diff options
Diffstat (limited to 'Master/texmf-dist')
-rw-r--r-- | Master/texmf-dist/doc/support/latexmk/README | 2 | ||||
-rw-r--r-- | Master/texmf-dist/doc/support/latexmk/latexmk.1 | 12 | ||||
-rw-r--r-- | Master/texmf-dist/doc/support/latexmk/latexmk.pdf | bin | 148057 -> 148208 bytes | |||
-rw-r--r-- | Master/texmf-dist/doc/support/latexmk/latexmk.txt | 1537 | ||||
-rwxr-xr-x | Master/texmf-dist/scripts/latexmk/latexmk.pl | 169 |
5 files changed, 915 insertions, 805 deletions
diff --git a/Master/texmf-dist/doc/support/latexmk/README b/Master/texmf-dist/doc/support/latexmk/README index 5a77ae7382c..28ed36dd7b5 100644 --- a/Master/texmf-dist/doc/support/latexmk/README +++ b/Master/texmf-dist/doc/support/latexmk/README @@ -88,7 +88,7 @@ I hope you find this useful. John Collins ---------------------------- "latexmk -h" ---------------------------- -Latexmk 4.01a: Automatic LaTeX document generation routine +Latexmk 4.02: Automatic LaTeX document generation routine Usage: latexmk [latexmk_options] [filename ...] diff --git a/Master/texmf-dist/doc/support/latexmk/latexmk.1 b/Master/texmf-dist/doc/support/latexmk/latexmk.1 index aee2530b2c1..a61358cc3b0 100644 --- a/Master/texmf-dist/doc/support/latexmk/latexmk.1 +++ b/Master/texmf-dist/doc/support/latexmk/latexmk.1 @@ -1,4 +1,4 @@ -.TH LATEXMK 1L "28 September 2008" "" +.TH LATEXMK 1L "30 September 2008" "" .SH NAME latexmk \- generate LaTeX document .SH SYNOPSIS @@ -746,6 +746,12 @@ The BibTeX processing program. .B $bibtex_silent_switch ["-terse"] \fBSwitch(es)\fR for the BibTeX processing program when silent mode is on. .TP +.B $cleanup_includes_generated [0] +If nonzero, specifies that cleanup also deletes files that are +detected in log file as being generated (see the \\openout lines in +the log file). It will also include files made from these first +generation generated files. +.TP .B $cleanup_mode [0] If nonzero, specifies cleanup mode: 1 for full cleanup, 2 for cleanup except for dvi, ps and pdf files, 3 for cleanup except for dep and aux @@ -1456,9 +1462,9 @@ e-mail addresses are not written in their standard form to avoid being harvested by worms and viruses.) .SH AUTHOR Current version, by John Collins (username collins at node phys.psu.edu). -(Version 4.01). +(Version 4.01a). -It can be obtained from CTAN: +Released version (last was 4.01) can be obtained from CTAN: <http://www.tug.org/tex-archive/support/latexmk/>, and from the author's website <http://www.phys.psu.edu/~collins/software/latexmk/>. .br diff --git a/Master/texmf-dist/doc/support/latexmk/latexmk.pdf b/Master/texmf-dist/doc/support/latexmk/latexmk.pdf Binary files differindex 1ff86560416..86ba4a955f9 100644 --- a/Master/texmf-dist/doc/support/latexmk/latexmk.pdf +++ b/Master/texmf-dist/doc/support/latexmk/latexmk.pdf diff --git a/Master/texmf-dist/doc/support/latexmk/latexmk.txt b/Master/texmf-dist/doc/support/latexmk/latexmk.txt index 7c99e946497..1b735710eee 100644 --- a/Master/texmf-dist/doc/support/latexmk/latexmk.txt +++ b/Master/texmf-dist/doc/support/latexmk/latexmk.txt @@ -1,50 +1,55 @@ -NAME + + +LATEXMK(1L) LATEXMK(1L) + + +[1mNAME[0m latexmk - generate LaTeX document -SYNOPSIS - latexmk [options] [file ...] +[1mSYNOPSIS[0m + [1mlatexmk [options] [file ...][0m -DESCRIPTION - Latexmk completely automates the process of compiling a LaTeX document. - Essentially, it is like a specialized relative of the general make +[1mDESCRIPTION[0m + [4mLatexmk[24m completely automates the process of compiling a LaTeX document. + Essentially, it is like a specialized relative of the general [4mmake[0m utility, but one which determines dependencies automatically and has some other very useful features. In its basic mode of operation - latexmk is given the name of the primary source file for a document, + [4mlatexmk[24m is given the name of the primary source file for a document, and it issues the appropriate sequence of commands to generate a .dvi, .ps, .pdf and/or hardcopy version of the document. - Latexmk can also be set to run continuously with a suitable previewer. + [4mLatexmk[24m can also be set to run continuously with a suitable previewer. In that case the LaTeX program, etc, are rerun whenever one of the source files is modified, and the previewer automatically updates the on-screen view of the compiled document. - Latexmk determines which are the source files by examining the log - file. When latexmk is run, it examines properties of the source files, + [4mLatexmk[24m determines which are the source files by examining the log + file. When [4mlatexmk[24m is run, it examines properties of the source files, and if any have been changed since the last document generation, - latexmk will run the various LaTeX processing programs as necessary. + [4mlatexmk[24m will run the various LaTeX processing programs as necessary. In particular, it will repeat the run of LaTeX (or pdflatex) often enough to resolve all cross references; depending on the macro packages used. With some macro packages and document classes, four, or even - more, runs may be needed. If necessary, latexmk will also run bibtex - and/or makeindex. In addition, latexmk can be configured to generate + more, runs may be needed. If necessary, [4mlatexmk[24m will also run bibtex + and/or makeindex. In addition, [4mlatexmk[24m can be configured to generate other necessary files. For example, from an updated figure file it can automatically generate a file in encapsulated postscript or another suitable format for reading by LaTeX. - Latexmk has two different previewing options. In the simple -pv + [4mLatexmk[24m has two different previewing options. In the simple [1m-pv[0m option, a dvi, postscript or pdf previewer is automatically run after generating the dvi, postscript or pdf version of the document. The type of file to view is selected according to configuration settings and command line options. - The second previewing option is the powerful -pvc option (mnemonic: - "preview continuously"). In this case, latexmk runs continuously, reg- + The second previewing option is the powerful [1m-pvc [22moption (mnemonic: + "preview continuously"). In this case, [4mlatexmk[24m runs continuously, reg- ularly monitoring all the source files to see if any have changed. - Every time a change is detected, latexmk runs all the programs neces- + Every time a change is detected, [4mlatexmk[24m runs all the programs neces- sary to generate a new version of the document. A good previewer (like - gv) will then automatically update its display. Thus the user can sim- - ply edit a file and, when the changes are written to disk, latexmk com- + [4mgv[24m) will then automatically update its display. Thus the user can sim- + ply edit a file and, when the changes are written to disk, [4mlatexmk[24m com- pletely automates the cycle of updating the .dvi (and possibly the .ps and .pdf) file, and refreshing the previewer's display. It's not quite WYSIWYG, but usefully close. @@ -53,15 +58,10 @@ DESCRIPTION update its display, which can be (some versions of xdvi and gsview) as simple as forcing a redraw of its display. - Latexmk has the ability to print a banner in gray diagonally across - each page when making the postscript file. It can also, if needed, - call an external program to do other postprocessing on the generated - files. - - 1 + 30 September 2008 1 @@ -70,14 +70,19 @@ DESCRIPTION LATEXMK(1L) LATEXMK(1L) - Latexmk is highly configurable, both from the command line and in con- + [4mLatexmk[24m has the ability to print a banner in gray diagonally across + each page when making the postscript file. It can also, if needed, + call an external program to do other postprocessing on the generated + files. + + [4mLatexmk[24m is highly configurable, both from the command line and in con- figuration files, so that it can accommodate a wide variety of user needs and system configurations. Default values are set according to - the operating system, so latexmk often works without special configura- + the operating system, so [4mlatexmk[24m often works without special configura- tion on MS-Windows, cygwin, Linux, OS-X, and other UNIX systems (notably Solaris). - A very annoying complication handled very reliably by Latexmk, is that + A very annoying complication handled very reliably by [4mLatexmk[24m, is that LaTeX is a multiple pass system. On each run, LaTeX reads in informa- tion generated on a previous run, for things like cross referencing and indexing. In the simplest cases, a second run of LaTeX suffices, and @@ -85,21 +90,21 @@ LATEXMK(1L) LATEXMK(1L) However, there is a wide variety of add-on macro packages to LaTeX, with a variety of behaviors. The result is to break simple-minded determinations of how many runs are needed and of which programs. In - its new version, latexmk has a highly general and efficient solution to + its new version, [4mlatexmk[24m has a highly general and efficient solution to these issues. The solution involves retaining between runs information - on the source files, and a symptom is that latexmk generates an extra + on the source files, and a symptom is that [4mlatexmk[24m generates an extra file (with extension .fdb_latexmk, by default) that contains the source file information. -LATEXMK OPTIONS AND ARGUMENTS ON COMMAND LINE +[1mLATEXMK OPTIONS AND ARGUMENTS ON COMMAND LINE[0m (All options can be introduced by single or double "-" characters, e.g., "latexmk -help" or "latexmk --help".) - file One or more files can be specified. If no files are specified, - latexmk will, by default, run on all files in the current work- + [1mfile [22mOne or more files can be specified. If no files are specified, + [4mlatexmk[24m will, by default, run on all files in the current work- ing directory with a ".tex" extension. This behavior can be - changed: see the description concerning the @default_files vari- + changed: see the description concerning the [4m@default_files[24m vari- able in the section "List of configuration variables usable in initialization files". @@ -108,26 +113,21 @@ LATEXMK OPTIONS AND ARGUMENTS ON COMMAND LINE latexmk foo - then latexmk will operate on the file "foo.tex". + then [4mlatexmk[24m will operate on the file "foo.tex". - -bm <message> + [1m-bm <message>[0m A banner message to print diagonally across each page when con- verting the dvi file to postscript. The message must be a sin- gle argument on the command line so be careful with quoting spaces and such. - Note that if the -bm option is specified, the -ps option is + Note that if the [1m-bm [22moption is specified, the [1m-ps [22moption is assumed. - -bi <intensity> - How dark to print the banner message. A decimal number between - 0 and 1. 0 is black and 1 is white. The default is 0.95, which - is OK unless your toner cartridge is getting low. - - 28 September 2008 2 + 30 September 2008 2 @@ -136,7 +136,12 @@ LATEXMK OPTIONS AND ARGUMENTS ON COMMAND LINE LATEXMK(1L) LATEXMK(1L) - -bs <scale> + [1m-bi <intensity>[0m + How dark to print the banner message. A decimal number between + 0 and 1. 0 is black and 1 is white. The default is 0.95, which + is OK unless your toner cartridge is getting low. + + [1m-bs <scale>[0m A decimal number that specifies how large the banner message will be printed. Experimentation is necessary to get the right scale for your message, as a rule of thumb the scale should be @@ -144,57 +149,51 @@ LATEXMK(1L) LATEXMK(1L) message. The default is 220.0 which is just right for 5 charac- ter messages. - -commands - List the commands used by latexmk for processing files, and then + [1m-commands[0m + List the commands used by [4mlatexmk[24m for processing files, and then exit. - -c Clean up (remove) all regeneratable files generated by latex and - bibtex except dvi, postscript and pdf. These files are a combi- + [1m-c [22mClean up (remove) all regeneratable files generated by [4mlatex[24m and + [4mbibtex[24m except dvi, postscript and pdf. These files are a combi- nation of log files, aux files, and those with extensions speci- - fied in the @generated_exts configuration variable. In addi- - tion, files with extensions by the $clean_ext configuration + fied in the [4m@generated_exts[24m configuration variable. In addi- + tion, files with extensions by the [4m$clean_ext[24m configuration variable are removed. But the file containing a database of source file information is not removed. - This cleanup is instead of a regular make. See the -gg option + This cleanup is instead of a regular make. See the [1m-gg [22moption if you want to do a cleanup then a make. - -C Clean up (remove) all regeneratable files generated by latex and - bibtex. This is the same as the -c option with the addition of + [1m-C [22mClean up (remove) all regeneratable files generated by [4mlatex[24m and + [4mbibtex[24m. This is the same as the [1m-c [22moption with the addition of dvi, postscript and pdf files, and those with extensions in the - $clean_full_ext configuration variable. + [4m$clean_full_ext[24m configuration variable. - This cleanup is instead of a regular make. See the -gg option + This cleanup is instead of a regular make. See the [1m-gg [22moption if you want to do a cleanup than a make. - -CA Clean up (remove) absolutely all regeneratable files. This is - the action specified by -C with the addition of deleting the + [1m-CA [22mClean up (remove) absolutely all regeneratable files. This is + the action specified by [1m-C [22mwith the addition of deleting the file containing the database of source file information. - This cleanup is instead of a regular make. It is the same as -C - -CF. See the -gg option if you want to do a cleanup then a + This cleanup is instead of a regular make. It is the same as [1m-C[0m + [1m-CF[22m. See the [1m-gg [22moption if you want to do a cleanup then a make. - -CF Remove the file containing the database of source file informa- + [1m-CF [22mRemove the file containing the database of source file informa- tion, before doing the other actions requested. - -d Set draft mode. This prints the banner message "DRAFT" across + [1m-d [22mSet draft mode. This prints the banner message "DRAFT" across your page when converting the dvi file to postscript. Size and - intensity can be modified with the -bs and -bi options. The -bm + intensity can be modified with the [1m-bs [22mand [1m-bi [22moptions. The [1m-bm[0m option will override this option as this is really just a short way of specifying: latexmk -bm DRAFT - Note that if the -d option is specified, the -ps option is - assumed. - - -dF Dvi file filtering. The argument to this option is a filter - which will generate a filtered dvi file with the extension - - 28 September 2008 3 + 30 September 2008 3 @@ -203,6 +202,11 @@ LATEXMK(1L) LATEXMK(1L) LATEXMK(1L) LATEXMK(1L) + Note that if the [1m-d [22moption is specified, the [1m-ps [22moption is + assumed. + + [1m-dF [22mDvi file filtering. The argument to this option is a filter + which will generate a filtered dvi file with the extension ".dviF". All extra processing (e.g. conversion to postscript, preview, printing) will then be performed on this filtered dvi file. @@ -212,31 +216,31 @@ LATEXMK(1L) LATEXMK(1L) latexmk -dF 'dviselect even' foo.tex - -diagnostics + [1m-diagnostics[0m Print detailed diagnostics during a run. This may help for - debugging problems or to understand .latexmk's behavior in dif- + debugging problems or to understand [4m.latexmk[24m's behavior in dif- ficult situations. - -dvi Generate dvi version of document. + [1m-dvi [22mGenerate dvi version of document. - -dvi- Turn off generation of dvi version of document. (This may get + [1m-dvi- [22mTurn off generation of dvi version of document. (This may get overridden, if some other file is made (e.g., a .ps file) that is generated from the dvi file, or if no generated file at all is requested.) - -e <code> + [1m-e <code>[0m Execute the specified initialization code before processing. - The code is Perl code of the same form as is used in latexmk's + The code is [4mPerl[24m code of the same form as is used in [4mlatexmk[24m's initialization files -- for more details, see the information on - the -r option, and the section about "Configuration/initializa- + the [1m-r [22moption, and the section about "Configuration/initializa- tion (RC) files". The code is typically a sequence of assign- ment statements separated by semicolons. - The code is executed when the -e option is encountered during - latexmk's parsing of its command line. See the -r option for a + The code is executed when the [1m-e [22moption is encountered during + [4mlatexmk[24m's parsing of its command line. See the [1m-r [22moption for a way of executing initialization code from a file. An error - results in latexmk stopping. Multiple instances of the -r and - -e options can be used, and they are executed in the order they + results in [4mlatexmk[24m stopping. Multiple instances of the [1m-r [22mand + [1m-e [22moptions can be used, and they are executed in the order they appear on the command line. Some care is needed to deal with proper quoting of special char- @@ -246,22 +250,17 @@ LATEXMK(1L) LATEXMK(1L) latexmk -e '$latex=q/latex %O -shell-escape %S/' file.tex - (Note that the q/.../ construct is a Perl idiom equivalent to + (Note that the q/.../ construct is a [4mPerl[24m idiom equivalent to using single quotes. This is easier than arranging to get a quote character correctly escaped in a way that is independent of the shell and the operating-system.) - -f Force latexmk to continue document processing despite errors. - Normally, when latexmk detects that LaTeX or another program has - found an error which will not be resolved by further processing, - no further processing is carried out. - - -f- Turn off the forced processing-past-errors such as is set by the - -f option. This could be used to override a setting in a + [1m-f [22mForce [4mlatexmk[24m to continue document processing despite errors. + Normally, when [4mlatexmk[24m detects that LaTeX or another program has - 28 September 2008 4 + 30 September 2008 4 @@ -270,32 +269,37 @@ LATEXMK(1L) LATEXMK(1L) LATEXMK(1L) LATEXMK(1L) - configuration file. + found an error which will not be resolved by further processing, + no further processing is carried out. - -g Force latexmk to process document fully, even under situations - where latexmk would normally decide that no changes in the + [1m-f- [22mTurn off the forced processing-past-errors such as is set by the + [1m-f [22moption. This could be used to override a setting in a con- + figuration file. + + [1m-g [22mForce [4mlatexmk[24m to process document fully, even under situations + where [4mlatexmk[24m would normally decide that no changes in the source files have occurred since the previous run. This option is useful, for example, if you change some options and wish to reprocess the files. - -g- Turn off -g. + [1m-g- [22mTurn off [1m-g[22m. - -gg "Super go mode" or "clean make": clean out generated files as if - -CA had been given, and then do a regular make. + [1m-gg [22m"Super go mode" or "clean make": clean out generated files as if + [1m-CA [22mhad been given, and then do a regular make. - -h, -help + [1m-h, -help[0m Print help information. - -l Run in landscape mode, using the landscape mode for the preview- + [1m-l [22mRun in landscape mode, using the landscape mode for the preview- ers and the dvi to postscript converters. This option is not normally needed nowadays, since current previewers normally determine this information automatically. - -l- Turn off -l. + [1m-l- [22mTurn off [1m-l[22m. - -new-viewer + [1m-new-viewer[0m When in continuous-preview mode, always start a new viewer to - view the generated file. By default, latexmk will, in continu- + view the generated file. By default, [4mlatexmk[24m will, in continu- ous-preview mode, test for a previously running previewer for the same file and not start a new one if a previous previewer is running. However, its test sometimes fails (notably if there is @@ -303,15 +307,15 @@ LATEXMK(1L) LATEXMK(1L) name as the current file, but in a different directory). This option turns off the default behavior. - -new-viewer- - The inverse of the -new-viewer option. It puts latexmk in its + [1m-new-viewer-[0m + The inverse of the [1m-new-viewer [22moption. It puts [4mlatexmk[24m in its normal behavior that in preview-continuous mode it checks for an already-running previewer. - -p Print out the document. By default it is the generated - postscript file that is printed. But you can use the -print=... + [1m-p [22mPrint out the document. By default it is the generated + postscript file that is printed. But you can use the [1m-print=...[0m option to print the dvi or pdf files instead, and you can con- - figure this in a start up file (by setting the $print_type vari- + figure this in a start up file (by setting the [4m$print_type[24m vari- able). However, printing is enabled by default only under UNIX/LINUX @@ -319,16 +323,11 @@ LATEXMK(1L) LATEXMK(1L) eral, the correct behavior for printing very much depends on your system's software. In particular, under MS-Windows you must have suitable program(s) available, and you must have con- - figured the print commands used by latexmk. This can be non- - trivial. See the documentation on the $lpr, $lpr_dvi, and - $lpr_pdf configuration variables to see how to set the commands - for printing. + figured the print commands used by [4mlatexmk[24m. This can be non- - This option is incompatible with the -pv and -pvc options, so it - - 28 September 2008 5 + 30 September 2008 5 @@ -337,35 +336,40 @@ LATEXMK(1L) LATEXMK(1L) LATEXMK(1L) LATEXMK(1L) + trivial. See the documentation on the [4m$lpr[24m, [4m$lpr_dvi[24m, and + [4m$lpr_pdf[24m configuration variables to see how to set the commands + for printing. + + This option is incompatible with the [1m-pv [22mand [1m-pvc [22moptions, so it turns them off. - -pdf Generate pdf version of document using pdflatex. + [1m-pdf [22mGenerate pdf version of document using pdflatex. - -pdfdvi + [1m-pdfdvi[0m Generate pdf version of document from the dvi file, by default using dvipdf. - -pdfps Generate pdf version of document from the ps file, by default + [1m-pdfps [22mGenerate pdf version of document from the ps file, by default using ps2pdf. - -pdf- Turn off generation of pdf version of document. (This can be + [1m-pdf- [22mTurn off generation of pdf version of document. (This can be used to override a setting in a configuration file. It may get overridden if some other option requires the generation of a pdf file.) - -print=dvi, -print=ps, -print=pdf + [1m-print=dvi, -print=ps, -print=pdf[0m Define which kind of file is printed. This option also ensures that the requisite file is made, and turns on printing. The default is to print a postscript file. - -ps Generate postscript version of document. + [1m-ps [22mGenerate postscript version of document. - -ps- Turn off generation of postscript version of document. This can + [1m-ps- [22mTurn off generation of postscript version of document. This can be used to override a setting in a configuration file. (It may get overridden by some other option that requires a postscript file, for example a request for printing.) - -pF Postscript file filtering. The argument to this option is a + [1m-pF [22mPostscript file filtering. The argument to this option is a filter which will generate a filtered postscript file with the extension ".psF". All extra processing (e.g. preview, printing) will then be performed on this filtered postscript file. @@ -382,40 +386,40 @@ LATEXMK(1L) LATEXMK(1L) depend on your command interpreter, as used by the particular version of perl and the operating system on your computer. - -pv Run file previewer. If the -view option is used, this will + [1m-pv [22mRun file previewer. If the [1m-view [22moption is used, this will select the kind of file to be previewed (dvi, ps or pdf). Oth- erwise the viewer views the "highest" kind of file selected, by - the -dvi, -ps, -pdf, -pdfps options, in the order dvi, ps, pdf - (low to high). If no file type has been selected, the dvi pre- - viewer will be used. This option is incompatible with the -p - and -pvc options, so it turns them off. + the [1m-dvi[22m, [1m-ps[22m, [1m-pdf[22m, [1m-pdfps [22moptions, in the order dvi, ps, pdf + (low to high). If no file type has been selected, the dvi - -pv- Turn off -pv. + 30 September 2008 6 - 28 September 2008 6 +LATEXMK(1L) LATEXMK(1L) -LATEXMK(1L) LATEXMK(1L) + previewer will be used. This option is incompatible with the [1m-p[0m + and [1m-pvc [22moptions, so it turns them off. + [1m-pv- [22mTurn off [1m-pv[22m. - -pvc Run a file previewer and continually update the .dvi, .ps, + [1m-pvc [22mRun a file previewer and continually update the .dvi, .ps, and/or .pdf files whenever changes are made to source files (see the Description above). Which of these files is generated and which is viewed is governed by the other options, and is the - same as for the -pv option. The preview-continuous option -pvc + same as for the [1m-pv [22moption. The preview-continuous option [1m-pvc[0m can only work with one file. So in this case you will normally only specify one filename on the command line. It is also - incompatible with the -p and -pv options, so it turns these + incompatible with the [1m-p [22mand [1m-pv [22moptions, so it turns these options off With a good previewer the display will be automatically updated. - (Under some but not all versions of UNIX/Linux "gv -watch" does + (Under [4msome[24m [4mbut[24m [4mnot[24m [4mall[24m versions of UNIX/Linux "gv -watch" does this for postscript files; this can be set by a configuration variable. This would also work for pdf files except for an apparent bug in gv that causes an error when the newly updated @@ -426,25 +430,25 @@ LATEXMK(1L) LATEXMK(1L) file, and prevents new versions being written, so it is a bad idea to use acroread to view pdf files in preview-continuous mode. It is better to use a dvi or ps viewer, as set by one of - the -view=dvi and -view=ps options. + the [1m-view=dvi [22mand [1m-view=ps [22moptions. There are some other methods for arranging an update, notably useful for many versions of xdvi and xpdf. These are best set - in latexmk's configuration; see below. + in [4mlatexmk[24m's configuration; see below. - Note that if latexmk dies or is stopped by the user, the + Note that if [4mlatexmk[24m dies or is stopped by the user, the "forked" previewer will continue to run. Successive invocations - with the -pvc option will not fork new previewers, but latexmk + with the [1m-pvc [22moption will not fork new previewers, but [4mlatexmk[0m will normally use the existing previewer. (At least this will - happen when latexmk is running under an operating system where + happen when [4mlatexmk[24m is running under an operating system where it knows how to determine whether an existing previewer is run- ning.) - -pvc- Turn off -pvc. + [1m-pvc- [22mTurn off [1m-pvc[22m. - -quiet Same as -silent + [1m-quiet [22mSame as -silent - -r <rcfile> + [1m-r <rcfile>[0m Read the specified initialization file ("RC file") before pro- cessing. @@ -452,17 +456,12 @@ LATEXMK(1L) LATEXMK(1L) -- see the section below on "Configuration/initialization (RC) files" -- are read first. (2) Then the options on the command line are acted on in the order they are given. Therefore if an - initialization file is specified by the -r option, it is read + initialization file is specified by the [1m-r [22moption, it is read during this second step. Thus an initialization file specified - with the -r option can override both the standard initialization - files and previously specified options. But all of these can be - overridden by later options. - - The contents of the RC file just comprise a piece of code in the - 28 September 2008 7 + 30 September 2008 7 @@ -471,79 +470,86 @@ LATEXMK(1L) LATEXMK(1L) LATEXMK(1L) LATEXMK(1L) - Perl programming language (typically a sequence of assignment - statements); they are executed when the -r option is encountered - during latexmk's parsing of its command line. See the -e option - for a way of giving initialization code directly on latexmk's - command line. An error results in latexmk stopping. Multiple - instances of the -r and -e options can be used, and they are + with the [1m-r [22moption can override both the standard initialization + files and [4mpreviously[24m specified options. But all of these can be + overridden by [4mlater[24m options. + + The contents of the RC file just comprise a piece of code in the + [4mPerl[24m programming language (typically a sequence of assignment + statements); they are executed when the [1m-r [22moption is encountered + during [4mlatexmk[24m's parsing of its command line. See the [1m-e [22moption + for a way of giving initialization code directly on [4mlatexmk[24m's + command line. An error results in [4mlatexmk[24m stopping. Multiple + instances of the [1m-r [22mand [1m-e [22moptions can be used, and they are executed in the order they appear on the command line. - -silent + [1m-silent[0m Run commands silently, i.e., with options that reduce the amount of diagnostics generated. For example, with the default set- tings for commands under UNIX, the command "latex -interac- tion=batchmode" is used for latex. - Also reduce the number of informational messages that latexmk + Also reduce the number of informational messages that [4mlatexmk[0m generates. - -v, -version - Print version number of latexmk. + [1m-v, -version[0m + Print version number of [4mlatexmk[24m. - -verbose - Opposite of -silent. This is the default setting. + [1m-verbose[0m + Opposite of [1m-silent[22m. This is the default setting. - -view=default, -view=dvi, -view=ps, -view=pdf + [1m-view=default, -view=dvi, -view=ps, -view=pdf[0m Set the kind of file used when previewing is requested (e.g., by - the -pv or -pvc switches). The default is to view the "highest" + the [1m-pv [22mor [1m-pvc [22mswitches). The default is to view the "highest" kind of requested file (in the order dvi, ps, pdf). - The preview-continuous option -pvc can only work with one file. So in + The preview-continuous option [1m-pvc [22mcan only work with one file. So in this case you will normally only specify one filename on the command line. - Options -p, -pv and -pvc are mutually exclusive. So each of these + Options [1m-p[22m, [1m-pv [22mand [1m-pvc [22mare mutually exclusive. So each of these options turns the others off. -EXAMPLES - % latexmk thesis # run latex enough times to resolve - cross-references +[1mEXAMPLES[0m + % [1mlatexmk thesis [4m[22m#[24m [4mrun[24m [4mlatex[24m [4menough[24m [4mtimes[24m [4mto[24m [4mresolve[0m + [4mcross-references[0m - % latexmk -pvc -ps thesis# run latex enough times to resolve - cross-references, make a postscript - file, start a previewer. Then - watch for changes in the source - file thesis.tex and any files it - uses. After any changes rerun latex - the appropriate number of times and - remake the postscript file. If latex - encounters an error, latexmk will - keep running, watching for - source file changes. + % [1mlatexmk -pvc -ps thesis[4m[22m#[24m [4mrun[24m [4mlatex[24m [4menough[24m [4mtimes[24m [4mto[24m [4mresolve[0m + [4mcross-references,[24m [4mmake[24m [4ma[24m [4mpostscript[0m + [4mfile,[24m [4mstart[24m [4ma[24m [4mpreviewer.[24m [4mThen[0m + [4mwatch[24m [4mfor[24m [4mchanges[24m [4min[24m [4mthe[24m [4msource[0m + [4mfile[24m [4mthesis.tex[24m [4mand[24m [4many[24m [4mfiles[24m [4mit[0m + [4muses.[24m [4mAfter[24m [4many[24m [4mchanges[24m [4mrerun[24m [4mlatex[0m + [4mthe[24m [4mappropriate[24m [4mnumber[24m [4mof[24m [4mtimes[24m [4mand[0m + [4mremake[24m [4mthe[24m [4mpostscript[24m [4mfile.[24m [4mIf[24m [4mlatex[0m + [4mencounters[24m [4man[24m [4merror,[24m [4mlatexmk[24m [4mwill[0m + [4mkeep[24m [4mrunning,[24m [4mwatching[24m [4mfor[0m - % latexmk -c # remove .aux, .log, .bbl, .blg, .dvi, - .pdf, .ps & .bbl files + 30 September 2008 8 - 28 September 2008 8 +LATEXMK(1L) LATEXMK(1L) -LATEXMK(1L) LATEXMK(1L) + [4msource[24m [4mfile[24m [4mchanges.[0m + [4m%[24m [1mlatexmk -c [4m[22m#[24m [4mremove[24m [4m.aux,[24m [4m.log,[24m [4m.bbl,[24m [4m.blg,[24m [4m.dvi,[0m + [4m.pdf,[24m [4m.ps[24m [4m&[24m [4m.bbl[24m [4mfiles[0m -CONFIGURATION/INITIALIZATION (RC) FILES - Latexmk can be customized using initialization files, which are read at + + +[1mCONFIGURATION/INITIALIZATION (RC) FILES[0m + [4mLatexmk[24m can be customized using initialization files, which are read at startup in the following order: 1) The system RC file, if it exists. - On a UNIX system, latexmk searches for following places for its sys- + On a UNIX system, [4mlatexmk[24m searches for following places for its sys- tem RC file, in the following order, and reads the first it finds: "/opt/local/share/latexmk/LatexMk", "/usr/local/share/latexmk/LatexMk", @@ -559,23 +565,23 @@ CONFIGURATION/INITIALIZATION (RC) FILES named either "latexmkrc" or ".latexmkrc", and the first of these to be found is used, if any. - 4) Any RC file(s) specified on the command line with the -r option. + 4) Any RC file(s) specified on the command line with the [1m-r [22moption. - Each RC file is a sequence of Perl commands. Naturally, a user can use + Each RC file is a sequence of [4mPerl[24m commands. Naturally, a user can use this in creative ways. But for most purposes, one simply uses a sequence of assignment statements that override some of the built-in - settings of Latexmk. Straightforward cases can be handled without - knowledge of the Perl language by using the examples in this document + settings of [4mLatexmk[24m. Straightforward cases can be handled without + knowledge of the [4mPerl[24m language by using the examples in this document as templates. Comment lines are introduced by the "#" character. Note that command line options are obeyed in the order in which they - are written; thus any RC file specified on the command line with the -r + are written; thus any RC file specified on the command line with the [1m-r[0m option can override previous options but can be itself overridden by - later options on the command line. There is also the -e option, which - allows initialization code to be specified in latexmk's command line. + later options on the command line. There is also the [1m-e [22moption, which + allows initialization code to be specified in [4mlatexmk[24m's command line. -HOW TO SET VARIABLES IN INITIALIZATION FILES +[1mHOW TO SET VARIABLES IN INITIALIZATION FILES[0m The important variables that can be configured are described in the section "List of configuration variables usable in initialization files". Syntax for setting these variables is of the following forms: @@ -586,24 +592,24 @@ HOW TO SET VARIABLES IN INITIALIZATION FILES $preview_mode = 1; - for the setting of a numeric variable, and - @default_files = ('paper', 'paper1'); - for the setting of an array of strings. It is possible to append an - item to an array variable as follows: + 30 September 2008 9 - 28 September 2008 9 +LATEXMK(1L) LATEXMK(1L) + for the setting of a numeric variable, and -LATEXMK(1L) LATEXMK(1L) + @default_files = ('paper', 'paper1'); + for the setting of an array of strings. It is possible to append an + item to an array variable as follows: push @default_files, 'paper2'; @@ -612,18 +618,18 @@ LATEXMK(1L) LATEXMK(1L) Each statement ends with a semicolon. You can do much more complicated things, but for this you will need to - consult a manual for the Perl programming language. + consult a manual for the [4mPerl[24m programming language. -FORMAT OF COMMAND SPECIFICATIONS - Some of the variables set the commands that latexmk uses for carrying +[1mFORMAT OF COMMAND SPECIFICATIONS[0m + Some of the variables set the commands that [4mlatexmk[24m uses for carrying out its work, for example to generate a dvi file from a tex file or to view a postscript file. This section describes some important features of how the commands are specified. - Placeholders: Supposed you wanted latexmk to use the command elatex in + [1mPlaceholders[22m: Supposed you wanted [4mlatexmk[24m to use the command elatex in place of the regular latex command, and suppose moreover that you wanted to give it the option "--shell-escape". You could do this by the following setting: @@ -633,37 +639,30 @@ FORMAT OF COMMAND SPECIFICATIONS The two items starting with the % character are placeholders. These are substituted by appropriate values before the command is run. Thus %S will be replaced by the source file that elatex will be applied to, - and %O will be replaced by any options that latexmk has decided to use + and %O will be replaced by any options that [4mlatexmk[24m has decided to use for this command. (E.g., if you used the -silent option it would replace %O by "-interaction=batchmode".) The available placeholders are: - %B base of filename for current command. E.g., if a postscript + [1m%B [22mbase of filename for current command. E.g., if a postscript file document.ps is being made from the dvi file document.dvi, then the basename is document. - %D destination file (e.g., the name of the postscript file when + [1m%D [22mdestination file (e.g., the name of the postscript file when converting a dvi file to postscript). - %O options + [1m%O [22moptions - %R root filename. This is the base name for the main tex file. + [1m%R [22mroot filename. This is the base name for the main tex file. - %S source file (e.g., the name of the dvi file when converting a + [1m%S [22msource file (e.g., the name of the dvi file when converting a dvi file to ps). - %T The name of the primary tex file. - - The distinction between %B and %R needs a bit of care, since they are - often the same, but not always. For example on a simple document, the - basename of a bibtex run is the same as for the texfile. But in a doc- - ument with several bibliographies, the bibliography files will have a - variety of names. Since bibtex is invoked with the basename of the - 28 September 2008 10 + 30 September 2008 10 @@ -672,6 +671,13 @@ FORMAT OF COMMAND SPECIFICATIONS LATEXMK(1L) LATEXMK(1L) + [1m%T [22mThe name of the primary tex file. + + The distinction between %B and %R needs a bit of care, since they are + often the same, but not always. For example on a simple document, the + basename of a bibtex run is the same as for the texfile. But in a doc- + ument with several bibliographies, the bibliography files will have a + variety of names. Since bibtex is invoked with the basename of the bibliography file, the setting for the bibtex command should therefore be @@ -685,14 +691,14 @@ LATEXMK(1L) LATEXMK(1L) ate usage. If you omit to supply any placeholders whatever in the specification of - a command, latexmk will supply what its author thinks are appropriate + a command, [4mlatexmk[24m will supply what its author thinks are appropriate defaults. This gives compatibility with configuration files for previ- - ous versions of latexmk, which didn't use placeholders. + ous versions of [4mlatexmk[24m, which didn't use placeholders. - "Detaching" a command: Normally when latexmk runs a command, it waits + [1m"Detaching" a command[22m: Normally when [4mlatexmk[24m runs a command, it waits for the command to run to completion. This is appropriate for commands like latex, of course. But for previewers, the command should normally - run detached, so that latexmk gets the previewer running and then + run detached, so that [4mlatexmk[24m gets the previewer running and then returns to its next task (or exits if there is nothing else to do). To achieve this effect of detaching a command, you need to precede the command name with "start ", as in @@ -702,7 +708,7 @@ LATEXMK(1L) LATEXMK(1L) This will be translated to whatever is appropriate for your operating system. - Notes: (1) In some circumstances, latex will always run a command + Notes: (1) In some circumstances, [4mlatex[24m will always run a command detached. This is the case for a previewer in preview continuous mode, since otherwise previewing continuously makes no sense. (2) This pre- cludes the possibility of running a command named start. (3) If the @@ -712,7 +718,7 @@ LATEXMK(1L) LATEXMK(1L) UNIX and MS-Windows. See the source code for how I've handled the problem. - Command names containing spaces: Under MS-Windows it is common that the + [1mCommand names containing spaces[22m: Under MS-Windows it is common that the name of a command includes spaces, since software is often installed in a subdirectory of "C:Program Files". Such command names should be enclosed in double quotes, as in @@ -720,28 +726,28 @@ LATEXMK(1L) LATEXMK(1L) $lpr_pdf = '"c:/Program Files/Ghostgum/gsview/gsview32.exe" /p %S'; - Using MS-Windows file associations: A useful trick under modern ver- - sions of MS-Windows (e.g., WinXP) is to use just the command - $dvi_previewer = 'start %S'; - Under recent versions of MS-Windows, this will cause to be run whatever - program the system has associated with dvi files. (The same applies + 30 September 2008 11 - 28 September 2008 11 +LATEXMK(1L) LATEXMK(1L) -LATEXMK(1L) LATEXMK(1L) + [1mUsing MS-Windows file associations[22m: A useful trick under modern ver- + sions of MS-Windows (e.g., WinXP) is to use just the command + $dvi_previewer = 'start %S'; + Under recent versions of MS-Windows, this will cause to be run whatever + program the system has associated with dvi files. (The same applies for a postscript viewer and a pdf viewer.) - Not using a certain command: If a command is not to be run, the command + [1mNot using a certain command[22m: If a command is not to be run, the command name NONE is used, as in $lpr = 'NONE lpr'; @@ -749,22 +755,22 @@ LATEXMK(1L) LATEXMK(1L) This typically is used when an appropriate command does not exist on your system. The string after the "NONE" is effectively a comment. - Options to commands: Setting the name of a command can be used not only + [1mOptions to commands[22m: Setting the name of a command can be used not only for changing the name of the command called, but also to add options to - command. Suppose you want latexmk to use latex with source specials + command. Suppose you want [4mlatexmk[24m to use latex with source specials enabled. Then you might use the following line in an initialization file: $latex = 'latex --src-specials %O %S'; - Advanced tricks: Normally one specifies a single command for the com- - mands invoked by latexmk. Naturally, if there is some complicated + [1mAdvanced tricks[22m: Normally one specifies a single command for the com- + mands invoked by [4mlatexmk[24m. Naturally, if there is some complicated additional processing you need to do in your special situation, you can write a script (or batch file) to do the processing, and then configure - latexmk to use your script in place of the standard program. + [4mlatexmk[24m to use your script in place of the standard program. - It is also possible to configure latexmk to run multiple commands. For + It is also possible to configure [4mlatexmk[24m to run multiple commands. For example, if when running pdflatex to generate a pdf file from a tex file you need to run another program after pdflatex to perform some extra processing, you could do something like: @@ -778,26 +784,19 @@ LATEXMK(1L) LATEXMK(1L) -LIST OF CONFIGURATION VARIABLES USABLE IN INITIALIZATION FILES +[1mLIST OF CONFIGURATION VARIABLES USABLE IN INITIALIZATION FILES[0m Default values are indicated in brackets. - $banner [0] + [1m$banner [0][0m If nonzero, the banner message is printed across each page when converting the dvi file to postscript. Without modifying the - variable $banner_message, this is equivalent to specifying the - -d option. + variable [4m$banner_message[24m, this is equivalent to specifying the + [1m-d [22moption. - Note that if $banner is nonzero, the $postscript_mode is assumed - and the postscript file is always generated, even if it is newer - than the dvi file. - $banner_intensity [0.95] - Equivalent to the -bi option, this is a decimal number between 0 - and 1 that specifies how dark to print the banner message. 0 is - - 28 September 2008 12 + 30 September 2008 12 @@ -806,24 +805,31 @@ LIST OF CONFIGURATION VARIABLES USABLE IN INITIALIZATION FILES LATEXMK(1L) LATEXMK(1L) + Note that if [1m$banner [22mis nonzero, the [1m$postscript_mode [22mis assumed + and the postscript file is always generated, even if it is newer + than the dvi file. + + [1m$banner_intensity [0.95][0m + Equivalent to the [1m-bi [22moption, this is a decimal number between 0 + and 1 that specifies how dark to print the banner message. 0 is black, 1 is white. The default is just right if your toner car- tridge isn't running too low. - $banner_message ["DRAFT"] + [1m$banner_message ["DRAFT"][0m The banner message to print across each page when converting the - dvi file to postscript. This is equivalent to the -bm option. + dvi file to postscript. This is equivalent to the [1m-bm [22moption. - $banner_scale [220.0] + [1m$banner_scale [220.0][0m A decimal number that specifies how large the banner message will be printed. Experimentation is necessary to get the right scale for your message, as a rule of thumb the scale should be about equal to 1100 divided by the number of characters in the message. The Default is just right for 5 character messages. - This is equivalent to the -bs option. + This is equivalent to the [1m-bs [22moption. - @BIBINPUTS + [1m@BIBINPUTS[0m This is an array variable, now mostly obsolete, that specifies - directories where latexmk should look for .bib files. By + directories where [4mlatexmk[24m should look for .bib files. By default it is set from the BIBINPUTS environment variable of the operating system. If that environment variable is not set, a single element list consisting of the current directory is set. @@ -840,31 +846,24 @@ LATEXMK(1L) LATEXMK(1L) backward slash "\" can be used to separate pathname components, so the first two and the second two examples are equivalent. Each backward slash should be doubled to avoid running afoul of - Perl's rules for writing strings. + [4mPerl[24m's rules for writing strings. - Important note: This variable is now mostly obsolete in the current - version of latexmk, since it has a better method of searching for files + [4mImportant[24m [4mnote:[24m This variable is now mostly obsolete in the current + version of [4mlatexmk[24m, since it has a better method of searching for files using the kpsewhich command. However, if your system is an unusual one - without the kpsewhich command, you may need to set the variable @BIBIN- - PUTS. + without the kpsewhich command, you may need to set the variable [4m@BIBIN-[0m + [4mPUTS[24m. - $bibtex ["bibtex %O %S"] + [1m$bibtex ["bibtex %O %S"][0m The BibTeX processing program. - $bibtex_silent_switch ["-terse"] - Switch(es) for the BibTeX processing program when silent mode is + [1m$bibtex_silent_switch ["-terse"][0m + [1mSwitch(es) [22mfor the BibTeX processing program when silent mode is on. - $cleanup_mode [0] - If nonzero, specifies cleanup mode: 1 for full cleanup, 2 for - cleanup except for dvi, ps and pdf files, 3 for cleanup except - for dep and aux files. (There is also extra cleaning as speci- - fied by the $clean_ext, $clean_full_ext and @generated_exts - variables.) - - 28 September 2008 13 + 30 September 2008 13 @@ -873,37 +872,50 @@ LATEXMK(1L) LATEXMK(1L) LATEXMK(1L) LATEXMK(1L) - This variable is equivalent to specifying one of the -c, -c1, or -C - options. But there should be no need to set this variable from an RC + [1m$cleanup_includes_generated [0][0m + If nonzero, specifies that cleanup also deletes files that are + detected in log file as being generated (see the \openout lines + in the log file). It will also include files made from these + first generation generated files. + + [1m$cleanup_mode [0][0m + If nonzero, specifies cleanup mode: 1 for full cleanup, 2 for + cleanup except for dvi, ps and pdf files, 3 for cleanup except + for dep and aux files. (There is also extra cleaning as speci- + fied by the [4m$clean_ext[24m, [4m$clean_full_ext[24m and [4m@generated_exts[0m + variables.) + + This variable is equivalent to specifying one of the [1m-c[22m, [1m-c1[22m, or [1m-C[0m + options. But there should be no need to set this variable from an RC file. - $clean_ext [""] - Extra extensions of files for latexmk to remove when any of the - clean-up options (-c, -c1, or -C) is selected. The value of + [1m$clean_ext [""][0m + Extra extensions of files for [4mlatexmk[24m to remove when any of the + clean-up options ([1m-c[22m, [1m-c1[22m, or [1m-C[22m) is selected. The value of this variable is a string containing the extensions separated by spaces. - $clean_full_ext [""] - Extra extensions of files for latexmk to remove when the -C + [1m$clean_full_ext [""][0m + Extra extensions of files for [4mlatexmk[24m to remove when the [1m-C[0m option is selected, i.e., extensions of files to remove when the .dvi, etc files are to be cleaned-up. - @cus_dep_list [()] - Custom dependency list -- see section on "Custom Dependencies". + [1m@cus_dep_list [()][0m + Custom dependency list -- see section on "Custom Dependencies". - @default_files [("*.tex")] + [1m@default_files [("*.tex")][0m Default list of files to be processed. - Normally, if no filenames are specified on the command line, - latexmk processes all tex files specified in the @default_files - variable, which by default is set to all tex files ("*.tex") in - the current directory. This is a convenience: just run latexmk - and it will process an appropriate set of files. But sometimes + Normally, if no filenames are specified on the command line, + [4mlatexmk[24m processes all tex files specified in the [4m@default_files[0m + variable, which by default is set to all tex files ("*.tex") in + the current directory. This is a convenience: just run [4mlatexmk[0m + and it will process an appropriate set of files. But sometimes you want only some of these files to be processed. In this case - you set the @default_files in an initialization file (e.g., the - file "latexmkrc" in the current directory). Then if no files - are specified on the command line then the files you specify by - setting @default_files are processed. + you set the [4m@default_files[24m in an initialization file (e.g., the + file "latexmkrc" in the current directory). Then if no files + are specified on the command line then the files you specify by + setting [4m@default_files[24m are processed. Three examples: @@ -913,96 +925,80 @@ LATEXMK(1L) LATEXMK(1L) @default_files = ("*.tex", "*.dtx"); - Note that more than file may be given, and that the default - extension is ".tex". Wild cards are allowed. The parentheses - are because @default_files is an array variable, i.e., a - sequence of filename specifications is possible. + Note that more than file may be given, and that the default + extension is ".tex". Wild cards are allowed. The parentheses - $dvi_filter [empty] - The dvi file filter to be run on the newly produced dvi file - before other processing. Equivalent to specifying the -dF - option. - $dvi_mode [0] - If nonzero, generate a dvi version of the document. Equivalent - to the -dvi option. - $dvi_previewer ["start xdvi %O %S" under UNIX] - The command to invoke a dvi-previewer. [Default is "start" - under MS-WINDOWS; under more recent versions of Windows, this + 30 September 2008 14 - 28 September 2008 14 +LATEXMK(1L) LATEXMK(1L) + are because [4m@default_files[24m is an array variable, i.e., a + sequence of filename specifications is possible. -LATEXMK(1L) LATEXMK(1L) + [1m$dvi_filter [empty][0m + The dvi file filter to be run on the newly produced dvi file + before other processing. Equivalent to specifying the [1m-dF[0m + option. + [1m$dvi_mode [0][0m + If nonzero, generate a dvi version of the document. Equivalent + to the [1m-dvi [22moption. - will cause to be run whatever command the system has associated + [1m$dvi_previewer ["start xdvi %O %S" under UNIX][0m + The command to invoke a dvi-previewer. [Default is "start" + under MS-WINDOWS; under more recent versions of Windows, this + will cause to be run whatever command the system has associated with .dvi files.] - $dvi_previewer_landscape ["start xdvi %O %S"] + [1m$dvi_previewer_landscape ["start xdvi %O %S"][0m The command to invoke a dvi-previewer in landscape mode. [Default is "start" under MS-WINDOWS; under more recent versions - of Windows, this will cause to be run whatever command the sys- + of Windows, this will cause to be run whatever command the sys- tem has associated with .dvi files.] - $dvipdf ["dvipdf %O %S %D"] + [1m$dvipdf ["dvipdf %O %S %D"][0m Command to convert dvi to pdf file. A common reconfiguration is - to use the dvipdfm command, which needs its arguments in a dif- + to use the dvipdfm command, which needs its arguments in a dif- ferent order: $dvipdf = "dvipdfm %O -o %D %S"; - WARNING: The default dvipdf script generates pdf files with + WARNING: The default dvipdf script generates pdf files with bitmapped fonts, which do not look good when viewed by acroread. - That script should be modified to give dvips the options "-P + That script should be modified to give dvips the options "-P pdf" to ensure that type 1 fonts are used in the pdf file. - $dvips ["dvips %O -o %D %S"] - The program to used as a filter to convert a .dvi file to a .ps - file. If pdf is going to be generated from pdf, then the value + [1m$dvips ["dvips %O -o %D %S"][0m + The program to used as a filter to convert a .dvi file to a .ps + file. If pdf is going to be generated from pdf, then the value of the $dvips_pdf_switch -- see below -- will be included in the options substituted for "%O". - $dvips_landscape ["dvips -tlandscape %O -o %D %S"] - The program to used as a filter to convert a .dvi file to a .ps + [1m$dvips_landscape ["dvips -tlandscape %O -o %D %S"][0m + The program to used as a filter to convert a .dvi file to a .ps file in landscape mode. - $dvips_pdf_switch ["-P pdf"] - Switch(es) for dvips program when pdf file is to be generated + [1m$dvips_pdf_switch ["-P pdf"][0m + Switch(es) for dvips program when pdf file is to be generated from ps file. - $dvips_silent_switch ["-q"] + [1m$dvips_silent_switch ["-q"][0m Switch(es) for dvips program when silent mode is on. - $dvi_update_command [""] - When the dvi previewer is set to be updated by running a com- - mand, this is the command that is run. See the information for - the variable $dvi_update_method for further information, and see - information on the variable $pdf_update_method for an example - for the analogous case of a pdf previewer. - - $dvi_update_method [2 under UNIX, 1 under MS-Windows] - How the dvi viewer updates its display when the dvi file has - changed. The values here apply equally to the - $pdf_update_method and to the $ps_update_method variables. - 0 => update is automatic, - 1=> manual update by user, which may only mean a mouse click - on the viewer's window or may mean a more serious action. - 2 => Send the signal, whose number is in the variable - $dvi_update_signal. The default value under UNIX is suitable - for xdvi. - 3 => Viewer cannot do an update, because it locks the file. - (As with acroread under MS-Windows.) + [1m$dvi_update_command [""][0m + When the dvi previewer is set to be updated by running a com- + mand, this is the command that is run. See the information for - 28 September 2008 15 + 30 September 2008 15 @@ -1011,518 +1007,537 @@ LATEXMK(1L) LATEXMK(1L) LATEXMK(1L) LATEXMK(1L) - 4 => run a command to do the update. The command is speci- - fied by the variable $dvi_update_command. + the variable [4m$dvi_update_method[24m for further information, and see + information on the variable [4m$pdf_update_method[24m for an example + for the analogous case of a pdf previewer. + + [1m$dvi_update_method [2 under UNIX, 1 under MS-Windows][0m + How the dvi viewer updates its display when the dvi file has + changed. The values here apply equally to the + [4m$pdf_update_method[24m and to the [4m$ps_update_method[24m variables. + 0 => update is automatic, + 1=> manual update by user, which may only mean a mouse click + on the viewer's window or may mean a more serious action. + 2 => Send the signal, whose number is in the variable + [4m$dvi_update_signal[24m. The default value under UNIX is suitable + for xdvi. + 3 => Viewer cannot do an update, because it locks the file. + (As with acroread under MS-Windows.) + 4 => run a command to do the update. The command is speci- + fied by the variable [4m$dvi_update_command[24m. - See information on the variable $pdf_update_method for an exam- + See information on the variable [4m$pdf_update_method[24m for an exam- ple of updating by command. - $dvi_update_signal [Under UNIX: SIGUSR1, which is a system-dependent - value] - The number of the signal that is sent to the dvi viewer when it - is updated by sending a signal -- see the information on the - variable $dvi_update_method. The default value is the one + [1m$dvi_update_signal [Under UNIX: SIGUSR1, which is a system-dependent[0m + [1mvalue][0m + The number of the signal that is sent to the dvi viewer when it + is updated by sending a signal -- see the information on the + variable [4m$dvi_update_method[24m. The default value is the one appropriate for xdvi on a UNIX system. - $fdb_ext ["fdb_latexmk"] - The extension of the file which latexmk generates to contain a - database of information on source files. You will not normally + [1m$fdb_ext ["fdb_latexmk"][0m + The extension of the file which [4mlatexmk[24m generates to contain a + database of information on source files. You will not normally need to change this. - $force_mode [0] - If nonzero, continue processing past minor latex errors includ- + [1m$force_mode [0][0m + If nonzero, continue processing past minor [4mlatex[24m errors includ- ing unrecognized cross references. Equivalent to specifying the - -f option. + [1m-f [22moption. - @generated_exts [( aux , bbl , idx , ind , lof , lot , out , toc , - $fdb_ext )] - This contains a list of extensions for files that are generated - during a LaTeX run and that are read in by LaTeX in later runs, + [1m@generated_exts [( aux , bbl , idx , ind , lof , lot , out , toc ,[0m + [1m$fdb_ext )][0m + This contains a list of extensions for files that are generated + during a LaTeX run and that are read in by LaTeX in later runs, either directly or indirectly. - This list has two uses: (a) to set the kinds of file to be - deleted in a cleanup operation (with the -c, -C, -CA, -g and -gg - options), and (b) in the determination of whether a rerun of + This list has two uses: (a) to set the kinds of file to be + deleted in a cleanup operation (with the [1m-c[22m, [1m-C[22m, [1m-CA[22m, [1m-g [22mand [1m-gg[0m + options), and (b) in the determination of whether a rerun of (pdf)LaTeX is needed after a run that gives an error. (Normally, a change of a source file during a run should provoke - a rerun. This includes a file generated by LaTeX, e.g., an aux - file, that is read in on subsequent runs. But after a run that - results in an error, a new run should occur until the user has - made a change in the files. But the user may have corrected an - error in a source .tex file during the run. So latexmk needs to - distinguish user-generated and automatically generated files; it - determines the automatically generated files as those with - extensions in the list in @generated_exts.) + a rerun. This includes a file generated by LaTeX, e.g., an aux + file, that is read in on subsequent runs. But after a run that + results in an error, a new run should occur until the user has + made a change in the files. But the user may have corrected an + error in a source .tex file during the run. So [4mlatexmk[24m needs to - A convenient way to add an extra extension to the list, without - losing the already defined ones is to use a push command in the - line in an RC file. E.g., - push @generated_exts, "end"; - - adds the extension "end" to the list of predefined generated - extensions. (This extension is used by the RevTeX package, for - example.) - $go_mode [0] - If nonzero, process files regardless of timestamps, and is then - equivalent to the -g option. + 30 September 2008 16 - 28 September 2008 16 +LATEXMK(1L) LATEXMK(1L) + distinguish user-generated and automatically generated files; it + determines the automatically generated files as those with + extensions in the list in @generated_exts.) -LATEXMK(1L) LATEXMK(1L) + A convenient way to add an extra extension to the list, without + losing the already defined ones is to use a push command in the + line in an RC file. E.g., + push @generated_exts, "end"; - %hash_calc_ignore_pattern - !!!This variable is for experts only!!! + adds the extension "end" to the list of predefined generated + extensions. (This extension is used by the RevTeX package, for + example.) - The general rule latexmk uses for determining when an extra run - of some program is needed is that one of the source files has - changed. But consider for example a latex package that causes - an encapsulated postscript file (an "eps" file) to be made that - is to be read in on the next run. The file contains a comment - line giving its creation date and time. On the next run the - time changes, latex sees that the eps file has changed, and - therefore reruns latex. This causes an infinite loop, only - exited becaues latexmk has a limit on the number of runs to + [1m$go_mode [0][0m + If nonzero, process files regardless of timestamps, and is then + equivalent to the [1m-g [22moption. + + [1m%hash_calc_ignore_pattern[0m + [1m!!!This variable is for experts only!!![0m + + The general rule [4mlatexmk[24m uses for determining when an extra run + of some program is needed is that one of the source files has + changed. But consider for example a latex package that causes + an encapsulated postscript file (an "eps" file) to be made that + is to be read in on the next run. The file contains a comment + line giving its creation date and time. On the next run the + time changes, [4mlatex[24m sees that the eps file has changed, and + therefore reruns latex. This causes an infinite loop, only + exited becaues [4mlatexmk[24m has a limit on the number of runs to guard against pathological situations. But the changing line has no real effect, since it is a comment. - You can instruct latex to ignore the offending line as follows: + You can instruct [4mlatex[24m to ignore the offending line as follows: $hash_calc_ignore_pattern{'eps'} = '^%%CreationDate: '; - This creates a rule for files with extension .eps about lines to - ignore. The left-hand side is a Perl idiom for setting an item - in a hash. Note that the file extension is specified without a + This creates a rule for files with extension [4m.eps[24m about lines to + ignore. The left-hand side is a [4mPerl[24m idiom for setting an item + in a hash. Note that the file extension is specified without a period. The value, on the right-hand side, is a string contain- - ing a regular expresssion. (See documentation on Perl for how - they are to be specified in general.) This particular regular - expression specifies that lines beginning with "%%CreationDate: - " are to be ignored in deciding whether a file of the given - extension .eps has changed. - - $kpsewhich ["kpsewhich %S"] - The program called to locate a source file when the name alone - is not sufficient. Most filenames used by latexmk have suffi- - cient path information to be found directly. But sometimes, - notably when the file, but not its path is known. The program + ing a regular expresssion. (See documentation on [4mPerl[24m for how + they are to be specified in general.) This particular regular + expression specifies that lines beginning with "%%CreationDate: + " are to be ignored in deciding whether a file of the given + extension [4m.eps[24m has changed. + + [1m$kpsewhich ["kpsewhich %S"][0m + The program called to locate a source file when the name alone + is not sufficient. Most filenames used by [4mlatexmk[24m have suffi- + cient path information to be found directly. But sometimes, + notably when the file, but not its path is known. The program specified by $kpsewhich is used to find it. - See also the @BIBINPUTS variable for another way that latexmk + See also the [4m@BIBINPUTS[24m variable for another way that [4mlatexmk[0m also uses to try to locate files; it applies only in the case of - .bib files. - $landscape_mode [0] - If nonzero, run in landscape mode, using the landscape mode pre- - viewers and dvi to postscript converters. Equivalent to the -l - option. Normally not needed with current previewers. - $latex ["latex %O %S"] - The LaTeX processing program. Note that as with other programs, - you can use this variable not just to change the name of the - program used, but also specify options to the program. E.g., - $latex = "latex --src-specials"; + 30 September 2008 17 - $latex_silent_switch ["-interaction=batchmode"] - Switch(es) for the LaTeX processing program when silent mode is - on. Under MS-Windows, the default value is changed to "-inter- - action=batchmode -c-style-errors", as used by MikTeX and fpTeX. - 28 September 2008 17 +LATEXMK(1L) LATEXMK(1L) + .bib files. + [1m$landscape_mode [0][0m + If nonzero, run in landscape mode, using the landscape mode pre- + viewers and dvi to postscript converters. Equivalent to the [1m-l[0m + option. Normally not needed with current previewers. + [1m$latex ["latex %O %S"][0m + The LaTeX processing program. Note that as with other programs, + you can use this variable not just to change the name of the + program used, but also specify options to the program. E.g., -LATEXMK(1L) LATEXMK(1L) + $latex = "latex --src-specials"; + [1m$latex_silent_switch ["-interaction=batchmode"][0m + Switch(es) for the LaTeX processing program when silent mode is + on. Under MS-Windows, the default value is changed to "-inter- + action=batchmode -c-style-errors", as used by MikTeX and fpTeX. - $lpr ["lpr %O %S" under UNIX/LINUX, "NONE lpr" under MS-WINDOWS] + [1m$lpr ["lpr %O %S" under UNIX/LINUX, "NONE lpr" under MS-WINDOWS][0m The command to print postscript files. - Under MS-Windows (unlike UNIX/LINUX), there is no standard pro- + Under MS-Windows (unlike UNIX/LINUX), there is no standard pro- gram for printing files. But there are ways you can do it. For example, if you have gsview installed, you could use it with the option "/p": $lpr = '"c:/Program Files/Ghostgum/gsview/gsview32.exe" /p'; - If gsview is installed in a different directory, you will need - to make the appropriate change. Note the combination of single - and double quotes around the name. The single quotes specify - that this is a string to be assigned to the configuration vari- - able $lpr. The double quotes are part of the string passed to - the operating system to get the command obeyed; this is neces- + If gsview is installed in a different directory, you will need + to make the appropriate change. Note the combination of single + and double quotes around the name. The single quotes specify + that this is a string to be assigned to the configuration vari- + able [4m$lpr[24m. The double quotes are part of the string passed to + the operating system to get the command obeyed; this is neces- sary because one part of the command name ("Program Files") con- tains a space which would otherwise be misinterpreted. - $lpr_dvi ["NONE lpr_dvi"] + [1m$lpr_dvi ["NONE lpr_dvi"][0m The printing program to print dvi files. - $lpr_pdf ["NONE lpr_pdf"] + [1m$lpr_pdf ["NONE lpr_pdf"][0m The printing program to print pdf files. - Under MS-Windows you could set this to use gsview, if it is + Under MS-Windows you could set this to use gsview, if it is installed, e.g., $lpr = '"c:/Program Files/Ghostgum/gsview/gsview32.exe" /p'; - If gsview is installed in a different directory, you will need - to make the appropriate change. Note the double quotes around + If gsview is installed in a different directory, you will need + to make the appropriate change. Note the double quotes around the name: this is necessary because one part of the command name ("Program Files") contains a space which would otherwise be mis- interpreted. - $makeindex ["makeindex %O -o %D %S"] - The index processing program. - $max_repeat [5] - The maximum number of times latexmk will run latex/pdflatex - before deciding that there may be an infinite loop and that it - needs to bail out, rather than rerunning latex/pdflatex again to - resolve cross-references, etc. The default value covers all - normal cases. - (Note that the "etc" covers a lot of cases where one run of - latex/pdflatex generates files to be read in on a later run.) - $new_viewer_always [0] - This variable applies to latexmk only in continuous-preview - mode. If $new_viewer_always is 0, latexmk will check for a pre- - viously running previewer on the same file, and if one is run- - ning will not start a new one. If $new_viewer_always is non- - zero, this check will be skipped, and latexmk will behave as if - no viewer is running. + 30 September 2008 18 - 28 September 2008 18 +LATEXMK(1L) LATEXMK(1L) + [1m$makeindex ["makeindex %O -o %D %S"][0m + The index processing program. -LATEXMK(1L) LATEXMK(1L) + [1m$max_repeat [5][0m + The maximum number of times [4mlatexmk[24m will run latex/pdflatex + before deciding that there may be an infinite loop and that it + needs to bail out, rather than rerunning latex/pdflatex again to + resolve cross-references, etc. The default value covers all + normal cases. + + (Note that the "etc" covers a lot of cases where one run of + latex/pdflatex generates files to be read in on a later run.) + [1m$new_viewer_always [0][0m + This variable applies to [4mlatexmk[24m [1monly [22min continuous-preview + mode. If [4m$new_viewer_always[24m is 0, [4mlatexmk[24m will check for a pre- + viously running previewer on the same file, and if one is run- + ning will not start a new one. If [4m$new_viewer_always[24m is non- + zero, this check will be skipped, and [4mlatexmk[24m will behave as if + no viewer is running. - $pdf_mode [0] - If zero, do NOT generate a pdf version of the document. If - equal to 1, generate a pdf version of the document using pdfla- + [1m$pdf_mode [0][0m + If zero, do NOT generate a pdf version of the document. If + equal to 1, generate a pdf version of the document using pdfla- tex. If equal to 2, generate a pdf version of the document from - the ps file, by using the command specified by the $ps2pdf vari- - able. If equal to 3, generate a pdf version of the document - from the dvi file, by using the command specified by the $dvipdf + the ps file, by using the command specified by the [4m$ps2pdf[24m vari- + able. If equal to 3, generate a pdf version of the document + from the dvi file, by using the command specified by the [4m$dvipdf[0m variable. - Equivalent to the -pdf-, -pdf, -pdfdvi, -pdfps options. + Equivalent to the [1m-pdf-[22m, [1m-pdf[22m, [1m-pdfdvi[22m, [1m-pdfps [22moptions. - $pdflatex ["pdflatex %O %S"] - The LaTeX processing program in the version that makes a pdf + [1m$pdflatex ["pdflatex %O %S"][0m + The LaTeX processing program in the version that makes a pdf file instead of a dvi file. - $pdflatex_silent_switch ["-interaction=batchmode"] - Switch(es) for the pdflatex program (specified in the variable - $pdflatex when silent mode is on. Under MS-Windows, the default + [1m$pdflatex_silent_switch ["-interaction=batchmode"][0m + Switch(es) for the pdflatex program (specified in the variable + [4m$pdflatex[24m when silent mode is on. Under MS-Windows, the default value is changed to "-interaction=batchmode -c-style-errors", as used by MikTeX and fpTeX. - $pdf_previewer ["start acroread %O %S"] - The command to invoke a pdf-previewer. [Default is changed to - "start" on MS-WINDOWS; under more recent versions of Windows, - this will cause to be run whatever command the system has asso- + [1m$pdf_previewer ["start acroread %O %S"][0m + The command to invoke a pdf-previewer. [Default is changed to + "start" on MS-WINDOWS; under more recent versions of Windows, + this will cause to be run whatever command the system has asso- ciated with .pdf files.] - WARNING: Potential problem under MS-Windows: if acroread is used + [1mWARNING[22m: Potential problem under MS-Windows: if acroread is used as the pdf previewer, and it is actually viewing a pdf file, the pdf file cannot be updated. Thus makes acroread a bad choice of - previewer if you use latexmk's previous-continuous mode (option - -pvc) under MS-windows. This problem does not occur if + previewer if you use [4mlatexmk[24m's previous-continuous mode (option + [1m-pvc[22m) under MS-windows. This problem does not occur if ghostview, gv or gsview is used to view pdf files. - $pdf_update_command [""] - When the pdf previewer is set to be updated by running a com- - mand, this is the command that is run. See the information for - the variable $pdf_update_method. + [1m$pdf_update_command [""][0m + When the pdf previewer is set to be updated by running a com- + mand, this is the command that is run. See the information for - $pdf_update_method [1 under UNIX, 3 under MS-Windows] - How the pdf viewer updates its display when the pdf file has - changed. See the information on the variable $dvi_update_method - for the codes. (Note that information needs be changed slightly - so that for the value 4, to run a command to do the update, the - command is specified by the variable $pdf_update_command, and - for the value 2, to specify update by signal, the signal is - specified by $pdf_update_signal.) - Note that acroread under MS-Windows (but not UNIX) locks the pdf - file, so the default value is then 3. - Arranging to use a command to get a previewer explicitly updated - requires three variables to be set. For example: + 30 September 2008 19 - $pdf_previewer = "start xpdf -remote %R %O %S"; - $pdf_update_method = 4; - $pdf_update_command = "xpdf -remote %R -reload"; - 28 September 2008 19 +LATEXMK(1L) LATEXMK(1L) + the variable [4m$pdf_update_method[24m. + [1m$pdf_update_method [1 under UNIX, 3 under MS-Windows][0m + How the pdf viewer updates its display when the pdf file has + changed. See the information on the variable [4m$dvi_update_method[0m + for the codes. (Note that information needs be changed slightly + so that for the value 4, to run a command to do the update, the + command is specified by the variable [4m$pdf_update_command[24m, and + for the value 2, to specify update by signal, the signal is + specified by [4m$pdf_update_signal[24m.) -LATEXMK(1L) LATEXMK(1L) + Note that acroread under MS-Windows (but not UNIX) locks the pdf + file, so the default value is then 3. + Arranging to use a command to get a previewer explicitly updated + requires three variables to be set. For example: - The first setting arranges for the xpdf program to be used in - its "remote server mode", with the server name specified as the - rootname of the TeX file. The second setting arranges for + $pdf_previewer = "start xpdf -remote %R %O %S"; + $pdf_update_method = 4; + $pdf_update_command = "xpdf -remote %R -reload"; + + The first setting arranges for the xpdf program to be used in + its "remote server mode", with the server name specified as the + rootname of the TeX file. The second setting arranges for updating to be done in response to a command, and the third set- ting sets the update command. - $pdf_update_signal [Under UNIX: SIGHUP, which is a system-dependent - value] - The number of the signal that is sent to the pdf viewer when it - is updated by sending a signal -- see the information on the - variable $pdf_update_method. The default value is the one + [1m$pdf_update_signal [Under UNIX: SIGHUP, which is a system-dependent[0m + [1mvalue][0m + The number of the signal that is sent to the pdf viewer when it + is updated by sending a signal -- see the information on the + variable [4m$pdf_update_method[24m. The default value is the one appropriate for gv on a UNIX system. - $pid_position[1 under UNIX, -1 under MS-Windows] - The variable $pid_position is used to specify which word in - lines of the output from $pscmd corresponds to the process ID. - The first word in the line is numbered 0. The default value of + [1m$pid_position[1 under UNIX, -1 under MS-Windows][0m + The variable [4m$pid_position[24m is used to specify which word in + lines of the output from [4m$pscmd[24m corresponds to the process ID. + The first word in the line is numbered 0. The default value of 1 (2nd word in line) is correct for Solaris 2.6 and Linux. Set- - ting the variable to -1 is used to indicate that $pscmd is not + ting the variable to -1 is used to indicate that [4m$pscmd[24m is not to be used. - $postscript_mode [0] - If nonzero, generate a postscript version of the document. - Equivalent to the -ps option. + [1m$postscript_mode [0][0m + If nonzero, generate a postscript version of the document. + Equivalent to the [1m-ps [22moption. - $preview_continuous_mode [0] - If nonzero, run a previewer to view the document, and continue - running latexmk to keep .dvi up-to-date. Equivalent to the -pvc - option. Which previewer is run depends on the other settings, - see the command line options -view=, and the variable $view. + [1m$preview_continuous_mode [0][0m + If nonzero, run a previewer to view the document, and continue + running [4mlatexmk[24m to keep .dvi up-to-date. Equivalent to the [1m-pvc[0m + option. Which previewer is run depends on the other settings, + see the command line options [1m-view=[22m, and the variable [4m$view[24m. - $preview_mode [0] + [1m$preview_mode [0][0m If nonzero, run a previewer to preview the document. Equivalent - to the -pv option. Which previewer is run depends on the other - settings, see the command line options -view=, and the variable - $view. - - $printout_mode [0] - If nonzero, print the document using lpr. Equivalent to the -p - option. This is recommended not to be set from an RC file, oth- - erwise you could waste lots of paper. + to the [1m-pv [22moption. Which previewer is run depends on the other + settings, see the command line options [1m-view=[22m, and the variable + [4m$view[24m. - $print_type = ["ps"] - Type of file to printout: possibilities are "dvi", "none", - "pdf", or "ps". - $pscmd Command used to get all the processes currently run by the user. - The -pvc option uses the command specified by the variable - $pscmd to determine if there is an already running previewer, - and to find the process ID (needed if latexmk needs to signal - the previewer about file changes). - Each line of the output of this command is assumed to correspond - to one process. See the $pid_position variable for how the pro- - cess number is determined. + 30 September 2008 20 - 28 September 2008 20 +LATEXMK(1L) LATEXMK(1L) + [1m$printout_mode [0][0m + If nonzero, print the document using [4mlpr[24m. Equivalent to the [1m-p[0m + option. This is recommended [1mnot [22mto be set from an RC file, oth- + erwise you could waste lots of paper. + [1m$print_type = ["ps"][0m + Type of file to printout: possibilities are "dvi", "none", + "pdf", or "ps". -LATEXMK(1L) LATEXMK(1L) + [1m$pscmd [22mCommand used to get all the processes currently run by the user. + The -pvc option uses the command specified by the variable + [4m$pscmd[24m to determine if there is an already running previewer, + and to find the process ID (needed if [4mlatexmk[24m needs to signal + the previewer about file changes). + Each line of the output of this command is assumed to correspond + to one process. See the [4m$pid_position[24m variable for how the pro- + cess number is determined. - The default for pscmd is "NONE" under MS-Windows and cygwin + The default for [4mpscmd[24m is "NONE" under MS-Windows and cygwin (i.e., the command is not used), "ps --width 200 -f -u - $ENV{USER}" under linux, "ps -ww -u $ENV{USER}" under darwin - (Macintosh OS-X), and "ps -f -u $ENV{USER}" under other operat- - ing systems (including other flavors of UNIX). In these speci- + $ENV{USER}" under linux, "ps -ww -u $ENV{USER}" under darwin + (Macintosh OS-X), and "ps -f -u $ENV{USER}" under other operat- + ing systems (including other flavors of UNIX). In these speci- fications "$ENV{USER}" is substituted by the username. - $ps2pdf ["ps2pdf %O %S %D"] + [1m$ps2pdf ["ps2pdf %O %S %D"][0m Command to convert ps to pdf file. - $ps_filter [empty] - The postscript file filter to be run on the newly produced + [1m$ps_filter [empty][0m + The postscript file filter to be run on the newly produced postscript file before other processing. Equivalent to specify- - ing the -pF option. + ing the [1m-pF [22moption. - $ps_previewer ["start gv %O %S", but "start %O %S" under MS-WINDOWS] - The command to invoke a ps-previewer. (The default under MS- - WINDOWS will cause to be run whatever command the system has + [1m$ps_previewer ["start gv %O %S", but "start %O %S" under MS-WINDOWS][0m + The command to invoke a ps-previewer. (The default under MS- + WINDOWS will cause to be run whatever command the system has associated with .ps files.) - Note that gv could be used with the -watch option updates its - display whenever the postscript file changes, whereas ghostview - does not. However, different versions of gv have slightly dif- - ferent ways of writing this option. You can configure this + Note that gv could be used with the -watch option updates its + display whenever the postscript file changes, whereas ghostview + does not. However, different versions of gv have slightly dif- + ferent ways of writing this option. You can configure this variable apppropriately. - WARNING: Linux systems may have installed one (or more) versions - of gv under different names, e.g., ggv, kghostview, etc, but + [1mWARNING[22m: Linux systems may have installed one (or more) versions + of gv under different names, e.g., ggv, kghostview, etc, but perhaps not one called gv. - $ps_previewer_landscape ["start gv -swap %O %S", but "start %O %S" - under MS-WINDOWS] + [1m$ps_previewer_landscape ["start gv -swap %O %S", but "start %O %S"[0m + [1munder MS-WINDOWS][0m The command to invoke a ps-previewer in landscape mode. - $ps_update_command [""] - When the postscript previewer is set to be updated by running a - command, this is the command that is run. See the information - for the variable $ps_update_method. + [1m$ps_update_command [""][0m + When the postscript previewer is set to be updated by running a + command, this is the command that is run. See the information + for the variable [4m$ps_update_method[24m. - $ps_update_method [0 under UNIX, 1 under MS-Windows] - How the postscript viewer updates its display when the ps file - has changed. See the information on the variable - $dvi_update_method for the codes. (Note that information needs - be changed slightly so that for the value 4, to run a command to - do the update, the command is specified by the variable - $ps_update_command, and for the value 2, to specify update by - signal, the signal is specified by $ps_update_signal.) - $ps_update_signal [Under UNIX: SIGHUP, which is a system-dependent - value] - The number of the signal that is sent to the pdf viewer when it - is updated by sending a signal -- see $ps_update_method. The - default value is the one appropriate for gv on a UNIX system. - $sleep_time [2] - The time to sleep (in seconds) between checking for source file - changes when running the -pvc option. + 30 September 2008 21 + - 28 September 2008 21 +LATEXMK(1L) LATEXMK(1L) + [1m$ps_update_method [0 under UNIX, 1 under MS-Windows][0m + How the postscript viewer updates its display when the ps file + has changed. See the information on the variable + [4m$dvi_update_method[24m for the codes. (Note that information needs + be changed slightly so that for the value 4, to run a command to + do the update, the command is specified by the variable + [4m$ps_update_command[24m, and for the value 2, to specify update by + signal, the signal is specified by [4m$ps_update_signal[24m.) -LATEXMK(1L) LATEXMK(1L) + [1m$ps_update_signal [Under UNIX: SIGHUP, which is a system-dependent[0m + [1mvalue][0m + The number of the signal that is sent to the pdf viewer when it + is updated by sending a signal -- see [4m$ps_update_method[24m. The + default value is the one appropriate for gv on a UNIX system. + [1m$sleep_time [2][0m + The time to sleep (in seconds) between checking for source file + changes when running the [1m-pvc [22moption. - $texfile_search [""] - This is an obsolete variable, replaced by the @default_files + [1m$texfile_search [""][0m + This is an obsolete variable, replaced by the [4m@default_files[0m variable. - For backward compatibility, if you choose to set $tex- - file_search, it is a string of space-separated filenames, and - then latexmk replaces @default_files with the filenames in $tex- - file_search to which is added "*.tex". + For backward compatibility, if you choose to set [4m$tex-[0m + [4mfile_search[24m, it is a string of space-separated filenames, and + then [4mlatexmk[24m replaces [4m@default_files[24m with the filenames in [4m$tex-[0m + [4mfile_search[24m to which is added "*.tex". - $tmpdir [See below for default] - Directory to store temporary files that latexmk may generate + [1m$tmpdir [See below for default][0m + Directory to store temporary files that [4mlatexmk[24m may generate while running. - The default under MSWindows (including cygwin), is to set - $tmpdir to the value of the first of whichever of the system - environment variables TMPDIR or TEMP exists, otherwise to the - current directory. Under other operating systems (expected to - be UNIX/Linux, including OS-X), the default is the value of the - system environment variable TMPDIR if it exists, otherwise + The default under MSWindows (including cygwin), is to set + [4m$tmpdir[24m to the value of the first of whichever of the system + environment variables TMPDIR or TEMP exists, otherwise to the + current directory. Under other operating systems (expected to + be UNIX/Linux, including OS-X), the default is the value of the + system environment variable TMPDIR if it exists, otherwise "/tmp". - $view ["default"] - Which kind of file is to be previewed if a previewer is used. - The possible values are "default", "dvi", "ps", "pdf". The + [1m$view ["default"][0m + Which kind of file is to be previewed if a previewer is used. + The possible values are "default", "dvi", "ps", "pdf". The value of "default" means that the "highest" of the kinds of file generated is to be used (among dvi, ps and pdf). -CUSTOM DEPENDENCIES - In any RC file a set of custom dependencies can be set up to convert a +[1mCUSTOM DEPENDENCIES[0m + In any RC file a set of custom dependencies can be set up to convert a file with one extension to a file with another. An example use of this - would be to allow latexmk to convert a .fig file to .eps to be included - in the .tex file. + would be to allow [4mlatexmk[24m to convert a [4m.fig[24m file to [4m.eps[24m to be included + in the [4m.tex[24m file. - The old method of configuring latexmk was to directly manipulate the - @cus_dep_list array that contains information defining the custom - dependencies. This method still works. But now there are subroutines - that allow convenient manipulations of the custom dependency list. - These are + The old method of configuring [4mlatexmk[24m was to directly manipulate the + [1m@cus_dep_list [22marray that contains information defining the custom + dependencies. This method still works. But now there are subroutines + that allow convenient manipulations of the custom dependency list. - add_cus_dep( fromextension, toextension, must, subroutine ) - remove_cus_dep( fromextension, toextension ) - show_cus_dep() - The custom dependency is a list of rules, each of which is specified as - follow: - from extension: - The extension of the file we are converting from (e.g. "fig"). - It is specified without a period. + 30 September 2008 22 - to extension: - The extension of the file we are converting to (e.g. "eps"). It - is specified without a period. - must: If non-zero, the file from which we are converting must exist, - if it doesn't exist latexmk will give an error message and exit - unless the -f option is specified. If must is zero and the file - 28 September 2008 22 +LATEXMK(1L) LATEXMK(1L) + These are + add_cus_dep( fromextension, toextension, must, subroutine ) + remove_cus_dep( fromextension, toextension ) + show_cus_dep() + The custom dependency is a list of rules, each of which is specified as + follow: -LATEXMK(1L) LATEXMK(1L) + [1mfrom extension:[0m + The extension of the file we are converting from (e.g. "fig"). + It is specified without a period. + [1mto extension:[0m + The extension of the file we are converting to (e.g. "eps"). It + is specified without a period. + [1mmust: [22mIf non-zero, the file from which we are converting [1mmust [22mexist, + if it doesn't exist [4mlatexmk[24m will give an error message and exit + unless the [1m-f [22moption is specified. If [4mmust[24m is zero and the file we are converting from doesn't exist, then no action is taken. - function: - The name of the subroutine that latexmk should call to perform - the file conversion. The first argument to the subroutine is + [1mfunction:[0m + The name of the subroutine that [4mlatexmk[24m should call to perform + the file conversion. The first argument to the subroutine is the base name of the file to be converted without any extension. - The subroutines are declared in the syntax of Perl. The func- - tion should return 0 if it was successful and a nonzero number + The subroutines are declared in the syntax of [4mPerl[24m. The func- + tion should return 0 if it was successful and a nonzero number if it failed. - It is invoked whenever latexmk detects that a run of latex/pdflatex - needs to read a file, like a graphics file, whose extension is the to- - extension of a custom dependency. Then latexmk examines whether a file - exists with the same name, but with the corresponding from-extension, - as specified in the custom-dependency rule. If it does, then whenever - the destination file (the one with the to-extension) is out-of-date + It is invoked whenever [4mlatexmk[24m detects that a run of latex/pdflatex + needs to read a file, like a graphics file, whose extension is the to- + extension of a custom dependency. Then [4mlatexmk[24m examines whether a file + exists with the same name, but with the corresponding from-extension, + as specified in the custom-dependency rule. If it does, then whenever + the destination file (the one with the to-extension) is out-of-date with respect to the corresponding source file. - To make the new destination file, the Perl subroutine specified in the + To make the new destination file, the [4mPerl[24m subroutine specified in the rule is invoked, with an argument that is the base name of the files in - question. Simple cases just involve a subroutine invoking an external - program; this can be done by following the templates below, even by - those without knowledge of the Perl programming language. Of course, + question. Simple cases just involve a subroutine invoking an external + program; this can be done by following the templates below, even by + those without knowledge of the [4mPerl[24m programming language. Of course, experts could do something much more elaborate. - One other item in each custom-dependency rule labelled "must" above - specifies how the rule should be applied when the source file fails to + One other item in each custom-dependency rule labelled "must" above + specifies how the rule should be applied when the source file fails to exist. A simple and typical example of code in an initialization rcfile is @@ -1532,45 +1547,45 @@ LATEXMK(1L) LATEXMK(1L) system("fig2dev -Leps $_[0].fig $_[0].eps"); } - The first line adds a custom dependency that converts a file with - extension "fig", as created by the xfig program, to an encapsulated - postscript file, with extension "eps". The remaining lines define a - subroutine that carries out the conversion. If a rule for converting - "fig" to "eps" files already exists (e.g., from a previously read-in - initialization file), the latexmk will delete this rule before making - the new one. + The first line adds a custom dependency that converts a file with + extension "fig", as created by the xfig program, to an encapsulated - Suppose latexmk is using this rule to convert a file "figure.fig" to - "figure.eps". Then it will invoke the fig2eps subroutine defined in - the above code with a single argument "figure", which is the basename - of each of the files (possibly with a path component). This argument - is referred to by Perl as $_[0]. In the example above, the subroutine - uses the Perl command system to invoke the program fig2dev. The double - quotes around the string are a Perl idiom that signify that each string - of the form of a variable name, $_[0] in this case, is to be substi- - tuted by its value. - If the return value of the subroutine is non-zero, then latexmk will - assume an error occurred during the execution of the subroutine. In - the above example, no explicit return value is given, and instead the - return value is the value returned by the last (and only) statement, + 30 September 2008 23 - 28 September 2008 23 +LATEXMK(1L) LATEXMK(1L) -LATEXMK(1L) LATEXMK(1L) + postscript file, with extension "eps". The remaining lines define a + subroutine that carries out the conversion. If a rule for converting + "fig" to "eps" files already exists (e.g., from a previously read-in + initialization file), the [4mlatexmk[24m will delete this rule before making + the new one. + Suppose [4mlatexmk[24m is using this rule to convert a file "figure.fig" to + "figure.eps". Then it will invoke the fig2eps subroutine defined in + the above code with a single argument "figure", which is the basename + of each of the files (possibly with a path component). This argument + is referred to by [4mPerl[24m as $_[0]. In the example above, the subroutine + uses the [4mPerl[24m command system to invoke the program fig2dev. The double + quotes around the string are a [4mPerl[24m idiom that signify that each string + of the form of a variable name, $_[0] in this case, is to be substi- + tuted by its value. + If the return value of the subroutine is non-zero, then [4mlatexmk[24m will + assume an error occurred during the execution of the subroutine. In + the above example, no explicit return value is given, and instead the + return value is the value returned by the last (and only) statement, i.e., the invocation of system, which returns the value 0 on success. - If you use filenames with spaces in them, and if your LaTeX system and - all other relevant software correctly handle such filenames, then you - could put single quotes around filenames in the command line that is + If you use filenames with spaces in them, and if your LaTeX system and + all other relevant software correctly handle such filenames, then you + could put single quotes around filenames in the command line that is executed: add_cus_dep( 'fig', 'eps', 0, 'fig2eps' ); @@ -1578,15 +1593,15 @@ LATEXMK(1L) LATEXMK(1L) system("fig2dev -Lps '$_[0].fig' '$_[0].eps'"); } - This causes the invocation of the fig2dev program to have quoted file- - names; it should therefore work with filenames containing spaces. How- - ever, not all software deals correctly with filenames that contain - spaces. Moreover, the rules, if any, for quoting filenames vary - between operating systems, command shells and individual pieces of - software, so this code may not always work. + This causes the invocation of the [4mfig2dev[24m program to have quoted file- + names; it should therefore work with filenames containing spaces. [1mHow-[0m + [1mever, not all software deals correctly with filenames that contain[0m + [1mspaces. Moreover, the rules, if any, for quoting filenames vary[0m + [1mbetween operating systems, command shells and individual pieces of[0m + [1msoftware, so this code may not always work.[0m - If you use pdflatex instead of latex, then you will probably prefer to - convert your graphics files to pdf format, in which case you would + If you use pdflatex instead of latex, then you will probably prefer to + convert your graphics files to pdf format, in which case you would replace the above code in an initialization file by add_cus_dep( 'fig', 'pdf, 0, 'fig2pdf' ); @@ -1594,141 +1609,139 @@ LATEXMK(1L) LATEXMK(1L) system("fig2dev -Lpdf $_[0].fig $_[0].pdf"); } - If you have some general custom dependencies defined in the system or - user initialization file, you may find that for a particular project - they are undesirable. So you might want to delete the unneeded ones. + If you have some general custom dependencies defined in the system or + user initialization file, you may find that for a particular project + they are undesirable. So you might want to delete the unneeded ones. For example, you remove any "fig" to "eps" rule by the line remove_cus_dep( 'fig', 'eps' ); - If you have complicated sets of custom dependencies, you may want to - get a listing of the custom dependencies. This is done by using the + If you have complicated sets of custom dependencies, you may want to + get a listing of the custom dependencies. This is done by using the line - show_cus_dep(); - - in an initialization file. - Another example of a custom dependency overcomes a limitation of - latexmk concerning index files. The only index-file conversion built- - in to latexmk is from an ".idx" file written on one run of latex/pdfla- - tex to an ".ind" file to be read in on a subsequent run. But with the - index.sty package you can create extra indexes with extensions that you - configure. Latexmk does not know how to deduce the extensions from the - information it has. But you can easily write a custom dependency. For - example if your latex file uses the command "\newindex{spe- - cial}{ndx}{nnd}{Special index}" you will need to convert files with the - extension .ndx to .nnd. The following lines in an initialization RC - file will cause this to happen: - add_cus_dep('ndx', 'nnd', 0, 'makendx2nnd'); - sub makendx2nnd { - system("makeindex -o $_[0].nnd $_[0].ndx"); + 30 September 2008 24 - 28 September 2008 24 +LATEXMK(1L) LATEXMK(1L) + show_cus_dep(); -LATEXMK(1L) LATEXMK(1L) + in an initialization file. + Another example of a custom dependency overcomes a limitation of + [4mlatexmk[24m concerning index files. The only index-file conversion built- + in to [4mlatexmk[24m is from an ".idx" file written on one run of latex/pdfla- + tex to an ".ind" file to be read in on a subsequent run. But with the + index.sty package you can create extra indexes with extensions that you + configure. [4mLatexmk[24m does not know how to deduce the extensions from the + information it has. But you can easily write a custom dependency. For + example if your latex file uses the command "\newindex{spe- + cial}{ndx}{nnd}{Special index}" you will need to convert files with the + extension [4m.ndx[24m to [4m.nnd[24m. The following lines in an initialization RC + file will cause this to happen: + add_cus_dep('ndx', 'nnd', 0, 'makendx2nnd'); + sub makendx2nnd { + system("makeindex -o $_[0].nnd $_[0].ndx"); } - (You will need to modify this code if you use filenames with spaces in + (You will need to modify this code if you use filenames with spaces in them, to provide correct quoting of the filenames.) - Those of you with experience with Makefiles, will undoubtedly be con- - cerned that the .ndx file is written during a run of latex/pdflatex and - is always later than the .nnd last read in. Thus the .nnd appears to - be perpetually out-of-date. This situation, of circular dependencies, - is endemic to latex, and latexmk in its current version works correctly - with circular dependencies. It examines the contents of the files (by - use of an md5 checksum), and only does a remake when the file contents + Those of you with experience with Makefiles, will undoubtedly be con- + cerned that the [4m.ndx[24m file is written during a run of latex/pdflatex and + is always later than the [4m.nnd[24m last read in. Thus the [4m.nnd[24m appears to + be perpetually out-of-date. This situation, of circular dependencies, + is endemic to latex, and [4mlatexmk[24m in its current version works correctly + with circular dependencies. It examines the contents of the files (by + use of an md5 checksum), and only does a remake when the file contents have actually changed. - Of course if you choose to write random data to the .nnd (or and .aux - file, etc) that changes on each new run, then you will have a problem. - For real experts: See the %hash_cal_ignore_pattern if you have to deal + Of course if you choose to write random data to the [4m.nnd[24m (or and [4m.aux[0m + file, etc) that changes on each new run, then you will have a problem. + For real experts: See the [4m%hash_cal_ignore_pattern[24m if you have to deal with such problems. Glossaries can be dealt with similarly. -OLD METHOD OF DEFINING CUSTOM DEPENDENCIES - In previous versions of latexmk, the only method of defining custom - dependencies was to directly manipulate the table of custom dependen- - cies. This is contained in the @cus_dep_list array. It is an array of - strings, and each string in the array has four items in it, each sepa- - rated by a space, the from-extension, the to-extension, the "must" - item, and the name of the subroutine for the custom dependency. These +[1mOLD METHOD OF DEFINING CUSTOM DEPENDENCIES[0m + In previous versions of [4mlatexmk[24m, the only method of defining custom + dependencies was to directly manipulate the table of custom dependen- + cies. This is contained in the [1m@cus_dep_list [22marray. It is an array of + strings, and each string in the array has four items in it, each sepa- + rated by a space, the from-extension, the to-extension, the "must" + item, and the name of the subroutine for the custom dependency. These were all defined above. An example of the old method of defining custom dependencies is as fol- - lows. It is the code in an RC file to ensure automatic conversion of - .fig files to .eps files: + lows. It is the code in an RC file to ensure automatic conversion of + [4m.fig[24m files to [4m.eps[24m files: push @cus_dep_list, "fig eps 0 fig2eps"; sub fig2eps { system("fig2dev -Lps $_[0].fig $_[0].eps"); } - This method still works, and is equivalent to the earlier code using - the add_cus_dep subroutine, except that it doesn't delete any previous - custom-dependency for the same conversion. So the new method is - preferable. - -SEE ALSO - latex(1), bibtex(1). -BUGS - Sometimes a viewer (gv) tries to read an updated .ps or .pdf file after - its creation is started but before the file is complete. Work around: - manually refresh (or reopen) display. Or use one of the other preview- - ers and update methods. + 30 September 2008 25 - (The following isn't really a bug, but concerns features of preview- - ers.) Preview continuous mode only works perfectly with certain pre- - viewers: Xdvi on UNIX/LINUX works for dvi files. Gv on UNIX/LINUX - 28 September 2008 25 +LATEXMK(1L) LATEXMK(1L) + This method still works, and is equivalent to the earlier code using + the add_cus_dep subroutine, except that it doesn't delete any previous + custom-dependency for the same conversion. So the new method is + preferable. -LATEXMK(1L) LATEXMK(1L) +[1mSEE ALSO[0m + latex(1), bibtex(1). +[1mBUGS[0m + Sometimes a viewer (gv) tries to read an updated .ps or .pdf file after + its creation is started but before the file is complete. Work around: + manually refresh (or reopen) display. Or use one of the other preview- + ers and update methods. - works for both postscript and pdf. Ghostview on UNIX/LINUX needs a - manual update (reopen); it views postscript and pdf. Gsview under MS- - Windows works for both postscript and pdf, but only reads the updated - file when its screen is refreshed. Acroread under UNIX/LINUX views - pdf, but the file needs to be closed and reopened to view an updated - version. Under MS-Windows, acroread locks its input file and so the - pdf file cannot be updated. (Remedy: configure latexmk to use gsview + (The following isn't really a bug, but concerns features of preview- + ers.) Preview continuous mode only works perfectly with certain pre- + viewers: Xdvi on UNIX/LINUX works for dvi files. Gv on UNIX/LINUX + works for both postscript and pdf. Ghostview on UNIX/LINUX needs a + manual update (reopen); it views postscript and pdf. Gsview under MS- + Windows works for both postscript and pdf, but only reads the updated + file when its screen is refreshed. Acroread under UNIX/LINUX views + pdf, but the file needs to be closed and reopened to view an updated + version. Under MS-Windows, acroread locks its input file and so the + pdf file cannot be updated. (Remedy: configure [4mlatexmk[24m to use gsview instead.) -THANKS TO - Authors of previous versions. Many users with their feedback, and - especially David Coppit (username david at node coppit.org) who made - many useful suggestions that contributed to version 3, and Herbert - Schulz. (Please note that the e-mail addresses are not written in +[1mTHANKS TO[0m + Authors of previous versions. Many users with their feedback, and + especially David Coppit (username david at node coppit.org) who made + many useful suggestions that contributed to version 3, and Herbert + Schulz. (Please note that the e-mail addresses are not written in their standard form to avoid being harvested by worms and viruses.) -AUTHOR - Current version, by John Collins (username collins at node - phys.psu.edu). (Version 4.01). +[1mAUTHOR[0m + Current version, by John Collins (username collins at node + phys.psu.edu). (Version 4.01a). - It can be obtained from CTAN: <http://www.tug.org/tex-archive/sup- - port/latexmk/>, and from the author's website - <http://www.phys.psu.edu/~collins/software/latexmk/>. + Released version (last was 4.01) can be obtained from CTAN: + <http://www.tug.org/tex-archive/support/latexmk/>, and from the + author's website <http://www.phys.psu.edu/~collins/software/latexmk/>. Modifications and enhancements by Evan McLean (Version 2.0) Original script called "go" by David J. Musliner (RCS Version 3.2) @@ -1749,24 +1762,6 @@ AUTHOR - - - - - - - - - - - - - - - - - - - 28 September 2008 26 + 30 September 2008 26 diff --git a/Master/texmf-dist/scripts/latexmk/latexmk.pl b/Master/texmf-dist/scripts/latexmk/latexmk.pl index 4d124a67893..acadd33c844 100755 --- a/Master/texmf-dist/scripts/latexmk/latexmk.pl +++ b/Master/texmf-dist/scripts/latexmk/latexmk.pl @@ -45,6 +45,12 @@ if 0; ## ?? Need to set dependence of extra bibtex rules on .bib file ## ?? Put $pass as variable in rule. +## ?? Issues with clean-up +## List of aux files deleted is those read, not those generated. +## Other files are generated by (pdf)latex; should they be deleted? +## (I have hooks for this). + + #======================================= @@ -142,8 +148,8 @@ if 0; $my_name = 'latexmk'; $My_name = 'Latexmk'; -$version_num = '4.01'; -$version_details = "$My_name, John Collins, 24 September 2008"; +$version_num = '4.02'; +$version_details = "$My_name, John Collins, 15 November 2008"; use Config; @@ -210,8 +216,34 @@ else { ## 5. Parsing of log file instead of source file is used to ## obtain dependencies, by default. ## -## Modification log for 28 Mar 2007 onwards in detail +## Modification log for 24 Sep 2008 onwards in detail ## +## 15 Nov 2008, John Collins Make version # 4.02, for release +## 12 Nov 2008, John Collins Deal with quoted filenames in log file +## (as with MikTeX) +## 10 Nov 2008, John Collins Start fixing bug about -ps -pdfps +## running ps2pdf before dvips +## 30 Sep 2008, John Collins V. 4.01a +## Correct problem that aux files not of +## same basename are not deleted on clean-up +## Primary problem: fdb file was deleted before +## being read +## ?? Remaining issues on this: +## List of aux files deleted is those read, +## not those generated +## Other files are generated by (pdf)latex +## should they be deleted? +## Solution of problem that if a source file +## for (pdf)latex disappears, that is treated +## as a change requiring a rerun. This gives +## an infinite loop of unnecessary runs in +## -pvc mode +## Cleanup can also apply to all files +## generated during (pdf)latex run, +## as diagnosed by \openout lines, +## and also to files generated from +## these. Controlling variable +## $cleanup_includes_generated. ## 24 Sep 2008, John Collins Release version 4.01. ## ## 1998-2008, John Collins. Many improvements and fixes. @@ -840,6 +872,9 @@ $cleanup_mode = 0; # No cleanup of nonessential LaTex-related files. # dviF, pdf, ps, & psF $cleanup_fdb = 0; # No removal of file for latexmk's file-database $cleanup_only = 0; # When doing cleanup, do not go-on to making files +$cleanup_includes_generated = 0; + # Determines whether cleanup deletes files generated by + # (pdf)latex (found from \openout lines in log file). $diagnostics = 0; $dvi_filter = ''; # DVI filter command $ps_filter = ''; # Postscript filter command @@ -1446,16 +1481,25 @@ if ( ! ( $dvi_mode || $pdf_mode || $postscript_mode || $printout_mode) ) { # Set new-style requested rules: if ( $dvi_mode ) { $requested_filerules{'latex'} = 1; } if ( $pdf_mode == 1 ) { $requested_filerules{'pdflatex'} = 1; } -elsif ( $pdf_mode == 2 ) { $requested_filerules{'ps2pdf'} = 1; } -elsif ( $pdf_mode == 3 ) { $requested_filerules{'dvipdf'} = 1; } -if ( $postscript_mode ) { $requested_filerules{'dvips'} = 1; } +elsif ( $pdf_mode == 2 ) { + $requested_filerules{'latex'} = 1; + $requested_filerules{'dvips'} = 1; + $requested_filerules{'ps2pdf'} = 1; +} +elsif ( $pdf_mode == 3 ) { + $requested_filerules{'latex'} = 1; + $requested_filerules{'dvipdf'} = 1; +} +if ( $postscript_mode ) { + $requested_filerules{'latex'} = 1; + $requested_filerules{'dvips'} = 1; +} if ( $printout_mode ) { $one_time{'print'} = 1; } if ( $preview_continuous_mode || $preview_mode ) { $one_time{'view'} = 1; } if ( length($dvi_filter) != 0 ) { $requested_filerules{'dvi_filter'} = 1; } if ( length($ps_filter) != 0 ) { $requested_filerules{'ps_filter'} = 1; } if ( $banner ) { $requested_filerules{'dvips'} = 1; } - %possible_primaries = (); foreach (&rdb_possible_primaries) { $possible_primaries{$_} = 1; @@ -1539,31 +1583,55 @@ foreach $filename ( @file_list ) $fdb_file = "$root_filename.$fdb_ext"; - if ($cleanup_fdb) { unlink $fdb_file; } if ( $cleanup_mode > 0 ) { - my @extra_generated = (); + # Use parse_logB to get names of generated files. + # It returns its results in the following variables: + local %dependents = (); # Maps files to status + local @bbl_files = (); + local %idx_files = (); # Maps idx_file to (ind_file, base) + local %generated_log = (); # Lists generated files + print "$My_name: Examining log file for generated files...\n"; + &parse_logB; + + my @index_bibtex_generated = (); my @aux_files = (); - rdb_read_generatedB( $fdb_file, \@extra_generated, \@aux_files ); + my %other_generated = %generated_log; + + rdb_read_generatedB( $fdb_file, \@index_bibtex_generated, \@aux_files, + \%other_generated ); if ( ($go_mode == 2) && !$silent ) { warn "$My_name: Removing all generated files\n" unless $silent; } + foreach (@index_bibtex_generated, @aux_files) { + delete( $other_generated{$_} ); + } if ($diagnostics) { - show_array( "For deletion:\n Extra_generated:", @extra_generated ); + show_array( "For deletion:\n" + ." Generated (from makeindex and bibtex):", + @index_bibtex_generated ); show_array( " Aux files:", @aux_files ); + show_array( "Other generated files:\n" + ." (only deleted if \$cleanup_includes_generated is set): ", + keys %other_generated ); } + # Add to the generated files, some log file and some backup # files used in previous versions of latexmk &cleanup1( 'blg', 'ilg', 'log', 'aux.bak', 'idx.bak', split(' ',$clean_ext), @generated_exts ); - unlink( 'texput.log', @extra_generated, "texput.aux", @aux_files ); + unlink( 'texput.log', @index_bibtex_generated, "texput.aux", @aux_files ); + if ($cleanup_includes_generated) { + unlink( keys %other_generated ); + } if ( $cleanup_mode == 1 ) { &cleanup1( 'dvi', 'dviF', 'ps', 'psF', 'pdf', split(' ', $clean_full_ext) ); } } + if ($cleanup_fdb) { unlink $fdb_file; } if ($cleanup_only) { next FILE; } # Initialize file and rule databases. @@ -2666,6 +2734,8 @@ sub parse_logB { # Treat the following specially, since they have special rules # @bbl_files to list of .bbl files. # %idx_files to map from .idx files to .ind files. +# %generated_log: keys give set of files written by (pdf)latex (e.g., aux, idx) +# as determined by \openout = ... lines in log file. # Also set # $reference_changed, $bad_reference, $bad_citation # Trivial or default values if log file does not exist/cannot be opened @@ -2686,6 +2756,7 @@ sub parse_logB { foreach (@default_includes) { $dependents{$_} = 4; } @bbl_files = (); %idx_files = (); # Maps idx_file to (ind_file, base) + %generated_log = (); $reference_changed = 0; $bad_reference = 0; @@ -2760,6 +2831,10 @@ LINE: # Latex error/warning, etc. next LINE; } + if ( /^\\openout\d+\s*=\s*\`([^\']+)\'\.$/ ) { + $generated_log{$1} = 1; + next LINE; + } # Test for writing of index file. The precise format of the message # depends on which package (makeidx.sty , multind.sty or index.sty) and # which version writes the message. @@ -2895,19 +2970,22 @@ LINE: # First step: replace $_ by whole of line after the '(' # Thus $_ is putative filename followed by other stuff. $_ = $1; - if ( /^([^\(^\)^\{]*?)\s\[/ ) { + if ( /^\"([^\(^\)^\"]+)\"/ ) { + # Quoted file name, as from MikTeX + } + elsif ( /^([^\(^\)]*?)\s\[/ ) { # Terminator: space then '[' # Use *? in condition: to pick up first ' [' as terminator # 'file [' should give good filename. } - elsif ( /^([^\(^\)^\{]*)\s(?=\()/ ) { + elsif ( /^([^\(^\)]*)\s(?=\()/ ) { # Terminator is ' (', but '(' isn't in matched string, # so we keep the '(' ready for the next match } - elsif ( /^([^\(^\)^\{]*)(\))/ ) { + elsif ( /^([^\(^\)]*)(\))/ ) { # Terminator is ')' } - elsif ( /^([^\(^\)^\{]*?)\s*\{/ ) { + elsif ( /^([^\(^\)]*?)\s*\{/ ) { # Terminator: arbitrary space then '{' # Use *? in condition: to pick up first ' [' as terminator # 'file [' should give good filename. @@ -2926,6 +3004,10 @@ LINE: # Part of font message next INCLUDE_CANDIDATE; } + # Remove quotes around filename, as for MikTeX. I've already + # treated this as a special case. For safety check here: + $include_candidate =~ s/^\"(.*)\"$/$1/; + # Make list of new include files; sometimes more than one. my @new_includes = ($include_candidate); if ( $include_candidate =~ /^(.+)\[([^\]]+)\]$/ ) { @@ -3053,6 +3135,11 @@ CANDIDATE: print "Apparent input files appearently from misunderstood lines in .log file:\n"; foreach ( @misparse ) { print " $_\n"; } } + print "Log file shows the following generated files: "; + foreach (keys %generated_log) { + print "'$_' "; + } + print "\n"; } return 1; @@ -3364,13 +3451,20 @@ LINE: #************************************************************ sub rdb_read_generatedB { - # Call: rdb_read_generatedB( $in_name, \@extra_generated, \@aux_files ) + # Call: rdb_read_generatedB( $in_name, \@generated1, \@aux_files. + # \%other_generated ) # From rule database in saved file, in format written by rdb_write, - # finds the non-basic generated files that are to be deleted by a cleanup. - # Returns an array of these files, or an empty array if the file - # does not exist or cannot be opened. - my ($in_name, $Pgenerated, $Paux_files) = @_; - @$Pgenerated = (); + # finds the non-trivial generated files that are to be deleted by a cleanup. + # On entry: + # Keys of %other_generated: any detected generated files, from \openout + # lines log file, usually. + # At exit: + # Array @generated1: files associated with makeindex and bibtex + # Array @aux_files: aux files + # Added to keys of %other_generated: any files that are destinations of rules + # whose source is in %other_generated. (One stage only.) + my ($in_name, $Pgenerated1, $Paux_files, $Pother_generated) = @_; + @$Pgenerated1 = (); @$Paux_files = (); my $in_handle = new FileHandle; @@ -3384,6 +3478,7 @@ sub rdb_read_generatedB { my $ext = ''; my $path = ''; my $state = 0; # Outside a section + my @other_additions = (); LINE: while ( <$in_handle> ) { # Remove leading and trailing white space. @@ -3405,12 +3500,15 @@ LINE: } else { next LINE; } if ( $rule =~ /^makeindex/ ) { - push @$Pgenerated, $source, $dest, "$base.ilg"; + push @$Pgenerated1, $source, $dest, "$base.ilg"; } elsif ( $rule =~ /^bibtex/ ) { - push @$Pgenerated, $dest, "$base.blg"; + push @$Pgenerated1, $dest, "$base.blg"; push @$Paux_files, $source; } + elsif ( exists ${$Pother_generated}{$source} ) { + push @other_additions, $dest; + } $state = 1; #Reading a section } elsif ( /^\"([^\"]*)\"\s+(\S+)\s+(\S+)\s+(\S+)\s+\"([^\"]*)\"/ ) { @@ -3433,7 +3531,9 @@ LINE: } } # LINE undef $in_handle; - + foreach (@other_additions) { + ${$Pother_generated}{$_} = 1; + } } # END rdb_read_generatedB #************************************************************ @@ -3496,9 +3596,10 @@ sub rdb_set_from_logB { # Parse log file to find relevant filenames # Result in the following variables: - local %dependents = (); # Maps files to status + local %dependents = (); # Maps files to status local @bbl_files = (); - local %idx_files = (); # Maps idx_file to (ind_file, base) + local %idx_files = (); # Maps idx_file to (ind_file, base) + local %generated_log = (); # Lists generated files found in log file # The following are also returned, but are global, to be used by caller # $reference_changed, $bad_reference $bad_citation @@ -4100,6 +4201,7 @@ sub rdb_makeB { print "MakeB: doing pre_primary and primary...\n"; } rdb_for_some( [@pre_primary, $primary], \&rdb_makeB1 ); + if ( ($runs > 0) && ! $too_many_runs ) { $retry_msg = 0; if ( $failure && $newrule_nofile ) { @@ -4607,12 +4709,19 @@ sub rdb_file_change1 { #?? " New $new_time, $new_size, $new_md5\n"; my $ext = ext( $file ); if ( ($new_size < 0) && ($$Psize >= 0) ) { - print "Disappeared '$file' in '$rule'\n"; + # print "Disappeared '$file' in '$rule'\n"; push @disappeared, $file; # No reaction is good. #$$Pout_of_date = 1; # ??? 1 Sep. 2008: I do NOT think so, for cusdep no-file-exists issue - $$Pout_of_date = 1; + # ??? 30 Sep 2008: I think I have this fixed. There were other changes + # needed. No-change-flagged is correct. The array @disappeared flags + # files that have disappeared, if I need to know. But having a source + # file disappear is not a reason for a remake unless I know how to + # make the file. If the file is a destination of a rule, that rule + # will be rerun. It may be that the user is changing another source + # in such a way that the disappeared file won't be needed. Before the + # change is applied we get a superfluous infinite loop. return; } if ( ($new_size < 0) && ($$Psize < 0) ) { @@ -4639,7 +4748,7 @@ sub rdb_file_change1 { #************************************************************ sub rdb_count_changes { - return $#changed + $#disappeared + $#no_dest + $#rules_to_apply + 4; + return $#changed + $#no_dest + $#rules_to_apply + 3; } #END rdb_count_changes #************************************************************ |