path: root/Build/source/texk/kpathsea/texmf.cnf

% original texmf.cnf -- runtime path configuration file for kpathsea.
% Public domain.
% 
% If you modify this original file, YOUR CHANGES WILL BE LOST when it is
% updated.  Instead, put your changes -- and only your changes, not an
% entire copy of the full texmf.cnf! -- in ../../texmf.cnf.  That is, if
% this file is installed in /some/path/to/texlive/2009/texmf/web2c/texmf.cnf,
% add your custom settings to /some/path/to/texlive/2009/texmf.cnf.
% 
% What follows is a super-summary of what this .cnf file can
% contain. Please read the Kpathsea manual for more information.
%
% Any identifier (sticking to A-Za-z_ for names is safest) can be assigned.
% The `=' (and surrounding spaces) is optional.
% $foo (or ${foo}) in a value expands to the envvar or cnf value of foo.
% Long lines can be continued with a \.
%
% Earlier entries (in the same or another file) override later ones, and
% an environment variable foo overrides any texmf.cnf definition of foo.
%
% All definitions are read before anything is expanded, so you can use
% variables before they are defined.
%
% If a variable assignment is qualified with `.PROGRAM', it is ignored
% unless the current executable (last filename component of argv[0]) is
% named PROGRAM.  This foo.PROGRAM construct is not recognized on the
% right-hand side. For environment variables, use FOO_PROGRAM.
%
% Which file formats use which paths for searches is described in the
% various programs' and the Kpathsea documentation (http://tug.org/kpathsea).
%
% // means to search subdirectories (recursively).
% A leading !! means to look only in the ls-R db, never on the disk.
% In this file, either ; or : can be used to separate path components.
% A leading/trailing/doubled path separator in the paths will be
%   expanded into the compile-time default. Probably not what you want.
%

% Brace notation is supported, for example: /usr/local/{mytex,othertex}
% expands to /usr/local/mytex:/usr/local/othertex.  You can use the path
% separator as well as the comma for this: /usr/local/{mytex:othertex}
% also expands to /usr/local/mytex:/usr/local/othertex.  We make
% extensive use of this.

%  Part 1: Search paths and directories.

% You can set an environment variable to override TEXMF if you're testing
% a new TeX tree, without changing anything else.
%
% You may wish to use one of the $SELFAUTO... variables here so TeX will
% find where to look dynamically.  See the manual and the definition
% below of TEXMFCNF.

% The tree containing the runtime files closely related to the specific
% program version used:
TEXMFMAIN = $SELFAUTOPARENT/texmf

% The main distribution tree:
TEXMFDIST = $SELFAUTOPARENT/texmf-dist

% A place for local additions to a "standard" texmf tree.
% This tree is not used for local configuration maintained by
% texconfig, it uses TEXMFCONFIG below.
TEXMFLOCAL = $SELFAUTOPARENT/../texmf-local

% TEXMFSYSVAR, where texconfig-sys stores variable runtime data.
% With teTeX-3.0 or later, this must be set.
% For sharing this tree with $TEXMFMAIN:
%   TEXMFSYSVAR = $TEXMFMAIN
% For using a separate tree:
%   TEXMFSYSVAR = $SELFAUTOPARENT/texmf-var
TEXMFSYSVAR = $SELFAUTOPARENT/texmf-var

% TEXMFSYSCONFIG, where texconfig-sys stores configuration data.
% With teTeX-3.0 or later, this must be set.
% For sharing this tree with $TEXMFMAIN:
%   TEXMFSYSCONFIG = $TEXMFMAIN
% For using a separate tree:
%   TEXMFSYSCONFIG = $SELFAUTOPARENT/texmf-config
TEXMFSYSCONFIG = $SELFAUTOPARENT/texmf-config

% User texmf trees are allowed as follows.
% This used to be HOMETEXMF.
TEXMFHOME = ~/texmf

% TEXMFVAR, where texconfig stores variable runtime data.
% With teTeX-3.0 or later, this must be set.
% For sharing this tree with $TEXMFMAIN:
%   TEXMFVAR = $TEXMFMAIN
% For using a separate tree:
%   TEXMFVAR = ~/.texmf-var  # teTeX 3.0 default
TEXMFVAR = ~/.texlive2009/texmf-var

% TEXMFCONFIG, where texconfig stores configuration data.
% With teTeX-3.0 or later, this must be set.
% For sharing this tree with $TEXMFMAIN:
%   TEXMFCONFIG = $TEXMFMAIN
% For using a separate tree:
%   TEXMFCONFIG = ~/.texmf-config  # teTeX 3.0 default
% For using a separate tree:
%   TEXMFCONFIG = $SELFAUTOPARENT/texmf-config
TEXMFCONFIG = ~/.texlive2009/texmf-config

% Now, list all the texmf trees. If you have multiple trees you can
% use shell brace notation, like this:
%   TEXMF = {$TEXMFHOME,!!$TEXMFLOCAL,!!$TEXMFMAIN}
% The braces are necessary.
%
% For texconfig to work properly, TEXMFCONFIG and TEXMFVAR should be named
% explicitly and before all other trees.
% 
% TEXMFLOCAL follows TEXMFMAIN (and precedes TEXMFDIST) because the only
% files in TEXMFMAIN are tightly coupled with the particular version of
% the distribution, such as format files.  Overriding them would be more
% likely to cause trouble than help.  On the other hand, all the
% standard packages and fonts are in TEXMFDIST, and locally-installed
% versions should take precedence over those (although it is generally a
% source of confusion to have different versions of a package installed,
% whatever the trees, so try to avoid it).
TEXMF = {$TEXMFCONFIG,$TEXMFVAR,$TEXMFHOME,!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST}

% The system trees.  These are the trees that are shared by all the users.
% If a tree appears in this list, the mktex* scripts will use
% VARTEXFONTS for generated files, if the original tree isn't writable;
% otherwise the current working directory is used.
SYSTEXMF = $TEXMFSYSVAR;$TEXMFMAIN;$TEXMFLOCAL;$TEXMFDIST

% Where generated fonts may be written.  This tree is used when the sources
% were found in a system tree and either that tree wasn't writable, or the
% varfonts feature was enabled in MT_FEATURES in mktex.cnf.
VARTEXFONTS = $TEXMFVAR/fonts

% Where to look for ls-R files.  There need not be an ls-R in the
% directories in this path, but if there is one, Kpathsea will use it.
% By default, this is only the !! elements of TEXMF, so that mktexlsr
% does not create ls-R files in the non-!! elements -- because if an
% ls-R is present, it will be used, and the disk will not be searched.
% This is arguably a bug in kpathsea.
%
TEXMFDBS = {!!$TEXMFSYSCONFIG,!!$TEXMFSYSVAR,!!$TEXMFMAIN,!!$TEXMFLOCAL,!!$TEXMFDIST}

% On some systems, there will be a system tree which contains all the font
% files that may be created as well as the formats.  For example
%   TEXMFVAR = /var/lib/texmf
% is used in many distros.  In this case, set VARTEXFONTS like this
% VARTEXFONTS = $TEXMFVAR/fonts
% and do not mention it in TEXMFDBS (but _do_ mention TEXMFVAR).
%
% Remove $VARTEXFONTS from TEXMFDBS if the VARTEXFONTS directory is below
% one of the TEXMF directories (avoids overlapping ls-R files).


%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
% Usually you will not need to edit any of the following variables.
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%

% WEB2C is for Web2C specific files.  The current directory may not be
% a good place to look for them.
WEB2C = $TEXMF/web2c

% TEXINPUTS is for TeX input files -- i.e., anything to be found by \input
% or \openin, including .sty, .eps, etc.  We specify paths for all known
% formats, past or present.  Not all of them are built these days.

% Plain TeX.  Have the command tex check all directories as a last
% resort, we may have plain-compatible stuff anywhere.
TEXINPUTS.tex           = .;$TEXMF/tex/{plain,generic,}//

% Fontinst needs to read afm files.
TEXINPUTS.fontinst      = .;$TEXMF/{tex,fonts/afm}//

% Other plain-based formats.
TEXINPUTS.amstex        = .;$TEXMF/tex/{amstex,plain,generic,}//
TEXINPUTS.csplain       = .;$TEXMF/tex/{csplain,plain,generic,}//
TEXINPUTS.eplain        = .;$TEXMF/tex/{eplain,plain,generic,}//
TEXINPUTS.ftex          = .;$TEXMF/tex/{formate,plain,generic,}//
TEXINPUTS.mex           = .;$TEXMF/tex/{mex,plain,generic,}//
TEXINPUTS.texinfo       = .;$TEXMF/tex/{texinfo,plain,generic,}//

% LaTeX 2e specific macros are stored in latex/, macros that can only be
% used with 2.09 in latex209/.  In addition, we look in the directory
% latex209, useful for macros that were written for 2.09 and do not
% mention 2e at all, but can be used with 2e.
TEXINPUTS.cslatex       = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}//
TEXINPUTS.latex         = .;$TEXMF/tex/{latex,generic,}//
TEXINPUTS.latex209      = .;$TEXMF/tex/{latex209,generic,latex,}//
TEXINPUTS.olatex        = .;$TEXMF/tex/{latex,generic,}//

% MLTeX.
TEXINPUTS.frlatex       = .;$TEXMF/tex/{french,latex,generic,}//
TEXINPUTS.frtex         = .;$TEXMF/tex/{french,plain,generic,}//
TEXINPUTS.mllatex       = .;$TEXMF/tex/{latex,generic,}//
TEXINPUTS.mltex         = .;$TEXMF/tex/{plain,generic,}//

% e-TeX.
TEXINPUTS.elatex        = .;$TEXMF/tex/{latex,generic,}//
TEXINPUTS.etex          = .;$TEXMF/tex/{plain,generic,}//

% pdfTeX.
TEXINPUTS.pdfcslatex    = .;$TEXMF/tex/{cslatex,csplain,latex,generic,}//
TEXINPUTS.pdfcsplain    = .;$TEXMF/tex/{csplain,plain,generic,}//
TEXINPUTS.pdflatex      = .;$TEXMF/tex/{latex,generic,}//
TEXINPUTS.pdfmex        = .;$TEXMF/tex/{mex,plain,generic,}//
TEXINPUTS.utf8mex       = .;$TEXMF/tex/{mex,plain,generic,}//
TEXINPUTS.pdftex        = .;$TEXMF/tex/{plain,generic,}//
TEXINPUTS.pdftexinfo    = .;$TEXMF/tex/{texinfo,plain,generic,}//
TEXINPUTS.pdfamstex     = .;$TEXMF/tex/{amstex,plain,generic,}//

% pdfeTeX.
TEXINPUTS.pdfelatex     = .;$TEXMF/tex/{latex,generic,}//
TEXINPUTS.pdfetex       = .;$TEXMF/tex/{plain,generic,}//

% pdfxTeX.
TEXINPUTS.pdfxlatex     = .;$TEXMF/tex/{latex,generic,}//
TEXINPUTS.pdfxmex       = .;$TEXMF/tex/{mex,plain,generic,}//
TEXINPUTS.pdfxtex       = .;$TEXMF/tex/{plain,generic,}//

% LuaTeX.
TEXINPUTS.lualatex      = .;$TEXMF/tex/{lualatex,latex,generic,}//
TEXINPUTS.luatex        = .;$TEXMF/tex/{luatex,plain,generic,}//
TEXINPUTS.pdflualatex   = .;$TEXMF/tex/{lualatex,latex,generic,}//
TEXINPUTS.pdfluatex     = .;$TEXMF/tex/{luatex,plain,generic,}//

% XeTeX.
TEXINPUTS.xelatex       = .;$TEXMF/tex/{xelatex,latex,generic,}//
TEXINPUTS.xeplain       = .;$TEXMF/tex/{xeplain,eplain,plain,generic,}//
TEXINPUTS.xetex         = .;$TEXMF/tex/{xetex,plain,generic,}//

% Omega / Aleph.
TEXINPUTS.aleph         = .;$TEXMF/tex/{plain,generic,}//
TEXINPUTS.elambda       = .;$TEXMF/tex/{lambda,latex,generic,}//
TEXINPUTS.eomega        = .;$TEXMF/tex/{plain,generic,}//
TEXINPUTS.lambda        = .;$TEXMF/tex/{lambda,latex,generic,}//
TEXINPUTS.lamed         = .;$TEXMF/tex/{lamed,lambda,latex,generic,}//
TEXINPUTS.omega         = .;$TEXMF/tex/{plain,generic,}//

% ConTeXt.
TEXINPUTS.context       = .;$TEXMF/tex/{context,plain,generic,}//

% jadetex
TEXINPUTS.jadetex       = .;$TEXMF/tex/{jadetex,latex,generic,}//
TEXINPUTS.pdfjadetex    = .;$TEXMF/tex/{jadetex,latex,generic,}//

% XMLTeX.
TEXINPUTS.xmltex        = .;$TEXMF/tex/{xmltex,latex,generic,}//
TEXINPUTS.pdfxmltex     = .;$TEXMF/tex/{xmltex,latex,generic,}//

% Miscellany, no longer built.
TEXINPUTS.lamstex       = .;$TEXMF/tex/{lamstex,plain,generic,}//
TEXINPUTS.lollipop      = .;$TEXMF/tex/{lollipop,plain,generic,}//
TEXINPUTS.frpdflatex    = .;$TEXMF/tex/{french,latex,generic,}//
TEXINPUTS.frpdftex      = .;$TEXMF/tex/{french,plain,generic,}//

% Earlier entries override later ones, so put this generic one last.
TEXINPUTS               = .;$TEXMF/tex/{$progname,generic,}//

% ttf2tfm.
TTF2TFMINPUTS =                 .;$TEXMF/ttf2pk//

% Metafont, MetaPost inputs.
MFINPUTS = .;$TEXMF/metafont//;{$TEXMF/fonts,$VARTEXFONTS}/source//
MPINPUTS = .;$TEXMF/metapost//

% Dump files (fmt/base/mem) for vir{tex,mf,mp} to read.
% We want to find the engine-specific file, e.g., cont-en.fmt can
% exist under both pdftex/ and xetex/.  But just in case some formats
% end up without an engine directory, look directly in web2c/ too.
% We repeat the same definition three times because of the way fmtutil
% is implemented; if we use ${TEXFORMATS}, the mpost/mf/etc. formats
% will not be found.
TEXFORMATS = .;$TEXMF/web2c{/$engine,}
MFBASES = .;$TEXMF/web2c{/$engine,}
MPMEMS = .;$TEXMF/web2c{/$engine,}
%
% As of 2008, pool files don't exist any more (the strings are compiled
% into the binaries), but just in case something expects to find these:
TEXPOOL = .;$TEXMF/web2c
MFPOOL = ${TEXPOOL}
MPPOOL = ${TEXPOOL}

% support the original xdvi.  Must come before the generic settings.
PKFONTS.XDvi   = .;$TEXMF/%s;$VARTEXFONTS/pk/{%m,modeless}//
VFFONTS.XDvi   = .;$TEXMF/%s
PSHEADERS.XDvi = .;$TEXMF/%q{dvips,fonts/type1}//
TEXPICTS.XDvi  = .;$TEXMF/%q{dvips,tex}//

% Device-independent font metric files.
VFFONTS = .;$TEXMF/fonts/vf//
TFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/tfm//

% The $MAKETEX_MODE below means the drivers will not use a cx font when
% the mode is ricoh.  If no mode is explicitly specified, kpse_prog_init
% sets MAKETEX_MODE to /, so all subdirectories are searched.  See the manual.
% The modeless part guarantees that bitmaps for PostScript fonts are found.
PKFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/pk/{$MAKETEX_MODE,modeless}//

% Similarly for the GF format, which only remains in existence because
% Metafont outputs it (and MF isn't going to change).
GFFONTS = .;$TEXMF/fonts/gf/$MAKETEX_MODE//

% A backup for PKFONTS and GFFONTS. Not used for anything.
GLYPHFONTS = .;$TEXMF/fonts

% A place to puth everything that doesn't fit the other font categories.
MISCFONTS = .;$TEXMF/fonts/misc//

% font name map files.  This isn't just fonts/map// because ConTeXt
% wants support for having files with the same name in the different
% subdirs.  Maybe if the programs ever get unified to accepting the same
% map file syntax the definition can be simplified again.
TEXFONTMAPS = .;$TEXMF/fonts/map/{$progname,pdftex,dvips,}//

% BibTeX bibliographies and style files.  bibtex8 also uses these.
BIBINPUTS = .;$TEXMF/bibtex/bib//
BSTINPUTS = .;$TEXMF/bibtex/{bst,csf}//

% MlBibTeX.
MLBIBINPUTS = .;$TEXMF/bibtex/bib/{mlbib,}//
MLBSTINPUTS = .;$TEXMF/bibtex/{mlbst,bst}//

% MFT style files.
MFTINPUTS = .;$TEXMF/mft//

% PostScript headers and prologues (.pro); unfortunately, some programs
% also use this for acessing font files (enc, type1, truetype)
TEXPSHEADERS = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3}}//
TEXPSHEADERS.gsftopk = .;$TEXMF/{dvips,fonts/{enc,type1,type42,type3,truetype}}//

% OSFONTDIR is to provide a convenient hook for allowing TeX to find
% fonts installed on the system (outside of TeX).  An empty default
% value would add "//" to the search paths, so we give it a dummy value.
OSFONTDIR = /please/set/osfontdir/in/the/environment

% PostScript Type 1 outline fonts.
T1FONTS = .;$TEXMF/fonts/type1//;$OSFONTDIR//

% PostScript AFM metric files.
AFMFONTS = .;$TEXMF/fonts/afm//;$OSFONTDIR//

% TrueType outline fonts.
TTFONTS = .;$TEXMF/fonts/truetype//;$OSFONTDIR//

% Opentype outline fonts.
OPENTYPEFONTS = .;$TEXMF/fonts/opentype//;$OSFONTDIR//

% Type 42 outline fonts.
T42FONTS = .;$TEXMF/fonts/type42//

% Ligature definition files.
LIGFONTS =  .;$TEXMF/fonts/lig//

% Dvips' config.* files (this name should not start with `TEX'!).
TEXCONFIG = $TEXMF/dvips//

% Makeindex style (.ist) files.
INDEXSTYLE = .;$TEXMF/makeindex//

% Font encoding files (.enc).
ENCFONTS = .;$TEXMF/fonts/enc//

% CMap files.
CMAPFONTS = .;$TEXMF/fonts/cmap//

% Subfont definition files.
SFDFONTS = .;$TEXMF/fonts/sfd//

% OpenType outline fonts.
OPENTYPEFONTS = .;$TEXMF/fonts/opentype//

% OpenType feature files (.fea).
FONTFEATURES=.;$TEXMF/fonts/fea//

% .cid and .cidmap
FONTCIDMAPS=.;$TEXMF/fonts/cid//

% pdftex config files:
PDFTEXCONFIG = .;$TEXMF/pdftex/{$progname,}//

% Used by DMP (ditroff-to-mpx), called by makempx -troff.
TRFONTS = /usr{/local,}/share/groff/{current/font,site-font}/devps
MPSUPPORT = .;$TEXMF/metapost/support

% For xdvi to find mime.types and .mailcap, if they do not exist in
% ~.  These are single directories, not paths.
% (But the default mime.types, at least, may well suffice.)
MIMELIBDIR = $SELFAUTOPARENT/etc
MAILCAPLIBDIR = $SELFAUTOPARENT/etc

% Default settings for fontconfig library, used by Windows versions of
% xetex/xdvipdfmx.  On Unixish systems, fontconfig ignores this.
FONTCONFIG_FILE=fonts.conf
FONTCONFIG_PATH=$TEXMFSYSVAR/fonts/conf
FC_CACHEDIR=$TEXMFSYSVAR/fonts/cache

% TeX documentation and source files, for use with texdoc and kpsewhich.
TEXDOCS = $TEXMF/doc//
TEXSOURCES = .;$TEXMF/source//

% Web and CWeb input paths.
WEBINPUTS = .;$TEXMF/web//
CWEBINPUTS = .;$TEXMF/cweb//

% Omega-related fonts and other files.
OFMFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ofm,tfm}//
OPLFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/opl//
OVFFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/{ovf,vf}//
OVPFONTS = .;{$TEXMF/fonts,$VARTEXFONTS}/ovp//
OTPINPUTS = .;$TEXMF/omega/otp//
OCPINPUTS = .;$TEXMF/omega/ocp//

% Some additional input variables for several programs.  If you add
% a program that uses the `other text files' or `other binary files'
% search formats, you'll want to add their variables here as well.
T4HTINPUTS   = .;$TEXMF/tex4ht//

%% t4ht utility, sharing files with TeX4ht
TEX4HTFONTSET=alias,iso8859,unicode
TEX4HTINPUTS = .;$TEXMF/tex4ht/base//;$TEXMF/tex4ht/ht-fonts/{$TEX4HTFONTSET}//

% TeXworks editor configuration and settings
TW_LIBPATH = $TEXMFCONFIG/texworks
TW_INIPATH = $TW_LIBPATH

% Find scripts that are distributed/installed in the texmf tree.

% Lua needs to look in TEXINPUTS for lua scripts distributed with packages.
LUAINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/lua//;$TEXINPUTS

% Lua needs to look for binary lua libraries distributed with packages.
CLUAINPUTS = .;$SELFAUTOLOC/lib/{$progname,$engine,}/lua//

% Architecture independent executables.
TEXMFSCRIPTS = $TEXMF/scripts/{$engine,$progname,}//

% Other languages.
JAVAINPUTS   = .;$TEXMF/scripts/{$progname,$engine,}/java//
PERLINPUTS   = .;$TEXMF/scripts/{$progname,$engine,}/perl//
PYTHONINPUTS = .;$TEXMF/scripts/{$progname,$engine,}/python//
RUBYINPUTS   = .;$TEXMF/scripts/{$progname,$engine,}/ruby//


%% The mktex* scripts rely on KPSE_DOT. Do not set it in the environment.
% KPSE_DOT = .

% This definition isn't used from this .cnf file itself (that would be
% paradoxical), but the compile-time default in paths.h is built from it.
% The SELFAUTO* variables are set automatically from the location of
% argv[0], in kpse_set_program_name.
% 
% This main texmf.cnf file is installed, for a release YYYY, in a
% directory such as /usr/local/texlive/YYYY/texmf/web2c/texmf.cnf.
% Since this file is subject to future updates, the TeX Live installer
% or human administrator may also create a file
% /usr/local/texlive/YYYY/texmf.cnf; any settings in this latter file
% will take precedence over the distributed one under texmf/web2c.
% 
% For security reasons, it is better not to include . in this path.
%
TEXMFCNF = {$SELFAUTOLOC,$SELFAUTODIR,$SELFAUTOPARENT}{,{/share,}/texmf{-local,}/web2c}

# kpathsea 3.5.3 and later sets these at runtime. To avoid empty
# expansions from binaries linked against an earlier version of the
# library, we set $progname and $engine to something non-empty:
progname = unsetprogname
engine = unsetengine


%  Part 2: Options.

% If this option is set to true, `tex a.b' will look first for a.b.tex
% (within each path element), and then for a.b, i.e., we try standard
% extensions first.  If this is false, we first look for a.b and then
% a.b.tex, i.e., we try the name as-is first.
%
% Both names are always tried; the difference is the order in which they
% are tried.  The setting applies to all searches, not just .tex.
%
% This setting only affects names being looked up which *already* have
% an extension.  A name without an extension (e.g., `tex story') will
% always have an extension added first.
%
% The default is true, because we already avoid adding the standard
% extension(s) in the usual cases.  E.g., babel.sty will only look for
% babel.sty, not babel.sty.tex, regardless of this setting.
try_std_extension_first = t

% Enable system commands via \write18{...}.  When enabled fully (set to
% t), obviously insecure.  When enabled partially (set to p), only the
% commands listed in shell_escape_commands are allowed.  Although this
% is not fully secure either, it is much better, and so useful that we
% enable it for everything but bare tex.
shell_escape = f

% No spaces in this command list.  These programs either do not write
% any output files, respect openout_any, or have hard-coded restrictions similar
% or higher to openout_any=p.  And have no features (nor, to the best of our
% knowledge, obvious security holes) to invoke arbitrary other programs.
% 
% Unfortunately we found too many problems with shell_escape=p, so it
% should be treated as though it were just as dangerous as shell_escape=t.
shell_escape_commands = \
false

% These programs are our first goal when we can enable it.
%kpsewhich,fc-match,\
%repstopdf,\

% we'd like to allow:
% dvips - but external commands can be executed, need at least -R1.
% (img)convert (ImageMagick) - delegates.mgk possible misconfig, besides,
%   without Unix convert it hardly seems worth it, and Windows convert
%   is something completely different that destroys filesystems, so
%   skip it.
% epspdf, epstopdf, ps2pdf, pstopdf, rpdfcrop - need to respect openout_any,
%   and we need to make sure -dSAFER is used and no injection is possible.
% pygmentize - but is the filter feature insecure?
% ps4pdf - but it calls an unrestricted latex.
% texindy,xindy - but is the module feature insecure?
% ulqda - but requires optional SHA1.pm, so why bother.
% tex, latex, etc - but need to forbid --shell-escape, and inherit openout_any
% bibtex,bibtex8,makeindex, - don't respect openout_any

% plain TeX should remain unenhanced.
shell_escape.tex = f

% Allow TeX \openin, \openout, or \input on filenames starting with `.'
% (e.g., .rhosts) or outside the current tree (e.g., /etc/passwd)?
% a (any)        : any file can be opened.
% r (restricted) : disallow opening "dotfiles".
% p (paranoid)   : as `r' and disallow going to parent directories, and
%                  restrict absolute paths to be under $TEXMFOUTPUT.
openout_any = p
openin_any = a

% Write .log/.dvi/etc. files here, if the current directory is unwritable.
% TEXMFOUTPUT = /tmp

% If a dynamic file creation fails, log the command to this file, in
% either the current directory or TEXMFOUTPUT.  Set to the
% empty string or  0  to avoid logging.
MISSFONT_LOG = missfont.log

% Set to a colon-separated list of words specifying warnings to suppress.
% To suppress everything, use TEX_HUSH = all; this is currently equivalent to
% TEX_HUSH = checksum:lostchar:readable:special
% To suppress nothing, use TEX_HUSH = none or do not set the variable at all.
TEX_HUSH = none

% Allow TeX, and MF to parse the first line of an input file for
% the %&format construct.
parse_first_line = t

% But don't parse the first line if invoked as "tex", since we want that
% to remain Knuth-compatible.  The src_specials and
% file_line_error_style settings, as well as the options -enctex,
% -mltex, -8bit, etc., also affect this, but they are all off by default.
parse_first_line.tex = f

% Control file:line:error style messages.
file_line_error_style = f

% Enable the mktex... scripts by default?  These must be set to 0 or 1.
% Particular programs can and do override these settings, for example
% dvips's -M option.  Your first chance to specify whether the scripts
% are invoked by default is at configure time.
%
% These values are ignored if the script names are changed; e.g., if you
% set DVIPSMAKEPK to `foo', what counts is the value of the environment
% variable/config value `FOO', not the `MKTEXPK' value.
%
% MKTEXTEX = 0
% MKTEXPK = 0
% MKTEXMF = 0
% MKTEXTFM = 0
% MKTEXFMT = 0
% MKOCP = 0
% MKOFM = 0

% Used by makempx to run TeX.  We use "etex" because MetaPost is
% expecting DVI, and not "tex" because we want first line parsing.
TEX = etex

% These variables specify the external program called for the
% interactive `e' option.  %d is replaced by the line number and %s by
% the current filename.  The default is specified at compile-time, and
% we let that stay in place since different platforms like different values.
%TEXEDIT = vi +%d "%s"
%MFEDIT = ${TEXEDIT}
%MPEDIT = ${TEXEDIT}

% The default `codepage and sort order' file for BibTeX8, when none is
% given as command line option or environment variable.
BIBTEX_CSFILE = 88591lat.csf

%  Part 3: Array and other sizes for TeX (and Metafont).
%
% If you want to change some of these sizes only for a certain TeX
% variant, the usual dot notation works, e.g.,
% main_memory.hugetex = 20000000
%
% If a change here appears to be ignored, try redumping the format file.

% Memory. Must be less than 8,000,000 total.
%
% main_memory is relevant only to initex, extra_mem_* only to non-ini.
% Thus, have to redump the .fmt file after changing main_memory; to add
% to existing fmt files, increase extra_mem_*.  (To get an idea of how
% much, try \tracingstats=2 in your TeX source file;
% web2c/tests/memtest.tex might also be interesting.)
%
% To increase space for boxes (as might be needed by, e.g., PiCTeX),
% increase extra_mem_bot.
%
% For some xy-pic samples, you may need as much as 700000 words of memory.
% For the vast majority of documents, 60000 or less will do.
%
main_memory = 3000000 % words of inimemory available; also applies to inimf&mp
extra_mem_top = 0     % extra high memory for chars, tokens, etc.
extra_mem_bot = 0     % extra low memory for boxes, glue, breakpoints, etc.

% ConTeXt needs lots of memory.
extra_mem_top.context = 2000000
extra_mem_bot.context = 4000000

% Words of font info for TeX (total size of all TFM files, approximately).
% Must be >= 20000 and <= 4000000 (without tex.ch changes).
font_mem_size = 3000000

% Total number of fonts. Must be >= 50 and <= 9000 (without tex.ch changes).
font_max = 9000

% Extra space for the hash table of control sequences.
hash_extra = 200000

% Max number of characters in all strings, including all error messages,
% help texts, font names, control sequences.  These values apply to TeX.
pool_size = 3250000
% Minimum pool space after TeX's own strings; must be at least
% 25000 less than pool_size, but doesn't need to be nearly that large.
string_vacancies = 90000
% Maximum number of strings.
max_strings = 500000
% min pool space left after loading .fmt
pool_free = 47500

% Buffer size.  TeX uses the buffer to contain input lines, but macro
% expansion works by writing material into the buffer and reparsing the
% line.  As a consequence, certain constructs require the buffer to be
% very large, even though most documents can be handled with a small value.
buf_size = 200000

% Hyphenation trie.  The maximum possible is 4194303 (ssup_trie_size in
% the sources), but we don't need that much.  The value here suffices
% for all known free hyphenation patterns to be loaded simultaneously
% (as TeX Live does).
%
trie_size = 700000

hyph_size = 8191        % prime number of hyphenation exceptions, >610, <32767.
                        % http://primes.utm.edu/curios/page.php/8191.html
nest_size = 500         % simultaneous semantic levels (e.g., groups)
max_in_open = 15        % simultaneous input files and error insertions, 
                        % also applies to MetaPost
param_size = 10000      % simultaneous macro parameters, also applies to MP
save_size = 50000       % for saving values outside current group
stack_size = 5000       % simultaneous input sources

% These are Omega-specific.
ocp_buf_size = 500000   % character buffers for ocp filters.
ocp_stack_size = 10000  % stacks for ocp computations.
ocp_list_size = 1000    % control for multiple ocps.

% These work best if they are the same as the I/O buffer size, but it
% doesn't matter much.  Must be a multiple of 8.
dvi_buf_size = 16384 % TeX
gf_buf_size = 16384  % MF

% It's probably inadvisable to change these. At any rate, we must have:
% 45 < error_line      < 255;
% 30 < half_error_line < error_line - 15;
% 60 <= max_print_line;
% These apply to TeX, Metafont, and MetaPost.
error_line = 79
half_error_line = 50
max_print_line = 79

% Metafont only.
screen_width.mf = 1664
screen_depth.mf = 1200

% BibTeX only (also used for hash_size and hash_prime).
max_strings.bibtex = 35307
max_strings.bibtex8 = 35307
max_strings.bibtexu = 35307

% GFtype only.
line_length.gftype = 500
max_rows.gftype = 8191
max_cols.gftype = 8191