13 files changed, 4855 insertions, 0 deletions
diff --git a/Master/texmf-dist/doc/latex/bullcntr/README b/Master/texmf-dist/doc/latex/bullcntr/README
new file mode 100644
index 00000000000..c648c943135
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/bullcntr/README
@@ -0,0 +1,56 @@
+The bullcntr package defines the command "\bullcntr", which can be thought
+of as an analogue of the "\fnsymbol" command: like the latter, it displays
+the value of a counter lying between 1 and 9, but uses, for the purpose, a
+regular pattern of bullets.  Approximately, these nine patterns of bullets
+are laid down as follows:
+
+
+                                *
+  *            *   *
+                              *   *
+  1              2              3
+
+
+
+  *            *   *           * *
+*   *            *            *   *
+  *            *   *           * *
+  4              5              6
+
+
+
+ * *           * * *          * * *
+* * *           * *           * * *
+ * *           * * *          * * *
+  7              8              9
+
+
+An ancillary package is included along with the bullcntr package: the
+bullenum package.  This is a "wrapper" that calls bullcntr and, in
+addition, defines a new environment, called "bullenum", that lets you
+create enumeration lists numbered via the "\bullcntr" command.
+
+I wrote this package as an amusing exercise during a boring afternoon in
+which I had nothing better to do!
+
+The bullcntr package may be distributed and/or modified under the
+conditions of the LaTeX Project Public License, available at
+    http://www.latex-project.org/lppl.txt
+See the files `00readme.txt' and `manifest.txt' for further details.
+
+For more information, read the following files:
+
+00readme.txt        --  start by reading this file
+bullcntr-man.pdf    --  general information on the bullcntr package (PDF)
+
+Other files that make up the distribution are:
+
+manifest.txt        --  legal stuff
+bullcntr.dtx        --  main source file
+bullcntr.ins        --  installation script
+bullcntr-man.tex    --  LaTeX source of `bullcntr-man.pdf'
+bullcntr-sam.tex    --  sample code that uses the bullcntr package
+bullenum-sam.tex    --  sample code that uses the bullenum package
+
+See the file `manifest.txt' for a more precise specification of what files
+constitutes a LPPL-compliant distribution.
diff --git a/Master/texmf-dist/doc/latex/bullcntr/bullcntr-man.pdf b/Master/texmf-dist/doc/latex/bullcntr/bullcntr-man.pdf
new file mode 100644
index 00000000000..0ebab7c5f2b
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/bullcntr/bullcntr-man.pdf
diff --git a/Master/texmf-dist/doc/latex/bullcntr/bullcntr-man.tex b/Master/texmf-dist/doc/latex/bullcntr/bullcntr-man.tex
new file mode 100644
index 00000000000..2231316639e
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/bullcntr/bullcntr-man.tex
@@ -0,0 +1,1610 @@
+%
+% Copyright (C) 2007 by Gustavo MEZZETTI <gustavo.mezzetti@istruzione.it>.
+%
+% This file is part of a work named "bullcntr package".
+%
+% The bullcntr package may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.3 of
+% this license or (at your option) any later version.
+% The latest version of this license is in
+%   http://www.latex-project.org/lppl.txt
+% and version 1.3 or later is part of all distributions of LaTeX
+% version 2005/12/01 or later.
+%
+% The bullcntr package has the LPPL maintenance status
+%   "author-maintained".
+%
+% The file `manifest.txt' that comes along with this file specifies what
+% the bullcntr package consists of; more precisely, it explains how the
+% locutions "Work" and "Compiled Work", used in the LaTeX Project Public
+% License, are to be interpreted in the case of this work.
+%
+% Note that the distribution of this file alone is "distribution of only
+% part of the Work" in the sense of the LaTeX Project Public License,
+% and should be avoided (see the LaTeX Project Public Licence for
+% details).
+%
+\documentclass[a4paper]{article}
+\usepackage{bullenum}
+\usepackage[bookmarksnumbered]{hyperref}
+
+\title{Overview\\of \tbull
+	\thanks{This document describes version \bullvers\ (\bulldate).
+		Copyright \copyright~2007 by G.~Mezzetti
+		(see page~\pageref{S:Copyright} for details).}}
+\author{G.~Mezzetti\\{\ttfamily\normalsize
+	gustavo.mezzetti@istruzione.it}}
+\date{April~2, 2007}
+
+\newcommand*{\bullvers}{0.04}
+\newcommand*{\bulldate}{2007/04/02}
+\newcommand*{\filename}{bullcntr-man.dtx}
+
+\DeclareRobustCommand*{\command}[1]{%
+	{\texorpdfstring{\normalfont\ttfamily \char\escapechar}{\pdfbslash}#1}%
+}
+\DeclareRobustCommand*{\packlass}[1]{%
+	{\texorpdfstring{\normalfont \sffamily}{}#1}%
+}
+\DeclareRobustCommand*{\meta}[1]{\mbox{\(\langle\textit{#1}\rangle\)}}
+\DeclareRobustCommand*{\filedir}[1]{{\normalfont\ttfamily #1}}
+\DeclareRobustCommand*{\env}[1]{\texttt{#1}}
+\DeclareRobustCommand*{\cnt}[1]{\texttt{#1}}
+\DeclareRobustCommand*{\opt}[1]{{\normalfont\ttfamily #1}}
+\newcommand*{\Bullcntr}{bullcntr}
+\newcommand*{\bull}{\packlass{\Bullcntr}}
+\newcommand*{\tbull}{the \bull\ package}
+\newcommand*{\Bullenum}{bullenum}
+\newcommand*{\benu}{\packlass{\Bullenum}}
+\newcommand*{\tbenu}{the \benu\ package}
+\newcommand*{\hreff}[1]{\href{#1}{\texttt{#1}}}
+\newcommand*{\Enumerat}{enumerate}
+\newcommand*{\beenv}{\env{\Bullenum}}
+\newcommand*{\enenv}{\env{\Enumerat}}
+
+\newcommand*{\pdfbslash}{}
+{\catcode`\|=0 |catcode`|\=12 |gdef|pdfbslash{\\}}
+
+\makeatletter
+\newcommand*\hyref[1]{% actually two arguments, <label> and <text>
+  \@ifundefined{r@#1}{% #1 is <label>
+    \G@refundefinedtrue % \protect seems superfluous in our context
+    \@latex@warning{Reference `#1' on page \thepage \space undefined}%
+    \@firstofone % returns <text> (removing braces)
+  }{%
+    \expandafter\@hyref\expandafter{\csname r@#1\endcsname}%
+  }%
+}
+\@ifdefinable\@hyref{\def\@hyref#1{%
+  \expandafter\@@hyref#1%
+}}
+\@ifdefinable\@@hyref{\def\@@hyref#1#2#3#4#5{%
+  \hyperlink{#4}% <text> follows and becomes the second argument
+}}
+\makeatother
+
+\hfuzz = 0pt
+\vfuzz = 0pt
+
+
+
+\begin{document}
+
+\maketitle
+
+\begin{abstract}
+	We describe a \LaTeX\ package which defines a new command, similar
+	to \verb|\fnsymbol|, for displaying the value of a counter: this
+	command typesets a number of bullets equal to the value of the
+	counter, in a nice arrangement.  The value of the counter must lie
+	between 1 and~9, inclusive.
+	
+	We also present an ancillary package which defines a new
+	environment, similar to \enenv, for creating lists of items
+	numbered in this way.
+\end{abstract}
+
+
+
+\tableofcontents
+
+
+
+\begingroup
+
+\setlength{\parskip}{\medskipamount}
+\setlength{\parindent}{0pt}
+
+\section*{Copyright notice}
+\label{S:Copyright}
+\vspace{-\parskip}
+
+Copyright \copyright~2007 by Gustavo \textsc{Mezzetti}.  All rights
+are reserved, except as noted below.
+
+This document has been produced by feeding to a \LaTeX\ typesetting
+engine the file \filedir{\filename}.  This file is part of a work
+named ``\bull\ package'', and may distributed and/or modified only as
+a part thereof.  Subsection~\ref{SS:License} on
+page~\pageref{SS:License} explains the conditions under which \tbull\
+may be distributed and/or modified.
+
+Permission is granted to make printed copies of this document, by any
+means (\emph{e.g.}, photocopying, direct printing from the electronic
+version, and so on).
+
+Note, though, that distribution of this document alone is
+``distribution of only part of the Work'' in the sense of the \LaTeX\
+Project Public License, and should be avoided: please distribute, in
+addition, the source file \filedir{\filename} together with all other
+files listed in \filedir{manifest.txt}, as explained as well in
+Subsection~\ref{SS:License} and in the file \filedir{manifest.txt}
+itself.
+
+\endgroup
+
+
+
+\clearpage
+\setcounter{secnumdepth}{0}
+
+\section{Introduction}
+\label{S:Intro}
+
+I can't remember exactly where the idea of this package arose from,
+but I am pretty sure that the first time I saw a list of items
+numbered with an increasing number of bullets was in certain
+handwritten notes about sheaves cohomology, may be a decade or so ago.
+Since then, I had repeatedly thought of writing a \LaTeX\ package to
+implement this kind of numbering, but I had never resolved to actually
+do so, until very recently, when I suddenly decided to sit down and
+% ( paren match
+write the code!~:-)
+
+Regrettably, I had to discover a major bug in the macros I had dashed
+off in such a haste, which required extensive (and more careful!)\
+redesign of the code.  I took this opportunity to thoroughly
+reorganize the package, making it easier, for the user, to switch from
+one style of bullets to another, and also adding an ancillary package
+that simplifies the creation of lists numbered with bullets.
+
+This document describes \tbull\ version \textbf{\bullvers}
+(\textbf{\bulldate}).
+
+
+
+\setcounter{secnumdepth}{3}
+
+\section{Installing \tbull}
+
+As usual for \LaTeX\ distributions, \tbull\ is distributed in the form
+of a \filedir{.dtx} file, namely \filedir{\Bullcntr.dtx}, and an
+accompanying \filedir{.ins} file, namely \filedir{\Bullcntr.ins}.
+
+
+
+\subsection{Installation}
+
+To install the package, run \LaTeX\ (or Plain \TeX) once on the file
+\filedir{\Bullcntr.ins}.  This will generate the following \LaTeX\
+input files:
+%
+\begin{quote}
+	\ttfamily
+	\Bullcntr.sty\\
+	\Bullenum.sty
+\end{quote}
+%
+To finish the installation, move them into a \LaTeX\ input directory.
+The above listing of the files you need to move is also displayed on
+the terminal at the end of the run of the file
+\filedir{\Bullcntr.ins}.  The documentation of your \TeX\ installation
+should tell you how to find the \LaTeX\ input directory/ies, and
+probably also how to create new \LaTeX\ input directories reserved to
+contain your private classes and packages.  If your \TeX\ installation
+offers you the chance of defining your private \LaTeX\ input
+directories, I recommend you exploit this possibility and place the
+generated files into such a directory.
+
+Please note that before using \tbull\ you must read the license (see
+Subsection~\ref{SS:License}) to see whether its terms are acceptable
+for you, especially for what concerns the lack of any warranty; if
+they are not, don't use it.
+
+
+
+\subsection{Documentation}
+
+To produce the documentation, run \LaTeX\ three times (for the table
+of contents to be correct) on the file \filedir{\Bullcntr.dtx}.  This
+won't produce the index and the change history, however: for those,
+you have to run \emph{MakeIndex} on the files \filedir{\Bullcntr.idx}
+and \filedir{\Bullcntr.glo}, produced during the last of the aforesaid
+three \LaTeX\ runs, with the styles \filedir{gind.ist} and
+\filedir{gglo.ist}, respectively (these styles are part of the
+standard \LaTeX\ distribution); then pass \filedir{\Bullcntr.dtx}
+through \LaTeX\ twice more.
+
+
+
+\subsection{License}
+\label{SS:License}
+
+The \bull\ package is \emph{not} in the public domain: its author,
+Gustavo \textsc{Mezzetti}, owns the copyright, and in general retains
+all the rights therein; but as a special exception, the author grants
+you the permissions indicated below.
+
+
+
+\subsubsection{Distribution and/or modification}
+
+The \bull\ package may be distributed and/or modified under the
+conditions of the \href{http://www.latex-project.org/lppl.txt}{\LaTeX\
+Project Public License}, either version~1.3 of this license or (at
+your option) any later version.  The latest version of this license is
+in
+%
+\begin{quote}
+	\hreff{http://www.latex-project.org/lppl.txt}
+\end{quote}
+%
+and version~1.3 or later is part of all distributions of \LaTeX\
+version 2005/12/01 or later.
+
+The \bull\ package has the LPPL maintenance status
+``author-maintained''.
+% Switching to the ``maintained'' status (which
+% is the status recommended by the \TeX\ community) is currently being
+% considered, but for now I still prefer to keep my tiny unfledged
+% % ( paren match
+% creation under my protecting wing\ldots~:-)\spacefactor=\sfcode`.
+% \space Leaving jokes apart, I'm waiting to see if other ``disastrous''
+% mistakes are still lurking in the code, and whether there is an
+% interest of the \LaTeX\ community into this silly package that
+% justifies maintaining it in a more efficient way.
+
+The file \filedir{manifest.txt} included in \tbull\ specifies what
+this package consists of; more precisely, it explains how the
+locutions ``Work'' and ``Compiled Work'', used in the \LaTeX\ Project
+Public License, are to be interpreted in the case of this work.
+
+
+
+\subsubsection{Use}
+
+The use of \tbull\ is unrestricted, provided that you accept the terms
+and conditions of the \LaTeX\ Project Public License and of the
+following subsection for what concerns the absence of any warranty.
+
+
+
+\subsubsection{No warranty}
+
+There is absolutely no warranty for \tbull.  The Copyright Holder
+provides \tbull\ ``as is'', without warranty of any kind, either
+expressed or implied, including, but not limited to, the implied
+warranties of merchantability and fitness for a particular purpose.
+The entire risk as to the quality and performance of \tbull\ is with
+you.  Should \tbull\ prove defective, you assume the cost of all
+necessary servicing, repair, or correction.
+
+In no event will The Copyright Holder, or any other party who may
+distribute and/or modify \tbull\ as permitted by the \LaTeX\ Project
+Public License, be liable to you for damages, including any general,
+special, incidental or consequential damages arising out of any use of
+\tbull\ or out of inability to use it (including, but not limited to,
+loss of data, data being rendered inaccurate, or losses sustained by
+anyone as a result of any failure of \tbull\ to operate with any other
+programs), even if The Copyright Holder or said other party has been
+advised of the possibility of such damages.
+
+
+
+\subsection{Your comments}
+
+If you have comments, suggestions, etc.\ about \tbull, please let me
+know them: I'll be happy to read what you think.  My e-mail address is
+indicated under the title of this document.  Please include the
+\emph{exact} phrase \verb*|bullcntr package| in the \emph{subject} of
+your message; otherwise, it could be thrown away by a mail filter.
+
+
+
+\section{Using \tbull}
+
+Version \bullvers\ of \tbull\ is a bit more elaborate than its
+predecessor: in addition to the
+\hyref{SS:bullcntr}{\command{\Bullcntr} main command} and to the
+\hyref{SS:Hooks}{hooks for the bullets}, it now features
+\hyref{SS:CntrInvo}{options} and \hyref{SS:BullStyl}{predefined bullet
+styles}.
+
+
+
+\subsection{Package invocation and options}
+\label{SS:CntrInvo}
+
+You load \tbull\ by means of the usual \verb|\usepackage| declaration:
+%
+\begin{flushleft}
+	\verb|\usepackage|\meta{options}\verb|{bullcntr}|
+\end{flushleft}
+%
+You may specify one of the following, mutually exclusive options,
+which affect the size (or the type) of the bullets used by
+\verb|\bullcntr| command:
+%
+\begin{description}
+%
+\item[\opt{largectrbull}]
+(Relatively) ``large'' bullets are used for all values from 1 to~9.
+This has exactly the same effect as a \verb|\largectrbull| global
+declaration (see Subsection~\ref{SS:BullStyl}).
+%
+\item[\opt{smallctrbull}]
+The opposite: ``small'' bullets are used for all values from 1 to~9.
+This has exactly the same effect as a \verb|\smallctrbull| global
+declaration (see Subsection~\ref{SS:BullStyl}).
+%
+\item[\opt{smartctrbull}]
+(Relatively) ``large'' bullets are used for values from 1 through~5
+(inclusive), while ``small'' ones are used for those greater than or
+equal to~6.  This has exactly the same effect as a
+\verb|\smartctrbull| global declaration (see
+Subsection~\ref{SS:BullStyl}).
+%
+\item[\opt{heartctrbull}]
+Hearts are used (instead of bullets) for all values from 1 to~9.  This
+has exactly the same effect as a \verb|\heartctrbull| global
+declaration (see Subsection~\ref{SS:BullStyl}).
+%
+\end{description}
+%
+If you don't specify any, the default option is \opt{smartctrbull}.
+
+
+
+
+\subsection{The \command{\Bullcntr} command}
+\label{SS:bullcntr}
+
+This is a command analogous to the \verb|\fnsymbol| command (see the
+\textsl{\LaTeX book} \cite[Subsection~C.8.4]{LaTeXbook}): you may use
+it directly in the text, as in
+%
+\begin{flushleft}
+	\ldots\texttt{the counter value displays as}\verb|~\bullcntr{|\meta{ctr}\verb|}|\ldots
+\end{flushleft}
+%
+(where \meta{ctr} is a counter name, defined with \verb|\newcounter|),
+or you may redefine the \verb|\the|\meta{ctr} command, as in
+%
+\begin{flushleft}
+	\verb|\renewcommand*{\the|\meta{ctr}\verb|}{\bullcntr{|\meta{ctr}\verb|}}|
+\end{flushleft}
+%
+By way of example, in the case of a counter named \cnt{myctr}, you
+would write
+%
+\begin{verbatim}
+The counter value displays as~\bullcntr{myctr}.
+\end{verbatim}
+%
+directly in the text, or the following to redefine the
+\verb|\themyctr| command:
+%
+\begin{verbatim}
+\renewcommand*{\themyctr}{\bullcntr{myctr}}
+\end{verbatim}
+%
+
+When \( \verb|\value{|\meta{ctr}\verb|}|=0 \), the command
+\verb|\bullcntr{|\meta{ctr}\verb|}| silently typesets nothing (not
+even a space); but when \( \verb|\value{|\meta{ctr}\verb|}|<0 \) or \(
+\verb|\value{|\meta{ctr}\verb|}|>9 \), an error is generated.
+
+
+
+\subsection{Hooks for the bullets}
+\label{SS:Hooks}
+
+The main task of \tbull\ is to calculate the position of the
+``bullets'' used to display the value of the given counter; but you
+are free to decide what characters are actually drawn in these
+positions: they need not necessarily be ``bullets''.  Indeed, two
+``hooks'' are provided in the package to define the actual characters
+employed, and the package simply invokes these hooks.
+
+If the value of the counter being displayed is less than~6 (less
+than~6 bullets need to be drawn), the \verb|\bullcntr| command invokes
+the \verb|\counterlargebullet| macro to draw each of them.  If you
+want, you should redefine this macro (using \verb|\renewcommand|) so
+that it generates a symbol suitable for arrangements in which the
+``bullets'' are relatively spaced out.  For example,
+%
+\begin{verbatim}
+\renewcommand*{\counterlargebullet}{\textbullet}
+\end{verbatim}
+%
+
+You don't \emph{need} to redefine this command: a convenient default
+definition is already set by \tbull\ itself.
+
+When, on the other hand, the value of the counter being displayed is
+greater than or equal to~6 (6~or more bullets need to be drawn), the
+\verb|\bullcntr| command calls the \verb|\countersmallbullet| macro.
+It is intended that this macro typesets a character suitable for
+situations in which the ``bullets'' have to be grouped in a compact
+cluster; typically, this means that a smaller ``bullet'' is used than
+the one typeset by \verb|\counterlargebullet|, although it is
+perfectly in order to use the same character in both situations.  If
+you want (but you don't \emph{need} to do this, since \tbull\ already
+defines this macro) you may change the definition with
+\verb|\renewcommand|, \emph{e.g.}:
+%
+\begin{verbatim}
+\renewcommand*{\countersmallbullet}{\textperiodcentered}
+\end{verbatim}
+%
+
+For both hooks, it is best to \verb|\protect| fragile commands that
+appear in the code used in their (re)definition.
+
+``Macho \TeX\ programmers'' may also use \verb|\def| instead of
+\verb|\renewcommand|; for example:
+%
+\begin{verbatim}
+\def\counterlargebullet{\textbullet}
+\def\countersmallbullet{\textperiodcentered}
+\end{verbatim}
+%
+(Actually, in a case like this, even \verb|\let| could be used.)
+
+
+
+\subsection{Predefined bullet styles}
+\label{SS:BullStyl}
+
+To spare you the nuisance of redefining the hooks mentioned in
+Subsection~\ref{SS:Hooks}, at least in normal situations, four
+``bullet styles'' are already predefined by \tbull, covering what the
+author believes are the most common cases.  You can switch to any of
+these predefined styles by means of the following four declarations.
+
+\begin{description}
+
+\item[\command{largectrbull}]
+This declaration causes (relatively) ``large'' bullets to be used for
+all values from 1 to~9.
+
+\item[\command{smallctrbull}]
+This declaration causes ``small'' bullets to be used for all values
+from 1 to~9.
+
+\item[\command{smartctrbull}]
+This declaration causes (relatively) ``large'' bullets to be used for
+values from 1 to~5 (inclusive), and ``small'' bullets for values equal
+to or above~6.
+
+\item[\command{heartctrbull}]
+This declaration causes little hearts (instead of bullets) to be used
+for all values from 1 to~9.
+
+\end{description}
+
+These are in all respects normal declarations, obeying to ordinary
+scoping rules.  The corresponding options described in
+Subsection~\ref{SS:CntrInvo} simply set the style at the outer
+(global, or document-wide) level.
+
+
+
+\subsection{Cross-references}
+\label{SS:CrossRef}
+
+Cross-references now work fine with the \verb|\bullcntr| command.  You
+may use \verb|\label| (preceded by \verb|\refstepcounter| if
+necessary) in the usual way to label, for example, an item in a list
+numbered via \verb|\bullcntr| (recall that \verb|\item| calls
+\verb|\refstepcounter| by itself), and elsewhere cross-reference that
+item with \verb|\ref|: the reference will be typeset correctly, using
+the same bullet style that was in effect at the spot where
+\verb|\label| (and not \verb|\ref|) was used.
+
+Examples of such cross-references are shown later, in
+Subsection~\ref{SS:CrossXmp}.
+
+
+
+\section{Using \tbenu}
+
+The \bull\ package was conceived for the purpose of imitating in print
+an unusual way of numbering items in a list, that the author saw in
+certain handwritten notes (see the \hyref{S:Intro}{Introduction}).
+With the \verb|\bullcntr| command at hand, this could be achieved
+simply by saying something like
+%
+\begin{verbatim}
+\begin{enumerate}
+    \renewcommand*{\theenumi}{\bullcntr{enumi}}
+    \renewcommand*{\labelenumi}{\theenumi}
+\end{verbatim}
+\begin{flushleft}
+	\texttt{\ \ \ \ }\meta{items}
+\end{flushleft}
+\begin{verbatim}
+\end{enumerate}
+\end{verbatim}
+%
+This, nonetheless, is not perfect, since it breaks if the \enenv\
+environment is moved inside another \enenv, because of the explicit
+mention of \verb|\theenumi| and of \verb|\labelenumi|.
+
+For this reason, and also to facilitate the use of the
+\verb|\bullcntr| command for numbering list items, a new package has
+been added to \tbull; this helper package, called \benu, simply
+defines the \beenv\ environment, a variation of \enenv\ that numbers
+its items using the \verb|\bullcntr| command.  Indeed,
+%
+\begin{verbatim}
+\begin{bullenum}
+\end{verbatim}
+\begin{flushleft}
+	\texttt{\ \ \ \ }\meta{items}
+\end{flushleft}
+\begin{verbatim}
+\end{bullenum}
+\end{verbatim}
+%
+is equivalent to
+\begin{flushleft}
+	\verb|\begin{enumerate}|\\
+	\verb|    \renewcommand*{\theenum|\meta{lvl}\verb|}{\bullcntr{enum|\meta{lvl}\verb|}}|\\
+	\verb|    \renewcommand*{\labelenum|\meta{lvl}\verb|}{\theenum|\meta{lvl}\verb|}|
+\end{flushleft}
+\begin{flushleft}
+	\texttt{\ \ \ \ }\meta{items}\\[\topsep]
+\end{flushleft}
+\begin{verbatim}
+\end{enumerate}
+\end{verbatim}
+%
+where \meta{lvl} is \texttt{i}, \texttt{ii}, \texttt{iii},
+or~\texttt{iv}, depending on the current level of the \enenv\
+environment.
+
+In other words, \beenv\ can be used in every place where \enenv\ can,
+and numbers its items with an increasing number of bullets, regardless
+of the definition of \verb|\theenum|\meta{lvl} and
+\verb|\labelenum|\meta{lvl}.  Of course, the environment must contain
+no more than 9~items.  Moreover, if you use \verb|\label| to set up a
+reference, subsequent \verb|\ref|'s will typeset the reference as a
+``bulletted'' number, using, for the ``bullets'', the character that
+was current at the time the \verb|\label| was encountered (in brief,
+they will do the right thing).
+
+Notice that you should \emph{not} load \tbull\ if you invoke \benu,
+because the latter calls the former.  As explained below, you may pass
+to \tbenu\ the options that you would require from \bull: the outer
+package will forward them to the inner one.  Actually, most users will
+just use \tbenu, and never call \bull\ directly.
+
+
+
+\subsection{Package invocation and options}
+\label{SS:EnumInvo}
+
+You invoke \tbenu\ with the usual \verb|\usepackage| declaration put
+in the preamble of your document.  In this declaration you may specify
+exactly the same options that you would pass to \tbull, with the same
+meaning (see Subsection~\ref{SS:CntrInvo}).  The \benu\ package then
+calls \bull\ for you, just passing on to it the options, if any, you
+asked for.
+
+% For example, if, when preparing a valentine, you want to use the
+% \beenv\ environment to create list numbered with hearts, you might
+% say
+% %
+% \begin{verbatim}
+% \usepackage[heartctrbull]{bullenum}
+% \end{verbatim}
+% %
+% at the beginning of your preamble.
+
+
+
+\subsection{The \beenv\ environment}
+\label{SS:EnumEnvi}
+
+This environment is syntactically analogous to \enenv, but numbers its
+items with an increasing number of bullets (using the \verb|\bullcntr|
+command).  You must include no more than 9~items in this environment.
+The style of the bullets is governed by the declarations described in
+Subsection~\ref{SS:BullStyl}, according to ordinary scoping rules.  A
+change local to the environment being employed can be obtained by
+enclosing the relevant declaration inside the environment itself; for
+example,
+%
+\begin{verbatim}
+\begin{bullenum}
+    \smallctrbull
+\end{verbatim}
+\begin{flushleft}
+	\texttt{\ \ \ \ }\meta{items}
+\end{flushleft}
+\begin{verbatim}
+\end{bullenum}
+\end{verbatim}
+%
+will use ``small'' bullets regardless of whatever style might have
+been in force outside the \beenv\ environment.
+
+\pagebreak[2]
+
+If you want finer control over the appearance of the ``bullets'', just
+redefine the hooks of Subsection~\ref{SS:Hooks}; doing this inside the
+environment itself will keep changes to the hooks local.  For example,
+you might say:
+%
+\begin{verbatim}
+\begin{bullenum}
+    \renewcommand*{\counterlargebullet}
+        {$\scriptscriptstyle \diamondsuit$}
+    \renewcommand*{\countersmallbullet}{\counterlargebullet}
+\end{verbatim}
+\begin{flushleft}
+	\texttt{\ \ \ \ }\meta{items}
+\end{flushleft}
+\begin{verbatim}
+\end{bullenum}
+\end{verbatim}
+%
+(yes, ``macho \TeX\ programmers'' may also use \verb|\def|, or
+\verb|\let| where appropriate).
+
+Of course, this environment respects the definitions of
+\verb|\theenum|\meta{lvl} and of \verb|\labelenum|\meta{lvl} in force
+outside the environment itself, for \( \meta{lvl} =
+\texttt{i},\ldots,\texttt{iv} \).
+
+
+
+\subsection{Nesting \beenv\ environments}
+\label{SS:Nesting}
+
+Because a \beenv\ environment is nothing more than a modified \enenv,
+it can be nested in the same way, up to four levels deep.
+
+For what concerns the syntax, it is perfectly in order to nest one
+\beenv\ environment inside another; it is from the viewpoint of the
+resulting visual appearance that this is not recommendable, unless
+quite different bullet styles are used for the two enumerations, so as
+to sharply mark the visual distinction between their respective
+labels.  Of course, this problem does not arise if you nest a \beenv\
+environment inside an \enenv, or viceversa.
+
+Examples of such nested environments will be presented in
+Subsection~\ref{SS:NestXmp}.
+
+
+
+\section{Examples}
+
+A few examples follow, illustrating the usage of the \bull\slash\benu\
+packages.
+
+
+
+\subsection{A sample list}
+
+Here we illustrate the use of the \beenv\ environment to produce lists
+whose items are numbered with the \verb|\bullcntr| command.
+
+The lists in the various examples are produced by the following source
+code:
+%
+\begin{verbatim}
+\begin{bullenum}
+\end{verbatim}
+\begin{flushleft}
+\texttt{\ \ \ \ }\meta{items}
+\end{flushleft}
+\begin{verbatim}
+\end{bullenum}
+\end{verbatim}
+%
+
+We shall now show a few variations of a list of the above kind,
+changing the definition of the commands \verb|\counterlargebullet| and
+\verb|\countersmallbullet| among the various examples, so as to
+illustrate the use of several bullet sizes.  In three examples out of
+five, however, this will be actually done by means of the declarations
+described in Subsection~\ref{SS:BullStyl}, thus falling back on one of
+the predefined bullet styles.
+
+
+
+\subsubsection{The standard sizes (\command{smartctrbull})}
+\label{SSS:Xmp-Standard}
+
+In our first example, actually, we do not alter the default
+definitions of the two hooks that typeset the bullets (see
+Subsection~\ref{SS:Hooks}).  The following is the output the
+\bull\slash\benu\ packages will produce by themselves, if you invoke
+either of them without options and do not alter the default bullet
+style; in any case, it corresponds to the style selected by
+\verb|\smartctrbull|.
+
+\begin{bullenum}
+	\item
+		This is the first item of the list, that is, item~\#1.  It is
+		therefore numbered with a single bullet.  Poor bullet!  How
+		lonely it must feel!
+
+	\item
+		This is the second item of the list, that is, item~\#2.  It is
+		therefore numbered with two bullets, one on the left and one
+		on the right.  If you are a romantic nature, you might even
+		think of them as Romeo and Juliet\ldots
+
+	\item\label{Standard-3}
+		This is the third item of the list, that is---guess
+		what?---item~\#3.  Not surprisingly, it is numbered with three
+		bullets neatly arranged in the shape of an equilateral
+		triangle.
+
+	\item
+		This is the fourth item, item~\#4.  A square has exactly four
+		vertices, so it seems quite appropriate to lay out the four
+		bullets that must be used to number this item exactly in this
+		form, as you can see in the label.
+
+	\item
+		If you have not lost the track, you will agree that this is
+		the fifth item of the list.  A regular pentagon would probably
+		have been the optimal choice for displaying this value of the
+		counter, but for some reason the arrangement shown in the
+		label of this item has been preferred by the author of \tbull.
+
+	\item\label{Standard-6}
+		Sixth item!  Item~\#6!  A regular hexagon is used here!  Note,
+		however, that the bullets have shrunk to a smaller size,
+		because the size used so far would have made the bullet
+		cluster look a bit too crowded.
+
+	\item
+		In the opinion of the author, the shape used to display the
+		value~7 is even more pleasant than the regular hexagon used
+		for the value~6; indeed, this is a regular hexagon too, but
+		with the center marked by an additional bullet, which makes
+		the figure look more symmetric.
+
+	\item
+		If 7~was the perfect number of bullets, here we face the
+		disruption of this perfection.  The solution adopted for
+		arranging 8~bullets, which you can see here, is, in the
+		author's opinion, the less inelegant among all possibilities.
+
+	\item
+		Item~\#9, the last value that the \verb|\bullcntr| command can
+		display.  The bullets are just stacked in a $3\times3$ square
+		pattern---the obvious choice!
+\end{bullenum}
+
+
+
+\subsubsection{Big bullets}
+\label{SSS:Xmp-Big}
+
+You might think that the \verb|\textbullet| character is fitter for
+labelling list items; this is probably true for item numbers that do
+not exceede three, but begins to become questionable for higher
+values.  In any case, here is an extreme example: \verb|\textbullets|
+is used for all values from 1 to~9.  To achieve this, the following
+source code should be used:
+%
+\begin{verbatim}
+\begin{bullenum}
+    \renewcommand*{\counterlargebullet}{\textbullet}
+    \renewcommand*{\countersmallbullet}{\textbullet}
+\end{verbatim}
+\begin{flushleft}
+	\texttt{\ \ \ \ }\meta{items}
+\end{flushleft}
+\begin{verbatim}
+\end{bullenum}
+\end{verbatim}
+%
+This is what we write below.
+
+\begin{bullenum}
+	\renewcommand*{\counterlargebullet}{\textbullet}
+	\renewcommand*{\countersmallbullet}{\textbullet}
+
+	\item
+		This is the first item of the list, that is, item~\#1.  It is
+		therefore numbered with a single bullet.  Poor bullet!  How
+		lonely it must feel!
+
+	\item\label{Big-2}
+		This is the second item of the list, that is, item~\#2.  It is
+		therefore numbered with two bullets, one on the left and one
+		on the right.  If you are a romantic nature, you might even
+		think of them as Romeo and Juliet\ldots
+
+	\item\label{Big-3}
+		This is the third item of the list, that is---guess
+		what?---item~\#3.  Not surprisingly, it is numbered with three
+		bullets neatly arranged in the shape of an equilateral
+		triangle.
+
+	\item
+		This is the fourth item, item~\#4.  A square has exactly four
+		vertices, so it seems quite appropriate to lay out the four
+		bullets that must be used to number this item exactly in this
+		form, as you can see in the label.
+
+	\item
+		If you have not lost the track, you will agree that this is
+		the fifth item of the list.  A regular pentagon would probably
+		have been the optimal choice for displaying this value of the
+		counter, but for some reason the arrangement shown in the
+		label of this item has been preferred by the author of \tbull.
+
+	\item\label{Big-6}
+		Sixth item!  Item~\#6!  A regular hexagon is used here!  Note,
+		this time, that the bullets have \emph{not} shrunk to a
+		smaller size, and that the resulting picture looks very
+		crowded---pretty awful, I~would say!
+
+	\item
+		In the opinion of the author, the shape used to display the
+		value~7 is even more pleasant than the regular hexagon used
+		for the value~6; indeed, this is a regular hexagon too, but
+		with the center marked by an additional bullet, which makes
+		the figure look more symmetric.
+
+	\item
+		If 7~was the perfect number of bullets, here we face the
+		disruption of this perfection.  The solution adopted for
+		arranging 8~bullets, which you can see here, is, in the
+		author's opinion, the less inelegant among all possibilities.
+
+	\item\label{Big-9}
+		Item~\#9, the last value that the \verb|\bullcntr| command can
+		display.  The bullets are just stacked in a $3\times3$ square
+		pattern---the obvious choice!
+\end{bullenum}
+
+A cross-reference to an item run into the main text may look really
+bad with bullets thus large: for instance, referencing the second item
+produces~\ref{Big-2} (quite acceptable), referencing the third one
+gives~\ref{Big-3} (just about acceptable), but a reference to the
+sixth item is typeset as~\ref{Big-6}, and the ninth one even
+yields~\ref{Big-9}!  Note, however, that lines are not spaced out any
+further than usual.
+
+
+
+\subsubsection{Moderately large bullets (\command{largectrbull})}
+\label{SSS:Xmp-Large}
+
+Our next example illustrates the output produced by the style selected
+with a \verb|\largectrbull| declaration; this style continues to use,
+for the values over~5, the same bullet size adopted for the first five
+values.  So, we say
+%
+\begin{verbatim}
+\begin{bullenum}
+    \largectrbull
+\end{verbatim}
+\begin{flushleft}
+	\texttt{\ \ \ \ }\meta{items}
+\end{flushleft}
+\begin{verbatim}
+\end{bullenum}
+\end{verbatim}
+%
+to produce the desired list.
+
+\begin{bullenum}
+	\largectrbull
+
+	\item
+		This is the first item of the list, that is, item~\#1.  It is
+		therefore numbered with a single bullet.  Poor bullet!  How
+		lonely it must feel!
+
+	\item
+		This is the second item of the list, that is, item~\#2.  It is
+		therefore numbered with two bullets, one on the left and one
+		on the right.  If you are a romantic nature, you might even
+		think of them as Romeo and Juliet\ldots
+
+	\item\label{Large-3}
+		This is the third item of the list, that is---guess
+		what?---item~\#3.  Not surprisingly, it is numbered with three
+		bullets neatly arranged in the shape of an equilateral
+		triangle.
+
+	\item
+		This is the fourth item, item~\#4.  A square has exactly four
+		vertices, so it seems quite appropriate to lay out the four
+		bullets that must be used to number this item exactly in this
+		form, as you can see in the label.
+
+	\item
+		If you have not lost the track, you will agree that this is
+		the fifth item of the list.  A regular pentagon would probably
+		have been the optimal choice for displaying this value of the
+		counter, but for some reason the arrangement shown in the
+		label of this item has been preferred by the author of \tbull.
+
+	\item\label{Large-6}
+		Sixth item!  Item~\#6!  A regular hexagon is used here!  Note,
+		once again, that the bullets have \emph{not} shrunk to a
+		smaller size, so that the resulting picture looks pretty
+		crowded, although not intolerably bad-looking.  Compare the
+		label of this item with a reference to the corresponding
+		item~\ref{Standard-6} under~\ref{SSS:Xmp-Standard}, and with a
+		reference to the corresponding item~\ref{Big-6}
+		under~\ref{SSS:Xmp-Big}.
+
+	\item
+		In the opinion of the author, the shape used to display the
+		value~7 is even more pleasant than the regular hexagon used
+		for the value~6; indeed, this is a regular hexagon too, but
+		with the center marked by an additional bullet, which makes
+		the figure look more symmetric.
+
+	\item
+		If 7~was the perfect number of bullets, here we face the
+		disruption of this perfection.  The solution adopted for
+		arranging 8~bullets, which you can see here, is, in the
+		author's opinion, the less inelegant among all possibilities.
+
+	\item
+		Item~\#9, the last value that the \verb|\bullcntr| command can
+		display.  The bullets are just stacked in a $3\times3$ square
+		pattern---the obvious choice!
+\end{bullenum}
+
+
+
+\subsubsection{Small bullets (\command{smallctrbull})}
+\label{SSS:Xmp-Small}
+
+The reciprocal example is to use small bullets throughout, from 1 to~9.
+Thus, we use the following source code:
+%
+\begin{verbatim}
+\begin{bullenum}
+    \smallctrbull
+\end{verbatim}
+\begin{flushleft}
+	\texttt{\ \ \ \ }\meta{items}
+\end{flushleft}
+\begin{verbatim}
+\end{bullenum}
+\end{verbatim}
+%
+And here is the output it yields.
+
+\begin{bullenum}
+	\smallctrbull
+
+	\item
+		This is the first item of the list, that is, item~\#1.  It is
+		therefore numbered with a single bullet.  Poor bullet!  How
+		lonely it must feel!
+
+	\item
+		This is the second item of the list, that is, item~\#2.  It is
+		therefore numbered with two bullets, one on the left and one
+		on the right.  If you are a romantic nature, you might even
+		think of them as Romeo and Juliet\ldots
+
+	\item\label{Small-3}
+		This is the third item of the list, that is---guess
+		what?---item~\#3.  Not surprisingly, it is numbered with three
+		bullets neatly arranged in the shape of an equilateral
+		triangle.
+
+	\item
+		This is the fourth item, item~\#4.  A square has exactly four
+		vertices, so it seems quite appropriate to lay out the four
+		bullets that must be used to number this item exactly in this
+		form, as you can see in the label.
+
+	\item
+		If you have not lost the track, you will agree that this is
+		the fifth item of the list.  A regular pentagon would probably
+		have been the optimal choice for displaying this value of the
+		counter, but for some reason the arrangement shown in the
+		label of this item has been preferred by the author of \tbull.
+
+	\item\label{Small-6}
+		Sixth item!  Item~\#6!  A regular hexagon is used here!  Note,
+		once more, that the bullets have \emph{not} shrunk to a
+		smaller size, because they were \emph{already} small in the
+		items shown thus far.
+
+	\item
+		In the opinion of the author, the shape used to display the
+		value~7 is even more pleasant than the regular hexagon used
+		for the value~6; indeed, this is a regular hexagon too, but
+		with the center marked by an additional bullet, which makes
+		the figure look more symmetric.
+
+	\item
+		If 7~was the perfect number of bullets, here we face the
+		disruption of this perfection.  The solution adopted for
+		arranging 8~bullets, which you can see here, is, in the
+		author's opinion, the less inelegant among all possibilities.
+
+	\item
+		Item~\#9, the last value that the \verb|\bullcntr| command can
+		display.  The bullets are just stacked in a $3\times3$ square
+		pattern---the obvious choice!
+\end{bullenum}
+
+Again, compare the references to items \#3 and~\#6 from different
+examples: standard bullets (\ref{Standard-3} and~\ref{Standard-6}),
+big bullets (\ref{Big-3} and~\ref{Big-6}), moderately large bullets
+(\ref{Large-3} and~\ref{Large-6}), small bullets (\ref{Small-3}
+and~\ref{Small-6}).
+
+
+
+\subsubsection{Tiny bullets}
+\label{SSS:Xmp-Tiny}
+
+We come now to another extreme example: the use of
+\verb|\textperiodcentered|.  In other words,
+%
+\begin{verbatim}
+\begin{bullenum}
+    \renewcommand*{\counterlargebullet}{\textperiodcentered}
+    \renewcommand*{\countersmallbullet}{\textperiodcentered}
+\end{verbatim}
+\begin{flushleft}
+	\texttt{\ \ \ \ }\meta{items}
+\end{flushleft}
+\begin{verbatim}
+\end{bullenum}
+\end{verbatim}
+%
+is asserted in order to produce the list.
+
+\begin{bullenum}
+	\renewcommand*{\counterlargebullet}{\textperiodcentered}
+	\renewcommand*{\countersmallbullet}{\textperiodcentered}
+
+	\item
+		This is the first item of the list, that is, item~\#1.  It is
+		therefore numbered with a single bullet.  Poor bullet!  How
+		lonely it must feel!
+
+	\item
+		This is the second item of the list, that is, item~\#2.  It is
+		therefore numbered with two bullets, one on the left and one
+		on the right.  If you are a romantic nature, you might even
+		think of them as Romeo and Juliet\ldots
+
+	\item
+		This is the third item of the list, that is---guess
+		what?---item~\#3.  Not surprisingly, it is numbered with three
+		bullets neatly arranged in the shape of an equilateral
+		triangle.
+
+	\item
+		This is the fourth item, item~\#4.  A square has exactly four
+		vertices, so it seems quite appropriate to lay out the four
+		bullets that must be used to number this item exactly in this
+		form, as you can see in the label.
+
+	\item
+		If you have not lost the track, you will agree that this is
+		the fifth item of the list.  A regular pentagon would probably
+		have been the optimal choice for displaying this value of the
+		counter, but for some reason the arrangement shown in the
+		label of this item has been preferred by the author of \tbull.
+
+	\item
+		Sixth item!  Item~\#6!  A regular hexagon is used here!  Note
+		that it was really impossible, this time, for the bullets to
+		shrunk to a still smaller size than the one that has been
+		adopted in the above items!
+
+	\item
+		In the opinion of the author, the shape used to display the
+		value~7 is even more pleasant than the regular hexagon used
+		for the value~6; indeed, this is a regular hexagon too, but
+		with the center marked by an additional bullet, which makes
+		the figure look more symmetric.
+
+	\item
+		If 7~was the perfect number of bullets, here we face the
+		disruption of this perfection.  The solution adopted for
+		arranging 8~bullets, which you can see here, is, in the
+		author's opinion, the less inelegant among all possibilities.
+
+	\item
+		Item~\#9, the last value that the \verb|\bullcntr| command can
+		display.  The bullets are just stacked in a $3\times3$ square
+		pattern---the obvious choice!
+\end{bullenum}
+
+This bullet style might be employed in a \beenv\ environment nested
+inside another one.
+
+
+
+\subsubsection{St.\texorpdfstring{\,}{ }Valentine (\command{heartctrbull})}
+\label{SSS:Xmp-Hearts}
+
+To end this inventory of variations, let us illustrate the use of a
+fancier ``bullet'': a little heart.  We obtain this by saying
+%
+\begin{verbatim}
+\begin{bullenum}
+    \heartctrbull
+\end{verbatim}
+\begin{flushleft}
+	\texttt{\ \ \ \ }\meta{items}
+\end{flushleft}
+\begin{verbatim}
+\end{bullenum}
+\end{verbatim}
+%
+% ( paren match
+This could be used in valentines to enumerate to your beloved the
+terms of your passion\ldots~:-)
+
+\begin{bullenum}
+	\heartctrbull
+
+	\item\label{Hearts-1}
+		This is the first item of the list, that is, item~\#1.  It is
+		therefore numbered with a single heart.  Poor heart!  It is a
+		true lonely heart!
+
+	\item
+		This is the second item of the list, that is, item~\#2.  It is
+		therefore numbered with two hearts, one on the left and one on
+		the right.  Thinking of Romeo and Juliet is absolutely natural
+		in this context\ldots
+
+	\item\label{Hearts-3}
+		This is the third item of the list, that is---guess
+		what?---item~\#3.  Not surprisingly, it is numbered with three
+		hearts neatly arranged in the shape of an equilateral
+		triangle.
+
+	\item\label{Hearts-4}
+		This is the fourth item, item~\#4.  A square has exactly four
+		vertices, so it seems quite appropriate to lay out the four
+		hearts that must be used to number this item exactly in this
+		form, as you can see in the label.
+
+	\item\label{Hearts-5}
+		If you have not lost the track, you will agree that this is
+		the fifth item of the list.  A regular pentagon would probably
+		have been the optimal choice for displaying this value of the
+		counter, but for some reason the arrangement shown in the
+		label of this item has been preferred by the author of \tbull.
+
+	\item
+		Sixth item!  Item~\#6!  A regular hexagon is used here,
+		adorned with hearts!  Of course, the hearts do not shrink, as
+		doesn't yours, and as doesn't your ardent passion!
+
+	\item\label{Hearts-7}
+		In the opinion of the author, the shape used to display the
+		value~7 is even more pleasant than the regular hexagon used
+		for the value~6; indeed, this is a regular hexagon too, but
+		with the center marked by an additional heart, which makes the
+		figure look more symmetric.
+
+	\item\label{Hearts-8}
+		If 7~was the perfect number of hearts, here we face the
+		disruption of this perfection.  The solution adopted for
+		arranging 8~hearts, which you can see here, is, in the
+		author's opinion, the less inelegant among all possibilities.
+
+	\item
+		Item~\#9, the last value that the \verb|\bullcntr| command can
+		display.  The hearts are just stacked in a $3\times3$ square
+		pattern---the obvious choice!
+\end{bullenum}
+
+Cross-references are a bit funny with this style; they look like this:
+\ref{Hearts-1}, \ref{Hearts-3}, \ref{Hearts-4}, \ref{Hearts-5},
+\ref{Hearts-7}, and~\ref{Hearts-8}.
+
+
+
+\subsection{Nested enumerations}
+\label{SS:NestXmp}
+
+Try not to overdo this: carrying it to excess could lead to confused
+output.
+
+
+
+\subsubsection{Nesting one \beenv\ inside another}
+\label{SSS:NestBullBull}
+
+We use ``large'' bullets for the outer environment, and ``tiny''
+bullets for the inner one.
+
+\begin{bullenum}
+	\largectrbull
+
+	\item
+		First item: let this one alone, just to have a term of
+		comparison.
+
+	\item\label{NestBull-2}
+		Second item.  Here we nest another \beenv\ environment:
+		\begin{bullenum}
+			\renewcommand*{\counterlargebullet}{\textperiodcentered}
+			\renewcommand*{\countersmallbullet}{\textperiodcentered}
+			\item\label{NestBull-2.1}
+				First sub-item.
+			\item\label{NestBull-2.2}
+				Second sub-item.
+			\item\label{NestBull-2.3}
+				Third sub-item.
+			\item\label{NestBull-2.4}
+				Fourth sub-item.  OK, this should suffice.
+		\end{bullenum}
+		Don't forget, we are still inside item~\ref{NestBull-2} of
+		the outer enumeration.
+
+	\item\label{NestBull-3}
+		Third item (of the outer enumeration).  Let us repeat exactly
+		the same nested enumeration as in item~\ref{NestBull-2}.
+		\begin{bullenum}
+			\renewcommand*{\counterlargebullet}{\textperiodcentered}
+			\renewcommand*{\countersmallbullet}{\textperiodcentered}
+			\item\label{NestBull-3.1}
+				First sub-item.
+			\item\label{NestBull-3.2}
+				Second sub-item.
+			\item\label{NestBull-3.3}
+				Third sub-item.
+			\item\label{NestBull-3.4}
+				Fourth sub-item.  OK, this should suffice.
+		\end{bullenum}
+		Back to item~\ref{NestBull-3} of the outer enumeration.
+\end{bullenum}
+
+Now the bad news: you might want to refer to, say, item
+\ref{NestBull-3.4} under item~\ref{NestBull-3}.  As you can see, the
+reference comes out wrong, since the label from the outer enumeration
+% ( paren match
+is typeset with the style of the inner one.~:-(\spacefactor=\sfcode`.
+\space This is a known bug: I\@ decided not to correct it, since doing
+so would require introducing the concept of bullet styles
+distinguished by level, which I\@ deem intolerably burdensome.  Be
+aware of this limitation when you nest \beenv\ environments inside one
+another (this does not apply, however, to \beenv's nested within
+\enenv's, as we'll see in the following examples).
+
+
+
+\subsubsection{Nesting \beenv\ inside \enenv}
+\label{SSS:NestBullEnum}
+
+Let us repeat \hyref{SSS:NestBullBull}{the same example shown above},
+but changing the outer environment to \enenv, and suppressing style
+variations.
+
+\begin{enumerate}
+	\item
+		First item: let this one alone, just to have a term of
+		comparison.
+
+	\item\label{NestBuEn-2}
+		Second item.  Here we nest a \beenv\ environment:
+		\begin{bullenum}
+			\item\label{NestBuEn-2.1}
+				First sub-item.
+			\item\label{NestBuEn-2.2}
+				Second sub-item.
+			\item\label{NestBuEn-2.3}
+				Third sub-item.
+			\item\label{NestBuEn-2.4}
+				Fourth sub-item.  OK, this should suffice.
+		\end{bullenum}
+		Don't forget, we are still inside item~\ref{NestBuEn-2} of
+		the outer enumeration.
+
+	\item\label{NestBuEn-3}
+		Third item (of the outer enumeration).  Let us repeat exactly
+		the same nested enumeration as in item~\ref{NestBuEn-2}.
+		\begin{bullenum}
+			\item\label{NestBuEn-3.1}
+				First sub-item.
+			\item\label{NestBuEn-3.2}
+				Second sub-item.
+			\item\label{NestBuEn-3.3}
+				Third sub-item.
+			\item\label{NestBuEn-3.4}
+				Fourth sub-item.  OK, this should suffice.
+		\end{bullenum}
+		Back to item~\ref{NestBuEn-3} of the outer enumeration.
+\end{enumerate}
+
+See Subsection~\ref{SS:CrossXmp} for examples of cross-references to
+the items of these lists.
+
+
+
+\subsubsection{Nesting \enenv\ inside \beenv}
+\label{SSS:NestEnumBull}
+
+As \hyref{SSS:NestBullEnum}{before}, but the other way around: \beenv\
+is now the outer environment, and \enenv\ the inner one.
+
+\begin{bullenum}
+	\item
+		First item: let this one alone, just to have a term of
+		comparison.
+
+	\item\label{NestEnBu-2}
+		Second item.  Here we nest an \enenv\ environment:
+		\begin{enumerate}
+			\item\label{NestEnBu-2.1}
+				First sub-item.
+			\item\label{NestEnBu-2.2}
+				Second sub-item.
+			\item\label{NestEnBu-2.3}
+				Third sub-item.
+			\item\label{NestEnBu-2.4}
+				Fourth sub-item.  OK, this should suffice.
+		\end{enumerate}
+		Don't forget, we are still inside item~\ref{NestEnBu-2} of
+		the outer enumeration.
+
+	\item\label{NestEnBu-3}
+		Third item (of the outer enumeration).  Let us repeat exactly
+		the same nested enumeration as in item~\ref{NestEnBu-2}.
+		\begin{enumerate}
+			\item\label{NestEnBu-3.1}
+				First sub-item.
+			\item\label{NestEnBu-3.2}
+				Second sub-item.
+			\item\label{NestEnBu-3.3}
+				Third sub-item.
+			\item\label{NestEnBu-3.4}
+				Fourth sub-item.  OK, this should suffice.
+		\end{enumerate}
+		Back to item~\ref{NestEnBu-3} of the outer enumeration.
+\end{bullenum}
+
+Again, see Subsection~\ref{SS:CrossXmp} for examples of
+cross-references to the items of the above lists.
+
+
+
+\subsubsection{Deep nesting}
+\label{SSS:DeepNest}
+
+Just to show what the output looks like, here is an example of \enenv\
+and \beenv\ environments nested down to the fourth level.  We avoid,
+however, nesting \beenv\ environments one inside the other, because of
+the problem with cross-references outlined
+under~\ref{SSS:NestBullBull}.
+
+\begin{enumerate}
+	\item\label{Invertebrates}
+		Invertebrates are of many kinds.
+
+	\item\label{Vertebrates}
+		We detail the vertebrates.
+		\begin{enumerate}
+			\item\label{Fishes}
+				Fishes.  They include, for instance:
+				\begin{bullenum}
+					\item\label{Barracuda}  barracuda;
+					\item\label{Carp}  carp;
+					\item\label{Swordfish}  swordfish.
+				\end{bullenum}
+			\item\label{Amphibians}
+				Amphibians.  They include, for instance:
+				\begin{bullenum}
+					\item\label{Frogs}  frogs, among which are
+						\begin{enumerate}
+							\item\label{BarkingFrog}  the barking frog,
+							\item\label{FlyingFrog}  the flying frog,
+							\item\label{GreenFrog}  the green frog,
+							\item\label{TreeFrog}  the tree frog,
+						\end{enumerate}
+						and may others;
+					\item\label{Toads}  toads, that comprise
+						\begin{enumerate}
+							\item\label{CaneToad}  the cane toad,
+							\item\label{GiantToad}  the giant toad,
+						\end{enumerate}
+						just to name a few;
+					\item\label{Salamanders}  salamanders, \emph{e.g.},
+						\begin{enumerate}
+							\item\label{GreenSal}  the green salamander,
+							\item\label{SlimySal}  the slimy salamander,
+							\item\label{TigerSal}  the tiger salamander.
+						\end{enumerate}
+				\end{bullenum}
+			\item\label{Reptiles}
+				Reptiles. Among these we find:
+				\begin{bullenum}
+					\item\label{Snakes}  snakes, for instance
+						\begin{enumerate}
+							\item\label{Cobra}  cobra,
+							\item\label{Python}  python,
+							\item\label{Anaconda}  anaconda,
+							\item\label{Viper}  viper,
+							\item\label{Rattlesnake}  rattlesnake;
+						\end{enumerate}
+					\item\label{Turtles}  turtles, of which the following
+						\begin{enumerate}
+							\item\label{GreenTurtle}  green turtle,
+							\item\label{PaintedTurtle}  painted turtle,
+							\item\label{SnappingTurtle}  snapping turtle
+						\end{enumerate}
+						are just a few examples.
+				\end{bullenum}
+			\item\label{Birds}
+				Birds.  (I'm a bit bored, now.)
+			\item\label{Mammals}
+				Mammals.
+		\end{enumerate}
+\end{enumerate}
+
+
+
+\subsection{An example of use in the middle of text}
+
+\newcounter{mytest}
+\setcounter{mytest}{3}
+\newlength{\W}
+\setlength{\W}{\bigskipamount}
+
+We have just defined, in the source file of this document, a new
+counter named \cnt{mytest}, and we have set the value of the
+\cnt{mytest} counter to~\arabic{mytest}.  With the default bullet
+sizes, this value is displayed by the command \verb|\bullcntr{mytest}|
+as~\bullcntr{mytest}.  Other examples:
+
+\begin{tabbing}
+	\indent\verb|\footnotesize \bullcntr{mytest}|\hspace{2\tabbingsep}\=\kill
+	\> \verb|\Huge \bullcntr{mytest}|
+		\' {\Huge produces~\bullcntr{mytest}}  \\[\W]
+	\> \verb|\huge \bullcntr{mytest}|
+		\' {\huge produces~\bullcntr{mytest}}  \\[\W]
+	\> \verb|\LARGE \bullcntr{mytest}|
+		\' {\LARGE produces~\bullcntr{mytest}}  \\[\W]
+	\> \verb|\Large \bullcntr{mytest}|
+		\' {\Large produces~\bullcntr{mytest}}  \\[\W]
+	\> \verb|\large \bullcntr{mytest}|
+		\' {\large produces~\bullcntr{mytest}}  \\[\W]
+	\> \verb|\normalsize \bullcntr{mytest}|
+		\' {\normalsize produces~\bullcntr{mytest}}  \\[\W]
+	\> \verb|\small \bullcntr{mytest}|
+		\' {\small produces~\bullcntr{mytest}}  \\[\W]
+	\> \verb|\footnotesize \bullcntr{mytest}|
+		\' {\footnotesize produces~\bullcntr{mytest}}  \\[\W]
+	\> \verb|\scriptsize \bullcntr{mytest}|
+		\' {\scriptsize produces~\bullcntr{mytest}}  \\[\W]
+	\> \verb|\tiny \bullcntr{mytest}|
+		\' {\tiny produces~\bullcntr{mytest}}
+\end{tabbing}
+
+\setcounter{mytest}{7}
+
+Let us repeat this example after assigning to the \cnt{mytest} counter
+the value~\arabic{mytest}, which \verb|\bullcntr{mytest}| displays
+as~\bullcntr{mytest}:
+
+\begin{tabbing}
+	\indent\verb|\footnotesize \bullcntr{mytest}|\hspace{2\tabbingsep}\=\kill
+	\> \verb|\Huge \bullcntr{mytest}|
+		\' {\Huge produces~\bullcntr{mytest}}  \\[\W]
+	\> \verb|\huge \bullcntr{mytest}|
+		\' {\huge produces~\bullcntr{mytest}}  \\[\W]
+	\> \verb|\LARGE \bullcntr{mytest}|
+		\' {\LARGE produces~\bullcntr{mytest}}  \\[\W]
+	\> \verb|\Large \bullcntr{mytest}|
+		\' {\Large produces~\bullcntr{mytest}}  \\[\W]
+	\> \verb|\large \bullcntr{mytest}|
+		\' {\large produces~\bullcntr{mytest}}  \\[\W]
+	\> \verb|\normalsize \bullcntr{mytest}|
+		\' {\normalsize produces~\bullcntr{mytest}}  \\[\W]
+	\> \verb|\small \bullcntr{mytest}|
+		\' {\small produces~\bullcntr{mytest}}  \\[\W]
+	\> \verb|\footnotesize \bullcntr{mytest}|
+		\' {\footnotesize produces~\bullcntr{mytest}}  \\[\W]
+	\> \verb|\scriptsize \bullcntr{mytest}|
+		\' {\scriptsize produces~\bullcntr{mytest}}  \\[\W]
+	\> \verb|\tiny \bullcntr{mytest}|
+		\' {\tiny produces~\bullcntr{mytest} (Ugh!)}
+\end{tabbing}
+
+But look at the output of
+%
+\begin{verbatim}
+\begin{quote}
+    \renewcommand*{\countersmallbullet}{\textperiodcentered}
+    \tiny
+    The value is~\bullcntr{mytest}.
+\end{quote}
+\end{verbatim}
+%
+Here it is:
+%
+\begin{quote}
+    \renewcommand*{\countersmallbullet}{\textperiodcentered}
+    \tiny
+    The value is~\bullcntr{mytest}.
+\end{quote}
+%
+% ( paren match
+How cute it looks!~:-)
+
+
+
+\subsection{Examples of cross-references}
+\label{SS:CrossXmp}
+
+Cross-references are printed using the bullet style that was in
+effect when the \verb|\label| command was given.  The following
+examples illustrate this.
+
+In~\ref{SSS:Xmp-Standard} we had references to~\ref{Standard-3} and
+to~\ref{Standard-6}.  In~\ref{SSS:Xmp-Hearts}, on the other hand, the
+references were to~\ref{Hearts-1}, to~\ref{Hearts-3},
+to~\ref{Hearts-4}, to~\ref{Hearts-5}, to~\ref{Hearts-7}, and
+to~\ref{Hearts-8}.
+
+We turn now to nested lists.  We let alone the example
+of~\ref{SSS:NestBullBull}, we already know that references come out
+wrong in this case.  In~\ref{SSS:NestBullEnum} we had items
+\ref{NestBuEn-2.1}, \ref{NestBuEn-2.2}, \ref{NestBuEn-2.3}, and
+\ref{NestBuEn-2.4}, all listed under item~\ref{NestBuEn-2}, and
+similarly items \ref{NestBuEn-3.1}, \ref{NestBuEn-3.2},
+\ref{NestBuEn-3.3}, and \ref{NestBuEn-3.4}, as part of
+item~\ref{NestBuEn-3}.  In~\ref{SSS:NestEnumBull}, on the other hand,
+we had items \ref{NestEnBu-2.1}, \ref{NestEnBu-2.2},
+\ref{NestEnBu-2.3}, and \ref{NestEnBu-2.4}, all listed under
+item~\ref{NestEnBu-2}: as you can see, the bullets now precede the
+reference to the item of \enenv; similarly, items \ref{NestEnBu-3.1},
+\ref{NestEnBu-3.2}, \ref{NestEnBu-3.3}, and \ref{NestEnBu-3.4} are now
+a part of the ``bulletted'' item~\ref{NestEnBu-3}.
+
+Coming to~\ref{SSS:DeepNest} (the animal kingdom), we see that, for
+instance, the green frog is \ref{GreenFrog}, an example of frog (under
+\ref{Frogs}), which, in turn, is an example of amphibian
+(see~\ref{Amphibians}).  On the other hand, the tiger salamander is a
+kind of salamander (cf.~\ref{Salamanders}) listed under
+\ref{TigerSal}.
+
+And so on\ldots
+
+
+
+\setcounter{secnumdepth}{0}
+
+\begin{thebibliography}{9}
+	\providecommand*{\bysame}{\leavevmode\hbox to3em{\hrulefill}\thinspace}
+	\addcontentsline{toc}{section}{\refname}
+
+	\bibitem{LaTeXbook}
+		L.~Lamport, \emph{\LaTeX---A Document Preparation
+		System---User's Guide and Reference Manual}, 2nd~edition,
+		Addison-Wesley, Reading, 1994.
+
+\end{thebibliography}
+
+\end{document}
diff --git a/Master/texmf-dist/doc/latex/bullcntr/bullcntr-sam.tex b/Master/texmf-dist/doc/latex/bullcntr/bullcntr-sam.tex
new file mode 100644
index 00000000000..58eedfeb897
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/bullcntr/bullcntr-sam.tex
@@ -0,0 +1,310 @@
+%
+% Copyright (C) 2007 by Gustavo MEZZETTI <gustavo.mezzetti@istruzione.it>.
+%
+% This file is part of a work named "bullcntr package".
+%
+% The bullcntr package may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.3 of
+% this license or (at your option) any later version.
+% The latest version of this license is in
+%   http://www.latex-project.org/lppl.txt
+% and version 1.3 or later is part of all distributions of LaTeX
+% version 2005/12/01 or later.
+%
+% The bullcntr package has the LPPL maintenance status
+%   "author-maintained".
+%
+% The file `manifest.txt' that comes along with this file specifies what
+% the bullcntr package consists of; more precisely, it explains how the
+% locutions "Work" and "Compiled Work", used in the LaTeX Project Public
+% License, are to be interpreted in the case of this work.
+%
+% Note that the distribution of this file alone is "distribution of only
+% part of the Work" in the sense of the LaTeX Project Public License,
+% and should be avoided (see the LaTeX Project Public Licence for
+% details).
+%
+\documentclass[a4paper]{article}
+% Non-metric paper sizes have no right to exist! (;-)
+\usepackage{bullcntr}
+% Of course, there is no need to load the hyperref package, but we
+% like to use it:
+\usepackage[bookmarksnumbered]{hyperref}
+
+\title{Using \tbull:\\an example}
+\author{G.~Mezzetti}
+\date{April~2, 2007}
+
+% The following command definitions has nothing to do with the
+% bullcntr package: you may ignore them.
+
+\DeclareRobustCommand*{\command}[1]{%
+	{\texorpdfstring{\normalfont\ttfamily \char\escapechar}{\pdfbslash}#1}%
+}
+\DeclareRobustCommand*{\packlass}[1]{%
+	{\texorpdfstring{\normalfont \sffamily}{}#1}%
+}
+\DeclareRobustCommand*{\meta}[1]{%
+	\texorpdfstring
+		{\mbox{\normalfont \(\langle\textit{#1}\rangle\)}}%
+		{<#1>}%
+}
+\DeclareRobustCommand*{\filedir}[1]{{\normalfont\ttfamily #1}}
+\DeclareRobustCommand*{\cnt}[1]{\texttt{#1}}
+\newcommand*{\Bullcntr}{bullcntr}
+\newcommand*{\bull}{\packlass{\Bullcntr}}
+\newcommand*{\tbull}{the \bull\ package}
+\newcommand*{\Bullenum}{bullenum}
+\newcommand*{\benu}{\packlass{\Bullenum}}
+\newcommand*{\tbenu}{the \benu\ package}
+
+\newcommand*{\pdfbslash}{}
+{\catcode`\|=0 |catcode`|\=12 |gdef|pdfbslash{\\}}
+
+% End of command definitions.
+
+% The following is just a neurotic symptom of the author:
+\hfuzz = 0pt
+\vfuzz = 0pt
+
+
+
+\begin{document}
+
+\maketitle
+
+\begin{abstract}
+	This document illustrates, by means of practical examples, the use
+	of \tbull.  You should read the \LaTeX\ source of this document
+	and compare it with the output it produces; you may also find it
+	useful as a starting base for your own coding.
+\end{abstract}
+
+\tableofcontents
+
+
+
+\setcounter{secnumdepth}{0}
+
+\section{Introduction}
+
+If you are reading this document, you will probably know what \tbull\
+is and what purpose it fulfills.  In the sequel, we shall assume no
+other knowledge about \tbull\ besides this; in particular, we assume
+that you did not bother reading the documentation, and prefer to learn
+how to use this package by looking at some sample code.  We also take
+for granted that you are reading the \LaTeX\ source of this document,
+and comparing it with the output it produces.
+
+Actually, you might quite well avoid reading this document too: the
+typical user of \tbull\ just wishes to produce enumeration lists whose
+items are numbered with bullets, and in order to learn quickly how to
+do this, it suffices to look at the examples contained
+in~\cite{enum-sam}.
+
+
+
+\setcounter{secnumdepth}{3}
+
+\section{Basic usage}
+
+\newcounter{mycntr}
+
+If you are reading the \LaTeX\ source, you will see that we have just
+defined a new counter named \cnt{mycntr}.  We use this counter for
+the examples below.
+
+
+
+\subsection{Using the \command{\Bullcntr} command directly}
+
+Since it has just been defined, the \cnt{mycntr} counter has presently
+the value~\arabic{mycntr}, which \tbull\footnote{More precisely,
+version 0.04\ (2007/04/02), or later, of \tbull: version 0.03
+incorrectly displayed a spurious bullet in this case.} displays
+as~``\bullcntr{mycntr}'', that is, as nothing at all.
+\refstepcounter{mycntr}\label{mycntr-1}After a \verb|\refstepcounter|,
+the value has become~\arabic{mycntr}, which, in ``bulletted'' form, is
+shown as~``\bullcntr{mycntr}''.  We may also refer to the
+value~\ref{mycntr-1} on page~\pageref{mycntr-1}: since we have not
+changed the definition of \verb|\themycntr|, the reference is printed
+as shown.
+
+Bear in mind that the \verb|\bullcntr| command works only if the value
+of the counter you want to display lies between 0 and~9 (inclusive);
+otherwise, an error is generated.
+
+
+
+\subsection{Redefining the \command{the}\meta{ctr} command}
+
+\renewcommand*{\themycntr}{\bullcntr{mycntr}}
+
+After redefining \verb|\themycntr|, we may say that the value of the
+\cnt{mycntr} counter is~\themycntr.
+\refstepcounter{mycntr}\label{mycntr-2}As above, after a
+\verb|\refstepcounter|, the value has become~\themycntr, but this time
+a reference is typeset as~``\ref{mycntr-2}'' too (on
+page~\pageref{mycntr-2}, why not).
+
+
+
+\subsection{Changing the bullet style}
+
+\heartctrbull
+
+Now the value of the counter is displayed as~``\themycntr'', but the
+previous reference is still typeset as~``\ref{mycntr-2}''.
+\refstepcounter{mycntr}\label{mycntr-3}You need another
+\verb|\refstepcounter|, issued after changing the style, to get a
+reference to the value~\ref{mycntr-3} on page~\pageref{mycntr-3}.
+This is in no way a bug, but really a feature!  (Could it ever be the
+other way around?)
+
+\smartctrbull
+
+We have now reverted to the default style: indeed, the value of the
+counter is displayed as~``\themycntr'', but, of course, the reference
+is still to~\ref{mycntr-3}.
+
+\renewcommand*{\counterlargebullet}{$\scriptstyle \star$}
+
+You are not limited to the provided predefined bullet styles (there
+are four of them): you may pick any character you want---for example,
+a star---and use it in place of the default bullet, as
+in~``\themycntr''; but for this, you should better read the
+documentation\ldots
+
+
+
+\section{Simple enumerations}
+
+It is possible to employ \tbull\ alone to produce lists whose items
+are numbered with bullets, in simple situations, although there is
+little point in doing this, since it is easier to use \tbenu\
+(see~\cite{enum-sam}), which also works in more complex contexts.  In
+any case, here are some examples.
+
+% Restore the default bullet style:
+\smartctrbull
+
+
+
+\subsection{The default style}
+
+If you don't alter the bullet style, you will get an enumeration like
+the following:
+
+\begin{enumerate}
+	\renewcommand*{\theenumi}{\bullcntr{enumi}}
+	\renewcommand*{\labelenumi}{\theenumi}
+	
+	\item\label{enum-1}  One bullet.
+	\item\label{enum-2}  Two bullets.
+	\item\label{enum-3}  Three bullets.
+	\item\label{enum-4}  Four bullets.
+	\item\label{enum-5}  Five bullets.
+	\item\label{enum-6}  Six bullets.  From six bullets onward,
+		the default settings provide that smaller bullets be used to
+		make up the arrangement.
+	\item\label{enum-7}  Seven bullets.
+	\item\label{enum-8}  And so on\ldots
+\end{enumerate}
+
+The references are to items \ref{enum-1}, \ref{enum-2}, \ref{enum-3},
+\ref{enum-4}, \ref{enum-5}, \ref{enum-6}, \ref{enum-7},
+and~\ref{enum-8}.
+
+
+
+\subsection{Larger bullets}
+
+You might prefer that the bullet size don't shrink when the value~6
+is reached, as in the following example.
+
+\begin{enumerate}
+	\renewcommand*{\theenumi}{\bullcntr{enumi}}
+	\renewcommand*{\labelenumi}{\theenumi}
+	\largectrbull
+	
+	\item  One bullet.
+	\item  Two bullets.
+	\item  Three bullets.
+	\item  Four bullets.
+	\item  Five bullets.
+	\item  Six bullets.  As you can see, the bullets have not shrunk.
+	\item  Seven bullets.
+	\item  And so on\ldots
+\end{enumerate}
+
+
+
+\subsection{Smaller bullets}
+
+Another possibility is to use small bullets since the beginning, as in
+the following example.
+
+\begin{enumerate}
+	\renewcommand*{\theenumi}{\bullcntr{enumi}}
+	\renewcommand*{\labelenumi}{\theenumi}
+	\smallctrbull
+	
+	\item  One bullet.  As you can see, the bullet is already small.
+	\item  Two bullets.
+	\item  Three bullets.
+	\item  Four bullets.
+	\item  Five bullets.
+	\item  Six bullets.
+	\item  Seven bullets.
+	\item  And so on\ldots
+\end{enumerate}
+
+
+
+\subsection{Hearts}
+
+What the title states.
+
+\begin{enumerate}
+	\renewcommand*{\theenumi}{\bullcntr{enumi}}
+	\renewcommand*{\labelenumi}{\theenumi}
+	\heartctrbull
+	
+	\item  One heart.  The size of the hearts does not change.
+	\item  Two hearts.
+	\item  Three hearts.
+	\item  Four hearts.
+	\item  Five hearts.
+	\item  Six hearts.
+	\item  Seven hearts.
+	\item  And so on\ldots
+\end{enumerate}
+
+
+
+\setcounter{secnumdepth}{0}
+\providecommand*\bysame{\leavevmode\hbox to3em{\hrulefill}\thinspace}
+
+\begin{thebibliography}{9}
+	\providecommand*{\bysame}{\leavevmode\hbox to3em{\hrulefill}\thinspace}
+	\addcontentsline{toc}{section}{\refname}
+
+	\bibitem{dtx}
+		G.~Mezzetti, \emph{The \bull\ package}, documented \TeX\
+		source (dtx), included in every distribution of \tbull\ (in
+		the file \filedir{\Bullcntr.dtx}).
+
+	\bibitem{overview}
+		\bysame, \emph{Overview of \tbull}, included in every
+		distribution of \tbull, surely as \LaTeX\ source (in the file
+		\filedir{\Bullcntr-man.tex}) and perhaps in precompiled PDF
+		format too (in the file \filedir{\Bullcntr-man.pdf}).
+
+	\bibitem{enum-sam}
+		\bysame, \emph{Using \tbenu: an example}, \LaTeX\ source,
+		included in every distribution of \tbull\ (in the file
+		\filedir{\Bullenum-sam.tex}).
+\end{thebibliography}
+
+
+\end{document}
diff --git a/Master/texmf-dist/doc/latex/bullcntr/bullenum-sam.tex b/Master/texmf-dist/doc/latex/bullcntr/bullenum-sam.tex
new file mode 100644
index 00000000000..72409e75dd9
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/bullcntr/bullenum-sam.tex
@@ -0,0 +1,688 @@
+%
+% Copyright (C) 2007 by Gustavo MEZZETTI <gustavo.mezzetti@istruzione.it>.
+%
+% This file is part of a work named "bullcntr package".
+%
+% The bullcntr package may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.3 of
+% this license or (at your option) any later version.
+% The latest version of this license is in
+%   http://www.latex-project.org/lppl.txt
+% and version 1.3 or later is part of all distributions of LaTeX
+% version 2005/12/01 or later.
+%
+% The bullcntr package has the LPPL maintenance status
+%   "author-maintained".
+%
+% The file `manifest.txt' that comes along with this file specifies what
+% the bullcntr package consists of; more precisely, it explains how the
+% locutions "Work" and "Compiled Work", used in the LaTeX Project Public
+% License, are to be interpreted in the case of this work.
+%
+% Note that the distribution of this file alone is "distribution of only
+% part of the Work" in the sense of the LaTeX Project Public License,
+% and should be avoided (see the LaTeX Project Public Licence for
+% details).
+%
+\documentclass[a4paper]{article}
+% Non-metric paper sizes have no right to exist! (;-)
+\usepackage{bullenum}
+% Of course, there is no need to load the hyperref package, but we
+% like to use it:
+\usepackage[bookmarksnumbered]{hyperref}
+
+\title{Using \tbenu:\\an example}
+\author{G.~Mezzetti}
+\date{April~2, 2007}
+
+% The following command definitions has nothing to do with the
+% bullcntr package: you may ignore them.
+
+\DeclareRobustCommand*{\command}[1]{%
+	{\texorpdfstring{\normalfont\ttfamily \char\escapechar}{\pdfbslash}#1}%
+}
+\DeclareRobustCommand*{\packlass}[1]{%
+	{\texorpdfstring{\normalfont \sffamily}{}#1}%
+}
+\DeclareRobustCommand*{\meta}[1]{%
+	\texorpdfstring
+		{\mbox{\normalfont \(\langle\textit{#1}\rangle\)}}%
+		{<#1>}%
+}
+\DeclareRobustCommand*{\filedir}[1]{{\normalfont\ttfamily #1}}
+\DeclareRobustCommand*{\cnt}[1]{\texttt{#1}}
+\DeclareRobustCommand*{\env}[1]{\texttt{#1}}
+\newcommand*{\Bullcntr}{bullcntr}
+\newcommand*{\bull}{\packlass{\Bullcntr}}
+\newcommand*{\tbull}{the \bull\ package}
+\newcommand*{\Bullenum}{bullenum}
+\newcommand*{\benu}{\packlass{\Bullenum}}
+\newcommand*{\tbenu}{the \benu\ package}
+\newcommand*{\Enumerat}{enumerate}
+\newcommand*{\beenv}{\env{\Bullenum}}
+\newcommand*{\enenv}{\env{\Enumerat}}
+
+\newcommand*{\pdfbslash}{}
+{\catcode`\|=0 |catcode`|\=12 |gdef|pdfbslash{\\}}
+
+% End of command definitions.
+
+% The following is just a neurotic symptom of the author:
+\hfuzz = 0pt
+\vfuzz = 0pt
+
+
+
+\begin{document}
+
+\maketitle
+
+\begin{abstract}
+	This document illustrates, by means of practical examples, the use
+	of \tbenu.  You should read the \LaTeX\ source of this document
+	and compare it with the output it produces; you may also find it
+	useful as a starting base for your own coding.
+\end{abstract}
+
+\tableofcontents
+
+
+
+\setcounter{secnumdepth}{0}
+
+\section{Introduction}
+
+If you are reading this document, you will probably know what \tbenu\
+is and what purpose it fulfills.  In the sequel, we shall assume no
+other knowledge about \tbenu\ besides this; in particular, we assume
+that you did not bother reading the documentation, and prefer to learn
+how to use this package by looking at some sample code.  We also take
+for granted that you are reading the \LaTeX\ source of this document,
+and comparing it with the output it produces.
+
+You might find it useful to read also~\cite{bull-sam}, which contains
+sample code that theaches you how to use \tbull.
+
+
+
+\setcounter{secnumdepth}{3}
+
+\section{Basic usage}
+
+Here we illustrate the use of the \beenv\ environment to produce lists
+whose items are numbered with the \verb|\bullcntr| command.  Different
+``bullet styles'' are obtained by means of some declarations that
+affects the size (or even the shape) of the bullets employed.
+
+
+
+\subsection{The standard sizes (\command{smartctrbull})}
+\label{SS:Xmp-Standard}
+
+In our first example, actually, we do not alter the default bullet
+style, that is, the output \tbenu\ will produce by itself, if you
+invoke it without options and do not declare any style by your own; in
+any case, it corresponds to the style selected by a
+\verb|\smartctrbull| declaration.
+
+\begin{bullenum}
+	\item
+		This is the first item of the list, that is, item~\#1.  It is
+		therefore numbered with a single bullet.  Poor bullet!  How
+		lonely it must feel!
+
+	\item
+		This is the second item of the list, that is, item~\#2.  It is
+		therefore numbered with two bullets, one on the left and one
+		on the right.  If you are a romantic nature, you might even
+		think of them as Romeo and Juliet\ldots
+
+	\item\label{Standard-3}
+		This is the third item of the list, that is---guess
+		what?---item~\#3.  Not surprisingly, it is numbered with three
+		bullets neatly arranged in the shape of an equilateral
+		triangle.
+
+	\item
+		This is the fourth item, item~\#4.  A square has exactly four
+		vertices, so it seems quite appropriate to lay out the four
+		bullets that must be used to number this item exactly in this
+		form, as you can see in the label.
+
+	\item
+		If you have not lost the track, you will agree that this is
+		the fifth item of the list.  A regular pentagon would probably
+		have been the optimal choice for displaying this value of the
+		counter, but for some reason the arrangement shown in the
+		label of this item has been preferred by the author of \tbull.
+
+	\item\label{Standard-6}
+		Sixth item!  Item~\#6!  A regular hexagon is used here!  Note,
+		however, that the bullets have shrunk to a smaller size,
+		because the size used so far would have made the bullet
+		cluster look a bit too crowded.
+
+	\item
+		In the opinion of the author, the shape used to display the
+		value~7 is even more pleasant than the regular hexagon used
+		for the value~6; indeed, this is a regular hexagon too, but
+		with the center marked by an additional bullet, which makes
+		the figure look more symmetric.
+
+	\item
+		If 7~was the perfect number of bullets, here we face the
+		disruption of this perfection.  The solution adopted for
+		arranging 8~bullets, which you can see here, is, in the
+		author's opinion, the less inelegant among all possibilities.
+
+	\item
+		Item~\#9, the last value that the \verb|\bullcntr| command can
+		display.  The bullets are just stacked in a $3\times3$ square
+		pattern---the obvious choice!
+\end{bullenum}
+
+
+
+\subsection{Moderately large bullets (\command{largectrbull})}
+
+Our next example illustrates the output produced by the style selected
+with a \verb|\largectrbull| declaration; this style continues to use,
+for the values over~5, the same bullet size adopted for the first five
+values.  So, we say
+
+\begin{bullenum}
+	\largectrbull
+
+	\item
+		This is the first item of the list, that is, item~\#1.  It is
+		therefore numbered with a single bullet.  Poor bullet!  How
+		lonely it must feel!
+
+	\item
+		This is the second item of the list, that is, item~\#2.  It is
+		therefore numbered with two bullets, one on the left and one
+		on the right.  If you are a romantic nature, you might even
+		think of them as Romeo and Juliet\ldots
+
+	\item\label{Large-3}
+		This is the third item of the list, that is---guess
+		what?---item~\#3.  Not surprisingly, it is numbered with three
+		bullets neatly arranged in the shape of an equilateral
+		triangle.
+
+	\item
+		This is the fourth item, item~\#4.  A square has exactly four
+		vertices, so it seems quite appropriate to lay out the four
+		bullets that must be used to number this item exactly in this
+		form, as you can see in the label.
+
+	\item
+		If you have not lost the track, you will agree that this is
+		the fifth item of the list.  A regular pentagon would probably
+		have been the optimal choice for displaying this value of the
+		counter, but for some reason the arrangement shown in the
+		label of this item has been preferred by the author of \tbull.
+
+	\item\label{Large-6}
+		Sixth item!  Item~\#6!  A regular hexagon is used here!  Note,
+		once again, that the bullets have \emph{not} shrunk to a
+		smaller size, so that the resulting picture looks pretty
+		crowded, although not intolerably bad-looking.  Compare the
+		label of this item with a reference to the corresponding
+		item~\ref{Standard-6} under~\ref{SS:Xmp-Standard}.
+
+	\item
+		In the opinion of the author, the shape used to display the
+		value~7 is even more pleasant than the regular hexagon used
+		for the value~6; indeed, this is a regular hexagon too, but
+		with the center marked by an additional bullet, which makes
+		the figure look more symmetric.
+
+	\item
+		If 7~was the perfect number of bullets, here we face the
+		disruption of this perfection.  The solution adopted for
+		arranging 8~bullets, which you can see here, is, in the
+		author's opinion, the less inelegant among all possibilities.
+
+	\item
+		Item~\#9, the last value that the \verb|\bullcntr| command can
+		display.  The bullets are just stacked in a $3\times3$ square
+		pattern---the obvious choice!
+\end{bullenum}
+
+
+
+\subsection{Small bullets (\command{smallctrbull})}
+
+The reciprocal example is to use small bullets throughout, from 1 to~9.
+Thus, we use the following source code:
+
+\begin{bullenum}
+	\smallctrbull
+
+	\item
+		This is the first item of the list, that is, item~\#1.  It is
+		therefore numbered with a single bullet.  Poor bullet!  How
+		lonely it must feel!
+
+	\item
+		This is the second item of the list, that is, item~\#2.  It is
+		therefore numbered with two bullets, one on the left and one
+		on the right.  If you are a romantic nature, you might even
+		think of them as Romeo and Juliet\ldots
+
+	\item\label{Small-3}
+		This is the third item of the list, that is---guess
+		what?---item~\#3.  Not surprisingly, it is numbered with three
+		bullets neatly arranged in the shape of an equilateral
+		triangle.
+
+	\item
+		This is the fourth item, item~\#4.  A square has exactly four
+		vertices, so it seems quite appropriate to lay out the four
+		bullets that must be used to number this item exactly in this
+		form, as you can see in the label.
+
+	\item
+		If you have not lost the track, you will agree that this is
+		the fifth item of the list.  A regular pentagon would probably
+		have been the optimal choice for displaying this value of the
+		counter, but for some reason the arrangement shown in the
+		label of this item has been preferred by the author of \tbull.
+
+	\item\label{Small-6}
+		Sixth item!  Item~\#6!  A regular hexagon is used here!  Note,
+		once more, that the bullets have \emph{not} shrunk to a
+		smaller size, because they were \emph{already} small in the
+		items shown thus far.
+
+	\item
+		In the opinion of the author, the shape used to display the
+		value~7 is even more pleasant than the regular hexagon used
+		for the value~6; indeed, this is a regular hexagon too, but
+		with the center marked by an additional bullet, which makes
+		the figure look more symmetric.
+
+	\item
+		If 7~was the perfect number of bullets, here we face the
+		disruption of this perfection.  The solution adopted for
+		arranging 8~bullets, which you can see here, is, in the
+		author's opinion, the less inelegant among all possibilities.
+
+	\item
+		Item~\#9, the last value that the \verb|\bullcntr| command can
+		display.  The bullets are just stacked in a $3\times3$ square
+		pattern---the obvious choice!
+\end{bullenum}
+
+Again, compare the references to items \#3 and~\#6 from different
+examples: standard bullets (\ref{Standard-3} and~\ref{Standard-6}),
+moderately large bullets (\ref{Large-3} and~\ref{Large-6}), small
+bullets (\ref{Small-3} and~\ref{Small-6}).
+
+
+
+\subsection{Tiny bullets}
+
+We come now to a sort of extreme example: the use of
+\verb|\textperiodcentered|.  Since there is no predefined declaration
+for this style, it is necessary to manually redefine the two
+``hooks'', \verb|\counterlargebullet| and \verb|\countersmallbullet|,
+that \tbull\ (and therefore, indirectly, also \tbenu) call when they
+want to typeset a bullet.
+
+\begin{bullenum}
+	\renewcommand*{\counterlargebullet}{\textperiodcentered}
+	\renewcommand*{\countersmallbullet}{\textperiodcentered}
+
+	\item
+		This is the first item of the list, that is, item~\#1.  It is
+		therefore numbered with a single bullet.  Poor bullet!  How
+		lonely it must feel!
+
+	\item
+		This is the second item of the list, that is, item~\#2.  It is
+		therefore numbered with two bullets, one on the left and one
+		on the right.  If you are a romantic nature, you might even
+		think of them as Romeo and Juliet\ldots
+
+	\item
+		This is the third item of the list, that is---guess
+		what?---item~\#3.  Not surprisingly, it is numbered with three
+		bullets neatly arranged in the shape of an equilateral
+		triangle.
+
+	\item
+		This is the fourth item, item~\#4.  A square has exactly four
+		vertices, so it seems quite appropriate to lay out the four
+		bullets that must be used to number this item exactly in this
+		form, as you can see in the label.
+
+	\item
+		If you have not lost the track, you will agree that this is
+		the fifth item of the list.  A regular pentagon would probably
+		have been the optimal choice for displaying this value of the
+		counter, but for some reason the arrangement shown in the
+		label of this item has been preferred by the author of \tbull.
+
+	\item
+		Sixth item!  Item~\#6!  A regular hexagon is used here!  Note
+		that it was really impossible, this time, for the bullets to
+		shrunk to a still smaller size than the one that has been
+		adopted in the above items!
+
+	\item
+		In the opinion of the author, the shape used to display the
+		value~7 is even more pleasant than the regular hexagon used
+		for the value~6; indeed, this is a regular hexagon too, but
+		with the center marked by an additional bullet, which makes
+		the figure look more symmetric.
+
+	\item
+		If 7~was the perfect number of bullets, here we face the
+		disruption of this perfection.  The solution adopted for
+		arranging 8~bullets, which you can see here, is, in the
+		author's opinion, the less inelegant among all possibilities.
+
+	\item
+		Item~\#9, the last value that the \verb|\bullcntr| command can
+		display.  The bullets are just stacked in a $3\times3$ square
+		pattern---the obvious choice!
+\end{bullenum}
+
+This bullet style might be employed in a \beenv\ environment nested
+inside another one.
+
+
+
+\subsection{St.\texorpdfstring{\,}{ }Valentine (\command{heartctrbull})}
+\label{SS:Xmp-Hearts}
+
+To end this inventory of variations, let us illustrate the use of a
+fancier ``bullet'': a little heart.  We obtain this with a
+\verb|\heartctrbull| declaration.
+
+\begin{bullenum}
+	\heartctrbull
+
+	\item\label{Hearts-1}
+		This is the first item of the list, that is, item~\#1.  It is
+		therefore numbered with a single heart.  Poor heart!  It is a
+		true lonely heart!
+
+	\item
+		This is the second item of the list, that is, item~\#2.  It is
+		therefore numbered with two hearts, one on the left and one on
+		the right.  Thinking of Romeo and Juliet is absolutely natural
+		in this context\ldots
+
+	\item\label{Hearts-3}
+		This is the third item of the list, that is---guess
+		what?---item~\#3.  Not surprisingly, it is numbered with three
+		hearts neatly arranged in the shape of an equilateral
+		triangle.
+
+	\item\label{Hearts-4}
+		This is the fourth item, item~\#4.  A square has exactly four
+		vertices, so it seems quite appropriate to lay out the four
+		hearts that must be used to number this item exactly in this
+		form, as you can see in the label.
+
+	\item\label{Hearts-5}
+		If you have not lost the track, you will agree that this is
+		the fifth item of the list.  A regular pentagon would probably
+		have been the optimal choice for displaying this value of the
+		counter, but for some reason the arrangement shown in the
+		label of this item has been preferred by the author of \tbull.
+
+	\item
+		Sixth item!  Item~\#6!  A regular hexagon is used here,
+		adorned with hearts!  Of course, the hearts do not shrink, as
+		doesn't yours, and as doesn't your ardent passion!
+
+	\item\label{Hearts-7}
+		In the opinion of the author, the shape used to display the
+		value~7 is even more pleasant than the regular hexagon used
+		for the value~6; indeed, this is a regular hexagon too, but
+		with the center marked by an additional heart, which makes the
+		figure look more symmetric.
+
+	\item\label{Hearts-8}
+		If 7~was the perfect number of hearts, here we face the
+		disruption of this perfection.  The solution adopted for
+		arranging 8~hearts, which you can see here, is, in the
+		author's opinion, the less inelegant among all possibilities.
+
+	\item
+		Item~\#9, the last value that the \verb|\bullcntr| command can
+		display.  The hearts are just stacked in a $3\times3$ square
+		pattern---the obvious choice!
+\end{bullenum}
+
+% ( paren match
+This could be used in valentines to enumerate to your beloved the
+terms of your passion\ldots~:-)
+
+Cross-references are a bit funny with this style; they look like this:
+\ref{Hearts-1}, \ref{Hearts-3}, \ref{Hearts-4}, \ref{Hearts-5},
+\ref{Hearts-7}, and~\ref{Hearts-8}.
+
+
+
+\section{Nested enumerations}
+
+Try not to overdo this: carrying it to excess could lead to confused
+output.
+
+
+
+\subsection{Nesting one \beenv\ inside another}
+\label{SS:NestBullBull}
+
+We use ``large'' bullets for the outer environment, and ``tiny''
+bullets for the inner one.
+
+\begin{bullenum}
+	\largectrbull
+
+	\item
+		First item: let this one alone, just to have a term of
+		comparison.
+
+	\item\label{NestBull-2}
+		Second item.  Here we nest another \beenv\ environment:
+		\begin{bullenum}
+			\renewcommand*{\counterlargebullet}{\textperiodcentered}
+			\renewcommand*{\countersmallbullet}{\textperiodcentered}
+			\item\label{NestBull-2.1}
+				First sub-item.
+			\item\label{NestBull-2.2}
+				Second sub-item.
+			\item\label{NestBull-2.3}
+				Third sub-item.
+			\item\label{NestBull-2.4}
+				Fourth sub-item.  OK, this should suffice.
+		\end{bullenum}
+		Don't forget, we are still inside item~\ref{NestBull-2} of
+		the outer enumeration.
+
+	\item\label{NestBull-3}
+		Third item (of the outer enumeration).  Let us repeat exactly
+		the same nested enumeration as in item~\ref{NestBull-2}.
+		\begin{bullenum}
+			\renewcommand*{\counterlargebullet}{\textperiodcentered}
+			\renewcommand*{\countersmallbullet}{\textperiodcentered}
+			\item\label{NestBull-3.1}
+				First sub-item.
+			\item\label{NestBull-3.2}
+				Second sub-item.
+			\item\label{NestBull-3.3}
+				Third sub-item.
+			\item\label{NestBull-3.4}
+				Fourth sub-item.  OK, this should suffice.
+		\end{bullenum}
+		Back to item~\ref{NestBull-3} of the outer enumeration.
+\end{bullenum}
+
+Now the bad news: you might want to refer to, say, item
+\ref{NestBull-3.4} under item~\ref{NestBull-3}.  As you can see, the
+reference comes out wrong, since the label from the outer enumeration
+% ( paren match
+is typeset with the style of the inner one.~:-(\spacefactor=\sfcode`.
+\space This is a known bug: I\@ decided not to correct it, since doing
+so would require introducing the concept of bullet styles
+distinguished by level, which I\@ deem intolerably burdensome.  Be
+aware of this limitation when you nest \beenv\ environments inside one
+another (this does not apply, however, to \beenv's nested within
+\enenv's, as we'll see in the following examples).
+
+
+
+\subsection{Nesting \beenv\ inside \enenv}
+\label{SS:NestBullEnum}
+
+Let us repeat the same example shown above, but changing the outer
+environment to \enenv, and suppressing style variations.
+
+\begin{enumerate}
+	\item
+		First item: let this one alone, just to have a term of
+		comparison.
+
+	\item\label{NestBuEn-2}
+		Second item.  Here we nest a \beenv\ environment:
+		\begin{bullenum}
+			\item\label{NestBuEn-2.1}
+				First sub-item.
+			\item\label{NestBuEn-2.2}
+				Second sub-item.
+			\item\label{NestBuEn-2.3}
+				Third sub-item.
+			\item\label{NestBuEn-2.4}
+				Fourth sub-item.  OK, this should suffice.
+		\end{bullenum}
+		Don't forget, we are still inside item~\ref{NestBuEn-2} of
+		the outer enumeration.
+
+	\item\label{NestBuEn-3}
+		Third item (of the outer enumeration).  Let us repeat exactly
+		the same nested enumeration as in item~\ref{NestBuEn-2}.
+		\begin{bullenum}
+			\item\label{NestBuEn-3.1}
+				First sub-item.
+			\item\label{NestBuEn-3.2}
+				Second sub-item.
+			\item\label{NestBuEn-3.3}
+				Third sub-item.
+			\item\label{NestBuEn-3.4}
+				Fourth sub-item.  OK, this should suffice.
+		\end{bullenum}
+		Back to item~\ref{NestBuEn-3} of the outer enumeration.
+\end{enumerate}
+
+See Subsection~\ref{S:CrossXmp} for examples of cross-references to
+the items of these lists.
+
+
+
+\subsection{Nesting \enenv\ inside \beenv}
+\label{SS:NestEnumBull}
+
+As before, but the other way around: \beenv\ is now the outer
+environment, and \enenv\ the inner one.
+
+\begin{bullenum}
+	\item
+		First item: let this one alone, just to have a term of
+		comparison.
+
+	\item\label{NestEnBu-2}
+		Second item.  Here we nest an \enenv\ environment:
+		\begin{enumerate}
+			\item\label{NestEnBu-2.1}
+				First sub-item.
+			\item\label{NestEnBu-2.2}
+				Second sub-item.
+			\item\label{NestEnBu-2.3}
+				Third sub-item.
+			\item\label{NestEnBu-2.4}
+				Fourth sub-item.  OK, this should suffice.
+		\end{enumerate}
+		Don't forget, we are still inside item~\ref{NestEnBu-2} of
+		the outer enumeration.
+
+	\item\label{NestEnBu-3}
+		Third item (of the outer enumeration).  Let us repeat exactly
+		the same nested enumeration as in item~\ref{NestEnBu-2}.
+		\begin{enumerate}
+			\item\label{NestEnBu-3.1}
+				First sub-item.
+			\item\label{NestEnBu-3.2}
+				Second sub-item.
+			\item\label{NestEnBu-3.3}
+				Third sub-item.
+			\item\label{NestEnBu-3.4}
+				Fourth sub-item.  OK, this should suffice.
+		\end{enumerate}
+		Back to item~\ref{NestEnBu-3} of the outer enumeration.
+\end{bullenum}
+
+Again, see Subsection~\ref{S:CrossXmp} for examples of
+cross-references to the items of the above lists.
+
+
+
+\section{Examples of cross-references}
+\label{S:CrossXmp}
+
+Cross-references are printed using the bullet style that was in effect
+when the \verb|\label| command was given.  The following examples
+illustrate this.
+
+In~\ref{SS:Xmp-Standard} we had references to~\ref{Standard-3} and
+to~\ref{Standard-6}.  In~\ref{SS:Xmp-Hearts}, on the other hand, the
+references were to~\ref{Hearts-1}, to~\ref{Hearts-3},
+to~\ref{Hearts-4}, to~\ref{Hearts-5}, to~\ref{Hearts-7}, and
+to~\ref{Hearts-8}.
+
+We turn now to nested lists.  We let alone the example
+of~\ref{SS:NestBullBull}, we already know that references come out
+wrong in this case.  In~\ref{SS:NestBullEnum} we had items
+\ref{NestBuEn-2.1}, \ref{NestBuEn-2.2}, \ref{NestBuEn-2.3}, and
+\ref{NestBuEn-2.4}, all listed under item~\ref{NestBuEn-2}, and
+similarly items \ref{NestBuEn-3.1}, \ref{NestBuEn-3.2},
+\ref{NestBuEn-3.3}, and \ref{NestBuEn-3.4}, as part of
+item~\ref{NestBuEn-3}.  In~\ref{SS:NestEnumBull}, on the other hand,
+we had items \ref{NestEnBu-2.1}, \ref{NestEnBu-2.2},
+\ref{NestEnBu-2.3}, and \ref{NestEnBu-2.4}, all listed under
+item~\ref{NestEnBu-2}: as you can see, the bullets now precede the
+reference to the item of \enenv; similarly, items \ref{NestEnBu-3.1},
+\ref{NestEnBu-3.2}, \ref{NestEnBu-3.3}, and \ref{NestEnBu-3.4} are now
+a part of the ``bulletted'' item~\ref{NestEnBu-3}.
+
+
+
+\setcounter{secnumdepth}{0}
+
+\begin{thebibliography}{9}
+	\providecommand*{\bysame}{\leavevmode\hbox to3em{\hrulefill}\thinspace}
+	\addcontentsline{toc}{section}{\refname}
+
+	\bibitem{dtx}
+		G.~Mezzetti, \emph{The \bull\ package}, documented \TeX\
+		source (dtx), included in every distribution of \tbull\ (in
+		the file \filedir{\Bullcntr.dtx}).
+
+	\bibitem{overview}
+		\bysame, \emph{Overview of \tbull}, included in every
+		distribution of \tbull, surely as \LaTeX\ source (in the file
+		\filedir{\Bullcntr-man.tex}) and perhaps in precompiled PDF
+		format too (in the file \filedir{\Bullcntr-man.pdf}).
+
+	\bibitem{bull-sam}
+		\bysame, \emph{Using \tbull: an example}, \LaTeX\ source,
+		included in every distribution of \tbull\ (in the file
+		\filedir{\Bullcntr-sam.tex}).
+\end{thebibliography}
+
+\end{document}
diff --git a/Master/texmf-dist/doc/latex/bullcntr/manifest.txt b/Master/texmf-dist/doc/latex/bullcntr/manifest.txt
new file mode 100644
index 00000000000..bf73548ccf2
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/bullcntr/manifest.txt
@@ -0,0 +1,101 @@
+
+This is file `manifest.txt'.
+
+This file is part of a work named "bullcntr package".
+
+Copyright (C) 2007 by Gustavo MEZZETTI <gustavo.mezzetti@istruzione.it>.
+
+The bullcntr package may be distributed and/or modified under the
+conditions of the LaTeX Project Public License, either version 1.3
+of this license or (at your option) any later version.
+The latest version of this license is in
+  http://www.latex-project.org/lppl.txt
+and version 1.3 or later is part of all distributions of LaTeX
+version 2005/12/01 or later.
+
+The bullcntr package has the LPPL maintenance status
+  "author-maintained".
+
+This file specifies what the bullcntr package consists of; more
+precisely, it explains how the locutions "Work" and "Compiled Work",
+used in the LaTeX Project Public License, are to be interpreted
+in the case of this work.
+
+April 2, 2007 (vers. 0.04)
+
+
+
+MEANING OF THE TERM "Work"
+==========================
+
+In the case of the bullcntr package, the "Work" is the collection of the
+following 7 files:
+
+00readme.txt        --  start by reading this file
+manifest.txt        --  the file you are reading now
+bullcntr.dtx        --  main source file
+bullcntr.ins        --  installation script
+bullcntr-man.tex    --  LaTeX source of package overview/manual
+bullcntr-sam.tex    --  sample code that uses the bullcntr package
+bullenum-sam.tex    --  sample code that uses the bullenum package
+
+If you have received the 7 files listed above, you possess an integral copy
+of the bullcntr package.
+
+
+
+MEANING OF THE TERM "Compiled Work"
+===================================
+
+In the case of the bullcntr package, a "Compiled Work" is the collection of:
+
+a) the following 5 files that are also part of the "Work" (see above):
+
+00readme.txt
+manifest.txt
+bullcntr-man.tex
+bullcntr-sam.tex
+bullenum-sam.tex
+
+AND
+b) the following 3 files:
+
+bullcntr.sty        --  the bullcntr "executable" package
+bullenum.sty        --  the bullenum "executable" package
+bullcntr.dvi        --  documentation in DVI format
+
+You may, at your option, substitute (or supplement) the file `bullcntr.dvi'
+with the following one:
+
+bullcntr.pdf        --  documentation in PDF format
+
+but at least one among the files `bullcntr.dvi' and `bullcntr.pdf' must be
+included in a "Compiled Work" that you wish to distribute.  The file
+`bullcntr.pdf' is obtained by submitting to the program pdflatex the file
+`bullcntr.dtx', following the same steps as those explained in
+`00readme.txt' under the title "How to generate the documentation".
+
+
+
+ANCILLARY FILES
+===============
+
+The package of files distributed through the Comprehensive TeX Archive
+Network (CTAN) includes also the following 2 files:
+
+README              --  guide to directory contents
+bullcntr-man.pdf    --  package overview/manual in PDF format
+
+These two files are included only for the convenience of the CTAN visitors
+and are _not_ a required part of the bullcntr package (of course you may,
+if you wish, include them in your distribution too).
+
+
+
+COMMENT
+=======
+
+Please remember that, in order to distribute a LPPL-compliant copy of the
+bullcntr package, it suffices to distribute only the 7 files that
+constitute the "Work".
+
diff --git a/Master/texmf-dist/source/latex/bullcntr/bullcntr.dtx b/Master/texmf-dist/source/latex/bullcntr/bullcntr.dtx
new file mode 100644
index 00000000000..d8f14653cc1
--- /dev/null
+++ b/Master/texmf-dist/source/latex/bullcntr/bullcntr.dtx
@@ -0,0 +1,1661 @@
+% \iffalse
+%   (This is a META-COMMENT.)
+%
+%   This is file `bullcntr.dtx'.
+%
+%   This file is part of a work named "bullcntr package".
+%
+%   Copyright (C) 2007 by Gustavo MEZZETTI <gustavo.mezzetti@istruzione.it>.
+%
+%   This file may be distributed and/or modified under the conditions
+%   of the LaTeX Project Public License, either version 1.3 of this
+%   license or (at your option) any later version.
+%   The latest version of this license is in
+%     http://www.latex-project.org/lppl.txt
+%   and version 1.3 or later is part of all distributions of LaTeX
+%   version 2005/12/01 or later.
+%
+%   The bullcntr package has the LPPL maintenance status
+%     "author-maintained".
+%
+%   The file `manifest.txt' that comes along with this file specifies
+%   what the bullcntr package consists of; more precisely, it explains
+%   how the locutions "Work" and "Compiled Work", used in the LaTeX
+%   Project Public License, are to be interpreted in the case of this
+%   work.
+%
+%   Note that the distribution of this file alone is "distribution of
+%   only part of the Work" in the sense of the LaTeX Project Public
+%   License, and should be avoided (see the LaTeX Project Public
+%   Licence for details).
+%
+%   (End of the META-COMMENT.)
+% \fi
+%
+% \def\filename{bullcntr.dtx}
+% \def\fileversion{0.04}
+% \def\filedate{2007/04/02}
+% \def\docdate {2007/04/02}
+% \def\doclongdate{April~2, 2007}
+%
+% \CheckSum{328}
+%
+% \changes{0.01}{2007 Feb 07}{First provisional writing of the code}
+% \changes{0.02}{2007 Feb 08}{Modified layout of bullets for the
+%   value~4}
+% \changes{0.03}{2007 Feb 16}{Introduced declarations for the four
+%   predefined bullet styles (\protect\cmnd{smartctrbull} and
+%   siblings)}
+% \changes{0.03}{2007 Feb 16}{Introduced options corresponding to the
+%   declarations for the four predefined bullet styles
+%   (\protect\opt{smartctrbull} and siblings)}
+% \changes{0.03}{2007 Feb 16}{Developed the
+%   \protect\packlass{\protect\bullenum} subsidiary package defining
+%   the \protect\env{bullenum} environment}
+% \changes{0.03}{2007 Feb 16}{Thoroughly reorganized the code to
+%   correct a serious bug regarding labels and references}
+%
+%% \CharacterTable
+%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%%   Digits        \0\1\2\3\4\5\6\7\8\9
+%%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%%   Dollar        \$     Percent       \%     Ampersand     \&
+%%   Acute accent  \'     Left paren    \(     Right paren   \)
+%%   Asterisk      \*     Plus          \+     Comma         \,
+%%   Minus         \-     Point         \.     Solidus       \/
+%%   Colon         \:     Semicolon     \;     Less than     \<
+%%   Equals        \=     Greater than  \>     Question mark \?
+%%   Commercial at \@     Left bracket  \[     Backslash     \\
+%%   Right bracket \]     Circumflex    \^     Underscore    \_
+%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%%   Right brace   \}     Tilde         \~}
+%
+% \MakeShortVerb{\"}
+% \DeleteShortVerb{\|}
+%
+% \DoNotIndex{\begin,\end,\def,\let,\else,\fi,\or,\@ifdefinable,\@empty}
+% \DoNotIndex{\newcommand,\renewcommand}
+% \DoNotIndex{\newenvironment,\renewenvironment}
+% \DoNotIndex{\z@,\z@skip,\p@,\@ne,\tw@,\thr@@,\@m,\@M,\m@ne}
+% \DoNotIndex{\DeclareOption}
+%
+% \IndexPrologue{
+%   \section{\indexname}
+%   Numbers in italics refer to the page where the corresponding entry
+%   is described, the ones underlined to the code line of the
+%   definition, the rest to the code lines where the entry is used.
+% }
+% \setcounter{IndexColumns}{2}
+%
+% \GlossaryPrologue{\section{Change History}}
+%
+% \setcounter{StandardModuleDepth}{1}
+%
+% \newcommand*{\DS}{\textsf{DocStrip}}
+% \renewcommand*{\partname}{Part}
+% \newcommand*{\bullcntr}{bullcntr}
+% \newcommand*{\bullenum}{bullenum}
+% \makeatletter
+% \newcommand*{\myspecialindex}[2]
+%    {\special@index{#1\actualchar#2\encapchar main}}
+% \makeatother
+% \newcommand*{\counterindex}[1]{\myspecialindex{#1}{{\string\ttfamily
+%    \space #1} (counter)}\index{counters:\levelchar{\protect\ttfamily
+%    #1}\encapchar usage}}
+% \newcommand*{\optuseindex}[1]{\SortIndex{#1}{\protect\opt{#1}
+%    (option)\encapchar usage}\index{options:\levelchar
+%    \protect\opt{#1}\encapchar usage}}
+% \DeclareRobustCommand*{\opt}[1]{{\normalfont\ttfamily #1}}
+% \newcommand*{\sopt}[1]{\mbox{\opt{#1}}\optuseindex{#1}}
+% \DeclareRobustCommand*{\packlass}[1]{{\normalfont\sffamily #1}}
+% \DeclareRobustCommand*{\filedir}[1]{{\normalfont\ttfamily #1}}
+% \DeclareRobustCommand*{\env}[1]{{\normalfont\ttfamily #1}}
+% \DeclareRobustCommand*{\ctr}[1]{{\normalfont\ttfamily #1}}
+% \DeclareRobustCommand*{\cmnd}[1]{\texttt{\bslash #1}}
+% \newcommand*{\circnumb}[1]{%
+%   \makebox[.6666667em]{\makebox[0pt]{$\bigcirc$}\makebox[0pt]{\small #1}}%
+% }
+%
+% \newcommand*{\oMr}{.13397460}
+% \newcommand*{\oPr}{1.8660254}
+%
+%
+%
+% \title{
+%    The \packlass{\bullcntr} package\thanks{This file has version
+%    \fileversion, release date \filedate;
+%    last documentation update: \docdate.
+%    Copyright \copyright~2007 by G.~Mezzetti
+%    (see page~\pageref{S:Copy}).}
+% }
+% \author{G. Mezzetti}
+% \date{\doclongdate}
+%
+% \maketitle
+%
+% \begin{abstract}
+%    This document describes a \LaTeX\ (former \LaTeXe) package that
+%    defines a new command, similar to "\fnsymbol", for displaying the
+%    value of a counter: this command typesets a number of bullets
+%    equal to the value of the counter, in a nice arrangement.  The
+%    value of the counter must lie between 1 and~9.
+%
+%    An ancillary package, named \env{\bullenum}, defines an
+%    environment, similar to \env{enumerate}, that produces lists
+%    whose items are numbered in this way.
+% \end{abstract}
+%
+% \tableofcontents
+% \listoffigures
+%
+% \clearpage
+% \begingroup
+%
+%    \setlength{\parskip}{\medskipamount}
+%    \setlength{\parindent}{0pt}
+%
+% \section*{Copyright notice}
+%    \label{S:Copy}
+%    \vspace{-\parskip}
+%
+%    Copyright \copyright~2007 by Gustavo \textsc{Mezzetti}.
+%    All rights are reserved, except as noted below.
+%
+%    This document has been produced by feeding to a \LaTeX\
+%    typesetting engine the file \filedir{\filename} version
+%    \fileversion\ (\docdate).  This file is part of a work named
+%    ``\packlass{\bullcntr} package'', and may distributed and/or
+%    modified only as a part thereof.  Subsection~\ref{sS:License} on
+%    page~\pageref{sS:License} explains the conditions under which the
+%    \packlass{\bullcntr} package may be distributed and/or modified.
+%
+%    The \packlass{\bullcntr} package has the LPPL maintenance status
+%    ``author-maintained''.
+%
+%    Permission is granted to make new printed copies of this document,
+%    by any means (\emph{e.g.}, photocopying, direct printing from the
+%    electronic version, and so on).
+%
+%    Note, though, that distribution of this document alone is
+%    ``distribution of only part of the Work'' in the sense of the
+%    \LaTeX\ Project Public License, and should therefore be avoided:
+%    please distribute, in addition, the source file
+%    \filedir{\bullcntr.dtx} together with all other files listed in
+%    \filedir{manifest.txt}, as explained as well in
+%    Subsection~\ref{sS:License} and in the file
+%    \filedir{manifest.txt} itself.
+%
+% \section*{Author's addresses}
+%    \vspace{-\parskip}
+%
+%    The recommended way to contact the author is by e-mail; his address is:
+%
+%    \begin{list}{\setlength{\topsep}{0pt}}\item\relax
+%      \ttfamily
+%      gustavo.mezzetti@istruzione.it
+%    \end{list}
+%
+%    Please include the \emph{exact} phrase \verb*|bullcntr package| in the
+%    \emph{subject} of your message; otherwise, your message could be
+%    thrown away by a mail filter.  In this regard, the weakness of the
+%    laws concerning the protection of privacy forces me to explicitly
+%    forbid the use of the above address for any kind of advertising,
+%    marketing, polling, or similar commercial or statistical contact.
+%
+%    If you have no e-mail access, write to:
+%
+%    \begin{list}{\setlength{\topsep}{0pt}}\item\relax
+%      Gustavo \textsc{Mezzetti}\\
+%      L.~A.~S. ``A.~Modigliani''\\
+%      Via E.~Degli Scrovegni, 30\\
+%      I--35121\quad PADOVA\quad PD\\
+%      Italy
+%    \end{list}
+%
+% \endgroup
+%
+%
+%
+% \setcounter{secnumdepth}{0}
+%
+%
+%
+% \clearpage
+% \section{Introduction}
+%
+%    I can't remember exactly where the idea of this package arose
+%    from, but I am pretty sure that the first time I saw a list of
+%    items numbered with an increasing number of bullets was in
+%    certain handwritten notes concerning sheaves cohomology, may be a
+%    decade or so ago.  Since then, I had repeatedly thought of
+%    writing a \LaTeX\ package to implement this kind of numbering,
+%    but I had never resolved to do so, until very recently, when I
+%    ^^A ( paren match
+%    suddenly decided to sit down and write the code!~:-)
+%
+%    Regrettably, shortly after I~uploaded version 0.02 of the package
+%    to the CTAN, I~had to discover a major bug in the macros I~had
+%    dashed off in such a haste, which required an extensive (and more
+%    careful!)\ redesign of the code.  I~took this opportunity to
+%    thoroughly reorganize it, making it easier, for the user, to
+%    switch from one style of bullets to another, and also adding an
+%    ancillary package that simplified the creation of lists numbered
+%    with bullets.  This led to version 0.03.
+%
+%    You are now reading the source of version 0.04, which corrects
+%    another pretty serious bug brought in---alas---with the
+%    modifications introduced in version 0.03: the "\@b@ll@@cntr"
+%    macro, called by the "\bullcntr" command, behaved erroneously
+%    when invoked with a value of the counter equal to zero.
+%
+%    Since I~had to repackage the distribution, I~also decided to
+%    include, along with the other files, a couple of \LaTeX\ sources
+%    that illustrate in practice the use of the
+%    \packlass{\bullcntr}\slash \packlass{\bullenum} packages, and
+%    also the \LaTeX\ source of the user manual, that is, of the file
+%    previously offered on the CTAN\@ sites under the name
+%    \filedir{overview.pdf}; this file has now the base name
+%    \filedir{bullcntr-man}, to make it more easily searchable, and
+%    has been turned into a required part of the \packlass{\bullcntr}
+%    package.  In doing all this, I~met some suggestions given me by
+%    the people at CTAN\@.
+%
+%    \subsection{Disclaimer}
+%
+%    Although a \LaTeX\ package is a piece of software that executes in a
+%    rather protected environment and should therefore be relatively
+%    incapable of doing serious damages, no warranty is given, as usual with
+%    computer software, that this code will work properly, or even that it
+%    will work at all.  To be on the safe side, be aware that using this
+%    code can even result in loss of data and/or damages to your disks and
+%    your storage media.  If you use this code, you do so exclusively at
+%    your own risk!
+%
+%    See Subsection~\ref{sS:License} and the \LaTeX\ Project Public
+%    License for more information.
+%
+%    \subsection{About this document}
+%
+%    This document, like many documentation files distributed for
+%    \LaTeX, is divided into two parts.
+%
+%    The first part, \emph{User's Manual}, contains all the documentation
+%    you need to succesfully \emph{use} the package that this document
+%    presents.  Every user of the \packlass{\bullcntr} package will
+%    probably want to read this part.
+%
+%    The second part, \emph{Implementation}, can be omitted if you
+%    want (explanations on how to omit it are given at the beginning
+%    of the part itself), and contains information that concerns only
+%    ``hackers'' who want to learn how the package that this document
+%    presents is \emph{implemented}.  Actually, this part contains the
+%    complete listing of the \LaTeX\ code that implements the macros,
+%    in the usual \DS\ format; if you are not a \LaTeX\ hacker, this
+%    part will probably have little meaning to you.
+%
+%
+%
+% \setcounter{secnumdepth}{3}
+%
+%
+%
+% \clearpage
+% \part{User's Manual}
+%
+% \section{About this part}
+%
+%    This part contains detailed instructions on how to install the
+%    \packlass{\bullcntr} package, how to use it, and how to generate
+%    this documentation.  Note that including in this document the
+%    instructions on how to generate the document itself may seem
+%    pretty useless, but actually isn't: you might be reading a copy
+%    obtained from some other source.
+%
+% \section{Installing the \packlass{\bullcntr} package and generating this manual}
+%
+%    As usual for \LaTeX\ distributions, the \packlass{\bullcntr}
+%    package is distributed in the form of a \filedir{.dtx} file,
+%    namely \filedir{\bullcntr.dtx}, and an accompanying
+%    \filedir{.ins} file, namely \filedir{\bullcntr.ins}.
+%
+%    \subsection{Installation}
+%
+%    To install the package, run \LaTeX\ (or Plain \TeX) once on the
+%    file \filedir{\bullcntr.ins}.  This will generate the following
+%    two \LaTeX\ input files:
+%    \begin{quote}
+%      \ttfamily
+%      \bullcntr.sty\\
+%      \bullenum.sty
+%    \end{quote}
+%    To finish the installation, move them into a \LaTeX\ input
+%    directory.  The above listing of the files you need to move is
+%    also displayed on the terminal at the end of the run of the file
+%    \filedir{\bullcntr.ins}.  The documentation of your \TeX\
+%    installation should tell you how to find the \LaTeX\ input
+%    directory/ies, and probably also how to create new \LaTeX\ input
+%    directories reserved to contain your private classes and
+%    packages.  If your \TeX\ installation offers you the chance of
+%    defining your private \LaTeX\ input directories, I recommend you
+%    exploit this possibility and place the generated files into such
+%    a directory.
+%
+%    Please note that before using the \packlass{\bullcntr} package
+%    you must read the license (see Subsection~\ref{sS:License}) to
+%    see whether its terms are acceptable for you, especially for what
+%    concerns the lack of any warranty; if they are not, don't use
+%    this program.
+%
+%    \subsection{Documentation}
+%
+%    To produce this documentation, run \LaTeX\ three times (for the
+%    table of contents to be correct) on the file
+%    \filedir{\bullcntr.dtx}.  This won't produce the index and the
+%    change history, however: for those, you have to run
+%    \emph{MakeIndex} on the files \filedir{\bullcntr.idx} and
+%    \filedir{\bullcntr.glo}, produced during the last of the
+%    aforesaid three \LaTeX\ runs, with the styles \filedir{gind.ist}
+%    and \filedir{gglo.ist}, respectively (these styles are part of
+%    the standard \LaTeX\ distribution); then pass
+%    \filedir{\bullcntr.dtx} through \LaTeX\ twice more.
+%
+%    The documentation produced by default includes the
+%    \emph{Implementation} part too; see the beginning of this part
+%    for instructions on how to omit it.
+%
+%    \subsection{License}
+%    \label{sS:License}
+%
+%    The \packlass{\bullcntr} package is \emph{not} in the public
+%    domain: its author, Gustavo \textsc{Mezzetti}, owns the
+%    copyright, and in general retains all the rights therein; but as
+%    a special exception, the author grants you the permissions
+%    indicated below.
+%
+%    \subsubsection{Distribution and/or modification}
+%
+%    The \packlass{\bullcntr} package may be distributed and/or
+%    modified under the conditions of the \LaTeX\ Project Public
+%    License, either version~1.3 of this license or (at your option)
+%    any later version.  The latest version of this license is in
+%    \begin{quote}
+%      \ttfamily
+%      http://www.latex-project.org/lppl.txt
+%    \end{quote}
+%    and version~1.3 or later is part of all distributions of \LaTeX\
+%    version 2005/12/01 or later.
+%
+%    The \packlass{\bullcntr} package has the LPPL maintenance status
+%    ``author-maintained''.
+%
+%    The file \filedir{manifest.txt} included along with this file
+%    specifies what the \packlass{\bullcntr} package consists of; more
+%    precisely, it explains how the locutions ``Work'' and ``Compiled
+%    Work'', used in the \LaTeX\ Project Public License, are to be
+%    interpreted in the case of this work.
+%
+%    \subsubsection{Use}
+%
+%    The use of the \packlass{\bullcntr} package is unrestricted,
+%    provided that you accept the terms and conditions of the \LaTeX\
+%    Project Public License and of the following subsection for what
+%    concerns the absence of any warranty.
+%
+%    \subsubsection{No warranty}
+%
+%    There is absolutely no warranty for the \packlass{\bullcntr}
+%    package.  The Copyright Holder provides the \packlass{\bullcntr}
+%    package ``as is'', without warranty of any kind, either expressed
+%    or implied, including, but not limited to, the implied warranties
+%    of merchantability and fitness for a particular purpose.  The
+%    entire risk as to the quality and performance of the
+%    \packlass{\bullcntr} package is with you.  Should the
+%    \packlass{\bullcntr} package prove defective, you assume the cost
+%    of all necessary servicing, repair, or correction.
+%
+%    In no event will The Copyright Holder, or any other party who may
+%    distribute and/or modify the \packlass{\bullcntr} package as
+%    permitted by the \LaTeX\ Project Public License, be liable to you
+%    for damages, including any general, special, incidental or
+%    consequential damages arising out of any use of the
+%    \packlass{\bullcntr} package or out of inability to use it
+%    (including, but not limited to, loss of data, data being rendered
+%    inaccurate, or losses sustained by anyone as a result of any
+%    failure of the \packlass{\bullcntr} package to operate with any
+%    other programs), even if The Copyright Holder or said other party
+%    has been advised of the possibility of such damages.
+%
+%    \subsection{Your comments}
+%
+%    If you have comments, suggestions, etc.\ about the
+%    \packlass{\bullcntr} package, please let me know them: I'll be
+%    happy to read what you think.  A point that especially bothers me
+%    is the difficulty of choosing the ``right'' character for the
+%    bullets: "\textbullet" seems too big, while "\textperiodcentered"
+%    looks far too small, at least for me.  But let me know your
+%    opinion!
+%
+% \section{How to use the \packlass{\bullcntr} package}
+% \label{S:UsageCntr}
+%
+%    The main purpose of the \packlass{\bullcntr} package is just to
+%    define the command "\bullcntr" for displaying the value of a
+%    counter.  This command is analogous to "\fnsymbol": it works only
+%    if the value of the counter to print lies between 1 and~9
+%    (inclusive), and displays this value using a pleasant arrangement
+%    of bullets (whence the name).  The patterns used to display the
+%    values from 1 to~9 are shown in fig.~\ref{fig:patterns}; of
+%    course, the grid lines shown in this picture are not drawn by the
+%    "\bullcntr" command.  See fig.~\ref{fig:dimens}, in
+%    Subsection~\ref{sS:MainCode}, for a definition of the exact
+%    proportions of this grid; here it suffices to state that the
+%    triangle in Three is exactly equilateral, and that the hexagon in
+%    Six and Seven is perfectly regular.  As it will be explained
+%    below, you can control what characters are drawn in the positions
+%    defined by the above patterns (not only bullets, but, for
+%    instance, hearts).
+%
+%    \begin{figure}[tbp]
+%      \newcommand*{\bullgrid}[1]{^^A
+%        \linethickness{.2pt}^^A
+%        \multiput(0,0)(.5,0){5}{\line(0,1){2}}^^A
+%        \multiput(0,0)(0,1){3}{\line(1,0){2}}^^A
+%        \put(0,\oMr){\line(1,0){2}}^^A
+%        \put(0,\oPr){\line(1,0){2}}^^A
+%        \put(1,-.1){\makebox(0,0)[t]{\strut #1}}^^A
+%      }
+%      \newcommand*{\bullbull}[2]{^^A
+%        \put(#1,#2){\circle*{.2}}^^A
+%      }
+%      \centering
+%      \setlength{\unitlength}{1cm}
+%      \begin{picture}(10,10.5)
+%        \put(1,9.5){\makebox(0,0){
+%          \begin{picture}(2,2)
+%            \bullgrid{One}
+%            \bullbull{1}{1}
+%          \end{picture}}}
+%        \put(5,9.5){\makebox(0,0){
+%          \begin{picture}(2,2)
+%            \bullgrid{Two}
+%            \bullbull{0}{1}
+%            \bullbull{2}{1}
+%          \end{picture}}}
+%        \put(9,9.5){\makebox(0,0){
+%          \begin{picture}(2,2)
+%            \bullgrid{Three}
+%            \bullbull{0}{\oMr}
+%            \bullbull{2}{\oMr}
+%            \bullbull{1}{\oPr}
+%          \end{picture}}}
+%        \put(1,5.5){\makebox(0,0){
+%          \begin{picture}(2,2)
+%            \bullgrid{Four}
+%            \bullbull{1}{0}
+%            \bullbull{0}{1}
+%            \bullbull{2}{1}
+%            \bullbull{1}{2}
+%          \end{picture}}}
+%        \put(5,5.5){\makebox(0,0){
+%          \begin{picture}(2,2)
+%            \bullgrid{Five}
+%            \bullbull{0}{0}
+%            \bullbull{0}{2}
+%            \bullbull{1}{1}
+%            \bullbull{2}{0}
+%            \bullbull{2}{2}
+%          \end{picture}}}
+%        \put(9,5.5){\makebox(0,0){
+%          \begin{picture}(2,2)
+%            \bullgrid{Six}
+%            \bullbull{.5}{\oMr}
+%            \bullbull{1.5}{\oMr}
+%            \bullbull{0}{1}
+%            \bullbull{2}{1}
+%            \bullbull{.5}{\oPr}
+%            \bullbull{1.5}{\oPr}
+%          \end{picture}}}
+%        \put(1,1.5){\makebox(0,0){
+%          \begin{picture}(2,2)
+%            \bullgrid{Seven}
+%            \bullbull{.5}{\oMr}
+%            \bullbull{1.5}{\oMr}
+%            \bullbull{0}{1}
+%            \bullbull{1}{1}
+%            \bullbull{2}{1}
+%            \bullbull{.5}{\oPr}
+%            \bullbull{1.5}{\oPr}
+%          \end{picture}}}
+%        \put(5,1.5){\makebox(0,0){
+%          \begin{picture}(2,2)
+%            \bullbull{0}{\oMr}
+%            \bullbull{1}{\oMr}
+%            \bullbull{2}{\oMr}
+%            \bullgrid{Eight}
+%            \bullbull{.5}{1}
+%            \bullbull{1.5}{1}
+%            \bullbull{0}{\oPr}
+%            \bullbull{1}{\oPr}
+%            \bullbull{2}{\oPr}
+%          \end{picture}}}
+%        \put(9,1.5){\makebox(0,0){
+%          \begin{picture}(2,2)
+%            \bullgrid{Nine}
+%            \bullbull{0}{0}
+%            \bullbull{0}{1}
+%            \bullbull{0}{2}
+%            \bullbull{1}{0}
+%            \bullbull{1}{1}
+%            \bullbull{1}{2}
+%            \bullbull{2}{0}
+%            \bullbull{2}{1}
+%            \bullbull{2}{2}
+%          \end{picture}}}
+%      \end{picture}
+%      \caption{Arrangement of the bullets for the various counter values}
+%      \label{fig:patterns}
+%    \end{figure}
+%
+%    The following subsections explain the usage of the
+%    \packlass{\bullcntr} package, which just defines---as said
+%    above---the new command "\bullcntr".  If you intend to produce
+%    lists whose items are numbered with bullets, however, you should
+%    \emph{not} use directly this package, but rather the
+%    \packlass{\bullenum} package, which will be discussed in
+%    Section~\ref{S:UsageEnum}.  The \packlass{\bullenum} package
+%    loads \packlass{bullcntr} for you, passing to the latter the
+%    options with which you called it.
+%
+%    The \packlass{\bullcntr} has been extensively rewritten to
+%    correct a coarse---and very embarassing!~:-(~---^^A ) paren match
+%    bug concerning references to counters displayed with "\bullcntr".
+%
+%    \subsection{Package invocation and options}
+%    \label{sS:InvoCntr}
+%
+%    You invoke the \packlass{\bullcntr} package with the usual
+%    "\usepackage" declaration put in the preamble of your document.
+%    In this declaration you may specify one of the following,
+%    mutually exclusive options:
+%^^A
+%    \begin{description}
+%^^A
+%    \item[\sopt{largectrbull}]
+%    (Relatively) ``large'' bullets are used for all values from 1
+%    through~9.  This produces exactly the same effect as a
+%    "\largectrbull" global declaration (see
+%    Subsection~\ref{sS:BullDecl}).
+%^^A
+%    \item[\sopt{smallctrbull}]
+%    ``Small'' bullets are used for all values from 1 to~9.  This has
+%    exactly the same effect as a "\smallctrbull" global declaration
+%    (see Subsection~\ref{sS:BullDecl}).
+%^^A
+%    \item[\sopt{smartctrbull}]
+%    (Relatively) ``large'' bullets are used for the values from 1
+%    through~5 (inclusive), while ``small'' bullets are used for those
+%    greater than or equal to~6.  This produces exactly the same
+%    effect as a "\smartctrbull" global declaration (see
+%    Subsection~\ref{sS:BullDecl}).
+%^^A
+%    \item[\sopt{heartctrbull}]
+%    Hearts are used (instead of bullets) for all values from 1
+%    through~9.  This produces exactly the same effect as a
+%    "\heartctrbull" global declaration (see
+%    Subsection~\ref{sS:BullDecl}).
+%^^A
+%    \end{description}
+%^^A
+%    If you don't specify any, the default option is
+%    \opt{smartctrbull}.
+%
+%    For example, when preparing a valentine you might want to say
+%\begin{verbatim}
+%\usepackage[heartctrbull]{bullcntr}
+%\end{verbatim}
+%    (See Subsection~\ref{sS:InvoEnum}, however, if what you need is
+%    to produce a list whose items are numbered with bullets.)
+%
+%    Finer control over the appearance of bullets may be obtained by
+%    means of the ``hooks'' described in Subsection~\ref{sS:BullHook}.
+%
+%    \subsection{The main command}
+%    \label{sS:bullcntr}
+%
+%    \DescribeMacro{\bullcntr}
+%    This command is strictly analogous to the "\fnsymbol" command
+%    (cf.\ the \textsl{\LaTeX book}
+%    \cite[Subsection~C.8.4]{LaTeXbook}): you may use it directly in
+%    the text, as in
+%    \begin{flushleft}
+%      \small
+%      \ldots\texttt{the counter value displays as}"~\bullcntr{"\meta{ctr}"}"\ldots
+%    \end{flushleft}
+%    (where \meta{ctr} is a counter name, defined with "\newcounter"),
+%    or you may redefine the "\the"\meta{ctr} command, as in
+%    \begin{flushleft}
+%      \small
+%      "\renewcommand*{\the"\meta{ctr}"}{\bullcntr{"\meta{ctr}"}}"
+%    \end{flushleft}
+%    By way of example, in the case of a counter named \ctr{myctr},
+%    the source code in the two cases would be, respectively,
+%\begin{verbatim}
+%The counter value displays as~\bullcntr{myctr}.
+%\end{verbatim}
+%    and
+%\begin{verbatim}
+%\renewcommand*{\themyctr}{\bullcntr{myctr}}
+%\end{verbatim}
+%
+%    If \( "\value{"\meta{ctr}"}"=0 \), the command
+%    "\bullcntr{"\meta{ctr}"}" tacitly typesets nothing (not even a
+%    space); if \( "\value{"\meta{ctr}"}"<0 \) or \(
+%    "\value{"\meta{ctr}"}">9 \), an error occurs.
+%
+%    \subsection{Hooks for the bullets}
+%    \label{sS:BullHook}
+%
+%    The main task of the \packlass{\bullcntr} package is to calculate
+%    the position of the ``bullets'' used to display the value of the
+%    given counter (see fig.~\ref{fig:patterns}); but you are free to
+%    decide what characters are actually drawn in these positions:
+%    they need not necessarily be ``bullets''.  Indeed, two ``hooks''
+%    are provided in the package to define the actual characters
+%    employed, and the package simply invokes these hooks.
+%
+%    \DescribeMacro{\counterlargebullet}
+%    When the value of the counter being displayed is less than~6
+%    (less than~6 bullets need to be drawn), the "\bullcntr" command
+%    invokes the "\counterlargebullet" macro to draw each of them.  If
+%    you want, you should redefine this macro (using "\renewcommand")
+%    so that it generates a symbol suitable for arrangements in which
+%    the ``bullets'' are relatively spaced out.  For example,
+%\begin{verbatim}
+%\renewcommand*{\counterlargebullet}{\textbullet}
+%\end{verbatim}
+%    You don't \emph{need} to redefine this command: a convenient
+%    default definition is already set by the \packlass{\bullcntr}
+%    package itself.
+%
+%    \DescribeMacro{\countersmallbullet}
+%    When, on the other hand, the value of the counter being displayed
+%    is greater than or equal to~6 (6~or more bullets need to be
+%    drawn), the "\bullcntr" command calls the "\countersmallbullet"
+%    macro.  It is intended that this macro typesets a character
+%    suitable for situations in which the ``bullets'' have to be
+%    grouped in a compact cluster; typically, this means that a
+%    smaller ``bullet'' is used than the one typeset by
+%    "\counterlargebullet", although it is perfectly in order to use
+%    the same character in both situations.  If you want (but you
+%    don't \emph{need} to do this, since the \packlass{\bullcntr}
+%    package already defines this macro) you may change the definition
+%    with "\renewcommand", \emph{e.g.}:
+%\begin{verbatim}
+%\renewcommand*{\countersmallbullet}{\textperiodcentered}
+%\end{verbatim}
+%
+%    Fragile commands used in the definition of both hooks should be
+%    "\protect"'ed.
+%
+%    ``Macho \TeX\ programmers'' may also use "\def" instead of
+%    "\renewcommand", \emph{e.g.}:
+%\begin{verbatim}
+%\def\counterlargebullet{\textbullet}
+%\def\countersmallbullet{\textperiodcentered}
+%\end{verbatim}
+%    (Actually, in a case like this, even "\let" could be used.)
+%
+%    \subsection{Declarations for predefined bullet styles}
+%    \label{sS:BullDecl}
+%
+%    To spare you the nuisance of redefining the two hooks mentioned
+%    in Subsection~\ref{sS:BullHook}, at least in normal situations,
+%    four basic ``bullet styles'' are already predefined by the
+%    \packlass{\bullcntr} package, covering what the author believes
+%    are the most common cases.  You can switch to any of these
+%    predefined styles by means of the following four declarations.
+%
+%    \DescribeMacro{\largectrbull}
+%    This declaration causes (relatively) ``large'' bullets to be used
+%    for all values from 1 to~9.
+%
+%    \DescribeMacro{\smallctrbull}
+%    This declaration causes ``small'' bullets to be used for all
+%    values from 1 to~9.
+%
+%    \DescribeMacro{\smartctrbull}
+%    This declaration causes (relatively) ``large'' bullets to be used
+%    for values from 1 to~5 (inclusive), and ``small'' bullets for
+%    values equal to or above~6.
+%
+%    \DescribeMacro{\heartctrbull}
+%    With this declaration, little hearts will be used for all values
+%    from 1 to~9.
+%
+%    These are in all respects normal declarations, obeying to
+%    ordinary scoping rules.  The corresponding options described in
+%    Subsection~\ref{sS:InvoCntr} simply set the style at the outer
+%    (global, or document-wide) level.
+%
+% \section{How to use the \packlass{\bullenum} package}
+% \label{S:UsageEnum}
+%
+%    The \packlass{\bullcntr} package was conceived for the purpose of
+%    imitating in print an unusual way of numbering items in a list,
+%    that the author saw in certain handwritten notes (see the
+%    Introduction).  With the "\bullcntr" command at hand, this could
+%    be achieved simply by saying something like
+%\begin{verbatim}
+%\begin{enumerate}
+%    \renewcommand*{\theenumi}{\bullcntr{enumi}}
+%    \renewcommand*{\labelenumi}{\theenumi}
+%\end{verbatim}
+%    \begin{flushleft}
+%      \small
+%      \texttt{\ \ \ \ }\meta{items}
+%    \end{flushleft}
+%\begin{verbatim}
+%\end{enumerate}
+%\end{verbatim}
+%    This, nonetheless, is not perfect, since it breaks if the
+%    \env{enumerate} environment is moved inside another
+%    \env{enumerate}, because of the explicit mention of "\theenumi"
+%    and of "\labelenumi".
+%
+%    For this reason, and also to facilitate the use of the
+%    "\bullcntr" command for numbering list items, an ancillary
+%    package has been added to the \packlass{\bullcntr} package; this
+%    ancillary package, called \packlass{\bullenum}, simply defines
+%    the \env{bullenum} environment, a variation of \env{enumerate}
+%    which numbers its items using the "\bullcntr" command.  Indeed,
+%\begin{verbatim}
+%\begin{bullenum}
+%\end{verbatim}
+%    \begin{flushleft}
+%      \small
+%      \texttt{\ \ \ \ }\meta{items}
+%    \end{flushleft}
+%\begin{verbatim}
+%\end{bullenum}
+%\end{verbatim}
+%    is equivalent to
+%    \begin{flushleft}
+%      \small
+%      "\begin{enumerate}"\\
+%      "    \renewcommand*{\theenum"\meta{lvl}"}{\bullcntr{enum"\meta{lvl}"}}"\\
+%      "    \renewcommand*{\labelenum"\meta{lvl}"}{\theenum"\meta{lvl}"}"
+%    \end{flushleft}
+%    \begin{flushleft}
+%      \small
+%      \texttt{\ \ \ \ }\meta{items}\\[\topsep]
+%    \end{flushleft}
+%\begin{verbatim}
+%\end{enumerate}
+%\end{verbatim}
+%    where \meta{lvl} is \texttt{i}, \texttt{ii}, \texttt{iii},
+%    or~\texttt{iv}, depending on the current level of the
+%    \env{enumerate} environment.
+%
+%    In other words, \env{bullenum} can be used in every place where
+%    \env{enumerate} can, and numbers its items with an increasing
+%    number of bullets, regardless of the current definition of
+%    "\theenum"\meta{lvl} and "\labelenum"\meta{lvl}.  Of course, the
+%    environment must contain no more than 9~items.  Moreover, if you
+%    use "\label" to set up a reference, subsequent "\ref"'s will
+%    typeset the reference as a ``bulletted'' number, using, for the
+%    ``bullets'', the character that was current at the time the
+%    "\label" was encountered (in brief, they will do the right
+%    thing).
+%
+%    Notice that you should \emph{not} load the \packlass{\bullcntr}
+%    package if you invoke \packlass{\bullenum}, because the latter
+%    calls the former.  As explained below, you may pass to
+%    \packlass{\bullenum} the options that you would require from
+%    \packlass{\bullcntr}: the outer package will forward them to the
+%    inner one.  Actually, most users will just use the
+%    \packlass{\bullenum} package, and never call \packlass{\bullcntr}
+%    directly.
+%
+%    \subsection{Package invocation and options}
+%    \label{sS:InvoEnum}
+%
+%    You invoke the \packlass{\bullenum} package with the usual
+%    "\usepackage" declaration put in the preamble of your document.
+%    In this declaration you may specify exactly the same options that
+%    you would pass to the \packlass{\bullcntr} package, with the same
+%    meaning.  The \packlass{\bullenum} package calls
+%    \packlass{bullcntr} for you, just passing on to it the options
+%    you asked for.
+%
+%    Continuing our example of valentines: if what you actually want
+%    is to produce a list numbered with hearts, you should \emph{not}
+%    say
+%\begin{verbatim}
+%\usepackage[heartctrbull]{bullcntr}
+%\end{verbatim}
+%    as deceitfully suggested in Subsection~\ref{sS:InvoCntr} (well,
+%    actually we had not spoken of lists there, had we?), but rather
+%\begin{verbatim}
+%\usepackage[heartctrbull]{bullenum}
+%\end{verbatim}
+%
+%    \subsection{The main environment}
+%    \label{sS:bullenum}
+%
+%    \DescribeEnv{bullenum}
+%    This environment is syntactically analogous to \env{enumerate},
+%    but numbers its items with an increasing number of bullets (using
+%    the "\bullcntr" command).  You must include no more than 9~items
+%    in this environment.  The style of the bullets is governed by the
+%    declarations described in Subsection~\ref{sS:BullDecl}, according
+%    to ordinary scoping rules.  A change local to the environment
+%    being employed can be obtained by simply enclosing the relevant
+%    declaration inside the environment itself; \emph{e.g.},
+%\begin{verbatim}
+%\begin{bullenum}
+%    \smallctrbull
+%\end{verbatim}
+%    \begin{flushleft}
+%      \small
+%      \texttt{\ \ \ \ }\meta{items}
+%    \end{flushleft}
+%\begin{verbatim}
+%\end{bullenum}
+%\end{verbatim}
+%    will use ``small'' bullets regardless of whatever style might
+%    have been in force outside the \env{bullenum} environment.
+%
+%    If you want finer control over the appearance of the ``bullets'',
+%    just redefine the hooks of
+%    Subsection~\ref{sS:BullHook}; doing this inside the environment
+%    itself will keep changes to the hooks local.  For example, you
+%    might say
+%\begin{verbatim}
+%\begin{bullenum}
+%    \renewcommand*{\counterlargebullet}{$\scriptscriptstyle \diamondsuit$}
+%    \renewcommand*{\countersmallbullet}{\counterlargebullet}
+%\end{verbatim}
+%    \begin{flushleft}
+%      \small
+%      \texttt{\ \ \ \ }\meta{items}
+%    \end{flushleft}
+%\begin{verbatim}
+%\end{bullenum}
+%\end{verbatim}
+%    (yes, ``macho \TeX\ programmers'' may also use "\def", or "\let"
+%    where appropriate).
+%
+%    Of course, this environment does not affect the definition of
+%    "\theenum"\meta{lvl} and of "\labelenum"\meta{lvl} that are valid
+%    outside the environment itself, for \( \meta{lvl} =
+%    \texttt{i}\ldots\texttt{iv} \).
+%
+% \StopEventually{
+%    \setcounter{secnumdepth}{0}
+%    \providecommand*\bysame{\leavevmode\hbox to3em{\hrulefill}\thinspace}
+%
+%    \clearpage
+%    \begin{thebibliography}{9}
+%    \addcontentsline{toc}{section}{\refname}
+%
+%    \bibitem{LaTeXbook}
+%    L.~Lamport, \emph{\LaTeX---A Document Preparation System---User's
+%       Guide and Reference Manual}, 2nd~edition, Addison-Wesley,
+%       Reading, 1994.
+%
+%    \end{thebibliography}
+% }
+%
+%
+%
+% \clearpage
+% \part{Implementation}
+%
+% \section{About this part}
+%
+%    This part is of interest only to \LaTeX\ hackers; to avoid
+%    having this part printed, look in the file \filedir{\filename}
+%    for a line that looks \emph{exactly} like this
+%    \begin{verbatim}%% \OnlyDescription % uncomment to discard Implementation part\end{verbatim}
+%    and remove the two leading percent signs ("%%").
+%
+% \section{A driver for this document}
+%
+%    This part of the file is \emph{not} included in any generated file:
+%    it is simply the driver.
+%    \begin{macrocode}
+%<*driver>
+%    \end{macrocode}
+%
+%    To begin with, we load the \packlass{ltxdoc} class.
+%    \begin{macrocode}
+\documentclass[a4paper]{ltxdoc}
+%    \end{macrocode}
+%    We now set a few typesetting options.
+%    First of all, we want a history listing and a full index, the latter
+%    organized by line numbers.
+%    \begin{macrocode}
+\RecordChanges
+\EnableCrossrefs
+\CodelineIndex
+%    \end{macrocode}
+%    If you don't want to include the second part of this document,
+%    \emph{Implementation}, uncomment the line containing the command
+%    "\OnlyDescription".
+%    \begin{macrocode}
+%% \OnlyDescription % uncomment to discard Implementation part
+%    \end{macrocode}
+%    Finally, setting "\hfuzz" and "\vfuzz" to 0~points is only one
+%    of the many neurotic symptoms of the author!
+%    \begin{macrocode}
+\hfuzz = 0pt
+\vfuzz = 0pt
+%    \end{macrocode}
+%    Now input this same file, using \DS\ conventions.
+%    \begin{macrocode}
+\begin{document}
+  \DocInput{bullcntr.dtx}
+%    \end{macrocode}
+%    Then print the change list and the index.  We put these commands in
+%    the driver, rather than in the comments of this file, because
+%    producing the change list and the index is somewhat cumbersome, and some
+%    users could prefer to omit them: such users should simply use a
+%    different driver.
+%    \begin{macrocode}
+  % \clearpage % attach Change History below References
+  \PrintChanges
+  \clearpage \PrintIndex
+%    \end{macrocode}
+%    When this file is read directly by \LaTeX\ without the intervention
+%    of \DS, the following line will make \TeX\ stop
+%    reading.
+%    \begin{macrocode}
+\end{document}
+%    \end{macrocode}
+%    End of driver module.
+%    \begin{macrocode}
+%</driver>
+%    \end{macrocode}
+%
+% \section{The code for the \packlass{\bullcntr} package}
+%
+%    This part of the file goes into \filedir{\bullcntr.sty}.
+%    \begin{macrocode}
+%<*bullcntr>
+%    \end{macrocode}
+%
+%    \subsection{Identification}
+%
+%    The usual identification.  Is there a real need for this version
+%    of \LaTeXe?
+%    \begin{macrocode}
+\NeedsTeXFormat{LaTeX2e}[1998/06/01] % LaTeX2e is required!
+\ProvidesPackage{bullcntr}
+                [2007/04/02 v0.04 (**development**)]
+%    \end{macrocode}
+%
+%    \subsection{Initial code}
+%
+%    The code pertaining to the bullet styles is needed in the option
+%    processing phase, so it must be defined here.
+%
+%    \subsubsection{Hooks for the bullets}
+%    \label{sS:BullHookImpl}
+%
+%    Here we set the default definitions.  Actually, these defaults
+%    will be re-established (or possibly changed, in future versions)
+%    by "\ExecuteOptions", below; nonetheless, I think it's always
+%    better to do things twice than to run the risk of not doing them
+%    at all!
+%
+%    \begin{macro}{\counterlargebullet}
+%    The \packlass{\bullcntr} package invokes this macro to draw the
+%    bullets, when the value of the counter being displayed is less
+%    than six.  The default definition is a "\bullet" in script
+%    style~($\scriptstyle\bullet$), but the user is free to change it
+%    with "\renewcommand" (macho \TeX\ programmers may also use
+%    "\def", or even "\let").
+%    \begin{macrocode}
+\newcommand*\counterlargebullet{$\scriptstyle \bullet$}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\countersmallbullet}
+%    This is the command invoked to draw the bullets when the value of
+%    the counter being displayed is greater or equal than six.
+%    Defaults to a "\bullet" in scriptscript
+%    style~($\scriptscriptstyle \bullet$), but may be changed with
+%    "\renewcommand" (or "\def", or "\let").
+%    \begin{macrocode}
+\newcommand*\countersmallbullet{$\scriptscriptstyle \bullet$}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    The question arises, whether these definitions are appropriate.
+%    Their main drawback is that they bypass the machinery set up for
+%    using symbols from an extended character set when they are
+%    available.  The problem is that "\textbullet" is simply too
+%    large, and "\textperiodcentered" far too small\ldots
+%
+%    Precautions have been taken to assure that these macros are
+%    \emph{fully} expanded, without stopping to the first-level
+%    expansion, when a reference to a counter displayed using
+%    "\bullcntr" is generated.  This is important in situations in
+%    which the user has done something like this (which looks
+%    absolutely natural):
+%^^A
+%    \begin{flushleft}
+%      \small
+%      "\renewcommand*{\counterlargebullet}{"\meta{some code}"}"\\
+%      "\renewcommand*{\countersmallbullet}{\counterlargebullet}"
+%    \end{flushleft}
+%^^A
+%    If "\countersmallbullet" were expanded just to the first level,
+%    this would result in using the definition of
+%    "\counterlargebullet" that is in force when the \emph{reference},
+%    and not the counter value, is typeset.
+%
+%    \subsubsection{Declarations for predefined bullet styles}
+%
+%    Each of the following commands, intended to be used as a
+%    declaration without arguments, sets a convenient definition for
+%    the hooks defined in Subsection~\ref{sS:BullHookImpl}.
+%
+%    \begin{macro}{\heartctrbull}
+%    Use hearts for all values from 1 to~9.
+%    \begin{macrocode}
+\newcommand*\heartctrbull{%
+  \def\counterlargebullet{$\scriptscriptstyle \heartsuit$}%
+  \let\countersmallbullet\counterlargebullet
+}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\smallctrbull}
+%    Use ``small'' bullets for all values from 1 to~9.
+%    \begin{macrocode}
+\newcommand*\smallctrbull{%
+  \def\counterlargebullet{$\scriptscriptstyle \bullet$}%
+  \let\countersmallbullet\counterlargebullet
+}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\largectrbull}
+%    Use ``large'' bullets for all values from 1 to~9.
+%    \begin{macrocode}
+\newcommand*\largectrbull{%
+  \def\counterlargebullet{$\scriptstyle \bullet$}%
+  \let\countersmallbullet\counterlargebullet
+}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\smartctrbull}
+%    Use ``large'' bullets for values from 1 to~5, and ``small'' ones
+%    for values from 6 to~9.
+%    \begin{macrocode}
+\newcommand*\smartctrbull{%
+  \def\counterlargebullet{$\scriptstyle \bullet$}%
+  \def\countersmallbullet{$\scriptscriptstyle \bullet$}
+}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \subsection{Declaration of options}
+%
+%    As a general rule, options pertaining to the same functional group
+%    are declared in reverse order of desirability, the default option of
+%    the group being declared last.  This assures that if more than
+%    one option of the same group is erroneously asked for by the
+%    user, the ``most desirable'' one (whatever this means) is
+%    executed last, thereby remaining in effect.
+%
+%    Here we just have the options for setting the bullet style.  Each
+%    of them simply invokes its corresponding declaration.
+%
+%    \begin{macrocode}
+\DeclareOption{heartctrbull}{\heartctrbull}
+\DeclareOption{smallctrbull}{\smallctrbull}
+\DeclareOption{largectrbull}{\largectrbull}
+\DeclareOption{smartctrbull}{\smartctrbull}
+%    \end{macrocode}
+%
+%    \subsection{Option processing}
+%
+%    Nothing special to note here.
+%
+%    \begin{macrocode}
+\ExecuteOptions{smartctrbull}
+\ProcessOptions\relax
+%    \end{macrocode}
+%
+%    \subsection{Package loading}
+%
+%    This package requires no helper packages.
+%
+%    \subsection{Main code}
+%    \label{sS:MainCode}
+%
+%    Fig.~\ref{fig:dimens} shows the exact (theoretical) dimensions of
+%    the grid used to place the bullets; we already saw in
+%    fig.~\ref{fig:patterns}, in Section~\ref{S:UsageCntr}, on which
+%    nodes of this grid the bullets are placed for each value of the
+%    counter being displayed.  The grid is used assuming a unit of
+%    measure equal to 1~ex.
+%
+%    \begin{figure}[tbp]
+%      \centering
+%        \setlength{\unitlength}{3cm}
+%        \begin{picture}(3.1666667,3.2)(0,-.8333333)
+%          \thicklines
+%          \multiput(0,0)(.5,0){5}{\line(0,1){2}}
+%          \multiput(0,0)(0,1){3}{\line(1,0){2}}
+%          \put(0,\oMr){\line(1,0){2}}
+%          \put(0,\oPr){\line(1,0){2}}
+%          \linethickness{.2pt}
+%          \multiput(0,0)(2,0){2}{\line(0,-1){.77}}
+%          \multiput(.5,0)(.5,0){3}{\line(0,-1){.43}}
+%          \multiput(.3,-.3333333)(.5,0){4}{\vector(-1,0){.3}}
+%          \multiput(.2,-.3333333)(.5,0){4}{\vector(1,0){.3}}
+%          \multiput(.25,-.5)(.5,0){4}{\makebox(0,0)[b]{$\frac{1}{2}$}}
+%          \put(1.5,-.6666667){\vector(-1,0){1.5}}
+%          \put(.5,-.6666667){\vector(1,0){1.5}}
+%          \put(1,-.6666667){\makebox(0,0)[t]{\strut $2$}}
+%          \multiput(2,0)(0,2){2}{\line(1,0){1.1}}
+%          \put(2,\oMr){\line(1,0){.43}}
+%          \put(2,\oPr){\line(1,0){.43}}
+%          \put(2,1){\line(1,0){.77}}
+%          \put(2.3333333,.7){\vector(0,-1){.5660254}}
+%          \put(2.3333333,.3){\vector(0,1){.7}}
+%          \put(2.3333333,1.7){\vector(0,-1){.7}}
+%          \put(2.3333333,1.3){\vector(0,1){.5660254}}
+%          \put(2.3333333,.5669873){\makebox(0,0)[l]{$\,\frac{\sqrt{3}}{2}$}}
+%          \put(2.3333333,1.4330127){\makebox(0,0)[l]{$\,\frac{\sqrt{3}}{2}$}}
+%          \multiput(2.6666667,.4)(0,1){2}{\vector(0,1){.6}}
+%          \multiput(2.6666667,.6)(0,1){2}{\vector(0,-1){.6}}
+%          \multiput(2.6666667,.5)(0,1){2}{\makebox(0,0)[l]{$\,1$}}
+%          \put(3,.5){\vector(0,1){1.5}}
+%          \put(3,1.5){\vector(0,-1){1.5}}
+%          \put(3,1){\makebox(0,0)[l]{$\,2$}}
+%          \multiput(0,2)(.5,0){5}{\line(0,1){.1666667}}
+%          \multiput(0,2.2666667)(.5,0){5}{\circle{.2}}
+%          \put(0  ,2.2666667){\makebox(0,0){1}}
+%          \put( .5,2.2666667){\makebox(0,0){2}}
+%          \put(1  ,2.2666667){\makebox(0,0){3}}
+%          \put(1.5,2.2666667){\makebox(0,0){4}}
+%          \put(2  ,2.2666667){\makebox(0,0){5}}
+%        \end{picture}
+%      \caption{Dimensions of the grid defining the position of the bullets}
+%      \label{fig:dimens}
+%    \end{figure}
+%
+%    \subsubsection{Basic drawing macros}
+%
+%    \begin{macro}{\@b@ll@box}
+%    The task of this macro is simply to hide its argument in a
+%    zero-dimensional box.  I know, \LaTeX\ kernel commands should be
+%    used for this purpose, but\ldots
+%    \begin{macrocode}
+\@ifdefinable\@b@ll@box{\def\@b@ll@box#1{%
+  \hb@xt@ \z@ {%
+    \hss\vbox to \z@ {%
+      \vss\hbox{#1}\vss
+    }\hss
+  }%
+}}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\@b@ll@kernem}
+%    Two convenient abbreviations for sparing tokens in subsequent
+%    macros: the first\ldots
+%    \begin{macrocode}
+\@ifdefinable\@b@ll@kernem{\def\@b@ll@kernem{\kern 1ex }}
+%    \end{macrocode}
+%    \end{macro}
+%    \begin{macro}{\@b@ll@kernen}
+%    \ldots\ and the second.
+%    \begin{macrocode}
+\@ifdefinable\@b@ll@kernen{\def\@b@ll@kernen{\kern .5ex }}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\@b@ll@full@row}
+%    This macro constructs a zero-height (and zero-depth) "\hbox" with
+%    three inner zero-dimensional boxes, each containing one of the
+%    three arguments.  These inner boxes are spaced out so as to place
+%    them in the columns marked \circnumb{1}, \circnumb{3}
+%    and~\circnumb{5} in fig.~\ref{fig:dimens}.  The idea is that this
+%    macro produces a row of bullets.
+%    \begin{macrocode}
+\@ifdefinable\@b@ll@full@row{\def\@b@ll@full@row#1#2#3{%
+  \hbox{%
+    \thinspace
+    \@b@ll@box{#1}%
+    \@b@ll@kernem
+    \@b@ll@box{#2}%
+    \@b@ll@kernem
+    \@b@ll@box{#3}%
+    \thinspace
+  }%
+}}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\@b@ll@half@row}
+%    This macro is similar to "\@b@ll@full@row": it produces a row of
+%    bullets as well, but with only two boxes, that end up in the
+%    columns marked \circnumb{2} and~\circnumb{4} in
+%    fig.~\ref{fig:dimens}.
+%    \begin{macrocode}
+\@ifdefinable\@b@ll@half@row{\def\@b@ll@half@row#1#2{%
+  \hbox{%
+    \thinspace\@b@ll@kernen
+    \@b@ll@box{#1}%
+    \@b@ll@kernem
+    \@b@ll@box{#2}%
+    \thinspace\@b@ll@kernen
+  }%
+}}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\@b@ll@full@skip}
+%    When the rows produced by "\@b@ll@full@row" or by
+%    "\@b@ll@half@row" are being stacked to compose the desired
+%    pattern, this macro is invoked to separate them with a vertical
+%    space of $1$~unit (that is, $1$~ex).
+%    \begin{macrocode}
+\@ifdefinable\@b@ll@full@skip{\def\@b@ll@full@skip{%
+  \vskip 1ex \relax
+}}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\@b@ll@redu@skip}
+%    Similar to the above, but the vertical space measures
+%    $\frac{\sqrt{3}}{2}$~units (that is, $\frac{\sqrt{3}}{2}$~ex).
+%    \begin{macrocode}
+\@ifdefinable\@b@ll@redu@skip{\def\@b@ll@redu@skip{%
+  \vskip .866025403785ex \relax
+}}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \subsubsection{Macros for drawing the bullet patterns}
+%
+%    When setting a reference, "\@currentlabel" is set by means of a
+%    (protected) "\edef"; hence, if we have redefined "\the"\meta{ctr}
+%    (where \meta{ctr} is the counter being referenced) as
+%    "\bullcntr{"\meta{ctr}"}", the "\bullcntr" command is expanded,
+%    and indeed \emph{has} to be expanded (so, defining it with
+%    "\DeclareRobustCommand" is absolutely pointless).  In previous
+%    versions, this command broke down miserably in such circumstance.
+%    So, let us rethink the whole thing with more ponderation, trying
+%    not to confuse expansion and digestion like a newbie.
+%
+%    The general idea runs as depicted in the following list.
+%
+%    \begin{enumerate}
+%
+%    \item
+%    "\bullcntr" calls "\@b@ll@cntr", converting the counter name into
+%    the corresponding internal register (expansion).
+%
+%    \item\label{item:b@ll@}
+%    "\@b@ll@cntr" tests whether the counter value is below~6
+%    (expansion) and calls "\@b@ll@@cntr" passing the appropriate
+%    "\counter"$\,*\,$\texttt{bullet} command.
+%
+%    \item\label{item:b@ll@@}
+%    "\@b@ll@@cntr" selects which pattern to draw, depending on the
+%    counter value (expansion), and calls the appropriate macro among
+%    the ones defined below.  At this point the call could also be
+%    "\protect"'ed, since no further expansion is required, when
+%    setting a reference, in order to select the correct number (and
+%    type) of bullets.  The "\@b@ll@@cntr" macro receives in~\#1 the
+%    macro to be used to draw the bullets and in~\#2 the internal
+%    count register.
+%
+%    \item
+%    "\ensuremath" and everything that has to be digested is put in
+%    the macros defined below.
+%
+%    \end{enumerate}
+%
+%    Steps \ref{item:b@ll@} and~\ref{item:b@ll@@} could be combined,
+%    thus eliminating one macro, but I feel that the code is more
+%    readable if the two steps are kept separate.
+%
+%    We continue our bottom-up approach in ordering the macro
+%    definitions.
+%
+%    \begin{macro}{\@b@ll@vcent}
+%    The command that ultimately does the typesetting.  It might be
+%    called either from outside or from inside math mode; so
+%    "\ensuremath" for the "\vcenter" that aligns the box of bullets
+%    on the math axis.  The boxes themselves are produced by the
+%    macros passed in argument~\#1.
+%    \begin{macrocode}
+\@ifdefinable\@b@ll@vcent{\def\@b@ll@vcent#1{%
+  \ensuremath{\vcenter{\offinterlineskip #1}}%
+}}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    A series of macros follows, each of which typesets a specific
+%    bullet pattern.  They all invoke "\@b@ll@vcent", passing in its
+%    argument the appropriate macros.  In their own argument, they
+%    receive the code that has to be employed to produce the bullets
+%    (the \emph{expansion} of "\counter"$\,*\,$\texttt{bullet}).  To
+%    avoid proliferation of macros, we do not define them with
+%    "\DeclareRobustCommand"; rather, we shall "\protect" them when
+%    invoking them, below.  (\emph{Begin to think:} why not to make
+%    these macros accessible at the user level, calling them,
+%    \emph{e.g.}, "\bullcntrone", "\bullcntrtwo", etc.?  In this case,
+%    "\DeclareRobustCommand" could be considered.)
+%
+%    \begin{macro}{\@b@ll@one}
+%    Macro for value~1.  Just one row with a bullet in the middle:
+%    \begin{macrocode}
+\@ifdefinable\@b@ll@one{\def\@b@ll@one#1{\@b@ll@vcent{%
+  \@b@ll@full@row{}{#1}{}%
+}}}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\@b@ll@two}
+%    Macro for value~2.  Just one row with two bullets at both ends:
+%    \begin{macrocode}
+\@ifdefinable\@b@ll@two{\def\@b@ll@two#1{\@b@ll@vcent{%
+  \@b@ll@full@row{#1}{}{#1}%
+}}}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\@b@ll@three}
+%    Macro for value~3.  One row with a centered bullet and one with
+%    two bullets at the ends, separated by a vertical space of
+%    $\sqrt{3}$~units:
+%    \begin{macrocode}
+\@ifdefinable\@b@ll@three{\def\@b@ll@three#1{\@b@ll@vcent{%
+  \@b@ll@full@row{}{#1}{}%
+  \@b@ll@redu@skip
+  \@b@ll@redu@skip
+  \@b@ll@full@row{#1}{}{#1}%
+}}}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\@b@ll@four}
+%    And so on: macro for value~4\ldots
+%    \begin{macrocode}
+\@ifdefinable\@b@ll@four{\def\@b@ll@four#1{\@b@ll@vcent{%
+  \@b@ll@full@row{}{#1}{}%
+  \@b@ll@full@skip
+  \@b@ll@full@row{#1}{}{#1}%
+  \@b@ll@full@skip
+  \@b@ll@full@row{}{#1}{}%
+}}}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\@b@ll@five}
+%    \ldots for value~5\ldots
+%    \begin{macrocode}
+\@ifdefinable\@b@ll@five{\def\@b@ll@five#1{\@b@ll@vcent{%
+  \@b@ll@full@row{#1}{}{#1}%
+  \@b@ll@full@skip
+  \@b@ll@full@row{}{#1}{}%
+  \@b@ll@full@skip
+  \@b@ll@full@row{#1}{}{#1}%
+}}}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\@b@ll@six}
+%    \ldots for~6\ldots
+%    \begin{macrocode}
+\@ifdefinable\@b@ll@six{\def\@b@ll@six#1{\@b@ll@vcent{%
+  \@b@ll@half@row{#1}{#1}%
+  \@b@ll@redu@skip
+  \@b@ll@full@row{#1}{}{#1}%
+  \@b@ll@redu@skip
+  \@b@ll@half@row{#1}{#1}%
+}}}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\@b@ll@seven}
+%    \ldots 7\ldots
+%    \begin{macrocode}
+\@ifdefinable\@b@ll@seven{\def\@b@ll@seven#1{\@b@ll@vcent{%
+  \@b@ll@half@row{#1}{#1}%
+  \@b@ll@redu@skip
+  \@b@ll@full@row{#1}{#1}{#1}%
+  \@b@ll@redu@skip
+  \@b@ll@half@row{#1}{#1}%
+}}}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\@b@ll@eight}
+%    \ldots 8\ldots
+%    \begin{macrocode}
+\@ifdefinable\@b@ll@eight{\def\@b@ll@eight#1{\@b@ll@vcent{%
+  \@b@ll@full@row{#1}{#1}{#1}%
+  \@b@ll@redu@skip
+  \@b@ll@half@row{#1}{#1}%
+  \@b@ll@redu@skip
+  \@b@ll@full@row{#1}{#1}{#1}%
+}}}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\@b@ll@nine}
+%    \ldots and~9:
+%    \begin{macrocode}
+\@ifdefinable\@b@ll@nine{\def\@b@ll@nine#1{\@b@ll@vcent{%
+  \@b@ll@full@row{#1}{#1}{#1}%
+  \@b@ll@full@skip
+  \@b@ll@full@row{#1}{#1}{#1}%
+  \@b@ll@full@skip
+  \@b@ll@full@row{#1}{#1}{#1}%
+}}}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \subsubsection{The main command}
+%
+%    \begin{macro}{\bullcntr}
+%    User-level command: simply invokes its inner-level counterpart,
+%    using the internal name of the counter (the \meta{countdef
+%    token}, right below).
+%    \begin{macrocode}
+\newcommand*\bullcntr[1]{\expandafter\@b@ll@cntr\csname c@#1\endcsname}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\@b@ll@cntr}
+%    This macro expands either to
+%    \begin{center}
+%      "\@b@ll@@cntr \counterlargebullet "\meta{countdef token}
+%    \end{center}
+%    or to
+%    \begin{center}
+%      "\@b@ll@@cntr \countersmallbullet "\meta{countdef token}
+%    \end{center}
+%    depending on the counter value.  Note that \#1 must be a single
+%    token (as it is).
+%    \begin{macrocode}
+\@ifdefinable\@b@ll@cntr{\def\@b@ll@cntr#1{%
+  \expandafter\expandafter\expandafter \@b@ll@@cntr
+  \ifnum #1<6
+    \expandafter\counterlargebullet
+  \else
+    \expandafter\countersmallbullet
+  \fi
+  #1%
+}}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    \begin{macro}{\@b@ll@@cntr}
+%    This macro selects the pattern to draw.  The following is a
+%    typical switch on the counter value, but pay attention to the
+%    "\protect"\slash "\expandafter" mechanism: after this macro, and
+%    hence the "\ifcase", have been expanded, the token flow will look
+%    like this (if the value of the counter is, say, 2 and the
+%    argument passed in~\#1 is, consequently, "\counterlargebullet"):
+%    \begin{center}
+%      "\protect \@b@ll@two {\counterlargebullet }"
+%    \end{center}
+%    Therefore, in the context of a "\protected@edef", the
+%    "\protect"'ed "\@b@ll@two" will not be expanded, but
+%    "\counterlargebullet" will be (fully).
+%    \changes{0.04}{2007/04/02}{Corrected erroneous behavior for case~0,
+%      argument \#1 must be \protect\cmnd{@gobble}'d in this case}
+%    \begin{macrocode}
+\@ifdefinable\@b@ll@@cntr{\def\@b@ll@@cntr#1#2{%
+  \ifcase #2\expandafter\@gobble
+  \or
+    \expandafter\protect \expandafter\@b@ll@one
+  \or
+    \expandafter\protect \expandafter\@b@ll@two
+  \or
+    \expandafter\protect \expandafter\@b@ll@three
+  \or
+    \expandafter\protect \expandafter\@b@ll@four
+  \or
+    \expandafter\protect \expandafter\@b@ll@five
+  \or
+    \expandafter\protect \expandafter\@b@ll@six
+  \or
+    \expandafter\protect \expandafter\@b@ll@seven
+  \or
+    \expandafter\protect \expandafter\@b@ll@eight
+  \or
+    \expandafter\protect \expandafter\@b@ll@nine
+%    \end{macrocode}
+%    For larger values we simply invoke the error-handling macro of
+%    the kernel; strictly speaking, this is not correct, since this is
+%    not a ``\LaTeX\ error'', but an error from this package.  Anyway,
+%    I think no user will be surprised by this behavior.
+%    \begin{macrocode}
+  \else
+    \expandafter\@ctrerr
+%    \end{macrocode}
+%    The argument intended for "\@b@ll@"\meta{number} follows, that
+%    "\@ctrerr" doesn't want, so we follow it with a "\@gobble"; note
+%    that this is \emph{not} "\protect"'ed, thus, during a
+%    "\protected@edef", the espansion of "\@b@ll@@cntr" in this ``out
+%    of range'' case will leave nothing in the token flow.
+%    \begin{macrocode}
+    \expandafter\@gobble
+%    \end{macrocode}
+%    After selecting the appropriate macro, we insert the argument:
+%    \begin{macrocode}
+  \fi
+    {#1}%
+}}
+%    \end{macrocode}
+%    \end{macro}
+%
+%    End of the module for the \packlass{\bullcntr} package.
+%    \begin{macrocode}
+%</bullcntr>
+%    \end{macrocode}
+%
+% \section{The code for the \packlass{\bullenum} package}
+%
+%    This part of the file goes into \filedir{\bullenum.sty}.
+%    \begin{macrocode}
+%<*bullenum>
+%    \end{macrocode}
+%
+%    \subsection{Identification}
+%
+%    The usual identification.  Is there a real need for this version
+%    of \LaTeXe?
+%    \begin{macrocode}
+\NeedsTeXFormat{LaTeX2e}[1998/06/01] % LaTeX2e is required!
+\ProvidesPackage{bullenum}
+                [2007/04/02 v0.04 (**development**)]
+%    \end{macrocode}
+%
+%    \subsection{Initial code}
+%
+%    This package has no initial code.
+%
+%    \subsection{Declaration of options}
+%
+%    Just pass every option on to the \packlass{\bullcntr} package.
+%
+%    \begin{macrocode}
+\DeclareOption*{\PassOptionsToPackage{\CurrentOption}{bullcntr}}
+%    \end{macrocode}
+%
+%    \subsection{Option processing}
+%
+%    Nothing special to note here.
+%
+%    \begin{macrocode}
+\ProcessOptions\relax
+%    \end{macrocode}
+%
+%    \subsection{Package loading}
+%
+%    Neither here.
+%
+%    \begin{macrocode}
+\RequirePackage{bullcntr}[2007/04/02]
+%    \end{macrocode}
+%
+%    \subsection{Main code}
+%
+%    The purpose of this package is simply to define the
+%    \env{bullenum} environment.
+%
+%    \begin{environment}{bullenum}
+%    This is just an \env{enumerate} environment in which we say
+%^^A
+%    \begin{flushleft}
+%      "\def\the"\meta{enum~$\ell$}"{\bullcntr{"\meta{enum~$\ell$}"}}"\\
+%      "\def\label"\meta{enum~$\ell$}"{\the"\meta{enum~$\ell$}"}"
+%    \end{flushleft}
+%^^A
+%    at the beginning, where \( \meta{enum~$\ell$} =
+%    \mbox{eval(}"\@enumctr"\mbox{)} \) (\emph{i.e.}, \(
+%    \meta{enum~$\ell$} = \texttt{enumi},\linebreak[0]
+%    \texttt{enumii},\ldots \), according to the current value of
+%    "\@enumdepth").
+%    \begin{macrocode}
+\newenvironment*{bullenum}{%
+  \enumerate
+  \expandafter\edef \csname the\@enumctr\endcsname {%
+    \noexpand\bullcntr{\@enumctr}%
+  }%
+  \expandafter\edef \csname label\@enumctr\endcsname {%
+    \expandafter\noexpand \csname the\@enumctr\endcsname
+  }%
+}{\endenumerate}
+%    \end{macrocode}
+%    \end{environment}
+%
+%    End of the module for the \packlass{\bullenum} package.
+%    \begin{macrocode}
+%</bullenum>
+%    \end{macrocode}
+%
+% \section{End of input}
+%
+%    The usual "\endinput" which prevents the \DS\ program from putting
+%    garbage into the generated files.
+%    \begin{macrocode}
+\endinput
+%    \end{macrocode}
+%
+% \Finale
+%
diff --git a/Master/texmf-dist/source/latex/bullcntr/bullcntr.ins b/Master/texmf-dist/source/latex/bullcntr/bullcntr.ins
new file mode 100644
index 00000000000..ee77307b050
--- /dev/null
+++ b/Master/texmf-dist/source/latex/bullcntr/bullcntr.ins
@@ -0,0 +1,106 @@
+%
+% This is file `bullcntr.ins'.
+%
+% This file is part of a work named "bullcntr package".
+%
+% Copyright (C) 2007 by Gustavo MEZZETTI <gustavo.mezzetti@istruzione.it>.
+%
+% The bullcntr package may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.3
+% of this license or (at your option) any later version.
+% The latest version of this license is in
+%   http://www.latex-project.org/lppl.txt
+% and version 1.3 or later is part of all distributions of LaTeX
+% version 2005/12/01 or later.
+%
+% The bullcntr package has the LPPL maintenance status
+%   "author-maintained".
+%
+% The file `manifest.txt' that comes along with this file specifies
+% what the bullcntr package consists of; more precisely, it explains
+% how the locutions "Work" and "Compiled Work", used in the LaTeX
+% Project Public License, are to be interpreted in the case of this
+% work.
+%
+% Note that the distribution of this file alone is "distribution of
+% only part of the Work" in the sense of the LaTeX Project Public
+% License, and should be avoided (see the LaTeX Project Public Licence
+% for details).
+%
+% April 2, 2007 (vers. 0.04)
+%
+\input docstrip
+
+\def\filename{bullcntr.dtx}
+\def\fileversion{0.04}
+\def\filedate{2007/04/02}
+
+\Msg{----------------------------------------------------------------}
+\Msg{}
+\Msg{Unpacking the bullcntr package -- vers. \fileversion\space (\filedate).}
+\Msg{}
+\Msg{Since this package isn't standard LaTeX, no attempt will be made}
+\Msg{to place the generated files into any directory belonging to the}
+\Msg{texmf tree of your site, using the \string\usedir\space facility of DocStrip;}
+\Msg{rather, they will be saved to the current directory. \space This means}
+\Msg{that, in order to complete the installation, you'll have to move}
+\Msg{these files into a suitable directory where LaTeX can find them;}
+\Msg{these directories vary from site to site. \space In order to learn how}
+\Msg{to locate them, look at the documentation of your particular TeX}
+\Msg{implementation.}
+\Msg{}
+\Msg{The complete listing of all the files that you need to move will}
+\Msg{be displayed below at the end of this run.}
+\Msg{}
+\Msg{----------------------------------------------------------------}
+\Msg{}
+\Ask{\answer}{Press \space <return> \space to continue
+    (your \string\answer\space will be ignored).}
+
+\preamble
+
+This is a generated file.
+It is part of a work named "bullcntr package".
+
+Copyright (C) 2007 by Gustavo MEZZETTI <gustavo.mezzetti@istruzione.it>.
+
+The bullcntr package may be distributed and/or modified under the
+conditions of the LaTeX Project Public License, either version 1.3 of
+this license or (at your option) any later version.
+The latest version of this license is in
+  http://www.latex-project.org/lppl.txt
+and version 1.3 or later is part of all distributions of LaTeX
+version 2005/12/01 or later.
+
+The bullcntr package has the LPPL maintenance status
+  "author-maintained".
+
+The file `manifest.txt' that comes along with this file specifies what
+the bullcntr package consists of; more precisely, it explains how the
+locutions "Work" and "Compiled Work", used in the LaTeX Project Public
+License, are to be interpreted in the case of this work.
+
+Note that the distribution of this file alone is "distribution of only
+part of the Work" in the sense of the LaTeX Project Public License,
+and should be avoided (see the LaTeX Project Public Licence for
+details).
+
+\endpreamble
+
+\askonceonly
+
+\generate{
+    \file{bullcntr.sty}{\from{\filename}{bullcntr}}
+    \file{bullenum.sty}{\from{\filename}{bullenum}}
+}
+
+\Msg{}
+\Msg{To finish the installation, please move the 2 files listed below}
+\Msg{into a directory where LaTeX looks for inputs files:}
+\Msg{}
+\Msg{\space\space\space\space bullcntr.sty}
+\Msg{\space\space\space\space bullenum.sty}
+\Msg{}
+\Msg{Happy TeXing!}
+
+\endbatchfile
diff --git a/Master/texmf-dist/tex/latex/bullcntr/bullcntr.sty b/Master/texmf-dist/tex/latex/bullcntr/bullcntr.sty
new file mode 100644
index 00000000000..7060e8ad411
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/bullcntr/bullcntr.sty
@@ -0,0 +1,207 @@
+%%
+%% This is file `bullcntr.sty',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% bullcntr.dtx  (with options: `bullcntr')
+%% 
+%% This is a generated file.
+%% It is part of a work named "bullcntr package".
+%% 
+%% Copyright (C) 2007 by Gustavo MEZZETTI <gustavo.mezzetti@istruzione.it>.
+%% 
+%% The bullcntr package may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either version 1.3 of
+%% this license or (at your option) any later version.
+%% The latest version of this license is in
+%%   http://www.latex-project.org/lppl.txt
+%% and version 1.3 or later is part of all distributions of LaTeX
+%% version 2005/12/01 or later.
+%% 
+%% The bullcntr package has the LPPL maintenance status
+%%   "author-maintained".
+%% 
+%% The file `manifest.txt' that comes along with this file specifies what
+%% the bullcntr package consists of; more precisely, it explains how the
+%% locutions "Work" and "Compiled Work", used in the LaTeX Project Public
+%% License, are to be interpreted in the case of this work.
+%% 
+%% Note that the distribution of this file alone is "distribution of only
+%% part of the Work" in the sense of the LaTeX Project Public License,
+%% and should be avoided (see the LaTeX Project Public Licence for
+%% details).
+%% 
+%% \CharacterTable
+%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%%   Digits        \0\1\2\3\4\5\6\7\8\9
+%%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%%   Dollar        \$     Percent       \%     Ampersand     \&
+%%   Acute accent  \'     Left paren    \(     Right paren   \)
+%%   Asterisk      \*     Plus          \+     Comma         \,
+%%   Minus         \-     Point         \.     Solidus       \/
+%%   Colon         \:     Semicolon     \;     Less than     \<
+%%   Equals        \=     Greater than  \>     Question mark \?
+%%   Commercial at \@     Left bracket  \[     Backslash     \\
+%%   Right bracket \]     Circumflex    \^     Underscore    \_
+%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%%   Right brace   \}     Tilde         \~}
+\NeedsTeXFormat{LaTeX2e}[1998/06/01] % LaTeX2e is required!
+\ProvidesPackage{bullcntr}
+                [2007/04/02 v0.04 (**development**)]
+\newcommand*\counterlargebullet{$\scriptstyle \bullet$}
+\newcommand*\countersmallbullet{$\scriptscriptstyle \bullet$}
+\newcommand*\heartctrbull{%
+  \def\counterlargebullet{$\scriptscriptstyle \heartsuit$}%
+  \let\countersmallbullet\counterlargebullet
+}
+\newcommand*\smallctrbull{%
+  \def\counterlargebullet{$\scriptscriptstyle \bullet$}%
+  \let\countersmallbullet\counterlargebullet
+}
+\newcommand*\largectrbull{%
+  \def\counterlargebullet{$\scriptstyle \bullet$}%
+  \let\countersmallbullet\counterlargebullet
+}
+\newcommand*\smartctrbull{%
+  \def\counterlargebullet{$\scriptstyle \bullet$}%
+  \def\countersmallbullet{$\scriptscriptstyle \bullet$}
+}
+\DeclareOption{heartctrbull}{\heartctrbull}
+\DeclareOption{smallctrbull}{\smallctrbull}
+\DeclareOption{largectrbull}{\largectrbull}
+\DeclareOption{smartctrbull}{\smartctrbull}
+\ExecuteOptions{smartctrbull}
+\ProcessOptions\relax
+\@ifdefinable\@b@ll@box{\def\@b@ll@box#1{%
+  \hb@xt@ \z@ {%
+    \hss\vbox to \z@ {%
+      \vss\hbox{#1}\vss
+    }\hss
+  }%
+}}
+\@ifdefinable\@b@ll@kernem{\def\@b@ll@kernem{\kern 1ex }}
+\@ifdefinable\@b@ll@kernen{\def\@b@ll@kernen{\kern .5ex }}
+\@ifdefinable\@b@ll@full@row{\def\@b@ll@full@row#1#2#3{%
+  \hbox{%
+    \thinspace
+    \@b@ll@box{#1}%
+    \@b@ll@kernem
+    \@b@ll@box{#2}%
+    \@b@ll@kernem
+    \@b@ll@box{#3}%
+    \thinspace
+  }%
+}}
+\@ifdefinable\@b@ll@half@row{\def\@b@ll@half@row#1#2{%
+  \hbox{%
+    \thinspace\@b@ll@kernen
+    \@b@ll@box{#1}%
+    \@b@ll@kernem
+    \@b@ll@box{#2}%
+    \thinspace\@b@ll@kernen
+  }%
+}}
+\@ifdefinable\@b@ll@full@skip{\def\@b@ll@full@skip{%
+  \vskip 1ex \relax
+}}
+\@ifdefinable\@b@ll@redu@skip{\def\@b@ll@redu@skip{%
+  \vskip .866025403785ex \relax
+}}
+\@ifdefinable\@b@ll@vcent{\def\@b@ll@vcent#1{%
+  \ensuremath{\vcenter{\offinterlineskip #1}}%
+}}
+\@ifdefinable\@b@ll@one{\def\@b@ll@one#1{\@b@ll@vcent{%
+  \@b@ll@full@row{}{#1}{}%
+}}}
+\@ifdefinable\@b@ll@two{\def\@b@ll@two#1{\@b@ll@vcent{%
+  \@b@ll@full@row{#1}{}{#1}%
+}}}
+\@ifdefinable\@b@ll@three{\def\@b@ll@three#1{\@b@ll@vcent{%
+  \@b@ll@full@row{}{#1}{}%
+  \@b@ll@redu@skip
+  \@b@ll@redu@skip
+  \@b@ll@full@row{#1}{}{#1}%
+}}}
+\@ifdefinable\@b@ll@four{\def\@b@ll@four#1{\@b@ll@vcent{%
+  \@b@ll@full@row{}{#1}{}%
+  \@b@ll@full@skip
+  \@b@ll@full@row{#1}{}{#1}%
+  \@b@ll@full@skip
+  \@b@ll@full@row{}{#1}{}%
+}}}
+\@ifdefinable\@b@ll@five{\def\@b@ll@five#1{\@b@ll@vcent{%
+  \@b@ll@full@row{#1}{}{#1}%
+  \@b@ll@full@skip
+  \@b@ll@full@row{}{#1}{}%
+  \@b@ll@full@skip
+  \@b@ll@full@row{#1}{}{#1}%
+}}}
+\@ifdefinable\@b@ll@six{\def\@b@ll@six#1{\@b@ll@vcent{%
+  \@b@ll@half@row{#1}{#1}%
+  \@b@ll@redu@skip
+  \@b@ll@full@row{#1}{}{#1}%
+  \@b@ll@redu@skip
+  \@b@ll@half@row{#1}{#1}%
+}}}
+\@ifdefinable\@b@ll@seven{\def\@b@ll@seven#1{\@b@ll@vcent{%
+  \@b@ll@half@row{#1}{#1}%
+  \@b@ll@redu@skip
+  \@b@ll@full@row{#1}{#1}{#1}%
+  \@b@ll@redu@skip
+  \@b@ll@half@row{#1}{#1}%
+}}}
+\@ifdefinable\@b@ll@eight{\def\@b@ll@eight#1{\@b@ll@vcent{%
+  \@b@ll@full@row{#1}{#1}{#1}%
+  \@b@ll@redu@skip
+  \@b@ll@half@row{#1}{#1}%
+  \@b@ll@redu@skip
+  \@b@ll@full@row{#1}{#1}{#1}%
+}}}
+\@ifdefinable\@b@ll@nine{\def\@b@ll@nine#1{\@b@ll@vcent{%
+  \@b@ll@full@row{#1}{#1}{#1}%
+  \@b@ll@full@skip
+  \@b@ll@full@row{#1}{#1}{#1}%
+  \@b@ll@full@skip
+  \@b@ll@full@row{#1}{#1}{#1}%
+}}}
+\newcommand*\bullcntr[1]{\expandafter\@b@ll@cntr\csname c@#1\endcsname}
+\@ifdefinable\@b@ll@cntr{\def\@b@ll@cntr#1{%
+  \expandafter\expandafter\expandafter \@b@ll@@cntr
+  \ifnum #1<6
+    \expandafter\counterlargebullet
+  \else
+    \expandafter\countersmallbullet
+  \fi
+  #1%
+}}
+\@ifdefinable\@b@ll@@cntr{\def\@b@ll@@cntr#1#2{%
+  \ifcase #2\expandafter\@gobble
+  \or
+    \expandafter\protect \expandafter\@b@ll@one
+  \or
+    \expandafter\protect \expandafter\@b@ll@two
+  \or
+    \expandafter\protect \expandafter\@b@ll@three
+  \or
+    \expandafter\protect \expandafter\@b@ll@four
+  \or
+    \expandafter\protect \expandafter\@b@ll@five
+  \or
+    \expandafter\protect \expandafter\@b@ll@six
+  \or
+    \expandafter\protect \expandafter\@b@ll@seven
+  \or
+    \expandafter\protect \expandafter\@b@ll@eight
+  \or
+    \expandafter\protect \expandafter\@b@ll@nine
+  \else
+    \expandafter\@ctrerr
+    \expandafter\@gobble
+  \fi
+    {#1}%
+}}
+\endinput
+%%
+%% End of file `bullcntr.sty'.
diff --git a/Master/texmf-dist/tex/latex/bullcntr/bullenum.sty b/Master/texmf-dist/tex/latex/bullcntr/bullenum.sty
new file mode 100644
index 00000000000..95e33274bfd
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/bullcntr/bullenum.sty
@@ -0,0 +1,67 @@
+%%
+%% This is file `bullenum.sty',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% bullcntr.dtx  (with options: `bullenum')
+%% 
+%% This is a generated file.
+%% It is part of a work named "bullcntr package".
+%% 
+%% Copyright (C) 2007 by Gustavo MEZZETTI <gustavo.mezzetti@istruzione.it>.
+%% 
+%% The bullcntr package may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either version 1.3 of
+%% this license or (at your option) any later version.
+%% The latest version of this license is in
+%%   http://www.latex-project.org/lppl.txt
+%% and version 1.3 or later is part of all distributions of LaTeX
+%% version 2005/12/01 or later.
+%% 
+%% The bullcntr package has the LPPL maintenance status
+%%   "author-maintained".
+%% 
+%% The file `manifest.txt' that comes along with this file specifies what
+%% the bullcntr package consists of; more precisely, it explains how the
+%% locutions "Work" and "Compiled Work", used in the LaTeX Project Public
+%% License, are to be interpreted in the case of this work.
+%% 
+%% Note that the distribution of this file alone is "distribution of only
+%% part of the Work" in the sense of the LaTeX Project Public License,
+%% and should be avoided (see the LaTeX Project Public Licence for
+%% details).
+%% 
+%% \CharacterTable
+%%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%%   Digits        \0\1\2\3\4\5\6\7\8\9
+%%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%%   Dollar        \$     Percent       \%     Ampersand     \&
+%%   Acute accent  \'     Left paren    \(     Right paren   \)
+%%   Asterisk      \*     Plus          \+     Comma         \,
+%%   Minus         \-     Point         \.     Solidus       \/
+%%   Colon         \:     Semicolon     \;     Less than     \<
+%%   Equals        \=     Greater than  \>     Question mark \?
+%%   Commercial at \@     Left bracket  \[     Backslash     \\
+%%   Right bracket \]     Circumflex    \^     Underscore    \_
+%%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%%   Right brace   \}     Tilde         \~}
+\NeedsTeXFormat{LaTeX2e}[1998/06/01] % LaTeX2e is required!
+\ProvidesPackage{bullenum}
+                [2007/04/02 v0.04 (**development**)]
+\DeclareOption*{\PassOptionsToPackage{\CurrentOption}{bullcntr}}
+\ProcessOptions\relax
+\RequirePackage{bullcntr}[2007/04/02]
+\newenvironment*{bullenum}{%
+  \enumerate
+  \expandafter\edef \csname the\@enumctr\endcsname {%
+    \noexpand\bullcntr{\@enumctr}%
+  }%
+  \expandafter\edef \csname label\@enumctr\endcsname {%
+    \expandafter\noexpand \csname the\@enumctr\endcsname
+  }%
+}{\endenumerate}
+\endinput
+%%
+%% End of file `bullenum.sty'.
diff --git a/Master/texmf-dist/tpm/bullcntr.tpm b/Master/texmf-dist/tpm/bullcntr.tpm
new file mode 100644
index 00000000000..9737d0eb560
--- /dev/null
+++ b/Master/texmf-dist/tpm/bullcntr.tpm
@@ -0,0 +1,35 @@
+<!DOCTYPE rdf:RDF SYSTEM "../../support/tpm.dtd">
+<rdf:RDF xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:TPM="http://texlive.dante.de/">
+  <rdf:Description about="http://texlive.dante.de/texlive/Package/bullcntr.zip">
+    <TPM:Name>bullcntr</TPM:Name>
+    <TPM:Type>Package</TPM:Type>
+    <TPM:Date>2006/04/01 21:00:00</TPM:Date>
+    <TPM:Version></TPM:Version>
+    <TPM:Creator>karl</TPM:Creator>
+    <TPM:Title>The bullcntr package.</TPM:Title>
+    <TPM:Description></TPM:Description>
+    <TPM:Author></TPM:Author>
+    <TPM:Size>941784</TPM:Size>
+    <TPM:License></TPM:License>
+    <TPM:Build/>
+    <TPM:RunFiles size="10620">
+texmf-dist/tex/latex/bullcntr/bullcntr.sty
+texmf-dist/tex/latex/bullcntr/bullenum.sty
+texmf-dist/tpm/bullcntr.tpm
+    </TPM:RunFiles>
+    <TPM:DocFiles size="866661">
+texmf-dist/doc/latex/bullcntr/README
+texmf-dist/doc/latex/bullcntr/bullcntr-man.pdf
+texmf-dist/doc/latex/bullcntr/bullcntr-man.tex
+texmf-dist/doc/latex/bullcntr/bullcntr-sam.tex
+texmf-dist/doc/latex/bullcntr/bullenum-sam.tex
+texmf-dist/doc/latex/bullcntr/manifest.txt
+    </TPM:DocFiles>
+    <TPM:SourceFiles size="65805">
+texmf-dist/source/latex/bullcntr/bullcntr.dtx
+texmf-dist/source/latex/bullcntr/bullcntr.ins
+    </TPM:SourceFiles>
+    <TPM:Provides>Package/bullcntr</TPM:Provides>
+  </rdf:Description>
+</rdf:RDF>
+
diff --git a/Master/texmf/lists/bullcntr b/Master/texmf/lists/bullcntr
new file mode 100644
index 00000000000..e8e6606a618
--- /dev/null
+++ b/Master/texmf/lists/bullcntr
@@ -0,0 +1,13 @@
+texmf-dist/doc/latex/bullcntr/README
+texmf-dist/doc/latex/bullcntr/bullcntr-man.pdf
+texmf-dist/doc/latex/bullcntr/bullcntr-man.tex
+texmf-dist/doc/latex/bullcntr/bullcntr-sam.tex
+texmf-dist/doc/latex/bullcntr/bullenum-sam.tex
+texmf-dist/doc/latex/bullcntr/manifest.txt
+texmf-dist/source/latex/bullcntr/bullcntr.dtx
+texmf-dist/source/latex/bullcntr/bullcntr.ins
+texmf-dist/tex/latex/bullcntr/bullcntr.sty
+texmf-dist/tex/latex/bullcntr/bullenum.sty
+texmf-dist/tpm/bullcntr.tpm
+
+texmf/lists/bullcntr
diff --git a/Master/texmf/tpm/collection-latexextra.tpm b/Master/texmf/tpm/collection-latexextra.tpm
index 3af0f329949..e43719fcdd0 100644
--- a/Master/texmf/tpm/collection-latexextra.tpm
+++ b/Master/texmf/tpm/collection-latexextra.tpm
@@ -52,6 +52,7 @@ A large collection of add-on packages for LaTeX.
       <TPM:Package name="bophook"/>
       <TPM:Package name="boxhandler"/>
       <TPM:Package name="breakurl"/>
+      <TPM:Package name="bullcntr"/>
       <TPM:Package name="bussproofs"/>
       <TPM:Package name="calendar"/>
       <TPM:Package name="calrsfs"/>