won't be able to make use of this font,")@/
("because my memory for character-size data is too small.")@/
("If you're really stuck, ask a wizard to enlarge me.")@/
("Or maybe try `I\font<same font id>=<name of loaded font>'.");
error; goto done;
end

@ Only the first two words of the header are needed by \TeX82.

@<Read the {\.{TFM}} header@>=
begin if lh<2 then abort;
store_four_quarters(font_check[f]);
fget; read_sixteen(z); {this rejects a negative design size}
fget; z:=z*@'400+fbyte; fget; z:=(z*@'20)+(fbyte div@'20);
if z<unity then abort;
while lh>2 do
  begin fget;fget;fget;fget;decr(lh); {ignore the rest of the header}
  end;
font_dsize[f]:=z;
if s<>-1000 then
  if s>=0 then z:=s
  else z:=xn_over_d(z,-s,1000);
font_size[f]:=z;
end

@ @<Read character data@>=
for k:=fmem_ptr to width_base[f]-1 do
  begin store_four_quarters(font_info[k].qqqq);
  if (a>=nw)or(b div @'20>=nh)or(b mod @'20>=nd)or
    (c div 4>=ni) then abort;
  case c mod 4 of
  lig_tag: if d>=nl then abort;
  ext_tag: if d>=ne then abort;
  list_tag: @<Check for charlist cycle@>;
  othercases do_nothing {|no_tag|}
  endcases;
  end

@ We want to make sure that there is no cycle of characters linked together
by |list_tag| entries, since such a cycle would get \TeX\ into an endless
loop. If such a cycle exists, the routine here detects it when processing
the largest character code in the cycle.

@d check_byte_range(#)==begin if (#<bc)or(#>ec) then abort@+end
@d current_character_being_worked_on==k+bc-fmem_ptr

@<Check for charlist cycle@>=
begin check_byte_range(d);
while d<current_character_being_worked_on do
  begin qw:=char_info(f)(d);
  {N.B.: not |qi(d)|, since |char_base[f]| hasn't been adjusted yet}
  if char_tag(qw)<>list_tag then goto not_found;
  d:=qo(rem_byte(qw)); {next character on the list}
  end;
if d=current_character_being_worked_on then abort; {yes, there's a cycle}
not_found:end

@ A |fix_word| whose four bytes are $(a,b,c,d)$ from left to right represents
the number
$$x=\left\{\vcenter{\halign{$#$,\hfil\qquad&if $#$\hfil\cr
b\cdot2^{-4}+c\cdot2^{-12}+d\cdot2^{-20}&a=0;\cr
-16+b\cdot2^{-4}+c\cdot2^{-12}+d\cdot2^{-20}&a=255.\cr}}\right.$$
(No other choices of |a| are allowed, since the magnitude of a number in
design-size units must be less than 16.)  We want to multiply this
quantity by the integer~|z|, which is known to be less than $2^{27}$.
If $|z|<2^{23}$, the individual multiplications $b\cdot z$,
$c\cdot z$, $d\cdot z$ cannot overflow; otherwise we will divide |z| by 2,
4, 8, or 16, to obtain a multiplier less than $2^{23}$, and we can
compensate for this later. If |z| has thereby been replaced by
$|z|^\prime=|z|/2^e$, let $\beta=2^{4-e}$; we shall compute
$$\lfloor(b+c\cdot2^{-8}+d\cdot2^{-16})\,z^\prime/\beta\rfloor$$
if $a=0$, or the same quantity minus $\alpha=2^{4+e}z^\prime$ if $a=255$.
This calculation must be done exactly, in order to guarantee portability
of \TeX\ between computers.

@d store_scaled(#)==begin fget; a:=fbyte; fget; b:=fbyte;
  fget; c:=fbyte; fget; d:=fbyte;@/
  sw:=(((((d*z)div@'400)+(c*z))div@'400)+(b*z))div beta;
  if a=0 then #:=sw@+else if a=255 then #:=sw-alpha@+else abort;
  end

@<Read box dimensions@>=
begin @<Replace |z| by $|z|^\prime$ and compute $\alpha,\beta$@>;
for k:=width_base[f] to lig_kern_base[f]-1 do
  store_scaled(font_info[k].sc);
if font_info[width_base[f]].sc<>0 then abort; {\\{width}[0] must be zero}
if font_info[height_base[f]].sc<>0 then abort; {\\{height}[0] must be zero}
if font_info[depth_base[f]].sc<>0 then abort; {\\{depth}[0] must be zero}
if font_info[italic_base[f]].sc<>0 then abort; {\\{italic}[0] must be zero}
end

@ @<Replace |z|...@>=
begin alpha:=16;
while z>=@'40000000 do
  begin z:=z div 2; alpha:=alpha+alpha;
  end;
beta:=256 div alpha; alpha:=alpha*z;
end

@ @d check_existence(#)==@t@>@;@/
  begin check_byte_range(#);
  qw:=char_info(f)(#); {N.B.: not |qi(#)|}
  if not char_exists(qw) then abort;
  end

@<Read ligature/kern program@>=
bch_label:=@'77777; bchar:=256;
if nl>0 then
  begin for k:=lig_kern_base[f] to kern_base[f]+kern_base_offset-1 do
    begin store_four_quarters(font_info[k].qqqq);
    if a>128 then
      begin if 256*c+d>=nl then abort;
      if a=255 then if k=lig_kern_base[f] then bchar:=b;
      end
    else begin if b<>bchar then check_existence(b);
      if c<128 then check_existence(d) {check ligature}
      else if 256*(c-128)+d>=nk then abort; {check kern}
      if a<128 then if k-lig_kern_base[f]+a+1>=nl then abort;
      end;
    end;
  if a=255 then bch_label:=256*c+d;
  end;
for k:=kern_base[f]+kern_base_offset to exten_base[f]-1 do
  store_scaled(font_info[k].sc);

@ @<Read extensible character recipes@>=
for k:=exten_base[f] to param_base[f]-1 do
  begin store_four_quarters(font_info[k].qqqq);
  if a<>0 then check_existence(a);
  if b<>0 then check_existence(b);
  if c<>0 then check_existence(c);
  check_existence(d);
  end

@ We check to see that the \.{TFM} file doesn't end prematurely; but
no error message is given for files having more than |lf| words.

@<Read font parameters@>=
begin for k:=1 to np do
  if k=1 then {the |slant| parameter is a pure number}
    begin fget; sw:=fbyte; if sw>127 then sw:=sw-256;
    fget; sw:=sw*@'400+fbyte; fget; sw:=sw*@'400+fbyte;
    fget; font_info[param_base[f]].sc:=
      (sw*@'20)+(fbyte div@'20);
    end
  else store_scaled(font_info[param_base[f]+k-1].sc);
if eof(tfm_file) then abort;
for k:=np+1 to 7 do font_info[param_base[f]+k-1].sc:=0;
end

@ Now to wrap it up, we have checked all the necessary things about the \.{TFM}
file, and all we need to do is put the finishing touches on the data for
the new font.

@d adjust(#)==#[f]:=qo(#[f])
  {correct for the excess |min_quarterword| that was added}

@<Make final adjustments...@>=
if np>=7 then font_params[f]:=np@+else font_params[f]:=7;
hyphen_char[f]:=default_hyphen_char; skew_char[f]:=default_skew_char;
if bch_label<nl then bchar_label[f]:=bch_label+lig_kern_base[f]
else bchar_label[f]:=non_address;
font_bchar[f]:=qi(bchar);
font_false_bchar[f]:=qi(bchar);
if bchar<=ec then if bchar>=bc then
  begin qw:=char_info(f)(bchar); {N.B.: not |qi(bchar)|}
  if char_exists(qw) then font_false_bchar[f]:=non_char;
  end;
font_name[f]:=nom;
font_area[f]:=aire;
font_bc[f]:=bc; font_ec[f]:=ec; font_glue[f]:=null;
adjust(char_base); adjust(width_base); adjust(lig_kern_base);
adjust(kern_base); adjust(exten_base);
decr(param_base[f]);
fmem_ptr:=fmem_ptr+lf; font_ptr:=f; g:=f; goto done

@ Before we forget about the format of these tables, let's deal with two
of \TeX's basic scanning routines related to font information.

@<Declare procedures that scan font-related stuff@>=
procedure scan_font_ident;
var f:internal_font_number;
@!m:halfword;
begin @<Get the next non-blank non-call...@>;
if cur_cmd=def_font then f:=cur_font
else if cur_cmd=set_font then f:=cur_chr
else if cur_cmd=def_family then
  begin m:=cur_chr; scan_four_bit_int; f:=equiv(m+cur_val);
  end
else  begin print_err("Missing font identifier");
@.Missing font identifier@>
  help2("I was looking for a control sequence whose")@/
  ("current meaning has been defined by \font.");
  back_error; f:=null_font;
  end;
cur_val:=f;
end;

@ The following routine is used to implement `\.{\\fontdimen} |n| |f|'.
The boolean parameter |writing| is set |true| if the calling program
intends to change the parameter value.

@<Declare procedures that scan font-related stuff@>=
procedure find_font_dimen(@!writing:boolean);
  {sets |cur_val| to |font_info| location}
var f:internal_font_number;
@!n:integer; {the parameter number}
begin scan_int; n:=cur_val; scan_font_ident; f:=cur_val;
if n<=0 then cur_val:=fmem_ptr
else  begin if writing and(n<=space_shrink_code)and@|
    (n>=space_code)and(font_glue[f]<>null) then
    begin delete_glue_ref(font_glue[f]);
    font_glue[f]:=null;
    end;
  if n>font_params[f] then
    if f<font_ptr then cur_val:=fmem_ptr
    else @<Increase the number of parameters in the last font@>
  else cur_val:=n+param_base[f];
  end;
@<Issue an error message if |cur_val=fmem_ptr|@>;
end;

@ @<Issue an error message if |cur_val=fmem_ptr|@>=
if cur_val=fmem_ptr then
  begin print_err("Font "); print_esc(font_id_text(f));
  print(" has only "); print_int(font_params[f]);
  print(" fontdimen parameters");
@.Font x has only...@>
  help2("To increase the number of font parameters, you must")@/
    ("use \fontdimen immediately after the \font is loaded.");
  error;
  end

@ @<Increase the number of parameters...@>=
begin repeat if fmem_ptr=font_mem_size then
  overflow("font memory",font_mem_size);
@:TeX capacity exceeded font memory}{\quad font memory@>
font_info[fmem_ptr].sc:=0; incr(fmem_ptr); incr(font_params[f]);
until n=font_params[f];
cur_val:=fmem_ptr-1; {this equals |param_base[f]+font_params[f]|}
end

@ When \TeX\ wants to typeset a character that doesn't exist, the
character node is not created; thus the output routine can assume
that characters exist when it sees them. The following procedure
prints a warning message unless the user has suppressed it.

@p procedure char_warning(@!f:internal_font_number;@!c:eight_bits);
begin if tracing_lost_chars>0 then
  begin begin_diagnostic;
  print_nl("Missing character: There is no ");
@.Missing character@>
  print_ASCII(c); print(" in font ");
  slow_print(font_name[f]); print_char("!"); end_diagnostic(false);
  end;
end;

@ Here is a function that returns a pointer to a character node for a
given character in a given font. If that character doesn't exist,
|null| is returned instead.

@p function new_character(@!f:internal_font_number;@!c:eight_bits):pointer;
label exit;
var p:pointer; {newly allocated node}
begin if font_bc[f]<=c then if font_ec[f]>=c then
  if char_exists(char_info(f)(qi(c))) then
    begin p:=get_avail; font(p):=f; character(p):=qi(c);
    new_character:=p; return;
    end;
char_warning(f,c);
new_character:=null;
exit:end;

@* \[31] Device-independent file format.
The most important output produced by a run of \TeX\ is the ``device
independent'' (\.{DVI}) file that specifies where characters and rules
are to appear on printed pages. The form of these files was designed by
David R. Fuchs in 1979. Almost any reasonable typesetting device can be
@^Fuchs, David Raymond@>
@:DVI_files}{\.{DVI} files@>
driven by a program that takes \.{DVI} files as input, and dozens of such
\.{DVI}-to-whatever programs have been written. Thus, it is possible to
print the output of \TeX\ on many different kinds of equipment, using \TeX\
as a device-independent ``front end.''

A \.{DVI} file is a stream of 8-bit bytes, which may be regarded as a
series of commands in a machine-like language. The first byte of each command
is the operation code, and this code is followed by zero or more bytes
that provide parameters to the command. The parameters themselves may consist
of several consecutive bytes; for example, the `|set_rule|' command has two
parameters, each of which is four bytes long. Parameters are usually
regarded as nonnegative integers; but four-byte-long parameters,
and shorter parameters that denote distances, can be
either positive or negative. Such parameters are given in two's complement
notation. For example, a two-byte-long distance parameter has a value between
$-2^{15}$ and $2^{15}-1$. As in \.{TFM} files, numbers that occupy
more than one byte position appear in BigEndian order.

A \.{DVI} file consists of a ``preamble,'' followed by a sequence of one
or more ``pages,'' followed by a ``postamble.'' The preamble is simply a
|pre| command, with its parameters that define the dimensions used in the
file; this must come first.  Each ``page'' consists of a |bop| command,
followed by any number of other commands that tell where characters are to
be placed on a physical page, followed by an |eop| command. The pages
appear in the order that \TeX\ generated them. If we ignore |nop| commands
and \\{fnt\_def} commands (which are allowed between any two commands in
the file), each |eop| command is immediately followed by a |bop| command,
or by a |post| command; in the latter case, there are no more pages in the
file, and the remaining bytes form the postamble.  Further details about
the postamble will be explained later.

Some parameters in \.{DVI} commands are ``pointers.'' These are four-byte
quantities that give the location number of some other byte in the file;
the first byte is number~0, then comes number~1, and so on. For example,
one of the parameters of a |bop| command points to the previous |bop|;
this makes it feasible to read the pages in backwards order, in case the
results are being directed to a device that stacks its output face up.
Suppose the preamble of a \.{DVI} file occupies bytes 0 to 99. Now if the
first page occupies bytes 100 to 999, say, and if the second
page occupies bytes 1000 to 1999, then the |bop| that starts in byte 1000
points to 100 and the |bop| that starts in byte 2000 points to 1000. (The
very first |bop|, i.e., the one starting in byte 100, has a pointer of~$-1$.)

@ The \.{DVI} format is intended to be both compact and easily interpreted
by a machine. Compactness is achieved by making most of the information
implicit instead of explicit. When a \.{DVI}-reading program reads the
commands for a page, it keeps track of several quantities: (a)~The current
font |f| is an integer; this value is changed only
by \\{fnt} and \\{fnt\_num} commands. (b)~The current position on the page
is given by two numbers called the horizontal and vertical coordinates,
|h| and |v|. Both coordinates are zero at the upper left corner of the page;
moving to the right corresponds to increasing the horizontal coordinate, and
moving down corresponds to increasing the vertical coordinate. Thus, the
coordinates are essentially Cartesian, except that vertical directions are
flipped; the Cartesian version of |(h,v)| would be |(h,-v)|.  (c)~The
current spacing amounts are given by four numbers |w|, |x|, |y|, and |z|,
where |w| and~|x| are used for horizontal spacing and where |y| and~|z|
are used for vertical spacing. (d)~There is a stack containing
|(h,v,w,x,y,z)| values; the \.{DVI} commands |push| and |pop| are used to
change the current level of operation. Note that the current font~|f| is
not pushed and popped; the stack contains only information about
positioning.

The values of |h|, |v|, |w|, |x|, |y|, and |z| are signed integers having up
to 32 bits, including the sign. Since they represent physical distances,
there is a small unit of measurement such that increasing |h| by~1 means
moving a certain tiny distance to the right. The actual unit of
measurement is variable, as explained below; \TeX\ sets things up so that
its \.{DVI} output is in sp units, i.e., scaled points, in agreement with
all the |scaled| dimensions in \TeX's data structures.

@ Here is a list of all the commands that may appear in a \.{DVI} file. Each
command is specified by its symbolic name (e.g., |bop|), its opcode byte
(e.g., 139), and its parameters (if any). The parameters are followed
by a bracketed number telling how many bytes they occupy; for example,
`|p[4]|' means that parameter |p| is four bytes long.

\yskip\hang|set_char_0| 0. Typeset character number~0 from font~|f|
such that the reference point of the character is at |(h,v)|. Then
increase |h| by the width of that character. Note that a character may
have zero or negative width, so one cannot be sure that |h| will advance
after this command; but |h| usually does increase.

\yskip\hang\\{set\_char\_1} through \\{set\_char\_127} (opcodes 1 to 127).
Do the operations of |set_char_0|; but use the character whose number
matches the opcode, instead of character~0.

\yskip\hang|set1| 128 |c[1]|. Same as |set_char_0|, except that character
number~|c| is typeset. \TeX82 uses this command for characters in the
range |128<=c<256|.

\yskip\hang|@!set2| 129 |c[2]|. Same as |set1|, except that |c|~is two
bytes long, so it is in the range |0<=c<65536|. \TeX82 never uses this
command, but it should come in handy for extensions of \TeX\ that deal
with oriental languages.
@^oriental characters@>@^Chinese characters@>@^Japanese characters@>

\yskip\hang|@!set3| 130 |c[3]|. Same as |set1|, except that |c|~is three
bytes long, so it can be as large as $2^{24}-1$. Not even the Chinese
language has this many characters, but this command might prove useful
in some yet unforeseen extension.

\yskip\hang|@!set4| 131 |c[4]|. Same as |set1|, except that |c|~is four
bytes long. Imagine that.

\yskip\hang|set_rule| 132 |a[4]| |b[4]|. Typeset a solid black rectangle
of height~|a| and width~|b|, with its bottom left corner at |(h,v)|. Then
set |h:=h+b|. If either |a<=0| or |b<=0|, nothing should be typeset. Note
that if |b<0|, the value of |h| will decrease even though nothing else happens.
See below for details about how to typeset rules so that consistency with
\MF\ is guaranteed.

\yskip\hang|@!put1| 133 |c[1]|. Typeset character number~|c| from font~|f|
such that the reference point of the character is at |(h,v)|. (The `put'
commands are exactly like the `set' commands, except that they simply put out a
character or a rule without moving the reference point afterwards.)

\yskip\hang|@!put2| 134 |c[2]|. Same as |set2|, except that |h| is not changed.

\yskip\hang|@!put3| 135 |c[3]|. Same as |set3|, except that |h| is not changed.

\yskip\hang|@!put4| 136 |c[4]|. Same as |set4|, except that |h| is not changed.

\yskip\hang|put_rule| 137 |a[4]| |b[4]|. Same as |set_rule|, except that
|h| is not changed.

\yskip\hang|nop| 138. No operation, do nothing. Any number of |nop|'s
may occur between \.{DVI} commands, but a |nop| cannot be inserted between
a command and its parameters or between two parameters.

\yskip\hang|bop| 139 $c_0[4]$ $c_1[4]$ $\ldots$ $c_9[4]$ $p[4]$. Beginning
of a page: Set |(h,v,w,x,y,z):=(0,0,0,0,0,0)| and set the stack empty. Set
the current font |f| to an undefined value.  The ten $c_i$ parameters hold
the values of \.{\\count0} $\ldots$ \.{\\count9} in \TeX\ at the time
\.{\\shipout} was invoked for this page; they can be used to identify
pages, if a user wants to print only part of a \.{DVI} file. The parameter
|p| points to the previous |bop| in the file; the first
|bop| has $p=-1$.

\yskip\hang|eop| 140.  End of page: Print what you have read since the
previous |bop|. At this point the stack should be empty. (The \.{DVI}-reading
programs that drive most output devices will have kept a buffer of the
material that appears on the page that has just ended. This material is
largely, but not entirely, in order by |v| coordinate and (for fixed |v|) by
|h|~coordinate; so it usually needs to be sorted into some order that is
appropriate for the device in question.)

\yskip\hang|push| 141. Push the current values of |(h,v,w,x,y,z)| onto the
top of the stack; do not change any of these values. Note that |f| is
not pushed.

\yskip\hang|pop| 142. Pop the top six values off of the stack and assign
them respectively to |(h,v,w,x,y,z)|. The number of pops should never
exceed the number of pushes, since it would be highly embarrassing if the
stack were empty at the time of a |pop| command.

\yskip\hang|right1| 143 |b[1]|. Set |h:=h+b|, i.e., move right |b| units.
The parameter is a signed number in two's complement notation, |-128<=b<128|;
if |b<0|, the reference point moves left.

\yskip\hang|right2| 144 |b[2]|. Same as |right1|, except that |b| is a
two-byte quantity in the range |-32768<=b<32768|.

\yskip\hang|right3| 145 |b[3]|. Same as |right1|, except that |b| is a
three-byte quantity in the range |@t$-2^{23}$@><=b<@t$2^{23}$@>|.

\yskip\hang|right4| 146 |b[4]|. Same as |right1|, except that |b| is a
four-byte quantity in the range |@t$-2^{31}$@><=b<@t$2^{31}$@>|.

\yskip\hang|w0| 147. Set |h:=h+w|; i.e., move right |w| units. With luck,
this parameterless command will usually suffice, because the same kind of motion
will occur several times in succession; the following commands explain how
|w| gets particular values.

\yskip\hang|w1| 148 |b[1]|. Set |w:=b| and |h:=h+b|. The value of |b| is a
signed quantity in two's complement notation, |-128<=b<128|. This command
changes the current |w|~spacing and moves right by |b|.

\yskip\hang|@!w2| 149 |b[2]|. Same as |w1|, but |b| is two bytes long,
|-32768<=b<32768|.

\yskip\hang|@!w3| 150 |b[3]|. Same as |w1|, but |b| is three bytes long,
|@t$-2^{23}$@><=b<@t$2^{23}$@>|.

\yskip\hang|@!w4| 151 |b[4]|. Same as |w1|, but |b| is four bytes long,
|@t$-2^{31}$@><=b<@t$2^{31}$@>|.

\yskip\hang|x0| 152. Set |h:=h+x|; i.e., move right |x| units. The `|x|'
commands are like the `|w|' commands except that they involve |x| instead
of |w|.

\yskip\hang|x1| 153 |b[1]|. Set |x:=b| and |h:=h+b|. The value of |b| is a
signed quantity in two's complement notation, |-128<=b<128|. This command
changes the current |x|~spacing and moves right by |b|.

\yskip\hang|@!x2| 154 |b[2]|. Same as |x1|, but |b| is two bytes long,
|-32768<=b<32768|.

\yskip\hang|@!x3| 155 |b[3]|. Same as |x1|, but |b| is three bytes long,
|@t$-2^{23}$@><=b<@t$2^{23}$@>|.

\yskip\hang|@!x4| 156 |b[4]|. Same as |x1|, but |b| is four bytes long,
|@t$-2^{31}$@><=b<@t$2^{31}$@>|.

\yskip\hang|down1| 157 |a[1]|. Set |v:=v+a|, i.e., move down |a| units.
The parameter is a signed number in two's complement notation, |-128<=a<128|;
if |a<0|, the reference point moves up.

\yskip\hang|@!down2| 158 |a[2]|. Same as |down1|, except that |a| is a
two-byte quantity in the range |-32768<=a<32768|.

\yskip\hang|@!down3| 159 |a[3]|. Same as |down1|, except that |a| is a
three-byte quantity in the range |@t$-2^{23}$@><=a<@t$2^{23}$@>|.

\yskip\hang|@!down4| 160 |a[4]|. Same as |down1|, except that |a| is a
four-byte quantity in the range |@t$-2^{31}$@><=a<@t$2^{31}$@>|.

\yskip\hang|y0| 161. Set |v:=v+y|; i.e., move down |y| units. With luck,
this parameterless command will usually suffice, because the same kind of motion
will occur several times in succession; the following commands explain how
|y| gets particular values.

\yskip\hang|y1| 162 |a[1]|. Set |y:=a| and |v:=v+a|. The value of |a| is a
signed quantity in two's complement notation, |-128<=a<128|. This command
changes the current |y|~spacing and moves down by |a|.

\yskip\hang|@!y2| 163 |a[2]|. Same as |y1|, but |a| is two bytes long,
|-32768<=a<32768|.

\yskip\hang|@!y3| 164 |a[3]|. Same as |y1|, but |a| is three bytes long,
|@t$-2^{23}$@><=a<@t$2^{23}$@>|.

\yskip\hang|@!y4| 165 |a[4]|. Same as |y1|, but |a| is four bytes long,
|@t$-2^{31}$@><=a<@t$2^{31}$@>|.

\yskip\hang|z0| 166. Set |v:=v+z|; i.e., move down |z| units. The `|z|' commands
are like the `|y|' commands except that they involve |z| instead of |y|.

\yskip\hang|z1| 167 |a[1]|. Set |z:=a| and |v:=v+a|. The value of |a| is a
signed quantity in two's complement notation, |-128<=a<128|. This command
changes the current |z|~spacing and moves down by |a|.

\yskip\hang|@!z2| 168 |a[2]|. Same as |z1|, but |a| is two bytes long,
|-32768<=a<32768|.

\yskip\hang|@!z3| 169 |a[3]|. Same as |z1|, but |a| is three bytes long,
|@t$-2^{23}$@><=a<@t$2^{23}$@>|.

\yskip\hang|@!z4| 170 |a[4]|. Same as |z1|, but |a| is four bytes long,
|@t$-2^{31}$@><=a<@t$2^{31}$@>|.

\yskip\hang|fnt_num_0| 171. Set |f:=0|. Font 0 must previously have been
defined by a \\{fnt\_def} instruction, as explained below.

\yskip\hang\\{fnt\_num\_1} through \\{fnt\_num\_63} (opcodes 172 to 234). Set
|f:=1|, \dots, \hbox{|f:=63|}, respectively.

\yskip\hang|fnt1| 235 |k[1]|. Set |f:=k|. \TeX82 uses this command for font
numbers in the range |64<=k<256|.

\yskip\hang|@!fnt2| 236 |k[2]|. Same as |fnt1|, except that |k|~is two
bytes long, so it is in the range |0<=k<65536|. \TeX82 never generates this
command, but large font numbers may prove useful for specifications of
color or texture, or they may be used for special fonts that have fixed
numbers in some external coding scheme.

\yskip\hang|@!fnt3| 237 |k[3]|. Same as |fnt1|, except that |k|~is three
bytes long, so it can be as large as $2^{24}-1$.

\yskip\hang|@!fnt4| 238 |k[4]|. Same as |fnt1|, except that |k|~is four
bytes long; this is for the really big font numbers (and for the negative ones).

\yskip\hang|xxx1| 239 |k[1]| |x[k]|. This command is undefined in
general; it functions as a $(k+2)$-byte |nop| unless special \.{DVI}-reading
programs are being used. \TeX82 generates |xxx1| when a short enough
\.{\\special} appears, setting |k| to the number of bytes being sent. It
is recommended that |x| be a string having the form of a keyword followed
by possible parameters relevant to that keyword.

\yskip\hang|@!xxx2| 240 |k[2]| |x[k]|. Like |xxx1|, but |0<=k<65536|.

\yskip\hang|@!xxx3| 241 |k[3]| |x[k]|. Like |xxx1|, but |0<=k<@t$2^{24}$@>|.

\yskip\hang|xxx4| 242 |k[4]| |x[k]|. Like |xxx1|, but |k| can be ridiculously
large. \TeX82 uses |xxx4| when sending a string of length 256 or more.

\yskip\hang|fnt_def1| 243 |k[1]| |c[4]| |s[4]| |d[4]| |a[1]| |l[1]| |n[a+l]|.
Define font |k|, where |0<=k<256|; font definitions will be explained shortly.

\yskip\hang|@!fnt_def2| 244 |k[2]| |c[4]| |s[4]| |d[4]| |a[1]| |l[1]| |n[a+l]|.
Define font |k|, where |0<=k<65536|.

\yskip\hang|@!fnt_def3| 245 |k[3]| |c[4]| |s[4]| |d[4]| |a[1]| |l[1]| |n[a+l]|.
Define font |k|, where |0<=k<@t$2^{24}$@>|.

\yskip\hang|@!fnt_def4| 246 |k[4]| |c[4]| |s[4]| |d[4]| |a[1]| |l[1]| |n[a+l]|.
Define font |k|, where |@t$-2^{31}$@><=k<@t$2^{31}$@>|.

\yskip\hang|pre| 247 |i[1]| |num[4]| |den[4]| |mag[4]| |k[1]| |x[k]|.
Beginning of the preamble; this must come at the very beginning of the
file. Parameters |i|, |num|, |den|, |mag|, |k|, and |x| are explained below.

\yskip\hang|post| 248. Beginning of the postamble, see below.

\yskip\hang|post_post| 249. Ending of the postamble, see below.

\yskip\noindent Commands 250--255 are undefined at the present time.

@ @d set_char_0=0 {typeset character 0 and move right}
@d set1=128 {typeset a character and move right}
@d set_rule=132 {typeset a rule and move right}
@d put_rule=137 {typeset a rule}
@d nop=138 {no operation}
@d bop=139 {beginning of page}
@d eop=140 {ending of page}
@d push=141 {save the current positions}
@d pop=142 {restore previous positions}
@d right1=143 {move right}
@d w0=147 {move right by |w|}
@d w1=148 {move right and set |w|}
@d x0=152 {move right by |x|}
@d x1=153 {move right and set |x|}
@d down1=157 {move down}
@d y0=161 {move down by |y|}
@d y1=162 {move down and set |y|}
@d z0=166 {move down by |z|}
@d z1=167 {move down and set |z|}
@d fnt_num_0=171 {set current font to 0}
@d fnt1=235 {set current font}
@d xxx1=239 {extension to \.{DVI} primitives}
@d xxx4=242 {potentially long extension to \.{DVI} primitives}
@d fnt_def1=243 {define the meaning of a font number}
@d pre=247 {preamble}
@d post=248 {postamble beginning}
@d post_post=249 {postamble ending}

@ The preamble contains basic information about the file as a whole. As
stated above, there are six parameters:
$$\hbox{|@!i[1]| |@!num[4]| |@!den[4]| |@!mag[4]| |@!k[1]| |@!x[k]|.}$$
The |i| byte identifies \.{DVI} format; currently this byte is always set
to~2. (The value |i=3| is currently used for an extended format that
allows a mixture of right-to-left and left-to-right typesetting.
Some day we will set |i=4|, when \.{DVI} format makes another
incompatible change---perhaps in the year 2048.)

The next two parameters, |num| and |den|, are positive integers that define
the units of measurement; they are the numerator and denominator of a
fraction by which all dimensions in the \.{DVI} file could be multiplied
in order to get lengths in units of $10^{-7}$ meters. Since $\rm 7227{pt} =
254{cm}$, and since \TeX\ works with scaled points where there are $2^{16}$
sp in a point, \TeX\ sets
$|num|/|den|=(254\cdot10^5)/(7227\cdot2^{16})=25400000/473628672$.
@^sp@>

The |mag| parameter is what \TeX\ calls \.{\\mag}, i.e., 1000 times the
desired magnification. The actual fraction by which dimensions are
multiplied is therefore $|mag|\cdot|num|/1000|den|$. Note that if a \TeX\
source document does not call for any `\.{true}' dimensions, and if you
change it only by specifying a different \.{\\mag} setting, the \.{DVI}
file that \TeX\ creates will be completely unchanged except for the value
of |mag| in the preamble and postamble. (Fancy \.{DVI}-reading programs allow
users to override the |mag|~setting when a \.{DVI} file is being printed.)

Finally, |k| and |x| allow the \.{DVI} writer to include a comment, which is not
interpreted further. The length of comment |x| is |k|, where |0<=k<256|.

@d id_byte=2 {identifies the kind of \.{DVI} files described here}

@ Font definitions for a given font number |k| contain further parameters
$$\hbox{|c[4]| |s[4]| |d[4]| |a[1]| |l[1]| |n[a+l]|.}$$
The four-byte value |c| is the check sum that \TeX\ found in the \.{TFM}
file for this font; |c| should match the check sum of the font found by
programs that read this \.{DVI} file.
@^check sum@>

Parameter |s| contains a fixed-point scale factor that is applied to
the character widths in font |k|; font dimensions in \.{TFM} files and
other font files are relative to this quantity, which is called the
``at size'' elsewhere in this documentation. The value of |s| is
always positive and less than $2^{27}$. It is given in the same units
as the other \.{DVI} dimensions, i.e., in sp when \TeX82 has made the
file.  Parameter |d| is similar to |s|; it is the ``design size,'' and
(like~|s|) it is given in \.{DVI} units. Thus, font |k| is to be used
at $|mag|\cdot s/1000d$ times its normal size.

The remaining part of a font definition gives the external name of the font,
which is an ASCII string of length |a+l|. The number |a| is the length
of the ``area'' or directory, and |l| is the length of the font name itself;
the standard local system font area is supposed to be used when |a=0|.
The |n| field contains the area in its first |a| bytes.

Font definitions must appear before the first use of a particular font number.
Once font |k| is defined, it must not be defined again; however, we
shall see below that font definitions appear in the postamble as well as
in the pages, so in this sense each font number is defined exactly twice,
if at all. Like |nop| commands, font definitions can
appear before the first |bop|, or between an |eop| and a |bop|.

@ Sometimes it is desirable to make horizontal or vertical rules line up
precisely with certain features in characters of a font. It is possible to
guarantee the correct matching between \.{DVI} output and the characters
generated by \MF\ by adhering to the following principles: (1)~The \MF\
characters should be positioned so that a bottom edge or left edge that is
supposed to line up with the bottom or left edge of a rule appears at the
reference point, i.e., in row~0 and column~0 of the \MF\ raster. This
ensures that the position of the rule will not be rounded differently when
the pixel size is not a perfect multiple of the units of measurement in
the \.{DVI} file. (2)~A typeset rule of height $a>0$ and width $b>0$
should be equivalent to a \MF-generated character having black pixels in
precisely those raster positions whose \MF\ coordinates satisfy
|0<=x<@t$\alpha$@>b| and |0<=y<@t$\alpha$@>a|, where $\alpha$ is the number
of pixels per \.{DVI} unit.
@:METAFONT}{\MF@>
@^alignment of rules with characters@>
@^rules aligning with characters@>

@ The last page in a \.{DVI} file is followed by `|post|'; this command
introduces the postamble, which summarizes important facts that \TeX\ has
accumulated about the file, making it possible to print subsets of the data
with reasonable efficiency. The postamble has the form
$$\vbox{\halign{\hbox{#\hfil}\cr
  |post| |p[4]| |num[4]| |den[4]| |mag[4]| |l[4]| |u[4]| |s[2]| |t[2]|\cr
  $\langle\,$font definitions$\,\rangle$\cr
  |post_post| |q[4]| |i[1]| 223's$[{\G}4]$\cr}}$$
Here |p| is a pointer to the final |bop| in the file. The next three
parameters, |num|, |den|, and |mag|, are duplicates of the quantities that
appeared in the preamble.

Parameters |l| and |u| give respectively the height-plus-depth of the tallest
page and the width of the widest page, in the same units as other dimensions
of the file. These numbers might be used by a \.{DVI}-reading program to
position individual ``pages'' on large sheets of film or paper; however,
the standard convention for output on normal size paper is to position each
page so that the upper left-hand corner is exactly one inch from the left
and the top. Experience has shown that it is unwise to design \.{DVI}-to-printer
software that attempts cleverly to center the output; a fixed position of
the upper left corner is easiest for users to understand and to work with.
Therefore |l| and~|u| are often ignored.

Parameter |s| is the maximum stack depth (i.e., the largest excess of
|push| commands over |pop| commands) needed to process this file. Then
comes |t|, the total number of pages (|bop| commands) present.

The postamble continues with font definitions, which are any number of
\\{fnt\_def} commands as described above, possibly interspersed with |nop|
commands. Each font number that is used in the \.{DVI} file must be defined
exactly twice: Once before it is first selected by a \\{fnt} command, and once
in the postamble.

@ The last part of the postamble, following the |post_post| byte that
signifies the end of the font definitions, contains |q|, a pointer to the
|post| command that started the postamble.  An identification byte, |i|,
comes next; this currently equals~2, as in the preamble.

The |i| byte is followed by four or more bytes that are all equal to
the decimal number 223 (i.e., @'337 in octal). \TeX\ puts out four to seven of
these trailing bytes, until the total length of the file is a multiple of
four bytes, since this works out best on machines that pack four bytes per
word; but any number of 223's is allowed, as long as there are at least four
of them. In effect, 223 is a sort of signature that is added at the very end.
@^Fuchs, David Raymond@>

This curious way to finish off a \.{DVI} file makes it feasible for
\.{DVI}-reading programs to find the postamble first, on most computers,
even though \TeX\ wants to write the postamble last. Most operating
systems permit random access to individual words or bytes of a file, so
the \.{DVI} reader can start at the end and skip backwards over the 223's
until finding the identification byte. Then it can back up four bytes, read
|q|, and move to byte |q| of the file. This byte should, of course,
contain the value 248 (|post|); now the postamble can be read, so the
\.{DVI} reader can discover all the information needed for typesetting the
pages. Note that it is also possible to skip through the \.{DVI} file at
reasonably high speed to locate a particular page, if that proves
desirable. This saves a lot of time, since \.{DVI} files used in production
jobs tend to be large.

Unfortunately, however, standard \PASCAL\ does not include the ability to
@^system dependencies@>
access a random position in a file, or even to determine the length of a file.
Almost all systems nowadays provide the necessary capabilities, so \.{DVI}
format has been designed to work most efficiently with modern operating systems.
But if \.{DVI} files have to be processed under the restrictions of standard
\PASCAL, one can simply read them from front to back, since the necessary
header information is present in the preamble and in the font definitions.
(The |l| and |u| and |s| and |t| parameters, which appear only in the
postamble, are ``frills'' that are handy but not absolutely necessary.)

@* \[32] Shipping pages out.
After considering \TeX's eyes and stomach, we come now to the bowels.
@^bowels@>

The |ship_out| procedure is given a pointer to a box; its mission is
to describe that box in \.{DVI} form, outputting a ``page'' to |dvi_file|.
The \.{DVI} coordinates $(h,v)=(0,0)$ should correspond to the upper left
corner of the box being shipped.

Since boxes can be inside of boxes inside of boxes, the main work of
|ship_out| is done by two mutually recursive routines, |hlist_out|
and |vlist_out|, which traverse the hlists and vlists inside of horizontal
and vertical boxes.

As individual pages are being processed, we need to accumulate
information about the entire set of pages, since such statistics must be
reported in the postamble. The global variables |total_pages|, |max_v|,
|max_h|, |max_push|, and |last_bop| are used to record this information.

The variable |doing_leaders| is |true| while leaders are being output.
The variable |dead_cycles| contains the number of times an output routine
has been initiated since the last |ship_out|.

A few additional global variables are also defined here for use in
|vlist_out| and |hlist_out|. They could have been local variables, but
that would waste stack space when boxes are deeply nested, since the
values of these variables are not needed during recursive calls.
@^recursion@>

@<Glob...@>=
@!total_pages:integer; {the number of pages that have been shipped out}
@!max_v:scaled; {maximum height-plus-depth of pages shipped so far}
@!max_h:scaled; {maximum width of pages shipped so far}
@!max_push:integer; {deepest nesting of |push| commands encountered so far}
@!last_bop:integer; {location of previous |bop| in the \.{DVI} output}
@!dead_cycles:integer; {recent outputs that didn't ship anything out}
@!doing_leaders:boolean; {are we inside a leader box?}
@#
@!c,@!f:quarterword; {character and font in current |char_node|}
@!rule_ht,@!rule_dp,@!rule_wd:scaled; {size of current rule being output}
@!g:pointer; {current glue specification}
@!lq,@!lr:integer; {quantities used in calculations for leaders}

@ @<Set init...@>=
total_pages:=0; max_v:=0; max_h:=0; max_push:=0; last_bop:=-1;
doing_leaders:=false; dead_cycles:=0; cur_s:=-1;

@ The \.{DVI} bytes are output to a buffer instead of being written directly
to the output file. This makes it possible to reduce the overhead of
subroutine calls, thereby measurably speeding up the computation, since
output of \.{DVI} bytes is part of \TeX's inner loop. And it has another
advantage as well, since we can change instructions in the buffer in order to
make the output more compact. For example, a `|down2|' command can be
changed to a `|y2|', thereby making a subsequent `|y0|' command possible,
saving two bytes.

The output buffer is divided into two parts of equal size; the bytes found
in |dvi_buf[0..half_buf-1]| constitute the first half, and those in
|dvi_buf[half_buf..dvi_buf_size-1]| constitute the second. The global
variable |dvi_ptr| points to the position that will receive the next
output byte. When |dvi_ptr| reaches |dvi_limit|, which is always equal
to one of the two values |half_buf| or |dvi_buf_size|, the half buffer that
is about to be invaded next is sent to the output and |dvi_limit| is
changed to its other value. Thus, there is always at least a half buffer's
worth of information present, except at the very beginning of the job.

Bytes of the \.{DVI} file are numbered sequentially starting with 0;
the next byte to be generated will be number |dvi_offset+dvi_ptr|.
A byte is present in the buffer only if its number is |>=dvi_gone|.

@<Types...@>=
@!dvi_index=0..dvi_buf_size; {an index into the output buffer}

@ Some systems may find it more efficient to make |dvi_buf| a |packed|
array, since output of four bytes at once may be facilitated.
@^system dependencies@>

@<Glob...@>=
@!dvi_buf:array[dvi_index] of eight_bits; {buffer for \.{DVI} output}
@!half_buf:dvi_index; {half of |dvi_buf_size|}
@!dvi_limit:dvi_index; {end of the current half buffer}
@!dvi_ptr:dvi_index; {the next available buffer address}
@!dvi_offset:integer; {|dvi_buf_size| times the number of times the
  output buffer has been fully emptied}
@!dvi_gone:integer; {the number of bytes already output to |dvi_file|}

@ Initially the buffer is all in one piece; we will output half of it only
after it first fills up.

@<Set init...@>=
half_buf:=dvi_buf_size div 2; dvi_limit:=dvi_buf_size; dvi_ptr:=0;
dvi_offset:=0; dvi_gone:=0;

@ The actual output of |dvi_buf[a..b]| to |dvi_file| is performed by calling
|write_dvi(a,b)|. For best results, this procedure should be optimized to
run as fast as possible on each particular system, since it is part of
\TeX's inner loop. It is safe to assume that |a| and |b+1| will both be
multiples of 4 when |write_dvi(a,b)| is called; therefore it is possible on
many machines to use efficient methods to pack four bytes per word and to
output an array of words with one system call.
@^system dependencies@>
@^inner loop@>
@^defecation@>

@p procedure write_dvi(@!a,@!b:dvi_index);
var k:dvi_index;
begin for k:=a to b do write(dvi_file,dvi_buf[k]);
end;

@ To put a byte in the buffer without paying the cost of invoking a procedure
each time, we use the macro |dvi_out|.

@d dvi_out(#)==@+begin dvi_buf[dvi_ptr]:=#; incr(dvi_ptr);
  if dvi_ptr=dvi_limit then dvi_swap;
  end

@p procedure dvi_swap; {outputs half of the buffer}
begin if dvi_limit=dvi_buf_size then
  begin write_dvi(0,half_buf-1); dvi_limit:=half_buf;
  dvi_offset:=dvi_offset+dvi_buf_size; dvi_ptr:=0;
  end
else  begin write_dvi(half_buf,dvi_buf_size-1); dvi_limit:=dvi_buf_size;
  end;
dvi_gone:=dvi_gone+half_buf;
end;

@ Here is how we clean out the buffer when \TeX\ is all through; |dvi_ptr|
will be a multiple of~4.

@<Empty the last bytes out of |dvi_buf|@>=
if dvi_limit=half_buf then write_dvi(half_buf,dvi_buf_size-1);
if dvi_ptr>0 then write_dvi(0,dvi_ptr-1)

@ The |dvi_four| procedure outputs four bytes in two's complement notation,
without risking arithmetic overflow.

@p procedure dvi_four(@!x:integer);
begin if x>=0 then dvi_out(x div @'100000000)
else  begin x:=x+@'10000000000;
  x:=x+@'10000000000;
  dvi_out((x div @'100000000) + 128);
  end;
x:=x mod @'100000000; dvi_out(x div @'200000);
x:=x mod @'200000; dvi_out(x div @'400);
dvi_out(x mod @'400);
end;

@ A mild optimization of the output is performed by the |dvi_pop|
routine, which issues a |pop| unless it is possible to cancel a
`|push| |pop|' pair. The parameter to |dvi_pop| is the byte address
following the old |push| that matches the new |pop|.

@p procedure dvi_pop(@!l:integer);
begin if (l=dvi_offset+dvi_ptr)and(dvi_ptr>0) then decr(dvi_ptr)
else dvi_out(pop);
end;

@ Here's a procedure that outputs a font definition. Since \TeX82 uses at
most 256 different fonts per job, |fnt_def1| is always used as the command code.

@p procedure dvi_font_def(@!f:internal_font_number);
var k:pool_pointer; {index into |str_pool|}
begin dvi_out(fnt_def1);
dvi_out(f-font_base-1);@/
dvi_out(qo(font_check[f].b0));
dvi_out(qo(font_check[f].b1));
dvi_out(qo(font_check[f].b2));
dvi_out(qo(font_check[f].b3));@/
dvi_four(font_size[f]);
dvi_four(font_dsize[f]);@/
dvi_out(length(font_area[f]));
dvi_out(length(font_name[f]));
@<Output the font name whose internal number is |f|@>;
end;

@ @<Output the font name whose internal number is |f|@>=
for k:=str_start[font_area[f]] to str_start[font_area[f]+1]-1 do
  dvi_out(so(str_pool[k]));
for k:=str_start[font_name[f]] to str_start[font_name[f]+1]-1 do
  dvi_out(so(str_pool[k]))

@ Versions of \TeX\ intended for small computers might well choose to omit
the ideas in the next few parts of this program, since it is not really
necessary to optimize the \.{DVI} code by making use of the |w0|, |x0|,
|y0|, and |z0| commands. Furthermore, the algorithm that we are about to
describe does not pretend to give an optimum reduction in the length
of the \.{DVI} code; after all, speed is more important than compactness.
But the method is surprisingly effective, and it takes comparatively little
time.

We can best understand the basic idea by first considering a simpler problem
that has the same essential characteristics. Given a sequence of digits,
say $3\,1\,4\,1\,5\,9\,2\,6\,5\,3\,5\,8\,9$, we want to assign subscripts
$d$, $y$, or $z$ to each digit so as to maximize the number of ``$y$-hits''
and ``$z$-hits''; a $y$-hit is an instance of two appearances of the same
digit with the subscript $y$, where no $y$'s intervene between the two
appearances, and a $z$-hit is defined similarly. For example, the sequence
above could be decorated with subscripts as follows:
$$3_z\,1_y\,4_d\,1_y\,5_y\,9_d\,2_d\,6_d\,5_y\,3_z\,5_y\,8_d\,9_d.$$
There are three $y$-hits ($1_y\ldots1_y$ and $5_y\ldots5_y\ldots5_y$) and
one $z$-hit ($3_z\ldots3_z$); there are no $d$-hits, since the two appearances
of $9_d$ have $d$'s between them, but we don't count $d$-hits so it doesn't
matter how many there are. These subscripts are analogous to the \.{DVI}
commands called \\{down}, $y$, and $z$, and the digits are analogous to
different amounts of vertical motion; a $y$-hit or $z$-hit corresponds to
the opportunity to use the one-byte commands |y0| or |z0| in a \.{DVI} file.

\TeX's method of assigning subscripts works like this: Append a new digit,
say $\delta$, to the right of the sequence. Now look back through the
sequence until one of the following things happens: (a)~You see
$\delta_y$ or $\delta_z$, and this was the first time you encountered a
$y$ or $z$ subscript, respectively.  Then assign $y$ or $z$ to the new
$\delta$; you have scored a hit. (b)~You see $\delta_d$, and no $y$
subscripts have been encountered so far during this search.  Then change
the previous $\delta_d$ to $\delta_y$ (this corresponds to changing a
command in the output buffer), and assign $y$ to the new $\delta$; it's
another hit.  (c)~You see $\delta_d$, and a $y$ subscript has been seen
but not a $z$.  Change the previous $\delta_d$ to $\delta_z$ and assign
$z$ to the new $\delta$. (d)~You encounter both $y$ and $z$ subscripts
before encountering a suitable $\delta$, or you scan all the way to the
front of the sequence. Assign $d$ to the new $\delta$; this assignment may
be changed later.

The subscripts $3_z\,1_y\,4_d\ldots\,$ in the example above were, in fact,
produced by this procedure, as the reader can verify. (Go ahead and try it.)

@ In order to implement such an idea, \TeX\ maintains a stack of pointers
to the \\{down}, $y$, and $z$ commands that have been generated for the
current page. And there is a similar stack for \\{right}, |w|, and |x|
commands. These stacks are called the down stack and right stack, and their
top elements are maintained in the variables |down_ptr| and |right_ptr|.

Each entry in these stacks contains four fields: The |width| field is
the amount of motion down or to the right; the |location| field is the
byte number of the \.{DVI} command in question (including the appropriate
|dvi_offset|); the |link| field points to the next item below this one
on the stack; and the |info| field encodes the options for possible change
in the \.{DVI} command.

@d movement_node_size=3 {number of words per entry in the down and right stacks}
@d location(#)==mem[#+2].int {\.{DVI} byte number for a movement command}

@<Glob...@>=
@!down_ptr,@!right_ptr:pointer; {heads of the down and right stacks}

@ @<Set init...@>=
down_ptr:=null; right_ptr:=null;

@ Here is a subroutine that produces a \.{DVI} command for some specified
downward or rightward motion. It has two parameters: |w| is the amount
of motion, and |o| is either |down1| or |right1|. We use the fact that
the command codes have convenient arithmetic properties: |y1-down1=w1-right1|
and |z1-down1=x1-right1|.

@p procedure movement(@!w:scaled;@!o:eight_bits);
label exit,found,not_found,2,1;
var mstate:small_number; {have we seen a |y| or |z|?}
@!p,@!q:pointer; {current and top nodes on the stack}
@!k:integer; {index into |dvi_buf|, modulo |dvi_buf_size|}
begin q:=get_node(movement_node_size); {new node for the top of the stack}
width(q):=w; location(q):=dvi_offset+dvi_ptr;
if o=down1 then
  begin link(q):=down_ptr; down_ptr:=q;
  end
else  begin link(q):=right_ptr; right_ptr:=q;
  end;
@<Look at the other stack entries until deciding what sort of \.{DVI} command
  to generate; |goto found| if node |p| is a ``hit''@>;
@<Generate a |down| or |right| command for |w| and |return|@>;
found: @<Generate a |y0| or |z0| command in order to reuse a previous
  appearance of~|w|@>;
exit:end;

@ The |info| fields in the entries of the down stack or the right stack
have six possible settings: |y_here| or |z_here| mean that the \.{DVI}
command refers to |y| or |z|, respectively (or to |w| or |x|, in the
case of horizontal motion); |yz_OK| means that the \.{DVI} command is
\\{down} (or \\{right}) but can be changed to either |y| or |z| (or
to either |w| or |x|); |y_OK| means that it is \\{down} and can be changed
to |y| but not |z|; |z_OK| is similar; and |d_fixed| means it must stay
\\{down}.

The four settings |yz_OK|, |y_OK|, |z_OK|, |d_fixed| would not need to
be distinguished from each other if we were simply solving the
digit-subscripting problem mentioned above. But in \TeX's case there is
a complication because of the nested structure of |push| and |pop|
commands. Suppose we add parentheses to the digit-subscripting problem,
redefining hits so that $\delta_y\ldots \delta_y$ is a hit if all $y$'s between
the $\delta$'s are enclosed in properly nested parentheses, and if the
parenthesis level of the right-hand $\delta_y$ is deeper than or equal to
that of the left-hand one. Thus, `(' and `)' correspond to `|push|'
and `|pop|'. Now if we want to assign a subscript to the final 1 in the
sequence
$$2_y\,7_d\,1_d\,(\,8_z\,2_y\,8_z\,)\,1$$
we cannot change the previous $1_d$ to $1_y$, since that would invalidate
the $2_y\ldots2_y$ hit. But we can change it to $1_z$, scoring a hit
since the intervening $8_z$'s are enclosed in parentheses.

The program below removes movement nodes that are introduced after a |push|,
before it outputs the corresponding |pop|.

@d y_here=1 {|info| when the movement entry points to a |y| command}
@d z_here=2 {|info| when the movement entry points to a |z| command}
@d yz_OK=3 {|info| corresponding to an unconstrained \\{down} command}
@d y_OK=4 {|info| corresponding to a \\{down} that can't become a |z|}
@d z_OK=5 {|info| corresponding to a \\{down} that can't become a |y|}
@d d_fixed=6 {|info| corresponding to a \\{down} that can't change}

@ When the |movement| procedure gets to the label |found|, the value of
|info(p)| will be either |y_here| or |z_here|. If it is, say, |y_here|,
the procedure generates a |y0| command (or a |w0| command), and marks
all |info| fields between |q| and |p| so that |y| is not OK in that range.

@<Generate a |y0| or |z0| command...@>=
info(q):=info(p);
if info(q)=y_here then
  begin dvi_out(o+y0-down1); {|y0| or |w0|}
  while link(q)<>p do
    begin q:=link(q);
    case info(q) of
    yz_OK: info(q):=z_OK;
    y_OK: info(q):=d_fixed;
    othercases do_nothing
    endcases;
    end;
  end
else  begin dvi_out(o+z0-down1); {|z0| or |x0|}
  while link(q)<>p do
    begin q:=link(q);
    case info(q) of
    yz_OK: info(q):=y_OK;
    z_OK: info(q):=d_fixed;
    othercases do_nothing
    endcases;
    end;
  end

@ @<Generate a |down| or |right|...@>=
info(q):=yz_OK;
if abs(w)>=@'40000000 then
  begin dvi_out(o+3); {|down4| or |right4|}
  dvi_four(w); return;
  end;
if abs(w)>=@'100000 then
  begin dvi_out(o+2); {|down3| or |right3|}
  if w<0 then w:=w+@'100000000;
  dvi_out(w div @'200000); w:=w mod @'200000; goto 2;
  end;
if abs(w)>=@'200 then
  begin dvi_out(o+1); {|down2| or |right2|}
  if w<0 then w:=w+@'200000;
  goto 2;
  end;
dvi_out(o); {|down1| or |right1|}
if w<0 then w:=w+@'400;
goto 1;
2: dvi_out(w div @'400);
1: dvi_out(w mod @'400); return

@ As we search through the stack, we are in one of three states,
|y_seen|, |z_seen|, or |none_seen|, depending on whether we have
encountered |y_here| or |z_here| nodes. These states are encoded as
multiples of 6, so that they can be added to the |info| fields for quick
decision-making.
@^inner loop@>

@d none_seen=0 {no |y_here| or |z_here| nodes have been encountered yet}
@d y_seen=6 {we have seen |y_here| but not |z_here|}
@d z_seen=12 {we have seen |z_here| but not |y_here|}

@<Look at the other stack entries until deciding...@>=
p:=link(q); mstate:=none_seen;
while p<>null do
  begin if width(p)=w then @<Consider a node with matching width;
    |goto found| if it's a hit@>
  else  case mstate+info(p) of
    none_seen+y_here: mstate:=y_seen;
    none_seen+z_here: mstate:=z_seen;
    y_seen+z_here,z_seen+y_here: goto not_found;
    othercases do_nothing
    endcases;
  p:=link(p);
  end;
not_found:

@ We might find a valid hit in a |y| or |z| byte that is already gone
from the buffer. But we can't change bytes that are gone forever; ``the
moving finger writes, $\ldots\,\,$.''

@<Consider a node with matching width...@>=
case mstate+info(p) of
none_seen+yz_OK,none_seen+y_OK,z_seen+yz_OK,z_seen+y_OK:@t@>@;@/
  if location(p)<dvi_gone then goto not_found
  else @<Change buffered instruction to |y| or |w| and |goto found|@>;
none_seen+z_OK,y_seen+yz_OK,y_seen+z_OK:@t@>@;@/
  if location(p)<dvi_gone then goto not_found
  else @<Change buffered instruction to |z| or |x| and |goto found|@>;
none_seen+y_here,none_seen+z_here,y_seen+z_here,z_seen+y_here: goto found;
othercases do_nothing
endcases

@ @<Change buffered instruction to |y| or |w| and |goto found|@>=
begin k:=location(p)-dvi_offset;
if k<0 then k:=k+dvi_buf_size;
dvi_buf[k]:=dvi_buf[k]+y1-down1;
info(p):=y_here; goto found;
end

@ @<Change buffered instruction to |z| or |x| and |goto found|@>=
begin k:=location(p)-dvi_offset;
if k<0 then k:=k+dvi_buf_size;
dvi_buf[k]:=dvi_buf[k]+z1-down1;
info(p):=z_here; goto found;
end

@ In case you are wondering when all the movement nodes are removed from
\TeX's memory, the answer is that they are recycled just before
|hlist_out| and |vlist_out| finish outputting a box. This restores the
down and right stacks to the state they were in before the box was output,
except that some |info|'s may have become more restrictive.

@p procedure prune_movements(@!l:integer);
  {delete movement nodes with |location>=l|}
label done,exit;
var p:pointer; {node being deleted}
begin while down_ptr<>null do
  begin if location(down_ptr)<l then goto done;
  p:=down_ptr; down_ptr:=link(p); free_node(p,movement_node_size);
  end;
done: while right_ptr<>null do
  begin if location(right_ptr)<l then return;
  p:=right_ptr; right_ptr:=link(p); free_node(p,movement_node_size);
  end;
exit:end;

@ The actual distances by which we want to move might be computed as the
sum of several separate movements. For example, there might be several
glue nodes in succession, or we might want to move right by the width of
some box plus some amount of glue. More importantly, the baselineskip
distances are computed in terms of glue together with the depth and
height of adjacent boxes, and we want the \.{DVI} file to lump these
three quantities together into a single motion.

Therefore, \TeX\ maintains two pairs of global variables: |dvi_h| and |dvi_v|
are the |h| and |v| coordinates corresponding to the commands actually
output to the \.{DVI} file, while |cur_h| and |cur_v| are the coordinates
corresponding to the current state of the output routines. Coordinate
changes will accumulate in |cur_h| and |cur_v| without being reflected
in the output, until such a change becomes necessary or desirable; we
can call the |movement| procedure whenever we want to make |dvi_h=cur_h|
or |dvi_v=cur_v|.

The current font reflected in the \.{DVI} output is called |dvi_f|;
there is no need for a `\\{cur\_f}' variable.

The depth of nesting of |hlist_out| and |vlist_out| is called |cur_s|;
this is essentially the depth of |push| commands in the \.{DVI} output.

@d synch_h==if cur_h<>dvi_h then
    begin movement(cur_h-dvi_h,right1); dvi_h:=cur_h;
    end
@d synch_v==if cur_v<>dvi_v then
    begin movement(cur_v-dvi_v,down1); dvi_v:=cur_v;
    end

@<Glob...@>=
@!dvi_h,@!dvi_v:scaled; {a \.{DVI} reader program thinks we are here}
@!cur_h,@!cur_v:scaled; {\TeX\ thinks we are here}
@!dvi_f:internal_font_number; {the current font}
@!cur_s:integer; {current depth of output box nesting, initially $-1$}

@ @<Initialize variables as |ship_out| begins@>=
dvi_h:=0; dvi_v:=0; cur_h:=h_offset; dvi_f:=null_font;
ensure_dvi_open;
if total_pages=0 then
  begin dvi_out(pre); dvi_out(id_byte); {output the preamble}
@^preamble of \.{DVI} file@>
  dvi_four(25400000); dvi_four(473628672); {conversion ratio for sp}
  prepare_mag; dvi_four(mag); {magnification factor is frozen}
  old_setting:=selector; selector:=new_string;
  print(" TeX output "); print_int(year); print_char(".");
  print_two(month); print_char("."); print_two(day);
  print_char(":"); print_two(time div 60);
  print_two(time mod 60);
  selector:=old_setting; dvi_out(cur_length);
  for s:=str_start[str_ptr] to pool_ptr-1 do dvi_out(so(str_pool[s]));
  pool_ptr:=str_start[str_ptr]; {flush the current string}
  end

@ When |hlist_out| is called, its duty is to output the box represented
by the |hlist_node| pointed to by |temp_ptr|. The reference point of that
box has coordinates |(cur_h,cur_v)|.

Similarly, when |vlist_out| is called, its duty is to output the box represented
by the |vlist_node| pointed to by |temp_ptr|. The reference point of that
box has coordinates |(cur_h,cur_v)|.
@^recursion@>

@p procedure@?vlist_out; forward; {|hlist_out| and |vlist_out| are mutually
  recursive}

@ The recursive procedures |hlist_out| and |vlist_out| each have local variables
|save_h| and |save_v| to hold the values of |dvi_h| and |dvi_v| just before
entering a new level of recursion.  In effect, the values of |save_h| and
|save_v| on \TeX's run-time stack correspond to the values of |h| and |v|
that a \.{DVI}-reading program will push onto its coordinate stack.

@d move_past=13 {go to this label when advancing past glue or a rule}
@d fin_rule=14 {go to this label to finish processing a rule}
@d next_p=15 {go to this label when finished with node |p|}

@p @t\4@>@<Declare procedures needed in |hlist_out|, |vlist_out|@>@t@>@/
procedure hlist_out; {output an |hlist_node| box}
label reswitch, move_past, fin_rule, next_p;
var base_line: scaled; {the baseline coordinate for this box}
@!left_edge: scaled; {the left coordinate for this box}
@!save_h,@!save_v: scaled; {what |dvi_h| and |dvi_v| should pop to}
@!this_box: pointer; {pointer to containing box}
@!g_order: glue_ord; {applicable order of infinity for glue}
@!g_sign: normal..shrinking; {selects type of glue}
@!p:pointer; {current position in the hlist}
@!save_loc:integer; {\.{DVI} byte location upon entry}
@!leader_box:pointer; {the leader box being replicated}
@!leader_wd:scaled; {width of leader box being replicated}
@!lx:scaled; {extra space between leader boxes}
@!outer_doing_leaders:boolean; {were we doing leaders?}
@!edge:scaled; {left edge of sub-box, or right edge of leader space}
@!glue_temp:real; {glue value before rounding}
@!cur_glue:real; {glue seen so far}
@!cur_g:scaled; {rounded equivalent of |cur_glue| times the glue ratio}
begin cur_g:=0; cur_glue:=float_constant(0);
this_box:=temp_ptr; g_order:=glue_order(this_box);
g_sign:=glue_sign(this_box); p:=list_ptr(this_box);
incr(cur_s);
if cur_s>0 then dvi_out(push);
if cur_s>max_push then max_push:=cur_s;
save_loc:=dvi_offset+dvi_ptr; base_line:=cur_v; left_edge:=cur_h;
while p<>null do @<Output node |p| for |hlist_out| and move to the next node,
  maintaining the condition |cur_v=base_line|@>;
prune_movements(save_loc);
if cur_s>0 then dvi_pop(save_loc);
decr(cur_s);
end;

@ We ought to give special care to the efficiency of one part of |hlist_out|,
since it belongs to \TeX's inner loop. When a |char_node| is encountered,
we save a little time by processing several nodes in succession until
reaching a non-|char_node|. The program uses the fact that |set_char_0=0|.
@^inner loop@>

@<Output node |p| for |hlist_out|...@>=
reswitch: if is_char_node(p) then
  begin synch_h; synch_v;
  repeat f:=font(p); c:=character(p);
  if f<>dvi_f then @<Change font |dvi_f| to |f|@>;
  if c>=qi(128) then dvi_out(set1);
  dvi_out(qo(c));@/
  cur_h:=cur_h+char_width(f)(char_info(f)(c));
  p:=link(p);
  until not is_char_node(p);
  dvi_h:=cur_h;
  end
else @<Output the non-|char_node| |p| for |hlist_out|
    and move to the next node@>

@ @<Change font |dvi_f| to |f|@>=
begin if not font_used[f] then
  begin dvi_font_def(f); font_used[f]:=true;
  end;
if f<=64+font_base then dvi_out(f-font_base-1+fnt_num_0)
else  begin dvi_out(fnt1); dvi_out(f-font_base-1);
  end;
dvi_f:=f;
end

@ @<Output the non-|char_node| |p| for |hlist_out|...@>=
begin case type(p) of
hlist_node,vlist_node:@<Output a box in an hlist@>;
rule_node: begin rule_ht:=height(p); rule_dp:=depth(p); rule_wd:=width(p);
  goto fin_rule;
  end;
whatsit_node: @<Output the whatsit node |p| in an hlist@>;
glue_node: @<Move right or output leaders@>;
kern_node,math_node:cur_h:=cur_h+width(p);
ligature_node: @<Make node |p| look like a |char_node| and |goto reswitch|@>;
othercases do_nothing
endcases;@/
goto next_p;
fin_rule: @<Output a rule in an hlist@>;
move_past: cur_h:=cur_h+rule_wd;
next_p:p:=link(p);
end

@ @<Output a box in an hlist@>=
if list_ptr(p)=null then cur_h:=cur_h+width(p)
else  begin save_h:=dvi_h; save_v:=dvi_v;
  cur_v:=base_line+shift_amount(p); {shift the box down}
  temp_ptr:=p; edge:=cur_h;
  if type(p)=vlist_node then vlist_out@+else hlist_out;
  dvi_h:=save_h; dvi_v:=save_v;
  cur_h:=edge+width(p); cur_v:=base_line;
  end

@ @<Output a rule in an hlist@>=
if is_running(rule_ht) then rule_ht:=height(this_box);
if is_running(rule_dp) then rule_dp:=depth(this_box);
rule_ht:=rule_ht+rule_dp; {this is the rule thickness}
if (rule_ht>0)and(rule_wd>0) then {we don't output empty rules}
  begin synch_h; cur_v:=base_line+rule_dp; synch_v;
  dvi_out(set_rule); dvi_four(rule_ht); dvi_four(rule_wd);
  cur_v:=base_line; dvi_h:=dvi_h+rule_wd;
  end

@ @d billion==float_constant(1000000000)
@d vet_glue(#)== glue_temp:=#;
  if glue_temp>billion then
           glue_temp:=billion
  else if glue_temp<-billion then
           glue_temp:=-billion

@<Move right or output leaders@>=
begin g:=glue_ptr(p); rule_wd:=width(g)-cur_g;
if g_sign<>normal then
  begin if g_sign=stretching then
    begin if stretch_order(g)=g_order then
      begin cur_glue:=cur_glue+stretch(g);
      vet_glue(float(glue_set(this_box))*cur_glue);
@^real multiplication@>
      cur_g:=round(glue_temp);
      end;
    end
  else if shrink_order(g)=g_order then
      begin cur_glue:=cur_glue-shrink(g);
      vet_glue(float(glue_set(this_box))*cur_glue);
      cur_g:=round(glue_temp);
      end;
  end;
rule_wd:=rule_wd+cur_g;
if subtype(p)>=a_leaders then
  @<Output leaders in an hlist, |goto fin_rule| if a rule
    or to |next_p| if done@>;
goto move_past;
end

@ @<Output leaders in an hlist...@>=
begin leader_box:=leader_ptr(p);
if type(leader_box)=rule_node then
  begin rule_ht:=height(leader_box); rule_dp:=depth(leader_box);
  goto fin_rule;
  end;
leader_wd:=width(leader_box);
if (leader_wd>0)and(rule_wd>0) then
  begin rule_wd:=rule_wd+10; {compensate for floating-point rounding}
  edge:=cur_h+rule_wd; lx:=0;
  @<Let |cur_h| be the position of the first box, and set |leader_wd+lx|
    to the spacing between corresponding parts of boxes@>;
  while cur_h+leader_wd<=edge do
    @<Output a leader box at |cur_h|,
      then advance |cur_h| by |leader_wd+lx|@>;
  cur_h:=edge-10; goto next_p;
  end;
end

@ The calculations related to leaders require a bit of care. First, in the
case of |a_leaders| (aligned leaders), we want to move |cur_h| to
|left_edge| plus the smallest multiple of |leader_wd| for which the result
is not less than the current value of |cur_h|; i.e., |cur_h| should become
$|left_edge|+|leader_wd|\times\lceil
(|cur_h|-|left_edge|)/|leader_wd|\rceil$.  The program here should work in
all cases even though some implementations of \PASCAL\ give nonstandard
results for the |div| operation when |cur_h| is less than |left_edge|.

In the case of |c_leaders| (centered leaders), we want to increase |cur_h|
by half of the excess space not occupied by the leaders; and in the
case of |x_leaders| (expanded leaders) we increase |cur_h|
by $1/(q+1)$ of this excess space, where $q$ is the number of times the
leader box will be replicated. Slight inaccuracies in the division might
accumulate; half of this rounding error is placed at each end of the leaders.

@<Let |cur_h| be the position of the first box, ...@>=
if subtype(p)=a_leaders then
  begin save_h:=cur_h;
  cur_h:=left_edge+leader_wd*((cur_h-left_edge)@!div leader_wd);
  if cur_h<save_h then cur_h:=cur_h+leader_wd;
  end
else  begin lq:=rule_wd div leader_wd; {the number of box copies}
  lr:=rule_wd mod leader_wd; {the remaining space}
  if subtype(p)=c_leaders then cur_h:=cur_h+(lr div 2)
  else  begin lx:=lr div (lq+1);
    cur_h:=cur_h+((lr-(lq-1)*lx) div 2);
    end;
  end

@ The `\\{synch}' operations here are intended to decrease the number of
bytes needed to specify horizontal and vertical motion in the \.{DVI} output.

@<Output a leader box at |cur_h|, ...@>=
begin cur_v:=base_line+shift_amount(leader_box); synch_v; save_v:=dvi_v;@/
synch_h; save_h:=dvi_h; temp_ptr:=leader_box;
outer_doing_leaders:=doing_leaders; doing_leaders:=true;
if type(leader_box)=vlist_node then vlist_out@+else hlist_out;
doing_leaders:=outer_doing_leaders;
dvi_v:=save_v; dvi_h:=save_h; cur_v:=base_line;
cur_h:=save_h+leader_wd+lx;
end

@ The |vlist_out| routine is similar to |hlist_out|, but a bit simpler.

@p procedure vlist_out; {output a |vlist_node| box}
label move_past, fin_rule, next_p;
var left_edge: scaled; {the left coordinate for this box}
@!top_edge: scaled; {the top coordinate for this box}
@!save_h,@!save_v: scaled; {what |dvi_h| and |dvi_v| should pop to}
@!this_box: pointer; {pointer to containing box}
@!g_order: glue_ord; {applicable order of infinity for glue}
@!g_sign: normal..shrinking; {selects type of glue}
@!p:pointer; {current position in the vlist}
@!save_loc:integer; {\.{DVI} byte location upon entry}
@!leader_box:pointer; {the leader box being replicated}
@!leader_ht:scaled; {height of leader box being replicated}
@!lx:scaled; {extra space between leader boxes}
@!outer_doing_leaders:boolean; {were we doing leaders?}
@!edge:scaled; {bottom boundary of leader space}
@!glue_temp:real; {glue value before rounding}
@!cur_glue:real; {glue seen so far}
@!cur_g:scaled; {rounded equivalent of |cur_glue| times the glue ratio}
begin cur_g:=0; cur_glue:=float_constant(0);
this_box:=temp_ptr; g_order:=glue_order(this_box);
g_sign:=glue_sign(this_box); p:=list_ptr(this_box);
incr(cur_s);
if cur_s>0 then dvi_out(push);
if cur_s>max_push then max_push:=cur_s;
save_loc:=dvi_offset+dvi_ptr; left_edge:=cur_h; cur_v:=cur_v-height(this_box);
top_edge:=cur_v;
while p<>null do @<Output node |p| for |vlist_out| and move to the next node,
  maintaining the condition |cur_h=left_edge|@>;
prune_movements(save_loc);
if cur_s>0 then dvi_pop(save_loc);
decr(cur_s);
end;

@ @<Output node |p| for |vlist_out|...@>=
begin if is_char_node(p) then confusion("vlistout")
@:this can't happen vlistout}{\quad vlistout@>
else @<Output the non-|char_node| |p| for |vlist_out|@>;
next_p:p:=link(p);
end

@ @<Output the non-|char_node| |p| for |vlist_out|@>=
begin case type(p) of
hlist_node,vlist_node:@<Output a box in a vlist@>;
rule_node: begin rule_ht:=height(p); rule_dp:=depth(p); rule_wd:=width(p);
  goto fin_rule;
  end;
whatsit_node: @<Output the whatsit node |p| in a vlist@>;
glue_node: @<Move down or output leaders@>;
kern_node:cur_v:=cur_v+width(p);
othercases do_nothing
endcases;@/
goto next_p;
fin_rule: @<Output a rule in a vlist, |goto next_p|@>;
move_past: cur_v:=cur_v+rule_ht;
end

@ The |synch_v| here allows the \.{DVI} output to use one-byte commands
for adjusting |v| in most cases, since the baselineskip distance will
usually be constant.

@<Output a box in a vlist@>=
if list_ptr(p)=null then cur_v:=cur_v+height(p)+depth(p)
else  begin cur_v:=cur_v+height(p); synch_v;
  save_h:=dvi_h; save_v:=dvi_v;
  cur_h:=left_edge+shift_amount(p); {shift the box right}
  temp_ptr:=p;
  if type(p)=vlist_node then vlist_out@+else hlist_out;
  dvi_h:=save_h; dvi_v:=save_v;
  cur_v:=save_v+depth(p); cur_h:=left_edge;
  end

@ @<Output a rule in a vlist...@>=
if is_running(rule_wd) then rule_wd:=width(this_box);
rule_ht:=rule_ht+rule_dp; {this is the rule thickness}
cur_v:=cur_v+rule_ht;
if (rule_ht>0)and(rule_wd>0) then {we don't output empty rules}
  begin synch_h; synch_v;
  dvi_out(put_rule); dvi_four(rule_ht); dvi_four(rule_wd);
  end;
goto next_p

@ @<Move down or output leaders@>=
begin g:=glue_ptr(p); rule_ht:=width(g)-cur_g;
if g_sign<>normal then
  begin if g_sign=stretching then
    begin if stretch_order(g)=g_order then
      begin cur_glue:=cur_glue+stretch(g);
      vet_glue(float(glue_set(this_box))*cur_glue);
@^real multiplication@>
      cur_g:=round(glue_temp);
      end;
    end
  else if shrink_order(g)=g_order then
      begin cur_glue:=cur_glue-shrink(g);
      vet_glue(float(glue_set(this_box))*cur_glue);
      cur_g:=round(glue_temp);
      end;
  end;
rule_ht:=rule_ht+cur_g;
if subtype(p)>=a_leaders then
  @<Output leaders in a vlist, |goto fin_rule| if a rule
    or to |next_p| if done@>;
goto move_past;
end

@ @<Output leaders in a vlist...@>=
begin leader_box:=leader_ptr(p);
if type(leader_box)=rule_node then
  begin rule_wd:=width(leader_box); rule_dp:=0;
  goto fin_rule;
  end;
leader_ht:=height(leader_box)+depth(leader_box);
if (leader_ht>0)and(rule_ht>0) then
  begin rule_ht:=rule_ht+10; {compensate for floating-point rounding}
  edge:=cur_v+rule_ht; lx:=0;
  @<Let |cur_v| be the position of the first box, and set |leader_ht+lx|
    to the spacing between corresponding parts of boxes@>;
  while cur_v+leader_ht<=edge do
    @<Output a leader box at |cur_v|,
      then advance |cur_v| by |leader_ht+lx|@>;
  cur_v:=edge-10; goto next_p;
  end;
end

@ @<Let |cur_v| be the position of the first box, ...@>=
if subtype(p)=a_leaders then
  begin save_v:=cur_v;
  cur_v:=top_edge+leader_ht*((cur_v-top_edge)@!div leader_ht);
  if cur_v<save_v then cur_v:=cur_v+leader_ht;
  end
else  begin lq:=rule_ht div leader_ht; {the number of box copies}
  lr:=rule_ht mod leader_ht; {the remaining space}
  if subtype(p)=c_leaders then cur_v:=cur_v+(lr div 2)
  else  begin lx:=lr div (lq+1);
    cur_v:=cur_v+((lr-(lq-1)*lx) div 2);
    end;
  end

@ When we reach this part of the program, |cur_v| indicates the top of a
leader box, not its baseline.

@<Output a leader box at |cur_v|, ...@>=
begin cur_h:=left_edge+shift_amount(leader_box); synch_h; save_h:=dvi_h;@/
cur_v:=cur_v+height(leader_box); synch_v; save_v:=dvi_v;
temp_ptr:=leader_box;
outer_doing_leaders:=doing_leaders; doing_leaders:=true;
if type(leader_box)=vlist_node then vlist_out@+else hlist_out;
doing_leaders:=outer_doing_leaders;
dvi_v:=save_v; dvi_h:=save_h; cur_h:=left_edge;
cur_v:=save_v-height(leader_box)+leader_ht+lx;
end

@ The |hlist_out| and |vlist_out| procedures are now complete, so we are
ready for the |ship_out| routine that gets them started in the first place.

@p procedure ship_out(@!p:pointer); {output the box |p|}
label done;
var page_loc:integer; {location of the current |bop|}
@!j,@!k:0..9; {indices to first ten count registers}
@!s:pool_pointer; {index into |str_pool|}
@!old_setting:0..max_selector; {saved |selector| setting}
begin if tracing_output>0 then
  begin print_nl(""); print_ln;
  print("Completed box being shipped out");
@.Completed box...@>
  end;
if term_offset>max_print_line-9 then print_ln
else if (term_offset>0)or(file_offset>0) then print_char(" ");
print_char("["); j:=9;
while (count(j)=0)and(j>0) do decr(j);
for k:=0 to j do
  begin print_int(count(k));
  if k<j then print_char(".");
  end;
update_terminal;
if tracing_output>0 then
  begin print_char("]");
  begin_diagnostic; show_box(p); end_diagnostic(true);
  end;
@<Ship box |p| out@>;
if tracing_output<=0 then print_char("]");
dead_cycles:=0;
update_terminal; {progress report}
@<Flush the box from memory, showing statistics if requested@>;
end;

@ @<Flush the box from memory, showing statistics if requested@>=
@!stat if tracing_stats>1 then
  begin print_nl("Memory usage before: ");
@.Memory usage...@>
  print_int(var_used); print_char("&");
  print_int(dyn_used); print_char(";");
  end;
tats@/
flush_node_list(p);
@!stat if tracing_stats>1 then
  begin print(" after: ");
  print_int(var_used); print_char("&");
  print_int(dyn_used); print("; still untouched: ");
  print_int(hi_mem_min-lo_mem_max-1); print_ln;
  end;
tats

@ @<Ship box |p| out@>=
@<Update the values of |max_h| and |max_v|; but if the page is too large,
  |goto done|@>;
@<Initialize variables as |ship_out| begins@>;
page_loc:=dvi_offset+dvi_ptr;
dvi_out(bop);
for k:=0 to 9 do dvi_four(count(k));
dvi_four(last_bop); last_bop:=page_loc;
cur_v:=height(p)+v_offset; temp_ptr:=p;
if type(p)=vlist_node then vlist_out@+else hlist_out;
dvi_out(eop); incr(total_pages); cur_s:=-1;
done:

@ Sometimes the user will generate a huge page because other error messages
are being ignored. Such pages are not output to the \.{dvi} file, since they
may confuse the printing software.

@<Update the values of |max_h| and |max_v|; but if the page is too large...@>=
if (height(p)>max_dimen)or@|(depth(p)>max_dimen)or@|
   (height(p)+depth(p)+v_offset>max_dimen)or@|
   (width(p)+h_offset>max_dimen) then
  begin print_err("Huge page cannot be shipped out");
@.Huge page...@>
  help2("The page just created is more than 18 feet tall or")@/
   ("more than 18 feet wide, so I suspect something went wrong.");
  error;
  if tracing_output<=0 then
    begin begin_diagnostic;
    print_nl("The following box has been deleted:");
@.The following...deleted@>
    show_box(p);
    end_diagnostic(true);
    end;
  goto done;
  end;
if height(p)+depth(p)+v_offset>max_v then max_v:=height(p)+depth(p)+v_offset;
if width(p)+h_offset>max_h then max_h:=width(p)+h_offset

@ At the end of the program, we must finish things off by writing the
post\-amble. If |total_pages=0|, the \.{DVI} file was never opened.
If |total_pages>=65536|, the \.{DVI} file will lie.

An integer variable |k| will be declared for use by this routine.

@<Finish the \.{DVI} file@>=
while cur_s>-1 do
  begin if cur_s>0 then dvi_out(pop)
  else  begin dvi_out(eop); incr(total_pages);
    end;
  decr(cur_s);
  end;
if total_pages=0 then print_nl("No pages of output.")
@.No pages of output@>
else  begin dvi_out(post); {beginning of the postamble}
  dvi_four(last_bop); last_bop:=dvi_offset+dvi_ptr-5; {|post| location}
  dvi_four(25400000); dvi_four(473628672); {conversion ratio for sp}
  prepare_mag; dvi_four(mag); {magnification factor}
  dvi_four(max_v); dvi_four(max_h);@/
  dvi_out(max_push div 256); dvi_out(max_push mod 256);@/
  dvi_out((total_pages div 256) mod 256); dvi_out(total_pages mod 256);@/
  @<Output the font definitions for all fonts that were used@>;
  dvi_out(post_post); dvi_four(last_bop); dvi_out(id_byte);@/
  k:=4+((dvi_buf_size-dvi_ptr) mod 4); {the number of 223's}
  while k>0 do
    begin dvi_out(223); decr(k);
    end;
  @<Empty the last bytes out of |dvi_buf|@>;
  print_nl("Output written on "); slow_print(output_file_name);
@.Output written on x@>
  print(" ("); print_int(total_pages); print(" page");
  if total_pages<>1 then print_char("s");
  print(", "); print_int(dvi_offset+dvi_ptr); print(" bytes).");
  b_close(dvi_file);
  end

@ @<Output the font definitions...@>=
while font_ptr>font_base do
  begin if font_used[font_ptr] then dvi_font_def(font_ptr);
  decr(font_ptr);
  end

@* \[33] Packaging.
We're essentially done with the parts of \TeX\ that are concerned with
the input (|get_next|) and the output (|ship_out|). So it's time to
get heavily into the remaining part, which does the real work of typesetting.

After lists are constructed, \TeX\ wraps them up and puts them into boxes.
Two major subroutines are given the responsibility for this task: |hpack|
applies to horizontal lists (hlists) and |vpack| applies to vertical lists
(vlists). The main duty of |hpack| and |vpack| is to compute the dimensions
of the resulting boxes, and to adjust the glue if one of those dimensions
is pre-specified. The computed sizes normally enclose all of the material
inside the new box; but some items may stick out if negative glue is used,
if the box is overfull, or if a \.{\\vbox} includes other boxes that have
been shifted left.

The subroutine call |hpack(p,w,m)| returns a pointer to an |hlist_node|
for a box containing the hlist that starts at |p|. Parameter |w| specifies
a width; and parameter |m| is either `|exactly|' or `|additional|'.  Thus,
|hpack(p,w,exactly)| produces a box whose width is exactly |w|, while
|hpack(p,w,additional)| yields a box whose width is the natural width plus
|w|.  It is convenient to define a macro called `|natural|' to cover the
most common case, so that we can say |hpack(p,natural)| to get a box that
has the natural width of list |p|.

Similarly, |vpack(p,w,m)| returns a pointer to a |vlist_node| for a
box containing the vlist that starts at |p|. In this case |w| represents
a height instead of a width; the parameter |m| is interpreted as in |hpack|.

@d exactly=0 {a box dimension is pre-specified}
@d additional=1 {a box dimension is increased from the natural one}
@d natural==0,additional {shorthand for parameters to |hpack| and |vpack|}

@ The parameters to |hpack| and |vpack| correspond to \TeX's primitives
like `\.{\\hbox} \.{to} \.{300pt}', `\.{\\hbox} \.{spread} \.{10pt}'; note
that `\.{\\hbox}' with no dimension following it is equivalent to
`\.{\\hbox} \.{spread} \.{0pt}'.  The |scan_spec| subroutine scans such
constructions in the user's input, including the mandatory left brace that
follows them, and it puts the specification onto |save_stack| so that the
desired box can later be obtained by executing the following code:
$$\vbox{\halign{#\hfil\cr
|save_ptr:=save_ptr-2;|\cr
|hpack(p,saved(1),saved(0)).|\cr}}$$
Special care is necessary to ensure that the special |save_stack| codes
are placed just below the new group code, because scanning can change
|save_stack| when \.{\\csname} appears.

@p procedure scan_spec(@!c:group_code;@!three_codes:boolean);
  {scans a box specification and left brace}
label found;
var @!s:integer; {temporarily saved value}
@!spec_code:exactly..additional;
begin if three_codes then s:=saved(0);
if scan_keyword("to") then spec_code:=exactly
@.to@>
else if scan_keyword("spread") then spec_code:=additional
@.spread@>
else  begin spec_code:=additional; cur_val:=0;
  goto found;
  end;
scan_normal_dimen;
found: if three_codes then
  begin saved(0):=s; incr(save_ptr);
  end;
saved(0):=spec_code; saved(1):=cur_val; save_ptr:=save_ptr+2;
new_save_level(c); scan_left_brace;
end;

@ To figure out the glue setting, |hpack| and |vpack| determine how much
stretchability and shrinkability are present, considering all four orders
of infinity. The highest order of infinity that has a nonzero coefficient
is then used as if no other orders were present.

For example, suppose that the given list contains six glue nodes with
the respective stretchabilities 3pt, 8fill, 5fil, 6pt, $-3$fil, $-8$fill.
Then the total is essentially 2fil; and if a total additional space of 6pt
is to be achieved by stretching, the actual amounts of stretch will be
0pt, 0pt, 15pt, 0pt, $-9$pt, and 0pt, since only `fil' glue will be
considered. (The `fill' glue is therefore not really stretching infinitely
with respect to `fil'; nobody would actually want that to happen.)

The arrays |total_stretch| and |total_shrink| are used to determine how much
glue of each kind is present. A global variable |last_badness| is used
to implement \.{\\badness}.

@<Glob...@>=
@!total_stretch, @!total_shrink: array[glue_ord] of scaled;
  {glue found by |hpack| or |vpack|}
@!last_badness:integer; {badness of the most recently packaged box}

@ If the global variable |adjust_tail| is non-null, the |hpack| routine
also removes all occurrences of |ins_node|, |mark_node|, and |adjust_node|
items and appends the resulting material onto the list that ends at
location |adjust_tail|.

@< Glob...@>=
@!adjust_tail:pointer; {tail of adjustment list}

@ @<Set init...@>=adjust_tail:=null; last_badness:=0;

@ Here now is |hpack|, which contains few if any surprises.

@p function hpack(@!p:pointer;@!w:scaled;@!m:small_number):pointer;
label reswitch, common_ending, exit;
var r:pointer; {the box node that will be returned}
@!q:pointer; {trails behind |p|}
@!h,@!d,@!x:scaled; {height, depth, and natural width}
@!s:scaled; {shift amount}
@!g:pointer; {points to a glue specification}
@!o:glue_ord; {order of infinity}
@!f:internal_font_number; {the font in a |char_node|}
@!i:four_quarters; {font information about a |char_node|}
@!hd:eight_bits; {height and depth indices for a character}
begin last_badness:=0; r:=get_node(box_node_size); type(r):=hlist_node;
subtype(r):=min_quarterword; shift_amount(r):=0;
q:=r+list_offset; link(q):=p;@/
h:=0; @<Clear dimensions to zero@>;
while p<>null do @<Examine node |p| in the hlist, taking account of its effect
  on the dimensions of the new box, or moving it to the adjustment list;
  then advance |p| to the next node@>;
if adjust_tail<>null then link(adjust_tail):=null;
height(r):=h; depth(r):=d;@/
@<Determine the value of |width(r)| and the appropriate glue setting;
  then |return| or |goto common_ending|@>;
common_ending: @<Finish issuing a diagnostic message
      for an overfull or underfull hbox@>;
exit: hpack:=r;
end;

@ @<Clear dimensions to zero@>=
d:=0; x:=0;
total_stretch[normal]:=0; total_shrink[normal]:=0;
total_stretch[fil]:=0; total_shrink[fil]:=0;
total_stretch[fill]:=0; total_shrink[fill]:=0;
total_stretch[filll]:=0; total_shrink[filll]:=0

@ @<Examine node |p| in the hlist, taking account of its effect...@>=
@^inner loop@>
begin reswitch: while is_char_node(p) do
  @<Incorporate character dimensions into the dimensions of
    the hbox that will contain~it, then move to the next node@>;
if p<>null then
  begin case type(p) of
  hlist_node,vlist_node,rule_node,unset_node:
    @<Incorporate box dimensions into the dimensions of
      the hbox that will contain~it@>;
  ins_node,mark_node,adjust_node: if adjust_tail<>null then
    @<Transfer node |p| to the adjustment list@>;
  whatsit_node:@<Incorporate a whatsit node into an hbox@>;
  glue_node:@<Incorporate glue into the horizontal totals@>;
  kern_node,math_node: x:=x+width(p);
  ligature_node: @<Make node |p| look like a |char_node|
    and |goto reswitch|@>;
  othercases do_nothing
  endcases;@/
  p:=link(p);
  end;
end


@ @<Make node |p| look like a |char_node| and |goto reswitch|@>=
begin mem[lig_trick]:=mem[lig_char(p)]; link(lig_trick):=link(p);
p:=lig_trick; goto reswitch;
end

@ The code here implicitly uses the fact that running dimensions are
indicated by |null_flag|, which will be ignored in the calculations
because it is a highly negative number.

@<Incorporate box dimensions into the dimensions of the hbox...@>=
begin x:=x+width(p);
if type(p)>=rule_node then s:=0 @+else s:=shift_amount(p);
if height(p)-s>h then h:=height(p)-s;
if depth(p)+s>d then d:=depth(p)+s;
end

@ The following code is part of \TeX's inner loop; i.e., adding another
character of text to the user's input will cause each of these instructions
to be exercised one more time.
@^inner loop@>

@<Incorporate character dimensions into the dimensions of the hbox...@>=
begin f:=font(p); i:=char_info(f)(character(p)); hd:=height_depth(i);
x:=x+char_width(f)(i);@/
s:=char_height(f)(hd);@+if s>h then h:=s;
s:=char_depth(f)(hd);@+if s>d then d:=s;
p:=link(p);
end

@ Although node |q| is not necessarily the immediate predecessor of node |p|,
it always points to some node in the list preceding |p|. Thus, we can delete
nodes by moving |q| when necessary. The algorithm takes linear time, and the
extra computation does not intrude on the inner loop unless it is necessary
to make a deletion.
@^inner loop@>

@<Transfer node |p| to the adjustment list@>=
begin while link(q)<>p do q:=link(q);
if type(p)=adjust_node then
  begin link(adjust_tail):=adjust_ptr(p);
  while link(adjust_tail)<>null do adjust_tail:=link(adjust_tail);
  p:=link(p); free_node(link(q),small_node_size);
  end
else  begin link(adjust_tail):=p; adjust_tail:=p; p:=link(p);
  end;
link(q):=p; p:=q;
end

@ @<Incorporate glue into the horizontal totals@>=
begin g:=glue_ptr(p); x:=x+width(g);@/
o:=stretch_order(g); total_stretch[o]:=total_stretch[o]+stretch(g);
o:=shrink_order(g); total_shrink[o]:=total_shrink[o]+shrink(g);
if subtype(p)>=a_leaders then
  begin g:=leader_ptr(p);
  if height(g)>h then h:=height(g);
  if depth(g)>d then d:=depth(g);
  end;
end

@ When we get to the present part of the program, |x| is the natural width
of the box being packaged.

@<Determine the value of |width(r)| and the appropriate glue setting...@>=
if m=additional then w:=x+w;
width(r):=w; x:=w-x; {now |x| is the excess to be made up}
if x=0 then
  begin glue_sign(r):=normal; glue_order(r):=normal;
  set_glue_ratio_zero(glue_set(r));
  return;
  end
else if x>0 then @<Determine horizontal glue stretch setting, then |return|
    or \hbox{|goto common_ending|}@>
else @<Determine horizontal glue shrink setting, then |return|
    or \hbox{|goto common_ending|}@>

@ @<Determine horizontal glue stretch setting...@>=
begin @<Determine the stretch order@>;
glue_order(r):=o; glue_sign(r):=stretching;
if total_stretch[o]<>0 then glue_set(r):=unfloat(x/total_stretch[o])
@^real division@>
else  begin glue_sign(r):=normal;
  set_glue_ratio_zero(glue_set(r)); {there's nothing to stretch}
  end;
if o=normal then if list_ptr(r)<>null then
  @<Report an underfull hbox and |goto common_ending|, if this box
    is sufficiently bad@>;
return;
end

@ @<Determine the stretch order@>=
if total_stretch[filll]<>0 then o:=filll
else if total_stretch[fill]<>0 then o:=fill
else if total_stretch[fil]<>0 then o:=fil
else o:=normal

@ @<Report an underfull hbox and |goto common_ending|, if...@>=
begin last_badness:=badness(x,total_stretch[normal]);
if last_badness>hbadness then
  begin print_ln;
  if last_badness>100 then print_nl("Underfull")@+else print_nl("Loose");
  print(" \hbox (badness "); print_int(last_badness);
@.Underfull \\hbox...@>
@.Loose \\hbox...@>
  goto common_ending;
  end;
end

@ In order to provide a decent indication of where an overfull or underfull
box originated, we use a global variable |pack_begin_line| that is
set nonzero only when |hpack| is being called by the paragraph builder
or the alignment finishing routine.

@<Glob...@>=
@!pack_begin_line:integer; {source file line where the current paragraph
  or alignment began; a negative value denotes alignment}

@ @<Set init...@>=
pack_begin_line:=0;

@ @<Finish issuing a diagnostic message for an overfull or underfull hbox@>=
if output_active then print(") has occurred while \output is active")
else  begin if pack_begin_line<>0 then
    begin if pack_begin_line>0 then print(") in paragraph at lines ")
    else print(") in alignment at lines ");
    print_int(abs(pack_begin_line));
    print("--");
    end
  else print(") detected at line ");
  print_int(line);
  end;
print_ln;@/
font_in_short_display:=null_font; short_display(list_ptr(r)); print_ln;@/
begin_diagnostic; show_box(r); end_diagnostic(true)

@ @<Determine horizontal glue shrink setting...@>=
begin @<Determine the shrink order@>;
glue_order(r):=o; glue_sign(r):=shrinking;
if total_shrink[o]<>0 then glue_set(r):=unfloat((-x)/total_shrink[o])
@^real division@>
else  begin glue_sign(r):=normal;
  set_glue_ratio_zero(glue_set(r)); {there's nothing to shrink}
  end;
if (total_shrink[o]<-x)and(o=normal)and(list_ptr(r)<>null) then
  begin last_badness:=1000000;
  set_glue_ratio_one(glue_set(r)); {use the maximum shrinkage}
  @<Report an overfull hbox and |goto common_ending|, if this box
    is sufficiently bad@>;
  end
else if o=normal then if list_ptr(r)<>null then
  @<Report a tight hbox and |goto common_ending|, if this box
    is sufficiently bad@>;
return;
end

@ @<Determine the shrink order@>=
if total_shrink[filll]<>0 then o:=filll
else if total_shrink[fill]<>0 then o:=fill
else if total_shrink[fil]<>0 then o:=fil
else o:=normal

@ @<Report an overfull hbox and |goto common_ending|, if...@>=
if (-x-total_shrink[normal]>hfuzz)or(hbadness<100) then
  begin if (overfull_rule>0)and(-x-total_shrink[normal]>hfuzz) then
    begin while link(q)<>null do q:=link(q);
    link(q):=new_rule;
    width(link(q)):=overfull_rule;
    end;
  print_ln; print_nl("Overfull \hbox (");
@.Overfull \\hbox...@>
  print_scaled(-x-total_shrink[normal]); print("pt too wide");
  goto common_ending;
  end

@ @<Report a tight hbox and |goto common_ending|, if...@>=
begin last_badness:=badness(-x,total_shrink[normal]);
if last_badness>hbadness then
  begin print_ln; print_nl("Tight \hbox (badness "); print_int(last_badness);
@.Tight \\hbox...@>
  goto common_ending;
  end;
end

@ The |vpack| subroutine is actually a special case of a slightly more
general routine called |vpackage|, which has four parameters. The fourth
parameter, which is |max_dimen| in the case of |vpack|, specifies the
maximum depth of the page box that is constructed. The depth is first
computed by the normal rules; if it exceeds this limit, the reference
point is simply moved down until the limiting depth is attained.

@d vpack(#)==vpackage(#,max_dimen) {special case of unconstrained depth}

@p function vpackage(@!p:pointer;@!h:scaled;@!m:small_number;@!l:scaled):
  pointer;
label common_ending, exit;
var r:pointer; {the box node that will be returned}
@!w,@!d,@!x:scaled; {width, depth, and natural height}
@!s:scaled; {shift amount}
@!g:pointer; {points to a glue specification}
@!o:glue_ord; {order of infinity}
begin last_badness:=0; r:=get_node(box_node_size); type(r):=vlist_node;
subtype(r):=min_quarterword; shift_amount(r):=0;
list_ptr(r):=p;@/
w:=0; @<Clear dimensions to zero@>;
while p<>null do @<Examine node |p| in the vlist, taking account of its effect
  on the dimensions of the new box; then advance |p| to the next node@>;
width(r):=w;
if d>l then
  begin x:=x+d-l; depth(r):=l;
  end
else depth(r):=d;
@<Determine the value of |height(r)| and the appropriate glue setting;
  then |return| or |goto common_ending|@>;
common_ending: @<Finish issuing a diagnostic message
      for an overfull or underfull vbox@>;
exit: vpackage:=r;
end;

@ @<Examine node |p| in the vlist, taking account of its effect...@>=
begin if is_char_node(p) then confusion("vpack")
@:this can't happen vpack}{\quad vpack@>
else  case type(p) of
  hlist_node,vlist_node,rule_node,unset_node:
    @<Incorporate box dimensions into the dimensions of
      the vbox that will contain~it@>;
  whatsit_node:@<Incorporate a whatsit node into a vbox@>;
  glue_node: @<Incorporate glue into the vertical totals@>;
  kern_node: begin x:=x+d+width(p); d:=0;
    end;
  othercases do_nothing
  endcases;
p:=link(p);
end

@ @<Incorporate box dimensions into the dimensions of the vbox...@>=
begin x:=x+d+height(p); d:=depth(p);
if type(p)>=rule_node then s:=0 @+else s:=shift_amount(p);
if width(p)+s>w then w:=width(p)+s;
end

@ @<Incorporate glue into the vertical totals@>=
begin x:=x+d; d:=0;@/
g:=glue_ptr(p); x:=x+width(g);@/
o:=stretch_order(g); total_stretch[o]:=total_stretch[o]+stretch(g);
o:=shrink_order(g); total_shrink[o]:=total_shrink[o]+shrink(g);
if subtype(p)>=a_leaders then
  begin g:=leader_ptr(p);
  if width(g)>w then w:=width(g);
  end;
end

@ When we get to the present part of the program, |x| is the natural height
of the box being packaged.

@<Determine the value of |height(r)| and the appropriate glue setting...@>=
if m=additional then h:=x+h;
height(r):=h; x:=h-x; {now |x| is the excess to be made up}
if x=0 then
  begin glue_sign(r):=normal; glue_order(r):=normal;
  set_glue_ratio_zero(glue_set(r));
  return;
  end
else if x>0 then @<Determine vertical glue stretch setting, then |return|
    or \hbox{|goto common_ending|}@>
else @<Determine vertical glue shrink setting, then |return|
    or \hbox{|goto common_ending|}@>

@ @<Determine vertical glue stretch setting...@>=
begin @<Determine the stretch order@>;
glue_order(r):=o; glue_sign(r):=stretching;
if total_stretch[o]<>0 then glue_set(r):=unfloat(x/total_stretch[o])
@^real division@>
else  begin glue_sign(r):=normal;
  set_glue_ratio_zero(glue_set(r)); {there's nothing to stretch}
  end;
if o=normal then if list_ptr(r)<>null then
  @<Report an underfull vbox and |goto common_ending|, if this box
    is sufficiently bad@>;
return;
end

@ @<Report an underfull vbox and |goto common_ending|, if...@>=
begin last_badness:=badness(x,total_stretch[normal]);
if last_badness>vbadness then
  begin print_ln;
  if last_badness>100 then print_nl("Underfull")@+else print_nl("Loose");
  print(" \vbox (badness "); print_int(last_badness);
@.Underfull \\vbox...@>
@.Loose \\vbox...@>
  goto common_ending;
  end;
end

@ @<Finish issuing a diagnostic message for an overfull or underfull vbox@>=
if output_active then print(") has occurred while \output is active")
else  begin if pack_begin_line<>0 then {it's actually negative}
    begin print(") in alignment at lines ");
    print_int(abs(pack_begin_line));
    print("--");
    end
  else print(") detected at line ");
  print_int(line);
  print_ln;@/
  end;
begin_diagnostic; show_box(r); end_diagnostic(true)

@ @<Determine vertical glue shrink setting...@>=
begin @<Determine the shrink order@>;
glue_order(r):=o; glue_sign(r):=shrinking;
if total_shrink[o]<>0 then glue_set(r):=unfloat((-x)/total_shrink[o])
@^real division@>
else  begin glue_sign(r):=normal;
  set_glue_ratio_zero(glue_set(r)); {there's nothing to shrink}
  end;
if (total_shrink[o]<-x)and(o=normal)and(list_ptr(r)<>null) then
  begin last_badness:=1000000;
  set_glue_ratio_one(glue_set(r)); {use the maximum shrinkage}
  @<Report an overfull vbox and |goto common_ending|, if this box
    is sufficiently bad@>;
  end
else if o=normal then if list_ptr(r)<>null then
  @<Report a tight vbox and |goto common_ending|, if this box
    is sufficiently bad@>;
return;
end

@ @<Report an overfull vbox and |goto common_ending|, if...@>=
if (-x-total_shrink[normal]>vfuzz)or(vbadness<100) then
  begin print_ln; print_nl("Overfull \vbox (");
@.Overfull \\vbox...@>
  print_scaled(-x-total_shrink[normal]); print("pt too high");
  goto common_ending;
  end

@ @<Report a tight vbox and |goto common_ending|, if...@>=
begin last_badness:=badness(-x,total_shrink[normal]);
if last_badness>vbadness then
  begin print_ln; print_nl("Tight \vbox (badness "); print_int(last_badness);
@.Tight \\vbox...@>
  goto common_ending;
  end;
end

@ When a box is being appended to the current vertical list, the
baselineskip calculation is handled by the |append_to_vlist| routine.

@p procedure append_to_vlist(@!b:pointer);
var d:scaled; {deficiency of space between baselines}
@!p:pointer; {a new glue specification}
begin if prev_depth>ignore_depth then
  begin d:=width(baseline_skip)-prev_depth-height(b);
  if d<line_skip_limit then p:=new_param_glue(line_skip_code)
  else  begin p:=new_skip_param(baseline_skip_code);
    width(temp_ptr):=d; {|temp_ptr=glue_ptr(p)|}
    end;
  link(tail):=p; tail:=p;
  end;
link(tail):=b; tail:=b; prev_depth:=depth(b);
end;

@* \[34] Data structures for math mode.
When \TeX\ reads a formula that is enclosed between \.\$'s, it constructs an
{\sl mlist}, which is essentially a tree structure representing that
formula.  An mlist is a linear sequence of items, but we can regard it as
a tree structure because mlists can appear within mlists. For example, many
of the entries can be subscripted or superscripted, and such ``scripts''
are mlists in their own right.

An entire formula is parsed into such a tree before any of the actual
typesetting is done, because the current style of type is usually not
known until the formula has been fully scanned. For example, when the
formula `\.{\$a+b \\over c+d\$}' is being read, there is no way to tell
that `\.{a+b}' will be in script size until `\.{\\over}' has appeared.

During the scanning process, each element of the mlist being built is
classified as a relation, a binary operator, an open parenthesis, etc.,
or as a construct like `\.{\\sqrt}' that must be built up. This classification
appears in the mlist data structure.

After a formula has been fully scanned, the mlist is converted to an hlist
so that it can be incorporated into the surrounding text. This conversion is
controlled by a recursive procedure that decides all of the appropriate
styles by a ``top-down'' process starting at the outermost level and working
in towards the subformulas. The formula is ultimately pasted together using
combinations of horizontal and vertical boxes, with glue and penalty nodes
inserted as necessary.

An mlist is represented internally as a linked list consisting chiefly
of ``noads'' (pronounced ``no-adds''), to distinguish them from the somewhat
similar ``nodes'' in hlists and vlists. Certain kinds of ordinary nodes are
allowed to appear in mlists together with the noads; \TeX\ tells the difference
by means of the |type| field, since a noad's |type| is always greater than
that of a node. An mlist does not contain character nodes, hlist nodes, vlist
nodes, math nodes, ligature nodes,
or unset nodes; in particular, each mlist item appears in the
variable-size part of |mem|, so the |type| field is always present.

@ Each noad is four or more words long. The first word contains the |type|
and |subtype| and |link| fields that are already so familiar to us; the
second, third, and fourth words are called the noad's |nucleus|, |subscr|,
and |supscr| fields.

Consider, for example, the simple formula `\.{\$x\^2\$}', which would be
parsed into an mlist containing a single element called an |ord_noad|.
The |nucleus| of this noad is a representation of `\.x', the |subscr| is
empty, and the |supscr| is a representation of `\.2'.

The |nucleus|, |subscr|, and |supscr| fields are further broken into
subfields. If |p| points to a noad, and if |q| is one of its principal
fields (e.g., |q=subscr(p)|), there are several possibilities for the
subfields, depending on the |math_type| of |q|.

\yskip\hang|math_type(q)=math_char| means that |fam(q)| refers to one of
the sixteen font families, and |character(q)| is the number of a character
within a font of that family, as in a character node.

\yskip\hang|math_type(q)=math_text_char| is similar, but the character is
unsubscripted and unsuperscripted and it is followed immediately by another
character from the same font. (This |math_type| setting appears only
briefly during the processing; it is used to suppress unwanted italic
corrections.)

\yskip\hang|math_type(q)=empty| indicates a field with no value (the
corresponding attribute of noad |p| is not present).

\yskip\hang|math_type(q)=sub_box| means that |info(q)| points to a box
node (either an |hlist_node| or a |vlist_node|) that should be used as the
value of the field.  The |shift_amount| in the subsidiary box node is the
amount by which that box will be shifted downward.

\yskip\hang|math_type(q)=sub_mlist| means that |info(q)| points to
an mlist; the mlist must be converted to an hlist in order to obtain
the value of this field.

\yskip\noindent In the latter case, we might have |info(q)=null|. This
is not the same as |math_type(q)=empty|; for example, `\.{\$P\_\{\}\$}'
and `\.{\$P\$}' produce different results (the former will not have the
``italic correction'' added to the width of |P|, but the ``script skip''
will be added).

The definitions of subfields given here are evidently wasteful of space,
since a halfword is being used for the |math_type| although only three
bits would be needed. However, there are hardly ever many noads present at
once, since they are soon converted to nodes that take up even more space,
so we can afford to represent them in whatever way simplifies the
programming.

@d noad_size=4 {number of words in a normal noad}
@d nucleus(#)==#+1 {the |nucleus| field of a noad}
@d supscr(#)==#+2 {the |supscr| field of a noad}
@d subscr(#)==#+3 {the |subscr| field of a noad}
@d math_type==link {a |halfword| in |mem|}
@d fam==font {a |quarterword| in |mem|}
@d math_char=1 {|math_type| when the attribute is simple}
@d sub_box=2 {|math_type| when the attribute is a box}
@d sub_mlist=3 {|math_type| when the attribute is a formula}
@d math_text_char=4 {|math_type| when italic correction is dubious}

@ Each portion of a formula is classified as Ord, Op, Bin, Rel, Ope,
Clo, Pun, or Inn, for purposes of spacing and line breaking. An
|ord_noad|, |op_noad|, |bin_noad|, |rel_noad|, |open_noad|, |close_noad|,
|punct_noad|, or |inner_noad| is used to represent portions of the various
types. For example, an `\.=' sign in a formula leads to the creation of a
|rel_noad| whose |nucleus| field is a representation of an equals sign
(usually |fam=0|, |character=@'75|).  A formula preceded by \.{\\mathrel}
also results in a |rel_noad|.  When a |rel_noad| is followed by an
|op_noad|, say, and possibly separated by one or more ordinary nodes (not
noads), \TeX\ will insert a penalty node (with the current |rel_penalty|)
just after the formula that corresponds to the |rel_noad|, unless there
already was a penalty immediately following; and a ``thick space'' will be
inserted just before the formula that corresponds to the |op_noad|.

A noad of type |ord_noad|, |op_noad|, \dots, |inner_noad| usually
has a |subtype=normal|. The only exception is that an |op_noad| might
have |subtype=limits| or |no_limits|, if the normal positioning of
limits has been overridden for this operator.

@d ord_noad=unset_node+3 {|type| of a noad classified Ord}
@d op_noad=ord_noad+1 {|type| of a noad classified Op}
@d bin_noad=ord_noad+2 {|type| of a noad classified Bin}
@d rel_noad=ord_noad+3 {|type| of a noad classified Rel}
@d open_noad=ord_noad+4 {|type| of a noad classified Ope}
@d close_noad=ord_noad+5 {|type| of a noad classified Clo}
@d punct_noad=ord_noad+6 {|type| of a noad classified Pun}
@d inner_noad=ord_noad+7 {|type| of a noad classified Inn}
@d limits=1 {|subtype| of |op_noad| whose scripts are to be above, below}
@d no_limits=2 {|subtype| of |op_noad| whose scripts are to be normal}

@ A |radical_noad| is five words long; the fifth word is the |left_delimiter|
field, which usually represents a square root sign.

A |fraction_noad| is six words long; it has a |right_delimiter| field
as well as a |left_delimiter|.

Delimiter fields are of type |four_quarters|, and they have four subfields
called |small_fam|, |small_char|, |large_fam|, |large_char|. These subfields
represent variable-size delimiters by giving the ``small'' and ``large''
starting characters, as explained in Chapter~17 of {\sl The \TeX book}.
@:TeXbook}{\sl The \TeX book@>

A |fraction_noad| is actually quite different from all other noads. Not
only does it have six words, it has |thickness|, |denominator|, and
|numerator| fields instead of |nucleus|, |subscr|, and |supscr|. The
|thickness| is a scaled value that tells how thick to make a fraction
rule; however, the special value |default_code| is used to stand for the
|default_rule_thickness| of the current size. The |numerator| and
|denominator| point to mlists that define a fraction; we always have
$$\hbox{|math_type(numerator)=math_type(denominator)=sub_mlist|}.$$ The
|left_delimiter| and |right_delimiter| fields specify delimiters that will
be placed at the left and right of the fraction. In this way, a
|fraction_noad| is able to represent all of \TeX's operators \.{\\over},
\.{\\atop}, \.{\\above}, \.{\\overwithdelims}, \.{\\atopwithdelims}, and
 \.{\\abovewithdelims}.

@d left_delimiter(#)==#+4 {first delimiter field of a noad}
@d right_delimiter(#)==#+5 {second delimiter field of a fraction noad}
@d radical_noad=inner_noad+1 {|type| of a noad for square roots}
@d radical_noad_size=5 {number of |mem| words in a radical noad}
@d fraction_noad=radical_noad+1 {|type| of a noad for generalized fractions}
@d fraction_noad_size=6 {number of |mem| words in a fraction noad}
@d small_fam(#)==mem[#].qqqq.b0 {|fam| for ``small'' delimiter}
@d small_char(#)==mem[#].qqqq.b1 {|character| for ``small'' delimiter}
@d large_fam(#)==mem[#].qqqq.b2 {|fam| for ``large'' delimiter}
@d large_char(#)==mem[#].qqqq.b3 {|character| for ``large'' delimiter}
@d thickness==width {|thickness| field in a fraction noad}
@d default_code==@'10000000000 {denotes |default_rule_thickness|}
@d numerator==supscr {|numerator| field in a fraction noad}
@d denominator==subscr {|denominator| field in a fraction noad}

@ The global variable |empty_field| is set up for initialization of empty
fields in new noads. Similarly, |null_delimiter| is for the initialization
of delimiter fields.

@<Glob...@>=
@!empty_field:two_halves;
@!null_delimiter:four_quarters;

@ @<Set init...@>=
empty_field.rh:=empty; empty_field.lh:=null;@/
null_delimiter.b0:=0; null_delimiter.b1:=min_quarterword;@/
null_delimiter.b2:=0; null_delimiter.b3:=min_quarterword;

@ The |new_noad| function creates an |ord_noad| that is completely null.

@p function new_noad:pointer;
var p:pointer;
begin p:=get_node(noad_size);
type(p):=ord_noad; subtype(p):=normal;
mem[nucleus(p)].hh:=empty_field;
mem[subscr(p)].hh:=empty_field;
mem[supscr(p)].hh:=empty_field;
new_noad:=p;
end;

@ A few more kinds of noads will complete the set: An |under_noad| has its
nucleus underlined; an |over_noad| has it overlined. An |accent_noad| places
an accent over its nucleus; the accent character appears as
|fam(accent_chr(p))| and |character(accent_chr(p))|. A |vcenter_noad|
centers its nucleus vertically with respect to the axis of the formula;
in such noads we always have |math_type(nucleus(p))=sub_box|.

And finally, we have |left_noad| and |right_noad| types, to implement
\TeX's \.{\\left} and \.{\\right}. The |nucleus| of such noads is
replaced by a |delimiter| field; thus, for example, `\.{\\left(}' produces
a |left_noad| such that |delimiter(p)| holds the family and character
codes for all left parentheses. A |left_noad| never appears in an mlist
except as the first element, and a |right_noad| never appears in an mlist
except as the last element; furthermore, we either have both a |left_noad|
and a |right_noad|, or neither one is present. The |subscr| and |supscr|
fields are always |empty| in a |left_noad| and a |right_noad|.

@d under_noad=fraction_noad+1 {|type| of a noad for underlining}
@d over_noad=under_noad+1 {|type| of a noad for overlining}
@d accent_noad=over_noad+1 {|type| of a noad for accented subformulas}
@d accent_noad_size=5 {number of |mem| words in an accent noad}
@d accent_chr(#)==#+4 {the |accent_chr| field of an accent noad}
@d vcenter_noad=accent_noad+1 {|type| of a noad for \.{\\vcenter}}
@d left_noad=vcenter_noad+1 {|type| of a noad for \.{\\left}}
@d right_noad=left_noad+1 {|type| of a noad for \.{\\right}}
@d delimiter==nucleus {|delimiter| field in left and right noads}
@d scripts_allowed(#)==(type(#)>=ord_noad)and(type(#)<left_noad)

@ Math formulas can also contain instructions like \.{\\textstyle} that
override \TeX's normal style rules. A |style_node| is inserted into the
data structure to record such instructions; it is three words long, so it
is considered a node instead of a noad. The |subtype| is either |display_style|
or |text_style| or |script_style| or |script_script_style|. The
second and third words of a |style_node| are not used, but they are
present because a |choice_node| is converted to a |style_node|.

\TeX\ uses even numbers 0, 2, 4, 6 to encode the basic styles
|display_style|, \dots, |script_script_style|, and adds~1 to get the
``cramped'' versions of these styles. This gives a numerical order that
is backwards from the convention of Appendix~G in {\sl The \TeX book\/};
i.e., a smaller style has a larger numerical value.
@:TeXbook}{\sl The \TeX book@>

@d style_node=unset_node+1 {|type| of a style node}
@d style_node_size=3 {number of words in a style node}
@d display_style=0 {|subtype| for \.{\\displaystyle}}
@d text_style=2 {|subtype| for \.{\\textstyle}}
@d script_style=4 {|subtype| for \.{\\scriptstyle}}
@d script_script_style=6 {|subtype| for \.{\\scriptscriptstyle}}
@d cramped=1 {add this to an uncramped style if you want to cramp it}

@p function new_style(@!s:small_number):pointer; {create a style node}
var p:pointer; {the new node}
begin p:=get_node(style_node_size); type(p):=style_node;
subtype(p):=s; width(p):=0; depth(p):=0; {the |width| and |depth| are not used}
new_style:=p;
end;

@ Finally, the \.{\\mathchoice} primitive creates a |choice_node|, which
has special subfields |display_mlist|, |text_mlist|, |script_mlist|,
and |script_script_mlist| pointing to the mlists for each style.

@d choice_node=unset_node+2 {|type| of a choice node}
@d display_mlist(#)==info(#+1) {mlist to be used in display style}
@d text_mlist(#)==link(#+1) {mlist to be used in text style}
@d script_mlist(#)==info(#+2) {mlist to be used in script style}
@d script_script_mlist(#)==link(#+2) {mlist to be used in scriptscript style}

@p function new_choice:pointer; {create a choice node}
var p:pointer; {the new node}
begin p:=get_node(style_node_size); type(p):=choice_node;
subtype(p):=0; {the |subtype| is not used}
display_mlist(p):=null; text_mlist(p):=null; script_mlist(p):=null;
script_script_mlist(p):=null;
new_choice:=p;
end;

@ Let's consider now the previously unwritten part of |show_node_list|
that displays the things that can only be present in mlists; this
program illustrates how to access the data structures just defined.

In the context of the following program, |p| points to a node or noad that
should be displayed, and the current string contains the ``recursion history''
that leads to this point. The recursion history consists of a dot for each
outer level in which |p| is subsidiary to some node, or in which |p| is
subsidiary to the |nucleus| field of some noad; the dot is replaced by
`\.\_' or `\.\^' or `\./' or `\.\\' if |p| is descended from the |subscr|
or |supscr| or |denominator| or |numerator| fields of noads. For example,
the current string would be `\.{.\^.\_/}' if |p| points to the |ord_noad| for
|x| in the (ridiculous) formula
`\.{\$\\sqrt\{a\^\{\\mathinner\{b\_\{c\\over x+y\}\}\}\}\$}'.

@<Cases of |show_node_list| that arise...@>=
style_node:print_style(subtype(p));
choice_node:@<Display choice node |p|@>;
ord_noad,op_noad,bin_noad,rel_noad,open_noad,close_noad,punct_noad,inner_noad,
  radical_noad,over_noad,under_noad,vcenter_noad,accent_noad,
  left_noad,right_noad:@<Display normal noad |p|@>;
fraction_noad:@<Display fraction noad |p|@>;

@ Here are some simple routines used in the display of noads.

@<Declare procedures needed for displaying the elements of mlists@>=
procedure print_fam_and_char(@!p:pointer); {prints family and character}
begin print_esc("fam"); print_int(fam(p)); print_char(" ");
print_ASCII(qo(character(p)));
end;
@#
procedure print_delimiter(@!p:pointer); {prints a delimiter as 24-bit hex value}
var a:integer; {accumulator}
begin a:=small_fam(p)*256+qo(small_char(p));
a:=a*@"1000+large_fam(p)*256+qo(large_char(p));
if a<0 then print_int(a) {this should never happen}
else print_hex(a);
end;

@ The next subroutine will descend to another level of recursion when a
subsidiary mlist needs to be displayed. The parameter |c| indicates what
character is to become part of the recursion history. An empty mlist is
distinguished from a field with |math_type(p)=empty|, because these are
not equivalent (as explained above).
@^recursion@>

@<Declare procedures needed for displaying...@>=
procedure@?show_info; forward;@t\2@>@?{|show_node_list(info(temp_ptr))|}
procedure print_subsidiary_data(@!p:pointer;@!c:ASCII_code);
  {display a noad field}
begin if cur_length>=depth_threshold then
  begin if math_type(p)<>empty then print(" []");
  end
else  begin append_char(c); {include |c| in the recursion history}
  temp_ptr:=p; {prepare for |show_info| if recursion is needed}
  case math_type(p) of
  math_char: begin print_ln; print_current_string; print_fam_and_char(p);
    end;
  sub_box: show_info; {recursive call}
  sub_mlist: if info(p)=null then
      begin print_ln; print_current_string; print("{}");
      end
    else show_info; {recursive call}
  othercases do_nothing {|empty|}
  endcases;@/
  flush_char; {remove |c| from the recursion history}
  end;
end;

@ The inelegant introduction of |show_info| in the code above seems better
than the alternative of using \PASCAL's strange |forward| declaration for a
procedure with parameters. The \PASCAL\ convention about dropping parameters
from a post-|forward| procedure is, frankly, so intolerable to the author
of \TeX\ that he would rather stoop to communication via a global temporary
variable. (A similar stoopidity occurred with respect to |hlist_out| and
|vlist_out| above, and it will occur with respect to |mlist_to_hlist| below.)
@^Knuth, Donald Ervin@>
@:PASCAL}{\PASCAL@>

@p procedure show_info; {the reader will kindly forgive this}
begin show_node_list(info(temp_ptr));
end;

@ @<Declare procedures needed for displaying...@>=
procedure print_style(@!c:integer);
begin case c div 2 of
0: print_esc("displaystyle"); {|display_style=0|}
1: print_esc("textstyle"); {|text_style=2|}
2: print_esc("scriptstyle"); {|script_style=4|}
3: print_esc("scriptscriptstyle"); {|script_script_style=6|}
othercases print("Unknown style!")
endcases;
end;

@ @<Display choice node |p|@>=
begin print_esc("mathchoice");
append_char("D"); show_node_list(display_mlist(p)); flush_char;
append_char("T"); show_node_list(text_mlist(p)); flush_char;
append_char("S"); show_node_list(script_mlist(p)); flush_char;
append_char("s"); show_node_list(script_script_mlist(p)); flush_char;
end

@ @<Display normal noad |p|@>=
begin case type(p) of
ord_noad: print_esc("mathord");
op_noad: print_esc("mathop");
bin_noad: print_esc("mathbin");
rel_noad: print_esc("mathrel");
open_noad: print_esc("mathopen");
close_noad: print_esc("mathclose");
punct_noad: print_esc("mathpunct");
inner_noad: print_esc("mathinner");
over_noad: print_esc("overline");
under_noad: print_esc("underline");
vcenter_noad: print_esc("vcenter");
radical_noad: begin print_esc("radical"); print_delimiter(left_delimiter(p));
  end;
accent_noad: begin print_esc("accent"); print_fam_and_char(accent_chr(p));
  end;
left_noad: begin print_esc("left"); print_delimiter(nucleus(p));
  end;
right_noad: begin print_esc("right"); print_delimiter(nucleus(p));
  end;
end;
if subtype(p)<>normal then
  if subtype(p)=limits then print_esc("limits")
  else print_esc("nolimits");
if type(p)<left_noad then print_subsidiary_data(nucleus(p),".");
print_subsidiary_data(supscr(p),"^");
print_subsidiary_data(subscr(p),"_");
end

@ @<Display fraction noad |p|@>=
begin print_esc("fraction, thickness ");
if thickness(p)=default_code then print("= default")
else print_scaled(thickness(p));
if (small_fam(left_delimiter(p))<>0)or@+
  (small_char(left_delimiter(p))<>min_quarterword)or@|
  (large_fam(left_delimiter(p))<>0)or@|
  (large_char(left_delimiter(p))<>min_quarterword) then
  begin print(", left-delimiter "); print_delimiter(left_delimiter(p));
  end;
if (small_fam(right_delimiter(p))<>0)or@|
  (small_char(right_delimiter(p))<>min_quarterword)or@|
  (large_fam(right_delimiter(p))<>0)or@|
  (large_char(right_delimiter(p))<>min_quarterword) then
  begin print(", right-delimiter "); print_delimiter(right_delimiter(p));
  end;
print_subsidiary_data(numerator(p),"\");
print_subsidiary_data(denominator(p),"/");
end

@ That which can be displayed can also be destroyed.

@<Cases of |flush_node_list| that arise...@>=
style_node: begin free_node(p,style_node_size); goto done;
  end;
choice_node:begin flush_node_list(display_mlist(p));
  flush_node_list(text_mlist(p));
  flush_node_list(script_mlist(p));
  flush_node_list(script_script_mlist(p));
  free_node(p,style_node_size); goto done;
  end;
ord_noad,op_noad,bin_noad,rel_noad,open_noad,close_noad,punct_noad,inner_noad,
  radical_noad,over_noad,under_noad,vcenter_noad,accent_noad:@t@>@;@/
  begin if math_type(nucleus(p))>=sub_box then
    flush_node_list(info(nucleus(p)));
  if math_type(supscr(p))>=sub_box then
    flush_node_list(info(supscr(p)));
  if math_type(subscr(p))>=sub_box then
    flush_node_list(info(subscr(p)));
  if type(p)=radical_noad then free_node(p,radical_noad_size)
  else if type(p)=accent_noad then free_node(p,accent_noad_size)
  else free_node(p,noad_size);
  goto done;
  end;
left_noad,right_noad: begin free_node(p,noad_size); goto done;
  end;
fraction_noad: begin flush_node_list(info(numerator(p)));
  flush_node_list(info(denominator(p)));
  free_node(p,fraction_noad_size); goto done;
  end;

@* \[35] Subroutines for math mode.
In order to convert mlists to hlists, i.e., noads to nodes, we need several
subroutines that are conveniently dealt with now.

Let us first introduce the macros that make it easy to get at the parameters and
other font information. A size code, which is a multiple of 16, is added to a
family number to get an index into the table of internal font numbers
for each combination of family and size.  (Be alert: Size codes get
larger as the type gets smaller.)

@d text_size=0 {size code for the largest size in a family}
@d script_size=16 {size code for the medium size in a family}
@d script_script_size=32 {size code for the smallest size in a family}

@<Basic printing procedures@>=
procedure print_size(@!s:integer);
begin if s=0 then print_esc("textfont")
else if s=script_size then print_esc("scriptfont")
else print_esc("scriptscriptfont");
end;

@ Before an mlist is converted to an hlist, \TeX\ makes sure that
the fonts in family~2 have enough parameters to be math-symbol
fonts, and that the fonts in family~3 have enough parameters to be
math-extension fonts. The math-symbol parameters are referred to by using the
following macros, which take a size code as their parameter; for example,
|num1(cur_size)| gives the value of the |num1| parameter for the current size.
@^parameters for symbols@>
@^font parameters@>

@d mathsy_end(#)==fam_fnt(2+#)]].sc
@d mathsy(#)==font_info[#+param_base[mathsy_end
@d math_x_height==mathsy(5) {height of `\.x'}
@d math_quad==mathsy(6) {\.{18mu}}
@d num1==mathsy(8) {numerator shift-up in display styles}
@d num2==mathsy(9) {numerator shift-up in non-display, non-\.{\\atop}}
@d num3==mathsy(10) {numerator shift-up in non-display \.{\\atop}}
@d denom1==mathsy(11) {denominator shift-down in display styles}
@d denom2==mathsy(12) {denominator shift-down in non-display styles}
@d sup1==mathsy(13) {superscript shift-up in uncramped display style}
@d sup2==mathsy(14) {superscript shift-up in uncramped non-display}
@d sup3==mathsy(15) {superscript shift-up in cramped styles}
@d sub1==mathsy(16) {subscript shift-down if superscript is absent}
@d sub2==mathsy(17) {subscript shift-down if superscript is present}
@d sup_drop==mathsy(18) {superscript baseline below top of large box}
@d sub_drop==mathsy(19) {subscript baseline below bottom of large box}
@d delim1==mathsy(20) {size of \.{\\atopwithdelims} delimiters
  in display styles}
@d delim2==mathsy(21) {size of \.{\\atopwithdelims} delimiters in non-displays}
@d axis_height==mathsy(22) {height of fraction lines above the baseline}
@d total_mathsy_params=22

@ The math-extension parameters have similar macros, but the size code is
omitted (since it is always |cur_size| when we refer to such parameters).
@^parameters for symbols@>
@^font parameters@>

@d mathex(#)==font_info[#+param_base[fam_fnt(3+cur_size)]].sc
@d default_rule_thickness==mathex(8) {thickness of \.{\\over} bars}
@d big_op_spacing1==mathex(9) {minimum clearance above a displayed op}
@d big_op_spacing2==mathex(10) {minimum clearance below a displayed op}
@d big_op_spacing3==mathex(11) {minimum baselineskip above displayed op}
@d big_op_spacing4==mathex(12) {minimum baselineskip below displayed op}
@d big_op_spacing5==mathex(13) {padding above and below displayed limits}
@d total_mathex_params=13

@ We also need to compute the change in style between mlists and their
subsidiaries. The following macros define the subsidiary style for
an overlined nucleus (|cramped_style|), for a subscript or a superscript
(|sub_style| or |sup_style|), or for a numerator or denominator (|num_style|
or |denom_style|).

@d cramped_style(#)==2*(# div 2)+cramped {cramp the style}
@d sub_style(#)==2*(# div 4)+script_style+cramped {smaller and cramped}
@d sup_style(#)==2*(# div 4)+script_style+(# mod 2) {smaller}
@d num_style(#)==#+2-2*(# div 6) {smaller unless already script-script}
@d denom_style(#)==2*(# div 2)+cramped+2-2*(# div 6) {smaller, cramped}

@ When the style changes, the following piece of program computes associated
information:

@<Set up the values of |cur_size| and |cur_mu|, based on |cur_style|@>=
begin if cur_style<script_style then cur_size:=text_size
else cur_size:=16*((cur_style-text_style) div 2);
cur_mu:=x_over_n(math_quad(cur_size),18);
end

@ Here is a function that returns a pointer to a rule node having a given
thickness |t|. The rule will extend horizontally to the boundary of the vlist
that eventually contains it.

@p function fraction_rule(@!t:scaled):pointer;
  {construct the bar for a fraction}
var p:pointer; {the new node}
begin p:=new_rule; height(p):=t; depth(p):=0; fraction_rule:=p;
end;

@ The |overbar| function returns a pointer to a vlist box that consists of
a given box |b|, above which has been placed a kern of height |k| under a
fraction rule of thickness |t| under additional space of height |t|.

@p function overbar(@!b:pointer;@!k,@!t:scaled):pointer;
var p,@!q:pointer; {nodes being constructed}
begin p:=new_kern(k); link(p):=b; q:=fraction_rule(t); link(q):=p;
p:=new_kern(t); link(p):=q; overbar:=vpack(p,natural);
end;

@ The |var_delimiter| function, which finds or constructs a sufficiently
large delimiter, is the most interesting of the auxiliary functions that
currently concern us. Given a pointer |d| to a delimiter field in some noad,
together with a size code |s| and a vertical distance |v|, this function
returns a pointer to a box that contains the smallest variant of |d| whose
height plus depth is |v| or more. (And if no variant is large enough, it
returns the largest available variant.) In particular, this routine will
construct arbitrarily large delimiters from extensible components, if
|d| leads to such characters.

The value returned is a box whose |shift_amount| has been set so that
the box is vertically centered with respect to the axis in the given size.
If a built-up symbol is returned, the height of the box before shifting
will be the height of its topmost component.

@p@t\4@>@<Declare subprocedures for |var_delimiter|@>
function var_delimiter(@!d:pointer;@!s:small_number;@!v:scaled):pointer;
label found,continue;
var b:pointer; {the box that will be constructed}
@!f,@!g: internal_font_number; {best-so-far and tentative font codes}
@!c,@!x,@!y: quarterword; {best-so-far and tentative character codes}
@!m,@!n: integer; {the number of extensible pieces}
@!u: scaled; {height-plus-depth of a tentative character}
@!w: scaled; {largest height-plus-depth so far}
@!q: four_quarters; {character info}
@!hd: eight_bits; {height-depth byte}
@!r: four_quarters; {extensible pieces}
@!z: small_number; {runs through font family members}
@!large_attempt: boolean; {are we trying the ``large'' variant?}
begin f:=null_font; w:=0; large_attempt:=false;
z:=small_fam(d); x:=small_char(d);
loop@+  begin @<Look at the variants of |(z,x)|; set |f| and |c| whenever
    a better character is found; |goto found| as soon as a
    large enough variant is encountered@>;
  if large_attempt then goto found; {there were none large enough}
  large_attempt:=true; z:=large_fam(d); x:=large_char(d);
  end;
found: if f<>null_font then
  @<Make variable |b| point to a box for |(f,c)|@>
else  begin b:=new_null_box;
  width(b):=null_delimiter_space; {use this width if no delimiter was found}
  end;
shift_amount(b):=half(height(b)-depth(b)) - axis_height(s);
var_delimiter:=b;
end;

@ The search process is complicated slightly by the facts that some of the
characters might not be present in some of the fonts, and they might not
be probed in increasing order of height.

@<Look at the variants of |(z,x)|; set |f| and |c|...@>=
if (z<>0)or(x<>min_quarterword) then
  begin z:=z+s+16;
  repeat z:=z-16; g:=fam_fnt(z);
  if g<>null_font then
    @<Look at the list of characters starting with |x| in
      font |g|; set |f| and |c| whenever
      a better character is found; |goto found| as soon as a
      large enough variant is encountered@>;
  until z<16;
  end

@ @<Look at the list of characters starting with |x|...@>=
begin y:=x;
if (qo(y)>=font_bc[g])and(qo(y)<=font_ec[g]) then
  begin continue: q:=char_info(g)(y);
  if char_exists(q) then
    begin if char_tag(q)=ext_tag then
      begin f:=g; c:=y; goto found;
      end;
    hd:=height_depth(q);
    u:=char_height(g)(hd)+char_depth(g)(hd);
    if u>w then
      begin f:=g; c:=y; w:=u;
      if u>=v then goto found;
      end;
    if char_tag(q)=list_tag then
      begin y:=rem_byte(q); goto continue;
      end;
    end;
  end;
end

@ Here is a subroutine that creates a new box, whose list contains a
single character, and whose width includes the italic correction for
that character. The height or depth of the box will be negative, if
the height or depth of the character is negative; thus, this routine
may deliver a slightly different result than |hpack| would produce.

@<Declare subprocedures for |var_delimiter|@>=
function char_box(@!f:internal_font_number;@!c:quarterword):pointer;
var q:four_quarters;
@!hd:eight_bits; {|height_depth| byte}
@!b,@!p:pointer; {the new box and its character node}
begin q:=char_info(f)(c); hd:=height_depth(q);
b:=new_null_box; width(b):=char_width(f)(q)+char_italic(f)(q);
height(b):=char_height(f)(hd); depth(b):=char_depth(f)(hd);
p:=get_avail; character(p):=c; font(p):=f; list_ptr(b):=p; char_box:=b;
end;

@ When the following code is executed, |char_tag(q)| will be equal to
|ext_tag| if and only if a built-up symbol is supposed to be returned.

@<Make variable |b| point to a box for |(f,c)|@>=
if char_tag(q)=ext_tag then
  @<Construct an extensible character in a new box |b|,
    using recipe |rem_byte(q)| and font |f|@>
else b:=char_box(f,c)

@ When we build an extensible character, it's handy to have the
following subroutine, which puts a given character on top
of the characters already in box |b|:

@<Declare subprocedures for |var_delimiter|@>=
procedure stack_into_box(@!b:pointer;@!f:internal_font_number;
  @!c:quarterword);
var p:pointer; {new node placed into |b|}
begin p:=char_box(f,c); link(p):=list_ptr(b); list_ptr(b):=p;
height(b):=height(p);
end;

@ Another handy subroutine computes the height plus depth of
a given character:

@<Declare subprocedures for |var_delimiter|@>=
function height_plus_depth(@!f:internal_font_number;@!c:quarterword):scaled;
var q:four_quarters;
@!hd:eight_bits; {|height_depth| byte}
begin q:=char_info(f)(c); hd:=height_depth(q);
height_plus_depth:=char_height(f)(hd)+char_depth(f)(hd);
end;

@ @<Construct an extensible...@>=
begin b:=new_null_box;
type(b):=vlist_node;
r:=font_info[exten_base[f]+rem_byte(q)].qqqq;@/
@<Compute the minimum suitable height, |w|, and the corresponding
  number of extension steps, |n|; also set |width(b)|@>;
c:=ext_bot(r);
if c<>min_quarterword then stack_into_box(b,f,c);
c:=ext_rep(r);
for m:=1 to n do stack_into_box(b,f,c);
c:=ext_mid(r);
if c<>min_quarterword then
  begin stack_into_box(b,f,c); c:=ext_rep(r);
  for m:=1 to n do stack_into_box(b,f,c);
  end;
c:=ext_top(r);
if c<>min_quarterword then stack_into_box(b,f,c);
depth(b):=w-height(b);
end

@ The width of an extensible character is the width of the repeatable
module. If this module does not have positive height plus depth,
we don't use any copies of it, otherwise we use as few as possible
(in groups of two if there is a middle part).

@<Compute the minimum suitable height, |w|, and...@>=
c:=ext_rep(r); u:=height_plus_depth(f,c);
w:=0; q:=char_info(f)(c); width(b):=char_width(f)(q)+char_italic(f)(q);@/
c:=ext_bot(r);@+if c<>min_quarterword then w:=w+height_plus_depth(f,c);
c:=ext_mid(r);@+if c<>min_quarterword then w:=w+height_plus_depth(f,c);
c:=ext_top(r);@+if c<>min_quarterword then w:=w+height_plus_depth(f,c);
n:=0;
if u>0 then while w<v do
  begin w:=w+u; incr(n);
  if ext_mid(r)<>min_quarterword then w:=w+u;
  end

@ The next subroutine is much simpler; it is used for numerators and
denominators of fractions as well as for displayed operators and
their limits above and below. It takes a given box~|b| and
changes it so that the new box is centered in a box of width~|w|.
The centering is done by putting \.{\\hss} glue at the left and right
of the list inside |b|, then packaging the new box; thus, the
actual box might not really be centered, if it already contains
infinite glue.

The given box might contain a single character whose italic correction
has been added to the width of the box; in this case a compensating
kern is inserted.

@p function rebox(@!b:pointer;@!w:scaled):pointer;
var p:pointer; {temporary register for list manipulation}
@!f:internal_font_number; {font in a one-character box}
@!v:scaled; {width of a character without italic correction}
begin if (width(b)<>w)and(list_ptr(b)<>null) then
  begin if type(b)=vlist_node then b:=hpack(b,natural);
  p:=list_ptr(b);
  if (is_char_node(p))and(link(p)=null) then
    begin f:=font(p); v:=char_width(f)(char_info(f)(character(p)));
    if v<>width(b) then link(p):=new_kern(width(b)-v);
    end;
  free_node(b,box_node_size);
  b:=new_glue(ss_glue); link(b):=p;
  while link(p)<>null do p:=link(p);
  link(p):=new_glue(ss_glue);
  rebox:=hpack(b,w,exactly);
  end
else  begin width(b):=w; rebox:=b;
  end;
end;

@ Here is a subroutine that creates a new glue specification from another
one that is expressed in `\.{mu}', given the value of the math unit.

@d mu_mult(#)==nx_plus_y(n,#,xn_over_d(#,f,@'200000))

@p function math_glue(@!g:pointer;@!m:scaled):pointer;
var p:pointer; {the new glue specification}
@!n:integer; {integer part of |m|}
@!f:scaled; {fraction part of |m|}
begin n:=x_over_n(m,@'200000); f:=remainder;@/
if f<0 then
  begin decr(n); f:=f+@'200000;
  end;
p:=get_node(glue_spec_size);
width(p):=mu_mult(width(g)); {convert \.{mu} to \.{pt}}
stretch_order(p):=stretch_order(g);
if stretch_order(p)=normal then stretch(p):=mu_mult(stretch(g))
else stretch(p):=stretch(g);
shrink_order(p):=shrink_order(g);
if shrink_order(p)=normal then shrink(p):=mu_mult(shrink(g))
else shrink(p):=shrink(g);
math_glue:=p;
end;

@ The |math_kern| subroutine removes |mu_glue| from a kern node, given
the value of the math unit.

@p procedure math_kern(@!p:pointer;@!m:scaled);
var @!n:integer; {integer part of |m|}
@!f:scaled; {fraction part of |m|}
begin if subtype(p)=mu_glue then
  begin n:=x_over_n(m,@'200000); f:=remainder;@/
  if f<0 then
    begin decr(n); f:=f+@'200000;
    end;
  width(p):=mu_mult(width(p)); subtype(p):=explicit;
  end;
end;

@ Sometimes it is necessary to destroy an mlist. The following
subroutine empties the current list, assuming that |abs(mode)=mmode|.

@p procedure flush_math;
begin flush_node_list(link(head)); flush_node_list(incompleat_noad);
link(head):=null; tail:=head; incompleat_noad:=null;
end;

@* \[36] Typesetting math formulas.
\TeX's most important routine for dealing with formulas is called
|mlist_to_hlist|.  After a formula has been scanned and represented as an
mlist, this routine converts it to an hlist that can be placed into a box
or incorporated into the text of a paragraph. There are three implicit
parameters, passed in global variables: |cur_mlist| points to the first
node or noad in the given mlist (and it might be |null|); |cur_style| is a
style code; and |mlist_penalties| is |true| if penalty nodes for potential
line breaks are to be inserted into the resulting hlist. After
|mlist_to_hlist| has acted, |link(temp_head)| points to the translated hlist.

Since mlists can be inside mlists, the procedure is recursive. And since this
is not part of \TeX's inner loop, the program has been written in a manner
that stresses compactness over efficiency.
@^recursion@>

@<Glob...@>=
@!cur_mlist:pointer; {beginning of mlist to be translated}
@!cur_style:small_number; {style code at current place in the list}
@!cur_size:small_number; {size code corresponding to |cur_style|}
@!cur_mu:scaled; {the math unit width corresponding to |cur_size|}
@!mlist_penalties:boolean; {should |mlist_to_hlist| insert penalties?}

@ The recursion in |mlist_to_hlist| is due primarily to a subroutine
called |clean_box| that puts a given noad field into a box using a given
math style; |mlist_to_hlist| can call |clean_box|, which can call
|mlist_to_hlist|.
@^recursion@>

The box returned by |clean_box| is ``clean'' in the
sense that its |shift_amount| is zero.

@p procedure@?mlist_to_hlist; forward;@t\2@>@/
function clean_box(@!p:pointer;@!s:small_number):pointer;
label found;
var q:pointer; {beginning of a list to be boxed}
@!save_style:small_number; {|cur_style| to be restored}
@!x:pointer; {box to be returned}
@!r:pointer; {temporary pointer}
begin case math_type(p) of
math_char: begin cur_mlist:=new_noad; mem[nucleus(cur_mlist)]:=mem[p];
  end;
sub_box: begin q:=info(p); goto found;
  end;
sub_mlist: cur_mlist:=info(p);
othercases begin q:=new_null_box; goto found;
  end
endcases;@/
save_style:=cur_style; cur_style:=s; mlist_penalties:=false;@/
mlist_to_hlist; q:=link(temp_head); {recursive call}
cur_style:=save_style; {restore the style}
@<Set up the values of |cur_size| and |cur_mu|, based on |cur_style|@>;
found: if is_char_node(q)or(q=null) then x:=hpack(q,natural)
  else if (link(q)=null)and(type(q)<=vlist_node)and(shift_amount(q)=0) then
    x:=q {it's already clean}
  else x:=hpack(q,natural);
@<Simplify a trivial box@>;
clean_box:=x;
end;

@ Here we save memory space in a common case.

@<Simplify a trivial box@>=
q:=list_ptr(x);
if is_char_node(q) then
  begin r:=link(q);
  if r<>null then if link(r)=null then if not is_char_node(r) then
   if type(r)=kern_node then {unneeded italic correction}
    begin free_node(r,small_node_size); link(q):=null;
    end;
  end

@ It is convenient to have a procedure that converts a |math_char|
field to an ``unpacked'' form. The |fetch| routine sets |cur_f|, |cur_c|,
and |cur_i| to the font code, character code, and character information bytes of
a given noad field. It also takes care of issuing error messages for
nonexistent characters; in such cases, |char_exists(cur_i)| will be |false|
after |fetch| has acted, and the field will also have been reset to |empty|.

@p procedure fetch(@!a:pointer); {unpack the |math_char| field |a|}
begin cur_c:=character(a); cur_f:=fam_fnt(fam(a)+cur_size);
if cur_f=null_font then
  @<Complain about an undefined family and set |cur_i| null@>
else  begin if (qo(cur_c)>=font_bc[cur_f])and(qo(cur_c)<=font_ec[cur_f]) then
    cur_i:=char_info(cur_f)(cur_c)
  else cur_i:=null_character;
  if not(char_exists(cur_i)) then
    begin char_warning(cur_f,qo(cur_c));
    math_type(a):=empty;
    end;
  end;
end;

@ @<Complain about an undefined family...@>=
begin print_err(""); print_size(cur_size); print_char(" ");
print_int(fam(a)); print(" is undefined (character ");
print_ASCII(qo(cur_c)); print_char(")");
help4("Somewhere in the math formula just ended, you used the")@/
("stated character from an undefined font family. For example,")@/
("plain TeX doesn't allow \it or \sl in subscripts. Proceed,")@/
("and I'll try to forget that I needed that character.");
error; cur_i:=null_character; math_type(a):=empty;
end

@ The outputs of |fetch| are placed in global variables.

@<Glob...@>=
@!cur_f:internal_font_number; {the |font| field of a |math_char|}
@!cur_c:quarterword; {the |character| field of a |math_char|}
@!cur_i:four_quarters; {the |char_info| of a |math_char|,
  or a lig/kern instruction}

@ We need to do a lot of different things, so |mlist_to_hlist| makes two
passes over the given mlist.

The first pass does most of the processing: It removes ``mu'' spacing from
glue, it recursively evaluates all subsidiary mlists so that only the
top-level mlist remains to be handled, it puts fractions and square roots
and such things into boxes, it attaches subscripts and superscripts, and
it computes the overall height and depth of the top-level mlist so that
the size of delimiters for a |left_noad| and a |right_noad| will be known.
The hlist resulting from each noad is recorded in that noad's |new_hlist|
field, an integer field that replaces the |nucleus| or |thickness|.
@^recursion@>

The second pass eliminates all noads and inserts the correct glue and
penalties between nodes.

@d new_hlist(#)==mem[nucleus(#)].int {the translation of an mlist}

@ Here is the overall plan of |mlist_to_hlist|, and the list of its
local variables.

@d done_with_noad=80 {go here when a noad has been fully translated}
@d done_with_node=81 {go here when a node has been fully converted}
@d check_dimensions=82 {go here to update |max_h| and |max_d|}
@d delete_q=83 {go here to delete |q| and move to the next node}

@p@t\4@>@<Declare math construction procedures@>
procedure mlist_to_hlist;
label reswitch, check_dimensions, done_with_noad, done_with_node, delete_q,
  done;
var mlist:pointer; {beginning of the given list}
@!penalties:boolean; {should penalty nodes be inserted?}
@!style:small_number; {the given style}
@!save_style:small_number; {holds |cur_style| during recursion}
@!q:pointer; {runs through the mlist}
@!r:pointer; {the most recent noad preceding |q|}
@!r_type:small_number; {the |type| of noad |r|, or |op_noad| if |r=null|}
@!t:small_number; {the effective |type| of noad |q| during the second pass}
@!p,@!x,@!y,@!z: pointer; {temporary registers for list construction}
@!pen:integer; {a penalty to be inserted}
@!s:small_number; {the size of a noad to be deleted}
@!max_h,@!max_d:scaled; {maximum height and depth of the list translated so far}
@!delta:scaled; {offset between subscript and superscript}
begin mlist:=cur_mlist; penalties:=mlist_penalties;
style:=cur_style; {tuck global parameters away as local variables}
q:=mlist; r:=null; r_type:=op_noad; max_h:=0; max_d:=0;
@<Set up the values of |cur_size| and |cur_mu|, based on |cur_style|@>;
while q<>null do @<Process node-or-noad |q| as much as possible in preparation
    for the second pass of |mlist_to_hlist|, then move to the next
    item in the mlist@>;
@<Convert \(a)a final |bin_noad| to an |ord_noad|@>;
@<Make a second pass over the mlist, removing all noads and inserting the
  proper spacing and penalties@>;
end;

@ We use the fact that no character nodes appear in an mlist, hence
the field |type(q)| is always present.

@<Process node-or-noad...@>=
begin @<Do first-pass processing based on |type(q)|; |goto done_with_noad|
  if a noad has been fully processed, |goto check_dimensions| if it
  has been translated into |new_hlist(q)|, or |goto done_with_node|
  if a node has been fully processed@>;
check_dimensions: z:=hpack(new_hlist(q),natural);
if height(z)>max_h then max_h:=height(z);
if depth(z)>max_d then max_d:=depth(z);
free_node(z,box_node_size);
done_with_noad: r:=q; r_type:=type(r);
done_with_node: q:=link(q);
end

@ One of the things we must do on the first pass is change a |bin_noad| to
an |ord_noad| if the |bin_noad| is not in the context of a binary operator.
The values of |r| and |r_type| make this fairly easy.

@<Do first-pass processing...@>=
reswitch: delta:=0;
case type(q) of
bin_noad: case r_type of
  bin_noad,op_noad,rel_noad,open_noad,punct_noad,left_noad:
    begin type(q):=ord_noad; goto reswitch;
    end;
  othercases do_nothing
  endcases;
rel_noad,close_noad,punct_noad,right_noad: begin@t@>@;@/
  @<Convert \(a)a final |bin_noad| to an |ord_noad|@>;
  if type(q)=right_noad then goto done_with_noad;
  end;
@t\4@>@<Cases for noads that can follow a |bin_noad|@>@;
@t\4@>@<Cases for nodes that can appear in an mlist, after which we
  |goto done_with_node|@>@;
othercases confusion("mlist1")
@:this can't happen mlist1}{\quad mlist1@>
endcases;@/
@<Convert \(n)|nucleus(q)| to an hlist and attach the sub/superscripts@>

@ @<Convert \(a)a final |bin_noad| to an |ord_noad|@>=
if r_type=bin_noad then type(r):=ord_noad

@ @<Cases for nodes that can appear in an mlist...@>=
style_node: begin cur_style:=subtype(q);
  @<Set up the values of |cur_size| and |cur_mu|, based on |cur_style|@>;
  goto done_with_node;
  end;
choice_node: @<Change this node to a style node followed by the correct choice,
   then |goto done_with_node|@>;
ins_node,mark_node,adjust_node,
  whatsit_node,penalty_node,disc_node: goto done_with_node;
rule_node: begin if height(q)>max_h then max_h:=height(q);
  if depth(q)>max_d then max_d:=depth(q); goto done_with_node;
  end;
glue_node: begin @<Convert \(m)math glue to ordinary glue@>;
  goto done_with_node;
  end;
kern_node: begin math_kern(q,cur_mu); goto done_with_node;
  end;

@ @d choose_mlist(#)==begin p:=#(q); #(q):=null;@+end

@<Change this node to a style node...@>=
begin case cur_style div 2 of
0: choose_mlist(display_mlist); {|display_style=0|}
1: choose_mlist(text_mlist); {|text_style=2|}
2: choose_mlist(script_mlist); {|script_style=4|}
3: choose_mlist(script_script_mlist); {|script_script_style=6|}
end; {there are no other cases}
flush_node_list(display_mlist(q));
flush_node_list(text_mlist(q));
flush_node_list(script_mlist(q));
flush_node_list(script_script_mlist(q));@/
type(q):=style_node; subtype(q):=cur_style; width(q):=0; depth(q):=0;
if p<>null then
  begin z:=link(q); link(q):=p;
  while link(p)<>null do p:=link(p);
  link(p):=z;
  end;
goto done_with_node;
end

@ Conditional math glue (`\.{\\nonscript}') results in a |glue_node|
pointing to |zero_glue|, with |subtype(q)=cond_math_glue|; in such a case
the node following will be eliminated if it is a glue or kern node and if the
current size is different from |text_size|. Unconditional math glue
(`\.{\\muskip}') is converted to normal glue by multiplying the dimensions
by |cur_mu|.
@!@:non_script_}{\.{\\nonscript} primitive@>

@<Convert \(m)math glue to ordinary glue@>=
if subtype(q)=mu_glue then
  begin x:=glue_ptr(q);
  y:=math_glue(x,cur_mu); delete_glue_ref(x); glue_ptr(q):=y;
  subtype(q):=normal;
  end
else if (cur_size<>text_size)and(subtype(q)=cond_math_glue) then
  begin p:=link(q);
  if p<>null then if (type(p)=glue_node)or(type(p)=kern_node) then
      begin link(q):=link(p); link(p):=null; flush_node_list(p);
      end;
  end

@ @<Cases for noads that can follow a |bin_noad|@>=
left_noad: goto done_with_noad;
fraction_noad: begin make_fraction(q); goto check_dimensions;
  end;
op_noad: begin delta:=make_op(q);
  if subtype(q)=limits then goto check_dimensions;
  end;
ord_noad: make_ord(q);
open_noad,inner_noad: do_nothing;
radical_noad: make_radical(q);
over_noad: make_over(q);
under_noad: make_under(q);
accent_noad: make_math_accent(q);
vcenter_noad: make_vcenter(q);

@ Most of the actual construction work of |mlist_to_hlist| is done
by procedures with names
like |make_fraction|, |make_radical|, etc. To illustrate
the general setup of such procedures, let's begin with a couple of
simple ones.

@<Declare math...@>=
procedure make_over(@!q:pointer);
begin info(nucleus(q)):=@|
  overbar(clean_box(nucleus(q),cramped_style(cur_style)),@|
  3*default_rule_thickness,default_rule_thickness);
math_type(nucleus(q)):=sub_box;
end;

@ @<Declare math...@>=
procedure make_under(@!q:pointer);
var p,@!x,@!y: pointer; {temporary registers for box construction}
@!delta:scaled; {overall height plus depth}
begin x:=clean_box(nucleus(q),cur_style);
p:=new_kern(3*default_rule_thickness); link(x):=p;
link(p):=fraction_rule(default_rule_thickness);
y:=vpack(x,natural);
delta:=height(y)+depth(y)+default_rule_thickness;
height(y):=height(x); depth(y):=delta-height(y);
info(nucleus(q)):=y; math_type(nucleus(q)):=sub_box;
end;

@ @<Declare math...@>=
procedure make_vcenter(@!q:pointer);
var v:pointer; {the box that should be centered vertically}
@!delta:scaled; {its height plus depth}
begin v:=info(nucleus(q));
if type(v)<>vlist_node then confusion("vcenter");
@:this can't happen vcenter}{\quad vcenter@>
delta:=height(v)+depth(v);
height(v):=axis_height(cur_size)+half(delta);
depth(v):=delta-height(v);
end;

@ According to the rules in the \.{DVI} file specifications, we ensure alignment
@^square roots@>
between a square root sign and the rule above its nucleus by assuming that the
baseline of the square-root symbol is the same as the bottom of the rule. The
height of the square-root symbol will be the thickness of the rule, and the
depth of the square-root symbol should exceed or equal the height-plus-depth
of the nucleus plus a certain minimum clearance~|clr|. The symbol will be
placed so that the actual clearance is |clr| plus half the excess.

@<Declare math...@>=
procedure make_radical(@!q:pointer);
var x,@!y:pointer; {temporary registers for box construction}
@!delta,@!clr:scaled; {dimensions involved in the calculation}
begin x:=clean_box(nucleus(q),cramped_style(cur_style));
if cur_style<text_style then {display style}
  clr:=default_rule_thickness+(abs(math_x_height(cur_size)) div 4)
else  begin clr:=default_rule_thickness; clr:=clr + (abs(clr) div 4);
  end;
y:=var_delimiter(left_delimiter(q),cur_size,height(x)+depth(x)+clr+
  default_rule_thickness);
delta:=depth(y)-(height(x)+depth(x)+clr);
if delta>0 then clr:=clr+half(delta); {increase the actual clearance}
shift_amount(y):=-(height(x)+clr);
link(y):=overbar(x,clr,height(y));
info(nucleus(q)):=hpack(y,natural); math_type(nucleus(q)):=sub_box;
end;

@ Slants are not considered when placing accents in math mode. The accenter is
centered over the accentee, and the accent width is treated as zero with
respect to the size of the final box.

@<Declare math...@>=
procedure make_math_accent(@!q:pointer);
label done,done1;
var p,@!x,@!y:pointer; {temporary registers for box construction}
@!a:integer; {address of lig/kern instruction}
@!c:quarterword; {accent character}
@!f:internal_font_number; {its font}
@!i:four_quarters; {its |char_info|}
@!s:scaled; {amount to skew the accent to the right}
@!h:scaled; {height of character being accented}
@!delta:scaled; {space to remove between accent and accentee}
@!w:scaled; {width of the accentee, not including sub/superscripts}
begin fetch(accent_chr(q));
if char_exists(cur_i) then
  begin i:=cur_i; c:=cur_c; f:=cur_f;@/
  @<Compute the amount of skew@>;
  x:=clean_box(nucleus(q),cramped_style(cur_style)); w:=width(x); h:=height(x);
  @<Switch to a larger accent if available and appropriate@>;
  if h<x_height(f) then delta:=h@+else delta:=x_height(f);
  if (math_type(supscr(q))<>empty)or(math_type(subscr(q))<>empty) then
    if math_type(nucleus(q))=math_char then
      @<Swap the subscript and superscript into box |x|@>;
  y:=char_box(f,c);
  shift_amount(y):=s+half(w-width(y));
  width(y):=0; p:=new_kern(-delta); link(p):=x; link(y):=p;
  y:=vpack(y,natural); width(y):=width(x);
  if height(y)<h then @<Make the height of box |y| equal to |h|@>;
  info(nucleus(q)):=y;
  math_type(nucleus(q)):=sub_box;
  end;
end;

@ @<Make the height of box |y|...@>=
begin p:=new_kern(h-height(y)); link(p):=list_ptr(y); list_ptr(y):=p;
height(y):=h;
end

@ @<Switch to a larger accent if available and appropriate@>=
loop@+  begin if char_tag(i)<>list_tag then goto done;
  y:=rem_byte(i);
  i:=char_info(f)(y);
  if not char_exists(i) then goto done;
  if char_width(f)(i)>w then goto done;
  c:=y;
  end;
done:

@ @<Compute the amount of skew@>=
s:=0;
if math_type(nucleus(q))=math_char then
  begin fetch(nucleus(q));
  if char_tag(cur_i)=lig_tag then
    begin a:=lig_kern_start(cur_f)(cur_i);
    cur_i:=font_info[a].qqqq;
    if skip_byte(cur_i)>stop_flag then
      begin a:=lig_kern_restart(cur_f)(cur_i);
      cur_i:=font_info[a].qqqq;
      end;
    loop@+ begin if qo(next_char(cur_i))=skew_char[cur_f] then
        begin if op_byte(cur_i)>=kern_flag then
          if skip_byte(cur_i)<=stop_flag then s:=char_kern(cur_f)(cur_i);
        goto done1;
        end;
      if skip_byte(cur_i)>=stop_flag then goto done1;
      a:=a+qo(skip_byte(cur_i))+1;
      cur_i:=font_info[a].qqqq;
      end;
    end;
  end;
done1:

@ @<Swap the subscript and superscript into box |x|@>=
begin flush_node_list(x); x:=new_noad;
mem[nucleus(x)]:=mem[nucleus(q)];
mem[supscr(x)]:=mem[supscr(q)];
mem[subscr(x)]:=mem[subscr(q)];@/
mem[supscr(q)].hh:=empty_field;
mem[subscr(q)].hh:=empty_field;@/
math_type(nucleus(q)):=sub_mlist; info(nucleus(q)):=x;
x:=clean_box(nucleus(q),cur_style); delta:=delta+height(x)-h; h:=height(x);
end

@ The |make_fraction| procedure is a bit different because it sets
|new_hlist(q)| directly rather than making a sub-box.

@<Declare math...@>=
procedure make_fraction(@!q:pointer);
var p,@!v,@!x,@!y,@!z:pointer; {temporary registers for box construction}
@!delta,@!delta1,@!delta2,@!shift_up,@!shift_down,@!clr:scaled;
  {dimensions for box calculations}
begin if thickness(q)=default_code then thickness(q):=default_rule_thickness;
@<Create equal-width boxes |x| and |z| for the numerator and denominator,
  and compute the default amounts |shift_up| and |shift_down| by which they
  are displaced from the baseline@>;
if thickness(q)=0 then @<Adjust \(s)|shift_up| and |shift_down| for the case
  of no fraction line@>
else @<Adjust \(s)|shift_up| and |shift_down| for the case of a fraction line@>;
@<Construct a vlist box for the fraction, according to |shift_up| and
  |shift_down|@>;
@<Put the \(f)fraction into a box with its delimiters, and make |new_hlist(q)|
  point to it@>;
end;

@ @<Create equal-width boxes |x| and |z| for the numerator and denom...@>=
x:=clean_box(numerator(q),num_style(cur_style));
z:=clean_box(denominator(q),denom_style(cur_style));
if width(x)<width(z) then x:=rebox(x,width(z))
else z:=rebox(z,width(x));
if cur_style<text_style then {display style}
  begin shift_up:=num1(cur_size); shift_down:=denom1(cur_size);
  end
else  begin shift_down:=denom2(cur_size);
  if thickness(q)<>0 then shift_up:=num2(cur_size)
  else shift_up:=num3(cur_size);
  end

@ The numerator and denominator must be separated by a certain minimum
clearance, called |clr| in the following program. The difference between
|clr| and the actual clearance is |2delta|.

@<Adjust \(s)|shift_up| and |shift_down| for the case of no fraction line@>=
begin if cur_style<text_style then clr:=7*default_rule_thickness
else clr:=3*default_rule_thickness;
delta:=half(clr-((shift_up-depth(x))-(height(z)-shift_down)));
if delta>0 then
  begin shift_up:=shift_up+delta;
  shift_down:=shift_down+delta;
  end;
end

@ In the case of a fraction line, the minimum clearance depends on the actual
thickness of the line.

@<Adjust \(s)|shift_up| and |shift_down| for the case of a fraction line@>=
begin if cur_style<text_style then clr:=3*thickness(q)
else clr:=thickness(q);
delta:=half(thickness(q));
delta1:=clr-((shift_up-depth(x))-(axis_height(cur_size)+delta));
delta2:=clr-((axis_height(cur_size)-delta)-(height(z)-shift_down));
if delta1>0 then shift_up:=shift_up+delta1;
if delta2>0 then shift_down:=shift_down+delta2;
end

@ @<Construct a vlist box for the fraction...@>=
v:=new_null_box; type(v):=vlist_node;
height(v):=shift_up+height(x); depth(v):=depth(z)+shift_down;
width(v):=width(x); {this also equals |width(z)|}
if thickness(q)=0 then
  begin p:=new_kern((shift_up-depth(x))-(height(z)-shift_down));
  link(p):=z;
  end
else  begin y:=fraction_rule(thickness(q));@/
  p:=new_kern((axis_height(cur_size)-delta)-@|(height(z)-shift_down));@/
  link(y):=p; link(p):=z;@/
  p:=new_kern((shift_up-depth(x))-(axis_height(cur_size)+delta));
  link(p):=y;
  end;
link(x):=p; list_ptr(v):=x

@ @<Put the \(f)fraction into a box with its delimiters...@>=
if cur_style<text_style then delta:=delim1(cur_size)
else delta:=delim2(cur_size);
x:=var_delimiter(left_delimiter(q), cur_size, delta); link(x):=v;@/
z:=var_delimiter(right_delimiter(q), cur_size, delta); link(v):=z;@/
new_hlist(q):=hpack(x,natural)

@ If the nucleus of an |op_noad| is a single character, it is to be
centered vertically with respect to the axis, after first being enlarged
(via a character list in the font) if we are in display style.  The normal
convention for placing displayed limits is to put them above and below the
operator in display style.

The italic correction is removed from the character if there is a subscript
and the limits are not being displayed. The |make_op|
routine returns the value that should be used as an offset between
subscript and superscript.

After |make_op| has acted, |subtype(q)| will be |limits| if and only if
the limits have been set above and below the operator. In that case,
|new_hlist(q)| will already contain the desired final box.

@<Declare math...@>=
function make_op(@!q:pointer):scaled;
var delta:scaled; {offset between subscript and superscript}
@!p,@!v,@!x,@!y,@!z:pointer; {temporary registers for box construction}
@!c:quarterword;@+@!i:four_quarters; {registers for character examination}
@!shift_up,@!shift_down:scaled; {dimensions for box calculation}
begin if (subtype(q)=normal)and(cur_style<text_style) then
  subtype(q):=limits;
if math_type(nucleus(q))=math_char then
  begin fetch(nucleus(q));
  if (cur_style<text_style)and(char_tag(cur_i)=list_tag) then {make it larger}
    begin c:=rem_byte(cur_i); i:=char_info(cur_f)(c);
    if char_exists(i) then
      begin cur_c:=c; cur_i:=i; character(nucleus(q)):=c;
      end;
    end;
  delta:=char_italic(cur_f)(cur_i); x:=clean_box(nucleus(q),cur_style);
  if (math_type(subscr(q))<>empty)and(subtype(q)<>limits) then
    width(x):=width(x)-delta; {remove italic correction}
  shift_amount(x):=half(height(x)-depth(x)) - axis_height(cur_size);
    {center vertically}
  math_type(nucleus(q)):=sub_box; info(nucleus(q)):=x;
  end
else delta:=0;
if subtype(q)=limits then
  @<Construct a box with limits above and below it, skewed by |delta|@>;
make_op:=delta;
end;

@ The following program builds a vlist box |v| for displayed limits. The
width of the box is not affected by the fact that the limits may be skewed.

@<Construct a box with limits above and below it...@>=
begin x:=clean_box(supscr(q),sup_style(cur_style));
y:=clean_box(nucleus(q),cur_style);
z:=clean_box(subscr(q),sub_style(cur_style));
v:=new_null_box; type(v):=vlist_node; width(v):=width(y);
if width(x)>width(v) then width(v):=width(x);
if width(z)>width(v) then width(v):=width(z);
x:=rebox(x,width(v)); y:=rebox(y,width(v)); z:=rebox(z,width(v));@/
shift_amount(x):=half(delta); shift_amount(z):=-shift_amount(x);
height(v):=height(y); depth(v):=depth(y);
@<Attach the limits to |y| and adjust |height(v)|, |depth(v)| to
  account for their presence@>;
new_hlist(q):=v;
end

@ We use |shift_up| and |shift_down| in the following program for the
amount of glue between the displayed operator |y| and its limits |x| and
|z|. The vlist inside box |v| will consist of |x| followed by |y| followed
by |z|, with kern nodes for the spaces between and around them.

@<Attach the limits to |y| and adjust |height(v)|, |depth(v)|...@>=
if math_type(supscr(q))=empty then
  begin free_node(x,box_node_size); list_ptr(v):=y;
  end
else  begin shift_up:=big_op_spacing3-depth(x);
  if shift_up<big_op_spacing1 then shift_up:=big_op_spacing1;
  p:=new_kern(shift_up); link(p):=y; link(x):=p;@/
  p:=new_kern(big_op_spacing5); link(p):=x; list_ptr(v):=p;
  height(v):=height(v)+big_op_spacing5+height(x)+depth(x)+shift_up;
  end;
if math_type(subscr(q))=empty then free_node(z,box_node_size)
else  begin shift_down:=big_op_spacing4-height(z);
  if shift_down<big_op_spacing2 then shift_down:=big_op_spacing2;
  p:=new_kern(shift_down); link(y):=p; link(p):=z;@/
  p:=new_kern(big_op_spacing5); link(z):=p;
  depth(v):=depth(v)+big_op_spacing5+height(z)+depth(z)+shift_down;
  end

@ A ligature found in a math formula does not create a |ligature_node|, because
there is no question of hyphenation afterwards; the ligature will simply be
stored in an ordinary |char_node|, after residing in an |ord_noad|.

The |math_type| is converted to |math_text_char| here if we would not want to
apply an italic correction to the current character unless it belongs
to a math font (i.e., a font with |space=0|).

No boundary characters enter into these ligatures.

@<Declare math...@>=
procedure make_ord(@!q:pointer);
label restart,exit;
var a:integer; {address of lig/kern instruction}
@!p,@!r:pointer; {temporary registers for list manipulation}
begin restart:@t@>@;@/
if math_type(subscr(q))=empty then if math_type(supscr(q))=empty then
 if math_type(nucleus(q))=math_char then
  begin p:=link(q);
  if p<>null then if (type(p)>=ord_noad)and(type(p)<=punct_noad) then
    if math_type(nucleus(p))=math_char then
    if fam(nucleus(p))=fam(nucleus(q)) then
      begin math_type(nucleus(q)):=math_text_char;
      fetch(nucleus(q));
      if char_tag(cur_i)=lig_tag then
        begin a:=lig_kern_start(cur_f)(cur_i);
        cur_c:=character(nucleus(p));
        cur_i:=font_info[a].qqqq;
        if skip_byte(cur_i)>stop_flag then
          begin a:=lig_kern_restart(cur_f)(cur_i);
          cur_i:=font_info[a].qqqq;
          end;
        loop@+ begin @<If instruction |cur_i| is a kern with |cur_c|, attach
            the kern after~|q|; or if it is a ligature with |cur_c|, combine
            noads |q| and~|p| appropriately; then |return| if the cursor has
            moved past a noad, or |goto restart|@>;
          if skip_byte(cur_i)>=stop_flag then return;
          a:=a+qo(skip_byte(cur_i))+1;
          cur_i:=font_info[a].qqqq;
          end;
        end;
      end;
  end;
exit:end;

@ Note that a ligature between an |ord_noad| and another kind of noad
is replaced by an |ord_noad|, when the two noads collapse into one.
But we could make a parenthesis (say) change shape when it follows
certain letters. Presumably a font designer will define such
ligatures only when this convention makes sense.

\chardef\?='174 % vertical line to indicate character retention

@<If instruction |cur_i| is a kern with |cur_c|, ...@>=
if next_char(cur_i)=cur_c then if skip_byte(cur_i)<=stop_flag then
  if op_byte(cur_i)>=kern_flag then
    begin p:=new_kern(char_kern(cur_f)(cur_i));
    link(p):=link(q); link(q):=p; return;
    end
  else  begin check_interrupt; {allow a way out of infinite ligature loop}
    case op_byte(cur_i) of
  qi(1),qi(5): character(nucleus(q)):=rem_byte(cur_i); {\.{=:\?}, \.{=:\?>}}
  qi(2),qi(6): character(nucleus(p)):=rem_byte(cur_i); {\.{\?=:}, \.{\?=:>}}
  qi(3),qi(7),qi(11):begin r:=new_noad; {\.{\?=:\?}, \.{\?=:\?>}, \.{\?=:\?>>}}
      character(nucleus(r)):=rem_byte(cur_i);
      fam(nucleus(r)):=fam(nucleus(q));@/
      link(q):=r; link(r):=p;
      if op_byte(cur_i)<qi(11) then math_type(nucleus(r)):=math_char
      else math_type(nucleus(r)):=math_text_char; {prevent combination}
      end;
    othercases begin link(q):=link(p);
      character(nucleus(q)):=rem_byte(cur_i); {\.{=:}}
      mem[subscr(q)]:=mem[subscr(p)]; mem[supscr(q)]:=mem[supscr(p)];@/
      free_node(p,noad_size);
      end
    endcases;
    if op_byte(cur_i)>qi(3) then return;
    math_type(nucleus(q)):=math_char; goto restart;
    end

@ When we get to the following part of the program, we have ``fallen through''
from cases that did not lead to |check_dimensions| or |done_with_noad| or
|done_with_node|. Thus, |q|~points to a noad whose nucleus may need to be
converted to an hlist, and whose subscripts and superscripts need to be
appended if they are present.

If |nucleus(q)| is not a |math_char|, the variable |delta| is the amount
by which a superscript should be moved right with respect to a subscript
when both are present.
@^subscripts@>
@^superscripts@>

@<Convert \(n)|nucleus(q)| to an hlist and attach the sub/superscripts@>=
case math_type(nucleus(q)) of
math_char, math_text_char:
  @<Create a character node |p| for |nucleus(q)|, possibly followed
  by a kern node for the italic correction, and set |delta| to the
  italic correction if a subscript is present@>;
empty: p:=null;
sub_box: p:=info(nucleus(q));
sub_mlist: begin cur_mlist:=info(nucleus(q)); save_style:=cur_style;
  mlist_penalties:=false; mlist_to_hlist; {recursive call}
@^recursion@>
  cur_style:=save_style; @<Set up the values...@>;
  p:=hpack(link(temp_head),natural);
  end;
othercases confusion("mlist2")
@:this can't happen mlist2}{\quad mlist2@>
endcases;@/
new_hlist(q):=p;
if (math_type(subscr(q))=empty)and(math_type(supscr(q))=empty) then
  goto check_dimensions;
make_scripts(q,delta)

@ @<Create a character node |p| for |nucleus(q)|...@>=
begin fetch(nucleus(q));
if char_exists(cur_i) then
  begin delta:=char_italic(cur_f)(cur_i); p:=new_character(cur_f,qo(cur_c));
  if (math_type(nucleus(q))=math_text_char)and(space(cur_f)<>0) then
    delta:=0; {no italic correction in mid-word of text font}
  if (math_type(subscr(q))=empty)and(delta<>0) then
    begin link(p):=new_kern(delta); delta:=0;
    end;
  end
else p:=null;
end

@ The purpose of |make_scripts(q,delta)| is to attach the subscript and/or
superscript of noad |q| to the list that starts at |new_hlist(q)|,
given that subscript and superscript aren't both empty. The superscript
will appear to the right of the subscript by a given distance |delta|.

We set |shift_down| and |shift_up| to the minimum amounts to shift the
baseline of subscripts and superscripts based on the given nucleus.

@<Declare math...@>=
procedure make_scripts(@!q:pointer;@!delta:scaled);
var p,@!x,@!y,@!z:pointer; {temporary registers for box construction}
@!shift_up,@!shift_down,@!clr:scaled; {dimensions in the calculation}
@!t:small_number; {subsidiary size code}
begin p:=new_hlist(q);
if is_char_node(p) then
  begin shift_up:=0; shift_down:=0;
  end
else  begin z:=hpack(p,natural);
  if cur_style<script_style then t:=script_size@+else t:=script_script_size;
  shift_up:=height(z)-sup_drop(t);
  shift_down:=depth(z)+sub_drop(t);
  free_node(z,box_node_size);
  end;
if math_type(supscr(q))=empty then
  @<Construct a subscript box |x| when there is no superscript@>
else  begin @<Construct a superscript box |x|@>;
  if math_type(subscr(q))=empty then shift_amount(x):=-shift_up
  else @<Construct a sub/superscript combination box |x|, with the
    superscript offset by |delta|@>;
  end;
if new_hlist(q)=null then new_hlist(q):=x
else  begin p:=new_hlist(q);
  while link(p)<>null do p:=link(p);
  link(p):=x;
  end;
end;

@ When there is a subscript without a superscript, the top of the subscript
should not exceed the baseline plus four-fifths of the x-height.

@<Construct a subscript box |x| when there is no superscript@>=
begin x:=clean_box(subscr(q),sub_style(cur_style));
width(x):=width(x)+script_space;
if shift_down<sub1(cur_size) then shift_down:=sub1(cur_size);
clr:=height(x)-(abs(math_x_height(cur_size)*4) div 5);
if shift_down<clr then shift_down:=clr;
shift_amount(x):=shift_down;
end

@ The bottom of a superscript should never descend below the baseline plus
one-fourth of the x-height.

@<Construct a superscript box |x|@>=
begin x:=clean_box(supscr(q),sup_style(cur_style));
width(x):=width(x)+script_space;
if odd(cur_style) then clr:=sup3(cur_size)
else if cur_style<text_style then clr:=sup1(cur_size)
else clr:=sup2(cur_size);
if shift_up<clr then shift_up:=clr;
clr:=depth(x)+(abs(math_x_height(cur_size)) div 4);
if shift_up<clr then shift_up:=clr;
end

@ When both subscript and superscript are present, the subscript must be
separated from the superscript by at least four times |default_rule_thickness|.
If this condition would be violated, the subscript moves down, after which
both subscript and superscript move up so that the bottom of the superscript
is at least as high as the baseline plus four-fifths of the x-height.

@<Construct a sub/superscript combination box |x|...@>=
begin y:=clean_box(subscr(q),sub_style(cur_style));
width(y):=width(y)+script_space;
if shift_down<sub2(cur_size) then shift_down:=sub2(cur_size);
clr:=4*default_rule_thickness-
  ((shift_up-depth(x))-(height(y)-shift_down));
if clr>0 then
  begin shift_down:=shift_down+clr;
  clr:=(abs(math_x_height(cur_size)*4) div 5)-(shift_up-depth(x));
  if clr>0 then
    begin shift_up:=shift_up+clr;
    shift_down:=shift_down-clr;
    end;
  end;
shift_amount(x):=delta; {superscript is |delta| to the right of the subscript}
p:=new_kern((shift_up-depth(x))-(height(y)-shift_down)); link(x):=p; link(p):=y;
x:=vpack(x,natural); shift_amount(x):=shift_down;
end

@ We have now tied up all the loose ends of the first pass of |mlist_to_hlist|.
The second pass simply goes through and hooks everything together with the
proper glue and penalties. It also handles the |left_noad| and |right_noad| that
might be present, since |max_h| and |max_d| are now known. Variable |p| points
to a node at the current end of the final hlist.

@<Make a second pass over the mlist, ...@>=
p:=temp_head; link(p):=null; q:=mlist; r_type:=0; cur_style:=style;
@<Set up the values of |cur_size| and |cur_mu|, based on |cur_style|@>;
while q<>null do
  begin @<If node |q| is a style node, change the style and |goto delete_q|;
    otherwise if it is not a noad, put it into the hlist,
    advance |q|, and |goto done|; otherwise set |s| to the size
    of noad |q|, set |t| to the associated type (|ord_noad..
    inner_noad|), and set |pen| to the associated penalty@>;
  @<Append inter-element spacing based on |r_type| and |t|@>;
  @<Append any |new_hlist| entries for |q|, and any appropriate penalties@>;
  r_type:=t;
  delete_q: r:=q; q:=link(q); free_node(r,s);
  done: end

@ Just before doing the big |case| switch in the second pass, the program
sets up default values so that most of the branches are short.

@<If node |q| is a style node, change the style...@>=
t:=ord_noad; s:=noad_size; pen:=inf_penalty;
case type(q) of
op_noad,open_noad,close_noad,punct_noad,inner_noad: t:=type(q);
bin_noad: begin t:=bin_noad; pen:=bin_op_penalty;
  end;
rel_noad: begin t:=rel_noad; pen:=rel_penalty;
  end;
ord_noad,vcenter_noad,over_noad,under_noad: do_nothing;
radical_noad: s:=radical_noad_size;
accent_noad: s:=accent_noad_size;
fraction_noad: begin t:=inner_noad; s:=fraction_noad_size;
  end;
left_noad,right_noad: t:=make_left_right(q,style,max_d,max_h);
style_node: @<Change the current style and |goto delete_q|@>;
whatsit_node,penalty_node,rule_node,disc_node,adjust_node,ins_node,mark_node,
 glue_node,kern_node:@t@>@;@/
  begin link(p):=q; p:=q; q:=link(q); link(p):=null; goto done;
  end;
othercases confusion("mlist3")
@:this can't happen mlist3}{\quad mlist3@>
endcases

@ The |make_left_right| function constructs a left or right delimiter of
the required size and returns the value |open_noad| or |close_noad|. The
|right_noad| and |left_noad| will both be based on the original |style|,
so they will have consistent sizes.

We use the fact that |right_noad-left_noad=close_noad-open_noad|.

@<Declare math...@>=
function make_left_right(@!q:pointer;@!style:small_number;
  @!max_d,@!max_h:scaled):small_number;
var delta,@!delta1,@!delta2:scaled; {dimensions used in the calculation}
begin if style<script_style then cur_size:=text_size
else cur_size:=16*((style-text_style) div 2);
delta2:=max_d+axis_height(cur_size);
delta1:=max_h+max_d-delta2;
if delta2>delta1 then delta1:=delta2; {|delta1| is max distance from axis}
delta:=(delta1 div 500)*delimiter_factor;
delta2:=delta1+delta1-delimiter_shortfall;
if delta<delta2 then delta:=delta2;
new_hlist(q):=var_delimiter(delimiter(q),cur_size,delta);
make_left_right:=type(q)-(left_noad-open_noad); {|open_noad| or |close_noad|}
end;

@ @<Change the current style and |goto delete_q|@>=
begin cur_style:=subtype(q); s:=style_node_size;
@<Set up the values of |cur_size| and |cur_mu|, based on |cur_style|@>;
goto delete_q;
end

@ The inter-element spacing in math formulas depends on a $8\times8$ table that
\TeX\ preloads as a 64-digit string. The elements of this string have the
following significance:
$$\vbox{\halign{#\hfil\cr
\.0 means no space;\cr
\.1 means a conditional thin space (\.{\\nonscript\\mskip\\thinmuskip});\cr
\.2 means a thin space (\.{\\mskip\\thinmuskip});\cr
\.3 means a conditional medium space
  (\.{\\nonscript\\mskip\\medmuskip});\cr
\.4 means a conditional thick space
  (\.{\\nonscript\\mskip\\thickmuskip});\cr
\.* means an impossible case.\cr}}$$
This is all pretty cryptic, but {\sl The \TeX book\/} explains what is
supposed to happen, and the string makes it happen.
@:TeXbook}{\sl The \TeX book@>

A global variable |magic_offset| is computed so that if |a| and |b| are
in the range |ord_noad..inner_noad|, then |str_pool[a*8+b+magic_offset]|
is the digit for spacing between noad types |a| and |b|.

If \PASCAL\ had provided a good way to preload constant arrays, this part of
the program would not have been so strange.
@:PASCAL}{\PASCAL@>

@d math_spacing=@;@/
@t\hskip-35pt@>
"0234000122*4000133**3**344*0400400*000000234000111*1111112341011"
@t$ \hskip-35pt$@>

@<Glob...@>=
@!magic_offset:integer; {used to find inter-element spacing}

@ @<Compute the magic offset@>=
magic_offset:=str_start[math_spacing]-9*ord_noad

@ @<Append inter-element spacing based on |r_type| and |t|@>=
if r_type>0 then {not the first noad}
  begin case so(str_pool[r_type*8+t+magic_offset]) of
  "0": x:=0;
  "1": if cur_style<script_style then x:=thin_mu_skip_code@+else x:=0;
  "2": x:=thin_mu_skip_code;
  "3": if cur_style<script_style then x:=med_mu_skip_code@+else x:=0;
  "4": if cur_style<script_style then x:=thick_mu_skip_code@+else x:=0;
  othercases confusion("mlist4")
@:this can't happen mlist4}{\quad mlist4@>
  endcases;
  if x<>0 then
    begin y:=math_glue(glue_par(x),cur_mu);
    z:=new_glue(y); glue_ref_count(y):=null; link(p):=z; p:=z;@/
    subtype(z):=x+1; {store a symbolic subtype}
    end;
  end

@ We insert a penalty node after the hlist entries of noad |q| if |pen|
is not an ``infinite'' penalty, and if the node immediately following |q|
is not a penalty node or a |rel_noad| or absent entirely.

@<Append any |new_hlist| entries for |q|, and any appropriate penalties@>=
if new_hlist(q)<>null then
  begin link(p):=new_hlist(q);
  repeat p:=link(p);
  until link(p)=null;
  end;
if penalties then if link(q)<>null then if pen<inf_penalty then
  begin r_type:=type(link(q));
  if r_type<>penalty_node then if r_type<>rel_noad then
    begin z:=new_penalty(pen); link(p):=z; p:=z;
    end;
  end

@* \[37] Alignment.
It's sort of a miracle whenever \.{\\halign} and \.{\\valign} work, because
they cut across so many of the control structures of \TeX.

Therefore the
present page is probably not the best place for a beginner to start reading
this program; it is better to master everything else first.

Let us focus our thoughts on an example of what the input might be, in order
to get some idea about how the alignment miracle happens. The example doesn't
do anything useful, but it is sufficiently general to indicate all of the
special cases that must be dealt with; please do not be disturbed by its
apparent complexity and meaninglessness.
$$\vbox{\halign{\.{#}\hfil\cr
{}\\tabskip 2pt plus 3pt\cr
{}\\halign to 300pt\{u1\#v1\&\cr
\hskip 50pt\\tabskip 1pt plus 1fil u2\#v2\&\cr
\hskip 50pt u3\#v3\\cr\cr
\hskip 25pt a1\&\\omit a2\&\\vrule\\cr\cr
\hskip 25pt \\noalign\{\\vskip 3pt\}\cr
\hskip 25pt b1\\span b2\\cr\cr
\hskip 25pt \\omit\&c2\\span\\omit\\cr\}\cr}}$$
Here's what happens:

\yskip
(0) When `\.{\\halign to 300pt\{}' is scanned, the |scan_spec| routine
places the 300pt dimension onto the |save_stack|, and an |align_group|
code is placed above it. This will make it possible to complete the alignment
when the matching `\.\}' is found.

(1) The preamble is scanned next. Macros in the preamble are not expanded,
@^preamble@>
except as part of a tabskip specification. For example, if \.{u2} had been
a macro in the preamble above, it would have been expanded, since \TeX\
must look for `\.{minus...}' as part of the tabskip glue. A ``preamble list''
is constructed based on the user's preamble; in our case it contains the
following seven items:
$$\vbox{\halign{\.{#}\hfil\qquad&(#)\hfil\cr
{}\\glue 2pt plus 3pt&the tabskip preceding column 1\cr
{}\\alignrecord, width $-\infty$&preamble info for column 1\cr
{}\\glue 2pt plus 3pt&the tabskip between columns 1 and 2\cr
{}\\alignrecord, width $-\infty$&preamble info for column 2\cr
{}\\glue 1pt plus 1fil&the tabskip between columns 2 and 3\cr
{}\\alignrecord, width $-\infty$&preamble info for column 3\cr
{}\\glue 1pt plus 1fil&the tabskip following column 3\cr}}$$
These ``alignrecord'' entries have the same size as an |unset_node|,
since they will later be converted into such nodes. However, at the
moment they have no |type| or |subtype| fields; they have |info| fields
instead, and these |info| fields are initially set to the value |end_span|,
for reasons explained below. Furthermore, the alignrecord nodes have no
|height| or |depth| fields; these are renamed |u_part| and |v_part|,
and they point to token lists for the templates of the alignment.
For example, the |u_part| field in the first alignrecord points to the
token list `\.{u1}', i.e., the template preceding the `\.\#' for column~1.

(2) \TeX\ now looks at what follows the \.{\\cr} that ended the preamble.
It is not `\.{\\noalign}' or `\.{\\omit}', so this input is put back to
be read again, and the template `\.{u1}' is fed to the scanner. Just
before reading `\.{u1}', \TeX\ goes into restricted horizontal mode.
Just after reading `\.{u1}', \TeX\ will see `\.{a1}', and then (when the
{\.\&} is sensed) \TeX\ will see `\.{v1}'. Then \TeX\ scans an |endv|
token, indicating the end of a column. At this point an |unset_node| is
created, containing the contents of the current hlist (i.e., `\.{u1a1v1}').
The natural width of this unset node replaces the |width| field of the
alignrecord for column~1; in general, the alignrecords will record the
maximum natural width that has occurred so far in a given column.

(3) Since `\.{\\omit}' follows the `\.\&', the templates for column~2
are now bypassed. Again \TeX\ goes into restricted horizontal mode and
makes an |unset_node| from the resulting hlist; but this time the
hlist contains simply `\.{a2}'. The natural width of the new unset box
is remembered in the |width| field of the alignrecord for column~2.

(4) A third |unset_node| is created for column 3, using essentially the
mechanism that worked for column~1; this unset box contains `\.{u3\\vrule
v3}'. The vertical rule in this case has running dimensions that will later
extend to the height and depth of the whole first row, since each |unset_node|
in a row will eventually inherit the height and depth of its enclosing box.

(5) The first row has now ended; it is made into a single unset box
comprising the following seven items:
$$\vbox{\halign{\hbox to 325pt{\qquad\.{#}\hfil}\cr
{}\\glue 2pt plus 3pt\cr
{}\\unsetbox for 1 column: u1a1v1\cr
{}\\glue 2pt plus 3pt\cr
{}\\unsetbox for 1 column: a2\cr
{}\\glue 1pt plus 1fil\cr
{}\\unsetbox for 1 column: u3\\vrule v3\cr
{}\\glue 1pt plus 1fil\cr}}$$
The width of this unset row is unimportant, but it has the correct height
and depth, so the correct baselineskip glue will be computed as the row
is inserted into a vertical list.

(6) Since `\.{\\noalign}' follows the current \.{\\cr}, \TeX\ appends
additional material (in this case \.{\\vskip 3pt}) to the vertical list.
While processing this material, \TeX\ will be in internal vertical
mode, and |no_align_group| will be on |save_stack|.

(7) The next row produces an unset box that looks like this:
$$\vbox{\halign{\hbox to 325pt{\qquad\.{#}\hfil}\cr
{}\\glue 2pt plus 3pt\cr
{}\\unsetbox for 2 columns: u1b1v1u2b2v2\cr
{}\\glue 1pt plus 1fil\cr
{}\\unsetbox for 1 column: {\rm(empty)}\cr
{}\\glue 1pt plus 1fil\cr}}$$
The natural width of the unset box that spans columns 1~and~2 is stored
in a ``span node,'' which we will explain later; the |info| field of the
alignrecord for column~1 now points to the new span node, and the |info|
of the span node points to |end_span|.

(8) The final row produces the unset box
$$\vbox{\halign{\hbox to 325pt{\qquad\.{#}\hfil}\cr
{}\\glue 2pt plus 3pt\cr
{}\\unsetbox for 1 column: {\rm(empty)}\cr
{}\\glue 2pt plus 3pt\cr
{}\\unsetbox for 2 columns: u2c2v2\cr
{}\\glue 1pt plus 1fil\cr}}$$
A new span node is attached to the alignrecord for column 2.

(9) The last step is to compute the true column widths and to change all the
unset boxes to hboxes, appending the whole works to the vertical list that
encloses the \.{\\halign}. The rules for deciding on the final widths of
each unset column box will be explained below.

\yskip\noindent
Note that as \.{\\halign} is being processed, we fearlessly give up control
to the rest of \TeX. At critical junctures, an alignment routine is
called upon to step in and do some little action, but most of the time
these routines just lurk in the background. It's something like
post-hypnotic suggestion.

@ We have mentioned that alignrecords contain no |height| or |depth| fields.
Their |glue_sign| and |glue_order| are pre-empted as well, since it
is necessary to store information about what to do when a template ends.
This information is called the |extra_info| field.

@d u_part(#)==mem[#+height_offset].int {pointer to \<u_j> token list}
@d v_part(#)==mem[#+depth_offset].int {pointer to \<v_j> token list}
@d extra_info(#)==info(#+list_offset) {info to remember during template}

@ Alignments can occur within alignments, so a small stack is used to access
the alignrecord information. At each level we have a |preamble| pointer,
indicating the beginning of the preamble list; a |cur_align| pointer,
indicating the current position in the preamble list; a |cur_span| pointer,
indicating the value of |cur_align| at the beginning of a sequence of
spanned columns; a |cur_loop| pointer, indicating the tabskip glue before
an alignrecord that should be copied next if the current list is extended;
and the |align_state| variable, which indicates the nesting of braces so
that \.{\\cr} and \.{\\span} and tab marks are properly intercepted.
There also are pointers |cur_head| and |cur_tail| to the head and tail
of a list of adjustments being moved out from horizontal mode to
vertical~mode.

The current values of these seven quantities appear in global variables;
when they have to be pushed down, they are stored in 5-word nodes, and
|align_ptr| points to the topmost such node.

@d preamble==link(align_head) {the current preamble list}
@d align_stack_node_size=5 {number of |mem| words to save alignment states}

@<Glob...@>=
@!cur_align:pointer; {current position in preamble list}
@!cur_span:pointer; {start of currently spanned columns in preamble list}
@!cur_loop:pointer; {place to copy when extending a periodic preamble}
@!align_ptr:pointer; {most recently pushed-down alignment stack node}
@!cur_head,@!cur_tail:pointer; {adjustment list pointers}

@ The |align_state| and |preamble| variables are initialized elsewhere.

@<Set init...@>=
align_ptr:=null; cur_align:=null; cur_span:=null; cur_loop:=null;
cur_head:=null; cur_tail:=null;

@ Alignment stack maintenance is handled by a pair of trivial routines
called |push_alignment| and |pop_alignment|.

@p procedure push_alignment;
var p:pointer; {the new alignment stack node}
begin p:=get_node(align_stack_node_size);
link(p):=align_ptr; info(p):=cur_align;
llink(p):=preamble; rlink(p):=cur_span;
mem[p+2].int:=cur_loop; mem[p+3].int:=align_state;
info(p+4):=cur_head; link(p+4):=cur_tail;
align_ptr:=p;
cur_head:=get_avail;
end;
@#
procedure pop_alignment;
var p:pointer; {the top alignment stack node}
begin free_avail(cur_head);
p:=align_ptr;
cur_tail:=link(p+4); cur_head:=info(p+4);
align_state:=mem[p+3].int; cur_loop:=mem[p+2].int;
cur_span:=rlink(p); preamble:=llink(p);
cur_align:=info(p); align_ptr:=link(p);
free_node(p,align_stack_node_size);
end;

@ \TeX\ has eight procedures that govern alignments: |init_align| and
|fin_align| are used at the very beginning and the very end; |init_row| and
|fin_row| are used at the beginning and end of individual rows; |init_span|
is used at the beginning of a sequence of spanned columns (possibly involving
only one column); |init_col| and |fin_col| are used at the beginning and
end of individual columns; and |align_peek| is used after \.{\\cr} to see
whether the next item is \.{\\noalign}.

We shall consider these routines in the order they are first used during
the course of a complete \.{\\halign}, namely |init_align|, |align_peek|,
|init_row|, |init_span|, |init_col|, |fin_col|, |fin_row|, |fin_align|.

@ When \.{\\halign} or \.{\\valign} has been scanned in an appropriate
mode, \TeX\ calls |init_align|, whose task is to get everything off to a
good start. This mostly involves scanning the preamble and putting its
information into the preamble list.
@^preamble@>

@p @t\4@>@<Declare the procedure called |get_preamble_token|@>@t@>@/
procedure@?align_peek; forward;@t\2@>@/
procedure@?normal_paragraph; forward;@t\2@>@/
procedure init_align;
label done, done1, done2, continue;
var save_cs_ptr:pointer; {|warning_index| value for error messages}
@!p:pointer; {for short-term temporary use}
begin save_cs_ptr:=cur_cs; {\.{\\halign} or \.{\\valign}, usually}
push_alignment; align_state:=-1000000; {enter a new alignment level}
@<Check for improper alignment in displayed math@>;
push_nest; {enter a new semantic level}
@<Change current mode to |-vmode| for \.{\\halign}, |-hmode| for \.{\\valign}@>;
scan_spec(align_group,false);@/
@<Scan the preamble and record it in the |preamble| list@>;
new_save_level(align_group);
if every_cr<>null then begin_token_list(every_cr,every_cr_text);
align_peek; {look for \.{\\noalign} or \.{\\omit}}
end;

@ In vertical modes, |prev_depth| already has the correct value. But
if we are in |mmode| (displayed formula mode), we reach out to the
enclosing vertical mode for the |prev_depth| value that produces the
correct baseline calculations.

@<Change current mode...@>=
if mode=mmode then
  begin mode:=-vmode; prev_depth:=nest[nest_ptr-2].aux_field.sc;
  end
else if mode>0 then negate(mode)

@ When \.{\\halign} is used as a displayed formula, there should be
no other pieces of mlists present.

@<Check for improper alignment in displayed math@>=
if (mode=mmode)and((tail<>head)or(incompleat_noad<>null)) then
  begin print_err("Improper "); print_esc("halign"); print(" inside $$'s");
@.Improper \\halign...@>
  help3("Displays can use special alignments (like \eqalignno)")@/
  ("only if nothing but the alignment itself is between $$'s.")@/
  ("So I've deleted the formulas that preceded this alignment.");
  error; flush_math;
  end

@ @<Scan the preamble and record it in the |preamble| list@>=
preamble:=null; cur_align:=align_head; cur_loop:=null; scanner_status:=aligning;
warning_index:=save_cs_ptr; align_state:=-1000000;
  {at this point, |cur_cmd=left_brace|}
loop@+  begin @<Append the current tabskip glue to the preamble list@>;
  if cur_cmd=car_ret then goto done; {\.{\\cr} ends the preamble}
  @<Scan preamble text until |cur_cmd| is |tab_mark| or |car_ret|,
    looking for changes in the tabskip glue; append an
    alignrecord to the preamble list@>;
  end;
done: scanner_status:=normal

@ @<Append the current tabskip glue to the preamble list@>=
link(cur_align):=new_param_glue(tab_skip_code);
cur_align:=link(cur_align)

@ @<Scan preamble text until |cur_cmd| is |tab_mark| or |car_ret|...@>=
@<Scan the template \<u_j>, putting the resulting token list in |hold_head|@>;
link(cur_align):=new_null_box; cur_align:=link(cur_align); {a new alignrecord}
info(cur_align):=end_span; width(cur_align):=null_flag;
u_part(cur_align):=link(hold_head);
@<Scan the template \<v_j>, putting the resulting token list in |hold_head|@>;
v_part(cur_align):=link(hold_head)

@ We enter `\.{\\span}' into |eqtb| with |tab_mark| as its command code,
and with |span_code| as the command modifier. This makes \TeX\ interpret it
essentially the same as an alignment delimiter like `\.\&', yet it is
recognizably different when we need to distinguish it from a normal delimiter.
It also turns out to be useful to give a special |cr_code| to `\.{\\cr}',
and an even larger |cr_cr_code| to `\.{\\crcr}'.

The end of a template is represented by two ``frozen'' control sequences
called \.{\\endtemplate}. The first has the command code |end_template|, which
is |>outer_call|, so it will not easily disappear in the presence of errors.
The |get_x_token| routine converts the first into the second, which has |endv|
as its command code.

@d span_code=256 {distinct from any character}
@d cr_code=257 {distinct from |span_code| and from any character}
@d cr_cr_code=cr_code+1 {this distinguishes \.{\\crcr} from \.{\\cr}}
@d end_template_token==cs_token_flag+frozen_end_template

@<Put each of \TeX's primitives into the hash table@>=
primitive("span",tab_mark,span_code);@/
@!@:span_}{\.{\\span} primitive@>
primitive("cr",car_ret,cr_code);
@!@:cr_}{\.{\\cr} primitive@>
text(frozen_cr):="cr"; eqtb[frozen_cr]:=eqtb[cur_val];@/
primitive("crcr",car_ret,cr_cr_code);
@!@:cr_cr_}{\.{\\crcr} primitive@>
text(frozen_end_template):="endtemplate"; text(frozen_endv):="endtemplate";
eq_type(frozen_endv):=endv; equiv(frozen_endv):=null_list;
eq_level(frozen_endv):=level_one;@/
eqtb[frozen_end_template]:=eqtb[frozen_endv];
eq_type(frozen_end_template):=end_template;

@ @<Cases of |print_cmd_chr|...@>=
tab_mark: if chr_code=span_code then print_esc("span")
  else chr_cmd("alignment tab character ");
car_ret: if chr_code=cr_code then print_esc("cr")
  else print_esc("crcr");

@ The preamble is copied directly, except that \.{\\tabskip} causes a change
to the tabskip glue, thereby possibly expanding macros that immediately
follow it. An appearance of \.{\\span} also causes such an expansion.

Note that if the preamble contains `\.{\\global\\tabskip}', the `\.{\\global}'
token survives in the preamble and the `\.{\\tabskip}' defines new
tabskip glue (locally).

@<Declare the procedure called |get_preamble_token|@>=
procedure get_preamble_token;
label restart;
begin restart: get_token;
while (cur_chr=span_code)and(cur_cmd=tab_mark) do
  begin get_token; {this token will be expanded once}
  if cur_cmd>max_command then
    begin expand; get_token;
    end;
  end;
if cur_cmd=endv then
  fatal_error("(interwoven alignment preambles are not allowed)");
@.interwoven alignment preambles...@>
if (cur_cmd=assign_glue)and(cur_chr=glue_base+tab_skip_code) then
  begin scan_optional_equals; scan_glue(glue_val);
  if global_defs>0 then geq_define(glue_base+tab_skip_code,glue_ref,cur_val)
  else eq_define(glue_base+tab_skip_code,glue_ref,cur_val);
  goto restart;
  end;
end;

@ Spaces are eliminated from the beginning of a template.

@<Scan the template \<u_j>...@>=
p:=hold_head; link(p):=null;
loop@+  begin get_preamble_token;
  if cur_cmd=mac_param then goto done1;
  if (cur_cmd<=car_ret)and(cur_cmd>=tab_mark)and(align_state=-1000000) then
   if (p=hold_head)and(cur_loop=null)and(cur_cmd=tab_mark)
    then cur_loop:=cur_align
   else  begin print_err("Missing # inserted in alignment preamble");
@.Missing \# inserted...@>
    help3("There should be exactly one # between &'s, when an")@/
    ("\halign or \valign is being set up. In this case you had")@/
    ("none, so I've put one in; maybe that will work.");
    back_error; goto done1;
    end
  else if (cur_cmd<>spacer)or(p<>hold_head) then
    begin link(p):=get_avail; p:=link(p); info(p):=cur_tok;
    end;
  end;
done1:

@ @<Scan the template \<v_j>...@>=
p:=hold_head; link(p):=null;
loop@+  begin continue: get_preamble_token;
  if (cur_cmd<=car_ret)and(cur_cmd>=tab_mark)and(align_state=-1000000) then
    goto done2;
  if cur_cmd=mac_param then
    begin print_err("Only one # is allowed per tab");
@.Only one \# is allowed...@>
    help3("There should be exactly one # between &'s, when an")@/
    ("\halign or \valign is being set up. In this case you had")@/
    ("more than one, so I'm ignoring all but the first.");
    error; goto continue;
    end;
  link(p):=get_avail; p:=link(p); info(p):=cur_tok;
  end;
done2: link(p):=get_avail; p:=link(p);
info(p):=end_template_token {put \.{\\endtemplate} at the end}

@ The tricky part about alignments is getting the templates into the
scanner at the right time, and recovering control when a row or column
is finished.

We usually begin a row after each \.{\\cr} has been sensed, unless that
\.{\\cr} is followed by \.{\\noalign} or by the right brace that terminates
the alignment. The |align_peek| routine is used to look ahead and do
the right thing; it either gets a new row started, or gets a \.{\\noalign}
started, or finishes off the alignment.

@<Declare the procedure called |align_peek|@>=
procedure align_peek;
label restart;
begin restart: align_state:=1000000; @<Get the next non-blank non-call token@>;
if cur_cmd=no_align then
  begin scan_left_brace; new_save_level(no_align_group);
  if mode=-vmode then normal_paragraph;
  end
else if cur_cmd=right_brace then fin_align
else if (cur_cmd=car_ret)and(cur_chr=cr_cr_code) then
  goto restart {ignore \.{\\crcr}}
else  begin init_row; {start a new row}
  init_col; {start a new column and replace what we peeked at}
  end;
end;

@ To start a row (i.e., a `row' that rhymes with `dough' but not with `bough'),
we enter a new semantic level, copy the first tabskip glue, and change
from internal vertical mode to restricted horizontal mode or vice versa.
The |space_factor| and |prev_depth| are not used on this semantic level,
but we clear them to zero just to be tidy.

@p @t\4@>@<Declare the procedure called |init_span|@>@t@>@/
procedure init_row;
begin push_nest; mode:=(-hmode-vmode)-mode;
if mode=-hmode then space_factor:=0 @+else prev_depth:=0;
tail_append(new_glue(glue_ptr(preamble)));
subtype(tail):=tab_skip_code+1;@/
cur_align:=link(preamble); cur_tail:=cur_head; init_span(cur_align);
end;

@ The parameter to |init_span| is a pointer to the alignrecord where the
next column or group of columns will begin. A new semantic level is
entered, so that the columns will generate a list for subsequent packaging.

@<Declare the procedure called |init_span|@>=
procedure init_span(@!p:pointer);
begin push_nest;
if mode=-hmode then space_factor:=1000
else  begin prev_depth:=ignore_depth; normal_paragraph;
  end;
cur_span:=p;
end;

@ When a column begins, we assume that |cur_cmd| is either |omit| or else
the current token should be put back into the input until the \<u_j>
template has been scanned.  (Note that |cur_cmd| might be |tab_mark| or
|car_ret|.)  We also assume that |align_state| is approximately 1000000 at
this time.  We remain in the same mode, and start the template if it is
called for.

@p procedure init_col;
begin extra_info(cur_align):=cur_cmd;
if cur_cmd=omit then align_state:=0
else  begin back_input; begin_token_list(u_part(cur_align),u_template);
  end; {now |align_state=1000000|}
end;

@ The scanner sets |align_state| to zero when the \<u_j> template ends. When
a subsequent \.{\\cr} or \.{\\span} or tab mark occurs with |align_state=0|,
the scanner activates the following code, which fires up the \<v_j> template.
We need to remember the |cur_chr|, which is either |cr_cr_code|, |cr_code|,
|span_code|, or a character code, depending on how the column text has ended.

This part of the program had better not be activated when the preamble
to another alignment is being scanned, or when no alignment preamble is active.

@<Insert the \(v)\<v_j>...@>=
begin if (scanner_status=aligning) or (cur_align=null) then
  fatal_error("(interwoven alignment preambles are not allowed)");
@.interwoven alignment preambles...@>
cur_cmd:=extra_info(cur_align); extra_info(cur_align):=cur_chr;
if cur_cmd=omit then begin_token_list(omit_template,v_template)
else begin_token_list(v_part(cur_align),v_template);
align_state:=1000000; goto restart;
end

@ The token list |omit_template| just referred to is a constant token
list that contains the special control sequence \.{\\endtemplate} only.

@<Initialize the special...@>=
info(omit_template):=end_template_token; {|link(omit_template)=null|}

@ When the |endv| command at the end of a \<v_j> template comes through the
scanner, things really start to happen; and it is the |fin_col| routine
that makes them happen. This routine returns |true| if a row as well as a
column has been finished.

@p function fin_col:boolean;
label exit;
var p:pointer; {the alignrecord after the current one}
@!q,@!r:pointer; {temporary pointers for list manipulation}
@!s:pointer; {a new span node}
@!u:pointer; {a new unset box}
@!w:scaled; {natural width}
@!o:glue_ord; {order of infinity}
@!n:halfword; {span counter}
begin if cur_align=null then confusion("endv");
q:=link(cur_align);@+if q=null then confusion("endv");
@:this can't happen endv}{\quad endv@>
if align_state<500000 then
  fatal_error("(interwoven alignment preambles are not allowed)");
@.interwoven alignment preambles...@>
p:=link(q);
@<If the preamble list has been traversed, check that the row has ended@>;
if extra_info(cur_align)<>span_code then
  begin unsave; new_save_level(align_group);@/
  @<Package an unset box for the current column and record its width@>;
  @<Copy the tabskip glue between columns@>;
  if extra_info(cur_align)>=cr_code then
    begin fin_col:=true; return;
    end;
  init_span(p);
  end;
align_state:=1000000; @<Get the next non-blank non-call token@>;
cur_align:=p;
init_col; fin_col:=false;
exit: end;

@ @<If the preamble list has been traversed, check that the row has ended@>=
if (p=null)and(extra_info(cur_align)<cr_code) then
 if cur_loop<>null then @<Lengthen the preamble periodically@>
 else  begin print_err("Extra alignment tab has been changed to ");
@.Extra alignment tab...@>
  print_esc("cr");
  help3("You have given more \span or & marks than there were")@/
  ("in the preamble to the \halign or \valign now in progress.")@/
  ("So I'll assume that you meant to type \cr instead.");
  extra_info(cur_align):=cr_code; error;
  end

@ @<Lengthen the preamble...@>=
begin link(q):=new_null_box; p:=link(q); {a new alignrecord}
info(p):=end_span; width(p):=null_flag; cur_loop:=link(cur_loop);
@<Copy the templates from node |cur_loop| into node |p|@>;
cur_loop:=link(cur_loop);
link(p):=new_glue(glue_ptr(cur_loop));
end

@ @<Copy the templates from node |cur_loop| into node |p|@>=
q:=hold_head; r:=u_part(cur_loop);
while r<>null do
  begin link(q):=get_avail; q:=link(q); info(q):=info(r); r:=link(r);
  end;
link(q):=null; u_part(p):=link(hold_head);
q:=hold_head; r:=v_part(cur_loop);
while r<>null do
  begin link(q):=get_avail; q:=link(q); info(q):=info(r); r:=link(r);
  end;
link(q):=null; v_part(p):=link(hold_head)

@ @<Copy the tabskip glue...@>=
tail_append(new_glue(glue_ptr(link(cur_align))));
subtype(tail):=tab_skip_code+1

@ @<Package an unset...@>=
begin if mode=-hmode then
  begin adjust_tail:=cur_tail; u:=hpack(link(head),natural); w:=width(u);
  cur_tail:=adjust_tail; adjust_tail:=null;
  end
else  begin u:=vpackage(link(head),natural,0); w:=height(u);
  end;
n:=min_quarterword; {this represents a span count of 1}
if cur_span<>cur_align then @<Update width entry for spanned columns@>
else if w>width(cur_align) then width(cur_align):=w;
type(u):=unset_node; span_count(u):=n;@/
@<Determine the stretch order@>;
glue_order(u):=o; glue_stretch(u):=total_stretch[o];@/
@<Determine the shrink order@>;
glue_sign(u):=o; glue_shrink(u):=total_shrink[o];@/
pop_nest; link(tail):=u; tail:=u;
end

@ A span node is a 2-word record containing |width|, |info|, and |link|
fields. The |link| field is not really a link, it indicates the number of
spanned columns; the |info| field points to a span node for the same
starting column, having a greater extent of spanning, or to |end_span|,
which has the largest possible |link| field; the |width| field holds the
largest natural width corresponding to a particular set of spanned columns.

A list of the maximum widths so far, for spanned columns starting at a
given column, begins with the |info| field of the alignrecord for that
column.

@d span_node_size=2 {number of |mem| words for a span node}

@<Initialize the special list heads...@>=
link(end_span):=max_quarterword+1; info(end_span):=null;

@ @<Update width entry for spanned columns@>=
begin q:=cur_span;
repeat incr(n); q:=link(link(q));
until q=cur_align;
if n>max_quarterword then confusion("256 spans"); {this can happen, but won't}
@^system dependencies@>
@:this can't happen 256 spans}{\quad 256 spans@>
q:=cur_span; while link(info(q))<n do q:=info(q);
if link(info(q))>n then
  begin s:=get_node(span_node_size); info(s):=info(q); link(s):=n;
  info(q):=s; width(s):=w;
  end
else if width(info(q))<w then width(info(q)):=w;
end

@ At the end of a row, we append an unset box to the current vlist (for
\.{\\halign}) or the current hlist (for \.{\\valign}). This unset box
contains the unset boxes for the columns, separated by the tabskip glue.
Everything will be set later.

@p procedure fin_row;
var p:pointer; {the new unset box}
begin if mode=-hmode then
  begin p:=hpack(link(head),natural);
  pop_nest; append_to_vlist(p);
  if cur_head<>cur_tail then
    begin link(tail):=link(cur_head); tail:=cur_tail;
    end;
  end
else  begin p:=vpack(link(head),natural); pop_nest;
  link(tail):=p; tail:=p; space_factor:=1000;
  end;
type(p):=unset_node; glue_stretch(p):=0;
if every_cr<>null then begin_token_list(every_cr,every_cr_text);
align_peek;
end; {note that |glue_shrink(p)=0| since |glue_shrink==shift_amount|}

@ Finally, we will reach the end of the alignment, and we can breathe a
sigh of relief that memory hasn't overflowed. All the unset boxes will now be
set so that the columns line up, taking due account of spanned columns.

@p procedure@?do_assignments; forward;@t\2@>@/
procedure@?resume_after_display; forward;@t\2@>@/
procedure@?build_page; forward;@t\2@>@/
procedure fin_align;
var @!p,@!q,@!r,@!s,@!u,@!v: pointer; {registers for the list operations}
@!t,@!w:scaled; {width of column}
@!o:scaled; {shift offset for unset boxes}
@!n:halfword; {matching span amount}
@!rule_save:scaled; {temporary storage for |overfull_rule|}
@!aux_save:memory_word; {temporary storage for |aux|}
begin if cur_group<>align_group then confusion("align1");
@:this can't happen align}{\quad align@>
unsave; {that |align_group| was for individual entries}
if cur_group<>align_group then confusion("align0");
unsave; {that |align_group| was for the whole alignment}
if nest[nest_ptr-1].mode_field=mmode then o:=display_indent
  else o:=0;
@<Go through the preamble list, determining the column widths and
  changing the alignrecords to dummy unset boxes@>;
@<Package the preamble list, to determine the actual tabskip glue amounts,
  and let |p| point to this prototype box@>;
@<Set the glue in all the unset boxes of the current list@>;
flush_node_list(p); pop_alignment;
@<Insert the \(c)current list into its environment@>;
end;@/
@t\4@>@<Declare the procedure called |align_peek|@>

@ It's time now to dismantle the preamble list and to compute the column
widths. Let $w_{ij}$ be the maximum of the natural widths of all entries
that span columns $i$ through $j$, inclusive. The alignrecord for column~$i$
contains $w_{ii}$ in its |width| field, and there is also a linked list of
the nonzero $w_{ij}$ for increasing $j$, accessible via the |info| field;
these span nodes contain the value $j-i-1+|min_quarterword|$ in their
|link| fields. The values of $w_{ii}$ were initialized to |null_flag|, which
we regard as $-\infty$.

The final column widths are defined by the formula
$$w_j=\max_{1\L i\L j}\biggl( w_{ij}-\sum_{i\L k<j}(t_k+w_k)\biggr),$$
where $t_k$ is the natural width of the tabskip glue between columns
$k$ and~$k+1$. However, if $w_{ij}=-\infty$ for all |i| in the range
|1<=i<=j| (i.e., if every entry that involved column~|j| also involved
column~|j+1|), we let $w_j=0$, and we zero out the tabskip glue after
column~|j|.

\TeX\ computes these values by using the following scheme: First $w_1=w_{11}$.
Then replace $w_{2j}$ by $\max(w_{2j},w_{1j}-t_1-w_1)$, for all $j>1$.
Then $w_2=w_{22}$. Then replace $w_{3j}$ by $\max(w_{3j},w_{2j}-t_2-w_2)$
for all $j>2$; and so on. If any $w_j$ turns out to be $-\infty$, its
value is changed to zero and so is the next tabskip.

@<Go through the preamble list,...@>=
q:=link(preamble);
repeat flush_list(u_part(q)); flush_list(v_part(q));
p:=link(link(q));
if width(q)=null_flag then
  @<Nullify |width(q)| and the tabskip glue following this column@>;
if info(q)<>end_span then
  @<Merge the widths in the span nodes of |q| with those of |p|,
    destroying the span nodes of |q|@>;
type(q):=unset_node; span_count(q):=min_quarterword; height(q):=0;
depth(q):=0; glue_order(q):=normal; glue_sign(q):=normal;
glue_stretch(q):=0; glue_shrink(q):=0; q:=p;
until q=null

@ @<Nullify |width(q)| and the tabskip glue following this column@>=
begin width(q):=0; r:=link(q); s:=glue_ptr(r);
if s<>zero_glue then
  begin add_glue_ref(zero_glue); delete_glue_ref(s);
  glue_ptr(r):=zero_glue;
  end;
end

@ Merging of two span-node lists is a typical exercise in the manipulation of
linearly linked data structures. The essential invariant in the following
|repeat| loop is that we want to dispense with node |r|, in |q|'s list,
and |u| is its successor; all nodes of |p|'s list up to and including |s|
have been processed, and the successor of |s| matches |r| or precedes |r|
or follows |r|, according as |link(r)=n| or |link(r)>n| or |link(r)<n|.

@<Merge the widths...@>=
begin t:=width(q)+width(glue_ptr(link(q)));
r:=info(q); s:=end_span; info(s):=p; n:=min_quarterword+1;
repeat width(r):=width(r)-t; u:=info(r);
while link(r)>n do
  begin s:=info(s); n:=link(info(s))+1;
  end;
if link(r)<n then
  begin info(r):=info(s); info(s):=r; decr(link(r)); s:=r;
  end
else  begin if width(r)>width(info(s)) then width(info(s)):=width(r);
  free_node(r,span_node_size);
  end;
r:=u;
until r=end_span;
end

@ Now the preamble list has been converted to a list of alternating unset
boxes and tabskip glue, where the box widths are equal to the final
column sizes. In case of \.{\\valign}, we change the widths to heights,
so that a correct error message will be produced if the alignment is
overfull or underfull.

@<Package the preamble list...@>=
save_ptr:=save_ptr-2; pack_begin_line:=-mode_line;
if mode=-vmode then
  begin rule_save:=overfull_rule;
  overfull_rule:=0; {prevent rule from being packaged}
  p:=hpack(preamble,saved(1),saved(0)); overfull_rule:=rule_save;
  end
else  begin q:=link(preamble);
  repeat height(q):=width(q); width(q):=0; q:=link(link(q));
  until q=null;
  p:=vpack(preamble,saved(1),saved(0));
  q:=link(preamble);
  repeat width(q):=height(q); height(q):=0; q:=link(link(q));
  until q=null;
  end;
pack_begin_line:=0

@ @<Set the glue in all the unset...@>=
q:=link(head); s:=head;
while q<>null do
  begin if not is_char_node(q) then
    if type(q)=unset_node then
      @<Set the unset box |q| and the unset boxes in it@>
    else if type(q)=rule_node then
      @<Make the running dimensions in rule |q| extend to the
        boundaries of the alignment@>;
  s:=q; q:=link(q);
  end

@ @<Make the running dimensions in rule |q| extend...@>=
begin if is_running(width(q)) then width(q):=width(p);
if is_running(height(q)) then height(q):=height(p);
if is_running(depth(q)) then depth(q):=depth(p);
if o<>0 then
  begin r:=link(q); link(q):=null; q:=hpack(q,natural);
  shift_amount(q):=o; link(q):=r; link(s):=q;
  end;
end

@ The unset box |q| represents a row that contains one or more unset boxes,
depending on how soon \.{\\cr} occurred in that row.

@<Set the unset box |q| and the unset boxes in it@>=
begin if mode=-vmode then
  begin type(q):=hlist_node; width(q):=width(p);
  end
else  begin type(q):=vlist_node; height(q):=height(p);
  end;
glue_order(q):=glue_order(p); glue_sign(q):=glue_sign(p);
glue_set(q):=glue_set(p); shift_amount(q):=o;
r:=link(list_ptr(q)); s:=link(list_ptr(p));
repeat @<Set the glue in node |r| and change it from an unset node@>;
r:=link(link(r)); s:=link(link(s));
until r=null;
end

@ A box made from spanned columns will be followed by tabskip glue nodes and
by empty boxes as if there were no spanning. This permits perfect alignment
of subsequent entries, and it prevents values that depend on floating point
arithmetic from entering into the dimensions of any boxes.

@<Set the glue in node |r|...@>=
n:=span_count(r); t:=width(s); w:=t; u:=hold_head;
while n>min_quarterword do
  begin decr(n);
  @<Append tabskip glue and an empty box to list |u|,
    and update |s| and |t| as the prototype nodes are passed@>;
  end;
if mode=-vmode then
  @<Make the unset node |r| into an |hlist_node| of width |w|,
    setting the glue as if the width were |t|@>
else @<Make the unset node |r| into a |vlist_node| of height |w|,
    setting the glue as if the height were |t|@>;
shift_amount(r):=0;
if u<>hold_head then {append blank boxes to account for spanned nodes}
  begin link(u):=link(r); link(r):=link(hold_head); r:=u;
  end

@ @<Append tabskip glue and an empty box to list |u|...@>=
s:=link(s); v:=glue_ptr(s); link(u):=new_glue(v); u:=link(u);
subtype(u):=tab_skip_code+1; t:=t+width(v);
if glue_sign(p)=stretching then
  begin if stretch_order(v)=glue_order(p) then
    t:=t+round(float(glue_set(p))*stretch(v));
@^real multiplication@>
  end
else if glue_sign(p)=shrinking then
  begin if shrink_order(v)=glue_order(p) then
    t:=t-round(float(glue_set(p))*shrink(v));
  end;
s:=link(s); link(u):=new_null_box; u:=link(u); t:=t+width(s);
if mode=-vmode then width(u):=width(s)@+else
  begin type(u):=vlist_node; height(u):=width(s);
  end

@ @<Make the unset node |r| into an |hlist_node| of width |w|...@>=
begin height(r):=height(q); depth(r):=depth(q);
if t=width(r) then
  begin glue_sign(r):=normal; glue_order(r):=normal;
  set_glue_ratio_zero(glue_set(r));
  end
else if t>width(r) then
  begin glue_sign(r):=stretching;
  if glue_stretch(r)=0 then set_glue_ratio_zero(glue_set(r))
  else glue_set(r):=unfloat((t-width(r))/glue_stretch(r));
@^real division@>
  end
else  begin glue_order(r):=glue_sign(r); glue_sign(r):=shrinking;
  if glue_shrink(r)=0 then set_glue_ratio_zero(glue_set(r))
  else if (glue_order(r)=normal)and(width(r)-t>glue_shrink(r)) then
    set_glue_ratio_one(glue_set(r))
  else glue_set(r):=unfloat((width(r)-t)/glue_shrink(r));
  end;
width(r):=w; type(r):=hlist_node;
end

@ @<Make the unset node |r| into a |vlist_node| of height |w|...@>=
begin width(r):=width(q);
if t=height(r) then
  begin glue_sign(r):=normal; glue_order(r):=normal;
  set_glue_ratio_zero(glue_set(r));
  end
else if t>height(r) then
  begin glue_sign(r):=stretching;
  if glue_stretch(r)=0 then set_glue_ratio_zero(glue_set(r))
  else glue_set(r):=unfloat((t-height(r))/glue_stretch(r));
@^real division@>
  end
else  begin glue_order(r):=glue_sign(r); glue_sign(r):=shrinking;
  if glue_shrink(r)=0 then set_glue_ratio_zero(glue_set(r))
  else if (glue_order(r)=normal)and(height(r)-t>glue_shrink(r)) then
    set_glue_ratio_one(glue_set(r))
  else glue_set(r):=unfloat((height(r)-t)/glue_shrink(r));
  end;
height(r):=w; type(r):=vlist_node;
end

@ We now have a completed alignment, in the list that starts at |head|
and ends at |tail|. This list will be merged with the one that encloses
it. (In case the enclosing mode is |mmode|, for displayed formulas,
we will need to insert glue before and after the display; that part of the
program will be deferred until we're more familiar with such operations.)

In horizontal mode, the |clang| part of |aux| is undefined; an over-cautious
\PASCAL\ runtime system may complain about this.
@^dirty \PASCAL@>

@<Insert the \(c)current list into its environment@>=
aux_save:=aux; p:=link(head); q:=tail; pop_nest;
if mode=mmode then @<Finish an alignment in a display@>
else  begin aux:=aux_save; link(tail):=p;
  if p<>null then tail:=q;
  if mode=vmode then build_page;
  end

@* \[38] Breaking paragraphs into lines.
We come now to what is probably the most interesting algorithm of \TeX:
the mechanism for choosing the ``best possible'' breakpoints that yield
the individual lines of a paragraph. \TeX's line-breaking algorithm takes
a given horizontal list and converts it to a sequence of boxes that are
appended to the current vertical list. In the course of doing this, it
creates a special data structure containing three kinds of records that are
not used elsewhere in \TeX. Such nodes are created while a paragraph is
being processed, and they are destroyed afterwards; thus, the other parts
of \TeX\ do not need to know anything about how line-breaking is done.

The method used here is based on an approach devised by Michael F. Plass and
@^Plass, Michael Frederick@>
@^Knuth, Donald Ervin@>
the author in 1977, subsequently generalized and improved by the same two
people in 1980. A detailed discussion appears in {\sl SOFTWARE---Practice
\AM\ Experience \bf11} (1981), 1119--1184, where it is shown that the
line-breaking problem can be regarded as a special case of the problem of
computing the shortest path in an acyclic network. The cited paper includes
numerous examples and describes the history of line breaking as it has been
practiced by printers through the ages. The present implementation adds two
new ideas to the algorithm of 1980: memory space requirements are considerably
reduced by using smaller records for inactive nodes than for active ones,
and arithmetic overflow is avoided by using ``delta distances'' instead of
keeping track of the total distance from the beginning of the paragraph to the
current point.

@ The |line_break| procedure should be invoked only in horizontal mode; it
leaves that mode and places its output into the current vlist of the
enclosing vertical mode (or internal vertical mode).
There is one explicit parameter:  |final_widow_penalty| is the amount of
additional penalty to be inserted before the final line of the paragraph.

There are also a number of implicit parameters: The hlist to be broken
starts at |link(head)|, and it is nonempty. The value of |prev_graf| in the
enclosing semantic level tells where the paragraph should begin in the
sequence of line numbers, in case hanging indentation or \.{\\parshape}
are in use; |prev_graf| is zero unless this paragraph is being continued
after a displayed formula.  Other implicit parameters, such as the
|par_shape_ptr| and various penalties to use for hyphenation, etc., appear
in |eqtb|.

After |line_break| has acted, it will have updated the current vlist and the
value of |prev_graf|. Furthermore, the global variable |just_box| will
point to the final box created by |line_break|, so that the width of this
line can be ascertained when it is necessary to decide whether to use
|above_display_skip| or |above_display_short_skip| before a displayed formula.

@<Glob...@>=
@!just_box:pointer; {the |hlist_node| for the last line of the new paragraph}

@ Since |line_break| is a rather lengthy procedure---sort of a small world unto
itself---we must build it up little by little, somewhat more cautiously
than we have done with the simpler procedures of \TeX. Here is the
general outline.

@p@t\4@>@<Declare subprocedures for |line_break|@>
procedure line_break(@!final_widow_penalty:integer);
label done,done1,done2,done3,done4,done5,continue;
var @<Local variables for line breaking@>@;
begin pack_begin_line:=mode_line; {this is for over/underfull box messages}
@<Get ready to start line breaking@>;
@<Find optimal breakpoints@>;
@<Break the paragraph at the chosen breakpoints, justify the resulting lines
to the correct widths, and append them to the current vertical list@>;
@<Clean up the memory by removing the break nodes@>;
pack_begin_line:=0;
end;

@ The first task is to move the list from |head| to |temp_head| and go
into the enclosing semantic level. We also append the \.{\\parfillskip}
glue to the end of the paragraph, removing a space (or other glue node) if
it was there, since spaces usually precede blank lines and instances of
`\.{\$\$}'. The |par_fill_skip| is preceded by an infinite penalty, so
it will never be considered as a potential breakpoint.

This code assumes that a |glue_node| and a |penalty_node| occupy the
same number of |mem|~words.
@^data structure assumptions@>

@<Get ready to start...@>=
link(temp_head):=link(head);
if is_char_node(tail) then tail_append(new_penalty(inf_penalty))
else if type(tail)<>glue_node then tail_append(new_penalty(inf_penalty))
else  begin type(tail):=penalty_node; delete_glue_ref(glue_ptr(tail));
  flush_node_list(leader_ptr(tail)); penalty(tail):=inf_penalty;
  end;
link(tail):=new_param_glue(par_fill_skip_code);
init_cur_lang:=prev_graf mod @'200000;
init_l_hyf:=prev_graf div @'20000000;
init_r_hyf:=(prev_graf div @'200000) mod @'100;
pop_nest;

@ When looking for optimal line breaks, \TeX\ creates a ``break node'' for
each break that is {\sl feasible}, in the sense that there is a way to end
a line at the given place without requiring any line to stretch more than
a given tolerance. A break node is characterized by three things: the position
of the break (which is a pointer to a |glue_node|, |math_node|, |penalty_node|,
or |disc_node|); the ordinal number of the line that will follow this
breakpoint; and the fitness classification of the line that has just
ended, i.e., |tight_fit|, |decent_fit|, |loose_fit|, or |very_loose_fit|.

@d tight_fit=3 {fitness classification for lines shrinking 0.5 to 1.0 of their
  shrinkability}
@d loose_fit=1 {fitness classification for lines stretching 0.5 to 1.0 of their
  stretchability}
@d very_loose_fit=0 {fitness classification for lines stretching more than
  their stretchability}
@d decent_fit=2 {fitness classification for all other lines}

@ The algorithm essentially determines the best possible way to achieve
each feasible combination of position, line, and fitness. Thus, it answers
questions like, ``What is the best way to break the opening part of the
paragraph so that the fourth line is a tight line ending at such-and-such
a place?'' However, the fact that all lines are to be the same length
after a certain point makes it possible to regard all sufficiently large
line numbers as equivalent, when the looseness parameter is zero, and this
makes it possible for the algorithm to save space and time.

An ``active node'' and a ``passive node'' are created in |mem| for each
feasible breakpoint that needs to be considered. Active nodes are three
words long and passive nodes are two words long. We need active nodes only
for breakpoints near the place in the paragraph that is currently being
examined, so they are recycled within a comparatively short time after
they are created.

@ An active node for a given breakpoint contains six fields:

\yskip\hang|link| points to the next node in the list of active nodes; the
last active node has |link=last_active|.

\yskip\hang|break_node| points to the passive node associated with this
breakpoint.

\yskip\hang|line_number| is the number of the line that follows this
breakpoint.

\yskip\hang|fitness| is the fitness classification of the line ending at this
breakpoint.

\yskip\hang|type| is either |hyphenated| or |unhyphenated|, depending on
whether this breakpoint is a |disc_node|.

\yskip\hang|total_demerits| is the minimum possible sum of demerits over all
lines leading from the beginning of the paragraph to this breakpoint.

\yskip\noindent
The value of |link(active)| points to the first active node on a linked list
of all currently active nodes. This list is in order by |line_number|,
except that nodes with |line_number>easy_line| may be in any order relative
to each other.

@d active_node_size=3 {number of words in active nodes}
@d fitness==subtype {|very_loose_fit..tight_fit| on final line for this break}
@d break_node==rlink {pointer to the corresponding passive node}
@d line_number==llink {line that begins at this breakpoint}
@d total_demerits(#)==mem[#+2].int {the quantity that \TeX\ minimizes}
@d unhyphenated=0 {the |type| of a normal active break node}
@d hyphenated=1 {the |type| of an active node that breaks at a |disc_node|}
@d last_active==active {the active list ends where it begins}

@ @<Initialize the special list heads...@>=
type(last_active):=hyphenated; line_number(last_active):=max_halfword;
subtype(last_active):=0; {the |subtype| is never examined by the algorithm}

@ The passive node for a given breakpoint contains only four fields:

\yskip\hang|link| points to the passive node created just before this one,
if any, otherwise it is |null|.

\yskip\hang|cur_break| points to the position of this breakpoint in the
horizontal list for the paragraph being broken.

\yskip\hang|prev_break| points to the passive node that should precede this
one in an optimal path to this breakpoint.

\yskip\hang|serial| is equal to |n| if this passive node is the |n|th
one created during the current pass. (This field is used only when
printing out detailed statistics about the line-breaking calculations.)

\yskip\noindent
There is a global variable called |passive| that points to the most
recently created passive node. Another global variable, |printed_node|,
is used to help print out the paragraph when detailed information about
the line-breaking computation is being displayed.

@d passive_node_size=2 {number of words in passive nodes}
@d cur_break==rlink {in passive node, points to position of this breakpoint}
@d prev_break==llink {points to passive node that should precede this one}
@d serial==info {serial number for symbolic identification}

@<Glob...@>=
@!passive:pointer; {most recent node on passive list}
@!printed_node:pointer; {most recent node that has been printed}
@!pass_number:halfword; {the number of passive nodes allocated on this pass}

@ The active list also contains ``delta'' nodes that help the algorithm
compute the badness of individual lines. Such nodes appear only between two
active nodes, and they have |type=delta_node|. If |p| and |r| are active nodes
and if |q| is a delta node between them, so that |link(p)=q| and |link(q)=r|,
then |q| tells the space difference between lines in the horizontal list that
start after breakpoint |p| and lines that start after breakpoint |r|. In
other words, if we know the length of the line that starts after |p| and
ends at our current position, then the corresponding length of the line that
starts after |r| is obtained by adding the amounts in node~|q|. A delta node
contains six scaled numbers, since it must record the net change in glue
stretchability with respect to all orders of infinity. The natural width
difference appears in |mem[q+1].sc|; the stretch differences in units of
pt, fil, fill, and filll appear in |mem[q+2..q+5].sc|; and the shrink difference
appears in |mem[q+6].sc|. The |subtype| field of a delta node is not used.

@d delta_node_size=7 {number of words in a delta node}
@d delta_node=2 {|type| field in a delta node}

@ As the algorithm runs, it maintains a set of six delta-like registers
for the length of the line following the first active breakpoint to the
current position in the given hlist. When it makes a pass through the
active list, it also maintains a similar set of six registers for the
length following the active breakpoint of current interest. A third set
holds the length of an empty line (namely, the sum of \.{\\leftskip} and
\.{\\rightskip}); and a fourth set is used to create new delta nodes.

When we pass a delta node we want to do operations like
$$\hbox{\ignorespaces|for
k:=1 to 6 do cur_active_width[k]:=cur_active_width[k]+mem[q+k].sc|};$$ and we
want to do this without the overhead of |for| loops. The |do_all_six|
macro makes such six-tuples convenient.

@d do_all_six(#)==#(1);#(2);#(3);#(4);#(5);#(6)

@<Glo...@>=
@!active_width:array[1..6] of scaled;
  {distance from first active node to~|cur_p|}
@!cur_active_width:array[1..6] of scaled; {distance from current active node}
@!background:array[1..6] of scaled; {length of an ``empty'' line}
@!break_width:array[1..6] of scaled; {length being computed after current break}

@ Let's state the principles of the delta nodes more precisely and concisely,
so that the following programs will be less obscure. For each legal
breakpoint~|p| in the paragraph, we define two quantities $\alpha(p)$ and
$\beta(p)$ such that the length of material in a line from breakpoint~|p|
to breakpoint~|q| is $\gamma+\beta(q)-\alpha(p)$, for some fixed $\gamma$.
Intuitively, $\alpha(p)$ and $\beta(q)$ are the total length of material from
the beginning of the paragraph to a point ``after'' a break at |p| and to a
point ``before'' a break at |q|; and $\gamma$ is the width of an empty line,
namely the length contributed by \.{\\leftskip} and \.{\\rightskip}.

Suppose, for example, that the paragraph consists entirely of alternating
boxes and glue skips; let the boxes have widths $x_1\ldots x_n$ and
let the skips have widths $y_1\ldots y_n$, so that the paragraph can be
represented by $x_1y_1\ldots x_ny_n$. Let $p_i$ be the legal breakpoint
at $y_i$; then $\alpha(p_i)=x_1+y_1+\cdots+x_i+y_i$, and $\beta(p_i)=
x_1+y_1+\cdots+x_i$. To check this, note that the length of material from
$p_2$ to $p_5$, say, is $\gamma+x_3+y_3+x_4+y_4+x_5=\gamma+\beta(p_5)
-\alpha(p_2)$.

The quantities $\alpha$, $\beta$, $\gamma$ involve glue stretchability and
shrinkability as well as a natural width. If we were to compute $\alpha(p)$
and $\beta(p)$ for each |p|, we would need multiple precision arithmetic, and
the multiprecise numbers would have to be kept in the active nodes.
\TeX\ avoids this problem by working entirely with relative differences
or ``deltas.'' Suppose, for example, that the active list contains
$a_1\,\delta_1\,a_2\,\delta_2\,a_3$, where the |a|'s are active breakpoints
and the $\delta$'s are delta nodes. Then $\delta_1=\alpha(a_1)-\alpha(a_2)$
and $\delta_2=\alpha(a_2)-\alpha(a_3)$. If the line breaking algorithm is
currently positioned at some other breakpoint |p|, the |active_width| array
contains the value $\gamma+\beta(p)-\alpha(a_1)$. If we are scanning through
the list of active nodes and considering a tentative line that runs from
$a_2$ to~|p|, say, the |cur_active_width| array will contain the value
$\gamma+\beta(p)-\alpha(a_2)$. Thus, when we move from $a_2$ to $a_3$,
we want to add $\alpha(a_2)-\alpha(a_3)$ to |cur_active_width|; and this
is just $\delta_2$, which appears in the active list between $a_2$ and
$a_3$. The |background| array contains $\gamma$. The |break_width| array
will be used to calculate values of new delta nodes when the active
list is being updated.

@ Glue nodes in a horizontal list that is being paragraphed are not supposed to
include ``infinite'' shrinkability; that is why the algorithm maintains
four registers for stretching but only one for shrinking. If the user tries to
introduce infinite shrinkability, the shrinkability will be reset to finite
and an error message will be issued. A boolean variable |no_shrink_error_yet|
prevents this error message from appearing more than once per paragraph.

@d check_shrinkage(#)==if (shrink_order(#)<>normal)and(shrink(#)<>0) then
  begin #:=finite_shrink(#);
  end

@<Glob...@>=
@!no_shrink_error_yet:boolean; {have we complained about infinite shrinkage?}

@ @<Declare subprocedures for |line_break|@>=
function finite_shrink(@!p:pointer):pointer; {recovers from infinite shrinkage}
var q:pointer; {new glue specification}
begin if no_shrink_error_yet then
  begin no_shrink_error_yet:=false;
  print_err("Infinite glue shrinkage found in a paragraph");
@.Infinite glue shrinkage...@>
  help5("The paragraph just ended includes some glue that has")@/
  ("infinite shrinkability, e.g., `\hskip 0pt minus 1fil'.")@/
  ("Such glue doesn't belong there---it allows a paragraph")@/
  ("of any length to fit on one line. But it's safe to proceed,")@/
  ("since the offensive shrinkability has been made finite.");
  error;
  end;
q:=new_spec(p); shrink_order(q):=normal;
delete_glue_ref(p); finite_shrink:=q;
end;

@ @<Get ready to start...@>=
no_shrink_error_yet:=true;@/
check_shrinkage(left_skip); check_shrinkage(right_skip);@/
q:=left_skip; r:=right_skip; background[1]:=width(q)+width(r);@/
background[2]:=0; background[3]:=0; background[4]:=0; background[5]:=0;@/
background[2+stretch_order(q)]:=stretch(q);@/
background[2+stretch_order(r)]:=@|background[2+stretch_order(r)]+stretch(r);@/
background[6]:=shrink(q)+shrink(r);

@ A pointer variable |cur_p| runs through the given horizontal list as we look
for breakpoints. This variable is global, since it is used both by |line_break|
and by its subprocedure |try_break|.

Another global variable called |threshold| is used to determine the feasibility
of individual lines: breakpoints are feasible if there is a way to reach
them without creating lines whose badness exceeds |threshold|.  (The
badness is compared to |threshold| before penalties are added, so that
penalty values do not affect the feasibility of breakpoints, except that
no break is allowed when the penalty is 10000 or more.) If |threshold|
is 10000 or more, all legal breaks are considered feasible, since the
|badness| function specified above never returns a value greater than~10000.

Up to three passes might be made through the paragraph in an attempt to find at
least one set of feasible breakpoints. On the first pass, we have
|threshold=pretolerance| and |second_pass=final_pass=false|.
If this pass fails to find a
feasible solution, |threshold| is set to |tolerance|, |second_pass| is set
|true|, and an attempt is made to hyphenate as many words as possible.
If that fails too, we add |emergency_stretch| to the background
stretchability and set |final_pass=true|.

@<Glob...@>=
@!cur_p:pointer; {the current breakpoint under consideration}
@!second_pass:boolean; {is this our second attempt to break this paragraph?}
@!final_pass:boolean; {is this our final attempt to break this paragraph?}
@!threshold:integer; {maximum badness on feasible lines}

@ The heart of the line-breaking procedure is `|try_break|', a subroutine
that tests if the current breakpoint |cur_p| is feasible, by running
through the active list to see what lines of text can be made from active
nodes to~|cur_p|.  If feasible breaks are possible, new break nodes are
created.  If |cur_p| is too far from an active node, that node is
deactivated.

The parameter |pi| to |try_break| is the penalty associated
with a break at |cur_p|; we have |pi=eject_penalty| if the break is forced,
and |pi=inf_penalty| if the break is illegal.

The other parameter, |break_type|, is set to |hyphenated| or |unhyphenated|,
depending on whether or not the current break is at a |disc_node|. The
end of a paragraph is also regarded as `|hyphenated|'; this case is
distinguishable by the condition |cur_p=null|.

@d copy_to_cur_active(#)==cur_active_width[#]:=active_width[#]
@d deactivate=60 {go here when node |r| should be deactivated}

@<Declare subprocedures for |line_break|@>=
procedure try_break(@!pi:integer;@!break_type:small_number);
label exit,done,done1,continue,deactivate;
var r:pointer; {runs through the active list}
@!prev_r:pointer; {stays a step behind |r|}
@!old_l:halfword; {maximum line number in current equivalence class of lines}
@!no_break_yet:boolean; {have we found a feasible break at |cur_p|?}
@<Other local variables for |try_break|@>@;
begin @<Make sure that |pi| is in the proper range@>;
no_break_yet:=true; prev_r:=active; old_l:=0;
do_all_six(copy_to_cur_active);
loop@+  begin continue: r:=link(prev_r);
  @<If node |r| is of type |delta_node|, update |cur_active_width|,
    set |prev_r| and |prev_prev_r|, then |goto continue|@>;
  @<If a line number class has ended, create new active nodes for
    the best feasible breaks in that class; then |return|
    if |r=last_active|, otherwise compute the new |line_width|@>;
  @<Consider the demerits for a line from |r| to |cur_p|;
    deactivate node |r| if it should no longer be active;
    then |goto continue| if a line from |r| to |cur_p| is infeasible,
    otherwise record a new feasible break@>;
  end;
exit: @!stat @<Update the value of |printed_node| for
  symbolic displays@>@+tats@;
end;

@ @<Other local variables for |try_break|@>=
@!prev_prev_r:pointer; {a step behind |prev_r|, if |type(prev_r)=delta_node|}
@!s:pointer; {runs through nodes ahead of |cur_p|}
@!q:pointer; {points to a new node being created}
@!v:pointer; {points to a glue specification or a node ahead of |cur_p|}
@!t:integer; {node count, if |cur_p| is a discretionary node}
@!f:internal_font_number; {used in character width calculation}
@!l:halfword; {line number of current active node}
@!node_r_stays_active:boolean; {should node |r| remain in the active list?}
@!line_width:scaled; {the current line will be justified to this width}
@!fit_class:very_loose_fit..tight_fit; {possible fitness class of test line}
@!b:halfword; {badness of test line}
@!d:integer; {demerits of test line}
@!artificial_demerits:boolean; {has |d| been forced to zero?}
@!save_link:pointer; {temporarily holds value of |link(cur_p)|}
@!shortfall:scaled; {used in badness calculations}

@ @<Make sure that |pi| is in the proper range@>=
if abs(pi)>=inf_penalty then
  if pi>0 then return {this breakpoint is inhibited by infinite penalty}
  else pi:=eject_penalty {this breakpoint will be forced}

@ The following code uses the fact that |type(last_active)<>delta_node|.

@d update_width(#)==@|
  cur_active_width[#]:=cur_active_width[#]+mem[r+#].sc

@<If node |r|...@>=
@^inner loop@>
if type(r)=delta_node then
  begin do_all_six(update_width);
  prev_prev_r:=prev_r; prev_r:=r; goto continue;
  end

@ As we consider various ways to end a line at |cur_p|, in a given line number
class, we keep track of the best total demerits known, in an array with
one entry for each of the fitness classifications. For example,
|minimal_demerits[tight_fit]| contains the fewest total demerits of feasible
line breaks ending at |cur_p| with a |tight_fit| line; |best_place[tight_fit]|
points to the passive node for the break before~|cur_p| that achieves such
an optimum; and |best_pl_line[tight_fit]| is the |line_number| field in the
active node corresponding to |best_place[tight_fit]|. When no feasible break
sequence is known, the |minimal_demerits| entries will be equal to
|awful_bad|, which is $2^{30}-1$. Another variable, |minimum_demerits|,
keeps track of the smallest value in the |minimal_demerits| array.

@d awful_bad==@'7777777777 {more than a billion demerits}

@<Global...@>=
@!minimal_demerits:array[very_loose_fit..tight_fit] of integer; {best total
  demerits known for current line class and position, given the fitness}
@!minimum_demerits:integer; {best total demerits known for current line class
  and position}
@!best_place:array[very_loose_fit..tight_fit] of pointer; {how to achieve
  |minimal_demerits|}
@!best_pl_line:array[very_loose_fit..tight_fit] of halfword; {corresponding
  line number}

@ @<Get ready to start...@>=
minimum_demerits:=awful_bad;
minimal_demerits[tight_fit]:=awful_bad;
minimal_demerits[decent_fit]:=awful_bad;
minimal_demerits[loose_fit]:=awful_bad;
minimal_demerits[very_loose_fit]:=awful_bad;

@ The first part of the following code is part of \TeX's inner loop, so
we don't want to waste any time. The current active node, namely node |r|,
contains the line number that will be considered next. At the end of the
list we have arranged the data structure so that |r=last_active| and
|line_number(last_active)>old_l|.
@^inner loop@>

@<If a line number class...@>=
begin l:=line_number(r);
if l>old_l then
  begin {now we are no longer in the inner loop}
  if (minimum_demerits<awful_bad)and@|
      ((old_l<>easy_line)or(r=last_active)) then
    @<Create new active nodes for the best feasible breaks
      just found@>;
  if r=last_active then return;
  @<Compute the new line width@>;
  end;
end

@ It is not necessary to create new active nodes having |minimal_demerits|
greater than
|minimum_demerits+abs(adj_demerits)|, since such active nodes will never
be chosen in the final paragraph breaks. This observation allows us to
omit a substantial number of feasible breakpoints from further consideration.

@<Create new active nodes...@>=
begin if no_break_yet then @<Compute the values of |break_width|@>;
@<Insert a delta node to prepare for breaks at |cur_p|@>;
if abs(adj_demerits)>=awful_bad-minimum_demerits then
  minimum_demerits:=awful_bad-1
else minimum_demerits:=minimum_demerits+abs(adj_demerits);
for fit_class:=very_loose_fit to tight_fit do
  begin if minimal_demerits[fit_class]<=minimum_demerits then
    @<Insert a new active node
      from |best_place[fit_class]| to |cur_p|@>;
  minimal_demerits[fit_class]:=awful_bad;
  end;
minimum_demerits:=awful_bad;
@<Insert a delta node to prepare for the next active node@>;
end

@ When we insert a new active node for a break at |cur_p|, suppose this
new node is to be placed just before active node |a|; then we essentially
want to insert `$\delta\,|cur_p|\,\delta^\prime$' before |a|, where
$\delta=\alpha(a)-\alpha(|cur_p|)$ and $\delta^\prime=\alpha(|cur_p|)-\alpha(a)$
in the notation explained above.  The |cur_active_width| array now holds
$\gamma+\beta(|cur_p|)-\alpha(a)$; so $\delta$ can be obtained by
subtracting |cur_active_width| from the quantity $\gamma+\beta(|cur_p|)-
\alpha(|cur_p|)$. The latter quantity can be regarded as the length of a
line ``from |cur_p| to |cur_p|''; we call it the |break_width| at |cur_p|.

The |break_width| is usually negative, since it consists of the background
(which is normally zero) minus the width of nodes following~|cur_p| that are
eliminated after a break. If, for example, node |cur_p| is a glue node, the
width of this glue is subtracted from the background; and we also look
ahead to eliminate all subsequent glue and penalty and kern and math
nodes, subtracting their widths as well.

Kern nodes do not disappear at a line break unless they are |explicit|.

@d set_break_width_to_background(#)==break_width[#]:=background[#]

@<Compute the values of |break...@>=
begin no_break_yet:=false; do_all_six(set_break_width_to_background);
s:=cur_p;
if break_type>unhyphenated then if cur_p<>null then
  @<Compute the discretionary |break_width| values@>;
while s<>null do
  begin if is_char_node(s) then goto done;
  case type(s) of
  glue_node:@<Subtract glue from |break_width|@>;
  penalty_node: do_nothing;
  math_node: break_width[1]:=break_width[1]-width(s);
  kern_node: if subtype(s)<>explicit then goto done
    else break_width[1]:=break_width[1]-width(s);
  othercases goto done
  endcases;@/
  s:=link(s);
  end;
done: end

@ @<Subtract glue from |break...@>=
begin v:=glue_ptr(s); break_width[1]:=break_width[1]-width(v);
break_width[2+stretch_order(v)]:=break_width[2+stretch_order(v)]-stretch(v);
break_width[6]:=break_width[6]-shrink(v);
end

@ When |cur_p| is a discretionary break, the length of a line ``from |cur_p| to
|cur_p|'' has to be defined properly so that the other calculations work out.
Suppose that the pre-break text at |cur_p| has length $l_0$, the post-break
text has length $l_1$, and the replacement text has length |l|. Suppose
also that |q| is the node following the replacement text. Then length of a
line from |cur_p| to |q| will be computed as $\gamma+\beta(q)-\alpha(|cur_p|)$,
where $\beta(q)=\beta(|cur_p|)-l_0+l$. The actual length will be the background
plus $l_1$, so the length from |cur_p| to |cur_p| should be $\gamma+l_0+l_1-l$.
If the post-break text of the discretionary is empty, a break may also
discard~|q|; in that unusual case we subtract the length of~|q| and any
other nodes that will be discarded after the discretionary break.

The value of $l_0$ need not be computed, since |line_break| will put
it into the global variable |disc_width| before calling |try_break|.

@<Glob...@>=
@!disc_width:scaled; {the length of discretionary material preceding a break}

@ @<Compute the discretionary |break...@>=
begin t:=replace_count(cur_p); v:=cur_p; s:=post_break(cur_p);
while t>0 do
  begin decr(t); v:=link(v);
  @<Subtract the width of node |v| from |break_width|@>;
  end;
while s<>null do
  begin @<Add the width of node |s| to |break_width|@>;
  s:=link(s);
  end;
break_width[1]:=break_width[1]+disc_width;
if post_break(cur_p)=null then s:=link(v);
          {nodes may be discardable after the break}
end

@ Replacement texts and discretionary texts are supposed to contain
only character nodes, kern nodes, ligature nodes, and box or rule nodes.

@<Subtract the width of node |v|...@>=
if is_char_node(v) then
  begin f:=font(v);
  break_width[1]:=break_width[1]-char_width(f)(char_info(f)(character(v)));
  end
else  case type(v) of
  ligature_node: begin f:=font(lig_char(v));@/
    break_width[1]:=@|break_width[1]-
      char_width(f)(char_info(f)(character(lig_char(v))));
    end;
  hlist_node,vlist_node,rule_node,kern_node:
    break_width[1]:=break_width[1]-width(v);
  othercases confusion("disc1")
@:this can't happen disc1}{\quad disc1@>
  endcases

@ @<Add the width of node |s| to |b...@>=
if is_char_node(s) then
  begin f:=font(s);
  break_width[1]:=@|break_width[1]+char_width(f)(char_info(f)(character(s)));
  end
else  case type(s) of
  ligature_node: begin f:=font(lig_char(s));
    break_width[1]:=break_width[1]+
      char_width(f)(char_info(f)(character(lig_char(s))));
    end;
  hlist_node,vlist_node,rule_node,kern_node:
    break_width[1]:=break_width[1]+width(s);
  othercases confusion("disc2")
@:this can't happen disc2}{\quad disc2@>
  endcases

@ We use the fact that |type(active)<>delta_node|.

@d convert_to_break_width(#)==@|
  mem[prev_r+#].sc:=@|@t\hskip10pt@>mem[prev_r+#].sc
  -cur_active_width[#]+break_width[#]
@d store_break_width(#)==active_width[#]:=break_width[#]
@d new_delta_to_break_width(#)==@|
  mem[q+#].sc:=break_width[#]-cur_active_width[#]

@<Insert a delta node to prepare for breaks at |cur_p|@>=
if type(prev_r)=delta_node then {modify an existing delta node}
  begin do_all_six(convert_to_break_width);
  end
else if prev_r=active then {no delta node needed at the beginning}
  begin do_all_six(store_break_width);
  end
else  begin q:=get_node(delta_node_size); link(q):=r; type(q):=delta_node;@/
  subtype(q):=0; {the |subtype| is not used}
  do_all_six(new_delta_to_break_width);
  link(prev_r):=q; prev_prev_r:=prev_r; prev_r:=q;
  end

@ When the following code is performed, we will have just inserted at
least one active node before |r|, so |type(prev_r)<>delta_node|.

@d new_delta_from_break_width(#)==@|mem[q+#].sc:=
    cur_active_width[#]-break_width[#]

@<Insert a delta node to prepare for the next active node@>=
if r<>last_active then
  begin q:=get_node(delta_node_size); link(q):=r; type(q):=delta_node;@/
  subtype(q):=0; {the |subtype| is not used}
  do_all_six(new_delta_from_break_width);
  link(prev_r):=q; prev_prev_r:=prev_r; prev_r:=q;
  end

@ When we create an active node, we also create the corresponding
passive node.

@<Insert a new active node from |best_place[fit_class]| to |cur_p|@>=
begin q:=get_node(passive_node_size);
link(q):=passive; passive:=q; cur_break(q):=cur_p;
@!stat incr(pass_number); serial(q):=pass_number;@+tats@;@/
prev_break(q):=best_place[fit_class];@/
q:=get_node(active_node_size); break_node(q):=passive;
line_number(q):=best_pl_line[fit_class]+1;
fitness(q):=fit_class; type(q):=break_type;
total_demerits(q):=minimal_demerits[fit_class];
link(q):=r; link(prev_r):=q; prev_r:=q;
@!stat if tracing_paragraphs>0 then
  @<Print a symbolic description of the new break node@>;
tats@;@/
end

@ @<Print a symbolic description of the new break node@>=
begin print_nl("@@@@"); print_int(serial(passive));
@.\AT!\AT!@>
print(": line "); print_int(line_number(q)-1);
print_char("."); print_int(fit_class);
if break_type=hyphenated then print_char("-");
print(" t="); print_int(total_demerits(q));
print(" -> @@@@");
if prev_break(passive)=null then print_char("0")
else print_int(serial(prev_break(passive)));
end

@ The length of lines depends on whether the user has specified
\.{\\parshape} or \.{\\hangindent}. If |par_shape_ptr| is not null, it
points to a $(2n+1)$-word record in |mem|, where the |info| in the first
word contains the value of |n|, and the other $2n$ words contain the left
margins and line lengths for the first |n| lines of the paragraph; the
specifications for line |n| apply to all subsequent lines. If
|par_shape_ptr=null|, the shape of the paragraph depends on the value of
|n=hang_after|; if |n>=0|, hanging indentation takes place on lines |n+1|,
|n+2|, \dots, otherwise it takes place on lines 1, \dots, $\vert
n\vert$. When hanging indentation is active, the left margin is
|hang_indent|, if |hang_indent>=0|, else it is 0; the line length is
$|hsize|-\vert|hang_indent|\vert$. The normal setting is
|par_shape_ptr=null|, |hang_after=1|, and |hang_indent=0|.
Note that if |hang_indent=0|, the value of |hang_after| is irrelevant.
@^length of lines@> @^hanging indentation@>

@<Glob...@>=
@!easy_line:halfword; {line numbers |>easy_line| are equivalent in break nodes}
@!last_special_line:halfword; {line numbers |>last_special_line| all have
  the same width}
@!first_width:scaled; {the width of all lines |<=last_special_line|, if
  no \.{\\parshape} has been specified}
@!second_width:scaled; {the width of all lines |>last_special_line|}
@!first_indent:scaled; {left margin to go with |first_width|}
@!second_indent:scaled; {left margin to go with |second_width|}

@ We compute the values of |easy_line| and the other local variables relating
to line length when the |line_break| procedure is initializing itself.

@<Get ready to start...@>=
if par_shape_ptr=null then
  if hang_indent=0 then
    begin last_special_line:=0; second_width:=hsize;
    second_indent:=0;
    end
  else @<Set line length parameters in preparation for hanging indentation@>
else  begin last_special_line:=info(par_shape_ptr)-1;
  second_width:=mem[par_shape_ptr+2*(last_special_line+1)].sc;
  second_indent:=mem[par_shape_ptr+2*last_special_line+1].sc;
  end;
if looseness=0 then easy_line:=last_special_line
else easy_line:=max_halfword

@ @<Set line length parameters in preparation for hanging indentation@>=
begin last_special_line:=abs(hang_after);
if hang_after<0 then
  begin first_width:=hsize-abs(hang_indent);
  if hang_indent>=0 then first_indent:=hang_indent
  else first_indent:=0;
  second_width:=hsize; second_indent:=0;
  end
else  begin first_width:=hsize; first_indent:=0;
  second_width:=hsize-abs(hang_indent);
  if hang_indent>=0 then second_indent:=hang_indent
  else second_indent:=0;
  end;
end

@ When we come to the following code, we have just encountered the first
active node~|r| whose |line_number| field contains |l|. Thus we want to
compute the length of the $l\mskip1mu$th line of the current paragraph. Furthermore,
we want to set |old_l| to the last number in the class of line numbers
equivalent to~|l|.

@<Compute the new line width@>=
if l>easy_line then
  begin line_width:=second_width; old_l:=max_halfword-1;
  end
else  begin old_l:=l;
  if l>last_special_line then line_width:=second_width
  else if par_shape_ptr=null then line_width:=first_width
  else line_width:=mem[par_shape_ptr+2*l@,].sc;
  end

@ The remaining part of |try_break| deals with the calculation of
demerits for a break from |r| to |cur_p|.

The first thing to do is calculate the badness, |b|. This value will always
be between zero and |inf_bad+1|; the latter value occurs only in the
case of lines from |r| to |cur_p| that cannot shrink enough to fit the necessary
width. In such cases, node |r| will be deactivated.
We also deactivate node~|r| when a break at~|cur_p| is forced, since future
breaks must go through a forced break.

@<Consider the demerits for a line from |r| to |cur_p|...@>=
begin artificial_demerits:=false;@/
@^inner loop@>
shortfall:=line_width-cur_active_width[1]; {we're this much too short}
if shortfall>0 then
  @<Set the value of |b| to the badness for stretching the line,
    and compute the corresponding |fit_class|@>
else @<Set the value of |b| to the badness for shrinking the line,
    and compute the corresponding |fit_class|@>;
if (b>inf_bad)or(pi=eject_penalty) then
  @<Prepare to deactivate node~|r|, and |goto deactivate| unless
    there is a reason to consider lines of text from |r| to |cur_p|@>
else  begin prev_r:=r;
  if b>threshold then goto continue;
  node_r_stays_active:=true;
  end;
@<Record a new feasible break@>;
if node_r_stays_active then goto continue; {|prev_r| has been set to |r|}
deactivate: @<Deactivate node |r|@>;
end

@ When a line must stretch, the available stretchability can be found in the
subarray |cur_active_width[2..5]|, in units of points, fil, fill, and filll.

The present section is part of \TeX's inner loop, and it is most often performed
when the badness is infinite; therefore it is worth while to make a quick
test for large width excess and small stretchability, before calling the
|badness| subroutine.
@^inner loop@>

@<Set the value of |b| to the badness for stretching...@>=
if (cur_active_width[3]<>0)or(cur_active_width[4]<>0)or@|
  (cur_active_width[5]<>0) then
  begin b:=0; fit_class:=decent_fit; {infinite stretch}
  end
else  begin if shortfall>7230584 then if cur_active_width[2]<1663497 then
    begin b:=inf_bad; fit_class:=very_loose_fit; goto done1;
    end;
  b:=badness(shortfall,cur_active_width[2]);
  if b>12 then
    if b>99 then fit_class:=very_loose_fit
    else fit_class:=loose_fit
  else fit_class:=decent_fit;
  done1:
  end

@ Shrinkability is never infinite in a paragraph;
we can shrink the line from |r| to |cur_p| by at most |cur_active_width[6]|.

@<Set the value of |b| to the badness for shrinking...@>=
begin if -shortfall>cur_active_width[6] then b:=inf_bad+1
else b:=badness(-shortfall,cur_active_width[6]);
if b>12 then fit_class:=tight_fit@+else fit_class:=decent_fit;
end

@ During the final pass, we dare not lose all active nodes, lest we lose
touch with the line breaks already found. The code shown here makes sure
that such a catastrophe does not happen, by permitting overfull boxes as
a last resort. This particular part of \TeX\ was a source of several subtle
bugs before the correct program logic was finally discovered; readers
who seek to ``improve'' \TeX\ should therefore think thrice before daring
to make any changes here.
@^overfull boxes@>

@<Prepare to deactivate node~|r|, and |goto deactivate| unless...@>=
begin if final_pass and (minimum_demerits=awful_bad) and@|
   (link(r)=last_active) and
   (prev_r=active) then
  artificial_demerits:=true {set demerits zero, this break is forced}
else if b>threshold then goto deactivate;
node_r_stays_active:=false;
end

@ When we get to this part of the code, the line from |r| to |cur_p| is
feasible, its badness is~|b|, and its fitness classification is |fit_class|.
We don't want to make an active node for this break yet, but we will
compute the total demerits and record them in the |minimal_demerits| array,
if such a break is the current champion among all ways to get to |cur_p|
in a given line-number class and fitness class.

@<Record a new feasible break@>=
if artificial_demerits then d:=0
else @<Compute the demerits, |d|, from |r| to |cur_p|@>;
@!stat if tracing_paragraphs>0 then
  @<Print a symbolic description of this feasible break@>;
tats@;@/
d:=d+total_demerits(r); {this is the minimum total demerits
  from the beginning to |cur_p| via |r|}
if d<=minimal_demerits[fit_class] then
  begin minimal_demerits[fit_class]:=d;
  best_place[fit_class]:=break_node(r); best_pl_line[fit_class]:=l;
  if d<minimum_demerits then minimum_demerits:=d;
  end

@ @<Print a symbolic description of this feasible break@>=
begin if printed_node<>cur_p then
  @<Print the list between |printed_node| and |cur_p|,
    then set |printed_node:=cur_p|@>;
print_nl("@@");
@.\AT!@>
if cur_p=null then print_esc("par")
else if type(cur_p)<>glue_node then
  begin if type(cur_p)=penalty_node then print_esc("penalty")
  else if type(cur_p)=disc_node then print_esc("discretionary")
  else if type(cur_p)=kern_node then print_esc("kern")
  else print_esc("math");
  end;
print(" via @@@@");
if break_node(r)=null then print_char("0")
else print_int(serial(break_node(r)));
print(" b=");
if b>inf_bad then print_char("*")@+else print_int(b);
@.*\relax@>
print(" p="); print_int(pi); print(" d=");
if artificial_demerits then print_char("*")@+else print_int(d);
end

@ @<Print the list between |printed_node| and |cur_p|...@>=
begin print_nl("");
if cur_p=null then short_display(link(printed_node))
else  begin save_link:=link(cur_p);
  link(cur_p):=null; print_nl(""); short_display(link(printed_node));
  link(cur_p):=save_link;
  end;
printed_node:=cur_p;
end

@ When the data for a discretionary break is being displayed, we will have
printed the |pre_break| and |post_break| lists; we want to skip over the
third list, so that the discretionary data will not appear twice.  The
following code is performed at the very end of |try_break|.

@<Update the value of |printed_node|...@>=
if cur_p=printed_node then if cur_p<>null then if type(cur_p)=disc_node then
  begin t:=replace_count(cur_p);
  while t>0 do
    begin decr(t); printed_node:=link(printed_node);
    end;
  end

@ @<Compute the demerits, |d|, from |r| to |cur_p|@>=
begin d:=line_penalty+b;
if abs(d)>=10000 then d:=100000000@+else d:=d*d;
if pi<>0 then
  if pi>0 then d:=d+pi*pi
  else if pi>eject_penalty then d:=d-pi*pi;
if (break_type=hyphenated)and(type(r)=hyphenated) then
  if cur_p<>null then d:=d+double_hyphen_demerits
  else d:=d+final_hyphen_demerits;
if abs(fit_class-fitness(r))>1 then d:=d+adj_demerits;
end

@ When an active node disappears, we must delete an adjacent delta node if the
active node was at the beginning or the end of the active list, or if it
was surrounded by delta nodes. We also must preserve the property that
|cur_active_width| represents the length of material from |link(prev_r)|
to~|cur_p|.

@d combine_two_deltas(#)==@|mem[prev_r+#].sc:=mem[prev_r+#].sc+mem[r+#].sc
@d downdate_width(#)==@|cur_active_width[#]:=cur_active_width[#]-
  mem[prev_r+#].sc

@<Deactivate node |r|@>=
link(prev_r):=link(r); free_node(r,active_node_size);
if prev_r=active then @<Update the active widths, since the first active
  node has been deleted@>
else if type(prev_r)=delta_node then
  begin r:=link(prev_r);
  if r=last_active then
    begin do_all_six(downdate_width);
    link(prev_prev_r):=last_active;
    free_node(prev_r,delta_node_size); prev_r:=prev_prev_r;
    end
  else if type(r)=delta_node then
    begin do_all_six(update_width);
    do_all_six(combine_two_deltas);
    link(prev_r):=link(r); free_node(r,delta_node_size);
    end;
  end

@ The following code uses the fact that |type(last_active)<>delta_node|. If the
active list has just become empty, we do not need to update the
|active_width| array, since it will be initialized when an active
node is next inserted.

@d update_active(#)==active_width[#]:=active_width[#]+mem[r+#].sc

@<Update the active widths,...@>=
begin r:=link(active);
if type(r)=delta_node then
  begin do_all_six(update_active);
  do_all_six(copy_to_cur_active);
  link(active):=link(r); free_node(r,delta_node_size);
  end;
end

@* \[39] Breaking paragraphs into lines, continued.
So far we have gotten a little way into the |line_break| routine, having
covered its important |try_break| subroutine. Now let's consider the
rest of the process.

The main loop of |line_break| traverses the given hlist,
starting at |link(temp_head)|, and calls |try_break| at each legal
breakpoint. A variable called |auto_breaking| is set to true except
within math formulas, since glue nodes are not legal breakpoints when
they appear in formulas.

The current node of interest in the hlist is pointed to by |cur_p|. Another
variable, |prev_p|, is usually one step behind |cur_p|, but the real
meaning of |prev_p| is this: If |type(cur_p)=glue_node| then |cur_p| is a legal
breakpoint if and only if |auto_breaking| is true and |prev_p| does not
point to a glue node, penalty node, explicit kern node, or math node.

The following declarations provide for a few other local variables that are
used in special calculations.

@<Local variables for line breaking@>=
@!auto_breaking:boolean; {is node |cur_p| outside a formula?}
@!prev_p:pointer; {helps to determine when glue nodes are breakpoints}
@!q,@!r,@!s,@!prev_s:pointer; {miscellaneous nodes of temporary interest}
@!f:internal_font_number; {used when calculating character widths}

@ The `\ignorespaces|loop|\unskip' in the following code is performed at most
thrice per call of |line_break|, since it is actually a pass over the
entire paragraph.

@<Find optimal breakpoints@>=
threshold:=pretolerance;
if threshold>=0 then
  begin @!stat if tracing_paragraphs>0 then
    begin begin_diagnostic; print_nl("@@firstpass");@+end;@;@+tats@;@/
  second_pass:=false; final_pass:=false;
  end
else  begin threshold:=tolerance; second_pass:=true;
  final_pass:=(emergency_stretch<=0);
  @!stat if tracing_paragraphs>0 then begin_diagnostic;@+tats@;
  end;
loop@+  begin if threshold>inf_bad then threshold:=inf_bad;
  if second_pass then @<Initialize for hyphenating a paragraph@>;
  @<Create an active breakpoint representing the beginning of the paragraph@>;
  cur_p:=link(temp_head); auto_breaking:=true;@/
  prev_p:=cur_p; {glue at beginning is not a legal breakpoint}
  while (cur_p<>null)and(link(active)<>last_active) do
    @<Call |try_break| if |cur_p| is a legal breakpoint;
    on the second pass, also try to hyphenate the next
    word, if |cur_p| is a glue node;
    then advance |cur_p| to the next node of the paragraph
    that could possibly be a legal breakpoint@>;
  if cur_p=null then
    @<Try the final line break at the end of the paragraph,
    and |goto done| if the desired breakpoints have been found@>;
  @<Clean up the memory by removing the break nodes@>;
  if not second_pass then
    begin@!stat if tracing_paragraphs>0 then print_nl("@@secondpass");@;@+tats@/
    threshold:=tolerance; second_pass:=true; final_pass:=(emergency_stretch<=0);
    end {if at first you don't succeed, \dots}
  else begin @!stat if tracing_paragraphs>0 then
      print_nl("@@emergencypass");@;@+tats@/
    background[2]:=background[2]+emergency_stretch; final_pass:=true;
    end;
  end;
done: @!stat if tracing_paragraphs>0 then
  begin end_diagnostic(true); normalize_selector;
  end;@+tats@/

@ The active node that represents the starting point does not need a
corresponding passive node.

@d store_background(#)==active_width[#]:=background[#]

@<Create an active breakpoint representing the beginning of the paragraph@>=
q:=get_node(active_node_size);
type(q):=unhyphenated; fitness(q):=decent_fit;
link(q):=last_active; break_node(q):=null;
line_number(q):=prev_graf+1; total_demerits(q):=0; link(active):=q;
do_all_six(store_background);@/
passive:=null; printed_node:=temp_head; pass_number:=0;
font_in_short_display:=null_font

@ @<Clean...@>=
q:=link(active);
while q<>last_active do
  begin cur_p:=link(q);
  if type(q)=delta_node then free_node(q,delta_node_size)
  else free_node(q,active_node_size);
  q:=cur_p;
  end;
q:=passive;
while q<>null do
  begin cur_p:=link(q);
  free_node(q,passive_node_size);
  q:=cur_p;
  end

@ Here is the main switch in the |line_break| routine, where legal breaks
are determined. As we move through the hlist, we need to keep the |active_width|
array up to date, so that the badness of individual lines is readily calculated
by |try_break|. It is convenient to use the short name |act_width| for
the component of active width that represents real width as opposed to glue.

@d act_width==active_width[1] {length from first active node to current node}
@d kern_break==begin if not is_char_node(link(cur_p)) and auto_breaking then
    if type(link(cur_p))=glue_node then try_break(0,unhyphenated);
  act_width:=act_width+width(cur_p);
  end

@<Call |try_break| if |cur_p| is a legal breakpoint...@>=
begin if is_char_node(cur_p) then
  @<Advance \(c)|cur_p| to the node following the present
    string of characters@>;
case type(cur_p) of
hlist_node,vlist_node,rule_node: act_width:=act_width+width(cur_p);
whatsit_node: @<Advance \(p)past a whatsit node in the \(l)|line_break| loop@>;
glue_node: begin @<If node |cur_p| is a legal breakpoint, call |try_break|;
  then update the active widths by including the glue in |glue_ptr(cur_p)|@>;
  if second_pass and auto_breaking then
    @<Try to hyphenate the following word@>;
  end;
kern_node: if subtype(cur_p)=explicit then kern_break
  else act_width:=act_width+width(cur_p);
ligature_node: begin f:=font(lig_char(cur_p));
  act_width:=act_width+char_width(f)(char_info(f)(character(lig_char(cur_p))));
  end;
disc_node: @<Try to break after a discretionary fragment, then |goto done5|@>;
math_node: begin auto_breaking:=(subtype(cur_p)=after); kern_break;
  end;
penalty_node: try_break(penalty(cur_p),unhyphenated);
mark_node,ins_node,adjust_node: do_nothing;
othercases confusion("paragraph")
@:this can't happen paragraph}{\quad paragraph@>
endcases;@/
prev_p:=cur_p; cur_p:=link(cur_p);
done5:end

@ The code that passes over the characters of words in a paragraph is
part of \TeX's inner loop, so it has been streamlined for speed. We use
the fact that `\.{\\parfillskip}' glue appears at the end of each paragraph;
it is therefore unnecessary to check if |link(cur_p)=null| when |cur_p| is a
character node.
@^inner loop@>

@<Advance \(c)|cur_p| to the node following the present string...@>=
begin prev_p:=cur_p;
repeat f:=font(cur_p);
act_width:=act_width+char_width(f)(char_info(f)(character(cur_p)));
cur_p:=link(cur_p);
until not is_char_node(cur_p);
end

@ When node |cur_p| is a glue node, we look at |prev_p| to see whether or not
a breakpoint is legal at |cur_p|, as explained above.

@<If node |cur_p| is a legal breakpoint, call...@>=
if auto_breaking then
  begin if is_char_node(prev_p) then try_break(0,unhyphenated)
  else if precedes_break(prev_p) then try_break(0,unhyphenated)
  else if (type(prev_p)=kern_node)and(subtype(prev_p)<>explicit) then
    try_break(0,unhyphenated);
  end;
check_shrinkage(glue_ptr(cur_p)); q:=glue_ptr(cur_p);
act_width:=act_width+width(q);@|
active_width[2+stretch_order(q)]:=@|
  active_width[2+stretch_order(q)]+stretch(q);@/
active_width[6]:=active_width[6]+shrink(q)

@ The following code knows that discretionary texts contain
only character nodes, kern nodes, box nodes, rule nodes, and ligature nodes.

@<Try to break after a discretionary fragment...@>=
begin s:=pre_break(cur_p); disc_width:=0;
if s=null then try_break(ex_hyphen_penalty,hyphenated)
else  begin repeat @<Add the width of node |s| to |disc_width|@>;
    s:=link(s);
  until s=null;
  act_width:=act_width+disc_width;
  try_break(hyphen_penalty,hyphenated);
  act_width:=act_width-disc_width;
  end;
r:=replace_count(cur_p); s:=link(cur_p);
while r>0 do
  begin @<Add the width of node |s| to |act_width|@>;
  decr(r); s:=link(s);
  end;
prev_p:=cur_p; cur_p:=s; goto done5;
end

@ @<Add the width of node |s| to |disc_width|@>=
if is_char_node(s) then
  begin f:=font(s);
  disc_width:=disc_width+char_width(f)(char_info(f)(character(s)));
  end
else  case type(s) of
  ligature_node: begin f:=font(lig_char(s));
    disc_width:=disc_width+
      char_width(f)(char_info(f)(character(lig_char(s))));
    end;
  hlist_node,vlist_node,rule_node,kern_node:
    disc_width:=disc_width+width(s);
  othercases confusion("disc3")
@:this can't happen disc3}{\quad disc3@>
  endcases

@ @<Add the width of node |s| to |act_width|@>=
if is_char_node(s) then
  begin f:=font(s);
  act_width:=act_width+char_width(f)(char_info(f)(character(s)));
  end
else  case type(s) of
  ligature_node: begin f:=font(lig_char(s));
    act_width:=act_width+
      char_width(f)(char_info(f)(character(lig_char(s))));
    end;
  hlist_node,vlist_node,rule_node,kern_node:
    act_width:=act_width+width(s);
  othercases confusion("disc4")
@:this can't happen disc4}{\quad disc4@>
  endcases

@ The forced line break at the paragraph's end will reduce the list of
breakpoints so that all active nodes represent breaks at |cur_p=null|.
On the first pass, we insist on finding an active node that has the
correct ``looseness.'' On the final pass, there will be at least one active
node, and we will match the desired looseness as well as we can.

The global variable |best_bet| will be set to the active node for the best
way to break the paragraph, and a few other variables are used to
help determine what is best.

@<Glob...@>=
@!best_bet:pointer; {use this passive node and its predecessors}
@!fewest_demerits:integer; {the demerits associated with |best_bet|}
@!best_line:halfword; {line number following the last line of the new paragraph}
@!actual_looseness:integer; {the difference between |line_number(best_bet)|
  and the optimum |best_line|}
@!line_diff:integer; {the difference between the current line number and
  the optimum |best_line|}

@ @<Try the final line break at the end of the paragraph...@>=
begin try_break(eject_penalty,hyphenated);
if link(active)<>last_active then
  begin @<Find an active node with fewest demerits@>;
  if looseness=0 then goto done;
  @<Find the best active node for the desired looseness@>;
  if (actual_looseness=looseness)or final_pass then goto done;
  end;
end

@ @<Find an active node...@>=
r:=link(active); fewest_demerits:=awful_bad;
repeat if type(r)<>delta_node then if total_demerits(r)<fewest_demerits then
  begin fewest_demerits:=total_demerits(r); best_bet:=r;
  end;
r:=link(r);
until r=last_active;
best_line:=line_number(best_bet)

@ The adjustment for a desired looseness is a slightly more complicated
version of the loop just considered. Note that if a paragraph is broken
into segments by displayed equations, each segment will be subject to the
looseness calculation, independently of the other segments.

@<Find the best active node...@>=
begin r:=link(active); actual_looseness:=0;
repeat if type(r)<>delta_node then
  begin line_diff:=line_number(r)-best_line;
  if ((line_diff<actual_looseness)and(looseness<=line_diff))or@|
  ((line_diff>actual_looseness)and(looseness>=line_diff)) then
    begin best_bet:=r; actual_looseness:=line_diff;
    fewest_demerits:=total_demerits(r);
    end
  else if (line_diff=actual_looseness)and@|
    (total_demerits(r)<fewest_demerits) then
    begin best_bet:=r; fewest_demerits:=total_demerits(r);
    end;
  end;
r:=link(r);
until r=last_active;
best_line:=line_number(best_bet);
end

@ Once the best sequence of breakpoints has been found (hurray), we call on the
procedure |post_line_break| to finish the remainder of the work.
(By introducing this subprocedure, we are able to keep |line_break|
from getting extremely long.)

@<Break the paragraph at the chosen...@>=
post_line_break(final_widow_penalty)

@ The total number of lines that will be set by |post_line_break|
is |best_line-prev_graf-1|. The last breakpoint is specified by
|break_node(best_bet)|, and this passive node points to the other breakpoints
via the |prev_break| links. The finishing-up phase starts by linking the
relevant passive nodes in forward order, changing |prev_break| to
|next_break|. (The |next_break| fields actually reside in the same memory
space as the |prev_break| fields did, but we give them a new name because
of their new significance.) Then the lines are justified, one by one.

@d next_break==prev_break {new name for |prev_break| after links are reversed}

@<Declare subprocedures for |line_break|@>=
procedure post_line_break(@!final_widow_penalty:integer);
label done,done1;
var q,@!r,@!s:pointer; {temporary registers for list manipulation}
@!disc_break:boolean; {was the current break at a discretionary node?}
@!post_disc_break:boolean; {and did it have a nonempty post-break part?}
@!cur_width:scaled; {width of line number |cur_line|}
@!cur_indent:scaled; {left margin of line number |cur_line|}
@!t:quarterword; {used for replacement counts in discretionary nodes}
@!pen:integer; {use when calculating penalties between lines}
@!cur_line: halfword; {the current line number being justified}
begin @<Reverse the links of the relevant passive nodes, setting |cur_p| to the
  first breakpoint@>;
cur_line:=prev_graf+1;
repeat @<Justify the line ending at breakpoint |cur_p|, and append it to the
  current vertical list, together with associated penalties and other
  insertions@>;
incr(cur_line); cur_p:=next_break(cur_p);
if cur_p<>null then if not post_disc_break then
  @<Prune unwanted nodes at the beginning of the next line@>;
until cur_p=null;
if (cur_line<>best_line)or(link(temp_head)<>null) then
  confusion("line breaking");
@:this can't happen line breaking}{\quad line breaking@>
prev_graf:=best_line-1;
end;

@ The job of reversing links in a list is conveniently regarded as the job
of taking items off one stack and putting them on another. In this case we
take them off a stack pointed to by |q| and having |prev_break| fields;
we put them on a stack pointed to by |cur_p| and having |next_break| fields.
Node |r| is the passive node being moved from stack to stack.

@<Reverse the links of the relevant passive nodes...@>=
q:=break_node(best_bet); cur_p:=null;
repeat r:=q; q:=prev_break(q); next_break(r):=cur_p; cur_p:=r;
until q=null

@ Glue and penalty and kern and math nodes are deleted at the beginning of
a line, except in the anomalous case that the node to be deleted is actually
one of the chosen breakpoints. Otherwise
the pruning done here is designed to match
the lookahead computation in |try_break|, where the |break_width| values
are computed for non-discretionary breakpoints.

@<Prune unwanted nodes at the beginning of the next line@>=
begin r:=temp_head;
loop@+  begin q:=link(r);
  if q=cur_break(cur_p) then goto done1;
    {|cur_break(cur_p)| is the next breakpoint}
  {now |q| cannot be |null|}
  if is_char_node(q) then goto done1;
  if non_discardable(q) then goto done1;
  if type(q)=kern_node then if subtype(q)<>explicit then goto done1;
  r:=q; {now |type(q)=glue_node|, |kern_node|, |math_node| or |penalty_node|}
  end;
done1: if r<>temp_head then
  begin link(r):=null; flush_node_list(link(temp_head));
  link(temp_head):=q;
  end;
end

@ The current line to be justified appears in a horizontal list starting
at |link(temp_head)| and ending at |cur_break(cur_p)|. If |cur_break(cur_p)| is
a glue node, we reset the glue to equal the |right_skip| glue; otherwise
we append the |right_skip| glue at the right. If |cur_break(cur_p)| is a
discretionary node, we modify the list so that the discretionary break
is compulsory, and we set |disc_break| to |true|. We also append
the |left_skip| glue at the left of the line, unless it is zero.

@<Justify the line ending at breakpoint |cur_p|, and append it...@>=
@<Modify the end of the line to reflect the nature of the break and to include
  \.{\\rightskip}; also set the proper value of |disc_break|@>;
@<Put the \(l)\.{\\leftskip} glue at the left and detach this line@>;
@<Call the packaging subroutine, setting |just_box| to the justified box@>;
@<Append the new box to the current vertical list, followed by the list of
  special nodes taken out of the box by the packager@>;
@<Append a penalty node, if a nonzero penalty is appropriate@>

@ At the end of the following code, |q| will point to the final node on the
list about to be justified.

@<Modify the end of the line...@>=
q:=cur_break(cur_p); disc_break:=false; post_disc_break:=false;
if q<>null then {|q| cannot be a |char_node|}
  if type(q)=glue_node then
    begin delete_glue_ref(glue_ptr(q));
    glue_ptr(q):=right_skip;
    subtype(q):=right_skip_code+1; add_glue_ref(right_skip);
    goto done;
    end
  else  begin if type(q)=disc_node then
      @<Change discretionary to compulsory and set
        |disc_break:=true|@>
    else if (type(q)=math_node)or(type(q)=kern_node) then width(q):=0;
    end
else  begin q:=temp_head;
  while link(q)<>null do q:=link(q);
  end;
@<Put the \(r)\.{\\rightskip} glue after node |q|@>;
done:

@ @<Change discretionary to compulsory...@>=
begin t:=replace_count(q);
@<Destroy the |t| nodes following |q|, and
   make |r| point to the following node@>;
if post_break(q)<>null then @<Transplant the post-break list@>;
if pre_break(q)<>null then @<Transplant the pre-break list@>;
link(q):=r; disc_break:=true;
end

@ @<Destroy the |t| nodes following |q|...@>=
if t=0 then r:=link(q)
else  begin r:=q;
  while t>1 do
    begin r:=link(r); decr(t);
    end;
  s:=link(r);
  r:=link(s); link(s):=null;
  flush_node_list(link(q)); replace_count(q):=0;
  end

@ We move the post-break list from inside node |q| to the main list by
re\-attaching it just before the present node |r|, then resetting |r|.

@<Transplant the post-break list@>=
begin s:=post_break(q);
while link(s)<>null do s:=link(s);
link(s):=r; r:=post_break(q); post_break(q):=null; post_disc_break:=true;
end

@ We move the pre-break list from inside node |q| to the main list by
re\-attaching it just after the present node |q|, then resetting |q|.

@<Transplant the pre-break list@>=
begin s:=pre_break(q); link(q):=s;
while link(s)<>null do s:=link(s);
pre_break(q):=null; q:=s;
end

@ @<Put the \(r)\.{\\rightskip} glue after node |q|@>=
r:=new_param_glue(right_skip_code); link(r):=link(q); link(q):=r; q:=r

@ The following code begins with |q| at the end of the list to be
justified. It ends with |q| at the beginning of that list, and with
|link(temp_head)| pointing to the remainder of the paragraph, if any.

@<Put the \(l)\.{\\leftskip} glue at the left...@>=
r:=link(q); link(q):=null; q:=link(temp_head); link(temp_head):=r;
if left_skip<>zero_glue then
  begin r:=new_param_glue(left_skip_code);
  link(r):=q; q:=r;
  end

@ @<Append the new box to the current vertical list...@>=
append_to_vlist(just_box);
if adjust_head<>adjust_tail then
  begin link(tail):=link(adjust_head); tail:=adjust_tail;
   end;
adjust_tail:=null

@ Now |q| points to the hlist that represents the current line of the
paragraph. We need to compute the appropriate line width, pack the
line into a box of this size, and shift the box by the appropriate
amount of indentation.

@<Call the packaging subroutine...@>=
if cur_line>last_special_line then
  begin cur_width:=second_width; cur_indent:=second_indent;
  end
else if par_shape_ptr=null then
  begin cur_width:=first_width; cur_indent:=first_indent;
  end
else  begin cur_width:=mem[par_shape_ptr+2*cur_line].sc;
  cur_indent:=mem[par_shape_ptr+2*cur_line-1].sc;
  end;
adjust_tail:=adjust_head; just_box:=hpack(q,cur_width,exactly);
shift_amount(just_box):=cur_indent

@ Penalties between the lines of a paragraph come from club and widow lines,
from the |inter_line_penalty| parameter, and from lines that end at
discretionary breaks.  Breaking between lines of a two-line paragraph gets
both club-line and widow-line penalties. The local variable |pen| will
be set to the sum of all relevant penalties for the current line, except
that the final line is never penalized.

@<Append a penalty node, if a nonzero penalty is appropriate@>=
if cur_line+1<>best_line then
  begin pen:=inter_line_penalty;
  if cur_line=prev_graf+1 then pen:=pen+club_penalty;
  if cur_line+2=best_line then pen:=pen+final_widow_penalty;
  if disc_break then pen:=pen+broken_penalty;
  if pen<>0 then
    begin r:=new_penalty(pen);
    link(tail):=r; tail:=r;
    end;
  end

@* \[40] Pre-hyphenation.
When the line-breaking routine is unable to find a feasible sequence of
breakpoints, it makes a second pass over the paragraph, attempting to
hyphenate the hyphenatable words. The goal of hyphenation is to insert
discretionary material into the paragraph so that there are more
potential places to break.

The general rules for hyphenation are somewhat complex and technical,
because we want to be able to hyphenate words that are preceded or
followed by punctuation marks, and because we want the rules to work
for languages other than English. We also must contend with the fact
that hyphens might radically alter the ligature and kerning structure
of a word.

A sequence of characters will be considered for hyphenation only if it
belongs to a ``potentially hyphenatable part'' of the current paragraph.
This is a sequence of nodes $p_0p_1\ldots p_m$ where $p_0$ is a glue node,
$p_1\ldots p_{m-1}$ are either character or ligature or whatsit or
implicit kern nodes, and $p_m$ is a glue or penalty or insertion or adjust
or mark or whatsit or explicit kern node.  (Therefore hyphenation is
disabled by boxes, math formulas, and discretionary nodes already inserted
by the user.) The ligature nodes among $p_1\ldots p_{m-1}$ are effectively
expanded into the original non-ligature characters; the kern nodes and
whatsits are ignored. Each character |c| is now classified as either a
nonletter (if |lc_code(c)=0|), a lowercase letter (if
|lc_code(c)=c|), or an uppercase letter (otherwise); an uppercase letter
is treated as if it were |lc_code(c)| for purposes of hyphenation. The
characters generated by $p_1\ldots p_{m-1}$ may begin with nonletters; let
$c_1$ be the first letter that is not in the middle of a ligature. Whatsit
nodes preceding $c_1$ are ignored; a whatsit found after $c_1$ will be the
terminating node $p_m$. All characters that do not have the same font as
$c_1$ will be treated as nonletters. The |hyphen_char| for that font
must be between 0 and 255, otherwise hyphenation will not be attempted.
\TeX\ looks ahead for as many consecutive letters $c_1\ldots c_n$ as
possible; however, |n| must be less than 64, so a character that would
otherwise be $c_{64}$ is effectively not a letter. Furthermore $c_n$ must
not be in the middle of a ligature.  In this way we obtain a string of
letters $c_1\ldots c_n$ that are generated by nodes $p_a\ldots p_b$, where
|1<=a<=b+1<=m|. If |n>=l_hyf+r_hyf|, this string qualifies for hyphenation;
however, |uc_hyph| must be positive, if $c_1$ is uppercase.

The hyphenation process takes place in three stages. First, the candidate
sequence $c_1\ldots c_n$ is found; then potential positions for hyphens
are determined by referring to hyphenation tables; and finally, the nodes
$p_a\ldots p_b$ are replaced by a new sequence of nodes that includes the
discretionary breaks found.

Fortunately, we do not have to do all this calculation very often, because
of the way it has been taken out of \TeX's inner loop. For example, when
the second edition of the author's 700-page book {\sl Seminumerical
Algorithms} was typeset by \TeX, only about 1.2 hyphenations needed to be
@^Knuth, Donald Ervin@>
tried per paragraph, since the line breaking algorithm needed to use two
passes on only about 5 per cent of the paragraphs.

@<Initialize for hyphenating...@>=
begin @!init if trie_not_ready then init_trie;@+tini@;@/
cur_lang:=init_cur_lang; l_hyf:=init_l_hyf; r_hyf:=init_r_hyf;
end

@ The letters $c_1\ldots c_n$ that are candidates for hyphenation are placed
into an array called |hc|; the number |n| is placed into |hn|; pointers to
nodes $p_{a-1}$ and~$p_b$ in the description above are placed into variables
|ha| and |hb|; and the font number is placed into |hf|.

@<Glob...@>=
@!hc:array[0..65] of 0..256; {word to be hyphenated}
@!hn:small_number; {the number of positions occupied in |hc|}
@!ha,@!hb:pointer; {nodes |ha..hb| should be replaced by the hyphenated result}
@!hf:internal_font_number; {font number of the letters in |hc|}
@!hu:array[0..63] of 0..256; {like |hc|, before conversion to lowercase}
@!hyf_char:integer; {hyphen character of the relevant font}
@!cur_lang,@!init_cur_lang:ASCII_code; {current hyphenation table of interest}
@!l_hyf,@!r_hyf,@!init_l_hyf,@!init_r_hyf:integer; {limits on fragment sizes}
@!hyf_bchar:halfword; {boundary character after $c_n$}

@ Hyphenation routines need a few more local variables.

@<Local variables for line...@>=
@!j:small_number; {an index into |hc| or |hu|}
@!c:0..255; {character being considered for hyphenation}

@ When the following code is activated, the |line_break| procedure is in its
second pass, and |cur_p| points to a glue node.

@<Try to hyphenate...@>=
begin prev_s:=cur_p; s:=link(prev_s);
if s<>null then
  begin @<Skip to node |ha|, or |goto done1| if no hyphenation
    should be attempted@>;
  if l_hyf+r_hyf>63 then goto done1;
  @<Skip to node |hb|, putting letters into |hu| and |hc|@>;
  @<Check that the nodes following |hb| permit hyphenation and that at least
    |l_hyf+r_hyf| letters have been found, otherwise |goto done1|@>;
  hyphenate;
  end;
done1: end

@ @<Declare subprocedures for |line_break|@>=
@t\4@>@<Declare the function called |reconstitute|@>
procedure hyphenate;
label common_ending,done,found,found1,found2,not_found,exit;
var @<Local variables for hyphenation@>@;
begin @<Find hyphen locations for the word in |hc|, or |return|@>;
@<If no hyphens were found, |return|@>;
@<Replace nodes |ha..hb| by a sequence of nodes that includes
  the discretionary hyphens@>;
exit:end;

@ The first thing we need to do is find the node |ha| just before the
first letter.

@<Skip to node |ha|, or |goto done1|...@>=
loop@+  begin if is_char_node(s) then
    begin c:=qo(character(s)); hf:=font(s);
    end
  else if type(s)=ligature_node then
    if lig_ptr(s)=null then goto continue
    else begin q:=lig_ptr(s); c:=qo(character(q)); hf:=font(q);
      end
  else if (type(s)=kern_node)and(subtype(s)=normal) then goto continue
  else if type(s)=whatsit_node then
    begin @<Advance \(p)past a whatsit node in the \(p)pre-hyphenation loop@>;
    goto continue;
    end
  else goto done1;
  if lc_code(c)<>0 then
    if (lc_code(c)=c)or(uc_hyph>0) then goto done2
    else goto done1;
continue: prev_s:=s; s:=link(prev_s);
  end;
done2: hyf_char:=hyphen_char[hf];
if hyf_char<0 then goto done1;
if hyf_char>255 then goto done1;
ha:=prev_s

@ The word to be hyphenated is now moved to the |hu| and |hc| arrays.

@<Skip to node |hb|, putting letters...@>=
hn:=0;
loop@+  begin if is_char_node(s) then
    begin if font(s)<>hf then goto done3;
    hyf_bchar:=character(s); c:=qo(hyf_bchar);
    if lc_code(c)=0 then goto done3;
    if hn=63 then goto done3;
    hb:=s; incr(hn); hu[hn]:=c; hc[hn]:=lc_code(c); hyf_bchar:=non_char;
    end
  else if type(s)=ligature_node then
    @<Move the characters of a ligature node to |hu| and |hc|;
      but |goto done3| if they are not all letters@>
  else if (type(s)=kern_node)and(subtype(s)=normal) then
    begin hb:=s;
    hyf_bchar:=font_bchar[hf];
    end
  else goto done3;
  s:=link(s);
  end;
done3:

@ We let |j| be the index of the character being stored when a ligature node
is being expanded, since we do not want to advance |hn| until we are sure
that the entire ligature consists of letters. Note that it is possible
to get to |done3| with |hn=0| and |hb| not set to any value.

@<Move the characters of a ligature node to |hu| and |hc|...@>=
begin if font(lig_char(s))<>hf then goto done3;
j:=hn; q:=lig_ptr(s);@+if q>null then hyf_bchar:=character(q);
while q>null do
  begin c:=qo(character(q));
  if lc_code(c)=0 then goto done3;
  if j=63 then goto done3;
  incr(j); hu[j]:=c; hc[j]:=lc_code(c);@/
  q:=link(q);
  end;
hb:=s; hn:=j;
if odd(subtype(s)) then hyf_bchar:=font_bchar[hf]@+else hyf_bchar:=non_char;
end

@ @<Check that the nodes following |hb| permit hyphenation...@>=
if hn<l_hyf+r_hyf then goto done1; {|l_hyf| and |r_hyf| are |>=1|}
loop@+  begin if not(is_char_node(s)) then
    case type(s) of
    ligature_node: do_nothing;
    kern_node: if subtype(s)<>normal then goto done4;
    whatsit_node,glue_node,penalty_node,ins_node,adjust_node,mark_node:
      goto done4;
    othercases goto done1
    endcases;
  s:=link(s);
  end;
done4:

@* \[41] Post-hyphenation.
If a hyphen may be inserted between |hc[j]| and |hc[j+1]|, the hyphenation
procedure will set |hyf[j]| to some small odd number. But before we look
at \TeX's hyphenation procedure, which is independent of the rest of the
line-breaking algorithm, let us consider what we will do with the hyphens
it finds, since it is better to work on this part of the program before
forgetting what |ha| and |hb|, etc., are all about.

@<Glob...@>=
@!hyf:array [0..64] of 0..9; {odd values indicate discretionary hyphens}
@!init_list:pointer; {list of punctuation characters preceding the word}
@!init_lig:boolean; {does |init_list| represent a ligature?}
@!init_lft:boolean; {if so, did the ligature involve a left boundary?}

@ @<Local variables for hyphenation@>=
@!i,@!j,@!l:0..65; {indices into |hc| or |hu|}
@!q,@!r,@!s:pointer; {temporary registers for list manipulation}
@!bchar:halfword; {right boundary character of hyphenated word, or |non_char|}

@ \TeX\ will never insert a hyphen that has fewer than
\.{\\lefthyphenmin} letters before it or fewer than
\.{\\righthyphenmin} after it; hence, a short word has
comparatively little chance of being hyphenated. If no hyphens have
been found, we can save time by not having to make any changes to the
paragraph.

@<If no hyphens were found, |return|@>=
for j:=l_hyf to hn-r_hyf do if odd(hyf[j]) then goto found1;
return;
found1:

@ If hyphens are in fact going to be inserted, \TeX\ first deletes the
subsequence of nodes between |ha| and~|hb|. An attempt is made to
preserve the effect that implicit boundary characters and punctuation marks
had on ligatures inside the hyphenated word, by storing a left boundary or
preceding character in |hu[0]| and by storing a possible right boundary
in |bchar|. We set |j:=0| if |hu[0]| is to be part of the reconstruction;
otherwise |j:=1|.
The variable |s| will point to the tail of the current hlist, and
|q| will point to the node following |hb|, so that
things can be hooked up after we reconstitute the hyphenated word.

@<Replace nodes |ha..hb| by a sequence of nodes...@>=
q:=link(hb); link(hb):=null; r:=link(ha); link(ha):=null; bchar:=hyf_bchar;
if is_char_node(ha) then
  if font(ha)<>hf then goto found2
  else begin init_list:=ha; init_lig:=false; hu[0]:=qo(character(ha));
    end
else if type(ha)=ligature_node then
  if font(lig_char(ha))<>hf then goto found2
  else begin init_list:=lig_ptr(ha); init_lig:=true; init_lft:=(subtype(ha)>1);
    hu[0]:=qo(character(lig_char(ha)));
    if init_list=null then if init_lft then
      begin hu[0]:=256; init_lig:=false;
      end; {in this case a ligature will be reconstructed from scratch}
    free_node(ha,small_node_size);
    end
else begin {no punctuation found; look for left boundary}
  if not is_char_node(r) then if type(r)=ligature_node then
   if subtype(r)>1 then goto found2;
  j:=1; s:=ha; init_list:=null; goto common_ending;
  end;
s:=cur_p; {we have |cur_p<>ha| because |type(cur_p)=glue_node|}
while link(s)<>ha do s:=link(s);
j:=0; goto common_ending;
found2: s:=ha; j:=0; hu[0]:=256; init_lig:=false; init_list:=null;
common_ending: flush_node_list(r);
@<Reconstitute nodes for the hyphenated word, inserting discretionary hyphens@>;
flush_list(init_list)

@ We must now face the fact that the battle is not over, even though the
{\def\!{\kern-1pt}%
hyphens have been found: The process of reconstituting a word can be nontrivial
because ligatures might change when a hyphen is present. {\sl The \TeX book\/}
discusses the difficulties of the word ``difficult'', and
the discretionary material surrounding a
hyphen can be considerably more complex than that. Suppose
\.{abcdef} is a word in a font for which the only ligatures are \.{b\!c},
\.{c\!d}, \.{d\!e}, and \.{e\!f}. If this word permits hyphenation
between \.b and \.c, the two patterns with and without hyphenation are
$\.a\,\.b\,\.-\,\.{c\!d}\,\.{e\!f}$ and $\.a\,\.{b\!c}\,\.{d\!e}\,\.f$.
Thus the insertion of a hyphen might cause effects to ripple arbitrarily
far into the rest of the word. A further complication arises if additional
hyphens appear together with such rippling, e.g., if the word in the
example just given could also be hyphenated between \.c and \.d; \TeX\
avoids this by simply ignoring the additional hyphens in such weird cases.}

Still further complications arise in the presence of ligatures that do not
delete the original characters. When punctuation precedes the word being
hyphenated, \TeX's method is not perfect under all possible scenarios,
because punctuation marks and letters can propagate information back and forth.
For example, suppose the original pre-hyphenation pair
\.{*a} changes to \.{*y} via a \.{\?=:} ligature, which changes to \.{xy}
via a \.{=:\?} ligature; if $p_{a-1}=\.x$ and $p_a=\.y$, the reconstitution
procedure isn't smart enough to obtain \.{xy} again. In such cases the
font designer should include a ligature that goes from \.{xa} to \.{xy}.

@ The processing is facilitated by a subroutine called |reconstitute|. Given
a string of characters $x_j\ldots x_n$, there is a smallest index $m\ge j$
such that the ``translation'' of $x_j\ldots x_n$ by ligatures and kerning
has the form $y_1\ldots y_t$ followed by the translation of $x_{m+1}\ldots x_n$,
where $y_1\ldots y_t$ is some nonempty sequence of character, ligature, and
kern nodes. We call $x_j\ldots x_m$ a ``cut prefix'' of $x_j\ldots x_n$.
For example, if $x_1x_2x_3=\.{fly}$, and if the font contains `fl' as a
ligature and a kern between `fl' and `y', then $m=2$, $t=2$, and $y_1$ will
be a ligature node for `fl' followed by an appropriate kern node~$y_2$.
In the most common case, $x_j$~forms no ligature with $x_{j+1}$ and we
simply have $m=j$, $y_1=x_j$. If $m<n$ we can repeat the procedure on
$x_{m+1}\ldots x_n$ until the entire translation has been found.

The |reconstitute| function returns the integer $m$ and puts the nodes
$y_1\ldots y_t$ into a linked list starting at |link(hold_head)|,
getting the input $x_j\ldots x_n$ from the |hu| array. If $x_j=256$,
we consider $x_j$ to be an implicit left boundary character; in this
case |j| must be strictly less than~|n|. There is a
parameter |bchar|, which is either 256 or an implicit right boundary character
assumed to be present just following~$x_n$. (The value |hu[n+1]| is never
explicitly examined, but the algorithm imagines that |bchar| is there.)

If there exists an index |k| in the range $j\le k\le m$ such that |hyf[k]|
is odd and such that the result of |reconstitute| would have been different
if $x_{k+1}$ had been |hchar|, then |reconstitute| sets |hyphen_passed|
to the smallest such~|k|. Otherwise it sets |hyphen_passed| to zero.

A special convention is used in the case |j=0|: Then we assume that the
translation of |hu[0]| appears in a special list of charnodes starting at
|init_list|; moreover, if |init_lig| is |true|, then |hu[0]| will be
a ligature character, involving a left boundary if |init_lft| is |true|.
This facility is provided for cases when a hyphenated
word is preceded by punctuation (like single or double quotes) that might
affect the translation of the beginning of the word.

@<Glob...@>=
@!hyphen_passed:small_number; {first hyphen in a ligature, if any}

@ @<Declare the function called |reconstitute|@>=
function reconstitute(@!j,@!n:small_number;@!bchar,@!hchar:halfword):
  small_number;
label continue,done;
var @!p:pointer; {temporary register for list manipulation} 
@!t:pointer; {a node being appended to}
@!q:four_quarters; {character information or a lig/kern instruction}
@!cur_rh:halfword; {hyphen character for ligature testing}
@!test_char:halfword; {hyphen or other character for ligature testing}
@!w:scaled; {amount of kerning}
@!k:font_index; {position of current lig/kern instruction}
begin hyphen_passed:=0; t:=hold_head; w:=0; link(hold_head):=null;
 {at this point |ligature_present=lft_hit=rt_hit=false|}
@<Set up data structures with the cursor following position |j|@>;
continue:@<If there's a ligature or kern at the cursor position, update the data
  structures, possibly advancing~|j|; continue until the cursor moves@>;
@<Append a ligature and/or kern to the translation;
  |goto continue| if the stack of inserted ligatures is nonempty@>;
reconstitute:=j;
end;

@ The reconstitution procedure shares many of the global data structures
by which \TeX\ has processed the words before they were hyphenated.
There is an implied ``cursor'' between characters |cur_l| and |cur_r|;
these characters will be tested for possible ligature activity. If
|ligature_present| then |cur_l| is a ligature character formed from the
original characters following |cur_q| in the current translation list.
There is a ``ligature stack'' between the cursor and character |j+1|,
consisting of pseudo-ligature nodes linked together by their |link| fields.
This stack is normally empty unless a ligature command has created a new
character that will need to be processed later. A pseudo-ligature is
a special node having a |character| field that represents a potential
ligature and a |lig_ptr| field that points to a |char_node| or is |null|.
We have
$$|cur_r|=\cases{|character(lig_stack)|,&if |lig_stack>null|;\cr
  |qi(hu[j+1])|,&if |lig_stack=null| and |j<n|;\cr
  bchar,&if |lig_stack=null| and |j=n|.\cr}$$

@<Glob...@>=
@!cur_l,@!cur_r:halfword; {characters before and after the cursor}
@!cur_q:pointer; {where a ligature should be detached}
@!lig_stack:pointer; {unfinished business to the right of the cursor}
@!ligature_present:boolean; {should a ligature node be made for |cur_l|?}
@!lft_hit,@!rt_hit:boolean; {did we hit a ligature with a boundary character?}

@ @d append_charnode_to_t(#)== begin link(t):=get_avail; t:=link(t);
    font(t):=hf; character(t):=#;
    end
@d set_cur_r==begin if j<n then cur_r:=qi(hu[j+1])@+else cur_r:=bchar;
    if odd(hyf[j]) then cur_rh:=hchar@+else cur_rh:=non_char;
    end

@<Set up data structures with the cursor following position |j|@>=
cur_l:=qi(hu[j]); cur_q:=t;
if j=0 then
  begin ligature_present:=init_lig; p:=init_list;
  if ligature_present then lft_hit:=init_lft;
  while p>null do
    begin append_charnode_to_t(character(p)); p:=link(p);
    end;
  end
else if cur_l<non_char then append_charnode_to_t(cur_l);
lig_stack:=null; set_cur_r

@ We may want to look at the lig/kern program twice, once for a hyphen
and once for a normal letter. (The hyphen might appear after the letter
in the program, so we'd better not try to look for both at once.)

@<If there's a ligature or kern at the cursor position, update...@>=
if cur_l=non_char then
  begin k:=bchar_label[hf];
  if k=non_address then goto done@+else q:=font_info[k].qqqq;
  end
else begin q:=char_info(hf)(cur_l);
  if char_tag(q)<>lig_tag then goto done;
  k:=lig_kern_start(hf)(q); q:=font_info[k].qqqq;
  if skip_byte(q)>stop_flag then
    begin k:=lig_kern_restart(hf)(q); q:=font_info[k].qqqq;
    end;
  end; {now |k| is the starting address of the lig/kern program}
if cur_rh<non_char then test_char:=cur_rh@+else test_char:=cur_r;
loop@+begin if next_char(q)=test_char then if skip_byte(q)<=stop_flag then
    if cur_rh<non_char then
      begin hyphen_passed:=j; hchar:=non_char; cur_rh:=non_char;
      goto continue;
      end
    else begin if hchar<non_char then if odd(hyf[j]) then
        begin hyphen_passed:=j; hchar:=non_char;
        end;
      if op_byte(q)<kern_flag then
      @<Carry out a ligature replacement, updating the cursor structure
        and possibly advancing~|j|; |goto continue| if the cursor doesn't
        advance, otherwise |goto done|@>;
      w:=char_kern(hf)(q); goto done; {this kern will be inserted below}
     end;
  if skip_byte(q)>=stop_flag then
    if cur_rh=non_char then goto done
    else begin cur_rh:=non_char; goto continue;
      end;
  k:=k+qo(skip_byte(q))+1; q:=font_info[k].qqqq;
  end;
done:

@ @d wrap_lig(#)==if ligature_present then
    begin p:=new_ligature(hf,cur_l,link(cur_q));
    if lft_hit then
      begin subtype(p):=2; lft_hit:=false;
      end;
    if # then if lig_stack=null then
      begin incr(subtype(p)); rt_hit:=false;
      end;
    link(cur_q):=p; t:=p; ligature_present:=false;
    end
@d pop_lig_stack==begin if lig_ptr(lig_stack)>null then
    begin link(t):=lig_ptr(lig_stack); {this is a charnode for |hu[j+1]|}
    t:=link(t); incr(j);
    end;
  p:=lig_stack; lig_stack:=link(p); free_node(p,small_node_size);
  if lig_stack=null then set_cur_r@+else cur_r:=character(lig_stack);
  end {if |lig_stack| isn't |null| we have |cur_rh=non_char|}

@<Append a ligature and/or kern to the translation...@>=
wrap_lig(rt_hit);
if w<>0 then
  begin link(t):=new_kern(w); t:=link(t); w:=0;
  end;
if lig_stack>null then
  begin cur_q:=t; cur_l:=character(lig_stack); ligature_present:=true;
  pop_lig_stack; goto continue;
  end

@ @<Carry out a ligature replacement, updating the cursor structure...@>=
begin if cur_l=non_char then lft_hit:=true;
if j=n then if lig_stack=null then rt_hit:=true;
check_interrupt; {allow a way out in case there's an infinite ligature loop}
case op_byte(q) of
qi(1),qi(5):begin cur_l:=rem_byte(q); {\.{=:\?}, \.{=:\?>}}
  ligature_present:=true;
  end;
qi(2),qi(6):begin cur_r:=rem_byte(q); {\.{\?=:}, \.{\?=:>}}
  if lig_stack>null then character(lig_stack):=cur_r
  else begin lig_stack:=new_lig_item(cur_r);
    if j=n then bchar:=non_char
    else begin p:=get_avail; lig_ptr(lig_stack):=p;
      character(p):=qi(hu[j+1]); font(p):=hf;
      end;
    end;
  end;
qi(3):begin cur_r:=rem_byte(q); {\.{\?=:\?}}
  p:=lig_stack; lig_stack:=new_lig_item(cur_r); link(lig_stack):=p;
  end;
qi(7),qi(11):begin wrap_lig(false); {\.{\?=:\?>}, \.{\?=:\?>>}}
  cur_q:=t; cur_l:=rem_byte(q); ligature_present:=true;
  end;
othercases begin cur_l:=rem_byte(q); ligature_present:=true; {\.{=:}}
  if lig_stack>null then pop_lig_stack
  else if j=n then goto done
  else begin append_charnode_to_t(cur_r); incr(j); set_cur_r;
    end;
  end
endcases;
if op_byte(q)>qi(4) then if op_byte(q)<>qi(7) then goto done;
goto continue;
end

@ Okay, we're ready to insert the potential hyphenations that were found.
When the following program is executed, we want to append the word
|hu[1..hn]| after node |ha|, and node |q| should be appended to the result.
During this process, the variable |i| will be a temporary
index into |hu|; the variable |j| will be an index to our current position
in |hu|; the variable |l| will be the counterpart of |j|, in a discretionary
branch; the variable |r| will point to new nodes being created; and
we need a few new local variables:

@<Local variables for hyph...@>=
@!major_tail,@!minor_tail:pointer; {the end of lists in the main and
  discretionary branches being reconstructed}
@!c:ASCII_code; {character temporarily replaced by a hyphen}
@!c_loc:0..63; {where that character came from}
@!r_count:integer; {replacement count for discretionary}
@!hyf_node:pointer; {the hyphen, if it exists}

@ When the following code is performed, |hyf[0]| and |hyf[hn]| will be zero.

@<Reconstitute nodes for the hyphenated word...@>=
repeat l:=j; j:=reconstitute(j,hn,bchar,qi(hyf_char))+1;
if hyphen_passed=0 then
  begin link(s):=link(hold_head);
  while link(s)>null do s:=link(s);
  if odd(hyf[j-1]) then
    begin l:=j; hyphen_passed:=j-1; link(hold_head):=null;
    end;
  end;
if hyphen_passed>0 then
  @<Create and append a discretionary node as an alternative to the
    unhyphenated word, and continue to develop both branches until they
    become equivalent@>;
until j>hn;
link(s):=q

@ In this repeat loop we will insert another discretionary if |hyf[j-1]| is
odd, when both branches of the previous discretionary end at position |j-1|.
Strictly speaking, we aren't justified in doing this, because we don't know
that a hyphen after |j-1| is truly independent of those branches. But in almost
all applications we would rather not lose a potentially valuable hyphenation
point. (Consider the word `difficult', where the letter `c' is in position |j|.)

@d advance_major_tail==begin major_tail:=link(major_tail); incr(r_count);
    end

@<Create and append a discretionary node as an alternative...@>=
repeat r:=get_node(small_node_size);
link(r):=link(hold_head); type(r):=disc_node;
major_tail:=r; r_count:=0;
while link(major_tail)>null do advance_major_tail;
i:=hyphen_passed; hyf[i]:=0;
@<Put the \(c)characters |hu[l..i]| and a hyphen into |pre_break(r)|@>;
@<Put the \(c)characters |hu[i+1..@,]| into |post_break(r)|, appending to this
  list and to |major_tail| until synchronization has been achieved@>;
@<Move pointer |s| to the end of the current list, and set |replace_count(r)|
  appropriately@>;
hyphen_passed:=j-1; link(hold_head):=null;
until not odd(hyf[j-1])

@ The new hyphen might combine with the previous character via ligature
or kern. At this point we have |l-1<=i<j| and |i<hn|.

@<Put the \(c)characters |hu[l..i]| and a hyphen into |pre_break(r)|@>=
minor_tail:=null; pre_break(r):=null; hyf_node:=new_character(hf,hyf_char);
if hyf_node<>null then
  begin incr(i); c:=hu[i]; hu[i]:=hyf_char; free_avail(hyf_node);
  end;
while l<=i do
  begin l:=reconstitute(l,i,font_bchar[hf],non_char)+1;
  if link(hold_head)>null then
    begin if minor_tail=null then pre_break(r):=link(hold_head)
    else link(minor_tail):=link(hold_head);
    minor_tail:=link(hold_head);
    while link(minor_tail)>null do minor_tail:=link(minor_tail);
    end;
  end;
if hyf_node<>null then
  begin hu[i]:=c; {restore the character in the hyphen position}
  l:=i; decr(i);
  end

@ The synchronization algorithm begins with |l=i+1<=j|.

@<Put the \(c)characters |hu[i+1..@,]| into |post_break(r)|...@>=
minor_tail:=null; post_break(r):=null; c_loc:=0;
if bchar_label[hf]<>non_address then {put left boundary at beginning of new line}
  begin decr(l); c:=hu[l]; c_loc:=l; hu[l]:=256;
  end;
while l<j do
  begin repeat l:=reconstitute(l,hn,bchar,non_char)+1;
  if c_loc>0 then
    begin hu[c_loc]:=c; c_loc:=0;
    end;
  if link(hold_head)>null then
    begin if minor_tail=null then post_break(r):=link(hold_head)
    else link(minor_tail):=link(hold_head);
    minor_tail:=link(hold_head);
    while link(minor_tail)>null do minor_tail:=link(minor_tail);
    end;
  until l>=j;
  while l>j do
    @<Append characters of |hu[j..@,]| to |major_tail|, advancing~|j|@>;
  end

@ @<Append characters of |hu[j..@,]|...@>=
begin j:=reconstitute(j,hn,bchar,non_char)+1;
link(major_tail):=link(hold_head);
while link(major_tail)>null do advance_major_tail;
end

@ Ligature insertion can cause a word to grow exponentially in size. Therefore
we must test the size of |r_count| here, even though the hyphenated text
was at most 63 characters long.

@<Move pointer |s| to the end of the current list...@>=
if r_count>127 then {we have to forget the discretionary hyphen}
  begin link(s):=link(r); link(r):=null; flush_node_list(r);
  end
else begin link(s):=r; replace_count(r):=r_count;
  end;
s:=major_tail

@* \[42] Hyphenation.
When a word |hc[1..hn]| has been set up to contain a candidate for hyphenation,
\TeX\ first looks to see if it is in the user's exception dictionary. If not,
hyphens are inserted based on patterns that appear within the given word,
using an algorithm due to Frank~M. Liang.
@^Liang, Franklin Mark@>

Let's consider Liang's method first, since it is much more interesting than the
exception-lookup routine.  The algorithm begins by setting |hyf[j]| to zero
for all |j|, and invalid characters are inserted into |hc[0]|
and |hc[hn+1]| to serve as delimiters. Then a reasonably fast method is
used to see which of a given set of patterns occurs in the word
|hc[0..(hn+1)]|. Each pattern $p_1\ldots p_k$ of length |k| has an associated
sequence of |k+1| numbers $n_0\ldots n_k$; and if the pattern occurs in
|hc[(j+1)..(j+k)]|, \TeX\ will set |hyf[j+i]:=@tmax@>(hyf[j+i],@t$n_i$@>)| for
|0<=i<=k|. After this has been done for each pattern that occurs, a
discretionary hyphen will be inserted between |hc[j]| and |hc[j+1]| when
|hyf[j]| is odd, as we have already seen.

The set of patterns $p_1\ldots p_k$ and associated numbers $n_0\ldots n_k$
depends, of course, on the language whose words are being hyphenated, and
on the degree of hyphenation that is desired. A method for finding
appropriate |p|'s and |n|'s, from a given dictionary of words and acceptable
hyphenations, is discussed in Liang's Ph.D. thesis (Stanford University,
1983); \TeX\ simply starts with the patterns and works from there.

@ The patterns are stored in a compact table that is also efficient for
retrieval, using a variant of ``trie memory'' [cf.\ {\sl The Art of
Computer Programming \bf3} (1973), 481--505]. We can find each pattern
$p_1\ldots p_k$ by letting $z_0$ be one greater than the relevant language
index and then, for |1<=i<=k|,
setting |@t$z_i$@>:=trie_link@t$(z_{i-1})+p_i$@>|; the pattern will be
identified by the number $z_k$. Since all the pattern information is
packed together into a single |trie_link| array, it is necessary to
prevent confusion between the data from inequivalent patterns, so another
table is provided such that |trie_char@t$(z_i)=p_i$@>| for all |i|. There
is also a table |trie_op|$(z_k)$ to identify the numbers $n_0\ldots n_k$
associated with $p_1\ldots p_k$.

Comparatively few different number sequences $n_0\ldots n_k$ actually occur,
since most of the |n|'s are generally zero. Therefore the number sequences
are encoded in such a way that |trie_op|$(z_k)$ is only one byte long.
If |trie_op(@t$z_k$@>)<>min_quarterword|, when $p_1\ldots p_k$ has matched
the letters in |hc[(l-k+1)..l@,]| of language |t|,
we perform all of the required operations
for this pattern by carrying out the following little program: Set
|v:=trie_op(@t$z_k$@>)|. Then set |v:=v+op_start[t]|,
|hyf[l-hyf_distance[v]]:=@tmax@>(hyf[l-hyf_distance[v]], hyf_num[v])|,
and |v:=hyf_next[v]|; repeat, if necessary, until |v=min_quarterword|.

@<Types...@>=
@!trie_pointer=0..trie_size; {an index into |trie|}

@ @d trie_link(#)==trie[#].rh {``downward'' link in a trie}
@d trie_char(#)==trie[#].b1 {character matched at this trie location}
@d trie_op(#)==trie[#].b0 {program for hyphenation at this trie location}

@<Glob...@>=
@!trie:array[trie_pointer] of two_halves; {|trie_link|, |trie_char|, |trie_op|}
@!hyf_distance:array[1..trie_op_size] of small_number; {position |k-j| of $n_j$}
@!hyf_num:array[1..trie_op_size] of small_number; {value of $n_j$}
@!hyf_next:array[1..trie_op_size] of quarterword; {continuation code}
@!op_start:array[ASCII_code] of 0..trie_op_size; {offset for current language}

@ @<Local variables for hyph...@>=
@!z:trie_pointer; {an index into |trie|}
@!v:integer; {an index into |hyf_distance|, etc.}

@ Assuming that these auxiliary tables have been set up properly, the
hyphenation algorithm is quite short. In the following code we set |hc[hn+2]|
to the impossible value 256, in order to guarantee that |hc[hn+3]| will
never be fetched.

@<Find hyphen locations for the word in |hc|...@>=
for j:=0 to hn do hyf[j]:=0;
@<Look for the word |hc[1..hn]| in the exception table, and |goto found| (with
  |hyf| containing the hyphens) if an entry is found@>;
if trie_char(cur_lang+1)<>qi(cur_lang) then return; {no patterns for |cur_lang|}
hc[0]:=0; hc[hn+1]:=0; hc[hn+2]:=256; {insert delimiters}
for j:=0 to hn-r_hyf+1 do
  begin z:=trie_link(cur_lang+1)+hc[j]; l:=j;
  while hc[l]=qo(trie_char(z)) do
    begin if trie_op(z)<>min_quarterword then
      @<Store \(m)maximum values in the |hyf| table@>;
    incr(l); z:=trie_link(z)+hc[l];
    end;
  end;
found: for j:=0 to l_hyf-1 do hyf[j]:=0;
for j:=0 to r_hyf-1 do hyf[hn-j]:=0

@ @<Store \(m)maximum values in the |hyf| table@>=
begin v:=trie_op(z);
repeat v:=v+op_start[cur_lang]; i:=l-hyf_distance[v];
if hyf_num[v]>hyf[i] then hyf[i]:=hyf_num[v];
v:=hyf_next[v];
until v=min_quarterword;
end

@ The exception table that is built by \TeX's \.{\\hyphenation} primitive is
organized as an ordered hash table [cf.\ Amble and Knuth, {\sl The Computer
@^Amble, Ole@> @^Knuth, Donald Ervin@>
Journal\/ \bf17} (1974), 135--142] using linear probing. If $\alpha$ and
$\beta$ are words, we will say that $\alpha<\beta$ if $\vert\alpha\vert<
\vert\beta\vert$ or if $\vert\alpha\vert=\vert\beta\vert$ and
$\alpha$ is lexicographically smaller than $\beta$. (The notation $\vert
\alpha\vert$ stands for the length of $\alpha$.) The idea of ordered hashing
is to arrange the table so that a given word $\alpha$ can be sought by computing
a hash address $h=h(\alpha)$ and then looking in table positions |h|, |h-1|,
\dots, until encountering the first word $\L\alpha$. If this word is
different from $\alpha$, we can conclude that $\alpha$ is not in the table.

The words in the table point to lists in |mem| that specify hyphen positions
in their |info| fields. The list for $c_1\ldots c_n$ contains the number |k| if
the word $c_1\ldots c_n$ has a discretionary hyphen between $c_k$ and
$c_{k+1}$.

@<Types...@>=
@!hyph_pointer=0..hyph_size; {an index into the ordered hash table}

@ @<Glob...@>=
@!hyph_word:array[hyph_pointer] of str_number; {exception words}
@!hyph_list:array[hyph_pointer] of pointer; {list of hyphen positions}
@!hyph_count:hyph_pointer; {the number of words in the exception dictionary}

@ @<Local variables for init...@>=
@!z:hyph_pointer; {runs through the exception dictionary}

@ @<Set init...@>=
for z:=0 to hyph_size do
  begin hyph_word[z]:=0; hyph_list[z]:=null;
  end;
hyph_count:=0;

@ The algorithm for exception lookup is quite simple, as soon as we have
a few more local variables to work with.

@<Local variables for hyph...@>=
@!h:hyph_pointer; {an index into |hyph_word| and |hyph_list|}
@!k:str_number; {an index into |str_start|}
@!u:pool_pointer; {an index into |str_pool|}

@ First we compute the hash code |h|, then we search until we either
find the word or we don't. Words from different languages are kept
separate by appending the language code to the string.

@<Look for the word |hc[1...@>=
h:=hc[1]; incr(hn); hc[hn]:=cur_lang;
for j:=2 to hn do h:=(h+h+hc[j]) mod hyph_size;
loop@+  begin @<If the string |hyph_word[h]| is less than \(hc)|hc[1..hn]|,
    |goto not_found|; but if the two strings are equal,
    set |hyf| to the hyphen positions and |goto found|@>;
  if h>0 then decr(h)@+else h:=hyph_size;
  end;
not_found: decr(hn)

@ @<If the string |hyph_word[h]| is less than \(hc)...@>=
k:=hyph_word[h]; if k=0 then goto not_found;
if length(k)<hn then goto not_found;
if length(k)=hn then
  begin j:=1; u:=str_start[k];
  repeat if so(str_pool[u])<hc[j] then goto not_found;
  if so(str_pool[u])>hc[j] then goto done;
  incr(j); incr(u);
  until j>hn;
  @<Insert hyphens as specified in |hyph_list[h]|@>;
  decr(hn); goto found;
  end;
done:

@ @<Insert hyphens as specified...@>=
s:=hyph_list[h];
while s<>null do
  begin hyf[info(s)]:=1; s:=link(s);
  end

@ @<Search |hyph_list| for pointers to |p|@>=
for q:=0 to hyph_size do
  begin if hyph_list[q]=p then
    begin print_nl("HYPH("); print_int(q); print_char(")");
    end;
  end

@ We have now completed the hyphenation routine, so the |line_break| procedure
is finished at last. Since the hyphenation exception table is fresh in our
minds, it's a good time to deal with the routine that adds new entries to it.

When \TeX\ has scanned `\.{\\hyphenation}', it calls on a procedure named
|new_hyph_exceptions| to do the right thing.

@d set_cur_lang==if language<=0 then cur_lang:=0
  else if language>255 then cur_lang:=0
  else cur_lang:=language

@p procedure new_hyph_exceptions; {enters new exceptions}
label reswitch, exit, found, not_found;
var n:0..64; {length of current word; not always a |small_number|}
@!j:0..64; {an index into |hc|}
@!h:hyph_pointer; {an index into |hyph_word| and |hyph_list|}
@!k:str_number; {an index into |str_start|}
@!p:pointer; {head of a list of hyphen positions}
@!q:pointer; {used when creating a new node for list |p|}
@!s,@!t:str_number; {strings being compared or stored}
@!u,@!v:pool_pointer; {indices into |str_pool|}
begin scan_left_brace; {a left brace must follow \.{\\hyphenation}}
set_cur_lang;
@<Enter as many hyphenation exceptions as are listed,
until coming to a right brace; then |return|@>;
exit:end;

@ @<Enter as many...@>=
n:=0; p:=null;
loop@+  begin get_x_token;
  reswitch: case cur_cmd of
  letter,other_char,char_given:@<Append a new letter or hyphen@>;
  char_num: begin scan_char_num; cur_chr:=cur_val; cur_cmd:=char_given;
    goto reswitch;
    end;
  spacer,right_brace: begin if n>1 then @<Enter a hyphenation exception@>;
    if cur_cmd=right_brace then return;
    n:=0; p:=null;
    end;
  othercases @<Give improper \.{\\hyphenation} error@>
  endcases;
  end

@ @<Give improper \.{\\hyph...@>=
begin print_err("Improper "); print_esc("hyphenation");
@.Improper \\hyphenation...@>
  print(" will be flushed");
help2("Hyphenation exceptions must contain only letters")@/
  ("and hyphens. But continue; I'll forgive and forget.");
error;
end

@ @<Append a new letter or hyphen@>=
if cur_chr="-" then @<Append the value |n| to list |p|@>
else  begin if lc_code(cur_chr)=0 then
    begin print_err("Not a letter");
@.Not a letter@>
    help2("Letters in \hyphenation words must have \lccode>0.")@/
      ("Proceed; I'll ignore the character I just read.");
    error;
    end
  else if n<63 then
    begin incr(n); hc[n]:=lc_code(cur_chr);
    end;
  end

@ @<Append the value |n| to list |p|@>=
begin if n<63 then
  begin q:=get_avail; link(q):=p; info(q):=n; p:=q;
  end;
end

@ @<Enter a hyphenation exception@>=
begin incr(n); hc[n]:=cur_lang; str_room(n); h:=0;
for j:=1 to n do
  begin h:=(h+h+hc[j]) mod hyph_size;
  append_char(hc[j]);
  end;
s:=make_string;
@<Insert the \(p)pair |(s,p)| into the exception table@>;
end

@ @<Insert the \(p)pair |(s,p)|...@>=
if hyph_count=hyph_size then overflow("exception dictionary",hyph_size);
@:TeX capacity exceeded exception dictionary}{\quad exception dictionary@>
incr(hyph_count);
while hyph_word[h]<>0 do
  begin @<If the string |hyph_word[h]| is less than \(or)or equal to
  |s|, interchange |(hyph_word[h],hyph_list[h])| with |(s,p)|@>;
  if h>0 then decr(h)@+else h:=hyph_size;
  end;
hyph_word[h]:=s; hyph_list[h]:=p

@ @<If the string |hyph_word[h]| is less than \(or)...@>=
k:=hyph_word[h];
if length(k)<length(s) then goto found;
if length(k)>length(s) then goto not_found;
u:=str_start[k]; v:=str_start[s];
repeat if str_pool[u]<str_pool[v] then goto found;
if str_pool[u]>str_pool[v] then goto not_found;
incr(u); incr(v);
until u=str_start[k+1];
found:q:=hyph_list[h]; hyph_list[h]:=p; p:=q;@/
t:=hyph_word[h]; hyph_word[h]:=s; s:=t;
not_found:

@* \[43] Initializing the hyphenation tables.
The trie for \TeX's hyphenation algorithm is built from a sequence of
patterns following a \.{\\patterns} specification. Such a specification
is allowed only in \.{INITEX}, since the extra memory for auxiliary tables
and for the initialization program itself would only clutter up the
production version of \TeX\ with a lot of deadwood.

The first step is to build a trie that is linked, instead of packed
into sequential storage, so that insertions are readily made.
After all patterns have been processed, \.{INITEX}
compresses the linked trie by identifying common subtries. Finally the
trie is packed into the efficient sequential form that the hyphenation
algorithm actually uses.

@<Declare subprocedures for |line_break|@>=
@!init @<Declare procedures for preprocessing hyphenation patterns@>@;
tini

@ Before we discuss trie building in detail, let's consider the simpler
problem of creating the |hyf_distance|, |hyf_num|, and |hyf_next| arrays.

Suppose, for example, that \TeX\ reads the pattern `\.{ab2cde1}'. This is
a pattern of length 5, with $n_0\ldots n_5=0\,0\,2\,0\,0\,1$ in the
notation above. We want the corresponding |trie_op| code |v| to have
|hyf_distance[v]=3|, |hyf_num[v]=2|, and |hyf_next[v]=@t$v^\prime$@>|,
where the auxiliary |trie_op| code $v^\prime$ has
|hyf_distance[@t$v^\prime$@>]=0|, |hyf_num[@t$v^\prime$@>]=1|, and
|hyf_next[@t$v^\prime$@>]=min_quarterword|.

\TeX\ computes an appropriate value |v| with the |new_trie_op| subroutine
below, by setting
$$\hbox{|@t$v^\prime$@>:=new_trie_op(0,1,min_quarterword)|,\qquad
|v:=new_trie_op(3,2,@t$v^\prime$@>)|.}$$
This subroutine looks up its three
parameters in a special hash table, assigning a new value only if these
three have not appeared before for the current language.

The hash table is called |trie_op_hash|, and the number of entries it contains
is |trie_op_ptr|.

@<Glob...@>=
@!init@! trie_op_hash:array[-trie_op_size..trie_op_size] of 0..trie_op_size;
  {trie op codes for quadruples}
@!trie_used:array[ASCII_code] of quarterword;
  {largest opcode used so far for this language}
@!trie_op_lang:array[1..trie_op_size] of ASCII_code;
  {language part of a hashed quadruple}
@!trie_op_val:array[1..trie_op_size] of quarterword;
  {opcode corresponding to a hashed quadruple}
@!trie_op_ptr:0..trie_op_size; {number of stored ops so far}
tini

@ It's tempting to remove the |overflow| stops in the following procedure;
|new_trie_op| could return |min_quarterword| (thereby simply ignoring
part of a hyphenation pattern) instead of aborting the job. However, that would
lead to different hyphenation results on different installations of \TeX\
using the same patterns. The |overflow| stops are necessary for portability
of patterns.

@<Declare procedures for preprocessing hyph...@>=
function new_trie_op(@!d,@!n:small_number;@!v:quarterword):quarterword;
label exit;
var h:-trie_op_size..trie_op_size; {trial hash location}
@!u:quarterword; {trial op code}
@!l:0..trie_op_size; {pointer to stored data}
begin h:=abs(n+313*d+361*v+1009*cur_lang) mod (trie_op_size+trie_op_size)
  - trie_op_size;
loop@+  begin l:=trie_op_hash[h];
  if l=0 then {empty position found for a new op}
    begin if trie_op_ptr=trie_op_size then
      overflow("pattern memory ops",trie_op_size);
    u:=trie_used[cur_lang];
    if u=max_quarterword then
      overflow("pattern memory ops per language",
        max_quarterword-min_quarterword);
    incr(trie_op_ptr); incr(u); trie_used[cur_lang]:=u;
    hyf_distance[trie_op_ptr]:=d;
    hyf_num[trie_op_ptr]:=n; hyf_next[trie_op_ptr]:=v;
    trie_op_lang[trie_op_ptr]:=cur_lang; trie_op_hash[h]:=trie_op_ptr;
    trie_op_val[trie_op_ptr]:=u; new_trie_op:=u; return;
    end;
  if (hyf_distance[l]=d)and(hyf_num[l]=n)and(hyf_next[l]=v)
   and(trie_op_lang[l]=cur_lang) then
    begin new_trie_op:=trie_op_val[l]; return;
    end;
  if h>-trie_op_size then decr(h)@+else h:=trie_op_size;
  end;
exit:end;

@ After |new_trie_op| has compressed the necessary opcode information,
plenty of information is available to unscramble the data into the
final form needed by our hyphenation algorithm.

@<Sort \(t)the hyphenation op tables into proper order@>=
op_start[0]:=-min_quarterword;
for j:=1 to 255 do op_start[j]:=op_start[j-1]+qo(trie_used[j-1]);
for j:=1 to trie_op_ptr do
  trie_op_hash[j]:=op_start[trie_op_lang[j]]+trie_op_val[j]; {destination}
for j:=1 to trie_op_ptr do while trie_op_hash[j]>j do
  begin k:=trie_op_hash[j];@/
  t:=hyf_distance[k]; hyf_distance[k]:=hyf_distance[j]; hyf_distance[j]:=t;@/
  t:=hyf_num[k]; hyf_num[k]:=hyf_num[j]; hyf_num[j]:=t;@/
  t:=hyf_next[k]; hyf_next[k]:=hyf_next[j]; hyf_next[j]:=t;@/
  trie_op_hash[j]:=trie_op_hash[k]; trie_op_hash[k]:=k;
  end

@ Before we forget how to initialize the data structures that have been
mentioned so far, let's write down the code that gets them started.

@<Initialize table entries...@>=
for k:=-trie_op_size to trie_op_size do trie_op_hash[k]:=0;
for k:=0 to 255 do trie_used[k]:=min_quarterword;
trie_op_ptr:=0;

@ The linked trie that is used to preprocess hyphenation patterns appears
in several global arrays. Each node represents an instruction of the form
``if you see character |c|, then perform operation |o|, move to the
next character, and go to node |l|; otherwise go to node |r|.''
The four quantities |c|, |o|, |l|, and |r| are stored in four arrays
|trie_c|, |trie_o|, |trie_l|, and |trie_r|. The root of the trie
is |trie_l[0]|, and the number of nodes is |trie_ptr|. Null trie
pointers are represented by zero. To initialize the trie, we simply
set |trie_l[0]| and |trie_ptr| to zero. We also set |trie_c[0]| to some
arbitrary value, since the algorithm may access it.

The algorithms maintain the condition
$$\hbox{|trie_c[trie_r[z]]>trie_c[z]|\qquad
whenever |z<>0| and |trie_r[z]<>0|};$$ in other words, sibling nodes are
ordered by their |c| fields.

@d trie_root==trie_l[0] {root of the linked trie}

@<Glob...@>=
@!init @!trie_c:packed array[trie_pointer] of packed_ASCII_code;
  {characters to match}
@t\hskip10pt@>@!trie_o:packed array[trie_pointer] of quarterword;
  {operations to perform}
@t\hskip10pt@>@!trie_l:packed array[trie_pointer] of trie_pointer;
  {left subtrie links}
@t\hskip10pt@>@!trie_r:packed array[trie_pointer] of trie_pointer;
  {right subtrie links}
@t\hskip10pt@>@!trie_ptr:trie_pointer; {the number of nodes in the trie}
@t\hskip10pt@>@!trie_hash:packed array[trie_pointer] of trie_pointer;
  {used to identify equivalent subtries}
tini

@ Let us suppose that a linked trie has already been constructed.
Experience shows that we can often reduce its size by recognizing common
subtries; therefore another hash table is introduced for this purpose,
somewhat similar to |trie_op_hash|. The new hash table will be
initialized to zero.

The function |trie_node(p)| returns |p| if |p| is distinct from other nodes
that it has seen, otherwise it returns the number of the first equivalent
node that it has seen.

Notice that we might make subtries equivalent even if they correspond to
patterns for different languages, in which the trie ops might mean quite
different things. That's perfectly all right.

@<Declare procedures for preprocessing hyph...@>=
function trie_node(@!p:trie_pointer):trie_pointer; {converts
  to a canonical form}
label exit;
var h:trie_pointer; {trial hash location}
@!q:trie_pointer; {trial trie node}
begin h:=abs(trie_c[p]+1009*trie_o[p]+@|
    2718*trie_l[p]+3142*trie_r[p]) mod trie_size;
loop@+  begin q:=trie_hash[h];
  if q=0 then
    begin trie_hash[h]:=p; trie_node:=p; return;
    end;
  if (trie_c[q]=trie_c[p])and(trie_o[q]=trie_o[p])and@|
    (trie_l[q]=trie_l[p])and(trie_r[q]=trie_r[p]) then
    begin trie_node:=q; return;
    end;
  if h>0 then decr(h)@+else h:=trie_size;
  end;
exit:end;

@ A neat recursive procedure is now able to compress a trie by
traversing it and applying |trie_node| to its nodes in ``bottom up''
fashion. We will compress the entire trie by clearing |trie_hash| to
zero and then saying `|trie_root:=compress_trie(trie_root)|'.
@^recursion@>

@<Declare procedures for preprocessing hyph...@>=
function compress_trie(@!p:trie_pointer):trie_pointer;
begin if p=0 then compress_trie:=0
else  begin trie_l[p]:=compress_trie(trie_l[p]);
  trie_r[p]:=compress_trie(trie_r[p]);
  compress_trie:=trie_node(p);
  end;
end;

@ The compressed trie will be packed into the |trie| array using a
``top-down first-fit'' procedure. This is a little tricky, so the reader
should pay close attention: The |trie_hash| array is cleared to zero
again and renamed |trie_ref| for this phase of the operation; later on,
|trie_ref[p]| will be nonzero only if the linked trie node |p| is the
smallest character
in a family and if the characters |c| of that family have been allocated to
locations |trie_ref[p]+c| in the |trie| array. Locations of |trie| that
are in use will have |trie_link=0|, while the unused holes in |trie|
will be doubly linked with |trie_link| pointing to the next larger vacant
location and |trie_back| pointing to the next smaller one. This double
linking will have been carried out only as far as |trie_max|, where
|trie_max| is the largest index of |trie| that will be needed.
To save time at the low end of the trie, we maintain array entries
|trie_min[c]| pointing to the smallest hole that is greater than~|c|.
Another array |trie_taken| tells whether or not a given location is
equal to |trie_ref[p]| for some |p|; this array is used to ensure that
distinct nodes in the compressed trie will have distinct |trie_ref|
entries.

@d trie_ref==trie_hash {where linked trie families go into |trie|}
@d trie_back(#)==trie[#].lh {backward links in |trie| holes}

@<Glob...@>=
@!init@!trie_taken:packed array[1..trie_size] of boolean;
  {does a family start here?}
@t\hskip10pt@>@!trie_min:array[ASCII_code] of trie_pointer;
  {the first possible slot for each character}
@t\hskip10pt@>@!trie_max:trie_pointer; {largest location used in |trie|}
@t\hskip10pt@>@!trie_not_ready:boolean; {is the trie still in linked form?}
tini

@ Each time \.{\\patterns} appears, it contributes further patterns to
the future trie, which will be built only when hyphenation is attempted or
when a format file is dumped. The boolean variable |trie_not_ready|
will change to |false| when the trie is compressed; this will disable
further patterns.

@<Initialize table entries...@>=
trie_not_ready:=true; trie_root:=0; trie_c[0]:=si(0); trie_ptr:=0;

@ Here is how the trie-compression data structures are initialized.
If storage is tight, it would be possible to overlap |trie_op_hash|,
|trie_op_lang|, and |trie_op_val| with |trie|, |trie_hash|, and |trie_taken|,
because we finish with the former just before we need the latter.

@<Get ready to compress the trie@>=
@<Sort \(t)the hyphenation...@>;
for p:=0 to trie_size do trie_hash[p]:=0;
trie_root:=compress_trie(trie_root); {identify equivalent subtries}
for p:=0 to trie_ptr do trie_ref[p]:=0;
for p:=0 to 255 do trie_min[p]:=p+1;
trie_link(0):=1; trie_max:=0

@ The |first_fit| procedure finds the smallest hole |z| in |trie| such that
a trie family starting at a given node |p| will fit into vacant positions
starting at |z|. If |c=trie_c[p]|, this means that location |z-c| must
not already be taken by some other family, and that |z-c+@t$c^\prime$@>|
must be vacant for all characters $c^\prime$ in the family. The procedure
sets |trie_ref[p]| to |z-c| when the first fit has been found.

@<Declare procedures for preprocessing hyph...@>=
procedure first_fit(@!p:trie_pointer); {packs a family into |trie|}
label not_found,found;
var h:trie_pointer; {candidate for |trie_ref[p]|}
@!z:trie_pointer; {runs through holes}
@!q:trie_pointer; {runs through the family starting at |p|}
@!c:ASCII_code; {smallest character in the family}
@!l,@!r:trie_pointer; {left and right neighbors}
@!ll:1..256; {upper limit of |trie_min| updating}
begin c:=so(trie_c[p]);
z:=trie_min[c]; {get the first conceivably good hole}
loop@+  begin h:=z-c;@/
  @<Ensure that |trie_max>=h+256|@>;
  if trie_taken[h] then goto not_found;
  @<If all characters of the family fit relative to |h|, then
    |goto found|,\30\ otherwise |goto not_found|@>;
  not_found: z:=trie_link(z); {move to the next hole}
  end;
found: @<Pack the family into |trie| relative to |h|@>;
end;

@ By making sure that |trie_max| is at least |h+256|, we can be sure that
|trie_max>z|, since |h=z-c|. It follows that location |trie_max| will
never be occupied in |trie|, and we will have |trie_max>=trie_link(z)|.

@<Ensure that |trie_max>=h+256|@>=
if trie_max<h+256 then
  begin if trie_size<=h+256 then overflow("pattern memory",trie_size);
@:TeX capacity exceeded pattern memory}{\quad pattern memory@>
  repeat incr(trie_max); trie_taken[trie_max]:=false;
  trie_link(trie_max):=trie_max+1; trie_back(trie_max):=trie_max-1;
  until trie_max=h+256;
  end

@ @<If all characters of the family fit relative to |h|...@>=
q:=trie_r[p];
while q>0 do
  begin if trie_link(h+so(trie_c[q]))=0 then goto not_found;
  q:=trie_r[q];
  end;
goto found

@ @<Pack the family into |trie| relative to |h|@>=
trie_taken[h]:=true; trie_ref[p]:=h; q:=p;
repeat z:=h+so(trie_c[q]); l:=trie_back(z); r:=trie_link(z);
trie_back(r):=l; trie_link(l):=r; trie_link(z):=0;
if l<256 then
  begin if z<256 then ll:=z @+else ll:=256;
  repeat trie_min[l]:=r; incr(l);
  until l=ll;
  end;
q:=trie_r[q];
until q=0

@ To pack the entire linked trie, we use the following recursive procedure.
@^recursion@>

@<Declare procedures for preprocessing hyph...@>=
procedure trie_pack(@!p:trie_pointer); {pack subtries of a family}
var q:trie_pointer; {a local variable that need not be saved on recursive calls}
begin repeat q:=trie_l[p];
if (q>0)and(trie_ref[q]=0) then
  begin first_fit(q); trie_pack(q);
  end;
p:=trie_r[p];
until p=0;
end;

@ When the whole trie has been allocated into the sequential table, we
must go through it once again so that |trie| contains the correct
information. Null pointers in the linked trie will be represented by the
value~0, which properly implements an ``empty'' family.

@<Move the data into |trie|@>=
h.rh:=0; h.b0:=min_quarterword; h.b1:=min_quarterword; {|trie_link:=0|,
  |trie_op:=min_quarterword|, |trie_char:=qi(0)|}
if trie_root=0 then {no patterns were given}
  begin for r:=0 to 256 do trie[r]:=h;
  trie_max:=256;
  end
else begin trie_fix(trie_root); {this fixes the non-holes in |trie|}
  r:=0; {now we will zero out all the holes}
  repeat s:=trie_link(r); trie[r]:=h; r:=s;
  until r>trie_max;
  end;
trie_char(0):=qi("?"); {make |trie_char(c)<>c| for all |c|}

@ The fixing-up procedure is, of course, recursive. Since the linked trie
usually has overlapping subtries, the same data may be moved several
times; but that causes no harm, and at most as much work is done as it
took to build the uncompressed trie.
@^recursion@>

@<Declare procedures for preprocessing hyph...@>=
procedure trie_fix(@!p:trie_pointer); {moves |p| and its siblings into |trie|}
var q:trie_pointer; {a local variable that need not be saved on recursive calls}
@!c:ASCII_code; {another one that need not be saved}
@!z:trie_pointer; {|trie| reference; this local variable must be saved}
begin z:=trie_ref[p];
repeat q:=trie_l[p]; c:=so(trie_c[p]);
trie_link(z+c):=trie_ref[q]; trie_char(z+c):=qi(c); trie_op(z+c):=trie_o[p];
if q>0 then trie_fix(q);
p:=trie_r[p];
until p=0;
end;

@ Now let's go back to the easier problem, of building the linked
trie.  When \.{INITEX} has scanned the `\.{\\patterns}' control
sequence, it calls on |new_patterns| to do the right thing.

@<Declare procedures for preprocessing hyph...@>=
procedure new_patterns; {initializes the hyphenation pattern data}
label done, done1;
var k,@!l:0..64; {indices into |hc| and |hyf|;
                  not always in |small_number| range}
@!digit_sensed:boolean; {should the next digit be treated as a letter?}
@!v:quarterword; {trie op code}
@!p,@!q:trie_pointer; {nodes of trie traversed during insertion}
@!first_child:boolean; {is |p=trie_l[q]|?}
@!c:ASCII_code; {character being inserted}
begin if trie_not_ready then
  begin set_cur_lang; scan_left_brace; {a left brace must follow \.{\\patterns}}
  @<Enter all of the patterns into a linked trie, until coming to a right
  brace@>;
  end
else begin print_err("Too late for "); print_esc("patterns");
  help1("All patterns must be given before typesetting begins.");
  error; link(garbage):=scan_toks(false,false); flush_list(def_ref);
  end;
end;

@ Novices are not supposed to be using \.{\\patterns}, so the error
messages are terse. (Note that all error messages appear in \TeX's string
pool, even if they are used only by \.{INITEX}.)

@<Enter all of the patterns into a linked trie...@>=
k:=0; hyf[0]:=0; digit_sensed:=false;
loop@+  begin get_x_token;
  case cur_cmd of
  letter,other_char:@<Append a new letter or a hyphen level@>;
  spacer,right_brace: begin if k>0 then
      @<Insert a new pattern into the linked trie@>;
    if cur_cmd=right_brace then goto done;
    k:=0; hyf[0]:=0; digit_sensed:=false;
    end;
  othercases begin print_err("Bad "); print_esc("patterns");
@.Bad \\patterns@>
    help1("(See Appendix H.)"); error;
    end
  endcases;
  end;
done:

@ @<Append a new letter or a hyphen level@>=
if digit_sensed or(cur_chr<"0")or(cur_chr>"9") then
  begin if cur_chr="." then cur_chr:=0 {edge-of-word delimiter}
  else  begin cur_chr:=lc_code(cur_chr);
    if cur_chr=0 then
      begin print_err("Nonletter");
@.Nonletter@>
      help1("(See Appendix H.)"); error;
      end;
    end;
  if k<63 then
    begin incr(k); hc[k]:=cur_chr; hyf[k]:=0; digit_sensed:=false;
    end;
  end
else if k<63 then
  begin hyf[k]:=cur_chr-"0"; digit_sensed:=true;
  end

@ When the following code comes into play, the pattern $p_1\ldots p_k$
appears in |hc[1..k]|, and the corresponding sequence of numbers $n_0\ldots
n_k$ appears in |hyf[0..k]|.

@<Insert a new pattern into the linked trie@>=
begin @<Compute the trie op code, |v|, and set |l:=0|@>;
q:=0; hc[0]:=cur_lang;
while l<=k do
  begin c:=hc[l]; incr(l); p:=trie_l[q]; first_child:=true;
  while (p>0)and(c>so(trie_c[p])) do
    begin q:=p; p:=trie_r[q]; first_child:=false;
    end;
  if (p=0)or(c<so(trie_c[p])) then
    @<Insert a new trie node between |q| and |p|, and
      make |p| point to it@>;
  q:=p; {now node |q| represents $p_1\ldots p_{l-1}$}
  end;
if trie_o[q]<>min_quarterword then
  begin print_err("Duplicate pattern");
@.Duplicate pattern@>
  help1("(See Appendix H.)"); error;
  end;
trie_o[q]:=v;
end

@ @<Insert a new trie node between |q| and |p|...@>=
begin if trie_ptr=trie_size then overflow("pattern memory",trie_size);
@:TeX capacity exceeded pattern memory}{\quad pattern memory@>
incr(trie_ptr); trie_r[trie_ptr]:=p; p:=trie_ptr; trie_l[p]:=0;
if first_child then trie_l[q]:=p@+else trie_r[q]:=p;
trie_c[p]:=si(c); trie_o[p]:=min_quarterword;
end

@ @<Compute the trie op code, |v|...@>=
if hc[1]=0 then hyf[0]:=0;
if hc[k]=0 then hyf[k]:=0;
l:=k; v:=min_quarterword;
loop@+  begin if hyf[l]<>0 then v:=new_trie_op(k-l,hyf[l],v);
  if l>0 then decr(l)@+else goto done1;
  end;
done1:

@ Finally we put everything together: Here is how the trie gets to its
final, efficient form.
The following packing routine is rigged so that the root of the linked
tree gets mapped into location 1 of |trie|, as required by the hyphenation
algorithm. This happens because the first call of |first_fit| will
``take'' location~1.

@<Declare procedures for preprocessing hyphenation patterns@>=
procedure init_trie;
var @!p:trie_pointer; {pointer for initialization}
@!j,@!k,@!t:integer; {all-purpose registers for initialization}
@!r,@!s:trie_pointer; {used to clean up the packed |trie|}
@!h:two_halves; {template used to zero out |trie|'s holes}
begin @<Get ready to compress the trie@>;
if trie_root<>0 then
  begin first_fit(trie_root); trie_pack(trie_root);
  end;
@<Move the data into |trie|@>;
trie_not_ready:=false;
end;

@* \[44] Breaking vertical lists into pages.
The |vsplit| procedure, which implements \TeX's \.{\\vsplit} operation,
is considerably simpler than |line_break| because it doesn't have to
worry about hyphenation, and because its mission is to discover a single
break instead of an optimum sequence of breakpoints.  But before we get
into the details of |vsplit|, we need to consider a few more basic things.

@ A subroutine called |prune_page_top| takes a pointer to a vlist and
returns a pointer to a modified vlist in which all glue, kern, and penalty nodes
have been deleted before the first box or rule node. However, the first
box or rule is actually preceded by a newly created glue node designed so that
the topmost baseline will be at distance |split_top_skip| from the top,
whenever this is possible without backspacing.

In this routine and those that follow, we make use of the fact that a
vertical list contains no character nodes, hence the |type| field exists
for each node in the list.
@^data structure assumptions@>

@p function prune_page_top(@!p:pointer):pointer; {adjust top after page break}
var prev_p:pointer; {lags one step behind |p|}
@!q:pointer; {temporary variable for list manipulation}
begin prev_p:=temp_head; link(temp_head):=p;
while p<>null do
  case type(p) of
  hlist_node,vlist_node,rule_node:@<Insert glue for |split_top_skip|
    and set~|p:=null|@>;
  whatsit_node,mark_node,ins_node: begin prev_p:=p; p:=link(prev_p);
    end;
  glue_node,kern_node,penalty_node: begin q:=p; p:=link(q); link(q):=null;
    link(prev_p):=p; flush_node_list(q);
    end;
  othercases confusion("pruning")
@:this can't happen pruning}{\quad pruning@>
  endcases;
prune_page_top:=link(temp_head);
end;

@ @<Insert glue for |split_top_skip|...@>=
begin q:=new_skip_param(split_top_skip_code); link(prev_p):=q; link(q):=p;
  {now |temp_ptr=glue_ptr(q)|}
if width(temp_ptr)>height(p) then width(temp_ptr):=width(temp_ptr)-height(p)
else width(temp_ptr):=0;
p:=null;
end

@ The next subroutine finds the best place to break a given vertical list
so as to obtain a box of height~|h|, with maximum depth~|d|.
A pointer to the beginning of the vertical list is given,
and a pointer to the optimum breakpoint is returned. The list is effectively
followed by a forced break, i.e., a penalty node with the |eject_penalty|;
if the best break occurs at this artificial node, the value |null| is returned.

An array of six |scaled| distances is used to keep track of the height
from the beginning of the list to the current place, just as in |line_break|.
In fact, we use one of the same arrays, only changing its name to reflect
its new significance.

@d active_height==active_width {new name for the six distance variables}
@d cur_height==active_height[1] {the natural height}
@d set_height_zero(#)==active_height[#]:=0 {initialize the height to zero}
@#
@d update_heights=90 {go here to record glue in the |active_height| table}

@p function vert_break(@!p:pointer; @!h,@!d:scaled):pointer;
  {finds optimum page break}
label done,not_found,update_heights;
var prev_p:pointer; {if |p| is a glue node, |type(prev_p)| determines
  whether |p| is a legal breakpoint}
@!q,@!r:pointer; {glue specifications}
@!pi:integer; {penalty value}
@!b:integer; {badness at a trial breakpoint}
@!least_cost:integer; {the smallest badness plus penalties found so far}
@!best_place:pointer; {the most recent break that leads to |least_cost|}
@!prev_dp:scaled; {depth of previous box in the list}
@!t:small_number; {|type| of the node following a kern}
begin prev_p:=p; {an initial glue node is not a legal breakpoint}
least_cost:=awful_bad; do_all_six(set_height_zero); prev_dp:=0;
loop@+  begin @<If node |p| is a legal breakpoint, check if this break is
    the best known, and |goto done| if |p| is null or
    if the page-so-far is already too full to accept more stuff@>;
  prev_p:=p; p:=link(prev_p);
  end;
done: vert_break:=best_place;
end;

@ A global variable |best_height_plus_depth| will be set to the natural size
of the box that corresponds to the optimum breakpoint found by |vert_break|.
(This value is used by the insertion-splitting algorithm of the page builder.)

@<Glob...@>=
@!best_height_plus_depth:scaled; {height of the best box, without stretching or
  shrinking}

@ A subtle point to be noted here is that the maximum depth~|d| might be
negative, so |cur_height| and |prev_dp| might need to be corrected even
after a glue or kern node.

@<If node |p| is a legal breakpoint, check...@>=
if p=null then pi:=eject_penalty
else  @<Use node |p| to update the current height and depth measurements;
    if this node is not a legal breakpoint, |goto not_found|
    or |update_heights|,
    otherwise set |pi| to the associated penalty at the break@>;
@<Check if node |p| is a new champion breakpoint; then \(go)|goto done|
  if |p| is a forced break or if the page-so-far is already too full@>;
if (type(p)<glue_node)or(type(p)>kern_node) then goto not_found;
update_heights: @<Update the current height and depth measurements with
  respect to a glue or kern node~|p|@>;
not_found: if prev_dp>d then
    begin cur_height:=cur_height+prev_dp-d;
    prev_dp:=d;
    end;

@ @<Use node |p| to update the current height and depth measurements...@>=
case type(p) of
hlist_node,vlist_node,rule_node: begin@t@>@;@/
  cur_height:=cur_height+prev_dp+height(p); prev_dp:=depth(p);
  goto not_found;
  end;
whatsit_node:@<Process whatsit |p| in |vert_break| loop, |goto not_found|@>;
glue_node: if precedes_break(prev_p) then pi:=0
  else goto update_heights;
kern_node: begin if link(p)=null then t:=penalty_node
  else t:=type(link(p));
  if t=glue_node then pi:=0@+else goto update_heights;
  end;
penalty_node: pi:=penalty(p);
mark_node,ins_node: goto not_found;
othercases confusion("vertbreak")
@:this can't happen vertbreak}{\quad vertbreak@>
endcases

@ @d deplorable==100000 {more than |inf_bad|, but less than |awful_bad|}

@<Check if node |p| is a new champion breakpoint; then \(go)...@>=
if pi<inf_penalty then
  begin @<Compute the badness, |b|, using |awful_bad|
    if the box is too full@>;
  if b<awful_bad then
    if pi<=eject_penalty then b:=pi
    else if b<inf_bad then b:=b+pi
      else b:=deplorable;
  if b<=least_cost then
    begin best_place:=p; least_cost:=b;
    best_height_plus_depth:=cur_height+prev_dp;
    end;
  if (b=awful_bad)or(pi<=eject_penalty) then goto done;
  end

@ @<Compute the badness, |b|, using |awful_bad| if the box is too full@>=
if cur_height<h then
  if (active_height[3]<>0) or (active_height[4]<>0) or
    (active_height[5]<>0) then b:=0
  else b:=badness(h-cur_height,active_height[2])
else if cur_height-h>active_height[6] then b:=awful_bad
else b:=badness(cur_height-h,active_height[6])

@ Vertical lists that are subject to the |vert_break| procedure should not
contain infinite shrinkability, since that would permit any amount of
information to ``fit'' on one page.

@<Update the current height and depth measurements with...@>=
if type(p)=kern_node then q:=p
else  begin q:=glue_ptr(p);
  active_height[2+stretch_order(q)]:=@|
    active_height[2+stretch_order(q)]+stretch(q);@/
  active_height[6]:=active_height[6]+shrink(q);
  if (shrink_order(q)<>normal)and(shrink(q)<>0) then
    begin@t@>@;@/
    print_err("Infinite glue shrinkage found in box being split");@/
@.Infinite glue shrinkage...@>
    help4("The box you are \vsplitting contains some infinitely")@/
      ("shrinkable glue, e.g., `\vss' or `\vskip 0pt minus 1fil'.")@/
      ("Such glue doesn't belong there; but you can safely proceed,")@/
      ("since the offensive shrinkability has been made finite.");
    error; r:=new_spec(q); shrink_order(r):=normal; delete_glue_ref(q);
    glue_ptr(p):=r; q:=r;
    end;
  end;
cur_height:=cur_height+prev_dp+width(q); prev_dp:=0

@ Now we are ready to consider |vsplit| itself. Most of
its work is accomplished by the two subroutines that we have just considered.

Given the number of a vlist box |n|, and given a desired page height |h|,
the |vsplit| function finds the best initial segment of the vlist and
returns a box for a page of height~|h|. The remainder of the vlist, if
any, replaces the original box, after removing glue and penalties and
adjusting for |split_top_skip|. Mark nodes in the split-off box are used to
set the values of |split_first_mark| and |split_bot_mark|; we use the
fact that |split_first_mark=null| if and only if |split_bot_mark=null|.

The original box becomes ``void'' if and only if it has been entirely
extracted.  The extracted box is ``void'' if and only if the original
box was void (or if it was, erroneously, an hlist box).

@p function vsplit(@!n:eight_bits; @!h:scaled):pointer;
  {extracts a page of height |h| from box |n|}
label exit,done;
var v:pointer; {the box to be split}
p:pointer; {runs through the vlist}
q:pointer; {points to where the break occurs}
begin v:=box(n);
if split_first_mark<>null then
  begin delete_token_ref(split_first_mark); split_first_mark:=null;
  delete_token_ref(split_bot_mark); split_bot_mark:=null;
  end;
@<Dispense with trivial cases of void or bad boxes@>;
q:=vert_break(list_ptr(v),h,split_max_depth);
@<Look at all the marks in nodes before the break, and set the final
  link to |null| at the break@>;
q:=prune_page_top(q); p:=list_ptr(v); free_node(v,box_node_size);
if q=null then box(n):=null {the |eq_level| of the box stays the same}
else box(n):=vpack(q,natural);
vsplit:=vpackage(p,h,exactly,split_max_depth);
exit: end;

@ @<Dispense with trivial cases of void or bad boxes@>=
if v=null then
  begin vsplit:=null; return;
  end;
if type(v)<>vlist_node then
  begin print_err(""); print_esc("vsplit"); print(" needs a ");
  print_esc("vbox");
@:vsplit_}{\.{\\vsplit needs a \\vbox}@>
  help2("The box you are trying to split is an \hbox.")@/
  ("I can't split such a box, so I'll leave it alone.");
  error; vsplit:=null; return;
  end

@ It's possible that the box begins with a penalty node that is the
``best'' break, so we must be careful to handle this special case correctly.

@<Look at all the marks...@>=
p:=list_ptr(v);
if p=q then list_ptr(v):=null
else loop@+begin if type(p)=mark_node then
    if split_first_mark=null then
      begin split_first_mark:=mark_ptr(p);
      split_bot_mark:=split_first_mark;
      token_ref_count(split_first_mark):=@|
        token_ref_count(split_first_mark)+2;
      end
    else  begin delete_token_ref(split_bot_mark);
      split_bot_mark:=mark_ptr(p);
      add_token_ref(split_bot_mark);
      end;
  if link(p)=q then
    begin link(p):=null; goto done;
    end;
  p:=link(p);
  end;
done:

@* \[45] The page builder.
When \TeX\ appends new material to its main vlist in vertical mode, it uses
a method something like |vsplit| to decide where a page ends, except that
the calculations are done ``on line'' as new items come in.
The main complication in this process is that insertions must be put
into their boxes and removed from the vlist, in a more-or-less optimum manner.

We shall use the term ``current page'' for that part of the main vlist that
is being considered as a candidate for being broken off and sent to the
user's output routine. The current page starts at |link(page_head)|, and
it ends at |page_tail|.  We have |page_head=page_tail| if this list is empty.
@^current page@>

Utter chaos would reign if the user kept changing page specifications
while a page is being constructed, so the page builder keeps the pertinent
specifications frozen as soon as the page receives its first box or
insertion.  The global variable |page_contents| is |empty| when the
current page contains only mark nodes and content-less whatsit nodes; it
is |inserts_only| if the page contains only insertion nodes in addition to
marks and whatsits.  Glue nodes, kern nodes, and penalty nodes are
discarded until a box or rule node appears, at which time |page_contents|
changes to |box_there|.  As soon as |page_contents| becomes non-|empty|,
the current |vsize| and |max_depth| are squirreled away into |page_goal|
and |page_max_depth|; the latter values will be used until the page has
been forwarded to the user's output routine. The \.{\\topskip} adjustment
is made when |page_contents| changes to |box_there|.

Although |page_goal| starts out equal to |vsize|, it is decreased by the
scaled natural height-plus-depth of the insertions considered so far, and by
the \.{\\skip} corrections for those insertions. Therefore it represents
the size into which the non-inserted material should fit, assuming that
all insertions in the current page have been made.

The global variables |best_page_break| and |least_page_cost| correspond
respectively to the local variables |best_place| and |least_cost| in the
|vert_break| routine that we have already studied; i.e., they record the
location and value of the best place currently known for breaking the
current page. The value of |page_goal| at the time of the best break is
stored in |best_size|.

@d inserts_only=1
  {|page_contents| when an insert node has been contributed, but no boxes}
@d box_there=2 {|page_contents| when a box or rule has been contributed}

@<Glob...@>=
@!page_tail:pointer; {the final node on the current page}
@!page_contents:empty..box_there; {what is on the current page so far?}
@!page_max_depth:scaled; {maximum box depth on page being built}
@!best_page_break:pointer; {break here to get the best page known so far}
@!least_page_cost:integer; {the score for this currently best page}
@!best_size:scaled; {its |page_goal|}

@ The page builder has another data structure to keep track of insertions.
This is a list of four-word nodes, starting and ending at |page_ins_head|.
That is, the first element of the list is node |r@t$_1$@>=link(page_ins_head)|;
node $r_j$ is followed by |r@t$_{j+1}$@>=link(r@t$_j$@>)|; and if there are
|n| items we have |r@t$_{n+1}$@>=page_ins_head|. The |subtype| field of
each node in this list refers to an insertion number; for example, `\.{\\insert
250}' would correspond to a node whose |subtype| is |qi(250)|
(the same as the |subtype| field of the relevant |ins_node|). These |subtype|
fields are in increasing order, and |subtype(page_ins_head)=
qi(255)|, so |page_ins_head| serves as a convenient sentinel
at the end of the list. A record is present for each insertion number that
appears in the current page.

The |type| field in these nodes distinguishes two possibilities that
might occur as we look ahead before deciding on the optimum page break.
If |type(r)=inserting|, then |height(r)| contains the total of the
height-plus-depth dimensions of the box and all its inserts seen so far.
If |type(r)=split_up|, then no more insertions will be made into this box,
because at least one previous insertion was too big to fit on the current
page; |broken_ptr(r)| points to the node where that insertion will be
split, if \TeX\ decides to split it, |broken_ins(r)| points to the
insertion node that was tentatively split, and |height(r)| includes also the
natural height plus depth of the part that would be split off.

In both cases, |last_ins_ptr(r)| points to the last |ins_node|
encountered for box |qo(subtype(r))| that would be at least partially
inserted on the next page; and |best_ins_ptr(r)| points to the last
such |ins_node| that should actually be inserted, to get the page with
minimum badness among all page breaks considered so far. We have
|best_ins_ptr(r)=null| if and only if no insertion for this box should
be made to produce this optimum page.

The data structure definitions here use the fact that the |@!height| field
appears in the fourth word of a box node.
@^data structure assumptions@>

@d page_ins_node_size=4 {number of words for a page insertion node}
@d inserting=0 {an insertion class that has not yet overflowed}
@d split_up=1 {an overflowed insertion class}
@d broken_ptr(#)==link(#+1)
  {an insertion for this class will break here if anywhere}
@d broken_ins(#)==info(#+1) {this insertion might break at |broken_ptr|}
@d last_ins_ptr(#)==link(#+2) {the most recent insertion for this |subtype|}
@d best_ins_ptr(#)==info(#+2) {the optimum most recent insertion}

@<Initialize the special list heads...@>=
subtype(page_ins_head):=qi(255);
type(page_ins_head):=split_up; link(page_ins_head):=page_ins_head;

@ An array |page_so_far| records the heights and depths of everything
on the current page. This array contains six |scaled| numbers, like the
similar arrays already considered in |line_break| and |vert_break|; and it
also contains |page_goal| and |page_depth|, since these values are
all accessible to the user via |set_page_dimen| commands. The
value of |page_so_far[1]| is also called |page_total|.  The stretch
and shrink components of the \.{\\skip} corrections for each insertion are
included in |page_so_far|, but the natural space components of these
corrections are not, since they have been subtracted from |page_goal|.

The variable |page_depth| records the depth of the current page; it has been
adjusted so that it is at most |page_max_depth|. The variable
|last_glue| points to the glue specification of the most recent node
contributed from the contribution list, if this was a glue node; otherwise
|last_glue=max_halfword|. (If the contribution list is nonempty,
however, the value of |last_glue| is not necessarily accurate.)
The variables |last_penalty| and |last_kern| are similar.  And
finally, |insert_penalties| holds the sum of the penalties associated with
all split and floating insertions.

@d page_goal==page_so_far[0] {desired height of information on page being built}
@d page_total==page_so_far[1] {height of the current page}
@d page_shrink==page_so_far[6] {shrinkability of the current page}
@d page_depth==page_so_far[7] {depth of the current page}

@<Glob...@>=
@!page_so_far:array [0..7] of scaled; {height and glue of the current page}
@!last_glue:pointer; {used to implement \.{\\lastskip}}
@!last_penalty:integer; {used to implement \.{\\lastpenalty}}
@!last_kern:scaled; {used to implement \.{\\lastkern}}
@!insert_penalties:integer; {sum of the penalties for held-over insertions}

@ @<Put each...@>=
primitive("pagegoal",set_page_dimen,0);
@!@:page_goal_}{\.{\\pagegoal} primitive@>
primitive("pagetotal",set_page_dimen,1);
@!@:page_total_}{\.{\\pagetotal} primitive@>
primitive("pagestretch",set_page_dimen,2);
@!@:page_stretch_}{\.{\\pagestretch} primitive@>
primitive("pagefilstretch",set_page_dimen,3);
@!@:page_fil_stretch_}{\.{\\pagefilstretch} primitive@>
primitive("pagefillstretch",set_page_dimen,4);
@!@:page_fill_stretch_}{\.{\\pagefillstretch} primitive@>
primitive("pagefilllstretch",set_page_dimen,5);
@!@:page_filll_stretch_}{\.{\\pagefilllstretch} primitive@>
primitive("pageshrink",set_page_dimen,6);
@!@:page_shrink_}{\.{\\pageshrink} primitive@>
primitive("pagedepth",set_page_dimen,7);
@!@:page_depth_}{\.{\\pagedepth} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
set_page_dimen: case chr_code of
0: print_esc("pagegoal");
1: print_esc("pagetotal");
2: print_esc("pagestretch");
3: print_esc("pagefilstretch");
4: print_esc("pagefillstretch");
5: print_esc("pagefilllstretch");
6: print_esc("pageshrink");
othercases print_esc("pagedepth")
endcases;

@ @d print_plus_end(#)==print(#);@+end
@d print_plus(#)==if page_so_far[#]<>0 then
  begin print(" plus "); print_scaled(page_so_far[#]); print_plus_end

@p procedure print_totals;
begin print_scaled(page_total);
print_plus(2)("");
print_plus(3)("fil");
print_plus(4)("fill");
print_plus(5)("filll");
if page_shrink<>0 then
  begin print(" minus "); print_scaled(page_shrink);
  end;
end;

@ @<Show the status of the current page@>=
if page_head<>page_tail then
  begin print_nl("### current page:");
  if output_active then print(" (held over for next output)");
@.held over for next output@>
  show_box(link(page_head));
  if page_contents>empty then
    begin print_nl("total height "); print_totals;
@:total_height}{\.{total height}@>
    print_nl(" goal height "); print_scaled(page_goal);
@.goal height@>
    r:=link(page_ins_head);
    while r<>page_ins_head do
      begin print_ln; print_esc("insert"); t:=qo(subtype(r));
      print_int(t); print(" adds ");
      t:=x_over_n(height(r),1000)*count(t); print_scaled(t);
      if type(r)=split_up then
        begin q:=page_head; t:=0;
        repeat q:=link(q);
        if (type(q)=ins_node)and(subtype(q)=subtype(r)) then incr(t);
        until q=broken_ins(r);
        print(", #"); print_int(t); print(" might split");
        end;
      r:=link(r);
      end;
    end;
  end

@ Here is a procedure that is called when the |page_contents| is changing
from |empty| to |inserts_only| or |box_there|.

@d set_page_so_far_zero(#)==page_so_far[#]:=0

@p procedure freeze_page_specs(@!s:small_number);
begin page_contents:=s;
page_goal:=vsize; page_max_depth:=max_depth;
page_depth:=0; do_all_six(set_page_so_far_zero);
least_page_cost:=awful_bad;
@!stat if tracing_pages>0 then
  begin begin_diagnostic;
  print_nl("%% goal height="); print_scaled(page_goal);
@.goal height@>
  print(", max depth="); print_scaled(page_max_depth);
  end_diagnostic(false);
  end;@;@+tats@;@/
end;

@ Pages are built by appending nodes to the current list in \TeX's
vertical mode, which is at the outermost level of the semantic nest. This
vlist is split into two parts; the ``current page'' that we have been
talking so much about already, and the ``contribution list'' that receives
new nodes as they are created.  The current page contains everything that
the page builder has accounted for in its data structures, as described
above, while the contribution list contains other things that have been
generated by other parts of \TeX\ but have not yet been
seen by the page builder.
The contribution list starts at |link(contrib_head)|, and it ends at the
current node in \TeX's vertical mode.

When \TeX\ has appended new material in vertical mode, it calls the procedure
|build_page|, which tries to catch up by moving nodes from the contribution
list to the current page. This procedure will succeed in its goal of
emptying the contribution list, unless a page break is discovered, i.e.,
unless the current page has grown to the point where the optimum next
page break has been determined. In the latter case, the nodes after the
optimum break will go back onto the contribution list, and control will
effectively pass to the user's output routine.

We make |type(page_head)=glue_node|, so that an initial glue node on
the current page will not be considered a valid breakpoint.

@<Initialize the special list...@>=
type(page_head):=glue_node; subtype(page_head):=normal;

@ The global variable |output_active| is true during the time the
user's output routine is driving \TeX.

@<Glob...@>=
@!output_active:boolean; {are we in the midst of an output routine?}

@ @<Set init...@>=
output_active:=false; insert_penalties:=0;

@ The page builder is ready to start a fresh page if we initialize
the following state variables. (However, the page insertion list is initialized
elsewhere.)

@<Start a new current page@>=
page_contents:=empty; page_tail:=page_head; link(page_head):=null;@/
last_glue:=max_halfword; last_penalty:=0; last_kern:=0;
page_depth:=0; page_max_depth:=0

@ At certain times box 255 is supposed to be void (i.e., |null|),
or an insertion box is supposed to be ready to accept a vertical list.
If not, an error message is printed, and the following subroutine
flushes the unwanted contents, reporting them to the user.

@p procedure box_error(@!n:eight_bits);
begin error; begin_diagnostic;
print_nl("The following box has been deleted:");
@.The following...deleted@>
show_box(box(n)); end_diagnostic(true);
flush_node_list(box(n)); box(n):=null;
end;

@ The following procedure guarantees that a given box register
does not contain an \.{\\hbox}.

@p procedure ensure_vbox(@!n:eight_bits);
var p:pointer; {the box register contents}
begin p:=box(n);
if p<>null then if type(p)=hlist_node then
  begin print_err("Insertions can only be added to a vbox");
@.Insertions can only...@>
  help3("Tut tut: You're trying to \insert into a")@/
    ("\box register that now contains an \hbox.")@/
    ("Proceed, and I'll discard its present contents.");
  box_error(n);
  end;
end;

@ \TeX\ is not always in vertical mode at the time |build_page|
is called; the current mode reflects what \TeX\ should return to, after
the contribution list has been emptied. A call on |build_page| should
be immediately followed by `|goto big_switch|', which is \TeX's central
control point.

@d contribute=80 {go here to link a node into the current page}

@p @t\4@>@<Declare the procedure called |fire_up|@>@;@/
procedure build_page; {append contributions to the current page}
label exit,done,done1,continue,contribute,update_heights;
var p:pointer; {the node being appended}
@!q,@!r:pointer; {nodes being examined}
@!b,@!c:integer; {badness and cost of current page}
@!pi:integer; {penalty to be added to the badness}
@!n:min_quarterword..255; {insertion box number}
@!delta,@!h,@!w:scaled; {sizes used for insertion calculations}
begin if (link(contrib_head)=null)or output_active then return;
repeat continue: p:=link(contrib_head);@/
@<Update the values of |last_glue|, |last_penalty|, and |last_kern|@>;
@<Move node |p| to the current page; if it is time for a page break,
  put the nodes following the break back onto the contribution list,
  and |return| to the user's output routine if there is one@>;
until link(contrib_head)=null;
@<Make the contribution list empty by setting its tail to |contrib_head|@>;
exit:end;

@ @d contrib_tail==nest[0].tail_field {tail of the contribution list}

@<Make the contribution list empty...@>=
if nest_ptr=0 then tail:=contrib_head {vertical mode}
else contrib_tail:=contrib_head {other modes}

@ @<Update the values of |last_glue|...@>=
if last_glue<>max_halfword then delete_glue_ref(last_glue);
last_penalty:=0; last_kern:=0;
if type(p)=glue_node then
  begin last_glue:=glue_ptr(p); add_glue_ref(last_glue);
  end
else  begin last_glue:=max_halfword;
  if type(p)=penalty_node then last_penalty:=penalty(p)
  else if type(p)=kern_node then last_kern:=width(p);
  end

@ The code here is an example of a many-way switch into routines that
merge together in different places. Some people call this unstructured
programming, but the author doesn't see much wrong with it, as long as
@^Knuth, Donald Ervin@>
the various labels have a well-understood meaning.

@<Move node |p| to the current page; ...@>=
@<If the current page is empty and node |p| is to be deleted, |goto done1|;
  otherwise use node |p| to update the state of the current page;
  if this node is an insertion, |goto contribute|; otherwise if this node
  is not a legal breakpoint, |goto contribute| or |update_heights|;
  otherwise set |pi| to the penalty associated with this breakpoint@>;
@<Check if node |p| is a new champion breakpoint; then \(if)if it is time for
  a page break, prepare for output, and either fire up the user's
  output routine and |return| or ship out the page and |goto done|@>;
if (type(p)<glue_node)or(type(p)>kern_node) then goto contribute;
update_heights:@<Update the current page measurements with respect to the
  glue or kern specified by node~|p|@>;
contribute: @<Make sure that |page_max_depth| is not exceeded@>;
@<Link node |p| into the current page and |goto done|@>;
done1:@<Recycle node |p|@>;
done:

@ @<Link node |p| into the current page and |goto done|@>=
link(page_tail):=p; page_tail:=p;
link(contrib_head):=link(p); link(p):=null; goto done

@ @<Recycle node |p|@>=
link(contrib_head):=link(p); link(p):=null; flush_node_list(p)

@ The title of this section is already so long, it seems best to avoid
making it more accurate but still longer, by mentioning the fact that a
kern node at the end of the contribution list will not be contributed until
we know its successor.

@<If the current page is empty...@>=
case type(p) of
hlist_node,vlist_node,rule_node: if page_contents<box_there then
    @<Initialize the current page, insert the \.{\\topskip} glue
      ahead of |p|, and |goto continue|@>
  else @<Prepare to move a box or rule node to the current page,
    then |goto contribute|@>;
whatsit_node: @<Prepare to move whatsit |p| to the current page,
  then |goto contribute|@>;
glue_node: if page_contents<box_there then goto done1
  else if precedes_break(page_tail) then pi:=0
  else goto update_heights;
kern_node: if page_contents<box_there then goto done1
  else if link(p)=null then return
  else if type(link(p))=glue_node then pi:=0
  else goto update_heights;
penalty_node: if page_contents<box_there then goto done1@+else pi:=penalty(p);
mark_node: goto contribute;
ins_node: @<Append an insertion to the current page and |goto contribute|@>;
othercases confusion("page")
@:this can't happen page}{\quad page@>
endcases

@ @<Initialize the current page, insert the \.{\\topskip} glue...@>=
begin if page_contents=empty then freeze_page_specs(box_there)
else page_contents:=box_there;
q:=new_skip_param(top_skip_code); {now |temp_ptr=glue_ptr(q)|}
if width(temp_ptr)>height(p) then width(temp_ptr):=width(temp_ptr)-height(p)
else width(temp_ptr):=0;
link(q):=p; link(contrib_head):=q; goto continue;
end

@ @<Prepare to move a box or rule node to the current page...@>=
begin page_total:=page_total+page_depth+height(p);
page_depth:=depth(p);
goto contribute;
end

@ @<Make sure that |page_max_depth| is not exceeded@>=
if page_depth>page_max_depth then
  begin page_total:=@|
    page_total+page_depth-page_max_depth;@/
  page_depth:=page_max_depth;
  end;

@ @<Update the current page measurements with respect to the glue...@>=
if type(p)=kern_node then q:=p
else begin q:=glue_ptr(p);
  page_so_far[2+stretch_order(q)]:=@|
    page_so_far[2+stretch_order(q)]+stretch(q);@/
  page_shrink:=page_shrink+shrink(q);
  if (shrink_order(q)<>normal)and(shrink(q)<>0) then
    begin@t@>@;@/
    print_err("Infinite glue shrinkage found on current page");@/
@.Infinite glue shrinkage...@>
    help4("The page about to be output contains some infinitely")@/
      ("shrinkable glue, e.g., `\vss' or `\vskip 0pt minus 1fil'.")@/
      ("Such glue doesn't belong there; but you can safely proceed,")@/
      ("since the offensive shrinkability has been made finite.");
    error;
    r:=new_spec(q); shrink_order(r):=normal; delete_glue_ref(q);
    glue_ptr(p):=r; q:=r;
    end;
  end;
page_total:=page_total+page_depth+width(q); page_depth:=0

@ @<Check if node |p| is a new champion breakpoint; then \(if)...@>=
if pi<inf_penalty then
  begin @<Compute the badness, |b|, of the current page,
    using |awful_bad| if the box is too full@>;
  if b<awful_bad then
    if pi<=eject_penalty then c:=pi
    else  if b<inf_bad then c:=b+pi+insert_penalties
      else c:=deplorable
  else c:=b;
  if insert_penalties>=10000 then c:=awful_bad;
  @!stat if tracing_pages>0 then @<Display the page break cost@>;@+tats@;@/
  if c<=least_page_cost then
    begin best_page_break:=p; best_size:=page_goal;
    least_page_cost:=c;
    r:=link(page_ins_head);
    while r<>page_ins_head do
      begin best_ins_ptr(r):=last_ins_ptr(r);
      r:=link(r);
      end;
    end;
  if (c=awful_bad)or(pi<=eject_penalty) then
    begin fire_up(p); {output the current page at the best place}
    if output_active then return; {user's output routine will act}
    goto done; {the page has been shipped out by default output routine}
    end;
  end

@ @<Display the page break cost@>=
begin begin_diagnostic; print_nl("%");
print(" t="); print_totals;@/
print(" g="); print_scaled(page_goal);@/
print(" b=");
if b=awful_bad then print_char("*")@+else print_int(b);
@.*\relax@>
print(" p="); print_int(pi);
print(" c=");
if c=awful_bad then print_char("*")@+else print_int(c);
if c<=least_page_cost then print_char("#");
end_diagnostic(false);
end

@ @<Compute the badness, |b|, of the current page...@>=
if page_total<page_goal then
  if (page_so_far[3]<>0) or (page_so_far[4]<>0) or@|
    (page_so_far[5]<>0) then b:=0
  else b:=badness(page_goal-page_total,page_so_far[2])
else if page_total-page_goal>page_shrink then b:=awful_bad
else b:=badness(page_total-page_goal,page_shrink)

@ @<Append an insertion to the current page and |goto contribute|@>=
begin if page_contents=empty then freeze_page_specs(inserts_only);
n:=subtype(p); r:=page_ins_head;
while n>=subtype(link(r)) do r:=link(r);
n:=qo(n);
if subtype(r)<>qi(n) then
  @<Create a page insertion node with |subtype(r)=qi(n)|, and
    include the glue correction for box |n| in the
    current page state@>;
if type(r)=split_up then insert_penalties:=insert_penalties+float_cost(p)
else  begin last_ins_ptr(r):=p;
  delta:=page_goal-page_total-page_depth+page_shrink;
    {this much room is left if we shrink the maximum}
  if count(n)=1000 then h:=height(p)
  else h:=x_over_n(height(p),1000)*count(n); {this much room is needed}
  if ((h<=0)or(h<=delta))and(height(p)+height(r)<=dimen(n)) then
    begin page_goal:=page_goal-h; height(r):=height(r)+height(p);
    end
  else @<Find the best way to split the insertion, and change
    |type(r)| to |split_up|@>;
  end;
goto contribute;
end

@ We take note of the value of \.{\\skip} |n| and the height plus depth
of \.{\\box}~|n| only when the first \.{\\insert}~|n| node is
encountered for a new page. A user who changes the contents of \.{\\box}~|n|
after that first \.{\\insert}~|n| had better be either extremely careful
or extremely lucky, or both.

@<Create a page insertion node...@>=
begin q:=get_node(page_ins_node_size); link(q):=link(r); link(r):=q; r:=q;
subtype(r):=qi(n); type(r):=inserting; ensure_vbox(n);
if box(n)=null then height(r):=0
else height(r):=height(box(n))+depth(box(n));
best_ins_ptr(r):=null;@/
q:=skip(n);
if count(n)=1000 then h:=height(r)
else h:=x_over_n(height(r),1000)*count(n);
page_goal:=page_goal-h-width(q);@/
page_so_far[2+stretch_order(q)]:=@|page_so_far[2+stretch_order(q)]+stretch(q);@/
page_shrink:=page_shrink+shrink(q);
if (shrink_order(q)<>normal)and(shrink(q)<>0) then
  begin print_err("Infinite glue shrinkage inserted from "); print_esc("skip");
@.Infinite glue shrinkage...@>
  print_int(n);
  help3("The correction glue for page breaking with insertions")@/
    ("must have finite shrinkability. But you may proceed,")@/
    ("since the offensive shrinkability has been made finite.");
  error;
  end;
end

@ Here is the code that will split a long footnote between pages, in an
emergency. The current situation deserves to be recapitulated: Node |p|
is an insertion into box |n|; the insertion will not fit, in its entirety,
either because it would make the total contents of box |n| greater than
\.{\\dimen} |n|, or because it would make the incremental amount of growth
|h| greater than the available space |delta|, or both. (This amount |h| has
been weighted by the insertion scaling factor, i.e., by \.{\\count} |n|
over 1000.) Now we will choose the best way to break the vlist of the
insertion, using the same criteria as in the \.{\\vsplit} operation.

@<Find the best way to split the insertion...@>=
begin if count(n)<=0 then w:=max_dimen
else  begin w:=page_goal-page_total-page_depth;
  if count(n)<>1000 then w:=x_over_n(w,count(n))*1000;
  end;
if w>dimen(n)-height(r) then w:=dimen(n)-height(r);
q:=vert_break(ins_ptr(p),w,depth(p));
height(r):=height(r)+best_height_plus_depth;
@!stat if tracing_pages>0 then @<Display the insertion split cost@>;@+tats@;@/
if count(n)<>1000 then
  best_height_plus_depth:=x_over_n(best_height_plus_depth,1000)*count(n);
page_goal:=page_goal-best_height_plus_depth;
type(r):=split_up; broken_ptr(r):=q; broken_ins(r):=p;
if q=null then insert_penalties:=insert_penalties+eject_penalty
else if type(q)=penalty_node then insert_penalties:=insert_penalties+penalty(q);
end

@ @<Display the insertion split cost@>=
begin begin_diagnostic; print_nl("% split"); print_int(n);
@.split@>
print(" to "); print_scaled(w);
print_char(","); print_scaled(best_height_plus_depth);@/
print(" p=");
if q=null then print_int(eject_penalty)
else if type(q)=penalty_node then print_int(penalty(q))
else print_char("0");
end_diagnostic(false);
end

@ When the page builder has looked at as much material as could appear before
the next page break, it makes its decision. The break that gave minimum
badness will be used to put a completed ``page'' into box 255, with insertions
appended to their other boxes.

We also set the values of |top_mark|, |first_mark|, and |bot_mark|. The
program uses the fact that |bot_mark<>null| implies |first_mark<>null|;
it also knows that |bot_mark=null| implies |top_mark=first_mark=null|.

The |fire_up| subroutine prepares to output the current page at the best
place; then it fires up the user's output routine, if there is one,
or it simply ships out the page. There is one parameter, |c|, which represents
the node that was being contributed to the page when the decision to
force an output was made.

@<Declare the procedure called |fire_up|@>=
procedure fire_up(@!c:pointer);
label exit;
var p,@!q,@!r,@!s:pointer; {nodes being examined and/or changed}
@!prev_p:pointer; {predecessor of |p|}
@!n:min_quarterword..255; {insertion box number}
@!wait:boolean; {should the present insertion be held over?}
@!save_vbadness:integer; {saved value of |vbadness|}
@!save_vfuzz: scaled; {saved value of |vfuzz|}
@!save_split_top_skip: pointer; {saved value of |split_top_skip|}
begin @<Set the value of |output_penalty|@>;
if bot_mark<>null then
  begin if top_mark<>null then delete_token_ref(top_mark);
  top_mark:=bot_mark; add_token_ref(top_mark);
  delete_token_ref(first_mark); first_mark:=null;
  end;
@<Put the \(o)optimal current page into box 255, update |first_mark| and
  |bot_mark|, append insertions to their boxes, and put the
  remaining nodes back on the contribution list@>;
if (top_mark<>null)and(first_mark=null) then
  begin first_mark:=top_mark; add_token_ref(top_mark);
  end;
if output_routine<>null then
  if dead_cycles>=max_dead_cycles then
    @<Explain that too many dead cycles have occurred in a row@>
  else @<Fire up the user's output routine and |return|@>;
@<Perform the default output routine@>;
exit:end;

@ @<Set the value of |output_penalty|@>=
if type(best_page_break)=penalty_node then
  begin geq_word_define(int_base+output_penalty_code,penalty(best_page_break));
  penalty(best_page_break):=inf_penalty;
  end
else geq_word_define(int_base+output_penalty_code,inf_penalty)

@ As the page is finally being prepared for output,
pointer |p| runs through the vlist, with |prev_p| trailing behind;
pointer |q| is the tail of a list of insertions that
are being held over for a subsequent page.

@<Put the \(o)optimal current page into box 255...@>=
if c=best_page_break then best_page_break:=null; {|c| not yet linked in}
@<Ensure that box 255 is empty before output@>;
insert_penalties:=0; {this will count the number of insertions held over}
save_split_top_skip:=split_top_skip;
if holding_inserts<=0 then
  @<Prepare all the boxes involved in insertions to act as queues@>;
q:=hold_head; link(q):=null; prev_p:=page_head; p:=link(prev_p);
while p<>best_page_break do
  begin if type(p)=ins_node then
    begin if holding_inserts<=0 then
       @<Either insert the material specified by node |p| into the
         appropriate box, or hold it for the next page;
         also delete node |p| from the current page@>;
    end
  else if type(p)=mark_node then @<Update the values of
    |first_mark| and |bot_mark|@>;
  prev_p:=p; p:=link(prev_p);
  end;
split_top_skip:=save_split_top_skip;
@<Break the current page at node |p|, put it in box~255,
  and put the remaining nodes on the contribution list@>;
@<Delete \(t)the page-insertion nodes@>

@ @<Ensure that box 255 is empty before output@>=
if box(255)<>null then
  begin print_err(""); print_esc("box"); print("255 is not void");
@:box255}{\.{\\box255 is not void}@>
  help2("You shouldn't use \box255 except in \output routines.")@/
    ("Proceed, and I'll discard its present contents.");
  box_error(255);
  end

@ @<Update the values of |first_mark| and |bot_mark|@>=
begin if first_mark=null then
  begin first_mark:=mark_ptr(p);
  add_token_ref(first_mark);
  end;
if bot_mark<>null then delete_token_ref(bot_mark);
bot_mark:=mark_ptr(p); add_token_ref(bot_mark);
end

@ When the following code is executed, the current page runs from node
|link(page_head)| to node |prev_p|, and the nodes from |p| to |page_tail|
are to be placed back at the front of the contribution list. Furthermore
the heldover insertions appear in a list from |link(hold_head)| to |q|; we
will put them into the current page list for safekeeping while the user's
output routine is active.  We might have |q=hold_head|; and |p=null| if
and only if |prev_p=page_tail|. Error messages are suppressed within
|vpackage|, since the box might appear to be overfull or underfull simply
because the stretch and shrink from the \.{\\skip} registers for inserts
are not actually present in the box.

@<Break the current page at node |p|, put it...@>=
if p<>null then
  begin if link(contrib_head)=null then
    if nest_ptr=0 then tail:=page_tail
    else contrib_tail:=page_tail;
  link(page_tail):=link(contrib_head);
  link(contrib_head):=p;
  link(prev_p):=null;
  end;
save_vbadness:=vbadness; vbadness:=inf_bad;
save_vfuzz:=vfuzz; vfuzz:=max_dimen; {inhibit error messages}
box(255):=vpackage(link(page_head),best_size,exactly,page_max_depth);
vbadness:=save_vbadness; vfuzz:=save_vfuzz;
if last_glue<>max_halfword then delete_glue_ref(last_glue);
@<Start a new current page@>; {this sets |last_glue:=max_halfword|}
if q<>hold_head then
  begin link(page_head):=link(hold_head); page_tail:=q;
  end

@ If many insertions are supposed to go into the same box, we want to know
the position of the last node in that box, so that we don't need to waste time
when linking further information into it. The |last_ins_ptr| fields of the
page insertion nodes are therefore used for this purpose during the
packaging phase.

@<Prepare all the boxes involved in insertions to act as queues@>=
begin r:=link(page_ins_head);
while r<>page_ins_head do
  begin if best_ins_ptr(r)<>null then
    begin n:=qo(subtype(r)); ensure_vbox(n);
    if box(n)=null then box(n):=new_null_box;
    p:=box(n)+list_offset;
    while link(p)<>null do p:=link(p);
    last_ins_ptr(r):=p;
    end;
  r:=link(r);
  end;
end

@ @<Delete \(t)the page-insertion nodes@>=
r:=link(page_ins_head);
while r<>page_ins_head do
  begin q:=link(r); free_node(r,page_ins_node_size); r:=q;
  end;
link(page_ins_head):=page_ins_head

@ We will set |best_ins_ptr:=null| and package the box corresponding to
insertion node~|r|, just after making the final insertion into that box.
If this final insertion is `|split_up|', the remainder after splitting
and pruning (if any) will be carried over to the next page.

@<Either insert the material specified by node |p| into...@>=
begin r:=link(page_ins_head);
while subtype(r)<>subtype(p) do r:=link(r);
if best_ins_ptr(r)=null then wait:=true
else  begin wait:=false; s:=last_ins_ptr(r); link(s):=ins_ptr(p);
  if best_ins_ptr(r)=p then
    @<Wrap up the box specified by node |r|, splitting node |p| if
    called for; set |wait:=true| if node |p| holds a remainder after
    splitting@>
  else  begin while link(s)<>null do s:=link(s);
    last_ins_ptr(r):=s;
    end;
  end;
@<Either append the insertion node |p| after node |q|, and remove it
  from the current page, or delete |node(p)|@>;
end

@ @<Wrap up the box specified by node |r|, splitting node |p| if...@>=
begin if type(r)=split_up then
  if (broken_ins(r)=p)and(broken_ptr(r)<>null) then
    begin while link(s)<>broken_ptr(r) do s:=link(s);
    link(s):=null;
    split_top_skip:=split_top_ptr(p);
    ins_ptr(p):=prune_page_top(broken_ptr(r));
    if ins_ptr(p)<>null then
      begin temp_ptr:=vpack(ins_ptr(p),natural);
      height(p):=height(temp_ptr)+depth(temp_ptr);
      free_node(temp_ptr,box_node_size); wait:=true;
      end;
    end;
best_ins_ptr(r):=null;
n:=qo(subtype(r));
temp_ptr:=list_ptr(box(n));
free_node(box(n),box_node_size);
box(n):=vpack(temp_ptr,natural);
end

@ @<Either append the insertion node |p|...@>=
link(prev_p):=link(p); link(p):=null;
if wait then
  begin link(q):=p; q:=p; incr(insert_penalties);
  end
else  begin delete_glue_ref(split_top_ptr(p));
  free_node(p,ins_node_size);
  end;
p:=prev_p

@ The list of heldover insertions, running from |link(page_head)| to
|page_tail|, must be moved to the contribution list when the user has
specified no output routine.

@<Perform the default output routine@>=
begin if link(page_head)<>null then
  begin if link(contrib_head)=null then
    if nest_ptr=0 then tail:=page_tail@+else contrib_tail:=page_tail
  else link(page_tail):=link(contrib_head);
  link(contrib_head):=link(page_head);
  link(page_head):=null; page_tail:=page_head;
  end;
ship_out(box(255)); box(255):=null;
end

@ @<Explain that too many dead cycles have occurred in a row@>=
begin print_err("Output loop---"); print_int(dead_cycles);
@.Output loop...@>
print(" consecutive dead cycles");
help3("I've concluded that your \output is awry; it never does a")@/
("\shipout, so I'm shipping \box255 out myself. Next time")@/
("increase \maxdeadcycles if you want me to be more patient!"); error;
end

@ @<Fire up the user's output routine and |return|@>=
begin output_active:=true;
incr(dead_cycles);
push_nest; mode:=-vmode; prev_depth:=ignore_depth; mode_line:=-line;
begin_token_list(output_routine,output_text);
new_save_level(output_group); normal_paragraph;
scan_left_brace;
return;
end

@ When the user's output routine finishes, it has constructed a vlist
in internal vertical mode, and \TeX\ will do the following:

@<Resume the page builder after an output routine has come to an end@>=
begin if (loc<>null) or 
 ((token_type<>output_text)and(token_type<>backed_up)) then
  @<Recover from an unbalanced output routine@>;
end_token_list; {conserve stack space in case more outputs are triggered}
end_graf; unsave; output_active:=false; insert_penalties:=0;@/
@<Ensure that box 255 is empty after output@>;
if tail<>head then {current list goes after heldover insertions}
  begin link(page_tail):=link(head);
  page_tail:=tail;
  end;
if link(page_head)<>null then {and both go before heldover contributions}
  begin if link(contrib_head)=null then contrib_tail:=page_tail;
  link(page_tail):=link(contrib_head);
  link(contrib_head):=link(page_head);
  link(page_head):=null; page_tail:=page_head;
  end;
pop_nest; build_page;
end

@ @<Recover from an unbalanced output routine@>=
begin print_err("Unbalanced output routine");
@.Unbalanced output routine@>
help2("Your sneaky output routine has problematic {'s and/or }'s.")@/
("I can't handle that very well; good luck."); error;
repeat get_token;
until loc=null;
end {loops forever if reading from a file, since |null=min_halfword<=0|}

@ @<Ensure that box 255 is empty after output@>=
if box(255)<>null then
  begin print_err("Output routine didn't use all of ");
  print_esc("box"); print_int(255);
@.Output routine didn't use...@>
  help3("Your \output commands should empty \box255,")@/
    ("e.g., by saying `\shipout\box255'.")@/
    ("Proceed; I'll discard its present contents.");
  box_error(255);
  end

@* \[46] The chief executive.
We come now to the |main_control| routine, which contains the master
switch that causes all the various pieces of \TeX\ to do their things,
in the right order.

In a sense, this is the grand climax of the program: It applies all the
tools that we have worked so hard to construct. In another sense, this is
the messiest part of the program: It necessarily refers to other pieces
of code all over the place, so that a person can't fully understand what is
going on without paging back and forth to be reminded of conventions that
are defined elsewhere. We are now at the hub of the web, the central nervous
system that touches most of the other parts and ties them together.
@^brain@>

The structure of |main_control| itself is quite simple. There's a label
called |big_switch|, at which point the next token of input is fetched
using |get_x_token|. Then the program branches at high speed into one of
about 100 possible directions, based on the value of the current
mode and the newly fetched command code; the sum |abs(mode)+cur_cmd|
indicates what to do next. For example, the case `|vmode+letter|' arises
when a letter occurs in vertical mode (or internal vertical mode); this
case leads to instructions that initialize a new paragraph and enter
horizontal mode.

The big |case| statement that contains this multiway switch has been labeled
|reswitch|, so that the program can |goto reswitch| when the next token
has already been fetched. Most of the cases are quite short; they call
an ``action procedure'' that does the work for that case, and then they
either |goto reswitch| or they ``fall through'' to the end of the |case|
statement, which returns control back to |big_switch|. Thus, |main_control|
is not an extremely large procedure, in spite of the multiplicity of things
it must do; it is small enough to be handled by \PASCAL\ compilers that put
severe restrictions on procedure size.
@!@^action procedure@>

One case is singled out for special treatment, because it accounts for most
of \TeX's activities in typical applications. The process of reading simple
text and converting it into |char_node| records, while looking for ligatures
and kerns, is part of \TeX's ``inner loop''; the whole program runs
efficiently when its inner loop is fast, so this part has been written
with particular care.

@ We shall concentrate first on the inner loop of |main_control|, deferring
consideration of the other cases until later.
@^inner loop@>

@d big_switch=60 {go here to branch on the next token of input}
@d main_loop=70 {go here to typeset a string of consecutive characters}
@d main_loop_wrapup=80 {go here to finish a character or ligature}
@d main_loop_move=90 {go here to advance the ligature cursor}
@d main_loop_move_lig=95 {same, when advancing past a generated ligature}
@d main_loop_lookahead=100 {go here to bring in another character, if any}
@d main_lig_loop=110 {go here to check for ligatures or kerning}
@d append_normal_space=120 {go here to append a normal space between words}

@p @t\4@>@<Declare action procedures for use by |main_control|@>@;
@t\4@>@<Declare the procedure called |handle_right_brace|@>@;
procedure main_control; {governs \TeX's activities}
label big_switch,reswitch,main_loop,main_loop_wrapup,
  main_loop_move,main_loop_move+1,main_loop_move+2,main_loop_move_lig,
  main_loop_lookahead,main_loop_lookahead+1,
  main_lig_loop,main_lig_loop+1,main_lig_loop+2,
  append_normal_space,exit;
var@!t:integer; {general-purpose temporary variable}
begin if every_job<>null then begin_token_list(every_job,every_job_text);
big_switch: get_x_token;@/
reswitch: @<Give diagnostic information, if requested@>;
case abs(mode)+cur_cmd of
hmode+letter,hmode+other_char,hmode+char_given: goto main_loop;
hmode+char_num: begin scan_char_num; cur_chr:=cur_val; goto main_loop;@+end;
hmode+no_boundary: begin get_x_token;
  if (cur_cmd=letter)or(cur_cmd=other_char)or(cur_cmd=char_given)or
   (cur_cmd=char_num) then cancel_boundary:=true;
  goto reswitch;
  end;
hmode+spacer: if space_factor=1000 then goto append_normal_space
  else app_space;
hmode+ex_space,mmode+ex_space: goto append_normal_space;
@t\4@>@<Cases of |main_control| that are not part of the inner loop@>@;
end; {of the big |case| statement}
goto big_switch;
main_loop:@<Append character |cur_chr| and the following characters (if~any)
  to the current hlist in the current font; |goto reswitch| when
  a non-character has been fetched@>;
append_normal_space:@<Append a normal inter-word space to the current list,
  then |goto big_switch|@>;
exit:end;

@ When a new token has just been fetched at |big_switch|, we have an
ideal place to monitor \TeX's activity.
@^debugging@>

@<Give diagnostic information, if requested@>=
if interrupt<>0 then if OK_to_interrupt then
  begin back_input; check_interrupt; goto big_switch;
  end;
@!debug if panicking then check_mem(false);@+@;@+gubed
if tracing_commands>0 then show_cur_cmd_chr

@ The following part of the program was first written in a structured
manner, according to the philosophy that ``premature optimization is
the root of all evil.'' Then it was rearranged into pieces of
spaghetti so that the most common actions could proceed with little or
no redundancy.

The original unoptimized form of this algorithm resembles the
|reconstitute| procedure, which was described earlier in connection with
hyphenation. Again we have an implied ``cursor'' between characters
|cur_l| and |cur_r|. The main difference is that the |lig_stack| can now
contain a charnode as well as pseudo-ligatures; that stack is now
usually nonempty, because the next character of input (if any) has been
appended to it. In |main_control| we have
$$|cur_r|=\cases{|character(lig_stack)|,&if |lig_stack>null|;\cr
  |font_bchar[cur_font]|,&otherwise;\cr}$$
except when |character(lig_stack)=font_false_bchar[cur_font]|.
Several additional global variables are needed.

@<Glob...@>=
@!main_f:internal_font_number; {the current font}
@!main_i:four_quarters; {character information bytes for |cur_l|}
@!main_j:four_quarters; {ligature/kern command}
@!main_k:font_index; {index into |font_info|}
@!main_p:pointer; {temporary register for list manipulation}
@!main_s:integer; {space factor value}
@!bchar:halfword; {right boundary character of current font, or |non_char|}
@!false_bchar:halfword; {nonexistent character matching |bchar|, or |non_char|}
@!cancel_boundary:boolean; {should the left boundary be ignored?}
@!ins_disc:boolean; {should we insert a discretionary node?}

@ The boolean variables of the main loop are normally false, and always reset
to false before the loop is left. That saves us the extra work of initializing
each time.

@<Set init...@>=
ligature_present:=false; cancel_boundary:=false; lft_hit:=false; rt_hit:=false;
ins_disc:=false;

@ We leave the |space_factor| unchanged if |sf_code(cur_chr)=0|; otherwise we
set it equal to |sf_code(cur_chr)|, except that it should never change
from a value less than 1000 to a value exceeding 1000. The most common
case is |sf_code(cur_chr)=1000|, so we want that case to be fast.

The overall structure of the main loop is presented here. Some program labels
are inside the individual sections.

@d adjust_space_factor==@t@>@;@/
  main_s:=sf_code(cur_chr);
  if main_s=1000 then space_factor:=1000
  else if main_s<1000 then
    begin if main_s>0 then space_factor:=main_s;
    end
  else if space_factor<1000 then space_factor:=1000
  else space_factor:=main_s

@<Append character |cur_chr|...@>=
adjust_space_factor;@/
main_f:=cur_font;
bchar:=font_bchar[main_f]; false_bchar:=font_false_bchar[main_f];
if mode>0 then if language<>clang then fix_language;
fast_get_avail(lig_stack); font(lig_stack):=main_f; cur_l:=qi(cur_chr);
character(lig_stack):=cur_l;@/
cur_q:=tail;
if cancel_boundary then
  begin cancel_boundary:=false; main_k:=non_address;
  end
else main_k:=bchar_label[main_f];
if main_k=non_address then goto main_loop_move+2; {no left boundary processing}
cur_r:=cur_l; cur_l:=non_char;
goto main_lig_loop+1; {begin with cursor after left boundary}
@#
main_loop_wrapup:@<Make a ligature node, if |ligature_present|;
  insert a null discretionary, if appropriate@>;
main_loop_move:@<If the cursor is immediately followed by the right boundary,
  |goto reswitch|; if it's followed by an invalid character, |goto big_switch|;
  otherwise move the cursor one step to the right and |goto main_lig_loop|@>;
main_loop_lookahead:@<Look ahead for another character, or leave |lig_stack|
  empty if there's none there@>;
main_lig_loop:@<If there's a ligature/kern command relevant to |cur_l| and
  |cur_r|, adjust the text appropriately; exit to |main_loop_wrapup|@>;
main_loop_move_lig:@<Move the cursor past a pseudo-ligature, then
  |goto main_loop_lookahead| or |main_lig_loop|@>

@ If the current horizontal list is empty, the reference to |character(tail)|
here is not strictly legal, since |tail| will be a node freshly returned by
|get_avail|. But this should cause no problem on most implementations, and we
do want the inner loop to be fast.
@^dirty \PASCAL@>

A discretionary break is not inserted for an explicit hyphen when we are in
restricted horizontal mode. In particular, this avoids putting discretionary
nodes inside of other discretionaries.

@d pack_lig(#)== {the parameter is either |rt_hit| or |false|}
  begin main_p:=new_ligature(main_f,cur_l,link(cur_q));
  if lft_hit then
    begin subtype(main_p):=2; lft_hit:=false;
    end;
  if # then if lig_stack=null then
    begin incr(subtype(main_p)); rt_hit:=false;
    end;
  link(cur_q):=main_p; tail:=main_p; ligature_present:=false;
  end

@d wrapup(#)==if cur_l<non_char then
  begin if character(tail)=qi(hyphen_char[main_f]) then if link(cur_q)>null then
    ins_disc:=true;
  if ligature_present then pack_lig(#);
  if ins_disc then
    begin ins_disc:=false;
    if mode>0 then tail_append(new_disc);
    end;
  end

@<Make a ligature node, if |ligature_present|;...@>=
wrapup(rt_hit)

@ @<If the cursor is immediately followed by the right boundary...@>=
if lig_stack=null then goto reswitch;
cur_q:=tail; cur_l:=character(lig_stack);
main_loop_move+1:if not is_char_node(lig_stack) then goto main_loop_move_lig;
main_loop_move+2:if(cur_chr<font_bc[main_f])or(cur_chr>font_ec[main_f]) then
  begin char_warning(main_f,cur_chr); free_avail(lig_stack); goto big_switch;
  end;
main_i:=char_info(main_f)(cur_l);
if not char_exists(main_i) then
  begin char_warning(main_f,cur_chr); free_avail(lig_stack); goto big_switch;
  end;
tail_append(lig_stack) {|main_loop_lookahead| is next}

@ Here we are at |main_loop_move_lig|.
When we begin this code we have |cur_q=tail| and |cur_l=character(lig_stack)|.

@<Move the cursor past a pseudo-ligature...@>=
main_p:=lig_ptr(lig_stack);
if main_p>null then tail_append(main_p);
temp_ptr:=lig_stack; lig_stack:=link(temp_ptr);
free_node(temp_ptr,small_node_size);
main_i:=char_info(main_f)(cur_l); ligature_present:=true;
if lig_stack=null then
  if main_p>null then goto main_loop_lookahead
  else cur_r:=bchar
else cur_r:=character(lig_stack);
goto main_lig_loop

@ The result of \.{\\char} can participate in a ligature or kern, so we must
look ahead for it.

@<Look ahead for another character...@>=
get_next; {set only |cur_cmd| and |cur_chr|, for speed}
if cur_cmd=letter then goto main_loop_lookahead+1;
if cur_cmd=other_char then goto main_loop_lookahead+1;
if cur_cmd=char_given then goto main_loop_lookahead+1;
x_token; {now expand and set |cur_cmd|, |cur_chr|, |cur_tok|}
if cur_cmd=letter then goto main_loop_lookahead+1;
if cur_cmd=other_char then goto main_loop_lookahead+1;
if cur_cmd=char_given then goto main_loop_lookahead+1;
if cur_cmd=char_num then
  begin scan_char_num; cur_chr:=cur_val; goto main_loop_lookahead+1;
  end;
if cur_cmd=no_boundary then bchar:=non_char;
cur_r:=bchar; lig_stack:=null; goto main_lig_loop;
main_loop_lookahead+1: adjust_space_factor;
fast_get_avail(lig_stack); font(lig_stack):=main_f;
cur_r:=qi(cur_chr); character(lig_stack):=cur_r;
if cur_r=false_bchar then cur_r:=non_char {this prevents spurious ligatures}

@ Even though comparatively few characters have a lig/kern program, several
of the instructions here count as part of \TeX's inner loop, since a
@^inner loop@>
potentially long sequential search must be performed. For example, tests with
Computer Modern Roman showed that about 40 per cent of all characters
actually encountered in practice had a lig/kern program, and that about four
lig/kern commands were investigated for every such character.

At the beginning of this code we have |main_i=char_info(main_f)(cur_l)|.

@<If there's a ligature/kern command...@>=
if char_tag(main_i)<>lig_tag then goto main_loop_wrapup;
main_k:=lig_kern_start(main_f)(main_i); main_j:=font_info[main_k].qqqq;
if skip_byte(main_j)<=stop_flag then goto main_lig_loop+2;
main_k:=lig_kern_restart(main_f)(main_j);
main_lig_loop+1:main_j:=font_info[main_k].qqqq;
main_lig_loop+2:if next_char(main_j)=cur_r then
 if skip_byte(main_j)<=stop_flag then
  @<Do ligature or kern command, returning to |main_lig_loop|
  or |main_loop_wrapup| or |main_loop_move|@>;
if skip_byte(main_j)=qi(0) then incr(main_k)
else begin if skip_byte(main_j)>=stop_flag then goto main_loop_wrapup;
  main_k:=main_k+qo(skip_byte(main_j))+1;
  end;
goto main_lig_loop+1

@ When a ligature or kern instruction matches a character, we know from
|read_font_info| that the character exists in the font, even though we
haven't verified its existence in the normal way.

This section could be made into a subroutine, if the code inside
|main_control| needs to be shortened.

\chardef\?='174 % vertical line to indicate character retention

@<Do ligature or kern command...@>=
begin if op_byte(main_j)>=kern_flag then
  begin wrapup(rt_hit);
  tail_append(new_kern(char_kern(main_f)(main_j))); goto main_loop_move;
  end;
if cur_l=non_char then lft_hit:=true
else if lig_stack=null then rt_hit:=true;
check_interrupt; {allow a way out in case there's an infinite ligature loop}
case op_byte(main_j) of
qi(1),qi(5):begin cur_l:=rem_byte(main_j); {\.{=:\?}, \.{=:\?>}}
  main_i:=char_info(main_f)(cur_l); ligature_present:=true;
  end;
qi(2),qi(6):begin cur_r:=rem_byte(main_j); {\.{\?=:}, \.{\?=:>}}
  if lig_stack=null then {right boundary character is being consumed}
    begin lig_stack:=new_lig_item(cur_r); bchar:=non_char;
    end
  else if is_char_node(lig_stack) then {|link(lig_stack)=null|}
    begin main_p:=lig_stack; lig_stack:=new_lig_item(cur_r);
    lig_ptr(lig_stack):=main_p;
    end
  else character(lig_stack):=cur_r;
  end;
qi(3):begin cur_r:=rem_byte(main_j); {\.{\?=:\?}}
  main_p:=lig_stack; lig_stack:=new_lig_item(cur_r);
  link(lig_stack):=main_p;
  end;
qi(7),qi(11):begin wrapup(false); {\.{\?=:\?>}, \.{\?=:\?>>}}
  cur_q:=tail; cur_l:=rem_byte(main_j);
  main_i:=char_info(main_f)(cur_l); ligature_present:=true;
  end;
othercases begin cur_l:=rem_byte(main_j); ligature_present:=true; {\.{=:}}
  if lig_stack=null then goto main_loop_wrapup
  else goto main_loop_move+1;
  end
endcases;
if op_byte(main_j)>qi(4) then
  if op_byte(main_j)<>qi(7) then goto main_loop_wrapup;
if cur_l<non_char then goto main_lig_loop;
main_k:=bchar_label[main_f]; goto main_lig_loop+1;
end

@ The occurrence of blank spaces is almost part of \TeX's inner loop,
@^inner loop@>
since we usually encounter about one space for every five non-blank characters.
Therefore |main_control| gives second-highest priority to ordinary spaces.

When a glue parameter like \.{\\spaceskip} is set to `\.{0pt}', we will
see to it later that the corresponding glue specification is precisely
|zero_glue|, not merely a pointer to some specification that happens
to be full of zeroes. Therefore it is simple to test whether a glue parameter
is zero or~not.

@<Append a normal inter-word space...@>=
if space_skip=zero_glue then
  begin @<Find the glue specification, |main_p|, for
    text spaces in the current font@>;
  temp_ptr:=new_glue(main_p);
  end
else temp_ptr:=new_param_glue(space_skip_code);
link(tail):=temp_ptr; tail:=temp_ptr;
goto big_switch

@ Having |font_glue| allocated for each text font saves both time and memory.
If any of the three spacing parameters are subsequently changed by the
use of \.{\\fontdimen}, the |find_font_dimen| procedure deallocates the
|font_glue| specification allocated here.

@<Find the glue specification...@>=
begin main_p:=font_glue[cur_font];
if main_p=null then
  begin main_p:=new_spec(zero_glue); main_k:=param_base[cur_font]+space_code;
  width(main_p):=font_info[main_k].sc; {that's |space(cur_font)|}
  stretch(main_p):=font_info[main_k+1].sc; {and |space_stretch(cur_font)|}
  shrink(main_p):=font_info[main_k+2].sc; {and |space_shrink(cur_font)|}
  font_glue[cur_font]:=main_p;
  end;
end

@ @<Declare act...@>=
procedure app_space; {handle spaces when |space_factor<>1000|}
var@!q:pointer; {glue node}
begin if (space_factor>=2000)and(xspace_skip<>zero_glue) then
  q:=new_param_glue(xspace_skip_code)
else  begin if space_skip<>zero_glue then main_p:=space_skip
  else @<Find the glue specification...@>;
  main_p:=new_spec(main_p);
  @<Modify the glue specification in |main_p| according to the space factor@>;
  q:=new_glue(main_p); glue_ref_count(main_p):=null;
  end;
link(tail):=q; tail:=q;
end;

@ @<Modify the glue specification in |main_p| according to the space factor@>=
if space_factor>=2000 then width(main_p):=width(main_p)+extra_space(cur_font);
stretch(main_p):=xn_over_d(stretch(main_p),space_factor,1000);
shrink(main_p):=xn_over_d(shrink(main_p),1000,space_factor)

@ Whew---that covers the main loop. We can now proceed at a leisurely
pace through the other combinations of possibilities.

@d any_mode(#)==vmode+#,hmode+#,mmode+# {for mode-independent commands}

@<Cases of |main_control| that are not part of the inner loop@>=
any_mode(relax),vmode+spacer,mmode+spacer,mmode+no_boundary:do_nothing;
any_mode(ignore_spaces): begin @<Get the next non-blank non-call...@>;
  goto reswitch;
  end;
vmode+stop: if its_all_over then return; {this is the only way out}
@t\4@>@<Forbidden cases detected in |main_control|@>@+@,any_mode(mac_param):
  report_illegal_case;
@<Math-only cases in non-math modes, or vice versa@>: insert_dollar_sign;
@t\4@>@<Cases of |main_control| that build boxes and lists@>@;
@t\4@>@<Cases of |main_control| that don't depend on |mode|@>@;
@t\4@>@<Cases of |main_control| that are for extensions to \TeX@>@;

@ Here is a list of cases where the user has probably gotten into or out of math
mode by mistake. \TeX\ will insert a dollar sign and rescan the current token.

@d non_math(#)==vmode+#,hmode+#

@<Math-only cases in non-math modes...@>=
non_math(sup_mark), non_math(sub_mark), non_math(math_char_num),
non_math(math_given), non_math(math_comp), non_math(delim_num),
non_math(left_right), non_math(above), non_math(radical),
non_math(math_style), non_math(math_choice), non_math(vcenter),
non_math(non_script), non_math(mkern), non_math(limit_switch),
non_math(mskip), non_math(math_accent),
mmode+endv, mmode+par_end, mmode+stop, mmode+vskip, mmode+un_vbox,
mmode+valign, mmode+hrule

@ @<Declare action...@>=
procedure insert_dollar_sign;
begin back_input; cur_tok:=math_shift_token+"$";
print_err("Missing $ inserted");
@.Missing \$ inserted@>
help2("I've inserted a begin-math/end-math symbol since I think")@/
("you left one out. Proceed, with fingers crossed."); ins_error;
end;

@ When erroneous situations arise, \TeX\ usually issues an error message
specific to the particular error. For example, `\.{\\noalign}' should
not appear in any mode, since it is recognized by the |align_peek| routine
in all of its legitimate appearances; a special error message is given
when `\.{\\noalign}' occurs elsewhere. But sometimes the most appropriate
error message is simply that the user is not allowed to do what he or she
has attempted. For example, `\.{\\moveleft}' is allowed only in vertical mode,
and `\.{\\lower}' only in non-vertical modes.  Such cases are enumerated
here and in the other sections referred to under `See also \dots.'

@<Forbidden cases...@>=
vmode+vmove,hmode+hmove,mmode+hmove,any_mode(last_item),

@ The `|you_cant|' procedure prints a line saying that the current command
is illegal in the current mode; it identifies these things symbolically.

@<Declare action...@>=
procedure you_cant;
begin print_err("You can't use `");
@.You can't use x in y mode@>
print_cmd_chr(cur_cmd,cur_chr);
print("' in "); print_mode(mode);
end;

@ @<Declare act...@>=
procedure report_illegal_case;
begin you_cant;
help4("Sorry, but I'm not programmed to handle this case;")@/
("I'll just pretend that you didn't ask for it.")@/
("If you're in the wrong mode, you might be able to")@/
("return to the right one by typing `I}' or `I$' or `I\par'.");@/
error;
end;

@ Some operations are allowed only in privileged modes, i.e., in cases
that |mode>0|. The |privileged| function is used to detect violations
of this rule; it issues an error message and returns |false| if the
current |mode| is negative.

@<Declare act...@>=
function privileged:boolean;
begin if mode>0 then privileged:=true
else  begin report_illegal_case; privileged:=false;
  end;
end;

@ Either \.{\\dump} or \.{\\end} will cause |main_control| to enter the
endgame, since both of them have `|stop|' as their command code.

@<Put each...@>=
primitive("end",stop,0);@/
@!@:end_}{\.{\\end} primitive@>
primitive("dump",stop,1);@/
@!@:dump_}{\.{\\dump} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
stop:if chr_code=1 then print_esc("dump")@+else print_esc("end");

@ We don't want to leave |main_control| immediately when a |stop| command
is sensed, because it may be necessary to invoke an \.{\\output} routine
several times before things really grind to a halt. (The output routine
might even say `\.{\\gdef\\end\{...\}}', to prolong the life of the job.)
Therefore |its_all_over| is |true| only when the current page
and contribution list are empty, and when the last output was not a
``dead cycle.''

@<Declare act...@>=
function its_all_over:boolean; {do this when \.{\\end} or \.{\\dump} occurs}
label exit;
begin if privileged then
  begin if (page_head=page_tail)and(head=tail)and(dead_cycles=0) then
    begin its_all_over:=true; return;
    end;
  back_input; {we will try to end again after ejecting residual material}
  tail_append(new_null_box);
  width(tail):=hsize;
  tail_append(new_glue(fill_glue));
  tail_append(new_penalty(-@'10000000000));@/
  build_page; {append \.{\\hbox to \\hsize\{\}\\vfill\\penalty-'10000000000}}
  end;
its_all_over:=false;
exit:end;

@* \[47] Building boxes and lists.
The most important parts of |main_control| are concerned with \TeX's
chief mission of box-making. We need to control the activities that put
entries on vlists and hlists, as well as the activities that convert
those lists into boxes. All of the necessary machinery has already been
developed; it remains for us to ``push the buttons'' at the right times.

@ As an introduction to these routines, let's consider one of the simplest
cases: What happens when `\.{\\hrule}' occurs in vertical mode, or
`\.{\\vrule}' in horizontal mode or math mode? The code in |main_control|
is short, since the |scan_rule_spec| routine already does most of what is
required; thus, there is no need for a special action procedure.

Note that baselineskip calculations are disabled after a rule in vertical
mode, by setting |prev_depth:=ignore_depth|.

@<Cases of |main_control| that build...@>=
vmode+hrule,hmode+vrule,mmode+vrule: begin tail_append(scan_rule_spec);
  if abs(mode)=vmode then prev_depth:=ignore_depth
  else if abs(mode)=hmode then space_factor:=1000;
  end;

@ The processing of things like \.{\\hskip} and \.{\\vskip} is slightly
more complicated. But the code in |main_control| is very short, since
it simply calls on the action routine |append_glue|. Similarly, \.{\\kern}
activates |append_kern|.

@<Cases of |main_control| that build...@>=
vmode+vskip,hmode+hskip,mmode+hskip,mmode+mskip: append_glue;
any_mode(kern),mmode+mkern: append_kern;

@ The |hskip| and |vskip| command codes are used for control sequences
like \.{\\hss} and \.{\\vfil} as well as for \.{\\hskip} and \.{\\vskip}.
The difference is in the value of |cur_chr|.

@d fil_code=0 {identifies \.{\\hfil} and \.{\\vfil}}
@d fill_code=1 {identifies \.{\\hfill} and \.{\\vfill}}
@d ss_code=2 {identifies \.{\\hss} and \.{\\vss}}
@d fil_neg_code=3 {identifies \.{\\hfilneg} and \.{\\vfilneg}}
@d skip_code=4 {identifies \.{\\hskip} and \.{\\vskip}}
@d mskip_code=5 {identifies \.{\\mskip}}

@<Put each...@>=
primitive("hskip",hskip,skip_code);@/
@!@:hskip_}{\.{\\hskip} primitive@>
primitive("hfil",hskip,fil_code);
@!@:hfil_}{\.{\\hfil} primitive@>
primitive("hfill",hskip,fill_code);@/
@!@:hfill_}{\.{\\hfill} primitive@>
primitive("hss",hskip,ss_code);
@!@:hss_}{\.{\\hss} primitive@>
primitive("hfilneg",hskip,fil_neg_code);@/
@!@:hfil_neg_}{\.{\\hfilneg} primitive@>
primitive("vskip",vskip,skip_code);@/
@!@:vskip_}{\.{\\vskip} primitive@>
primitive("vfil",vskip,fil_code);
@!@:vfil_}{\.{\\vfil} primitive@>
primitive("vfill",vskip,fill_code);@/
@!@:vfill_}{\.{\\vfill} primitive@>
primitive("vss",vskip,ss_code);
@!@:vss_}{\.{\\vss} primitive@>
primitive("vfilneg",vskip,fil_neg_code);@/
@!@:vfil_neg_}{\.{\\vfilneg} primitive@>
primitive("mskip",mskip,mskip_code);@/
@!@:mskip_}{\.{\\mskip} primitive@>
primitive("kern",kern,explicit);
@!@:kern_}{\.{\\kern} primitive@>
primitive("mkern",mkern,mu_glue);@/
@!@:mkern_}{\.{\\mkern} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
hskip: case chr_code of
  skip_code:print_esc("hskip");
  fil_code:print_esc("hfil");
  fill_code:print_esc("hfill");
  ss_code:print_esc("hss");
  othercases print_esc("hfilneg")
  endcases;
vskip: case chr_code of
  skip_code:print_esc("vskip");
  fil_code:print_esc("vfil");
  fill_code:print_esc("vfill");
  ss_code:print_esc("vss");
  othercases print_esc("vfilneg")
  endcases;
mskip: print_esc("mskip");
kern: print_esc("kern");
mkern: print_esc("mkern");

@ All the work relating to glue creation has been relegated to the
following subroutine. It does not call |build_page|, because it is
used in at least one place where that would be a mistake.

@<Declare action...@>=
procedure append_glue;
var s:small_number; {modifier of skip command}
begin s:=cur_chr;
case s of
fil_code: cur_val:=fil_glue;
fill_code: cur_val:=fill_glue;
ss_code: cur_val:=ss_glue;
fil_neg_code: cur_val:=fil_neg_glue;
skip_code: scan_glue(glue_val);
mskip_code: scan_glue(mu_val);
end; {now |cur_val| points to the glue specification}
tail_append(new_glue(cur_val));
if s>=skip_code then
  begin decr(glue_ref_count(cur_val));
  if s>skip_code then subtype(tail):=mu_glue;
  end;
end;

@ @<Declare act...@>=
procedure append_kern;
var s:quarterword; {|subtype| of the kern node}
begin s:=cur_chr; scan_dimen(s=mu_glue,false,false);
tail_append(new_kern(cur_val)); subtype(tail):=s;
end;

@ Many of the actions related to box-making are triggered by the appearance
of braces in the input. For example, when the user says `\.{\\hbox}
\.{to} \.{100pt\{$\langle\,\hbox{hlist}\,\rangle$\}}' in vertical mode,
the information about the box size (100pt, |exactly|) is put onto |save_stack|
with a level boundary word just above it, and |cur_group:=adjusted_hbox_group|;
\TeX\ enters restricted horizontal mode to process the hlist. The right
brace eventually causes |save_stack| to be restored to its former state,
at which time the information about the box size (100pt, |exactly|) is
available once again; a box is packaged and we leave restricted horizontal
mode, appending the new box to the current list of the enclosing mode
(in this case to the current list of vertical mode), followed by any
vertical adjustments that were removed from the box by |hpack|.

The next few sections of the program are therefore concerned with the
treatment of left and right curly braces.

@ If a left brace occurs in the middle of a page or paragraph, it simply
introduces a new level of grouping, and the matching right brace will not have
such a drastic effect. Such grouping affects neither the mode nor the
current list.

@<Cases of |main_control| that build...@>=
non_math(left_brace): new_save_level(simple_group);
any_mode(begin_group): new_save_level(semi_simple_group);
any_mode(end_group): if cur_group=semi_simple_group then unsave
  else off_save;

@ We have to deal with errors in which braces and such things are not
properly nested. Sometimes the user makes an error of commission by
inserting an extra symbol, but sometimes the user makes an error of omission.
\TeX\ can't always tell one from the other, so it makes a guess and tries
to avoid getting into a loop.

The |off_save| routine is called when the current group code is wrong. It tries
to insert something into the user's input that will help clean off
the top level.

@<Declare act...@>=
procedure off_save;
var p:pointer; {inserted token}
begin if cur_group=bottom_level then
  @<Drop current token and complain that it was unmatched@>
else  begin back_input; p:=get_avail; link(temp_head):=p;
  print_err("Missing ");
  @<Prepare to insert a token that matches |cur_group|,
    and print what it is@>;
  print(" inserted"); ins_list(link(temp_head));
  help5("I've inserted something that you may have forgotten.")@/
  ("(See the <inserted text> above.)")@/
  ("With luck, this will get me unwedged. But if you")@/
  ("really didn't forget anything, try typing `2' now; then")@/
  ("my insertion and my current dilemma will both disappear.");
  error;
  end;
end;

@ At this point, |link(temp_head)=p|, a pointer to an empty one-word node.

@<Prepare to insert a token that matches |cur_group|...@>=
case cur_group of
semi_simple_group: begin info(p):=cs_token_flag+frozen_end_group;
  print_esc("endgroup");
@.Missing \\endgroup inserted@>
  end;
math_shift_group: begin info(p):=math_shift_token+"$"; print_char("$");
@.Missing \$ inserted@>
  end;
math_left_group: begin info(p):=cs_token_flag+frozen_right; link(p):=get_avail;
  p:=link(p); info(p):=other_token+"."; print_esc("right.");
@.Missing \\right\hbox{.} inserted@>
@^null delimiter@>
  end;
othercases begin info(p):=right_brace_token+"}"; print_char("}");
@.Missing \} inserted@>
  end
endcases

@ @<Drop current token and complain that it was unmatched@>=
begin print_err("Extra "); print_cmd_chr(cur_cmd,cur_chr);
@.Extra x@>
help1("Things are pretty mixed up, but I think the worst is over.");@/
error;
end

@ The routine for a |right_brace| character branches into many subcases,
since a variety of things may happen, depending on |cur_group|. Some
types of groups are not supposed to be ended by a right brace; error
messages are given in hopes of pinpointing the problem. Most branches
of this routine will be filled in later, when we are ready to understand
them; meanwhile, we must prepare ourselves to deal with such errors.

@<Cases of |main_control| that build...@>=
any_mode(right_brace): handle_right_brace;

@ @<Declare the procedure called |handle_right_brace|@>=
procedure handle_right_brace;
var p,@!q:pointer; {for short-term use}
@!d:scaled; {holds |split_max_depth| in |insert_group|}
@!f:integer; {holds |floating_penalty| in |insert_group|}
begin case cur_group of
simple_group: unsave;
bottom_level: begin print_err("Too many }'s");
@.Too many \}'s@>
  help2("You've closed more groups than you opened.")@/
  ("Such booboos are generally harmless, so keep going."); error;
  end;
semi_simple_group,math_shift_group,math_left_group: extra_right_brace;
@t\4@>@<Cases of |handle_right_brace| where a |right_brace| triggers
  a delayed action@>@;
othercases confusion("rightbrace")
@:this can't happen rightbrace}{\quad rightbrace@>
endcases;
end;

@ @<Declare act...@>=
procedure extra_right_brace;
begin print_err("Extra }, or forgotten ");
@.Extra \}, or forgotten x@>
case cur_group of
semi_simple_group: print_esc("endgroup");
math_shift_group: print_char("$");
math_left_group: print_esc("right");
end;@/
help5("I've deleted a group-closing symbol because it seems to be")@/
("spurious, as in `$x}$'. But perhaps the } is legitimate and")@/
("you forgot something else, as in `\hbox{$x}'. In such cases")@/
("the way to recover is to insert both the forgotten and the")@/
("deleted material, e.g., by typing `I$}'."); error;
incr(align_state);
end;

@ Here is where we clear the parameters that are supposed to revert to their
default values after every paragraph and when internal vertical mode is entered.

@<Declare act...@>=
procedure normal_paragraph;
begin if looseness<>0 then eq_word_define(int_base+looseness_code,0);
if hang_indent<>0 then eq_word_define(dimen_base+hang_indent_code,0);
if hang_after<>1 then eq_word_define(int_base+hang_after_code,1);
if par_shape_ptr<>null then eq_define(par_shape_loc,shape_ref,null);
end;

@ Now let's turn to the question of how \.{\\hbox} is treated. We actually
need to consider also a slightly larger context, since constructions like
`\.{\\setbox3=}\penalty0\.{\\hbox...}' and
`\.{\\leaders}\penalty0\.{\\hbox...}' and
`\.{\\lower3.8pt\\hbox...}'
are supposed to invoke quite
different actions after the box has been packaged. Conversely,
constructions like `\.{\\setbox3=}' can be followed by a variety of
different kinds of boxes, and we would like to encode such things in an
efficient way.

In other words, there are two problems: To represent the context of a box,
and to represent its type.

The first problem is solved by putting a ``context code'' on the |save_stack|,
just below the two entries that give the dimensions produced by |scan_spec|.
The context code is either a (signed) shift amount, or it is a large
integer |>=box_flag|, where |box_flag=@t$2^{30}$@>|. Codes |box_flag| through
|box_flag+255| represent `\.{\\setbox0}' through `\.{\\setbox255}';
codes |box_flag+256| through |box_flag+511| represent `\.{\\global\\setbox0}'
through `\.{\\global\\setbox255}';
code |box_flag+512| represents `\.{\\shipout}'; and codes |box_flag+513|
through |box_flag+515| represent `\.{\\leaders}', `\.{\\cleaders}',
and `\.{\\xleaders}'.

The second problem is solved by giving the command code |make_box| to all
control sequences that produce a box, and by using the following |chr_code|
values to distinguish between them: |box_code|, |copy_code|, |last_box_code|,
|vsplit_code|, |vtop_code|, |vtop_code+vmode|, and |vtop_code+hmode|,
where the latter two are used denote \.{\\vbox} and \.{\\hbox}, respectively.

@d box_flag==@'10000000000 {context code for `\.{\\setbox0}'}
@d ship_out_flag==box_flag+512 {context code for `\.{\\shipout}'}
@d leader_flag==box_flag+513 {context code for `\.{\\leaders}'}
@d box_code=0 {|chr_code| for `\.{\\box}'}
@d copy_code=1 {|chr_code| for `\.{\\copy}'}
@d last_box_code=2 {|chr_code| for `\.{\\lastbox}'}
@d vsplit_code=3 {|chr_code| for `\.{\\vsplit}'}
@d vtop_code=4 {|chr_code| for `\.{\\vtop}'}

@<Put each...@>=
primitive("moveleft",hmove,1);
@!@:move_left_}{\.{\\moveleft} primitive@>
primitive("moveright",hmove,0);@/
@!@:move_right_}{\.{\\moveright} primitive@>
primitive("raise",vmove,1);
@!@:raise_}{\.{\\raise} primitive@>
primitive("lower",vmove,0);
@!@:lower_}{\.{\\lower} primitive@>
@#
primitive("box",make_box,box_code);
@!@:box_}{\.{\\box} primitive@>
primitive("copy",make_box,copy_code);
@!@:copy_}{\.{\\copy} primitive@>
primitive("lastbox",make_box,last_box_code);
@!@:last_box_}{\.{\\lastbox} primitive@>
primitive("vsplit",make_box,vsplit_code);
@!@:vsplit_}{\.{\\vsplit} primitive@>
primitive("vtop",make_box,vtop_code);@/
@!@:vtop_}{\.{\\vtop} primitive@>
primitive("vbox",make_box,vtop_code+vmode);
@!@:vbox_}{\.{\\vbox} primitive@>
primitive("hbox",make_box,vtop_code+hmode);@/
@!@:hbox_}{\.{\\hbox} primitive@>
primitive("shipout",leader_ship,a_leaders-1); {|ship_out_flag=leader_flag-1|}
@!@:ship_out_}{\.{\\shipout} primitive@>
primitive("leaders",leader_ship,a_leaders);
@!@:leaders_}{\.{\\leaders} primitive@>
primitive("cleaders",leader_ship,c_leaders);
@!@:c_leaders_}{\.{\\cleaders} primitive@>
primitive("xleaders",leader_ship,x_leaders);
@!@:x_leaders_}{\.{\\xleaders} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
hmove: if chr_code=1 then print_esc("moveleft")@+else print_esc("moveright");
vmove: if chr_code=1 then print_esc("raise")@+else print_esc("lower");
make_box: case chr_code of
  box_code: print_esc("box");
  copy_code: print_esc("copy");
  last_box_code: print_esc("lastbox");
  vsplit_code: print_esc("vsplit");
  vtop_code: print_esc("vtop");
  vtop_code+vmode: print_esc("vbox");
  othercases print_esc("hbox")
  endcases;
leader_ship: if chr_code=a_leaders then print_esc("leaders")
  else if chr_code=c_leaders then print_esc("cleaders")
  else if chr_code=x_leaders then print_esc("xleaders")
  else print_esc("shipout");

@ Constructions that require a box are started by calling |scan_box| with
a specified context code. The |scan_box| routine verifies
that a |make_box| command comes next and then it calls |begin_box|.

@<Cases of |main_control| that build...@>=
vmode+hmove,hmode+vmove,mmode+vmove: begin t:=cur_chr;
  scan_normal_dimen;
  if t=0 then scan_box(cur_val)@+else scan_box(-cur_val);
  end;
any_mode(leader_ship): scan_box(leader_flag-a_leaders+cur_chr);
any_mode(make_box): begin_box(0);

@ The global variable |cur_box| will point to a newly-made box. If the box
is void, we will have |cur_box=null|. Otherwise we will have
|type(cur_box)=hlist_node| or |vlist_node| or |rule_node|; the |rule_node|
case can occur only with leaders.

@<Glob...@>=
@!cur_box:pointer; {box to be placed into its context}

@ The |box_end| procedure does the right thing with |cur_box|, if
|box_context| represents the context as explained above.

@<Declare act...@>=
procedure box_end(@!box_context:integer);
var p:pointer; {|ord_noad| for new box in math mode}
begin if box_context<box_flag then @<Append box |cur_box| to the current list,
    shifted by |box_context|@>
else if box_context<ship_out_flag then @<Store \(c)|cur_box| in a box register@>
else if cur_box<>null then
  if box_context>ship_out_flag then @<Append a new leader node that
      uses |cur_box|@>
  else ship_out(cur_box);
end;

@ The global variable |adjust_tail| will be non-null if and only if the
current box might include adjustments that should be appended to the
current vertical list.

@<Append box |cur_box| to the current...@>=
begin if cur_box<>null then
  begin shift_amount(cur_box):=box_context;
  if abs(mode)=vmode then
    begin append_to_vlist(cur_box);
    if adjust_tail<>null then
      begin if adjust_head<>adjust_tail then
        begin link(tail):=link(adjust_head); tail:=adjust_tail;
        end;
      adjust_tail:=null;
      end;
    if mode>0 then build_page;
    end
  else  begin if abs(mode)=hmode then space_factor:=1000
    else  begin p:=new_noad;
      math_type(nucleus(p)):=sub_box;
      info(nucleus(p)):=cur_box; cur_box:=p;
      end;
    link(tail):=cur_box; tail:=cur_box;
    end;
  end;
end

@ @<Store \(c)|cur_box| in a box register@>=
if box_context<box_flag+256 then
  eq_define(box_base-box_flag+box_context,box_ref,cur_box)
else geq_define(box_base-box_flag-256+box_context,box_ref,cur_box)

@ @<Append a new leader node ...@>=
begin @<Get the next non-blank non-relax...@>;
if ((cur_cmd=hskip)and(abs(mode)<>vmode))or@|
   ((cur_cmd=vskip)and(abs(mode)=vmode))or@|
   ((cur_cmd=mskip)and(abs(mode)=mmode)) then
  begin append_glue; subtype(tail):=box_context-(leader_flag-a_leaders);
  leader_ptr(tail):=cur_box;
  end
else  begin print_err("Leaders not followed by proper glue");
@.Leaders not followed by...@>
  help3("You should say `\leaders <box or rule><hskip or vskip>'.")@/
  ("I found the <box or rule>, but there's no suitable")@/
  ("<hskip or vskip>, so I'm ignoring these leaders."); back_error;
  flush_node_list(cur_box);
  end;
end

@ Now that we can see what eventually happens to boxes, we can consider
the first steps in their creation. The |begin_box| routine is called when
|box_context| is a context specification, |cur_chr| specifies the type of
box desired, and |cur_cmd=make_box|.

@<Declare act...@>=
procedure begin_box(@!box_context:integer);
label exit, done;
var @!p,@!q:pointer; {run through the current list}
@!m:quarterword; {the length of a replacement list}
@!k:halfword; {0 or |vmode| or |hmode|}
@!n:eight_bits; {a box number}
begin case cur_chr of
box_code: begin scan_eight_bit_int; cur_box:=box(cur_val);
  box(cur_val):=null; {the box becomes void, at the same level}
  end;
copy_code: begin scan_eight_bit_int; cur_box:=copy_node_list(box(cur_val));
  end;
last_box_code: @<If the current list ends with a box node, delete it from
  the list and make |cur_box| point to it; otherwise set |cur_box:=null|@>;
vsplit_code: @<Split off part of a vertical box, make |cur_box| point to it@>;
othercases @<Initiate the construction of an hbox or vbox, then |return|@>
endcases;@/
box_end(box_context); {in simple cases, we use the box immediately}
exit:end;

@ Note that the condition |not is_char_node(tail)| implies that |head<>tail|,
since |head| is a one-word node.

@<If the current list ends with a box node, delete it...@>=
begin cur_box:=null;
if abs(mode)=mmode then
  begin you_cant; help1("Sorry; this \lastbox will be void."); error;
  end
else if (mode=vmode)and(head=tail) then
  begin you_cant;
  help2("Sorry...I usually can't take things from the current page.")@/
    ("This \lastbox will therefore be void."); error;
  end
else  begin if not is_char_node(tail) then
    if (type(tail)=hlist_node)or(type(tail)=vlist_node) then
      @<Remove the last box, unless it's part of a discretionary@>;
  end;
end

@ @<Remove the last box...@>=
begin q:=head;
repeat p:=q;
if not is_char_node(q) then if type(q)=disc_node then
  begin for m:=1 to replace_count(q) do p:=link(p);
  if p=tail then goto done;
  end;
q:=link(p);
until q=tail;
cur_box:=tail; shift_amount(cur_box):=0;
tail:=p; link(p):=null;
done:end

@ Here we deal with things like `\.{\\vsplit 13 to 100pt}'.

@<Split off part of a vertical box, make |cur_box| point to it@>=
begin scan_eight_bit_int; n:=cur_val;
if not scan_keyword("to") then
@.to@>
  begin print_err("Missing `to' inserted");
@.Missing `to' inserted@>
  help2("I'm working on `\vsplit<box number> to <dimen>';")@/
  ("will look for the <dimen> next."); error;
  end;
scan_normal_dimen;
cur_box:=vsplit(n,cur_val);
end

@ Here is where we enter restricted horizontal mode or internal vertical
mode, in order to make a box.

@<Initiate the construction of an hbox or vbox, then |return|@>=
begin k:=cur_chr-vtop_code; saved(0):=box_context;
if k=hmode then
  if (box_context<box_flag)and(abs(mode)=vmode) then
    scan_spec(adjusted_hbox_group,true)
  else scan_spec(hbox_group,true)
else  begin if k=vmode then scan_spec(vbox_group,true)
  else  begin scan_spec(vtop_group,true); k:=vmode;
    end;
  normal_paragraph;
  end;
push_nest; mode:=-k;
if k=vmode then
  begin prev_depth:=ignore_depth;
  if every_vbox<>null then begin_token_list(every_vbox,every_vbox_text);
  end
else  begin space_factor:=1000;
  if every_hbox<>null then begin_token_list(every_hbox,every_hbox_text);
  end;
return;
end

@ @<Declare act...@>=
procedure scan_box(@!box_context:integer);
  {the next input should specify a box or perhaps a rule}
begin @<Get the next non-blank non-relax...@>;
if cur_cmd=make_box then begin_box(box_context)
else if (box_context>=leader_flag)and((cur_cmd=hrule)or(cur_cmd=vrule)) then
  begin cur_box:=scan_rule_spec; box_end(box_context);
  end
else  begin@t@>@;@/
  print_err("A <box> was supposed to be here");@/
@.A <box> was supposed to...@>
  help3("I was expecting to see \hbox or \vbox or \copy or \box or")@/
  ("something like that. So you might find something missing in")@/
  ("your output. But keep trying; you can fix this later."); back_error;
  end;
end;

@ When the right brace occurs at the end of an \.{\\hbox} or \.{\\vbox} or
\.{\\vtop} construction, the |package| routine comes into action. We might
also have to finish a paragraph that hasn't ended.

@<Cases of |handle...@>=
hbox_group: package(0);
adjusted_hbox_group: begin adjust_tail:=adjust_head; package(0);
  end;
vbox_group: begin end_graf; package(0);
  end;
vtop_group: begin end_graf; package(vtop_code);
  end;

@ @<Declare action...@>=
procedure package(@!c:small_number);
var h:scaled; {height of box}
@!p:pointer; {first node in a box}
@!d:scaled; {max depth}
begin d:=box_max_depth; unsave; save_ptr:=save_ptr-3;
if mode=-hmode then cur_box:=hpack(link(head),saved(2),saved(1))
else  begin cur_box:=vpackage(link(head),saved(2),saved(1),d);
  if c=vtop_code then @<Readjust the height and depth of |cur_box|,
    for \.{\\vtop}@>;
  end;
pop_nest; box_end(saved(0));
end;

@ The height of a `\.{\\vtop}' box is inherited from the first item on its list,
if that item is an |hlist_node|, |vlist_node|, or |rule_node|; otherwise
the \.{\\vtop} height is zero.


@<Readjust the height...@>=
begin h:=0; p:=list_ptr(cur_box);
if p<>null then if type(p)<=rule_node then h:=height(p);
depth(cur_box):=depth(cur_box)-h+height(cur_box); height(cur_box):=h;
end

@ A paragraph begins when horizontal-mode material occurs in vertical mode,
or when the paragraph is explicitly started by `\.{\\indent}' or
`\.{\\noindent}'.

@<Put each...@>=
primitive("indent",start_par,1);
@!@:indent_}{\.{\\indent} primitive@>
primitive("noindent",start_par,0);
@!@:no_indent_}{\.{\\noindent} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
start_par: if chr_code=0 then print_esc("noindent")@+ else print_esc("indent");

@ @<Cases of |main_control| that build...@>=
vmode+start_par: new_graf(cur_chr>0);
vmode+letter,vmode+other_char,vmode+char_num,vmode+char_given,
   vmode+math_shift,vmode+un_hbox,vmode+vrule,
   vmode+accent,vmode+discretionary,vmode+hskip,vmode+valign,
   vmode+ex_space,vmode+no_boundary:@t@>@;@/
  begin back_input; new_graf(true);
  end;

@ @<Declare act...@>=
function norm_min(@!h:integer):small_number;
begin if h<=0 then norm_min:=1@+else if h>=63 then norm_min:=63@+
else norm_min:=h;
end;
@#
procedure new_graf(@!indented:boolean);
begin prev_graf:=0;
if (mode=vmode)or(head<>tail) then
  tail_append(new_param_glue(par_skip_code));
push_nest; mode:=hmode; space_factor:=1000; set_cur_lang; clang:=cur_lang;
prev_graf:=(norm_min(left_hyphen_min)*@'100+norm_min(right_hyphen_min))
             *@'200000+cur_lang;
if indented then
  begin tail:=new_null_box; link(head):=tail; width(tail):=par_indent;@+
  end;
if every_par<>null then begin_token_list(every_par,every_par_text);
if nest_ptr=1 then build_page; {put |par_skip| glue on current page}
end;

@ @<Cases of |main_control| that build...@>=
hmode+start_par,mmode+start_par: indent_in_hmode;

@ @<Declare act...@>=
procedure indent_in_hmode;
var p,@!q:pointer;
begin if cur_chr>0 then {\.{\\indent}}
  begin p:=new_null_box; width(p):=par_indent;
  if abs(mode)=hmode then space_factor:=1000
  else  begin q:=new_noad; math_type(nucleus(q)):=sub_box;
    info(nucleus(q)):=p; p:=q;
    end;
  tail_append(p);
  end;
end;

@ A paragraph ends when a |par_end| command is sensed, or when we are in
horizontal mode when reaching the right brace of vertical-mode routines
like \.{\\vbox}, \.{\\insert}, or \.{\\output}.

@<Cases of |main_control| that build...@>=
vmode+par_end: begin normal_paragraph;
  if mode>0 then build_page;
  end;
hmode+par_end: begin if align_state<0 then off_save; {this tries to
    recover from an alignment that didn't end properly}
  end_graf; {this takes us to the enclosing mode, if |mode>0|}
  if mode=vmode then build_page;
  end;
hmode+stop,hmode+vskip,hmode+hrule,hmode+un_vbox,hmode+halign: head_for_vmode;

@ @<Declare act...@>=
procedure head_for_vmode;
begin if mode<0 then
  if cur_cmd<>hrule then off_save
  else  begin print_err("You can't use `");
    print_esc("hrule"); print("' here except with leaders");
@.You can't use \\hrule...@>
    help2("To put a horizontal rule in an hbox or an alignment,")@/
      ("you should use \leaders or \hrulefill (see The TeXbook).");
    error;
    end
else  begin back_input; cur_tok:=par_token; back_input; token_type:=inserted;
  end;
end;

@ @<Declare act...@>=
procedure end_graf;
begin if mode=hmode then
  begin if head=tail then pop_nest {null paragraphs are ignored}
  else line_break(widow_penalty);
  normal_paragraph;
  error_count:=0;
  end;
end;

@ Insertion and adjustment and mark nodes are constructed by the following
pieces of the program.

@<Cases of |main_control| that build...@>=
any_mode(insert),hmode+vadjust,mmode+vadjust: begin_insert_or_adjust;
any_mode(mark): make_mark;

@ @<Forbidden...@>=
vmode+vadjust,

@ @<Declare act...@>=
procedure begin_insert_or_adjust;
begin if cur_cmd=vadjust then cur_val:=255
else  begin scan_eight_bit_int;
  if cur_val=255 then
    begin print_err("You can't "); print_esc("insert"); print_int(255);
@.You can't \\insert255@>
    help1("I'm changing to \insert0; box 255 is special.");
    error; cur_val:=0;
    end;
  end;
saved(0):=cur_val; incr(save_ptr);
new_save_level(insert_group); scan_left_brace; normal_paragraph;
push_nest; mode:=-vmode; prev_depth:=ignore_depth;
end;

@ @<Cases of |handle...@>=
insert_group: begin end_graf; q:=split_top_skip; add_glue_ref(q);
  d:=split_max_depth; f:=floating_penalty; unsave; decr(save_ptr);
  {now |saved(0)| is the insertion number, or 255 for |vadjust|}
  p:=vpack(link(head),natural); pop_nest;
  if saved(0)<255 then
    begin tail_append(get_node(ins_node_size));
    type(tail):=ins_node; subtype(tail):=qi(saved(0));
    height(tail):=height(p)+depth(p); ins_ptr(tail):=list_ptr(p);
    split_top_ptr(tail):=q; depth(tail):=d; float_cost(tail):=f;
    end
  else  begin tail_append(get_node(small_node_size));
    type(tail):=adjust_node;@/
    subtype(tail):=0; {the |subtype| is not used}
    adjust_ptr(tail):=list_ptr(p); delete_glue_ref(q);
    end;
  free_node(p,box_node_size);
  if nest_ptr=0 then build_page;
  end;
output_group: @<Resume the page builder...@>;

@ @<Declare act...@>=
procedure make_mark;
var p:pointer; {new node}
begin p:=scan_toks(false,true); p:=get_node(small_node_size);
type(p):=mark_node; subtype(p):=0; {the |subtype| is not used}
mark_ptr(p):=def_ref; link(tail):=p; tail:=p;
end;

@ Penalty nodes get into a list via the |break_penalty| command.
@^penalties@>

@<Cases of |main_control| that build...@>=
any_mode(break_penalty): append_penalty;

@ @<Declare action...@>=
procedure append_penalty;
begin scan_int; tail_append(new_penalty(cur_val));
if mode=vmode then build_page;
end;

@ The |remove_item| command removes a penalty, kern, or glue node if it
appears at the tail of the current list, using a brute-force linear scan.
Like \.{\\lastbox}, this command is not allowed in vertical mode (except
internal vertical mode), since the current list in vertical mode is sent
to the page builder.  But if we happen to be able to implement it in
vertical mode, we do.

@<Cases of |main_control| that build...@>=
any_mode(remove_item): delete_last;

@ When |delete_last| is called, |cur_chr| is the |type| of node that
will be deleted, if present.

@<Declare action...@>=
procedure delete_last;
label exit;
var @!p,@!q:pointer; {run through the current list}
@!m:quarterword; {the length of a replacement list}
begin if (mode=vmode)and(tail=head) then
  @<Apologize for inability to do the operation now,
    unless \.{\\unskip} follows non-glue@>
else  begin if not is_char_node(tail) then if type(tail)=cur_chr then
    begin q:=head;
    repeat p:=q;
    if not is_char_node(q) then if type(q)=disc_node then
      begin for m:=1 to replace_count(q) do p:=link(p);
      if p=tail then return;
      end;
    q:=link(p);
    until q=tail;
    link(p):=null; flush_node_list(tail); tail:=p;
    end;
  end;
exit:end;

@ @<Apologize for inability to do the operation...@>=
begin if (cur_chr<>glue_node)or(last_glue<>max_halfword) then
  begin you_cant;
  help2("Sorry...I usually can't take things from the current page.")@/
    ("Try `I\vskip-\lastskip' instead.");
  if cur_chr=kern_node then help_line[0]:=
    ("Try `I\kern-\lastkern' instead.")
  else if cur_chr<>glue_node then help_line[0]:=@|
    ("Perhaps you can make the output routine do it.");
  error;
  end;
end

@ @<Put each...@>=
primitive("unpenalty",remove_item,penalty_node);@/
@!@:un_penalty_}{\.{\\unpenalty} primitive@>
primitive("unkern",remove_item,kern_node);@/
@!@:un_kern_}{\.{\\unkern} primitive@>
primitive("unskip",remove_item,glue_node);@/
@!@:un_skip_}{\.{\\unskip} primitive@>
primitive("unhbox",un_hbox,box_code);@/
@!@:un_hbox_}{\.{\\unhbox} primitive@>
primitive("unhcopy",un_hbox,copy_code);@/
@!@:un_hcopy_}{\.{\\unhcopy} primitive@>
primitive("unvbox",un_vbox,box_code);@/
@!@:un_vbox_}{\.{\\unvbox} primitive@>
primitive("unvcopy",un_vbox,copy_code);@/
@!@:un_vcopy_}{\.{\\unvcopy} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
remove_item: if chr_code=glue_node then print_esc("unskip")
  else if chr_code=kern_node then print_esc("unkern")
  else print_esc("unpenalty");
un_hbox: if chr_code=copy_code then print_esc("unhcopy")
  else print_esc("unhbox");
un_vbox: if chr_code=copy_code then print_esc("unvcopy")
  else print_esc("unvbox");

@ The |un_hbox| and |un_vbox| commands unwrap one of the 256 current boxes.

@<Cases of |main_control| that build...@>=
vmode+un_vbox,hmode+un_hbox,mmode+un_hbox: unpackage;

@ @<Declare act...@>=
procedure unpackage;
label exit;
var p:pointer; {the box}
@!c:box_code..copy_code; {should we copy?}
begin c:=cur_chr; scan_eight_bit_int; p:=box(cur_val);
if p=null then return;
if (abs(mode)=mmode)or((abs(mode)=vmode)and(type(p)<>vlist_node))or@|
   ((abs(mode)=hmode)and(type(p)<>hlist_node)) then
  begin print_err("Incompatible list can't be unboxed");
@.Incompatible list...@>
  help3("Sorry, Pandora. (You sneaky devil.)")@/
  ("I refuse to unbox an \hbox in vertical mode or vice versa.")@/
  ("And I can't open any boxes in math mode.");@/
  error; return;
  end;
if c=copy_code then link(tail):=copy_node_list(list_ptr(p))
else  begin link(tail):=list_ptr(p); box(cur_val):=null;
  free_node(p,box_node_size);
  end;
while link(tail)<>null do tail:=link(tail);
exit:end;

@ @<Forbidden...@>=vmode+ital_corr,

@ Italic corrections are converted to kern nodes when the |ital_corr| command
follows a character. In math mode the same effect is achieved by appending
a kern of zero here, since italic corrections are supplied later.

@<Cases of |main_control| that build...@>=
hmode+ital_corr: append_italic_correction;
mmode+ital_corr: tail_append(new_kern(0));

@ @<Declare act...@>=
procedure append_italic_correction;
label exit;
var p:pointer; {|char_node| at the tail of the current list}
@!f:internal_font_number; {the font in the |char_node|}
begin if tail<>head then
  begin if is_char_node(tail) then p:=tail
  else if type(tail)=ligature_node then p:=lig_char(tail)
  else return;
  f:=font(p);
  tail_append(new_kern(char_italic(f)(char_info(f)(character(p)))));
  subtype(tail):=explicit;
  end;
exit:end;

@ Discretionary nodes are easy in the common case `\.{\\-}', but in the
general case we must process three braces full of items.

@<Put each...@>=
primitive("-",discretionary,1);
@!@:Single-character primitives -}{\quad\.{\\-}@>
primitive("discretionary",discretionary,0);
@!@:discretionary_}{\.{\\discretionary} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
discretionary: if chr_code=1 then
  print_esc("-")@+else print_esc("discretionary");

@ @<Cases of |main_control| that build...@>=
hmode+discretionary,mmode+discretionary: append_discretionary;

@ The space factor does not change when we append a discretionary node,
but it starts out as 1000 in the subsidiary lists.

@<Declare act...@>=
procedure append_discretionary;
var c:integer; {hyphen character}
begin tail_append(new_disc);
if cur_chr=1 then
  begin c:=hyphen_char[cur_font];
  if c>=0 then if c<256 then pre_break(tail):=new_character(cur_font,c);
  end
else  begin incr(save_ptr); saved(-1):=0; new_save_level(disc_group);
  scan_left_brace; push_nest; mode:=-hmode; space_factor:=1000;
  end;
end;

@ The three discretionary lists are constructed somewhat as if they were
hboxes. A~subroutine called |build_discretionary| handles the transitions.
(This is sort of fun.)

@<Cases of |handle...@>=
disc_group: build_discretionary;

@ @<Declare act...@>=
procedure build_discretionary;
label done,exit;
var p,@!q:pointer; {for link manipulation}
@!n:integer; {length of discretionary list}
begin unsave;
@<Prune the current list, if necessary, until it contains only
  |char_node|, |kern_node|, |hlist_node|, |vlist_node|, |rule_node|,
  and |ligature_node| items; set |n| to the length of the list,
  and set |q| to the list's tail@>;
p:=link(head); pop_nest;
case saved(-1) of
0:pre_break(tail):=p;
1:post_break(tail):=p;
2:@<Attach list |p| to the current list, and record its length;
  then finish up and |return|@>;
end; {there are no other cases}
incr(saved(-1)); new_save_level(disc_group); scan_left_brace;
push_nest; mode:=-hmode; space_factor:=1000;
exit:end;

@ @<Attach list |p| to the current...@>=
begin if (n>0)and(abs(mode)=mmode) then
  begin print_err("Illegal math "); print_esc("discretionary");
@.Illegal math \\disc...@>
  help2("Sorry: The third part of a discretionary break must be")@/
  ("empty, in math formulas. I had to delete your third part.");
  flush_node_list(p); n:=0; error;
  end
else link(tail):=p;
if n<=max_quarterword then replace_count(tail):=n
else  begin print_err("Discretionary list is too long");
@.Discretionary list is too long@>
  help2("Wow---I never thought anybody would tweak me here.")@/
  ("You can't seriously need such a huge discretionary list?");
  error;
  end;
if n>0 then tail:=q;
decr(save_ptr); return;
end

@ During this loop, |p=link(q)| and there are |n| items preceding |p|.

@<Prune the current list, if necessary...@>=
q:=head; p:=link(q); n:=0;
while p<>null do
  begin if not is_char_node(p) then if type(p)>rule_node then
    if type(p)<>kern_node then if type(p)<>ligature_node then
      begin print_err("Improper discretionary list");
@.Improper discretionary list@>
      help1("Discretionary lists must contain only boxes and kerns.");@/
      error;
      begin_diagnostic;
      print_nl("The following discretionary sublist has been deleted:");
@.The following...deleted@>
      show_box(p);
      end_diagnostic(true);
      flush_node_list(p); link(q):=null; goto done;
      end;
  q:=p; p:=link(q); incr(n);
  end;
done:

@ We need only one more thing to complete the horizontal mode routines, namely
the \.{\\accent} primitive.

@<Cases of |main_control| that build...@>=
hmode+accent: make_accent;

@ The positioning of accents is straightforward but tedious. Given an accent
of width |a|, designed for characters of height |x| and slant |s|;
and given a character of width |w|, height |h|, and slant |t|: We will shift
the accent down by |x-h|, and we will insert kern nodes that have the effect of
centering the accent over the character and shifting the accent to the
right by $\delta={1\over2}(w-a)+h\cdot t-x\cdot s$.  If either character is
absent from the font, we will simply use the other, without shifting.

@<Declare act...@>=
procedure make_accent;
var s,@!t: real; {amount of slant}
@!p,@!q,@!r:pointer; {character, box, and kern nodes}
@!f:internal_font_number; {relevant font}
@!a,@!h,@!x,@!w,@!delta:scaled; {heights and widths, as explained above}
@!i:four_quarters; {character information}
begin scan_char_num; f:=cur_font; p:=new_character(f,cur_val);
if p<>null then
  begin x:=x_height(f); s:=slant(f)/float_constant(65536);
@^real division@>
  a:=char_width(f)(char_info(f)(character(p)));@/
  do_assignments;@/
  @<Create a character node |q| for the next character,
    but set |q:=null| if problems arise@>;
  if q<>null then @<Append the accent with appropriate kerns,
      then set |p:=q|@>;
  link(tail):=p; tail:=p; space_factor:=1000;
  end;
end;

@ @<Create a character node |q| for the next...@>=
q:=null; f:=cur_font;
if (cur_cmd=letter)or(cur_cmd=other_char)or(cur_cmd=char_given) then
  q:=new_character(f,cur_chr)
else if cur_cmd=char_num then
  begin scan_char_num; q:=new_character(f,cur_val);
  end
else back_input

@ The kern nodes appended here must be distinguished from other kerns, lest
they be wiped away by the hyphenation algorithm or by a previous line break.

The two kerns are computed with (machine-dependent) |real| arithmetic, but
their sum is machine-independent; the net effect is machine-independent,
because the user cannot remove these nodes nor access them via \.{\\lastkern}.

@<Append the accent with appropriate kerns...@>=
begin t:=slant(f)/float_constant(65536);
@^real division@>
i:=char_info(f)(character(q));
w:=char_width(f)(i); h:=char_height(f)(height_depth(i));
if h<>x then {the accent must be shifted up or down}
  begin p:=hpack(p,natural); shift_amount(p):=x-h;
  end;
delta:=round((w-a)/float_constant(2)+h*t-x*s);
@^real multiplication@>
@^real addition@>
r:=new_kern(delta); subtype(r):=acc_kern; link(tail):=r; link(r):=p;
tail:=new_kern(-a-delta); subtype(tail):=acc_kern; link(p):=tail; p:=q;
end

@ When `\.{\\cr}' or `\.{\\span}' or a tab mark comes through the scanner
into |main_control|, it might be that the user has foolishly inserted
one of them into something that has nothing to do with alignment. But it is
far more likely that a left brace or right brace has been omitted, since
|get_next| takes actions appropriate to alignment only when `\.{\\cr}'
or `\.{\\span}' or tab marks occur with |align_state=0|. The following
program attempts to make an appropriate recovery.

@<Cases of |main_control| that build...@>=
any_mode(car_ret), any_mode(tab_mark): align_error;
any_mode(no_align): no_align_error;
any_mode(omit): omit_error;

@ @<Declare act...@>=
procedure align_error;
begin if abs(align_state)>2 then
  @<Express consternation over the fact that no alignment is in progress@>
else  begin back_input;
  if align_state<0 then
    begin print_err("Missing { inserted");
@.Missing \{ inserted@>
    incr(align_state); cur_tok:=left_brace_token+"{";
    end
  else  begin print_err("Missing } inserted");
@.Missing \} inserted@>
    decr(align_state); cur_tok:=right_brace_token+"}";
    end;
  help3("I've put in what seems to be necessary to fix")@/
    ("the current column of the current alignment.")@/
    ("Try to go on, since this might almost work."); ins_error;
  end;
end;

@ @<Express consternation...@>=
begin print_err("Misplaced "); print_cmd_chr(cur_cmd,cur_chr);
@.Misplaced \&@>
@.Misplaced \\span@>
@.Misplaced \\cr@>
if cur_tok=tab_token+"&" then
  begin help6("I can't figure out why you would want to use a tab mark")@/
  ("here. If you just want an ampersand, the remedy is")@/
  ("simple: Just type `I\&' now. But if some right brace")@/
  ("up above has ended a previous alignment prematurely,")@/
  ("you're probably due for more error messages, and you")@/
  ("might try typing `S' now just to see what is salvageable.");
  end
else  begin help5("I can't figure out why you would want to use a tab mark")@/
  ("or \cr or \span just now. If something like a right brace")@/
  ("up above has ended a previous alignment prematurely,")@/
  ("you're probably due for more error messages, and you")@/
  ("might try typing `S' now just to see what is salvageable.");
  end;
error;
end

@ The help messages here contain a little white lie, since \.{\\noalign}
and \.{\\omit} are allowed also after `\.{\\noalign\{...\}}'.

@<Declare act...@>=
procedure no_align_error;
begin print_err("Misplaced "); print_esc("noalign");
@.Misplaced \\noalign@>
help2("I expect to see \noalign only after the \cr of")@/
  ("an alignment. Proceed, and I'll ignore this case."); error;
end;
procedure omit_error;
begin print_err("Misplaced "); print_esc("omit");
@.Misplaced \\omit@>
help2("I expect to see \omit only after tab marks or the \cr of")@/
  ("an alignment. Proceed, and I'll ignore this case."); error;
end;

@ We've now covered most of the abuses of \.{\\halign} and \.{\\valign}.
Let's take a look at what happens when they are used correctly.

@<Cases of |main_control| that build...@>=
vmode+halign,hmode+valign:init_align;
mmode+halign: if privileged then
  if cur_group=math_shift_group then init_align
  else off_save;
vmode+endv,hmode+endv: do_endv;

@ An |align_group| code is supposed to remain on the |save_stack|
during an entire alignment, until |fin_align| removes it.

A devious user might force an |endv| command to occur just about anywhere;
we must defeat such hacks.

@<Declare act...@>=
procedure do_endv;
begin base_ptr:=input_ptr; input_stack[base_ptr]:=cur_input;
while (input_stack[base_ptr].index_field<>v_template) and
      (input_stack[base_ptr].loc_field=null) and
      (input_stack[base_ptr].state_field=token_list) do decr(base_ptr);
if (input_stack[base_ptr].index_field<>v_template) or
      (input_stack[base_ptr].loc_field<>null) or
      (input_stack[base_ptr].state_field<>token_list) then
  fatal_error("(interwoven alignment preambles are not allowed)");
@.interwoven alignment preambles...@>
 if cur_group=align_group then
  begin end_graf;
  if fin_col then fin_row;
  end
else off_save;
end;

@ @<Cases of |handle_right_brace|...@>=
align_group: begin back_input; cur_tok:=cs_token_flag+frozen_cr;
  print_err("Missing "); print_esc("cr"); print(" inserted");
@.Missing \\cr inserted@>
  help1("I'm guessing that you meant to end an alignment here.");
  ins_error;
  end;

@ @<Cases of |handle_right_brace|...@>=
no_align_group: begin end_graf; unsave; align_peek;
  end;

@ Finally, \.{\\endcsname} is not supposed to get through to |main_control|.

@<Cases of |main_control| that build...@>=
any_mode(end_cs_name): cs_error;

@ @<Declare act...@>=
procedure cs_error;
begin print_err("Extra "); print_esc("endcsname");
@.Extra \\endcsname@>
help1("I'm ignoring this, since I wasn't doing a \csname.");
error;
end;

@* \[48] Building math lists.
The routines that \TeX\ uses to create mlists are similar to those we have
just seen for the generation of hlists and vlists. But it is necessary to
make ``noads'' as well as nodes, so the reader should review the
discussion of math mode data structures before trying to make sense out of
the following program.

Here is a little routine that needs to be done whenever a subformula
is about to be processed. The parameter is a code like |math_group|.

@<Declare act...@>=
procedure push_math(@!c:group_code);
begin push_nest; mode:=-mmode; incompleat_noad:=null; new_save_level(c);
end;

@ We get into math mode from horizontal mode when a `\.\$' (i.e., a
|math_shift| character) is scanned. We must check to see whether this
`\.\$' is immediately followed by another, in case display math mode is
called for.

@<Cases of |main_control| that build...@>=
hmode+math_shift:init_math;

@ @<Declare act...@>=
procedure init_math;
label reswitch,found,not_found,done;
var w:scaled; {new or partial |pre_display_size|}
@!l:scaled; {new |display_width|}
@!s:scaled; {new |display_indent|}
@!p:pointer; {current node when calculating |pre_display_size|}
@!q:pointer; {glue specification when calculating |pre_display_size|}
@!f:internal_font_number; {font in current |char_node|}
@!n:integer; {scope of paragraph shape specification}
@!v:scaled; {|w| plus possible glue amount}
@!d:scaled; {increment to |v|}
begin get_token; {|get_x_token| would fail on \.{\\ifmmode}\thinspace!}
if (cur_cmd=math_shift)and(mode>0) then @<Go into display math mode@>
else  begin back_input; @<Go into ordinary math mode@>;
  end;
end;

@ @<Go into ordinary math mode@>=
begin push_math(math_shift_group); eq_word_define(int_base+cur_fam_code,-1);
if every_math<>null then begin_token_list(every_math,every_math_text);
end

@ We get into ordinary math mode from display math mode when `\.{\\eqno}' or
`\.{\\leqno}' appears. In such cases |cur_chr| will be 0 or~1, respectively;
the value of |cur_chr| is placed onto |save_stack| for safe keeping.

@<Cases of |main_control| that build...@>=
mmode+eq_no: if privileged then
  if cur_group=math_shift_group then start_eq_no
  else off_save;

@ @<Put each...@>=
primitive("eqno",eq_no,0);
@!@:eq_no_}{\.{\\eqno} primitive@>
primitive("leqno",eq_no,1);
@!@:leq_no_}{\.{\\leqno} primitive@>

@ When \TeX\ is in display math mode, |cur_group=math_shift_group|,
so it is not necessary for the |start_eq_no| procedure to test for
this condition.

@<Declare act...@>=
procedure start_eq_no;
begin saved(0):=cur_chr; incr(save_ptr);
@<Go into ordinary math mode@>;
end;

@ @<Cases of |print_cmd_chr|...@>=
eq_no:if chr_code=1 then print_esc("leqno")@+else print_esc("eqno");

@ @<Forbidden...@>=non_math(eq_no),

@ When we enter display math mode, we need to call |line_break| to
process the partial paragraph that has just been interrupted by the
display. Then we can set the proper values of |display_width| and
|display_indent| and |pre_display_size|.

@<Go into display math mode@>=
begin if head=tail then {`\.{\\noindent\$\$}' or `\.{\$\${ }\$\$}'}
  begin pop_nest; w:=-max_dimen;
  end
else  begin line_break(display_widow_penalty);@/
  @<Calculate the natural width, |w|, by which the characters of the
    final line extend to the right of the reference point,
    plus two ems; or set |w:=max_dimen| if the non-blank information
    on that line is affected by stretching or shrinking@>;
  end;
{now we are in vertical mode, working on the list that will contain the display}
@<Calculate the length, |l|, and the shift amount, |s|, of the display lines@>;
push_math(math_shift_group); mode:=mmode;
eq_word_define(int_base+cur_fam_code,-1);@/
eq_word_define(dimen_base+pre_display_size_code,w);
eq_word_define(dimen_base+display_width_code,l);
eq_word_define(dimen_base+display_indent_code,s);
if every_display<>null then begin_token_list(every_display,every_display_text);
if nest_ptr=1 then build_page;
end

@ @<Calculate the natural width, |w|, by which...@>=
v:=shift_amount(just_box)+2*quad(cur_font); w:=-max_dimen;
p:=list_ptr(just_box);
while p<>null do
  begin @<Let |d| be the natural width of node |p|;
    if the node is ``visible,'' |goto found|;
    if the node is glue that stretches or shrinks, set |v:=max_dimen|@>;
  if v<max_dimen then v:=v+d;
  goto not_found;
  found: if v<max_dimen then
    begin v:=v+d; w:=v;
    end
  else  begin w:=max_dimen; goto done;
    end;
  not_found: p:=link(p);
  end;
done:

@ @<Let |d| be the natural width of node |p|...@>=
reswitch: if is_char_node(p) then
  begin f:=font(p); d:=char_width(f)(char_info(f)(character(p)));
  goto found;
  end;
case type(p) of
hlist_node,vlist_node,rule_node: begin d:=width(p); goto found;
  end;
ligature_node:@<Make node |p| look like a |char_node|...@>;
kern_node,math_node: d:=width(p);
glue_node:@<Let |d| be the natural width of this glue; if stretching
  or shrinking, set |v:=max_dimen|; |goto found| in the case of leaders@>;
whatsit_node: @<Let |d| be the width of the whatsit |p|@>;
othercases d:=0
endcases

@ We need to be careful that |w|, |v|, and |d| do not depend on any |glue_set|
values, since such values are subject to system-dependent rounding.
System-dependent numbers are not allowed to infiltrate parameters like
|pre_display_size|, since \TeX82 is supposed to make the same decisions on all
machines.

@<Let |d| be the natural width of this glue...@>=
begin q:=glue_ptr(p); d:=width(q);
if glue_sign(just_box)=stretching then
  begin if (glue_order(just_box)=stretch_order(q))and@|
     (stretch(q)<>0) then
    v:=max_dimen;
  end
else if glue_sign(just_box)=shrinking then
  begin if (glue_order(just_box)=shrink_order(q))and@|
     (shrink(q)<>0) then
    v:=max_dimen;
  end;
if subtype(p)>=a_leaders then goto found;
end

@ A displayed equation is considered to be three lines long, so we
calculate the length and offset of line number |prev_graf+2|.

@<Calculate the length, |l|, ...@>=
if par_shape_ptr=null then
  if (hang_indent<>0)and@|
   (((hang_after>=0)and(prev_graf+2>hang_after))or@|
    (prev_graf+1<-hang_after)) then
    begin l:=hsize-abs(hang_indent);
    if hang_indent>0 then s:=hang_indent@+else s:=0;
    end
  else  begin l:=hsize; s:=0;
    end
else  begin n:=info(par_shape_ptr);
  if prev_graf+2>=n then p:=par_shape_ptr+2*n
  else p:=par_shape_ptr+2*(prev_graf+2);
  s:=mem[p-1].sc; l:=mem[p].sc;
  end

@ Subformulas of math formulas cause a new level of math mode to be entered,
on the semantic nest as well as the save stack. These subformulas arise in
several ways: (1)~A left brace by itself indicates the beginning of a
subformula that will be put into a box, thereby freezing its glue and
preventing line breaks. (2)~A subscript or superscript is treated as a
subformula if it is not a single character; the same applies to
the nucleus of things like \.{\\underline}. (3)~The \.{\\left} primitive
initiates a subformula that will be terminated by a matching \.{\\right}.
The group codes placed on |save_stack| in these three cases are
|math_group|, |math_group|, and |math_left_group|, respectively.

Here is the code that handles case (1); the other cases are not quite as
trivial, so we shall consider them later.

@<Cases of |main_control| that build...@>=
mmode+left_brace: begin tail_append(new_noad);
  back_input; scan_math(nucleus(tail));
  end;

@ Recall that the |nucleus|, |subscr|, and |supscr| fields in a noad are
broken down into subfields called |math_type| and either |info| or
|(fam,character)|. The job of |scan_math| is to figure out what to place
in one of these principal fields; it looks at the subformula that
comes next in the input, and places an encoding of that subformula
into a given word of |mem|.

@d fam_in_range==((cur_fam>=0)and(cur_fam<16))

@<Declare act...@>=
procedure scan_math(@!p:pointer);
label restart,reswitch,exit;
var c:integer; {math character code}
begin restart:@<Get the next non-blank non-relax...@>;
reswitch:case cur_cmd of
letter,other_char,char_given: begin c:=ho(math_code(cur_chr));
    if c=@'100000 then
      begin @<Treat |cur_chr| as an active character@>;
      goto restart;
      end;
    end;
char_num: begin scan_char_num; cur_chr:=cur_val; cur_cmd:=char_given;
  goto reswitch;
  end;
math_char_num: begin scan_fifteen_bit_int; c:=cur_val;
  end;
math_given: c:=cur_chr;
delim_num: begin scan_twenty_seven_bit_int; c:=cur_val div @'10000;
  end;
othercases @<Scan a subformula enclosed in braces and |return|@>
endcases;@/
math_type(p):=math_char; character(p):=qi(c mod 256);
if (c>=var_code)and fam_in_range then fam(p):=cur_fam
else fam(p):=(c div 256) mod 16;
exit:end;

@ An active character that is an |outer_call| is allowed here.

@<Treat |cur_chr|...@>=
begin cur_cs:=cur_chr+active_base;
cur_cmd:=eq_type(cur_cs); cur_chr:=equiv(cur_cs);
x_token; back_input;
end

@ The pointer |p| is placed on |save_stack| while a complex subformula
is being scanned.

@<Scan a subformula...@>=
begin back_input; scan_left_brace;@/
saved(0):=p; incr(save_ptr); push_math(math_group); return;
end

@ The simplest math formula is, of course, `\.{\${ }\$}', when no noads are
generated. The next simplest cases involve a single character, e.g.,
`\.{\$x\$}'. Even though such cases may not seem to be very interesting,
the reader can perhaps understand how happy the author was when `\.{\$x\$}'
was first properly typeset by \TeX. The code in this section was used.
@^Knuth, Donald Ervin@>

@<Cases of |main_control| that build...@>=
mmode+letter,mmode+other_char,mmode+char_given:
  set_math_char(ho(math_code(cur_chr)));
mmode+char_num: begin scan_char_num; cur_chr:=cur_val;
  set_math_char(ho(math_code(cur_chr)));
  end;
mmode+math_char_num: begin scan_fifteen_bit_int; set_math_char(cur_val);
  end;
mmode+math_given: set_math_char(cur_chr);
mmode+delim_num: begin scan_twenty_seven_bit_int;
  set_math_char(cur_val div @'10000);
  end;

@ The |set_math_char| procedure creates a new noad appropriate to a given
math code, and appends it to the current mlist. However, if the math code
is sufficiently large, the |cur_chr| is treated as an active character and
nothing is appended.

@<Declare act...@>=
procedure set_math_char(@!c:integer);
var p:pointer; {the new noad}
begin if c>=@'100000 then
  @<Treat |cur_chr|...@>
else  begin p:=new_noad; math_type(nucleus(p)):=math_char;
  character(nucleus(p)):=qi(c mod 256);
  fam(nucleus(p)):=(c div 256) mod 16;
  if c>=var_code then
    begin if fam_in_range then fam(nucleus(p)):=cur_fam;
    type(p):=ord_noad;
    end
  else  type(p):=ord_noad+(c div @'10000);
  link(tail):=p; tail:=p;
  end;
end;

@ Primitive math operators like \.{\\mathop} and \.{\\underline} are given
the command code |math_comp|, supplemented by the noad type that they
generate.

@<Put each...@>=
primitive("mathord",math_comp,ord_noad);
@!@:math_ord_}{\.{\\mathord} primitive@>
primitive("mathop",math_comp,op_noad);
@!@:math_op_}{\.{\\mathop} primitive@>
primitive("mathbin",math_comp,bin_noad);
@!@:math_bin_}{\.{\\mathbin} primitive@>
primitive("mathrel",math_comp,rel_noad);
@!@:math_rel_}{\.{\\mathrel} primitive@>
primitive("mathopen",math_comp,open_noad);
@!@:math_open_}{\.{\\mathopen} primitive@>
primitive("mathclose",math_comp,close_noad);
@!@:math_close_}{\.{\\mathclose} primitive@>
primitive("mathpunct",math_comp,punct_noad);
@!@:math_punct_}{\.{\\mathpunct} primitive@>
primitive("mathinner",math_comp,inner_noad);
@!@:math_inner_}{\.{\\mathinner} primitive@>
primitive("underline",math_comp,under_noad);
@!@:underline_}{\.{\\underline} primitive@>
primitive("overline",math_comp,over_noad);@/
@!@:overline_}{\.{\\overline} primitive@>
primitive("displaylimits",limit_switch,normal);
@!@:display_limits_}{\.{\\displaylimits} primitive@>
primitive("limits",limit_switch,limits);
@!@:limits_}{\.{\\limits} primitive@>
primitive("nolimits",limit_switch,no_limits);
@!@:no_limits_}{\.{\\nolimits} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
math_comp: case chr_code of
  ord_noad: print_esc("mathord");
  op_noad: print_esc("mathop");
  bin_noad: print_esc("mathbin");
  rel_noad: print_esc("mathrel");
  open_noad: print_esc("mathopen");
  close_noad: print_esc("mathclose");
  punct_noad: print_esc("mathpunct");
  inner_noad: print_esc("mathinner");
  under_noad: print_esc("underline");
  othercases print_esc("overline")
  endcases;
limit_switch: if chr_code=limits then print_esc("limits")
  else if chr_code=no_limits then print_esc("nolimits")
  else print_esc("displaylimits");

@ @<Cases of |main_control| that build...@>=
mmode+math_comp: begin tail_append(new_noad);
  type(tail):=cur_chr; scan_math(nucleus(tail));
  end;
mmode+limit_switch: math_limit_switch;

@ @<Declare act...@>=
procedure math_limit_switch;
label exit;
begin if head<>tail then if type(tail)=op_noad then
  begin subtype(tail):=cur_chr; return;
  end;
print_err("Limit controls must follow a math operator");
@.Limit controls must follow...@>
help1("I'm ignoring this misplaced \limits or \nolimits command."); error;
exit:end;

@ Delimiter fields of noads are filled in by the |scan_delimiter| routine.
The first parameter of this procedure is the |mem| address where the
delimiter is to be placed; the second tells if this delimiter follows
\.{\\radical} or not.

@<Declare act...@>=
procedure scan_delimiter(@!p:pointer;@!r:boolean);
begin if r then scan_twenty_seven_bit_int
else  begin @<Get the next non-blank non-relax...@>;
  case cur_cmd of
  letter,other_char: cur_val:=del_code(cur_chr);
  delim_num: scan_twenty_seven_bit_int;
  othercases cur_val:=-1
  endcases;
  end;
if cur_val<0 then @<Report that an invalid delimiter code is being changed
   to null; set~|cur_val:=0|@>;
small_fam(p):=(cur_val div @'4000000) mod 16;
small_char(p):=qi((cur_val div @'10000) mod 256);
large_fam(p):=(cur_val div 256) mod 16;
large_char(p):=qi(cur_val mod 256);
end;

@ @<Report that an invalid delimiter...@>=
begin print_err("Missing delimiter (. inserted)");
@.Missing delimiter...@>
help6("I was expecting to see something like `(' or `\{' or")@/
  ("`\}' here. If you typed, e.g., `{' instead of `\{', you")@/
  ("should probably delete the `{' by typing `1' now, so that")@/
  ("braces don't get unbalanced. Otherwise just proceed.")@/
  ("Acceptable delimiters are characters whose \delcode is")@/
  ("nonnegative, or you can use `\delimiter <delimiter code>'.");
back_error; cur_val:=0;
end

@ @<Cases of |main_control| that build...@>=
mmode+radical:math_radical;

@ @<Declare act...@>=
procedure math_radical;
begin tail_append(get_node(radical_noad_size));
type(tail):=radical_noad; subtype(tail):=normal;
mem[nucleus(tail)].hh:=empty_field;
mem[subscr(tail)].hh:=empty_field;
mem[supscr(tail)].hh:=empty_field;
scan_delimiter(left_delimiter(tail),true); scan_math(nucleus(tail));
end;

@ @<Cases of |main_control| that build...@>=
mmode+accent,mmode+math_accent:math_ac;

@ @<Declare act...@>=
procedure math_ac;
begin if cur_cmd=accent then
  @<Complain that the user should have said \.{\\mathaccent}@>;
tail_append(get_node(accent_noad_size));
type(tail):=accent_noad; subtype(tail):=normal;
mem[nucleus(tail)].hh:=empty_field;
mem[subscr(tail)].hh:=empty_field;
mem[supscr(tail)].hh:=empty_field;
math_type(accent_chr(tail)):=math_char;
scan_fifteen_bit_int;
character(accent_chr(tail)):=qi(cur_val mod 256);
if (cur_val>=var_code)and fam_in_range then fam(accent_chr(tail)):=cur_fam
else fam(accent_chr(tail)):=(cur_val div 256) mod 16;
scan_math(nucleus(tail));
end;

@ @<Complain that the user should have said \.{\\mathaccent}@>=
begin print_err("Please use "); print_esc("mathaccent");
print(" for accents in math mode");
@.Please use \\mathaccent...@>
help2("I'm changing \accent to \mathaccent here; wish me luck.")@/
  ("(Accents are not the same in formulas as they are in text.)");
error;
end

@ @<Cases of |main_control| that build...@>=
mmode+vcenter: begin scan_spec(vcenter_group,false); normal_paragraph;
  push_nest; mode:=-vmode; prev_depth:=ignore_depth;
  if every_vbox<>null then begin_token_list(every_vbox,every_vbox_text);
  end;

@ @<Cases of |handle...@>=
vcenter_group: begin end_graf; unsave; save_ptr:=save_ptr-2;
  p:=vpack(link(head),saved(1),saved(0)); pop_nest;
  tail_append(new_noad); type(tail):=vcenter_noad;
  math_type(nucleus(tail)):=sub_box; info(nucleus(tail)):=p;
  end;

@ The routine that inserts a |style_node| holds no surprises.

@<Put each...@>=
primitive("displaystyle",math_style,display_style);
@!@:display_style_}{\.{\\displaystyle} primitive@>
primitive("textstyle",math_style,text_style);
@!@:text_style_}{\.{\\textstyle} primitive@>
primitive("scriptstyle",math_style,script_style);
@!@:script_style_}{\.{\\scriptstyle} primitive@>
primitive("scriptscriptstyle",math_style,script_script_style);
@!@:script_script_style_}{\.{\\scriptscriptstyle} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
math_style: print_style(chr_code);

@ @<Cases of |main_control| that build...@>=
mmode+math_style: tail_append(new_style(cur_chr));
mmode+non_script: begin tail_append(new_glue(zero_glue));
  subtype(tail):=cond_math_glue;
  end;
mmode+math_choice: append_choices;

@ The routine that scans the four mlists of a \.{\\mathchoice} is very
much like the routine that builds discretionary nodes.

@<Declare act...@>=
procedure append_choices;
begin tail_append(new_choice); incr(save_ptr); saved(-1):=0;
push_math(math_choice_group); scan_left_brace;
end;

@ @<Cases of |handle_right_brace|...@>=
math_choice_group: build_choices;

@ @<Declare act...@>=
@t\4@>@<Declare the function called |fin_mlist|@>@t@>@;@/
procedure build_choices;
label exit;
var p:pointer; {the current mlist}
begin unsave; p:=fin_mlist(null);
case saved(-1) of
0:display_mlist(tail):=p;
1:text_mlist(tail):=p;
2:script_mlist(tail):=p;
3:begin script_script_mlist(tail):=p; decr(save_ptr); return;
  end;
end; {there are no other cases}
incr(saved(-1)); push_math(math_choice_group); scan_left_brace;
exit:end;

@ Subscripts and superscripts are attached to the previous nucleus by the
@^superscripts@>@^subscripts@>
action procedure called |sub_sup|. We use the facts that |sub_mark=sup_mark+1|
and |subscr(p)=supscr(p)+1|.

@<Cases of |main_control| that build...@>=
mmode+sub_mark,mmode+sup_mark: sub_sup;

@ @<Declare act...@>=
procedure sub_sup;
var t:small_number; {type of previous sub/superscript}
@!p:pointer; {field to be filled by |scan_math|}
begin t:=empty; p:=null;
if tail<>head then if scripts_allowed(tail) then
  begin p:=supscr(tail)+cur_cmd-sup_mark; {|supscr| or |subscr|}
  t:=math_type(p);
  end;
if (p=null)or(t<>empty) then @<Insert a dummy noad to be sub/superscripted@>;
scan_math(p);
end;

@ @<Insert a dummy...@>=
begin tail_append(new_noad);
p:=supscr(tail)+cur_cmd-sup_mark; {|supscr| or |subscr|}
if t<>empty then
  begin if cur_cmd=sup_mark then
    begin print_err("Double superscript");
@.Double superscript@>
    help1("I treat `x^1^2' essentially like `x^1{}^2'.");
    end
  else  begin print_err("Double subscript");
@.Double subscript@>
    help1("I treat `x_1_2' essentially like `x_1{}_2'.");
    end;
  error;
  end;
end

@ An operation like `\.{\\over}' causes the current mlist to go into a
state of suspended animation: |incompleat_noad| points to a |fraction_noad|
that contains the mlist-so-far as its numerator, while the denominator
is yet to come. Finally when the mlist is finished, the denominator will
go into the incompleat fraction noad, and that noad will become the
whole formula, unless it is surrounded by `\.{\\left}' and `\.{\\right}'
delimiters.

@d above_code=0 { `\.{\\above}' }
@d over_code=1 { `\.{\\over}' }
@d atop_code=2 { `\.{\\atop}' }
@d delimited_code=3 { `\.{\\abovewithdelims}', etc.}

@<Put each...@>=
primitive("above",above,above_code);@/
@!@:above_}{\.{\\above} primitive@>
primitive("over",above,over_code);@/
@!@:over_}{\.{\\over} primitive@>
primitive("atop",above,atop_code);@/
@!@:atop_}{\.{\\atop} primitive@>
primitive("abovewithdelims",above,delimited_code+above_code);@/
@!@:above_with_delims_}{\.{\\abovewithdelims} primitive@>
primitive("overwithdelims",above,delimited_code+over_code);@/
@!@:over_with_delims_}{\.{\\overwithdelims} primitive@>
primitive("atopwithdelims",above,delimited_code+atop_code);
@!@:atop_with_delims_}{\.{\\atopwithdelims} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
above: case chr_code of
  over_code:print_esc("over");
  atop_code:print_esc("atop");
  delimited_code+above_code:print_esc("abovewithdelims");
  delimited_code+over_code:print_esc("overwithdelims");
  delimited_code+atop_code:print_esc("atopwithdelims");
  othercases print_esc("above")
  endcases;

@ @<Cases of |main_control| that build...@>=
mmode+above: math_fraction;

@ @<Declare act...@>=
procedure math_fraction;
var c:small_number; {the type of generalized fraction we are scanning}
begin c:=cur_chr;
if incompleat_noad<>null then
  @<Ignore the fraction operation and complain about this ambiguous case@>
else  begin incompleat_noad:=get_node(fraction_noad_size);
  type(incompleat_noad):=fraction_noad;
  subtype(incompleat_noad):=normal;
  math_type(numerator(incompleat_noad)):=sub_mlist;
  info(numerator(incompleat_noad)):=link(head);
  mem[denominator(incompleat_noad)].hh:=empty_field;
  mem[left_delimiter(incompleat_noad)].qqqq:=null_delimiter;
  mem[right_delimiter(incompleat_noad)].qqqq:=null_delimiter;@/
  link(head):=null; tail:=head;
  @<Use code |c| to distinguish between generalized fractions@>;
  end;
end;

@ @<Use code |c|...@>=
if c>=delimited_code then
  begin scan_delimiter(left_delimiter(incompleat_noad),false);
  scan_delimiter(right_delimiter(incompleat_noad),false);
  end;
case c mod delimited_code of
above_code: begin scan_normal_dimen;
  thickness(incompleat_noad):=cur_val;
  end;
over_code: thickness(incompleat_noad):=default_code;
atop_code: thickness(incompleat_noad):=0;
end {there are no other cases}

@ @<Ignore the fraction...@>=
begin if c>=delimited_code then
  begin scan_delimiter(garbage,false); scan_delimiter(garbage,false);
  end;
if c mod delimited_code=above_code then scan_normal_dimen;
print_err("Ambiguous; you need another { and }");
@.Ambiguous...@>
help3("I'm ignoring this fraction specification, since I don't")@/
  ("know whether a construction like `x \over y \over z'")@/
  ("means `{x \over y} \over z' or `x \over {y \over z}'.");
error;
end

@ At the end of a math formula or subformula, the |fin_mlist| routine is
called upon to return a pointer to the newly completed mlist, and to
pop the nest back to the enclosing semantic level. The parameter to
|fin_mlist|, if not null, points to a |right_noad| that ends the
current mlist; this |right_noad| has not yet been appended.

@<Declare the function called |fin_mlist|@>=
function fin_mlist(@!p:pointer):pointer;
var q:pointer; {the mlist to return}
begin if incompleat_noad<>null then @<Compleat the incompleat noad@>
else  begin link(tail):=p; q:=link(head);
  end;
pop_nest; fin_mlist:=q;
end;

@ @<Compleat...@>=
begin math_type(denominator(incompleat_noad)):=sub_mlist;
info(denominator(incompleat_noad)):=link(head);
if p=null then q:=incompleat_noad
else  begin q:=info(numerator(incompleat_noad));
  if type(q)<>left_noad then confusion("right");
@:this can't happen right}{\quad right@>
  info(numerator(incompleat_noad)):=link(q);
  link(q):=incompleat_noad; link(incompleat_noad):=p;
  end;
end

@ Now at last we're ready to see what happens when a right brace occurs
in a math formula. Two special cases are simplified here: Braces are effectively
removed when they surround a single Ord without sub/superscripts, or when they
surround an accent that is the nucleus of an Ord atom.

@<Cases of |handle...@>=
math_group: begin unsave; decr(save_ptr);@/
  math_type(saved(0)):=sub_mlist; p:=fin_mlist(null); info(saved(0)):=p;
  if p<>null then if link(p)=null then
   if type(p)=ord_noad then
    begin if math_type(subscr(p))=empty then
     if math_type(supscr(p))=empty then
      begin mem[saved(0)].hh:=mem[nucleus(p)].hh;
      free_node(p,noad_size);
      end;
    end
  else if type(p)=accent_noad then if saved(0)=nucleus(tail) then
   if type(tail)=ord_noad then @<Replace the tail of the list by |p|@>;
  end;

@ @<Replace the tail...@>=
begin q:=head; while link(q)<>tail do q:=link(q);
link(q):=p; free_node(tail,noad_size); tail:=p;
end

@ We have dealt with all constructions of math mode except `\.{\\left}' and
`\.{\\right}', so the picture is completed by the following sections of
the program.

@<Put each...@>=
primitive("left",left_right,left_noad);
@!@:left_}{\.{\\left} primitive@>
primitive("right",left_right,right_noad);
@!@:right_}{\.{\\right} primitive@>
text(frozen_right):="right"; eqtb[frozen_right]:=eqtb[cur_val];

@ @<Cases of |print_cmd_chr|...@>=
left_right: if chr_code=left_noad then print_esc("left")
else print_esc("right");

@ @<Cases of |main_control| that build...@>=
mmode+left_right: math_left_right;

@ @<Declare act...@>=
procedure math_left_right;
var t:small_number; {|left_noad| or |right_noad|}
@!p:pointer; {new noad}
begin t:=cur_chr;
if (t=right_noad)and(cur_group<>math_left_group) then
  @<Try to recover from mismatched \.{\\right}@>
else  begin p:=new_noad; type(p):=t;
  scan_delimiter(delimiter(p),false);
  if t=left_noad then
    begin push_math(math_left_group); link(head):=p; tail:=p;
    end
  else  begin p:=fin_mlist(p); unsave; {end of |math_left_group|}
    tail_append(new_noad); type(tail):=inner_noad;
    math_type(nucleus(tail)):=sub_mlist;
    info(nucleus(tail)):=p;
    end;
  end;
end;

@ @<Try to recover from mismatch...@>=
begin if cur_group=math_shift_group then
  begin scan_delimiter(garbage,false);
  print_err("Extra "); print_esc("right");
@.Extra \\right.@>
  help1("I'm ignoring a \right that had no matching \left.");
  error;
  end
else off_save;
end

@ Here is the only way out of math mode.

@<Cases of |main_control| that build...@>=
mmode+math_shift: if cur_group=math_shift_group then after_math
  else off_save;

@ @<Declare act...@>=
procedure after_math;
var l:boolean; {`\.{\\leqno}' instead of `\.{\\eqno}'}
@!danger:boolean; {not enough symbol fonts are present}
@!m:integer; {|mmode| or |-mmode|}
@!p:pointer; {the formula}
@!a:pointer; {box containing equation number}
@<Local variables for finishing a displayed formula@>@;
begin danger:=false;
@<Check that the necessary fonts for math symbols are present;
  if not, flush the current math lists and set |danger:=true|@>;
m:=mode; l:=false; p:=fin_mlist(null); {this pops the nest}
if mode=-m then {end of equation number}
  begin @<Check that another \.\$ follows@>;
  cur_mlist:=p; cur_style:=text_style; mlist_penalties:=false;
  mlist_to_hlist; a:=hpack(link(temp_head),natural);
  unsave; decr(save_ptr); {now |cur_group=math_shift_group|}
  if saved(0)=1 then l:=true;
  danger:=false;
  @<Check that the necessary fonts for math symbols are present;
    if not, flush the current math lists and set |danger:=true|@>;
  m:=mode; p:=fin_mlist(null);
  end
else a:=null;
if m<0 then @<Finish math in text@>
else  begin if a=null then @<Check that another \.\$ follows@>;
  @<Finish displayed math@>;
  end;
end;

@ @<Check that the necessary fonts...@>=
if (font_params[fam_fnt(2+text_size)]<total_mathsy_params)or@|
   (font_params[fam_fnt(2+script_size)]<total_mathsy_params)or@|
   (font_params[fam_fnt(2+script_script_size)]<total_mathsy_params) then
  begin print_err("Math formula deleted: Insufficient symbol fonts");@/
@.Math formula deleted...@>
  help3("Sorry, but I can't typeset math unless \textfont 2")@/
    ("and \scriptfont 2 and \scriptscriptfont 2 have all")@/
    ("the \fontdimen values needed in math symbol fonts.");
  error; flush_math; danger:=true;
  end
else if (font_params[fam_fnt(3+text_size)]<total_mathex_params)or@|
   (font_params[fam_fnt(3+script_size)]<total_mathex_params)or@|
   (font_params[fam_fnt(3+script_script_size)]<total_mathex_params) then
  begin print_err("Math formula deleted: Insufficient extension fonts");@/
  help3("Sorry, but I can't typeset math unless \textfont 3")@/
    ("and \scriptfont 3 and \scriptscriptfont 3 have all")@/
    ("the \fontdimen values needed in math extension fonts.");
  error; flush_math; danger:=true;
  end

@ The |unsave| is done after everything else here; hence an appearance of
`\.{\\mathsurround}' inside of `\.{\$...\$}' affects the spacing at these
particular \.\$'s. This is consistent with the conventions of
`\.{\$\$...\$\$}', since `\.{\\abovedisplayskip}' inside a display affects the
space above that display.

@<Finish math in text@>=
begin tail_append(new_math(math_surround,before));
cur_mlist:=p; cur_style:=text_style; mlist_penalties:=(mode>0); mlist_to_hlist;
link(tail):=link(temp_head);
while link(tail)<>null do tail:=link(tail);
tail_append(new_math(math_surround,after));
space_factor:=1000; unsave;
end

@ \TeX\ gets to the following part of the program when the first `\.\$' ending
a display has been scanned.

@<Check that another \.\$ follows@>=
begin get_x_token;
if cur_cmd<>math_shift then
  begin print_err("Display math should end with $$");
@.Display math...with \$\$@>
  help2("The `$' that I just saw supposedly matches a previous `$$'.")@/
    ("So I shall assume that you typed `$$' both times.");
  back_error;
  end;
end

@ We have saved the worst for last: The fussiest part of math mode processing
occurs when a displayed formula is being centered and placed with an optional
equation number.

@<Local variables for finishing...@>=
@!b:pointer; {box containing the equation}
@!w:scaled; {width of the equation}
@!z:scaled; {width of the line}
@!e:scaled; {width of equation number}
@!q:scaled; {width of equation number plus space to separate from equation}
@!d:scaled; {displacement of equation in the line}
@!s:scaled; {move the line right this much}
@!g1,@!g2:small_number; {glue parameter codes for before and after}
@!r:pointer; {kern node used to position the display}
@!t:pointer; {tail of adjustment list}

@ At this time |p| points to the mlist for the formula; |a| is either
|null| or it points to a box containing the equation number; and we are in
vertical mode (or internal vertical mode).

@<Finish displayed math@>=
cur_mlist:=p; cur_style:=display_style; mlist_penalties:=false;
mlist_to_hlist; p:=link(temp_head);@/
adjust_tail:=adjust_head; b:=hpack(p,natural); p:=list_ptr(b);
t:=adjust_tail; adjust_tail:=null;@/
w:=width(b); z:=display_width; s:=display_indent;
if (a=null)or danger then
  begin e:=0; q:=0;
  end
else  begin e:=width(a); q:=e+math_quad(text_size);
  end;
if w+q>z then
  @<Squeeze the equation as much as possible; if there is an equation
    number that should go on a separate line by itself,
    set~|e:=0|@>;
@<Determine the displacement, |d|, of the left edge of the equation, with
  respect to the line size |z|, assuming that |l=false|@>;
@<Append the glue or equation number preceding the display@>;
@<Append the display and perhaps also the equation number@>;
@<Append the glue or equation number following the display@>;
resume_after_display

@ @<Declare act...@>=
procedure resume_after_display;
begin if cur_group<>math_shift_group then confusion("display");
@:this can't happen display}{\quad display@>
unsave; prev_graf:=prev_graf+3;
push_nest; mode:=hmode; space_factor:=1000; set_cur_lang; clang:=cur_lang;
prev_graf:=(norm_min(left_hyphen_min)*@'100+norm_min(right_hyphen_min))
             *@'200000+cur_lang;
@<Scan an optional space@>;
if nest_ptr=1 then build_page;
end;

@ The user can force the equation number to go on a separate line
by causing its width to be zero.

@<Squeeze the equation as much as possible...@>=
begin if (e<>0)and((w-total_shrink[normal]+q<=z)or@|
   (total_shrink[fil]<>0)or(total_shrink[fill]<>0)or
   (total_shrink[filll]<>0)) then
  begin free_node(b,box_node_size);
  b:=hpack(p,z-q,exactly);
  end
else  begin e:=0;
  if w>z then
    begin free_node(b,box_node_size);
    b:=hpack(p,z,exactly);
    end;
  end;
w:=width(b);
end

@ We try first to center the display without regard to the existence of
the equation number. If that would make it too close (where ``too close''
means that the space between display and equation number is less than the
width of the equation number), we either center it in the remaining space
or move it as far from the equation number as possible. The latter alternative
is taken only if the display begins with glue, since we assume that the
user put glue there to control the spacing precisely.

@<Determine the displacement, |d|, of the left edge of the equation...@>=
d:=half(z-w);
if (e>0)and(d<2*e) then {too close}
  begin d:=half(z-w-e);
  if p<>null then if not is_char_node(p) then if type(p)=glue_node then d:=0;
  end

@ If the equation number is set on a line by itself, either before or
after the formula, we append an infinite penalty so that no page break will
separate the display from its number; and we use the same size and
displacement for all three potential lines of the display, even though
`\.{\\parshape}' may specify them differently.

@<Append the glue or equation number preceding the display@>=
tail_append(new_penalty(pre_display_penalty));@/
if (d+s<=pre_display_size)or l then {not enough clearance}
  begin g1:=above_display_skip_code; g2:=below_display_skip_code;
  end
else  begin g1:=above_display_short_skip_code;
  g2:=below_display_short_skip_code;
  end;
if l and(e=0) then {it follows that |type(a)=hlist_node|}
  begin shift_amount(a):=s; append_to_vlist(a);
  tail_append(new_penalty(inf_penalty));
  end
else tail_append(new_param_glue(g1))

@ @<Append the display and perhaps also the equation number@>=
if e<>0 then
  begin r:=new_kern(z-w-e-d);
  if l then
    begin link(a):=r; link(r):=b; b:=a; d:=0;
    end
  else  begin link(b):=r; link(r):=a;
    end;
  b:=hpack(b,natural);
  end;
shift_amount(b):=s+d; append_to_vlist(b)

@ @<Append the glue or equation number following the display@>=
if (a<>null)and(e=0)and not l then
  begin tail_append(new_penalty(inf_penalty));
  shift_amount(a):=s+z-width(a);
  append_to_vlist(a);
  g2:=0;
  end;
if t<>adjust_head then {migrating material comes after equation number}
  begin link(tail):=link(adjust_head); tail:=t;
  end;
tail_append(new_penalty(post_display_penalty));
if g2>0 then tail_append(new_param_glue(g2))

@ When \.{\\halign} appears in a display, the alignment routines operate
essentially as they do in vertical mode. Then the following program is
activated, with |p| and |q| pointing to the beginning and end of the
resulting list, and with |aux_save| holding the |prev_depth| value.

@<Finish an alignment in a display@>=
begin do_assignments;
if cur_cmd<>math_shift then @<Pontificate about improper alignment in display@>
else @<Check that another \.\$ follows@>;
pop_nest;
tail_append(new_penalty(pre_display_penalty));
tail_append(new_param_glue(above_display_skip_code));
link(tail):=p;
if p<>null then tail:=q;
tail_append(new_penalty(post_display_penalty));
tail_append(new_param_glue(below_display_skip_code));
prev_depth:=aux_save.sc; resume_after_display;
end

@ @<Pontificate...@>=
begin print_err("Missing $$ inserted");
@.Missing {\$\$} inserted@>
help2("Displays can use special alignments (like \eqalignno)")@/
  ("only if nothing but the alignment itself is between $$'s.");
back_error;
end

@* \[49] Mode-independent processing.
The long |main_control| procedure has now been fully specified, except for
certain activities that are independent of the current mode. These activities
do not change the current vlist or hlist or mlist; if they change anything,
it is the value of a parameter or the meaning of a control sequence.

Assignments to values in |eqtb| can be global or local. Furthermore, a
control sequence can be defined to be `\.{\\long}' or `\.{\\outer}', and
it might or might not be expanded. The prefixes `\.{\\global}', `\.{\\long}',
and `\.{\\outer}' can occur in any order. Therefore we assign binary numeric
codes, making it possible to accumulate the union of all specified prefixes
by adding the corresponding codes.  (\PASCAL's |set| operations could also
have been used.)

@<Put each...@>=
primitive("long",prefix,1);
@!@:long_}{\.{\\long} primitive@>
primitive("outer",prefix,2);
@!@:outer_}{\.{\\outer} primitive@>
primitive("global",prefix,4);
@!@:global_}{\.{\\global} primitive@>
primitive("def",def,0);
@!@:def_}{\.{\\def} primitive@>
primitive("gdef",def,1);
@!@:gdef_}{\.{\\gdef} primitive@>
primitive("edef",def,2);
@!@:edef_}{\.{\\edef} primitive@>
primitive("xdef",def,3);
@!@:xdef_}{\.{\\xdef} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
prefix: if chr_code=1 then print_esc("long")
  else if chr_code=2 then print_esc("outer")
  else print_esc("global");
def: if chr_code=0 then print_esc("def")
  else if chr_code=1 then print_esc("gdef")
  else if chr_code=2 then print_esc("edef")
  else print_esc("xdef");

@ Every prefix, and every command code that might or might not be prefixed,
calls the action procedure |prefixed_command|. This routine accumulates
a sequence of prefixes until coming to a non-prefix, then it carries out
the command.

@<Cases of |main_control| that don't...@>=
any_mode(toks_register),
any_mode(assign_toks),
any_mode(assign_int),
any_mode(assign_dimen),
any_mode(assign_glue),
any_mode(assign_mu_glue),
any_mode(assign_font_dimen),
any_mode(assign_font_int),
any_mode(set_aux),
any_mode(set_prev_graf),
any_mode(set_page_dimen),
any_mode(set_page_int),
any_mode(set_box_dimen),
any_mode(set_shape),
any_mode(def_code),
any_mode(def_family),
any_mode(set_font),
any_mode(def_font),
any_mode(register),
any_mode(advance),
any_mode(multiply),
any_mode(divide),
any_mode(prefix),
any_mode(let),
any_mode(shorthand_def),
any_mode(read_to_cs),
any_mode(def),
any_mode(set_box),
any_mode(hyph_data),
any_mode(set_interaction):prefixed_command;

@ If the user says, e.g., `\.{\\global\\global}', the redundancy is
silently accepted.

@<Declare act...@>=
@t\4@>@<Declare subprocedures for |prefixed_command|@>@t@>@;@/
procedure prefixed_command;
label done,exit;
var a:small_number; {accumulated prefix codes so far}
@!f:internal_font_number; {identifies a font}
@!j:halfword; {index into a \.{\\parshape} specification}
@!k:font_index; {index into |font_info|}
@!p,@!q:pointer; {for temporary short-term use}
@!n:integer; {ditto}
@!e:boolean; {should a definition be expanded? or was \.{\\let} not done?}
begin a:=0;
while cur_cmd=prefix do
  begin if not odd(a div cur_chr) then a:=a+cur_chr;
  @<Get the next non-blank non-relax...@>;
  if cur_cmd<=max_non_prefixed_command then
    @<Discard erroneous prefixes and |return|@>;
  end;
@<Discard the prefixes \.{\\long} and \.{\\outer} if they are irrelevant@>;
@<Adjust \(f)for the setting of \.{\\globaldefs}@>;
case cur_cmd of
@t\4@>@<Assignments@>@;
othercases confusion("prefix")
@:this can't happen prefix}{\quad prefix@>
endcases;
done: @<Insert a token saved by \.{\\afterassignment}, if any@>;
exit:end;

@ @<Discard erroneous...@>=
begin print_err("You can't use a prefix with `");
@.You can't use a prefix with x@>
print_cmd_chr(cur_cmd,cur_chr); print_char("'");
help1("I'll pretend you didn't say \long or \outer or \global.");
back_error; return;
end

@ @<Discard the prefixes...@>=
if (cur_cmd<>def)and(a mod 4<>0) then
  begin print_err("You can't use `"); print_esc("long"); print("' or `");
  print_esc("outer"); print("' with `");
@.You can't use \\long...@>
  print_cmd_chr(cur_cmd,cur_chr); print_char("'");
  help1("I'll pretend you didn't say \long or \outer here.");
  error;
  end

@ The previous routine does not have to adjust |a| so that |a mod 4=0|,
since the following routines test for the \.{\\global} prefix as follows.

@d global==(a>=4)
@d define(#)==if global then geq_define(#)@+else eq_define(#)
@d word_define(#)==if global then geq_word_define(#)@+else eq_word_define(#)

@<Adjust \(f)for the setting of \.{\\globaldefs}@>=
if global_defs<>0 then
  if global_defs<0 then
    begin if global then a:=a-4;
    end
  else  begin if not global then a:=a+4;
    end

@ When a control sequence is to be defined, by \.{\\def} or \.{\\let} or
something similar, the |get_r_token| routine will substitute a special
control sequence for a token that is not redefinable.

@<Declare subprocedures for |prefixed_command|@>=
procedure get_r_token;
label restart;
begin restart: repeat get_token;
until cur_tok<>space_token;
if (cur_cs=0)or(cur_cs>frozen_control_sequence) then
  begin print_err("Missing control sequence inserted");
@.Missing control...@>
  help5("Please don't say `\def cs{...}', say `\def\cs{...}'.")@/
  ("I've inserted an inaccessible control sequence so that your")@/
  ("definition will be completed without mixing me up too badly.")@/
  ("You can recover graciously from this error, if you're")@/
  ("careful; see exercise 27.2 in The TeXbook.");
@:TeXbook}{\sl The \TeX book@>
  if cur_cs=0 then back_input;
  cur_tok:=cs_token_flag+frozen_protection; ins_error; goto restart;
  end;
end;

@ @<Initialize table entries...@>=
text(frozen_protection):="inaccessible";

@ Here's an example of the way many of the following routines operate.
(Unfortunately, they aren't all as simple as this.)

@<Assignments@>=
set_font: define(cur_font_loc,data,cur_chr);

@ When a |def| command has been scanned,
|cur_chr| is odd if the definition is supposed to be global, and
|cur_chr>=2| if the definition is supposed to be expanded.

@<Assignments@>=
def: begin if odd(cur_chr)and not global and(global_defs>=0) then a:=a+4;
  e:=(cur_chr>=2); get_r_token; p:=cur_cs;
  q:=scan_toks(true,e); define(p,call+(a mod 4),def_ref);
  end;

@ Both \.{\\let} and \.{\\futurelet} share the command code |let|.

@<Put each...@>=
primitive("let",let,normal);@/
@!@:let_}{\.{\\let} primitive@>
primitive("futurelet",let,normal+1);@/
@!@:future_let_}{\.{\\futurelet} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
let: if chr_code<>normal then print_esc("futurelet")@+else print_esc("let");

@ @<Assignments@>=
let:  begin n:=cur_chr;
  get_r_token; p:=cur_cs;
  if n=normal then
    begin repeat get_token;
    until cur_cmd<>spacer;
    if cur_tok=other_token+"=" then
      begin get_token;
      if cur_cmd=spacer then get_token;
      end;
    end
  else  begin get_token; q:=cur_tok; get_token; back_input;
    cur_tok:=q; back_input; {look ahead, then back up}
    end; {note that |back_input| doesn't affect |cur_cmd|, |cur_chr|}
  if cur_cmd>=call then add_token_ref(cur_chr);
  define(p,cur_cmd,cur_chr);
  end;

@ A \.{\\chardef} creates a control sequence whose |cmd| is |char_given|;
a \.{\\mathchardef} creates a control sequence whose |cmd| is |math_given|;
and the corresponding |chr| is the character code or math code. A \.{\\countdef}
or \.{\\dimendef} or \.{\\skipdef} or \.{\\muskipdef} creates a control
sequence whose |cmd| is |assign_int| or \dots\ or |assign_mu_glue|, and the
corresponding |chr| is the |eqtb| location of the internal register in question.

@d char_def_code=0 {|shorthand_def| for \.{\\chardef}}
@d math_char_def_code=1 {|shorthand_def| for \.{\\mathchardef}}
@d count_def_code=2 {|shorthand_def| for \.{\\countdef}}
@d dimen_def_code=3 {|shorthand_def| for \.{\\dimendef}}
@d skip_def_code=4 {|shorthand_def| for \.{\\skipdef}}
@d mu_skip_def_code=5 {|shorthand_def| for \.{\\muskipdef}}
@d toks_def_code=6 {|shorthand_def| for \.{\\toksdef}}

@<Put each...@>=
primitive("chardef",shorthand_def,char_def_code);@/
@!@:char_def_}{\.{\\chardef} primitive@>
primitive("mathchardef",shorthand_def,math_char_def_code);@/
@!@:math_char_def_}{\.{\\mathchardef} primitive@>
primitive("countdef",shorthand_def,count_def_code);@/
@!@:count_def_}{\.{\\countdef} primitive@>
primitive("dimendef",shorthand_def,dimen_def_code);@/
@!@:dimen_def_}{\.{\\dimendef} primitive@>
primitive("skipdef",shorthand_def,skip_def_code);@/
@!@:skip_def_}{\.{\\skipdef} primitive@>
primitive("muskipdef",shorthand_def,mu_skip_def_code);@/
@!@:mu_skip_def_}{\.{\\muskipdef} primitive@>
primitive("toksdef",shorthand_def,toks_def_code);@/
@!@:toks_def_}{\.{\\toksdef} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
shorthand_def: case chr_code of
  char_def_code: print_esc("chardef");
  math_char_def_code: print_esc("mathchardef");
  count_def_code: print_esc("countdef");
  dimen_def_code: print_esc("dimendef");
  skip_def_code: print_esc("skipdef");
  mu_skip_def_code: print_esc("muskipdef");
  othercases print_esc("toksdef")
  endcases;
char_given: begin print_esc("char"); print_hex(chr_code);
  end;
math_given: begin print_esc("mathchar"); print_hex(chr_code);
  end;

@ We temporarily define |p| to be |relax|, so that an occurrence of |p|
while scanning the definition will simply stop the scanning instead of
producing an ``undefined control sequence'' error or expanding the
previous meaning.  This allows, for instance, `\.{\\chardef\\foo=123\\foo}'.

@<Assignments@>=
shorthand_def: begin n:=cur_chr; get_r_token; p:=cur_cs; define(p,relax,256);
  scan_optional_equals;
  case n of
  char_def_code: begin scan_char_num; define(p,char_given,cur_val);
    end;
  math_char_def_code: begin scan_fifteen_bit_int; define(p,math_given,cur_val);
    end;
  othercases begin scan_eight_bit_int;
    case n of
    count_def_code: define(p,assign_int,count_base+cur_val);
    dimen_def_code: define(p,assign_dimen,scaled_base+cur_val);
    skip_def_code: define(p,assign_glue,skip_base+cur_val);
    mu_skip_def_code: define(p,assign_mu_glue,mu_skip_base+cur_val);
    toks_def_code: define(p,assign_toks,toks_base+cur_val);
    end; {there are no other cases}
    end
  endcases;
  end;

@ @<Assignments@>=
read_to_cs: begin scan_int; n:=cur_val;
  if not scan_keyword("to") then
    begin print_err("Missing `to' inserted");
@.Missing `to'...@>
    help2("You should have said `\read<number> to \cs'.")@/
    ("I'm going to look for the \cs now."); error;
    end;
  get_r_token;
  p:=cur_cs; read_toks(n,p); define(p,call,cur_val);
  end;

@ The token-list parameters, \.{\\output} and \.{\\everypar}, etc., receive
their values in the following way. (For safety's sake, we place an
enclosing pair of braces around an \.{\\output} list.)

@<Assignments@>=
toks_register,assign_toks: begin q:=cur_cs;
  if cur_cmd=toks_register then
    begin scan_eight_bit_int; p:=toks_base+cur_val;
    end
  else p:=cur_chr; {|p=every_par_loc| or |output_routine_loc| or \dots}
  scan_optional_equals;
  @<Get the next non-blank non-relax non-call token@>;
  if cur_cmd<>left_brace then @<If the right-hand side is a token parameter
      or token register, finish the assignment and |goto done|@>;
  back_input; cur_cs:=q; q:=scan_toks(false,false);
  if link(def_ref)=null then {empty list: revert to the default}
    begin define(p,undefined_cs,null); free_avail(def_ref);
    end
  else  begin if p=output_routine_loc then {enclose in curlies}
      begin link(q):=get_avail; q:=link(q);
      info(q):=right_brace_token+"}";
      q:=get_avail; info(q):=left_brace_token+"{";
      link(q):=link(def_ref); link(def_ref):=q;
      end;
    define(p,call,def_ref);
    end;
  end;

@ @<If the right-hand side is a token parameter...@>=
begin if cur_cmd=toks_register then
  begin scan_eight_bit_int; cur_cmd:=assign_toks; cur_chr:=toks_base+cur_val;
  end;
if cur_cmd=assign_toks then
  begin q:=equiv(cur_chr);
  if q=null then define(p,undefined_cs,null)
  else  begin add_token_ref(q); define(p,call,q);
    end;
  goto done;
  end;
end

@ Similar routines are used to assign values to the numeric parameters.

@<Assignments@>=
assign_int: begin p:=cur_chr; scan_optional_equals; scan_int;
  word_define(p,cur_val);
  end;
assign_dimen: begin p:=cur_chr; scan_optional_equals;
  scan_normal_dimen; word_define(p,cur_val);
  end;
assign_glue,assign_mu_glue: begin p:=cur_chr; n:=cur_cmd; scan_optional_equals;
  if n=assign_mu_glue then scan_glue(mu_val)@+else scan_glue(glue_val);
  trap_zero_glue;
  define(p,glue_ref,cur_val);
  end;

@ When a glue register or parameter becomes zero, it will always point to
|zero_glue| because of the following procedure. (Exception: The tabskip
glue isn't trapped while preambles are being scanned.)

@<Declare subprocedures for |prefixed_command|@>=
procedure trap_zero_glue;
begin if (width(cur_val)=0)and(stretch(cur_val)=0)and(shrink(cur_val)=0) then
  begin add_glue_ref(zero_glue);
  delete_glue_ref(cur_val); cur_val:=zero_glue;
  end;
end;

@ The various character code tables are changed by the |def_code| commands,
and the font families are declared by |def_family|.

@<Put each...@>=
primitive("catcode",def_code,cat_code_base);
@!@:cat_code_}{\.{\\catcode} primitive@>
primitive("mathcode",def_code,math_code_base);
@!@:math_code_}{\.{\\mathcode} primitive@>
primitive("lccode",def_code,lc_code_base);
@!@:lc_code_}{\.{\\lccode} primitive@>
primitive("uccode",def_code,uc_code_base);
@!@:uc_code_}{\.{\\uccode} primitive@>
primitive("sfcode",def_code,sf_code_base);
@!@:sf_code_}{\.{\\sfcode} primitive@>
primitive("delcode",def_code,del_code_base);
@!@:del_code_}{\.{\\delcode} primitive@>
primitive("textfont",def_family,math_font_base);
@!@:text_font_}{\.{\\textfont} primitive@>
primitive("scriptfont",def_family,math_font_base+script_size);
@!@:script_font_}{\.{\\scriptfont} primitive@>
primitive("scriptscriptfont",def_family,math_font_base+script_script_size);
@!@:script_script_font_}{\.{\\scriptscriptfont} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
def_code: if chr_code=cat_code_base then print_esc("catcode")
  else if chr_code=math_code_base then print_esc("mathcode")
  else if chr_code=lc_code_base then print_esc("lccode")
  else if chr_code=uc_code_base then print_esc("uccode")
  else if chr_code=sf_code_base then print_esc("sfcode")
  else print_esc("delcode");
def_family: print_size(chr_code-math_font_base);

@ The different types of code values have different legal ranges; the
following program is careful to check each case properly.

@<Assignments@>=
def_code: begin @<Let |n| be the largest legal code value, based on |cur_chr|@>;
  p:=cur_chr; scan_char_num; p:=p+cur_val; scan_optional_equals;
  scan_int;
  if ((cur_val<0)and(p<del_code_base))or(cur_val>n) then
    begin print_err("Invalid code ("); print_int(cur_val);
@.Invalid code@>
    if p<del_code_base then print("), should be in the range 0..")
    else print("), should be at most ");
    print_int(n);
    help1("I'm going to use 0 instead of that illegal code value.");@/
    error; cur_val:=0;
    end;
  if p<math_code_base then define(p,data,cur_val)
  else if p<del_code_base then define(p,data,hi(cur_val))
  else word_define(p,cur_val);
  end;

@ @<Let |n| be the largest...@>=
if cur_chr=cat_code_base then n:=max_char_code
else if cur_chr=math_code_base then n:=@'100000
else if cur_chr=sf_code_base then n:=@'77777
else if cur_chr=del_code_base then n:=@'77777777
else n:=255

@ @<Assignments@>=
def_family: begin p:=cur_chr; scan_four_bit_int; p:=p+cur_val;
  scan_optional_equals; scan_font_ident; define(p,data,cur_val);
  end;

@ Next we consider changes to \TeX's numeric registers.

@<Assignments@>=
register,advance,multiply,divide: do_register_command(a);

@ We use the fact that |register<advance<multiply<divide|.

@<Declare subprocedures for |prefixed_command|@>=
procedure do_register_command(@!a:small_number);
label found,exit;
var l,@!q,@!r,@!s:pointer; {for list manipulation}
@!p:int_val..mu_val; {type of register involved}
begin q:=cur_cmd;
@<Compute the register location |l| and its type |p|; but |return| if invalid@>;
if q=register then scan_optional_equals
else if scan_keyword("by") then do_nothing; {optional `\.{by}'}
arith_error:=false;
if q<multiply then @<Compute result of |register| or
    |advance|, put it in |cur_val|@>
else @<Compute result of |multiply| or |divide|, put it in |cur_val|@>;
if arith_error then
  begin print_err("Arithmetic overflow");
@.Arithmetic overflow@>
  help2("I can't carry out that multiplication or division,")@/
    ("since the result is out of range.");
  error; return;
  end;
if p<glue_val then word_define(l,cur_val)
else  begin trap_zero_glue; define(l,glue_ref,cur_val);
  end;
exit: end;

@ Here we use the fact that the consecutive codes |int_val...mu_val| and
|assign_int..assign_mu_glue| correspond to each other nicely.

@<Compute the register location |l| and its type |p|...@>=
begin if q<>register then
  begin get_x_token;
  if (cur_cmd>=assign_int)and(cur_cmd<=assign_mu_glue) then
    begin l:=cur_chr; p:=cur_cmd-assign_int; goto found;
    end;
  if cur_cmd<>register then
    begin print_err("You can't use `"); print_cmd_chr(cur_cmd,cur_chr);
@.You can't use x after ...@>
    print("' after "); print_cmd_chr(q,0);
    help1("I'm forgetting what you said and not changing anything.");
    error; return;
    end;
  end;
p:=cur_chr; scan_eight_bit_int;
case p of
int_val: l:=cur_val+count_base;
dimen_val: l:=cur_val+scaled_base;
glue_val: l:=cur_val+skip_base;
mu_val: l:=cur_val+mu_skip_base;
end; {there are no other cases}
end;
found:

@ @<Compute result of |register| or |advance|...@>=
if p<glue_val then
  begin if p=int_val then scan_int@+else scan_normal_dimen;
  if q=advance then cur_val:=cur_val+eqtb[l].int;
  end
else  begin scan_glue(p);
  if q=advance then @<Compute the sum of two glue specs@>;
  end

@ @<Compute the sum of two glue specs@>=
begin q:=new_spec(cur_val); r:=equiv(l);
delete_glue_ref(cur_val);
width(q):=width(q)+width(r);
if stretch(q)=0 then stretch_order(q):=normal;
if stretch_order(q)=stretch_order(r) then stretch(q):=stretch(q)+stretch(r)
else if (stretch_order(q)<stretch_order(r))and(stretch(r)<>0) then
  begin stretch(q):=stretch(r); stretch_order(q):=stretch_order(r);
  end;
if shrink(q)=0 then shrink_order(q):=normal;
if shrink_order(q)=shrink_order(r) then shrink(q):=shrink(q)+shrink(r)
else if (shrink_order(q)<shrink_order(r))and(shrink(r)<>0) then
  begin shrink(q):=shrink(r); shrink_order(q):=shrink_order(r);
  end;
cur_val:=q;
end

@ @<Compute result of |multiply| or |divide|...@>=
begin scan_int;
if p<glue_val then
  if q=multiply then
    if p=int_val then cur_val:=mult_integers(eqtb[l].int,cur_val)
    else cur_val:=nx_plus_y(eqtb[l].int,cur_val,0)
  else cur_val:=x_over_n(eqtb[l].int,cur_val)
else  begin s:=equiv(l); r:=new_spec(s);
  if q=multiply then
    begin width(r):=nx_plus_y(width(s),cur_val,0);
    stretch(r):=nx_plus_y(stretch(s),cur_val,0);
    shrink(r):=nx_plus_y(shrink(s),cur_val,0);
    end
  else  begin width(r):=x_over_n(width(s),cur_val);
    stretch(r):=x_over_n(stretch(s),cur_val);
    shrink(r):=x_over_n(shrink(s),cur_val);
    end;
  cur_val:=r;
  end;
end

@ The processing of boxes is somewhat different, because we may need
to scan and create an entire box before we actually change the value of the old
one.

@<Assignments@>=
set_box: begin scan_eight_bit_int;
  if global then n:=256+cur_val@+else n:=cur_val;
  scan_optional_equals;
  if set_box_allowed then scan_box(box_flag+n)
  else begin print_err("Improper "); print_esc("setbox");
@.Improper \\setbox@>
    help2("Sorry, \setbox is not allowed after \halign in a display,")@/
    ("or between \accent and an accented character."); error;
    end;
  end;

@ The |space_factor| or |prev_depth| settings are changed when a |set_aux|
command is sensed. Similarly, |prev_graf| is changed in the presence of
|set_prev_graf|, and |dead_cycles| or |insert_penalties| in the presence of
|set_page_int|. These definitions are always global.

When some dimension of a box register is changed, the change isn't exactly
global; but \TeX\ does not look at the \.{\\global} switch.

@<Assignments@>=
set_aux:alter_aux;
set_prev_graf:alter_prev_graf;
set_page_dimen:alter_page_so_far;
set_page_int:alter_integer;
set_box_dimen:alter_box_dimen;

@ @<Declare subprocedures for |prefixed_command|@>=
procedure alter_aux;
var c:halfword; {|hmode| or |vmode|}
begin if cur_chr<>abs(mode) then report_illegal_case
else  begin c:=cur_chr; scan_optional_equals;
  if c=vmode then
    begin scan_normal_dimen; prev_depth:=cur_val;
    end
  else  begin scan_int;
    if (cur_val<=0)or(cur_val>32767) then
      begin print_err("Bad space factor");
@.Bad space factor@>
      help1("I allow only values in the range 1..32767 here.");
      int_error(cur_val);
      end
    else space_factor:=cur_val;
    end;
  end;
end;

@ @<Declare subprocedures for |prefixed_command|@>=
procedure alter_prev_graf;
var p:0..nest_size; {index into |nest|}
begin nest[nest_ptr]:=cur_list; p:=nest_ptr;
while abs(nest[p].mode_field)<>vmode do decr(p);
scan_optional_equals; scan_int;
if cur_val<0 then
  begin print_err("Bad "); print_esc("prevgraf");
@.Bad \\prevgraf@>
  help1("I allow only nonnegative values here.");
  int_error(cur_val);
  end
else  begin nest[p].pg_field:=cur_val; cur_list:=nest[nest_ptr];
  end;
end;

@ @<Declare subprocedures for |prefixed_command|@>=
procedure alter_page_so_far;
var c:0..7; {index into |page_so_far|}
begin c:=cur_chr; scan_optional_equals; scan_normal_dimen;
page_so_far[c]:=cur_val;
end;

@ @<Declare subprocedures for |prefixed_command|@>=
procedure alter_integer;
var c:0..1; {0 for \.{\\deadcycles}, 1 for \.{\\insertpenalties}}
begin c:=cur_chr; scan_optional_equals; scan_int;
if c=0 then dead_cycles:=cur_val
else insert_penalties:=cur_val;
end;

@ @<Declare subprocedures for |prefixed_command|@>=
procedure alter_box_dimen;
var c:small_number; {|width_offset| or |height_offset| or |depth_offset|}
@!b:eight_bits; {box number}
begin c:=cur_chr; scan_eight_bit_int; b:=cur_val; scan_optional_equals;
scan_normal_dimen;
if box(b)<>null then mem[box(b)+c].sc:=cur_val;
end;

@ Paragraph shapes are set up in the obvious way.

@<Assignments@>=
set_shape: begin scan_optional_equals; scan_int; n:=cur_val;
  if n<=0 then p:=null
  else  begin p:=get_node(2*n+1); info(p):=n;
    for j:=1 to n do
      begin scan_normal_dimen;
      mem[p+2*j-1].sc:=cur_val; {indentation}
      scan_normal_dimen;
      mem[p+2*j].sc:=cur_val; {width}
      end;
    end;
  define(par_shape_loc,shape_ref,p);
  end;

@ Here's something that isn't quite so obvious. It guarantees that
|info(par_shape_ptr)| can hold any positive~|n| for which |get_node(2*n+1)|
doesn't overflow the memory capacity.

@<Check the ``constant''...@>=
if 2*max_halfword<mem_top-mem_min then bad:=41;

@ New hyphenation data is loaded by the |hyph_data| command.

@<Put each...@>=
primitive("hyphenation",hyph_data,0);
@!@:hyphenation_}{\.{\\hyphenation} primitive@>
primitive("patterns",hyph_data,1);
@!@:patterns_}{\.{\\patterns} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
hyph_data: if chr_code=1 then print_esc("patterns")
  else print_esc("hyphenation");

@ @<Assignments@>=
hyph_data: if cur_chr=1 then
    begin @!init new_patterns; goto done;@;@+tini@/
    print_err("Patterns can be loaded only by INITEX");
@.Patterns can be...@>
    help0; error;
    repeat get_token; until cur_cmd=right_brace; {flush the patterns}
    return;
    end
  else  begin new_hyph_exceptions; goto done;
    end;

@ All of \TeX's parameters are kept in |eqtb| except the font information,
the interaction mode, and the hyphenation tables; these are strictly global.

@<Assignments@>=
assign_font_dimen: begin find_font_dimen(true); k:=cur_val;
  scan_optional_equals; scan_normal_dimen; font_info[k].sc:=cur_val;
  end;
assign_font_int: begin n:=cur_chr; scan_font_ident; f:=cur_val;
  scan_optional_equals; scan_int;
  if n=0 then hyphen_char[f]:=cur_val@+else skew_char[f]:=cur_val;
  end;

@ @<Put each...@>=
primitive("hyphenchar",assign_font_int,0);
@!@:hyphen_char_}{\.{\\hyphenchar} primitive@>
primitive("skewchar",assign_font_int,1);
@!@:skew_char_}{\.{\\skewchar} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
assign_font_int: if chr_code=0 then print_esc("hyphenchar")
  else print_esc("skewchar");

@ Here is where the information for a new font gets loaded.

@<Assignments@>=
def_font: new_font(a);

@ @<Declare subprocedures for |prefixed_command|@>=
procedure new_font(@!a:small_number);
label common_ending;
var u:pointer; {user's font identifier}
@!s:scaled; {stated ``at'' size, or negative of scaled magnification}
@!f:internal_font_number; {runs through existing fonts}
@!t:str_number; {name for the frozen font identifier}
@!old_setting:0..max_selector; {holds |selector| setting}
@!flushable_string:str_number; {string not yet referenced}
begin if job_name=0 then open_log_file;
  {avoid confusing \.{texput} with the font name}
@.texput@>
get_r_token; u:=cur_cs;
if u>=hash_base then t:=text(u)
else if u>=single_base then
  if u=null_cs then t:="FONT"@+else t:=u-single_base
else  begin old_setting:=selector; selector:=new_string;
  print("FONT"); print(u-active_base); selector:=old_setting;
@.FONTx@>
  str_room(1); t:=make_string;
  end;
define(u,set_font,null_font); scan_optional_equals; scan_file_name;
@<Scan the font size specification@>;
@<If this font has already been loaded, set |f| to the internal
  font number and |goto common_ending|@>;
f:=read_font_info(u,cur_name,cur_area,s);
common_ending: equiv(u):=f; eqtb[font_id_base+f]:=eqtb[u]; font_id_text(f):=t;
end;

@ @<Scan the font size specification@>=
name_in_progress:=true; {this keeps |cur_name| from being changed}
if scan_keyword("at") then @<Put the \(p)(positive) `at' size into |s|@>
@.at@>
else if scan_keyword("scaled") then
@.scaled@>
  begin scan_int; s:=-cur_val;
  if (cur_val<=0)or(cur_val>32768) then
    begin print_err("Illegal magnification has been changed to 1000");@/
@.Illegal magnification...@>
    help1("The magnification ratio must be between 1 and 32768.");
    int_error(cur_val); s:=-1000;
    end;
  end
else s:=-1000;
name_in_progress:=false

@ @<Put the \(p)(positive) `at' size into |s|@>=
begin scan_normal_dimen; s:=cur_val;
if (s<=0)or(s>=@'1000000000) then
  begin print_err("Improper `at' size (");
  print_scaled(s); print("pt), replaced by 10pt");
@.Improper `at' size...@>
  help2("I can only handle fonts at positive sizes that are")@/
  ("less than 2048pt, so I've changed what you said to 10pt.");
  error; s:=10*unity;
  end;
end

@ When the user gives a new identifier to a font that was previously loaded,
the new name becomes the font identifier of record. Font names `\.{xyz}' and
`\.{XYZ}' are considered to be different.

@<If this font has already been loaded...@>=
flushable_string:=str_ptr-1;
for f:=font_base+1 to font_ptr do
  if str_eq_str(font_name[f],cur_name)and str_eq_str(font_area[f],cur_area) then
    begin if cur_name=flushable_string then
      begin flush_string; cur_name:=font_name[f];
      end;
    if s>0 then
      begin if s=font_size[f] then goto common_ending;
      end
    else if font_size[f]=xn_over_d(font_dsize[f],-s,1000) then
      goto common_ending;
    end

@ @<Cases of |print_cmd_chr|...@>=
set_font:begin print("select font "); slow_print(font_name[chr_code]);
  if font_size[chr_code]<>font_dsize[chr_code] then
    begin print(" at "); print_scaled(font_size[chr_code]);
    print("pt");
    end;
  end;

@ @<Put each...@>=
primitive("batchmode",set_interaction,batch_mode);
@!@:batch_mode_}{\.{\\batchmode} primitive@>
primitive("nonstopmode",set_interaction,nonstop_mode);
@!@:nonstop_mode_}{\.{\\nonstopmode} primitive@>
primitive("scrollmode",set_interaction,scroll_mode);
@!@:scroll_mode_}{\.{\\scrollmode} primitive@>
primitive("errorstopmode",set_interaction,error_stop_mode);
@!@:error_stop_mode_}{\.{\\errorstopmode} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
set_interaction: case chr_code of
  batch_mode: print_esc("batchmode");
  nonstop_mode: print_esc("nonstopmode");
  scroll_mode: print_esc("scrollmode");
  othercases print_esc("errorstopmode")
  endcases;

@ @<Assignments@>=
set_interaction: new_interaction;

@ @<Declare subprocedures for |prefixed_command|@>=
procedure new_interaction;
begin print_ln;
interaction:=cur_chr;
@<Initialize the print |selector| based on |interaction|@>;
if log_opened then selector:=selector+2;
end;

@ The \.{\\afterassignment} command puts a token into the global
variable |after_token|. This global variable is examined just after
every assignment has been performed.

@<Glob...@>=
@!after_token:halfword; {zero, or a saved token}

@ @<Set init...@>=
after_token:=0;

@ @<Cases of |main_control| that don't...@>=
any_mode(after_assignment):begin get_token; after_token:=cur_tok;
  end;

@ @<Insert a token saved by \.{\\afterassignment}, if any@>=
if after_token<>0 then
  begin cur_tok:=after_token; back_input; after_token:=0;
  end

@ Here is a procedure that might be called `Get the next non-blank non-relax
non-call non-assignment token'.

@<Declare act...@>=
procedure do_assignments;
label exit;
begin loop begin @<Get the next non-blank non-relax...@>;
  if cur_cmd<=max_non_prefixed_command then return;
  set_box_allowed:=false; prefixed_command; set_box_allowed:=true;
  end;
exit:end;

@ @<Cases of |main_control| that don't...@>=
any_mode(after_group):begin get_token; save_for_after(cur_tok);
  end;

@ Files for \.{\\read} are opened and closed by the |in_stream| command.

@<Put each...@>=
primitive("openin",in_stream,1);
@!@:open_in_}{\.{\\openin} primitive@>
primitive("closein",in_stream,0);
@!@:close_in_}{\.{\\closein} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
in_stream: if chr_code=0 then print_esc("closein")
  else print_esc("openin");

@ @<Cases of |main_control| that don't...@>=
any_mode(in_stream): open_or_close_in;

@ @<Declare act...@>=
procedure open_or_close_in;
var c:0..1; {1 for \.{\\openin}, 0 for \.{\\closein}}
@!n:0..15; {stream number}
begin c:=cur_chr; scan_four_bit_int; n:=cur_val;
if read_open[n]<>closed then
  begin a_close(read_file[n]); read_open[n]:=closed;
  end;
if c<>0 then
  begin scan_optional_equals; scan_file_name;
  if cur_ext="" then cur_ext:=".tex";
  pack_cur_name;
  if a_open_in(read_file[n]) then read_open[n]:=just_open;
  end;
end;

@ The user can issue messages to the terminal, regardless of the
current mode.

@<Cases of |main_control| that don't...@>=
any_mode(message):issue_message;

@ @<Put each...@>=
primitive("message",message,0);
@!@:message_}{\.{\\message} primitive@>
primitive("errmessage",message,1);
@!@:err_message_}{\.{\\errmessage} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
message: if chr_code=0 then print_esc("message")
  else print_esc("errmessage");

@ @<Declare act...@>=
procedure issue_message;
var old_setting:0..max_selector; {holds |selector| setting}
@!c:0..1; {identifies \.{\\message} and \.{\\errmessage}}
@!s:str_number; {the message}
begin c:=cur_chr; link(garbage):=scan_toks(false,true);
old_setting:=selector; selector:=new_string;
token_show(def_ref); selector:=old_setting;
flush_list(def_ref);
str_room(1); s:=make_string;
if c=0 then @<Print string |s| on the terminal@>
else @<Print string |s| as an error message@>;
flush_string;
end;

@ @<Print string |s| on the terminal@>=
begin if term_offset+length(s)>max_print_line-2 then print_ln
else if (term_offset>0)or(file_offset>0) then print_char(" ");
slow_print(s); update_terminal;
end

@ If \.{\\errmessage} occurs often in |scroll_mode|, without user-defined
\.{\\errhelp}, we don't want to give a long help message each time. So we
give a verbose explanation only once.

@<Glob...@>=
@!long_help_seen:boolean; {has the long \.{\\errmessage} help been used?}

@ @<Set init...@>=long_help_seen:=false;

@ @<Print string |s| as an error message@>=
begin print_err(""); slow_print(s);
if err_help<>null then use_err_help:=true
else if long_help_seen then help1("(That was another \errmessage.)")
else  begin if interaction<error_stop_mode then long_help_seen:=true;
  help4("This error message was generated by an \errmessage")@/
  ("command, so I can't give any explicit help.")@/
  ("Pretend that you're Hercule Poirot: Examine all clues,")@/
@^Poirot, Hercule@>
  ("and deduce the truth by order and method.");
  end;
error; use_err_help:=false;
end

@ The |error| routine calls on |give_err_help| if help is requested from
the |err_help| parameter.

@p procedure give_err_help;
begin token_show(err_help);
end;

@ The \.{\\uppercase} and \.{\\lowercase} commands are implemented by
building a token list and then changing the cases of the letters in it.

@<Cases of |main_control| that don't...@>=
any_mode(case_shift):shift_case;

@ @<Put each...@>=
primitive("lowercase",case_shift,lc_code_base);
@!@:lowercase_}{\.{\\lowercase} primitive@>
primitive("uppercase",case_shift,uc_code_base);
@!@:uppercase_}{\.{\\uppercase} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
case_shift:if chr_code=lc_code_base then print_esc("lowercase")
  else print_esc("uppercase");

@ @<Declare act...@>=
procedure shift_case;
var b:pointer; {|lc_code_base| or |uc_code_base|}
@!p:pointer; {runs through the token list}
@!t:halfword; {token}
@!c:eight_bits; {character code}
begin b:=cur_chr; p:=scan_toks(false,false); p:=link(def_ref);
while p<>null do
  begin @<Change the case of the token in |p|, if a change is appropriate@>;
  p:=link(p);
  end;
back_list(link(def_ref)); free_avail(def_ref); {omit reference count}
end;

@ When the case of a |chr_code| changes, we don't change the |cmd|.
We also change active characters, using the fact that
|cs_token_flag+active_base| is a multiple of~256.
@^data structure assumptions@>

@<Change the case of the token in |p|, if a change is appropriate@>=
t:=info(p);
if t<cs_token_flag+single_base then
  begin c:=t mod 256;
  if equiv(b+c)<>0 then info(p):=t-c+equiv(b+c);
  end

@ We come finally to the last pieces missing from |main_control|, namely the
`\.{\\show}' commands that are useful when debugging.

@<Cases of |main_control| that don't...@>=
any_mode(xray): show_whatever;

@ @d show_code=0 { \.{\\show} }
@d show_box_code=1 { \.{\\showbox} }
@d show_the_code=2 { \.{\\showthe} }
@d show_lists=3 { \.{\\showlists} }

@<Put each...@>=
primitive("show",xray,show_code);
@!@:show_}{\.{\\show} primitive@>
primitive("showbox",xray,show_box_code);
@!@:show_box_}{\.{\\showbox} primitive@>
primitive("showthe",xray,show_the_code);
@!@:show_the_}{\.{\\showthe} primitive@>
primitive("showlists",xray,show_lists);
@!@:show_lists_}{\.{\\showlists} primitive@>

@ @<Cases of |print_cmd_chr|...@>=
xray: case chr_code of
  show_box_code:print_esc("showbox");
  show_the_code:print_esc("showthe");
  show_lists:print_esc("showlists");
  othercases print_esc("show")
  endcases;

@ @<Declare act...@>=
procedure show_whatever;
label common_ending;
var p:pointer; {tail of a token list to show}
begin case cur_chr of
show_lists: begin begin_diagnostic; show_activities;
  end;
show_box_code: @<Show the current contents of a box@>;
show_code: @<Show the current meaning of a token, then |goto common_ending|@>;
othercases @<Show the current value of some parameter or register,
  then |goto common_ending|@>
endcases;@/
@<Complete a potentially long \.{\\show} command@>;
common_ending: if interaction<error_stop_mode then
  begin help0; decr(error_count);
  end
else if tracing_online>0 then
  begin@t@>@;@/
  help3("This isn't an error message; I'm just \showing something.")@/
  ("Type `I\show...' to show more (e.g., \show\cs,")@/
  ("\showthe\count10, \showbox255, \showlists).");
  end
else  begin@t@>@;@/
  help5("This isn't an error message; I'm just \showing something.")@/
  ("Type `I\show...' to show more (e.g., \show\cs,")@/
  ("\showthe\count10, \showbox255, \showlists).")@/
  ("And type `I\tracingonline=1\show...' to show boxes and")@/
  ("lists on your terminal as well as in the transcript file.");
  end;
error;
end;

@ @<Show the current meaning of a token...@>=
begin get_token;
if interaction=error_stop_mode then wake_up_terminal;
print_nl("> ");
if cur_cs<>0 then
  begin sprint_cs(cur_cs); print_char("=");
  end;
print_meaning; goto common_ending;
end

@ @<Cases of |print_cmd_chr|...@>=
undefined_cs: print("undefined");
call: print("macro");
long_call: print_esc("long macro");
outer_call: print_esc("outer macro");
long_outer_call: begin print_esc("long"); print_esc("outer macro");
  end;
end_template: print_esc("outer endtemplate");

@ @<Show the current contents of a box@>=
begin scan_eight_bit_int; begin_diagnostic;
print_nl("> \box"); print_int(cur_val); print_char("=");
if box(cur_val)=null then print("void")
else show_box(box(cur_val));
end

@ @<Show the current value of some parameter...@>=
begin p:=the_toks;
if interaction=error_stop_mode then wake_up_terminal;
print_nl("> "); token_show(temp_head);
flush_list(link(temp_head)); goto common_ending;
end

@ @<Complete a potentially long \.{\\show} command@>=
end_diagnostic(true); print_err("OK");
@.OK@>
if selector=term_and_log then if tracing_online<=0 then
  begin selector:=term_only; print(" (see the transcript file)");
  selector:=term_and_log;
  end

@* \[50] Dumping and undumping the tables.
After \.{INITEX} has seen a collection of fonts and macros, it
can write all the necessary information on an auxiliary file so
that production versions of \TeX\ are able to initialize their
memory at high speed. The present section of the program takes
care of such output and input. We shall consider simultaneously
the processes of storing and restoring,
so that the inverse relation between them is clear.
@.INITEX@>

The global variable |format_ident| is a string that is printed right
after the |banner| line when \TeX\ is ready to start. For \.{INITEX} this
string says simply `\.{(INITEX)}'; for other versions of \TeX\ it says,
for example, `\.{(preloaded format=plain 82.11.19)}', showing the year,
month, and day that the format file was created. We have |format_ident=0|
before \TeX's tables are loaded.

@<Glob...@>=
@!format_ident:str_number;

@ @<Set init...@>=
format_ident:=0;

@ @<Initialize table entries...@>=
format_ident:=" (INITEX)";

@ @<Declare act...@>=
@!init procedure store_fmt_file;
label found1,found2,done1,done2;
var j,@!k,@!l:integer; {all-purpose indices}
@!p,@!q: pointer; {all-purpose pointers}
@!x: integer; {something to dump}
@!w: four_quarters; {four ASCII codes}
begin @<If dumping is not allowed, abort@>;
@<Create the |format_ident|, open the format file,
  and inform the user that dumping has begun@>;
@<Dump constants for consistency check@>;
@<Dump the string pool@>;
@<Dump the dynamic memory@>;
@<Dump the table of equivalents@>;
@<Dump the font information@>;
@<Dump the hyphenation tables@>;
@<Dump a couple more things and the closing check word@>;
@<Close the format file@>;
end;
tini

@ Corresponding to the procedure that dumps a format file, we have a function
that reads one in. The function returns |false| if the dumped format is
incompatible with the present \TeX\ table sizes, etc.

@d bad_fmt=6666 {go here if the format file is unacceptable}
@d too_small(#)==begin wake_up_terminal;
  wterm_ln('---! Must increase the ',#);
@.Must increase the x@>
  goto bad_fmt;
  end

@p @t\4@>@<Declare the function called |open_fmt_file|@>@;
function load_fmt_file:boolean;
label bad_fmt,exit;
var j,@!k:integer; {all-purpose indices}
@!p,@!q: pointer; {all-purpose pointers}
@!x: integer; {something undumped}
@!w: four_quarters; {four ASCII codes}
begin @<Undump constants for consistency check@>;
@<Undump the string pool@>;
@<Undump the dynamic memory@>;
@<Undump the table of equivalents@>;
@<Undump the font information@>;
@<Undump the hyphenation tables@>;
@<Undump a couple more things and the closing check word@>;
load_fmt_file:=true; return; {it worked!}
bad_fmt: wake_up_terminal;
  wterm_ln('(Fatal format file error; I''m stymied)');
@.Fatal format file error@>
load_fmt_file:=false;
exit:end;

@ The user is not allowed to dump a format file unless |save_ptr=0|.
This condition implies that |cur_level=level_one|, hence
the |xeq_level| array is constant and it need not be dumped.

@<If dumping is not allowed, abort@>=
if save_ptr<>0 then
  begin print_err("You can't dump inside a group");
@.You can't dump...@>
  help1("`{...\dump}' is a no-no."); succumb;
  end

@ Format files consist of |memory_word| items, and we use the following
macros to dump words of different types:

@d dump_wd(#)==begin fmt_file^:=#; put(fmt_file);@+end
@d dump_int(#)==begin fmt_file^.int:=#; put(fmt_file);@+end
@d dump_hh(#)==begin fmt_file^.hh:=#; put(fmt_file);@+end
@d dump_qqqq(#)==begin fmt_file^.qqqq:=#; put(fmt_file);@+end

@<Glob...@>=
@!fmt_file:word_file; {for input or output of format information}

@ The inverse macros are slightly more complicated, since we need to check
the range of the values we are reading in. We say `|undump(a)(b)(x)|' to
read an integer value |x| that is supposed to be in the range |a<=x<=b|.

@d undump_wd(#)==begin get(fmt_file); #:=fmt_file^;@+end
@d undump_int(#)==begin get(fmt_file); #:=fmt_file^.int;@+end
@d undump_hh(#)==begin get(fmt_file); #:=fmt_file^.hh;@+end
@d undump_qqqq(#)==begin get(fmt_file); #:=fmt_file^.qqqq;@+end
@d undump_end_end(#)==#:=x;@+end
@d undump_end(#)==(x>#) then goto bad_fmt@+else undump_end_end
@d undump(#)==begin undump_int(x); if (x<#) or undump_end
@d undump_size_end_end(#)==too_small(#)@+else undump_end_end
@d undump_size_end(#)==if x># then undump_size_end_end
@d undump_size(#)==begin undump_int(x);
  if x<# then goto bad_fmt; undump_size_end

@ The next few sections of the program should make it clear how we use the
dump/undump macros.

@<Dump constants for consistency check@>=
dump_int(@$);@/
dump_int(mem_bot);@/
dump_int(mem_top);@/
dump_int(eqtb_size);@/
dump_int(hash_prime);@/
dump_int(hyph_size)

@ Sections of a \.{WEB} program that are ``commented out'' still contribute
strings to the string pool; therefore \.{INITEX} and \TeX\ will have
the same strings. (And it is, of course, a good thing that they do.)
@.WEB@>
@^string pool@>

@<Undump constants for consistency check@>=
x:=fmt_file^.int;
if x<>@$ then goto bad_fmt; {check that strings are the same}
undump_int(x);
if x<>mem_bot then goto bad_fmt;
undump_int(x);
if x<>mem_top then goto bad_fmt;
undump_int(x);
if x<>eqtb_size then goto bad_fmt;
undump_int(x);
if x<>hash_prime then goto bad_fmt;
undump_int(x);
if x<>hyph_size then goto bad_fmt

@ @d dump_four_ASCII==
  w.b0:=qi(so(str_pool[k])); w.b1:=qi(so(str_pool[k+1]));
  w.b2:=qi(so(str_pool[k+2])); w.b3:=qi(so(str_pool[k+3]));
  dump_qqqq(w)

@<Dump the string pool@>=
dump_int(pool_ptr);
dump_int(str_ptr);
for k:=0 to str_ptr do dump_int(str_start[k]);
k:=0;
while k+4<pool_ptr do
  begin dump_four_ASCII; k:=k+4;
  end;
k:=pool_ptr-4; dump_four_ASCII;
print_ln; print_int(str_ptr); print(" strings of total length ");
print_int(pool_ptr)

@ @d undump_four_ASCII==
  undump_qqqq(w);
  str_pool[k]:=si(qo(w.b0)); str_pool[k+1]:=si(qo(w.b1));
  str_pool[k+2]:=si(qo(w.b2)); str_pool[k+3]:=si(qo(w.b3))

@<Undump the string pool@>=
undump_size(0)(pool_size)('string pool size')(pool_ptr);
undump_size(0)(max_strings)('max strings')(str_ptr);
for k:=0 to str_ptr do undump(0)(pool_ptr)(str_start[k]);
k:=0;
while k+4<pool_ptr do
  begin undump_four_ASCII; k:=k+4;
  end;
k:=pool_ptr-4; undump_four_ASCII;
init_str_ptr:=str_ptr; init_pool_ptr:=pool_ptr

@ By sorting the list of available spaces in the variable-size portion of
|mem|, we are usually able to get by without having to dump very much
of the dynamic memory.

We recompute |var_used| and |dyn_used|, so that \.{INITEX} dumps valid
information even when it has not been gathering statistics.

@<Dump the dynamic memory@>=
sort_avail; var_used:=0;
dump_int(lo_mem_max); dump_int(rover);
p:=mem_bot; q:=rover; x:=0;
repeat for k:=p to q+1 do dump_wd(mem[k]);
x:=x+q+2-p; var_used:=var_used+q-p;
p:=q+node_size(q); q:=rlink(q);
until q=rover;
var_used:=var_used+lo_mem_max-p; dyn_used:=mem_end+1-hi_mem_min;@/
for k:=p to lo_mem_max do dump_wd(mem[k]);
x:=x+lo_mem_max+1-p;
dump_int(hi_mem_min); dump_int(avail);
for k:=hi_mem_min to mem_end do dump_wd(mem[k]);
x:=x+mem_end+1-hi_mem_min;
p:=avail;
while p<>null do
  begin decr(dyn_used); p:=link(p);
  end;
dump_int(var_used); dump_int(dyn_used);
print_ln; print_int(x);
print(" memory locations dumped; current usage is ");
print_int(var_used); print_char("&"); print_int(dyn_used)

@ @<Undump the dynamic memory@>=
undump(lo_mem_stat_max+1000)(hi_mem_stat_min-1)(lo_mem_max);
undump(lo_mem_stat_max+1)(lo_mem_max)(rover);
p:=mem_bot; q:=rover;
repeat for k:=p to q+1 do undump_wd(mem[k]);
p:=q+node_size(q);
if (p>lo_mem_max)or((q>=rlink(q))and(rlink(q)<>rover)) then goto bad_fmt;
q:=rlink(q);
until q=rover;
for k:=p to lo_mem_max do undump_wd(mem[k]);
if mem_min<mem_bot-2 then {make more low memory available}
  begin p:=llink(rover); q:=mem_min+1;
  link(mem_min):=null; info(mem_min):=null; {we don't use the bottom word}
  rlink(p):=q; llink(rover):=q;@/
  rlink(q):=rover; llink(q):=p; link(q):=empty_flag;
  node_size(q):=mem_bot-q;
  end;
undump(lo_mem_max+1)(hi_mem_stat_min)(hi_mem_min);
undump(null)(mem_top)(avail); mem_end:=mem_top;
for k:=hi_mem_min to mem_end do undump_wd(mem[k]);
undump_int(var_used); undump_int(dyn_used)

@ @<Dump the table of equivalents@>=
@<Dump regions 1 to 4 of |eqtb|@>;
@<Dump regions 5 and 6 of |eqtb|@>;
dump_int(par_loc); dump_int(write_loc);@/
@<Dump the hash table@>

@ @<Undump the table of equivalents@>=
@<Undump regions 1 to 6 of |eqtb|@>;
undump(hash_base)(frozen_control_sequence)(par_loc);
par_token:=cs_token_flag+par_loc;@/
undump(hash_base)(frozen_control_sequence)(write_loc);@/
@<Undump the hash table@>

@ The table of equivalents usually contains repeated information, so we dump it
in compressed form: The sequence of $n+2$ values $(n,x_1,\ldots,x_n,m)$ in the
format file represents $n+m$ consecutive entries of |eqtb|, with |m| extra
copies of $x_n$, namely $(x_1,\ldots,x_n,x_n,\ldots,x_n)$.

@<Dump regions 1 to 4 of |eqtb|@>=
k:=active_base;
repeat j:=k;
while j<int_base-1 do
  begin if (equiv(j)=equiv(j+1))and(eq_type(j)=eq_type(j+1))and@|
    (eq_level(j)=eq_level(j+1)) then goto found1;
  incr(j);
  end;
l:=int_base; goto done1; {|j=int_base-1|}
found1: incr(j); l:=j;
while j<int_base-1 do
  begin if (equiv(j)<>equiv(j+1))or(eq_type(j)<>eq_type(j+1))or@|
    (eq_level(j)<>eq_level(j+1)) then goto done1;
  incr(j);
  end;
done1:dump_int(l-k);
while k<l do
  begin dump_wd(eqtb[k]); incr(k);
  end;
k:=j+1; dump_int(k-l);
until k=int_base

@ @<Dump regions 5 and 6 of |eqtb|@>=
repeat j:=k;
while j<eqtb_size do
  begin if eqtb[j].int=eqtb[j+1].int then goto found2;
  incr(j);
  end;
l:=eqtb_size+1; goto done2; {|j=eqtb_size|}
found2: incr(j); l:=j;
while j<eqtb_size do
  begin if eqtb[j].int<>eqtb[j+1].int then goto done2;
  incr(j);
  end;
done2:dump_int(l-k);
while k<l do
  begin dump_wd(eqtb[k]); incr(k);
  end;
k:=j+1; dump_int(k-l);
until k>eqtb_size

@ @<Undump regions 1 to 6 of |eqtb|@>=
k:=active_base;
repeat undump_int(x);
if (x<1)or(k+x>eqtb_size+1) then goto bad_fmt;
for j:=k to k+x-1 do undump_wd(eqtb[j]);
k:=k+x;
undump_int(x);
if (x<0)or(k+x>eqtb_size+1) then goto bad_fmt;
for j:=k to k+x-1 do eqtb[j]:=eqtb[k-1];
k:=k+x;
until k>eqtb_size

@ A different scheme is used to compress the hash table, since its lower
region is usually sparse. When |text(p)<>0| for |p<=hash_used|, we output
two words, |p| and |hash[p]|. The hash table is, of course, densely packed
for |p>=hash_used|, so the remaining entries are output in a~block.

@<Dump the hash table@>=
dump_int(hash_used); cs_count:=frozen_control_sequence-1-hash_used;
for p:=hash_base to hash_used do if text(p)<>0 then
  begin dump_int(p); dump_hh(hash[p]); incr(cs_count);
  end;
for p:=hash_used+1 to undefined_control_sequence-1 do dump_hh(hash[p]);
dump_int(cs_count);@/
print_ln; print_int(cs_count); print(" multiletter control sequences")

@ @<Undump the hash table@>=
undump(hash_base)(frozen_control_sequence)(hash_used); p:=hash_base-1;
repeat undump(p+1)(hash_used)(p); undump_hh(hash[p]);
until p=hash_used;
for p:=hash_used+1 to undefined_control_sequence-1 do undump_hh(hash[p]);
undump_int(cs_count)

@ @<Dump the font information@>=
dump_int(fmem_ptr);
for k:=0 to fmem_ptr-1 do dump_wd(font_info[k]);
dump_int(font_ptr);
for k:=null_font to font_ptr do
  @<Dump the array info for internal font number |k|@>;
print_ln; print_int(fmem_ptr-7); print(" words of font info for ");
print_int(font_ptr-font_base); print(" preloaded font");
if font_ptr<>font_base+1 then print_char("s")

@ @<Undump the font information@>=
undump_size(7)(font_mem_size)('font mem size')(fmem_ptr);
for k:=0 to fmem_ptr-1 do undump_wd(font_info[k]);
undump_size(font_base)(font_max)('font max')(font_ptr);
for k:=null_font to font_ptr do
  @<Undump the array info for internal font number |k|@>

@ @<Dump the array info for internal font number |k|@>=
begin dump_qqqq(font_check[k]);
dump_int(font_size[k]);
dump_int(font_dsize[k]);
dump_int(font_params[k]);@/
dump_int(hyphen_char[k]);
dump_int(skew_char[k]);@/
dump_int(font_name[k]);
dump_int(font_area[k]);@/
dump_int(font_bc[k]);
dump_int(font_ec[k]);@/
dump_int(char_base[k]);
dump_int(width_base[k]);
dump_int(height_base[k]);@/
dump_int(depth_base[k]);
dump_int(italic_base[k]);
dump_int(lig_kern_base[k]);@/
dump_int(kern_base[k]);
dump_int(exten_base[k]);
dump_int(param_base[k]);@/
dump_int(font_glue[k]);@/
dump_int(bchar_label[k]);
dump_int(font_bchar[k]);
dump_int(font_false_bchar[k]);@/
print_nl("\font"); print_esc(font_id_text(k)); print_char("=");
print_file_name(font_name[k],font_area[k],"");
if font_size[k]<>font_dsize[k] then
  begin print(" at "); print_scaled(font_size[k]); print("pt");
  end;
end

@ @<Undump the array info for internal font number |k|@>=
begin undump_qqqq(font_check[k]);@/
undump_int(font_size[k]);
undump_int(font_dsize[k]);
undump(min_halfword)(max_halfword)(font_params[k]);@/
undump_int(hyphen_char[k]);
undump_int(skew_char[k]);@/
undump(0)(str_ptr)(font_name[k]);
undump(0)(str_ptr)(font_area[k]);@/
undump(0)(255)(font_bc[k]);
undump(0)(255)(font_ec[k]);@/
undump_int(char_base[k]);
undump_int(width_base[k]);
undump_int(height_base[k]);@/
undump_int(depth_base[k]);
undump_int(italic_base[k]);
undump_int(lig_kern_base[k]);@/
undump_int(kern_base[k]);
undump_int(exten_base[k]);
undump_int(param_base[k]);@/
undump(min_halfword)(lo_mem_max)(font_glue[k]);@/
undump(0)(fmem_ptr-1)(bchar_label[k]);
undump(min_quarterword)(non_char)(font_bchar[k]);
undump(min_quarterword)(non_char)(font_false_bchar[k]);
end

@ @<Dump the hyphenation tables@>=
dump_int(hyph_count);
for k:=0 to hyph_size do if hyph_word[k]<>0 then
  begin dump_int(k); dump_int(hyph_word[k]); dump_int(hyph_list[k]);
  end;
print_ln; print_int(hyph_count); print(" hyphenation exception");
if hyph_count<>1 then print_char("s");
if trie_not_ready then init_trie;
dump_int(trie_max);
for k:=0 to trie_max do dump_hh(trie[k]);
dump_int(trie_op_ptr);
for k:=1 to trie_op_ptr do
  begin dump_int(hyf_distance[k]);
  dump_int(hyf_num[k]);
  dump_int(hyf_next[k]);
  end;
print_nl("Hyphenation trie of length "); print_int(trie_max);
@.Hyphenation trie...@>
print(" has "); print_int(trie_op_ptr); print(" op");
if trie_op_ptr<>1 then print_char("s");
print(" out of "); print_int(trie_op_size);
for k:=255 downto 0 do if trie_used[k]>min_quarterword then
  begin print_nl("  "); print_int(qo(trie_used[k]));
  print(" for language "); print_int(k);
  dump_int(k); dump_int(qo(trie_used[k]));
  end

@ Only ``nonempty'' parts of |op_start| need to be restored.

@<Undump the hyphenation tables@>=
undump(0)(hyph_size)(hyph_count);
for k:=1 to hyph_count do
  begin undump(0)(hyph_size)(j);
  undump(0)(str_ptr)(hyph_word[j]);
  undump(min_halfword)(max_halfword)(hyph_list[j]);
  end;
undump_size(0)(trie_size)('trie size')(j); @+init trie_max:=j;@+tini
for k:=0 to j do undump_hh(trie[k]);
undump_size(0)(trie_op_size)('trie op size')(j); @+init trie_op_ptr:=j;@+tini
for k:=1 to j do
  begin undump(0)(63)(hyf_distance[k]); {a |small_number|}
  undump(0)(63)(hyf_num[k]);
  undump(min_quarterword)(max_quarterword)(hyf_next[k]);
  end;
init for k:=0 to 255 do trie_used[k]:=min_quarterword;@+tini@;@/
k:=256;
while j>0 do
  begin undump(0)(k-1)(k); undump(1)(j)(x);@+init trie_used[k]:=qi(x);@+tini@;@/
  j:=j-x; op_start[k]:=qo(j);
  end;
@!init trie_not_ready:=false @+tini

@ We have already printed a lot of statistics, so we set |tracing_stats:=0|
to prevent them from appearing again.

@<Dump a couple more things and the closing check word@>=
dump_int(interaction); dump_int(format_ident); dump_int(69069);
tracing_stats:=0

@ @<Undump a couple more things and the closing check word@>=
undump(batch_mode)(error_stop_mode)(interaction);
undump(0)(str_ptr)(format_ident);
undump_int(x);
if (x<>69069)or eof(fmt_file) then goto bad_fmt

@ @<Create the |format_ident|...@>=
selector:=new_string;
print(" (preloaded format="); print(job_name); print_char(" ");
print_int(year); print_char(".");
print_int(month); print_char("."); print_int(day); print_char(")");
if interaction=batch_mode then selector:=log_only
else selector:=term_and_log;
str_room(1);
format_ident:=make_string;
pack_job_name(format_extension);
while not w_open_out(fmt_file) do
  prompt_file_name("format file name",format_extension);
print_nl("Beginning to dump on file ");
@.Beginning to dump...@>
slow_print(w_make_name_string(fmt_file)); flush_string;
print_nl(""); slow_print(format_ident)

@ @<Close the format file@>=
w_close(fmt_file)

@* \[51] The main program.
This is it: the part of \TeX\ that executes all those procedures we have
written.

Well---almost. Let's leave space for a few more routines that we may
have forgotten.

@p @<Last-minute procedures@>

@ We have noted that there are two versions of \TeX82. One, called \.{INITEX},
@.INITEX@>
has to be run first; it initializes everything from scratch, without
reading a format file, and it has the capability of dumping a format file.
The other one is called `\.{VIRTEX}'; it is a ``virgin'' program that needs
@.VIRTEX@>
to input a format file in order to get started. \.{VIRTEX} typically has
more memory capacity than \.{INITEX}, because it does not need the space
consumed by the auxiliary hyphenation tables and the numerous calls on
|primitive|, etc.

The \.{VIRTEX} program cannot read a format file instantaneously, of course;
the best implementations therefore allow for production versions of \TeX\ that
not only avoid the loading routine for \PASCAL\ object code, they also have
a format file pre-loaded. This is impossible to do if we stick to standard
\PASCAL; but there is a simple way to fool many systems into avoiding the
initialization, as follows:\quad(1)~We declare a global integer variable
called |ready_already|. The probability is negligible that this
variable holds any particular value like 314159 when \.{VIRTEX} is first
loaded.\quad(2)~After we have read in a format file and initialized
everything, we set |ready_already:=314159|.\quad(3)~Soon \.{VIRTEX}
will print `\.*', waiting for more input; and at this point we
interrupt the program and save its core image in some form that the
operating system can reload speedily.\quad(4)~When that core image is
activated, the program starts again at the beginning; but now
|ready_already=314159| and all the other global variables have
their initial values too. The former chastity has vanished!

In other words, if we allow ourselves to test the condition
|ready_already=314159|, before |ready_already| has been
assigned a value, we can avoid the lengthy initialization. Dirty tricks
rarely pay off so handsomely.
@^dirty \PASCAL@>
@^system dependencies@>

On systems that allow such preloading, the standard program called \.{TeX}
should be the one that has \.{plain} format preloaded, since that agrees
with {\sl The \TeX book}. Other versions, e.g., \.{AmSTeX}, should also
@:TeXbook}{\sl The \TeX book@>
@.AmSTeX@>
@.plain@>
be provided for commonly used formats.

@<Glob...@>=
@!ready_already:integer; {a sacrifice of purity for economy}

@ Now this is really it: \TeX\ starts and ends here.

The initial test involving |ready_already| should be deleted if the
\PASCAL\ runtime system is smart enough to detect such a ``mistake.''
@^system dependencies@>

@p begin @!{|start_here|}
history:=fatal_error_stop; {in case we quit during initialization}
t_open_out; {open the terminal for output}
if ready_already=314159 then goto start_of_TEX;
@<Check the ``constant'' values...@>@;
if bad>0 then
  begin wterm_ln('Ouch---my internal constants have been clobbered!',
    '---case ',bad:1);
@.Ouch...clobbered@>
  goto final_end;
  end;
initialize; {set global variables to their starting values}
@!init if not get_strings_started then goto final_end;
init_prim; {call |primitive| for each primitive}
init_str_ptr:=str_ptr; init_pool_ptr:=pool_ptr; fix_date_and_time;
tini@/
ready_already:=314159;
start_of_TEX: @<Initialize the output routines@>;
@<Get the first line of input and prepare to start@>;
history:=spotless; {ready to go!}
main_control; {come to life}
final_cleanup; {prepare for death}
end_of_TEX: close_files_and_terminate;
final_end: ready_already:=0;
end.

@ Here we do whatever is needed to complete \TeX's job gracefully on the
local operating system. The code here might come into play after a fatal
error; it must therefore consist entirely of ``safe'' operations that
cannot produce error messages. For example, it would be a mistake to call
|str_room| or |make_string| at this time, because a call on |overflow|
might lead to an infinite loop.
@^system dependencies@>

Actually there's one way to get error messages, via |prepare_mag|;
but that can't cause infinite recursion.
@^recursion@>

This program doesn't bother to close the input files that may still be open.

@<Last-minute...@>=
procedure close_files_and_terminate;
var k:integer; {all-purpose index}
begin @<Finish the extensions@>;
@!stat if tracing_stats>0 then @<Output statistics about this job@>;@;@+tats@/
wake_up_terminal; @<Finish the \.{DVI} file@>;
if log_opened then
  begin wlog_cr; a_close(log_file); selector:=selector-2;
  if selector=term_only then
    begin print_nl("Transcript written on ");
@.Transcript written...@>
    slow_print(log_name); print_char(".");
    end;
  end;
end;

@ The present section goes directly to the log file instead of using
|print| commands, because there's no need for these strings to take
up |str_pool| memory when a non-{\bf stat} version of \TeX\ is being used.

@<Output statistics...@>=
if log_opened then
  begin wlog_ln(' ');
  wlog_ln('Here is how much of TeX''s memory',' you used:');
@.Here is how much...@>
  wlog(' ',str_ptr-init_str_ptr:1,' string');
  if str_ptr<>init_str_ptr+1 then wlog('s');
  wlog_ln(' out of ', max_strings-init_str_ptr:1);@/
  wlog_ln(' ',pool_ptr-init_pool_ptr:1,' string characters out of ',
    pool_size-init_pool_ptr:1);@/
  wlog_ln(' ',lo_mem_max-mem_min+mem_end-hi_mem_min+2:1,@|
    ' words of memory out of ',mem_end+1-mem_min:1);@/
  wlog_ln(' ',cs_count:1,' multiletter control sequences out of ',
    hash_size:1);@/
  wlog(' ',fmem_ptr:1,' words of font info for ',
    font_ptr-font_base:1,' font');
  if font_ptr<>font_base+1 then wlog('s');
  wlog_ln(', out of ',font_mem_size:1,' for ',font_max-font_base:1);@/
  wlog(' ',hyph_count:1,' hyphenation exception');
  if hyph_count<>1 then wlog('s');
  wlog_ln(' out of ',hyph_size:1);@/
  wlog_ln(' ',max_in_stack:1,'i,',max_nest_stack:1,'n,',@|
    max_param_stack:1,'p,',@|
    max_buf_stack+1:1,'b,',@|
    max_save_stack+6:1,'s stack positions out of ',@|
    stack_size:1,'i,',
    nest_size:1,'n,',
    param_size:1,'p,',
    buf_size:1,'b,',
    save_size:1,'s');
  end

@ We get to the |final_cleanup| routine when \.{\\end} or \.{\\dump} has
been scanned and |its_all_over|\kern-2pt.

@<Last-minute...@>=
procedure final_cleanup;
label exit;
var c:small_number; {0 for \.{\\end}, 1 for \.{\\dump}}
begin c:=cur_chr;
if job_name=0 then open_log_file;
while input_ptr>0 do
  if state=token_list then end_token_list@+else end_file_reading;
while open_parens>0 do
  begin print(" )"); decr(open_parens);
  end;
if cur_level>level_one then
  begin print_nl("("); print_esc("end occurred ");
  print("inside a group at level ");
@:end_}{\.{(\\end occurred...)}@>
  print_int(cur_level-level_one); print_char(")");
  end;
while cond_ptr<>null do
  begin print_nl("("); print_esc("end occurred ");
  print("when "); print_cmd_chr(if_test,cur_if);
  if if_line<>0 then
    begin print(" on line "); print_int(if_line);
    end;
  print(" was incomplete)");
  if_line:=if_line_field(cond_ptr);
  cur_if:=subtype(cond_ptr); temp_ptr:=cond_ptr;
  cond_ptr:=link(cond_ptr); free_node(temp_ptr,if_node_size);
  end;
if history<>spotless then
 if ((history=warning_issued)or(interaction<error_stop_mode)) then
  if selector=term_and_log then
  begin selector:=term_only;
  print_nl("(see the transcript file for additional information)");
@.see the transcript file...@>
  selector:=term_and_log;
  end;
if c=1 then
  begin @!init for c:=top_mark_code to split_bot_mark_code do
    if cur_mark[c]<>null then delete_token_ref(cur_mark[c]);
  store_fmt_file; return;@+tini@/
  print_nl("(\dump is performed only by INITEX)"); return;
@:dump_}{\.{\\dump...only by INITEX}@>
  end;
exit:end;

@ @<Last-minute...@>=
@!init procedure init_prim; {initialize all the primitives}
begin no_new_control_sequence:=false;
@<Put each...@>;
no_new_control_sequence:=true;
end;
tini

@ When we begin the following code, \TeX's tables may still contain garbage;
the strings might not even be present. Thus we must proceed cautiously to get
bootstrapped in.

But when we finish this part of the program, \TeX\ is ready to call on the
|main_control| routine to do its work.

@<Get the first line...@>=
begin @<Initialize the input routines@>;
if (format_ident=0)or(buffer[loc]="&") then
  begin if format_ident<>0 then initialize; {erase preloaded format}
  if not open_fmt_file then goto final_end;
  if not load_fmt_file then
    begin w_close(fmt_file); goto final_end;
    end;
  w_close(fmt_file);
  while (loc<limit)and(buffer[loc]=" ") do incr(loc);
  end;
if end_line_char_inactive then decr(limit)
else  buffer[limit]:=end_line_char;
fix_date_and_time;@/
@<Compute the magic offset@>;
@<Initialize the print |selector|...@>;
if (loc<limit)and(cat_code(buffer[loc])<>escape) then start_input;
  {\.{\\input} assumed}
end

@* \[52] Debugging.
Once \TeX\ is working, you should be able to diagnose most errors with
the \.{\\show} commands and other diagnostic features. But for the initial
stages of debugging, and for the revelation of really deep mysteries, you
can compile \TeX\ with a few more aids, including the \PASCAL\ runtime
checks and its debugger. An additional routine called |debug_help|
will also come into play when you type `\.D' after an error message;
|debug_help| also occurs just before a fatal error causes \TeX\ to succumb.
@^debugging@>
@^system dependencies@>

The interface to |debug_help| is primitive, but it is good enough when used
with a \PASCAL\ debugger that allows you to set breakpoints and to read
variables and change their values. After getting the prompt `\.{debug \#}', you
type either a negative number (this exits |debug_help|), or zero (this
goes to a location where you can set a breakpoint, thereby entering into
dialog with the \PASCAL\ debugger), or a positive number |m| followed by
an argument |n|. The meaning of |m| and |n| will be clear from the
program below. (If |m=13|, there is an additional argument, |l|.)
@.debug \#@>

@d breakpoint=888 {place where a breakpoint is desirable}

@<Last-minute...@>=
@!debug procedure debug_help; {routine to display various things}
label breakpoint,exit;
var k,@!l,@!m,@!n:integer;
begin loop begin wake_up_terminal;
  print_nl("debug # (-1 to exit):"); update_terminal;
@.debug \#@>
  read(term_in,m);
  if m<0 then return
  else if m=0 then
    begin goto breakpoint;@\ {go to every label at least once}
    breakpoint: m:=0; @{'BREAKPOINT'@}@\
    end
  else  begin read(term_in,n);
    case m of
    @t\4@>@<Numbered cases for |debug_help|@>@;
    othercases print("?")
    endcases;
    end;
  end;
exit:end;
gubed

@ @<Numbered cases...@>=
1: print_word(mem[n]); {display |mem[n]| in all forms}
2: print_int(info(n));
3: print_int(link(n));
4: print_word(eqtb[n]);
5: print_word(font_info[n]);
6: print_word(save_stack[n]);
7: show_box(n);
  {show a box, abbreviated by |show_box_depth| and |show_box_breadth|}
8: begin breadth_max:=10000; depth_threshold:=pool_size-pool_ptr-10;
  show_node_list(n); {show a box in its entirety}
  end;
9: show_token_list(n,null,1000);
10: slow_print(n);
11: check_mem(n>0); {check wellformedness; print new busy locations if |n>0|}
12: search_mem(n); {look for pointers to |n|}
13: begin read(term_in,l); print_cmd_chr(n,l);
  end;
14: for k:=0 to n do print(buffer[k]);
15: begin font_in_short_display:=null_font; short_display(n);
  end;
16: panicking:=not panicking;

@* \[53] Extensions.
The program above includes a bunch of ``hooks'' that allow further
capabilities to be added without upsetting \TeX's basic structure.
Most of these hooks are concerned with ``whatsit'' nodes, which are
intended to be used for special purposes; whenever a new extension to
\TeX\ involves a new kind of whatsit node, a corresponding change needs
to be made to the routines below that deal with such nodes,
but it will usually be unnecessary to make many changes to the
other parts of this program.

In order to demonstrate how extensions can be made, we shall treat
`\.{\\write}', `\.{\\openout}', `\.{\\closeout}', `\.{\\immediate}',
`\.{\\special}', and `\.{\\setlanguage}' as if they were extensions.
These commands are actually primitives of \TeX, and they should
appear in all implementations of the system; but let's try to imagine
that they aren't. Then the program below illustrates how a person
could add them.

Sometimes, of course, an extension will require changes to \TeX\ itself;
no system of hooks could be complete enough for all conceivable extensions.
The features associated with `\.{\\write}' are almost all confined to the
following paragraphs, but there are small parts of the |print_ln| and
|print_char| procedures that were introduced specifically to \.{\\write}
characters. Furthermore one of the token lists recognized by the scanner
is a |write_text|; and there are a few other miscellaneous places where we
have already provided for some aspect of \.{\\write}.  The goal of a \TeX\
extender should be to minimize alterations to the standard parts of the
program, and to avoid them completely if possible. He or she should also
be quite sure that there's no easy way to accomplish the desired goals
with the standard features that \TeX\ already has. ``Think thrice before
extending,'' because that may save a lot of work, and it will also keep
incompatible extensions of \TeX\ from proliferating.
@^system dependencies@>
@^extensions to \TeX@>

@ First let's consider the format of whatsit nodes that are used to represent
the data associated with \.{\\write} and its relatives. Recall that a whatsit
has |type=whatsit_node|, and the |subtype| is supposed to distinguish
different kinds of whatsits. Each node occupies two or more words; the
exact number is immaterial, as long as it is readily determined from the
|subtype| or other data.

We shall introduce five |subtype| values here, corresponding to the
control sequences \.{\\openout}, \.{\\write}, \.{\\closeout}, \.{\\special}, and
\.{\\setlanguage}. The second word of I/O whatsits has a |write_stream| field
that identifies the write-stream number (0 to 15, or 16 for out-of-range and
positive, or 17 for out-of-range and negative).
In the case of \.{\\write} and \.{\\special}, there is also a field that
points to the reference count of a token list that should be sent. In the
case of \.{\\openout}, we need three words and three auxiliary subfields
to hold the string numbers for name, area, and extension.

@d write_node_size=2 {number of words in a write/whatsit node}
@d open_node_size=3 {number of words in an open/whatsit node}
@d open_node=0 {|subtype| in whatsits that represent files to \.{\\openout}}
@d write_node=1 {|subtype| in whatsits that represent things to \.{\\write}}
@d close_node=2 {|subtype| in whatsits that represent streams to \.{\\closeout}}
@d special_node=3 {|subtype| in whatsits that represent \.{\\special} things}
@d language_node=4 {|subtype| in whatsits that change the current language}
@d what_lang(#)==link(#+1) {language number, in the range |0..255|}
@d what_lhm(#)==type(#+1) {minimum left fragment, in the range |1..63|}
@d what_rhm(#)==subtype(#+1) {minimum right fragment, in the range |1..63|}
@d write_tokens(#) == link(#+1) {reference count of token list to write}
@d write_stream(#) == info(#+1) {stream number (0 to 17)}
@d open_name(#) == link(#+1) {string number of file name to open}
@d open_area(#) == info(#+2) {string number of file area for |open_name|}
@d open_ext(#) == link(#+2) {string number of file extension for |open_name|}

@ The sixteen possible \.{\\write} streams are represented by the |write_file|
array. The |j|th file is open if and only if |write_open[j]=true|. The last
two streams are special; |write_open[16]| represents a stream number
greater than 15, while |write_open[17]| represents a negative stream number,
and both of these variables are always |false|.

@<Glob...@>=
@!write_file:array[0..15] of alpha_file;
@!write_open:array[0..17] of boolean;

@ @<Set init...@>=
for k:=0 to 17 do write_open[k]:=false;

@ Extensions might introduce new command codes; but it's best to use
|extension| with a modifier, whenever possible, so that |main_control|
stays the same.

@d immediate_code=4 {command modifier for \.{\\immediate}}
@d set_language_code=5 {command modifier for \.{\\setlanguage}}

@<Put each...@>=
primitive("openout",extension,open_node);@/
@!@:open_out_}{\.{\\openout} primitive@>
primitive("write",extension,write_node); write_loc:=cur_val;@/
@!@:write_}{\.{\\write} primitive@>
primitive("closeout",extension,close_node);@/
@!@:close_out_}{\.{\\closeout} primitive@>
primitive("special",extension,special_node);@/
@!@:special_}{\.{\\special} primitive@>
primitive("immediate",extension,immediate_code);@/
@!@:immediate_}{\.{\\immediate} primitive@>
primitive("setlanguage",extension,set_language_code);@/
@!@:set_language_}{\.{\\setlanguage} primitive@>

@ The variable |write_loc| just introduced is used to provide an
appropriate error message in case of ``runaway'' write texts.

@<Glob...@>=
@!write_loc:pointer; {|eqtb| address of \.{\\write}}

@ @<Cases of |print_cmd_chr|...@>=
extension: case chr_code of
  open_node:print_esc("openout");
  write_node:print_esc("write");
  close_node:print_esc("closeout");
  special_node:print_esc("special");
  immediate_code:print_esc("immediate");
  set_language_code:print_esc("setlanguage");
  othercases print("[unknown extension!]")
  endcases;

@ When an |extension| command occurs in |main_control|, in any mode,
the |do_extension| routine is called.

@<Cases of |main_control| that are for extensions...@>=
any_mode(extension):do_extension;

@ @<Declare act...@>=
@t\4@>@<Declare procedures needed in |do_extension|@>@;
procedure do_extension;
var i,@!j,@!k:integer; {all-purpose integers}
@!p,@!q,@!r:pointer; {all-purpose pointers}
begin case cur_chr of
open_node:@<Implement \.{\\openout}@>;
write_node:@<Implement \.{\\write}@>;
close_node:@<Implement \.{\\closeout}@>;
special_node:@<Implement \.{\\special}@>;
immediate_code:@<Implement \.{\\immediate}@>;
set_language_code:@<Implement \.{\\setlanguage}@>;
othercases confusion("ext1")
@:this can't happen ext1}{\quad ext1@>
endcases;
end;

@ Here is a subroutine that creates a whatsit node having a given |subtype|
and a given number of words. It initializes only the first word of the whatsit,
and appends it to the current list.

@<Declare procedures needed in |do_extension|@>=
procedure new_whatsit(@!s:small_number;@!w:small_number);
var p:pointer; {the new node}
begin p:=get_node(w); type(p):=whatsit_node; subtype(p):=s;
link(tail):=p; tail:=p;
end;

@ The next subroutine uses |cur_chr| to decide what sort of whatsit is
involved, and also inserts a |write_stream| number.

@<Declare procedures needed in |do_ext...@>=
procedure new_write_whatsit(@!w:small_number);
begin new_whatsit(cur_chr,w);
if w<>write_node_size then scan_four_bit_int
else  begin scan_int;
  if cur_val<0 then cur_val:=17
  else if cur_val>15 then cur_val:=16;
  end;
write_stream(tail):=cur_val;
end;

@ @<Implement \.{\\openout}@>=
begin new_write_whatsit(open_node_size);
scan_optional_equals; scan_file_name;@/
open_name(tail):=cur_name; open_area(tail):=cur_area; open_ext(tail):=cur_ext;
end

@ When `\.{\\write 12\{...\}}' appears, we scan the token list `\.{\{...\}}'
without expanding its macros; the macros will be expanded later when this
token list is rescanned.

@<Implement \.{\\write}@>=
begin k:=cur_cs; new_write_whatsit(write_node_size);@/
cur_cs:=k; p:=scan_toks(false,false); write_tokens(tail):=def_ref;
end

@ @<Implement \.{\\closeout}@>=
begin new_write_whatsit(write_node_size); write_tokens(tail):=null;
end

@ When `\.{\\special\{...\}}' appears, we expand the macros in the token
list as in \.{\\xdef} and \.{\\mark}.

@<Implement \.{\\special}@>=
begin new_whatsit(special_node,write_node_size); write_stream(tail):=null;
p:=scan_toks(false,true); write_tokens(tail):=def_ref;
end

@ Each new type of node that appears in our data structure must be capable
of being displayed, copied, destroyed, and so on. The routines that we
need for write-oriented whatsits are somewhat like those for mark nodes;
other extensions might, of course, involve more subtlety here.

@<Basic printing...@>=
procedure print_write_whatsit(@!s:str_number;@!p:pointer);
begin print_esc(s);
if write_stream(p)<16 then print_int(write_stream(p))
else if write_stream(p)=16 then print_char("*")
@.*\relax@>
else print_char("-");
end;

@ @<Display the whatsit...@>=
case subtype(p) of
open_node:begin print_write_whatsit("openout",p);
  print_char("="); print_file_name(open_name(p),open_area(p),open_ext(p));
  end;
write_node:begin print_write_whatsit("write",p);
  print_mark(write_tokens(p));
  end;
close_node:print_write_whatsit("closeout",p);
special_node:begin print_esc("special");
  print_mark(write_tokens(p));
  end;
language_node:begin print_esc("setlanguage");
  print_int(what_lang(p)); print(" (hyphenmin ");
  print_int(what_lhm(p)); print_char(",");
  print_int(what_rhm(p)); print_char(")");
  end;
othercases print("whatsit?")
endcases

@ @<Make a partial copy of the whatsit...@>=
case subtype(p) of
open_node: begin r:=get_node(open_node_size); words:=open_node_size;
  end;
write_node,special_node: begin r:=get_node(write_node_size);
  add_token_ref(write_tokens(p)); words:=write_node_size;
  end;
close_node,language_node: begin r:=get_node(small_node_size);
  words:=small_node_size;
  end;
othercases confusion("ext2")
@:this can't happen ext2}{\quad ext2@>
endcases

@ @<Wipe out the whatsit...@>=
begin case subtype(p) of
open_node: free_node(p,open_node_size);
write_node,special_node: begin delete_token_ref(write_tokens(p));
  free_node(p,write_node_size); goto done;
  end;
close_node,language_node: free_node(p,small_node_size);
othercases confusion("ext3")
@:this can't happen ext3}{\quad ext3@>
endcases;@/
goto done;
end

@ @<Incorporate a whatsit node into a vbox@>=do_nothing

@ @<Incorporate a whatsit node into an hbox@>=do_nothing

@ @<Let |d| be the width of the whatsit |p|@>=d:=0

@ @d adv_past(#)==@+if subtype(#)=language_node then
    begin cur_lang:=what_lang(#); l_hyf:=what_lhm(#); r_hyf:=what_rhm(#);@+end

@<Advance \(p)past a whatsit node in the \(l)|line_break| loop@>=@+
adv_past(cur_p)

@ @<Advance \(p)past a whatsit node in the \(p)pre-hyphenation loop@>=@+
adv_past(s)

@ @<Prepare to move whatsit |p| to the current page, then |goto contribute|@>=
goto contribute

@ @<Process whatsit |p| in |vert_break| loop, |goto not_found|@>=
goto not_found

@ @<Output the whatsit node |p| in a vlist@>=
out_what(p)

@ @<Output the whatsit node |p| in an hlist@>=
out_what(p)

@ After all this preliminary shuffling, we come finally to the routines
that actually send out the requested data. Let's do \.{\\special} first
(it's easier).

@<Declare procedures needed in |hlist_out|, |vlist_out|@>=
procedure special_out(@!p:pointer);
var old_setting:0..max_selector; {holds print |selector|}
@!k:pool_pointer; {index into |str_pool|}
begin synch_h; synch_v;@/
old_setting:=selector; selector:=new_string;
show_token_list(link(write_tokens(p)),null,pool_size-pool_ptr);
selector:=old_setting;
str_room(1);
if cur_length<256 then
  begin dvi_out(xxx1); dvi_out(cur_length);
  end
else  begin dvi_out(xxx4); dvi_four(cur_length);
  end;
for k:=str_start[str_ptr] to pool_ptr-1 do dvi_out(so(str_pool[k]));
pool_ptr:=str_start[str_ptr]; {erase the string}
end;

@ To write a token list, we must run it through \TeX's scanner, expanding
macros and \.{\\the} and \.{\\number}, etc. This might cause runaways,
if a delimited macro parameter isn't matched, and runaways would be
extremely confusing since we are calling on \TeX's scanner in the middle
of a \.{\\shipout} command. Therefore we will put a dummy control sequence as
a ``stopper,'' right after the token list. This control sequence is
artificially defined to be \.{\\outer}.
@:end_write_}{\.{\\endwrite}@>

@<Initialize table...@>=
text(end_write):="endwrite"; eq_level(end_write):=level_one;
eq_type(end_write):=outer_call; equiv(end_write):=null;

@ @<Declare procedures needed in |hlist_out|, |vlist_out|@>=
procedure write_out(@!p:pointer);
var old_setting:0..max_selector; {holds print |selector|}
@!old_mode:integer; {saved |mode|}
@!j:small_number; {write stream number}
@!q,@!r:pointer; {temporary variables for list manipulation}
begin @<Expand macros in the token list
  and make |link(def_ref)| point to the result@>;
old_setting:=selector; j:=write_stream(p);
if write_open[j] then selector:=j
else  begin {write to the terminal if file isn't open}
  if (j=17)and(selector=term_and_log) then selector:=log_only;
  print_nl("");
  end;
token_show(def_ref); print_ln;
flush_list(def_ref); selector:=old_setting;
end;

@ The final line of this routine is slightly subtle; at least, the author
didn't think about it until getting burnt! There is a used-up token list
@^Knuth, Donald Ervin@>
on the stack, namely the one that contained |end_write_token|. (We
insert this artificial `\.{\\endwrite}' to prevent runaways, as explained
above.) If it were not removed, and if there were numerous writes on a
single page, the stack would overflow.

@d end_write_token==cs_token_flag+end_write

@<Expand macros in the token list and...@>=
q:=get_avail; info(q):=right_brace_token+"}";@/
r:=get_avail; link(q):=r; info(r):=end_write_token; ins_list(q);@/
begin_token_list(write_tokens(p),write_text);@/
q:=get_avail; info(q):=left_brace_token+"{"; ins_list(q);
{now we're ready to scan
  `\.\{$\langle\,$token list$\,\rangle$\.{\} \\endwrite}'}
old_mode:=mode; mode:=0;
  {disable \.{\\prevdepth}, \.{\\spacefactor}, \.{\\lastskip}, \.{\\prevgraf}}
cur_cs:=write_loc; q:=scan_toks(false,true); {expand macros, etc.}
get_token;@+if cur_tok<>end_write_token then
  @<Recover from an unbalanced write command@>;
mode:=old_mode;
end_token_list {conserve stack space}

@ @<Recover from an unbalanced write command@>=
begin print_err("Unbalanced write command");
@.Unbalanced write...@>
help2("On this page there's a \write with fewer real {'s than }'s.")@/
("I can't handle that very well; good luck."); error;
repeat get_token;
until cur_tok=end_write_token;
end

@ The |out_what| procedure takes care of outputting whatsit nodes for
|vlist_out| and |hlist_out|\kern-.3pt.

@<Declare procedures needed in |hlist_out|, |vlist_out|@>=
procedure out_what(@!p:pointer);
var j:small_number; {write stream number}
begin case subtype(p) of
open_node,write_node,close_node:@<Do some work that has been queued up
  for \.{\\write}@>;
special_node:special_out(p);
language_node:do_nothing;
othercases confusion("ext4")
@:this can't happen ext4}{\quad ext4@>
endcases;
end;

@ We don't implement \.{\\write} inside of leaders. (The reason is that
the number of times a leader box appears might be different in different
implementations, due to machine-dependent rounding in the glue calculations.)
@^leaders@>

@<Do some work that has been queued up...@>=
if not doing_leaders then
  begin j:=write_stream(p);
  if subtype(p)=write_node then write_out(p)
  else  begin if write_open[j] then a_close(write_file[j]);
    if subtype(p)=close_node then write_open[j]:=false
    else if j<16 then
      begin cur_name:=open_name(p); cur_area:=open_area(p);
      cur_ext:=open_ext(p);
      if cur_ext="" then cur_ext:=".tex";
      pack_cur_name;
      while not a_open_out(write_file[j]) do
        prompt_file_name("output file name",".tex");
      write_open[j]:=true;
      end;
    end;
  end

@ The presence of `\.{\\immediate}' causes the |do_extension| procedure
to descend to one level of recursion. Nothing happens unless \.{\\immediate}
is followed by `\.{\\openout}', `\.{\\write}', or `\.{\\closeout}'.
@^recursion@>

@<Implement \.{\\immediate}@>=
begin get_x_token;
if (cur_cmd=extension)and(cur_chr<=close_node) then
  begin p:=tail; do_extension; {append a whatsit node}
  out_what(tail); {do the action immediately}
  flush_node_list(tail); tail:=p; link(p):=null;
  end
else back_input;
end

@ The \.{\\language} extension is somewhat different.
We need a subroutine that comes into play when a character of
a non-|clang| language is being appended to the current paragraph.

@<Declare action...@>=
procedure fix_language;
var @!l:ASCII_code; {the new current language}
begin if language<=0 then l:=0
else if language>255 then l:=0
else l:=language;
if l<>clang then
  begin new_whatsit(language_node,small_node_size);
  what_lang(tail):=l; clang:=l;@/
  what_lhm(tail):=norm_min(left_hyphen_min);
  what_rhm(tail):=norm_min(right_hyphen_min);
  end;
end;

@ @<Implement \.{\\setlanguage}@>=
if abs(mode)<>hmode then report_illegal_case
else begin new_whatsit(language_node,small_node_size);
  scan_int;
  if cur_val<=0 then clang:=0
  else if cur_val>255 then clang:=0
  else clang:=cur_val;
  what_lang(tail):=clang;
  what_lhm(tail):=norm_min(left_hyphen_min);
  what_rhm(tail):=norm_min(right_hyphen_min);
  end

@ @<Finish the extensions@>=
for k:=0 to 15 do if write_open[k] then a_close(write_file[k])

@* \[54] System-dependent changes.
This section should be replaced, if necessary, by any special
modifications of the program
that are necessary to make \TeX\ work at a particular installation.
It is usually best to design your change file so that all changes to
previous sections preserve the section numbering; then everybody's version
will be consistent with the published program. More extensive changes,
which introduce new sections, can be inserted here; then only the index
itself will get a new section number.
@^system dependencies@>

@* \[55] Index.
Here is where you can find all uses of each identifier in the program,
with underlined entries pointing to where the identifier was defined.
If the identifier is only one letter long, however, you get to see only
the underlined entries. {\sl All references are to section numbers instead of
page numbers.}

This index also lists error messages and other aspects of the program
that you might want to look up some day. For example, the entry
for ``system dependencies'' lists all sections that should receive
special attention from people who are installing \TeX\ in a new
operating environment. A list of various things that can't happen appears
under ``this can't happen''. Approximately 40 sections are listed under
``inner loop''; these account for about 60\pct! of \TeX's running time,
exclusive of input and output.