diff options
Diffstat (limited to 'Master')
33 files changed, 648 insertions, 964 deletions
diff --git a/Master/texmf-dist/bibtex/bst/acmart/ACM-Reference-Format.bst b/Master/texmf-dist/bibtex/bst/acmart/ACM-Reference-Format.bst index 80ed3bb23f5..18bf3b82b6c 100644 --- a/Master/texmf-dist/bibtex/bst/acmart/ACM-Reference-Format.bst +++ b/Master/texmf-dist/bibtex/bst/acmart/ACM-Reference-Format.bst @@ -1358,7 +1358,19 @@ FUNCTION { format.series } { series empty.or.unknown {""} - {" \emph{(\bibinfo{series}{" * series "})}" *} + {" \emph{(\bibinfo{series}{" * series "}" * + volume empty.or.unknown + { + number empty.or.unknown + {")}" *} + {", \bibinfo{number}{" number "})}" * * *} + if$ + } + {", Vol.~\bibinfo{volume}{" volume "})}" * * * + "volume and number" number either.or.check + } + if$ + } if$ } @@ -2290,7 +2302,10 @@ FUNCTION { inproceedings } { format.in.emphasize.booktitle format.city "booktitle" output.check.dot.space format.series output.removenospace format.editors.fml output % BV 2011/09/27 Moved dot to comma - format.bvolume.noseries output + series empty.or.unknown + { format.bvolume.noseries output } + {} + if$ new.sentence organization output publisher "publisher" bibinfo.output.check % jtb: require publisher (?) diff --git a/Master/texmf-dist/doc/latex/acmart/README b/Master/texmf-dist/doc/latex/acmart/README index 8a23c4c2a58..1e042b99ff5 100644 --- a/Master/texmf-dist/doc/latex/acmart/README +++ b/Master/texmf-dist/doc/latex/acmart/README @@ -262,3 +262,10 @@ Version 1.69 Bug fixes Version 1.70 Title change for ACM/IMS Transactions on Data Science Bug fixes for bibliography + + +Version 1.71 Bug fixes + Formats sigchi and sigchi-a are retired + Bibliography formatting changes for @inproceedings entries + having both series and volume + LuaLaTeX now uses the same OTF fonts as XeTeX
\ No newline at end of file diff --git a/Master/texmf-dist/doc/latex/acmart/acmart.pdf b/Master/texmf-dist/doc/latex/acmart/acmart.pdf Binary files differindex 8c98fc64b66..ffb2bf26162 100644 --- a/Master/texmf-dist/doc/latex/acmart/acmart.pdf +++ b/Master/texmf-dist/doc/latex/acmart/acmart.pdf diff --git a/Master/texmf-dist/doc/latex/acmart/acmguide.pdf b/Master/texmf-dist/doc/latex/acmart/acmguide.pdf Binary files differindex 3fb7c9a5c69..63cf9ccaecf 100644 --- a/Master/texmf-dist/doc/latex/acmart/acmguide.pdf +++ b/Master/texmf-dist/doc/latex/acmart/acmguide.pdf diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-acmlarge.pdf b/Master/texmf-dist/doc/latex/acmart/samples/sample-acmlarge.pdf Binary files differindex d5ab7238d58..7ab264a9d49 100644 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-acmlarge.pdf +++ b/Master/texmf-dist/doc/latex/acmart/samples/sample-acmlarge.pdf diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-acmlarge.tex b/Master/texmf-dist/doc/latex/acmart/samples/sample-acmlarge.tex index 2270023c207..002e08c66f7 100644 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-acmlarge.tex +++ b/Master/texmf-dist/doc/latex/acmart/samples/sample-acmlarge.tex @@ -481,6 +481,11 @@ in the printed output of this document. \end{tabular} \end{table*} +Always use midrule to separate table header rows from data rows, and +use it only for this purpose. This enables assistive technologies to +recognise table headers and support their users in navigating tables +more easily. + \section{Math Equations} You may want to display math equations in three distinct styles: inline, numbered or non-numbered display. Each of the three are @@ -538,16 +543,33 @@ in the example below. \caption{1907 Franklin Model D roadster. Photograph by Harris \& Ewing, Inc. [Public domain], via Wikimedia Commons. (\url{https://goo.gl/VLCRBB}).} - \Description{The 1907 Franklin Model D roadster.} + \Description{A woman and a girl in white dresses sit in an open car.} \end{figure} Your figures should contain a caption which describes the figure to -the reader. Figure captions go below the figure. Your figures should -{\bfseries also} include a description suitable for screen readers, to -assist the visually-challenged to better understand your work. +the reader. Figure captions are placed {\itshape below} the figure. +Every figure should also have a figure description unless it is purely +decorative. These descriptions convey what’s in the image to someone +who cannot see it. They are also used by search engine crawlers for +indexing images, and when images cannot be loaded. + +A figure description must be unformatted plain text less than 2000 +characters long (including spaces). {\bfseries Figure descriptions + should not repeat the figure caption – their purpose is to capture + important information that is not already provided in the caption or + the main text of the paper.} For figures that convey important and +complex new information, a short text description may not be +adequate. More complex alternative descriptions can be placed in an +appendix and referenced in a short figure description. For example, +provide a data table capturing the information in a bar chart, or a +structured list representing a graph. For additional information +regarding how best to write figure descriptions and why doing this is +so important, please see +\url{https://www.acm.org/publications/taps/describing-figures/}. + \subsection{The ``Teaser Figure''} A ``teaser figure'' is an image, or set of images in one figure, that @@ -600,17 +622,17 @@ command in the {\bfseries preamble} (before the command Editor00a's series should NOT be present since it has no vol. no.), a chapter in a divisible book \cite{Spector90}, a chapter in a divisible book in a series \cite{Douglass98}, a multi-volume work as - book \cite{Knuth97}, an article in a proceedings (of a conference, - symposium, workshop for example) (paginated proceedings article) - \cite{Andler79}, a proceedings article with all possible elements - \cite{Smith10}, an example of an enumerated proceedings article - \cite{VanGundy07}, an informally published work \cite{Harel78}, - a couple of preprints \cite{Bornmann2019, AnzarootPBM14}, - a doctoral dissertation \cite{Clarkson85}, a master's thesis: - \cite{anisi03}, an online document / world wide web resource - \cite{Thornburg01, Ablamowicz07, Poker06}, a video game (Case 1) - \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} and - (Case 3) a patent \cite{JoeScientist001}, work accepted for + book \cite{Knuth97}, a couple of articles in a proceedings (of a + conference, symposium, workshop for example) (paginated proceedings + article) \cite{Andler79, Hagerup1993}, a proceedings article with + all possible elements \cite{Smith10}, an example of an enumerated + proceedings article \cite{VanGundy07}, an informally published work + \cite{Harel78}, a couple of preprints \cite{Bornmann2019, + AnzarootPBM14}, a doctoral dissertation \cite{Clarkson85}, a + master's thesis: \cite{anisi03}, an online document / world wide web + resource \cite{Thornburg01, Ablamowicz07, Poker06}, a video game + (Case 1) \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} + and (Case 3) a patent \cite{JoeScientist001}, work accepted for publication \cite{rous08}, 'YYYYb'-test for prolific author \cite{SaeediMEJ10} and \cite{SaeediJETC10}. Other cites might contain 'duplicate' DOI and URLs (some SIAM articles) diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-acmsmall-conf.pdf b/Master/texmf-dist/doc/latex/acmart/samples/sample-acmsmall-conf.pdf Binary files differindex 3f90e052beb..990a35ad190 100644 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-acmsmall-conf.pdf +++ b/Master/texmf-dist/doc/latex/acmart/samples/sample-acmsmall-conf.pdf diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-acmsmall-conf.tex b/Master/texmf-dist/doc/latex/acmart/samples/sample-acmsmall-conf.tex index 803231a7387..430558dca66 100644 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-acmsmall-conf.tex +++ b/Master/texmf-dist/doc/latex/acmart/samples/sample-acmsmall-conf.tex @@ -491,6 +491,11 @@ in the printed output of this document. \end{tabular} \end{table*} +Always use midrule to separate table header rows from data rows, and +use it only for this purpose. This enables assistive technologies to +recognise table headers and support their users in navigating tables +more easily. + \section{Math Equations} You may want to display math equations in three distinct styles: inline, numbered or non-numbered display. Each of the three are @@ -548,16 +553,33 @@ in the example below. \caption{1907 Franklin Model D roadster. Photograph by Harris \& Ewing, Inc. [Public domain], via Wikimedia Commons. (\url{https://goo.gl/VLCRBB}).} - \Description{The 1907 Franklin Model D roadster.} + \Description{A woman and a girl in white dresses sit in an open car.} \end{figure} Your figures should contain a caption which describes the figure to -the reader. Figure captions go below the figure. Your figures should -{\bfseries also} include a description suitable for screen readers, to -assist the visually-challenged to better understand your work. +the reader. Figure captions are placed {\itshape below} the figure. +Every figure should also have a figure description unless it is purely +decorative. These descriptions convey what’s in the image to someone +who cannot see it. They are also used by search engine crawlers for +indexing images, and when images cannot be loaded. + +A figure description must be unformatted plain text less than 2000 +characters long (including spaces). {\bfseries Figure descriptions + should not repeat the figure caption – their purpose is to capture + important information that is not already provided in the caption or + the main text of the paper.} For figures that convey important and +complex new information, a short text description may not be +adequate. More complex alternative descriptions can be placed in an +appendix and referenced in a short figure description. For example, +provide a data table capturing the information in a bar chart, or a +structured list representing a graph. For additional information +regarding how best to write figure descriptions and why doing this is +so important, please see +\url{https://www.acm.org/publications/taps/describing-figures/}. + \subsection{The ``Teaser Figure''} A ``teaser figure'' is an image, or set of images in one figure, that @@ -610,17 +632,17 @@ command in the {\bfseries preamble} (before the command Editor00a's series should NOT be present since it has no vol. no.), a chapter in a divisible book \cite{Spector90}, a chapter in a divisible book in a series \cite{Douglass98}, a multi-volume work as - book \cite{Knuth97}, an article in a proceedings (of a conference, - symposium, workshop for example) (paginated proceedings article) - \cite{Andler79}, a proceedings article with all possible elements - \cite{Smith10}, an example of an enumerated proceedings article - \cite{VanGundy07}, an informally published work \cite{Harel78}, - a couple of preprints \cite{Bornmann2019, AnzarootPBM14}, - a doctoral dissertation \cite{Clarkson85}, a master's thesis: - \cite{anisi03}, an online document / world wide web resource - \cite{Thornburg01, Ablamowicz07, Poker06}, a video game (Case 1) - \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} and - (Case 3) a patent \cite{JoeScientist001}, work accepted for + book \cite{Knuth97}, a couple of articles in a proceedings (of a + conference, symposium, workshop for example) (paginated proceedings + article) \cite{Andler79, Hagerup1993}, a proceedings article with + all possible elements \cite{Smith10}, an example of an enumerated + proceedings article \cite{VanGundy07}, an informally published work + \cite{Harel78}, a couple of preprints \cite{Bornmann2019, + AnzarootPBM14}, a doctoral dissertation \cite{Clarkson85}, a + master's thesis: \cite{anisi03}, an online document / world wide web + resource \cite{Thornburg01, Ablamowicz07, Poker06}, a video game + (Case 1) \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} + and (Case 3) a patent \cite{JoeScientist001}, work accepted for publication \cite{rous08}, 'YYYYb'-test for prolific author \cite{SaeediMEJ10} and \cite{SaeediJETC10}. Other cites might contain 'duplicate' DOI and URLs (some SIAM articles) diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-acmsmall.pdf b/Master/texmf-dist/doc/latex/acmart/samples/sample-acmsmall.pdf Binary files differindex 57bd85df9f4..a60476aa63b 100644 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-acmsmall.pdf +++ b/Master/texmf-dist/doc/latex/acmart/samples/sample-acmsmall.pdf diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-acmsmall.tex b/Master/texmf-dist/doc/latex/acmart/samples/sample-acmsmall.tex index 4c0683a119b..dc863ba1aa5 100644 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-acmsmall.tex +++ b/Master/texmf-dist/doc/latex/acmart/samples/sample-acmsmall.tex @@ -481,6 +481,11 @@ in the printed output of this document. \end{tabular} \end{table*} +Always use midrule to separate table header rows from data rows, and +use it only for this purpose. This enables assistive technologies to +recognise table headers and support their users in navigating tables +more easily. + \section{Math Equations} You may want to display math equations in three distinct styles: inline, numbered or non-numbered display. Each of the three are @@ -538,16 +543,33 @@ in the example below. \caption{1907 Franklin Model D roadster. Photograph by Harris \& Ewing, Inc. [Public domain], via Wikimedia Commons. (\url{https://goo.gl/VLCRBB}).} - \Description{The 1907 Franklin Model D roadster.} + \Description{A woman and a girl in white dresses sit in an open car.} \end{figure} Your figures should contain a caption which describes the figure to -the reader. Figure captions go below the figure. Your figures should -{\bfseries also} include a description suitable for screen readers, to -assist the visually-challenged to better understand your work. +the reader. Figure captions are placed {\itshape below} the figure. +Every figure should also have a figure description unless it is purely +decorative. These descriptions convey what’s in the image to someone +who cannot see it. They are also used by search engine crawlers for +indexing images, and when images cannot be loaded. + +A figure description must be unformatted plain text less than 2000 +characters long (including spaces). {\bfseries Figure descriptions + should not repeat the figure caption – their purpose is to capture + important information that is not already provided in the caption or + the main text of the paper.} For figures that convey important and +complex new information, a short text description may not be +adequate. More complex alternative descriptions can be placed in an +appendix and referenced in a short figure description. For example, +provide a data table capturing the information in a bar chart, or a +structured list representing a graph. For additional information +regarding how best to write figure descriptions and why doing this is +so important, please see +\url{https://www.acm.org/publications/taps/describing-figures/}. + \subsection{The ``Teaser Figure''} A ``teaser figure'' is an image, or set of images in one figure, that @@ -600,17 +622,17 @@ command in the {\bfseries preamble} (before the command Editor00a's series should NOT be present since it has no vol. no.), a chapter in a divisible book \cite{Spector90}, a chapter in a divisible book in a series \cite{Douglass98}, a multi-volume work as - book \cite{Knuth97}, an article in a proceedings (of a conference, - symposium, workshop for example) (paginated proceedings article) - \cite{Andler79}, a proceedings article with all possible elements - \cite{Smith10}, an example of an enumerated proceedings article - \cite{VanGundy07}, an informally published work \cite{Harel78}, - a couple of preprints \cite{Bornmann2019, AnzarootPBM14}, - a doctoral dissertation \cite{Clarkson85}, a master's thesis: - \cite{anisi03}, an online document / world wide web resource - \cite{Thornburg01, Ablamowicz07, Poker06}, a video game (Case 1) - \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} and - (Case 3) a patent \cite{JoeScientist001}, work accepted for + book \cite{Knuth97}, a couple of articles in a proceedings (of a + conference, symposium, workshop for example) (paginated proceedings + article) \cite{Andler79, Hagerup1993}, a proceedings article with + all possible elements \cite{Smith10}, an example of an enumerated + proceedings article \cite{VanGundy07}, an informally published work + \cite{Harel78}, a couple of preprints \cite{Bornmann2019, + AnzarootPBM14}, a doctoral dissertation \cite{Clarkson85}, a + master's thesis: \cite{anisi03}, an online document / world wide web + resource \cite{Thornburg01, Ablamowicz07, Poker06}, a video game + (Case 1) \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} + and (Case 3) a patent \cite{JoeScientist001}, work accepted for publication \cite{rous08}, 'YYYYb'-test for prolific author \cite{SaeediMEJ10} and \cite{SaeediJETC10}. Other cites might contain 'duplicate' DOI and URLs (some SIAM articles) diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-acmtog.pdf b/Master/texmf-dist/doc/latex/acmart/samples/sample-acmtog.pdf Binary files differindex 361822c0ff3..e082644d0fb 100644 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-acmtog.pdf +++ b/Master/texmf-dist/doc/latex/acmart/samples/sample-acmtog.pdf diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-acmtog.tex b/Master/texmf-dist/doc/latex/acmart/samples/sample-acmtog.tex index 6c727582b65..7e44ccb8112 100644 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-acmtog.tex +++ b/Master/texmf-dist/doc/latex/acmart/samples/sample-acmtog.tex @@ -479,6 +479,11 @@ in the printed output of this document. \end{tabular} \end{table*} +Always use midrule to separate table header rows from data rows, and +use it only for this purpose. This enables assistive technologies to +recognise table headers and support their users in navigating tables +more easily. + \section{Math Equations} You may want to display math equations in three distinct styles: inline, numbered or non-numbered display. Each of the three are @@ -536,16 +541,33 @@ in the example below. \caption{1907 Franklin Model D roadster. Photograph by Harris \& Ewing, Inc. [Public domain], via Wikimedia Commons. (\url{https://goo.gl/VLCRBB}).} - \Description{The 1907 Franklin Model D roadster.} + \Description{A woman and a girl in white dresses sit in an open car.} \end{figure} Your figures should contain a caption which describes the figure to -the reader. Figure captions go below the figure. Your figures should -{\bfseries also} include a description suitable for screen readers, to -assist the visually-challenged to better understand your work. +the reader. Figure captions are placed {\itshape below} the figure. +Every figure should also have a figure description unless it is purely +decorative. These descriptions convey what’s in the image to someone +who cannot see it. They are also used by search engine crawlers for +indexing images, and when images cannot be loaded. + +A figure description must be unformatted plain text less than 2000 +characters long (including spaces). {\bfseries Figure descriptions + should not repeat the figure caption – their purpose is to capture + important information that is not already provided in the caption or + the main text of the paper.} For figures that convey important and +complex new information, a short text description may not be +adequate. More complex alternative descriptions can be placed in an +appendix and referenced in a short figure description. For example, +provide a data table capturing the information in a bar chart, or a +structured list representing a graph. For additional information +regarding how best to write figure descriptions and why doing this is +so important, please see +\url{https://www.acm.org/publications/taps/describing-figures/}. + \subsection{The ``Teaser Figure''} A ``teaser figure'' is an image, or set of images in one figure, that @@ -598,17 +620,17 @@ command in the {\bfseries preamble} (before the command Editor00a's series should NOT be present since it has no vol. no.), a chapter in a divisible book \cite{Spector90}, a chapter in a divisible book in a series \cite{Douglass98}, a multi-volume work as - book \cite{Knuth97}, an article in a proceedings (of a conference, - symposium, workshop for example) (paginated proceedings article) - \cite{Andler79}, a proceedings article with all possible elements - \cite{Smith10}, an example of an enumerated proceedings article - \cite{VanGundy07}, an informally published work \cite{Harel78}, - a couple of preprints \cite{Bornmann2019, AnzarootPBM14}, - a doctoral dissertation \cite{Clarkson85}, a master's thesis: - \cite{anisi03}, an online document / world wide web resource - \cite{Thornburg01, Ablamowicz07, Poker06}, a video game (Case 1) - \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} and - (Case 3) a patent \cite{JoeScientist001}, work accepted for + book \cite{Knuth97}, a couple of articles in a proceedings (of a + conference, symposium, workshop for example) (paginated proceedings + article) \cite{Andler79, Hagerup1993}, a proceedings article with + all possible elements \cite{Smith10}, an example of an enumerated + proceedings article \cite{VanGundy07}, an informally published work + \cite{Harel78}, a couple of preprints \cite{Bornmann2019, + AnzarootPBM14}, a doctoral dissertation \cite{Clarkson85}, a + master's thesis: \cite{anisi03}, an online document / world wide web + resource \cite{Thornburg01, Ablamowicz07, Poker06}, a video game + (Case 1) \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} + and (Case 3) a patent \cite{JoeScientist001}, work accepted for publication \cite{rous08}, 'YYYYb'-test for prolific author \cite{SaeediMEJ10} and \cite{SaeediJETC10}. Other cites might contain 'duplicate' DOI and URLs (some SIAM articles) diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-authordraft.pdf b/Master/texmf-dist/doc/latex/acmart/samples/sample-authordraft.pdf Binary files differindex 4e1c8b52ba0..237c7cd7b27 100644 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-authordraft.pdf +++ b/Master/texmf-dist/doc/latex/acmart/samples/sample-authordraft.pdf diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-authordraft.tex b/Master/texmf-dist/doc/latex/acmart/samples/sample-authordraft.tex index 64a724965a5..f32624b8103 100644 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-authordraft.tex +++ b/Master/texmf-dist/doc/latex/acmart/samples/sample-authordraft.tex @@ -491,6 +491,11 @@ in the printed output of this document. \end{tabular} \end{table*} +Always use midrule to separate table header rows from data rows, and +use it only for this purpose. This enables assistive technologies to +recognise table headers and support their users in navigating tables +more easily. + \section{Math Equations} You may want to display math equations in three distinct styles: inline, numbered or non-numbered display. Each of the three are @@ -548,16 +553,33 @@ in the example below. \caption{1907 Franklin Model D roadster. Photograph by Harris \& Ewing, Inc. [Public domain], via Wikimedia Commons. (\url{https://goo.gl/VLCRBB}).} - \Description{The 1907 Franklin Model D roadster.} + \Description{A woman and a girl in white dresses sit in an open car.} \end{figure} Your figures should contain a caption which describes the figure to -the reader. Figure captions go below the figure. Your figures should -{\bfseries also} include a description suitable for screen readers, to -assist the visually-challenged to better understand your work. +the reader. Figure captions are placed {\itshape below} the figure. +Every figure should also have a figure description unless it is purely +decorative. These descriptions convey what’s in the image to someone +who cannot see it. They are also used by search engine crawlers for +indexing images, and when images cannot be loaded. + +A figure description must be unformatted plain text less than 2000 +characters long (including spaces). {\bfseries Figure descriptions + should not repeat the figure caption – their purpose is to capture + important information that is not already provided in the caption or + the main text of the paper.} For figures that convey important and +complex new information, a short text description may not be +adequate. More complex alternative descriptions can be placed in an +appendix and referenced in a short figure description. For example, +provide a data table capturing the information in a bar chart, or a +structured list representing a graph. For additional information +regarding how best to write figure descriptions and why doing this is +so important, please see +\url{https://www.acm.org/publications/taps/describing-figures/}. + \subsection{The ``Teaser Figure''} A ``teaser figure'' is an image, or set of images in one figure, that @@ -610,17 +632,17 @@ command in the {\bfseries preamble} (before the command Editor00a's series should NOT be present since it has no vol. no.), a chapter in a divisible book \cite{Spector90}, a chapter in a divisible book in a series \cite{Douglass98}, a multi-volume work as - book \cite{Knuth97}, an article in a proceedings (of a conference, - symposium, workshop for example) (paginated proceedings article) - \cite{Andler79}, a proceedings article with all possible elements - \cite{Smith10}, an example of an enumerated proceedings article - \cite{VanGundy07}, an informally published work \cite{Harel78}, - a couple of preprints \cite{Bornmann2019, AnzarootPBM14}, - a doctoral dissertation \cite{Clarkson85}, a master's thesis: - \cite{anisi03}, an online document / world wide web resource - \cite{Thornburg01, Ablamowicz07, Poker06}, a video game (Case 1) - \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} and - (Case 3) a patent \cite{JoeScientist001}, work accepted for + book \cite{Knuth97}, a couple of articles in a proceedings (of a + conference, symposium, workshop for example) (paginated proceedings + article) \cite{Andler79, Hagerup1993}, a proceedings article with + all possible elements \cite{Smith10}, an example of an enumerated + proceedings article \cite{VanGundy07}, an informally published work + \cite{Harel78}, a couple of preprints \cite{Bornmann2019, + AnzarootPBM14}, a doctoral dissertation \cite{Clarkson85}, a + master's thesis: \cite{anisi03}, an online document / world wide web + resource \cite{Thornburg01, Ablamowicz07, Poker06}, a video game + (Case 1) \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} + and (Case 3) a patent \cite{JoeScientist001}, work accepted for publication \cite{rous08}, 'YYYYb'-test for prolific author \cite{SaeediMEJ10} and \cite{SaeediJETC10}. Other cites might contain 'duplicate' DOI and URLs (some SIAM articles) diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-base.bib b/Master/texmf-dist/doc/latex/acmart/samples/sample-base.bib index 561e5e170ab..9b713fd687a 100644 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-base.bib +++ b/Master/texmf-dist/doc/latex/acmart/samples/sample-base.bib @@ -665,7 +665,7 @@ year = {2003}, note = "", } -@article{Rous08, +@article{rous08, author = "Bernard Rous", year = "2008", title = "The Enabling of Digital Libraries", @@ -874,7 +874,7 @@ year = {2003}, } % div book -@book{Mullender:1993:DS(:302430, +@book{Mullender:1993:DS:302430, editor = {Mullender, Sape}, title = {Distributed systems (2nd Ed.)}, year = {1993}, @@ -1434,7 +1434,7 @@ month = jul, year = 1984, pages = "380--401"} -@book{lamport:latex, +@book{Lamport:LaTeX, author = "Leslie Lamport", title = "\it {\LaTeX}: A Document Preparation System", publisher = "Addison-Wesley", @@ -1627,3 +1627,15 @@ archivePrefix = {arXiv}, archivePrefix = {arXiv}, eprint = {1403.1349}, } + +@inproceedings{Hagerup1993, +title = {Maintaining Discrete Probability Distributions Optimally}, +author = {Hagerup, Torben and Mehlhorn, Kurt and Munro, J. Ian}, +booktitle = {Proceedings of the 20th International Colloquium on Automata, Languages and Programming}, +series = {Lecture Notes in Computer Science}, +volume = {700}, +pages = {253--264}, +year = {1993}, +publisher = {Springer-Verlag}, +address = {Berlin}, +} diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-lualatex.pdf b/Master/texmf-dist/doc/latex/acmart/samples/sample-lualatex.pdf Binary files differnew file mode 100644 index 00000000000..8c840fa6b90 --- /dev/null +++ b/Master/texmf-dist/doc/latex/acmart/samples/sample-lualatex.pdf diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-sigchi.tex b/Master/texmf-dist/doc/latex/acmart/samples/sample-lualatex.tex index 388b4cee1e1..2e233e2fd99 100644 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-sigchi.tex +++ b/Master/texmf-dist/doc/latex/acmart/samples/sample-lualatex.tex @@ -1,17 +1,17 @@ %% -%% This is file `sample-sigchi.tex', +%% This is file `sample-lualatex.tex', %% generated with the docstrip utility. %% %% The original source files were: %% -%% samples.dtx (with options: `sigchi') +%% samples.dtx (with options: `sigconf') %% %% IMPORTANT NOTICE: %% %% For the copyright see the source file. %% %% Any modified versions of this file must be renamed -%% with new filenames distinct from sample-sigchi.tex. +%% with new filenames distinct from sample-lualatex.tex. %% %% For distribution of the original source see the terms %% for copying and modification in the file samples.dtx. @@ -22,7 +22,7 @@ %% in the same archive or directory.) %% %% The first command in your LaTeX source must be the \documentclass command. -\documentclass[sigchi]{acmart} +\documentclass[sigconf]{acmart} %% %% \BibTeX command to typeset BibTeX logo in the docs @@ -205,6 +205,16 @@ %% the work being presented. Separate the keywords with commas. \keywords{datasets, neural networks, gaze detection, text tagging} +%% A "teaser" image appears between the author and affiliation +%% information and the body of the document, and typically spans the +%% page. +\begin{teaserfigure} + \includegraphics[width=\textwidth]{sampleteaser} + \caption{Seattle Mariners at Spring Training, 2010.} + \Description{Enjoying the baseball game from the third-base + seats. Ichiro Suzuki preparing to bat.} + \label{fig:teaser} +\end{teaserfigure} %% %% This command processes the author and affiliation and title @@ -290,7 +300,7 @@ Frequently-used parameters, or combinations of parameters, include: This document uses the following string as the first command in the source file: \begin{verbatim} -\documentclass[sigchi]{acmart} +\documentclass[sigconf]{acmart} \end{verbatim} \section{Modifications} @@ -481,6 +491,11 @@ in the printed output of this document. \end{tabular} \end{table*} +Always use midrule to separate table header rows from data rows, and +use it only for this purpose. This enables assistive technologies to +recognise table headers and support their users in navigating tables +more easily. + \section{Math Equations} You may want to display math equations in three distinct styles: inline, numbered or non-numbered display. Each of the three are @@ -538,16 +553,33 @@ in the example below. \caption{1907 Franklin Model D roadster. Photograph by Harris \& Ewing, Inc. [Public domain], via Wikimedia Commons. (\url{https://goo.gl/VLCRBB}).} - \Description{The 1907 Franklin Model D roadster.} + \Description{A woman and a girl in white dresses sit in an open car.} \end{figure} Your figures should contain a caption which describes the figure to -the reader. Figure captions go below the figure. Your figures should -{\bfseries also} include a description suitable for screen readers, to -assist the visually-challenged to better understand your work. +the reader. Figure captions are placed {\itshape below} the figure. +Every figure should also have a figure description unless it is purely +decorative. These descriptions convey what’s in the image to someone +who cannot see it. They are also used by search engine crawlers for +indexing images, and when images cannot be loaded. + +A figure description must be unformatted plain text less than 2000 +characters long (including spaces). {\bfseries Figure descriptions + should not repeat the figure caption – their purpose is to capture + important information that is not already provided in the caption or + the main text of the paper.} For figures that convey important and +complex new information, a short text description may not be +adequate. More complex alternative descriptions can be placed in an +appendix and referenced in a short figure description. For example, +provide a data table capturing the information in a bar chart, or a +structured list representing a graph. For additional information +regarding how best to write figure descriptions and why doing this is +so important, please see +\url{https://www.acm.org/publications/taps/describing-figures/}. + \subsection{The ``Teaser Figure''} A ``teaser figure'' is an image, or set of images in one figure, that @@ -600,17 +632,17 @@ command in the {\bfseries preamble} (before the command Editor00a's series should NOT be present since it has no vol. no.), a chapter in a divisible book \cite{Spector90}, a chapter in a divisible book in a series \cite{Douglass98}, a multi-volume work as - book \cite{Knuth97}, an article in a proceedings (of a conference, - symposium, workshop for example) (paginated proceedings article) - \cite{Andler79}, a proceedings article with all possible elements - \cite{Smith10}, an example of an enumerated proceedings article - \cite{VanGundy07}, an informally published work \cite{Harel78}, - a couple of preprints \cite{Bornmann2019, AnzarootPBM14}, - a doctoral dissertation \cite{Clarkson85}, a master's thesis: - \cite{anisi03}, an online document / world wide web resource - \cite{Thornburg01, Ablamowicz07, Poker06}, a video game (Case 1) - \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} and - (Case 3) a patent \cite{JoeScientist001}, work accepted for + book \cite{Knuth97}, a couple of articles in a proceedings (of a + conference, symposium, workshop for example) (paginated proceedings + article) \cite{Andler79, Hagerup1993}, a proceedings article with + all possible elements \cite{Smith10}, an example of an enumerated + proceedings article \cite{VanGundy07}, an informally published work + \cite{Harel78}, a couple of preprints \cite{Bornmann2019, + AnzarootPBM14}, a doctoral dissertation \cite{Clarkson85}, a + master's thesis: \cite{anisi03}, an online document / world wide web + resource \cite{Thornburg01, Ablamowicz07, Poker06}, a video game + (Case 1) \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} + and (Case 3) a patent \cite{JoeScientist001}, work accepted for publication \cite{rous08}, 'YYYYb'-test for prolific author \cite{SaeediMEJ10} and \cite{SaeediJETC10}. Other cites might contain 'duplicate' DOI and URLs (some SIAM articles) @@ -720,4 +752,4 @@ massa et mattis lacinia. \end{document} \endinput %% -%% End of file `sample-sigchi.tex'. +%% End of file `sample-lualatex.tex'. diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-manuscript.pdf b/Master/texmf-dist/doc/latex/acmart/samples/sample-manuscript.pdf Binary files differindex 3c16480ab53..afb1134fa3d 100644 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-manuscript.pdf +++ b/Master/texmf-dist/doc/latex/acmart/samples/sample-manuscript.pdf diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-manuscript.tex b/Master/texmf-dist/doc/latex/acmart/samples/sample-manuscript.tex index 70d7e982b65..8d29ff3ea1e 100644 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-manuscript.tex +++ b/Master/texmf-dist/doc/latex/acmart/samples/sample-manuscript.tex @@ -481,6 +481,11 @@ in the printed output of this document. \end{tabular} \end{table*} +Always use midrule to separate table header rows from data rows, and +use it only for this purpose. This enables assistive technologies to +recognise table headers and support their users in navigating tables +more easily. + \section{Math Equations} You may want to display math equations in three distinct styles: inline, numbered or non-numbered display. Each of the three are @@ -538,16 +543,33 @@ in the example below. \caption{1907 Franklin Model D roadster. Photograph by Harris \& Ewing, Inc. [Public domain], via Wikimedia Commons. (\url{https://goo.gl/VLCRBB}).} - \Description{The 1907 Franklin Model D roadster.} + \Description{A woman and a girl in white dresses sit in an open car.} \end{figure} Your figures should contain a caption which describes the figure to -the reader. Figure captions go below the figure. Your figures should -{\bfseries also} include a description suitable for screen readers, to -assist the visually-challenged to better understand your work. +the reader. Figure captions are placed {\itshape below} the figure. +Every figure should also have a figure description unless it is purely +decorative. These descriptions convey what’s in the image to someone +who cannot see it. They are also used by search engine crawlers for +indexing images, and when images cannot be loaded. + +A figure description must be unformatted plain text less than 2000 +characters long (including spaces). {\bfseries Figure descriptions + should not repeat the figure caption – their purpose is to capture + important information that is not already provided in the caption or + the main text of the paper.} For figures that convey important and +complex new information, a short text description may not be +adequate. More complex alternative descriptions can be placed in an +appendix and referenced in a short figure description. For example, +provide a data table capturing the information in a bar chart, or a +structured list representing a graph. For additional information +regarding how best to write figure descriptions and why doing this is +so important, please see +\url{https://www.acm.org/publications/taps/describing-figures/}. + \subsection{The ``Teaser Figure''} A ``teaser figure'' is an image, or set of images in one figure, that @@ -600,17 +622,17 @@ command in the {\bfseries preamble} (before the command Editor00a's series should NOT be present since it has no vol. no.), a chapter in a divisible book \cite{Spector90}, a chapter in a divisible book in a series \cite{Douglass98}, a multi-volume work as - book \cite{Knuth97}, an article in a proceedings (of a conference, - symposium, workshop for example) (paginated proceedings article) - \cite{Andler79}, a proceedings article with all possible elements - \cite{Smith10}, an example of an enumerated proceedings article - \cite{VanGundy07}, an informally published work \cite{Harel78}, - a couple of preprints \cite{Bornmann2019, AnzarootPBM14}, - a doctoral dissertation \cite{Clarkson85}, a master's thesis: - \cite{anisi03}, an online document / world wide web resource - \cite{Thornburg01, Ablamowicz07, Poker06}, a video game (Case 1) - \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} and - (Case 3) a patent \cite{JoeScientist001}, work accepted for + book \cite{Knuth97}, a couple of articles in a proceedings (of a + conference, symposium, workshop for example) (paginated proceedings + article) \cite{Andler79, Hagerup1993}, a proceedings article with + all possible elements \cite{Smith10}, an example of an enumerated + proceedings article \cite{VanGundy07}, an informally published work + \cite{Harel78}, a couple of preprints \cite{Bornmann2019, + AnzarootPBM14}, a doctoral dissertation \cite{Clarkson85}, a + master's thesis: \cite{anisi03}, an online document / world wide web + resource \cite{Thornburg01, Ablamowicz07, Poker06}, a video game + (Case 1) \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} + and (Case 3) a patent \cite{JoeScientist001}, work accepted for publication \cite{rous08}, 'YYYYb'-test for prolific author \cite{SaeediMEJ10} and \cite{SaeediJETC10}. Other cites might contain 'duplicate' DOI and URLs (some SIAM articles) diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-sigchi-a.pdf b/Master/texmf-dist/doc/latex/acmart/samples/sample-sigchi-a.pdf Binary files differdeleted file mode 100644 index 7b8c796a50f..00000000000 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-sigchi-a.pdf +++ /dev/null diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-sigchi-a.tex b/Master/texmf-dist/doc/latex/acmart/samples/sample-sigchi-a.tex deleted file mode 100644 index 04cc67ddc33..00000000000 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-sigchi-a.tex +++ /dev/null @@ -1,723 +0,0 @@ -%% -%% This is file `sample-sigchi-a.tex', -%% generated with the docstrip utility. -%% -%% The original source files were: -%% -%% samples.dtx (with options: `sigchi-a') -%% -%% IMPORTANT NOTICE: -%% -%% For the copyright see the source file. -%% -%% Any modified versions of this file must be renamed -%% with new filenames distinct from sample-sigchi-a.tex. -%% -%% For distribution of the original source see the terms -%% for copying and modification in the file samples.dtx. -%% -%% This generated file may be distributed as long as the -%% original source files, as listed above, are part of the -%% same distribution. (The sources need not necessarily be -%% in the same archive or directory.) -%% -%% The first command in your LaTeX source must be the \documentclass command. -\documentclass[sigchi-a]{acmart} - -%% -%% \BibTeX command to typeset BibTeX logo in the docs -\AtBeginDocument{% - \providecommand\BibTeX{{% - \normalfont B\kern-0.5em{\scshape i\kern-0.25em b}\kern-0.8em\TeX}}} - -%% Rights management information. This information is sent to you -%% when you complete the rights form. These commands have SAMPLE -%% values in them; it is your responsibility as an author to replace -%% the commands and values with those provided to you when you -%% complete the rights form. -\setcopyright{acmcopyright} -\copyrightyear{2018} -\acmYear{2018} -\acmDOI{10.1145/1122445.1122456} - -%% These commands are for a PROCEEDINGS abstract or paper. -\acmConference[Woodstock '18]{Woodstock '18: ACM Symposium on Neural - Gaze Detection}{June 03--05, 2018}{Woodstock, NY} -\acmBooktitle{Woodstock '18: ACM Symposium on Neural Gaze Detection, - June 03--05, 2018, Woodstock, NY} -\acmPrice{15.00} -\acmISBN{978-1-4503-XXXX-X/18/06} - - -%% -%% Submission ID. -%% Use this when submitting an article to a sponsored event. You'll -%% receive a unique submission ID from the organizers -%% of the event, and this ID should be used as the parameter to this command. -%%\acmSubmissionID{123-A56-BU3} - -%% -%% The majority of ACM publications use numbered citations and -%% references. The command \citestyle{authoryear} switches to the -%% "author year" style. -%% -%% If you are preparing content for an event -%% sponsored by ACM SIGGRAPH, you must use the "author year" style of -%% citations and references. -%% Uncommenting -%% the next command will enable that style. -%%\citestyle{acmauthoryear} - -%% -%% end of the preamble, start of the body of the document source. -\begin{document} - -%% -%% The "title" command has an optional parameter, -%% allowing the author to define a "short title" to be used in page headers. -\title{The Name of the Title is Hope} - -%% -%% The "author" command and its associated commands are used to define -%% the authors and their affiliations. -%% Of note is the shared affiliation of the first two authors, and the -%% "authornote" and "authornotemark" commands -%% used to denote shared contribution to the research. -\author{Ben Trovato} -\authornote{Both authors contributed equally to this research.} -\email{trovato@corporation.com} -\orcid{1234-5678-9012} -\author{G.K.M. Tobin} -\authornotemark[1] -\email{webmaster@marysville-ohio.com} -\affiliation{% - \institution{Institute for Clarity in Documentation} - \streetaddress{P.O. Box 1212} - \city{Dublin} - \state{Ohio} - \postcode{43017-6221} -} - -\author{Lars Th{\o}rv{\"a}ld} -\affiliation{% - \institution{The Th{\o}rv{\"a}ld Group} - \streetaddress{1 Th{\o}rv{\"a}ld Circle} - \city{Hekla} - \country{Iceland}} -\email{larst@affiliation.org} - -\author{Valerie B\'eranger} -\affiliation{% - \institution{Inria Paris-Rocquencourt} - \city{Rocquencourt} - \country{France} -} - -\author{Aparna Patel} -\affiliation{% - \institution{Rajiv Gandhi University} - \streetaddress{Rono-Hills} - \city{Doimukh} - \state{Arunachal Pradesh} - \country{India}} - -\author{Huifen Chan} -\affiliation{% - \institution{Tsinghua University} - \streetaddress{30 Shuangqing Rd} - \city{Haidian Qu} - \state{Beijing Shi} - \country{China}} - -\author{Charles Palmer} -\affiliation{% - \institution{Palmer Research Laboratories} - \streetaddress{8600 Datapoint Drive} - \city{San Antonio} - \state{Texas} - \postcode{78229}} -\email{cpalmer@prl.com} - -\author{John Smith} -\affiliation{\institution{The Th{\o}rv{\"a}ld Group}} -\email{jsmith@affiliation.org} - -\author{Julius P. Kumquat} -\affiliation{\institution{The Kumquat Consortium}} -\email{jpkumquat@consortium.net} - -%% -%% By default, the full list of authors will be used in the page -%% headers. Often, this list is too long, and will overlap -%% other information printed in the page headers. This command allows -%% the author to define a more concise list -%% of authors' names for this purpose. -\renewcommand{\shortauthors}{Trovato and Tobin, et al.} - -%% -%% The abstract is a short summary of the work to be presented in the -%% article. -\begin{abstract} - A clear and well-documented \LaTeX\ document is presented as an - article formatted for publication by ACM in a conference proceedings - or journal publication. Based on the ``acmart'' document class, this - article presents and explains many of the common variations, as well - as many of the formatting elements an author may use in the - preparation of the documentation of their work. -\end{abstract} - -%% -%% The code below is generated by the tool at http://dl.acm.org/ccs.cfm. -%% Please copy and paste the code instead of the example below. -%% -\begin{CCSXML} -<ccs2012> - <concept> - <concept_id>10010520.10010553.10010562</concept_id> - <concept_desc>Computer systems organization~Embedded systems</concept_desc> - <concept_significance>500</concept_significance> - </concept> - <concept> - <concept_id>10010520.10010575.10010755</concept_id> - <concept_desc>Computer systems organization~Redundancy</concept_desc> - <concept_significance>300</concept_significance> - </concept> - <concept> - <concept_id>10010520.10010553.10010554</concept_id> - <concept_desc>Computer systems organization~Robotics</concept_desc> - <concept_significance>100</concept_significance> - </concept> - <concept> - <concept_id>10003033.10003083.10003095</concept_id> - <concept_desc>Networks~Network reliability</concept_desc> - <concept_significance>100</concept_significance> - </concept> -</ccs2012> -\end{CCSXML} - -\ccsdesc[500]{Computer systems organization~Embedded systems} -\ccsdesc[300]{Computer systems organization~Redundancy} -\ccsdesc{Computer systems organization~Robotics} -\ccsdesc[100]{Networks~Network reliability} - -%% -%% Keywords. The author(s) should pick words that accurately describe -%% the work being presented. Separate the keywords with commas. -\keywords{datasets, neural networks, gaze detection, text tagging} - - -%% -%% This command processes the author and affiliation and title -%% information and builds the first part of the formatted document. -\maketitle - -\section{Introduction} -ACM's consolidated article template, introduced in 2017, provides a -consistent \LaTeX\ style for use across ACM publications, and -incorporates accessibility and metadata-extraction functionality -necessary for future Digital Library endeavors. Numerous ACM and -SIG-specific \LaTeX\ templates have been examined, and their unique -features incorporated into this single new template. - -If you are new to publishing with ACM, this document is a valuable -guide to the process of preparing your work for publication. If you -have published with ACM before, this document provides insight and -instruction into more recent changes to the article template. - -The ``\verb|acmart|'' document class can be used to prepare articles -for any ACM publication --- conference or journal, and for any stage -of publication, from review to final ``camera-ready'' copy, to the -author's own version, with {\itshape very} few changes to the source. - -\section{Template Overview} -As noted in the introduction, the ``\verb|acmart|'' document class can -be used to prepare many different kinds of documentation --- a -double-blind initial submission of a full-length technical paper, a -two-page SIGGRAPH Emerging Technologies abstract, a ``camera-ready'' -journal article, a SIGCHI Extended Abstract, and more --- all by -selecting the appropriate {\itshape template style} and {\itshape - template parameters}. - -This document will explain the major features of the document -class. For further information, the {\itshape \LaTeX\ User's Guide} is -available from -\url{https://www.acm.org/publications/proceedings-template}. - -\subsection{Template Styles} - -The primary parameter given to the ``\verb|acmart|'' document class is -the {\itshape template style} which corresponds to the kind of publication -or SIG publishing the work. This parameter is enclosed in square -brackets and is a part of the {\verb|documentclass|} command: -\begin{verbatim} - \documentclass[STYLE]{acmart} -\end{verbatim} - -Journals use one of three template styles. All but three ACM journals -use the {\verb|acmsmall|} template style: -\begin{itemize} -\item {\verb|acmsmall|}: The default journal template style. -\item {\verb|acmlarge|}: Used by JOCCH and TAP. -\item {\verb|acmtog|}: Used by TOG. -\end{itemize} - -The majority of conference proceedings documentation will use the {\verb|acmconf|} template style. -\begin{itemize} -\item {\verb|acmconf|}: The default proceedings template style. -\item{\verb|sigchi|}: Used for SIGCHI conference articles. -\item{\verb|sigchi-a|}: Used for SIGCHI ``Extended Abstract'' articles. -\item{\verb|sigplan|}: Used for SIGPLAN conference articles. -\end{itemize} - -\subsection{Template Parameters} - -In addition to specifying the {\itshape template style} to be used in -formatting your work, there are a number of {\itshape template parameters} -which modify some part of the applied template style. A complete list -of these parameters can be found in the {\itshape \LaTeX\ User's Guide.} - -Frequently-used parameters, or combinations of parameters, include: -\begin{itemize} -\item {\verb|anonymous,review|}: Suitable for a ``double-blind'' - conference submission. Anonymizes the work and includes line - numbers. Use with the \verb|\acmSubmissionID| command to print the - submission's unique ID on each page of the work. -\item{\verb|authorversion|}: Produces a version of the work suitable - for posting by the author. -\item{\verb|screen|}: Produces colored hyperlinks. -\end{itemize} - -This document uses the following string as the first command in the -source file: -\begin{verbatim} -\documentclass[sigchi-a]{acmart} -\end{verbatim} - -\section{Modifications} - -Modifying the template --- including but not limited to: adjusting -margins, typeface sizes, line spacing, paragraph and list definitions, -and the use of the \verb|\vspace| command to manually adjust the -vertical spacing between elements of your work --- is not allowed. - -{\bfseries Your document will be returned to you for revision if - modifications are discovered.} - -\section{Typefaces} - -The ``\verb|acmart|'' document class requires the use of the -``Libertine'' typeface family. Your \TeX\ installation should include -this set of packages. Please do not substitute other typefaces. The -``\verb|lmodern|'' and ``\verb|ltimes|'' packages should not be used, -as they will override the built-in typeface families. - -\section{Title Information} - -The title of your work should use capital letters appropriately - -\url{https://capitalizemytitle.com/} has useful rules for -capitalization. Use the {\verb|title|} command to define the title of -your work. If your work has a subtitle, define it with the -{\verb|subtitle|} command. Do not insert line breaks in your title. - -If your title is lengthy, you must define a short version to be used -in the page headers, to prevent overlapping text. The \verb|title| -command has a ``short title'' parameter: -\begin{verbatim} - \title[short title]{full title} -\end{verbatim} - -\section{Authors and Affiliations} - -Each author must be defined separately for accurate metadata -identification. Multiple authors may share one affiliation. Authors' -names should not be abbreviated; use full first names wherever -possible. Include authors' e-mail addresses whenever possible. - -Grouping authors' names or e-mail addresses, or providing an ``e-mail -alias,'' as shown below, is not acceptable: -\begin{verbatim} - \author{Brooke Aster, David Mehldau} - \email{dave,judy,steve@university.edu} - \email{firstname.lastname@phillips.org} -\end{verbatim} - -The \verb|authornote| and \verb|authornotemark| commands allow a note -to apply to multiple authors --- for example, if the first two authors -of an article contributed equally to the work. - -If your author list is lengthy, you must define a shortened version of -the list of authors to be used in the page headers, to prevent -overlapping text. The following command should be placed just after -the last \verb|\author{}| definition: -\begin{verbatim} - \renewcommand{\shortauthors}{McCartney, et al.} -\end{verbatim} -Omitting this command will force the use of a concatenated list of all -of the authors' names, which may result in overlapping text in the -page headers. - -The article template's documentation, available at -\url{https://www.acm.org/publications/proceedings-template}, has a -complete explanation of these commands and tips for their effective -use. - -Note that authors' addresses are mandatory for journal articles. - -\section{Rights Information} - -Authors of any work published by ACM will need to complete a rights -form. Depending on the kind of work, and the rights management choice -made by the author, this may be copyright transfer, permission, -license, or an OA (open access) agreement. - -Regardless of the rights management choice, the author will receive a -copy of the completed rights form once it has been submitted. This -form contains \LaTeX\ commands that must be copied into the source -document. When the document source is compiled, these commands and -their parameters add formatted text to several areas of the final -document: -\begin{itemize} -\item the ``ACM Reference Format'' text on the first page. -\item the ``rights management'' text on the first page. -\item the conference information in the page header(s). -\end{itemize} - -Rights information is unique to the work; if you are preparing several -works for an event, make sure to use the correct set of commands with -each of the works. - -The ACM Reference Format text is required for all articles over one -page in length, and is optional for one-page articles (abstracts). - -\section{CCS Concepts and User-Defined Keywords} - -Two elements of the ``acmart'' document class provide powerful -taxonomic tools for you to help readers find your work in an online -search. - -The ACM Computing Classification System --- -\url{https://www.acm.org/publications/class-2012} --- is a set of -classifiers and concepts that describe the computing -discipline. Authors can select entries from this classification -system, via \url{https://dl.acm.org/ccs/ccs.cfm}, and generate the -commands to be included in the \LaTeX\ source. - -User-defined keywords are a comma-separated list of words and phrases -of the authors' choosing, providing a more flexible way of describing -the research being presented. - -CCS concepts and user-defined keywords are required for for all -articles over two pages in length, and are optional for one- and -two-page articles (or abstracts). - -\section{Sectioning Commands} - -Your work should use standard \LaTeX\ sectioning commands: -\verb|section|, \verb|subsection|, \verb|subsubsection|, and -\verb|paragraph|. They should be numbered; do not remove the numbering -from the commands. - -Simulating a sectioning command by setting the first word or words of -a paragraph in boldface or italicized text is {\bfseries not allowed.} - -\section{Tables} - -The ``\verb|acmart|'' document class includes the ``\verb|booktabs|'' -package --- \url{https://ctan.org/pkg/booktabs} --- for preparing -high-quality tables. - -Table captions are placed {\itshape above} the table. - -Because tables cannot be split across pages, the best placement for -them is typically the top of the page nearest their initial cite. To -ensure this proper ``floating'' placement of tables, use the -environment \textbf{table} to enclose the table's contents and the -table caption. The contents of the table itself must go in the -\textbf{tabular} environment, to be aligned properly in rows and -columns, with the desired horizontal and vertical rules. Again, -detailed instructions on \textbf{tabular} material are found in the -\textit{\LaTeX\ User's Guide}. - -Immediately following this sentence is the point at which -Table~\ref{tab:freq} is included in the input file; compare the -placement of the table here with the table in the printed output of -this document. - -\begin{margintable} - \caption{Frequency of Special Characters} - \label{tab:freq} - \begin{tabular}{ccl} - \toprule - Non-English or Math&Frequency&Comments\\ - \midrule - \O & 1 in 1,000& For Swedish names\\ - $\pi$ & 1 in 5& Common in math\\ - \$ & 4 in 5 & Used in business\\ - $\Psi^2_1$ & 1 in 40,000& Unexplained usage\\ - \bottomrule -\end{tabular} -\end{margintable} - -To set a wider table, which takes up the whole width of the page's -live area, use the environment \textbf{table*} to enclose the table's -contents and the table caption. As with a single-column table, this -wide table will ``float'' to a location deemed more -desirable. Immediately following this sentence is the point at which -Table~\ref{tab:commands} is included in the input file; again, it is -instructive to compare the placement of the table here with the table -in the printed output of this document. - -\begin{table*} - \caption{Some Typical Commands} - \label{tab:commands} - \begin{tabular}{ccl} - \toprule - Command &A Number & Comments\\ - \midrule - \texttt{{\char'134}author} & 100& Author \\ - \texttt{{\char'134}table}& 300 & For tables\\ - \texttt{{\char'134}table*}& 400& For wider tables\\ - \bottomrule - \end{tabular} -\end{table*} - -\section{Math Equations} -You may want to display math equations in three distinct styles: -inline, numbered or non-numbered display. Each of the three are -discussed in the next sections. - -\subsection{Inline (In-text) Equations} -A formula that appears in the running text is called an inline or -in-text formula. It is produced by the \textbf{math} environment, -which can be invoked with the usual -\texttt{{\char'134}begin\,\ldots{\char'134}end} construction or with -the short form \texttt{\$\,\ldots\$}. You can use any of the symbols -and structures, from $\alpha$ to $\omega$, available in -\LaTeX~\cite{Lamport:LaTeX}; this section will simply show a few -examples of in-text equations in context. Notice how this equation: -\begin{math} - \lim_{n\rightarrow \infty}x=0 -\end{math}, -set here in in-line math style, looks slightly different when -set in display style. (See next section). - -\subsection{Display Equations} -A numbered display equation---one set off by vertical space from the -text and centered horizontally---is produced by the \textbf{equation} -environment. An unnumbered display equation is produced by the -\textbf{displaymath} environment. - -Again, in either environment, you can use any of the symbols and -structures available in \LaTeX\@; this section will just give a couple -of examples of display equations in context. First, consider the -equation, shown as an inline equation above: -\begin{equation} - \lim_{n\rightarrow \infty}x=0 -\end{equation} -Notice how it is formatted somewhat differently in -the \textbf{displaymath} -environment. Now, we'll enter an unnumbered equation: -\begin{displaymath} - \sum_{i=0}^{\infty} x + 1 -\end{displaymath} -and follow it with another numbered equation: -\begin{equation} - \sum_{i=0}^{\infty}x_i=\int_{0}^{\pi+2} f -\end{equation} -just to demonstrate \LaTeX's able handling of numbering. - -\section{Figures} - -The ``\verb|figure|'' environment should be used for figures. One or -more images can be placed within a figure. If your figure contains -third-party material, you must clearly identify it as such, as shown -in the example below. -\begin{marginfigure} - \centering - \includegraphics[width=\linewidth]{sample-franklin} - \caption{1907 Franklin Model D roadster. Photograph by Harris \& - Ewing, Inc. [Public domain], via Wikimedia - Commons. (\url{https://goo.gl/VLCRBB}).} - \Description{The 1907 Franklin Model D roadster.} -\end{marginfigure} - -Your figures should contain a caption which describes the figure to -the reader. Figure captions go below the figure. Your figures should -{\bfseries also} include a description suitable for screen readers, to -assist the visually-challenged to better understand your work. - -Figure captions are placed {\itshape below} the figure. - -\subsection{The ``Teaser Figure''} - -A ``teaser figure'' is an image, or set of images in one figure, that -are placed after all author and affiliation information, and before -the body of the article, spanning the page. If you wish to have such a -figure in your article, place the command immediately before the -\verb|\maketitle| command: -\begin{verbatim} - \begin{teaserfigure} - \includegraphics[width=\textwidth]{sampleteaser} - \caption{figure caption} - \Description{figure description} - \end{teaserfigure} -\end{verbatim} - -\section{Citations and Bibliographies} - -The use of \BibTeX\ for the preparation and formatting of one's -references is strongly recommended. Authors' names should be complete ---- use full first names (``Donald E. Knuth'') not initials -(``D. E. Knuth'') --- and the salient identifying features of a -reference should be included: title, year, volume, number, pages, -article DOI, etc. - -The bibliography is included in your source document with these two -commands, placed just before the \verb|\end{document}| command: -\begin{verbatim} - \bibliographystyle{ACM-Reference-Format} - \bibliography{bibfile} -\end{verbatim} -where ``\verb|bibfile|'' is the name, without the ``\verb|.bib|'' -suffix, of the \BibTeX\ file. - -Citations and references are numbered by default. A small number of -ACM publications have citations and references formatted in the -``author year'' style; for these exceptions, please include this -command in the {\bfseries preamble} (before the command -``\verb|\begin{document}|'') of your \LaTeX\ source: -\begin{verbatim} - \citestyle{acmauthoryear} -\end{verbatim} - - Some examples. A paginated journal article \cite{Abril07}, an - enumerated journal article \cite{Cohen07}, a reference to an entire - issue \cite{JCohen96}, a monograph (whole book) \cite{Kosiur01}, a - monograph/whole book in a series (see 2a in spec. document) - \cite{Harel79}, a divisible-book such as an anthology or compilation - \cite{Editor00} followed by the same example, however we only output - the series if the volume number is given \cite{Editor00a} (so - Editor00a's series should NOT be present since it has no vol. no.), - a chapter in a divisible book \cite{Spector90}, a chapter in a - divisible book in a series \cite{Douglass98}, a multi-volume work as - book \cite{Knuth97}, an article in a proceedings (of a conference, - symposium, workshop for example) (paginated proceedings article) - \cite{Andler79}, a proceedings article with all possible elements - \cite{Smith10}, an example of an enumerated proceedings article - \cite{VanGundy07}, an informally published work \cite{Harel78}, - a couple of preprints \cite{Bornmann2019, AnzarootPBM14}, - a doctoral dissertation \cite{Clarkson85}, a master's thesis: - \cite{anisi03}, an online document / world wide web resource - \cite{Thornburg01, Ablamowicz07, Poker06}, a video game (Case 1) - \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} and - (Case 3) a patent \cite{JoeScientist001}, work accepted for - publication \cite{rous08}, 'YYYYb'-test for prolific author - \cite{SaeediMEJ10} and \cite{SaeediJETC10}. Other cites might - contain 'duplicate' DOI and URLs (some SIAM articles) - \cite{Kirschmer:2010:AEI:1958016.1958018}. Boris / Barbara Beeton: - multi-volume works as books \cite{MR781536} and \cite{MR781537}. A - couple of citations with DOIs: - \cite{2004:ITE:1009386.1010128,Kirschmer:2010:AEI:1958016.1958018}. Online - citations: \cite{TUGInstmem, Thornburg01, CTANacmart}. Artifacts: - \cite{R} and \cite{UMassCitations}. - -\section{Acknowledgments} - -Identification of funding sources and other support, and thanks to -individuals and groups that assisted in the research and the -preparation of the work should be included in an acknowledgment -section, which is placed just before the reference section in your -document. - -This section has a special environment: -\begin{verbatim} - \begin{acks} - ... - \end{acks} -\end{verbatim} -so that the information contained therein can be more easily collected -during the article metadata extraction phase, and to ensure -consistency in the spelling of the section heading. - -Authors should not prepare this section as a numbered or unnumbered {\verb|\section|}; please use the ``{\verb|acks|}'' environment. - -\section{Appendices} - -If your work needs an appendix, add it before the -``\verb|\end{document}|'' command at the conclusion of your source -document. - -Start the appendix with the ``\verb|appendix|'' command: -\begin{verbatim} - \appendix -\end{verbatim} -and note that in the appendix, sections are lettered, not -numbered. This document has two appendices, demonstrating the section -and subsection identification method. - -\section{SIGCHI Extended Abstracts} - -The ``\verb|sigchi-a|'' template style (available only in \LaTeX\ and -not in Word) produces a landscape-orientation formatted article, with -a wide left margin. Three environments are available for use with the -``\verb|sigchi-a|'' template style, and produce formatted output in -the margin: -\begin{itemize} -\item {\verb|sidebar|}: Place formatted text in the margin. -\item {\verb|marginfigure|}: Place a figure in the margin. -\item {\verb|margintable|}: Place a table in the margin. -\end{itemize} - -%% -%% The acknowledgments section is defined using the "acks" environment -%% (and NOT an unnumbered section). This ensures the proper -%% identification of the section in the article metadata, and the -%% consistent spelling of the heading. -\begin{acks} -To Robert, for the bagels and explaining CMYK and color spaces. -\end{acks} - -%% -%% The next two lines define the bibliography style to be used, and -%% the bibliography file. -\bibliographystyle{ACM-Reference-Format} -\bibliography{sample-base} - -%% -%% If your work has an appendix, this is the place to put it. -\appendix - -\section{Research Methods} - -\subsection{Part One} - -Lorem ipsum dolor sit amet, consectetur adipiscing elit. Morbi -malesuada, quam in pulvinar varius, metus nunc fermentum urna, id -sollicitudin purus odio sit amet enim. Aliquam ullamcorper eu ipsum -vel mollis. Curabitur quis dictum nisl. Phasellus vel semper risus, et -lacinia dolor. Integer ultricies commodo sem nec semper. - -\subsection{Part Two} - -Etiam commodo feugiat nisl pulvinar pellentesque. Etiam auctor sodales -ligula, non varius nibh pulvinar semper. Suspendisse nec lectus non -ipsum convallis congue hendrerit vitae sapien. Donec at laoreet -eros. Vivamus non purus placerat, scelerisque diam eu, cursus -ante. Etiam aliquam tortor auctor efficitur mattis. - -\section{Online Resources} - -Nam id fermentum dui. Suspendisse sagittis tortor a nulla mollis, in -pulvinar ex pretium. Sed interdum orci quis metus euismod, et sagittis -enim maximus. Vestibulum gravida massa ut felis suscipit -congue. Quisque mattis elit a risus ultrices commodo venenatis eget -dui. Etiam sagittis eleifend elementum. - -Nam interdum magna at lectus dignissim, ac dignissim lorem -rhoncus. Maecenas eu arcu ac neque placerat aliquam. Nunc pulvinar -massa et mattis lacinia. - -\end{document} -\endinput -%% -%% End of file `sample-sigchi-a.tex'. diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-sigchi.pdf b/Master/texmf-dist/doc/latex/acmart/samples/sample-sigchi.pdf Binary files differdeleted file mode 100644 index 18cd73a8cb8..00000000000 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-sigchi.pdf +++ /dev/null diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-sigconf.pdf b/Master/texmf-dist/doc/latex/acmart/samples/sample-sigconf.pdf Binary files differindex f11436a101c..370abe1a405 100644 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-sigconf.pdf +++ b/Master/texmf-dist/doc/latex/acmart/samples/sample-sigconf.pdf diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-sigconf.tex b/Master/texmf-dist/doc/latex/acmart/samples/sample-sigconf.tex index 3236ca5554c..14311a7ccbb 100644 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-sigconf.tex +++ b/Master/texmf-dist/doc/latex/acmart/samples/sample-sigconf.tex @@ -491,6 +491,11 @@ in the printed output of this document. \end{tabular} \end{table*} +Always use midrule to separate table header rows from data rows, and +use it only for this purpose. This enables assistive technologies to +recognise table headers and support their users in navigating tables +more easily. + \section{Math Equations} You may want to display math equations in three distinct styles: inline, numbered or non-numbered display. Each of the three are @@ -548,16 +553,33 @@ in the example below. \caption{1907 Franklin Model D roadster. Photograph by Harris \& Ewing, Inc. [Public domain], via Wikimedia Commons. (\url{https://goo.gl/VLCRBB}).} - \Description{The 1907 Franklin Model D roadster.} + \Description{A woman and a girl in white dresses sit in an open car.} \end{figure} Your figures should contain a caption which describes the figure to -the reader. Figure captions go below the figure. Your figures should -{\bfseries also} include a description suitable for screen readers, to -assist the visually-challenged to better understand your work. +the reader. Figure captions are placed {\itshape below} the figure. +Every figure should also have a figure description unless it is purely +decorative. These descriptions convey what’s in the image to someone +who cannot see it. They are also used by search engine crawlers for +indexing images, and when images cannot be loaded. + +A figure description must be unformatted plain text less than 2000 +characters long (including spaces). {\bfseries Figure descriptions + should not repeat the figure caption – their purpose is to capture + important information that is not already provided in the caption or + the main text of the paper.} For figures that convey important and +complex new information, a short text description may not be +adequate. More complex alternative descriptions can be placed in an +appendix and referenced in a short figure description. For example, +provide a data table capturing the information in a bar chart, or a +structured list representing a graph. For additional information +regarding how best to write figure descriptions and why doing this is +so important, please see +\url{https://www.acm.org/publications/taps/describing-figures/}. + \subsection{The ``Teaser Figure''} A ``teaser figure'' is an image, or set of images in one figure, that @@ -610,17 +632,17 @@ command in the {\bfseries preamble} (before the command Editor00a's series should NOT be present since it has no vol. no.), a chapter in a divisible book \cite{Spector90}, a chapter in a divisible book in a series \cite{Douglass98}, a multi-volume work as - book \cite{Knuth97}, an article in a proceedings (of a conference, - symposium, workshop for example) (paginated proceedings article) - \cite{Andler79}, a proceedings article with all possible elements - \cite{Smith10}, an example of an enumerated proceedings article - \cite{VanGundy07}, an informally published work \cite{Harel78}, - a couple of preprints \cite{Bornmann2019, AnzarootPBM14}, - a doctoral dissertation \cite{Clarkson85}, a master's thesis: - \cite{anisi03}, an online document / world wide web resource - \cite{Thornburg01, Ablamowicz07, Poker06}, a video game (Case 1) - \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} and - (Case 3) a patent \cite{JoeScientist001}, work accepted for + book \cite{Knuth97}, a couple of articles in a proceedings (of a + conference, symposium, workshop for example) (paginated proceedings + article) \cite{Andler79, Hagerup1993}, a proceedings article with + all possible elements \cite{Smith10}, an example of an enumerated + proceedings article \cite{VanGundy07}, an informally published work + \cite{Harel78}, a couple of preprints \cite{Bornmann2019, + AnzarootPBM14}, a doctoral dissertation \cite{Clarkson85}, a + master's thesis: \cite{anisi03}, an online document / world wide web + resource \cite{Thornburg01, Ablamowicz07, Poker06}, a video game + (Case 1) \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} + and (Case 3) a patent \cite{JoeScientist001}, work accepted for publication \cite{rous08}, 'YYYYb'-test for prolific author \cite{SaeediMEJ10} and \cite{SaeediJETC10}. Other cites might contain 'duplicate' DOI and URLs (some SIAM articles) diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-sigplan.pdf b/Master/texmf-dist/doc/latex/acmart/samples/sample-sigplan.pdf Binary files differindex 3693877765b..a59f68989c9 100644 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-sigplan.pdf +++ b/Master/texmf-dist/doc/latex/acmart/samples/sample-sigplan.pdf diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-sigplan.tex b/Master/texmf-dist/doc/latex/acmart/samples/sample-sigplan.tex index ee60434b70a..0e8b94af11c 100644 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-sigplan.tex +++ b/Master/texmf-dist/doc/latex/acmart/samples/sample-sigplan.tex @@ -491,6 +491,11 @@ in the printed output of this document. \end{tabular} \end{table*} +Always use midrule to separate table header rows from data rows, and +use it only for this purpose. This enables assistive technologies to +recognise table headers and support their users in navigating tables +more easily. + \section{Math Equations} You may want to display math equations in three distinct styles: inline, numbered or non-numbered display. Each of the three are @@ -548,16 +553,33 @@ in the example below. \caption{1907 Franklin Model D roadster. Photograph by Harris \& Ewing, Inc. [Public domain], via Wikimedia Commons. (\url{https://goo.gl/VLCRBB}).} - \Description{The 1907 Franklin Model D roadster.} + \Description{A woman and a girl in white dresses sit in an open car.} \end{figure} Your figures should contain a caption which describes the figure to -the reader. Figure captions go below the figure. Your figures should -{\bfseries also} include a description suitable for screen readers, to -assist the visually-challenged to better understand your work. +the reader. Figure captions are placed {\itshape below} the figure. +Every figure should also have a figure description unless it is purely +decorative. These descriptions convey what’s in the image to someone +who cannot see it. They are also used by search engine crawlers for +indexing images, and when images cannot be loaded. + +A figure description must be unformatted plain text less than 2000 +characters long (including spaces). {\bfseries Figure descriptions + should not repeat the figure caption – their purpose is to capture + important information that is not already provided in the caption or + the main text of the paper.} For figures that convey important and +complex new information, a short text description may not be +adequate. More complex alternative descriptions can be placed in an +appendix and referenced in a short figure description. For example, +provide a data table capturing the information in a bar chart, or a +structured list representing a graph. For additional information +regarding how best to write figure descriptions and why doing this is +so important, please see +\url{https://www.acm.org/publications/taps/describing-figures/}. + \subsection{The ``Teaser Figure''} A ``teaser figure'' is an image, or set of images in one figure, that @@ -610,17 +632,17 @@ command in the {\bfseries preamble} (before the command Editor00a's series should NOT be present since it has no vol. no.), a chapter in a divisible book \cite{Spector90}, a chapter in a divisible book in a series \cite{Douglass98}, a multi-volume work as - book \cite{Knuth97}, an article in a proceedings (of a conference, - symposium, workshop for example) (paginated proceedings article) - \cite{Andler79}, a proceedings article with all possible elements - \cite{Smith10}, an example of an enumerated proceedings article - \cite{VanGundy07}, an informally published work \cite{Harel78}, - a couple of preprints \cite{Bornmann2019, AnzarootPBM14}, - a doctoral dissertation \cite{Clarkson85}, a master's thesis: - \cite{anisi03}, an online document / world wide web resource - \cite{Thornburg01, Ablamowicz07, Poker06}, a video game (Case 1) - \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} and - (Case 3) a patent \cite{JoeScientist001}, work accepted for + book \cite{Knuth97}, a couple of articles in a proceedings (of a + conference, symposium, workshop for example) (paginated proceedings + article) \cite{Andler79, Hagerup1993}, a proceedings article with + all possible elements \cite{Smith10}, an example of an enumerated + proceedings article \cite{VanGundy07}, an informally published work + \cite{Harel78}, a couple of preprints \cite{Bornmann2019, + AnzarootPBM14}, a doctoral dissertation \cite{Clarkson85}, a + master's thesis: \cite{anisi03}, an online document / world wide web + resource \cite{Thornburg01, Ablamowicz07, Poker06}, a video game + (Case 1) \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} + and (Case 3) a patent \cite{JoeScientist001}, work accepted for publication \cite{rous08}, 'YYYYb'-test for prolific author \cite{SaeediMEJ10} and \cite{SaeediJETC10}. Other cites might contain 'duplicate' DOI and URLs (some SIAM articles) diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-xelatex.pdf b/Master/texmf-dist/doc/latex/acmart/samples/sample-xelatex.pdf Binary files differindex 620d2448cfc..b133ccef1c0 100644 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-xelatex.pdf +++ b/Master/texmf-dist/doc/latex/acmart/samples/sample-xelatex.pdf diff --git a/Master/texmf-dist/doc/latex/acmart/samples/sample-xelatex.tex b/Master/texmf-dist/doc/latex/acmart/samples/sample-xelatex.tex index a1ab8bf1470..63f3ae9cf2b 100644 --- a/Master/texmf-dist/doc/latex/acmart/samples/sample-xelatex.tex +++ b/Master/texmf-dist/doc/latex/acmart/samples/sample-xelatex.tex @@ -491,6 +491,11 @@ in the printed output of this document. \end{tabular} \end{table*} +Always use midrule to separate table header rows from data rows, and +use it only for this purpose. This enables assistive technologies to +recognise table headers and support their users in navigating tables +more easily. + \section{Math Equations} You may want to display math equations in three distinct styles: inline, numbered or non-numbered display. Each of the three are @@ -548,16 +553,33 @@ in the example below. \caption{1907 Franklin Model D roadster. Photograph by Harris \& Ewing, Inc. [Public domain], via Wikimedia Commons. (\url{https://goo.gl/VLCRBB}).} - \Description{The 1907 Franklin Model D roadster.} + \Description{A woman and a girl in white dresses sit in an open car.} \end{figure} Your figures should contain a caption which describes the figure to -the reader. Figure captions go below the figure. Your figures should -{\bfseries also} include a description suitable for screen readers, to -assist the visually-challenged to better understand your work. +the reader. Figure captions are placed {\itshape below} the figure. +Every figure should also have a figure description unless it is purely +decorative. These descriptions convey what’s in the image to someone +who cannot see it. They are also used by search engine crawlers for +indexing images, and when images cannot be loaded. + +A figure description must be unformatted plain text less than 2000 +characters long (including spaces). {\bfseries Figure descriptions + should not repeat the figure caption – their purpose is to capture + important information that is not already provided in the caption or + the main text of the paper.} For figures that convey important and +complex new information, a short text description may not be +adequate. More complex alternative descriptions can be placed in an +appendix and referenced in a short figure description. For example, +provide a data table capturing the information in a bar chart, or a +structured list representing a graph. For additional information +regarding how best to write figure descriptions and why doing this is +so important, please see +\url{https://www.acm.org/publications/taps/describing-figures/}. + \subsection{The ``Teaser Figure''} A ``teaser figure'' is an image, or set of images in one figure, that @@ -610,17 +632,17 @@ command in the {\bfseries preamble} (before the command Editor00a's series should NOT be present since it has no vol. no.), a chapter in a divisible book \cite{Spector90}, a chapter in a divisible book in a series \cite{Douglass98}, a multi-volume work as - book \cite{Knuth97}, an article in a proceedings (of a conference, - symposium, workshop for example) (paginated proceedings article) - \cite{Andler79}, a proceedings article with all possible elements - \cite{Smith10}, an example of an enumerated proceedings article - \cite{VanGundy07}, an informally published work \cite{Harel78}, - a couple of preprints \cite{Bornmann2019, AnzarootPBM14}, - a doctoral dissertation \cite{Clarkson85}, a master's thesis: - \cite{anisi03}, an online document / world wide web resource - \cite{Thornburg01, Ablamowicz07, Poker06}, a video game (Case 1) - \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} and - (Case 3) a patent \cite{JoeScientist001}, work accepted for + book \cite{Knuth97}, a couple of articles in a proceedings (of a + conference, symposium, workshop for example) (paginated proceedings + article) \cite{Andler79, Hagerup1993}, a proceedings article with + all possible elements \cite{Smith10}, an example of an enumerated + proceedings article \cite{VanGundy07}, an informally published work + \cite{Harel78}, a couple of preprints \cite{Bornmann2019, + AnzarootPBM14}, a doctoral dissertation \cite{Clarkson85}, a + master's thesis: \cite{anisi03}, an online document / world wide web + resource \cite{Thornburg01, Ablamowicz07, Poker06}, a video game + (Case 1) \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} + and (Case 3) a patent \cite{JoeScientist001}, work accepted for publication \cite{rous08}, 'YYYYb'-test for prolific author \cite{SaeediMEJ10} and \cite{SaeediJETC10}. Other cites might contain 'duplicate' DOI and URLs (some SIAM articles) diff --git a/Master/texmf-dist/doc/latex/acmart/samples/samples.dtx b/Master/texmf-dist/doc/latex/acmart/samples/samples.dtx index e4236f1e4a9..ed8e0af0da3 100644 --- a/Master/texmf-dist/doc/latex/acmart/samples/samples.dtx +++ b/Master/texmf-dist/doc/latex/acmart/samples/samples.dtx @@ -9,7 +9,7 @@ %<authordraft>\documentclass[sigconf,authordraft]{acmart} %<sigplan>\documentclass[sigplan,screen]{acmart} %<sigchi>\documentclass[sigchi]{acmart} -%<sigchi-a>\documentclass[sigchi-a]{acmart} +%<sigchi-a>\documentclass[sigchi-a, nonacm]{acmart} %% %% \BibTeX command to typeset BibTeX logo in the docs @@ -512,6 +512,12 @@ in the printed output of this document. \end{tabular} \end{table*} +Always use midrule to separate table header rows from data rows, and +use it only for this purpose. This enables assistive technologies to +recognise table headers and support their users in navigating tables +more easily. + + \section{Math Equations} You may want to display math equations in three distinct styles: inline, numbered or non-numbered display. Each of the three are @@ -570,17 +576,35 @@ in the example below. \caption{1907 Franklin Model D roadster. Photograph by Harris \& Ewing, Inc. [Public domain], via Wikimedia Commons. (\url{https://goo.gl/VLCRBB}).} - \Description{The 1907 Franklin Model D roadster.} + \Description{A woman and a girl in white dresses sit in an open car.} %<!sigchi-a>\end{figure} %<sigchi-a>\end{marginfigure} Your figures should contain a caption which describes the figure to -the reader. Figure captions go below the figure. Your figures should -{\bfseries also} include a description suitable for screen readers, to -assist the visually-challenged to better understand your work. +the reader. Figure captions are placed {\itshape below} the figure. +Every figure should also have a figure description unless it is purely +decorative. These descriptions convey what’s in the image to someone +who cannot see it. They are also used by search engine crawlers for +indexing images, and when images cannot be loaded. + +A figure description must be unformatted plain text less than 2000 +characters long (including spaces). {\bfseries Figure descriptions + should not repeat the figure caption – their purpose is to capture + important information that is not already provided in the caption or + the main text of the paper.} For figures that convey important and +complex new information, a short text description may not be +adequate. More complex alternative descriptions can be placed in an +appendix and referenced in a short figure description. For example, +provide a data table capturing the information in a bar chart, or a +structured list representing a graph. For additional information +regarding how best to write figure descriptions and why doing this is +so important, please see +\url{https://www.acm.org/publications/taps/describing-figures/}. + + \subsection{The ``Teaser Figure''} A ``teaser figure'' is an image, or set of images in one figure, that @@ -633,17 +657,17 @@ command in the {\bfseries preamble} (before the command Editor00a's series should NOT be present since it has no vol. no.), a chapter in a divisible book \cite{Spector90}, a chapter in a divisible book in a series \cite{Douglass98}, a multi-volume work as - book \cite{Knuth97}, an article in a proceedings (of a conference, - symposium, workshop for example) (paginated proceedings article) - \cite{Andler79}, a proceedings article with all possible elements - \cite{Smith10}, an example of an enumerated proceedings article - \cite{VanGundy07}, an informally published work \cite{Harel78}, - a couple of preprints \cite{Bornmann2019, AnzarootPBM14}, - a doctoral dissertation \cite{Clarkson85}, a master's thesis: - \cite{anisi03}, an online document / world wide web resource - \cite{Thornburg01, Ablamowicz07, Poker06}, a video game (Case 1) - \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} and - (Case 3) a patent \cite{JoeScientist001}, work accepted for + book \cite{Knuth97}, a couple of articles in a proceedings (of a + conference, symposium, workshop for example) (paginated proceedings + article) \cite{Andler79, Hagerup1993}, a proceedings article with + all possible elements \cite{Smith10}, an example of an enumerated + proceedings article \cite{VanGundy07}, an informally published work + \cite{Harel78}, a couple of preprints \cite{Bornmann2019, + AnzarootPBM14}, a doctoral dissertation \cite{Clarkson85}, a + master's thesis: \cite{anisi03}, an online document / world wide web + resource \cite{Thornburg01, Ablamowicz07, Poker06}, a video game + (Case 1) \cite{Obama08} and (Case 2) \cite{Novak03} and \cite{Lee05} + and (Case 3) a patent \cite{JoeScientist001}, work accepted for publication \cite{rous08}, 'YYYYb'-test for prolific author \cite{SaeediMEJ10} and \cite{SaeediJETC10}. Other cites might contain 'duplicate' DOI and URLs (some SIAM articles) diff --git a/Master/texmf-dist/doc/latex/acmart/samples/samples.ins b/Master/texmf-dist/doc/latex/acmart/samples/samples.ins index b98cca55ab8..2384a5f27d6 100644 --- a/Master/texmf-dist/doc/latex/acmart/samples/samples.ins +++ b/Master/texmf-dist/doc/latex/acmart/samples/samples.ins @@ -14,9 +14,8 @@ \file{sample-sigconf.tex}{\from{samples.dtx}{sigconf}} \file{sample-authordraft.tex}{\from{samples.dtx}{authordraft}} \file{sample-xelatex.tex}{\from{samples.dtx}{sigconf}} + \file{sample-lualatex.tex}{\from{samples.dtx}{sigconf}} \file{sample-sigplan.tex}{\from{samples.dtx}{sigplan}} - \file{sample-sigchi.tex}{\from{samples.dtx}{sigchi}} - \file{sample-sigchi-a.tex}{\from{samples.dtx}{sigchi-a}} \file{sample-acmsmall-conf.tex}{\from{samples.dtx}{acmsmall-conf}} } diff --git a/Master/texmf-dist/source/latex/acmart/Makefile b/Master/texmf-dist/source/latex/acmart/Makefile index 68e33d0437d..916c87c9f1d 100644 --- a/Master/texmf-dist/source/latex/acmart/Makefile +++ b/Master/texmf-dist/source/latex/acmart/Makefile @@ -66,6 +66,14 @@ samples/sample-xelatex.pdf: samples/sample-xelatex.tex samples/$(PACKAGE).cls while ( grep -q '^LaTeX Warning: Label(s) may have changed' $(basename $<).log) \ do cd $(dir $@) && xelatex-dev $(notdir $<); done +samples/sample-lualatex.pdf: samples/sample-lualatex.tex samples/$(PACKAGE).cls samples/ACM-Reference-Format.bst + cd $(dir $@) && lualatex-dev $(notdir $<) + - cd $(dir $@) && bibtex $(notdir $(basename $<)) + cd $(dir $@) && lualatex-dev $(notdir $<) + cd $(dir $@) && lualatex-dev $(notdir $<) + while ( grep -q '^LaTeX Warning: Label(s) may have changed' $(basename $<).log) \ + do cd $(dir $@) && lualatex-dev $(notdir $<); done + .PRECIOUS: $(PACKAGE).cfg $(PACKAGE).cls diff --git a/Master/texmf-dist/source/latex/acmart/acmart.dtx b/Master/texmf-dist/source/latex/acmart/acmart.dtx index 72e256f18cd..36b1cbe6a68 100644 --- a/Master/texmf-dist/source/latex/acmart/acmart.dtx +++ b/Master/texmf-dist/source/latex/acmart/acmart.dtx @@ -1,6 +1,6 @@ % \iffalse % -% Copyright 2016-2019, Association for Computing Machinery +% Copyright 2016-2020, Association for Computing Machinery % This work may be distributed and/or modified under the % conditions of the LaTeX Project Public License, either % version 1.3 of this license or (at your option) any @@ -19,7 +19,6 @@ % acmart.cls, the files ACM-Reference-Format.bst, and templates % sample-acmlarge.tex, sample-acmsmall.tex, sample-acmtog.tex, % samplebody-conf.tex, samplebody-journals.tex, sample-manuscript.tex, -% sample-sigchi-a.tex, sample-sigchi.tex, % sample-sigconf-authordraft.tex, sample-sigconf.tex, % sample-sigplan.tex % @@ -58,7 +57,7 @@ % \ifx\currentjob\guide\OnlyDescription\fi % \GetFileInfo{acmart.dtx} % \title{\LaTeX{} Class for the \emph{Association for Computing -% Machinery}\thanks{\copyright 2016--2019, Association for Computing Machinery}} +% Machinery}\thanks{\copyright 2016--2020, Association for Computing Machinery}} % \author{Boris Veytsman\thanks{% % \href{mailto:borisv@lk.net}{\texttt{borisv@lk.net}}, % \href{mailto:boris@varphi.com}{\texttt{boris@varphi.com}}}} @@ -102,6 +101,7 @@ % Leif Andersen, % Lawrence Christopher Angrave, % Dirk Beyer, +% Andrew Black, % Joachim Breitner, % Benjamin Byholm, % Nils Anders Danielsson, @@ -111,6 +111,7 @@ % Ben Greenman, % Enrico Gregorio, % Jamie Davis, +% Jason Hemann, % Peter Kemp, % Luis Leiva, % Ben Liblit, @@ -137,6 +138,7 @@ % Stephen Spencer, % Shin Hwei Tan, % Daniel Thomas, +% Shari Trewin, % Zack Weinberg, % John Wickerson % and many others for their invaluable help. @@ -221,8 +223,7 @@ % \item \textsl{geometry}, \url{http://www.ctan.org/pkg/geometry} % \item \textsl{graphics}, \url{http://www.ctan.org/pkg/graphics} % \item \textsl{hyperref}, \url{http://www.ctan.org/pkg/hyperref} -% \item \textsl{ifluatex}, \url{http://www.ctan.org/pkg/ifluatex} -% \item \textsl{ifxetex}, \url{http://www.ctan.org/pkg/ifxetex} +% \item \textsl{iftex}, \url{http://www.ctan.org/pkg/iftex} % \item \textsl{inconsolata}, \url{http://www.ctan.org/pkg/inconsolata} % \item \textsl{libertine}, \url{http://www.ctan.org/pkg/libertine} % \item \textsl{manyfoot}, \url{http://www.ctan.org/pkg/manyfoot} @@ -309,12 +310,16 @@ % conferences (with the exceptions listed below) and all ICPS % volumes.\\ % sigplan & Proceedings format for SIGPLAN conferences.\\ -% sigchi & Proceedings format for SIGCHI conferences.\\ -% sigchi-a & Format for SIGCHI extended abstracts.\\ % \bottomrule % \end{tabularx} % \end{table} % +% Starting in 2020, ACM retired formats |sigchi| and |sigchi-a|. +% SIGCHI conferences now use |sigconf| format for their publications. +% If a file uses |sigchi| format, a warning is issued, and the format +% is automatically switched to |sigconf|. Format |sigchi-a| can be +% used for non-ACM documents only (see Section~\ref{sec:sigchi-a}). +% % There are several Boolean options that can take |true| or |false| % values. They are listed in Table~\ref{tab:opts_bool}. The words % |=true| can be omitted when setting a Boolean option, so instead of @@ -875,13 +880,12 @@ % \cs{acmBadgeR}\oarg{url}\marg{graphics} and % \cs{acmBadgeL}\oarg{url}\marg{graphics}. The first command puts the % badge to the right of the title, and the second one---to the left. -% The exception is the |sigchi-a| mode for SIGCHI extended abstracts, -% which puts the badges on the left margin. The arguments have the -% following meaning: \oarg{url}, if provided, sets the link to the -% badge authority in the screen version, while \marg{graphics} sets -% the graphics file with the badge image. The file must be a cropped -% square, which is scaled to a standard size in the output. For -% example, if the badge image is |ae-logo.pdf|, the command is +% The arguments have the following meaning: \oarg{url}, if provided, +% sets the link to the badge authority in the screen version, while +% \marg{graphics} sets the graphics file with the badge image. The +% file must be a cropped square, which is scaled to a standard size in +% the output. For example, if the badge image is |ae-logo.pdf|, the +% command is % \begin{verbatim} % \acmBadgeR[http://ctuning.org/ae/ppopp2016.html]{ae-logo} % \end{verbatim} @@ -1154,8 +1158,6 @@ % \item[figure*, table*] in two-column formats, a special figure or % table taking a full text width. % \item[teaserfigure:] a special figure before \cs{maketitle}. -% \item[sidebar, marginfigure, margintable:] in the |sigchi-a| format, -% special sidebars, tables and figures in the margin. % \end{description} % % \item Accordingly, when scaling images, one should use the @@ -1166,9 +1168,6 @@ % use \cs{columnwidth}, which coincides with \cs{textwidth} in this % case. % \item For |figure| in two-column mode, use \cs{columnwidth}. -% \item For |marginfigure|, use \cs{marginparwidth}. -% \item For |figure*| in SIGCHI extended -% abstracts, use \cs{fulltextwidth}. % \end{enumerate} % % \end{enumerate} @@ -1217,23 +1216,11 @@ % \end{table} % \end{verbatim} % -% \DescribeEnv{sidebar}% -% \DescribeEnv{marginfigure}% -% \DescribeEnv{margintable}% -% SIGCHI extended abstracts use margin space extensively. This package -% provides three environments for this with optional captions: -% \begin{description} -% \item[sidebar:] textual information in the margin -% \item[marginfigure:] a figure in the margin -% \item[margintable:] a table in the margin -% \end{description} -% % -% Tables and figures (including margin tables and margin figures) are -% by default centered. However, in some cases (for example, when you -% use several subimages per figure) you may need to override this. -% A good way to do so is to put the contents into a -% \cs{minipage} of the width \cs{columnwidth}. +% Tables and figures are by default centered. However, in some cases +% (for example, when you use several subimages per figure) you may +% need to override this. A good way to do so is to put the contents +% into a \cs{minipage} of the width \cs{columnwidth}. % % %\subsection{Descriptions of images} @@ -1819,6 +1806,48 @@ % special ``publication'' type FACMP, a forthcoming ACM publication, % reserved for new journals which are not assigned an ISSN yet. % +% +%\subsection{A note about \texttt{sigchi-a} format} +%\label{sec:sigchi-a} +% +% Starting in Spring 2020 ACM retired SIGCHI Extended Abstract format +% (|sigchi-a|). ACM will not, under any circumstances, accept +% documents in this format for publication and will not offer +% technical support to the authors who use this template. +% +% You may use this format in the |nonacm| mode only, as in +% \begin{verbatim} +% \documentclass[sigchi-a, nonacm]{acmart} +% \end{verbatim} +% +% +% +% \DescribeEnv{sidebar}% +% \DescribeEnv{marginfigure}% +% \DescribeEnv{margintable}% +% This format has large margin uses for special figures and +% tables. This package provides three environments for this with +% optional captions: +% \begin{description} +% \item[sidebar:] textual information in the margin, +% \item[marginfigure:] a figure in the margin, +% \item[margintable:] a table in the margin. +% \end{description} +% +% The environments |figure| and |table| produce figures and tables +% with the width of the text column. The environments |figure*| and +% |table*| produce ``wide'' figures and tables, which take a large +% part of the margin. +% +% The horizontal sizes of figures are: +% \begin{enumerate} +% \item |figure|: \cs{columnwidth}, +% \item |marginfigure|: \cs{marginparwidth}, +% \item |figure*|: \cs{fulltextwidth}. +% \end{enumerate} +% +% +% % \StopEventually{ % \clearpage % \bibliography{acmart} @@ -1842,7 +1871,7 @@ \ProvidesFile{acmart.dtx} %</gobble> %<class>\ProvidesClass{acmart} -[2020/02/22 v1.70 Typesetting articles for the Association for Computing Machinery] +[2020/04/30 v1.71 Typesetting articles for the Association for Computing Machinery] % \end{macrocode} % % \changes{v1.00}{2016/04/14}{First released version} @@ -1943,6 +1972,10 @@ % papers over two pages} % \changes{1.66}{2019/12/18}{Authors' addresses are mandatory for % journal articles} +% \changes{1.71}{2020/05/01}{Retired sigchi and sigchi-a} +% \changes{1.71}{2020/05/02}{Bibliography change: volume for +% @inproceedings is now in brackets together with series} +% \changes{1.71}{2020/05/02}{LuaTeX now uses the OTF versions of fonts} % % And the driver code: % \begin{macrocode} @@ -1992,6 +2025,11 @@ \RequirePackage{xstring} % \end{macrocode} % +% We need |iftex| to check the engine +% \begin{macrocode} +\RequirePackage{iftex} +% \end{macrocode} +% % % % \begin{macro}{format} @@ -2276,10 +2314,30 @@ % Setting up switches % \begin{macrocode} \ifnum\ACM@format@nr=5\relax % siggraph - \ClassWarning{\@classname}{The format siggraph is now obsolete. - I am switching to sigconf.} +\ClassWarning{\@classname}{% + The format siggraph is now obsolete.\MessageBreak + I am switching to sigconf.} + \setkeys{acmart.cls}{format=sigconf} +\fi +\ifnum\ACM@format@nr=7\relax % sigchi +\ClassWarning{\@classname}{% + The format sigchi is now obsolete.\MessageBreak + I am switching to sigconf.} \setkeys{acmart.cls}{format=sigconf} \fi +\ifnum\ACM@format@nr=8\relax % sigchi +\ClassWarning{\@classname}{% + ACM SIGCHI has retired the SIGCHI-A template\MessageBreak + effective immediately. ACM is keeping this template\MessageBreak + option available to authors who are working on legacy\MessageBreak + documents only. ACM will not, under any circumstances,\MessageBreak + accept documents in this format for publication and\MessageBreak + will not offer technical support to the authors who use\MessageBreak + this template.\MessageBreak + ACM SIGCHI is directing Conference leaders and\MessageBreak + authors to publish their articles using the SIGCONF\MessageBreak + template call.} +\fi \ifnum\ACM@format@nr=0\relax \@ACM@manuscripttrue \else @@ -2342,7 +2400,7 @@ \or % sigplan \def\ACM@fontsize{10pt}% \or % sigchi - \def\ACM@fontsize{10pt}% + \def\ACM@fontsize{9pt}% \or % sigchi-a \def\ACM@fontsize{10pt}% \fi @@ -2667,9 +2725,10 @@ % \end{macro} % \begin{macro}{\l@subsubsection} % \changes{v1.31}{2017/03/04}{Redefined macro} +% \changes{v1.71}{2020/04/30}{Bug fixed (thanks to Andrew Black)} % The spacing in |amsart| is too large % \begin{macrocode} -\def\l@subsubsection{\@tocline{2}{0pt}{1pc}{5pc}{}} +\def\l@subsubsection{\@tocline{3}{0pt}{1pc}{5pc}{}} % \end{macrocode} % % \end{macro} @@ -2847,7 +2906,7 @@ % \end{macrocode} % % -% Author-draft mode +% Author-draft mode or sigchi-a mode % \begin{macrocode} \if@ACM@authordraft \RequirePackage{draftwatermark} @@ -2856,6 +2915,17 @@ \SetWatermarkText{\parbox{12em}{\centering Unpublished working draft.\\ Not for distribution.}} +\else + \if@ACM@sigchiamode + \if@ACM@nonacm\else + \RequirePackage{draftwatermark} + \SetWatermarkFontSize{0.5in} + \SetWatermarkColor[gray]{.9} + \SetWatermarkText{\parbox{12em}{\centering + Legacy document. \\ + Not for publication in an ACM venue}} + \fi + \fi \fi % \end{macrocode} % @@ -3125,14 +3195,19 @@ % \begin{macrocode} \if@ACM@newfonts \RequirePackage[T1]{fontenc} -\ifxetex - \RequirePackage[tt=false]{libertine} - \setmonofont{inconsolata} -\else - \RequirePackage[tt=false, type1=true]{libertine} -\fi -\RequirePackage[varqu]{zi4} -\RequirePackage[libertine]{newtxmath} + \ifxetex + \RequirePackage[tt=false]{libertine} + \setmonofont[StylisticSet=3]{inconsolata} + \else + \ifluatex + \RequirePackage[tt=false]{libertine} + \setmonofont[StylisticSet=3]{inconsolata} + \else + \RequirePackage[tt=false, type1=true]{libertine} + \RequirePackage[varqu]{zi4} + \fi + \fi + \RequirePackage[libertine]{newtxmath} \fi % \end{macrocode} % diff --git a/Master/texmf-dist/tex/latex/acmart/acmart.cls b/Master/texmf-dist/tex/latex/acmart/acmart.cls index 35fb12ec038..239698b8946 100644 --- a/Master/texmf-dist/tex/latex/acmart/acmart.cls +++ b/Master/texmf-dist/tex/latex/acmart/acmart.cls @@ -37,7 +37,7 @@ %% Right brace \} Tilde \~} \NeedsTeXFormat{LaTeX2e} \ProvidesClass{acmart} -[2020/02/22 v1.70 Typesetting articles for the Association for Computing Machinery] +[2020/04/30 v1.71 Typesetting articles for the Association for Computing Machinery] \def\@classname{acmart} \InputIfFileExists{acmart-preload-hook.tex}{% \ClassWarning{\@classname}{% @@ -45,6 +45,7 @@ for any problems from now on.}}{} \RequirePackage{xkeyval} \RequirePackage{xstring} +\RequirePackage{iftex} \define@choicekey*+{acmart.cls}{format}[\ACM@format\ACM@format@nr]{% manuscript, acmsmall, acmlarge, acmtog, sigconf, siggraph, sigplan, sigchi, sigchi-a}[manuscript]{}{% @@ -167,10 +168,30 @@ \newif\if@ACM@journal@bibstrip \newif\if@ACM@sigchiamode \ifnum\ACM@format@nr=5\relax % siggraph - \ClassWarning{\@classname}{The format siggraph is now obsolete. - I am switching to sigconf.} +\ClassWarning{\@classname}{% + The format siggraph is now obsolete.\MessageBreak + I am switching to sigconf.} + \setkeys{acmart.cls}{format=sigconf} +\fi +\ifnum\ACM@format@nr=7\relax % sigchi +\ClassWarning{\@classname}{% + The format sigchi is now obsolete.\MessageBreak + I am switching to sigconf.} \setkeys{acmart.cls}{format=sigconf} \fi +\ifnum\ACM@format@nr=8\relax % sigchi +\ClassWarning{\@classname}{% + ACM SIGCHI has retired the SIGCHI-A template\MessageBreak + effective immediately. ACM is keeping this template\MessageBreak + option available to authors who are working on legacy\MessageBreak + documents only. ACM will not, under any circumstances,\MessageBreak + accept documents in this format for publication and\MessageBreak + will not offer technical support to the authors who use\MessageBreak + this template.\MessageBreak + ACM SIGCHI is directing Conference leaders and\MessageBreak + authors to publish their articles using the SIGCONF\MessageBreak + template call.} +\fi \ifnum\ACM@format@nr=0\relax \@ACM@manuscripttrue \else @@ -220,7 +241,7 @@ \or % sigplan \def\ACM@fontsize{10pt}% \or % sigchi - \def\ACM@fontsize{10pt}% + \def\ACM@fontsize{9pt}% \or % sigchi-a \def\ACM@fontsize{10pt}% \fi @@ -439,7 +460,7 @@ } \def\l@section{\@tocline{1}{0pt}{1pc}{2pc}{}} \def\l@subsection{\@tocline{2}{0pt}{1pc}{3pc}{}} -\def\l@subsubsection{\@tocline{2}{0pt}{1pc}{5pc}{}} +\def\l@subsubsection{\@tocline{3}{0pt}{1pc}{5pc}{}} \def\@makefntext{\noindent\@makefnmark} \if@ACM@sigchiamode \long\def\@footnotetext#1{\marginpar{% @@ -547,6 +568,17 @@ \SetWatermarkText{\parbox{12em}{\centering Unpublished working draft.\\ Not for distribution.}} +\else + \if@ACM@sigchiamode + \if@ACM@nonacm\else + \RequirePackage{draftwatermark} + \SetWatermarkFontSize{0.5in} + \SetWatermarkColor[gray]{.9} + \SetWatermarkText{\parbox{12em}{\centering + Legacy document. \\ + Not for publication in an ACM venue}} + \fi + \fi \fi \RequirePackage{geometry} \ifcase\ACM@format@nr @@ -692,14 +724,19 @@ TeX}\@ACM@newfontsfalse} \if@ACM@newfonts \RequirePackage[T1]{fontenc} -\ifxetex - \RequirePackage[tt=false]{libertine} - \setmonofont{inconsolata} -\else - \RequirePackage[tt=false, type1=true]{libertine} -\fi -\RequirePackage[varqu]{zi4} -\RequirePackage[libertine]{newtxmath} + \ifxetex + \RequirePackage[tt=false]{libertine} + \setmonofont[StylisticSet=3]{inconsolata} + \else + \ifluatex + \RequirePackage[tt=false]{libertine} + \setmonofont[StylisticSet=3]{inconsolata} + \else + \RequirePackage[tt=false, type1=true]{libertine} + \RequirePackage[varqu]{zi4} + \fi + \fi + \RequirePackage[libertine]{newtxmath} \fi \let\liningnums\@undefined \AtEndPreamble{% |