summaryrefslogtreecommitdiff
path: root/Master
diff options
context:
space:
mode:
Diffstat (limited to 'Master')
-rwxr-xr-xMaster/tlpkg/bin/tl-update-tlpdb51
-rwxr-xr-xMaster/tlpkg/bin/tlpsrc2tlpdb226
-rw-r--r--Master/tlpkg/doc/repository-setup.txt10
3 files changed, 51 insertions, 236 deletions
diff --git a/Master/tlpkg/bin/tl-update-tlpdb b/Master/tlpkg/bin/tl-update-tlpdb
index 3b74e04f60d..fd69fdc942e 100755
--- a/Master/tlpkg/bin/tl-update-tlpdb
+++ b/Master/tlpkg/bin/tl-update-tlpdb
@@ -31,6 +31,9 @@ my $opt_nobinsplit = 0;
my $opt_winwarning;
my $opt_fromfiles = 0;
my $opt_noautopatterns = 0;
+my $opt_norevisioncheck = 0;
+my $opt_tlpsrc_from_cmdline = 0;
+my $opt_output;
TeXLive::TLUtils::process_logging_options();
GetOptions(
@@ -38,8 +41,11 @@ GetOptions(
"catalogue=s" => \$opt_catalogue, # location of the TeX Catalogue
"no-bin-split!" => \$opt_nobinsplit,
"no-autopatterns" => \$opt_noautopatterns,
+ "no-revision-check" => \$opt_norevisioncheck,
"from-files" => \$opt_fromfiles,
+ "tlpsrc-from-cmdline" => \$opt_tlpsrc_from_cmdline,
"with-win-pattern-warning" => \$opt_winwarning,
+ "output=s" => \$opt_output,
"help|?" => \$help) or pod2usage(1);
pod2usage(-exitstatus => 0, -verbose => 2) if $help;
@@ -53,8 +59,18 @@ exit (&main ());
sub finish
{
my ($tlpdb, $pkgcount) = @_;
- $tlpdb->save;
- info ("$0: wrote $pkgcount packages to ". $tlpdb->root . ".\n");
+ if ($opt_output) {
+ if (open(OUT, ">$opt_output")) {
+ $tlpdb->writeout(\*OUT);
+ info ("$0: wrote $pkgcount packages to $opt_output.\n");
+ } else {
+ warn ("Cannot open $opt_output for writing");
+ exit 1;
+ }
+ } else {
+ $tlpdb->save;
+ info ("$0: wrote $pkgcount packages to ". $tlpdb->root . ".\n");
+ }
exit(0);
}
@@ -78,6 +94,10 @@ sub main
info("No checking on increasing revisions, no old tlpdb found\n");
finish($newtlpdb, $pkgcount);
}
+ if ($opt_norevisioncheck) {
+ info("No checking on increasing revisions due to --no-revision-check\n");
+ finish($newtlpdb, $pkgcount);
+ }
if (compare_tlpdbs($oldtlpdb, $newtlpdb)) {
# compare_tlpdbs checks in dummy changes to the tlpsrc files
# now we check again and that should not give any changes!
@@ -123,9 +143,14 @@ sub create_tlpdb
$::tlpsrc_pattern_warn_win = 1;
}
my $tlpsrc_dir = "$opt_master/tlpkg/tlpsrc";
- # if we're regenerating the whole thing, get all our tlpsrc files.
- chdir ($tlpsrc_dir) || die "chdir($tlpsrc_dir) failed: $!";
- @ARGV = glob ("*.tlpsrc");
+
+ if (!$opt_tlpsrc_from_cmdline) {
+ # if not otherwise given use all tlpsrc files
+
+ # if we're regenerating the whole thing, get all our tlpsrc files.
+ chdir ($tlpsrc_dir) || die "chdir($tlpsrc_dir) failed: $!";
+ @ARGV = glob ("*.tlpsrc");
+ }
info ("$0: reading Master $opt_master ...\n");
my $tltree = TeXLive::TLTREE->new ("svnroot" => $opt_master);
@@ -227,6 +252,17 @@ Do NOT split files with binaries into several packages (one for the arch
independent and one for each of the architectures with only the respective
binaries). There is no reason to use this option.
+=item B<-tlpsrc-from-cmdline>
+
+by default, B<tl-update-tlpdb> recreates the tlpdb from all the tlpsrc
+files present in the current tree. If this option is given the tlpsrc
+have to be given on the command line.
+
+=item B<-output=filename>
+
+by default, B<tl-update-tlpdb> saves/updates the tlpdb in the default
+place. This option specifies the place where the output should go to.
+
=item B<-with-win-pattern-warning>
Normally, this program issues a warning for all patterns without a matching
file, but does I<not> warn for binpatterns when working on the win32
@@ -236,6 +272,11 @@ those where a binpattern on win32 does not hit.
=item B<-from-files>
Use find instead of svn -status to create the list of files.
+=item B<-no-revision-check>
+By default, B<tl-update-tlpdb> checks that in the generated tlpdb the
+revision numbers of packages are not going backward compared to the
+previous version. This option disables this check.
+
=back
The standard options B<-q>, B<-v>, and B<-logfile>=I<file> are also
diff --git a/Master/tlpkg/bin/tlpsrc2tlpdb b/Master/tlpkg/bin/tlpsrc2tlpdb
deleted file mode 100755
index ba4d0af0a19..00000000000
--- a/Master/tlpkg/bin/tlpsrc2tlpdb
+++ /dev/null
@@ -1,226 +0,0 @@
-#!/usr/bin/env perl
-# $Id$
-# convert a set of tlpsrc files (given as arguments) into tlpdb
-#
-# Copyright 2007, 2008, 2009 Norbert Preining
-# This file is licensed under the GNU General Public License version 2
-# or any later version.
-
-BEGIN {
- $^W = 1;
- chomp ($mydir = `dirname $0`);
- unshift (@INC, "$mydir/..");
-}
-
-use strict;
-
-use TeXLive::TLConfig;
-use TeXLive::TLPSRC;
-use TeXLive::TLPOBJ;
-use TeXLive::TLPDB;
-use TeXLive::TLTREE;
-use TeXLive::TLUtils;
-use Getopt::Long;
-use Pod::Usage;
-use File::Path;
-
-my $opt_all = 0;
-my $opt_catalogue = "";
-chomp (my $opt_master = `cd $::mydir/../.. && pwd`);
-my $help = 0;
-my $opt_nobinsplit = 0;
-my $opt_winwarning;
-my $opt_fromfiles = 0;
-my $opt_noautopatterns = 0;
-
-TeXLive::TLUtils::process_logging_options();
-GetOptions(
- "all!" => \$opt_all,
- "master=s" => \$opt_master, # location of the TL tree
- "catalogue=s" => \$opt_catalogue, # location of the TeX Catalogue
- "no-bin-split!" => \$opt_nobinsplit,
- "no-autopatterns" => \$opt_noautopatterns,
- "from-files" => \$opt_fromfiles,
- "with-win-pattern-warning" => \$opt_winwarning,
- "help|?" => \$help) or pod2usage(1);
-pod2usage(-exitstatus => 0, -verbose => 2) if $help;
-
-exit (&main ());
-
-
-sub main
-{
- if (! -d $opt_master) {
- die "$0: Master $opt_master not a directory, goodbye.\n";
- }
- if (defined($opt_winwarning)) {
- $::tlpsrc_pattern_warn_win = 1;
- }
- my $tlc = undef;
- if (! -d $opt_catalogue) {
- info ("$0: -c /Cat/a/logue not given, continuing without it.\n");
- } else {
- require TeXLive::TeXCatalogue; # not at compile time, for now anyway.
- info ("$0: reading TeX Catalogue $opt_catalogue ...\n");
- $tlc = TeXLive::TeXCatalogue->new ("location" => $opt_catalogue);
- }
-
- my $tlpsrc_dir = "$opt_master/tlpkg/tlpsrc";
- # if we're regenerating the whole thing, get all our tlpsrc files.
- if ($opt_all) {
- chdir ($tlpsrc_dir) || die "chdir($tlpsrc_dir) failed: $!";
- @ARGV = glob ("*.tlpsrc");
- }
-
- info ("$0: reading Master $opt_master ...\n");
- my $tltree = TeXLive::TLTREE->new ("svnroot" => $opt_master);
- if ($opt_fromfiles) {
- $tltree->init_from_files;
- } else {
- $tltree->init_from_svn;
- }
-
- info ("$0: updating from tlpsrc ...\n");
- my $tldb = TeXLive::TLPDB->new;
- my $src_count = 0;
- foreach my $f (@ARGV) {
- next if ($f =~ m/^00texlive\.autopatterns/);
- $src_count++ if $opt_all;
-
- my $tlsrc = new TeXLive::TLPSRC;
- $tlsrc->from_file ($f);
- my $tlp = $tlsrc->make_tlpobj ($tltree, $opt_master);
-
- (my $base_f = $f) =~ s/\.tlpsrc$//;
- warn "$f: package name " . $tlp->name . " does not match filename\n"
- if $tlp->name ne $base_f;
-
- if ($tlc) {
- # merge TeX Catalogue information
- $tlp->update_from_catalogue ($tlc);
- }
-
- # split bin packages off unless requested otherwise (no reason to so
- # request these days).
- unless ($opt_nobinsplit) {
- # packages which have already a .win32 extension or the
- # 00texlive.something package are NOT split, never!
- if ($tlp->name !~ m/\.win32/
- && $tlp->name !~ m/^00texlive/) {
- my @binobjs = $tlp->split_bin_package;
- foreach my $binobj (@binobjs) {
- # we recompute the revision numbers of the binary packages
- # since that might be much smaller, and we don't want to
- # update every package only because one binary for one arch
- # was changed
- $binobj->recompute_revision ($tltree, $tltree->file_svn_lastrevision("tlpkg/tlpsrc/$f"));
- $tldb->add_tlpobj ($binobj);
- }
- # we have to recompute the revision of the package itself
- # since the binfiles have been removed and that might lower the
- # revision number
- $tlp->recompute_revision ($tltree, $tltree->file_svn_lastrevision("tlpkg/tlpsrc/$f"));
- }
- }
- if ($tlp->name eq "00texlive.config") {
- my @bar = $tlp->depends;
- for my $k (keys %TeXLive::TLConfig::TLPDBConfigs) {
- push @bar, "$k/" . $TeXLive::TLConfig::TLPDBConfigs{$k};
- }
- push @bar, "revision/".$tltree->revision;
- $tlp->depends (@bar);
- }
- $tldb->add_tlpobj ($tlp);
- }
-
- # write the new db, to the real location given --all, or stdout.
- if ($opt_all) {
- $tldb->root ($opt_master);
-
- # do set the option_archs from the dirs in Master/bin
- my @archs = $tltree->architectures;
- $tldb->setting("available_architectures", @archs);
-
- # add default options
- $tldb->add_default_options();
- $tldb->save;
- info ("$0: wrote $src_count packages to ". $tldb->root . ".\n");
- } else {
- $tldb->writeout;
- }
- &debug ("$0: done.\n");
-
- return 0;
-}
-
-__END__
-
-=head1 NAME
-
-tlpsrc2tlpdb - generate a TeX Live database from tlpsrc files
-
-=head1 SYNOPSIS
-
-tlpsrc2tlpdb [OPTION]... [TLPSRC]...
-
-=head1 OPTIONS
-
-=over 4
-
-=item B<-all>
-Use all .tlpsrc files in C<Master/tlpkg/tlpsrc/*.tlpsrc>, and update the
-live database in C<Master/tlpkg/texlive.tlpdb>.
-(No repository operations are done.)
-
-=item B<-catalogue> I<Catalogue_dir>
-The location given by B<-catalogue> must point to a valid TeX Catalogue.
-No default value. If given, the generated tlpobj files will contain
-information gathered from the TeX Catalogue.
-
-=item B<-master> I<Master/dir>
-The location I<Master/dir> must point to a valid svn repository of TeX
-Live's Master directory. Defaults to C<../..> of C<$0>.
-
-=item B<-no-bin-split>
-Do NOT split files with binaries into several packages (one for the arch
-independent and one for each of the architectures with only the respective
-binaries). There is no reason to use this option.
-
-=item B<-with-win-pattern-warning>
-Normally, this program issues a warning for all patterns without a matching
-file, but does I<not> warn for binpatterns when working on the win32
-architecture. Giving this option makes it issues all warnings, i.e., also
-those where a binpattern on win32 does not hit.
-
-=item B<-from-files>
-Use find instead of svn -status to create the list of files.
-
-=back
-
-The standard options B<-q>, B<-v>, and B<-logfile>=I<file> are also
-accepted; see the C<process_logging_options> function in
-L<TeXLive::TLUtils> for details.
-
-=head1 DESCRIPTION
-
-B<tlpsrc2tlpdb> converts TeX Live source package files (tlpsrc) files into a
-TeX Live package database (tlpdb).
-
-If a TeX Catalogue hierarchy is specified, additional information from
-the catalogue are merged into the database (see L<TeXLive::TLPOBJ> for
-the list of included information from the TeX Catalogue).
-
-=head1 AUTHORS AND COPYRIGHT
-
-This script and its documentation were written for the TeX Live
-distribution (L<http://tug.org/texlive>) and both are licensed under the
-GNU General Public License Version 2 or later.
-
-=cut
-
-### Local Variables:
-### perl-indent-level: 2
-### tab-width: 2
-### indent-tabs-mode: nil
-### End:
-# vim:set tabstop=2 expandtab: #
diff --git a/Master/tlpkg/doc/repository-setup.txt b/Master/tlpkg/doc/repository-setup.txt
index 46195fc199d..d3b5f9b005b 100644
--- a/Master/tlpkg/doc/repository-setup.txt
+++ b/Master/tlpkg/doc/repository-setup.txt
@@ -152,19 +152,19 @@ the TLPSRC.pm documentation (and don't forget to copy
---------------------------------
If you have set up all your local files, and the tlpsrc files, you can
create the TeX Live Database in ROOT/tlpkg/texlive.tlpdb by calling
- perl ROOT/tlpkg/bin/tlpsrc2tlpdb -from-files -all
+ perl ROOT/tlpkg/bin/tl-update-tlpdb -from-files
The -from-files does use a find command to find all the files in ROOT
-instead of using "svn status" what is done normally. The -all makes
-tlpsrc2tlpdb work on all tlpsrc files present in ROOT/tlpkg/tlpsrc/.
+instead of using "svn status" what is done normally. By default
+tl-update-tlpdb uses all tlpsrc files present in ROOT/tlpkg/tlpsrc/.
Presumably this won't be very many files. But if you like, you can
-specify individual package names instead of -all.
+specify individual package names together with -tlpsrc-from-cmdline.
You can add the option
-with-win-pattern-warning
which will warn on missing files for Windows; some of those warnings are
by default suppressed.
-As usual, please read the documentation of tlpsrc2tlpdb (again in POD)
+As usual, please read the documentation of tl-update-tlpdb (again in POD)
for further information.
That process will probably show you some warnings; read them carefully.