diff options
Diffstat (limited to 'Master/texmf-dist')
| -rw-r--r-- | Master/texmf-dist/source/latex/bizcard/bizcard.drv | 57 | ||||
| -rw-r--r-- | Master/texmf-dist/source/latex/bizcard/bizcard.dtx | 297 | ||||
| -rw-r--r-- | Master/texmf-dist/source/latex/bizcard/bizcard.ins | 35 |
3 files changed, 389 insertions, 0 deletions
diff --git a/Master/texmf-dist/source/latex/bizcard/bizcard.drv b/Master/texmf-dist/source/latex/bizcard/bizcard.drv new file mode 100644 index 00000000000..a98f2ed78d8 --- /dev/null +++ b/Master/texmf-dist/source/latex/bizcard/bizcard.drv @@ -0,0 +1,57 @@ +%% +%% This is file `bizcard.drv', +%% generated with the docstrip utility. +%% +%% The original source files were: +%% +%% bizcard.dtx (with options: `driver') +%% bizcard: A LaTeX2e package for business/visiting/calling cards +%% +%% Copyright (C) 1999 Sebastian Marius Kirsch <skirsch@t-online.de> +%% +%% This program is free software; you can redistribute it and/or modify +%% it under the terms of the GNU General Public License as published by +%% the Free Software Foundation; either version 2, or (at your option) +%% any later version. +%% +%% This program is distributed in the hope that it will be useful, +%% but WITHOUT ANY WARRANTY; without even the implied warranty of +%% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +%% GNU General Public License for more details. +%% +%% You should have received a copy of the GNU General Public License +%% along with this program; see the file COPYING. +%% If not, write to the Free Software Foundation, +%% 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +%% +\def\fileversion{1.1} % ^^A -*-latex-*- +\def\filedate{1999/09/04} +\documentclass{ltxdoc} + +\newcommand*{\bizcard}{\textsf{bizcard}} + +\begin{document} + +\DocInput{bizcard.dtx} + +\end{document} +%%\CheckSum{73} +%%\CharacterTable +%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z +%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z +%% Digits \0\1\2\3\4\5\6\7\8\9 +%% Exclamation \! Double quote \" Hash (number) \# +%% Dollar \$ Percent \% Ampersand \& +%% Acute accent \' Left paren \( Right paren \) +%% Asterisk \* Plus \+ Comma \, +%% Minus \- Point \. Solidus \/ +%% Colon \: Semicolon \; Less than \< +%% Equals \= Greater than \> Question mark \? +%% Commercial at \@ Left bracket \[ Backslash \\ +%% Right bracket \] Circumflex \^ Underscore \_ +%% Grave accent \` Left brace \{ Vertical bar \| +%% Right brace \} Tilde \~} +%% +\endinput +%% +%% End of file `bizcard.drv'. diff --git a/Master/texmf-dist/source/latex/bizcard/bizcard.dtx b/Master/texmf-dist/source/latex/bizcard/bizcard.dtx new file mode 100644 index 00000000000..b023bd8f80e --- /dev/null +++ b/Master/texmf-dist/source/latex/bizcard/bizcard.dtx @@ -0,0 +1,297 @@ +\def\fileversion{1.1} % ^^A -*-latex-*- +\def\filedate{1999/09/04} +%\iffalse meta-comment +%<*driver> +\documentclass{ltxdoc} + +\newcommand*{\bizcard}{\textsf{bizcard}} + +\begin{document} + +\DocInput{bizcard.dtx} + +\end{document} +%</driver> +%\fi +% ^^A $Id: bizcard.dtx,v 1.2 1999/08/30 19:46:53 skirsch Exp skirsch $ +%%\CheckSum{73} +%%\CharacterTable +%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z +%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z +%% Digits \0\1\2\3\4\5\6\7\8\9 +%% Exclamation \! Double quote \" Hash (number) \# +%% Dollar \$ Percent \% Ampersand \& +%% Acute accent \' Left paren \( Right paren \) +%% Asterisk \* Plus \+ Comma \, +%% Minus \- Point \. Solidus \/ +%% Colon \: Semicolon \; Less than \< +%% Equals \= Greater than \> Question mark \? +%% Commercial at \@ Left bracket \[ Backslash \\ +%% Right bracket \] Circumflex \^ Underscore \_ +%% Grave accent \` Left brace \{ Vertical bar \| +%% Right brace \} Tilde \~} +% +%\changes{1.0}{1999/08/30}{Based on a \LaTeX2.09 style by Silvano Balemi.} +%\changes{1.1}{1999/09/04}{Version check for \texttt{geometry}. Simpler +%example.} +% +%\title{\bizcard: A \LaTeXe\ package for business/visiting/calling +%cards\thanks{This file has version number \fileversion, last revised +%\filedate.}} +% +%\author{Sebastian Marius Kirsch\\ +% \texttt{skirsch@t-online.de}} +% +%\date{\filedate} +% +%\maketitle +% +%\begin{abstract} +%This is a package for typesetting business/visiting/calling +%cards\footnote{I'm unsure about the correct term; my dictionary says +%visiting/calling card, but `visiting card' sounds awfully like a +%literal translation of the German `Visitenkarte', and I've only heard +%them referred to as `business cards', so that's what I'm calling them.} +%in the standard size \(2''\times 3.5''\). +%\end{abstract} +% +%\section{Introduction} +% +%This style is an adaption of \texttt{card.sty} by Silvano Balemi, a +%\LaTeX2.09 style for the same purpose. The original style file can be +%found under +%\begin{quote} +% \texttt{CTAN:macros/latex209/contrib/misc/card.sty} +%\end{quote} +%I adapted +%it to \LaTeXe, wrote the documentation (the docs in Silvano's original +%file are, unfortunately, slightly wrong), and changed the size of the +%cards to the American standard size \(2''\times 3.5''\). (At least, +%there is a standard for biz cards in the USA.) +% +%If you are interested in other uses for business cards, and a reason +%why they \emph{have} to have the proportions \(4\times7\), go to +% +%\begin{quote} +%|http://users.aol.com/polygons/bcards/bcards1.html| or\\ +%|http://world.std.com/~j9/sponge/| +%\end{quote} +% % +%\section{Requirements} +% +%If the package finds that the current text area is not large enough for +%a sheet of biz cards (\(179\,\mathrm{mm}\times 255\,\mathrm{mm}\)), it +%will load the \texttt{geometry} package (from +%\texttt{CTAN:macros/latex/contrib/supported/geometry/} to set a +%sufficiently large text area. +% +%If you do not have the \texttt{geometry} package, or your version is +%too old, you can load a different package to enlarge the text area +%(eg. \texttt{vmargin} or \texttt{typearea}) before loading \bizcard\ +%and thereby avoid loading \texttt{geometry}. +% +%\section{Installation} +% +%The actual package is produced by running \TeX\ on |bizcard.ins|. This +%produces |bizcard.sty|, the style file, which must be moved where \TeX\ +%can find it. +% +%\section{Options} +% +%The package accepts four options that affect how the dimensions of the +%cards are marked: +% +%\begin{description} +%\item[\texttt{star}] (default) tiny stars in the corners of the cards. +%\item[\texttt{none}] no marks. Figure out for yourself where the +% cards end. Allegedly useful for double-sided cards. +%\item[\texttt{frame}] full frames around the cards. Useful for designing +% new cards. +%\item[\texttt{flat}] non-invasive marks that are outside the cards +% (like crop marks.) Most useful if you are cutting the cards on a +% guillotine cutting machine. +%\end{description} +% +%\section{The \texttt{bizcard} environment} +% +%The \texttt{bizcard} environment contains the description of the +%card. It is implemented via a \texttt{picture} environment with the +%|\unitlength| of \(1\,\mathrm{mm}\) and the dimensions +%\(89\times51\). Therefore, you can use all the \texttt{picture} +%commands in it---indeed, you have to. +% +%The \texttt{bizcard} environment will print one page of 10 biz cards. +% +%\section{Example} +% +%The package is used like this: +% +% \begin{macrocode} +%<*example> +\documentclass[a4paper]{article} + +\usepackage[flat]{bizcard} + +\begin{document} + +\begin{bizcard} + \sffamily + + \put(19,38){\makebox(50,5){\Large\bfseries Sebastian Kirsch}} + \put(19,32){\makebox(50,5){\large -- origami art --}} + + \put(7,14){\makebox(79,4)[tl]{Marh{\"o}ferstra{\ss}e 23A}} + \put(7,10){\makebox(79,4)[tl]{66978 Clausen}} + \put(7,6){\makebox(79,4)[tl]{Germany}} + + \put(43,14){\makebox(10,4)[tr]{e-mail:}} + \put(57,14){\makebox(25,4)[tr]{skirsch@t-online.de}} + + \put(43,10){\makebox(10,4)[tr]{phone:}} + \put(57,10){\makebox(25,4)[tr]{+49\,6333\,4653}} + + \put(43,6){\makebox(10,4)[tr]{fax:}} + \put(57,6){\makebox(25,4)[tr]{+49\,6333\,7222}} +\end{bizcard} + +\end{document} +%</example> +% \end{macrocode} +% +%\section{Legal rubbish} +%\bizcard: A \LaTeXe package for business/visiting/calling cards +% +%Copyright \copyright\ 1999 Sebastian Marius Kirsch\texttt{% +% $\langle$skirsch@t-online.de$\rangle$} +% +%This program is free software; you can redistribute it and/or modify +%it under the terms of the GNU General Public License as published by +%the Free Software Foundation; either version 2, or (at your option) +%any later version. +% +%This program is distributed in the hope that it will be useful, +%but WITHOUT ANY WARRANTY; without even the implied warranty of +%MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +%GNU General Public License for more details. +% +%You should have received a copy of the GNU General Public License +%along with this program; see the file COPYING. +%If not, write to the Free Software Foundation, +%59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +%% +%\StopEventually +% +%\section{The \texttt{docstrip} modules} +% +%This file contains three modules to direct \texttt{docstrip} in +%generating the external files: +% +%\begin{tabular}[t]{ll} +%driver & A short driver for producing the documentation\\ +%package & The package itself\\ +%example & The example mentioned above +%\end{tabular} +% +%\section{The Code} +% +%\subsection{Introduction} +% +%First we have to introduce ourselves. +% +% \begin{macrocode} +%<*package> +\NeedsTeXFormat{LaTeX2e} +\ProvidesPackage{bizcard}% + [\filedate\space v\fileversion\space Package for business cards] +% \end{macrocode} +% +%\subsection{Marks} +% +% \begin{macrocode} +\newcommand*{\bizcard@marks}{} +% \end{macrocode} +% +%Create no marks. Useful when printing double-sided cards. +% +% \begin{macrocode} +\DeclareOption{none}{\renewcommand{\bizcard@marks}{}} +% \end{macrocode} +% +% Draws the full frame around each card. Useful for designing a card. +% +% \begin{macrocode} +\DeclareOption{frame}{\renewcommand{\bizcard@marks}{% + \multiput(0,0)(0,51){6}{\line(1,0){178}} + \multiput(0,0)(89,0){3}{\line(0,1){255}}}} +% \end{macrocode} +% +% Creates small star at all corners of all cards. +% +% \begin{macrocode} +\DeclareOption{star}{\renewcommand{\bizcard@marks}{% +\multiput(0,0)(0,51){6}{\makebox(0.0,0.1)[c]{{\tiny +}}} +\multiput(89,0)(0,51){6}{\makebox(0.0,0.1)[c]{{\tiny +}}} +\multiput(178,0)(0,51){6}{\makebox(0.0,0.1)[c]{{\tiny +}}}}} +% \end{macrocode} +% +% These marks are not invasive. Marks are not put on the cards. +% +% \begin{macrocode} +\DeclareOption{flat}{\renewcommand{\bizcard@marks}{% +\thinlines +\multiput(0,-.5)(89,0){3}{\line(0,-1){5}} +\multiput(0,255.5)(89,0){3}{\line(0,1){5}} +\multiput(-.5,0)(0,51){6}{\line(-1,0){5}} +\multiput(178.5,0)(0,51){6}{\line(1,0){5}}}} +% \end{macrocode} +% +%Default marks are star marks. +% +% \begin{macrocode} +\ExecuteOptions{star} + +\ProcessOptions +% \end{macrocode} +% +%\subsection{Type area} +% +%If the package finds that the dimensions of the body are too small to +%contain a sheet of biz cards, it will call the \texttt{geometry} +%package to make enough room. +% +% \begin{macrocode} +\RequirePackage{ifthen} + +\ifthenelse{% + \lengthtest{\textwidth<178.8mm}\or\lengthtest{\textheight<255mm}}{% + \RequirePackage[body={178.8mm,255mm},noheadfoot]{geometry}[1998/04/08]% + }{} +% \end{macrocode} +% +%\subsection{The \texttt{bizcard} environment} +% +%The \texttt{bizcard} environment uses two \texttt{picture} environments +%to typeset both the single card and the full sheet of pages. +% +% \begin{macrocode} +\newsavebox{\bizcard@box} + +\newenvironment{bizcard}{% + \setlength{\unitlength}{1mm}% + \begin{lrbox}{\bizcard@box}% + \begin{picture}(89,51)% + }{% + \end{picture}% + \end{lrbox}% + \thispagestyle{empty}% + \noindent\begin{picture}(178,255)(0,0)% + \multiput(0,0)(0,51){5}{\usebox{\bizcard@box}} + \multiput(89,0)(0,51){5}{\usebox{\bizcard@box}} + \bizcard@marks + \end{picture} + } +%</package> +% \end{macrocode} +% +%\Finale +\endinput
\ No newline at end of file diff --git a/Master/texmf-dist/source/latex/bizcard/bizcard.ins b/Master/texmf-dist/source/latex/bizcard/bizcard.ins new file mode 100644 index 00000000000..cb1c3e6d367 --- /dev/null +++ b/Master/texmf-dist/source/latex/bizcard/bizcard.ins @@ -0,0 +1,35 @@ +% -*-tex-*- +% $Id: bizcard.ins,v 1.1 1999/08/30 19:29:50 skirsch Exp skirsch $ +\def\batchfile{bizcard.ins} +\input docstrip.tex + +\keepsilent + +\preamble +bizcard: A LaTeX2e package for business/visiting/calling cards + +Copyright (C) 1999 Sebastian Marius Kirsch <skirsch@t-online.de> + +This program is free software; you can redistribute it and/or modify +it under the terms of the GNU General Public License as published by +the Free Software Foundation; either version 2, or (at your option) +any later version. + +This program is distributed in the hope that it will be useful, +but WITHOUT ANY WARRANTY; without even the implied warranty of +MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +GNU General Public License for more details. + +You should have received a copy of the GNU General Public License +along with this program; see the file COPYING. +If not, write to the Free Software Foundation, +59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + +\endpreamble + +\generateFile{bizcard.sty}{f}{\from{bizcard.dtx}{package}} +\generateFile{bizcard.drv}{f}{\from{bizcard.dtx}{driver}} +\generateFile{bizex.tex}{f}{\from{bizcard.dtx}{example}} + +\endinput + |