summaryrefslogtreecommitdiff
path: root/Master
diff options
context:
space:
mode:
Diffstat (limited to 'Master')
-rw-r--r--Master/texmf-dist/doc/latex/gridset/LICENSE.md19
-rw-r--r--Master/texmf-dist/doc/latex/gridset/README.md50
-rw-r--r--Master/texmf-dist/doc/latex/gridset/gridset.pdfbin122125 -> 223385 bytes
-rw-r--r--Master/texmf-dist/source/latex/gridset/README50
-rw-r--r--Master/texmf-dist/source/latex/gridset/gridset.dtx256
-rw-r--r--Master/texmf-dist/source/latex/gridset/gridset.ins90
-rw-r--r--Master/texmf-dist/tex/latex/gridset/gridset.sty531
7 files changed, 325 insertions, 671 deletions
diff --git a/Master/texmf-dist/doc/latex/gridset/LICENSE.md b/Master/texmf-dist/doc/latex/gridset/LICENSE.md
new file mode 100644
index 00000000000..99a6973749b
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/gridset/LICENSE.md
@@ -0,0 +1,19 @@
+----------------------------------------------------------------------------
+
+This work may be distributed and/or modified under the conditions of the
+LaTeX Project Public License, version 1.3c of the license. The latest
+version of this license is in http://www.latex-project.org/lppl.txt and
+version 1.3c or later is part of all distributions of LaTeX 2005/12/01
+or later. This work has the LPPL maintenance status “maintained”.
+The current maintainer and author of this work is Markus Kohm.
+
+----------------------------------------------------------------------------
+
+Dieses Werk darf nach den Bedingungen der LaTeX Project Public Lizenz
+in der Version 1.3c, verteilt und/oder verändert werden. Die aktuelle
+Version dieser Lizenz ist http://www.latex-project.org/lppl.txt und
+Version 1.3c oder später ist Teil aller Verteilungen von LaTeX 2005/12/01
+oder später. Dieses Werk hat den LPPL-Verwaltungs-Status „maintained”
+Der aktuelle Verwalter und Autor dieses Werks ist Markus Kohm.
+
+----------------------------------------------------------------------------
diff --git a/Master/texmf-dist/doc/latex/gridset/README.md b/Master/texmf-dist/doc/latex/gridset/README.md
new file mode 100644
index 00000000000..0a1963d1ebd
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/gridset/README.md
@@ -0,0 +1,50 @@
+# gridset
+
+An experimental LaTeX package for semi-manual grid (a.k.a. in-register) setting
+
+------------------------------------------------------------------------------
+
+LaTeX package `gridset`
+Copyright (c) 2008—2020 Markus Kohm
+Release: 2020-02-12 v0.3
+License: LPPL 1.3c (see LICENSE.md)
+CTAN Location: https://ctan.org/pkg/gridset
+
+------------------------------------------------------------------------------
+
+## Summary
+
+This package provides commands to save positions to and restore positions from
+`aux`-file. This may be used for grid setting (a.k.a. strict in-register
+setting).
+
+## Status Note
+
+This package should not have been released, because it was only a very
+quick implementation of an idea. You should not use it for any productive
+purpose. It has been made for testing only. I would prefer to retire it
+from any distribution. Nevertheless I know few persons using the package.
+So it will be still there but without any support!
+
+## Installation
+
+The package is part of [TeX Live](https://tug.org/texlive) (and therefore
+also [MacTeX](https://tug.org/mactex)) and [MiKTeX](http://miktex.org). Users
+should use the packages provided by their TeX distribution.
+
+However, manual extraction can be used to try out the developer version.
+
+To extract the package use:
+
+```bash
+tex gridset.dtx
+```
+
+To create the manual use:
+
+```bash
+pdflatex gridset.dtx
+mkindex gridset
+pdflatex gridset.dtx
+pdflatex gridset.dtx
+```
diff --git a/Master/texmf-dist/doc/latex/gridset/gridset.pdf b/Master/texmf-dist/doc/latex/gridset/gridset.pdf
index dbe5ddfbdb0..3f6a39a8e92 100644
--- a/Master/texmf-dist/doc/latex/gridset/gridset.pdf
+++ b/Master/texmf-dist/doc/latex/gridset/gridset.pdf
Binary files differ
diff --git a/Master/texmf-dist/source/latex/gridset/README b/Master/texmf-dist/source/latex/gridset/README
deleted file mode 100644
index 29029249a3a..00000000000
--- a/Master/texmf-dist/source/latex/gridset/README
+++ /dev/null
@@ -1,50 +0,0 @@
-----------------------------------------------------------------------------
-Package gridset
-Copyright (c) Markus Kohm, 2008
-Licence: LPPL
-Version: 2008/11/12 v0.1
-----------------------------------------------------------------------------
-This package provides commands to save positions to and restore positions
-from aux-file. This may be used for grid setting (aka strict in-register
-setting). The package needs pdfTeX at least version 1.40.
-----------------------------------------------------------------------------
-If you have a distribution of gridset with an archive containing the files
-
- doc/
- doc/latex/gridset
- doc/latex/gridset/gridset.pdf
- source/
- source/latex/
- source/latex/gridset/
- source/latex/gridset/gridset.dtx
- source/latex/gridset/README
- tex/
- tex/latex/
- tex/latex/gridset
- tex/latex/gridset/gridset.sty
- tex/latex/gridset/gridsetexample.tex
-
-you may simply extract this archive at your local texmf tree (local TDS tree)
-that may be e.g. C:\localtexmf or /usr/local/share/texmf or
-/usr/TeX/texmf-local. On some systems you may ask for the local TDS tree
-using: `kpsewhich -var-value=TEXMFLOCAL'. After extraction you should update
-your File Name DataBase e.g. using the MiKTeX Options dialog or texhash.
-
-If the files are at a root directory gridset the distributor has changed my
-original distribution archive and you have to copy the files yourself into
-the appropriate directories at one of your texmf trees and update your File
-Name DataBase.
-
-If you instead of this have only the files gridset.dtx, README, and
-gridset.pdf (optional), you have to call:
- tex gridset.dtx
-and follow the instructions.
-
-Notes:
-- If you only want to test gridset without installation, you may simply use
- a copy of gridset.dtx renamed to gridset.sty.
-- README is not a user documentation file, but only needed until
- installation has been done. Because of this, I declare it to be a
- source file. Nevertheless distrbutors may install it as an additional
- documentation file.
-----------------------------------------------------------------------------
diff --git a/Master/texmf-dist/source/latex/gridset/gridset.dtx b/Master/texmf-dist/source/latex/gridset/gridset.dtx
index 67adeb198b0..68b251db558 100644
--- a/Master/texmf-dist/source/latex/gridset/gridset.dtx
+++ b/Master/texmf-dist/source/latex/gridset/gridset.dtx
@@ -1,26 +1,27 @@
-% \CheckSum{416}
% \iffalse meta-comment
%
% gridset.dtx
%
+%% Copyright (C) 2008-2020 Markus Kohm
+%%
%% This work may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either version 1.3
+%% conditions of the LaTeX Project Public License, either version 1.3c
%% of this license or (at your option) any later version.
%% The latest version of this license is in
%% http://www.latex-project.org/lppl.txt
-%% and version 1.3 or later is part of all distributions of LaTeX
-%% version 2003/12/01 or later.
+%% and version 1.3c or later is part of all distributions of LaTeX
+%% version 2005/12/01 or later.
%%
%% This work has the LPPL maintenance status "maintained".
%%
-%% The author of the initial version of these work was
-%% Markus Kohm <komascript@gmx.info>
+%% The author and current maintainer of this work is
+%% Markus Kohm <komascript@gmx.info>.
%%
-%% This work consists of the files gridset.dtx and README.
+%% This work consists of the files gridset.dtx and README.md.
%%
%% Important Recommendation:
-%% The LPPL requires that distributions of the Work contain all the files of
-%% the Work (see ``Important Recommendations'' at lppl.txt).
+%% The LPPL requires that distributions of the Work contain all the files of
+%% the Work (see ``Important Recommendations'' at lppl.txt).
%%
%
%<*dtx>
@@ -31,23 +32,18 @@
% Give me the documentation
\ProvidesFile{gridset.dtx}
%</dtx>
-%<*dtx|tex|package|example>
+%<*dtx|package|example>
%<package>\ProvidesPackage{gridset}
-%<tex>\ProvidesFile{gridset.tex}
%<example>\ProvidesFile{gridsetexample.tex}
- [2008/11/12 v0.1 grid - aka in-register - setting]
-%</dtx|tex|package|example>
-%<*dtx|tex>
+ [2020-02-12 v0.3 grid - a.k.a. in-register - setting]
+%</dtx|package|example>
+%<*dtx>
\documentclass{ltxdoc}
\begin{document}
\RecordChanges
-%<*!tex>
\GetFileInfo{gridset.dtx}
-%</!tex>
-%<tex> \GetFileInfo{gridset.tex}
\DocInput{gridset.dtx}
-%<tex>\end{document}
-%</dtx|tex>
+%</dtx>
%<*dtx>
\expandafter\expandafter\expandafter\enddocument
\fi
@@ -60,14 +56,10 @@
%<ins>\def\batchfile{gridset.ins}
\input docstrip.tex
- \ifToplevel{%
- \let\ifalpha\iffalse
- }
\keepsilent
\askforoverwritefalse
\usedir{tex/latex/gridset}
\preamble
-Copyright (c) Markus Kohm 2008
IMPORTANT NOTE:
@@ -78,9 +70,8 @@ about the files the work consists of.
\endpreamble
\generate{%
- \file{gridset.tex}{\from{gridset.dtx}{tex}}%
\file{gridset.ins}{\from{gridset.dtx}{ins}}%
- \file{gridsetx.sty}{\from{gridset.dtx}{package}}%
+ \file{gridset.sty}{\from{gridset.dtx}{package}}%
\file{gridsetexample.tex}{\from{gridset.dtx}{example}}%
}
@@ -90,11 +81,9 @@ about the files the work consists of.
\Msg{* gridset}
\Msg{* =======}
\Msg{*}
- \ifalpha% ALPHA
- \Msg{* THIS IS AN ALPHA VERSION!}
- \Msg{* DON'T USE IT ONLY TEST IT!}
- \Msg{*}
- \fi
+ \Msg{* THIS IS AN ALPHA VERSION!}
+ \Msg{* DON'T USE IT ONLY TEST IT!}
+ \Msg{*}
\Msg{* To finish the installation run}
\Msg{* \space\space latex gridset.dtx}
\Msg{* or}
@@ -108,21 +97,19 @@ about the files the work consists of.
\Msg{* \space\space kpsewhich -var-value=TEXMFLOCAL}
\Msg{*}
\Msg{*********************************************************************}
-%<*!ins>
- \csname fi\endcsname\csname fi\endcsname\endinput
-%</!ins>
}
%</ins>
%<*dtx>
\fi
+\csname fi\endcsname
\csname batchendinput\endcsname
%</dtx>
% \fi ^^A meta-comment
%
-% \title{Semi-Manual Grid Setting Using \textsf{gridset}\iftrue^^A ALPHA
+% \title{Semi-Manual Grid Setting Using \textsf{gridset}%
% \footnote{This is an alpha version! Don't use it! Only test it! There's no
-% support and everything may change!}\fi
+% support and everything may change!}%
% }
% \author{Markus Kohm}
% \date{\filedate~\fileversion}
@@ -136,6 +123,13 @@ about the files the work consists of.
% position. This may be enough under some circumstances. In other
% circumstances it may fail. So \textsf{gridset} is only one more step for
% grid setting not a complete solution.
+%
+% \paragraph*{Important Note:} This package should have been never released,
+% because it was only a very quick implementation of an idea. You should not
+% use it for any productive purpose. It has been made for testing only. I
+% would prefer to retire it from any distribution. Nevertheless I know few
+% persons using the package. So it will be still there but without any
+% support!
% \end{abstract}
% \tableofcontents
% \section{User Manual}
@@ -163,12 +157,16 @@ about the files the work consists of.
% Because of this, it doesn't matter, that changing them is not really user
% friendly.
%
+% \DescribeMacro{\SavePos}%
% \DescribeMacro{\savepos}%
-% \cs{savepos}\marg{unique name} saves informations about the current position
+% \cs{SavePos}\marg{unique name} saves informations about the current position
% to the \texttt{aux}-file. These informations are read at next \LaTeX{} run
% and may be used (see \cs{the\dots} commands below) then. The \meta{unique
% name} has to be a position name, that is unique for all saved position
-% informations of the current document.
+% informations of the current document. Note that the command has been renamed
+% from \cs{savepos} to \cs{SavePos} in release~0.2, because Lua\TeX{} since
+% 0.85 uses \cs{savepos} as a new primitive. On other engines the old name
+% \cs{savepos} is still available.
%
% \DescribeMacro{\vskipnextgrid}
% This command moves to the next grid position. To achieve this, a position
@@ -214,17 +212,62 @@ about the files the work consists of.
% \iffalse meta-comment
%<*package>
% \fi ^^A meta-comment
+%
+% \begin{macro}{gridset@luaorpdf}
+% \changes{v0.2}{2017/06/05}{new internal because of Lua\TeX~0.85}
+% \begin{macro}{\gridset@pageheight}
+% \changes{v0.2}{2017/06/05}{new internal because of Lua\TeX~0.85}
+% \begin{macro}{\gridset@pagewidth}
+% \changes{v0.2}{2017/06/05}{new internal because of Lua\TeX~0.85}
+% \begin{macro}{\gridset@savepos}
+% \changes{v0.2}{2017/06/05}{new internal because of Lua\TeX~0.85}
+% \begin{macro}{\gridset@lastxpos}
+% \changes{v0.2}{2017/06/05}{new internal because of Lua\TeX~0.85}
+% \begin{macro}{\gridset@lastypos}
+% \changes{v0.2}{2017/06/05}{new internal because of Lua\TeX~0.85}
+% We need some locals because Lua\TeX{} changed the names of several
+% primitives inherited from PDF\TeX.
% \begin{macrocode}
-%<package>\ProvidesPackage{gridset}[\fileversion\space (package)]
+\newcommand*{\gridset@luaorpdf}[1]{%
+ \expandafter\newcommand\csname gridset@#1\endcsname{}%
+ \ifcsname pdf#1\endcsname
+ \expandafter\let\csname gridset@#1\expandafter\endcsname
+ \csname pdf#1\endcsname
+ \else
+ \ifcsname #1\endcsname
+ \expandafter\let\csname gridset@#1\expandafter\endcsname
+ \csname #1\endcsname
+ \else
+ \PackageError{gridset}{%
+ neither \expandafter\string\csname #1\endcsname\space
+ nor \xpandafter\string\csname pdf#1\endcsname\space
+ defined%
+ }{This package needs either PDFTeX or LuaTeX or XeTeX.}%
+ \fi
+ \fi
+}
+\gridset@luaorpdf{pageheight}
+\gridset@luaorpdf{pagewidth}
+\gridset@luaorpdf{savepos}
+\gridset@luaorpdf{lastxpos}
+\gridset@luaorpdf{lastypos}
% \end{macrocode}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
+% \end{macro}
%
% \begin{macro}{\gridbase}
+% \changes{v0.2}{2017/06/05}{prepared for Lua\TeX~0.85}
% \begin{macro}{\gridinterval}
-% These contain the grid information. \cs{gridbase} is a integer number
-% representing the absolute y coordinate of the upper end of the
-% grid relative to the same reference point \cs{pdfsavepos}
-% uses. \cs{gridinterval} is a integer number representing the distance of
-% two grid lines. The unit is `scaled point' (sp) both time.
+% \changes{v0.2}{2017/06/05}{prepared for Lua\TeX~0.85}
+% These contain the grid information. \cs{gridbase} is a integer number
+% representing the absolute y coordinate of the upper end of the
+% grid relative to the same reference point \cs{pdfsavepos}
+% uses. \cs{gridinterval} is a integer number representing the distance of
+% two grid lines. The unit is `scaled point' (sp) both time.
% \begin{macrocode}
\newcommand*{\gridbase}{}
\newcommand*{\gridinterval}{}
@@ -235,14 +278,14 @@ about the files the work consists of.
% \cs{pdfpagewidth} if this hasn't been done already.
% \begin{macrocode}
\AtBeginDocument{%
- \ifdim\pdfpageheight=\z@
- \pdfpageheight=\pageheight
+ \ifdim\gridset@pageheight=\z@
+ \gridset@pageheight=\paperheight
\fi
- \ifdim\pdfpagewidth=\z@
- \pdfpagewidth=\pagewidth
+ \ifdim\gridset@pagewidth=\z@
+ \gridset@pagewidth=\paperwidth
\fi
\begingroup
- \@tempdima=\dimexpr \pdfpageheight - \topmargin - 1in
+ \@tempdima=\dimexpr \gridset@pageheight - \topmargin - 1in
- \headheight - \headsep
- \topskip \relax
\@tempcnta=\@tempdima
@@ -256,31 +299,47 @@ about the files the work consists of.
% \end{macro}
%
% \begin{macro}{\savepos}
-% Save current position on the page to the \texttt{aux}-file. The argument
-% is a unique name for the position. The saved informations are:
-% \begin{itemize}
-% \item the name of the position,
-% \item the arabic page number of the page with the position,
-% \item the grid base, that was valid for this position,
-% \item the grid interval, that was valid for this position,
-% \item the x-coordinate of the absolute position,
-% \item the y-coordinate of the absolute position.
-% \end{itemize}
+% \changes{v0.2}{2017/06/05}{macro renamed}
+% \begin{macro}{\SavePos}
+% \changes{v0.2}{2017/06/05}{new name}
+% \changes{v0.2}{2017/06/05}{prepared for Lua\TeX~0.85}
+% Save current position on the page to the \texttt{aux}-file. The argument
+% is a unique name for the position. The saved informations are:
+% \begin{itemize}
+% \item the name of the position,
+% \item the arabic page number of the page with the position,
+% \item the grid base, that was valid for this position,
+% \item the grid interval, that was valid for this position,
+% \item the x-coordinate of the absolute position,
+% \item the y-coordinate of the absolute position.
+% \end{itemize}
% \begin{macrocode}
-\newcommand*{\savepos}[1]{%
+\newcommand*{\SavePos}[1]{%
\begingroup
- \pdfsavepos
+ \gridset@savepos
\protected@write\@auxout{}{%
\protect\newpos{#1}{\the\count\z@}{\gridbase}{\gridinterval}{%
- \noexpand\number\pdflastxpos
+ \noexpand\number\gridset@lastxpos
}{%
- \noexpand\number\pdflastypos
+ \noexpand\number\gridset@lastypos
}%
}%
\endgroup
}
+\ifx\savepos\gridset@savepos
+ \PackageInfo{gridset}{LuaTeX detected.\MessageBreak
+ Note, gridset command is \string\SavePos\MessageBreak
+ but not \string\savepos, which is\MessageBreak
+ a LuaTeX primitive
+ }%
+\else
+ \PackageInfo{gridset}{\string\savepos\space defined as an alias of
+ \string\SavePos}%
+ \newcommand*{\savepos}{\SavePos}%
+\fi
% \end{macrocode}
% \end{macro}
+% \end{macro}
%
% \begin{macro}{\newpos}
% This is the command, that has been written to the \texttt{aux}-file.
@@ -377,10 +436,10 @@ about the files the work consists of.
%
% \begin{macro}{\vskipnextgrid}
% \begin{macro}{gridcnt}
-% Move to next grid position. The counter \texttt{gridcnt} is used to give
-% every move to position a unique position name. The names are
-% `\texttt{vp!\meta{number of the move to position}}'. You may use this to
-% get informations e.g. about the last move to position.
+% Move to next grid position. The counter \texttt{gridcnt} is used to give
+% every move to position a unique position name. The names are
+% `\texttt{vp!\meta{number of the move to position}}'. You may use this to
+% get informations e.g. about the last move to position.
% \begin{macrocode}
\newcounter{gridcnt}
\newcommand*{\vskipnextgrid}{%
@@ -388,13 +447,13 @@ about the files the work consists of.
\stepcounter{gridcnt}\edef\@tempa{vp!\thegridcnt}%
\ifvmode
% \end{macrocode}
-% \cs{pdfsavepos} in vertical mode is a problem, because the base line
-% alignment will be done at least at paragraph breaking. Because of this,
-% we have to leave the vertical mode and do it then. But remark: If you
-% change the base line skip e.g. changing the font size, the next line would
-% not be grid aligned!
+% \cs{pdfsavepos} in vertical mode is a problem, because the base line
+% alignment will be done at least at paragraph breaking. Because of this,
+% we have to leave the vertical mode and do it then. But remark: If you
+% change the base line skip e.g. changing the font size, the next line would
+% not be grid aligned!
% \begin{macrocode}
- \leavevmode\savepos{\@tempa}%
+ \leavevmode\SavePos{\@tempa}%
\expandafter\ifx\csname pos@\@tempa @vskip\endcsname\relax
\else
\expandafter\ifnum \csname pos@\@tempa @vskip\endcsname =\z@\else
@@ -407,30 +466,49 @@ about the files the work consists of.
\fi
\else
% \end{macrocode}
-% \cs{pdfsavepos} in horizontal mode is a problem too, because we have to
-% enter the vertical mode to do vertical skips. Because of this, the remark
-% is the same like the vertical mode remark.
+% \cs{pdfsavepos} in horizontal mode is a problem too, because we have to
+% enter the vertical mode to do vertical skips. Because of this, the remark
+% is the same like the vertical mode remark.
% \begin{macrocode}
\parskip=\z@
- \savepos{vp!\thegridcnt}%
+ \SavePos{vp!\thegridcnt}%
\expandafter\ifx\csname pos@\@tempa @vskip\endcsname\relax
\else
\expandafter\ifnum \csname pos@\@tempa @vskip\endcsname =\z@\else
- \PackageInfo{gridset}{%
+ \PackageInfo{gridset}{%
hmode \string\vskip\csname pos@\@tempa @vskip\endcsname sp%
}%
- \vskip -\baselineskip
- \expandafter\vskip\csname pos@\@tempa @vskip\endcsname sp\relax
+ \vskip \dimexpr -\baselineskip
+ + \csname pos@\@tempa @vskip\endcsname sp\relax
+% \end{macrocode}
+% \changes{v0.3}{2020/02/12}{support for twocolumn mode}
+% In twocolumn mode we have to take care that in the second column we reduce
+% the horizontal movement by the width of the first column plus the column
+% separation.
+% Note: This may fail, because the column information may be wrong
+% outside the output routine. Maybe we should add this information to
+% \cs{SavePos} or correct the x-pos there.
+% \begin{macrocode}
+ \leavevmode
\if@twoside
\expandafter\ifodd\csname pos@\@tempa @page\endcsname\relax
- \leavevmode\hskip \dimexpr - 1in - \oddsidemargin - \parindent
+ \hskip \dimexpr -1in - \oddsidemargin - \parindent
+ \if@twocolumn\if@firstcolumn\else
+ - \columnwidth - \columnsep
+ \fi\fi
+ \csname pos@\@tempa @x\endcsname sp\relax
\else
- \leavevmode\hskip \dimexpr - 1in - \evensidemargin - \parindent
+ \hskip \dimexpr -1in - \evensidemargin - \parindent
+ \if@twocolumn\if@firstcolumn\else
+ - \columnwidth - \columnsep
+ \fi\fi
+ \csname pos@\@tempa @x\endcsname sp\relax
\fi
\else
- \leavevmode\hskip \dimexpr - 1in - \oddsidemargin - \parindent
+ \hskip \dimexpr -1in - \oddsidemargin - \parindent
+ \if@twocolumn\if@firstcolumn\else
+ - \columnwidth - \columnsep
+ \fi\fi
+ \csname pos@\@tempa @x\endcsname sp\relax
\fi
\fi
@@ -475,7 +553,7 @@ about the files the work consists of.
\csname endinput\endcsname
%</FALSE>
%</package>
-% \fi ^^A meta-comment
+% \fi
%
% \section{Example}
%
@@ -483,7 +561,7 @@ about the files the work consists of.
% runs until no new rerun warning occurs.
% \iffalse meta-comment
%<*example>
-% \fi ^^A meta-comment
+% \fi
% \begin{macrocode}
\documentclass[a4paper,12pt]{article}
\usepackage{gridset}
@@ -499,7 +577,7 @@ about the files the work consists of.
\@whilenum \value{Zeile}<40\do {%
\stepcounter{Zeile}%
\theZeile. Zeile:
- \savepos{\thepage.\theZeile}\thegridinfo{\thepage.\theZeile}\par
+ \SavePos{\thepage.\theZeile}\thegridinfo{\thepage.\theZeile}\par
}%
\makeatother
\clearpage
@@ -508,7 +586,7 @@ about the files the work consists of.
\@whilenum \value{Zeile}<20\do {%
\stepcounter{Zeile}%
\theZeile. Zeile:
- \savepos{\thepage.\theZeile}\theposinfo{\thepage.\theZeile}\par
+ \SavePos{\thepage.\theZeile}\theposinfo{\thepage.\theZeile}\par
}%
\makeatother
\clearpage
@@ -518,7 +596,7 @@ about the files the work consists of.
\@whilenum \value{Zeile}<20\do {%
\stepcounter{Zeile}%
\theZeile. Zeile:
- \savepos{\thepage.\theZeile}\theposinfo{\thepage.\theZeile}\par
+ \SavePos{\thepage.\theZeile}\theposinfo{\thepage.\theZeile}\par
}%
\makeatother
\clearpage
@@ -556,7 +634,7 @@ at hmode}%
% \end{macrocode}
% \iffalse meta-comment
%</example>
-% \fi ^^A meta-comment
+% \fi
%
% \Finale
%
@@ -564,9 +642,7 @@ at hmode}%
%
% end of `gridset.dtx'
%
-% \iffalse meta-comment
%%% Local Variables:
%%% mode: docTeX
%%% TeX-master: t
%%% End:
-% \fi ^^A meta-comment
diff --git a/Master/texmf-dist/source/latex/gridset/gridset.ins b/Master/texmf-dist/source/latex/gridset/gridset.ins
deleted file mode 100644
index 8e0abd49d91..00000000000
--- a/Master/texmf-dist/source/latex/gridset/gridset.ins
+++ /dev/null
@@ -1,90 +0,0 @@
-%%
-%% This is file `gridset.ins',
-%% generated with the docstrip utility.
-%%
-%% The original source files were:
-%%
-%% gridset.dtx (with options: `ins')
-%% Copyright (c) Markus Kohm 2008
-%%
-%% IMPORTANT NOTE:
-%%
-%% This is a generated file and you are not allowed to distribute it
-%% without the source ot the work. See below about more informations
-%% about the files the work consists of.
-%%
-%% This work may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either version 1.3
-%% of this license or (at your option) any later version.
-%% The latest version of this license is in
-%% http://www.latex-project.org/lppl.txt
-%% and version 1.3 or later is part of all distributions of LaTeX
-%% version 2003/12/01 or later.
-%%
-%% This work has the LPPL maintenance status "maintained".
-%%
-%% The author of the initial version of these work was
-%% Markus Kohm <komascript@gmx.info>
-%%
-%% This work consists of the files gridset.dtx and README.
-%%
-%% Important Recommendation:
-%% The LPPL requires that distributions of the Work contain all the files of
-%% the Work (see ``Important Recommendations'' at lppl.txt).
-%%
-\def\batchfile{gridset.ins}
- \input docstrip.tex
-
- \ifToplevel{%
- \let\ifalpha\iffalse
- }
- \keepsilent
- \askforoverwritefalse
- \usedir{tex/latex/gridset}
- \preamble
-Copyright (c) Markus Kohm 2008
-
-IMPORTANT NOTE:
-
-This is a generated file and you are not allowed to distribute it
-without the source ot the work. See below about more informations
-about the files the work consists of.
-
-\endpreamble
-
- \generate{%
- \file{gridset.tex}{\from{gridset.dtx}{tex}}%
- \file{gridset.ins}{\from{gridset.dtx}{ins}}%
- \file{gridsetx.sty}{\from{gridset.dtx}{package}}%
- \file{gridsetexample.tex}{\from{gridset.dtx}{example}}%
- }
-
- \ifToplevel{%
- \Msg{*********************************************************************}
- \Msg{*}
- \Msg{* gridset}
- \Msg{* =======}
- \Msg{*}
- \ifalpha% ALPHA
- \Msg{* THIS IS AN ALPHA VERSION!}
- \Msg{* DON'T USE IT ONLY TEST IT!}
- \Msg{*}
- \fi
- \Msg{* To finish the installation run}
- \Msg{* \space\space latex gridset.dtx}
- \Msg{* or}
- \Msg{* \space\space pdflatex gridset.dtx}
- \Msg{* and then copy}
- \Msg{* \space\space gridset.sty to .../tex/latex/gridset/}
- \Msg{* \space\space gridset.dvi or gridset.pdf to .../doc/latex/gridset/}
- \Msg{* \space\space gridset.dtx and README to .../source/latex/gridset/}
- \Msg{* where .../ is your local TDS tree.}
- \Msg{* On some systems you'll get the local TDS tree using:}
- \Msg{* \space\space kpsewhich -var-value=TEXMFLOCAL}
- \Msg{*}
- \Msg{*********************************************************************}
- }
-
-\endinput
-%%
-%% End of file `gridset.ins'.
diff --git a/Master/texmf-dist/tex/latex/gridset/gridset.sty b/Master/texmf-dist/tex/latex/gridset/gridset.sty
index 67adeb198b0..00a11c2c83e 100644
--- a/Master/texmf-dist/tex/latex/gridset/gridset.sty
+++ b/Master/texmf-dist/tex/latex/gridset/gridset.sty
@@ -1,249 +1,75 @@
-% \CheckSum{416}
-% \iffalse meta-comment
-%
-% gridset.dtx
-%
+%%
+%% This is file `gridset.sty',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% gridset.dtx (with options: `package')
+%%
+%% IMPORTANT NOTE:
+%%
+%% This is a generated file and you are not allowed to distribute it
+%% without the source ot the work. See below about more informations
+%% about the files the work consists of.
+%%
+%% Copyright (C) 2008-2020 Markus Kohm
+%%
%% This work may be distributed and/or modified under the
-%% conditions of the LaTeX Project Public License, either version 1.3
+%% conditions of the LaTeX Project Public License, either version 1.3c
%% of this license or (at your option) any later version.
%% The latest version of this license is in
%% http://www.latex-project.org/lppl.txt
-%% and version 1.3 or later is part of all distributions of LaTeX
-%% version 2003/12/01 or later.
+%% and version 1.3c or later is part of all distributions of LaTeX
+%% version 2005/12/01 or later.
%%
%% This work has the LPPL maintenance status "maintained".
%%
-%% The author of the initial version of these work was
-%% Markus Kohm <komascript@gmx.info>
+%% The author and current maintainer of this work is
+%% Markus Kohm <komascript@gmx.info>.
%%
-%% This work consists of the files gridset.dtx and README.
+%% This work consists of the files gridset.dtx and README.md.
%%
%% Important Recommendation:
-%% The LPPL requires that distributions of the Work contain all the files of
-%% the Work (see ``Important Recommendations'' at lppl.txt).
+%% The LPPL requires that distributions of the Work contain all the files of
+%% the Work (see ``Important Recommendations'' at lppl.txt).
%%
-%
-%<*dtx>
-\def\FmtName{LaTeX2e}
-\ifx\FmtName\fmtname
- % Give me the package or the documentation
- \ifnum \catcode`\@=12\relax
- % Give me the documentation
- \ProvidesFile{gridset.dtx}
-%</dtx>
-%<*dtx|tex|package|example>
-%<package>\ProvidesPackage{gridset}
-%<tex>\ProvidesFile{gridset.tex}
-%<example>\ProvidesFile{gridsetexample.tex}
- [2008/11/12 v0.1 grid - aka in-register - setting]
-%</dtx|tex|package|example>
-%<*dtx|tex>
- \documentclass{ltxdoc}
- \begin{document}
- \RecordChanges
-%<*!tex>
- \GetFileInfo{gridset.dtx}
-%</!tex>
-%<tex> \GetFileInfo{gridset.tex}
- \DocInput{gridset.dtx}
-%<tex>\end{document}
-%</dtx|tex>
-%<*dtx>
- \expandafter\expandafter\expandafter\enddocument
- \fi
-\else
- % Make the package
- \def\batchfile{gridset.dtx}
- \let\batchendinput\endinput
-%</dtx>
-%<*ins>
-%<ins>\def\batchfile{gridset.ins}
- \input docstrip.tex
-
- \ifToplevel{%
- \let\ifalpha\iffalse
- }
- \keepsilent
- \askforoverwritefalse
- \usedir{tex/latex/gridset}
- \preamble
-Copyright (c) Markus Kohm 2008
-
-IMPORTANT NOTE:
-
-This is a generated file and you are not allowed to distribute it
-without the source ot the work. See below about more informations
-about the files the work consists of.
-
-\endpreamble
-
- \generate{%
- \file{gridset.tex}{\from{gridset.dtx}{tex}}%
- \file{gridset.ins}{\from{gridset.dtx}{ins}}%
- \file{gridsetx.sty}{\from{gridset.dtx}{package}}%
- \file{gridsetexample.tex}{\from{gridset.dtx}{example}}%
- }
-
- \ifToplevel{%
- \Msg{*********************************************************************}
- \Msg{*}
- \Msg{* gridset}
- \Msg{* =======}
- \Msg{*}
- \ifalpha% ALPHA
- \Msg{* THIS IS AN ALPHA VERSION!}
- \Msg{* DON'T USE IT ONLY TEST IT!}
- \Msg{*}
+\ProvidesPackage{gridset}
+ [2020-02-12 v0.3 grid - a.k.a. in-register - setting]
+\newcommand*{\gridset@luaorpdf}[1]{%
+ \expandafter\newcommand\csname gridset@#1\endcsname{}%
+ \ifcsname pdf#1\endcsname
+ \expandafter\let\csname gridset@#1\expandafter\endcsname
+ \csname pdf#1\endcsname
+ \else
+ \ifcsname #1\endcsname
+ \expandafter\let\csname gridset@#1\expandafter\endcsname
+ \csname #1\endcsname
+ \else
+ \PackageError{gridset}{%
+ neither \expandafter\string\csname #1\endcsname\space
+ nor \xpandafter\string\csname pdf#1\endcsname\space
+ defined%
+ }{This package needs either PDFTeX or LuaTeX or XeTeX.}%
\fi
- \Msg{* To finish the installation run}
- \Msg{* \space\space latex gridset.dtx}
- \Msg{* or}
- \Msg{* \space\space pdflatex gridset.dtx}
- \Msg{* and then copy}
- \Msg{* \space\space gridset.sty to .../tex/latex/gridset/}
- \Msg{* \space\space gridset.dvi or gridset.pdf to .../doc/latex/gridset/}
- \Msg{* \space\space gridset.dtx and README to .../source/latex/gridset/}
- \Msg{* where .../ is your local TDS tree.}
- \Msg{* On some systems you'll get the local TDS tree using:}
- \Msg{* \space\space kpsewhich -var-value=TEXMFLOCAL}
- \Msg{*}
- \Msg{*********************************************************************}
-%<*!ins>
- \csname fi\endcsname\csname fi\endcsname\endinput
-%</!ins>
- }
-
-%</ins>
-%<*dtx>
-\fi
-\csname batchendinput\endcsname
-%</dtx>
-% \fi ^^A meta-comment
-%
-% \title{Semi-Manual Grid Setting Using \textsf{gridset}\iftrue^^A ALPHA
-% \footnote{This is an alpha version! Don't use it! Only test it! There's no
-% support and everything may change!}\fi
-% }
-% \author{Markus Kohm}
-% \date{\filedate~\fileversion}
-% \maketitle
-% \begin{abstract}
-% Grid setting\,---\,also known as strict in-register setting\,---\,is
-% something, that should be done for a lot of documents but is not easy
-% using \LaTeX{}. Package \textsf{gridset} helps to get the information
-% needed for grid setting. It does not implement auto grid setting, but
-% there is a command \cs{vskipnextgrid}, that moves to the next grid
-% position. This may be enough under some circumstances. In other
-% circumstances it may fail. So \textsf{gridset} is only one more step for
-% grid setting not a complete solution.
-% \end{abstract}
-% \tableofcontents
-% \section{User Manual}
-%
-% \DescribeMacro{\gridinterval}%
-% This macro contains a number without unit! The number is the distance
-% between two grid lines in unit `scale points' (sp). You may set it so
-% another value using, e.g.
-% \begin{flushleft}
-% |\newlength{\|\meta{name of your length}|}|\\
-% |\setlength{\|\meta{name of your length}|}{|\meta{new length value}|}|\\
-% |\newcounter{\|\meta{name of your counter}|}|\\
-% |\setcounter{\|\meta{name of your counter}|}{\|\meta{name of your
-% length}|}|\\
-% |\edef\gridinterval{\|\meta{name of your length}|}|\\
-% \end{flushleft}
-%
-% \DescribeMacro{\gridbase}%
-% This macro contains an integer number, that represents the y-coordinate of
-% the upper start of the grid. If you want to change it, just save a position
-% and \cs{edef} the \cs{gridbase} to the y-pos of that position.
-%
-% Most time you don't need to change \cs{gridinterval} and \cs{gridposition},
-% because they are initialized to a base line grid at start of first page.
-% Because of this, it doesn't matter, that changing them is not really user
-% friendly.
-%
-% \DescribeMacro{\savepos}%
-% \cs{savepos}\marg{unique name} saves informations about the current position
-% to the \texttt{aux}-file. These informations are read at next \LaTeX{} run
-% and may be used (see \cs{the\dots} commands below) then. The \meta{unique
-% name} has to be a position name, that is unique for all saved position
-% informations of the current document.
-%
-% \DescribeMacro{\vskipnextgrid}
-% This command moves to the next grid position. To achieve this, a position
-% information is saved at this and used at next \LaTeX{} run. The used name
-% of the position information is \texttt{vb!\meta{number of
-% skip}}. \meta{number of skip} is the number of the current
-% \cs{vskipnextgrid} usage. Counter \texttt{gridcnt} is used to number the
-% usage of \cs{vskipnextgrid}.
-%
-% \DescribeMacro{\thegridinfo}
-% \cs{thegridinfo}\marg{name} outputs
-% \begin{itemize}
-% \item arabic page number of the named position,
-% \item grid base, that was valid saving the information of the named
-% position,
-% \item grid interval, that was valid saving the information of the named
-% position,
-% \item x-coordinate of the named position,
-% \item y-coordinate of the named position.
-% \end{itemize}
-% The coordinates and intervals are numbers without units. The unit is `scale
-% points' (sp).
-%
-% \DescribeMacro{\theposinfo}
-% \cs{theposinfo}\marg{name} outputs
-% \begin{itemize}
-% \item y-coordinate of the named position,
-% \item grid line number (first is 0) of the next grid position,
-% \item offset of the next grid position from grid base,
-% \item distance to the next grid position.
-% \end{itemize}
-% The coordinates, offsets and distances are numbers without units. The unit
-% is `scale points' (sp).
-%
-% \DescribeMacro{\theypos}
-% \cs{theypos}\marg{name} outputs the y-coordinate of the named position.
-%
-%
-% \StopEventually{\PrintIndex\PrintChanges}
-%
-% \section{Implementation}
-%
-% \iffalse meta-comment
-%<*package>
-% \fi ^^A meta-comment
-% \begin{macrocode}
-%<package>\ProvidesPackage{gridset}[\fileversion\space (package)]
-% \end{macrocode}
-%
-% \begin{macro}{\gridbase}
-% \begin{macro}{\gridinterval}
-% These contain the grid information. \cs{gridbase} is a integer number
-% representing the absolute y coordinate of the upper end of the
-% grid relative to the same reference point \cs{pdfsavepos}
-% uses. \cs{gridinterval} is a integer number representing the distance of
-% two grid lines. The unit is `scaled point' (sp) both time.
-% \begin{macrocode}
+ \fi
+}
+\gridset@luaorpdf{pageheight}
+\gridset@luaorpdf{pagewidth}
+\gridset@luaorpdf{savepos}
+\gridset@luaorpdf{lastxpos}
+\gridset@luaorpdf{lastypos}
\newcommand*{\gridbase}{}
\newcommand*{\gridinterval}{}
-% \end{macrocode}
-% \cs{gridbase} and \cs{gridinterval} need to be initialized at the start of
-% the first page (fixme: shouldn't this be done at the start of every
-% page?). We use this occasion to also initialize \cs{pdfpageheight} and
-% \cs{pdfpagewidth} if this hasn't been done already.
-% \begin{macrocode}
\AtBeginDocument{%
- \ifdim\pdfpageheight=\z@
- \pdfpageheight=\pageheight
+ \ifdim\gridset@pageheight=\z@
+ \gridset@pageheight=\paperheight
\fi
- \ifdim\pdfpagewidth=\z@
- \pdfpagewidth=\pagewidth
+ \ifdim\gridset@pagewidth=\z@
+ \gridset@pagewidth=\paperwidth
\fi
\begingroup
- \@tempdima=\dimexpr \pdfpageheight - \topmargin - 1in
- - \headheight - \headsep
+ \@tempdima=\dimexpr \gridset@pageheight - \topmargin - 1in
+ - \headheight - \headsep
- \topskip \relax
\@tempcnta=\@tempdima
\xdef\gridbase{\the\@tempcnta}%
@@ -251,67 +77,29 @@ about the files the work consists of.
\xdef\gridinterval{\the\@tempcnta}%
\endgroup
}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\savepos}
-% Save current position on the page to the \texttt{aux}-file. The argument
-% is a unique name for the position. The saved informations are:
-% \begin{itemize}
-% \item the name of the position,
-% \item the arabic page number of the page with the position,
-% \item the grid base, that was valid for this position,
-% \item the grid interval, that was valid for this position,
-% \item the x-coordinate of the absolute position,
-% \item the y-coordinate of the absolute position.
-% \end{itemize}
-% \begin{macrocode}
-\newcommand*{\savepos}[1]{%
+\newcommand*{\SavePos}[1]{%
\begingroup
- \pdfsavepos
+ \gridset@savepos
\protected@write\@auxout{}{%
\protect\newpos{#1}{\the\count\z@}{\gridbase}{\gridinterval}{%
- \noexpand\number\pdflastxpos
+ \noexpand\number\gridset@lastxpos
}{%
- \noexpand\number\pdflastypos
+ \noexpand\number\gridset@lastypos
}%
}%
\endgroup
}
-% \end{macrocode}
-% \end{macro}
-%
-% \begin{macro}{\newpos}
-% This is the command, that has been written to the \texttt{aux}-file.
-% Reading the \texttt{aux}-file it defines several position dependant macros
-% to store the position information. Reading the \texttt{aux}-file while
-% \cs{begin{document}} a double definition test is done. Reading the
-% \texttt{aux}-file while \cs{end{document}} a test is done, if the position
-% has been changed and notes the user about needed additional \LaTeX{} runs.
-% (fixme: shouldn't the test be done with the x- and the y-coordinate
-% instead of the vskip only?)
-% The defined macros are:
-% \begin{description}
-% \item[\cs{pos@\meta{position name}@page}] the arabic page number of the
-% position
-% \item[\cs{pos@\meta{position name}@base}] the valid grid base while
-% saving the position
-% \item[\cs{pos@\meta{position name}@interval}] the valid grid interval
-% while saving the position
-% \item[\cs{pos@\meta{position name}@x}] the x-coordinate of the position
-% \item[\cs{pos@\meta{position name}@y}] the y-coordinate of the postion
-% \item[\cs{pos@\meta{position name}@line}] the number of the next grid line
-% for the position (first grid line has number 0)
-% \item[\cs{pos@\meta{position name}@offset}] distance of the next grid line
-% from the grid base
-% \item[\cs{pos@\meta{position name}@vskip}] distance to the next grid line
-% for the position
-% \end{description}
-% All values are integers. The unit to all values is `scaled points'
-% (sp). See \cs{pdfsavepos} at the pdf\TeX{} user manual for more
-% information.
-% \begin{macrocode}
+\ifx\savepos\gridset@savepos
+ \PackageInfo{gridset}{LuaTeX detected.\MessageBreak
+ Note, gridset command is \string\SavePos\MessageBreak
+ but not \string\savepos, which is\MessageBreak
+ a LuaTeX primitive
+ }%
+\else
+ \PackageInfo{gridset}{\string\savepos\space defined as an alias of
+ \string\SavePos}%
+ \newcommand*{\savepos}{\SavePos}%
+\fi
\newcommand*{\newpos}[6]{%
\grid@unique@test{#1}{#2}%
\expandafter\global\@namedef{pos@#1@page}{#2}%
@@ -326,7 +114,7 @@ about the files the work consists of.
\expandafter\xdef\csname pos@#1@line\endcsname{\the\@tempcnta}%
\@tempcnta=\numexpr \@tempcnta * \@nameuse{pos@#1@interval}\relax
\expandafter\xdef\csname pos@#1@offset\endcsname{\the\@tempcnta}%
- \@tempcnta=\numexpr \@nameuse{pos@#1@y}
+ \@tempcnta=\numexpr \@nameuse{pos@#1@y}
- ( \@nameuse{pos@#1@base} - \@tempcnta )\relax
\expandafter\let\expandafter\@tempa\csname pos@#1@vskip\endcsname%
\expandafter\xdef\csname pos@#1@vskip\endcsname{\the\@tempcnta}%
@@ -335,10 +123,6 @@ about the files the work consists of.
\fi
\endgroup
}
-% \end{macrocode}
-% \begin{macro}{\grid@unique@test}
-% A very simple test to warn if a position name isn't unique.
-% \begin{macrocode}
\newcommand*{\grid@unique@test}[2]{%
\expandafter\ifx\csname pos@#1@page\endcsname\relax\else
\PackageError{gridset}{position `#1' is not unique.\@gobble}{%
@@ -355,13 +139,6 @@ about the files the work consists of.
\AtBeginDocument{%
\global\let\grid@unique@test\@gobble
}
-% \end{macrocode}
-% \end{macro}
-% \begin{macro}{\grid@ReRunMessage}
-% The change test will be done for each \cs{newpos} but one user information
-% at the end of the document should be enough. So we use a message macro,
-% that destroys itself after first usage.
-% \begin{macrocode}
\newcommand*\grid@ReRunMessage{}
\AtBeginDocument{%
\renewcommand*\grid@ReRunMessage{%
@@ -371,30 +148,12 @@ about the files the work consists of.
\global\let\grid@ReRunMessage\relax
}%
}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\vskipnextgrid}
-% \begin{macro}{gridcnt}
-% Move to next grid position. The counter \texttt{gridcnt} is used to give
-% every move to position a unique position name. The names are
-% `\texttt{vp!\meta{number of the move to position}}'. You may use this to
-% get informations e.g. about the last move to position.
-% \begin{macrocode}
\newcounter{gridcnt}
\newcommand*{\vskipnextgrid}{%
\begingroup
\stepcounter{gridcnt}\edef\@tempa{vp!\thegridcnt}%
\ifvmode
-% \end{macrocode}
-% \cs{pdfsavepos} in vertical mode is a problem, because the base line
-% alignment will be done at least at paragraph breaking. Because of this,
-% we have to leave the vertical mode and do it then. But remark: If you
-% change the base line skip e.g. changing the font size, the next line would
-% not be grid aligned!
-% \begin{macrocode}
- \leavevmode\savepos{\@tempa}%
+ \leavevmode\SavePos{\@tempa}%
\expandafter\ifx\csname pos@\@tempa @vskip\endcsname\relax
\else
\expandafter\ifnum \csname pos@\@tempa @vskip\endcsname =\z@\else
@@ -406,31 +165,36 @@ about the files the work consists of.
\fi
\fi
\else
-% \end{macrocode}
-% \cs{pdfsavepos} in horizontal mode is a problem too, because we have to
-% enter the vertical mode to do vertical skips. Because of this, the remark
-% is the same like the vertical mode remark.
-% \begin{macrocode}
\parskip=\z@
- \savepos{vp!\thegridcnt}%
+ \SavePos{vp!\thegridcnt}%
\expandafter\ifx\csname pos@\@tempa @vskip\endcsname\relax
\else
\expandafter\ifnum \csname pos@\@tempa @vskip\endcsname =\z@\else
- \PackageInfo{gridset}{%
+ \PackageInfo{gridset}{%
hmode \string\vskip\csname pos@\@tempa @vskip\endcsname sp%
}%
- \vskip -\baselineskip
- \expandafter\vskip\csname pos@\@tempa @vskip\endcsname sp\relax
+ \vskip \dimexpr -\baselineskip
+ + \csname pos@\@tempa @vskip\endcsname sp\relax
+ \leavevmode
\if@twoside
\expandafter\ifodd\csname pos@\@tempa @page\endcsname\relax
- \leavevmode\hskip \dimexpr - 1in - \oddsidemargin - \parindent
+ \hskip \dimexpr -1in - \oddsidemargin - \parindent
+ \if@twocolumn\if@firstcolumn\else
+ - \columnwidth - \columnsep
+ \fi\fi
+ \csname pos@\@tempa @x\endcsname sp\relax
\else
- \leavevmode\hskip \dimexpr - 1in - \evensidemargin - \parindent
+ \hskip \dimexpr -1in - \evensidemargin - \parindent
+ \if@twocolumn\if@firstcolumn\else
+ - \columnwidth - \columnsep
+ \fi\fi
+ \csname pos@\@tempa @x\endcsname sp\relax
\fi
\else
- \leavevmode\hskip \dimexpr - 1in - \oddsidemargin - \parindent
+ \hskip \dimexpr -1in - \oddsidemargin - \parindent
+ \if@twocolumn\if@firstcolumn\else
+ - \columnwidth - \columnsep
+ \fi\fi
+ \csname pos@\@tempa @x\endcsname sp\relax
\fi
\fi
@@ -438,19 +202,6 @@ about the files the work consists of.
\fi
\endgroup
}
-% \end{macrocode}
-% (fixme: A better solution would be to first move and then set the
-% position. But that solution needs some more tests and maybe some more
-% ideas, because after moving the position is on grid and so the saved x-pos
-% would be on grid.)
-% \end{macro}
-% \end{macro}
-%
-% \begin{macro}{\thegridinfo}
-% \begin{macro}{\theposinfo}
-% \begin{macro}{\theypos}
-% Some informations about the grid (valid for a position) or the position.
-% \begin{macrocode}
\newcommand*{\thegridinfo}[1]{%
page=\@nameuse{pos@#1@page},
base=\@nameuse{pos@#1@base},
@@ -465,108 +216,6 @@ about the files the work consists of.
movedown=\@nameuse{pos@#1@vskip}%
}
\newcommand*{\theypos}[1]{\@nameuse{pos@#1@y}}
-% \end{macrocode}
-% \end{macro}
-% \end{macro}
-% \end{macro}
-%
-% \iffalse meta-comment
-%<*FALSE>
-\csname endinput\endcsname
-%</FALSE>
-%</package>
-% \fi ^^A meta-comment
-%
-% \section{Example}
-%
-% You may try the following example document. You have to do several \LaTeX{}
-% runs until no new rerun warning occurs.
-% \iffalse meta-comment
-%<*example>
-% \fi ^^A meta-comment
-% \begin{macrocode}
-\documentclass[a4paper,12pt]{article}
-\usepackage{gridset}
-\usepackage{blindtext}
-\raggedbottom
-
-\pagestyle{myheadings}
-
-\begin{document}
-\markright{gridbase=\gridbase, gridinterval=\gridinterval\ without move down}%
-\newcounter{Zeile}%
-\makeatletter
-\@whilenum \value{Zeile}<40\do {%
- \stepcounter{Zeile}%
- \theZeile. Zeile:
- \savepos{\thepage.\theZeile}\thegridinfo{\thepage.\theZeile}\par
-}%
-\makeatother
-\clearpage
-\setcounter{Zeile}{0}
-\makeatletter
-\@whilenum \value{Zeile}<20\do {%
- \stepcounter{Zeile}%
- \theZeile. Zeile:
- \savepos{\thepage.\theZeile}\theposinfo{\thepage.\theZeile}\par
-}%
-\makeatother
-\clearpage
-\parskip=.5\baselineskip
-\setcounter{Zeile}{0}
-\makeatletter
-\@whilenum \value{Zeile}<20\do {%
- \stepcounter{Zeile}%
- \theZeile. Zeile:
- \savepos{\thepage.\theZeile}\theposinfo{\thepage.\theZeile}\par
-}%
-\makeatother
-\clearpage
-\markright{gridbase=\gridbase, gridinterval=\gridinterval\ with real move down
-at vmode}%
-\parskip=.5\baselineskip
-\setcounter{Zeile}{0}
-\makeatletter
-\@whilenum \value{Zeile}<25\do {%
- \stepcounter{Zeile}%
- \vskipnextgrid\theZeile. Zeile: \theposinfo{vp!\thegridcnt}\par
-}%
-\makeatother
-\clearpage
-\markright{gridbase=\gridbase, gridinterval=\gridinterval\ with real move down
-at hmode}%
-\parskip=.5\baselineskip
-\setcounter{Zeile}{0}
-\makeatletter
-\@whilenum \value{Zeile}<25\do {%
- \stepcounter{Zeile}%
- \theZeile. Zeile: \vskipnextgrid\theposinfo{vp!\thegridcnt}\par
-}%
-\makeatother
-\clearpage
-\parskip=0pt
-\blindtext
-\begin{itemize}
-\item Test
-\item Test
-\end{itemize}
-\vskipnextgrid\theposinfo{vp!\thegridcnt}\blindtext
-
-\end{document}
-% \end{macrocode}
-% \iffalse meta-comment
-%</example>
-% \fi ^^A meta-comment
-%
-% \Finale
-%
\endinput
-%
-% end of `gridset.dtx'
-%
-% \iffalse meta-comment
-%%% Local Variables:
-%%% mode: docTeX
-%%% TeX-master: t
-%%% End:
-% \fi ^^A meta-comment
+%%
+%% End of file `gridset.sty'.