summaryrefslogtreecommitdiff
path: root/Master/texmf-dist
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist')
-rw-r--r--Master/texmf-dist/doc/latex/notes2bib/README15
-rw-r--r--Master/texmf-dist/doc/latex/notes2bib/notes2bib.pdfbin0 -> 174986 bytes
-rw-r--r--Master/texmf-dist/source/latex/notes2bib/notes2bib.dtx1161
-rw-r--r--Master/texmf-dist/source/latex/notes2bib/notes2bib.ins33
-rw-r--r--Master/texmf-dist/tex/latex/notes2bib/notes2bib.sty307
5 files changed, 1516 insertions, 0 deletions
diff --git a/Master/texmf-dist/doc/latex/notes2bib/README b/Master/texmf-dist/doc/latex/notes2bib/README
new file mode 100644
index 00000000000..95e699b5978
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/notes2bib/README
@@ -0,0 +1,15 @@
+The notes2bib package --- Integrating notes into the bibliography
+
+----------------------------------------------------------------
+Maintained by Joseph Wright
+E-mail: joseph.wright@morningstar2.co.uk
+Released under the GNU General Public License
+See http://www.gnu.org/licenses/gpl.txt
+----------------------------------------------------------------
+
+The notes2bib package defines a new type of note, bibnote,
+which will always be added to the bibliography. The package
+allows footnotes and endnotes to be moved into the bibliography
+in the same way. The package can be used with natbib and
+biblatex as well as plain LaTeX citations. Both sorted and
+unsorted bibliography styles are supported.
diff --git a/Master/texmf-dist/doc/latex/notes2bib/notes2bib.pdf b/Master/texmf-dist/doc/latex/notes2bib/notes2bib.pdf
new file mode 100644
index 00000000000..34fb8b9f5de
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/notes2bib/notes2bib.pdf
Binary files differ
diff --git a/Master/texmf-dist/source/latex/notes2bib/notes2bib.dtx b/Master/texmf-dist/source/latex/notes2bib/notes2bib.dtx
new file mode 100644
index 00000000000..06c26173a56
--- /dev/null
+++ b/Master/texmf-dist/source/latex/notes2bib/notes2bib.dtx
@@ -0,0 +1,1161 @@
+%\iffalse meta-comment
+%
+% Copyright (C) 2007 by
+% Joseph Wright <joseph.wright@morningstar2.co.uk>
+%
+% Released under the GNU General Public License v2
+% See http://www.gnu.org/licenses/gpl.txt
+%
+% This work consists of the main source file notes2bib.dtx
+% and the derived files notes2bib.sty and notes2bib.pdf
+%
+%<*driver>
+\PassOptionsToClass{a4paper}{article}
+\documentclass{ltxdoc}
+\EnableCrossrefs
+\CodelineIndex
+\RecordChanges
+%\OnlyDescription
+\usepackage[T1]{fontenc}
+\usepackage[english,UKenglish]{babel}
+\usepackage{mathpazo,booktabs,array,url,graphicx,courier,unitsdef}
+\usepackage{upgreek}
+\usepackage[scaled=0.95]{helvet}
+\usepackage[version=3]{mhchem}
+\usepackage[final]{microtype}
+% Some tricks from Heiko Oberdiek
+\RequirePackage{embedfile}
+\embedfile[%
+ stringmethod=escape,%
+ mimetype=plain/text,%
+ desc={LaTeX docstrip source archive for package `\jobname'}%
+ ]{\jobname.dtx}
+\usepackage{\jobname}
+\usepackage[numbered]{hypdoc}
+\begin{document}
+ \DocInput{\jobname.dtx}
+\end{document}
+%</driver>
+%\fi
+%
+%\CheckSum{486}
+%
+%\CharacterTable
+% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+% Digits \0\1\2\3\4\5\6\7\8\9
+% Exclamation \! Double quote \" Hash (number) \#
+% Dollar \$ Percent \% Ampersand \&
+% Acute accent \' Left paren \( Right paren \)
+% Asterisk \* Plus \+ Comma \,
+% Minus \- Point \. Solidus \/
+% Colon \: Semicolon \; Less than \<
+% Equals \= Greater than \> Question mark \?
+% Commercial at \@ Left bracket \[ Backslash \\
+% Right bracket \] Circumflex \^ Underscore \_
+% Grave accent \` Left brace \{ Vertical bar \|
+% Right brace \} Tilde \~}
+%
+%\GetFileInfo{\jobname.sty}
+%
+%\changes{v1.0}{2007/08/30}{Initial public release}
+%
+%\DoNotIndex{\@arabic,\@bsphack,\@esphack,\@fileswfalse}
+%\DoNotIndex{\@ifclassloaded,\@ifnextchar,\@ifpackageloaded}
+%\DoNotIndex{\@ifundefined,\@makeother,\@onelevel@sanitize}
+%\DoNotIndex{\@undefined,\AtBeginDocument,\AtEndDocument,\autocite}
+%\DoNotIndex{\begingroup,\bib@gadd,\blx@bibfiles,\catcode,\cite}
+%\DoNotIndex{\closeout,\csname,\DeclareOption,\def,\do,\dospecials}
+%\DoNotIndex{\edef,\else,\endcsname,\endgroup,\endnote,\endnotemark}
+%\DoNotIndex{\endnotetext,\ExecuteOptions,\expandafter,\fi}
+%\DoNotIndex{\footnot,\footnotemark,\footnotetext,\gdef,\global}
+%\DoNotIndex{\if@filesw,\ifdefined,\ifnum,\ifx,\ignorespaces}
+%\DoNotIndex{\immediate,\jobname,\let,\long,\MessageBreak}
+%\DoNotIndex{\NeedsTeXFormat,\newcommand,\newcounter,\newif}
+%\DoNotIndex{\newwrite,\nocite,\openout,\PackageInfo,\PackageWarning}
+%\DoNotIndex{\patchcmd,\printbibliography,\ProcessOptions,\protect}
+%\DoNotIndex{\ProvidesPackage,\relax,\renewcommand,\RequirePackage}
+%\DoNotIndex{\space,\stepcounter,\string,\supercite,\the}
+%\DoNotIndex{\theendnotes,\value,\write,\xdef,\xspace,\z@}
+%\DoNotIndex{\DeclareRobustCommand}
+%
+%\title{\texttt{notes2bib} --- Integrating notes into the
+% bibliography%
+% \thanks{This file describes version \fileversion, last revised
+% \filedate.}}
+%\author{Joseph Wright%
+% \thanks{E-mail: joseph.wright@morningstar2.co.uk}}
+%\date{Released \filedate}
+%
+%\maketitle
+%
+%\begin{abstract}
+% The |notes2bib| package defines a new type of note, |bibnote|,
+% which will always be added to the bibliography. The package allows
+% footnotes and endnotes to be moved into the bibliography in the
+% same way. The package can be used with |natbib| and |biblatex| as
+% well as plain LaTeX citations. Both sorted and unsorted
+% bibliography styles are supported.
+%\end{abstract}
+%
+%\begin{multicols}{2}
+%\tableofcontents
+%\end{multicols}
+%
+%\section{Background}
+% In most subject areas, bibliographic citations and notes are
+% separate entities. However, in some parts of the physical sciences
+% (chemistry and physics) it is usual for references to the
+% literature and notes to be given together in a ``References and
+% Notes'' section. By default, this requires that BibTeX users
+% create a notes database for each document that they write.
+%
+% The |endnotes| package allows the user to create endnotes rather
+% than footnotes. However, this does not place the notes in the
+% bibliography. The \textsc{aps} have developed the REVTeX document
+% class, which allows footnotes and endnotes to be added to the
+% bibliography. Notes can only be placed at the end of the
+% bibliography using this system. Furthermore, the code to achieve
+% this effect is not available as a package separate from REVTeX.
+%
+% The aim of the |notes2bib| package is to make integration of notes
+% into the bibliography easy. Notes can be written as normal in the
+% LaTeX source, and are automatically moved to the bibliography. The
+% package is compatible with sorted and unsorted bibliography styles.
+% The package has been designed for use with numerical citations ,
+% although it will work with other systems.
+%
+%\section{Basic use}
+%\DescribeMacro{\bibnote}
+% In the most basic form, the package can be used simply by loading
+% it in the preamble as normal. This adds a new type of note to the
+% existing \cmd{\footnote} type: \cmd{\bibnote}. This can be used in
+% exactly the same way as a footnote, taking one mandatory argument
+% \marg{text}. The \meta{text} will be made available as to the
+% bibliography as a note (henceforth referred to as a bibnote). By
+% default, each bibnote is given an automatically-generated label
+% (see Section \ref{custom} for details of modifying the automatic
+% system). However, \cmd{\bibnote} accepts an optional argument
+% \oarg{label}, which can be used to over-ride this. This is
+% particularly useful when a note will be referenced several times.
+%
+%\DescribeMacro{\bibnotemark}
+%\DescribeMacro{\bibnotetext}
+% In common with \cmd{\footnote}, the basic \cmd{\bibnote} macro has
+% companion macros \cmd{\bibnotemark} and \cmd{\bibnotetext}. The
+% text provided for each not is not ``fragile,'' and so it should not
+% be necessary to use \cmd{\bibnotemark} directly. It is needed when
+% replacing footnotes by bibnotes. Notice that there \emph{are}
+% places where bibnotes will be problematic, for example in section
+% headings which also appear in the Table of Contents. In these
+% contexts, use \cmd{\cite} to reference the note, or use an optional
+% argument to the \cmd{\section}, \emph{etc.}
+%
+%\subsection{Package options}
+% The |notes2bib| package currently accepts a number of options. The
+% |footnotes| option turns standard LaTeX footnotes into bibnotes
+% \bibnote{The |\thanks| macro used in making titles uses the
+% footnote mechanism. This is unaffected by loading |notes2bib| even
+% with the |footnote| option.}. Thus footnotes then appear in the
+% bibliography with no further user input. The \cmd{\footnotemark}
+% and \cmd{\footnotetext} macros are supported, and are aliased to
+% \cmd{\bibnotemark} and \cmd{\bibnotetext}, respectively.
+%
+% The |endnotes| option works in the same way as the |footnotes| one,
+% but in this case \cmd{\endnote} text is added to the bibliography.
+% The \cmd{\endnote} command is defined by the |endnotes| package,
+% but it is not necessary to load the |endnotes| package for this
+% function to work in |notes2bib|.
+%
+% The |head| and |tail| options affect the placement of notes
+% relative to ``real'' citations. By default, all bibliographic
+% citations are written in the order they appear in the source. Thus,
+% with an unsorted bibliography style, they will appear in the order
+% given. The |tail| option will force all notes to appear after real
+% citations, whereas the |head| option causes notes to come first
+% \bibnote{The |head| option is provided primarily for consistency
+% with the |tail| option. The system used to give |head| notes is
+% something of a hack, and is \emph{not} a core part of the
+% package.}. This has been designed to work with both sorted and
+% unsorted bibliography styles.
+%
+% Finally, the package takes the |killpercent| option. This affects
+% the handling of percentage characters within notes. By default,
+% the percentage character is treated as a comment marker (as
+% normal). Thus the rest of the line is ignored. With the
+% |killpercent| option, the \% is completely skipped over,
+% \emph{e.g.}~writing \verb*=Some text % A comment= will place
+% \verb*=Some text A comment= in the notes database \bibnote{When
+% producing the documentation for the package, this was something of
+% a headache until the problem was solved.}.
+%
+%\subsection{Output of notes}
+% Bibnotes are only printed when a bibliography is created. This
+% means that at the very least a \cmd{\bibliographystyle} command
+% must appear in the source \bibnote{|biblatex| users will define a
+% style when loading |biblatex|, of course}. Under most
+% circumstances, the user will be citing literature, and so will also
+% include a \cmd{\bibliography} command in their source.
+% Bibliography notes are automatically added to the citations to be
+% printed.
+%
+%\DescribeMacro{\printbibnotes}
+% If bibnotes are being used without any other citations, then the
+% user cannot place \cmd{\bibliography} in the source
+% \bibnote[verbhack]{LaTeX will complain if the user puts
+% |\bibliography{}|}. The package therefore
+% provides the macro \cmd{\printbibnotes}, which will output only the
+% notes. If the |endnotes| package has been loaded, the
+% \cmd{\theendnotes} macro is redefined to achieve the same effect.
+%
+%\subsection{Cross-referencing notes}
+% As explained above, each note is automatically assigned a label, or
+% the user can provide one as an optional argument to the note. In
+% either case, notes may then be cross-referenced. This should be
+% done using the \cmd{\cite} command (or similar) as the labels are
+% bibliographic citations.
+%
+%\subsection{Interaction with other packages}
+% |notes2bib| is designed to work well with as many other packages as
+% possible. It tries to avoid changing anything which other packages
+% may rely on. That said, it is best to load |notes2bib| after other
+% packages that affect citations, footnotes or endnotes. As usual,
+% the |notes2bib| package should be loaded before |hyperref|
+% \bibnote{It is usually the case that |hyperref| should be the very
+% last package loaded in the preamble.}.
+%
+% The |notes2bib| package is compatible with the current release of
+% |biblatex| (v0.6). As |biblatex| works very differently from other
+% citation systems, |notes2bib| must be loaded \emph{after}
+% |biblatex|. This allows the package to adjust correctly for some
+% important differences in operation of the bibliography environment.
+%
+%\section{Customisation\label{custom}}
+% The |notes2bib| package provides a number of possibilities for
+% customisation. Some of these will be useful only in somewhat
+% unusual circumstances. These more low-level macros all begin
+% \texttt{\textbackslash niib\dots}.
+%
+%\DescribeMacro{\bibnotename}
+%\DescribeMacro{\thebibnote}
+% Each note created by |notes2bib| is automatically given a label,
+% unless one has been specified by user as an optional argument. By
+% default, this is the text of \cmd{\bibnotename} (normally
+% \bibnotename), followed by the note number (counted automatically).
+% By redefining \cmd{\bibnotename} all notes can be given a new
+% label, still bearing the note number. More complex effects can
+% be achieved by altering \cmd{\thebibnote}. This is defined as
+% |\bibnotename\the\value{bibnote}| by default.
+%
+%\DescribeMacro{\niibcite}
+% The macro used to cite notes is set in \cmd{\niibcite}. By default
+% this is \cmd{\cite}, but can be altered, for example
+% |\renewcommand{\niibcite}{\citep}| if using |natbib|.
+%
+%\DescribeMacro{\niibprefix}
+% The temporary BibTeX database used to store the notes has the
+% default name |niib-\jobname.bib|. The prefix (``\niibprefix'') can
+% be altered by redefining \cmd{\niibprefix}.
+%
+%\DescribeMacro{\niibrecord}
+%\DescribeMacro{\niibfield}
+% When the notes database is written, each record is saved as type
+% \texttt{\niibrecord}, and the text is stored in a
+% \texttt{\niibfield} field. Both of these can be altered by
+% redefining \cmd{\niibrecord} and \cmd{\niibfield}. This could be
+% useful with a bibliography style that has an explicit ``Notes''
+% record type, for example \bibnote{The |rsc| and |achemso| packages
+% contain styles of this type.}.
+%
+% |notes2bib| attempts to maintain the correct ordering of notes with
+% sorted bibliography styles. This is done by setting up suitable
+% information in the temporary database to ensure correct sorting.
+% The mechanism for this is available for modification.
+%
+%\DescribeMacro{\niibkeyhead}
+%\DescribeMacro{\niibkeynone}
+%\DescribeMacro{\niibkeytail}
+% For users of standard bibliography styles, this is achieved by
+% generating a |key| field in the database, containing the label used
+% for the note. When using the |head| or |tail| option, this is
+% prefixed by \texttt{\niibkeyhead} or \texttt{\niibkeytail},
+% respectively. The prefix can be altered by redefining
+% \cmd{\niibkeyhead} or \cmd{\niibkeytail}, for example when
+% numerical labels need to be taken into account. The package also
+% provides a \cmd{\niibkeynone} macro, which defaults to an empty
+% prefix.
+%
+%\DescribeMacro{\niibpresorthead}
+%\DescribeMacro{\niibpresortnone}
+%\DescribeMacro{\niibpresorttail}
+% When using |biblatex|, the |presort| field can be used to control
+% sorting of the citations. Again, three macros
+% \cmd{\niibpresorthead}, \cmd{\niibpresortnone} and
+% \cmd{\niibpresorttail} are provided, which are used in the correct
+% context. The default values of \texttt{\niibpresorthead},
+% \texttt{\niibpresortnone} and \texttt{\niibpresorttail},
+% respectively, are designed to achieve the desired effect while
+% allowing the user full control of sorting.
+%
+%\section{Special effects}
+%
+%\DescribeMacro{\Percent}
+% As explained in the description of the |killpercent| option, the
+% default behaviour of the package is to treat the \% sign as a
+% comment marker, as normal. However, no ``escape'' is available
+% while writing the note to file, and so |\%| will also start a
+% comment. The package therefore provides the \cmd{\Percent} macro
+% to produce the percentage sign in notes \bibnote{There is no
+% perfect way of getting unexpanded output from TeX. The
+% |\unexpanded| e-TeX primitive, for example, adds extra spaces to
+% control sequences. The package author thinks that having to type
+% |\Percent| to get \Percent is the least inconvenient solution.}.
+%
+%\DescribeMacro{\flushcitestack}
+% When using the |head| or |tail| options, citations are added to a
+% stack as they are made. This stack is then flushed to the |.aux|
+% file at the end of the document. If references are given by
+% chapter (or other unit), this may not give the desired effect. The
+% \cmd{\flushcitestack} macro will cause all saved citations to be
+% written at that point, and will reset the stack for continued use.
+% This can therefore be used to control when citation occurs.
+%
+%\DescribeMacro{\delaycite}
+% When using the |head| option, normal citations have to be saved to
+% the stack described above. This requires the modification of the
+% citation commands. By default, |notes2bib| modifies the
+% \cmd{\cite} command and most of the standard citation commands of
+% |natbib| and |biblatex| \bibnote{Notice that |\nocite| is not
+% modified}. However, if problems are encountered with citation
+% order, the user can use the \cmd{\delaycite} macro to patch any
+% arbitrary citation command. This macro takes a single argument
+% \marg{macro-name}, which is the name of the citation command to
+% modify \emph{minus} the leading backslash. For example, the
+% \cmd{\cite} command is patched using |\delaycite{cite}|. The
+% \cmd{\delaycite} macro checks that a citation command is not
+% already modified, and so may be used again on the same command with
+% no ill effects.
+%
+% If a sorted bibliography style is in use, and more than nine notes
+% are created, the sort order will be incorrect. This is because by
+% default |notes2bib| does not pad the automatically-created labels
+% with zeros. To get the correct sort order, \cmd{\thebibnote}
+% should be redefined:
+%\begin{verbatim}
+%\renewcommand*{\thebibnote}{%
+% \bibnotename%
+% \ifnum\value{bibnote} < 9 0\fi%
+% \the\value{bibnote}%
+%}
+%\end{verbatim}
+%
+%\section{Known issues}
+%
+% Currently, when using the |head| option citations can take only one
+% optional argument. This is fine for normal citation styles, but
+% means that |biblatex| users may have some issues. The package
+% author will look again at this if it is a serious problem. A work
+% around is to cite as follows (here assuming you wish to use the
+% ``\cmd{\mycite}'' command):
+%\begin{verbatim}
+%\makeatletter
+% \begingroup
+% \@fileswfalse
+% \niib@orig@mycite[argument-one][argument-two]{citation}
+% \endgroup
+% \edef\niib@stack{\niib@stack,citation}
+%\makeatother
+%\end{verbatim}
+% Where ``argument-one,'' ``argument-two'' and ``citation'' should be
+% altered to the desired information.
+%
+% Users of |cite| will find that |notes2bib| does not move citations
+% for notes to after punctuation. The note will be cited where it
+% is given in the source.
+%
+% |biblatex| does not like notes that contain verbatim text. This is
+% due to the methods |biblatex| employs to work. Currently, there
+% does not seem to be a great deal |notes2bib| can do about this.
+%
+%\bibliographystyle{unsrt}
+%\renewcommand*{\refname}{Notes}
+%\StopEventually{\printbibnotes}
+%
+%\section{The mechanism}
+% The mechanism for positioning notes in the bibliography is somewhat
+% involved. Rather than expect interested users to read all of the
+% code that follows, a condensed overview is given here. The
+% thinking behind the system used is explained first, by considering
+% the |endnotes| package and REVTeX class. Both of these provided
+% inspiration for this package.
+%
+%\subsection{The \texttt{endnotes} approach}
+% The |endnotes| package \bibnote{%
+% \url{http://tug.ctan.org/macros/latex/contrib/misc/endnotes.sty}}
+% allows the user to generate endnotes in the same way as footnotes.
+% In |endnotes|, the text of the note is written to a |.ent| file.
+% This is achieved in an unexpanded form using the \cmd{\meaning} TeX
+% primitive. To produce the list of endnotes, this file is read back
+% into LaTeX, with the extra information \cmd{\meaning} also writes
+% being stripped off in the process.
+%
+% This method is relativity simple in concept, but obviously does
+% not integrate with BibTeX. The use of \cmd{\meaning} for unexpanded
+% output also means that information requires further processing before
+% it can be included in the bibliography.
+%
+%\subsection{The REVTeX approach}
+% REVTeX takes a similar approach to creating endnotes, but also
+% allows footnotes to be converted into endnotes. This results in a
+% file containing all of the non-literature citations in a document
+% in a single external file (in this case a |.end| file). REVTeX
+% also uses a different method to achieve unexpanded output, meaning
+% that several macros are not ``active'' in notes.
+%
+% The second part of the REVTeX approach is to (optionally) read the
+% notes back into the document. This is achieved by modifying the
+% \cmd{\bibliography} environment to output each note in the
+% bibliography. This takes place \emph{en masse}, after the normal
+% citations.
+%
+% REVTeX makes a number of modifications to LaTeX, and is dependent
+% on using |natbib|. The method used is also not compatible with
+% interspersing normal citations and notes.
+%
+%\subsection{The \texttt{notes2bib} approach}
+%
+% In |notes2bib|, notes are again written to an external file.
+% However, in contrast to the methods those outlined above,
+% |notes2bib| writes its output in the well-known BibTeX database
+% format. All of the note text is written almost completely
+% unexpanded to the file, the only requirement being that the braces
+% match within the argument \bibnote{Many thanks to Ulrich Diez for
+% the code to achieve the unexpanded writing.}. Notice that by
+% default the \% character still acts as a comment marker. Percentage
+% signs in the notes database would cause problems on reading the data
+% back in after running BibTeX.
+%
+% Each note results in a citation being placed by |notes2bib| in the
+% |.aux| file. The \cmd{\bibliography} command is also modified so
+% that the new database will be used by BibTeX. After the BibTeX run,
+% the note text will appear in the |.bbl| file, in the same way as
+% any other citation. Using an unsorted BibTeX style, this results
+% in notes interspaced with the normal citations. For sorted styles,
+% |notes2bib| allows various methods for controlling the placement of
+% notes, based on writing appropriate fields in the BibTeX database.
+%
+% The |head| and |tail| options use an additional technique. Both
+% delay writing of selected citations (either notes or real ones)
+% into the |.aux| file, to control citation position in unsorted
+% bibliographies.
+%
+%\iffalse
+%<*package>
+%\fi
+%\section{The package code}
+%
+%\subsection{Package setup code}
+%
+% The package starts with the usual identification code.
+% \begin{macrocode}
+\NeedsTeXFormat{LaTeX2e}
+\ProvidesPackage{notes2bib}
+ [2007/08/30 v1.0 Integrating notes into the bibliography]
+\RequirePackage{xspace}
+% \end{macrocode}
+% Option processing takes place. Redefining \cmd{\footnote} or
+% \cmd{\endnote} is delayed until the start of the document, to avoid
+% the danger of other packages being loaded and overwriting this.
+% \begin{macrocode}
+\newif\ifniib@fn\niib@fnfalse
+\DeclareOption{footnotes}{%
+ \niib@fntrue
+ \AtBeginDocument{%
+ \let\footnote\bibnote%
+}}
+\DeclareOption{endnotes}{%
+ \AtBeginDocument{%
+ \let\endnote\bibnote%
+ \let\endnotemark\bibnotemark%
+ \let\endnotetext\bibnotetext%
+% \end{macrocode}
+% If the user has used the |endnotes| package, they may still have
+% \cmd{\theendnotes} commands in their source. So this is defined to
+% print out all of the bibnotes.
+% \begin{macrocode}
+ \@ifpackageloaded{endnotes}%
+ {\let\theendnotes\printbibnotes}{}%
+}}
+% \end{macrocode}
+% Stephen Dalton suggested an option for all notes to come after
+% ``real'' citations. This is done here, along with a mirror options
+% to have all for the citations come first.
+% \begin{macrocode}
+\newif\ifniib@tail\niib@tailfalse
+\newif\ifniib@head\niib@headfalse
+\DeclareOption{tail}{\niib@tailtrue}
+\DeclareOption{head}{\niib@headtrue}
+% \end{macrocode}
+%\begin{macro}{\niib@percent}
+% For handling percentage signs in notes, an option is needed
+% to alter handling.
+% \begin{macrocode}
+\def\niib@percent{\catcode`\%=14\relax}
+\DeclareOption{killpercent}{%
+ \def\niib@percent{\catcode`\%=9\relax}
+}
+% \end{macrocode}
+% For |.dtx| files, the |killpercent| option is necessary.
+% \begin{macrocode}
+\@ifclassloaded{ltxdoc}{\ExecuteOptions{killpercent}}{}
+% \end{macrocode}
+%\end{macro}
+% Finally, the options are put into effect.
+% \begin{macrocode}
+\ProcessOptions
+% \end{macrocode}
+%
+% If the |footnote| option is active, there is some work to do
+% because of the \cmd{\thanks} macro.
+% \begin{macrocode}
+\ifniib@fn
+% \end{macrocode}
+% The \cmd{\thanks} macro can only be patched if e-TeX extensions are
+% available. This is because |elatex| is used for the actual
+% patching.
+% \begin{macrocode}
+ \@ifundefined{eTeXversion}{%
+ \PackageWarning{notes2bib}{%
+ e-TeX extensions unavailable\MessageBreak
+ \protect\footnotemark and \protect\footnotetext%
+ \MessageBreak unmodified}%
+ }{%
+% \end{macrocode}
+%\begin{macro}{\niib@fnmark}
+%\begin{macro}{\niib@fntext}
+%\begin{macro}{\niib@thanks}
+% With e-TeX available, the |elatex| package can be used to do the
+% patching needed. Firstly, it is necessary to back up the original
+% definitions for \cmd{\footnotetext} and \cmd{\footnotetext}. The
+% \cmd{\thanks} macro is also backed up.
+% \begin{macrocode}
+ \let\niib@fnmark\footnotemark
+ \let\niib@fntext\footnotetext
+ \let\niib@thanks\thanks
+% \end{macrocode}
+%\end{macro}
+%\end{macro}
+%\end{macro}
+%\begin{macro}{\thanks}
+% Now the \cmd{\thanks} command is patched to use the saved
+% definitions. The patching is nested so that everything has to go
+% right before things are finalised.
+% \begin{macrocode}
+ \RequirePackage{elatex}
+ \patchcmd{\thanks}{\footnotemark}{\niib@fnmark}{%
+ \patchcmd{\thanks}{\footnotetext}{\niib@fntext}{%
+ \AtBeginDocument{%
+ \let\footnotemark\bibnotemark
+ \let\footnotetext\bibnotetext
+ }%
+ }%
+% \end{macrocode}
+% Thinks have gone wrong if the following lines are reached. So everything
+% is put back to normal.
+% \begin{macrocode}
+ {\let\thanks\niib@thanks%
+ \PackageWarning{notes2bib}%
+ {Could not patch \protect\thanks}}%
+ }{%
+ \let\thanks\niib@thanks%
+ \PackageWarning{notes2bib}%
+ {Could not patch \protect\thanks}}%
+ }%
+\fi
+% \end{macrocode}
+%\end{macro}
+%
+% The |head| and |tail| options are mutually exclusive, so a check is
+% made that both have not been selected. If they have, the package
+% ignores both options after a suitable warning.
+% \begin{macrocode}
+\ifniib@head
+ \ifniib@tail
+ \PackageWarning{notes2bib}
+ {You've given both ``head'' and ``tail'' as
+ options\MessageBreak
+ I'm ignoring both!}
+ \niib@headfalse\niib@tailfalse
+ \fi
+\fi
+% \end{macrocode}
+% For the |head| option, the normal citation commands are modified to
+% get the necessary delay in writing to the |.aux| file.
+% \begin{macrocode}
+\AtBeginDocument{%
+ \ifniib@head
+% \end{macrocode}
+% The \cmd{\cite} command is always defined, so it can be redefined in all
+% cases.
+% \begin{macrocode}
+ \delaycite{cite}%
+% \end{macrocode}
+% If |natbib| is loaded, there a several citation commands that will
+% definitely be defined. They are all run through \cmd{\delaycite}.
+% \begin{macrocode}
+ \@ifpackageloaded{natbib}{%
+ \delaycite{citet}%
+ \delaycite{citep}%
+ \delaycite{citenum}%
+ \delaycite{citealt}%
+ \delaycite{citealp}%
+ \delaycite{citetext}%
+ \delaycite{citeauthor}%
+ \delaycite{citeyear}%
+ \delaycite{citeyearpar}%
+ \delaycite{Citet}%
+ \delaycite{Citep}%
+ \delaycite{Citealt}%
+ \delaycite{Citealp}%
+ \delaycite{Citeauthor}%
+ }{%
+% \end{macrocode}
+% For |biblatex|, some citation commands are always defined.
+% \begin{macrocode}
+ \@ifpackageloaded{biblatex}{%
+ \delaycite{Cite}%
+ \delaycite{parencite}%
+ \delaycite{Parencite}%
+ \delaycite{footcite}%
+ \delaycite{Footcite}%
+ \delaycite{textcite}%
+ \delaycite{Textcite}%
+% \end{macrocode}
+% Now there are several citation commands that may be defined. As
+% |biblatex| requires e-TeX, the |\ifdefined| primitive can be
+% used.
+% \begin{macrocode}
+ \ifdefined\autocite%
+ \delaycite{autocite}%
+ \fi%
+ \ifdefined\supercite%
+ \delaycite{supercite}%
+ \fi%
+ }{}%
+ }%
+ \fi%
+}
+% \end{macrocode}
+%
+%\subsection{User configuration macros}
+%
+% The |notes2bib| package makes quite a number of configuration
+% defaults available as macros. These are all set up here. Most of
+% these are of the form \texttt{\textbackslash niib\dots}, as in the
+% main they are unlikely to be altered by most users.
+%
+%\begin{macro}{\bibnotename}
+% By default, all of the new citations take the prefix
+% ``\bibnotename.'' The default can be altered, and this is set up
+% here.
+% \begin{macrocode}
+\newcommand*\bibnotename{Bibnote}
+% \end{macrocode}
+%\end{macro}
+%\begin{macro}{\thebibnote}
+% A counter is needed for the notes created. In analogy to other
+% counters in LaTeX, this is given a \texttt{\textbackslash
+% the\dots} name. The user should not really need to use this
+% macro, but convention dictate that it has a user-space name.
+% \begin{macrocode}
+\newcounter{bibnote}
+\renewcommand*{\thebibnote}{\bibnotename\the\value{bibnote}}
+% \end{macrocode}
+%\end{macro}
+%\begin{macro}{\niibprefix}
+% The package works by creating a new BibTeX database file containing
+% the notes. By default, this fix is called
+% \texttt{\niibprefix\textbackslash jobname.bib}, but the prefix may
+% be altered by redefining \cmd{\niibprefix}. The default follows
+% the pattern used by the |biblatex| package (which uses |blx-|).
+% \begin{macrocode}
+\newcommand*\niibprefix{niib-}
+% \end{macrocode}
+%\end{macro}
+%
+%\begin{macro}{\niibrecord}
+%\begin{macro}{\niibfield}
+% When creating the temporary database of notes, the BibTeX records
+% created are of record type \cmd{\niibrecord}, and the notes are
+% stored in the \cmd{\niibfield} field type. For some BibTeX styles,
+% a better choice than the defaults (\texttt{\niibrecord} and
+% \texttt{\niibfield}, respectively) may be available. Thus the
+% values used are definable.
+% \begin{macrocode}
+\newcommand*\niibrecord{Misc}
+\newcommand*\niibfield{note}
+% \end{macrocode}
+%\end{macro}
+%\end{macro}
+%\begin{macro}{\niibpresorthead}
+%\begin{macro}{\niibpresortnone}
+%\begin{macro}{\niibpresorttail}
+% When using |biblatex|, sorting can be controlled using the
+% |presort| field. Default values to be used are given here; these
+% are ``soft'' as |biblatex| allows much more definite pushing to the
+% top and bottom of the sorted list.
+% \begin{macrocode}
+\newcommand*\niibpresorthead{ml}
+\newcommand*\niibpresortnone{mm}
+\newcommand*\niibpresorttail{mn}
+% \end{macrocode}
+%\end{macro}
+%\end{macro}
+%\end{macro}
+%\begin{macro}{\niibkeyhead}
+%\begin{macro}{\niibkeynone}
+%\begin{macro}{\niibkeytail}
+% For traditional BibTeX styles, the |key| field can be used to
+% influence the sort order. Default values to alter sorting are
+% given here, but may need to be altered for other languages and so
+% on.
+% \begin{macrocode}
+\newcommand*\niibkeyhead{aaa}
+\newcommand*\niibkeynone{}
+\newcommand*\niibkeytail{zzz}
+% \end{macrocode}
+%\end{macro}
+%\end{macro}
+%\end{macro}
+%
+%\begin{macro}{\niibcite}
+% Bibliography notes are marked by citations, like any other
+% bibliography entry. The citation command use is controlled here.
+% \begin{macrocode}
+\newcommand*\niibcite{\cite}
+% \end{macrocode}
+%\end{macro}
+%
+%\subsection{User macros}
+%
+%\begin{macro}{\bibnote}
+% Each new bibnote increments the note counter, then checks for an
+% optional label, before handing off to the internal macro
+% \cmd{\niib@bibnote}.
+% \begin{macrocode}
+\DeclareRobustCommand\bibnote{%
+ \stepcounter{bibnote}%
+ \@ifnextchar[%
+ {\niib@bibnote}%
+ {\niib@bibnote[\thebibnote]}%
+}
+% \end{macrocode}
+%\end{macro}
+%\begin{macro}{\bibnotemark}
+% The \cmd{\bibnotemark} macro works in the same way as
+% \cmd{\bibnote}, but calls \cmd{\niib@mark} rather than
+% \cmd{\niib@bibnote}.
+% \begin{macrocode}
+\DeclareRobustCommand\bibnotemark{%
+ \stepcounter{bibnote}%
+ \@ifnextchar[%
+ {\niib@mark}%
+ {\niib@mark[\thebibnote]}%
+}
+% \end{macrocode}
+%\end{macro}
+%\begin{macro}{\bibnotetext}
+% The text companion to the mark macro above, with no increment of
+% the counter.
+% \begin{macrocode}
+\DeclareRobustCommand\bibnotetext{%
+ \@ifnextchar[%
+ {\niib@text}%
+ {\niib@text[\thebibnote]}%
+}
+% \end{macrocode}
+%\end{macro}
+%\begin{macro}{\printbibnotes}
+% To allow for the possibility of there being no other notes, a
+% command to print only notes is given. In the |biblatex| case, the
+% best that can be done is to issue \cmd{\printbibliography}.
+% \begin{macrocode}
+\@ifpackageloaded{biblatex}{%
+ \let\printbibnotes\printbibliography%
+}{%
+ \newcommand*{\printbibnotes}{\niib@bib%
+ {\niibprefix\jobname}}%
+}%
+% \end{macrocode}
+%\end{macro}
+%\begin{macro}{\flushcitestack}
+% In order to delay citations to the end of the bibliography (and
+% thus force others to the start), a ``stack'' is created of
+% citations which need to be written to the |.aux| file. This
+% is done here, and the stack is cleared so collection can begin
+% again.
+% \begin{macrocode}
+\newcommand*\flushcitestack{%
+ \ifx\niib@stack\relax\else%
+ \expandafter\nocite\expandafter{\niib@stack}%
+ \global\let\niib@stack\relax%
+ \fi%
+}
+% \end{macrocode}
+%\end{macro}
+%
+%\begin{macro}{\delaycite}
+% Normal citations have to be stacked up in the stack when in
+% ``head'' mode. To do this, the citation command has to be modified
+% to do this, while leaving note citations alone. The trick used in
+% this is to set \cmd{\@filesw} to false while the citation takes
+% place.
+% \begin{macrocode}
+\newcommand*\delaycite[1]{%
+ \expandafter\ifx\csname niib@orig@#1\endcsname\@undefined%
+ \expandafter\expandafter\expandafter\let\expandafter%
+ \csname niib@orig@#1\expandafter\endcsname\csname #1\endcsname%
+ \expandafter\renewcommand\csname #1\endcsname[2][\relax]{%
+% \end{macrocode}
+% If a note is being cited, then there will be no optional argument,
+% and |##1| will expand to \cmd{\relax}.
+% \begin{macrocode}
+ \ifniib@cn%
+ \csname niib@orig@#1\endcsname{##2}%
+ \else%
+ \begingroup%
+ \@fileswfalse%
+% \end{macrocode}
+% If an optional argument has been given, then |##1| will expand to
+% something other than \cmd{\relax}. So the original citation
+% command is called with the optional argument.
+% \begin{macrocode}
+ \ifx##1\relax%
+ \csname niib@orig@#1\endcsname{##2}%
+ \else%
+ \csname niib@orig@#1\endcsname[##1]{##2}%
+ \fi%
+ \endgroup%
+ \edef\niib@temp{##2}%
+ \ifx\niib@stack\relax%
+ \xdef\niib@stack{\niib@temp}%
+ \else%
+ \xdef\niib@stack{\niib@stack,\niib@temp}%
+ \fi%
+ \fi%
+ }%
+ \else%
+ \PackageInfo{notes2bib}%
+ {Citation type ``#1'' already delayed}%
+ \fi%
+}
+% \end{macrocode}
+%\end{macro}
+%
+%\begin{macro}{\Percent}
+% Finally, a way of producing a percentage sign in note is needed.
+% This is because inside the note, no method for escaping a comment
+% is available.
+% \begin{macrocode}
+\newcommand*{\Percent}{\%\xspace}
+% \end{macrocode}
+%\end{macro}
+%
+%\subsection{Internal setup macros}
+%
+%\begin{macro}{\niib@keyname}
+% If |biblatex| is in use, the key field in the BibTeX database
+% should be called ``keysort,'' whereas otherwise it should be
+% ``key.''
+% \begin{macrocode}
+\@ifpackageloaded{biblatex}
+ {\def\niib@keyname{keysort}}
+ {\def\niib@keyname{key}}
+% \end{macrocode}
+%\end{macro}
+%\begin{macro}{\niib@presort}
+%\begin{macro}{\niib@key}
+% The values taken by \cmd{\niib@presort} and \cmd{\niib@key} depend
+% on the desired positioning of notes in the bibliography.
+% \begin{macrocode}
+\ifniib@head
+ \def\niib@presort{\niibpresorthead}
+ \def\niib@key{\niibkeyhead}
+\else
+ \ifniib@tail
+ \def\niib@presort{\niibpresorttail}
+ \def\niib@key{\niibkeytail}
+ \else
+ \def\niib@presort{\niibpresortnone}
+ \def\niib@key{\niibkeynone}
+ \fi
+\fi
+% \end{macrocode}
+%\end{macro}
+%\end{macro}
+%
+%\begin{macro}{\niib@msg}
+% To inform the user, the automatically-created BibTeX database needs
+% to carry suitable information on its source.
+% \begin{macrocode}
+\edef\niib@msg{%
+ This is an auxiliary file used by the `notes2bib' package.^^J%
+ This file may safely be deleted. It will be recreated as
+ required.^^J}
+% \end{macrocode}
+%\end{macro}
+%
+%\begin{macro}{\niib@stack}
+% This macro is needed to store any citations at the end of the
+% bibliography. Initially, this expands to \cmd{\relax}.
+% \begin{macrocode}
+\let\niib@stack\relax
+% \end{macrocode}
+%\end{macro}
+%
+% A switch is needed to tell if a note is being cited when using
+% ``head'' mode.
+% \begin{macrocode}
+\newif\ifniib@cn\niib@cnfalse
+% \end{macrocode}
+%
+%\subsection{Internal macros}
+%
+%\begin{macro}{\niib@text}
+% Here the label and the text for the note are separated out before
+% writing to the bibliography file.
+% \begin{macrocode}
+\long\def\niib@text[#1]{%
+ \niib@@text{#1}%
+}
+% \end{macrocode}
+%\end{macro}
+%\begin{macro}{\niib@bibnote}
+% Very similar processing to \cmd{\niib@text} is carried out here,
+% but in this case a citation is also added to the file.
+% \begin{macrocode}
+\long\def\niib@bibnote[#1]{%
+ \niib@citenote{#1}%
+ \niib@@text{#1}%
+}
+% \end{macrocode}
+%\end{macro}
+%\begin{macro}{\niib@mark}
+% If only a mark is asked for, this is simply converted into a
+% citation. This cannot be done directly as the optional has to be
+% processed correctly.
+% \begin{macrocode}
+\def\niib@mark[#1]{\niib@citenote{#1}}
+% \end{macrocode}
+%\end{macro}
+%
+%\begin{macro}{\niib@citenote}
+% To allow the notes to ``tail'' the real citations, a special
+% version of the \cmd{\cite} command is needed that can allow
+% delaying writing the \cmd{\citation} command to the aux file.
+% \begin{macrocode}
+\def\niib@citenote#1{%
+ \niib@cntrue%
+% \end{macrocode}
+%\begin{macro}{\niib@temp}
+% \cmd{\niib@temp} is needed to hold the expanded citation.
+% \begin{macrocode}
+ \edef\niib@temp{#1}%
+% \end{macrocode}
+% If ``tail''-ing is needed, the \texttt{\textbackslash cite\dots}
+% command is told not to write to the |.aux| file using
+% \cmd{\@filesw}.
+% \begin{macrocode}
+ \ifniib@tail%
+ \begingroup%
+ \@fileswfalse%
+ \niibcite{#1}%
+ \endgroup%
+% \end{macrocode}
+% The citation is added to the stack for writing later.
+% \cmd{\niib@stack} will always expand to \cmd{\relax} if it is
+% empty.
+% \begin{macrocode}
+ \ifx\niib@stack\relax%
+ \xdef\niib@stack{\niib@temp}%
+ \else%
+ \xdef\niib@stack{\niib@stack,\niib@temp}%
+ \fi%
+ \else%
+% \end{macrocode}
+% When tailing is not in operation, writing takes place as normal.
+% The run of \cmd{\expandafter}s is needed to close the |\if|
+% cleanly.
+% \begin{macrocode}
+ \expandafter\niibcite\expandafter%
+ {\expandafter\niib@temp\expandafter}%
+ \fi%
+ \niib@cnfalse%
+}%
+% \end{macrocode}
+%\end{macro}
+%\end{macro}
+%
+% The next set of macros provides the direct writing of the
+% unexpanded note to file. The code is a modified from a usenet post
+% by Ulrich Diez at |comp.text.tex|, but with everything stripped
+% down to do just what is needed here. The package author takes
+% responsibility for the code eating your socks!
+%
+%\begin{macro}{\niib@verbtext}
+%\begin{macro}{\niib@@verbtext}
+%\begin{macro}{\niib@tempa}
+% The two macros here set up the necessary catcode changes and
+% grouping. Notice that they do not have the note text as an
+% argument. That is left to \cmd{\niib@tempa}
+% \begin{macrocode}
+\newcommand\niib@verbtext[2][\ignorespaces]{%
+ \begingroup%
+ \let\do\@makeother\dospecials%
+ \catcode`\{=1\relax%
+ \catcode`\}=2\relax%
+ \niib@@verbtext{#1}{#2}%
+}%
+\newcommand\niib@@verbtext[2]{%
+ \begingroup%
+ \long\def\niib@tempa##1{%
+ \def\niib@tempa{##1}%
+ \@onelevel@sanitize\niib@tempa%
+ \expandafter\endgroup%
+ \expandafter\def%
+ \expandafter#2%
+ \expandafter{%
+ \niib@tempa}%
+ #1%
+ }%
+% \end{macrocode}
+% New lines are set to be spaces.
+% \begin{macrocode}
+ \catcode`\^^M=10\relax%
+% \end{macrocode}
+% Unlike the ``real'' unexpanded write, the catcode of \texttt{\%}
+% needs to be something that will be safe, so that comments do not
+% cause problems. There is no escape character, so an alternative
+% method for printing \% is given elsewhere in the package. For
+% |dtx| files and so on, this will not work. So an option is
+% needed to ignore percentage signs entirely.
+% \begin{macrocode}
+ \niib@percent%
+ \expandafter\endgroup%
+ \niib@tempa%
+}%
+% \end{macrocode}
+%\end{macro}
+%\end{macro}
+%\end{macro}
+%\begin{macro}{\niib@write}
+% This provides the access end of the unexpanded write. Once again,
+% the note is not an argument.
+% \begin{macrocode}
+\newcommand*\niib@write{%
+ \@bsphack%
+ \begingroup%
+ \niib@verbtext[\niib@@write\ignorespaces]\niib@tempa%
+}%
+% \end{macrocode}
+%\end{macro}
+%\begin{macro}{\niib@@write}
+% Writing actually takes place here. In order to get all of the code
+% needed into the |.bib| file, it is set out here. Thus this macro
+% is the specialised part of the mechanism.
+% \begin{macrocode}
+\newcommand*\niib@@write[1]{%
+ \immediate\write\niib@out{%
+ @\niibrecord\string{\niib@tempb,^^J%
+ presort = \string{\niib@presort\string},^^J%
+ \niib@keyname\space= \string{\niib@key\niib@tempb\string},^^J%
+ \niibfield\space= \string{\niib@tempa\string}^^J%
+ \string}^^J}%
+ \endgroup%
+ \@esphack%
+}%
+% \end{macrocode}
+%\end{macro}
+%
+%\begin{macro}{\niib@@text}
+% The ``business end'' of writing the notes to file.
+% \begin{macrocode}
+\long\def\niib@@text#1{%
+% \end{macrocode}
+%\begin{macro}{\niib@out}
+%\begin{macro}{\niib@stream}
+% If this is the first note, then a new output stream is needed,
+% otherwise it will already be open.
+% \begin{macrocode}
+ \ifx\niib@out\@undefined%
+ \newwrite\niib@out%
+ \gdef\niib@stream{\niibprefix\jobname.bib}%
+ \immediate\openout\niib@out\niib@stream\relax%
+% \end{macrocode}
+% The new file starts with the message that it has been automatically
+% generated by |notes2bib|.
+% \begin{macrocode}
+ \immediate\write\niib@out{\niib@msg}%
+ \fi%
+% \end{macrocode}
+%\end{macro}
+%\end{macro}
+%\begin{macro}{\niib@tempb}
+% As long files are being written, \cmd{\niib@tempb} is used to
+% store the label, before calling the \cmd{\niib@write} macro to
+% output the note text. \cmd{\niib@write} will pick up the next
+% thing in the input, which should be the grouped note text.
+% \begin{macrocode}
+ \if@filesw%
+ \edef\niib@tempb{#1}%
+ \expandafter\niib@write%
+ \fi%
+}
+% \end{macrocode}
+%\end{macro}
+%\end{macro}
+%
+% The \cmd{\bibliography} macro is patached to ensure that when it is
+% executed the note file is also processed. |biblatex| does things
+% very differently, but this actually makes it much easier to patch
+% for.
+% \begin{macrocode}
+\@ifpackageloaded{biblatex}{%
+ \expandafter\bib@gadd\expandafter\blx@bibfiles\expandafter%
+ {\niibprefix\jobname}%
+ }{%
+% \end{macrocode}
+%\begin{macro}{\niib@bib}
+%\begin{macro}{\bibliography}
+% The bibliography command is patched so that it will run on the
+% automatically-generated BibTeX database.
+% \begin{macrocode}
+ \let\niib@bib\bibliography%
+ \renewcommand{\bibliography}[1]{%
+ \ifnum\the\value{bibnote} > \z@%
+ \niib@bib{\niibprefix\jobname,#1}%
+ \else%
+ \niib@bib{#1}%
+ \fi}}%
+% \end{macrocode}
+%\end{macro}
+%\end{macro}
+%%
+% At the end of the document, any delayed citations are written to the
+% |.aux| file, and the database file is closed cleanly.
+% \begin{macrocode}
+\AtEndDocument{%
+ \flushcitestack%
+ \ifx\niib@out\@undefined\else%
+ \immediate\closeout\niib@out%
+ \fi%
+}
+% \end{macrocode}
+%
+%\iffalse
+%</package>
+%\fi
+% \PrintChanges
+% \PrintIndex
+% \Finale
+%
diff --git a/Master/texmf-dist/source/latex/notes2bib/notes2bib.ins b/Master/texmf-dist/source/latex/notes2bib/notes2bib.ins
new file mode 100644
index 00000000000..27bf9c5683a
--- /dev/null
+++ b/Master/texmf-dist/source/latex/notes2bib/notes2bib.ins
@@ -0,0 +1,33 @@
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+%
+% notes2bib is free software; you can redistribute it and/or modify it
+% under the terms of the GNU General Public License as published by
+% the Free Software Foundation; either version 2, or (at your option)
+% any later version.
+%
+% notes2bib is distributed in the hope that it will be useful, but
+% WITHOUT ANY WARRANTY; without even the implied warranty of
+% MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+% GNU General Public License for more details.
+%
+% You should have received a copy of the GNU General Public License
+% along with this program. If not, see
+% <http://www.gnu.org/licenses/>.
+%
+%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+\input docstrip.tex
+\askonceonly
+\preamble
+ ----------------------------------------------------------------
+ note2bib --- Integrating notes into the bibliography
+ Maintained by Joseph Wright
+ E-mail: joseph.wright@morningstar2.co.uk
+ Released under the GNU General Public License
+ See http://www.gnu.org/licenses/gpl.txt
+ ----------------------------------------------------------------
+\endpreamble
+\Msg{Generating notes2bib files:}
+\usedir{tex/latex/contib/notes2bib}
+\generate{\file{notes2bib.sty}{\from{notes2bib.dtx}{package}}
+}
+\endbatchfile
diff --git a/Master/texmf-dist/tex/latex/notes2bib/notes2bib.sty b/Master/texmf-dist/tex/latex/notes2bib/notes2bib.sty
new file mode 100644
index 00000000000..6046f97398f
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/notes2bib/notes2bib.sty
@@ -0,0 +1,307 @@
+%%
+%% This is file `notes2bib.sty',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% notes2bib.dtx (with options: `package')
+%% ----------------------------------------------------------------
+%% note2bib --- Integrating notes into the bibliography
+%% Maintained by Joseph Wright
+%% E-mail: joseph.wright@morningstar2.co.uk
+%% Released under the GNU General Public License
+%% See http://www.gnu.org/licenses/gpl.txt
+%% ----------------------------------------------------------------
+\NeedsTeXFormat{LaTeX2e}
+\ProvidesPackage{notes2bib}
+ [2007/08/30 v1.0 Integrating notes into the bibliography]
+\RequirePackage{xspace}
+\newif\ifniib@fn\niib@fnfalse
+\DeclareOption{footnotes}{%
+ \niib@fntrue
+ \AtBeginDocument{%
+ \let\footnote\bibnote%
+}}
+\DeclareOption{endnotes}{%
+ \AtBeginDocument{%
+ \let\endnote\bibnote%
+ \let\endnotemark\bibnotemark%
+ \let\endnotetext\bibnotetext%
+ \@ifpackageloaded{endnotes}%
+ {\let\theendnotes\printbibnotes}{}%
+}}
+\newif\ifniib@tail\niib@tailfalse
+\newif\ifniib@head\niib@headfalse
+\DeclareOption{tail}{\niib@tailtrue}
+\DeclareOption{head}{\niib@headtrue}
+\def\niib@percent{\catcode`\%=14\relax}
+\DeclareOption{killpercent}{%
+ \def\niib@percent{\catcode`\%=9\relax}
+}
+\@ifclassloaded{ltxdoc}{\ExecuteOptions{killpercent}}{}
+\ProcessOptions
+\ifniib@fn
+ \@ifundefined{eTeXversion}{%
+ \PackageWarning{notes2bib}{%
+ e-TeX extensions unavailable\MessageBreak
+ \protect\footnotemark and \protect\footnotetext%
+ \MessageBreak unmodified}%
+ }{%
+ \let\niib@fnmark\footnotemark
+ \let\niib@fntext\footnotetext
+ \let\niib@thanks\thanks
+ \RequirePackage{elatex}
+ \patchcmd{\thanks}{\footnotemark}{\niib@fnmark}{%
+ \patchcmd{\thanks}{\footnotetext}{\niib@fntext}{%
+ \AtBeginDocument{%
+ \let\footnotemark\bibnotemark
+ \let\footnotetext\bibnotetext
+ }%
+ }%
+ {\let\thanks\niib@thanks%
+ \PackageWarning{notes2bib}%
+ {Could not patch \protect\thanks}}%
+ }{%
+ \let\thanks\niib@thanks%
+ \PackageWarning{notes2bib}%
+ {Could not patch \protect\thanks}}%
+ }%
+\fi
+\ifniib@head
+ \ifniib@tail
+ \PackageWarning{notes2bib}
+ {You've given both ``head'' and ``tail'' as
+ options\MessageBreak
+ I'm ignoring both!}
+ \niib@headfalse\niib@tailfalse
+ \fi
+\fi
+\AtBeginDocument{%
+ \ifniib@head
+ \delaycite{cite}%
+ \@ifpackageloaded{natbib}{%
+ \delaycite{citet}%
+ \delaycite{citep}%
+ \delaycite{citenum}%
+ \delaycite{citealt}%
+ \delaycite{citealp}%
+ \delaycite{citetext}%
+ \delaycite{citeauthor}%
+ \delaycite{citeyear}%
+ \delaycite{citeyearpar}%
+ \delaycite{Citet}%
+ \delaycite{Citep}%
+ \delaycite{Citealt}%
+ \delaycite{Citealp}%
+ \delaycite{Citeauthor}%
+ }{%
+ \@ifpackageloaded{biblatex}{%
+ \delaycite{Cite}%
+ \delaycite{parencite}%
+ \delaycite{Parencite}%
+ \delaycite{footcite}%
+ \delaycite{Footcite}%
+ \delaycite{textcite}%
+ \delaycite{Textcite}%
+ \ifdefined\autocite%
+ \delaycite{autocite}%
+ \fi%
+ \ifdefined\supercite%
+ \delaycite{supercite}%
+ \fi%
+ }{}%
+ }%
+ \fi%
+}
+\newcommand*\bibnotename{Bibnote}
+\newcounter{bibnote}
+\renewcommand*{\thebibnote}{\bibnotename\the\value{bibnote}}
+\newcommand*\niibprefix{niib-}
+\newcommand*\niibrecord{Misc}
+\newcommand*\niibfield{note}
+\newcommand*\niibpresorthead{ml}
+\newcommand*\niibpresortnone{mm}
+\newcommand*\niibpresorttail{mn}
+\newcommand*\niibkeyhead{aaa}
+\newcommand*\niibkeynone{}
+\newcommand*\niibkeytail{zzz}
+\newcommand*\niibcite{\cite}
+\DeclareRobustCommand\bibnote{%
+ \stepcounter{bibnote}%
+ \@ifnextchar[%
+ {\niib@bibnote}%
+ {\niib@bibnote[\thebibnote]}%
+}
+\DeclareRobustCommand\bibnotemark{%
+ \stepcounter{bibnote}%
+ \@ifnextchar[%
+ {\niib@mark}%
+ {\niib@mark[\thebibnote]}%
+}
+\DeclareRobustCommand\bibnotetext{%
+ \@ifnextchar[%
+ {\niib@text}%
+ {\niib@text[\thebibnote]}%
+}
+\@ifpackageloaded{biblatex}{%
+ \let\printbibnotes\printbibliography%
+}{%
+ \newcommand*{\printbibnotes}{\niib@bib%
+ {\niibprefix\jobname}}%
+}%
+\newcommand*\flushcitestack{%
+ \ifx\niib@stack\relax\else%
+ \expandafter\nocite\expandafter{\niib@stack}%
+ \global\let\niib@stack\relax%
+ \fi%
+}
+\newcommand*\delaycite[1]{%
+ \expandafter\ifx\csname niib@orig@#1\endcsname\@undefined%
+ \expandafter\expandafter\expandafter\let\expandafter%
+ \csname niib@orig@#1\expandafter\endcsname\csname #1\endcsname%
+ \expandafter\renewcommand\csname #1\endcsname[2][\relax]{%
+ \ifniib@cn%
+ \csname niib@orig@#1\endcsname{##2}%
+ \else%
+ \begingroup%
+ \@fileswfalse%
+ \ifx##1\relax%
+ \csname niib@orig@#1\endcsname{##2}%
+ \else%
+ \csname niib@orig@#1\endcsname[##1]{##2}%
+ \fi%
+ \endgroup%
+ \edef\niib@temp{##2}%
+ \ifx\niib@stack\relax%
+ \xdef\niib@stack{\niib@temp}%
+ \else%
+ \xdef\niib@stack{\niib@stack,\niib@temp}%
+ \fi%
+ \fi%
+ }%
+ \else%
+ \PackageInfo{notes2bib}%
+ {Citation type ``#1'' already delayed}%
+ \fi%
+}
+\newcommand*{\Percent}{\%\xspace}
+\@ifpackageloaded{biblatex}
+ {\def\niib@keyname{keysort}}
+ {\def\niib@keyname{key}}
+\ifniib@head
+ \def\niib@presort{\niibpresorthead}
+ \def\niib@key{\niibkeyhead}
+\else
+ \ifniib@tail
+ \def\niib@presort{\niibpresorttail}
+ \def\niib@key{\niibkeytail}
+ \else
+ \def\niib@presort{\niibpresortnone}
+ \def\niib@key{\niibkeynone}
+ \fi
+\fi
+\edef\niib@msg{%
+ This is an auxiliary file used by the `notes2bib' package.^^J%
+ This file may safely be deleted. It will be recreated as
+ required.^^J}
+\let\niib@stack\relax
+\newif\ifniib@cn\niib@cnfalse
+\long\def\niib@text[#1]{%
+ \niib@@text{#1}%
+}
+\long\def\niib@bibnote[#1]{%
+ \niib@citenote{#1}%
+ \niib@@text{#1}%
+}
+\def\niib@mark[#1]{\niib@citenote{#1}}
+\def\niib@citenote#1{%
+ \niib@cntrue%
+ \edef\niib@temp{#1}%
+ \ifniib@tail%
+ \begingroup%
+ \@fileswfalse%
+ \niibcite{#1}%
+ \endgroup%
+ \ifx\niib@stack\relax%
+ \xdef\niib@stack{\niib@temp}%
+ \else%
+ \xdef\niib@stack{\niib@stack,\niib@temp}%
+ \fi%
+ \else%
+ \expandafter\niibcite\expandafter%
+ {\expandafter\niib@temp\expandafter}%
+ \fi%
+ \niib@cnfalse%
+}%
+\newcommand\niib@verbtext[2][\ignorespaces]{%
+ \begingroup%
+ \let\do\@makeother\dospecials%
+ \catcode`\{=1\relax%
+ \catcode`\}=2\relax%
+ \niib@@verbtext{#1}{#2}%
+}%
+\newcommand\niib@@verbtext[2]{%
+ \begingroup%
+ \long\def\niib@tempa##1{%
+ \def\niib@tempa{##1}%
+ \@onelevel@sanitize\niib@tempa%
+ \expandafter\endgroup%
+ \expandafter\def%
+ \expandafter#2%
+ \expandafter{%
+ \niib@tempa}%
+ #1%
+ }%
+ \catcode`\^^M=10\relax%
+ \niib@percent%
+ \expandafter\endgroup%
+ \niib@tempa%
+}%
+\newcommand*\niib@write{%
+ \@bsphack%
+ \begingroup%
+ \niib@verbtext[\niib@@write\ignorespaces]\niib@tempa%
+}%
+\newcommand*\niib@@write[1]{%
+ \immediate\write\niib@out{%
+ @\niibrecord\string{\niib@tempb,^^J%
+ presort = \string{\niib@presort\string},^^J%
+ \niib@keyname\space= \string{\niib@key\niib@tempb\string},^^J%
+ \niibfield\space= \string{\niib@tempa\string}^^J%
+ \string}^^J}%
+ \endgroup%
+ \@esphack%
+}%
+\long\def\niib@@text#1{%
+ \ifx\niib@out\@undefined%
+ \newwrite\niib@out%
+ \gdef\niib@stream{\niibprefix\jobname.bib}%
+ \immediate\openout\niib@out\niib@stream\relax%
+ \immediate\write\niib@out{\niib@msg}%
+ \fi%
+ \if@filesw%
+ \edef\niib@tempb{#1}%
+ \expandafter\niib@write%
+ \fi%
+}
+\@ifpackageloaded{biblatex}{%
+ \expandafter\bib@gadd\expandafter\blx@bibfiles\expandafter%
+ {\niibprefix\jobname}%
+ }{%
+ \let\niib@bib\bibliography%
+ \renewcommand{\bibliography}[1]{%
+ \ifnum\the\value{bibnote} > \z@%
+ \niib@bib{\niibprefix\jobname,#1}%
+ \else%
+ \niib@bib{#1}%
+ \fi}}%
+%%
+\AtEndDocument{%
+ \flushcitestack%
+ \ifx\niib@out\@undefined\else%
+ \immediate\closeout\niib@out%
+ \fi%
+}
+\endinput
+%%
+%% End of file `notes2bib.sty'.