summaryrefslogtreecommitdiff
path: root/Master/tlpkg/tlgs/lib/gs_cidfn.ps
diff options
context:
space:
mode:
Diffstat (limited to 'Master/tlpkg/tlgs/lib/gs_cidfn.ps')
-rw-r--r--Master/tlpkg/tlgs/lib/gs_cidfn.ps404
1 files changed, 0 insertions, 404 deletions
diff --git a/Master/tlpkg/tlgs/lib/gs_cidfn.ps b/Master/tlpkg/tlgs/lib/gs_cidfn.ps
deleted file mode 100644
index 0daf0d57a4d..00000000000
--- a/Master/tlpkg/tlgs/lib/gs_cidfn.ps
+++ /dev/null
@@ -1,404 +0,0 @@
-% Copyright (C) 1995, 2000 Aladdin Enterprises. All rights reserved.
-%
-% This software is provided AS-IS with no warranty, either express or
-% implied.
-%
-% This software is distributed under license and may not be copied,
-% modified or distributed except as expressly authorized under the terms
-% of the license contained in the file LICENSE in this distribution.
-%
-% For more information about licensing, please refer to
-% http://www.ghostscript.com/licensing/. For information on
-% commercial licensing, go to http://www.artifex.com/licensing/ or
-% contact Artifex Software, Inc., 101 Lucas Valley Road #110,
-% San Rafael, CA 94903, U.S.A., +1(415)492-9861.
-
-% $Id: gs_cidfn.ps 7558 2007-01-03 10:30:52Z leonardo $
-% ProcSet for implementing CIDFont and CIDMap resources.
-% When this is run, systemdict is still writable.
-
-% ---------------- Defining CIDFont resources ---------------- %
-
-% Define a CIDFont resource. This is the defineresource implementation for
-% the CIDFont resource category.
-
-/.checkfonttype { % <cidfont> <fonttype> .checkfonttype <cidfont> <new?>
- 1 index /FID known {
- 1 index /FontType get ne {
- /definefont cvx /invalidfont signalerror
- } if false
- } {
- 1 index /FontType 3 -1 roll put true
- } ifelse
-} bind def
-
-/.cidfonttypes where { pop } { /.cidfonttypes 6 dict def } ifelse
-.cidfonttypes
-
-30 dict begin
-
-% The key in .cidfonttypes is the CIDFontType value;
-% the value is a procedure that takes a font name and the CIDFont dictionary
-% and replaces the latter with a real font.
-
-% ------ CIDFontType 0 (FontType 9) ------ %
-
-% We add the following entries to the CIDFont dictionary, in addition to
-% the ones documented by Adobe:
-% SubrCache - dictionary for caching Subr arrays
-% For CIDFonts where we read the data from disk incrementally:
-% GlyphData is 0 (arbitrary)
-% DataSource - a ReusableStreamDecode filter for the data
-% We also add a FID entry, and possibly a Subrs entry, to each element of
-% FDArray.
-
-dup 0 {
- 9 .checkfonttype {
- /CIDInit /ProcSet findresource begin
- .completefont9
- end
- } if
- 1 index exch .buildfont9 exch pop
-} put % Don't bind it here, because gs_fapi.ps redefines .buildfont9
-
-% Add entries to a new CIDFontType 0 font per documentation (FontMatrix)
-% or for .buildfont9 (FDArray.Private.Subrs).
-/.completefont9 { % <cidfont0> .completefont9 <cidfont0>
- currentglobal 3 1 roll dup gcheck setglobal
- dup /FontMatrix known not {
- dup /FontMatrix [0.001 0 0 0.001 0 0] put
- dup /FDArray get {
- currentglobal exch dup gcheck setglobal
- dup /FontMatrix get [1000 0 0 1000 0 0] matrix concatmatrix
- /FontMatrix exch put
- setglobal
- } forall
- } if
- dup /FDArray get {
- % Read the Subrs if necessary.
- dup /Private get dup /Subrs known not {
- dup /SubrCount .knownget {
- % Stack: font Private SubrCount
- currentglobal 3 1 roll 1 index gcheck setglobal
- array 1 index /Subrs 3 -1 roll put
- % Stack: font global Private
- 2 index begin begin .loadsubrs end end
- setglobal
- } {
- pop
- } ifelse readonly pop
- } {
- pop pop
- } ifelse
- } forall
- 3 -1 roll setglobal
-} bind def
-
-% Read some Subrs for the current Type 1 subfont.
-% The subfont's Private dict is currentdict; the CIDFont itself is the
-% next dictionary on the stack.
-/.readsubrs { % <Subrs> <start> .readsubrs <Subrs>
- 1 SubrCount 1 sub {
- dup SDBytes mul SubrMapOffset add
- dup SDBytes .readint exch SDBytes add SDBytes .readint
- 1 index sub string ReadString 2 index 3 1 roll put
- } for
-} bind def
-
-% Ensure that all the Subrs for the current Type 1 subfont are loaded.
-% The subfont's Private dict is currentdict; the CIDFont itself is the
-% next dictionary on the stack.
-/.loadsubrs {
- Subrs length 0 ne {
- SubrCache SubrMapOffset .knownget {
- % We've already loaded some Subrs at this offset.
- % Make sure we've got as many as we need.
- dup length SubrCount lt {
- % We need to load more.
- SubrCount array exch 1 index copy length .readsubrs
- SubrCache SubrMapOffset 2 index put
- } if
- } {
- % We haven't loaded any Subrs at this offset yet.
- SubrCount array 0 .readsubrs
- SubrCache SubrMapOffset 2 index put
- } ifelse
- Subrs copy pop
- } if
-} bind def
-
-% ------ CIDFontType 1 (FontType 10) ------ %
-
-dup 1 {
- 10 .checkfonttype pop
- 1 index exch .buildfont10 exch pop
-} put % Don't bind it here because gs_fapi.ps redefines .buildfont10
-
-% ------ CIDFontType 2 (FontType 11) ------ %
-
-dup 2 {
- 11 .checkfonttype pop
- 1 index exch .buildfont11 exch pop
-} put % Don't bind it here because gs_fapi.ps redefines .buildfont11
-
-pop % .cidfonttypes
-
-% ---------------- Reading CIDFontType 0 files ---------------- %
-
-/StartData { % <(Binary)|(Hex)> <datalength> StartData -
- % (currentdict is CID font dict)
- % If we're loading a resource file and the data format is
- % binary, we can just save a pointer to the data and load it
- % incrementally.
- mark {
- % Previous versions of this code made provisions for
- % reading hex-encoded data incrementally. Since hex data
- % doesn't seem to be used in practice, we no longer bother.
- 2 index (Binary) ne { stop } if
- currentfile .currentresourcefile ne { stop } if
- % Hack: the pdfwrite driver relies on finalization to write
- % out fonts. However, the font may be finalized after the
- % resource file, in which case the resource file will be
- % closed. So if the current output device is pdfwrite,
- % don't use incremental loading.
- currentdevice .devicename /pdfwrite eq { stop } if
- currentfile fileposition
- } .internalstopped {
- % File is not positionable, or uses hex data.
- % Load the data now.
- cleartomark exch
- currentfile exch
- (Hex) eq { /ASCIIHexDecode filter } if
- exch
- % Stack: file length
- dup 65400 le {
- % readstring with a 0-length string causes a rangecheck,
- % but a data length of 0 is allowed.
- string dup () ne { 1 index exch readstring pop } if
- } {
- mark 3 1 roll {
- % Stack: mark str ... file length
- dup 0 eq { pop exit } if
- dup 65400 .min dup string 3 index exch readstring pop
- % Stack: mark str ... file length newstrlen newstr
- 4 1 roll sub
- } loop
- counttomark 1 add 1 roll ]
- } ifelse
- /GlyphData exch def
- dup currentfile eq { pop } { closefile } ifelse
- } {
- % File is positionable and binary, just save a pointer.
- % Stack: (Binary) length -mark- pos
- /GlyphData 0 def
- exch pop 3 -1 roll pop exch
- % Stack: pos length
- /DataSource currentfile 2 index () .subfiledecode true .reusablestream def
- currentfile 3 1 roll add setfileposition
- } ifelse
- /SubrCache 10 dict def
- CIDFontName currentdict /CIDFont defineresource pop
- end % CID font dict
- end % resource category dict
-} bind def
-
-% Some Adobe fonts include the line
-% /Setup /cid_Setup load def
-% This is apparently included only to prevent proper, conforming PostScript
-% interpreters (as opposed to ATM or a special Adobe font loader) from
-% loading the font, since Setup is not referenced anywhere else in the file.
-/cid_Setup { } def
-
-% ------ Generic ------ %
-
-% Read a string at a given offset in a "file" (binary file or
-% GlyphData in RAM).
-/ReadString { % <pos> <string> ReadString <string>
- GlyphData 0 eq {
- % Read from the file.
- DataSource 3 -1 roll setfileposition
- DataSource exch readstring pop
- } {
- % Read from a string or an array of strings.
- GlyphData .stringsreadstring
- } ifelse
-} bind def
-/.stringsreadstring % <pos> <string> <strings> .stringsreadstring
- % <vmstring>
-{ dup type /stringtype eq
- { 3 1 roll length getinterval
- }
- { { % Stack: pos string glyphdata
- dup 0 get length dup 4 index gt { exit } if
- 4 -1 roll exch sub 3 1 roll
- dup length 1 sub 1 exch getinterval
- }
- loop
- % Stack: pos string glyphdata glyphdata[0]length
- % We know no request can span more than 2 strings.
- 3 index 3 index length add 1 index le
- { % Request fits in a single string: just return a substring.
- pop 0 get 3 1 roll length getinterval
- }
- { % Request spans 2 strings. Copy the first part.
- 1 index 0 get 4 index 3 -1 roll 1 index sub getinterval
- 2 index copy
- % Copy the second part.
- % Stack: pos str glyphdata str1
- length exch 1 get 0 3 index length
- 3 index sub getinterval 2 index 3 1 roll putinterval
- exch pop
- }
- ifelse
- }
- ifelse
-} bind def
-
-% Interpret a byte string as a (big-endian) integer.
-/.cvbsi % <bytes> .cvbsi <int>
-{ 0 exch { exch 8 bitshift add } forall
-} bind def
-
-% Read an integer from binary data.
-/.readint % <pos> <nbytes> .readint <int>
-{ string ReadString .cvbsi
-} bind def
-
-currentdict end
-
-% ---------------- Rendering ---------------- %
-
-% ------ CIDFontType 0 ------ %
-
-/.readglyphdata {
- currentfont exch .type9mapcid
- FDArray exch get exch
-} bind def
-
-% BuildGlyph procedure for CIDFontType 0.
-% The name %Type9BuildGlyph is known to the interpreter.
-/.cid0buildstring 10 string def
-(%Type9BuildGlyph) cvn { % <cidfont> <cid> %Type9BuildGlyph -
- .currentglobal 3 1 roll 1 index gcheck .setglobal
- 1 index begin
- dup .readglyphdata dup null eq {
- % Substitute CID 0. **** WRONG ****
- pop pop 0 .readglyphdata
- } if
- % Stack: cidfont cid subfont charstring
- dup null eq { pop pop pop pop } { %**** WRONG ****
- 4 -1 roll pop
- 3 1 roll exch dup 4 -1 roll 0 0 moveto
- 3 index /FontType get 2 eq { .type2execchar } { .type1execchar } ifelse
- } ifelse %**** WRONG ****
- end
- .setglobal
-} bind def
-
-% ------ CIDFontType 2 ------ %
-
-% BuildGlyph procedure for CIDFontType 2.
-% The name %Type11BuildGlyph is known to the interpreter.
-(%Type11BuildGlyph) cvn { % <cidfont> <cid> %Type11BuildGlyph -
- % We must be prepared for out-of-range CIDs.
- 2 copy { .type11mapcid } .internalstopped {
- pop /CharStrings get /.notdef get
- } if
- % Stack: cidfont cid glyphindex
- 1 index exch .type42execchar
-} bind def
-
-% ---------------- Define resources ---------------- %
-
-languagelevel exch 2 .setlanguagelevel
-
-% Define the CIDInit ProcSet resource.
-% The ProcSet dictionary is still on the stack.
-
-% We might have loaded CMap support already. However, Adobe's
-% protected font downloader defines a CIDInit ProcSet that will be
-% loaded from the filesystem later, so we must check specifically
-% for the ProcSet being defined in VM.
-/CIDInit /ProcSet 2 copy resourcestatus { pop 0 eq } { false } ifelse {
- pop pop findresource dup length 4 index length add dict .copydict
- 4 -1 roll exch .copydict
-} {
- 3 -1 roll
-} ifelse exch defineresource pop
-
-% Define the CIDFont resource category.
-% We break out .buildcidfont because it appears that at least for
-% Type 32 (CIDFontType 4) fonts, the font can be registered in the Font
-% category with only a CIDFontType and no FontType.
-/.buildcidfont { % <name> <fontdict> .buildcidfont
- % <name> <cidfont>
- systemdict /ProvideUnicode .knownget not { false } if {
- /FontEmulationProcs /ProcSet findresource
- /ProvideUnicodeDecoding get exec
- } if
- dup /CIDFontType get //.cidfonttypes exch get exec
-} odef
-
-/CIDFont /Generic /Category findresource dup length dict .copydict
-dup /InstanceType /dicttype put
-dup /DefineResource {
- .buildcidfont
- dup /OrigFont known not {
- dup dup /OrigFont exch .growput % CPSI does it. Adding just for CET 33_all.PS conformity.
- } if
- dup /PaintType known not {
- dup /PaintType 0 .growput % CPSI does it. Adding just for CET 33_all.PS conformity.
- } if
- /Generic /Category findresource /DefineResource get exec
-} put
-% CIDFonts may be defined in CFF OpenType files.
-% Check for this here.
-/.loadcidfontresource {
- dup .ResourceFile {
- {.loadfont} .execasresource
- } {
- dup /undefinedresource signalerror
- } ifelse
-} bind def
-dup /.LoadResource {
- currentglobal {
- .loadcidfontresource
- } {
- true setglobal {.loadcidfontresource} stopped false setglobal {stop} if
- } ifelse
-} bind put
-
-/Category defineresource pop
-
-% Add the new FontType resources.
-
-9 1 11 { dup /FontType defineresource pop } for
-
-% Add the new FMapType resource.
-
-9 dup /FMapType defineresource pop
-
-% Define the CIDMap resource category.
-% These aren't documented, but it's clear what they are for:
-% to give names to CIDMaps for CIDFontType 2 fonts.
-
-/CIDMap /Generic /Category findresource dup length dict .copydict
-dup /.CheckResource {
- % Allow a string, an array of strings, or (as of Adobe release 3011)
- % a dictionary.
- dup type dup dup /stringtype eq exch /dicttype eq or {
- pop true
- } {
- dup /arraytype eq exch /packedarraytype eq or {
- true exch { type /stringtype eq and } forall
- } {
- false
- } ifelse
- } ifelse
-} bind put
-/Category defineresource pop
-
-.setlanguagelevel
-
-%% Replace 1 (gs_ciddc.ps)
-(gs_ciddc.ps) runlibfile