path: root/Build/source/libs/xpdf/xpdf-3.04/doc/xpdfrc.cat

xpdfrc(5)                                                            xpdfrc(5)



NAME
       xpdfrc - configuration file for Xpdf tools (version 3.04)

DESCRIPTION
       All  of the Xpdf tools read a single configuration file.  If you have a
       .xpdfrc file in your home directory, it will  be  read.   Otherwise,  a
       system-wide configuration file will be read from /usr/local/etc/xpdfrc,
       if it exists.  (This  is  its  default  location;  depending  on  build
       options,  it  may  be  placed elsewhere.)  On Win32 systems, the xpdfrc
       file should be placed in the same directory as the executables.

       The xpdfrc file consists of a series of configuration options, one  per
       line.   Blank  lines  and  lines  starting  with  a  '#' (comments) are
       ignored.

       Arguments may be quoted, using  "double-quote"  characters,  e.g.,  for
       file names that contain spaces.

       The  following  sections  list all of the configuration options, sorted
       into functional groups.  There is an examples section at the end.

INCLUDE FILES
       include config-file
              Includes the specified config  file.   The  effect  of  this  is
              equivalent  to  inserting  the  contents of config-file directly
              into the parent config file in place  of  the  include  command.
              Config files can be nested arbitrarily deeply.

CHARACTER MAPPING
       nameToUnicode map-file
              Specifies  a  file with the mapping from character names to Uni-
              code.  This is used to handle PDF fonts that have  valid  encod-
              ings  but no ToUnicode entry.  Each line of a nameToUnicode file
              looks like this:

                   hex-string name

              The hex-string is the Unicode (UCS-2) character index, and  name
              is  the  corresponding  character  name.  Multiple nameToUnicode
              files can be used; if a character name is given more than  once,
              the  code in the last specified file is used.  There is a built-
              in default nameToUnicode table  with  all  of  Adobe's  standard
              character names.

       cidToUnicode registry-ordering map-file
              Specifies the file with the mapping from character collection to
              Unicode.  Each line of a cidToUnicode file represents one  char-
              acter:

                   hex-string

              The  hex-string is the Unicode (UCS-2) index for that character.
              The first line maps CID 0, the second line  CID  1,  etc.   File
              size  is  determined  by size of the character collection.  Only
              one file is allowed per character collection; the last specified
              file is used.  There are no built-in cidToUnicode mappings.

       unicodeToUnicode font-name-substring map-file
              This  is used to work around PDF fonts which have incorrect Uni-
              code information.  It specifies a file which maps from the given
              (incorrect)  Unicode  indexes  to the correct ones.  The mapping
              will be used for any font  whose  name  contains  font-name-sub-
              string.   Each  line  of  a unicodeToUnicode file represents one
              Unicode character:

                  in-hex out-hex1 out-hex2 ...

              The in-hex field is an input (incorrect) Unicode index, and  the
              rest  of  the  fields  are  one or more output (correct) Unicode
              indexes.  Each occurrence of in-hex will  be  converted  to  the
              specified output sequence.

       unicodeMap encoding-name map-file
              Specifies  the  file with mapping from Unicode to encoding-name.
              These encodings are used for text output (see below).  Each line
              of  a  unicodeMap file represents a range of one or more Unicode
              characters which maps linearly to a range in the  output  encod-
              ing:

                   in-start-hex in-end-hex out-start-hex

              Entries for single characters can be abbreviated to:

                   in-hex out-hex

              The  in-start-hex  and  in-end-hex  fields (or the single in-hex
              field) specify the Unicode range.  The out-start-hex  field  (or
              the  out-hex  field)  specifies the start of the output encoding
              range.  The length of  the  out-start-hex  (or  out-hex)  string
              determines the length of the output characters (e.g., UTF-8 uses
              different numbers of bytes to represent characters in  different
              ranges).   Entries  must  be  given in increasing Unicode order.
              Only one file is allowed per encoding; the last  specified  file
              is  used.   The Latin1, ASCII7, Symbol, ZapfDingbats, UTF-8, and
              UCS-2 encodings are predefined.

       cMapDir registry-ordering dir
              Specifies a search  directory,  dir,  for  CMaps  for  the  reg-
              istry-ordering  character  collection.   There  can  be multiple
              directories for a particular collection.  There are  no  default
              CMap directories.

       toUnicodeDir dir
              Specifies  a  search directory, dir, for ToUnicode CMaps.  There
              can be multiple ToUnicode directories.   There  are  no  default
              ToUnicode directories.

GENERAL FONT CONFIGURATION
       fontFile PDF-font-name font-file
              Maps  a  PDF font, PDF-font-name, to a font for display or Post-
              Script output.  The  font  file,  font-file,  can  be  any  type
              allowed  in  a  PDF file.  This command can be used for 8-bit or
              16-bit (CID) fonts.

       fontDir dir
              Specifies a search directory for font files.  There can be  mul-
              tiple fontDir commands; all of the specified directories will be
              searched in order.  The font files can be Type 1 (.pfa or  .pfb)
              or TrueType (.ttf or .ttc); other files in the directory will be
              ignored.  The font file name (not including the extension)  must
              exactly  match  the  PDF font name.  This search is performed if
              the font name doesn't match any of the fonts declared  with  the
              fontFile command.  There are no default fontDir directories.

       fontFileCC registry-ordering font-file
              Maps  the  registry-ordering  character collection to a font for
              display or PostScript output.  This mapping is used if the  font
              name  doesn't match any of the fonts declared with the fontFile,
              fontDir, psResidentFont16, or psResidentFontCC commands.

POSTSCRIPT FONT CONFIGURATION
       psFontPassthrough yes | no
              If set to "yes", pass 8-bit font names through to the PostScript
              output  without  substitution.   Fonts which are not embedded in
              the PDF file are expected to be available on the printer.   This
              defaults to "no".

       psResidentFont PDF-font-name PS-font-name
              When the 8-bit font PDF-font-name is used (without embedding) in
              a PDF file,  it  will  be  translated  to  the  PostScript  font
              PS-font-name,  which  is  assumed to be resident in the printer.
              Typically, PDF-font-name and  PS-font-name  are  the  same.   By
              default, only the Base-14 fonts are assumed to be resident.

       psResidentFont16 PDF-font-name wMode PS-font-name encoding
              When the 16-bit (CID) font PDF-font-name with writing mode wMode
              is used (without embedding) in a PDF file, it will be translated
              to  the  PostScript  font  PS-font-name, which is assumbed to be
              resident in the printer.  The writing mode must  be  either  'H'
              for  horizontal  or  'V'  for  vertical.   The  resident font is
              assumed to use the specified  encoding  (which  must  have  been
              defined with the unicodeMap command).

       psResidentFontCC registry-ordering wMode PS-font-name encoding
              When  a  16-bit (CID) font using the registry-ordering character
              collection and wMode writing mode is used (without embedding) in
              a  PDF  file,  the PostScript font, PS-font-name, is substituted
              for it.  The substituted font is assumbed to be resident in  the
              printer.   The writing mode must be either 'H' for horizontal or
              'V' for vertical.  The resident font is assumed to use the spec-
              ified encoding (which must have been defined with the unicodeMap
              command).

       psEmbedType1Fonts yes | no
              If set to "no", prevents embedding of Type 1 fonts in  generated
              PostScript.  This defaults to "yes".

       psEmbedTrueTypeFonts yes | no
              If  set  to "no", prevents embedding of TrueType fonts in gener-
              ated PostScript.  This defaults to "yes".

       psEmbedCIDTrueTypeFonts yes | no
              If set to "no", prevents embedding of CID TrueType fonts in gen-
              erated PostScript.  For Level 3 PostScript, this generates a CID
              font, for lower levels it generates a  non-CID  composite  font.
              This defaults to "yes".

       psEmbedCIDPostScriptFonts yes | no
              If  set  to  "no", prevents embedding of CID PostScript fonts in
              generated PostScript.  For Level 3 PostScript, this generates  a
              CID  font,  for  lower  levels  it generates a non-CID composite
              font.  This defaults to "yes".

POSTSCRIPT CONTROL
       psPaperSize width(pts) height(pts)
              Sets the paper size for PostScript output.  The width and height
              parameters  give  the paper size in PostScript points (1 point =
              1/72 inch).

       psPaperSize letter | legal | A4 | A3 | match
              Sets the paper size for PostScript output to  a  standard  size.
              The  default  paper size is set when xpdf and pdftops are built,
              typically to "letter" or "A4".  This can also be set to "match",
              which will set the paper size to match the size specified in the
              PDF file.

       psImageableArea llx lly urx ury
              Sets the imageable area for PostScript output.  The  four  inte-
              gers  are the coordinates of the lower-left and upper-right cor-
              ners of the imageable region, specified in points (with the ori-
              gin being the lower-left corner of the paper).  This defaults to
              the full paper size;  the  psPaperSize  option  will  reset  the
              imageable area coordinates.

       psCrop yes | no
              If  set  to  "yes",  PostScript output is cropped to the CropBox
              specified in the PDF file; otherwise no cropping is done.   This
              defaults to "yes".

       psUseCropBoxAsPage yes | no
              If  set  to  "yes",  PostScript output treats the CropBox as the
              page size.  By default, this is "no", and the MediaBox  is  used
              as the page size.

       psExpandSmaller yes | no
              If set to "yes", PDF pages smaller than the PostScript imageable
              area are expanded to fill the  imageable  area.   Otherwise,  no
              scalling is done on smaller pages.  This defaults to "no".

       psShrinkLarger yes | no
              If  set  to  yes, PDF pages larger than the PostScript imageable
              area are shrunk to fit the imageable area.  Otherwise, no  scal-
              ing is done on larger pages.  This defaults to "yes".

       psCenter yes | no
              If  set  to yes, PDF pages smaller than the PostScript imageable
              area (after any scaling) are centered  in  the  imageable  area.
              Otherwise,  they  are  aligned  at  the lower-left corner of the
              imageable area.  This defaults to "yes".

       psDuplex yes | no
              If set to "yes", the generated PostScript will set the  "Duplex"
              pagedevice  entry.  This tells duplex-capable printers to enable
              duplexing.  This defaults to "no".

       psLevel level1 | level1sep | level2 | level2sep | level3 | level3Sep
              Sets  the  PostScript  level  to  generate.   This  defaults  to
              "level2".

       psPreload yes | no
              If  set  to "yes", PDF forms are converted to PS procedures, and
              image data is preloaded.  This uses more  memory  in  the  Post-
              Script interpreter, but generates significantly smaller PS files
              in situations where, e.g., the same image is drawn on every page
              of a long document.  This defaults to "no".

       psOPI yes | no
              If  set  to  "yes",  generates  PostScript  OPI comments for all
              images and forms which have OPI  information.   This  option  is
              only available if the Xpdf tools were compiled with OPI support.
              This defaults to "no".

       psASCIIHex yes | no
              If set to "yes", the ASCIIHexEncode filter will be used  instead
              of ASCII85Encode for binary data.  This defaults to "no".

       psLZW yes | no
              If  set to "yes", the LZWEncode filter will be used for lossless
              compression in PostScript output; if set to "no", the RunLength-
              Encode  filter  will be used instead.  LZW generates better com-
              pression (smaller PS files), but may not be  supported  by  some
              printers.  This defaults to "yes".

       psUncompressPreloadedImages yes | no
              If  set  to  "yes", all preloaded images in PS files will uncom-
              pressed.  If set to "no", the original compressed images will be
              used  when possible.  The "yes" setting is useful to work around
              certain buggy PostScript interpreters.  This defaults to "no".

       psMinLineWidth float
              Set the minimum line width, in points,  for  PostScript  output.
              The default value is 0 (no minimum).

       psRasterResolution float
              Set  the  resolution (in dpi) for rasterized pages in PostScript
              output.  (Pdftops will rasterize pages which use  transparency.)
              This defaults to 300.

       psRasterMono yes | no
              If set to "yes", rasterized pages in PS files will be monochrome
              (8-bit gray) instead of color.  This defaults to "no".

       psRasterSliceSize pixels
              When rasterizing pages, pdftops splits the page into  horizontal
              "slices",  to  limit memory usage.  This option sets the maximum
              slice size, in pixels.  This defaults to 20000000 (20 million).

       psAlwaysRasterize yes | no
              If set to "yes", all PostScript output will be rasterized.  This
              defaults to "no".

       psFile file-or-command
              Sets  the  default  PostScript  file  or print command for xpdf.
              Commands start with a '|' character; anything else  is  a  file.
              If  the  file name or command contains spaces it must be quoted.
              This defaults to unset, which tells xpdf to generate a  name  of
              the form <file>.ps for a PDF file <file>.pdf.

       fontDir dir
              See the description above, in the DISPLAY FONTS section.

TEXT CONTROL
       textEncoding encoding-name
              Sets the encoding to use for text output.  (This can be overrid-
              den with the "-enc" switch on the  command  line.)   The  encod-
              ing-name  must  be  defined  with  the  unicodeMap  command (see
              above).  This defaults to "Latin1".

       textEOL unix | dos | mac
              Sets the end-of-line convention to use  for  text  output.   The
              options are:

                  unix = LF
                  dos  = CR+LF
                  mac  = CR

              (This  can  be  overridden with the "-eol" switch on the command
              line.)  The default value is based on  the  OS  where  xpdf  and
              pdftotext were built.

       textPageBreaks yes | no
              If  set  to "yes", text extraction will insert page breaks (form
              feed characters) between pages.  This defaults to "yes".

       textKeepTinyChars yes | no
              If set to "yes", text extraction will keep all  characters.   If
              set  to  "no", text extraction will discard tiny (smaller than 3
              point) characters after  the  first  50000  per  page,  avoiding
              extremely slow run times for PDF files that use special fonts to
              do shading or cross-hatching.  This defaults to "yes".

MISCELLANEOUS SETTINGS
       initialZoom percentage | page | width
              Sets the initial zoom factor.  A number specifies  a  zoom  per-
              centage,  where  100 means 72 dpi.  You may also specify 'page',
              to fit the page to the window size, or 'width', to fit the  page
              width to the window width.

       continuousView yes | no
              If  set to "yes", xpdf will start in continuous view mode, i.e.,
              with one vertical screoll bar  for  the  whole  document.   This
              defaults to "no".

       enableFreeType yes | no
              Enables  or  disables  use of FreeType (a TrueType / Type 1 font
              rasterizer).  This is only relevant if the Xpdf tools were built
              with  FreeType  support.   ("enableFreeType"  replaces  the  old
              "freetypeControl" option.)  This option defaults to "yes".

       enableFreeType yes | no
              Enables or disables use of FreeType (a TrueType /  Type  1  font
              rasterizer).  This is only relevant if the Xpdf tools were built
              with  FreeType  support.   ("enableFreeType"  replaces  the  old
              "freetypeControl" option.)  This option defaults to "yes".

       disableFreeTypeHinting yes | no
              If  this  is  set to "yes", FreeType hinting will be forced off.
              This option defaults to "no".

       antialias yes | no
              Enables or disables font anti-aliasing in  the  PDF  rasterizer.
              This option affects all font rasterizers.  ("antialias" replaces
              the anti-aliasing control provided by the old "t1libControl" and
              "freetypeControl" options.)  This default to "yes".

       vectorAntialias yes | no
              Enables  or disables anti-aliasing of vector graphics in the PDF
              rasterizer.  This defaults to "yes".

       antialiasPrinting yes | no
              If  this  is  "yes",  bitmaps  sent  to  the  printer  will   be
              antialiased  (according to the "antialias" and "vectorAntialias"
              settings).  If  this  is  "no",  printed  bitmaps  will  not  be
              antialiased.  This defaults to "no".

       strokeAdjust yes | no
              Enables  or disables stroke adjustment.  Stroke adjustment moves
              horizontal and vertical lines by up to half a pixel to make them
              look  "cleaner"  when  vector  anti-aliasing  is  enabled.  This
              defaults to "yes".

       screenType dispersed | clustered | stochasticClustered
              Sets the halftone screen type, which will be used when  generat-
              ing  a  monochrome  (1-bit)  bitmap.  The three options are dis-
              persed-dot dithering, clustered-dot dithering (with a round  dot
              and   45-degree  screen  angle),  and  stochastic  clustered-dot
              dithering.  By default, "stochasticClustered" is used for  reso-
              lutions of 300 dpi and higher, and "dispersed" is used for reso-
              lutions lower then 300 dpi.

       screenSize integer
              Sets the size of the (square) halftone screen threshold  matrix.
              By  default, this is 4 for dispersed-dot dithering, 10 for clus-
              tered-dot  dithering,  and  100  for  stochastic   clustered-dot
              dithering.

       screenDotRadius integer
              Sets  the  halftone  screen  dot radius.  This is only used when
              screenType is set to stochasticClustered, and it defaults to  2.
              In  clustered-dot  mode,  the  dot  radius is half of the screen
              size.  Dispersed-dot dithering doesn't have a dot radius.

       screenGamma float
              Sets the halftone screen gamma correction parameter.  Gamma val-
              ues  greater  than 1 make the output brighter; gamma values less
              than 1 make it darker.  The default value is 1.

       screenBlackThreshold float
              When halftoning, all values below this threshold are  forced  to
              solid black.  This parameter is a floating point value between 0
              (black) and 1 (white).  The default value is 0.

       screenWhiteThreshold float
              When halftoning, all values above this threshold are  forced  to
              solid white.  This parameter is a floating point value between 0
              (black) and 1 (white).  The default value is 1.

       minLineWidth float
              Set the minimum line width, in device pixels.  This affects  the
              rasterizer  only,  not  the PostScript converter (except when it
              uses rasterization to handle transparency).  The  default  value
              is 0 (no minimum).

       drawAnnotations yes | no
              If  set  to "no", annotations will not be drawn or printed.  The
              default value is "yes".

       overprintPreview yes | no
              If set to "yes", generate overprint preview output, honoring the
              OP/op/OPM  settings  in the PDF file.  Ignored for non-CMYK out-
              put.  The default value is "no".

       launchCommand command
              Sets the command executed when  you  click  on  a  "launch"-type
              link.   The  intent  is  for  the command to be a program/script
              which determines the file type and runs the appropriate  viewer.
              The  command  line will consist of the file to be launched, fol-
              lowed by any parameters specified with the  link.   Do  not  use
              "%s"  in  "command".   By  default, this is unset, and Xpdf will
              simply try to execute the file (after prompting the user).

       urlCommand command
              Sets the command executed when you click on  a  URL  link.   The
              string  "%s"  will  be  replaced with the URL.  (See the example
              below.)  This has no default value.

       movieCommand command
              Sets the command executed when you click on a movie  annotation.
              The string "%s" will be replaced with the movie file name.  This
              has no default value.

       mapNumericCharNames yes | no
              If set to "yes", the Xpdf tools  will  attempt  to  map  various
              numeric character names sometimes used in font subsets.  In some
              cases this leads to usable text, and in other cases it leads  to
              gibberish -- there is no way for Xpdf to tell.  This defaults to
              "yes".

       mapUnknownCharNames yes | no
              If set to "yes", and mapNumericCharNames is  set  to  "no",  the
              Xpdf  tools  will  apply  a simple pass-through mapping (Unicode
              index = character code) for all unrecognized glyph names.   (For
              CID  fonts, setting mapNumericCharNames to "no" is unnecessary.)
              In some cases, this leads to usable text, and in other cases  it
              leads  to  gibberish  -- there is no way for Xpdf to tell.  This
              defaults to "no".

       mapExtTrueTypeFontsViaUnicode yes | no
              When rasterizing text using an external TrueType font, there are
              two  options  for  handling character codes.  If mapExtTrueType-
              FontsViaUnicode is set to "yes", Xpdf will use the  font  encod-
              ing/ToUnicode  info  to map character codes to Unicode, and then
              use the font's Unicode cmap to map Unicode to GIDs.  If  mapExt-
              TrueTypeFontsViaUnicode  is  set  to  "no", Xpdf will assume the
              character codes are GIDs (i.e., use an identity mapping).   This
              defaults to "yes".

       enableXFA yes | no
              If  set  to  "yes", an XFA form (if present) will be rendered in
              place of an AcroForm.  If "no", an XFA form will never  be  ren-
              dered.  This defaults to "yes".

       bind modifiers-key context command ...
              Add  a  key  or  mouse button binding.  Modifiers can be zero or
              more of:

                  shift-
                  ctrl-
                  alt-

              Key can be a regular ASCII character, or any one of:

                  space
                  tab
                  return
                  enter
                  backspace
                  insert
                  delete
                  home
                  end
                  pgup
                  pgdn
                  left / right / up / down        (arrow keys)
                  f1 .. f35                       (function keys)
                  mousePress1 .. mousePress7      (mouse buttons)
                  mouseRelease1 .. mouseRelease7  (mouse buttons)

              Context is either "any" or a comma-separated combination of:

                  fullScreen / window       (full screen mode on/off)
                  continuous / singlePage   (continuous mode on/off)
                  overLink / offLink        (mouse over link or not)
                  scrLockOn / scrLockOff    (scroll lock on/off)

              The context string can include only one  of  each  pair  in  the
              above list.

              Command  is  an  Xpdf  command  (see the COMMANDS section of the
              xpdf(1) man page for details).  Multiple commands are  separated
              by whitespace.

              The  bind  command replaces any existing binding, but only if it
              was defined for the exact same modifiers, key, and context.  All
              tokens (modifiers, key, context, commands) are case-sensitive.

              Example key bindings:

                  # bind ctrl-a in any context to the nextPage
                  # command
                  bind ctrl-a any nextPage

                  # bind uppercase B, when in continuous mode
                  # with scroll lock on, to the reload command
                  # followed by the prevPage command
                  bind B continuous,scrLockOn reload prevPage

              See the xpdf(1) man page for more examples.

       unbind modifiers-key context
              Removes  a  key binding established with the bind command.  This
              is most useful to remove default key bindings before  establish-
              ing  new  ones  (e.g.,  if  the default key binding is given for
              "any" context, and you want to create new key bindings for  mul-
              tiple contexts).

       printCommands yes | no
              If  set  to  "yes", drawing commands are printed as they're exe-
              cuted (useful for debugging).  This defaults to "no".

       errQuiet yes | no
              If set to "yes", this suppresses all error and warning  messages
              from all of the Xpdf tools.  This defaults to "no".

EXAMPLES
       The following is a sample xpdfrc file.

       # from the Thai support package
       nameToUnicode /usr/local/share/xpdf/Thai.nameToUnicode

       # from the Japanese support package
       cidToUnicode Adobe-Japan1 /usr/local/share/xpdf/Adobe-Japan1.cidToUnicode
       unicodeMap   JISX0208     /usr/local/share/xpdf/JISX0208.unicodeMap
       cMapDir      Adobe-Japan1 /usr/local/share/xpdf/cmap/Adobe-Japan1

       # use the Base-14 Type 1 fonts from ghostscript
       fontFile Times-Roman           /usr/local/share/ghostscript/fonts/n021003l.pfb
       fontFile Times-Italic          /usr/local/share/ghostscript/fonts/n021023l.pfb
       fontFile Times-Bold            /usr/local/share/ghostscript/fonts/n021004l.pfb
       fontFile Times-BoldItalic      /usr/local/share/ghostscript/fonts/n021024l.pfb
       fontFile Helvetica             /usr/local/share/ghostscript/fonts/n019003l.pfb
       fontFile Helvetica-Oblique     /usr/local/share/ghostscript/fonts/n019023l.pfb
       fontFile Helvetica-Bold        /usr/local/share/ghostscript/fonts/n019004l.pfb
       fontFile Helvetica-BoldOblique /usr/local/share/ghostscript/fonts/n019024l.pfb
       fontFile Courier               /usr/local/share/ghostscript/fonts/n022003l.pfb
       fontFile Courier-Oblique       /usr/local/share/ghostscript/fonts/n022023l.pfb
       fontFile Courier-Bold          /usr/local/share/ghostscript/fonts/n022004l.pfb
       fontFile Courier-BoldOblique   /usr/local/share/ghostscript/fonts/n022024l.pfb
       fontFile Symbol                /usr/local/share/ghostscript/fonts/s050000l.pfb
       fontFile ZapfDingbats          /usr/local/share/ghostscript/fonts/d050000l.pfb

       # use the Bakoma Type 1 fonts
       # (this assumes they happen to be installed in /usr/local/fonts/bakoma)
       fontDir /usr/local/fonts/bakoma

       # set some PostScript options
       psPaperSize          letter
       psDuplex             no
       psLevel              level2
       psEmbedType1Fonts    yes
       psEmbedTrueTypeFonts yes
       psFile               "| lpr -Pprinter5"

       # assume that the PostScript printer has the Univers and
       # Univers-Bold fonts
       psResidentFont Univers      Univers
       psResidentFont Univers-Bold Univers-Bold

       # set the text output options
       textEncoding UTF-8
       textEOL      unix

       # misc options
       enableFreeType  yes
       launchCommand   viewer-script
       urlCommand      "netscape -remote 'openURL(%s)'"


FILES
       /usr/local/etc/xpdfrc
              This  is  the default location for the system-wide configuration
              file.  Depending on build options, it may be placed elsewhere.

       $HOME/.xpdfrc
              This is the user's configuration file.  If it exists, it will be
              read in place of the system-wide file.

AUTHOR
       The  Xpdf  software  and  documentation are copyright 1996-2014 Glyph &
       Cog, LLC.

SEE ALSO
       xpdf(1),  pdftops(1),  pdftotext(1),  pdftohtml(1),  pdfinfo(1),   pdf-
       fonts(1), pdfdetach(1), pdftoppm(1), pdftopng(1), pdfimages(1)
       http://www.foolabs.com/xpdf/



                                  28 May 2014                        xpdfrc(5)