5 files changed, 96 insertions, 37 deletions
diff --git a/Master/texmf-dist/doc/latex/imakeidx/README b/Master/texmf-dist/doc/latex/imakeidx/README
index accd3a2ebf7..e06f3498f73 100644
--- a/Master/texmf-dist/doc/latex/imakeidx/README
+++ b/Master/texmf-dist/doc/latex/imakeidx/README
@@ -1,5 +1,5 @@
 This is the README file relative to package imakeidx version 1.3
-dated 26 March 2013.
+dated 2 July 2013.
 
 Copyright 2010-2013 by Claudio Beccari and Enrico Gregorio
 
@@ -40,12 +40,19 @@ run within a TeX run;  with previous distributions the shell escape
 feature  had to be  explicitly  enabled.   With the 2010  and later 
 distributions the makeindex program is directly accessible.  If the 
 xindy program  is used  to sort index entries  and format the index 
-files, it is still necessary to use the shell escape option.
+files, it is still necessary to use the full shell escape option.
 
 This bundle is compatible with most existing classes; some reported 
 conflicts  with other  packages  have been  reported  and have been 
 resolved,  or  at  least  advice is given  so as  to overcome  such 
 conflicts.
 
+This 1.3 version  has hooks  that can be used by  class and package 
+writers in order to index some entries with reference with location 
+counters other than the page one,  for example line numbers,  verse
+numbers, etc.  This extension  was contributed  by Maieul Roquette, 
+the author  and maintainer  of package  eledmac.Roquette.   We very 
+gratefully acknowledge his contribution.
+
 Claudio Beccari       claudio dot beccari at gmail.com
 Enrico Gregorio       enrico dot gregorio at univr.it
diff --git a/Master/texmf-dist/doc/latex/imakeidx/imakeidx.pdf b/Master/texmf-dist/doc/latex/imakeidx/imakeidx.pdf
index dbd0ca37b12..e51e077985f 100644
--- a/Master/texmf-dist/doc/latex/imakeidx/imakeidx.pdf
+++ b/Master/texmf-dist/doc/latex/imakeidx/imakeidx.pdf
diff --git a/Master/texmf-dist/doc/latex/imakeidx/manifest.txt b/Master/texmf-dist/doc/latex/imakeidx/manifest.txt
index 55ce4004f6b..5a08faacf08 100644
--- a/Master/texmf-dist/doc/latex/imakeidx/manifest.txt
+++ b/Master/texmf-dist/doc/latex/imakeidx/manifest.txt
@@ -1,5 +1,5 @@
                    The imakeidx extension package
-                  version 1.2 of 26 March 2013
+                    version 1.3 of 02 July 2013
                   
 Copyright 2010-2013 by Claudio Beccari and Enrico Gregorio
 
diff --git a/Master/texmf-dist/source/latex/imakeidx/imakeidx.dtx b/Master/texmf-dist/source/latex/imakeidx/imakeidx.dtx
index 12320d3a96d..d47eac29ec8 100644
--- a/Master/texmf-dist/source/latex/imakeidx/imakeidx.dtx
+++ b/Master/texmf-dist/source/latex/imakeidx/imakeidx.dtx
@@ -55,6 +55,7 @@ and the derived files imakeidx.sty and imakeidx.pdf.
 \def\class#1{\textsf{\itshape#1}}
 \def\opz#1{\texttt{#1}}
 \usepackage{multicol}
+\usepackage[colorlinks]{hyperref}
 \usepackage[T1]{fontenc}
 \usepackage[utf8]{inputenc}
 \usepackage[english]{babel}
@@ -78,7 +79,7 @@ and the derived files imakeidx.sty and imakeidx.pdf.
 \end{document}
 %</driver>
 % \fi
-% \CheckSum{785}
+% \CheckSum{797}
 %
 % \changes{v1.0}{2010/07/10}{First public version}
 % \changes{v1.0a}{2010/07/12}{Small bug correction}
@@ -91,6 +92,8 @@ and the derived files imakeidx.sty and imakeidx.pdf.
 % \changes{v1.2c}{2012/10/02}{Fixed regression}
 % \changes{v1.2d}{2012/10/06}{Fixed bugs with index internal names}
 % \changes{v1.2e}{2012/10/22}{Fixed bug with showidx simulated by memoir}
+% \changes{v1.3}{2013/03/26 }{Added internal so as to cooperate in a better
+% way with eledmac (by Maieul Roquette}
 %
 % \begin{abstract}
 % This package exploits the |\write18| facility of modern \TeX\ system
@@ -735,20 +738,21 @@ and the derived files imakeidx.sty and imakeidx.pdf.
 % disabled.
 
 % When you make any kind of customization, remember that there are
-% several class or personal settings or features that may render your
-% customization very difficult to handle.
-%
-% Remember that:
+% several classes, or personal settings, or features that may render your
+% customization very difficult to handle. Typically:
+%^^A
 %\begin{itemize}
 % \item There are classes where the normal usable highest sectioning
 % command, disregarding |\part|, is not |\chapter|, but |\section|; for
-% example class \class{article}, \class{scrartcl}.
+% example classes \class{article}, \class{scrartcl}.
+%^^A
 %\item Sectioning commands come in two varieties: starred and unstarred;
 % the former ones are not numbered and do not produce any entry in the
 % headings and in the table of contents; the latter ones may  behave
-% differently according to the next list entry.
+% differently according to the next item.
+%^^A
 % \item There are some classes (for example \class{book},
-% \class{scrapbook}, \class{menoir},\dots) that have the special
+% \class{scrbook}, \class{menoir},\dots) that have the special
 % ``sectioning'' declarations |\frontmatter|, |\mainmatter|, and
 % |\backmatter| modify how the unstarred sectioning commands behave for
 % what concerns the heading and the table of contents entries.
@@ -757,42 +761,45 @@ and the derived files imakeidx.sty and imakeidx.pdf.
 % end. This means that the |\backmatter| declaration may be in force;
 % in this case unstarred sectioning commands are not numbered but they
 % produce normal headings and table of contents entries.
+%^^A
 %\item Heading entries are used by the output routine paging algorithm
 % in such a way as to extract the left or the right part from suitable
 % ``marks''; for the even (left) pages the required information is
 % extracted from the |\topmark| or |\firstmark|, while for the odd (right)
 % pages they are extracted from the |\botmark|. Generally speaking,
 % the even page heading refers to |\leftmark| and odd page headings
-% refer to |\rightmarkk|; there are the two commands that extract the
+% refer to |\rightmark|; these are the two commands that extract the
 % correct part from the suitable marks. But when you use the
-% \Kvalue{headers} value you specify two brace balanced strings that
+% \Kvalue{headers} option value, you specify two brace balanced strings that
 % are loaded through |\markboth| as the left and right part of the
 % current mark.
+%^^A
 % \item The contents of the marks may be very varied; they are generally
 % made up of two brace balanced strings, which in turn may contain other
-% brace balanced stings that may be used in different ways by the selected page
+% brace balanced strings that may be used in different ways by the selected page
 % style and by the page style definitions of the macros |\chaptermarks|,
 % |\sectionmarks|, and |\subsectionmarks| that may interfere with personal
 % customizations.
+%^^A
 % \item Remember also that things change in an obvious way when one side
-% typesetting is chosen; all a pages are treated as if they were odd ones;
+% typesetting is chosen; all pages are treated as if they were odd ones;
 % therefore any customization must take into account also this aspect.
 %\end{itemize}
 %
 % The above list has not been written down for discouraging customizations
-% of any kind: simply it recall what mast be taken care of in order to
+% of any kind: simply it recalls what must be taken care of in order to
 % create one's customization in a proper way.
 %
 % The above list explains why we disabled the commands tied to the
 % |\indexsetup| keys \Kvalue{headings} and \Kvalue{firstpagestyle} when
 % package \pack{fancydr} is being used; you may even set up these keys,
-% but if the \pack{fancyhdr} package has been load, we disable their
+% but if the \pack{fancyhdr} package has been loaded, we disable their
 % action; this implies that any fancy customization must be done before
 % starting to print any index.
 %
-% The \Kvalue{intoc} must also be used with care, as well as the starred
+% The \Kvalue{intoc} option must also be used with care, as well as the starred
 % or unstarred sectioning commands for the \Kvalue{level} and
-% \Kvalue{toclevel} values. They must be chosen according to what the
+% \Kvalue{toclevel} option values. They must be chosen according to what the
 % possible |\backmatter| declaration sets up, in order to avoid double
 % entries in the table of contents; the |\backmatter| settings may also
 % influence the way heading information is being used, and this makes it
@@ -803,7 +810,7 @@ and the derived files imakeidx.sty and imakeidx.pdf.
 % eliminate the \Kvalue{intoc} option from your calls; your class,
 % packages, and settings are already taking care of it. 
 
-% The package \pack{tocbibind} should be loaded with the \texttt{noindex}
+% The package \pack{tocbibind} should be loaded with the \Kvalue{noindex}
 % option, otherwise it would interfere with our redefinition of
 % \texttt{theindex}.
 %
@@ -818,6 +825,29 @@ and the derived files imakeidx.sty and imakeidx.pdf.
 % link anchors needed to navigate your document by means of hyper
 % links.
 %
+% \subsection{Index location customization}
+%
+% Some packages might want to use the facilities of \emph{imakeidx} to offer customized 
+% index commands, where the entry location is not expressed by a page number, 
+% but by an other reference value (for example: line number, entry number, etc.).
+%
+% These packages may use the low-level command \cs{imki@wrindexentry} which takes three arguments:
+% \begin{enumerate}
+% 	\item The index name.
+% 	\item The entry.
+% 	\item The location number.
+% \end{enumerate}
+% For example \verb+\imki@wrindexentry{names}{Charles}{26}+ adds to the index \verb+names+
+% the value \verb+Charles+ with the location reference \verb+26+.
+%
+% In simpler words, the new command \cs{imki@wrindexentry} is of interest mainly to package
+% and class authors; it is not to be used by the ``normal'' user, who, on the opposite,
+% if interested in referencing the index entries on some location counter different
+% from the page one, is urged to refer to the classes and packages that implement this
+% facility; \pack{eledmac} should be one of these packages. Matter of fact this addition
+% to the \pack{imakeidx} package was contributed by Maïeul Roquette, the author
+% and maintainer of \pack{eledmac}, and we thank him very much,
+%
 % \subsection{Using the \textsf{showidx} package}
 % If you want to make use of the \pack{showidx} facilities, remember
 % to load that package \emph{before} \pack{imakeidx}; remember also
@@ -827,7 +857,7 @@ and the derived files imakeidx.sty and imakeidx.pdf.
 % some of which have to receive the \pack{imakeidx} definition in order
 % to perform as described in this documentation.
 
-% At the same time if the \pack{memoir} classis being used, remember that this class
+% At the same time if the \pack{memoir} class is being used, remember that this class
 % simulates the \pack{showidx} package and has its own commands to enable or
 % disable the printing of the index entries into the margin of the document;
 % the default setting is with the |\hideindexmarks| command in force; but if
@@ -1188,6 +1218,8 @@ and the derived files imakeidx.sty and imakeidx.pdf.
 % defining it twice; then we use it to let the \pack{showidx} true or simulated macros do
 % their job, but we also take care of resetting the switch default value to
 % false at begin document time if the \pack{memoir} class is being used. 
+%
+%
 %    \begin{macrocode}
 \@ifundefined{showindexmarks}{\newif\ifshowindexmark}{}
 \@ifpackageloaded{showidx}{\showindexmarktrue}{\showindexmarkfalse}
@@ -1195,16 +1227,24 @@ and the derived files imakeidx.sty and imakeidx.pdf.
   \ifshowindexmark
     \@showidx{\ifdefequal{\imki@jobname}{#1}{}{[#1]\space}#2}%
   \fi}
-\def\imki@wrindexsplit#1#2{%
+\newcommand\imki@wrindexentrysplit[3]{%
   \expandafter\protected@write\csname#1@idxfile\endcsname{}%
-    {\string\indexentry{#2}{\thepage}}%
-  \endgroup\imki@showidxentry{#1}{#2}%
-  \@esphack}
-\def\imki@wrindexunique#1#2{%
+    {\string\indexentry{#2}{#3}}%
+}
+\newcommand\imki@wrindexentryunique[3]{%
   \protected@write\@indexfile{}%
-    {\string\indexentry[#1]{#2}{\thepage}}%
-  \endgroup\imki@showidxentry{#1}{#2}%
-  \@esphack}
+    {\string\indexentry[#1]{#2}{#3}}%
+}
+\def\imki@wrindexsplit#1#2{%
+	\imki@wrindexentrysplit{#1}{#2}{\thepage}%
+	\endgroup\imki@showidxentry{#1}{#2}%
+  \@esphack%
+}
+\def\imki@wrindexunique#1#2{%
+	\imki@wrindexentryunique{#1}{#2}{\thepage}%
+	\endgroup\imki@showidxentry{#1}{#2}%
+  \@esphack%
+  }
 %    \end{macrocode}
 %
 % ^^A E - \printindex
@@ -1494,6 +1534,7 @@ and the derived files imakeidx.sty and imakeidx.pdf.
   \let\imki@startidx\imki@startidxunique
   \let\@wrindex\imki@wrindexunique
   \let\imki@putindex\imki@putindexunique
+  \let\imki@wrindexentry\imki@wrindexentryunique
   \let\imki@startidxsplit\@undefined
   \let\imki@wrindexsplit\@undefined
   \let\imki@putindexsplit\@undefined
@@ -1501,6 +1542,7 @@ and the derived files imakeidx.sty and imakeidx.pdf.
   \let\imki@startidx\imki@startidxsplit
   \let\@wrindex\imki@wrindexsplit
   \let\imki@putindex\imki@putindexsplit
+  \let\imki@wrindexentry\imki@wrindexentrysplit
   \let\imki@startidxunique\@undefined
   \let\imki@wrindexunique\@undefined
   \let\imki@putindexunique\@undefined
diff --git a/Master/texmf-dist/tex/latex/imakeidx/imakeidx.sty b/Master/texmf-dist/tex/latex/imakeidx/imakeidx.sty
index 1cc0053bc1c..2826591476f 100644
--- a/Master/texmf-dist/tex/latex/imakeidx/imakeidx.sty
+++ b/Master/texmf-dist/tex/latex/imakeidx/imakeidx.sty
@@ -176,16 +176,24 @@
   \ifshowindexmark
     \@showidx{\ifdefequal{\imki@jobname}{#1}{}{[#1]\space}#2}%
   \fi}
-\def\imki@wrindexsplit#1#2{%
+\newcommand\imki@wrindexentrysplit[3]{%
   \expandafter\protected@write\csname#1@idxfile\endcsname{}%
-    {\string\indexentry{#2}{\thepage}}%
-  \endgroup\imki@showidxentry{#1}{#2}%
-  \@esphack}
-\def\imki@wrindexunique#1#2{%
+    {\string\indexentry{#2}{#3}}%
+}
+\newcommand\imki@wrindexentryunique[3]{%
   \protected@write\@indexfile{}%
-    {\string\indexentry[#1]{#2}{\thepage}}%
-  \endgroup\imki@showidxentry{#1}{#2}%
-  \@esphack}
+    {\string\indexentry[#1]{#2}{#3}}%
+}
+\def\imki@wrindexsplit#1#2{%
+\imki@wrindexentrysplit{#1}{#2}{\thepage}%
+\endgroup\imki@showidxentry{#1}{#2}%
+  \@esphack%
+}
+\def\imki@wrindexunique#1#2{%
+\imki@wrindexentryunique{#1}{#2}{\thepage}%
+\endgroup\imki@showidxentry{#1}{#2}%
+  \@esphack%
+  }
 \def\imki@shellwarn{}
 \ifdefined\imki@shellescape % luatex
 \else
@@ -375,6 +383,7 @@
   \let\imki@startidx\imki@startidxunique
   \let\@wrindex\imki@wrindexunique
   \let\imki@putindex\imki@putindexunique
+  \let\imki@wrindexentry\imki@wrindexentryunique
   \let\imki@startidxsplit\@undefined
   \let\imki@wrindexsplit\@undefined
   \let\imki@putindexsplit\@undefined
@@ -382,6 +391,7 @@
   \let\imki@startidx\imki@startidxsplit
   \let\@wrindex\imki@wrindexsplit
   \let\imki@putindex\imki@putindexsplit
+  \let\imki@wrindexentry\imki@wrindexentrysplit
   \let\imki@startidxunique\@undefined
   \let\imki@wrindexunique\@undefined
   \let\imki@putindexunique\@undefined