summaryrefslogtreecommitdiff
path: root/Master/tlpkg/tlperl/lib/CPANPLUS/Dist/MM.pm
diff options
context:
space:
mode:
Diffstat (limited to 'Master/tlpkg/tlperl/lib/CPANPLUS/Dist/MM.pm')
-rw-r--r--Master/tlpkg/tlperl/lib/CPANPLUS/Dist/MM.pm1007
1 files changed, 1007 insertions, 0 deletions
diff --git a/Master/tlpkg/tlperl/lib/CPANPLUS/Dist/MM.pm b/Master/tlpkg/tlperl/lib/CPANPLUS/Dist/MM.pm
new file mode 100644
index 00000000000..be65cd43cc8
--- /dev/null
+++ b/Master/tlpkg/tlperl/lib/CPANPLUS/Dist/MM.pm
@@ -0,0 +1,1007 @@
+package CPANPLUS::Dist::MM;
+
+use warnings;
+use strict;
+use vars qw[@ISA $STATUS];
+use base 'CPANPLUS::Dist::Base';
+
+use CPANPLUS::Internals::Constants;
+use CPANPLUS::Internals::Constants::Report;
+use CPANPLUS::Error;
+use FileHandle;
+use Cwd;
+
+use IPC::Cmd qw[run];
+use Params::Check qw[check];
+use File::Basename qw[dirname];
+use Module::Load::Conditional qw[can_load check_install];
+use Locale::Maketext::Simple Class => 'CPANPLUS', Style => 'gettext';
+
+local $Params::Check::VERBOSE = 1;
+
+=pod
+
+=head1 NAME
+
+CPANPLUS::Dist::MM
+
+=head1 SYNOPSIS
+
+ $mm = CPANPLUS::Dist::MM->new( module => $modobj );
+
+ $mm->create; # runs make && make test
+ $mm->install; # runs make install
+
+
+=head1 DESCRIPTION
+
+C<CPANPLUS::Dist::MM> is a distribution class for MakeMaker related
+modules.
+Using this package, you can create, install and uninstall perl
+modules. It inherits from C<CPANPLUS::Dist>.
+
+=head1 ACCESSORS
+
+=over 4
+
+=item parent()
+
+Returns the C<CPANPLUS::Module> object that parented this object.
+
+=item status()
+
+Returns the C<Object::Accessor> object that keeps the status for
+this module.
+
+=back
+
+=head1 STATUS ACCESSORS
+
+All accessors can be accessed as follows:
+ $mm->status->ACCESSOR
+
+=over 4
+
+=item makefile ()
+
+Location of the Makefile (or Build file).
+Set to 0 explicitly if something went wrong.
+
+=item make ()
+
+BOOL indicating if the C<make> (or C<Build>) command was successful.
+
+=item test ()
+
+BOOL indicating if the C<make test> (or C<Build test>) command was
+successful.
+
+=item prepared ()
+
+BOOL indicating if the C<prepare> call exited succesfully
+This gets set after C<perl Makefile.PL>
+
+=item distdir ()
+
+Full path to the directory in which the C<prepare> call took place,
+set after a call to C<prepare>.
+
+=item created ()
+
+BOOL indicating if the C<create> call exited succesfully. This gets
+set after C<make> and C<make test>.
+
+=item installed ()
+
+BOOL indicating if the module was installed. This gets set after
+C<make install> (or C<Build install>) exits successfully.
+
+=item uninstalled ()
+
+BOOL indicating if the module was uninstalled properly.
+
+=item _create_args ()
+
+Storage of the arguments passed to C<create> for this object. Used
+for recursive calls when satisfying prerequisites.
+
+=item _install_args ()
+
+Storage of the arguments passed to C<install> for this object. Used
+for recursive calls when satisfying prerequisites.
+
+=back
+
+=cut
+
+=head1 METHODS
+
+=head2 $bool = $dist->format_available();
+
+Returns a boolean indicating whether or not you can use this package
+to create and install modules in your environment.
+
+=cut
+
+### check if the format is available ###
+sub format_available {
+ my $dist = shift;
+
+ ### we might be called as $class->format_available =/
+ require CPANPLUS::Internals;
+ my $cb = CPANPLUS::Internals->_retrieve_id(
+ CPANPLUS::Internals->_last_id );
+ my $conf = $cb->configure_object;
+
+ my $mod = "ExtUtils::MakeMaker";
+ unless( can_load( modules => { $mod => 0.0 } ) ) {
+ error( loc( "You do not have '%1' -- '%2' not available",
+ $mod, __PACKAGE__ ) );
+ return;
+ }
+
+ for my $pgm ( qw[make] ) {
+ unless( $conf->get_program( $pgm ) ) {
+ error(loc(
+ "You do not have '%1' in your path -- '%2' not available\n" .
+ "Please check your config entry for '%1'",
+ $pgm, __PACKAGE__ , $pgm
+ ));
+ return;
+ }
+ }
+
+ return 1;
+}
+
+=pod $bool = $dist->init();
+
+Sets up the C<CPANPLUS::Dist::MM> object for use.
+Effectively creates all the needed status accessors.
+
+Called automatically whenever you create a new C<CPANPLUS::Dist> object.
+
+=cut
+
+sub init {
+ my $dist = shift;
+ my $status = $dist->status;
+
+ $status->mk_accessors(qw[makefile make test created installed uninstalled
+ bin_make _prepare_args _create_args _install_args]
+ );
+
+ return 1;
+}
+
+=pod $bool = $dist->prepare([perl => '/path/to/perl', makemakerflags => 'EXTRA=FLAGS', force => BOOL, verbose => BOOL])
+
+C<prepare> preps a distribution for installation. This means it will
+run C<perl Makefile.PL> and determine what prerequisites this distribution
+declared.
+
+If you set C<force> to true, it will go over all the stages of the
+C<prepare> process again, ignoring any previously cached results.
+
+When running C<perl Makefile.PL>, the environment variable
+C<PERL5_CPANPLUS_IS_EXECUTING> will be set to the full path of the
+C<Makefile.PL> that is being executed. This enables any code inside
+the C<Makefile.PL> to know that it is being installed via CPANPLUS.
+
+Returns true on success and false on failure.
+
+You may then call C<< $dist->create >> on the object to create the
+installable files.
+
+=cut
+
+sub prepare {
+ ### just in case you already did a create call for this module object
+ ### just via a different dist object
+ my $dist = shift;
+ my $self = $dist->parent;
+
+ ### we're also the cpan_dist, since we don't need to have anything
+ ### prepared
+ $dist = $self->status->dist_cpan if $self->status->dist_cpan;
+ $self->status->dist_cpan( $dist ) unless $self->status->dist_cpan;
+
+ my $cb = $self->parent;
+ my $conf = $cb->configure_object;
+ my %hash = @_;
+
+ my $dir;
+ unless( $dir = $self->status->extract ) {
+ error( loc( "No dir found to operate on!" ) );
+ return;
+ }
+
+ my $args;
+ my( $force, $verbose, $perl, @mmflags, $prereq_target, $prereq_format,
+ $prereq_build );
+ { local $Params::Check::ALLOW_UNKNOWN = 1;
+ my $tmpl = {
+ perl => { default => $^X, store => \$perl },
+ makemakerflags => { default =>
+ $conf->get_conf('makemakerflags') || '',
+ store => \$mmflags[0] },
+ force => { default => $conf->get_conf('force'),
+ store => \$force },
+ verbose => { default => $conf->get_conf('verbose'),
+ store => \$verbose },
+ prereq_target => { default => '', store => \$prereq_target },
+ prereq_format => { default => '',
+ store => \$prereq_format },
+ prereq_build => { default => 0, store => \$prereq_build },
+ };
+
+ $args = check( $tmpl, \%hash ) or return;
+ }
+
+
+ ### maybe we already ran a create on this object? ###
+ return 1 if $dist->status->prepared && !$force;
+
+ ### store the arguments, so ->install can use them in recursive loops ###
+ $dist->status->_prepare_args( $args );
+
+ ### chdir to work directory ###
+ my $orig = cwd();
+ unless( $cb->_chdir( dir => $dir ) ) {
+ error( loc( "Could not chdir to build directory '%1'", $dir ) );
+ return;
+ }
+
+ my $fail;
+ RUN: {
+
+ ### we resolve 'configure requires' here, so we can run the 'perl
+ ### Makefile.PL' command
+ ### XXX for tests: mock f_c_r to something that *can* resolve and
+ ### something that *doesnt* resolve. Check the error log for ok
+ ### on this step or failure
+ ### XXX make a seperate tarball to test for this scenario: simply
+ ### containing a makefile.pl/build.pl for test purposes?
+ { my $configure_requires = $dist->find_configure_requires;
+ my $ok = $dist->_resolve_prereqs(
+ format => $prereq_format,
+ verbose => $verbose,
+ prereqs => $configure_requires,
+ target => $prereq_target,
+ force => $force,
+ prereq_build => $prereq_build,
+ );
+
+ unless( $ok ) {
+
+ #### use $dist->flush to reset the cache ###
+ error( loc( "Unable to satisfy '%1' for '%2' " .
+ "-- aborting install",
+ 'configure_requires', $self->module ) );
+ $dist->status->prepared(0);
+ $fail++;
+ last RUN;
+ }
+ ### end of prereq resolving ###
+ }
+
+
+
+ ### don't run 'perl makefile.pl' again if there's a makefile already
+ if( -e MAKEFILE->() && (-M MAKEFILE->() < -M $dir) && !$force ) {
+ msg(loc("'%1' already exists, not running '%2 %3' again ".
+ " unless you force",
+ MAKEFILE->(), $perl, MAKEFILE_PL->() ), $verbose );
+
+ } else {
+ unless( -e MAKEFILE_PL->() ) {
+ msg(loc("No '%1' found - attempting to generate one",
+ MAKEFILE_PL->() ), $verbose );
+
+ $dist->write_makefile_pl(
+ verbose => $verbose,
+ force => $force
+ );
+
+ ### bail out if there's no makefile.pl ###
+ unless( -e MAKEFILE_PL->() ) {
+ error( loc( "Could not find '%1' - cannot continue",
+ MAKEFILE_PL->() ) );
+
+ ### mark that we screwed up ###
+ $dist->status->makefile(0);
+ $fail++; last RUN;
+ }
+ }
+
+ ### you can turn off running this verbose by changing
+ ### the config setting below, although it is really not
+ ### recommended
+ my $run_verbose = $verbose ||
+ $conf->get_conf('allow_build_interactivity') ||
+ 0;
+
+ ### this makes MakeMaker use defaults if possible, according
+ ### to schwern. See ticket 8047 for details.
+ local $ENV{PERL_MM_USE_DEFAULT} = 1 unless $run_verbose;
+
+ ### turn off our PERL5OPT so no modules from CPANPLUS::inc get
+ ### included in the makefile.pl -- it should build without
+ ### also, modules that run in taint mode break if we leave
+ ### our code ref in perl5opt
+ ### XXX we've removed the ENV settings from cp::inc, so only need
+ ### to reset the @INC
+ #local $ENV{PERL5OPT} = CPANPLUS::inc->original_perl5opt || '';
+
+ ### make sure it's a string, so that mmflags that have more than
+ ### one key value pair are passed as is, rather than as:
+ ### perl Makefile.PL "key=val key=>val"
+
+
+ #### XXX this needs to be the absolute path to the Makefile.PL
+ ### since cpanp-run-perl uses 'do' to execute the file, and do()
+ ### checks your @INC.. so, if there's _another_ makefile.pl in
+ ### your @INC, it will execute that one...
+ my $makefile_pl = MAKEFILE_PL->( $cb->_safe_path( path => $dir ) );
+
+ ### setting autoflush to true fixes issue from rt #8047
+ ### XXX this means that we need to keep the path to CPANPLUS
+ ### in @INC, stopping us from resolving dependencies on CPANPLUS
+ ### at bootstrap time properly.
+
+ ### XXX this fails under ipc::run due to the extra quotes,
+ ### but it works in ipc::open3. however, ipc::open3 doesn't work
+ ### on win32/cygwin. XXX TODO get a windows box and sort this out
+ # my $cmd = qq[$perl -MEnglish -le ] .
+ # QUOTE_PERL_ONE_LINER->(
+ # qq[\$OUTPUT_AUTOFLUSH++,do(q($makefile_pl))]
+ # )
+ # . $mmflags;
+
+ # my $flush = OPT_AUTOFLUSH;
+ # my $cmd = "$perl $flush $makefile_pl $mmflags";
+
+ my $run_perl = $conf->get_program('perlwrapper');
+ my $cmd = [$perl, $run_perl, $makefile_pl, @mmflags];
+
+ ### set ENV var to tell underlying code this is what we're
+ ### executing.
+ my $captured;
+ my $rv = do {
+ my $env = ENV_CPANPLUS_IS_EXECUTING;
+ local $ENV{$env} = $makefile_pl;
+ scalar run( command => $cmd,
+ buffer => \$captured,
+ verbose => $run_verbose, # may be interactive
+ );
+ };
+
+ unless( $rv ) {
+ error( loc( "Could not run '%1 %2': %3 -- cannot continue",
+ $perl, MAKEFILE_PL->(), $captured ) );
+
+ $dist->status->makefile(0);
+ $fail++; last RUN;
+ }
+
+ ### put the output on the stack, don't print it
+ msg( $captured, 0 );
+ }
+
+ ### so, nasty feature in Module::Build, that when a Makefile.PL
+ ### is a disguised Build.PL, it generates a Build file, not a
+ ### Makefile. this breaks everything :( see rt bug #19741
+ if( not -e MAKEFILE->( $dir ) and -e BUILD_PL->( $dir ) ) {
+ error(loc(
+ "We just ran '%1' without errors, but no '%2' is ".
+ "present. However, there is a '%3' file, so this may ".
+ "be related to bug #19741 in %4, which describes a ".
+ "fake '%5' which generates a '%6' file instead of a '%7'. ".
+ "You could try to work around this issue by setting '%8' ".
+ "to false and trying again. This will attempt to use the ".
+ "'%9' instead.",
+ "$^X ".MAKEFILE_PL->(), MAKEFILE->(), BUILD_PL->(),
+ 'Module::Build', MAKEFILE_PL->(), 'Build', MAKEFILE->(),
+ 'prefer_makefile', BUILD_PL->()
+ ));
+
+ $fail++, last RUN;
+ }
+
+ ### if we got here, we managed to make a 'makefile' ###
+ $dist->status->makefile( MAKEFILE->($dir) );
+
+ ### start resolving prereqs ###
+ my $prereqs = $self->status->prereqs;
+
+ ### a hashref of prereqs on success, undef on failure ###
+ $prereqs ||= $dist->_find_prereqs(
+ verbose => $verbose,
+ file => $dist->status->makefile
+ );
+
+ unless( $prereqs ) {
+ error( loc( "Unable to scan '%1' for prereqs",
+ $dist->status->makefile ) );
+
+ $fail++; last RUN;
+ }
+ }
+
+ unless( $cb->_chdir( dir => $orig ) ) {
+ error( loc( "Could not chdir back to start dir '%1'", $orig ) );
+ }
+
+ ### save where we wrote this stuff -- same as extract dir in normal
+ ### installer circumstances
+ $dist->status->distdir( $self->status->extract );
+
+ return $dist->status->prepared( $fail ? 0 : 1);
+}
+
+=pod
+
+=head2 $href = $dist->_find_prereqs( file => '/path/to/Makefile', [verbose => BOOL])
+
+Parses a C<Makefile> for C<PREREQ_PM> entries and distills from that
+any prerequisites mentioned in the C<Makefile>
+
+Returns a hash with module-version pairs on success and false on
+failure.
+
+=cut
+
+sub _find_prereqs {
+ my $dist = shift;
+ my $self = $dist->parent;
+ my $cb = $self->parent;
+ my $conf = $cb->configure_object;
+ my %hash = @_;
+
+ my ($verbose, $file);
+ my $tmpl = {
+ verbose => { default => $conf->get_conf('verbose'), store => \$verbose },
+ file => { required => 1, allow => FILE_READABLE, store => \$file },
+ };
+
+ my $args = check( $tmpl, \%hash ) or return;
+
+ ### see if we got prereqs from MYMETA
+ my $prereqs = $dist->find_mymeta_requires();
+
+ ### we found some prereqs, we'll trust MYMETA
+ ### but we do need to run it through the callback
+ return $cb->_callbacks->filter_prereqs->( $cb, $prereqs ) if keys %$prereqs;
+
+ my $fh = FileHandle->new();
+ unless( $fh->open( $file ) ) {
+ error( loc( "Cannot open '%1': %2", $file, $! ) );
+ return;
+ }
+
+ my %p;
+ while( local $_ = <$fh> ) {
+ my ($found) = m|^[\#]\s+PREREQ_PM\s+=>\s+(.+)|;
+
+ next unless $found;
+
+ while( $found =~ m/(?:\s)([\w\:]+)=>(?:q\[(.*?)\],?|undef)/g ) {
+ if( defined $p{$1} ) {
+ my $ver = $cb->_version_to_number(version => $2);
+ $p{$1} = $ver
+ if $cb->_vcmp( $ver, $p{$1} ) > 0;
+ }
+ else {
+ $p{$1} = $cb->_version_to_number(version => $2);
+ }
+ }
+ last;
+ }
+
+ my $href = $cb->_callbacks->filter_prereqs->( $cb, \%p );
+
+ $self->status->prereqs( $href );
+
+ ### just to make sure it's not the same reference ###
+ return { %$href };
+}
+
+=pod
+
+=head2 $bool = $dist->create([perl => '/path/to/perl', make => '/path/to/make', makeflags => 'EXTRA=FLAGS', prereq_target => TARGET, skiptest => BOOL, force => BOOL, verbose => BOOL])
+
+C<create> creates the files necessary for installation. This means
+it will run C<make> and C<make test>. This will also scan for and
+attempt to satisfy any prerequisites the module may have.
+
+If you set C<skiptest> to true, it will skip the C<make test> stage.
+If you set C<force> to true, it will go over all the stages of the
+C<make> process again, ignoring any previously cached results. It
+will also ignore a bad return value from C<make test> and still allow
+the operation to return true.
+
+Returns true on success and false on failure.
+
+You may then call C<< $dist->install >> on the object to actually
+install it.
+
+=cut
+
+sub create {
+ ### just in case you already did a create call for this module object
+ ### just via a different dist object
+ my $dist = shift;
+ my $self = $dist->parent;
+
+ ### we're also the cpan_dist, since we don't need to have anything
+ ### prepared
+ $dist = $self->status->dist_cpan if $self->status->dist_cpan;
+ $self->status->dist_cpan( $dist ) unless $self->status->dist_cpan;
+
+ my $cb = $self->parent;
+ my $conf = $cb->configure_object;
+ my %hash = @_;
+
+ my $dir;
+ unless( $dir = $self->status->extract ) {
+ error( loc( "No dir found to operate on!" ) );
+ return;
+ }
+
+ my $args;
+ my( $force, $verbose, $make, $makeflags, $skiptest, $prereq_target, $perl,
+ @mmflags, $prereq_format, $prereq_build);
+ { local $Params::Check::ALLOW_UNKNOWN = 1;
+ my $tmpl = {
+ perl => { default => $^X, store => \$perl },
+ force => { default => $conf->get_conf('force'),
+ store => \$force },
+ verbose => { default => $conf->get_conf('verbose'),
+ store => \$verbose },
+ make => { default => $conf->get_program('make'),
+ store => \$make },
+ makeflags => { default => $conf->get_conf('makeflags'),
+ store => \$makeflags },
+ skiptest => { default => $conf->get_conf('skiptest'),
+ store => \$skiptest },
+ prereq_target => { default => '', store => \$prereq_target },
+ ### don't set the default prereq format to 'makemaker' -- wrong!
+ prereq_format => { #default => $self->status->installer_type,
+ default => '',
+ store => \$prereq_format },
+ prereq_build => { default => 0, store => \$prereq_build },
+ };
+
+ $args = check( $tmpl, \%hash ) or return;
+ }
+
+ ### maybe we already ran a create on this object?
+ ### make sure we add to include path again, just in case we came from
+ ### ->save_state, at which point we need to restore @INC/$PERL5LIB
+ if( $dist->status->created && !$force ) {
+ $self->add_to_includepath;
+ return 1;
+ }
+
+ ### store the arguments, so ->install can use them in recursive loops ###
+ $dist->status->_create_args( $args );
+
+ unless( $dist->status->prepared ) {
+ error( loc( "You have not successfully prepared a '%2' distribution ".
+ "yet -- cannot create yet", __PACKAGE__ ) );
+ return;
+ }
+
+
+ ### chdir to work directory ###
+ my $orig = cwd();
+ unless( $cb->_chdir( dir => $dir ) ) {
+ error( loc( "Could not chdir to build directory '%1'", $dir ) );
+ return;
+ }
+
+ my $fail; my $prereq_fail; my $test_fail;
+ RUN: {
+ ### this will set the directory back to the start
+ ### dir, so we must chdir /again/
+ my $ok = $dist->_resolve_prereqs(
+ format => $prereq_format,
+ verbose => $verbose,
+ prereqs => $self->status->prereqs,
+ target => $prereq_target,
+ force => $force,
+ prereq_build => $prereq_build,
+ );
+
+ unless( $cb->_chdir( dir => $dir ) ) {
+ error( loc( "Could not chdir to build directory '%1'", $dir ) );
+ return;
+ }
+
+ unless( $ok ) {
+
+ #### use $dist->flush to reset the cache ###
+ error( loc( "Unable to satisfy prerequisites for '%1' " .
+ "-- aborting install", $self->module ) );
+ $dist->status->make(0);
+ $fail++; $prereq_fail++;
+ last RUN;
+ }
+ ### end of prereq resolving ###
+
+ my $captured;
+
+ ### 'make' section ###
+ if( -d BLIB->($dir) && (-M BLIB->($dir) < -M $dir) && !$force ) {
+ msg(loc("Already ran '%1' for this module [%2] -- " .
+ "not running again unless you force",
+ $make, $self->module ), $verbose );
+ } else {
+ unless(scalar run( command => [$make, $makeflags],
+ buffer => \$captured,
+ verbose => $verbose )
+ ) {
+ error( loc( "MAKE failed: %1 %2", $!, $captured ) );
+ $dist->status->make(0);
+ $fail++; last RUN;
+ }
+
+ ### put the output on the stack, don't print it
+ msg( $captured, 0 );
+
+ $dist->status->make(1);
+
+ ### add this directory to your lib ###
+ $self->add_to_includepath();
+
+ ### dont bail out here, there's a conditional later on
+ #last RUN if $skiptest;
+ }
+
+ ### 'make test' section ###
+ unless( $skiptest ) {
+
+ ### turn off our PERL5OPT so no modules from CPANPLUS::inc get
+ ### included in make test -- it should build without
+ ### also, modules that run in taint mode break if we leave
+ ### our code ref in perl5opt
+ ### XXX CPANPLUS::inc functionality is now obsolete.
+ #local $ENV{PERL5OPT} = CPANPLUS::inc->original_perl5opt || '';
+
+ ### you can turn off running this verbose by changing
+ ### the config setting below, although it is really not
+ ### recommended
+ my $run_verbose =
+ $verbose ||
+ $conf->get_conf('allow_build_interactivity') ||
+ 0;
+
+ ### XXX need to add makeflags here too?
+ ### yes, but they should really be split out -- see bug #4143
+ if( scalar run(
+ command => [$make, 'test', $makeflags],
+ buffer => \$captured,
+ verbose => $run_verbose,
+ ) ) {
+ ### tests might pass because it doesn't have any tests defined
+ ### log this occasion non-verbosely, so our test reporter can
+ ### pick up on this
+ if ( NO_TESTS_DEFINED->( $captured ) ) {
+ msg( NO_TESTS_DEFINED->( $captured ), 0 )
+ } else {
+ msg( loc( "MAKE TEST passed: %1", $captured ), 0 );
+ }
+
+ $dist->status->test(1);
+ } else {
+ error( loc( "MAKE TEST failed: %1 %2", $!, $captured ) );
+
+ ### send out error report here? or do so at a higher level?
+ ### --higher level --kane.
+ $dist->status->test(0);
+
+ ### mark specifically *test* failure.. so we dont
+ ### send success on force...
+ $test_fail++;
+
+ if( !$force and !$cb->_callbacks->proceed_on_test_failure->(
+ $self, $captured )
+ ) {
+ $fail++; last RUN;
+ }
+ }
+ }
+ } #</RUN>
+
+ unless( $cb->_chdir( dir => $orig ) ) {
+ error( loc( "Could not chdir back to start dir '%1'", $orig ) );
+ }
+
+ ### send out test report?
+ ### only do so if the failure is this module, not its prereq
+ if( $conf->get_conf('cpantest') and not $prereq_fail) {
+ $cb->_send_report(
+ module => $self,
+ failed => $test_fail || $fail,
+ buffer => CPANPLUS::Error->stack_as_string,
+ verbose => $verbose,
+ force => $force,
+ ) or error(loc("Failed to send test report for '%1'",
+ $self->module ) );
+ }
+
+ return $dist->status->created( $fail ? 0 : 1);
+}
+
+=pod
+
+=head2 $bool = $dist->install([make => '/path/to/make', makemakerflags => 'EXTRA=FLAGS', force => BOOL, verbose => BOOL])
+
+C<install> runs the following command:
+ make install
+
+Returns true on success, false on failure.
+
+=cut
+
+sub install {
+
+ ### just in case you did the create with ANOTHER dist object linked
+ ### to the same module object
+ my $dist = shift();
+ my $self = $dist->parent;
+ $dist = $self->status->dist_cpan if $self->status->dist_cpan;
+
+ my $cb = $self->parent;
+ my $conf = $cb->configure_object;
+ my %hash = @_;
+
+
+ unless( $dist->status->created ) {
+ error(loc("You have not successfully created a '%2' distribution yet " .
+ "-- cannot install yet", __PACKAGE__ ));
+ return;
+ }
+
+ my $dir;
+ unless( $dir = $self->status->extract ) {
+ error( loc( "No dir found to operate on!" ) );
+ return;
+ }
+
+ my $args;
+ my($force,$verbose,$make,$makeflags);
+ { local $Params::Check::ALLOW_UNKNOWN = 1;
+ my $tmpl = {
+ force => { default => $conf->get_conf('force'),
+ store => \$force },
+ verbose => { default => $conf->get_conf('verbose'),
+ store => \$verbose },
+ make => { default => $conf->get_program('make'),
+ store => \$make },
+ makeflags => { default => $conf->get_conf('makeflags'),
+ store => \$makeflags },
+ };
+
+ $args = check( $tmpl, \%hash ) or return;
+ }
+
+ ### value set and false -- means failure ###
+ if( defined $self->status->installed &&
+ !$self->status->installed && !$force
+ ) {
+ error( loc( "Module '%1' has failed to install before this session " .
+ "-- aborting install", $self->module ) );
+ return;
+ }
+
+
+ $dist->status->_install_args( $args );
+
+ my $orig = cwd();
+ unless( $cb->_chdir( dir => $dir ) ) {
+ error( loc( "Could not chdir to build directory '%1'", $dir ) );
+ return;
+ }
+
+ my $fail; my $captured;
+
+ ### 'make install' section ###
+ ### XXX need makeflags here too?
+ ### yes, but they should really be split out.. see bug #4143
+ my $cmd = [$make, 'install', $makeflags];
+ my $sudo = $conf->get_program('sudo');
+ unshift @$cmd, $sudo if $sudo and $>;
+
+ $cb->flush('lib');
+ unless(scalar run( command => $cmd,
+ verbose => $verbose,
+ buffer => \$captured,
+ ) ) {
+ error( loc( "MAKE INSTALL failed: %1 %2", $!, $captured ) );
+ $fail++;
+ }
+
+ ### put the output on the stack, don't print it
+ msg( $captured, 0 );
+
+ unless( $cb->_chdir( dir => $orig ) ) {
+ error( loc( "Could not chdir back to start dir '%1'", $orig ) );
+ }
+
+ return $dist->status->installed( $fail ? 0 : 1 );
+
+}
+
+=pod
+
+=head2 $bool = $dist->write_makefile_pl([force => BOOL, verbose => BOOL])
+
+This routine can write a C<Makefile.PL> from the information in a
+module object. It is used to write a C<Makefile.PL> when the original
+author forgot it (!!).
+
+Returns 1 on success and false on failure.
+
+The file gets written to the directory the module's been extracted
+to.
+
+=cut
+
+sub write_makefile_pl {
+ ### just in case you already did a call for this module object
+ ### just via a different dist object
+ my $dist = shift;
+ my $self = $dist->parent;
+ $dist = $self->status->dist_cpan if $self->status->dist_cpan;
+ $self->status->dist_cpan( $dist ) unless $self->status->dist_cpan;
+
+ my $cb = $self->parent;
+ my $conf = $cb->configure_object;
+ my %hash = @_;
+
+ my $dir;
+ unless( $dir = $self->status->extract ) {
+ error( loc( "No dir found to operate on!" ) );
+ return;
+ }
+
+ my ($force, $verbose);
+ my $tmpl = {
+ force => { default => $conf->get_conf('force'),
+ store => \$force },
+ verbose => { default => $conf->get_conf('verbose'),
+ store => \$verbose },
+ };
+
+ my $args = check( $tmpl, \%hash ) or return;
+
+ my $file = MAKEFILE_PL->($dir);
+ if( -s $file && !$force ) {
+ msg(loc("Already created '%1' - not doing so again without force",
+ $file ), $verbose );
+ return 1;
+ }
+
+ ### due to a bug with AS perl 5.8.4 built 810 (and maybe others)
+ ### opening files with content in them already does nasty things;
+ ### seek to pos 0 and then print, but not truncating the file
+ ### bug reported to activestate on 19 sep 2004:
+ ### http://bugs.activestate.com/show_bug.cgi?id=34051
+ unlink $file if $force;
+
+ my $fh = new FileHandle;
+ unless( $fh->open( ">$file" ) ) {
+ error( loc( "Could not create file '%1': %2", $file, $! ) );
+ return;
+ }
+
+ my $mf = MAKEFILE_PL->();
+ my $name = $self->module;
+ my $version = $self->version;
+ my $author = $self->author->author;
+ my $href = $self->status->prereqs;
+ my $prereqs = join ",\n", map {
+ (' ' x 25) . "'$_'\t=> '$href->{$_}'"
+ } keys %$href;
+ $prereqs ||= ''; # just in case there are none;
+
+ print $fh qq|
+ ### Auto-generated $mf by CPANPLUS ###
+
+ use ExtUtils::MakeMaker;
+
+ WriteMakefile(
+ NAME => '$name',
+ VERSION => '$version',
+ AUTHOR => '$author',
+ PREREQ_PM => {
+$prereqs
+ },
+ );
+ \n|;
+
+ $fh->close;
+ return 1;
+}
+
+sub dist_dir {
+ ### just in case you already did a call for this module object
+ ### just via a different dist object
+ my $dist = shift;
+ my $self = $dist->parent;
+ $dist = $self->status->dist_cpan if $self->status->dist_cpan;
+ $self->status->dist_cpan( $dist ) unless $self->status->dist_cpan;
+
+ my $cb = $self->parent;
+ my $conf = $cb->configure_object;
+ my %hash = @_;
+
+ my $make; my $verbose;
+ { local $Params::Check::ALLOW_UNKNOWN = 1;
+ my $tmpl = {
+ make => { default => $conf->get_program('make'),
+ store => \$make },
+ verbose => { default => $conf->get_conf('verbose'),
+ store => \$verbose },
+ };
+
+ check( $tmpl, \%hash ) or return;
+ }
+
+
+ my $dir;
+ unless( $dir = $self->status->extract ) {
+ error( loc( "No dir found to operate on!" ) );
+ return;
+ }
+
+ ### chdir to work directory ###
+ my $orig = cwd();
+ unless( $cb->_chdir( dir => $dir ) ) {
+ error( loc( "Could not chdir to build directory '%1'", $dir ) );
+ return;
+ }
+
+ my $fail; my $distdir;
+ TRY: {
+ $dist->prepare( @_ ) or (++$fail, last TRY);
+
+
+ my $captured;
+ unless(scalar run( command => [$make, 'distdir'],
+ buffer => \$captured,
+ verbose => $verbose )
+ ) {
+ error( loc( "MAKE DISTDIR failed: %1 %2", $!, $captured ) );
+ ++$fail, last TRY;
+ }
+
+ ### /path/to/Foo-Bar-1.2/Foo-Bar-1.2
+ $distdir = File::Spec->catdir( $dir, $self->package_name . '-' .
+ $self->package_version );
+
+ unless( -d $distdir ) {
+ error(loc("Do not know where '%1' got created", 'distdir'));
+ ++$fail, last TRY;
+ }
+ }
+
+ unless( $cb->_chdir( dir => $orig ) ) {
+ error( loc( "Could not chdir to start directory '%1'", $orig ) );
+ return;
+ }
+
+ return if $fail;
+ return $distdir;
+}
+
+
+1;
+
+# Local variables:
+# c-indentation-style: bsd
+# c-basic-offset: 4
+# indent-tabs-mode: nil
+# End:
+# vim: expandtab shiftwidth=4: