path: root/Build/source/texk/web2c/omegaware/opl2ofm.web

%
% This file is part of the Omega project, which
% is based in the web2c distribution of TeX.
%
% Copyright (c) 1994--2000 John Plaice and Yannis Haralambous
% applies only to the changes to the original pltotf.web
%
% This program by D. E. Knuth is not copyrighted and can be used freely.
% Version 0 was implemented in January 1982.
% In February 1982 a new restriction on ligature steps was added.
% In June 1982 the routines were divided into smaller pieces for IBM people.
% Hex was added in September 1982, and the result became "Version 1".
% Version 1.1 fixed a bug in section 28 (since eoln is undefined after eof).
% Slight changes were made in October, 1982, for version 0.6 of TeX.
% Version 1.2 fixed a bug in section 115 (TOP, MID, and BOT can be zero)
% Version 1.3 (April 1983) blanked out unused BCPL header bytes
% Version 2 (July 1983) was released with TeX version 0.999.
% Version 2.1 (September 1983) changed TEXINFO to FONTDIMEN.
% Version 2.2 (May 1985) added checksum computation to match METAFONT.
% Version 2.3 (August 1985) introduced `backup' to fix a minor bug.
% Version 3 (October 1989) introduced extended ligature features.
% Version 3.1 (November 1989) fixed two bugs (notably min_nl:=0).
% Version 3.2 (December 1989) improved `shorten', increased max_letters.
% Version 3.3 (September 1990) fixed `nonexistent char 0' (John Gourlay).
% Version 3.4 (March 1991) has more robust `out_scaled' (Wayne Sullivan).
% Version 3.5 (March 1995) initialized lk_step_ended (Armin K\"ollner).

% Version 1.0 of OPL2OFM (March 1997) allows one to read OPL files
% and generate OFM files.
% Version 1.11 (February 2000).
% Version 1.12 (September 2009) various bug fixes by Peter Breitenlohner.
% Version 1.13 (January 2014) more bug fixes.

% Here is TeX material that gets inserted after \input webmac
\def\hang{\hangindent 3em\indent\ignorespaces}
\font\ninerm=cmr9
\let\mc=\ninerm % medium caps for names like SAIL
\def\PASCAL{Pascal}
\font\logo=logo10 % for the METAFONT logo
\def\MF{{\logo METAFONT}}

\def\(#1){} % this is used to make section names sort themselves better
\def\9#1{} % this is used for sort keys in the index

\def\title{OPL2OFM}
\def\contentspagenumber{301}
\def\topofcontents{\null
  \def\titlepage{F} % include headline on the contents page
  \def\rheader{\mainfont\hfil \contentspagenumber}
  \vfill
  \centerline{\titlefont The {\ttitlefont OPL2OFM} processor}
  \vskip 15pt
  \centerline{(Version 1.13, January 2014)}
  \vfill}
\def\botofcontents{\vfill
  \centerline{\hsize 5in\baselineskip9pt
    \vbox{\ninerm\noindent
    The preparation of the original report
    was supported in part by the National Science
    Foundation under grants IST-8201926 and MCS-8300984,
    and by the System Development Foundation. `\TeX' is a
    trademark of the American Mathematical Society.}}}
\pageno=\contentspagenumber \advance\pageno by 1

@* Introduction.
The \.{OPL2OFM} utility program converts property-list (``\.{PL}''
and (``\.{OPL}'') files into equivalent \TeX\ and $\Omega$ font metric
(``\.{TFM}'' and ``\.{OFM}) files. It also makes a thorough check of
the given \.{PL} or \.{OPL} file, so that the \.{TFM} or \.{OFM} file
should be acceptable to \TeX\ or $\Omega$.

The first \.{PLtoTF} program was designed by Leo Guibas in the summer of
1978. Contributions by Frank Liang, Doug Wyatt, and Lyle Ramshaw
also had a significant effect on the evolution of the present code.

Extensions for an enhanced ligature mechanism were added by D. E. Knuth
in 1989.

Extensions to handle extended font metric files (``\.{OFM}'') were
added by John Plaice in December 1995 and January 1996, resulting in the
new program \.{OPL2OFM}.  In the following documentation, all unchanged
references to the \.{PLtoTF} program and to \.{TFM} and \.{PL} files also
apply to the \.{OPL2OFM} program and to \.{OFM} and \.{OPL} files.

The |banner| string defined here should be changed whenever \.{OPL2OFM}
gets modified.

@d banner=='This is OPL2OFM, Version 1.13' {printed when the program starts}

@ This program is written entirely in standard \PASCAL, except that
it has to do some slightly system-dependent character code conversion
on input. Furthermore, lower case letters are used in error messages;
they could be converted to upper case if necessary. The input is read
from |pl_file|, and the output is written on |tfm_file|; error messages and
other remarks are written on the |output| file, which the user may
choose to assign to the terminal if the system permits it.
@^system dependencies@>

The term |print| is used instead of |write| when this program writes on
the |output| file, so that all such output can be easily deflected.

@d print(#)==write(#)
@d print_ln(#)==write_ln(#)

@p program OPL2OFM(@!pl_file,@!tfm_file,@!output);
const @<Constants in the outer block@>@/
type @<Types in the outer block@>@/
var @<Globals in the outer block@>@/
procedure initialize; {this procedure gets things started properly}
  var @<Local variables for initialization@>@/
  begin print_ln(banner);@/
  @<Set initial values@>@/
  end;

@ The following parameters can be changed at compile time to extend or
reduce \.{PLtoTF}'s capacity.

@d char_max=@"FFFF
@d xchar_max=char_max+1
@d xxchar_max=xchar_max+1
@d mem_max=xxchar_max+xxchar_max+xxchar_max+xxchar_max
@#
@d width_max=@"FFFF

@<Constants...@>=
@!buf_size=60; {length of lines displayed in error messages}
@!max_header_bytes=100; {four times the maximum number of words allowed in
  the \.{TFM} file header block, must be 1024 or less}
@!max_param_words=100; {the maximum number of \.{fontdimen} parameters allowed}
@!max_lig_steps=800000;
  {maximum length of ligature program, must be at most $32767-257=32510$}
@!xmax_label=800001; {must be greater than |max_lig_steps|}
@!max_kerns=50000; {the maximum number of distinct kern values}
@!hash_size=130003; {preferably a prime number, a bit larger than the number
  of character pairs in lig/kern steps}
@!hash_mult=16007; {another prime}
@!lig_size=800000; {maximum length of |lig_kern| program, in words}
@!max_char=char_max; {the largest character number in a font}
@!xmax_char=xchar_max; {|max_char|+1}
@!xxmax_char=xxchar_max;{|max_char|+2}
@!mem_size=mem_max; {|max_char|*4+8}
@!max_width=width_max; {the largest character width number}
@!max_height=255; {the largest character height number}
@!max_depth=255; {the largest character depth number}
@!max_italic=255; {the largest character italic correction number}

@ Here are some macros for common programming idioms.

@d incr(#) == #:=#+1 {increase a variable by unity}
@d decr(#) == #:=#-1 {decrease a variable by unity}
@d do_nothing == {empty statement}

@* Property list description of font metric data.
The idea behind \.{PL} files is that precise details about fonts, i.e., the
facts that are needed by typesetting routines like \TeX, sometimes have to
be supplied by hand. The nested property-list format provides a reasonably
convenient way to do this.

A good deal of computation is necessary to parse and process a
\.{PL} file, so it would be inappropriate for \TeX\ itself to do this
every time it loads a font. \TeX\ deals only with the compact descriptions
of font metric data that appear in \.{TFM} files. Such data is so compact,
however, it is almost impossible for anybody but a computer to read it.
The purpose of \.{PLtoTF} is to convert from a human-oriented file of text
to a computer-oriented file of binary numbers.

@<Glob...@>=
@!pl_file:text;

@ @<Set init...@>=
reset(pl_file);

@ A \.{PL} file is a list of entries of the form
$$\.{(PROPERTYNAME VALUE)}$$
where the property name is one of a finite set of names understood by
this program, and the value may itself in turn be a property list.
The idea is best understood by looking at an example, so let's consider
a fragment of the \.{PL} file for a hypothetical font.
$$\vbox{\halign{\.{#}\hfil\cr
(FAMILY NOVA)\cr
(FACE F MIE)\cr
(CODINGSCHEME ASCII)\cr
(DESIGNSIZE D 10)\cr
(DESIGNUNITS D 18)\cr
(COMMENT A COMMENT IS IGNORED)\cr
(COMMENT (EXCEPT THIS ONE ISN'T))\cr
(COMMENT (ACTUALLY IT IS, EVEN THOUGH\cr
\qquad\qquad IT SAYS IT ISN'T))\cr
(FONTDIMEN\cr
\qquad   (SLANT R -.25)\cr
\qquad   (SPACE D 6)\cr
\qquad   (SHRINK D 2)\cr
\qquad   (STRETCH D 3)\cr
\qquad   (XHEIGHT R 10.55)\cr
\qquad   (QUAD D 18)\cr
\qquad   )\cr
(LIGTABLE\cr
\qquad   (LABEL C f)\cr
\qquad   (LIG C f O 200)\cr
\qquad   (SKIP D 1)\cr
\qquad   (LABEL O 200)\cr
\qquad   (LIG C i O 201)\cr
\qquad   (KRN O 51 R 1.5)\cr
\qquad   (/LIG C ? C f)\cr
\qquad   (STOP)\cr
\qquad   )\cr
(CHARACTER C f\cr
\qquad   (CHARWD D 6)\cr
\qquad   (CHARHT R 13.5)\cr
\qquad   (CHARIC R 1.5)\cr
\qquad   )\cr}}$$
This example says that the font whose metric information is being described
belongs to the hypothetical
\.{NOVA} family; its face code is medium italic extended;
and the characters appear in ASCII code positions. The design size is 10 points,
and all other sizes in this \.{PL} file are given in units such that 18 units
equals the design size. The font is slanted with a slope of $-.25$ (hence the
letters actually slant backward---perhaps that is why the family name is
\.{NOVA}). The normal space between words is 6 units (i.e., one third of
the 18-unit design size), with glue that shrinks by 2 units or stretches by 3.
The letters for which accents don't need to be raised or lowered are 10.55
units high, and one em equals 18 units.

The example ligature table is a bit trickier. It specifies that the
letter \.f followed by another \.f is changed to code @'200, while
code @'200 followed by \.i is changed to @'201; presumably codes @'200
and @'201 represent the ligatures `ff' and `ffi'.  Moreover, in both cases
\.f and @'200, if the following character is the code @'51 (which is a
right parenthesis), an additional 1.5 units of space should be inserted
before the @'51.  (The `\.{SKIP}~\.D~\.1' skips over one \.{LIG} or
\.{KRN} command, which in this case is the second \.{LIG}; in this way
two different ligature/kern programs can come together.)
Finally, if either \.f or @'200 is followed by a question mark,
the question mark is replaced by \.f and the ligature program is
started over. (Thus, the character pair `\.{f?}' would actually become
the ligature `ff', and `\.{ff?}' or `\.{f?f}' would become `fff'. To
avoid this restart procedure, the \.{/LIG} command could be replaced
by \.{/LIG>}; then `\.{f?} would become `f\kern0ptf' and `\.{f?f}'
would become `f\kern0ptff'.)

Character \.f itself is 6 units wide and 13.5 units tall, in this example.
Its depth is zero (since \.{CHARDP} is not given), and its italic correction
is 1.5 units.

@ The example above illustrates most of the features found in \.{PL} files.
Note that some property names, like \.{FAMILY} or \.{COMMENT}, take a
string as their value; this string continues until the first unmatched
right parenthesis. But most property names, like \.{DESIGNSIZE} and \.{SLANT}
and \.{LABEL}, take a number as their value. This number can be expressed in
a variety of ways, indicated by a prefixed code; \.D stands for decimal,
\.H for hexadecimal, \.O for octal, \.R for real, \.C for character, and
\.F for ``face.''  Other property names, like \.{LIG}, take two numbers as
their value.  And still other names, like \.{FONTDIMEN} and \.{LIGTABLE} and
\.{CHARACTER}, have more complicated values that involve property lists.

A property name is supposed to be used only in an appropriate property
list.  For example, \.{CHARWD} shouldn't occur on the outer level or
within \.{FONTDIMEN}.

The individual property-and-value pairs in a property list can appear in
any order. For instance, `\.{SHRINK}' precedes `\.{STRETCH}' in the above
example, although the \.{TFM} file always puts the stretch parameter first.
One could even give the information about characters like `\.f' before
specifying the number of units in the design size, or before specifying the
ligature and kerning table. However, the \.{LIGTABLE} itself is an exception
to this rule; the individual elements of the \.{LIGTABLE} property list
can be reordered only to a certain extent without changing the meaning
of that table.

If property-and-value pairs are omitted, a default value is used. For example,
we have already noted that the default for \.{CHARDP} is zero. The default
for {\sl every\/} numeric value is, in fact, zero, unless otherwise stated
below.

If the same property name is used more than once, \.{PLtoTF} will not notice
the discrepancy; it simply uses the final value given. Once again, however, the
\.{LIGTABLE} is an exception to this rule; \.{PLtoTF} will complain if there
is more than one label for some character. And of course many of the
entries in the \.{LIGTABLE} property list have the same property name.

From these rules, you can guess (correctly) that \.{PLtoTF} operates in four
main steps. First it assigns the default values to all properties; then it scans
through the \.{PL} file, changing property values as new ones are seen; then
it checks the information and corrects any problems; and finally it outputs
the \.{TFM} file.

@ Instead of relying on a hypothetical example, let's consider a complete
grammar for \.{PL} files. At the outer level, the following property names
are valid:

\yskip\hang\.{CHECKSUM} (four-byte value). The value, which should be a
nonnegative integer less than $2^{32}$, is used to identify a particular
version of a font; it should match the check sum value stored with the font
itself. An explicit check sum of zero is used to bypass
check sum testing. If no checksum is specified in the \.{PL} file,
\.{PLtoTF} will compute the checksum that \MF\ would compute from the
same data.

\yskip\hang\.{DESIGNSIZE} (numeric value, default is 10). The value, which
should be a real number in the range |1.0<=x<2048|, represents the default
amount by which all quantities will be scaled if the font is not loaded
with an `\.{at}' specification. For example, if one says
`\.{\\font\\A=cmr10 at 15pt}' in \TeX\ language, the design size in the \.{TFM}
file is ignored and effectively replaced by 15 points; but if one simply
says `\.{\\font\\A=cmr10}' the stated design size is used. This quantity is
always in units of printer's points.

\yskip\hang\.{DESIGNUNITS} (numeric value, default is 1). The value
should be a positive real number; it says how many units equals the design
size (or the eventual `\.{at}' size, if the font is being scaled). For
example, suppose you have a font that has been digitized with 600 pixels per
em, and the design size is one em; then you could say `\.{(DESIGNUNITS R 600)}'
if you wanted to give all of your measurements in units of pixels.

\yskip\hang\.{CODINGSCHEME} (string value, default is `\.{UNSPECIFIED}').
The string should not contain parentheses, and its length must be less than 40.
It identifies the correspondence between the numeric codes and font characters.
(\TeX\ ignores this information, but other software programs make use of it.)

\yskip\hang\.{FAMILY} (string value, default is `\.{UNSPECIFIED}').
The string should not contain parentheses, and its length must be less than 20.
It identifies the name of the family to which this font belongs, e.g.,
`\.{HELVETICA}'.  (\TeX\ ignores this information; but it is needed, for
example, when converting \.{DVI} files to \.{PRESS} files for Xerox
equipment.)

\yskip\hang\.{FACE} (one-byte value). This number, which must lie between
0 and 255 inclusive, is a subsidiary ident\-ifi\-ca\-tion of the font within its
family. For example, bold italic condensed fonts might have the same family name
as light roman extended fonts, differing only in their face byte.  (\TeX\
ignores this information; but it is needed, for example, when converting
\.{DVI} files to \.{PRESS} files for Xerox equipment.)

\yskip\hang\.{SEVENBITSAFEFLAG} (string value, default is `\.{FALSE}'). The
value should start with either `\.T' (true) or `\.F' (false). If true, character
codes less than 128 cannot lead to codes of 128 or more via ligatures or
charlists or extensible characters. (\TeX82 ignores this flag, but older
versions of \TeX\ would only accept \.{TFM} files that were seven-bit safe.)
\.{PLtoTF} computes the correct value of this flag and gives an error message
only if a claimed ``true'' value is incorrect.

\yskip\hang\.{HEADER} (a one-byte value followed by a four-byte value).
The one-byte value should be between 18 and a maximum limit that can be
raised or lowered depending on the compile-time setting of |max_header_bytes|.
The four-byte value goes into the header word whose index is the one-byte
value; for example, to set |header[18]:=1|, one may write
`\.{(HEADER D 18 O 1)}'. This notation is used for header information that
is presently unnamed. (\TeX\ ignores it.)

\yskip\hang\.{FONTDIMEN} (property list value). See below for the names
allowed in this property list.

\yskip\hang\.{LIGTABLE} (property list value). See below for the rules
about this special kind of property list.

\yskip\hang\.{BOUNDARYCHAR} (integer value). If this character appears in
a \.{LIGTABLE} command, it matches ``end of word'' as well as itself.
If no boundary character is given and no \.{LABEL} \.{BOUNDARYCHAR} occurs
within \.{LIGTABLE}, word boundaries will not affect ligatures or kerning.

\yskip\hang\.{CHARACTER}. The value is an integer followed by
a property list. The integer represents the number of a character that is
present in the font; the property list of a character is defined below.
The default is an empty property list.

@ Numeric property list values can be given in various forms identified by
a prefixed letter.

\yskip\hang\.C denotes an ASCII character, which should be a standard visible
character that is not a parenthesis. The numeric value will therefore be
between @'41 and @'176 but not @'50 or @'51.

\yskip\hang\.D denotes a decimal integer, which must be nonnegative and
less than 256. (Use \.R for larger values or for negative values.)

\yskip\hang\.F denotes a three-letter Xerox face code; the admissible codes
are \.{MRR}, \.{MIR}, \.{BRR}, \.{BIR}, \.{LRR}, \.{LIR}, \.{MRC}, \.{MIC},
\.{BRC}, \.{BIC}, \.{LRC}, \.{LIC}, \.{MRE}, \.{MIE}, \.{BRE}, \.{BIE},
\.{LRE}, and \.{LIE}, denoting the integers 0 to 17, respectively.

\yskip\hang\.O denotes an unsigned octal integer, which must be less than
$2^{32}$, i.e., at most `\.{O 37777777777}'.

\yskip\hang\.H denotes an unsigned hexadecimal integer, which must be less than
$2^{32}$, i.e., at most `\.{H FFFFFFFF}'.

\yskip\hang\.R denotes a real number in decimal notation, optionally preceded
by a `\.+' or `\.-' sign, and optionally including a decimal point. The
absolute value must be less than 2048.

@ The property names allowed in a \.{FONTDIMEN} property list correspond to
various \TeX\ parameters, each of which has a (real) numeric value. All
of the parameters except \.{SLANT} are in design units. The admissible
names are \.{SLANT}, \.{SPACE}, \.{STRETCH}, \.{SHRINK}, \.{XHEIGHT},
\.{QUAD}, \.{EXTRASPACE}, \.{NUM1}, \.{NUM2}, \.{NUM3}, \.{DENOM1},
\.{DENOM2}, \.{SUP1}, \.{SUP2}, \.{SUP3}, \.{SUB1}, \.{SUB2}, \.{SUPDROP},
\.{SUBDROP}, \.{DELIM1}, \.{DELIM2}, and \.{AXISHEIGHT}, for parameters
1~to~22. The alternate names \.{DEFAULTRULETHICKNESS},
\.{BIGOPSPACING1}, \.{BIGOPSPACING2}, \.{BIGOPSPACING3},
\.{BIGOPSPACING4}, and \.{BIGOPSPACING5}, may also be used for parameters
8 to 13.

The notation `\.{PARAMETER} $n$' provides another way to specify the
$n$th parameter; for example, `\.{(PARAMETER} \.{D 1 R -.25)}' is another way
to specify that the \.{SLANT} is $-0.25$. The value of $n$ must be positive
and less than |max_param_words|.

@ The elements of a \.{CHARACTER} property list can be of six different types.

\yskip\hang\.{CHARWD} (real value) denotes the character's width in
design units.

\yskip\hang\.{CHARHT} (real value) denotes the character's height in
design units.

\yskip\hang\.{CHARDP} (real value) denotes the character's depth in
design units.

\yskip\hang\.{CHARIC} (real value) denotes the character's italic correction in
design units.

\yskip\hang\.{NEXTLARGER} (integer value), specifies the character that
follows the present one in a ``charlist.'' The value must be the number of a
character in the font, and there must be no infinite cycles of supposedly
larger and larger characters.

\yskip\hang\.{VARCHAR} (property list value), specifies an extensible character.
This option and \.{NEXTLARGER} are mutually exclusive; i.e., they cannot
both be used within the same \.{CHARACTER} list.

\yskip\noindent
The elements of a \.{VARCHAR} property list are either \.{TOP}, \.{MID},
\.{BOT} or \.{REP}; the values are integers, which must be zero or the number
of a character in the font. A zero value for \.{TOP}, \.{MID}, or \.{BOT} means
that the corresponding piece of the extensible character is absent. A nonzero
value, or a \.{REP} value of zero, denotes the character code used to make
up the top, middle, bottom, or replicated piece of an extensible character.

@ A \.{LIGTABLE} property list contains elements of four kinds, specifying a
program in a simple command language that \TeX\ uses for ligatures and kerns.
If several \.{LIGTABLE} lists appear, they are effectively concatenated into
a single list.

\yskip\hang\.{LABEL} (integer value) means that the program for the
stated character value starts here. The integer must be the number of a
character in the font; its \.{CHARACTER} property list must not have a
\.{NEXTLARGER} or \.{VARCHAR} field. At least one \.{LIG} or \.{KRN} step
must follow.

\yskip\hang\.{LABEL} \.{BOUNDARYCHAR} means that the program for
beginning-of-word ligatures starts here.

\yskip\hang\.{LIG} (two integer values). The instruction `\.{(LIG} $c$ $r$\.)'
means, ``If the next character is $c$, then insert character~$r$ and
possibly delete the current character and/or~$c$;
otherwise go on to the next instruction.''
Characters $r$ and $c$ must be present in the font. \.{LIG} may be immediately
preceded or followed by a slash, and then immediately followed by \.>
characters not exceeding the number of slashes. Thus there are eight
possible forms:
$$\hbox to .8\hsize{\.{LIG}\hfil\.{/LIG}\hfil\.{/LIG>}\hfil
\.{LIG/}\hfil\.{LIG/>}\hfil\.{/LIG/}\hfil\.{/LIG/>}\hfil\.{/LIG/>>}}$$
The slashes specify retention of the left or right original character; the
\.> signs specify passing over the result without further ligature processing.

\yskip\hang\.{KRN} (an integer value and a real value). The instruction
`\.{(KRN} $c$ $r$\.)' means, ``If the next character is $c$, then insert
a blank space of width $r$ between the current character character and $c$;
otherwise go on to the next intruction.'' The value of $r$, which is in
design units, is often negative. Character code $c$ must exist
in the font.

\yskip\hang\.{STOP} (no value). This instruction ends a ligature/kern program.
It must follow either a \.{LIG} or \.{KRN} instruction, not a \.{LABEL}
or \.{STOP} or \.{SKIP}.

\yskip\hang\.{SKIP} (value in the range |0..127|). This instruction specifies
continuation of a ligature/kern program after the specified number of \.{LIG}
or \.{KRN} steps has been skipped over. The number of subsequent \.{LIG} and
\.{KRN} instructions must therefore exceed this specified amount.

@ In addition to all these possibilities, the property name \.{COMMENT} is
allowed in any property list. Such comments are ignored.

@ So that is what \.{PL} files hold. The next question is, ``What about
\.{TFM} files?'' A complete answer to that question appears in the
documentation of the companion program, \.{TFtoPL}, so it will not
be repeated here. Suffice it to say that a \.{TFM} file stores all of the
relevant font information in a sequence of 8-bit bytes. The number of
bytes is always a multiple of 4, so we could regard the \.{TFM} file
as a sequence of 32-bit words; but \TeX\ uses the byte interpretation,
and so does \.{PLtoTF}. Note that the bytes are considered to be unsigned
numbers.

@<Glob...@>=
@!tfm_file:packed file of 0..255;

@ On some systems you may have to do something special to write a
packed file of bytes. For example, the following code didn't work
when it was first tried at Stanford, because packed files have to be
opened with a special switch setting on the \PASCAL\ that was used.
@^system dependencies@>

@<Set init...@>=
rewrite(tfm_file);

@* Basic input routines.
For the purposes of this program, a |byte| is an unsigned 16-bit quantity,
and an |ASCII_code| is an integer between @'40 and @'177. Such ASCII codes
correspond to one-character constants like \.{"A"} in \.{WEB} language.

@<Types...@>=
@!byte=0..65535; {unsigned sixteen-bit quantity}
@!ASCII_code=@'40..@'177; {standard ASCII code numbers}

@ One of the things \.{PLtoTF} has to do is convert characters of strings
to ASCII form, since that is the code used for the family name and the
coding scheme in a \.{TFM} file. An array |xord| is used to do the
conversion from |char|; the method below should work with little or no change
on most \PASCAL\ systems.
@^system dependencies@>

@d first_ord=0 {ordinal number of the smallest element of |char|}
@d last_ord=127 {ordinal number of the largest element of |char|}

@<Global...@>=
@!xord:array[char] of ASCII_code; {conversion table}

@ @<Local variables for init...@>=
@!k:integer; {all-purpose initialization index}

@ Characters that should not appear in \.{PL} files (except in comments)
are mapped into @'177.

@d invalid_code=@'177 {code deserving an error message}

@<Set init...@>=
for k:=first_ord to last_ord do xord[chr(k)]:=invalid_code;
xord[' ']:=" "; xord['!']:="!"; xord['"']:=""""; xord['#']:="#";
xord['$']:="$"; xord['%']:="%"; xord['&']:="&"; xord['''']:="'";
xord['(']:="("; xord[')']:=")"; xord['*']:="*"; xord['+']:="+"; xord[',']:=",";
xord['-']:="-"; xord['.']:="."; xord['/']:="/"; xord['0']:="0"; xord['1']:="1";
xord['2']:="2"; xord['3']:="3"; xord['4']:="4"; xord['5']:="5"; xord['6']:="6";
xord['7']:="7"; xord['8']:="8"; xord['9']:="9"; xord[':']:=":"; xord[';']:=";";
xord['<']:="<"; xord['=']:="="; xord['>']:=">"; xord['?']:="?";
xord['@@']:="@@"; xord['A']:="A"; xord['B']:="B"; xord['C']:="C";
xord['D']:="D"; xord['E']:="E"; xord['F']:="F"; xord['G']:="G"; xord['H']:="H";
xord['I']:="I"; xord['J']:="J"; xord['K']:="K"; xord['L']:="L"; xord['M']:="M";
xord['N']:="N"; xord['O']:="O"; xord['P']:="P"; xord['Q']:="Q"; xord['R']:="R";
xord['S']:="S"; xord['T']:="T"; xord['U']:="U"; xord['V']:="V"; xord['W']:="W";
xord['X']:="X"; xord['Y']:="Y"; xord['Z']:="Z"; xord['[']:="["; xord['\']:="\";
xord[']']:="]"; xord['^']:="^"; xord['_']:="_"; xord['`']:="`"; xord['a']:="a";
xord['b']:="b"; xord['c']:="c"; xord['d']:="d"; xord['e']:="e"; xord['f']:="f";
xord['g']:="g"; xord['h']:="h"; xord['i']:="i"; xord['j']:="j"; xord['k']:="k";
xord['l']:="l"; xord['m']:="m"; xord['n']:="n"; xord['o']:="o"; xord['p']:="p";
xord['q']:="q"; xord['r']:="r"; xord['s']:="s"; xord['t']:="t"; xord['u']:="u";
xord['v']:="v"; xord['w']:="w"; xord['x']:="x"; xord['y']:="y"; xord['z']:="z";
xord['{']:="{"; xord['|']:="|"; xord['}']:="}"; xord['~']:="~";

@ In order to help catch errors of badly nested parentheses, \.{PLtoTF}
assumes that the user will begin each line with a number of blank spaces equal
to some constant times the number of open parentheses at the beginning of
that line. However, the program doesn't know in advance what the constant
is, nor does it want to print an error message on every line for a user
who has followed no consistent pattern of indentation.

Therefore the following strategy is adopted: If the user has been consistent
with indentation for ten or more lines, an indentation error will be
reported. The constant of indentation is reset on every line that should
have nonzero indentation.

@<Glob...@>=
@!line:integer; {the number of the current line}
@!good_indent:integer; {the number of lines since the last bad indentation}
@!indent: integer; {the number of spaces per open parenthesis, zero if unknown}
@!level: integer; {the current number of open parentheses}

@ @<Set init...@>=
line:=0; good_indent:=0; indent:=0; level:=0;

@ The input need not really be broken into lines of any maximum length, and
we could read it character by character without any buffering. But we shall
place it into a small buffer so that offending lines can be displayed in error
messages.

@<Glob...@>=
@!left_ln,@!right_ln:boolean; {are the left and right ends of the buffer
  at end-of-line marks?}
@!limit:0..buf_size; {position of the last character present in the buffer}
@!loc:0..buf_size; {position of the last character read in the buffer}
@!buffer:array[1..buf_size] of char;
@!input_has_ended:boolean; {there is no more input to read}

@ @<Set init...@>=
limit:=0; loc:=0; left_ln:=true; right_ln:=true; input_has_ended:=false;

@ Just before each  \.{CHARACTER} property list is evaluated, the character
code is printed in octal notation. Up to eight such codes appear on a line;
so we have a variable to keep track of how many are currently there.

@<Glob...@>=
@!chars_on_line:0..9; {the number of characters printed on the current line}

@ @<Set init...@>=
chars_on_line:=0;

@ The following routine prints an error message and an indication of
where the error was detected. The error message should not include any
final punctuation, since this procedure supplies its own.

@d err_print(#)==begin if chars_on_line>0 then print_ln(' ');
  print(#); show_error_context;
  end

@p procedure show_error_context; {prints the current scanner location}
var k:0..buf_size; {an index into |buffer|}
begin print_ln(' (line ',line:1,').');
if not left_ln then print('...');
for k:=1 to loc do print(buffer[k]); {print the characters already scanned}
print_ln(' ');
if not left_ln then print('   ');
for k:=1 to loc do print(' '); {space out the second line}
for k:=loc+1 to limit do print(buffer[k]); {print the characters yet unseen}
if right_ln then print_ln(' ')@+else print_ln('...');
chars_on_line:=0;
end;

@ Here is a procedure that does the right thing when we are done
reading the present contents of the buffer. It keeps |buffer[buf_size]|
empty, in order to avoid range errors on certain \PASCAL\ compilers.

An infinite sequence of right parentheses is placed at the end of the
file, so that the program is sure to get out of whatever level of nesting
it is in.

On some systems it is desirable to modify this code so that tab marks
in the buffer are replaced by blank spaces. (Simply setting
|xord[chr(@'11)]:=" "| would not work; for example, two-line
error messages would not come out properly aligned.)
@^system dependencies@>

@p procedure fill_buffer;
begin left_ln:=right_ln; limit:=0; loc:=0;
if left_ln then
  begin if line>0 then read_ln(pl_file);
  incr(line);
  end;
if eof(pl_file) then
  begin limit:=1; buffer[1]:=')'; right_ln:=false; input_has_ended:=true;
  end
else  begin while (limit<buf_size-1)and(not eoln(pl_file)) do
    begin incr(limit); read(pl_file,buffer[limit]);
    end;
  buffer[limit+1]:=' '; right_ln:=eoln(pl_file);
  if left_ln then @<Set |loc| to the number of leading blanks in
    the buffer, and check the indentation@>;
  end;
end;

@ The interesting part about |fill_buffer| is the part that learns what
indentation conventions the user is following, if any.

@d bad_indent(#)==begin if good_indent>=10 then err_print(#);
  good_indent:=0; indent:=0;
  end

@<Set |loc|...@>=
begin while (loc<limit)and(buffer[loc+1]=' ') do incr(loc);
if loc<limit then
  begin if level=0 then
    if loc=0 then incr(good_indent)
    else bad_indent('Warning: Indented line occurred at level zero')
@.Warning: Indented line...@>
  else if indent=0 then
    if loc mod level=0 then
      begin indent:=loc div level; good_indent:=1;
      end
    else good_indent:=0
  else if indent*level=loc then incr(good_indent)
  else bad_indent('Warning: Inconsistent indentation; ',
@.Warning: Inconsistent indentation...@>
    'you are at parenthesis level ',level:1);
  end;
end

@* Basic scanning routines.
The global variable |cur_char| holds the ASCII code corresponding to the
character most recently read from the input buffer, or to a character that
has been substituted for the real one.

@<Global...@>=
@!cur_char:ASCII_code; {we have just read this}

@ Here is a procedure that sets |cur_char| to an ASCII code for the
next character of input, if that character is a letter or digit or slash
or \.>. Otherwise
it sets |cur_char:=" "|, and the input system will be poised to reread the
character that was rejected, whether or not it was a space.
Lower case letters are converted to upper case.

@p procedure get_keyword_char;
begin while (loc=limit)and(not right_ln) do fill_buffer;
if loc=limit then cur_char:=" " {end-of-line counts as a delimiter}
else  begin cur_char:=xord[buffer[loc+1]];
  if cur_char>="a" then cur_char:=cur_char-@'40;
  if ((cur_char>="0")and(cur_char<="9")) then incr(loc)
  else if ((cur_char>="A")and(cur_char<="Z")) then incr(loc)
  else if cur_char="/" then incr(loc)
  else if cur_char=">" then incr(loc)
  else cur_char:=" ";
  end;
end;

@ The following procedure sets |cur_char| to the next character code,
and converts lower case to upper case. If the character is a left or
right parenthesis, it will not be ``digested''; the character will
be read again and again, until the calling routine does something
like `|incr(loc)|' to get past it. Such special treatment of parentheses
insures that the structural information they contain won't be lost in
the midst of other error recovery operations.

@d backup==begin if (cur_char>")")or(cur_char<"(") then decr(loc);
  end {undoes the effect of |get_next|}

@p procedure get_next; {sets |cur_char| to next, balks at parentheses}
begin while loc=limit do fill_buffer;
incr(loc); cur_char:=xord[buffer[loc]];
if cur_char>="a" then
  if cur_char<="z" then cur_char:=cur_char-@'40 {uppercasify}
  else  begin if cur_char=invalid_code then
      begin err_print('Illegal character in the file');
@.Illegal character...@>
      cur_char:="?";
      end;
    end
else if (cur_char<=")")and(cur_char>="(") then decr(loc);
end;

@ The next procedure is used to ignore the text of a comment, or to pass over
erroneous material. As such, it has the privilege of passing parentheses.
It stops after the first right parenthesis that drops the level below
the level in force when the procedure was called.

@p procedure skip_to_end_of_item;
var l:integer; {initial value of |level|}
begin l:=level;
while level>=l do
  begin while loc=limit do fill_buffer;
  incr(loc);
  if buffer[loc]=')' then decr(level)
  else if buffer[loc]='(' then incr(level);
  end;
if input_has_ended then err_print('File ended unexpectedly: No closing ")"');
@.File ended unexpectedly...@>
cur_char:=" "; {now the right parenthesis has been read and digested}
end;

@ Sometimes we merely want to skip past characters in the input until we
reach a left or a right parenthesis. For example, we do this whenever we
have finished scanning a property value and we hope that a right parenthesis
is next (except for possible blank spaces).

@d skip_to_paren==repeat get_next@;@+ until (cur_char="(")or(cur_char=")")
@d skip_error(#)==begin err_print(#); skip_to_paren;
  end {this gets to the right parenthesis if something goes wrong}
@d flush_error(#)==begin err_print(#); skip_to_end_of_item;
  end {this gets past the right parenthesis if something goes wrong}

@ After a property value has been scanned, we want to move just past the
right parenthesis that should come next in the input (except for possible
blank spaces).

@p procedure finish_the_property; {do this when the value has been scanned}
begin while cur_char=" " do get_next;
if cur_char<>")" then err_print('Junk after property value will be ignored');
@.Junk after property value...@>
skip_to_end_of_item;
end;

@* Scanning property names.
We have to figure out the meaning of names that appear in the \.{PL} file,
by looking them up in a dictionary of known keywords. Keyword number $n$
appears in locations |start[n]| through |start[n+1]-1| of an array called
|dictionary|.

@d max_name_index=300 {upper bound on the number of keywords}
@d max_letters=3000 {upper bound on the total length of all keywords}

@<Global...@>=
@!start:array[1..max_name_index] of 0..max_letters;
@!dictionary:array[0..max_letters] of ASCII_code;
@!start_ptr:0..max_name_index; {the first available place in |start|}
@!dict_ptr:0..max_letters; {the first available place in |dictionary|}

@ @<Set init...@>=
start_ptr:=1; start[1]:=0; dict_ptr:=0;

@ When we are looking for a name, we put it into the |cur_name| array.
When we have found it, the corresponding |start| index will go into
the global variable |name_ptr|.

@d longest_name=20 {length of \.{DEFAULTRULETHICKNESS}}

@<Glob...@>=
@!cur_name:array[1..longest_name] of ASCII_code; {a name to look up}
@!name_length:0..longest_name; {its length}
@!name_ptr:0..max_name_index; {its ordinal number in the dictionary}

@ A conventional hash table with linear probing (cf.\ Algorithm 6.4L
in {\sl The Art of Computer Pro\-gram\-ming\/}) is used for the dictionary
operations. If |nhash[h]=0|, the table position is empty, otherwise |nhash[h]|
points into the |start| array.

@d hash_prime=307 {size of the hash table}

@<Glob...@>=
@!nhash:array[0..hash_prime-1] of 0..max_name_index;
@!cur_hash:0..hash_prime-1; {current position in the hash table}

@ @<Local...@>=
@!h:0..hash_prime-1; {runs through the hash table}

@ @<Set init...@>=
for h:=0 to hash_prime-1 do nhash[h]:=0;

@ Since there is no chance of the hash table overflowing, the procedure
is very simple. After |lookup| has done its work, |cur_hash| will point
to the place where the given name was found, or where it should be inserted.

@p procedure lookup; {finds |cur_name| in the dictionary}
var k:0..longest_name; {index into |cur_name|}
@!j:0..max_letters; {index into |dictionary|}
@!not_found:boolean; {clumsy thing necessary to avoid |goto| statement}
@!cur_hash_reset:boolean;
begin @<Compute the hash code, |cur_hash|, for |cur_name|@>;
not_found:=true;
cur_hash_reset:=false;
while not_found do
  begin if (cur_hash=0) and (cur_hash_reset) then
    not_found:=false
  else begin
    if cur_hash=0 then begin
      cur_hash:=hash_prime-1;
      cur_hash_reset:=true
      end
    else decr(cur_hash);
    if nhash[cur_hash]=0 then not_found:=false
    else begin
      j:=start[nhash[cur_hash]];
      if start[nhash[cur_hash]+1]=j+name_length then begin
        not_found:=false;
        for k:=1 to name_length do
          if dictionary[j+k-1]<>cur_name[k] then not_found:=true;
        end
      end
    end
  end;
name_ptr:=nhash[cur_hash];
end;

@ @<Compute the hash...@>=
cur_hash:=cur_name[1];
for k:=2 to name_length do
  cur_hash:=(cur_hash+cur_hash+cur_name[k]) mod hash_prime

@ The ``meaning'' of the keyword that begins at |start[k]| in the
dictionary is kept in |equiv[k]|. The numeric |equiv| codes are given
symbolic meanings by the following definitions.

@d comment_code=0
@#{property names at the outer level}
@d check_sum_code=1
@d design_size_code=2
@d design_units_code=3
@d coding_scheme_code=4
@d family_code=5
@d face_code=6
@d seven_bit_safe_flag_code=7
@d header_code= 8
@d font_dimen_code=9
@d lig_table_code=10
@d boundary_char_code=11
@d character_code=14
@d font_dir_code=15
@d n_font_dir_code=16
@d ofm_level_code=17
@d font_rule_code=18
@d font_glue_code=19
@d font_penalty_code=20
@d font_mvalue_code=21
@d font_fvalue_code=22
@d font_ivalue_code=23
@d char_repeat_code=24
@#{property names in a FONTDIMEN list}
@d parameter_code=30
@#{property names in a CHARACTER list}
@d char_info_code=70
@d width=1
@d height=2
@d depth=3
@d italic=4
@d sec_width=5
@d sec_height=6
@d sec_depth=7
@d sec_italic=8
@d accent=9
@d prim_top_axis=10
@d prim_top_axis_bis=11
@d prim_bot_axis=12
@d prim_bot_axis_bis=13
@d prim_mid_hor=14
@d prim_mid_vert=15
@d prim_base_slant=16
@d sec_top_axis=17
@d sec_top_axis_bis=18
@d sec_bot_axis=19
@d sec_bot_axis_bis=20
@d sec_mid_hor=21
@d sec_mid_vert=22
@d sec_base_slant=23
@d char_wd_code=char_info_code+width
@d char_ht_code=char_info_code+height
@d char_dp_code=char_info_code+depth
@d char_ic_code=char_info_code+italic
@d sec_width_code=char_info_code+sec_width
@d sec_height_code=char_info_code+sec_height
@d sec_depth_code=char_info_code+sec_depth
@d sec_italic_code=char_info_code+sec_italic
@d accent_code=char_info_code+accent
@d prim_top_axis_code=char_info_code+prim_top_axis
@d prim_top_axis_bis_code=char_info_code+prim_top_axis_bis
@d prim_bot_axis_code=char_info_code+prim_bot_axis
@d prim_bot_axis_bis_code=char_info_code+prim_bot_axis_bis
@d prim_mid_hor_code=char_info_code+prim_mid_hor
@d prim_mid_vert_code=char_info_code+prim_mid_vert
@d prim_base_slant_code=char_info_code+prim_base_slant
@d sec_top_axis_code=char_info_code+sec_top_axis
@d sec_top_axis_bis_code=char_info_code+sec_top_axis_bis
@d sec_bot_axis_code=char_info_code+sec_bot_axis
@d sec_bot_axis_bis_code=char_info_code+sec_bot_axis_bis
@d sec_mid_hor_code=char_info_code+sec_mid_hor
@d sec_mid_vert_code=char_info_code+sec_mid_vert
@d sec_base_slant_code=char_info_code+sec_base_slant
@d next_larger_code=100
@d char_ivalue_code=111
@d char_fvalue_code=112
@d char_mvalue_code=113
@d char_rule_code=114
@d char_glue_code=115
@d char_penalty_code=116
@d var_char_code=117
@#{property names in a LIGTABLE list}
@d label_code=130
@d stop_code=131
@d skip_code=132
@d krn_code=133
@d lig_code=134
@d clabel_code=150
@d cpen_code=151
@d cglue_code=152
@d cpenglue_code=153
@d ckrn_code=154
@#{property names in a FONTRULE list}
@d rule_code=161
@d rule_width_code=162
@d rule_height_code=163
@d rule_depth_code=164
@#{property names in a FONTGLUE list}
@d glue_code=171
@d glue_type_code=172
@d glue_stretch_order_code=173
@d glue_shrink_order_code=174
@d glue_width_code=175
@d glue_stretch_code=176
@d glue_shrink_code=177
@d glue_char_code=178
@d glue_rule_code=179
@#{property names in a FONTPENALTY list}
@d penalty_code=191
@d penalty_val_code=192
@#{property names in a FONTMVALUE list}
@d mvalue_code=193
@d mvalue_val_code=194
@#{property names in a FONTFVALUE list}
@d fvalue_code=195
@d fvalue_val_code=196
@#{property names in a FONTIVALUE list}
@d ivalue_code=197
@d ivalue_val_code=198

@<Glo...@>=
@!equiv:array[0..max_name_index] of byte;
@!cur_code:byte; {equivalent most recently found in |equiv|}

@ We have to get the keywords into the hash table and into the dictionary in
the first place (sigh). The procedure that does this has the desired
|equiv| code as a parameter. In order to facilitate \.{WEB} macro writing
for the initialization, the keyword being initialized is placed into the
last positions of |cur_name|, instead of the first positions.

@p procedure enter_name(v:byte); {|cur_name| goes into the dictionary}
var k:0..longest_name;
begin for k:=1 to name_length do
  cur_name[k]:=cur_name[k+longest_name-name_length];
{now the name has been shifted into the correct position}
lookup; {this sets |cur_hash| to the proper insertion place}
nhash[cur_hash]:=start_ptr; equiv[start_ptr]:=v;
for k:=1 to name_length do
  begin dictionary[dict_ptr]:=cur_name[k]; incr(dict_ptr);
  end;
incr(start_ptr); start[start_ptr]:=dict_ptr;
end;

@ Here are the macros to load a name of up to 20 letters into the
dictionary. For example, the macro |load5| is used for five-letter keywords.

@d tail(#)==enter_name(#)
@d t20(#)==cur_name[20]:=#;tail
@d t19(#)==cur_name[19]:=#;t20
@d t18(#)==cur_name[18]:=#;t19
@d t17(#)==cur_name[17]:=#;t18
@d t16(#)==cur_name[16]:=#;t17
@d t15(#)==cur_name[15]:=#;t16
@d t14(#)==cur_name[14]:=#;t15
@d t13(#)==cur_name[13]:=#;t14
@d t12(#)==cur_name[12]:=#;t13
@d t11(#)==cur_name[11]:=#;t12
@d t10(#)==cur_name[10]:=#;t11
@d t9(#)==cur_name[9]:=#;t10
@d t8(#)==cur_name[8]:=#;t9
@d t7(#)==cur_name[7]:=#;t8
@d t6(#)==cur_name[6]:=#;t7
@d t5(#)==cur_name[5]:=#;t6
@d t4(#)==cur_name[4]:=#;t5
@d t3(#)==cur_name[3]:=#;t4
@d t2(#)==cur_name[2]:=#;t3
@d t1(#)==cur_name[1]:=#;t2
@d load2==name_length:=2;t19
@d load3==name_length:=3;t18
@d load4==name_length:=4;t17
@d load5==name_length:=5;t16
@d load6==name_length:=6;t15
@d load7==name_length:=7;t14
@d load8==name_length:=8;t13
@d load9==name_length:=9;t12
@d load10==name_length:=10;t11
@d load11==name_length:=11;t10
@d load12==name_length:=12;t9
@d load13==name_length:=13;t8
@d load14==name_length:=14;t7
@d load15==name_length:=15;t6
@d load16==name_length:=16;t5
@d load17==name_length:=17;t4
@d load18==name_length:=18;t3
@d load19==name_length:=19;t2
@d load20==name_length:=20;t1

@ (Thank goodness for keyboard macros in the text editor used to create this
\.{WEB} file.)

@<Enter all of the names and their equivalents, except the parameter names@>=
equiv[0]:=comment_code; {this is used after unknown keywords}
load8("C")("H")("E")("C")("K")("S")("U")("M")(check_sum_code);@/
load10("D")("E")("S")("I")("G")("N")("S")("I")("Z")("E")(design_size_code);@/
load11("D")("E")("S")("I")("G")("N")
  ("U")("N")("I")("T")("S")(design_units_code);@/
load12("C")("O")("D")("I")("N")("G")
  ("S")("C")("H")("E")("M")("E")(coding_scheme_code);@/
load6("F")("A")("M")("I")("L")("Y")(family_code);@/
load4("F")("A")("C")("E")(face_code);@/
load16("S")("E")("V")("E")("N")("B")("I")("T")@/@t\hskip2em@>
  ("S")("A")("F")("E")("F")("L")("A")("G")(seven_bit_safe_flag_code);@/
load6("H")("E")("A")("D")("E")("R")(header_code);@/
load9("F")("O")("N")("T")("D")("I")("M")("E")("N")(font_dimen_code);@/
load8("L")("I")("G")("T")("A")("B")("L")("E")(lig_table_code);@/
load12("B")("O")("U")("N")("D")("A")("R")("Y")("C")("H")("A")("R")
  (boundary_char_code);@/
load9("C")("H")("A")("R")("A")("C")("T")("E")("R")(character_code);@/
load9("P")("A")("R")("A")("M")("E")("T")("E")("R")(parameter_code);@/
load6("C")("H")("A")("R")("W")("D")(char_wd_code);@/
load6("C")("H")("A")("R")("H")("T")(char_ht_code);@/
load6("C")("H")("A")("R")("D")("P")(char_dp_code);@/
load6("C")("H")("A")("R")("I")("C")(char_ic_code);@/
load5("S")("E")("C")("W")("D")(sec_width_code);@/
load5("S")("E")("C")("H")("T")(sec_height_code);@/
load5("S")("E")("C")("D")("P")(sec_depth_code);@/
load5("S")("E")("C")("I")("C")(sec_italic_code);@/
load6("A")("C")("C")("E")("N")("T")(accent_code);@/
load11("P")("R")("I")("M")("T")("O")("P")("A")("X")("I")("S")(prim_top_axis_code);@/
load14("P")("R")("I")("M")("T")("O")("P")("A")("X")("I")("S")("B")("I")("S")(prim_top_axis_bis_code);@/
load11("P")("R")("I")("M")("B")("O")("T")("A")("X")("I")("S")(prim_bot_axis_code);@/
load14("P")("R")("I")("M")("B")("O")("T")("A")("X")("I")("S")("B")("I")("S")(prim_bot_axis_bis_code);@/
load10("P")("R")("I")("M")("M")("I")("D")("H")("O")("R")(prim_mid_hor_code);@/
load10("P")("R")("I")("M")("M")("I")("D")("V")("E")("R")(prim_mid_vert_code);@/
load13("P")("R")("I")("M")("B")("A")("S")("E")("S")("L")("A")("N")("T")(prim_base_slant_code);@/
load10("S")("E")("C")("T")("O")("P")("A")("X")("I")("S")(sec_top_axis_code);@/
load13("S")("E")("C")("T")("O")("P")("A")("X")("I")("S")("B")("I")("S")(sec_top_axis_bis_code);@/
load10("S")("E")("C")("B")("O")("T")("A")("X")("I")("S")(sec_bot_axis_code);@/
load13("S")("E")("C")("B")("O")("T")("A")("X")("I")("S")("B")("I")("S")(sec_bot_axis_bis_code);@/
load9("S")("E")("C")("M")("I")("D")("H")("O")("R")(sec_mid_hor_code);@/
load9("S")("E")("C")("M")("I")("D")("V")("E")("R")(sec_mid_vert_code);@/
load12("S")("E")("C")("B")("A")("S")("E")("S")("L")("A")("N")("T")(sec_base_slant_code);@/
load10("N")("E")("X")("T")("L")("A")("R")("G")("E")("R")(next_larger_code);@/
load7("V")("A")("R")("C")("H")("A")("R")(var_char_code);@/
load3("T")("O")("P")(var_char_code+1);@/
load3("M")("I")("D")(var_char_code+2);@/
load3("B")("O")("T")(var_char_code+3);@/
load3("R")("E")("P")(var_char_code+4);@/
load3("E")("X")("T")(var_char_code+4); {compatibility with older \.{PL} format}
load7("C")("O")("M")("M")("E")("N")("T")(comment_code);@/
load5("L")("A")("B")("E")("L")(label_code);@/
load4("S")("T")("O")("P")(stop_code);@/
load4("S")("K")("I")("P")(skip_code);@/
load3("K")("R")("N")(krn_code);@/
load3("L")("I")("G")(lig_code);@/
load4("/")("L")("I")("G")(lig_code+2);@/
load5("/")("L")("I")("G")(">")(lig_code+6);@/
load4("L")("I")("G")("/")(lig_code+1);@/
load5("L")("I")("G")("/")(">")(lig_code+5);@/
load5("/")("L")("I")("G")("/")(lig_code+3);@/
load6("/")("L")("I")("G")("/")(">")(lig_code+7);@/
load7("/")("L")("I")("G")("/")(">")(">")(lig_code+11);@/
load6("C")("L")("A")("B")("E")("L")(clabel_code);@/
load4("C")("P")("E")("N")(cpen_code);@/
load5("C")("G")("L")("U")("E")(cglue_code);@/
load8("C")("P")("E")("N")("G")("L")("U")("E")(cpenglue_code);@/
load4("C")("K")("R")("N")(ckrn_code);@/
load8("O")("F")("M")("L")("E")("V")("E")("L")(ofm_level_code);@/
load7("F")("O")("N")("T")("D")("I")("R")(font_dir_code);@/
load8("N")("F")("O")("N")("T")("D")("I")("R")(n_font_dir_code);@/
load14("N")("A")("T")("U")("R")("A")("L")("F")("O")("N")("T")("D")("I")("R")(n_font_dir_code);
  {compatibility with \.{omegafonts} (\.{C}) version}
load10("C")("H")("A")("R")("R")("E")("P")("E")("A")("T")(char_repeat_code);@/
load10("C")("H")("A")("R")("I")("V")("A")("L")("U")("E")(char_ivalue_code);@/
load10("C")("H")("A")("R")("F")("V")("A")("L")("U")("E")(char_fvalue_code);@/
load10("C")("H")("A")("R")("M")("V")("A")("L")("U")("E")(char_mvalue_code);@/
load8("C")("H")("A")("R")("R")("U")("L")("E")(char_rule_code);@/
load8("C")("H")("A")("R")("G")("L")("U")("E")(char_glue_code);@/
load11("C")("H")("A")("R")("P")("E")("N")("A")("L")("T")("Y")(char_penalty_code);@/
load8("F")("O")("N")("T")("R")("U")("L")("E")(font_rule_code);@/
load4("R")("U")("L")("E")(rule_code);@/
load6("R")("U")("L")("E")("W")("D")(rule_width_code);@/
load6("R")("U")("L")("E")("H")("T")(rule_height_code);@/
load6("R")("U")("L")("E")("D")("P")(rule_depth_code);@/
load8("F")("O")("N")("T")("G")("L")("U")("E")(font_glue_code);@/
load4("G")("L")("U")("E")(glue_code);@/
load8("G")("L")("U")("E")("T")("Y")("P")("E")(glue_type_code);@/
load16("G")("L")("U")("E")("S")("T")("R")("E")("T")("C")("H")("O")("R")("D")("E")("R")(glue_stretch_order_code);@/
load15("G")("L")("U")("E")("S")("H")("R")("I")("N")("K")("O")("R")("D")("E")("R")(glue_shrink_order_code);@/
load8("G")("L")("U")("E")("R")("U")("L")("E")(glue_rule_code);@/
load8("G")("L")("U")("E")("C")("H")("A")("R")(glue_char_code);@/
load6("G")("L")("U")("E")("W")("D")(glue_width_code);@/
load11("G")("L")("U")("E")("S")("T")("R")("E")("T")("C")("H")(glue_stretch_code);@/
load10("G")("L")("U")("E")("S")("H")("R")("I")("N")("K")(glue_shrink_code);@/
load11("F")("O")("N")("T")("P")("E")("N")("A")("L")("T")("Y")(font_penalty_code);@/
load7("P")("E")("N")("A")("L")("T")("Y")(penalty_code);@/
load10("P")("E")("N")("A")("L")("T")("Y")("V")("A")("L")(penalty_val_code);@/
load10("F")("O")("N")("T")("M")("V")("A")("L")("U")("E")(font_mvalue_code);@/
load6("M")("V")("A")("L")("U")("E")(mvalue_code);@/
load9("M")("V")("A")("L")("U")("E")("V")("A")("L")(mvalue_val_code);@/
load10("F")("O")("N")("T")("F")("V")("A")("L")("U")("E")(font_fvalue_code);@/
load6("F")("V")("A")("L")("U")("E")(fvalue_code);@/
load9("F")("V")("A")("L")("U")("E")("V")("A")("L")(fvalue_val_code);@/
load10("F")("O")("N")("T")("I")("V")("A")("L")("U")("E")(font_ivalue_code);@/
load6("I")("V")("A")("L")("U")("E")(ivalue_code);@/
load9("I")("V")("A")("L")("U")("E")("V")("A")("L")(ivalue_val_code);@/

@ @<Enter the parameter names@>=
load5("S")("L")("A")("N")("T")(parameter_code+1);@/
load5("S")("P")("A")("C")("E")(parameter_code+2);@/
load7("S")("T")("R")("E")("T")("C")("H")(parameter_code+3);@/
load6("S")("H")("R")("I")("N")("K")(parameter_code+4);@/
load7("X")("H")("E")("I")("G")("H")("T")(parameter_code+5);@/
load4("Q")("U")("A")("D")(parameter_code+6);@/
load10("E")("X")("T")("R")("A")("S")("P")("A")("C")("E")(parameter_code+7);@/
load4("N")("U")("M")("1")(parameter_code+8);@/
load4("N")("U")("M")("2")(parameter_code+9);@/
load4("N")("U")("M")("3")(parameter_code+10);@/
load6("D")("E")("N")("O")("M")("1")(parameter_code+11);@/
load6("D")("E")("N")("O")("M")("2")(parameter_code+12);@/
load4("S")("U")("P")("1")(parameter_code+13);@/
load4("S")("U")("P")("2")(parameter_code+14);@/
load4("S")("U")("P")("3")(parameter_code+15);@/
load4("S")("U")("B")("1")(parameter_code+16);@/
load4("S")("U")("B")("2")(parameter_code+17);@/
load7("S")("U")("P")("D")("R")("O")("P")(parameter_code+18);@/
load7("S")("U")("B")("D")("R")("O")("P")(parameter_code+19);@/
load6("D")("E")("L")("I")("M")("1")(parameter_code+20);@/
load6("D")("E")("L")("I")("M")("2")(parameter_code+21);@/
load10("A")("X")("I")("S")("H")("E")("I")("G")("H")("T")(parameter_code+22);@/
load20("D")("E")("F")("A")("U")("L")("T")("R")("U")("L")("E")@/@t\hskip2em@>
  ("T")("H")("I")("C")("K")("N")("E")("S")("S")(parameter_code+8);@/
load13("B")("I")("G")("O")("P")
  ("S")("P")("A")("C")("I")("N")("G")("1")(parameter_code+9);@/
load13("B")("I")("G")("O")("P")
  ("S")("P")("A")("C")("I")("N")("G")("2")(parameter_code+10);@/
load13("B")("I")("G")("O")("P")
  ("S")("P")("A")("C")("I")("N")("G")("3")(parameter_code+11);@/
load13("B")("I")("G")("O")("P")
  ("S")("P")("A")("C")("I")("N")("G")("4")(parameter_code+12);@/
load13("B")("I")("G")("O")("P")
  ("S")("P")("A")("C")("I")("N")("G")("5")(parameter_code+13);@/

@ When a left parenthesis has been scanned, the following routine
is used to interpret the keyword that follows, and to store the
equivalent value in |cur_code|.

@p procedure get_name;
begin incr(loc); incr(level); {pass the left parenthesis}
cur_char:=" ";
while cur_char=" " do get_next;
if (cur_char>")")or(cur_char<"(") then decr(loc); {back up one character}
name_length:=0; get_keyword_char; {prepare to scan the name}
while cur_char<>" " do
  begin if name_length=longest_name then cur_name[1]:="X" {force error}
  else incr(name_length);
  cur_name[name_length]:=cur_char;
  get_keyword_char;
  end;
lookup;
if name_ptr=0 then err_print('Sorry, I don''t know that property name');
@.Sorry, I don't know...@>
cur_code:=equiv[name_ptr];
end;

@* Scanning numeric data.
The next thing we need is a trio of subroutines to read the one-byte,
four-byte, and real numbers that may appear as property values.
These subroutines are careful to stick to numbers between $-2^{31}$
and $2^{31}-1$, inclusive, so that a computer with two's complement
32-bit arithmetic will not be interrupted by overflow.

@ The first number scanner, which returns a one-byte value, surely has
no problems of arithmetic overflow.

@p function get_byte:byte; {scans a one-byte property value}
var acc:integer; {an accumulator}
@!t:ASCII_code; {the type of value to be scanned}
begin repeat get_next;
until cur_char<>" "; {skip the blanks before the type code}
t:=cur_char; acc:=0;
repeat get_next;
until cur_char<>" "; {skip the blanks after the type code}
if t="C" then @<Scan an ASCII character code@>
else if t="D" then @<Scan a small decimal number@>
else if t="O" then @<Scan a small octal number@>
else if t="H" then @<Scan a small hexadecimal number@>
else if t="F" then @<Scan a face code@>
else skip_error('You need "C" or "D" or "O" or "H" or "F" here');
@.You need "C" or "D" ...here@>
cur_char:=" "; get_byte:=acc;
end;

@ The |get_next| routine converts lower case to upper case, but it leaves
the character in the buffer, so we can unconvert it.

@<Scan an ASCII...@>=
if (cur_char>=@'41)and(cur_char<=@'176)and
 ((cur_char<"(")or(cur_char>")")) then
  acc:=xord[buffer[loc]]
else skip_error('"C" value must be standard ASCII and not a paren')
@:C value}\.{"C" value must be...@>

@ @<Scan a small dec...@>=
begin while (cur_char>="0")and(cur_char<="9") do
  begin acc:=acc*10+cur_char-"0";
  if acc>char_max then
    begin skip_error('This value shouldn''t exceed 65535');
@.This value shouldn't...@>
    acc:=0; cur_char:=" ";
    end
  else get_next;
  end;
backup;
end

@ @<Scan a small oct...@>=
begin while (cur_char>="0")and(cur_char<="7") do
  begin acc:=acc*8+cur_char-"0";
  if acc>char_max then
    begin skip_error('This value shouldn''t exceed ''177777');
@.This value shouldn't...@>
    acc:=0; cur_char:=" ";
    end
  else get_next;
  end;
backup;
end

@ @<Scan a small hex...@>=
begin while ((cur_char>="0")and(cur_char<="9"))or
   ((cur_char>="A")and(cur_char<="F")) do
  begin if cur_char>="A" then cur_char:=cur_char+"0"+10-"A";
  acc:=acc*16+cur_char-"0";
  if acc>char_max then
    begin skip_error('This value shouldn''t exceed "FFFF');
@.This value shouldn't...@>
    acc:=0; cur_char:=" ";
    end
  else get_next;
  end;
backup;
end

@ @<Scan a face...@>=
begin if cur_char="B" then acc:=2
else if cur_char="L" then acc:=4
else if cur_char<>"M" then acc:=18;
get_next;
if cur_char="I" then incr(acc)
else if cur_char<>"R" then acc:=18;
get_next;
if cur_char="C" then acc:=acc+6
else if cur_char="E" then acc:=acc+12
else if cur_char<>"R" then acc:=18;
if acc>=18 then
  begin skip_error('Illegal face code, I changed it to MRR');
@.Illegal face code...@>
  acc:=0;
  end;
end

@ The routine that scans a four-byte value puts its output into |cur_bytes|,
which is a record containing (yes, you guessed it) four bytes.

@<Types...@>=
@!four_bytes=record @!b0:byte;@+@!b1:byte;@+@!b2:byte;@+@!b3:byte;@+end;

@ @d c0==cur_bytes.b0
@d c1==cur_bytes.b1
@d c2==cur_bytes.b2
@d c3==cur_bytes.b3

@<Glob...@>=
@!cur_bytes:four_bytes; {a four-byte accumulator}
@!zero_bytes:four_bytes; {four bytes all zero}

@ @<Set init...@>=
zero_bytes.b0:=0; zero_bytes.b1:=0; zero_bytes.b2:=0; zero_bytes.b3:=0;

@ Since the |get_four_bytes| routine is used very infrequently, no attempt
has been made to make it fast; we only want it to work.
This is no longer the case, but we hope that it is not too slow.

@p procedure get_four_bytes; {scans an unsigned constant and sets |four_bytes|}
var c:integer; {leading byte}
@!r:integer; {radix}
begin repeat get_next;
until cur_char<>" "; {skip the blanks before the type code}
r:=0; cur_bytes:=zero_bytes; {start with the accumulator zero}
if cur_char="H" then r:=16
else if cur_char="O" then r:=8
else if cur_char="D" then r:=10
else skip_error('Decimal ("D"), octal ("O") or hex ("H") value is needed here');
@.Decimal ("D"), octal ("O") or hex ("H")...@>
if r>0 then begin
  repeat get_next;
  until cur_char<>" "; {skip the blanks after the type code}
  while ((cur_char>="0")and(cur_char<="9"))or@|
      ((cur_char>="A")and(cur_char<="F")) do
    @<Multiply by |r|, add |cur_char-"0"|, and |get_next|@>;
  end;
end;

function get_integer:integer; {scans an integer property value}
var @!a:integer; {accumulator}
begin get_four_bytes;
a:=c0;
if a>=@"80 then a:=a-@"100;
get_integer:=(a*@"1000000)+(c1*@"10000)+(c2*@"100)+c3;
end;

@ @<Multiply by |r|...@>=
begin if cur_char>="A" then cur_char:=cur_char+"0"+10-"A";
if cur_char>="0"+r then skip_error('Illegal digit')
@.Illegal digit@>
else begin
  c:=c3*r+cur_char-"0"; c3:=c mod 256;@/
  c:=c2*r+c div 256; c2:=c mod 256;@/
  c:=c1*r+c div 256; c1:=c mod 256;@/
  c:=c0*r+c div 256;
  if c<256 then c0:=c
  else begin
    cur_bytes:=zero_bytes;
    if r=8 then
      skip_error('Sorry, the maximum octal value is O 37777777777')
@.Sorry, the maximum...@>
    else if r=10 then
      skip_error('Sorry, the maximum decimal value is D 4294967295')
    else skip_error('Sorry, the maximum hex value is H FFFFFFFF');
    end;
  get_next;
  end;
end

@ The remaining scanning routine is the most interesting. It scans a real
constant and returns the nearest |fix_word| approximation to that constant.
A |fix_word| is a 32-bit integer that represents a real value that
has been multiplied by $2^{20}$. Since \.{PLtoTF} restricts the magnitude
of reals to 2048, the |fix_word| will have a magnitude less than $2^{31}$.

@d unity==@'4000000 {$2^{20}$, the |fix_word| 1.0}

@<Types...@>=
@!fix_word=integer; {a scaled real value with 20 bits of fraction}
@!unsigned_integer=integer;

@ When a real value is desired, we might as well treat `\.D' and `\.R'
formats as if they were identical.

@p function get_fix:fix_word; {scans a real property value}
var negative:boolean; {was there a minus sign?}
@!acc:integer; {an accumulator}
@!int_part:integer; {the integer part}
@!j:0..7; {the number of decimal places stored}
begin repeat get_next;
until cur_char<>" "; {skip the blanks before the type code}
negative:=false; acc:=0; {start with the accumulators zero}
if (cur_char<>"R")and(cur_char<>"D") then
  skip_error('An "R" or "D" value is needed here')
@.An "R" or "D" ... needed here@>
else  begin @<Scan the blanks and/or signs after the type code@>;
  while (cur_char>="0") and (cur_char<="9") do
    @<Multiply by 10, add |cur_char-"0"|, and |get_next|@>;
  int_part:=acc; acc:=0;
  if cur_char="." then @<Scan the fraction part and put it in |acc|@>;
  if (acc>=unity)and(int_part=2047) then
    skip_error('Real constants must be less than 2048')
@.Real constants must be...@>
  else acc:=int_part*unity+acc;
  end;
if negative then get_fix:=-acc@+else get_fix:=acc;
end;

@ @<Scan the blanks...@>=
repeat get_next;
if cur_char="-" then
  begin cur_char:=" "; negative:=not negative;
  end
else if cur_char="+" then cur_char:=" ";
until cur_char<>" "

@ @<Multiply by 10...@>=
begin acc:=acc*10+cur_char-"0";
if acc>=2048 then
  begin skip_error('Real constants must be less than 2048');
@.Real constants must be...@>
  acc:=0; cur_char:=" ";
  end
else get_next;
end

@ To scan the fraction $.d_1d_2\ldots\,$, we keep track of up to seven
of the digits $d_j$. A correct result is obtained if we first compute
$f^\prime=\lfloor 2^{21}(d_1\ldots d_j)/10^j\rfloor$, after which
$f=\lfloor(f^\prime+1)/2\rfloor$. It is possible to have $f=1.0$.

@<Glob...@>=
@!fraction_digits:array[1..7] of integer; {$2^{21}$ times $d_j$}

@ @<Scan the frac...@>=
begin j:=0; get_next;
while (cur_char>="0")and(cur_char<="9") do
  begin if j<7 then
    begin incr(j); fraction_digits[j]:=@'10000000*(cur_char-"0");
    end;
  get_next;
  end;
acc:=0;
while j>0 do
  begin acc:=fraction_digits[j]+(acc div 10); decr(j);
  end;
acc:=(acc+10) div 20;
end

@* Storing the property values.
When property values have been found, they are squirreled away in a bunch
of arrays. The header information is unpacked into bytes in an array
called |header_bytes|. The ligature/kerning program is stored in an array
of type |four_bytes|.
Another |four_bytes| array holds the specifications of extensible characters.
The kerns and parameters are stored in separate arrays of |fix_word| values.

Instead of storing the design size in the header array, we will keep it
in a |fix_word| variable until the last minute. The number of units in the
design size is also kept in a |fix_word|.

@<Glob...@>=
@!header_bytes:array[header_index] of byte; {the header block}
@!header_ptr:header_index; {the number of header bytes in use}
@!design_size:fix_word; {the design size}
@!design_units:fix_word; {reciprocal of the scaling factor}
@!seven_bit_safe_flag:boolean; {does the file claim to be seven-bit-safe?}
@!lig_kern:array[0..max_lig_steps] of four_bytes; {the ligature program}
@!nl:unsigned_integer; {the number of ligature/kern instructions so far}
@!min_nl:unsigned_integer; {the final value of |nl| must be at least this}
@!kern:array[0..max_kerns] of fix_word; {the distinct kerning amounts}
@!nk:0..max_kerns; {the number of entries of |kern|}
@!exten:array[char_type] of four_bytes; {extensible character specs}
@!ne:xchar_type; {the number of extensible characters}
@!param:array[1..max_param_words] of fix_word; {\.{FONTDIMEN} parameters}
@!np:0..max_param_words; {the largest parameter set nonzero}
@!check_sum_specified:boolean; {did the user name the check sum?}
@!bchar:xchar_type; {the right boundary character, or 256 if unspecified}
@!font_dir:integer; {font direction}

@ @<Types...@>=
@!char_type=0..max_char;
@!xchar_type=0..xmax_char;
@!xxchar_type=0..xxmax_char;
@!header_index=0..max_header_bytes;
@!indx=xxchar_type;

@ @<Local...@>=
@!d:header_index; {an index into |header_bytes|}

@ We start by setting up the default values.

@d check_sum_loc=0
@d design_size_loc=4
@d coding_scheme_loc=8
@d family_loc=coding_scheme_loc+40
@d seven_flag_loc=family_loc+20
@d face_loc=seven_flag_loc+3

@<Set init...@>=
for d:=0 to 18*4-1 do header_bytes[d]:=0;
header_bytes[8]:=11; header_bytes[9]:="U";
header_bytes[10]:="N";
header_bytes[11]:="S";
header_bytes[12]:="P";
header_bytes[13]:="E";
header_bytes[14]:="C";
header_bytes[15]:="I";
header_bytes[16]:="F";
header_bytes[17]:="I";
header_bytes[18]:="E";
header_bytes[19]:="D";
@.UNSPECIFIED@>
for d:=family_loc to family_loc+11 do header_bytes[d]:=header_bytes[d-40];
design_size:=10*unity; design_units:=unity; seven_bit_safe_flag:=false;@/
header_ptr:=18*4; nl:=0; min_nl:=0; nk:=0; ne:=0; np:=0;@/
check_sum_specified:=false; bchar:=xmax_char;
font_dir:=0;

@ Most of the dimensions, however, go into the |memory| array. There are
at most |max_char+2| widths, |max_char+2| heights, |max_char+2| depths,
and |max_char+2| italic corrections,
since the value 0 is required but it need not be used. So |memory| has room
for |4*max_char+8| entries, each of which is a |fix_word|.  An auxiliary table called
|link| is used to link these words together in linear lists, so that
sorting and other operations can be done conveniently.

We also add four ``list head'' words to the |memory| and |link| arrays;
these are in locations |width| through |italic|, i.e., 1 through 4.
For example, |link[height]| points to the smallest element in
the sorted list of distinct heights that have appeared so far, and
|memory[height]| is the number of distinct heights.

@<Types...@>=
@!pointer=0..mem_size; {an index into memory}

@ The arrays |char_wd|, |char_ht|, |char_dp|, and |char_ic| contain
pointers to the |memory| array entries where the corresponding dimensions
appear. Two other arrays, |char_tag| and |char_remainder|, hold
the other information that \.{TFM} files pack into a |char_info_word|.

@d no_tag=0 {vanilla character}
@d lig_tag=1 {character has a ligature/kerning program}
@d list_tag=2 {character has a successor in a charlist}
@d ext_tag=3 {character is extensible}
@d bchar_label==char_remainder[xmax_char]
  {beginning of ligature program for left boundary}

@<Glob...@>=
@!memory:array[pointer] of fix_word; {character dimensions and kerns}
@!mem_ptr:pointer; {largest |memory| word in use}
@!link:array[pointer] of pointer; {to make lists of |memory| items}
@!char_wd:array[char_type] of pointer; {pointers to the widths}
@!char_ht:array[char_type] of pointer; {pointers to the heights}
@!char_dp:array[char_type] of pointer; {pointers to the depths}
@!char_ic:array[char_type] of pointer; {pointers to italic corrections}
@!char_tag:array[char_type] of no_tag..ext_tag; {character tags}
@!char_remainder:array[xchar_type] of xchar_type; {pointers to ligature labels,
  next larger characters, or extensible characters}
@!top_width,@!top_height,@!top_depth,@!top_italic:integer;

@ @<Local...@>=
@!c:integer; {runs through all character codes}

@ @<Set init...@>=
bchar_label:=xmax_label;
for c:=0 to max_char do
  begin char_wd[c]:=0; char_ht[c]:=0; char_dp[c]:=0; char_ic[c]:=0;@/
  char_tag[c]:=no_tag; char_remainder[c]:=0;
  end;
memory[0]:=@'17777777777; {an ``infinite'' element at the end of the lists}
memory[width]:=0; link[width]:=0; {width list is empty}
memory[height]:=0; link[height]:=0; {height list is empty}
memory[depth]:=0; link[depth]:=0; {depth list is empty}
memory[italic]:=0; link[italic]:=0; {italic list is empty}
mem_ptr:=italic;

@ As an example of these data structures, let us consider the simple
routine that inserts a potentially new element into one of the dimension
lists. The first parameter indicates the list head (i.e., |h=width| for
the width list, etc.); the second parameter is the value that is to be
inserted into the list if it is not already present.  The procedure
returns the value of the location where the dimension appears in |memory|.
The fact that |memory[0]| is larger than any legal dimension makes the
algorithm particularly short.

We do have to handle two somewhat subtle situations. A width of zero must be
put into the list, so that a zero-width character in the font will not appear
to be nonexistent (i.e., so that its |char_wd| index will not be zero), but
this does not need to be done for heights, depths, or italic corrections.
Furthermore, it is necessary to test for memory overflow even though we
have provided room for the maximum number of different dimensions in any
legal font, since the \.{PL} file might foolishly give any number of
different sizes to the same character.

@p function sort_in(@!h:pointer;@!d:fix_word):pointer; {inserts into list}
var p:pointer; {the current node of interest}
begin if (d=0)and(h<>width) then sort_in:=0
else begin p:=h;
  while d>=memory[link[p]] do p:=link[p];
  if (d=memory[p])and(p<>h) then sort_in:=p
  else if mem_ptr=mem_size then
    begin err_print('Memory overflow: too many widths, etc');
@.Memory overflow...@>
    print_ln('Congratulations! It''s hard to make this error.');
    sort_in:=p;
    end
  else  begin incr(mem_ptr); memory[mem_ptr]:=d;
    link[mem_ptr]:=link[p]; link[p]:=mem_ptr; incr(memory[h]);
    sort_in:=mem_ptr;
    end;
  end;
end;

@ When these lists of dimensions are eventually written to the \.{OFM}
file, we may have to do some rounding of values, because the \.{OFM} file
allows at most 65536 widths, 256 heights, 256 depths, and 256 italic
corrections. The following procedure takes a given list head |h| and a
given dimension |d|, and returns the minimum $m$ such that the elements of
the list can be covered by $m$ intervals of width $d$.  It also sets
|next_d| to the smallest value $d^\prime>d$ such that the covering found
by this procedure would be different.  In particular, if $d=0$ it computes
the number of elements of the list, and sets |next_d| to the smallest
distance between two list elements. (The covering by intervals of width
|next_d| is not guaranteed to have fewer than $m$ elements, but in practice
this seems to happen most of the time.)

@<Glob...@>=
@!next_d:fix_word; {the next larger interval that is worth trying}

@ Once again we can make good use of the fact that |memory[0]| is ``infinite.''

@p function min_cover(@!h:pointer;@!d:fix_word):integer;
var p:pointer; {the current node of interest}
@!l:fix_word; {the least element covered by the current interval}
@!m:integer; {the current size of the cover being generated}
begin m:=0; p:=link[h]; next_d:=memory[0];
while p<>0 do
  begin incr(m); l:=memory[p];
  while memory[link[p]]<=l+d do p:=link[p];
  p:=link[p];
  if memory[p]-l<next_d then next_d:=memory[p]-l;
  end;
min_cover:=m;
end;

@ The following procedure uses |min_cover| to determine the smallest $d$
such that a given list can be covered with at most a given number of
intervals.

@p function shorten(@!h:pointer;m:integer):fix_word; {finds best way to round}
var d:fix_word; {the current trial interval length}
@!k:integer; {the size of a minimum cover}
begin if memory[h]>m then begin
  excess:=memory[h]-m;
  k:=min_cover(h,0); d:=next_d; {now the answer is at least |d|}
  repeat d:=d+d; k:=min_cover(h,d);
  until k<=m; {first we ascend rapidly until finding the range}
  d:=d div 2; k:=min_cover(h,d); {now we run through the feasible steps}
  while k>m do
    begin d:=next_d; k:=min_cover(h,d);
    end;
  shorten:=d;
  end
else shorten:=0;
end;

@ When we are nearly ready to output the \.{TFM} file, we will set
|index[p]:=k| if the dimension in |memory[p]| is being rounded to the
|k|th element of its list.

@<Glob...@>=
@!index:array[pointer] of byte;
@!excess:byte; {number of words to remove, if list is being shortened}

@ Here is the procedure that sets the |index| values. It also shortens
the list so that there is only one element per covering interval;
the remaining elements are the midpoints of their clusters.

@p procedure set_indices(@!h:pointer;@!d:fix_word); {reduces and indexes a list}
var p:pointer; {the current node of interest}
@!q:pointer; {trails one step behind |p|}
@!m:byte; {index number of nodes in the current interval}
@!l:fix_word; {least value in the current interval}
begin q:=h; p:=link[q]; m:=0;
while p<>0 do
  begin incr(m); l:=memory[p]; index[p]:=m;
  while memory[link[p]]<=l+d do
    begin p:=link[p]; index[p]:=m; decr(excess);
    if excess=0 then d:=0;
    end;
  link[q]:=p; memory[p]:=l+(memory[p]-l) div 2; q:=p; p:=link[p];
  end;
memory[h]:=m;
end;

@* The input phase.
We're ready now to read and parse the \.{PL} file, storing property
values as we go.

@<Glob...@>=
@!c:integer; {the current character or byte being processed}
@!cprime:char_type; {Processing for several characters together}
@!crange:char_type; {ditto}

@ @<Read all the input@>=
cur_char:=" ";
repeat while cur_char=" " do get_next;
if cur_char="(" then @<Read a font property value@>
else if (cur_char=")")and not input_has_ended then
  begin err_print('Extra right parenthesis');
  incr(loc); cur_char:=" ";
  end
@.Extra right parenthesis@>
else if not input_has_ended then junk_error;
until input_has_ended

@ The |junk_error| routine just referred to is called when something
appears in the forbidden area between properties of a property list.

@p procedure junk_error; {gets past no man's land}
begin err_print('There''s junk here that is not in parentheses');
@.There's junk here...@>
skip_to_paren;
end;

@ For each font property, we are supposed to read the data from the
left parenthesis that is the current value of |cur_char| to the right
parenthesis that matches it in the input. The main complication is
to recover with reasonable grace from various error conditions that might arise.

@<Read a font property value@>=
begin get_name;
if cur_code=comment_code then skip_to_end_of_item
else if cur_code>char_repeat_code then
  flush_error('This property name doesn''t belong on the outer level')
@.This property name doesn't belong...@>
else  begin @<Read the font property value specified by |cur_code|@>;
  finish_the_property;
  end;
end

@ @<Read the font property value spec...@>=
case cur_code of
check_sum_code: begin check_sum_specified:=true; read_four_bytes(check_sum_loc);
  end;
design_size_code: @<Read the design size@>;
design_units_code: @<Read the design units@>;
coding_scheme_code: read_BCPL(coding_scheme_loc,40);
family_code: read_BCPL(family_loc,20);
face_code: begin c:=get_byte; if c>255 then
  begin err_print('FACE clipped to 255'); c:=255; end;
  header_bytes[face_loc]:=c;
  end;
seven_bit_safe_flag_code: @<Read the seven-bit-safe flag@>;
header_code: @<Read an indexed header word@>;
font_dimen_code: @<Read font parameter list@>;
lig_table_code: read_lig_kern;
boundary_char_code: bchar:=get_byte;
character_code: read_char_info;
ofm_level_code:    @<Read OFM level code@>;
font_dir_code:     @<Read font direction code@>;
n_font_dir_code:   @<Read natural font direction code@>;
char_repeat_code:  read_repeated_character_info;
font_rule_code:    read_font_rule_list;
font_glue_code:    read_font_glue_list;
font_penalty_code: read_font_penalty_list;
font_mvalue_code:  read_font_mvalue_list;
font_fvalue_code:  read_font_fvalue_list;
font_ivalue_code:  read_font_ivalue_list;
end

@ The |case| statement just given makes use of two subroutines that we
haven't defined yet. The first of these puts a 32-bit octal quantity
into four specified bytes of the header block.

@p procedure read_four_bytes(l:header_index);
begin get_four_bytes;
header_bytes[l]:=c0;
header_bytes[l+1]:=c1;
header_bytes[l+2]:=c2;
header_bytes[l+3]:=c3;
end;

@ The second little procedure is used to scan a string and to store it in
the ``{\mc BCPL} format'' required by \.{TFM} files. The string is supposed
to contain at most |n| bytes, including the first byte (which holds the
length of the rest of the string).

@p procedure read_BCPL(l:header_index;n:byte);
var k:header_index;
begin k:=l;
while cur_char=" " do get_next;
while (cur_char<>"(")and(cur_char<>")") do
  begin if k<l+n then incr(k);
  if k<l+n then header_bytes[k]:=cur_char;
  get_next;
  end;
if k=l+n then
  begin err_print('String is too long; its first ',n-1:1,
@.String is too long...@>
    ' characters will be kept'); decr(k);
  end;
header_bytes[l]:=k-l;
while k<l+n-1 do {tidy up the remaining bytes by setting them to nulls}
  begin incr(k); header_bytes[k]:=0;
  end;
end;

@ @<Read the design size@>=
begin next_d:=get_fix;
if next_d<unity then
  err_print('The design size must be at least 1')
@.The design size must...@>
else design_size:=next_d;
end

@ @<Read the design units@>=
begin next_d:=get_fix;
if next_d<=0 then
  err_print('The number of units per design size must be positive')
@.The number of units...@>
else design_units:=next_d;
end

@ @<Read the seven-bit-safe...@>=
begin while cur_char=" " do get_next;
if cur_char="T" then seven_bit_safe_flag:=true
else if cur_char="F" then seven_bit_safe_flag:=false
else err_print('The flag value should be "TRUE" or "FALSE"');
@.The flag value should be...@>
skip_to_paren;
end

@ @<Read an indexed header word@>=
begin c:=get_byte;
if c<18 then skip_error('HEADER indices should be 18 or more')
@.HEADER indices...@>
else if 4*c+4>max_header_bytes then
  skip_error('This HEADER index is too big for my present table size')
@.This HEADER index is too big...@>
else  begin while header_ptr<4*c+4 do
    begin header_bytes[header_ptr]:=0; incr(header_ptr);
    end;
  read_four_bytes(4*c);
  end;
end

@ The remaining kinds of font property values that need to be read are
those that involve property lists on higher levels. Each of these has a
loop similar to the one that was used at level zero. Then we put the
right parenthesis back so that `|finish_the_property|' will be happy;
there is probably a more elegant way to do this.

@d finish_inner_property_list==begin decr(loc); incr(level); cur_char:=")";
  end

@<Read font parameter list@>=
begin while level=1 do
  begin while cur_char=" " do get_next;
  if cur_char="(" then @<Read a parameter value@>
  else if cur_char=")" then skip_to_end_of_item
  else junk_error;
  end;
finish_inner_property_list;
end

@ @<Read a parameter value@>=
begin get_name;
if cur_code=comment_code then skip_to_end_of_item
else if (cur_code<parameter_code)or(cur_code>=char_wd_code) then
  flush_error('This property name doesn''t belong in a FONTDIMEN list')
@.This property name doesn't belong...@>
else  begin if cur_code=parameter_code then c:=get_integer
  else c:=cur_code-parameter_code;
  if c<1 then flush_error('PARAMETER index must be at least 1')
@.PARAMETER index must be...@>
  else if c>max_param_words then
    flush_error('This PARAMETER index is too big for my present table size')
@.This PARAMETER index is too big...@>
  else  begin while np<c do
      begin incr(np); param[np]:=0;
      end;
    param[c]:=get_fix;
    finish_the_property;
    end;
  end;
end

@ @<Read ligature/kern list@>=
begin lk_step_ended:=false;
while level=1 do
  begin while cur_char=" " do get_next;
  if cur_char="(" then read_lig_kern_command
  else if cur_char=")" then skip_to_end_of_item
  else junk_error;
  end;
finish_inner_property_list;
end

@ @<Read a ligature/kern command@>=
begin get_name;
if cur_code=comment_code then skip_to_end_of_item
else if (cur_code<label_code)or(cur_code>ckrn_code) then
  flush_error('This property name doesn''t belong in a LIGTABLE list')
@.This property name doesn't belong...@>
else  begin case cur_code of
  label_code:@<Read a label step@>;
  stop_code:@<Read a stop step@>;
  skip_code:@<Read a skip step@>;
  krn_code:@<Read a kerning step@>;
  lig_code,lig_code+1,lig_code+2,lig_code+3,lig_code+5,lig_code+6,lig_code+7,
    lig_code+11:@<Read a ligature step@>;
  clabel_code:@<Read an extended label step@>;
  cpen_code:@<Read an extended penalty step@>;
  cglue_code:@<Read an extended glue step@>;
  cpenglue_code:@<Read an extended penalty/glue step@>;
  ckrn_code:@<Read an extended kern step@>;
  end; {there are no other cases |>=label_code| and |<=ckrn_code|}
  finish_the_property;
  end;
end

@ When a character is about to be tagged, we call the following
procedure so that an error message is given in case of multiple tags.

@p procedure check_tag(c:integer); {print error if |c| already tagged}
begin case char_tag[c] of
no_tag: do_nothing;
lig_tag: err_print('This character already appeared in a LIGTABLE LABEL');
@.This character already...@>
list_tag: err_print('This character already has a NEXTLARGER spec');
ext_tag: err_print('This character already has a VARCHAR spec');
end;
end;

@ @<Read a label step@>=
begin while cur_char=" " do get_next;
if cur_char="B" then
  begin bchar_label:=nl; skip_to_paren; {\.{LABEL BOUNDARYCHAR}}
  end
else begin backup; c:=get_byte;
  check_tag(c); char_tag[c]:=lig_tag; char_remainder[c]:=nl;
  end;
if min_nl<=nl then min_nl:=nl+1;
lk_step_ended:=false;
end

@ @d stop_flag=128 {value indicating `\.{STOP}' in a lig/kern program}
@d kern_flag=128 {op code for a kern step}

@<Globals...@>=
@!lk_step_ended:boolean;
  {was the last \.{LIGTABLE} property \.{LIG} or \.{KRN}?}
@!krn_ptr:0..max_kerns; {an index into |kern|}

@ @<Read a stop step@>=
if not lk_step_ended then
  err_print('STOP must follow LIG or KRN')
@.STOP must follow LIG or KRN@>
else begin lig_kern[nl-1].b0:=lig_kern[nl-1].b0 div 256 * 256 + stop_flag;
  lk_step_ended:=false;
  end

@ @<Read a skip step@>=
if not lk_step_ended then
  err_print('SKIP must follow LIG or KRN')
@.SKIP must follow LIG or KRN@>
else begin c:=get_byte;
  if c>=128 then err_print('Maximum SKIP amount is 127')
@.Maximum SKIP amount...@>
  else if nl+c>=max_lig_steps then
    err_print('Sorry, LIGTABLE too long for me to handle')
@.Sorry, LIGTABLE too long...@>
  else begin lig_kern[nl-1].b0:=c;
    if min_nl<=nl+c then min_nl:=nl+c+1;
    end;
  lk_step_ended:=false;
  end

@ @<Read a ligature step@>=
begin lig_kern[nl].b0:=0;
lig_kern[nl].b2:=cur_code-lig_code;
lig_kern[nl].b1:=get_byte;
lig_kern[nl].b3:=get_byte;
if nl>=max_lig_steps-1 then
  err_print('Sorry, LIGTABLE too long for me to handle')
@.Sorry, LIGTABLE too long...@>
else incr(nl);
lk_step_ended:=true;
end

@ @<Read a kerning step@>=
begin lig_kern[nl].b0:=0; lig_kern[nl].b1:=get_byte;
kern[nk]:=get_fix; krn_ptr:=0;
while kern[krn_ptr]<>kern[nk] do incr(krn_ptr);
if krn_ptr=nk then
  begin if nk<max_kerns then incr(nk)
  else  begin err_print('Sorry, too many different kerns for me to handle');
@.Sorry, too many different kerns...@>
    decr(krn_ptr);
    end;
  end;
if ofm_level=-1 then begin
  lig_kern[nl].b2:=kern_flag+(krn_ptr div 256);
  lig_kern[nl].b3:=krn_ptr mod 256;
  end
else begin
  lig_kern[nl].b2:=kern_flag+(krn_ptr div 65536);
  lig_kern[nl].b3:=krn_ptr mod 65536;
  end;
if nl>=max_lig_steps-1 then
  err_print('Sorry, LIGTABLE too long for me to handle')
@.Sorry, LIGTABLE too long...@>
else incr(nl);
lk_step_ended:=true;
end

@ @<Global...@>=
@!category_remainders:array[0..256] of integer;
@!ivalue_category,@!max_ivalue_category:integer;
@!glue_category,@!max_glue_category:integer;
@!penalty_category,@!max_penalty_category:integer;

@ @<Set init...@>=
for ivalue_category:=0 to 256 do begin
  category_remainders[ivalue_category]:=-1;
  end;
max_ivalue_category:=-1;
max_glue_category:=-1;
max_penalty_category:=-1;

@ @<Read an extended label step@>=
begin c:=get_byte;
category_remainders[c]:=nl;
if max_ivalue_category<c then max_ivalue_category:=c;
if min_nl<=nl then min_nl:=nl+1;
lk_step_ended:=false;
end

@ @<Read an extended penalty step@>=
begin lig_kern[nl].b0:=256; lig_kern[nl].b1:=get_byte;
lig_kern[nl].b2:=17;
penalty_category:=get_byte;
if max_penalty_category<penalty_category then
  max_penalty_category:=penalty_category;
lig_kern[nl].b3:=penalty_category;
if nl>=max_lig_steps-1 then
  err_print('Sorry, LIGTABLE too long for me to handle')
@.Sorry, LIGTABLE too long...@>
else incr(nl);
lk_step_ended:=true;
end

@ @<Read an extended glue step@>=
begin lig_kern[nl].b0:=256; lig_kern[nl].b1:=get_byte;
lig_kern[nl].b2:=18;
glue_category:=get_byte;
if max_glue_category<glue_category then
  max_glue_category:=glue_category;
lig_kern[nl].b3:=glue_category;
if nl>=max_lig_steps-1 then
  err_print('Sorry, LIGTABLE too long for me to handle')
@.Sorry, LIGTABLE too long...@>
else incr(nl);
lk_step_ended:=true;
end

@ @<Read an extended penalty/glue step@>=
begin lig_kern[nl].b0:=256; lig_kern[nl].b1:=get_byte;
lig_kern[nl].b2:=19;
penalty_category:=get_byte;
if max_penalty_category<penalty_category then
  max_penalty_category:=penalty_category;
glue_category:=get_byte;
if max_glue_category<glue_category then
  max_glue_category:=glue_category;
lig_kern[nl].b3:=penalty_category*256+glue_category;
if nl>=max_lig_steps-1 then
  err_print('Sorry, LIGTABLE too long for me to handle')
@.Sorry, LIGTABLE too long...@>
else incr(nl);
lk_step_ended:=true;
end

@ @<Read an extended kern step@>=
begin lig_kern[nl].b0:=256; lig_kern[nl].b1:=get_byte;
lig_kern[nl].b2:=20;
kern[nk]:=get_fix; krn_ptr:=0;
while kern[krn_ptr]<>kern[nk] do incr(krn_ptr);
if krn_ptr=nk then begin
  if nk<max_kerns then incr(nk)
  else begin
    err_print('Sorry, too many different kerns for me to handle');
@.Sorry, too many different kerns...@>
    decr(krn_ptr);
    end;
  end;
if krn_ptr>65535 then
  err_print('Sorry, too many different kerns for me to handle');
lig_kern[nl].b3:=krn_ptr;
if nl>=max_lig_steps-1 then
  err_print('Sorry, LIGTABLE too long for me to handle')
@.Sorry, LIGTABLE too long...@>
else incr(nl);
lk_step_ended:=true;
end

@ @<Globals...@>=
@!char_extended_tag:array [char_type] of boolean;

@ @<Set init...@>=
for c:=0 to max_char do
  char_extended_tag[c]:=false;

@ @<Finish up the extended font stuff@>=
begin
if max_penalty_category>0 then begin
  if nkp=0 then
    err_print('No PENALTY table')
  else if npp[0]<max_penalty_category then
    err_print('Not enough PENALTY entries');
  end;
if max_glue_category>0 then begin
  if nkg=0 then
    err_print('No GLUE table')
  else if npg[0]<max_glue_category then
    err_print('Not enough GLUE entries');
  end;
if max_ivalue_category>0 then begin
  if nki=0 then
    err_print('No IVALUE table')
  else if npi[0]<max_ivalue_category then
    err_print('Not enough IVALUE entries')
  else begin
    for c:=0 to max_char do begin
      if (char_wd[c]<>0) then begin
        for j:=0 to max_ivalue_category do
          if char_table[c,0]=j then begin
            if category_remainders[j]<>-1 then begin
              if char_tag[c]<>0 then
                err_print('Character already has a tag')
              else begin
                char_extended_tag[c]:=true;
        	char_remainder[c]:=category_remainders[j];
                end;
              end;
            end;
        end;
      end;
    end;
  end;
end

@ @<Global...@>=
tables_read:boolean;

@ @<Set init...@>=
tables_read:=false;

@ Finally we come to the part of \.{PLtoTF}'s input mechanism
that is used most, the processing of individual character data.

@<Read character info list@>=
begin if not tables_read then
  begin compute_new_header_ofm;
  tables_read:=true;
  end;
c:=get_byte; {read the character code that is being specified}
@<Print |c| in hex notation@>;
while level=1 do
  begin while cur_char=" " do get_next;
  if cur_char="(" then read_character_property
  else if cur_char=")" then skip_to_end_of_item
  else junk_error;
  end;
if char_wd[c]=0 then char_wd[c]:=sort_in(width,0); {legitimatize |c|}
finish_inner_property_list;
end

@ @<Globals...@>=
@!char_original:array [0..max_char] of integer;
@!char_repeats:array [0..max_char] of integer;
@!diff:boolean;
@!needed_space,@!extra_bytes:integer;

@ @<Set init...@>=
for ch_entry:=0 to max_char do begin
  char_original[ch_entry]:=ch_entry;
  char_repeats[ch_entry]:=0;
  end;

@ @<Read repeated character info@>=
begin
if not tables_read then begin
  @<Compute the new header information for OFM files@>;
  tables_read:=true;
  end;
c:=get_byte; {read the character code that is being specified}
@<Print |c| in hex notation@>;
crange:=get_byte; {read how many characters are being defined}
if (crange<0) then begin
  err_print('Character ranges must be positive');
  crange:=0;
  end;
if ((c+crange)>max_char) then begin
  err_print('Character range too large');
  crange:=0;
  end;
print('-'); print_hex(c+crange); incr(chars_on_line);
while level=1 do begin
  while cur_char=" " do get_next;
  if cur_char="(" then read_character_property
  else if cur_char=")" then skip_to_end_of_item
  else junk_error;
  end;
if char_wd[c]=0 then char_wd[c]:=sort_in(width,0); {legitimatize |c|}
finish_inner_property_list;
cprime:=c;
for c:=(cprime+1) to (cprime+crange) do begin
  char_wd[c]:=char_wd[cprime];
  char_ht[c]:=char_ht[cprime];
  char_dp[c]:=char_dp[cprime];
  char_ic[c]:=char_ic[cprime];
  char_tag[c]:=char_tag[cprime];
  char_remainder[c]:=char_remainder[cprime];
  for tab:=0 to (nki+nkf+nkm+nkr+nkg+nkp-1) do begin
    char_table[c,tab]:= char_table[cprime,tab];
    end;
  end;
end

@ Tables for character parameters

@d char_param_tables==8

@<Globals...@>=
@!char_table:array [0..max_char,0..char_param_tables] of integer;
@!ch_table,@!ch_entry:integer;
@!temp_value:integer;

@ @<Set init...@>=
for c:=0 to max_char do
  for ch_table:=0 to char_param_tables do
    char_table[c,ch_table]:=0;

@ @d get_char_table_entry(#)==
  begin ch_table:=get_integer;
  if (ch_table<0)or(ch_table>=#) then
    flush_error('Character property index out of range')
@.Character property index...@>
  else  begin get_char_table_entry_end
@d get_char_table_entry_end(#)==
    ch_table:=ch_table+#;
    if ch_table>char_param_tables then
      flush_error('Character property exceeds table size')
@.Character property exceeds...@>
    else  begin
      if ch_table>npc then npc:=ch_table;
      char_table[c,ch_table]:=get_integer;
      end;
    end;
  end

@<Read a character property@>=
begin get_name;
if cur_code=comment_code then skip_to_end_of_item
else if (cur_code<char_wd_code)or(cur_code>var_char_code) then
  flush_error('This property name doesn''t belong in a CHARACTER list')
@.This property name doesn't belong...@>
else  begin case cur_code of
  char_wd_code:char_wd[c]:=sort_in(width,get_fix);
  char_ht_code:char_ht[c]:=sort_in(height,get_fix);
  char_dp_code:char_dp[c]:=sort_in(depth,get_fix);
  char_ic_code:char_ic[c]:=sort_in(italic,get_fix);
  sec_width_code,
  sec_height_code,
  sec_depth_code,
  sec_italic_code,
  accent_code,
  prim_top_axis_code,
  prim_top_axis_bis_code,
  prim_bot_axis_code,
  prim_bot_axis_bis_code,
  prim_mid_hor_code,
  prim_mid_vert_code,
  prim_base_slant_code,
  sec_top_axis_code,
  sec_top_axis_bis_code,
  sec_bot_axis_code,
  sec_bot_axis_bis_code,
  sec_mid_hor_code,
  sec_mid_vert_code,
  sec_base_slant_code:temp_value:=get_fix;
  next_larger_code:begin check_tag(c); char_tag[c]:=list_tag;
    char_remainder[c]:=get_byte;
    end;
  var_char_code:@<Read an extensible recipe for |c|@>;
  char_ivalue_code:  get_char_table_entry(nki)(0);
  char_fvalue_code:  get_char_table_entry(nkf)(nki);
  char_mvalue_code:  get_char_table_entry(nkm)(nki+nkf);
  char_rule_code:    get_char_table_entry(nkr)(nki+nkf+nkm);
  char_glue_code:    get_char_table_entry(nkg)(nki+nkf+nkm+nkr);
  char_penalty_code: get_char_table_entry(nkp)(nki+nkf+nkm+nkr+nkg);
  end;@/
  finish_the_property;
  end;
end

@ @<Read an extensible r...@>=
begin if ne=xmax_char then
  err_print('Sorry, too many VARCHAR specs')
@.Sorry, too many VARCHAR specs@>
else  begin check_tag(c); char_tag[c]:=ext_tag; char_remainder[c]:=ne;@/
  exten[ne]:=zero_bytes;
  while level=2 do
    begin while cur_char=" " do get_next;
    if cur_char="(" then @<Read an extensible piece@>
    else if cur_char=")" then skip_to_end_of_item
    else junk_error;
    end;
  incr(ne);
  finish_inner_property_list;
  end;
end

@ @<Read an extensible p...@>=
begin get_name;
if cur_code=comment_code then skip_to_end_of_item
else if (cur_code<var_char_code+1)or(cur_code>var_char_code+4) then
  flush_error('This property name doesn''t belong in a VARCHAR list')
@.This property name doesn't belong...@>
else  begin case cur_code-(var_char_code+1) of
  0:exten[ne].b0:=get_byte;
  1:exten[ne].b1:=get_byte;
  2:exten[ne].b2:=get_byte;
  3:exten[ne].b3:=get_byte;
  end;@/
  finish_the_property;
  end;
end

@ The input routine is now complete except for the following code,
which prints a progress report as the file is being read.

@<Glob...@>=
@!HEX: packed array [1..16] of char;

@ @<Set init...@>=
HEX:='0123456789ABCDEF';@/

@ The array |dig| will hold a sequence of digits to be output.

@<Glob...@>=
@!dig:array[0..32] of integer;

@ Here, in fact, is a procedure that prints
|dig[j-1]|$\,\ldots\,$|dig[0]|, given $j>0$.

@p procedure print_digs(j:integer); {prints |j| digits}
begin repeat decr(j); print(HEX[1+dig[j]]);
until j=0;
end;


@ The |print_number| procedure indicates how |print_digs| can be used.
This procedure can print in octal, decimal or hex notation.

@d print_hex(#)==print_number(#,16)
@d print_octal(#)==print_number(#,8)
@d print_decimal(#)==print_number(#,10)

@p procedure print_number(c:integer; form:integer); {prints value of |c|}
var j:0..32; {index into |dig|}
begin
j:=0;
if (c<0) then begin
   print_ln('Internal error: print_number (negative value)');
   c:=0
   end;
if form=8 then
   print('''') {an apostrophe indicates the octal notation}
else if form=16 then
   print('"')  { a double apostrophe indicates the hexadecimal notation}
else if form<>10 then begin
   print_ln('Internal error: print_number');
   form:=10
   end;
while (c>0) or (j=0) do begin
  dig[j]:=c mod form; c:=c div form;
  j:=j+1;
  end;
print_digs(j);
end;

@ @<Print |c| in hex...@>=
begin if chars_on_line>=8 then
  begin print_ln(' '); chars_on_line:=1;
  end
else  begin if chars_on_line>0 then print(' ');
  incr(chars_on_line);
  end;
print_hex(c); {progress report}
end

@* The checking and massaging phase.
Once the whole \.{PL} file has been read in, we must check it for consistency
and correct any errors. This process consists mainly of running through
the characters that exist and seeing if they refer to characters that
don't exist. We also compute the true value of |seven_unsafe|; we make sure
that the charlists and ligature programs contain no loops; and we
shorten the lists of widths, heights, depths, and italic corrections,
if necessary, to keep from exceeding the required maximum sizes.

@<Glob...@>=
@!seven_unsafe:boolean; {do seven-bit characters generate eight-bit ones?}

@ @<Correct and check the information@>=
if nl>0 then @<Make sure the ligature/kerning program ends appropriately@>;
seven_unsafe:=false;
for c:=0 to max_char do if char_wd[c]<>0 then
    @<For all characters |g| generated by |c|,
    make sure that |char_wd[g]| is nonzero, and
    set |seven_unsafe| if |c<128<=g|@>;
if bchar_label<xmax_label then
  begin c:=xmax_char; @<Check ligature program of |c|@>;
  end;
if seven_bit_safe_flag and seven_unsafe then
  print_ln('The font is not really seven-bit-safe!');
@.The font is not...safe@>
@<Check for infinite ligature loops@>;
@<Doublecheck the lig/kern commands and the extensible recipes@>;
finish_extended_font;
for c:=0 to max_char do
  @<Make sure that |c| is not the largest element of a charlist cycle@>;
@<Put the width, height, depth, and italic lists into final form@>

@ The checking that we need in several places is accomplished by three
macros that are only slightly tricky.

@d existence_tail(#)==begin char_wd[g]:=sort_in(width,0);
    print(#,' '); print_hex(c);
    print_ln(' had no CHARACTER spec.');
    end;
  end
@d check_existence_and_safety(#)==begin g:=#;
  if (g>=128)and(c<128) then seven_unsafe:=true;
  if char_wd[g]=0 then existence_tail
@d check_existence(#)==begin g:=#;
  if char_wd[g]=0 then existence_tail

@<For all characters |g| generated by |c|...@>=
case char_tag[c] of
no_tag: do_nothing;
lig_tag: @<Check ligature program of |c|@>;
list_tag: check_existence_and_safety(char_remainder[c])
  ('The character NEXTLARGER than');
@.The character NEXTLARGER...@>
ext_tag:@<Check the pieces of |exten[c]|@>;
end

@ @<Check the pieces...@>=
begin if exten[char_remainder[c]].b0>0 then
  check_existence_and_safety(exten[char_remainder[c]].b0)
    ('TOP piece of character');
@.TOP piece of character...@>
if exten[char_remainder[c]].b1>0 then
  check_existence_and_safety(exten[char_remainder[c]].b1)
    ('MID piece of character');
@.MID piece of character...@>
if exten[char_remainder[c]].b2>0 then
  check_existence_and_safety(exten[char_remainder[c]].b2)
    ('BOT piece of character');
@.BOT piece of character...@>
check_existence_and_safety(exten[char_remainder[c]].b3)
    ('REP piece of character');
@.REP piece of character...@>
end

@ @<Make sure that |c| is not the largest element of a charlist cycle@>=
if char_tag[c]=list_tag then
  begin g:=char_remainder[c];
  while (g<c)and(char_tag[g]=list_tag) do g:=char_remainder[g];
  if g=c then
    begin char_tag[c]:=no_tag;
    print('A cycle of NEXTLARGER characters has been broken at ');
@.A cycle of NEXTLARGER...@>
    print_hex(c); print_ln('.');
    end;
  end

@ @<Glob...@>=
@!delta:fix_word; {size of the intervals needed for rounding}

@ @d round_message(#)==if delta>0 then print_ln('I had to round some ',
@.I had to round...@>
  #,'s by ',(((delta+1) div 2)/@'4000000):1:7,' units.')

@<Put the width, height, depth, and italic lists into final form@>=
case ofm_level of
  -1: begin
    top_width:=255; top_depth:=15; top_height:=15; top_italic:=63;
    end;
  0: begin
    top_width:=65535; top_depth:=255; top_height:=255; top_italic:=255;
    end;
  1: begin
    top_width:=65535; top_depth:=255; top_height:=255; top_italic:=255;
    end;
  end;
delta:=shorten(width,top_width); set_indices(width,delta);
  round_message('width');@/
delta:=shorten(height,top_height); set_indices(height,delta);
  round_message('height');@/
delta:=shorten(depth,top_depth); set_indices(depth,delta);
  round_message('depth');@/
delta:=shorten(italic,top_italic); set_indices(italic,delta);
  round_message('italic correction');

@ @d clear_lig_kern_entry== {make an unconditional \.{STOP}}
  lig_kern[nl].b0:=255; lig_kern[nl].b1:=0;
  lig_kern[nl].b2:=0; lig_kern[nl].b3:=0

@<Make sure the ligature/kerning program ends...@>=
begin if bchar_label<xmax_label then {make room for it}
  begin clear_lig_kern_entry; incr(nl);
  end; {|bchar_label| will be stored later}
while min_nl>nl do
  begin clear_lig_kern_entry; incr(nl);
  end;
if (lig_kern[nl-1].b0 mod 256)=0 then
   lig_kern[nl-1].b0:=lig_kern[nl-1].b0 div 256 * 256 + stop_flag;
end

@ It's not trivial to check for infinite loops generated by repeated
insertion of ligature characters. But fortunately there is a nice
algorithm for such testing, copied here from the program \.{TFtoPL}
where it is explained further.

@d simple=0 {$f(x,y)=z$}
@d left_z=1 {$f(x,y)=f(z,y)$}
@d right_z=2 {$f(x,y)=f(x,z)$}
@d both_z=3 {$f(x,y)=f(f(x,z),y)$}
@d pending=4 {$f(x,y)$ is being evaluated}


@ @<Glo...@>=
@!lig_ptr:0..max_lig_steps; {an index into |lig_kern|}
@!hash:array[0..hash_size] of integer64;
@!class:array[0..hash_size] of simple..pending;
@!lig_z:array[0..hash_size] of xxchar_type;
@!hash_ptr:0..hash_size; {the number of nonzero entries in |hash|}
@!hash_list:array[0..hash_size] of 0..hash_size; {list of those nonzero entries}
@!h,@!hh:0..hash_size; {indices into the hash table}
@!tt:indx; {temporary register}
@!x_lig_cycle,@!y_lig_cycle:xchar_type; {problematic ligature pair}

@ @<Set init...@>=
hash_ptr:=0; y_lig_cycle:=xmax_char;
for k:=0 to hash_size do hash[k]:=0;

@ @d lig_exam==lig_kern[lig_ptr].b1
@d lig_gen==lig_kern[lig_ptr].b3

@<Check lig...@>=
begin lig_ptr:=char_remainder[c];
if lig_kern[lig_ptr].b0<256 then
begin
repeat if hash_input(lig_ptr,c) then
  begin if lig_kern[lig_ptr].b2<kern_flag then
    begin if lig_exam<>bchar then
      check_existence(lig_exam)('LIG character examined by');
@.LIG character examined...@>
    check_existence(lig_gen)('LIG character generated by');
@.LIG character generated...@>
    if lig_gen>=128 then if(c<128)or(c=bchar) then
      if(lig_exam<128)or(lig_exam=bchar) then seven_unsafe:=true;
    end
  else if lig_exam<>bchar then
    check_existence(lig_exam)('KRN character examined by');
@.KRN character examined...@>
  end;
if lig_kern[lig_ptr].b0>=stop_flag then lig_ptr:=nl
else lig_ptr:=lig_ptr+1+lig_kern[lig_ptr].b0;
until lig_ptr>=nl;
end;
end

@ The |hash_input| procedure is copied from \.{TFtoPL}, but it is made
into a boolean function that returns |false| if the ligature command
was masked by a previous one.

@p function hash_input(@!p,@!c:indx):boolean;
 {enter data for character |c| and command in location |p|, unless it isn't new}
label 30; {go here for a quick exit}
var @!cc:simple..both_z; {class of data being entered}
@!zz:char_type; {function value or ligature character being entered}
@!y:char_type; {the character after the cursor}
@!key:integer64; {value to be stored in |hash|}
@!t64:integer64; {temporary register for swapping}
@!t:integer; {temporary register for swapping}
begin if hash_ptr=hash_size then
  begin hash_input:=false; goto 30;@+end;
@<Compute the command parameters |y|, |cc|, and |zz|@>;
key:=int64cast(xmax_char)*c+y+1; h:=(hash_mult*key) mod hash_size;
while hash[h]>0 do
  begin if hash[h]<=key then
    begin if hash[h]=key then
      begin hash_input:=false; goto 30; {unused ligature command}
      end;
    t64:=hash[h]; hash[h]:=key; key:=t64; {do ordered-hash-table insertion}
    t:=class[h]; class[h]:=cc; cc:=t; {namely, do a swap}
    t:=lig_z[h]; lig_z[h]:=zz; zz:=t;
    end;
  if h>0 then decr(h)@+else h:=hash_size;
  end;
hash[h]:=key; class[h]:=cc; lig_z[h]:=zz;
incr(hash_ptr); hash_list[hash_ptr]:=h;
hash_input:=true;
30:end;

@ @<Compute the command param...@>=
y:=lig_kern[p].b1; t:=lig_kern[p].b2; cc:=simple;
zz:=lig_kern[p].b3;
if t>=kern_flag then zz:=y
else begin case t of
  0,6:do_nothing; {\.{LIG},\.{/LIG>}}
  5,11:zz:=y; {\.{LIG/>}, \.{/LIG/>>}}
  1,7:cc:=left_z; {\.{LIG/}, \.{/LIG/>}}
  2:cc:=right_z; {\.{/LIG}}
  3:cc:=both_z; {\.{/LIG/}}
  end; {there are no other cases}
  end

@ (More good stuff from \.{TFtoPL}.)

@p function f(@!h:integer64;@!x,@!y:indx):indx; forward;@t\2@>
  {compute $f$ for arguments known to be in |hash[h]|}
function eval(@!x,@!y:indx):indx; {compute $f(x,y)$ with hashtable lookup}
var @!key:integer64; {value sought in hash table}
begin key:=int64cast(xmax_char)*x+y+1; h:=(hash_mult*key) mod hash_size;
while hash[h]>key do
  if h>0 then decr(h)@+else h:=hash_size;
if hash[h]<key then eval:=y {not in ordered hash table}
else eval:=f(h,x,y);
end;

@ Pascal's beastly convention for |forward| declarations prevents us from
saying |function f(h:integer64;x,y:indx):indx| here.

@p function f;
begin case class[h] of
simple: do_nothing;
left_z: begin class[h]:=pending; lig_z[h]:=eval(lig_z[h],y); class[h]:=simple;
  end;
right_z: begin class[h]:=pending; lig_z[h]:=eval(x,lig_z[h]); class[h]:=simple;
  end;
both_z: begin class[h]:=pending; lig_z[h]:=eval(eval(x,lig_z[h]),y);
  class[h]:=simple;
  end;
pending: begin x_lig_cycle:=x; y_lig_cycle:=y; lig_z[h]:=xxmax_char; class[h]:=simple;
  end; {the value |xxmax_char| will break all cycles, since it's not in |hash|}
end; {there are no other cases}
f:=lig_z[h];
end;

@ @<Check for infinite...@>=
if hash_ptr<hash_size then for hh:=1 to hash_ptr do
  begin tt:=hash_list[hh];
  if class[tt]>simple then {make sure $f$ is well defined}
  tt:=f(tt,(hash[tt]-1)div xmax_char,(hash[tt]-1)mod xmax_char);
  end;
if(hash_ptr=hash_size)or(y_lig_cycle<xmax_char) then
  begin if hash_ptr<hash_size then
    begin print('Infinite ligature loop starting with ');
@.Infinite ligature loop...@>
    if x_lig_cycle=xmax_char then print('boundary')@+else print_hex(x_lig_cycle);
    print(' and '); print_hex(y_lig_cycle); print_ln('!');
    end
  else print_ln('Sorry, I haven''t room for so many ligature/kern pairs!');
@.Sorry, I haven't room...@>
  print_ln('All ligatures will be cleared.');
  for c:=0 to max_char do if char_tag[c]=lig_tag then
    begin char_tag[c]:=no_tag; char_remainder[c]:=0;
    end;
  nl:=0; bchar:=xmax_char; bchar_label:=xmax_label;
  end

@ The lig/kern program may still contain references to nonexistent characters,
if parts of that program are never used. Similarly, there may be extensible
characters that are never used, because they were overridden by
\.{NEXTLARGER}, say. This would produce an invalid \.{TFM} file; so we
must fix such errors.

@d double_check_tail(#)==@t\1@>if char_wd[0]=0
      then char_wd[0]:=sort_in(width,0);
    print('Unused ',#,' refers to nonexistent character ');
    print_hex(c); print_ln('!');
    end;
  end
@d double_check_lig(#)==begin c:=lig_kern[lig_ptr].#;
  if char_wd[c]=0 then if c<>bchar then
    begin lig_kern[lig_ptr].#:=0; double_check_tail
@d double_check_ext(#)==begin c:=exten[g].#;
  if c>0 then if char_wd[c]=0 then
    begin exten[g].#:=0; double_check_tail
@d double_check_rep(#)==begin c:=exten[g].#;
  if char_wd[c]=0 then
    begin exten[g].#:=0; double_check_tail

@<Doublecheck...@>=
if nl>0 then for lig_ptr:=0 to nl-1 do
  if (lig_kern[lig_ptr].b0 div 256)=0 then begin
  if lig_kern[lig_ptr].b2<kern_flag then
    begin if lig_kern[lig_ptr].b0<255 then
      begin double_check_lig(b1)('LIG step'); double_check_lig(b3)('LIG step');
      end;
    end
  else double_check_lig(b1)('KRN step');
  end;
@.Unused LIG step...@>
@.Unused KRN step...@>
if ne>0 then for g:=0 to ne-1 do
  begin double_check_ext(b0)('VARCHAR TOP');
  double_check_ext(b1)('VARCHAR MID');
  double_check_ext(b2)('VARCHAR BOT');
  double_check_rep(b3)('VARCHAR REP');
@.Unused VARCHAR...@>
  end

@* The output phase.
Now that we know how to get all of the font data correctly stored in
\.{PLtoTF}'s memory, it only remains to write the answers out.

First of all, it is convenient to have an abbreviation for output to the
\.{TFM} file:

@d out(#)==write(tfm_file,#)

@p procedure out_int(@!x:integer); {output a possibly negative value}
begin if x<0 then  begin
  x:=x+@"40000000;
  x:=x+@"40000000;
  out((x div @"1000000)+@"80);
  end
else out(x div @"1000000);
out((x mod @"1000000) div @"10000);
out((x mod @"10000) div @"100);
out(x mod @"100);
end;

@ The general plan for producing \.{TFM} files is long but simple:

@<Do the font metric output@>=
compute_subfile_sizes;
output_subfile_sizes;
@<Output the header block@>;
output_new_information_ofm;
output_character_info;
@<Output the dimensions themselves@>;
@<Output the ligature/kern program@>;
@<Output the extensible character recipes@>;
@<Output the parameters@>

@ A \.{TFM} file begins with 12 numbers that tell how big its subfiles are.
We already know most of these numbers; for example, the number of distinct
widths is |memory[width]+1|, where the $+1$ accounts for the zero width that
is always supposed to be present. But we still should compute the beginning
and ending character codes (|bc| and |ec|), the number of header words (|lh|),
and the total number of words in the \.{TFM} file (|lf|).

@<Gl...@>=
@!bc:char_type; {the smallest character code in the font}
@!ec:char_type; {the largest character code in the font}
@!lh:char_type; {the number of words in the header block}
@!lf:unsigned_integer; {the number of words in the entire \.{TFM} file}
@!not_found:boolean; {has a font character been found?}
@!temp_width:fix_word; {width being used to compute a check sum}
@!ncw,@!nco,@!npc:integer;

@ @<Set init...@>=
npc:=-1;

@ It might turn out that no characters exist at all. But \.{PLtoTF} keeps
going and writes the \.{TFM} anyway. In this case |ec| will be~0 and |bc|
will be~1.

@<Compute the subfile sizes@>=
lh:=header_ptr div 4;@/
not_found:=true; bc:=0;
if (ofm_level=-1) then ec:=255 @+ else ec:=max_char;
while not_found do
  if (char_wd[bc]>0)or(bc=ec) then not_found:=false
  else incr(bc);
not_found:=true;
while not_found do
  if (char_wd[ec]>0)or(ec=0) then not_found:=false
  else decr(ec);
if bc>ec then bc:=1;
incr(memory[width]); incr(memory[height]); incr(memory[depth]);
incr(memory[italic]);@/
@<Compute the ligature/kern program offset@>;
case ofm_level of
  -1: begin
    lf:=6+lh+(ec-bc+1)+memory[width]+memory[height]+memory[depth]+
    memory[italic]+nl+lk_offset+nk+ne+np;
    end;
  0: begin
    lf:=14+lh+2*(ec-bc+1)+memory[width]+memory[height]+memory[depth]+
    memory[italic]+2*nl+lk_offset+nk+2*ne+np;
    end;
  1: begin
    @<Compute the character info size@>;
    lf:=29+lh+ncw+memory[width]+memory[height]+memory[depth]+
    memory[italic]+2*(nl+lk_offset)+nk+2*ne+np+
    nki+nwi+nkf+nwf+nkm+nwm+nkr+nwr+nkg+nwg+nkp+nwp;
    nco:=29+lh+nki+nwi+nkf+nwf+nkm+nwm+nkr+nwr+nkg+nwg+nkp+nwp;
    end;
  end;

@ @d out_size(#)==out((#) div 256); out((#) mod 256)
  @d out_integer(#)==out((#) div @"1000000);
                     out(((#) mod @"1000000) div @"10000);
                     out(((#) mod @"10000) div @"100);
                     out((#) mod @"100)

@<Output the subfile sizes@>=
case ofm_level of
  -1: begin
    out_size(lf); out_size(lh); out_size(bc); out_size(ec);
    out_size(memory[width]); out_size(memory[height]);
    out_size(memory[depth]); out_size(memory[italic]);
    out_size(nl+lk_offset); out_size(nk); out_size(ne); out_size(np);
    end;
  0: begin
    out_integer(0);
    out_integer(lf); out_integer(lh); out_integer(bc); out_integer(ec);
    out_integer(memory[width]); out_integer(memory[height]);
    out_integer(memory[depth]); out_integer(memory[italic]);
    out_integer(nl+lk_offset); out_integer(nk);
    out_integer(ne); out_integer(np); out_integer(font_dir);
    end;
  1: begin
    out_integer(1);
    out_integer(lf); out_integer(lh);
    out_integer(bc); out_integer(ec);
    out_integer(memory[width]); out_integer(memory[height]);
    out_integer(memory[depth]); out_integer(memory[italic]);
    out_integer(nl+lk_offset); out_integer(nk);
    out_integer(ne); out_integer(np); out_integer(font_dir);
    out_integer(nco); out_integer(ncw); out_integer(npc);
    out_integer(nki); out_integer(nwi); out_integer(nkf); out_integer(nwf);
    out_integer(nkm); out_integer(nwm); out_integer(nkr); out_integer(nwr);
    out_integer(nkg); out_integer(nwg); out_integer(nkp); out_integer(nwp);
    end;
  end;

@ The routines that follow need a few temporary variables of different types.

@<Gl...@>=
@!j:0..max_header_bytes; {index into |header_bytes|}
@!p:pointer; {index into |memory|}
@!q:width..italic; {runs through the list heads for dimensions}
@!par_ptr:0..max_param_words; {runs through the parameters}

@ The header block follows the subfile sizes. The necessary information all
appears in |header_bytes|, except that the design size and the seven-bit-safe
flag must still be set.

@<Output the header block@>=
if not check_sum_specified then @<Compute the check sum@>;
header_bytes[design_size_loc]:=design_size div @'100000000;
  {this works since |design_size>0|}
header_bytes[design_size_loc+1]:=(design_size div @'200000) mod 256;
header_bytes[design_size_loc+2]:=(design_size div 256) mod 256;
header_bytes[design_size_loc+3]:=design_size  mod 256;
if (not seven_unsafe)and(ofm_level=-1) then header_bytes[seven_flag_loc]:=128;
for j:=0 to header_ptr-1 do out(header_bytes[j]);

@ @<Compute the check sum@>=
begin c0:=bc; c1:=ec; c2:=bc; c3:=ec;
for c:=bc to ec do if char_wd[c]>0 then
  begin temp_width:=memory[char_wd[c]];
  if design_units<>unity then
    temp_width:=round((temp_width/design_units)*1048576.0);
  temp_width:=temp_width + (c+4)*@'20000000; {this should be positive}
  c0:=(c0+c0+temp_width) mod 255;
  c1:=(c1+c1+temp_width) mod 253;
  c2:=(c2+c2+temp_width) mod 251;
  c3:=(c3+c3+temp_width) mod 247;
  end;
header_bytes[check_sum_loc]:=c0;
header_bytes[check_sum_loc+1]:=c1;
header_bytes[check_sum_loc+2]:=c2;
header_bytes[check_sum_loc+3]:=c3;
end

@ @<Global...@>=
@!tab:integer;

@
@<Compute the character info size@>=
if ofm_level=1 then begin
  ncw:=0;
  incr(npc);
  needed_space:=(12+npc*2) div 4;
  extra_bytes:=(needed_space*4) - (10+npc*2);
  for c:=bc to ec do begin
    if char_original[c]=c then begin
      cprime:=c+1;
      diff:=false;
      while (not diff) and (cprime<=ec) do begin
        if index[char_wd[c]]<>index[char_wd[cprime]] then diff:=true;
        if index[char_ht[c]]<>index[char_ht[cprime]] then diff:=true;
        if index[char_dp[c]]<>index[char_dp[cprime]] then diff:=true;
        if index[char_ic[c]]<>index[char_ic[cprime]] then diff:=true;
        if char_tag[c]<>char_tag[cprime] then diff:=true;
        if char_remainder[c]<>char_remainder[cprime] then diff:=true;
        for tab:=0 to npc-1 do begin
          if char_table[c,tab]<>char_table[cprime,tab] then diff:=true;
          end;
        if not diff then begin
          char_original[cprime]:=c;
          cprime:=cprime+1;
          end;
        end;
      if cprime>(c+1) then begin
        char_repeats[c]:=cprime-c-1;
        end;
      ncw:=ncw+needed_space;
      end;
    end;
  end;

@ The next block contains packed |char_info|.

@<Output the character info@>=
index[0]:=0;
for c:=bc to ec do
case ofm_level of
  -1: begin
    out(index[char_wd[c]]);
    out(index[char_ht[c]]*16+index[char_dp[c]]);
    out(index[char_ic[c]]*4+char_tag[c]);
    out(char_remainder[c]);
    end;
  0: begin
    out(index[char_wd[c]] div 256); out(index[char_wd[c]] mod 256);
    out(index[char_ht[c]]); out(index[char_dp[c]]);
    out(index[char_ic[c]]); out(char_tag[c]);
    out(char_remainder[c] div 256); out(char_remainder[c] mod 256);
    end;
  1: begin
    if c=char_original[c] then begin
      out(index[char_wd[c]] div 256); out(index[char_wd[c]] mod 256);
      out(index[char_ht[c]]); out(index[char_dp[c]]);
      out(index[char_ic[c]]);
      tab:=char_tag[c];
      if char_extended_tag[c] then begin
        tab:=5;
        end;
      out(tab);
      out(char_remainder[c] div 256); out(char_remainder[c] mod 256);
      out_size(char_repeats[c]);
      for tab:=0 to npc-1 do begin
        out(char_table[c,tab] div 256); out(char_table[c,tab] mod 256);
        end;
      for tab:=1 to extra_bytes do begin
        out(0);
        end;
      end;
    end;
  end;

@ When a scaled quantity is output, we may need to divide it by |design_units|.
The following subroutine takes care of this, using floating point arithmetic
only if |design_units<>1.0|.

@p procedure out_scaled(x:fix_word); {outputs a scaled |fix_word|}
var @!n:byte; {the first byte after the sign}
@!m:0..65535; {the two least significant bytes}
begin if abs(x/design_units)>=16.0 then
  begin print_ln('The relative dimension ',x/@'4000000:1:3,
    ' is too large.');
@.The relative dimension...@>
  print('  (Must be less than 16*designsize');
  if design_units<>unity then print(' =',design_units/@'200000:1:3,
      ' designunits');
  print_ln(')'); x:=0;
  end;
if design_units<>unity then x:=round((x/design_units)*1048576.0);
if x<0 then
  begin out(255); x:=x+@'100000000;
  if x<=0 then x:=1;
  end
else begin out(0);
  if x>=@'100000000 then x:=@'77777777;
  end;
n:=x div @'200000; m:=x mod @'200000;
out(n); out(m div 256); out(m mod 256);
end;

@ We have output the packed indices for individual characters.
The scaled widths, heights, depths, and italic corrections are next.

@<Output the dimensions themselves@>=
for q:=width to italic do
  begin out(0); out(0); out(0); out(0); {output the zero word}
  p:=link[q]; {head of list}
  while p>0 do
    begin out_scaled(memory[p]);
    p:=link[p];
    end;
  end;

@ One embarrassing problem remains: The ligature/kern program might be very
long, but the starting addresses in |char_remainder| can be at most~65535.
Therefore we need to output some indirect address information; we want to
compute |lk_offset| so that addition of |lk_offset| to all remainders makes
all but |lk_offset| distinct remainders less than~65535.

For this we need a sorted table of all relevant remainders.

@<Glob...@>=
@!label_table:array[xchar_type] of record
  @!rr: -1..xmax_label; {sorted label values}
  @!cc: integer; {associated characters}
  end;
@!label_ptr:xchar_type; {index of highest entry in |label_table|}
@!sort_ptr:xchar_type; {index into |label_table|}
@!lk_offset:xchar_type; {smallest offset value that might work}
@!t:0..xmax_label; {label value that is being redirected}
@!extra_loc_needed:boolean; {do we need a special word for |bchar|?}

@ @<Compute the ligature/kern program offset@>=
@<Insert all labels into |label_table|@>;
if bchar<xmax_char then
  begin extra_loc_needed:=true; lk_offset:=1;
  end
else begin extra_loc_needed:=false; lk_offset:=0;
  end;
@<Find the minimum |lk_offset| and adjust all remainders@>;
if bchar_label<xmax_label then begin
  if ofm_level=-1 then begin
    lig_kern[nl-1].b2:=(bchar_label+lk_offset)div 256;
    lig_kern[nl-1].b3:=(bchar_label+lk_offset)mod 256;
    end
  else begin
    lig_kern[nl-1].b2:=(bchar_label+lk_offset)div 65536;
    lig_kern[nl-1].b3:=(bchar_label+lk_offset)mod 65536;
    end
  end

@ @<Insert all labels...@>=
label_ptr:=0; label_table[0].rr:=-1; {sentinel}
for c:=bc to ec do if char_tag[c]=lig_tag then
  begin sort_ptr:=label_ptr; {there's a hole at position |sort_ptr+1|}
  while label_table[sort_ptr].rr>char_remainder[c] do
    begin label_table[sort_ptr+1]:=label_table[sort_ptr];
    decr(sort_ptr); {move the hole}
    end;
  label_table[sort_ptr+1].cc:=c;
  label_table[sort_ptr+1].rr:=char_remainder[c];
  incr(label_ptr);
  end

@ @<Find the minimum |lk_offset| and adjust all remainders@>=
begin sort_ptr:=label_ptr; {the largest unallocated label}
if ofm_level=-1 then begin
  if label_table[sort_ptr].rr+lk_offset > 255 then begin
    lk_offset:=0; extra_loc_needed:=false; {location 0 can do double duty}
    repeat char_remainder[label_table[sort_ptr].cc]:=lk_offset;
    while label_table[sort_ptr-1].rr=label_table[sort_ptr].rr do begin
      decr(sort_ptr); char_remainder[label_table[sort_ptr].cc]:=lk_offset;
      end;
    incr(lk_offset); decr(sort_ptr);
    until lk_offset+label_table[sort_ptr].rr<256;
      {N.B.: |lk_offset=256| satisfies this when |sort_ptr=0|}
    end;
  end
else begin
  if label_table[sort_ptr].rr+lk_offset > 65535 then begin
    lk_offset:=0; extra_loc_needed:=false; {location 0 can do double duty}
    repeat char_remainder[label_table[sort_ptr].cc]:=lk_offset;
    while label_table[sort_ptr-1].rr=label_table[sort_ptr].rr do begin
      decr(sort_ptr); char_remainder[label_table[sort_ptr].cc]:=lk_offset;
      end;
    incr(lk_offset); decr(sort_ptr);
    until lk_offset+label_table[sort_ptr].rr<65536;
      {N.B.: |lk_offset=65536| satisfies this when |sort_ptr=0|}
    end;
  end;
if lk_offset>0 then while sort_ptr>0 do
  begin char_remainder[label_table[sort_ptr].cc]:=
    char_remainder[label_table[sort_ptr].cc]+lk_offset;
  decr(sort_ptr);
  end;
end

@ @<Output the ligature/kern program@>=
if ofm_level=-1 then begin
  if extra_loc_needed then begin {|lk_offset=1|}
    out(255); out(bchar); out(0); out(0);
    end
  else for sort_ptr:=1 to lk_offset do begin {output the redirection specs}
    t:=label_table[label_ptr].rr;
    if bchar<256 then begin
      out(255); out(bchar);
      end
    else begin
      out(254); out(0);
      end;
    out_size(t+lk_offset);
    repeat decr(label_ptr); until label_table[label_ptr].rr<t;
    end;
  if nl>0 then for lig_ptr:=0 to nl-1 do begin
    out(lig_kern[lig_ptr].b0);
    out(lig_kern[lig_ptr].b1);
    out(lig_kern[lig_ptr].b2);
    out(lig_kern[lig_ptr].b3);
    end;
  if nk>0 then for krn_ptr:=0 to nk-1 do out_scaled(kern[krn_ptr])
  end
else begin
  if extra_loc_needed then {|lk_offset=1|} begin
    out_size(255); out_size(bchar); out_size(0); out_size(0);
    end
  else
    for sort_ptr:=1 to lk_offset do {output the redirection specs} begin
    t:=label_table[label_ptr].rr;
    if bchar<xmax_char then begin
      out_size(255); out_size(bchar);
      end
    else begin
      out_size(254); out_size(0);
      end;
    out_size((t+lk_offset) div 256);
    out_size((t+lk_offset) mod 256);
    repeat decr(label_ptr); until label_table[label_ptr].rr<t;
    end;
  if nl>0 then for lig_ptr:=0 to nl-1 do begin
    out_size(lig_kern[lig_ptr].b0);
    out_size(lig_kern[lig_ptr].b1);
    out_size(lig_kern[lig_ptr].b2);
    out_size(lig_kern[lig_ptr].b3);
    end;
  if nk>0 then for krn_ptr:=0 to nk-1 do out_scaled(kern[krn_ptr])
  end

@ @<Output the extensible character recipes@>=
if ofm_level=-1 then begin
  if ne>0 then for c:=0 to ne-1 do begin
    out(exten[c].b0);
    out(exten[c].b1);
    out(exten[c].b2);
    out(exten[c].b3);
    end;
  end
else begin
  if ne>0 then for c:=0 to ne-1 do begin
    out_size(exten[c].b0);
    out_size(exten[c].b1);
    out_size(exten[c].b2);
    out_size(exten[c].b3);
    end;
  end;

@ For our grand finale, we wind everything up by outputting the parameters.

@<Output the parameters@>=
for par_ptr:=1 to np do
  begin if par_ptr=1 then
    @<Output the slant (|param[1]|) without scaling@>
  else out_scaled(param[par_ptr]);
  end

@ @<Output the slant...@>=
begin if param[1]<0 then
  begin param[1]:=param[1]+@'10000000000;
  out((param[1] div @'100000000)+256-64);
  end
else out(param[1] div @'100000000);
out((param[1] div @'200000) mod 256);
out((param[1] div 256) mod 256);
out(param[1] mod 256);
end

@* The main program.
The routines sketched out so far need to be packaged into separate procedures,
on some systems, since some \PASCAL\ compilers place a strict limit on the
size of a routine. The packaging is done here in an attempt to avoid some
system-dependent changes.

@p procedure param_enter;
begin @<Enter the parameter names@>;
end;
@#
procedure name_enter; {enter all names and their equivalents}
begin @<Enter all of the names...@>;
param_enter;
end;
@#
procedure read_lig_kern;
var @!krn_ptr:0..max_kerns; {an index into |kern|}
@!c:integer; {runs through all character codes}
begin @<Read ligature/kern list@>;
end;
@#
procedure output_new_information_ofm;
begin @<Output the new information for OFM files@>;
end;
@#
procedure compute_new_header_ofm;
begin @<Compute the new header information for OFM files@>;
end;
@#
procedure finish_extended_font;
begin @<Finish up the extended font stuff@>;
end;
@#
procedure output_subfile_sizes;
begin @<Output the subfile sizes@>;
end;
@#
procedure compute_subfile_sizes;
begin @<Compute the subfile sizes@>;
end;
@#
procedure output_character_info;
begin @<Output the character info@>;
end;
@#
procedure read_font_rule_list;
begin @<Read font rule list@>;
end;
@#
procedure read_font_glue_list;
begin @<Read font glue list@>;
end;
@#
procedure read_font_penalty_list;
begin @<Read font penalty list@>;
end;
@#
procedure read_font_mvalue_list;
begin @<Read font mvalue list@>;
end;
@#
procedure read_font_fvalue_list;
begin @<Read font fvalue list@>;
end;
@#
procedure read_font_ivalue_list;
begin @<Read font ivalue list@>;
end;
@#
procedure read_repeated_character_info;
begin @<Read repeated character info@>;
end;
@#
procedure read_lig_kern_command;
begin @<Read a ligature/kern command@>;
end;
@#
procedure read_character_property;
begin @<Read a character property@>;
end;
@#
procedure read_char_info;
begin @<Read character info list@>;
end;
@#
procedure read_input;
var @!c:integer; {header or parameter index}
begin @<Read all the input@>;
end;
@#
procedure corr_and_check;
var @!c:integer; {runs through all character codes}
@!hh:0..hash_size; {an index into |hash_list|}
@!lig_ptr:0..max_lig_steps; {an index into |lig_kern|}
@!g:byte; {a character generated by the current character |c|}
begin @<Correct and check the information@>
end;

@ Here is where \.{PLtoTF} begins and ends.

@p begin initialize;@/
name_enter;@/
read_input; print('.');@/
corr_and_check;@/
@<Do the font metric output@>;
end.

@ @<Global...@>=
@!ofm_level:integer;

@ @<Set init...@>=
ofm_level:=-1; {Suppose that it is a TFM file}

@ @<Read OFM level code@>=
begin
ofm_level:=get_integer;
if (ofm_level<0) or (ofm_level>1) then begin
  flush_error('OFMLEVEL must be 0 or 1 -- 1 assumed');
  ofm_level:=1;
  end;
end

@ @<Read font direction code@>=
begin
font_dir:=-1;
repeat get_next;
until cur_char<>" ";
case cur_char of
  "T": begin get_next;
    if cur_char="L" then font_dir:=0
    else if cur_char="R" then font_dir:=2;
    end;
  "B": begin get_next;
    if cur_char="L" then font_dir:=4
    else if cur_char="R" then font_dir:=6;
    end;
  "R": begin get_next;
    if cur_char="T" then font_dir:=5
    else if cur_char="B" then font_dir:=7;
    end;
  "L": begin get_next;
    if cur_char="T" then font_dir:=1
    else if cur_char="B" then font_dir:=3;
    end;
  end;
while cur_char<>")" do get_next;
if font_dir = -1 then begin
  flush_error('FONTDIR must be valid direction, -- TL assumed');
  font_dir:=0;
  end;
end

@ @<Read natural font direction code@>=
begin
font_dir:=-1;
repeat get_next;
until cur_char<>" ";
case cur_char of
  "T": begin get_next;
    if cur_char="L" then font_dir:=8
    else if cur_char="R" then font_dir:=10;
    end;
  "B": begin get_next;
    if cur_char="L" then font_dir:=12
    else if cur_char="R" then font_dir:=14;
    end;
  "R": begin get_next;
    if cur_char="T" then font_dir:=13
    else if cur_char="B" then font_dir:=15;
    end;
  "L": begin get_next;
    if cur_char="T" then font_dir:=9
    else if cur_char="B" then font_dir:=11;
    end;
  end;
while cur_char<>")" do get_next;
if font_dir = -1 then begin
  flush_error('NFONTDIR must be valid direction, -- TL assumed');
  font_dir:=8;
  end;
end

@
Here are some general values for the various entries.
They can all be changed.

@d arrays_per_kind==20
@d entries_per_array==200

@ @<Constants...@>=
@!rule_arrays=arrays_per_kind;
@!rule_entries=entries_per_array;

@ @<Types...@>=
rule_array_type=0..rule_arrays;
rule_entry_type=0..rule_entries;
rule_node=
record
  rn_width:     fix_word;
  rn_height:    fix_word;
  rn_depth:     fix_word;
end;

@ @<Global...@>=
@!rules:array[rule_array_type,rule_entry_type] of rule_node;
@!npr:array[rule_array_type] of integer;
@!nkr:integer;
@!nwr:integer;
@!r_array:integer;
@!r_number:integer;

@ @<Set init...@>=
for r_array := 0 to rule_arrays do begin
  npr[r_array]:=0;
  @<Null out the rule@>;
  end;
nkr:=-1;

@ @<Read font rule list@>=
begin
if tables_read then
  flush_error('All parameter tables must appear before character info');
r_array:=get_integer;
if r_array>rule_arrays then
  flush_error('This FONTRULE table index is too big for my present size')
else if r_array<0 then
  flush_error('This FONTRULE index is negative')
else begin
  if r_array>nkr then nkr:=r_array;
  while level=1 do begin
    while cur_char=" " do get_next;
    if cur_char="(" then @<Read a rule@>
    else if cur_char=")" then skip_to_end_of_item
    else junk_error;
    end;
  finish_inner_property_list;
  end;
end

@ @<Read a rule@>=
begin
get_name;
if cur_code=comment_code then skip_to_end_of_item
else if cur_code<>rule_code then
  flush_error('This property name doesn''t belong in a FONTRULE list')
else begin
  r_number:=get_integer;
  if r_number>rule_entries then
    flush_error('This RULE index is too big for my present table size')
  else if r_number<0 then
    flush_error('This RULE index is negative')
  else begin
    while npr[r_array]<r_number do begin
      incr(npr[r_array]); @<Null out the rule@>;
      end;
    @<Read all of a rule's values@>;
    finish_the_property;
    end;
  end;
end

@ @<Null out the rule@>=
begin
rules[r_array,npr[r_array]].rn_width:=0;
rules[r_array,npr[r_array]].rn_depth:=0;
rules[r_array,npr[r_array]].rn_height:=0;
end

@ @<Read all of a rule's values@>=
begin
while level=2 do begin
  while cur_char=" " do get_next;
  if cur_char="(" then @<Read a single rule value@>
  else if cur_char=")" then skip_to_end_of_item
  else junk_error;
  end;
finish_inner_property_list;
end

@ @<Read a single rule value@>=
begin
get_name;
if cur_code=comment_code then skip_to_end_of_item
else if (cur_code<rule_width_code)or(cur_code>rule_depth_code) then
  flush_error('This property name doesn''t belong in a RULE list')
else begin
  case cur_code of
    rule_width_code:
      rules[r_array,r_number].rn_width:=get_fix;
    rule_height_code:
      rules[r_array,r_number].rn_height:=get_fix;
    rule_depth_code:
      rules[r_array,r_number].rn_depth:=get_fix;
    end;
  finish_the_property;
  end;
end

@ @<Header information for rules@>=
begin
nwr:=0;
for r_array := 0 to nkr do begin
  incr(npr[r_array]);
  nwr := nwr + 3*npr[r_array];
  end;
incr(nkr);
end

@ @<Output the rules@>=
begin
for r_array:= 0 to nkr-1 do
  for r_number:=0 to npr[r_array]-1 do begin
    out_scaled(rules[r_array,r_number].rn_width);
    out_scaled(rules[r_array,r_number].rn_height);
    out_scaled(rules[r_array,r_number].rn_depth);
    end;
end

@ @<Output the rule headers@>=
begin
for r_array:= 0 to nkr-1 do begin
  out_integer(npr[r_array]);
  end;
end

@ @<Constants...@>=
@!glue_arrays=arrays_per_kind;
@!glue_entries=entries_per_array;

@
@d t_normal==0
@d t_aleaders==1
@d t_cleaders==2
@d t_xleaders==3

@d o_unit==0
@d o_fi==1
@d o_fil==2
@d o_fill==3
@d o_filll==4

@d g_space==0
@d g_rule==1
@d g_char==2

@<Types...@>=
glue_array_type=0..glue_arrays;
glue_entry_type=0..glue_entries;
glue_node=
record
  gn_width:             fix_word;
  gn_stretch:           fix_word;
  gn_shrink:            fix_word;
  gn_type:              integer;
  gn_arg_type:          g_space..g_char;
  gn_stretch_order:     integer;
  gn_shrink_order:      integer;
  gn_argument:          integer;
end;

@ @<Global...@>=
@!glues:array[glue_array_type,glue_entry_type] of glue_node;
@!npg:array[glue_array_type] of integer;
@!nkg:integer;
@!nwg:integer;
@!g_array:integer;
@!g_byte:integer;
@!g_number:integer;

@ @<Set init...@>=
for g_array := 0 to glue_arrays do
begin
  npg[g_array]:=0;
  @<Null out the glue@>;
end;
nkg:=-1;

@ @<Read font glue list@>=
begin
if tables_read then
  flush_error('All parameter tables must appear before character info');
g_array:=get_integer;
if g_array>glue_arrays then
  flush_error('This FONTGLUE table index is too big for my present size')
else if g_array<0 then
  flush_error('This FONTGLUE index is negative')
else begin
  if g_array>nkg then nkg:=g_array;
  while level=1 do begin
    while cur_char=" " do get_next;
    if cur_char="(" then @<Read a glue@>
    else if cur_char=")" then skip_to_end_of_item
    else junk_error;
    end;
  finish_inner_property_list;
  end;
end

@ @<Read a glue@>=
begin
get_name;
if cur_code=comment_code then skip_to_end_of_item
else if cur_code<>glue_code then
  flush_error('This property name doesn''t belong in a FONTGLUE list')
else begin
  g_number:=get_integer;
  if g_number>glue_entries then
    flush_error('This GLUE index is too big for my present table size')
  else if g_number<0 then
    flush_error('This GLUE index is negative')
  else begin
    while npg[g_array]<g_number do begin
      incr(npg[g_array]); @<Null out the glue@>;
      end;
    @<Read all of a glue's values@>;
    finish_the_property;
    end;
  end;
end

@ @<Null out the glue@>=
begin
glues[g_array,npg[g_array]].gn_width:=0;
glues[g_array,npg[g_array]].gn_stretch:=0;
glues[g_array,npg[g_array]].gn_shrink:=0;
glues[g_array,npg[g_array]].gn_type:=0;
glues[g_array,npg[g_array]].gn_arg_type:=0;
glues[g_array,npg[g_array]].gn_stretch_order:=0;
glues[g_array,npg[g_array]].gn_shrink_order:=0;
glues[g_array,npg[g_array]].gn_argument:=0;
end

@ @<Read all of a glue's values@>=
begin
while level=2 do begin
  while cur_char=" " do get_next;
  if cur_char="(" then @<Read a single glue value@>
  else if cur_char=")" then skip_to_end_of_item
  else junk_error;
  end;
finish_inner_property_list;
end

@ @<Read a single glue value@>=
begin
get_name;
if cur_code=comment_code then skip_to_end_of_item
else if (cur_code<glue_type_code)or(cur_code>glue_rule_code) then
  flush_error('This property name doesn''t belong in a GLUE list')
else begin
  case cur_code of
    glue_width_code:
      glues[g_array,g_number].gn_width:=get_fix;
    glue_stretch_code:
      glues[g_array,g_number].gn_stretch:=get_fix;
    glue_shrink_code:
      glues[g_array,g_number].gn_shrink:=get_fix;
    glue_type_code: begin
      g_byte:=get_integer;
      if (g_byte<0) or (g_byte>3) then begin
        g_byte:=0;
        end;
      glues[g_array,g_number].gn_type:=g_byte;
      end;
    glue_stretch_order_code: begin
      g_byte:=get_integer;
      if (g_byte<0) or (g_byte>4) then begin
        g_byte:=0;
        end;
      glues[g_array,g_number].gn_stretch_order:=g_byte;
      end;
    glue_shrink_order_code: begin
      g_byte:=get_integer;
      if (g_byte<0) or (g_byte>4) then begin
        g_byte:=0;
        end;
      glues[g_array,g_number].gn_shrink_order:=g_byte;
      end;
    glue_char_code: begin
      glues[g_array,g_number].gn_argument:=get_integer;
      glues[g_array,g_number].gn_arg_type:=g_char;
      end;
    glue_rule_code: begin
      glues[g_array,g_number].gn_argument:=get_integer;
      glues[g_array,g_number].gn_arg_type:=g_rule;
      end;
    end;
  finish_the_property;
  end;
end

@ @<Header information for glues@>=
begin
nwg:=0;
for g_array := 0 to nkg do begin
  incr(npg[g_array]);
  nwg := nwg + 4*npg[g_array];
  end;
incr(nkg);
end

@ @<Output the glues@>=
begin
for g_array:= 0 to nkg-1 do
  for g_number:=0 to npg[g_array]-1 do begin
    g_byte:=glues[g_array,g_number].gn_type*16+
            glues[g_array,g_number].gn_arg_type;
    out(g_byte);
    g_byte:=glues[g_array,g_number].gn_stretch_order*16+
            glues[g_array,g_number].gn_shrink_order;
    out(g_byte);
    g_byte:=glues[g_array,g_number].gn_argument div 256;
    out(g_byte);
    g_byte:=glues[g_array,g_number].gn_argument mod 256;
    out(g_byte);
    out_scaled(glues[g_array,g_number].gn_width);
    out_scaled(glues[g_array,g_number].gn_stretch);
    out_scaled(glues[g_array,g_number].gn_shrink);
  end;
end

@ @<Output the glue headers@>=
begin
for g_array:= 0 to nkg-1 do begin
  out_integer(npg[g_array]);
  end;
end

@ @<Constants...@>=
@!penalty_arrays=arrays_per_kind;
@!penalty_entries=entries_per_array;

@ @<Types...@>=
penalty_array_type=0..penalty_arrays;
penalty_entry_type=0..penalty_entries;
penalty_node=
record
  pn_val: integer;
end;

@ @<Global...@>=
@!penalties:array[penalty_array_type,penalty_entry_type] of penalty_node;
@!npp:array[penalty_array_type] of integer;
@!nkp:integer;
@!nwp:integer;
@!p_array:integer;
@!p_number:integer;

@ @<Set init...@>=
for p_array := 0 to penalty_arrays do begin
  npp[p_array]:=0;
  @<Null out the penalty@>;
  end;
nkp:=-1;

@ @<Read font penalty list@>=
begin
if tables_read then
  flush_error('All parameter tables must appear before character info');
p_array:=get_integer;
if p_array>penalty_arrays then
  flush_error('This FONTPENALTY table index is too big for my present size')
else if p_array<0 then
  flush_error('This FONTPENALTY index is negative')
else begin
  if p_array>nkp then nkp:=p_array;
  while level=1 do begin
    while cur_char=" " do get_next;
    if cur_char="(" then @<Read a penalty@>
    else if cur_char=")" then skip_to_end_of_item
    else junk_error;
    end;
  finish_inner_property_list;
  end;
end

@ @<Read a penalty@>=
begin
get_name;
if cur_code=comment_code then skip_to_end_of_item
else if cur_code<>penalty_code then
  flush_error('This property name doesn''t belong in a FONTPENALTY list')
else begin
  p_number:=get_integer;
  if p_number>penalty_entries then
    flush_error('This PENALTY index is too big for my present table size')
  else if p_number<0 then
    flush_error('This PENALTY index is negative')
  else begin
    while npp[p_array]<p_number do begin
      incr(npp[p_array]); @<Null out the penalty@>;
      end;
    @<Read all of a penalty's values@>;
    finish_the_property;
    end;
  end;
end

@ @<Null out the penalty@>=
begin
penalties[p_array,npp[p_array]].pn_val:=0;
end

@ @<Read all of a penalty's values@>=
begin
while level=2 do begin
  while cur_char=" " do get_next;
  if cur_char="(" then @<Read a single penalty value@>
  else if cur_char=")" then skip_to_end_of_item
  else junk_error;
  end;
finish_inner_property_list;
end

@ @<Read a single penalty value@>=
begin
get_name;
if cur_code=comment_code then skip_to_end_of_item
else if cur_code<>penalty_val_code then
  flush_error('This property name doesn''t belong in a PENALTY list')
else  begin
  penalties[p_array,p_number].pn_val:=get_integer;
  finish_the_property;
  end;
end

@ @<Header information for penalties@>=
begin
nwp:=0;
for p_array := 0 to nkp do begin
  incr(npp[p_array]);
  nwp := nwp + npp[p_array];
  end;
incr(nkp);
end

@ @<Output the penalties@>=
begin
for p_array:= 0 to nkp-1 do
  for p_number:=0 to npp[p_array]-1 do begin
    out_int(penalties[p_array,p_number].pn_val);
    end;
end

@ @<Output the penalty headers@>=
begin
for p_array:= 0 to nkp-1 do begin
  out_integer(npp[p_array]);
  end;
end

@ @<Constants...@>=
@!mvalue_arrays=arrays_per_kind;
@!mvalue_entries=entries_per_array;

@ @<Types...@>=
mvalue_array_type=0..mvalue_arrays;
mvalue_entry_type=0..mvalue_entries;
mvalue_node=
record
  fn_val:     fix_word;
end;

@ @<Global...@>=
@!mvalues:array[mvalue_array_type,mvalue_entry_type] of mvalue_node;
@!npm:array[mvalue_array_type] of integer;
@!nkm:integer;
@!nwm:integer;
@!m_array:integer;
@!m_number:integer;

@ @<Set init...@>=
for m_array := 0 to mvalue_arrays do begin
  npm[m_array]:=0;
  @<Null out the mvalue@>;
  end;
nkm:=-1;

@ @<Read font mvalue list@>=
begin
if tables_read then
  flush_error('All parameter tables must appear before character info');
m_array:=get_integer;
if m_array>mvalue_arrays then
  flush_error('This FONTMVALUE table index is too big for my present size')
else if m_array<0 then
  flush_error('This FONTMVALUE index is negative')
else begin
  if m_array>nkm then nkm:=m_array;
  while level=1 do begin
    while cur_char=" " do get_next;
    if cur_char="(" then @<Read an mvalue@>
    else if cur_char=")" then skip_to_end_of_item
    else junk_error;
    end;
  finish_inner_property_list;
  end;
end

@ @<Read an mvalue@>=
begin
get_name;
if cur_code=comment_code then skip_to_end_of_item
else if cur_code<>mvalue_code then
  flush_error('This property name doesn''t belong in an FONTMVALUE list')
else begin
  m_number:=get_integer;
  if m_number>mvalue_entries then
    flush_error('This MVALUE index is too big for my present table size')
  else if m_number<0 then
    flush_error('This MVALUE index is negative')
  else begin
    while npm[m_array]<m_number do begin
      incr(npm[m_array]); @<Null out the mvalue@>;
      end;
    @<Read all of an mvalue's values@>;
    finish_the_property;
    end;
  end;
end

@ @<Null out the mvalue@>=
begin
mvalues[m_array,npm[m_array]].fn_val:=0;
end

@ @<Read all of an mvalue's values@>=
begin
while level=2 do begin
  while cur_char=" " do get_next;
  if cur_char="(" then @<Read a single mvalue value@>
  else if cur_char=")" then skip_to_end_of_item
  else junk_error;
  end;
finish_inner_property_list;
end

@ @<Read a single mvalue value@>=
begin
get_name;
if cur_code=comment_code then skip_to_end_of_item
else if cur_code<>mvalue_val_code then
  flush_error('This property name doesn''t belong in a MVALUE list')
else  begin
  mvalues[m_array,m_number].fn_val:=get_fix;
  finish_the_property;
  end;
end

@ @<Header information for mvalues@>=
begin
nwm:=0;
for m_array := 0 to nkm do begin
  incr(npm[m_array]);
  nwm := nwm + npm[m_array];
  end;
incr(nkm);
end

@ @<Output the mvalues@>=
begin
for m_array:= 0 to nkm-1 do
  for m_number:=0 to npm[m_array]-1 do begin
    out_scaled(mvalues[m_array,m_number].fn_val);
    end;
end

@ @<Output the mvalue headers@>=
begin
for m_array:= 0 to nkm-1 do begin
  out_integer(npm[m_array]);
  end;
end

@ @<Constants...@>=
@!fvalue_arrays=arrays_per_kind;
@!fvalue_entries=entries_per_array;

@ @<Types...@>=
fvalue_array_type=0..fvalue_arrays;
fvalue_entry_type=0..fvalue_entries;
fvalue_node=
record
  fn_val:     fix_word;
end;

@ @<Global...@>=
@!fvalues:array[fvalue_array_type,fvalue_entry_type] of fvalue_node;
@!npf:array[fvalue_array_type] of integer;
@!nkf:integer;
@!nwf:integer;
@!f_array:integer;
@!f_number:integer;

@ @<Set init...@>=
for f_array := 0 to fvalue_arrays do begin
  npf[f_array]:=0;
  @<Null out the fvalue@>;
  end;
nkf:=-1;

@ @<Read font fvalue list@>=
begin
if tables_read then
  flush_error('All parameter tables must appear before character info');
f_array:=get_integer;
if f_array>fvalue_arrays then
  flush_error('This FONTFVALUE table index is too big for my present size')
else if f_array<0 then
  flush_error('This FONTFVALUE index is negative')
else begin
  if f_array>nkf then nkf:=f_array;
  while level=1 do begin
    while cur_char=" " do get_next;
    if cur_char="(" then @<Read an fvalue@>
    else if cur_char=")" then skip_to_end_of_item
    else junk_error;
    end;
  finish_inner_property_list;
  end;
end

@ @<Read an fvalue@>=
begin
get_name;
if cur_code=comment_code then skip_to_end_of_item
else if cur_code<>fvalue_code then
  flush_error('This property name doesn''t belong in an FONTFVALUE list')
else begin
  f_number:=get_integer;
  if f_number>fvalue_entries then
    flush_error('This FVALUE index is too big for my present table size')
  else if f_number<0 then
    flush_error('This FVALUE index is negative')
  else begin
    while npf[f_array]<f_number do begin
      incr(npf[f_array]); @<Null out the fvalue@>;
      end;
    @<Read all of an fvalue's values@>;
    finish_the_property;
    end;
  end;
end

@ @<Null out the fvalue@>=
begin
fvalues[f_array,npf[f_array]].fn_val:=0;
end

@ @<Read all of an fvalue's values@>=
begin
while level=2 do begin
  while cur_char=" " do get_next;
  if cur_char="(" then @<Read a single fvalue value@>
  else if cur_char=")" then skip_to_end_of_item
  else junk_error;
  end;
finish_inner_property_list;
end

@ @<Read a single fvalue value@>=
begin
get_name;
if cur_code=comment_code then skip_to_end_of_item
else if cur_code<>fvalue_val_code then
  flush_error('This property name doesn''t belong in a FVALUE list')
else  begin
  fvalues[f_array,f_number].fn_val:=get_fix;
  finish_the_property;
  end;
end

@ @<Header information for fvalues@>=
begin
nwf:=0;
for f_array := 0 to nkf do begin
  incr(npf[f_array]);
  nwf := nwf + npf[f_array];
  end;
incr(nkf);
end

@ @<Output the fvalues@>=
begin
for f_array:= 0 to nkf-1 do
  for f_number:=0 to npf[f_array]-1 do begin
    out_scaled(fvalues[f_array,f_number].fn_val);
    end;
end

@ @<Output the fvalue headers@>=
begin
for f_array:= 0 to nkf-1 do begin
  out_integer(npf[f_array]);
  end;
end

@ @<Constants...@>=
@!ivalue_arrays=arrays_per_kind;
@!ivalue_entries=entries_per_array;

@ @<Types...@>=
ivalue_array_type=0..ivalue_arrays;
ivalue_entry_type=0..ivalue_entries;
ivalue_node=
record
  in_val:	integer;
end;

@ @<Global...@>=
@!ivalues:array[ivalue_array_type,ivalue_entry_type] of ivalue_node;
@!npi:array[ivalue_array_type] of integer;
@!font_i_array:boolean;
@!nki:integer;
@!nwi:integer;
@!i_array:integer;
@!i_number:integer;

@ @<Set init...@>=
for i_array := 0 to ivalue_arrays do begin
  npi[i_array]:=0;
  @<Null out the ivalue@>;
  end;
nki:=-1;

@ @<Read font ivalue list@>=
begin
if tables_read then
  flush_error('All parameter tables must appear before character info');
i_array:=get_integer;
if i_array>ivalue_arrays then
  flush_error('This FONTIVALUE table index is too big for my present size')
else if i_array<0 then
  flush_error('This FONTIVALUE index is negative')
else begin
  if i_array>nki then nki:=i_array;
  while level=1 do begin
    while cur_char=" " do get_next;
    if cur_char="(" then @<Read an ivalue@>
    else if cur_char=")" then skip_to_end_of_item
    else junk_error;
    end;
  finish_inner_property_list;
  end;
end

@ @<Read an ivalue@>=
begin
get_name;
if cur_code=comment_code then skip_to_end_of_item
else if cur_code<>ivalue_code then
  flush_error('This property name doesn''t belong in an FONTIVALUE list')
else begin
  i_number:=get_integer;
  if i_number>ivalue_entries then
    flush_error('This IVALUE index is too big for my present table size')
  else if i_number<0 then
    flush_error('This IVALUE index is negative')
  else begin
    while npi[i_array]<i_number do begin
      incr(npi[i_array]); @<Null out the ivalue@>;
      end;
    @<Read all of an ivalue's values@>;
    finish_the_property;
    end;
  end;
end

@ @<Null out the ivalue@>=
begin
ivalues[i_array,npi[i_array]].in_val:=0;
end

@ @<Read all of an ivalue's values@>=
begin
while level=2 do begin
  while cur_char=" " do get_next;
  if cur_char="(" then @<Read a single ivalue value@>
  else if cur_char=")" then skip_to_end_of_item
  else junk_error;
  end;
finish_inner_property_list;
end

@ @<Read a single ivalue value@>=
begin
get_name;
if cur_code=comment_code then skip_to_end_of_item
else if cur_code<>ivalue_val_code then
  flush_error('This property name doesn''t belong in a IVALUE list')
else  begin
  ivalues[i_array,i_number].in_val:=get_integer;
  finish_the_property;
  end;
end

@ @<Header information for ivalues@>=
begin
nwi:=0;
for i_array := 0 to nki do begin
  incr(npi[i_array]);
  nwi := nwi + npi[i_array];
  end;
incr(nki);
end

@ @<Output the ivalues@>=
begin
for i_array:= 0 to nki-1 do
  for i_number:=0 to npi[i_array]-1 do begin
    out_int(ivalues[i_array,i_number].in_val);
    end;
end

@ @<Output the ivalue headers@>=
begin
for i_array:= 0 to nki-1 do begin
  out_integer(npi[i_array]);
  end;
end

@ @<Compute the new header information for OFM files@>=
begin
@<Header information for ivalues@>;
@<Header information for fvalues@>;
@<Header information for mvalues@>;
@<Header information for rules@>;
@<Header information for glues@>;
@<Header information for penalties@>;
end

@ @<Output the new information for OFM files@>=
begin
@<Output the ivalue headers@>;
@<Output the fvalue headers@>;
@<Output the mvalue headers@>;
@<Output the rule headers@>;
@<Output the glue headers@>;
@<Output the penalty headers@>;
@<Output the ivalues@>;
@<Output the fvalues@>;
@<Output the mvalues@>;
@<Output the rules@>;
@<Output the glues@>;
@<Output the penalties@>;
end

@* System-dependent changes.
This section should be replaced, if necessary, by changes to the program
that are necessary to make \.{PLtoTF} work at a particular installation.
It is usually best to design your change file so that all changes to
previous sections preserve the section numbering; then everybody's version
will be consistent with the printed program. More extensive changes,
which introduce new sections, can be inserted here; then only the index
itself will get a new section number.
@^system dependencies@>

@* Index.
Pointers to error messages appear here together with the section numbers
where each ident\-i\-fier is used.