8 files changed, 1208 insertions, 1 deletions
diff --git a/Master/texmf-dist/doc/latex/tocdata/README b/Master/texmf-dist/doc/latex/tocdata/README
new file mode 100644
index 00000000000..5ee7f492818
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/tocdata/README
@@ -0,0 +1,38 @@
+The tocdata package
+Adds names to table of contents / list of figures entries.
+
+v0.11 — 2016/07/11
+Copyright 2016 Brian Dunn — www.BDTechConcepts.com
+LaTeX Project Public License, version 1.3
+
+
+Summary:
+
+The tocdata package may be used to add a small amount of data to an
+entry in the table of contents or list of figures, between the
+section name and the page number.  The typical use would be to add
+the name of an author or artist of a chapter or section, such as in
+an anthology or a collection of papers.
+
+Additionally, user-level macros are provided which add the author's
+name to a chapter or section, along with an optional prefix and/or
+suffix, and add to a figure the artist's name, prefix, and suffix,
+plus optional additional text.  Author and artist names are also
+added to the index.  Additional user-level macros control formatting.
+
+
+Requirements:
+
+Tocdata requires the use of either the titletoc package or
+the tocloft package.
+
+
+Alternatives:
+
+Tocdata places onto a single line the chapter/section name, author/artist
+name, and page number.  Numerous other methods are available for adding
+names to the TOC, but these usually place the chapter/section name and
+page number onto one line, with the additional information on another line.
+These methods would be preferable, and often required, if you wish
+to place a lot of information in the TOC, or have long chapter or
+section names.
diff --git a/Master/texmf-dist/doc/latex/tocdata/tocdata.pdf b/Master/texmf-dist/doc/latex/tocdata/tocdata.pdf
new file mode 100644
index 00000000000..fc576e5003a
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/tocdata/tocdata.pdf
diff --git a/Master/texmf-dist/source/latex/tocdata/tocdata.dtx b/Master/texmf-dist/source/latex/tocdata/tocdata.dtx
new file mode 100644
index 00000000000..1b6fc2a4a97
--- /dev/null
+++ b/Master/texmf-dist/source/latex/tocdata/tocdata.dtx
@@ -0,0 +1,980 @@
+% \iffalse meta-comment
+%
+% Copyright 2016 Brian Dunn
+%
+% This work may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.3
+% of this license or (at your option) any later version.
+% The latest version of this license is in
+%   http://www.latex-project.org/lppl.txt
+% and version 1.3 or later is part of all distributions of LaTeX
+% version 2005/12/01 or later.
+%
+% \fi
+%
+% \iffalse
+%<package>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
+%<package>\ProvidesPackage{tocdata}
+%<package>    [2016/07/11 v0.11 Adds author/artist to TOC entries.]
+%
+%<*driver>
+\documentclass{ltxdoc}
+
+
+\newcommand{\mypackagename}{tocdata}
+
+\newcommand{\quicksummary}{%
+Optionally prints author, artist, or other data on a line
+of the \acro{TOC}/\acro{LOF}.
+}
+
+
+\usepackage{lmodern}
+% \usepackage{libertine}
+\usepackage[T1]{fontenc}
+\usepackage[utf8]{inputenc}
+\usepackage{textcomp}	% provides \degree, \textquotesingle, \textmu
+
+\usepackage{newunicodechar}
+\newunicodechar{ﬀ}{ff}
+\newunicodechar{ﬁ}{fi}
+\newunicodechar{ﬂ}{fl}
+\newunicodechar{ﬃ}{ffi}
+\newunicodechar{ﬄ}{ffl}
+% \newunicodechar{°}{\degree}
+\newunicodechar{ρ}{\ensuremath{\rho}}
+\newunicodechar{⨯}{\texttimes}
+\newunicodechar{⁄}{\textfractionsolidus}
+% \newunicodechar{®}{\textregistered}
+% \newunicodechar{©}{\textcopyright}
+\newunicodechar{—}{---}
+\newunicodechar{–}{--}
+% \newunicodechar{”}{''}
+% \newunicodechar{“}{``}
+% \newunicodechar{§}{\S}
+% \newunicodechar{¶}{\P}
+% \newunicodechar{†}{\dag}
+\newunicodechar{‡}{\ddag}
+
+\usepackage{microtype}
+
+\usepackage[log-declarations=false]{xparse}
+
+\usepackage[svgnames]{xcolor}
+\definecolor{myurlcolor}{rgb}{0,0,.7}
+\definecolor{mylinkcolor}{rgb}{.7,0,0}
+\definecolor{codecolor}{rgb}{0,.4,.2}
+\definecolor{overviewcolor}{rgb}{0,.2,.4}
+
+
+\usepackage{graphicx}
+\graphicspath{{images/}}
+
+\usepackage{multicol}
+
+\usepackage{enumitem}
+
+\usepackage{array}
+\usepackage{longtable}
+\usepackage{booktabs}
+
+\usepackage[normalem]{ulem}
+
+% \usepackage{verbatim}
+\usepackage{fancyvrb}
+
+\usepackage{comment}
+\excludecomment{testing}
+
+% \usepackage{morefloats}
+% \usepackage{marginfix}
+
+
+
+
+\usepackage{titletoc}
+% \usepackage{tocloft}
+
+
+\usepackage{titleps}
+
+\newpagestyle{pageheadfoot}{
+	\headrule
+	\sethead{\pkg{\mypackagename}}{}{\thepage}
+% 	\renewcommand{\makefootrule}{\rule[2.5ex]{\linewidth}{.4pt}}
+	\setfoot{}{}{}
+}
+
+\pagestyle{pageheadfoot}
+
+
+
+
+\usepackage[pdftex,bookmarks=true,hidelinks,%
+colorlinks,linkcolor=mylinkcolor,urlcolor=myurlcolor,%
+pageanchor=true,hyperindex=false,
+]{hyperref}
+
+\hypersetup{%
+pdfinfo={%
+Title={LaTeX \mypackagename{} package},%
+Author={Brian Dunn},%
+Subject={LaTeX tocdata package},%
+Keywords={LaTeX, tocdata, contents}%
+}}
+
+
+\usepackage{cleveref}
+
+\newcommand{\lmacro}[1]{\textbackslash#1}
+\newcommand{\cmds}[1]{\texttt{#1}}
+\newcommand{\env}[1]{\texttt{#1}}
+\newcommand{\pkg}[1]{\textsf{\textbf{#1}}}
+\newcommand{\acro}[1]{\textsc{\lowercase{#1}}}
+\newcommand{\DescType}[1]{\raggedleft{\scriptsize#1}\quad}
+\newcommand{\DescribeCommand}[1]{\leavevmode\marginpar{\DescType{Cmd}\bfseries\texttt{#1}}\index{#1 (command)}\ignorespaces}
+\newcommand{\DescribeFile}[1]{\leavevmode\marginpar{\DescType{File}\bfseries\texttt{#1}}\index{#1 (file)}\index{files:>#1}\ignorespaces}
+\newcommand{\DescribePackage}[1]{\leavevmode\marginpar{\DescType{Pkg}\bfseries\textsf{#1}}\index{#1 (package)}\index{packages:>#1}\ignorespaces}
+\newcommand{\DescribeBoolean}[1]{\leavevmode\marginpar{\DescType{Bool}\texttt{#1}}\index{#1 (boolean)}\index{booleans:>#1}\ignorespaces}
+\newcommand{\DescribeLength}[1]{\leavevmode\marginpar{\DescType{Len}\cmd{#1}}\index{\cmd{#1} (length)}\index{lengths:>\cmd{#1}}\ignorespaces}
+\newcommand{\DescribeCounter}[1]{\leavevmode\marginpar{\DescType{Ctr}\texttt{#1}}\index{#1 (counter)}\index{counters:>#1}\ignorespaces}
+\newcommand{\DescribeSimple}[1]{\leavevmode\marginpar{\raggedleft\texttt{#1}}\index{#1}\ignorespaces}
+\renewcommand{\PrintEnvName}[1]{\strut \MacroFont {\scriptsize{}Env\quad}#1\ }
+
+
+\newcommand{\tikz}{Ti\textit{k}z}
+\newcommand{\htmlfive}{\acro{HTML}\oldstylenums{5}}
+\newcommand{\cssthree}{\acro{CSS}\oldstylenums{3}}
+
+\newcommand{\goesto}{$\Rightarrow$}
+
+\newenvironment{docsidebar}[1][]
+{\par\addvspace{1.5ex}%
+\hfill\minipage{.9\linewidth}
+\raggedright#1
+%\smallskip\hrule\medskip
+}
+{
+% \smallskip\hrule
+\endminipage\hspace*{\fill}\par\addvspace{1.5ex}}
+
+\makeatletter
+\newcommand{\watchout}[1][]{%
+\@bsphack%
+\marginpar{\hspace*{\fill}\includegraphics[height=3ex]{symbol_warning.pdf}
+\textcolor{DarkRed}{#1}}%
+\@esphack%
+}
+\makeatother
+
+
+
+
+\setlength{\marginparsep}{1em}
+\setlength{\marginparpush}{.7ex}
+\setlength{\parindent}{0em}
+\setlength{\parskip}{2ex}
+\setlength{\IndexMin}{40ex}
+
+\usepackage{\mypackagename}
+
+\setcounter{IndexColumns}{2}
+\setcounter{GlossaryColumns}{1}
+
+\DisableCrossrefs
+\CodelineIndex
+\RecordChanges
+\begin{document}
+  \DocInput{\mypackagename.dtx}
+\end{document}
+%</driver>
+% \fi
+%
+% \CheckSum{0}
+%
+% \CharacterTable
+% {Upper-case     \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%   Digits        \0\1\2\3\4\5\6\7\8\9
+%   Exclamation   \!     Double quote \"      Hash (number) \#
+%   Dollar        \$     Percent       \%     Ampersand     \&
+%   Acute accent \'      Left paren    \(     Right paren   \)
+%   Asterisk      \*     Plus          \+     Comma         \,
+%   Minus         \-     Point         \.     Solidus       \/
+%   Colon         \:     Semicolon     \;     Less than     \<
+%   Equals        \=     Greater than \>      Question mark \?
+%   Commercial at \@     Left bracket \[      Backslash     \\
+%   Right bracket \]     Circumflex    \^     Underscore    \_
+%   Grave accent \`      Left brace    \{     Vertical bar \|
+%   Right brace   \}     Tilde         \~}
+
+% \changes{v0.10}{2016/05/05}{\ 2016/05/05 Initial version.}
+% \changes{v0.11}{2016/07/11}{\ 2016/07/11 Minor docs improvements in spelling, grammar, formatting.}
+
+
+
+% \GetFileInfo{\mypackagename.sty}
+%
+% \DoNotIndex{\newcommand,\renewcommand,\addtocounter,\begin,\end,\begingroup,\endgroup}
+% \DoNotIndex{\global,\ifbool,\ifthenelse,\isequivalentto,\let}
+% \DoNotIndex{\booltrue,\boolfalse}
+% \expandafter\DoNotIndex\expandafter{\detokenize{\(,\),\,,\\,\#,\$,\%,\^,\_,\~,\ ,\&,\{,\}}}
+%
+% \renewcommand{\listfigurename}{List of Illustrations}
+% \begin{titlepage}
+% \centering
+% \vfill
+% ^^A \includegraphics[width=.3\linewidth]{\mypackagename_logo.pdf}
+% \vfill
+% {\Huge The \textbf{\mypackagename} package}
+%
+% \fileversion{} --- \filedate
+%
+% \bigskip
+%
+% {\small\copyright{} 2016} Brian Dunn\\ \small \texttt{bd@BDTechConcepts.com}
+%
+% \vspace{.5in}
+%
+% {\normalsize\textup{\quicksummary}}
+%
+%
+% \vfill
+%
+% 
+% ^^A % \title{The \pkg{lwarp} package\thanks{This document
+% ^^A %   corresponds to \pkg{lwarp}~\fileversion,
+% ^^A %   dated \filedate.}}
+% ^^A % \author{{\small\copyright{} 2016} Brian Dunn\\ \small \texttt{bd@BDTechConcepts.com}}
+% ^^A % \published{}
+% ^^A % \subtitle{\textup{\LaTeX{} to HTML5}}
+% ^^A %
+% ^^A % \maketitle
+%
+% \vfill
+%
+% \begin{abstract}
+% Describes a method for adding information such as an author or artist to
+% each line of a table of contents or list of figures entry,
+% after the title and just before page number.
+% This is commonly done in the table of contents of an anthology, for example.
+%
+% Support is provided for the \pkg{titletoc} and \pkg{tocloft} packages.
+% \end{abstract}
+%
+% \vspace*{\fill}
+% \vspace*{\fill}
+% \vspace*{\fill}
+% \end{titlepage}
+%
+% \tableofcontents
+% \clearpage
+% \listoffigures
+% ^^A \listoftables
+%
+%
+% \thispagestyle{pageheadfoot}
+%
+% \clearpage
+%
+% \sectionauthor{Introduction}{Brian}{Dunn}
+%
+% \begin{figure}
+% \setlength{\fboxsep}{0pt}
+% \centering
+% \fbox{\includegraphics[width=2in]{go_problem.png}}
+% \captionartist{The Opening Challenge}
+%	[Problem 1-2, from \textit{Gokyo Shumyo}]
+%	{Hayashi}{Genbi}
+% \end{figure}
+
+%
+% Anthologies may be printed with the author alongside each title in the
+% table of contents.
+%
+% Many commonly-recommended methods for doing this with \LaTeX, such as those linked to in
+% section \ref{sec:othermethods}, place the author above or below the title and
+% page number, but seldom on the same line.
+%
+% The \pkg{tocdata} package provides some basic infrastructure to help
+% add some information to a line in the table of contents, after the title
+% and just before the page number.  This function requires the use of either
+% the \pkg{titletoc} or \pkg{tocloft} packages.
+%
+% Additionally,
+% user-level macros are provided which add the author's name to a chapter or section,
+% and add the artist's name and optional additional text to a figure.
+% Author and artist names are also added to the index.
+%
+% As examples of the use of these high-level macros,
+% the major section headings of this documentation
+% have the author's name applied, and additional illustrations are supplied as well.
+% The results are demonstrated in the table of contents, list of figures, and the index.
+%
+%
+% \clearpage
+%
+% \sectionauthor[Other Methods]{Other Methods}{Various}{Authors}
+% \label{sec:othermethods}
+%
+% For other methods which place the author on a separate line from the title, see the
+% following.
+%
+% Note that these methods will be preferable if a larger amount of information
+% is to be placed for each title, such that it usually would not all fit on one line
+% \watchout[Too much text!]
+% in the table of contents.
+%
+% \href
+%	{http://tex.stackexchange.com/questions/47554/add-authors-name-automatically-while-building-toc}
+%	{http://tex.stackexchange.com/questions/ \\ \hspace*{1in} 47554/add-authors-name-automatically-while-building-toc}
+%
+% \href
+%	{http://tex.stackexchange.com/questions/110218/add-author-before-chapter-title-in-toc}
+%	{http://tex.stackexchange.com/questions/ \\ \hspace*{1in} 110218/add-author-before-chapter-title-in-toc}
+%
+% \href
+%	{http://tex.stackexchange.com/questions/156862/displaying-author-for-each-chapter-in-book}
+%	{http://tex.stackexchange.com/questions/ \\ \hspace*{1in} 156862/displaying-author-for-each-chapter-in-book}%
+%
+%
+% \begin{figure}
+% \setlength{\fboxsep}{0pt}
+% \centering
+% \fbox{\includegraphics[height=3in]{engineer.jpg}}
+% \captionartist
+% [The Crazy Engineer]
+% {The Crazy Engineer}[Illustration from \textit{The Crazy Engineer} \\ \textit{McGuffey's Fifth Eclectic Reader}]{H. F.}{Farny}
+% \end{figure}
+%
+%
+% \clearpage
+%
+% \begin{figure}
+% \centering
+% \includegraphics[width=3in]{astronometer_herschel.jpg}
+% \captionartist
+%	{Astronometer\label{fig:astronometer}}
+%	[Astronometer made to compare the light of certain stars by the intervention of the moon.]
+%	[Sir]{John}{Herschel}[, 1st Baronet KH FRS]
+% \end{figure}
+%
+% \sectionauthor{How to use \pkg{tocdata}}{Brian}{Dunn}
+%
+% This section shows how to use the \pkg{tocdata} package.
+%
+% There are several layers of macros:
+% \begin{itemize}
+% \item The lowest level provides the basic infrastructure for inserting information
+% into the table of contents, along with hooks for the \pkg{titletoc} and \pkg{tocloft} packages.
+% \item The intermediate-level macro is \cs{tocdata}, which may be used to manually
+% add a piece of data to a \cs{chapter}, \cs{section}, or \cs{caption}.
+% \cs{tocdatafont} is also provided to control the appearance of this data in the \acro{TOC}/\acro{LOF}.
+% \item At the highest level is a sample implementation of user-level macros which provides
+% an easy way to create chapters, sections, and figures with associated authors and artists,
+% along with supplemental information for figures and automatic index entries for both.
+% \end{itemize}
+%
+%
+% \subsection{Basic Setup}
+%
+%
+%
+% \subsubsection{Preamble}
+%
+% \pkg{tocdata} requires the use of either the \pkg{tocloft} or \pkg{titletoc} package.
+%
+% In the preamble, use:
+%
+%
+%	\begin{docsidebar}
+%	|\usepackage{tocloft}|
+%
+%	|\usepackage{tocdata}|
+%	\end{docsidebar}
+%
+%	-\textit{or}-
+%
+%	\begin{docsidebar}
+%	|\usepackage{titletoc}|
+%
+%	|\usepackage{tocdata}|
+%	\end{docsidebar}
+%
+%
+%
+%	\begin{docsidebar}
+% If using \pkg{titletoc}:
+% Note that the user should not use the \cs{dottedcontents} macro, as this
+% is not patched for use with \pkg{tocdata}.  Use \cs{titlecontents} instead,
+% inserting the \cs{TD@usetocdata} macro as shown below.
+%	\end{docsidebar}
+% \vspace{-6ex}\watchout[\cs{dottedcontents}]\vspace{6ex}
+%
+% \subsubsection{Font control in the TOC/LOF}
+%
+% To control the font used for the author on the table-of-contents line,
+% the default is:
+%
+%	\begin{docsidebar}
+%	|\newcommand{\tocdatafont}[1]{{\normalfont\textit{\small#1}}}|
+%	\end{docsidebar}
+%
+%	You may change to other font options, such as:
+%
+%	\begin{docsidebar}
+%	|\renewcommand{\tocdatafont}[1]{\normalfont\textsc{\footnotesize#1}}|
+%	\end{docsidebar}
+%
+%
+% \subsection{Mid-level applications}
+%
+% Should the user only wish to add a bit of text into the \acro{TOC}/\acro{LOF},
+% the \cs{tocdata} macro may be used just before the sectioning or caption command,
+% as shown next.
+%
+% \subsubsection{Adding TOC data per section}
+% Before each \cs{chapter} or \cs{section} which is to have an author or other data:
+%
+%	\begin{docsidebar}
+%	|\tocdata{toc}{Author's Name}| \\
+%	|\chapter{Chapter Title}| \quad -\textit{or}- \quad |\section{Section Title}|
+%	\end{docsidebar}
+%
+%
+% \subsubsection{Adding LOF data per figure}
+% Before each \cs{caption} which is to have an artist:
+%
+%	\begin{docsidebar}
+%	|\tocdata{lof}{Artist's Name}| \\
+%	|\caption{Figure Title}|
+%	\end{docsidebar}
+%
+%	You may wish to print the artist's name in the figure as well.
+%
+%
+% \subsection{High-level user macros}
+%
+% Additional macros are given in section \ref{sec:usermacros}.
+% These are user-level sectioning and captioning commands which add the
+% names to the \acro{TOC} and \acro{LOF},
+% and also add the artist's name and optional additional text
+% to a figure (as in Figure \ref{fig:quail}),
+% and also add the names to the index.
+% An optional prefix and suffix may be attached to the names (as in Figure \ref{fig:astronometer}),
+% and these will be printed at the section heading or caption, but not
+% in the \acro{TOC}/\acro{LOF} or in the index.
+%
+% These macros may be ignored or modified as needed.
+%
+% \subsubsection{Sectioning commands with authors}
+%
+% \DescribeMacro{\chapterauthor}
+% To use these macros, do not use \cs{tocdata} as shown above, but instead use,
+% in the place of \cs{chapter}:
+%
+% \begin{docsidebar}
+% |\chapterauthor[TOC entry]{Title}[Prefix]{First}{Last}[Suffix]|
+% \end{docsidebar}
+%
+% \DescribeMacro{\sectionauthor}
+% or, in the place of \cs{section}:
+%
+% \begin{docsidebar}
+% |\sectionauthor[TOC entry]{Title}[Prefix]{First}{Last}[Suffix]|
+% \end{docsidebar}
+%
+% \subsubsection{Figure captions with artist names and add'l text}
+%
+% \DescribeMacro{\captionartist}
+% For figures, in the place of \cs{caption}:
+%
+% \begin{docsidebar}
+% |\captionartist[LOF entry]{Title}[Text][Prefix]{First}{Last}[Suffix]|
+% \end{docsidebar}
+%
+% If you are using the optional prefix, the optional text must also be given, even if it
+% is empty.  For example, use:
+% \watchout[Optional arguments]
+% \begin{docsidebar}
+%	|\captionartist{Title}|\textcolor{red}{|[]|}|[Sir]{Isaac}{Newton}|
+%
+% \medskip
+%
+% \footnotesize (If only one optional argument is given before the first name, it will be
+% interpreted as the optional text, not as the optional prefix.)
+% \end{docsidebar}
+%
+% \DescribeMacro{\captionartist*}
+% If you are using the \pkg{caption} package or another package which
+% supports \cs{caption*}, you may use \cs{captionartist*} with \pkg{tocdata}.
+% The artist and supplemental text will still be printed below the figure,
+% and an unnumbered caption will be generated, even though a \acro{LOF} entry will not be made.
+%
+% Should you mistakenly use \cs{captionartist*} without the \pkg{caption} package,
+% expect to get a caption with a visible star in it.
+% \watchout[\pkg{caption} package]
+% To fix the problem:\\
+% \hspace*{1em} |\usepackage{caption}|
+%
+% \subsubsection{Formatting in sections and figures}
+%
+% \DescribeMacro{\tocdatachapprint}
+% \DescribeMacro{\tocdatasecprint}
+% To change the formatting of the author names printed after
+% each chapter or section, or to remove them entirely, use
+% these macros, as described in section \ref{sec:usermacros} on page \pageref{sec:usermacros}:
+%
+% 
+% \DescribeMacro{\tocdatafigprint}
+% \DescribeMacro{\tocdatafigtextprint}
+% To change the formatting of a figure's artist's name and optional text,
+% use these macros, also described in section \ref{sec:usermacros}.
+%
+%
+% \StopEventually{\PrintChanges
+% \PrintIndex
+%
+% \begin{figure}[hbp]
+% \centering
+% \setlength{\fboxsep}{2ex}
+% {\fontsize{100}{120}\selectfont$\Omega$}
+% \captionartist{Omega --- The End}{Greek}{Alphabet}
+% \end{figure}
+%}
+%
+% \begin{figure}[hbp]
+% \setlength{\fboxsep}{0pt}
+% \centering
+% \fbox{\includegraphics[width=3in]{quail.jpg}}
+% \captionartist{Quail\label{fig:quail}}
+%	[Illustration from \textit{About Quail} \\ \textit{McGuffey's Fifth Eclectic Reader}]
+%	{Alexander}{Pope}
+% \end{figure}
+%
+% 
+% \clearpage
+%
+% \sectionauthor{Implementation}{Brian}{Dunn}
+%
+% \begin{figure}
+% \centering
+% \includegraphics[width=3in]{diagram_sunbeam.jpg}
+% \captionartist
+%	{Diagram Of A Sunbeam}[]
+%	[Sir]{Isaac}{Newton}
+% \end{figure}
+%
+% Below, the \pkg{tocdata} code section contains the low-level code used to
+% place the data into the table of contents and list of figures, as well as
+% the code to control the font used while doing so.
+%
+% Next are sections used to support \pkg{titletoc} and \pkg{tocloft}.
+%
+% Finally, the high-level macros are provided.  The user may ignore or redefine these
+% as desired.
+%
+%
+% \subsection{Requirements}
+%    \begin{macrocode}
+\RequirePackage{xparse}
+\RequirePackage{etoolbox}
+%    \end{macrocode}
+
+
+% \subsection{\pkg{tocdata} code}
+% \begin{macro}{\TD@thistocdata}
+% Storage for the data to be added to the end of the \acro{TOC} entry:
+%    \begin{macrocode}
+\newcommand{\TD@thistocdata}{}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\settocdata}
+% Written to the |.toc| or |.lof| file, assigns \cs{thistocdata}:
+%    \begin{macrocode}
+\newcommand{\settocdata}[1]{\renewcommand{\TD@thistocdata}{#1}}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\tocdata} \marg{|toc| or |lof|} \marg{text}
+%
+% To be called by a higher-level macro to assign data to a |.toc| or |.lof| file:
+%    \begin{macrocode}
+\newcommand{\tocdata}[2]{%
+\@bsphack\addtocontents{#1}{\protect\settocdata{#2}}\@esphack%
+}
+%    \end{macrocode}
+% \end{macro}
+%
+%
+% \begin{macro}{\tocdatafont} \marg{text}
+%
+% Controls the font for the \acro{TOC} data.
+%
+% |\renewcommand{\tocdatafont}[1]{\textit{#1}}|, etc.
+%
+%    \begin{macrocode}
+\newcommand{\tocdatafont}[1]{{\normalfont\textit{\small#1}}}
+%    \end{macrocode}
+% \end{macro}
+%
+%
+% \begin{macro}{\TD@usetocdata}
+%
+% To be inserted into low-level \acro{TOC}-generation code where the data should appear.
+%
+% See the example using \pkg{titletoc}, below.
+%
+% Prints the data, then clears the storage so it is not printed again.
+%    \begin{macrocode}
+\newcommand{\TD@usetocdata}{%
+\tocdatafont{\TD@thistocdata}%
+\global\def\TD@thistocdata{}%
+}
+%    \end{macrocode}
+% \end{macro}
+
+
+% \subsection{\pkg{titletoc} support}
+%
+% \begin{figure}
+% \centering
+% \setlength{\fboxsep}{2ex}
+%
+% {\fontsize{140}{160}\selectfont$\pi$}
+% \captionartist{Pi --- A Work of Art\label{fig:workofart}}{Greek}{Alphabet}
+% \end{figure}
+%
+%
+% If \pkg{titletoc} is loaded, patch macros for its use:
+%    \begin{macrocode}
+\@ifpackageloaded{titletoc}{
+%    \end{macrocode}
+%
+
+% \DescribeMacro{\titlecontents}
+% A set of \pkg{titletoc} commands which set up the formatting of the
+% \acro{TOC} entries.  These are patched to include the tocdata just after
+% the leader (|titlerule*|), and just before the page number.
+%
+% These macros also include spacing commands, and thus may need to be
+% redefined by the user.
+%
+% Note that the user should not use the \cs{dottedcontents} macro, as this
+% is not patched for use with \pkg{tocdata}.  Use \cs{titlecontents} instead,
+% \watchout[\cs{dottedcontents}]
+% inserting the \cs{TD@usetocdata} macro as shown below.
+%    \begin{macrocode}
+\@ifundefined{chapter}
+{}
+{
+\titlecontents{chapter}[0em]{}{\contentslabel{2.5em}}{}{%
+% \dotfill
+\titlerule*[.75pc]{.}%
+%
+%    \end{macrocode}
+% The new patch goes here:
+%    \begin{macrocode}
+\TD@usetocdata% <-- newly added for the tocdata package
+%
+\contentspage}[\vspace{-.5ex}]
+}
+%    \end{macrocode}
+% Likewise for sections:
+%    \begin{macrocode}
+\titlecontents{section}[2.5em]{}{\contentslabel{2.5em}}{}{%
+% \dotfill
+\titlerule*[.75pc]{.}%
+\TD@usetocdata%
+\contentspage}[\vspace{-.5ex}]
+%    \end{macrocode}
+% Likewise for figures:
+%    \begin{macrocode}
+\titlecontents{figure}[0em]{}{\contentslabel{3em}}{}{%
+% \dotfill
+\titlerule*[1pc]{.}%
+\TD@usetocdata%
+\contentspage}[\vspace{-.5ex}]
+%    \end{macrocode}
+
+%    \begin{macrocode}
+}% end of titletoc loaded
+{% titletoc is not loaded
+}% end of \@ifpackageloaded{titletoc}
+%    \end{macrocode}
+
+
+% \subsection{\pkg{tocloft} support}
+%
+% If \pkg{tocloft} is loaded, the following patches are applied:
+%    \begin{macrocode}
+\@ifpackageloaded{tocloft}
+{
+%    \end{macrocode}
+% If the documentclass includes a chapter level:
+%    \begin{macrocode}
+\if@cfthaschapter
+%    \end{macrocode}
+% \DescribeMacro{\cftXleader} A set of commands used by \cs{tocloft} to
+%	typeset the leader between the title and the page number.
+%	These are patched to print the tocdata just after the leader.
+%    \begin{macrocode}
+\renewcommand{\cftchapleader}{\bfseries\cftdotfill{\cftchapdotsep}\TD@usetocdata}
+\renewcommand{\cftsecleader}{\normalfont\cftdotfill{\cftsecdotsep}\TD@usetocdata}
+\renewcommand{\cftfigleader}{\normalfont\cftdotfill{\cftfigdotsep}\TD@usetocdata}
+\else
+%    \end{macrocode}
+% If there is no chapter level:
+%    \begin{macrocode}
+\renewcommand{\cftsecleader}{\bfseries\cftdotfill{\cftsecdotsep}\TD@usetocdata}
+\renewcommand{\cftfigleader}{\normalfont\cftdotfill{\cftfigdotsep}\TD@usetocdata}
+\fi
+}% end of tocloft patches
+{}% tocloft not loaded
+%    \end{macrocode}
+
+% It is possible to patch the regular \LaTeX{} code here.
+% Look at |book.cls| and |article.cls|,
+% for the macros \cs{l@chapter} and \cs{l@section}, and look in the \LaTeX{}
+% |source2e.pdf| for \cs{\@dottedtocline}.
+%
+%
+%
+%
+% \clearpage
+%
+% \subsection{User-level macros}
+% \label{sec:usermacros}
+%
+% \begin{figure}
+% \centering
+% \includegraphics[width=3in]{newton_astrolabe.jpg}
+% \captionartist{Sir Isaac Newton's Astrolabe}[][Sir]{Isaac}{Newton}
+% \end{figure}
+%
+%
+% Example user-level macros follow.
+%
+% These macros are in addition to the standard sectioning and caption commands,
+% adding first and last names for the table of contents and list of figures.
+% For chapters and sections, the author's name with optional prefix and suffix
+% are also added below the title.
+% For figures, \cs{captionauthor} also prints the figure's artist's
+% name with optional prefix and suffix just below the figure.
+%
+% The regular sectioning and caption commands may still be used for anything
+% which does not have an author/artist name.
+%
+%
+% \begin{macro}{\tocdatachapprint} \marg{prefix} \marg{first} \marg{last} \marg{suffix}
+%
+% User-redefinable macro to print the author's name underneath the chapter title.
+%
+%    \begin{macrocode}
+\@ifundefined{chapter}
+{}% if no chapters
+{% only of chapters exists in this documentclass:
+\newcommand{\tocdatachapprint}[4]
+{\newline\noindent{\normalfont\normalsize\textit{\hspace*{2em}--- #1 #2 #3#4}}}
+}% end of chapters-only
+%    \end{macrocode}
+% To remove the author's name, redefine this as a null function taking four arguments:
+% \begin{docsidebar}
+% |\renewcommand{\tocdatachapprint}[4]{}|
+% \end{docsidebar}
+% \end{macro}
+%
+% \begin{macro}{\tocdatasecprint} \marg{prefix} \marg{first} \marg{last} \marg{suffix}
+%
+% User-redefinable macro to print the author's name underneath the section title.
+%
+%    \begin{macrocode}
+\newcommand{\tocdatasecprint}[4]
+{\newline\noindent{\normalfont\normalsize\textit{\hspace*{2em}--- #1 #2 #3#4}}}
+%    \end{macrocode}
+% To remove the author's name, redefine this as a null function taking four arguments:
+% \begin{docsidebar}
+% |\renewcommand{\tocdatasecprint}[4]{}|
+% \end{docsidebar}
+% \end{macro}
+%
+% \begin{macro}{\chapterauthor} * \oarg{2:TOC entry} \marg{3:title}
+%	\oarg{4:prefix} \marg{5:first} \marg{6:last} \oarg{7:suffix}
+%    \begin{macrocode}
+\@ifundefined{chapter}
+{}% if no chapters
+{% only of chapters exists in this documentclass:
+\NewDocumentCommand{\chapterauthor}{s o m O{} m m O{}}{%
+%    \end{macrocode}
+% The starred version does not create a \acro{TOC} entry,
+% so it is used as-is:
+%    \begin{macrocode}
+\IfBooleanTF{#1}% star:
+{\chapter*{#3\tocdatachapprint{#4}{#5}{#6}{#7}}}
+%    \end{macrocode}
+% The un-starred version appears in the \acro{TOC}, so add the author's name:
+%    \begin{macrocode}
+{% no star:
+\tocdata{toc}{#5 #6}
+%    \end{macrocode}
+% Create the chapter depending on the optional name:
+%    \begin{macrocode}
+\IfValueTF{#2}
+{\chapter[#2]{#3\tocdatachapprint{#4}{#5}{#6}{#7}}}
+{\chapter[#3]{#3\tocdatachapprint{#4}{#5}{#6}{#7}}}
+}
+%    \end{macrocode}
+% Create an index entry depending on whether there is a first name:
+%    \begin{macrocode}
+\ifblank{#5}
+{\index{#6}}
+{\index{#6, #5}}
+}% end of \chapterauthor
+}% end of \@ifundefined{chapter}
+%    \end{macrocode}
+% \end{macro}
+
+
+% \begin{macro}{\sectionauthor} * \oarg{2:TOC entry} \marg{3:title}
+%	\oarg{4:prefix} \marg{5:first} \marg{6:last} \oarg{7:suffix}
+%    \begin{macrocode}
+\NewDocumentCommand{\sectionauthor}{s o m O{} m m O{}}{%
+%    \end{macrocode}
+% The starred version does not create a \acro{TOC} entry,
+% so it is simply used as-is:
+%    \begin{macrocode}
+\IfBooleanTF{#1}% star:
+{\section*{#3\tocdatasecprint{#4}{#5}{#6}{#7}}}
+%    \end{macrocode}
+% The un-starred version appears in the \acro{TOC}, so add the author's name:
+%    \begin{macrocode}
+{% no star:
+\tocdata{toc}{#5 #6}
+%    \end{macrocode}
+% Create the section depending on the optional name:
+%    \begin{macrocode}
+\IfValueTF{#2}
+{\section[#2]{#3\tocdatasecprint{#4}{#5}{#6}{#7}}}
+{\section[#3]{#3\tocdatasecprint{#4}{#5}{#6}{#7}}}
+}
+%    \end{macrocode}
+% Create an index entry depending on whether there is a first name:
+%    \begin{macrocode}
+\ifblank{#5}
+{\index{#6}}
+{\index{#6, #5}}
+}
+%    \end{macrocode}
+% \end{macro}
+
+
+% \begin{macro}{\tocdatafigprint} \marg{prefix} \marg{first} \marg{last} \marg{suffix}
+%
+% User-redefinable macro to print the artist's name underneath the figure.
+%
+%
+%    \begin{macrocode}
+\newcommand{\tocdatafigprint}[4]{%
+\addvspace{1ex}%
+{\centering\footnotesize\textsc{{#1 #2 #3#4}}\par}%
+}
+%    \end{macrocode}
+% To remove the artist's name, redefine this as a null function taking four arguments:
+% \begin{docsidebar}
+% |\renewcommand{\tocdatafigprint}[4]{}|
+% \end{docsidebar}
+% \end{macro}
+%
+%
+% \begin{macro}{\tocdatafigtextprint} \marg{first} \marg{last}
+%
+% User-redefinable macro to print the artist's name underneath the figure.
+%
+%    \begin{macrocode}
+\newcommand{\tocdatafigtextprint}[1]{%
+\addvspace{1ex}%
+{\centering\footnotesize#1\par}%
+}
+%    \end{macrocode}
+% \end{macro}
+
+% \begin{macro}{\captionartist} * \oarg{2:LOF entry} \marg{3:title}
+%	\oarg{4:supplemental text}
+%	\oarg{5: prefix} \marg{6:first} \marg{7:last} \oarg{8:suffix}
+%
+% This macro adds optional supplemental text, which will be printed below the
+% artist's name and above the caption, presuming that the caption is generated
+% below the figure.
+%
+% If using the optional prefix, the optional text must also be given, even if it
+% is empty.  For example, use:
+% \watchout[Optional arguments]
+% \begin{docsidebar}
+%	|\captionartist{Title}|\textcolor{red}{|[]|}|[Sir]{Isaac}{Newton}|
+%
+% \medskip
+%
+% \footnotesize (If only one optional argument is given before the first name, it will be
+% interpreted as the optional text, not as the optional prefix.)
+% \end{docsidebar}
+%    \begin{macrocode}
+\NewDocumentCommand{\captionartist}{s o m O{} O{} m m O{}}{%
+%    \end{macrocode}
+% Print the artist's name next to the figure:
+%    \begin{macrocode}
+\par\tocdatafigprint{#5}{#6}{#7}{#8}
+%    \end{macrocode}
+% If supplemental text is provided, print it below the author:
+%    \begin{macrocode}
+\ifblank{#4}{}{\par\tocdatafigtextprint{#4}}
+%    \end{macrocode}
+% If starred, there should be no \acro{TOC} entry, so do not add tocdata.
+% Use \cs{caption*} from the \pkg{caption} or similar packages.
+%    \begin{macrocode}
+\IfBooleanTF{#1}%
+{% starred
+\IfValueTF{#2}{\caption*[#2]{#3}}{\caption*{#3}}%
+}%
+{% no starred
+%    \end{macrocode}
+% No starred, so remember the artist's name for inclusion in the \acro{LOF}:
+%    \begin{macrocode}
+\tocdata{lof}{#6 #7}%
+%    \end{macrocode}
+% Create the caption depending on the optional name:
+%    \begin{macrocode}
+\IfValueTF{#2}{\caption[#2]{#3}}{\caption{#3}}%
+}
+%    \end{macrocode}
+% Create an index entry depending on whether there is a first name:
+%    \begin{macrocode}
+\ifblank{#6}%
+{\index{#7}}%
+{\index{#7, #6}}%
+}
+%    \end{macrocode}
+% \end{macro}
+%
+% \begin{figure}[hbp]
+% \setlength{\fboxsep}{0pt}
+% \centering
+% \fbox{\includegraphics[width=4in]{lacquer_go_board.jpg}}
+% \captionartist{Lacquer Go Board}[From the series, \textit{Uma Zukushi}.]{Katsushika}{Hokusai}
+% \end{figure}
+%
+%
+%
+%
+% ^^A At end:
+%
+% \clearpage
+% ^^A \pagestyle{plain}
+% \phantomsection
+% \tocdata{toc}{Automated}
+% \addcontentsline{toc}{section}{Change History and \indexname}
+%
+% \pagestyle{plain}
+%
+% \Finale
+\endinput
diff --git a/Master/texmf-dist/source/latex/tocdata/tocdata.ins b/Master/texmf-dist/source/latex/tocdata/tocdata.ins
new file mode 100644
index 00000000000..85a47ccc63e
--- /dev/null
+++ b/Master/texmf-dist/source/latex/tocdata/tocdata.ins
@@ -0,0 +1,46 @@
+%% tocdata.ins
+%% Copyright 2016 Brian Dunn
+%%
+%% This work may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either version 1.3
+%% of this license or (at your option) any later version.
+%% The latest version of this license is in
+%%   http://www.latex-project.org/lppl.txt
+%% and version 1.3 or later is part of all distributions of LaTeX
+%% version 2005/12/01 or later.
+%%
+%% This work has the LPPL maintenance status `maintained'.
+%% 
+%% The Current Maintainer of this work is Brian Dunn.
+%%
+%% This work consists of the files lwarp.dtx and lwarp.ins
+%% and the derived file lwarp.sty.
+\input docstrip.tex
+\keepsilent
+\usedir{tex/latex/ package }
+\preamble
+This is a generated file.
+Copyright 2016 Brian Dunn
+
+This work may be distributed and/or modified under the
+conditions of the LaTeX Project Public License, either version 1.3
+of this license or (at your option) any later version.
+The latest version of this license is in
+  http://www.latex-project.org/lppl.txt
+and version 1.3 or later is part of all distributions of LaTeX
+version 2005/12/01 or later.
+\endpreamble
+\generate{\file{tocdata.sty}{\from{tocdata.dtx}{package}}}
+\Msg{*********************************************************}
+\Msg{*}
+\Msg{* To finish the installation you have to move the}
+\Msg{* following file into a directory searched by TeX:}
+\Msg{*}
+\Msg{* \space\space tocdata.sty}
+\Msg{*}
+\Msg{* To produce the documentation run the file tocdata.dtx}
+\Msg{* through LaTeX.}
+\Msg{*}
+\Msg{* Happy TeXing!}
+\Msg{*********************************************************}
+\endbatchfile
diff --git a/Master/texmf-dist/tex/latex/tocdata/tocdata.sty b/Master/texmf-dist/tex/latex/tocdata/tocdata.sty
new file mode 100644
index 00000000000..97ac015d5e0
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/tocdata/tocdata.sty
@@ -0,0 +1,142 @@
+%%
+%% This is file `tocdata.sty',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% tocdata.dtx  (with options: `package')
+%% This is a generated file.
+%% Copyright 2016 Brian Dunn
+%% 
+%% This work may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either version 1.3
+%% of this license or (at your option) any later version.
+%% The latest version of this license is in
+%%   http://www.latex-project.org/lppl.txt
+%% and version 1.3 or later is part of all distributions of LaTeX
+%% version 2005/12/01 or later.
+\NeedsTeXFormat{LaTeX2e}[1999/12/01]
+\ProvidesPackage{tocdata}
+    [2016/07/11 v0.11 Adds author/artist to TOC entries.]
+
+
+
+\RequirePackage{xparse}
+\RequirePackage{etoolbox}
+
+\newcommand{\TD@thistocdata}{}
+
+\newcommand{\settocdata}[1]{\renewcommand{\TD@thistocdata}{#1}}
+
+\newcommand{\tocdata}[2]{%
+\@bsphack\addtocontents{#1}{\protect\settocdata{#2}}\@esphack%
+}
+\newcommand{\tocdatafont}[1]{{\normalfont\textit{\small#1}}}
+\newcommand{\TD@usetocdata}{%
+\tocdatafont{\TD@thistocdata}%
+\global\def\TD@thistocdata{}%
+}
+
+\@ifpackageloaded{titletoc}{
+
+\@ifundefined{chapter}
+{}
+{
+\titlecontents{chapter}[0em]{}{\contentslabel{2.5em}}{}{%
+\titlerule*[.75pc]{.}%
+\TD@usetocdata% <-- newly added for the tocdata package
+\contentspage}[\vspace{-.5ex}]
+}
+\titlecontents{section}[2.5em]{}{\contentslabel{2.5em}}{}{%
+\titlerule*[.75pc]{.}%
+\TD@usetocdata%
+\contentspage}[\vspace{-.5ex}]
+\titlecontents{figure}[0em]{}{\contentslabel{3em}}{}{%
+\titlerule*[1pc]{.}%
+\TD@usetocdata%
+\contentspage}[\vspace{-.5ex}]
+
+}% end of titletoc loaded
+{% titletoc is not loaded
+}% end of \@ifpackageloaded{titletoc}
+
+\@ifpackageloaded{tocloft}
+{
+\if@cfthaschapter
+\renewcommand{\cftchapleader}{\bfseries\cftdotfill{\cftchapdotsep}\TD@usetocdata}
+\renewcommand{\cftsecleader}{\normalfont\cftdotfill{\cftsecdotsep}\TD@usetocdata}
+\renewcommand{\cftfigleader}{\normalfont\cftdotfill{\cftfigdotsep}\TD@usetocdata}
+\else
+\renewcommand{\cftsecleader}{\bfseries\cftdotfill{\cftsecdotsep}\TD@usetocdata}
+\renewcommand{\cftfigleader}{\normalfont\cftdotfill{\cftfigdotsep}\TD@usetocdata}
+\fi
+}% end of tocloft patches
+{}% tocloft not loaded
+
+\@ifundefined{chapter}
+{}% if no chapters
+{% only of chapters exists in this documentclass:
+\newcommand{\tocdatachapprint}[4]
+{\newline\noindent{\normalfont\normalsize\textit{\hspace*{2em}--- #1 #2 #3#4}}}
+}% end of chapters-only
+\newcommand{\tocdatasecprint}[4]
+{\newline\noindent{\normalfont\normalsize\textit{\hspace*{2em}--- #1 #2 #3#4}}}
+\@ifundefined{chapter}
+{}% if no chapters
+{% only of chapters exists in this documentclass:
+\NewDocumentCommand{\chapterauthor}{s o m O{} m m O{}}{%
+\IfBooleanTF{#1}% star:
+{\chapter*{#3\tocdatachapprint{#4}{#5}{#6}{#7}}}
+{% no star:
+\tocdata{toc}{#5 #6}
+\IfValueTF{#2}
+{\chapter[#2]{#3\tocdatachapprint{#4}{#5}{#6}{#7}}}
+{\chapter[#3]{#3\tocdatachapprint{#4}{#5}{#6}{#7}}}
+}
+\ifblank{#5}
+{\index{#6}}
+{\index{#6, #5}}
+}% end of \chapterauthor
+}% end of \@ifundefined{chapter}
+
+\NewDocumentCommand{\sectionauthor}{s o m O{} m m O{}}{%
+\IfBooleanTF{#1}% star:
+{\section*{#3\tocdatasecprint{#4}{#5}{#6}{#7}}}
+{% no star:
+\tocdata{toc}{#5 #6}
+\IfValueTF{#2}
+{\section[#2]{#3\tocdatasecprint{#4}{#5}{#6}{#7}}}
+{\section[#3]{#3\tocdatasecprint{#4}{#5}{#6}{#7}}}
+}
+\ifblank{#5}
+{\index{#6}}
+{\index{#6, #5}}
+}
+
+\newcommand{\tocdatafigprint}[4]{%
+\addvspace{1ex}%
+{\centering\footnotesize\textsc{{#1 #2 #3#4}}\par}%
+}
+\newcommand{\tocdatafigtextprint}[1]{%
+\addvspace{1ex}%
+{\centering\footnotesize#1\par}%
+}
+
+\NewDocumentCommand{\captionartist}{s o m O{} O{} m m O{}}{%
+\par\tocdatafigprint{#5}{#6}{#7}{#8}
+\ifblank{#4}{}{\par\tocdatafigtextprint{#4}}
+\IfBooleanTF{#1}%
+{% starred
+\IfValueTF{#2}{\caption*[#2]{#3}}{\caption*{#3}}%
+}%
+{% no starred
+\tocdata{lof}{#6 #7}%
+\IfValueTF{#2}{\caption[#2]{#3}}{\caption{#3}}%
+}
+\ifblank{#6}%
+{\index{#7}}%
+{\index{#7, #6}}%
+}
+\endinput
+%%
+%% End of file `tocdata.sty'.
diff --git a/Master/tlpkg/bin/tlpkg-ctan-check b/Master/tlpkg/bin/tlpkg-ctan-check
index 21667fe9b95..4b50e578445 100755
--- a/Master/tlpkg/bin/tlpkg-ctan-check
+++ b/Master/tlpkg/bin/tlpkg-ctan-check
@@ -578,7 +578,7 @@ my @TLP_working = qw(
     tkz-base tkz-berge tkz-doc tkz-euclide tkz-fct tkz-graph
     tkz-kiviat tkz-linknodes tkz-orm tkz-tab
     tlc2
-    tocbibind tocloft tocvsec2 todo todonotes
+    tocbibind tocdata tocloft tocvsec2 todo todonotes
     tokenizer toolbox tools topfloat totcount totpages toptesi
     tpslifonts tqft
     tracklang trajan tram
diff --git a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
index 53de0ae5024..992dcdc91bc 100644
--- a/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
+++ b/Master/tlpkg/tlpsrc/collection-latexextra.tlpsrc
@@ -997,6 +997,7 @@ depend titleref
 depend titlesec
 depend titling
 depend tocbibind
+depend tocdata
 depend tocloft
 depend tocvsec2
 depend todo
diff --git a/Master/tlpkg/tlpsrc/tocdata.tlpsrc b/Master/tlpkg/tlpsrc/tocdata.tlpsrc
new file mode 100644
index 00000000000..e69de29bb2d
--- /dev/null
+++ b/Master/tlpkg/tlpsrc/tocdata.tlpsrc