summaryrefslogtreecommitdiff
path: root/Master/texmf-dist
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist')
-rw-r--r--Master/texmf-dist/doc/xetex/xetexref/Makefile4147
-rw-r--r--Master/texmf-dist/doc/xetex/xetexref/Makefile.ini2
-rw-r--r--Master/texmf-dist/doc/xetex/xetexref/README10
-rw-r--r--Master/texmf-dist/doc/xetex/xetexref/xetex-reference.pdfbin127525 -> 143906 bytes
-rw-r--r--Master/texmf-dist/doc/xetex/xetexref/xetex-reference.tex74
5 files changed, 74 insertions, 4159 deletions
diff --git a/Master/texmf-dist/doc/xetex/xetexref/Makefile b/Master/texmf-dist/doc/xetex/xetexref/Makefile
deleted file mode 100644
index fe48e923157..00000000000
--- a/Master/texmf-dist/doc/xetex/xetexref/Makefile
+++ /dev/null
@@ -1,4147 +0,0 @@
-# Copyright 2004 Chris Monson (shiblon@gmail.com)
-# Latest version available at http://www.bouncingchairs.net/oss
-#
-# This file is part of ``Chris Monson's Free Software''.
-#
-# ``Chris Monson's Free Software'' is free software; you can redistribute it
-# and/or modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation, Version 2.
-#
-# ``Chris Monson's Free Software'' is distributed in the hope that it will
-# be useful, but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General
-# Public License for more details.
-#
-# You should have received a copy of the GNU General Public License along
-# with ``Chris Monson's Free Software''; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-#
-# It is also available on the web at http://www.gnu.org/copyleft/gpl.html
-#
-# Note that using this makefile to build your documents does NOT place them
-# under the GPL unless you, the author, specifically do so. In other words,
-# I, Chris Monson, the copyright holder and author of this makefile,
-# consider it impossible to ``link'' to this makefile in any way covered by
-# the GPL.
-#
-#
-# TO OBTAIN INSTRUCTIONS FOR USING THIS FILE, RUN:
-# make help
-#
-fileinfo := LaTeX Makefile
-author := Chris Monson
-version := 2.2.1-alpha9
-#
-.DEFAULT_GOAL := all
-# Note that the user-global version is imported *after* the source directory,
-# so that you can use stuff like ?= to get proper override behavior.
-.PHONY: Makefile GNUmakefile Makefile.ini $(HOME)/.latex-makefile/Makefile.ini
--include Makefile.ini
--include $(HOME)/.latex-makefile/Makefile.ini
-# Better names for these things
-.PHONY: Variables.ini $(HOME)/.latex-makefile/Variables.ini
--include Variables.ini
--include $(HOME)/.latex-makefile/Variables.ini
-#
-# This can be pdflatex or latex - you can change this by adding the following line to your Makefile.ini:
-# BUILD_STRATEGY := latex
-BUILD_STRATEGY ?= pdflatex
-# This can be used to pass extra options to latex.
-LATEX_OPTS ?=
-#
-# Sets LC_ALL=C, by default, so that the locale-aware tools, like sort, be
-# # immune to changes to the locale in the user environment.
-export LC_ALL ?= C
-#
-#
-# If you specify sources here, all other files with the same suffix
-# will be treated as if they were _include_ files.
-#onlysources.tex ?= main.tex
-#onlysources.lhs ?=
-#onlysources.tex.sh ?=
-#onlysources.tex.pl ?=
-#onlysources.tex.py ?=
-#onlysources.rst ?=
-#onlysources.mp ?=
-#onlysources.fig ?=
-#onlysources.gpi ?=
-#onlysources.dot ?=
-#onlysources.xvg ?=
-#onlysources.svg ?=
-#onlysources.eps.gz ?=
-#onlysources.eps ?=
-#
-# If you list files here, they will be treated as _include_ files
-#includes.tex ?= file1.tex file2.tex
-#includes.lhs ?=
-#includes.tex.sh ?=
-#includes.tex.pl ?=
-#includes.tex.py ?=
-#includes.rst ?=
-#includes.mp ?=
-#includes.fig ?=
-#includes.gpi ?=
-#includes.dot ?=
-#includes.xvg ?=
-#includes.svg ?=
-#includes.eps.gz ?=
-#includes.eps ?=
-#
-# If you list files or wildcards here, they will *not* be cleaned - default is
-# to allow everything to be cleaned.
-#neverclean ?= *.pdf
-#
-# Alternatively (recommended), you can add those lines to a Makefile.ini file
-# and it will get picked up automatically without your having to edit this
-# Makefile.
-#
-# KNOWN ISSUES:
-# * The following occurs:
-# file with: \usepackage{named}\bibliographystyle{named}
-# Compile
-# change to: \usepackage{apalike}\bibliographystyle{apalike}
-# Compile again -- BARF!
-#
-# The workaround: make clean-nographics; make
-#
-# Note that we may not be able to fix this. LaTeX itself barfs
-# on this, not the makefile. The very first invocation of LaTeX
-# (when something like this has happened) reads the existing .aux
-# file and discovers invalid commands like \citeauthoryear that
-# are only valid in the package that was just removed. It then
-# tries to parse them and explodes. It's not at all clear to me
-# how to fix this. I tried removing the .aux files on the first
-# run of LaTeX, but that necessarily requires more subsequent
-# rebuilds on common edits. There does not appear to be a
-# graceful solution to this issue.
-#
-#
-# CHANGES:
-# Chris Monson (2012-06-25):
-# * Bumped version to 2.2.1-alpha9
-# * Built with Holger Dell's changes to fix multiple unnecessary compilations.
-# Chris Monson (2011-11-10):
-# * Issue 144: Help patch from girard.nicolas applied
-# Andrew McNabb (2011-09-30):
-# * Bumped version to 2.2.1-alpha8
-# * Issue 141: No font embedding for gnuplot when not doing pdf
-# * Syntax error fixed for gpi handling code
-# Chris Monson (2011-09-06):
-# * Issue 140: clean mlt*, mlf*, and mtc* files
-# * Issue 136: initial support for metapost files
-# Chris Monson (2011-08-09):
-# * Bumped version to 2.2.1-alpha7
-# * Issue 138: existing .eps files now included correctly
-# * Issue 139: added missing backslash to ps build rule
-# Chris Monson (2011-07-20):
-# * Added LATEX_OPTS
-# Chris Monson (2011-06-23):
-# * Bumped version to 2.2.1-alpha6
-# * Issue 133: Set jobname to fix .fls generation to always have the source name
-# * Removed unnecessary (?) double-invocation of cygpath
-# Chris Monson (2011-06-16):
-# * Added support for keeping .rst and .lhs tex intermediates around.
-# * Separated scripts from source generation files (rst and lhs)
-# * Fixed run-script problem for lhs2tex (was invoked incorrectly)
-# * Issue 133: Fixed typo from literate Haskell support
-# Chris Monson (2011-06-13):
-# * Bumped version to 2.2.1-alpha5
-# * Fixed problems with detecting graphics for very long source names.
-# Chris Monson (2011-06-13):
-# * Issue 134: name of self corrected for dependency graph
-# * Issue 133: Added literate Haskell support (lhs2tex)
-# Chris Monson (2011-05-31):
-# * Rewrote specials (%%COMMENTS) to be easier to extend and parse.
-# Chris Monson (2011-05-11):
-# * Bumped version to 2.2.1-alpha4
-# * Issue 129: nomenclature dependency fix
-# Chris Monson (2011-05-09):
-# * Bumped version to 2.2.1-alpha3
-# * Issue 112: Cygpath fixes
-# Chris Monson (2011-04-27):
-# * Bumped version to 2.2.1-alpha2
-# * Issue 126: Broken log parsing for latex pipeline
-# * Fixed month in recent changes (had May, should be April)
-# * Noticed problems with some existing parsing (colorizing errors, notably) and
-# fixed them.
-# * New test case for specified graphic extensions.
-# * Added .bb generation for .eps files (when extensionless in latex pipeline)
-# Chris Monson (2011-04-22):
-# * Bumped version to 2.2.1-alpha1
-# * Issue 105: add support for format file detection and compilation
-# Chris Monson (2011-04-20):
-# * Bumped version to 2.2.0 (release!)
-# Chris Monson (2011-04-19):
-# * Bumped version to 2.2.0-rc15
-# * Issue 125: infinite recursion with nomenclature files
-# * Issue 125: removed .d as a target for .nls in get-log-index
-# * Cleaned up invocation of run-makeindex to take an optional .ist instead of flags.
-# Chris Monson (2011-04-06):
-# * Bumped version to 2.2.0-rc14
-# * Issue 121: Added Targets.ini and corresponding help text for it.
-# * Issue 121: Added Variables.ini (Makefile.ini still works, though).
-# * Issue 121: Added .DEFAULT_GOAL optional setting.
-# * Issue 120: xindy compatibility
-# Chris Monson (2011-03-16):
-# * Bumped version to 2.2.0-rc13
-# * Fixed a bug in kspewhich invocation - random characters and a missing pipe.
-# * Added font embedding to gnuplot output.
-# Chris Monson (2011-03-15):
-# * Bumped version to 2.2.0-rc12
-# * Issue 119: Annoying warning from which if Gnuplot not installed.
-# * Fixed catchall error output to show more info from the log. Cutting off the
-# first line is too jarring.
-# * Issue 118: Better glossary support
-# Chris Monson (2011-03-03):
-# * Bumped version to 2.2.0-rc11
-# * Issue 112: Fixed regression introduced by use of cygpath (ugly warnings)
-# Chris Monson (2011-02-03):
-# * Bumped version to 2.2.0-rc10
-# * Issue 112: Added path normalization for cygwin systems
-# * Fixed a bug in get-missing-inputs where we weren't specifying target files
-# Chris Monson (2011-01-24):
-# * Issue 111: Added .jpeg as a possible image extension
-# Chris Monson (2011-01-21):
-# * Issue 110: Long filenames not produced correctly in .d file
-# * Fixed problem with unknown control sequence error parsing
-# * Fixed problem with \r in fatal output (was interpreted as LF by echo)
-# * Removed a spurious "hi"
-# Chris Monson (2011-01-14):
-# * Bumped version to 2.2.0-rc8
-# * Issue 107: Removed comment with embedded newline, fixing MinGW on Windows 7.
-# Chris Monson (2011-01-07):
-# * Emit an error if .gpi.d files have dependencies with : in the name
-# Chris Monson (2011-01-05):
-# * Bumped version to 2.2.0-rc7
-# * Issue 106: existing graphic dependencies not generated correctly
-# Chris Monson (2011-01-04):
-# * Issue 106: not cleaning eps log files properly
-# * Issue 106: not rebuilding after creating .pdf graphics from .eps
-# * Issue 94: svg going unnecessarily through eps (can't reproduce)
-# Chris Monson (2010-12-31):
-# * Issue 100: make hanging because of faulty graphics detection (sed bug)
-# * Issue 108: do not ignore fatal errors from pdftex
-# Chris Monson (2010-12-23):
-# * Added gpi_global to gnuplot dependencies so that changes are detected
-# Chris Monson (2010-12-20):
-# * Updated build file to be smarter about Python version detection
-# * Created a bunch of test files and supporting scripts
-# * Issue 72: added apacite capaability (thanks to matkarat)
-# Chris Monson (2010-11-23):
-# * Changed to multi-part makefile build (split out sed scripts)
-# * Added build script and supporting infrastructure
-# * Updated test directory format
-# * Added notes about needed test cases
-# * Changed to use -file-line-error and fixed multiple inclusion/error bugs
-# * Added run_sed.py to allow easy testing of sed scripts outside of make
-# Chris Monson (2010-11-11):
-# * Bumped version to 2.2.0-rc7
-# * issue 92: broken hyperref driver detection fixed
-# * issue 101: Broken inkscape conversion
-# * issue 102: Broken specification of font size for gnuplot pdfcairo
-# * Added KEEP_TEMP so that we can avoid deleting useful temporaries for debugging
-# * Restructured gnuplot code to be easier to follow
-# * Fixed a bug in convert-gpi where we were using $< instead of $1
-# Chris Monson (2010-11-03):
-# * Bumped version to 2.2.0-rc6
-# * issue 96: Fix sed errors when using make variables in substitutions
-# Chris Monson (2010-07-28):
-# * Bumped version to 2.2.0-rc5 (rc4 is broken)
-# * Bail out when we find the use of the import.sty package
-# * Issue 90: Add -z to dvips invocation
-# * Issue 67: Add xelatex support (thanks to Nikolai Prokoschenko for the patch!)
-# * Issue 85: Add warning about make 3.80
-# Chris Monson (2010-06-20):
-# * Bumped version to 2.2.0-rc3
-# * Attempt to fix bug with ! error detection (issue 88)
-# * Added svg->pdf direct support (issue 89)
-# Chris Monson (2010-04-28):
-# * Bumped version to 2.2.0-rc2
-# * Fixed %._show target
-# Chris Monson (2010-04-08):
-# * Bumped version to 2.2.0-rc1
-# * Added back in the rst_style_file stuff that got broken when switching
-# rst -> tex to use the script mechanism
-# Chris Monson (2010-03-23):
-# * Bumped version to 2.2.0-beta8
-# * Work on issue 76: bad backtick escape for some sed versions, failure
-# to clear out the hold buffer when outputting MISSING comment.
-# - Backed out 2>&1 to &> (doesn't work in sh)
-# - Backed out using . to source variables
-# Chris Monson (2010-03-22):
-# * Bumped version to 2.2.0-beta7
-# * Issue 72: Fix latex/bibtex invocation order for annotated bib styles
-# * Fixed informational output to reflect which LaTeX run we're on
-# * Fixed graphic detection to include graphics that are already there in
-# .d files
-# * Tightened up the .d file output to only make .d depend on graphic
-# *source* files. This means that building foo.d no longer
-# builds all of the graphics files on which foo.tex depends.
-# Had to use .SECONDEXPANSION trickery to make it work.
-# * Changed get-graphics to only accept a stem.
-# * Fixed build-once logic for scripted .tex to work better
-# * Made get-inputs sed script more maintainable.
-# * Moved Makefile.ini import up higher.
-# * Changed bare stems to not recursively invoke make
-# * Updated diff output to be more silent everywhere
-# * Added a MISSING comment to the .d file if stuff isn't found - forces
-# removal of .1st.make file, which often forces it to try again.
-# * Fixed broken graphics-target function
-# * Added sleep to .d file generation when stuff is missing - if it
-# builds too fast, make doesn't realize it needs to be reloaded,
-# and thus never discovers some deeper dependencies (especially
-# evident when graphics are included from scripted include
-# files).
-# Chris Monson (2010-03-17):
-# * Bumped version to 2.2.0-beta6
-# * Fixed bareword builds to actually work (requires static patterns)
-# * Fixed colorization to work with new paragraph stuff
-# Chris Monson (2010-03-17):
-# * Bumped version to 2.2.0-beta5
-# * Fixed graphic detection to be much more focused - splits log file
-# into paragraphs before doing pattern matching.
-# * Fixed make foo to work properly (recursively calls make foo.pdf)
-# * Fixed gpi -> pdf generation to not waste time building .eps *after*
-# the pdf already exists.
-# * Changed log copies to include MAKE_RESTARTS as part of the name.
-# * Fixed missing include file detection (also makes use of the paragraph
-# stuff) to detect missing scripted include files.
-# Chris Monson (2010-03-16):
-# * Bumped version to 2.2.0-beta4
-# * issue 70: .pdf not moved out of the way properly on first
-# compilation, resulting in early error detection failure.
-# * issue 74: fixed broken error on missing .aux files: the
-# implementation was masking real errors.
-# Chris Monson (2010-03-15):
-# * Bumped version to 2.2.0-beta3
-# * issue 71: Made the tput dependency optional
-# * issue 73: Made .tex targets not pull in .d files (building them from
-# scripts should not require a .d)
-# * issue 74: Output a much saner error when a .aux file is not produced
-# (e.g., when you are typing "make" without arguments in a
-# directory with included .tex files that are not named with
-# ._include_.)
-# Chris Monson (2010-03-11):
-# * Bumped version to 2.2.0-beta2
-# * Fixed clean-graphics to get rid of intermediate .eps files that may
-# be hanging around
-# * Added an automatic setting to use eps terminals in pdflatex mode for
-# gnuplot if it doesn't understand pdf.
-# * issue 66: Removed grayscale generation via magic suffix. Grayscale
-# generation is now only available via GRAY=1
-# * issue 68: Added explicit handling of LC_ALL for locale-aware tools
-# like "sort"
-# Chris Monson (2010-03-10):
-# * Bumped version to 2.2.0-beta1
-# * Fixed success message to handle output message in different places
-# * Added name of produced file to success message
-# Chris Monson (2010-03-10):
-# * Bumped version to 2.2.0-alpha3
-# * Added meaningful error message for wrong hyperref options
-# * Added meaningful error message for incorrect graphics extensions
-# Chris Monson (2010-03-09):
-# * Bumped version to 2.2.0-alpha2
-# * Updated graphics handling (gnuplot and fig generate pdf natively)
-# * Changed xmgrace to output monochrome natively
-# Chris Monson (2010-03-09):
-# * Bumped version to 2.2.0-alpha1 - major change!
-# * Support pdflatex natively and by default (issue 6 - a long time coming)
-# * Add ability to have a single $HOME/.latex-makefile/Makefile.ini for
-# all invocations
-# * Reworked graphic inclusion detection so that extensions need not be
-# specified for either build strategy (e.g.,
-# \includegraphics{test1.eps} -> \includegrahpics{test1})
-# * Changed log format to include filenames and line numbers
-# Chris Monson (2010-02-04):
-# * Bumped version to 2.1.43
-# * All of the following are for issue 63 (thanks to mojoh81):
-# * Added documentation about fixing Makefile.ini default target
-# * Added perl and python script targets
-# * Fixed run logic to allow included .tex files to be scripted (the
-# run-again logic now detects missing .tex files, and the MV
-# command has been switched out for a command that only invokes
-# MV if the files exist)
-# * Changed scripted generation to only run once per make invocation
-# * Added dependency on expr
-# Chris Monson (2010-01-19):
-# * Bumped version to 2.1.42
-# * issue 62: Added .brf extension to cleanable files (backrefs)
-# Chris Monson (2010-01-07):
-# * Bumped version to 2.1.41
-# * issue 60: bad makeindex runs now error out on subsequent tries
-# Chris Monson (2009-12-01):
-# * Bumped version to 2.1.40
-# * issue 36: build all indices (for e.g., splitidx usage)
-# * issue 59: clean up all generated files (including indices)
-# Chris Monson (2009-11-23):
-# * Bumped version to 2.1.39
-# * issue 57: change ps2pdf invocations to just use gs directly
-# Chris Monson (2009-11-19):
-# * Bumped version to 2.1.38
-# * issue 57: Added some limited support for Cygwin (spaces in filenames)
-# Chris Monson (2009-11-15):
-# * Bumped version to 2.1.37
-# * Removed svninfo, since this is now managed by mercurial
-# * Fixed typo in changelist
-# * Issue 52: added jpg->eps conversion (thanks to brubakee)
-# * Issue 54: fix missing Overfull colorization due to lack of a blank
-# line preceding the first error.
-# * Issue 51: remove head.tmp and body.tmp in make clean invocation
-# * Issue 56: maintain multiple versions of log files (for debugging)
-# Chris Monson (2009-11-14):
-# * Bumped version to 2.1.36
-# * Issues 53 and 49: added .brf, .mtc, and .maf to the cleanables
-# Chris Monson (2009-11-05):
-# * Bumped version to 2.1.35
-# * Added nomenclature support (see issue 48)
-# Chris Monson (2009-10-29):
-# * Bumped version to 2.1.34
-# * Fixed _out_ creation bug introduced in 2.1.33 (it was always created)
-# * Fixed erroneous help output for $HOME in BINARY_TARGET_DIR
-# * Changed contact email address - bring on the spam!
-# Chris Monson (2009-10-21):
-# * Bumped version to 2.1.33
-# * Fixed issue 46, adding support for dot2tex (thanks to fdemesmay)
-# * Made all_files.* settable in Makefile.ini (using ?= instead of :=)
-# * Fixed issue 47, thanks to fdemesmay: add binary copy directory, copy
-# dvi, pdf, and ps if it exists
-# Chris Monson (2009-09-25):
-# * Bumped version to 2.1.32
-# * Fixed so that a changed lol file will cause a rebuild
-# * Added .lol files to the cleanable list
-# Chris Monson (2009-09-08):
-# * Bumped version to 2.1.31
-# * Closed issue 43: evince doesn't notice pdf change w/out touch
-# Chris Monson (2009-08-28):
-# * Bumped version to 2.1.30
-# * Closed issue 39: Capture multi-line log warnings/errors to output
-# Chris Monson (2009-08-26):
-# * Bumped version to 2.1.29
-# * Closed issue 42: add svg support using inkscape
-# Chris Monson (2009-08-17):
-# * Bumped version to 2.1.28
-# * Patch from paul.biggar for issue 38: package warnings are overlooked
-# Chris Monson (2009-08-07):
-# * Bumped version to 2.1.27
-# * Included patch for issue 37 - removes pdf/ps files before copying,
-# allowing some broken viewers to see changes properly.
-# Chris Monson (2009-05-15):
-# * Bumped version to 2.1.26
-# * Included patch for issue 9 from favonia - detects .fig changes for
-# pstex files during regular compilation, so long as the pstex
-# has been built at least once with make all-pstex.
-# Chris Monson (2009-03-27):
-# * Bumped version to 2.1.25
-# * Cleaned up a bunch of variable setting stuff - more stuff is now
-# settable from Makefile.ini
-# * Cleaned up documentation for various features, especially settable
-# variables.
-# * issue 28: support for png -> eps conversion (it even looks good!)
-# * issue 29: support for "neverclean" files in Makefile.ini
-# * issue 30: make ps2pdf14 the default - fall back when not there
-# Chris Monson (2009-03-09):
-# * Bumped version to 2.1.24
-# * issue 27: xmgrace support (thanks to rolandschulzhd)
-# Chris Monson (2008-10-23):
-# * Bumped version to 2.1.23
-# * issue 23: fixed _check_programs to not use bash string subs
-# Chris Monson (2008-09-02):
-# * Bumped version to 2.1.22
-# * Appled patch from Holger <yllohy@googlemail.com> to add include
-# sources and some documentation updates.
-# * Updated backup_patterns to be a bit more aggressive (also thanks to
-# Holger)
-# Chris Monson (2008-08-30):
-# * Bumped version to 2.1.21
-# * Added ability to specify onlysources.* variables to indicate the only
-# files that should *not* be considered includes. Thanks to Holger
-# <yllohy@googlemail.com> for this patch.
-# * Added an automatic include of Makefile.ini if it exists. Allows
-# settings to be made outside of this makefile.
-# Chris Monson (2008-05-21):
-# * Bumped version to 2.1.20
-# * Added manual pstex compilation support (run make all-pstex first)
-# * Removed all automatic pstex support. It was totally breaking
-# everything and is very hard to incorporate into the makefile
-# concept because it requires LaTeX to *fail* before it can
-# determine that it needs the files.
-# Chris Monson (2008-04-17):
-# * Bumped version to 2.1.19
-# * Changed the pstex build hack to be on by default
-# Chris Monson (2008-04-09):
-# * Bumped version to 2.1.18
-# * issue 16: fixed pstex build problems, seems nondeterministic. Added
-# gratuitious hack for testing: set PSTEX_BUILD_ALL_HACK=1.
-# Chris Monson (2008-04-09):
-# * Bumped version to 2.1.17
-# * issue 20: fixed accumulation of <pid>*.make files - wildcard was
-# refusing to work on files that are very recently created.
-# Chris Monson (2008-04-02):
-# * Bumped version to 2.1.16
-# * issue 19: Removed the use of "type" to fix broken "echo" settings
-# Chris Monson (2008-03-27):
-# * Bumped version to 2.1.15
-# * issue 18: Favors binary echo over builtin, as binary understands -n
-# * issue 16: Fixed handling of missing pstex_t files in the log
-# * issue 9: Added .SECONDARY target for .pstex files
-# Chris Monson (2008-03-21):
-# * Bumped version to 2.1.14
-# * Fixed broken aux file flattening, which caused included bibs to be
-# missed.
-# Chris Monson (2008-03-20):
-# * Bumped version to 2.1.13
-# * Changed error output colorization to show errors for missing files
-# that are not graphics files.
-# Chris Monson (2008-03-20):
-# * Bumped version to 2.1.12
-# * Fixed a regression introduced in r28 that makes bibtex fail when
-# there is no index file present
-# Chris Monson (2008-03-03):
-# * Bumped version to 2.1.11
-# * Fixed issue 11 (handle index files, reported by abachn)
-# * Cleaned up some comments and help text
-# Chris Monson (2008-01-24):
-# * Bumped version to 2.1.10
-# * Fixed to work when 'sh' is a POSIX shell like 'dash'
-# Chris Monson (2007-12-12):
-# * Bumped version to 2.1.9
-# * Fixed documentation and dependency graph for pstex files
-# Chris Monson (2007-12-12):
-# * Bumped version to 2.1.8
-# * Added basic pstex_t support for fig files (Issue 9 by favonia)
-# I still suggest that psfrag be used instead.
-# Chris Monson (2007-10-16):
-# * Bumped version to 2.1.7
-# * Removed todo item: allow other comment directives for rst conversion
-# * Added ability to use global rst style file _rststyle_._include_.tex
-# * Added help text to that effect
-# Chris Monson (2007-05-20):
-# * Bumped version to 2.1.6
-# * Changed default paper size for rst files
-# * Added todo item: fix paper size for rst files
-# * Added todo item: allow other comment directives for rst conversion
-# Chris Monson (2007-04-02):
-# * Bumped version to 2.1.5
-# * Addressed Issue 7, incorrect .gpi.d generation in subdirectories
-# Chris Monson (2007-03-28):
-# * Bumped version to 2.1.4
-# * Fixed syntax error in dot output
-# Chris Monson (2007-03-01):
-# * Bumped version to 2.1.3
-# * Added reST to the included documentation
-# * Fixed graphics and script generation to be settable in the
-# environment.
-# Chris Monson (2007-02-23):
-# * Bumped version to 2.1.2
-# * Added the ability to generate .tex files from .rst files
-# Chris Monson (2006-10-17):
-# * Bumped version to 2.1.1
-# * Fixed includes from subdirectories (sed-to-sed slash escape problem)
-# Chris Monson (2006-10-05):
-# * Bumped version to 2.1.0 (pretty serious new feature added)
-# * New feature: bib files can now be anywhere on the BIBINPUTS path
-# * New programs: kpsewhich (with tetex) and xargs (BSD)
-# Chris Monson (2006-09-28):
-# * Bumped version to 2.0.9
-# * Added ability to parse more than one bibliography
-# Chris Monson (2006-06-01):
-# * Bumped version to 2.0.8
-# * Added .vrb to the list of cleaned files
-# Chris Monson (2006-04-26):
-# * Bumped version to 2.0.7
-# * Fixed so that clean-nographics does not remove .gpi.d files
-# * Removed jpg -> eps hack (not working properly -- just pre-convert)
-# * Fixed so that postscript grayscale can be done with BSD sed
-# Chris Monson (2006-04-25):
-# * Bumped version to 2.0.6
-# * Fixed so that changed toc, lot, lof, or out causes a rebuild
-# Chris Monson (2006-04-17):
-# * Bumped version to 2.0.5
-# * Added jpg -> eps conversion target
-# Chris Monson (2006-04-12):
-# * Bumped version to 2.0.4
-# * Fixed BSD sed invocation to not use \| as a branch delimiter
-# * Added a comment section on what is and is not allowed in BSD sed
-# * Made paper size handling more robust while I was at it
-# * Fixed postscript RGB grayscale to use a weighted average
-# * Fixed postscript HSB grayscale to convert to RGB first
-# * Fixed a problem with rebuilding .bbl files
-# Chris Monson (2006-04-11):
-# * Bumped version to 2.0.3
-# * Fixed some BSD sed problems: can't use \n in substitutions
-# Chris Monson (2006-04-10):
-# * Bumped version to 2.0.2
-# * Once again removed ability to create .tex files from scripts
-# * \includeonly works again
-# Chris Monson (2006-04-09):
-# * Bumped version to 2.0.1
-# * Fixed grayscale postscript handling to be more robust
-# * Added ability to generate ._gray_. files from eps and eps.gz
-# * Added ability to clean ._gray_.eps files created from .eps files
-# Chris Monson (2006-04-07):
-# * Bumped version to 2.0.0
-# * Removed clunky ability to create included .tex files from scripts
-# * Added note in the help about included tex scripting not working
-# * Fixed the .eps generation to delete %.gpihead.make when finished
-# * Abandoned designs to use shell variables to create sed scripts
-# * Abandoned __default__.tex.sh idea: it causes recursion with %: .
-# * Removed web page to-do. All items are now complete.
-# * Added better grayscale conversion for dot figures (direct ps fixup).
-# * Include files can now be scripted (at the expense of \includeonly).
-# * Updated dependency graph to contain better node names.
-# Chris Monson (2006-04-06):
-# * Bumped version to 2.0b3
-# * Top level includes now fail if there is no rule to build them
-# * A helpful message is printed when they do fail
-# * Grayscale has been changed to be ._gray_, other phonies use _ now, too
-# * Grayscale handling has been completed
-# * Changed _include_stems target to _includes target.
-# * Fixed _includes target to be useful by itself.
-# * Removed the ability to specify clean and build targets at once
-# * Verified that epsfig works fine with current code
-# * Fixed included scripts so that they are added to the dep files
-# * Fixed so that graphics includes don't happen if they aren't for gpi
-# * Fixed dot output to allow grayscale.
-# Chris Monson (2006-04-05):
-# * Bumped version to 2.0b2
-# * Removed automatic -gray output. It needs fixing in a bad way.
-# * Revamped dependency creation completely.
-# * Fixed conditional inclusion to actually work (test.nobuild.d, test.d).
-# * Fixed clean target to remove log targets
-# * Added the 'monochrome' word for gray gpi output
-# * Added a _check_gpi_files target that checks for common problems
-# * Changed the _version target into the version target (no _)
-# * Added better handling of grayscale files. Use the .gray.pdf target.
-# * Fixed testing for rebuilds
-# Chris Monson (2006-04-04):
-# * Bumped version to 2.0b1
-# * Changed colorization of output
-# * Made .auxbbl and .auxtex .make files secondary targets
-# * Shortened and simplified the final latex invocation loop
-# * Added version-specific output ($$i vs. $$$$i) in latex loop
-# * Added a build message for the first .dvi run (Building .dvi (0))
-# * Removed some build messages that most people don't care about.
-# * Simplified procedure for user-set colors -- simple text specification
-# * Fixed diff output to...not output.
-# * Fixed rerun bug -- detect not only when preceded with LaTeX Warning
-# * Sped up gpi plotting
-# * Added error handling and colorized output for gpi failure
-# * Documented color changing stuff.
-# * Now sort the flattened aux file to avoid false recompilation needs
-# * Added clean-nographics target
-# * Don't remove self.dvi file if self.aux is missing in the log
-# * Clarified some code. Did some very minor adjusting.
-# Chris Monson (2006-04-03):
-# * Bumped version to 2.0a7
-# * Added .dvi and .ps files as secondary files.
-# * Fixed handling of multiple run detection when includeonly is in use.
-# * Added code to flatten .aux files.
-# * Added more files as .SECONDARY prerequisites to avoid recompilation.
-# * Fixed the inputs generation to be much simpler and to use pipes.
-# * Added the dependency graph directly into the makefile.
-# * Changed flatten-aux to remove \@writefile \relax \newlabel, etc.
-# * Undid pipe changes with sed usage (BSD sed doesn't know -f-).
-# * Added a _check_programs target that tells you what your system has.
-# * Fixed an error in colorization that made unnecessary errors appear
-# * Added view targets.
-# * Updated help text.
-# * Augmented cookies so that .aux can trigger .bbl and .dvi rebuilds
-# * Added more informative error handling for dvips and ps2pdf
-# Chris Monson (2006-04-02):
-# * Bumped version to 2.0a6
-# * Added indirection to .bbl dependencies to avoid rebuilding .bbl files
-# * Streamlined the diff invocation to eliminate an existence test
-# * Removed special shell quote escape variables
-# * Moved includes to a more prominent location
-# * Fixed .inputs.make to not contain .aux files
-# * Fixed embedding to use a file instead of always grepping.
-# * Added *.make.temp to the list of cleanable files
-# * Fixed Ruby. It should now be supported properly.
-# * Now differentiate between all, default, and buildable files.
-# * Fixed to bail out on serious errors.
-# * Revised the handling of includable files. Still working on it.
-# Chris Monson (2006-03-31):
-# * Bumped version to 2.0a5
-# * Fixed a bug with LaTeX error detection (there can be spaces)
-# * Added .bbl support, simplifying everything and making it more correct
-# * Refactored some tests that muddy the code
-# * Did a little cleanup of some shell loops that can safely be make loops
-# * Added support for graphviz .dot files
-# * Made _all_programs output easier to read
-# * Added the ruby support that has long been advertised
-# * Font embedding was screwed up for PostScript -- now implicit
-# * Changed the generation of -gray.gpi files to a single command
-# * Changed any make-generated file that is not included from .d to .make
-# Chris Monson (2006-03-30):
-# * Bumped version to 2.0a4
-# * Fixed a bug with very long graphics file names
-# * Added a todo entry for epsfig support
-# * Fixed a bug paper size bug: sometimes more than one entry appears
-# * Fixed DVI build echoing to display the number instead of process ID
-# * DVI files are now removed on first invocation if ANY file is missing
-# * Added a simple grayscale approach: if a file ends with -gray.gpi, it
-# is created from the corresponding .gpi file with a special
-# comment ##GRAY in its header, which causes coloring to be
-# turned off.
-# * Fixed a bug in the handling of .tex.sh files. For some reason I had
-# neglected to define file stems for scripted output.
-# * Removed a trailing ; from the %.graphics dependencies
-# * Added dvips embedding (I think it works, anyway)
-# Chris Monson (2006-03-29):
-# * Bumped version to 2.0a3
-# * Fixed error in make 3.79 with MAKEFILE_LIST usage
-# * Added the presumed filename to the _version output
-# * Added a vim macro for converting sed scripts to make commands
-# * Added gpi dependency support (plotting external files and loading gpi)
-# * Allow .gpi files to be ignored if called .include.gpi or .nobuild.gpi
-# * Fixed sed invocations where \+ was used. BSD sed uses \{1,\}.
-# Chris Monson (2006-03-28):
-# * Bumped version to 2.0a2
-# * Added SHELL_DEBUG and VERBOSE options
-# * Changed the default shell back to /bin/sh (unset, in other words)
-# * Moved .PHONY declarations closer to their targets
-# * Moved help text into its own define block to obtain better formatting
-# * Removed need for double-entry when adding a new program invocation
-# * Moved .SECONDARY declaration closer to its relevant occurrence
-# * Commented things more heavily
-# * Added help text about setting terminal and output in gnuplot
-# * Created more fine-grained clean targets
-# * Added a %.graphics target that generates all of %'s graphics
-# * Killed backward-compatible graphics generation (e.g., eps.gpi=gpi.eps)
-# * For now, we're just GPL 2, not 3. Maybe it will change later
-# * Made the version and svninfo into variables
-# Chris Monson (2006-03-27):
-# * Bumped version to 2.0a1
-# * Huge, sweeping changes -- automatic dependencies
-#
-
-# IMPORTANT!
-#
-# When adding to the following list, do not introduce any blank lines. The
-# list is extracted for documentation using sed and is terminated by a blank
-# line.
-#
-# EXTERNAL PROGRAMS:
-# = ESSENTIAL PROGRAMS =
-# == Basic Shell Utilities ==
-CAT ?= cat
-CP ?= cp -f
-DIFF ?= diff
-ECHO ?= echo
-EGREP ?= egrep
-ENV ?= env
-EXPR ?= expr
-MV ?= mv -f
-SED ?= sed
-SORT ?= sort
-TOUCH ?= touch
-UNIQ ?= uniq
-WHICH ?= which
-XARGS ?= xargs
-SLEEP ?= sleep
-# == LaTeX (tetex-provided) ==
-BIBTEX ?= bibtex
-DVIPS ?= dvips
-LATEX ?= latex
-PDFLATEX ?= pdflatex
-XELATEX ?= xelatex
-EPSTOPDF ?= epstopdf
-MAKEINDEX ?= makeindex
-XINDY ?= xindy
-KPSEWHICH ?= kpsewhich
-GS ?= gs
-# = OPTIONAL PROGRAMS =
-# == For MikTex under Cygwin, to get path names right
-CYGPATH ?= cygpath
-# == Makefile Color Output ==
-TPUT ?= tput
-# == TeX Generation ==
-PERL ?= perl
-PYTHON ?= python
-RST2LATEX ?= rst2latex.py
-LHS2TEX ?= lhs2tex
-# == EPS Generation ==
-CONVERT ?= convert # ImageMagick
-DOT ?= dot # GraphViz
-DOT2TEX ?= dot2tex # dot2tex - add options (not -o) as needed
-MPOST ?= mpost # MetaPost
-FIG2DEV ?= fig2dev # XFig
-GNUPLOT ?= gnuplot # GNUplot
-INKSCAPE ?= inkscape # Inkscape (svg support)
-XMGRACE ?= xmgrace # XMgrace
-PNGTOPNM ?= pngtopnm # From NetPBM - step 1 for png -> eps
-PPMTOPGM ?= ppmtopgm # From NetPBM - (gray) step 2 for png -> eps
-PNMTOPS ?= pnmtops # From NetPBM - step 3 for png -> eps
-GUNZIP ?= gunzip # GZipped EPS
-# == Beamer Enlarged Output ==
-PSNUP ?= psnup
-# == Viewing Stuff ==
-VIEW_POSTSCRIPT ?= gv
-VIEW_PDF ?= xpdf
-VIEW_GRAPHICS ?= display
-
-# Xindy glossaries
-XINDYLANG ?= english
-XINDYENC ?= utf8
-
-# If cygpath is present, then we create a path-norm function that uses it,
-# otherwise the function is just a no-op. Issue 112 has details.
-USE_CYGPATH := $(if $(shell $(WHICH) $(CYGPATH) 2>/dev/null),yes,)
-
-define path-norm
-$(if $(USE_CYGPATH),$(shell $(CYGPATH) -u "$1"),$1)
-endef
-
-# Command options for embedding fonts and postscript->pdf conversion
-PS_EMBED_OPTIONS ?= -dPDFSETTINGS=/printer -dEmbedAllFonts=true -dSubsetFonts=true -dMaxSubsetPct=100
-PS_COMPATIBILITY ?= 1.4
-
-# If set to something, will cause temporary files to not be deleted immediately
-KEEP_TEMP ?=
-
-# Defaults for GPI
-DEFAULT_GPI_EPS_FONTSIZE ?= 22
-DEFAULT_GPI_PDF_FONTSIZE ?= 12
-
-# Style file for ReST
-RST_STYLE_FILE ?= $(wildcard _rststyle_._include_.tex)
-
-# This ensures that even when echo is a shell builtin, we still use the binary
-# (the builtin doesn't always understand -n)
-FIXED_ECHO := $(if $(findstring -n,$(shell $(ECHO) -n)),$(shell which echo),$(ECHO))
-ECHO := $(if $(FIXED_ECHO),$(FIXED_ECHO),$(ECHO))
-
-define determine-gnuplot-output-extension
-$(if $(shell $(WHICH) $(GNUPLOT) 2>/dev/null),
- $(if $(findstring unknown or ambiguous, $(shell $(GNUPLOT) -e "set terminal pdf" 2>&1)),
- eps, pdf),
- none)
-endef
-
-GNUPLOT_OUTPUT_EXTENSION ?= $(strip $(call determine-gnuplot-output-extension))
-
-# Internal code should use this because of :=. This means that the potentially
-# expensive script invocation used to determine whether pdf is available will
-# only be run once.
-GPI_OUTPUT_EXTENSION := $(strip $(GNUPLOT_OUTPUT_EXTENSION))
-
-# Note, if the terminal *does* understand fsize, then we expect this call to
-# create a specific error here: "fsize: expecting font size". Otherwise, we
-# assume that fsize is not understood.
-GPI_FSIZE_SYNTAX := $(strip \
-$(if \
- $(filter pdf,$(GPI_OUTPUT_EXTENSION)),\
- $(if \
- $(findstring fsize: expecting font size,$(shell $(GNUPLOT) -e "set terminal pdf fsize" 2>&1)),\
- fsize FONTSIZE,\
- font ",FONTSIZE"),\
- FONTSIZE))
-
-# Directory into which we place "binaries" if it exists.
-# Note that this can be changed on the commandline or in Makefile.ini:
-#
-# Command line:
-# make BINARY_TARGET_DIR=$HOME/pdfs myfile.pdf
-#
-# Also, you can specify a relative directory (relative to the Makefile):
-# make BINARY_TARGET_DIR=pdfs myfile.pdf
-#
-# Or, you can use Makefile.ini:
-#
-# BINARY_TARGET_DIR := $(HOME)/bin_out
-#
-BINARY_TARGET_DIR ?= _out_
-
-RESTARTS := $(if $(MAKE_RESTARTS),$(MAKE_RESTARTS),0)
-# SH NOTES
-#
-# On some systems, /bin/sh, which is the default shell, is not linked to
-# /bin/bash. While bash is supposed to be sh-compatible when invoked as sh, it
-# just isn't. This section details some of the things you have to stay away
-# from to remain sh-compatible.
-#
-# * File pattern expansion does not work for {}
-# * [ "$x" = "$y" ] has to be [ x"$x" x"$y" ]
-# * &> for stderr redirection doesn't work, use 2>&1 instead
-#
-# BSD SED NOTES
-#
-# BSD SED is not very nice compared to GNU sed, but it is the most
-# commonly-invoked sed on Macs (being based on BSD), so we have to cater to
-# it or require people to install GNU sed. It seems like the GNU
-# requirement isn't too bad since this makefile is really a GNU makefile,
-# but apparently GNU sed is much less common than GNU make in general, so
-# I'm supporting it here.
-#
-# Sad experience has taught me the following about BSD sed:
-#
-# * \+ is not understood to mean \{1,\}
-# * \| is meaningless (does not branch)
-# * \n cannot be used as a substitution character
-# * ? does not mean \{0,1\}, but is literal
-# * a\ works, but only reliably for a single line if subsequent lines
-# have forward slashes in them (as is the case in postscript)
-#
-# For more info (on the Mac) you can consult
-#
-# man -M /usr/share/man re_format
-#
-# And look for the word "Obsolete" near the bottom.
-
-#
-# EXTERNAL PROGRAM DOCUMENTATION SCRIPT
-#
-
-# $(call output-all-programs,[<output file>])
-define output-all-programs
- [ -f '$(this_file)' ] && \
- $(SED) \
- -e '/^[[:space:]]*#[[:space:]]*EXTERNAL PROGRAMS:/,/^$$/!d' \
- -e '/EXTERNAL PROGRAMS/d' \
- -e '/^$$/d' \
- -e '/^[[:space:]]*#/i\ '\
- -e 's/^[[:space:]]*#[[:space:]][^=]*//' \
- $(this_file) $(if $1,> '$1',) || \
- $(ECHO) "Cannot determine the name of this makefile."
-endef
-
-# If they misspell gray, it should still work.
-GRAY ?= $(call get-default,$(GREY),)
-
-#
-# Utility Functions and Definitions
-#
-#
-# Transcript
-# For debug/testing purposes: writes a message to
-# filename.transcript.make for each command that was run, including
-# some human-readable justification for why it had to be run.
-# For example: "Running latex (log-file indicated that this is necessary)"
-# Set WRITE_TRANSCRIPT to something to activate
-WRITE_TRANSCRIPT ?=
-# Set reason for the next run call
-# $(call set-run-reason,message)
-set-run-reason = export run_reason="$1"
-# Log command to the transcript file
-# $(call set-run-reason,command,job_name)
-define transcript
-$(if $(WRITE_TRANSCRIPT), \
- $(ECHO) "Running $1 ($$run_reason)" >> $2.transcript.make; \
- export run_reason="", \
- $(sh_true))
-endef
-
-# Don't call this directly - it is here to avoid calling wildcard more than
-# once in remove-files.
-remove-files-helper = $(if $1,$(RM) $1,$(sh_true))
-
-# $(call remove-files,file1 file2)
-remove-files = $(call remove-files-helper,$(wildcard $1))
-
-# Removes all cleanable files in the given list
-# $(call clean-files,file1 file2 file3 ...)
-# Works exactly like remove-files, but filters out files in $(neverclean)
-clean-files = \
- $(call remove-files-helper,$(call cleanable-files,$(wildcard $1)))
-
-# Outputs all generated files to STDOUT, along with some others that are
-# created by these (e.g., .idx files end up producing .ilg and .ind files).
-# Discovered by reading *.fls OUTPUT lines and producing corresponding .ind
-# filenames as needed.
-#
-# $(call get-generated-names,<source recorder file (*.fls)>)
-define get-generated-names
-[ -f '$1' ] && \
-$(SED) \
- -e '/^OUTPUT /{' \
- -e ' s///' \
- -e ' p' \
- -e ' s/\.idx/\.ind/p' \
- -e ' s/\.ind/\.ilg/p' \
- -e '}' \
- -e 'd' \
- '$1' \
-| $(SORT) | $(UNIQ)
-endef
-
-# This removes files without checking whether they are there or not. This
-# sometimes has to be used when the file is created by a series of shell
-# commands, but there ends up being a race condition: make doesn't know about
-# the file generation as quickly as the system does, so $(wildcard ...) doesn't
-# work right. Blech.
-# $(call remove-temporary-files,filenames)
-remove-temporary-files = $(if $(KEEP_TEMP),:,$(if $1,$(RM) $1,:))
-
-# Create an identifier from a file name
-# $(call cleanse-filename,filename)
-cleanse-filename = $(subst .,_,$(subst /,__,$1))
-
-# Escape dots
-# $(call escape-fname-regex,str)
-escape-fname-regex = $(subst /,\\/,$(subst .,\\.,$1))
-
-# Test that a file exists
-# $(call test-exists,file)
-test-exists = [ -e '$1' ]
-# $(call test-not-exists,file)
-test-not-exists = [ ! -e '$1' ]
-
-# $(call move-files,source,destination)
-move-if-exists = $(call test-exists,$1) && $(MV) '$1' '$2'
-
-# Copy file1 to file2 only if file2 doesn't exist or they are different
-# $(call copy-if-different,sfile,dfile)
-copy-if-different = $(call test-different,$1,$2) && $(CP) '$1' '$2'
-copy-if-exists = $(call test-exists,$1) && $(CP) '$1' '$2'
-move-if-different = $(call test-different,$1,$2) && $(MV) '$1' '$2'
-replace-if-different-and-remove = \
- $(call test-different,$1,$2) \
- && $(MV) '$1' '$2' \
- || $(call remove-files,'$1')
-
-# Note that $(DIFF) returns success when the files are the SAME....
-# $(call test-different,sfile,dfile)
-test-different = ! $(DIFF) -q '$1' '$2' >/dev/null 2>&1
-test-exists-and-different = \
- $(call test-exists,$2) && $(call test-different,$1,$2)
-
-# Return value 1, or value 2 if value 1 is empty
-# $(call get-default,<possibly empty arg>,<default value if empty>)
-get-default = $(if $1,$1,$2)
-
-# Copy a file and log what's going on
-# $(call copy-with-logging,<source>,<target>)
-define copy-with-logging
-if [ -d '$2/' ]; then \
- if $(CP) '$1' '$2/'; then \
- $(ECHO) "$(C_INFO)Copied '$1' to '$2/'$(C_RESET)"; \
- else \
- $(ECHO) "$(C_ERROR)Failed to copy '$1' to '$2/'$(C_RESET)"; \
- fi; \
-fi
-endef
-
-# Gives a reassuring message about the failure to find include files
-# $(call include-message,<list of include files>)
-define include-message
-$(strip \
-$(if $(filter-out $(wildcard $1),$1),\
- $(shell $(ECHO) \
- "$(C_INFO)NOTE: You may ignore warnings about the"\
- "following files:" >&2;\
- $(ECHO) >&2; \
- $(foreach s,$(filter-out $(wildcard $1),$1),$(ECHO) ' $s' >&2;)\
- $(ECHO) "$(C_RESET)" >&2)
-))
-endef
-# Characters that are hard to specify in certain places
-space := $(empty) $(empty)
-colon := \:
-comma := ,
-
-# Useful shell definitions
-sh_true := :
-sh_false := ! :
-
-# Clear out the standard interfering make suffixes
-.SUFFIXES:
-
-# Turn off forceful rm (RM is usually mapped to rm -f)
-ifdef SAFE_RM
-RM := rm
-endif
-
-# Turn command echoing back on with VERBOSE=1
-ifndef VERBOSE
-QUIET := @
-endif
-
-# Turn on shell debugging with SHELL_DEBUG=1
-# (EVERYTHING is echoed, even $(shell ...) invocations)
-ifdef SHELL_DEBUG
-SHELL += -x
-endif
-
-# Get the name of this makefile (always right in 3.80, often right in 3.79)
-# This is only really used for documentation, so it isn't too serious.
-ifdef MAKEFILE_LIST
-this_file := $(firstword $(MAKEFILE_LIST))
-else
-this_file := $(wildcard GNUmakefile makefile Makefile)
-endif
-
-# Terminal color definitions
-
-REAL_TPUT := $(if $(NO_COLOR),,$(shell $(WHICH) $(TPUT)))
-
-# $(call get-term-code,codeinfo)
-# e.g.,
-# $(call get-term-code,setaf 0)
-get-term-code = $(if $(REAL_TPUT),$(shell $(REAL_TPUT) $1),)
-
-black := $(call get-term-code,setaf 0)
-red := $(call get-term-code,setaf 1)
-green := $(call get-term-code,setaf 2)
-yellow := $(call get-term-code,setaf 3)
-blue := $(call get-term-code,setaf 4)
-magenta := $(call get-term-code,setaf 5)
-cyan := $(call get-term-code,setaf 6)
-white := $(call get-term-code,setaf 7)
-bold := $(call get-term-code,bold)
-uline := $(call get-term-code,smul)
-reset := $(call get-term-code,sgr0)
-
-#
-# User-settable definitions
-#
-LATEX_COLOR_WARNING ?= magenta
-LATEX_COLOR_ERROR ?= red
-LATEX_COLOR_INFO ?= green
-LATEX_COLOR_UNDERFULL ?= magenta
-LATEX_COLOR_OVERFULL ?= red bold
-LATEX_COLOR_PAGES ?= bold
-LATEX_COLOR_BUILD ?= cyan
-LATEX_COLOR_GRAPHIC ?= yellow
-LATEX_COLOR_DEP ?= green
-LATEX_COLOR_SUCCESS ?= green bold
-LATEX_COLOR_FAILURE ?= red bold
-
-# Gets the real color from a simple textual definition like those above
-# $(call get-color,ALL_CAPS_COLOR_NAME)
-# e.g., $(call get-color,WARNING)
-get-color = $(subst $(space),,$(foreach c,$(LATEX_COLOR_$1),$($c)))
-
-#
-# STANDARD COLORS
-#
-C_WARNING := $(call get-color,WARNING)
-C_ERROR := $(call get-color,ERROR)
-C_INFO := $(call get-color,INFO)
-C_UNDERFULL := $(call get-color,UNDERFULL)
-C_OVERFULL := $(call get-color,OVERFULL)
-C_PAGES := $(call get-color,PAGES)
-C_BUILD := $(call get-color,BUILD)
-C_GRAPHIC := $(call get-color,GRAPHIC)
-C_DEP := $(call get-color,DEP)
-C_SUCCESS := $(call get-color,SUCCESS)
-C_FAILURE := $(call get-color,FAILURE)
-C_RESET := $(reset)
-
-#
-# PRE-BUILD TESTS
-#
-
-# Check that clean targets are not combined with other targets (weird things
-# happen, and it's not easy to fix them)
-hascleangoals := $(if $(sort $(filter clean clean-%,$(MAKECMDGOALS))),1)
-hasbuildgoals := $(if $(sort $(filter-out clean clean-%,$(MAKECMDGOALS))),1)
-ifneq "$(hasbuildgoals)" ""
-ifneq "$(hascleangoals)" ""
-$(error $(C_ERROR)Clean and build targets specified together$(C_RESET)))
-endif
-endif
-
-#
-# VARIABLE DECLARATIONS
-#
-
-# Names of sed scripts that morph gnuplot files -- only the first found is used
-GNUPLOT_SED := global-gpi.sed gnuplot.sed
-GNUPLOT_GLOBAL := global._include_.gpi gnuplot.global
-
-ifeq "$(strip $(BUILD_STRATEGY))" "latex"
-default_graphic_extension ?= eps
-latex_build_program ?= $(LATEX)
-build_target_extension ?= dvi
-hyperref_driver_pattern ?= hdvips
-hyperref_driver_error ?= Using dvips: specify ps2pdf in the hyperref options.
-endif
-
-ifeq "$(strip $(BUILD_STRATEGY))" "pdflatex"
-default_graphic_extension ?= pdf
-latex_build_program ?= $(PDFLATEX)
-build_target_extension ?= pdf
-hyperref_driver_pattern ?= hpdf.*
-hyperref_driver_error ?= Using pdflatex: specify pdftex in the hyperref options (or leave it blank).
-endif
-
-ifeq "$(strip $(BUILD_STRATEGY))" "xelatex"
-default_graphic_extension ?= pdf
-latex_build_program ?= $(XELATEX)
-build_target_extension ?= pdf
-hyperref_driver_pattern ?= hdvipdf.*
-hyperref_driver_error ?= Using pdflatex: specify pdftex in the hyperref options (or leave it blank).
-endif
-
-# Files of interest
-all_files.tex ?= $(wildcard *.tex)
-all_files.tex.sh ?= $(wildcard *.tex.sh)
-all_files.tex.pl ?= $(wildcard *.tex.pl)
-all_files.tex.py ?= $(wildcard *.tex.py)
-all_files.rst ?= $(wildcard *.rst)
-all_files.lhs ?= $(wildcard *.lhs)
-all_files.mp ?= $(wildcard *.mp)
-all_files.fig ?= $(wildcard *.fig)
-all_files.gpi ?= $(wildcard *.gpi)
-all_files.dot ?= $(wildcard *.dot)
-all_files.xvg ?= $(wildcard *.xvg)
-all_files.svg ?= $(wildcard *.svg)
-all_files.png ?= $(wildcard *.png)
-all_files.jpg ?= $(wildcard *.jpg)
-all_files.jpeg ?= $(wildcard *.jpeg)
-all_files.eps.gz ?= $(wildcard *.eps.gz)
-all_files.eps ?= $(wildcard *.eps)
-
-# Utility function for obtaining all files not specified in $(neverclean)
-# $(call cleanable-files,file1 file2 file3 ...)
-# Returns the list of files that is not in $(wildcard $(neverclean))
-cleanable-files = $(filter-out $(wildcard $(neverclean)), $1)
-
-# Utility function for getting all .$1 files that are to be ignored
-# * files listed in $(includes.$1)
-# * files not listed in $(onlysources.$1) if it is defined
-ignore_files = \
- $(includes.$1) \
- $(if $(onlysources.$1),$(filter-out $(onlysources.$1), $(all_files.$1)))
-
-# Patterns to never be allowed as source targets
-ignore_patterns := %._include_
-
-# Patterns allowed as source targets but not included in 'all' builds
-nodefault_patterns := %._nobuild_ $(ignore_patterns)
-
-# Utility function for getting targets suitable building
-# $(call filter-buildable,suffix)
-filter-buildable = \
- $(filter-out $(call ignore_files,$1) \
- $(addsuffix .$1,$(ignore_patterns)),$(all_files.$1))
-
-# Utility function for getting targets suitable for 'all' builds
-# $(call filter-default,suffix)
-filter-default = \
- $(filter-out $(call ignore_files,$1) \
- $(addsuffix .$1,$(nodefault_patterns)),$(all_files.$1))
-
-# Top level sources that can be built even when they are not by default
-files.tex := $(call filter-buildable,tex)
-files.tex.sh := $(call filter-buildable,tex.sh)
-files.tex.pl := $(call filter-buildable,tex.pl)
-files.tex.py := $(call filter-buildable,tex.py)
-files.rst := $(call filter-buildable,rst)
-files.lhs := $(call filter-buildable,lhs)
-files.gpi := $(call filter-buildable,gpi)
-files.dot := $(call filter-buildable,dot)
-files.mp := $(call filter-buildable,mp)
-files.fig := $(call filter-buildable,fig)
-files.xvg := $(call filter-buildable,xvg)
-files.svg := $(call filter-buildable,svg)
-files.png := $(call filter-buildable,png)
-files.jpg := $(call filter-buildable,jpg)
-files.jpeg := $(call filter-buildable,jpeg)
-files.eps.gz := $(call filter-buildable,eps.gz)
-files.eps := $(call filter-buildable,eps)
-
-# Make all pstex targets secondary. The pstex_t target requires the pstex
-# target, and nothing else really depends on it, so it often gets deleted.
-# This avoids that by allowing *all* fig files to be pstex targets, which is
-# perfectly valid and causes no problems even if they're going to become eps
-# files in the end.
-.SECONDARY: $(patsubst %.fig,%.pstex,$(files.fig))
-
-# Make all .tex targets secondary that result .rst and .lhs:
-.SECONDARY: $(patsubst %.rst,%.tex,$(files.rst))
-.SECONDARY: $(patsubst %.lhs,%.tex,$(files.lhs))
-
-# Top level sources that are built by default targets
-default_files.tex := $(call filter-default,tex)
-default_files.tex.sh := $(call filter-default,tex.sh)
-default_files.tex.pl := $(call filter-default,tex.pl)
-default_files.tex.py := $(call filter-default,tex.py)
-default_files.rst := $(call filter-default,rst)
-default_files.lhs := $(call filter-default,lhs)
-default_files.gpi := $(call filter-default,gpi)
-default_files.dot := $(call filter-default,dot)
-default_files.mp := $(call filter-default,mp)
-default_files.fig := $(call filter-default,fig)
-default_files.xvg := $(call filter-default,xvg)
-default_files.svg := $(call filter-default,svg)
-default_files.png := $(call filter-default,png)
-default_files.jpg := $(call filter-default,jpg)
-default_files.jpeg := $(call filter-default,jpeg)
-default_files.eps.gz := $(call filter-default,eps.gz)
-default_files.eps := $(call filter-default,eps)
-
-# Utility function for creating larger lists of files
-# $(call concat-files,suffixes,[prefix])
-concat-files = $(foreach s,$1,$($(if $2,$2_,)files.$s))
-
-# Useful file groupings
-all_files_source := $(call concat-files,tex,all)
-all_files_source_gen := $(call concat-files,rst rhs,all)
-all_files_scripts := $(call concat-files,tex.sh tex.pl tex.py,all)
-
-.PHONY: $(all_files_scripts)
-
-default_files_source := $(call concat-files,tex,default)
-default_files_source_gen := $(call concat-files,rhs lhs,default)
-default_files_scripts := $(call concat-files,tex.sh tex.pl tex.py,default)
-
-files_source := $(call concat-files,tex)
-files_source_gen := $(call concat-files,rst lhs)
-files_scripts := $(call concat-files,tex.sh tex.pl tex.py)
-
-# Utility function for obtaining stems
-# $(call get-stems,suffix,[prefix])
-get-stems = $(sort $($(if $2,$2_,)files.$1:%.$1=%))
-
-# List of all stems (including ._include_ and ._nobuild_ file stems)
-all_stems.tex := $(call get-stems,tex,all)
-all_stems.tex.sh := $(call get-stems,tex.sh,all)
-all_stems.tex.pl := $(call get-stems,tex.pl,all)
-all_stems.tex.py := $(call get-stems,tex.py,all)
-all_stems.rst := $(call get-stems,rst,all)
-all_stems.lhs := $(call get-stems,lhs,all)
-all_stems.mp := $(call get-stems,mp,all)
-all_stems.fig := $(call get-stems,fig,all)
-all_stems.gpi := $(call get-stems,gpi,all)
-all_stems.dot := $(call get-stems,dot,all)
-all_stems.xvg := $(call get-stems,xvg,all)
-all_stems.svg := $(call get-stems,svg,all)
-all_stems.png := $(call get-stems,png,all)
-all_stems.jpg := $(call get-stems,jpg,all)
-all_stems.jpeg := $(call get-stems,jpeg,all)
-all_stems.eps.gz := $(call get-stems,eps.gz,all)
-all_stems.eps := $(call get-stems,eps,all)
-
-# List of all default stems (all default PDF targets):
-default_stems.tex := $(call get-stems,tex,default)
-default_stems.tex.sh := $(call get-stems,tex.sh,default)
-default_stems.tex.pl := $(call get-stems,tex.pl,default)
-default_stems.tex.py := $(call get-stems,tex.py,default)
-default_stems.rst := $(call get-stems,rst,default)
-default_stems.lhs := $(call get-stems,lhs,default)
-default_stems.mp := $(call get-stems,mp,default)
-default_stems.fig := $(call get-stems,fig,default)
-default_stems.gpi := $(call get-stems,gpi,default)
-default_stems.dot := $(call get-stems,dot,default)
-default_stems.xvg := $(call get-stems,xvg,default)
-default_stems.svg := $(call get-stems,svg,default)
-default_stems.png := $(call get-stems,png,default)
-default_stems.jpg := $(call get-stems,jpg,default)
-default_stems.jpeg := $(call get-stems,jpeg,default)
-default_stems.eps.gz := $(call get-stems,eps.gz,default)
-default_stems.eps := $(call get-stems,eps,default)
-
-# List of all stems (all possible bare PDF targets created here):
-stems.tex := $(call get-stems,tex)
-stems.tex.sh := $(call get-stems,tex.sh)
-stems.tex.pl := $(call get-stems,tex.pl)
-stems.tex.py := $(call get-stems,tex.py)
-stems.rst := $(call get-stems,rst)
-stems.lhs := $(call get-stems,lhs)
-stems.mp := $(call get-stems,mp)
-stems.fig := $(call get-stems,fig)
-stems.gpi := $(call get-stems,gpi)
-stems.dot := $(call get-stems,dot)
-stems.xvg := $(call get-stems,xvg)
-stems.svg := $(call get-stems,svg)
-stems.png := $(call get-stems,png)
-stems.jpg := $(call get-stems,jpg)
-stems.jpeg := $(call get-stems,jpeg)
-stems.eps.gz := $(call get-stems,eps.gz)
-stems.eps := $(call get-stems,eps)
-
-# Utility function for creating larger lists of stems
-# $(call concat-stems,suffixes,[prefix])
-concat-stems = $(sort $(foreach s,$1,$($(if $2,$2_,)stems.$s)))
-
-# The most likely to be source but not finished product go first
-graphic_source_extensions := mp \
- fig \
- gpi \
- xvg \
- svg \
- dot \
- eps.gz
-
-ifeq "$(strip $(BUILD_STRATEGY))" "latex"
-graphic_source_extensions += png jpg jpeg eps
-graphic_target_extensions := eps ps
-endif
-
-ifeq "$(strip $(BUILD_STRATEGY))" "pdflatex"
-graphic_source_extensions += eps
-graphic_target_extensions := pdf png jpg jpeg mps tif
-endif
-
-ifeq "$(strip $(BUILD_STRATEGY))" "xelatex"
-graphic_source_extensions += eps
-graphic_target_extensions := pdf png jpg jpeg mps tif
-endif
-
-all_stems_source := $(call concat-stems,tex,all)
-all_stems_source_gen := $(call concat-stems,rst lhs,all)
-all_stems_script := $(call concat-stems,tex.sh tex.pl tex.py,all)
-all_stems_graphic := $(call concat-stems,$(graphic_source_extensions),all)
-all_stems_ss := $(sort $(all_stems_source) $(all_stems_source_gen) $(all_stems_script))
-all_stems_sg := $(sort $(all_stems_script) $(all_stems_source_gen))
-all_stems_ssg := $(sort $(all_stems_ss))
-
-default_stems_source := $(call concat-stems,tex,default)
-default_stems_source_gen := $(call concat-stems,rst lhs,default)
-default_stems_script := $(call concat-stems,tex.sh tex.pl tex.py,default)
-default_stems_ss := $(sort $(default_stems_source) $(default_stems_source_gen) $(default_stems_script))
-default_stems_sg := $(sort $(default_stems_script) $(default_stems_source_gen))
-default_stems_ssg := $(sort $(default_stems_ss))
-
-stems_source := $(call concat-stems,tex)
-stems_source_gen := $(call concat-stems,rst lhs)
-stems_script := $(call concat-stems,tex.sh tex.pl tex.py)
-stems_graphic := $(call concat-stems,$(graphic_source_extensions))
-stems_gg := $(sort $(stems_graphic))
-stems_ss := $(sort $(stems_source) $(stems_source_gen) $(stems_script))
-stems_sg := $(sort $(stems_script) $(stems_source_gen))
-stems_ssg := $(sort $(stems_ss))
-
-# Calculate names that can generate the need for an include file. We can't
-# really do this with patterns because it's too easy to screw up, so we create
-# an exhaustive list.
-allowed_source_suffixes := \
- pdf \
- ps \
- dvi \
- ind \
- nls \
- bbl \
- aux \
- aux.make \
- d \
- auxbbl.make \
- _graphics \
- _show
-allowed_source_patterns := $(addprefix %.,$(allowed_source_suffixes))
-
-allowed_graphic_suffixes := \
- pdf \
- eps \
- gpihead.make \
- gpi.d
-allowed_graphic_patterns := $(addprefix %.,$(allowed_graphic_suffixes))
-
-# All targets allowed to build documents
-allowed_source_targets := \
- $(foreach suff,$(allowed_source_suffixes),\
- $(addsuffix .$(suff),$(stems_ssg)))
-
-# All targets allowed to build graphics
-allowed_graphic_targets := \
- $(foreach suff,$(allowed_graphic_suffixes),\
- $(addsuffix .$(suff),$(stems_gg)))
-
-# All targets that build multiple documents (like 'all')
-allowed_batch_source_targets := \
- all \
- all-pdf \
- all-ps \
- all-dvi \
- all-bbl \
- all-ind \
- all-gls \
- all-nls \
- show
-
-# All targets that build multiple graphics (independent of document)
-allowed_batch_graphic_targets := \
- all-graphics \
- all-pstex \
- all-dot2tex \
- show-graphics
-
-# Now we figure out which stuff is available as a make target for THIS RUN.
-real_goals := $(call get-default,$(filter-out _includes,$(MAKECMDGOALS)),\
- all)
-
-specified_source_targets := $(strip \
- $(filter $(allowed_source_targets) $(stems_ssg),$(real_goals)) \
- )
-
-specified_batch_source_targets := $(strip \
- $(filter $(allowed_batch_source_targets),$(real_goals)) \
- )
-
-specified_graphic_targets := $(strip \
- $(filter $(allowed_graphic_targets),$(real_goals)) \
- )
-
-specified_batch_graphic_targets := $(strip \
- $(filter $(allowed_batch_graphic_targets),$(real_goals)) \
- )
-
-specified_gpi_targets := $(patsubst %.gpi,%.$(default_graphic_extension),\
- $(filter $(patsubst %.$(default_graphic_extension),%.gpi,$(specified_graphic_targets)),\
- $(all_files.gpi)) \
- )
-
-# Determine which .d files need including from the information gained above.
-# This is done by first checking whether a batch target exists. If it does,
-# then all *default* stems are used to create possible includes (nobuild need
-# not apply for batch status). If no batch targets exist, then the individual
-# targets are considered and appropriate includes are taken from them.
-source_stems_to_include := \
- $(sort\
- $(if $(specified_batch_source_targets),\
- $(default_stems_ss),\
- $(foreach t,$(specified_source_targets),\
- $(foreach p,$(allowed_source_patterns),\
- $(patsubst $p,%,$(filter $p $(stems_ssg),$t)) \
- )) \
- ))
-
-# Determine which .gpi.d files are needed using the above information. We
-# first check whether a batch target is specified, then check individual
-# graphics that may have been specified.
-graphic_stems_to_include := \
- $(sort\
- $(if $(specified_batch_graphic_targets),\
- $(default_stems.gpi),\
- $(foreach t,$(specified_gpi_targets),\
- $(foreach p,$(allowed_graphic_patterns),\
- $(patsubst $p,%,$(filter $p,$t)) \
- )) \
- ))
-
-# All dependencies for the 'all' targets
-all_pdf_targets := $(addsuffix .pdf,$(stems_ssg))
-all_ps_targets := $(addsuffix .ps,$(stems_ssg))
-all_dvi_targets := $(addsuffix .dvi,$(stems_ssg))
-all_tex_targets := $(addsuffix .tex,$(stems_sg))
-all_d_targets := $(addsuffix .d,$(stems_ssg))
-all_graphics_targets := $(addsuffix .$(default_graphic_extension),$(stems_gg))
-all_pstex_targets := $(addsuffix .pstex_t,$(stems.fig))
-all_dot2tex_targets := $(addsuffix .dot_t,$(stems.dot))
-
-all_known_graphics := $(sort $(all_graphics_targets) $(wildcard *.$(default_graphic_extension)))
-
-default_pdf_targets := $(addsuffix .pdf,$(default_stems_ss))
-
-ifeq "$(strip $(BUILD_STRATEGY))" "latex"
-default_ps_targets := $(addsuffix .ps,$(default_stems_ss))
-default_dvi_targets := $(addsuffix .dvi,$(default_stems_ss))
-pre_pdf_extensions := dvi ps
-endif
-
-# Extensions generated by LaTeX invocation that can be removed when complete
-rm_ext := \
- log *.log aux $(pre_pdf_extensions) pdf blg bbl out nav snm toc lof lot lol pfg \
- fls vrb idx ind ilg glg glo gls lox nls nlo nlg brf mtc* mlf* mlt* maf brf ist fmt
-backup_patterns := *~ *.bak *.backup body.tmp head.tmp
-
-graph_stem := _graph
-
-# All LaTeX-generated files that can be safely removed
-
-rm_tex := \
- $(foreach e,$(rm_ext),$(addsuffix .$e,$(all_stems_source))) \
- $(foreach e,$(rm_ext) tex,$(addsuffix .$e,$(all_stems_sg))) \
- $(addsuffix .log,$(all_ps_targets) $(all_pdf_targets)) \
- $(addsuffix .*.log,$(stems_graphic))
-
-# These are the files that will affect .gpi transformation for all .gpi files.
-#
-# Use only the first one found. Backward compatible values are at the end.
-# Note that we use foreach, even though wildcard also returns a list, to ensure
-# that the order in the uppercase variables is preserved. Directory listings
-# provide no such guarantee, so we avoid relying on them.
-gpi_sed := $(strip \
- $(firstword $(foreach f,$(GNUPLOT_SED),$(wildcard $f))))
-gpi_global := $(strip \
- $(firstword $(foreach f,$(GNUPLOT_GLOBAL),$(wildcard $f))))
-
-#
-# Functions used in generating output
-#
-
-# Outputs all source dependencies to stdout. The first argument is the file to
-# be parsed, the second is a list of files that will show up as dependencies in
-# the new .d file created here.
-#
-# $(call get-inputs,<parsed file>,<target files>)
-define get-inputs
-$(SED) \
--e '/^INPUT/!d' \
--e 's!^INPUT \(\./\)\{0,1\}!!' \
--e 's/[[:space:]]/\\ /g' \
--e 's/\(.*\)\.aux$$/\1.tex/' \
--e '/\.tex$$/b addtargets' \
--e '/\.cls$$/b addtargets' \
--e '/\.sty$$/b addtargets' \
--e '/\.pstex_t$$/b addtargets' \
--e '/\.dot_t$$/b addtargets' \
--e 'd' \
--e ':addtargets' \
--e 's!.*!$2: $$(call path-norm,&)!' \
-'$1' | $(SORT) | $(UNIQ)
-endef
-
-# $(call get-format,<tex file>,<target files>)
-define get-format
-$(SED) \
--e '1!d' \
--e '/^%&\([[:alnum:]]\{1,\}\)\( .*\)*$$/{' \
--e ' s!!\1!' \
--e ' h' \
--e ' s/.*/# MISSING format "&.fmt" (comment forces rebuild of target file)/' \
--e ' p' \
--e ' g' \
--e ' s!.*!$2: $$(call path-norm,&.fmt)!' \
--e ' p' \
--e '}' \
--e 'd' \
-'$1'
-endef
-
-# $(call get-missing-inputs,<log file>,<target files>)
-define get-missing-inputs
-$(SED) \
--e '$${' \
--e ' /^$$/!{' \
--e ' H' \
--e ' s/.*//' \
--e ' }' \
--e '}' \
--e '/^$$/!{' \
--e ' H' \
--e ' d' \
--e '}' \
--e '/^$$/{' \
--e ' x' \
--e ' s/^\(\n\)\(.*\)/\2\1/' \
--e '}' \
--e '/^::P\(P\{1,\}\)::/{' \
--e ' s//::\1::/' \
--e ' G' \
--e ' h' \
--e ' d' \
--e '}' \
--e '/^::P::/{' \
--e ' s//::0::/' \
--e ' G' \
--e '}' \
--e 'b start' \
--e ':needonemore' \
--e 's/^/::P::/' \
--e 'G' \
--e 'h' \
--e 'd' \
--e ':needtwomore' \
--e 's/^/::PP::/' \
--e 'G' \
--e 'h' \
--e 'd' \
--e ':needthreemore' \
--e 's/^/::PPP::/' \
--e 'G' \
--e 'h' \
--e 'd' \
--e ':start' \
--e '/^! LaTeX Error: File `/{' \
--e ' b needtwomore' \
--e '}' \
--e '/^::0::\(.*\)/{' \
--e ' s//\1/' \
--e ' /Default extension: /!d' \
--e ' s/.*File `\([^'"'"']*\)'"'"' not found.*/\1/' \
--e ' s/[[:cntrl:]]//' \
--e ' /\.tex/!s/$$/.tex/' \
--e ' s/[[:space:]]/\\ /g' \
--e ' h' \
--e ' s/.*/# MISSING input "&" - (presence of comment affects build)/' \
--e ' p' \
--e ' s/.*//' \
--e ' x' \
--e ' s!^.*!$2: $$(call path-norm,&)!' \
--e ' p' \
--e '}' \
--e 'd' \
-'$1' | $(SORT) | $(UNIQ)
-endef
-
-# Get source file for specified graphics stem.
-#
-# $(call graphics-source,<stem>)
-define graphics-source
-$(strip $(firstword \
- $(wildcard \
- $(addprefix $1.,\
- $(graphic_source_extensions))) \
- $1 \
-))
-endef
-
-# Get the target file for the specified graphics file/stem
-#
-# $(call graphics-target,<stem>)
-define graphics-target
-$(strip $(if $(filter $(addprefix %.,$(graphic_target_extensions)),$1), $1,
- $(firstword $(patsubst $(addprefix %.,$(graphic_source_extensions) $(graphic_target_extensions)), %, $1).$(default_graphic_extension) $1.$(default_graphic_extension))))
-endef
-
-# Outputs all of the graphical dependencies to stdout. The first argument is
-# the stem of the source file being built, the second is a list of suffixes
-# that will show up as dependencies in the generated .d file.
-#
-# Note that we try to escape spaces in filenames where possible. We have to do
-# it with three backslashes so that as the name percolates through the makefile
-# it eventually ends up with the proper escaping when the build rule is found.
-# Ugly, but it appears to work. Note that graphicx doesn't allow filenames
-# with spaces, so this could in many ways be moot unless you're using something
-# like grffile.
-#
-# For pdflatex, we really need the missing file to be specified without an
-# extension, otherwise compilation barfs on the first missing file. Truly
-# annoying, but there you have it.
-#
-# It turns out that the graphics errors, although they have lines with empty
-# space, are only made of two paragraphs. So, we just use some sed magic to
-# get everything into paragraphs, detect when it's a paragraph that interests
-# us, and double it up. Then we get the filename only if we're missing
-# extensions (a sign that it's graphicx complaining).
-#
-# $(call get-graphics,<target file stem>)
-define get-graphics
-$(SED) \
--e '/^File: \(.*\) Graphic file (type [^)]*)/{' \
--e ' s//\1/' \
--e ' s/\.e\{0,1\}ps$$//' \
--e ' b addtargets' \
--e '}' \
--e '$${' \
--e ' /^$$/!{' \
--e ' H' \
--e ' s/.*//' \
--e ' }' \
--e '}' \
--e '/^$$/!{' \
--e ' H' \
--e ' d' \
--e '}' \
--e '/^$$/{' \
--e ' x' \
--e ' s/^\(\n\)\(.*\)/\2\1/' \
--e '}' \
--e '/^::P\(P\{1,\}\)::/{' \
--e ' s//::\1::/' \
--e ' G' \
--e ' h' \
--e ' d' \
--e '}' \
--e '/^::P::/{' \
--e ' s//::0::/' \
--e ' G' \
--e '}' \
--e 'b start' \
--e ':needonemore' \
--e 's/^/::P::/' \
--e 'G' \
--e 'h' \
--e 'd' \
--e ':needtwomore' \
--e 's/^/::PP::/' \
--e 'G' \
--e 'h' \
--e 'd' \
--e ':needthreemore' \
--e 's/^/::PPP::/' \
--e 'G' \
--e 'h' \
--e 'd' \
--e ':start' \
--e '/^[^[:cntrl:]:]*:[[:digit:]]\{1,\}:[[:space:][:cntrl:]]*LaTeX[[:space:][:cntrl:]]*Error:[[:space:][:cntrl:]]*File `/{' \
--e ' s/\n//g' \
--e ' b needonemore' \
--e '}' \
--e '/^::0::.*: LaTeX Error: File `/{' \
--e ' /\n\n$$/{' \
--e ' s/^::0:://' \
--e ' b needonemore' \
--e ' }' \
--e ' s/\n\{1,\}/ /g' \
--e ' s/[[:space:]]\{1,\}/ /g' \
--e ' s/^.*File `//' \
--e ' /extensions: /{' \
--e ' s/'"'"' not found\..*extensions: \([^[:space:]]*\).*/::::\1/' \
--e ' b fileparsed' \
--e ' }' \
--e ' s/'"'"' not found\..*/::::/' \
--e ' :fileparsed' \
--e ' s/\.e\{0,1\}ps::::$$/::::/' \
--e ' h' \
--e ' s/\(.*\)::::\(.*\)/# MISSING stem "\1" - allowed extensions are "\2" - leave comment here - it affects the build/' \
--e ' p' \
--e ' g' \
--e ' s/::::.*//' \
--e ' b addtargets' \
--e '}' \
--e 'd' \
--e ':addtargets' \
--e 's/[[:space:]]/\\\\\\&/g' \
--e 'h' \
--e 's/.*/-include &.gpi.d/' \
--e 'p' \
--e 'g' \
--e 's!.*!$1.d: $$$$(call graphics-source,&)!' \
--e 'p' \
--e 's/.*//' \
--e 'x' \
--e 's!.*!$1.$(build_target_extension) $1._graphics: $$$$(call graphics-target,&)!' \
--e 'p' \
--e 'd' \
-$1.log
-endef
-
-# Get some special comments out of the source file (e.g., paper size, beamer
-# usage, etc.)
-#
-# $(call get-source-specials,<source file name>,<output file>)
-define get-source-specials
-$(SED) \
--e '/^%%[[:space:]]*\([^%].*\)[[:space:]]*$$/{' \
--e ' s//\1/' \
--e ' s/[[:space:]]//g' \
--e ' /BEAMER/{' \
--e ' /BEAMERLARGE/!d' \
--e ' s/.*/BEAMER/' \
--e ' }' \
--e ' p' \
--e ' d' \
--e '}' \
--e '/\\documentclass[^{]*{.*}/b procclass' \
--e '/\\documentclass/,/}/{' \
--e ' s/%.*//' \
--e ' H' \
--e ' /}/{' \
--e ' s/.*//' \
--e ' x' \
--e ' b procclass' \
--e ' }' \
--e ' d' \
--e '}' \
--e 'd' \
--e ':procclass' \
--e 's/\\documentclass//' \
--e 's/[][]//g' \
--e 's/{.*}//' \
--e 's/[[:cntrl:][:space:]]*//g' \
--e 's/,/ /g' \
--e 's/^/ /' \
--e 's/$$/ /' \
--e '/.* \([[:alnum:]]\{1,\}\)paper .*/{' \
--e ' h' \
--e ' s//PAPERSIZE=\1/' \
--e ' p' \
--e ' g' \
--e '}' \
--e '/.* landscape .*/{' \
--e ' h' \
--e ' s//ORIENTATION=landscape/' \
--e ' p' \
--e ' g' \
--e '}' \
--e 'd' \
-$1 > '$2'
-endef
-
-# Checks for build failure due to pstex inclusion, and gives instructions.
-#
-# $(call die-on-pstexs,<parsed file>)
-define die-on-pstexs
-if $(EGREP) -q '^! LaTeX Error: File .*\.pstex.* not found' $1; then \
- $(ECHO) "$(C_ERROR)Missing pstex_t file(s)$(C_RESET)"; \
- $(ECHO) "$(C_ERROR)Please run$(C_RESET)"; \
- $(ECHO) "$(C_ERROR) make all-pstex$(C_RESET)"; \
- $(ECHO) "$(C_ERROR)before proceeding.$(C_RESET)"; \
- exit 1; \
-fi
-endef
-
-# Checks for the use of import.sty and bails - we don't support subdirectories
-#
-# $(call die-on-import-sty,<log file>)
-define die-on-import-sty
-if $(EGREP) -s '/import.sty\)' '$1'; then \
- $(ECHO) "$(C_ERROR)import.sty is not supported - included files must"; \
- $(ECHO) "$(C_ERROR)be in the same directory as the primary document$(C_RESET)"; \
- exit 1; \
-fi
-endef
-
-# Checks for build failure due to dot2tex, and gives instructions.
-#
-# $(call die-on-dot2tex,<parsed file>)
-define die-on-dot2tex
-if $(EGREP) -q ' LaTeX Error: File .*\.dot_t.* not found' $1; then \
- $(ECHO) "$(C_ERROR)Missing dot_t file(s)$(C_RESET)"; \
- $(ECHO) "$(C_ERROR)Please run$(C_RESET)"; \
- $(ECHO) "$(C_ERROR) make all-dot2tex$(C_RESET)"; \
- $(ECHO) "$(C_ERROR)before proceeding.$(C_RESET)"; \
- exit 1; \
-fi
-endef
-
-# Checks for the existence of a .aux file, and dies with an error message if it
-# isn't there. Note that we pass the file stem in, not the full filename,
-# e.g., to check for foo.aux, we call it thus: $(call die-on-no-aux,foo)
-#
-# $(call die-on-no-aux,<aux stem>)
-define die-on-no-aux
-if $(call test-not-exists,$1.aux); then \
- $(call colorize-latex-errors,$1.log); \
- $(ECHO) "$(C_ERROR)Error: failed to create $1.aux$(C_RESET)"; \
- exit 1; \
-fi
-endef
-
-# Outputs all index files to stdout. Arg 1 is the source file stem, arg 2 is
-# the list of targets for the discovered dependency.
-#
-# $(call get-log-index,<log file stem>,<target files>)
-define get-log-index
-$(SED) \
--e 's/^No file \(.*\.ind\)\.$$/TARGETS=\1/' \
--e 's/^No file \(.*\.[gn]ls\)\.$$/TARGETS=\1/' \
--e 's/[[:space:]]/\\&/g' \
--e '/^TARGETS=/{' \
--e ' h' \
--e ' s!^TARGETS=!$2: !p' \
--e ' g' \
--e ' s!^TARGETS=\(.*\)!\1: $1.tex!p' \
--e '}' \
--e 'd' \
-'$1.log' | $(SORT) | $(UNIQ)
-endef
-
-
-# Outputs all bibliography files to stdout. Arg 1 is the source stem, arg 2 is
-# a list of targets for each dependency found.
-#
-# The script kills all lines that do not contain bibdata. Remaining lines have
-# the \bibdata macro and delimiters removed to create a dependency list. A
-# trailing comma is added, then all adjacent commas are collapsed into a single
-# comma. Then commas are replaced with the string .bib[space], and the
-# trailing space is killed off. Finally, all filename spaces are escaped.
-# This produces a list of space-delimited .bib filenames, which is what the
-# make dep file expects to see.
-#
-# Note that we give kpsewhich a bogus argument so that a failure of sed to
-# produce output will not cause an error.
-#
-# $(call get-bibs,<aux file>,<targets>)
-define get-bibs
-$(SED) \
--e '/^\\bibdata/!d' \
--e 's/\\bibdata{\([^}]*\)}/\1,/' \
--e 's/,\{2,\}/,/g' \
--e 's/[[:space:]]/\\&/g' \
--e 's/,/.bib /g' \
--e 's/ \{1,\}$$//' \
-'$1' | $(XARGS) $(KPSEWHICH) '#######' | \
-$(SED) \
--e 's!.*!$2: $$(call path-norm,&)!' | \
-$(SORT) | $(UNIQ)
-endef
-
-# Makes a an aux file that only has stuff relevant to the target in it
-# $(call make-auxtarget-file,<flattened-aux>,<new-aux>)
-define make-auxtarget-file
-$(SED) \
--e '/^\\newlabel/!d' \
-$1 > $2
-endef
-
-# Makes an aux file that only has stuff relevant to the bbl in it
-# $(call make-auxbbl-file,<flattened-aux>,<new-aux>)
-define make-auxbbl-file
-$(SED) \
--e '/^\\newlabel/d' \
-$1 > $2
-endef
-
-# Makes a .gpi.d file from a .gpi file
-# $(call make-gpi-d,<.gpi>,<.gpi.d>)
-define make-gpi-d
-$(ECHO) '# vim: ft=make' > $2; \
-$(ECHO) 'ifndef INCLUDED_$(call cleanse-filename,$2)' >> $2; \
-$(ECHO) 'INCLUDED_$(call cleanse-filename,$2) := 1' >> $2; \
-$(call get-gpi-deps,$1,$(addprefix $(2:%.gpi.d=%).,$(GPI_OUTPUT_EXTENSION) gpi.d)) >> $2; \
-$(ECHO) 'endif' >> $2;
-endef
-
-# Parse .gpi files for data and loaded dependencies, output to stdout
-#
-# The sed script here tries to be clever about obtaining valid
-# filenames from the gpi file. It assumes that the plot command starts its own
-# line, which is not too difficult a constraint to satisfy.
-#
-# This command script also generates 'include' directives for every 'load'
-# command in the .gpi file. The load command must appear on a line by itself
-# and the file it loads must have the suffix .gpi. If you don't want it to be
-# compiled when running make graphics, then give it a suffix of ._include_.gpi.
-#
-# $(call get-gpi-deps,<gpi file>,<targets>)
-define get-gpi-deps
-$(SED) \
--e '/^[[:space:]]*s\{0,1\}plot/,/[^\\]$$/{' \
--e ' H' \
--e ' /[^\\]$$/{' \
--e ' s/.*//' \
--e ' x' \
--e ' s/\\\{0,1\}\n//g' \
--e ' s/^[[:space:]]*s\{0,1\}plot[[:space:]]*\(\[[^]]*\][[:space:]]*\)*/,/' \
--e ' s/[[:space:]]*\(['"'"'\'"'"''"'"'"][^'"'"'\'"'"''"'"'"]*['"'"'\'"'"''"'"'"]\)\{0,1\}[^,]*/\1/g' \
--e ' s/,['"'"'\'"'"''"'"'"]-\{0,1\}['"'"'\'"'"''"'"'"]//g' \
--e ' s/[,'"'"'\'"'"''"'"'"]\{1,\}/ /g' \
--e ' s/.*:.*/$$(error Error: Filenames with colons are not allowed: &)/' \
--e ' s!.*!$2: &!' \
--e ' p' \
--e ' }' \
--e ' d' \
--e '}' \
--e 's/^[[:space:]]*load[[:space:]]*['"'"'\'"'"''"'"'"]\([^'"'"'\'"'"''"'"'"]*\.gpi\)['"'"'\'"'"''"'"'"].*$$/-include \1.d/p' \
--e 'd' \
-'$1'
-endef
-
-# Colorizes real, honest-to-goodness LaTeX errors that can't be overcome with
-# recompilation.
-#
-# Note that we only ignore file not found errors for things that we know how to
-# build, like graphics files.
-#
-# Also note that the output of this is piped through sed again to escape any
-# backslashes that might have made it through. This is to avoid sending things
-# like "\right" to echo, which interprets \r as LF. In bash, we could just do
-# ${var//\\/\\\\}, but in other popular sh variants (like dash), this doesn't
-# work.
-#
-# $(call colorize-latex-errors,<log file>)
-define colorize-latex-errors
-$(SED) \
--e '$${' \
--e ' /^$$/!{' \
--e ' H' \
--e ' s/.*//' \
--e ' }' \
--e '}' \
--e '/^$$/!{' \
--e ' H' \
--e ' d' \
--e '}' \
--e '/^$$/{' \
--e ' x' \
--e ' s/^\(\n\)\(.*\)/\2\1/' \
--e '}' \
--e '/^::P\(P\{1,\}\)::/{' \
--e ' s//::\1::/' \
--e ' G' \
--e ' h' \
--e ' d' \
--e '}' \
--e '/^::P::/{' \
--e ' s//::0::/' \
--e ' G' \
--e '}' \
--e 'b start' \
--e ':needonemore' \
--e 's/^/::P::/' \
--e 'G' \
--e 'h' \
--e 'd' \
--e ':needtwomore' \
--e 's/^/::PP::/' \
--e 'G' \
--e 'h' \
--e 'd' \
--e ':needthreemore' \
--e 's/^/::PPP::/' \
--e 'G' \
--e 'h' \
--e 'd' \
--e ':start' \
--e '/^! LaTeX Error: File /{' \
--e ' s/\n//g' \
--e ' b needtwomore' \
--e '}' \
--e 's/^[^[:cntrl:]:]*:[[:digit:]]\{1,\}:/!!! &/' \
--e 's/^\(.*\n\)\([^[:cntrl:]:]*:[[:digit:]]\{1,\}: .*\)/\1!!! \2/' \
--e '/^!!! .*[[:space:][:cntrl:]]LaTeX[[:space:][:cntrl:]]Error:[[:space:][:cntrl:]]*File /{' \
--e ' s/\n//g' \
--e ' b needonemore' \
--e '}' \
--e '/^::0::! LaTeX Error: File .*/{' \
--e ' /\n\n$$/{' \
--e ' s/^::0:://' \
--e ' b needonemore' \
--e ' }' \
--e ' s/^::0::! //' \
--e ' s/^\(.*not found.\).*Enter file name:.*\n\(.*[[:digit:]]\{1,\}\): Emergency stop.*/\2: \1/' \
--e ' b error' \
--e '}' \
--e '/^::0::!!! .*LaTeX Error: File .*/{' \
--e ' /\n\n$$/{' \
--e ' s/^::0:://' \
--e ' b needonemore' \
--e ' }' \
--e ' s/::0::!!! //' \
--e ' /File .*\.e\{0,1\}ps'"'"' not found/b skip' \
--e ' /could not locate.*any of these extensions:/{' \
--e ' b skip' \
--e ' }' \
--e ' s/\(not found\.\).*/\1/' \
--e ' s/^/!!! /' \
--e ' b error' \
--e '}' \
--e '/^\(.* LaTeX Error: Missing .begin.document.\.\).*/{' \
--e ' s//\1 --- Are you trying to build an include file?/' \
--e ' b error' \
--e '}' \
--e '/.*\(!!! .*Undefined control sequence\)[^[:cntrl:]]*\(.*\)/{' \
--e ' s//\1: \2/' \
--e ' s/\nl\.[[:digit:]][^[:cntrl:]]*\(\\[^\\[:cntrl:]]*\).*/\1/' \
--e ' b error' \
--e '}' \
--e '/^\(!pdfTeX error:.*\)s*/{' \
--e ' b error' \
--e '}' \
--e '/.*\(!!! .*\)/{' \
--e ' s//\1/' \
--e ' s/[[:cntrl:]]//' \
--e ' s/[[:cntrl:]]$$//' \
--e ' /Cannot determine size of graphic .*(no BoundingBox)/b skip' \
--e ' b error' \
--e '}' \
--e ':skip' \
--e 'd' \
--e ':error' \
--e 's/^!\(!! \)\{0,1\}\(.*\)/$(C_ERROR)\2$(C_RESET)/' \
--e 'p' \
--e 'd' \
-'$1' | $(SED) -e 's/\\\\/\\\\\\\\/g'
-endef
-
-# Colorize Makeindex errors
-define colorize-makeindex-errors
-$(SED) \
--e '/^!! /{' \
--e ' N' \
--e ' s/^.*$$/$(C_ERROR)&$(C_RESET)/' \
--e ' p' \
--e '}' \
--e 'd' \
-'$1'
-endef
-
-# Colorize xindy errors
-# $(call colorize-xindy-errors,<log file>)
-define colorize-xindy-errors
-$(SED) \
--e 's/^xindy:.*/$(C_ERROR)&$(C_RESET)/p' \
--e 'd' \
-'$1'
-endef
-
-# Colorize epstopdf errors
-#
-# $(call colorize-epstopdf-errors,<log file>)
-define colorize-epstopdf-errors
-$(SED) \
--e '/^Error:/,/^Execution stack:/{' \
--e ' /^Execution stack:/d' \
--e ' s/.*/$(C_ERROR)&$(C_RESET)/' \
--e ' p' \
--e '}' \
--e 'd' \
-'$1'
-endef
-
-# Colorize GNUplot errors
-#
-# $(call colorize-gnuplot-errors,<log file>)
-define colorize-gnuplot-errors
-$(SED) \
--e '/, line [0-9]*:/!{' \
--e ' H' \
--e ' x' \
--e ' s/.*\n\(.*\n.*\)$$/\1/' \
--e ' x' \
--e '}' \
--e '/, line [0-9]*:/{' \
--e ' H' \
--e ' /unknown.*terminal type/{' \
--e ' s/.*/--- Try changing the GNUPLOT_OUTPUT_EXTENSION variable to '"'"'eps'"'"'./' \
--e ' H' \
--e ' }' \
--e ' /gpihead/{' \
--e ' s/.*/--- This could be a Makefile bug - contact the maintainer./' \
--e ' H' \
--e ' }' \
--e ' g' \
--e ' s/.*/$(C_ERROR)&$(C_RESET)/' \
--e ' p' \
--e '}' \
--e '/^gnuplot>/,/^$$/{' \
--e ' s/^gnuplot.*/$(C_ERROR)&/' \
--e ' s/^$$/$(C_RESET)/' \
--e ' p' \
--e '}' \
--e 'd' \
-$1
-endef
-
-# Colorize GraphViz errors
-#
-# $(call colorize-dot-errors,<log file>)
-define colorize-dot-errors
-$(SED) \
--e 's/.*not found.*/$(C_ERROR)&$(C_RESET)/p' \
--e '/^Error:/,/context:/s/.*/$(C_ERROR)&$(C_RESET)/p' \
--e 's/^Warning:.*/$(C_WARNING)&$(C_RESET)/p' \
--e 'd' \
-'$1'
-endef
-
-# Get all important .aux files from the top-level .aux file and merges them all
-# into a single file, which it outputs to stdout.
-# It does this by finding all \input commands and creating a new sed script
-# that reads those files inline when it encounters one.
-# It then runs that sed script, generating a flattened aux file, and
-# then it cleans up the flattened file by removing some crufty things.
-#
-# $(call flatten-aux,<toplevel aux>,<output file>)
-define flatten-aux
-$(SED) \
--e '/\\@input{\(.*\)}/{' \
--e ' s//\1/' \
--e ' s![.:]!\\&!g' \
--e ' h' \
--e ' s!.*!\\:\\\\@input{&}:{!' \
--e ' p' \
--e ' x' \
--e ' s/\\././g' \
--e ' s/.*/r &/p' \
--e ' s/.*/d/p' \
--e ' s/.*/}/p' \
--e ' d' \
--e '}' \
--e 'd' \
-'$1' > "$1.$$$$.sed.make"; \
-$(SED) -f "$1.$$$$.sed.make" '$1' > "$1.$$$$.make"; \
-$(SED) \
--e '/^\\relax/d' \
--e '/^\\bibcite/d' \
--e 's/^\(\\newlabel{[^}]\{1,\}}\).*/\1/' \
-"$1.$$$$.make" | $(SORT) > '$2'; \
-$(call remove-temporary-files,$1.$$$$.make $1.$$$$.sed.make)
-endef
-
-# Generate pdf from postscript
-#
-# Note that we don't just call ps2pdf, since there are so many versions of that
-# script on various systems. Instead, we call the postscript interpreter
-# directly.
-#
-# $(call ps2pdf,infile,outfile,[embed fonts])
-define ps2pdf
- $(GS) \
- -dSAFER -dCompatibilityLevel=$(PS_COMPATIBILITY) \
- $(if $3,$(PS_EMBED_OPTIONS)) \
- -q -dNOPAUSE -dBATCH \
- -sDEVICE=pdfwrite -sstdout=%stderr \
- '-sOutputFile=$2' \
- -dSAFER -dCompatibilityLevel=$(PS_COMPATIBILITY) \
- $(if $3,$(PS_EMBED_OPTIONS)) \
- -c .setpdfwrite \
- -f '$1'
-endef
-
-# Colorize LaTeX output.
-color_tex := \
-$(SED) \
--e '$${' \
--e ' /^$$/!{' \
--e ' H' \
--e ' s/.*//' \
--e ' }' \
--e '}' \
--e '/^$$/!{' \
--e ' H' \
--e ' d' \
--e '}' \
--e '/^$$/{' \
--e ' x' \
--e ' s/^\n//' \
--e ' /Output written on /{' \
--e ' s/.*Output written on \([^(]*\) (\([^)]\{1,\}\)).*/Success! Wrote \2 to \1/' \
--e ' s/[[:digit:]]\{1,\}/$(C_PAGES)&$(C_RESET)/g' \
--e ' s/Success!/$(C_SUCCESS)&$(C_RESET)/g' \
--e ' s/to \(.*\)$$/to $(C_SUCCESS)\1$(C_RESET)/' \
--e ' b end' \
--e ' }' \
--e ' / *LaTeX Error:.*/{' \
--e ' s/.*\( *LaTeX Error:.*\)/\1/' \
--e ' b error' \
--e ' }' \
--e ' /^[^[:cntrl:]:]*:[[:digit:]]\{1,\}:/b error' \
--e ' /.*Warning:.*/{' \
--e ' s//$(C_WARNING)&$(C_RESET)/' \
--e ' b end' \
--e ' }' \
--e ' /Underfull.*/{' \
--e ' s/.*\(Underfull.*\)/$(C_UNDERFULL)\1$(C_RESET)/' \
--e ' b end' \
--e ' }' \
--e ' /Overfull.*/{' \
--e ' s/.*\(Overfull.*\)/$(C_OVERFULL)\1$(C_RESET)/' \
--e ' b end' \
--e ' }' \
--e ' d' \
--e ' :error' \
--e ' s/.*/$(C_ERROR)&$(C_RESET)/' \
--e ' b end' \
--e ' :end' \
--e ' G' \
--e '}'
-
-# Colorize BibTeX output.
-color_bib := \
-$(SED) \
--e 's/^Warning--.*/$(C_WARNING)&$(C_RESET)/' \
--e 't' \
--e '/---/,/^.[^:]/{' \
--e ' H' \
--e ' /^.[^:]/{' \
--e ' x' \
--e ' s/\n\(.*\)/$(C_ERROR)\1$(C_RESET)/' \
--e ' p' \
--e ' s/.*//' \
--e ' h' \
--e ' d' \
--e ' }' \
--e ' d' \
--e '}' \
--e '/(.*error.*)/s//$(C_ERROR)&$(C_RESET)/' \
--e 'd'
-
-# Make beamer output big enough to print on a full page. Landscape doesn't
-# seem to work correctly.
-enlarge_beamer = $(PSNUP) -l -1 -W128mm -H96mm -pletter
-
-# $(call test-run-again,<source stem>)
-define test-run-again
-$(EGREP) '^(.*Rerun .*|No file $1\.[^.]+\.)$$' $1.log \
-| $(EGREP) -q -v '^(Package: rerunfilecheck.*Rerun checks for auxiliary files.*)$$'
-endef
-
-# This tests whether the build target commands should be run at all, from
-# viewing the log file.
-# $(call test-log-for-need-to-run,<source stem>)
-define test-log-for-need-to-run
-$(SED) \
--e '/^No file $(call escape-fname-regex,$1)\.aux\./d' \
-$1.log \
-| $(EGREP) '^(.*Rerun .*|No file $1\.[^.]+\.|No file .+\.tex\.|LaTeX Warning: File.*)$$' \
-| $(EGREP) -q -v '^(Package: rerunfilecheck.*Rerun checks for auxiliary files.*)$$'
-endef
-
-# LaTeX invocations
-#
-# Note that we use
-#
-# -recorder: generates .fls files for things that are input and output
-# -jobname: to make sure that .fls files are named after the source that created them
-# -file-line-error: to make sure that we have good line information for error output
-# -interaction=batchmode: so that we don't stop on errors (we'll parse logs for that)
-#
-# $(call latex,<tex file stem, e.g., $*>,[extra LaTeX args])
-define run-latex
-$(latex_build_program) -jobname='$1' -interaction=batchmode -file-line-error $(LATEX_OPTS) $(if $2,$2,) $1 > /dev/null; \
-$(call transcript,latex,$1)
-endef
-
-# $(call latex-color-log,<LaTeX stem>)
-latex-color-log = $(color_tex) $1.log
-
-# $(call run-makeindex,<input>,<output>,<log>,[.ist style file])
-define run-makeindex
-success=1; \
-if ! $(MAKEINDEX) -q $1 -t $3 -o $2 $(if $4,-s $4,) > /dev/null || $(EGREP) -q '^!!' $3; \
-then \
- $(call colorize-makeindex-errors,$3); \
- $(RM) -f '$2'; \
- success=0; \
- $(call transcript,makeindex,$1); \
-fi; \
-[ "$$success" = "1" ] && $(sh_true) || $(sh_false);
-endef
-
-# $(call run-xindy,<input>,<output>,<module>,<log>)
-define run-xindy
-success=1; \
-if ! $(XINDY) -q -o $2 -L $(XINDYLANG) -C $(XINDYENC) -I xindy -M $3 -t $4 $1 > /dev/null || $(EGREP) -q '^xindy:' $4; then \
- $(call colorize-xindy-errors,$4); \
- $(RM) -f '$2'; \
- success=0; \
- $(call transcript,xindy,$1); \
-fi; \
-[ "$$success" = "1" ] && $(sh_true) || $(sh_false);
-endef
-
-# This runs the given script to generate output, and it uses MAKE_RESTARTS to
-# ensure that it never runs it more than once for a particular root make
-# invocation.
-#
-# $(call run-script,<interpreter>,<input>,<output>)
-define run-script
-$(call test-not-exists,$2.cookie) && $(ECHO) "restarts=$(RESTARTS)" \
- > $2.cookie && $(ECHO) "level=$(MAKELEVEL)" >> $2.cookie; \
-restarts=`$(SED) -n -e 's/^restarts=//p' $2.cookie`; \
-level=`$(SED) -n -e 's/^level=//p' $2.cookie`; \
-if $(EXPR) $(MAKELEVEL) '<=' $$level '&' $(RESTARTS) '<=' $$restarts >/dev/null; then \
- $(call echo-build,$2,$3,$(RESTARTS)-$(MAKELEVEL)); \
- $1 '$2' '$3'; \
- $(ECHO) "restarts=$(RESTARTS)" > '$2.cookie'; \
- $(ECHO) "level=$(MAKELEVEL)" >> '$2.cookie'; \
-fi
-endef
-
-# BibTeX invocations
-#
-# $(call run-bibtex,<tex stem>)
-run-bibtex = $(BIBTEX) $1 | $(color_bib); $(call transcript,bibtex,$1)
-
-# $(call convert-eps-to-pdf,<eps file>,<pdf file>,[gray])
-# Note that we don't use the --filter flag because it has trouble with bounding boxes that way.
-define convert-eps-to-pdf
-$(if $3,$(CAT) '$1' | $(call kill-ps-color) > '$1.cookie',$(CP) '$1' '$1.cookie'); \
-$(EPSTOPDF) '$1.cookie' --outfile='$2' > $1.log; \
-$(call colorize-epstopdf-errors,$1.log);
-endef
-
-# $(call default-gpi-fontsize,<output file>)
-#
-# Find the default fontsize given the *output* file (it is based on the output extension)
-#
-default-gpi-fontsize = $(if $(filter %.pdf,$1),$(DEFAULT_GPI_PDF_FONTSIZE),$(DEFAULT_GPI_EPS_FONTSIZE))
-
-# $(call gpi-fontsize,<gpi file>,<output file>)
-#
-# Find out what the gnuplot fontsize should be. Tries, in this order:
-# - ##FONTSIZE comment in gpi file
-# - ##FONTSIZE comment in global gpi file
-# - default fontsize based on output type
-define gpi-fontsize
-$(strip $(firstword \
- $(shell $(SED) -e 's/^\#\#FONTSIZE=\([[:digit:]]\{1,\}\)/\1/p' -e 'd' $1 $(strip $(gpi_global))) \
- $(call default-gpi-fontsize,$2)))
-endef
-
-# $(call gpi-monochrome,<gpi file>,[gray])
-define gpi-monochrome
-$(strip $(if $2,monochrome,$(if $(shell $(EGREP) '^\#\#[[:space:]]*GRAY[[:space:]]*$$' $1 $(gpi_global)),monochrome,color)))
-endef
-
-# $(call gpi-font-entry,<output file>,<fontsize>)
-#
-# Get the font entry given the output file (type) and the font size. For PDF
-# it uses fsize or font, for eps it just uses the bare number.
-gpi-font-entry = $(if $(filter %.pdf,$1),$(subst FONTSIZE,$2,$(GPI_FSIZE_SYNTAX)),$2)
-
-# $(call gpi-terminal,<gpi file><output file>,[gray])
-#
-# Get the terminal settings for a given gpi and its intended output file
-define gpi-terminal
-$(if $(filter %.pdf,$2),pdf enhanced,postscript enhanced eps) \
-$(call gpi-font-entry,$2,$(call gpi-fontsize,$1,$2)) \
-$(call gpi-monochrome,$1,$3)
-endef
-
-# $(call gpi-embed-pdf-fonts,<input file>,<output file>)
-#
-define gpi-embed-pdf-fonts
-$(GS) \
- -q \
- -dSAFER \
- -dNOPAUSE \
- -dBATCH \
- -sDEVICE=$(if $(filter pdf,$(GPI_OUTPUT_EXTENSION)),pdfwrite,pswrite) \
- -sOutputFile='$2' \
- -sstdout=%stderr \
- -dCompatibilityLevel=1.5 \
- -dPDFSETTINGS=/prepress \
- -c .setpdfwrite \
- -f '$1'
-endef
-
-# $(call convert-gpi,<gpi file>,<output file>,[gray])
-#
-define convert-gpi
-$(ECHO) 'set terminal $(call gpi-terminal,$1,$2,$3)' > $1head.make; \
-$(ECHO) 'set output "$2"' >> $1head.make; \
-$(if $(gpi_global),$(CAT) $(gpi_global) >> $1head.make;,) \
-fnames='$1head.make $1';\
-$(if $(gpi_sed),\
- $(SED) -f '$(gpi_sed)' $$fnames > $1.temp.make; \
- fnames=$1.temp.make;,\
-) \
-success=1; \
-if ! $(GNUPLOT) $$fnames 2>$1.log; then \
- $(call colorize-gnuplot-errors,$1.log); \
- success=0; \
-elif [ x"$(suffix $2)" = x".pdf" ]; then \
- if ! $(call gpi-embed-pdf-fonts,$2,$2.embed.tmp.make); then \
- success=0; \
- else \
- $(call move-if-exists,$2.embed.tmp.make,$2); \
- fi; \
-fi; \
-$(if $(gpi_sed),$(call remove-temporary-files,$1.temp.make);,) \
-$(call remove-temporary-files,$1head.make); \
-[ "$$success" = "1" ] && $(sh_true) || $(sh_false);
-endef
-
-# Creation of .eps files from .png files
-#
-# The intermediate step of PNM (using NetPBM) produces much nicer output than
-# ImageMagick's "convert" binary. I couldn't get the right combination of
-# flags to make it look nice, anyway.
-#
-# To handle gray scale conversion, we pipe things through ppmtopgm in the
-# middle.
-#
-# $(call convert-png,<png file>,<eps file>)
-define convert-png
-$(PNGTOPNM) "$1" \
- $(if $3,| $(PPMTOPGM),) \
- | $(PNMTOPS) -noturn \
- > "$2"
-endef
-
-# Creation of .eps files from .jpg/.jpeg files
-#
-# Thanks to brubakee for this solution.
-#
-# Uses Postscript level 2 to avoid file size bloat
-# $(call convert-jpg,<jpg file>,<eps file>)
-define convert-jpg
-$(CONVERT) $(if $3,-type Grayscale,) '$1' eps2:'$2'
-endef
-
-# Creation of .eps files from .fig files
-# $(call convert-fig,<fig file>,<output file>,[gray])
-convert-fig = $(FIG2DEV) -L $(if $(filter %.pdf,$2),pdf,eps) $(if $3,-N,) $1 $2
-
-# Creation of .pstex files from .fig files
-# $(call convert-fig-pstex,<fig file>,<pstex file>)
-convert-fig-pstex = $(FIG2DEV) -L pstex $1 $2 > /dev/null 2>&1
-
-# Creation of .pstex_t files from .fig files
-# $(call convert-fig-pstex-t,<fig file>,<pstex file>,<pstex_t file>)
-convert-fig-pstex-t = $(FIG2DEV) -L pstex_t -p $3 $1 $2 > /dev/null 2>&1
-
-# Creation of .dot_t files from .dot files
-# #(call convert-dot-tex,<dot file>,<dot_t file>)
-convert-dot-tex = $(DOT2TEX) '$1' > '$2'
-
-# Converts svg files into .eps files
-#
-# $(call convert-svg,<svg file>,<eps/pdf file>,[gray])
-convert-svg = $(INKSCAPE) --without-gui $(if $(filter %.pdf,$2),--export-pdf,--export-eps)='$2' '$1'
-
-# Converts xvg files into .eps files
-#
-# $(call convert-xvg,<xvg file>,<eps file>,[gray])
-convert-xvg = $(XMGRACE) '$1' -printfile - -hardcopy -hdevice $(if $3,-mono,) EPS > '$2'
-
-# Converts .eps.gz files into .eps files
-#
-# $(call convert-epsgz,<eps.gz file>,<eps file>,[gray])
-convert-epsgz = $(GUNZIP) -c '$1' $(if $3,| $(call kill-ps-color)) > '$2'
-
-# Generates a .bb file from a .eps file (sometimes latex really wants this)
-#
-# $(call eps-bb,<eps file>,<eps.bb file>)
-define eps-bb
-$(SED) \
--e '/^%%Title:/p' \
--e '/^%%Creator:/p' \
--e '/^%%BoundingBox:/p' \
--e '/^%%CreationDate:/p' \
--e '/^%%EndComments/{' \
--e ' d' \
--e ' q' \
--e '}' \
--e 'd' \
-$1 > "$2"
-endef
-
-# Converts .eps files into .eps files (usually a no-op, but can make grayscale)
-#
-# $(call convert-eps,<in file>,<out file>,[gray])
-convert-eps = $(if $3,$(call kill-ps-color) $1 > $2)
-
-# The name of the file containing special postscript commands for grayscale
-gray_eps_file := gray.eps.make
-
-# Changes sethsbcolor and setrgbcolor calls in postscript to always produce
-# grayscale. In general, this is accomplished by writing new versions of those
-# functions into the user dictionary space, which is looked up before the
-# global or system dictionaries (userdict is one of the permanent dictionaries
-# in postscript and is not read-only like systemdict).
-#
-# For setrgbcolor, the weighted average of the triple is computed and the
-# triple is replaced with three copies of that average before the original
-# procedure is called: .299R + .587G + .114B
-#
-# For sethsbcolor, the color is first converted to RGB, then to grayscale by
-# the new setrgbcolor operator as described above. Why is this done?
-# Because simply using the value component will tend to make pure colors
-# white, a very undesirable thing. Pure blue should not translate to white,
-# but to some level of gray. Conversion to RGB does the right thing. It's
-# messy, but it works.
-#
-# From
-# http://en.wikipedia.org/wiki/HSV_color_space#Transformation_from_HSV_to_RGB,
-# HSB = HSV (Value = Brightness), and the formula used to convert to RGB is
-# as follows:
-#
-# Hi = int(floor(6 * H)) mod 6
-# f = 6 * H - Hi
-# p = V(1-S)
-# q = V(1-fS)
-# t = V(1-(1-f)S)
-# if Hi = 0: R G B <-- V t p
-# if Hi = 1: R G B <-- q V p
-# if Hi = 2: R G B <-- p V t
-# if Hi = 3: R G B <-- p q V
-# if Hi = 4: R G B <-- t p V
-# if Hi = 5: R G B <-- V p q
-#
-# The messy stack-based implementation is below
-# $(call create-gray-eps-file,filename)
-define create-gray-eps-file
-$(ECHO) -n -e '\
-/OLDRGB /setrgbcolor load def\n\
-/setrgbcolor {\n\
- .114 mul exch\n\
- .587 mul add exch\n\
- .299 mul add\n\
- dup dup\n\
- OLDRGB\n\
-} bind def\n\
-/OLDHSB /sethsbcolor load def\n\
-/sethsbcolor {\n\
- 2 index % H V S H\n\
- 6 mul floor cvi 6 mod % Hi V S H\n\
- 3 index % H Hi V S H\n\
- 6 mul % 6H Hi V S H\n\
- 1 index % Hi 6H Hi V S H\n\
- sub % f Hi V S H\n\
- 2 index 1 % 1 V f Hi V S H\n\
- 4 index % S 1 V f Hi V S H\n\
- sub mul % p f Hi V S H\n\
- 3 index 1 % 1 V p f Hi V S H\n\
- 6 index % S 1 V p f Hi V S H\n\
- 4 index % f S 1 V p f Hi V S H\n\
- mul sub mul % q p f Hi V S H\n\
- 4 index 1 1 % 1 1 V q p f Hi V S H\n\
- 5 index % f 1 1 V q p f Hi V S H\n\
- sub % (1-f) 1 V q p f Hi V S H\n\
- 8 index % S (1-f) 1 V q p f Hi V S H\n\
- mul sub mul % t q p f Hi V S H\n\
- 4 -1 roll pop % t q p Hi V S H\n\
- 7 -2 roll pop pop % t q p Hi V\n\
- 5 -2 roll % Hi V t q p\n\
- dup 0 eq\n\
- {1 index 3 index 6 index}\n\
- {\n\
- dup 1 eq\n\
- {3 index 2 index 6 index}\n\
- {\n\
- dup 2 eq\n\
- {4 index 2 index 4 index}\n\
- {\n\
- dup 3 eq\n\
- {4 index 4 index 3 index}\n\
- {\n\
- dup 4 eq\n\
- {2 index 5 index 3 index}\n\
- {\n\
- dup 5 eq\n\
- {1 index 5 index 5 index}\n\
- {0 0 0}\n\
- ifelse\n\
- }\n\
- ifelse\n\
- }\n\
- ifelse\n\
- }\n\
- ifelse\n\
- }\n\
- ifelse\n\
- }\n\
- ifelse % B G R Hi V t q p\n\
- setrgbcolor\n\
- 5 {pop} repeat\n\
-} bind def\n'\
-> $1
-endef
-
-# This actually inserts the color-killing code into a postscript file
-# $(call kill-ps-color)
-define kill-ps-color
-$(SED) -e '/%%EndComments/r $(gray_eps_file)'
-endef
-
-# Converts graphviz .dot files into .eps files
-# Grayscale is not directly supported by dot, so we pipe it through fig2dev in
-# that case.
-# $(call convert-dot,<dot file>,<eps file>,<log file>,[gray])
-define convert-dot
-$(DOT) -Tps '$1' 2>'$3' $(if $4,| $(call kill-ps-color)) > $2; \
-$(call colorize-dot-errors,$3)
-endef
-
-# Convert DVI to Postscript
-# $(call make-ps,<dvi file>,<ps file>,<log file>,[<paper size>],[<beamer info>])
-make-ps = \
- $(DVIPS) -z -o '$2' $(if $(strip $4),-t$(strip $4),) '$1' \
- $(if $5,| $(enlarge_beamer)) > $3 2>&1
-
-# Convert Postscript to PDF
-# $(call make-pdf,<ps file>,<pdf file>,<log file>,<embed file>)
-make-pdf = \
- $(call ps2pdf,$1,$2,$(filter 1,$(shell $(CAT) '$4'))) > '$3' 2>&1
-
-# Display information about what is being done
-# $(call echo-build,<input file>,<output file>,[<run number>])
-echo-build = $(ECHO) "$(C_BUILD)= $1 --> $2$(if $3, ($3),) =$(C_RESET)"
-echo-graphic = $(ECHO) "$(C_GRAPHIC)= $1 --> $2 =$(C_RESET)"
-echo-dep = $(ECHO) "$(C_DEP)= $1 --> $2 =$(C_RESET)"
-
-# Display a list of something
-# $(call echo-list,<values>)
-echo-list = for x in $1; do $(ECHO) "$$x"; done
-
-#
-# DEFAULT TARGET
-#
-
-.PHONY: all
-all: $(default_pdf_targets) ;
-
-.PHONY: all-pdf
-all-pdf: $(default_pdf_targets) ;
-
-ifeq "$(strip $(BUILD_STRATEGY))" "latex"
-.PHONY: all-ps
-all-ps: $(default_ps_targets) ;
-
-.PHONY: all-dvi
-all-dvi: $(default_dvi_targets) ;
-endif
-
-#
-# VIEWING TARGET
-#
-.PHONY: show
-show: all
- $(QUIET)for x in $(default_pdf_targets); do \
- [ -e "$$x" ] && $(VIEW_PDF) $$x & \
- done
-
-#
-# INCLUDES
-#
-source_includes := $(addsuffix .d,$(source_stems_to_include))
-graphic_includes := $(addsuffix .gpi.d,$(graphic_stems_to_include))
-
-# Check the version of the makefile
-ifneq "" "$(filter 3.79 3.80,$(MAKE_VERSION))"
-$(warning $(C_WARNING)Your version of make is too old. Please upgrade.$(C_RESET))
-endif
-
-# Include only the dependencies used
-ifneq "" "$(source_includes)"
-include $(source_includes)$(call include-message,$(source_includes))
-endif
-ifneq "" "$(graphic_includes)"
-include $(graphic_includes)$(call include-message,$(graphic_includes))
-endif
-
-#
-# MAIN TARGETS
-#
-
-# Note that we don't just say %: %.pdf here - this can tend to mess up our
-# includes, which detect what kind of file we are asking for. For example,
-# asking to build foo.pdf is much different than asking to build foo when
-# foo.gpi exists, because we look through all of the goals for *.pdf that
-# matches *.gpi, then use that to determine which include files we need to
-# build.
-#
-# Thus, we invoke make recursively with better arugments instead, restarting
-# all of the appropriate machinery.
-.PHONY: $(default_stems_ss)
-$(default_stems_ss): %: %.pdf ;
-
-# This builds and displays the wanted file.
-.PHONY: $(addsuffix ._show,$(stems_ssg))
-$(addsuffix ._show,$(stems_ssg)): %._show: %.pdf
- $(QUIET)$(VIEW_PDF) $< &
-
-ifeq "$(strip $(BUILD_STRATEGY))" "latex"
-.SECONDARY: $(all_pdf_targets)
-%.pdf: %.ps %.embed.make
- $(QUIET)$(call echo-build,$<,$@)
- $(QUIET)$(call make-pdf,$<,$@.temp,$@.log,$*.embed.make); \
- if [ x"$$?" = x"0" ]; then \
- $(if $(VERBOSE),$(CAT) $@.log,:); \
- $(RM) -f '$@'; \
- $(MV) '$@.temp' '$@'; \
- $(TOUCH) '$@'; \
- $(call copy-with-logging,$@,$(BINARY_TARGET_DIR)); \
- else \
- $(CAT) $@.log; \
- $(call remove-temporary-files,'$@.temp'); \
- $(sh_false); \
- fi
-
-.SECONDARY: $(all_ps_targets)
-%.ps: %.dvi %.paper.make %.beamer.make
- $(QUIET)$(call echo-build,$<,$@)
- $(QUIET)$(call make-ps,$<,$@.temp,$@.log,\
- $(strip $(shell $(CAT) $*.paper.make)),\
- $(strip $(shell $(CAT) $*.beamer.make))); \
- if [ x"$$?" = x"0" ]; then \
- $(if $(VERBOSE),$(CAT) $@.log,:); \
- $(RM) -f '$@'; \
- $(MV) '$@.temp' '$@'; \
- $(TOUCH) '$@'; \
- $(call copy-with-logging,$@,$(BINARY_TARGET_DIR)); \
- else \
- $(CAT) $@.log; \
- $(call remove-temporary-files,'$@.temp'); \
- $(sh_false); \
- fi
-endif
-
-# Build the final target (dvi or pdf) file. This is a very tricky rule because
-# of the way that latex runs multiple times, needs graphics after the first run
-# (or maybe already has them), and relies on bibliographies or indices that may
-# not exist.
-#
-# Check the log for fatal errors. If they exist, colorize and bail.
-#
-# Create the .auxtarget.cookie file. (Needed for next time if not present)
-#
-# If any of the following are true, we must rebuild at least one time:
-#
-# * the .bbl was recently rebuilt
-#
-# check a cookie, then delete it
-#
-# * any of several output files was created or changed:
-#
-# check $*.run.cookie, then delete it
-#
-# * the .aux file changed in a way that necessitates attention
-#
-# Note that if the .auxtarget.make file doesn't exist, this means
-# that we are doing a clean build, so it doesn't figure into the
-# test for running again.
-#
-# compare against .auxtarget.make
-#
-# move if different, remove if not
-#
-# * the .log file has errors or warnings requiring at least one more run
-#
-# We use a loop over a single item to simplify the process of breaking
-# out when we find one of the conditions to be true.
-#
-# If we do NOT need to run latex here, then we move the $@.1st.make file
-# over to $@ because the target file has already been built by the first
-# dependency run and is valid.
-#
-# If we do, we delete that cookie file and do the normal multiple-runs
-# routine.
-#
-ifeq "$(strip $(BUILD_STRATEGY))" "latex"
-.SECONDARY: $(all_dvi_targets)
-endif
-%.$(build_target_extension): %.bbl %.aux %.$(build_target_extension).1st.make
- $(QUIET)\
- fatal=`$(call colorize-latex-errors,$*.log)`; \
- if [ x"$$fatal" != x"" ]; then \
- $(ECHO) "$$fatal"; \
- exit 1; \
- fi; \
- $(call make-auxtarget-file,$*.aux.make,$*.auxtarget.cookie); \
- run=0; \
- for i in 1; do \
- if $(call test-exists,$*.bbl.cookie); then \
- $(call set-run-reason,$*.bbl.cookie is present); \
- run=1; \
- break; \
- fi; \
- if $(call test-exists,$*.run.cookie); then \
- $(call set-run-reason,$*.run.cookie is present); \
- run=1; \
- break; \
- fi; \
- if $(call \
- test-exists-and-different,$*.auxtarget.cookie,$*.auxtarget.make);\
- then \
- $(call set-run-reason,$*.auxtarget.cookie differs from $*.auxtarget.make); \
- run=1; \
- break; \
- fi; \
- if $(call test-log-for-need-to-run,$*); then \
- $(call set-run-reason,$*.log indicated that this is necessary); \
- run=1; \
- break; \
- fi; \
- if $(call test-not-exists,$@.1st.make); then \
- $(call set-run-reason,$@.1st.make does not exist); \
- run=1; \
- break; \
- fi; \
- done; \
- $(call remove-temporary-files,$*.bbl.cookie $*.run.cookie); \
- $(MV) $*.auxtarget.cookie $*.auxtarget.make; \
- if [ x"$$run" = x"1" ]; then \
- $(call remove-files,$@.1st.make); \
- for i in 2 3 4 5; do \
- $(if $(findstring 3.79,$(MAKE_VERSION)),\
- $(call echo-build,$*.tex,$@,$(RESTARTS)-$$$$i),\
- $(call echo-build,$*.tex,$@,$(RESTARTS)-$$i)\
- ); \
- $(call run-latex,$*); \
- $(CP) '$*.log' '$*.'$(RESTARTS)-$$i'.log'; \
- if $(call test-run-again,$*); then \
- $(call set-run-reason,rerun requested by $*.log); \
- else \
- break; \
- fi; \
- done; \
- else \
- $(MV) '$@.1st.make' '$@'; \
- fi; \
- $(call copy-with-logging,$@,$(BINARY_TARGET_DIR)); \
- $(call latex-color-log,$*)
-
-# Build the .bbl file. When dependencies are included, this will (or will
-# not!) depend on something.bib, which we detect, acting accordingly. The
-# dependency creation also produces the %.auxbbl.make file. BibTeX is a bit
-# finicky about what you call the actual files, but we can rest assured that if
-# a .auxbbl.make file exists, then the .aux file does, as well. The
-# .auxbbl.make file is a cookie indicating whether the .bbl needs to be
-# rewritten. It only changes if the .aux file changes in ways relevant to .bbl
-# creation.
-#
-# Note that we do NOT touch the .bbl file if there is no need to
-# create/recreate it. We would like to leave existing files alone if they
-# don't need to be changed, thus possibly avoiding a rebuild trigger.
-%.bbl: %.auxbbl.make
- $(QUIET)\
- $(if $(filter %.bib,$^),\
- $(call echo-build,$(filter %.bib,$?) $*.aux,$@); \
- $(call set-run-reason,dependencies of $@ changed); \
- $(call run-bibtex,$*); \
- $(TOUCH) $@.cookie; \
- ) \
- if $(EGREP) -q 'bibstyle.(apacite|apacann|chcagoa|[^}]*annot)' '$*.aux'; then \
- $(call echo-build,** annotated extra latex **,output ignored,$(RESTARTS)-1); \
- $(call run-latex,$*); \
- $(CP) '$*.log' '$*.$(RESTARTS)-annotated.log'; \
- $(if $(filter %.bib,$^),\
- $(call echo-build,** annotated extra bibtex ** $(filter %.bib,$?) $*.aux,$@); \
- $(call run-bibtex,$*); \
- $(TOUCH) $@.cookie; \
- ) \
- $(call echo-build,** annotated extra latex **,output ignored,$(RESTARTS)-2); \
- $(call run-latex,$*); \
- fi
-
-# Create the index file - note that we do *not* depend on %.tex here, since
-# that unnecessarily restricts the kinds of indices that we can build to those
-# with exactly the same stem as the source file. Things like splitidx create
-# idx files with other names.
-#
-# Therefore, we add the .tex dependency in the sourcestem.d file in the call to
-# get index file dependencies from the logs.
-%.ind: %.idx
- $(QUIET)$(call echo-build,$<,$@)
- $(QUIET)$(call run-makeindex,$<,$@,$*.ilg)
-
-# Create a glossary file from a .ist file
-%.gls: %.glo %.tex %.ist
- $(QUIET)$(call echo-build,$<,$@)
- $(QUIET)$(call run-makeindex,$<,$@,$*.glg,$*.ist)
-
-# Create a glossary file from a glossary input formatted for xindy
-%.gls: %.glo %.tex %.xdy
- $(QUIET)$(call echo-build,$<,$@)
- $(QUIET)$(call run-xindy,$<,$@,$*,$*.glg)
-
-# Create the glossary file from a nomenclature file
-%.gls: %.glo %.tex $(call path-norm,$(shell $(KPSEWHICH) nomencl.ist || $(ECHO) nomencl.ist))
- $(QUIET)$(call echo-build,$<,$@)
- $(QUIET)$(call run-makeindex,$<,$@,$*.glg,nomencl.ist)
-
-# Create the nomenclature file
-%.nls: %.nlo %.tex $(call path-norm,$(shell $(KPSEWHICH) nomencl.ist || $(ECHO) nomencl.ist))
- $(QUIET)$(call echo-build,$<,$@)
- $(QUIET)$(call run-makeindex,$<,$@,$*.nlg,nomencl.ist)
-
-# Precompile the format file
-%.fmt: %.tex
- $(QUIET)$(call echo-build,$<,$@)
- $(QUIET)\
- $(call run-latex,$*,-ini "&$(latex_build_program) $*.tex\dump"); \
- fatal=`$(call colorize-latex-errors,$*.log)`; \
- if [ x"$$fatal" != x"" ]; then \
- $(ECHO) "$$fatal"; \
- exit 1; \
- fi;
-
-# SCRIPTED LaTeX TARGETS
-#
-# Keep the generated .tex files around for debugging if needed.
-.SECONDARY: $(all_tex_targets)
-
-%.tex:: %.tex.sh
- $(QUIET)$(call run-script,$(SHELL),$<,$@)
-
-%.tex:: %.tex.py
- $(QUIET)$(call run-script,$(PYTHON),$<,$@)
-
-%.tex:: %.tex.pl
- $(QUIET)$(call run-script,$(PERL),$<,$@)
-
-%.tex:: %.rst $(RST_STYLE_FILE)
- $(QUIET)\
- $(call run-script,$(RST2LATEX)\
- --documentoptions=letterpaper\
- $(if $(RST_STYLE_FILE),--stylesheet=$(RST_STYLE_FILE),),$<,$@)
-
-%.tex:: %.lhs
- $(QUIET)\
- function run_lhs2tex() { $(LHS2TEX) -o "$$2" "$$1"; }; \
- $(call run-script,run_lhs2tex,$<,$@)
-
-#
-# GRAPHICS TARGETS
-#
-.PHONY: all-graphics
-all-graphics: $(all_graphics_targets);
-
-ifeq "$(strip $(BUILD_STRATEGY))" "latex"
-.PHONY: all-pstex
-all-pstex: $(all_pstex_targets);
-endif
-
-.PHONY: all-dot2tex
-all-dot2tex: $(all_dot2tex_targets);
-
-.PHONY: show-graphics
-show-graphics: all-graphics
- $(VIEW_GRAPHICS) $(all_known_graphics)
-
-$(gray_eps_file):
- $(QUIET)$(call echo-build,$^,$@)
- $(QUIET)$(call create-gray-eps-file,$@)
-
-ifeq "$(strip $(BUILD_STRATEGY))" "pdflatex"
-%.pdf: %.eps $(if $(GRAY),$(gray_eps_file))
- $(QUIET)$(call echo-graphic,$^,$@)
- $(QUIET)$(call convert-eps-to-pdf,$<,$@,$(GRAY))
-
-ifeq "$(strip $(GPI_OUTPUT_EXTENSION))" "pdf"
-%.pdf: %.gpi %.gpi.d $(gpi_sed) $(gpi_global)
- $(QUIET)$(call echo-graphic,$^,$@)
- $(QUIET)$(call convert-gpi,$<,$@,$(GRAY))
-endif
-
-%.pdf: %.fig
- $(QUIET)$(call echo-graphic,$^,$@)
- $(QUIET)$(call convert-fig,$<,$@,$(GRAY))
-
-%.pdf: %.svg
- $(QUIET)$(call echo-graphic,$^,$@)
- $(QUIET)$(call convert-svg,$<,$@,$(GRAY))
-endif
-
-ifeq "$(strip $(BUILD_STRATEGY))" "xelatex"
-%.pdf: %.eps $(if $(GRAY),$(gray_eps_file))
- $(QUIET)$(call echo-graphic,$^,$@)
- $(QUIET)$(call convert-eps-to-pdf,$<,$@,$(GRAY))
-
-ifeq "$(strip $(GPI_OUTPUT_EXTENSION))" "pdf"
-%.pdf: %.gpi %.gpi.d $(gpi_sed) $(gpi_global)
- $(QUIET)$(call echo-graphic,$^,$@)
- $(QUIET)$(call convert-gpi,$<,$@,$(GRAY))
-endif
-
-%.pdf: %.fig
- $(QUIET)$(call echo-graphic,$^,$@)
- $(QUIET)$(call convert-fig,$<,$@,$(GRAY))
-
-endif
-
-
-# TODO: capture mpost output and display errors
-# TODO: figure out why pdf generation is erroring out (but working anyway)
-%.eps %.mps %.mpx %.log: %.mp
- $(QUIET)$(call echo-graphic,$^,$@)
- $(QUIET)$(MPOST) $*
- $(QUIET)$(call move-if-exists,$*.mps,$*.eps)
- $(QUIET)$(call move-if-exists,$*.log,$*.log.make)
- $(QUIET)$(call move-if-exists,$*.mpx,$*.mpx.make)
-
-%.eps: %.gpi %.gpi.d $(gpi_sed) $(gpi_global)
- $(QUIET)$(call echo-graphic,$^,$@)
- $(QUIET)$(call convert-gpi,$<,$@,$(GRAY))
-
-%.eps: %.fig
- $(QUIET)$(call echo-graphic,$^,$@)
- $(QUIET)$(call convert-fig,$<,$@,$(GRAY))
-
-%.eps: %.dot $(if $(GRAY),$(gray_eps_file))
- $(QUIET)$(call echo-graphic,$^,$@)
- $(QUIET)$(call convert-dot,$<,$@,$<.log,$(GRAY))
-
-%.eps: %.xvg $(if $(GRAY),$(gray_eps_file))
- $(QUIET)$(call echo-graphic,$^,$@)
- $(QUIET)$(call convert-xvg,$<,$@,$(GRAY))
-
-ifneq "$(default_graphic_extension)" "pdf"
-# We have a perfectly good build rule for svg to pdf, so we eliminate this to
-# avoid confusing make (it sometimes chooses to go svg -> eps -> pdf).
-%.eps: %.svg $(if $(GRAY),$(gray_eps_file))
- $(QUIET)$(call echo-graphic,$^,$@)
- $(QUIET)$(call convert-svg,$<,$@,$(GRAY))
-
-# Similarly for these, we don't need eps if we have supported extensions
-# already.
-%.eps: %.jpg $(if $(GRAY),$(gray_eps_file))
- $(QUIET)$(call echo-graphic,$^,$@)
- $(QUIET)$(call convert-jpg,$<,$@,$(GRAY))
-
-%.eps: %.jpeg $(if $(GRAY),$(gray_eps_file))
- $(QUIET)$(call echo-graphic,$^,$@)
- $(QUIET)$(call convert-jpg,$<,$@,$(GRAY))
-
-%.eps: %.png $(if $(GRAY),$(gray_eps_file))
- $(QUIET)$(call echo-graphic,$^,$@)
- $(QUIET)$(call convert-png,$<,$@,$(GRAY))
-endif
-
-%.eps.bb: %.eps
- $(QUIET)$(call echo-graphic,$^,$@)
- $(QUIET)$(call eps-bb,$<,$@)
-
-%.eps: %.eps.gz $(if $(GRAY),$(gray_eps_file))
- $(QUIET)$(call echo-graphic,$^,$@)
- $(QUIET)$(call convert-epsgz,$<,$@,$(GRAY))
-
-%.pstex: %.fig
- $(QUIET)$(call echo-graphic,$^,$@)
- $(QUIET)$(call convert-fig-pstex,$<,$@,$(GRAY))
-
-%.pstex_t: %.fig %.pstex
- $(QUIET)$(call echo-graphic,$^,$@)
- $(QUIET)$(call convert-fig-pstex-t,$<,$@,$*.pstex,$(GRAY))
-
-%.dot_t: %.dot
- $(QUIET)$(call echo-graphic,$^,$@)
- $(QUIET)$(call convert-dot-tex,$<,$@)
-
-#
-# DEPENDENCY-RELATED TARGETS.
-#
-
-# Generate all of the information needed to get dependencies
-# As a side effect, this creates a .dvi or .pdf file (depending on the build
-# strategy). We need to be sure to remove it if there are errors. Errors can
-# take several forms and all of them are found within the log file:
-# * There was a LaTeX error
-# * A needed file was not found
-# * Cross references need adjustment
-#
-# Behavior:
-# This rule is responsible for generating the following:
-# %.aux
-# %.d
-# %.aux.make
-# %.(pdf|dvi).1st.make (the .pdf or .dvi output file, moved)
-#
-# Steps:
-#
-# Run latex
-# Move .pdf or .dvi somewhere else (make no judgements about success)
-# Flatten the .aux file into another file
-# Add source dependencies
-# Add graphic dependencies
-# Add bib dependencies
-#
-# Create cookies for various suffixes that may represent files that
-# need to be read by LaTeX in order for it to function properly.
-#
-# Note that if some of the dependencies are discovered because they turn
-# up missing in the log file, we really need the .d file to be reloaded.
-# Adding a sleep command helps with this. Otherwise make is extremely
-# nondeterministic, sometimes working, sometimes not.
-#
-# Usually we can force this by simply removing the generated pdf file and
-# not creating a .1st.make file..
-#
-%.$(build_target_extension).1st.make %.d %.aux %.aux.make %.fls: %.tex
- $(QUIET)$(call echo-build,$<,$*.d $*.$(build_target_extension).1st.make,$(RESTARTS)-1)
- $(QUIET)\
- $(call set-run-reason,need to build .d and .$(build_target_extension).1st.make); \
- $(call run-latex,$*,-recorder) || $(sh_true); \
- $(CP) '$*.log' '$*.$(RESTARTS)-1.log'; \
- $(call die-on-import-sty,$*.log); \
- $(call die-on-dot2tex,$*.log); \
- $(call die-on-no-aux,$*); \
- $(call flatten-aux,$*.aux,$*.aux.make); \
- $(ECHO) "# vim: ft=make" > $*.d; \
- $(ECHO) ".PHONY: $*._graphics" >> $*.d; \
- $(call get-inputs,$*.fls,$(addprefix $*.,aux aux.make d $(build_target_extension))) >> $*.d; \
- $(call get-format,$<,$(addprefix $*.,fls aux aux.make d $(build_target_extension) $(build_target_extension).1st.make)) >> $*.d; \
- $(call get-missing-inputs,$*.log,$(addprefix $*.,aux aux.make d $(build_target_extension))) >> $*.d; \
- $(ECHO) ".SECONDEXPANSION:" >> $*.d; \
- $(call get-graphics,$*) >> $*.d; \
- $(call get-log-index,$*,$(addprefix $*.,aux aux.make)) >> $*.d; \
- $(call get-bibs,$*.aux.make,$(addprefix $*.,bbl aux aux.make)) >> $*.d; \
- $(EGREP) -q "# MISSING stem" $*.d && $(SLEEP) 1 && $(RM) $*.pdf; \
- $(EGREP) -q "# MISSING format" $*.d && $(RM) $*.pdf; \
- $(call move-if-exists,$*.$(build_target_extension),$*.$(build_target_extension).1st.make); \
- for s in toc out lot lof lol nav; do \
- if [ -e "$*.$$s" ]; then \
- if ! $(DIFF) -q $*.$$s $*.$$s.make >/dev/null 2>&1; then \
- $(TOUCH) $*.run.cookie; \
- fi; \
- $(CP) $*.$$s $*.$$s.make; \
- fi; \
- done
-
-# This is a cookie that is updated if the flattened aux file has changed in a
-# way that affects the bibliography generation.
-.SECONDARY: $(addsuffix .auxbbl.make,$(stems_ssg))
-%.auxbbl.make: %.aux.make
- $(QUIET)\
- $(call make-auxbbl-file,$<,$@.temp); \
- $(call replace-if-different-and-remove,$@.temp,$@)
-
-# Build a dependency file for .gpi files. These often plot data files that
-# also reside in the directory, so if a data file changes, it's nice to know
-# about it. This also handles loaded .gpi files, whose filename should have
-# _include_. in it.
-%.gpi.d: %.gpi
- $(QUIET)$(call echo-build,$<,$@)
- $(QUIET)$(call make-gpi-d,$<,$@)
-
-# Get source specials, e.g., paper size and special %% comments.
-%.specials.make: %.tex
- $(QUIET)$(call get-source-specials,$<,$@)
-
-# Get info about whether to enlarge beamer postscript files (for use with
-# dvips, and requires a special comment in the source file).
-.SECONDARY: $(addsuffix .specials.make,$(all_stems_ss))
-%.beamer.make: %.specials.make
- $(QUIET)$(SED) -e 's/^BEAMER.*/BEAMER/p' -e 'd' '$<' > '$@'
-
-# Store the paper size for this document -- note that if beamer is used we set
-# it to the special BEAMER paper size. We only do this, however, if the
-# special comment exists, in which case we enlarge the output with psnup.
-#
-# The paper size is extracted from a documentclass attribute.
-%.paper.make: %.specials.make
- $(QUIET)$(SED) -e 's/^PAPERSIZE=//p' -e 'd' '$<' > '$@'
-
-# Store embedding instructions for this document using a special comment
-%.embed.make: %.specials.make
- $(QUIET)$(EGREP) '^NOEMBED$$' $< \
- && $(ECHO) '' > $@ \
- || $(ECHO) '1' > $@;
-
-#
-# HELPFUL PHONY TARGETS
-#
-
-.PHONY: _all_programs
-_all_programs:
- $(QUIET)$(ECHO) "== All External Programs Used =="
- $(QUIET)$(call output-all-programs)
-
-.PHONY: _check_programs
-_check_programs:
- $(QUIET)$(ECHO) "== Checking Makefile Dependencies =="; $(ECHO)
- $(QUIET) \
- allprogs=`\
- ($(call output-all-programs)) | \
- $(SED) \
- -e 's/^[[:space:]]*//' \
- -e '/^#/d' \
- -e 's/[[:space:]]*#.*//' \
- -e '/^=/s/[[:space:]]/_/g' \
- -e '/^[[:space:]]*$$/d' \
- -e 's/^[^=].*=[[:space:]]*\([^[:space:]]\{1,\}\).*$$/\\1/' \
- `; \
- spaces=' '; \
- for p in $${allprogs}; do \
- case $$p in \
- =*) $(ECHO); $(ECHO) "$$p";; \
- *) \
- $(ECHO) -n "$$p:$$spaces" | $(SED) -e 's/^\(.\{0,20\}\).*$$/\1/'; \
- loc=`$(WHICH) $$p`; \
- if [ x"$$?" = x"0" ]; then \
- $(ECHO) "$(C_SUCCESS)Found:$(C_RESET) $$loc"; \
- else \
- $(ECHO) "$(C_FAILURE)Not Found$(C_RESET)"; \
- fi; \
- ;; \
- esac; \
- done
-
-.PHONY: _check_gpi_files
-_check_gpi_files:
- $(QUIET)$(ECHO) "== Checking all .gpi files for common errors =="; \
- $(ECHO); \
- for f in $(files.gpi); do \
- result=`$(EGREP) '^([^#]*set terminal |set output )' $$f`; \
- $(ECHO) -n "$$f: "; \
- if [ x"$$result" = x"" ]; then \
- $(ECHO) "$(C_SUCCESS)Okay$(C_RESET)"; \
- else \
- $(ECHO) "$(C_FAILURE)Warning: Problematic commands:$(C_RESET)";\
- $(ECHO) "$(C_ERROR)$$result$(C_RESET)"; \
- fi; \
- done; \
- $(ECHO)
-
-.PHONY: _all_stems
-_all_stems:
- $(QUIET)$(ECHO) "== All Stems =="
- $(QUIET)$(call echo-list,$(sort $(default_stems_ss)))
-
-.PHONY: _includes
-_includes:
- $(QUIET)$(ECHO) "== Include Stems =="
- $(QUIET)$(ECHO) "=== Sources ==="
- $(QUIET)$(call echo-list,$(sort $(source_includes)))
- $(QUIET)$(ECHO) "=== Graphics ==="
- $(QUIET)$(call echo-list,$(sort $(graphic_includes)))
-
-.PHONY: _all_sources
-_all_sources:
- $(QUIET)$(ECHO) "== All Sources =="
- $(QUIET)$(call echo-list,$(sort $(all_files.tex)))
-
-.PHONY: _dependency_graph
-_dependency_graph:
- $(QUIET)$(ECHO) "/* LaTeX Dependency Graph */"
- $(QUIET)$(call output-dependency-graph)
-
-.PHONY: _show_dependency_graph
-_show_dependency_graph:
- $(QUIET)$(call output-dependency-graph,$(graph_stem).dot)
- $(QUIET)$(DOT) -Tps -o $(graph_stem).eps $(graph_stem).dot
- $(QUIET)$(VIEW_POSTSCRIPT) $(graph_stem).eps
- $(QUIET)$(call remove-temporary-files,$(graph_stem).*)
-
-.PHONY: _sources
-_sources:
- $(QUIET)$(ECHO) "== Sources =="
- $(QUIET)$(call echo-list,$(sort $(files.tex)))
-
-.PHONY: _source_gens
-_source_gens:
- $(QUIET)$(ECHO) "== Generated Sources =="
- $(QUIET)$(call echo-list,$(sort $(files_source_gen)))
-
-.PHONY: _scripts
-_scripts:
- $(QUIET)$(ECHO) "== Scripts =="
- $(QUIET)$(call echo-list,$(sort $(files_scripts)))
-
-.PHONY: _graphic_outputs
-_graphic_outputs:
- $(QUIET)$(ECHO) "== Graphic Outputs =="
- $(QUIET)$(call echo-list,$(sort $(all_graphics_targets)))
-
-.PHONY: _env
-_env:
-ifdef .VARIABLES
- $(QUIET)$(ECHO) "== MAKE VARIABLES =="
- $(QUIET)$(call echo-list,$(foreach var,$(sort $(.VARIABLES)),'$(var)'))
-endif
- $(QUIET)$(ECHO) "== ENVIRONMENT =="
- $(QUIET)$(ENV)
-
-#
-# CLEAN TARGETS
-#
-# clean-generated is somewhat unique - it relies on the .fls file being
-# properly built so that it can determine which of the files was generated, and
-# which was not. Expect it to silently fail if the .fls file is missing.
-#
-# This is used to, e.g., clean up index files that are generated by the LaTeX.
-.PHONY: clean-generated
-clean-generated:
- $(QUIET)$(call clean-files,$(foreach e,$(addsuffix .fls,$(all_stems_source)),\
- $(shell $(call get-generated-names,$e))))
-
-.PHONY: clean-deps
-clean-deps:
- $(QUIET)$(call clean-files,$(all_d_targets) *.make *.make.temp *.cookie)
-
-.PHONY: clean-tex
-clean-tex: clean-deps
- $(QUIET)$(call clean-files,$(rm_tex))
-
-.PHONY: clean-graphics
-# TODO: This *always* deletes pstex files, even if they were not generated by
-# anything.... In other words, if you create a pstex and pstex_t pair by hand
-# an drop them in here without the generating fig file, they will be deleted
-# and you won't get them back. It's a hack put in here because I'm not sure we
-# even want to keep pstex functionality, so my motivation is not terribly high
-# for doing it right.
-clean-graphics:
- $(QUIET)$(call clean-files,$(all_graphics_targets) *.gpi.d *.pstex *.pstex_t *.dot_t)
-
-.PHONY: clean-backups
-clean-backups:
- $(QUIET)$(call clean-files,$(backup_patterns) *.temp)
-
-.PHONY: clean-auxiliary
-clean-auxiliary:
- $(QUIET)$(call clean-files,$(graph_stem).*)
-
-.PHONY: clean-nographics
-clean-nographics: clean-tex clean-deps clean-backups clean-auxiliary ;
-
-.PHONY: clean
-clean: clean-generated clean-tex clean-graphics clean-deps clean-backups clean-auxiliary ;
-
-#
-# HELP TARGETS
-#
-
-.PHONY: help
-help:
- $(help_text)
-
-.PHONY: version
-version:
- $(QUIET)\
- $(ECHO) "$(fileinfo) Version $(version)"; \
- $(ECHO) "by $(author)"; \
-
-#
-# HELP TEXT
-#
-
-define help_text
-# $(fileinfo) Version $(version)
-#
-# by $(author)
-#
-# Generates a number of possible output files from a LaTeX document and its
-# various dependencies. Handles .bib files, \include and \input, and .eps
-# graphics. All dependencies are handled automatically by running LaTeX over
-# the source.
-#
-# USAGE:
-#
-# make [GRAY=1] [VERBOSE=1] [SHELL_DEBUG=1] <target(s)>
-#
-# STANDARD OPTIONS:
-# GRAY:
-# Setting this variable forces all recompiled graphics to be grayscale.
-# It is useful when creating a document for printing. The default is
-# to allow colors. Note that it only changes graphics that need to be
-# rebuilt! It is usually a good idea to do a 'make clean' first.
-#
-# VERBOSE:
-# This turns off all @ prefixes for commands invoked by make. Thus,
-# you get to see all of the gory details of what is going on.
-#
-# SHELL_DEBUG:
-# This enables the -x option for sh, meaning that everything it does is
-# echoed to stderr. This is particularly useful for debugging
-# what is going on in $$(shell ...) invocations. One of my favorite
-# debugging tricks is to do this:
-#
-# make -d SHELL_DEBUG=1 VERBOSE=1 2>&1 | less
-#
-# KEEP_TEMP:
-# When set, this allows .make and other temporary files to stick around
-# long enough to do some debugging. This can be useful when trying to
-# figure out why gnuplot is not doing the right things, for example
-# (e.g., look for *head.make).
-#
-# STANDARD AUXILIARY FILES:
-#
-# Variables.ini (formerly Makefile.ini, which still works)
-#
-# This file can contain variable declarations that override various
-# aspects of the makefile. For example, one might specify
-#
-# neverclean := *.pdf *.ps
-# onlysources.tex := main.tex
-# LATEX_COLOR_WARNING := 'bold red uline'
-#
-# And this would override the neverclean setting to ensure that pdf
-# and ps files always remain behind, set the makefile to treat all
-# .tex files that are not "main.tex" as includes (and therefore not
-# default targets). It also changes the LaTeX warning output to be
-# red, bold, and underlined.
-#
-# There are numerous variables in this file that can be overridden in
-# this way. Search for '?=' to find them all.
-#
-# The Variables.ini is imported before *anything else* is done, so go
-# wild with your ideas for changes to this makefile in there. It
-# makes it easy to test them before submitting patches.
-#
-# If you're adding rules or targets, however, see Targets.ini below.
-#
-# Targets.ini
-#
-# This is included much later in the makefile, after all variables and
-# targets are defined. This is where you would put new make rules,
-# e.g.,
-#
-# generated.tex: generating_script.weird_lang depA depB
-# ./generating_script.weird_lang > $$@
-#
-# In this file, you have access to all of the variables that the
-# makefile creates, like $$(onlysources.tex). While accessing those can
-# be somewhat brittle (they are implementation details and may change),
-# it is a great way to test your ideas when submitting feature requests.
-#
-# STANDARD ENVIRONMENT VARIABLES:
-#
-# LATEX_COLOR_WARNING '$(LATEX_COLOR_WARNING)'
-# LATEX_COLOR_ERROR '$(LATEX_COLOR_ERROR)'
-# LATEX_COLOR_UNDERFULL '$(LATEX_COLOR_UNDERFULL)'
-# LATEX_COLOR_OVERFULL '$(LATEX_COLOR_OVERFULL)'
-# LATEX_COLOR_PAGES '$(LATEX_COLOR_PAGES)'
-# LATEX_COLOR_BUILD '$(LATEX_COLOR_BUILD)'
-# LATEX_COLOR_GRAPHIC '$(LATEX_COLOR_GRAPHIC)'
-# LATEX_COLOR_DEP '$(LATEX_COLOR_DEP)'
-# LATEX_COLOR_SUCCESS '$(LATEX_COLOR_SUCCESS)'
-# LATEX_COLOR_FAILURE '$(LATEX_COLOR_FAILURE)'
-#
-# These may be redefined in your environment to be any of the following:
-#
-# black
-# red
-# green
-# yellow
-# blue
-# magenta
-# cyan
-# white
-#
-# Bold or underline may be used, as well, either alone or in combination
-# with colors:
-#
-# bold
-# uline
-#
-# Order is not important. You may want, for example, to specify:
-#
-# export LATEX_COLOR_SUCCESS='bold blue uline'
-#
-# in your .bashrc file. I don't know why, but you may want to.
-#
-# STANDARD TARGETS:
-#
-# all:
-# Make all possible documents in this directory. The documents are
-# determined by scanning for .tex and .tex.sh (described in more detail
-# later) and omitting any file that ends in ._include_.tex or
-# ._nobuild_.tex. The output is a set of .pdf files.
-#
-# If you wish to omit files without naming them with the special
-# underscore names, set the following near the top of the Makefile,
-# or (this is recommended) within a Makefile.ini in the same directory:
-#
-# includes.tex := file1.tex file2.tex
-#
-# This will cause the files listed to be considered as include files.
-#
-# If you have only few source files, you can set
-#
-# onlysources.tex := main.tex
-#
-# This will cause only the source files listed to be considered in
-# dependency detection. All other .tex files will be considered as
-# include files. Note that these options work for *any* source type,
-# so you could do something similar with includes.gpi, for example.
-# Note that this works for *any valid source* target. All of the
-# onlysources.* variables are commented out in the shipping version of
-# this file, so it does the right thing when they simply don't exist.
-# The comments are purely documentation. If you know, for example, that
-# file.mycoolformat is supported by this Makefile, but don't see the
-# "onlysources.mycoolformat" declared in the comments, that doesn't mean
-# you can't use it. Go ahead and set "onlysources.mycoolformat" and it
-# should do the right thing.
-#
-# show:
-# Builds and displays all documents in this directory. It uses the
-# environment-overridable value of VIEW_PDF (currently $(VIEW_PDF)) to
-# do its work.
-#
-# all-graphics:
-# Make all of the graphics in this directory.
-#
-# all-pstex (only for BUILD_STRATEGY=latex):
-# Build all fig files into pstex and pstex_t files. Gray DOES NOT WORK.
-#
-# all-gray-pstex (only for BUILD_STRATEGY=latex):
-# Build all fig files into grayscale pstex and pstex_t files.
-#
-# all-dot2tex:
-# Build all dot files into tex files.
-#
-# show-graphics:
-# Builds and displays all graphics in this directory. Uses the
-# environment-overridable value of VIEW_GRAPHICS (currently
-# $(VIEW_GRAPHICS)) to do its work.
-#
-# clean:
-# Remove ALL generated files, leaving only source intact.
-# This will *always* skip files mentioned in the "neverclean" variable,
-# either in this file or specified in Makefile.ini:
-#
-# neverclean := *.pdf *.ps
-#
-# The neverclean variable works on all "clean" targets below, as well.
-#
-# clean-graphics:
-# Remove all generated graphics files.
-#
-# clean-backups:
-# Remove all backup files: $(backup_patterns)
-# (XFig and other editors have a nasty habit of leaving them around)
-# Also removes Makefile-generated .temp files
-#
-# clean-tex:
-# Remove all files generated from LaTeX invocations except dependency
-# information. Leaves graphics alone.
-#
-# clean-deps:
-# Removes all auto-generated dependency information.
-#
-# clean-auxiliary:
-# Removes extra files created by various targets (like the dependency
-# graph output).
-#
-# clean-nographics:
-# Cleans everything *except* the graphics files.
-#
-# help:
-# This help text.
-#
-# version:
-# Version information about this LaTeX makefile.
-#
-# DEBUG TARGETS:
-#
-# _all_programs:
-# A list of the programs used by this makefile.
-#
-# _check_programs:
-# Checks your system for the needed software and reports what it finds.
-#
-# _check_gpi_files:
-# Checks the .gpi files in the current directory for common errors, such
-# as specification of the terminal or output file inside of the gpi file
-# itself.
-#
-# _dependency_graph:
-# Outputs a .dot file to stdout that represents a graph of LaTeX
-# dependencies. To see it, use the _show_dependency_graph target or
-# direct the output to a file, run dot on it, and view the output, e.g.:
-#
-# make _dependency_graph > graph.dot
-# dot -T ps -o graph.eps graph.dot
-# gv graph.eps
-#
-# _show_dependency_graph:
-# Makes viewing the graph simple: extracts, builds and displays the
-# dependency graph given in the _dependency_graph target using the value
-# of the environment-overridable VIEW_POSTSCRIPT variable (currently set
-# to $(VIEW_POSTSCRIPT)). The postscript viewer is used because it
-# makes it easier to zoom in on the graph, a critical ability for
-# something so dense and mysterious.
-#
-# _all_sources:
-# List all .tex files in this directory.
-#
-# _sources:
-# Print out a list of all compilable sources in this directory. This is
-# useful for determining what make thinks it will be using as the
-# primary source for 'make all'.
-#
-# _scripts:
-# Print out a list of scripts that make knows can be used to generate
-# .tex files (described later).
-#
-# _all_stems:
-# Print a list of stems. These represent bare targets that can be
-# executed. Listing <stem> as a bare target will produce <stem>.pdf.
-#
-# _includes:
-# A list of .d files that would be included in this run if _includes
-# weren't specified. This target may be used alone or in conjunction
-# with other targets.
-#
-# _graphic_outputs:
-# A list of all generated .eps files
-#
-# _env:
-# A list of environment variables and their values. If supported by
-# your version of make, also a list of variables known to make.
-#
-# FILE TARGETS:
-#
-# %, %.pdf:
-# Build a PDF file from the corresponding %.tex file.
-#
-# If BUILD_STRATEGY=pdflatex, then this builds the pdf directly.
-# Otherwise, it uses this old-school but effective approach:
-#
-# latex -> dvips -> ps2pdf
-#
-# The BUILD_STRATEGY can be overridden in Makefile.ini in the same
-# directory. The default is pdflatex.
-#
-# Reasons for using latex -> dvips include the "psfrag" package, and the
-# generation of postscript instead of PDF. Arguments for using pdflatex
-# include "new and shiny" and "better supported." I can't argue with
-# either of those, and supporting them both didn't turn out to be that
-# difficult, so there you have it. Choices.
-#
-# %._show:
-# A phony target that builds the pdf file and then displays it using the
-# environment-overridable value of VIEW_PDF ($(VIEW_PDF)).
-#
-# %._graphics:
-# A phony target that generates all graphics on which %.pdf (or %.dvi)
-# depends.
-#
-# %.ps (only for BUILD_STRATEGY=latex):
-# Build a Postscript file from the corresponding %.tex file.
-# This is done using dvips. Paper size is automatically
-# extracted from the declaration
-#
-# \documentclass[<something>paper]
-#
-# or it is the system default.
-#
-# If using beamer (an excellent presentation class), the paper
-# size is ignored. More on this later.
-#
-# %.dvi (only for BUILD_STRATEGY=latex):
-# Build the DVI file from the corresponding %.tex file.
-#
-# %.ind:
-# Build the index for this %.tex file.
-#
-# %.gls:
-# Build the nomenclature glossary for this %.tex file.
-#
-# %.nls:
-# Build the (newer) nomenclature file for this %.tex file.
-#
-# %.eps:
-# Build an eps file from one of the following file types:
-#
-# .dot : graphviz
-# .gpi : gnuplot
-# .fig : xfig
-# .xvg : xmgrace
-# .svg : scalable vector graphics (goes through inkscape)
-# .png : png (goes through NetPBM)
-# .jpg : jpeg (goes through ImageMagick)
-# .eps.gz : gzipped eps
-#
-# The behavior of this makefile with each type is described in
-# its own section below.
-#
-# %.pstex{,_t} (only for BUILD_STRATEGY=latex):
-# Build a .pstex_t file from a .fig file.
-#
-# FEATURES:
-#
-# Optional Binary Directory:
-# If you create the _out_ directory in the same place as the makefile,
-# it will automatically be used as a dumping ground for .pdf (or .dvi,
-# .ps, and .pdf) output files.
-#
-# Alternatively, you can set the BINARY_TARGET_DIR variable, either as a
-# make argument or in Makefile.ini, to point to your directory of
-# choice. Note that no pathname wildcard expansion is done in the
-# makefile, so make sure that the path is complete before going in
-# there. E.g., if you want to specify something in your home directory,
-# use $$HOME/ instead of ~/ so that the shell expands it before it gets
-# to the makefile.
-#
-# External Program Dependencies:
-# Every external program used by the makefile is represented by an
-# ALLCAPS variable at the top of this file. This should allow you to
-# make judgments about whether your system supports the use of this
-# makefile. The list is available in the ALL_PROGRAMS variable and,
-# provided that you are using GNU make 3.80 or later (or you haven't
-# renamed this file to something weird like "mylatexmakefile" and like
-# invoking it with make -f) can be viewed using
-#
-# make _all_programs
-#
-# Additionally, the availability of these programs can be checked
-# automatically for you by running
-#
-# make _check_programs
-#
-# The programs are categorized according to how important they are and
-# what function they perform to help you decide which ones you really
-# need.
-#
-# Colorized Output:
-# The output of commands is colorized to highlight things that are often
-# important to developers. This includes {underfull,overfull}
-# {h,v}boxes, general LaTeX Errors, each stage of document building, and
-# the number of pages in the final document. The colors are obtained
-# using 'tput', so colorization should work pretty well on any terminal.
-#
-# The colors can be customized very simply by setting any of the
-# LATEX_COLOR_<CONTEXT> variables in your environment (see above).
-#
-# Predecessors to TeX Files:
-# Given a target <target>, if no <target>.tex file exists but a
-# corresponding script or predecessor file exists, then appropriate
-# action will be taken to generate the tex file.
-#
-# Currently supported script or predecessor languages are:
-#
-# sh: %.tex.sh
-# perl: %.tex.pl
-# python: %.tex.py
-#
-# Calls the script using the appropriate interpreter, assuming that
-# its output is a .tex file.
-#
-# The script is called thus:
-#
-# <interpreter> <script file name> <target tex file>
-#
-# and therefore sees exactly one parameter: the name of the .tex
-# file that it is to create.
-#
-# Why does this feature exist? I ran into this while working on
-# my paper dissertation. I wrote a huge bash script that used a
-# lot of sed to bring together existing papers in LaTeX. It
-# would have been nice had I had something like this to make my
-# life easier, since as it stands I have to run the script and
-# then build the document with make. This feature provides hooks
-# for complicated stuff that you may want to do, but that I have
-# not considered. It should work fine with included dependencies,
-# too.
-#
-# Scripts are run every time make is invoked. Some trickery is
-# employed to make sure that multiple restarts of make don't cause
-# them to be run again.
-#
-# reST: %.rst
-#
-# Runs the reST to LaTeX converter to generate a .tex file
-# If it finds a file names _rststyle_._include_.tex, uses it as
-# the "stylesheet" option to rst2latex.
-#
-# Note that this does not track sub-dependencies in rst files. It
-# assumes that the top-level rst file will change if you want a
-# rebuild.
-#
-# literate Haskell: %.lhs
-#
-# Runs the lhs2tex program to generate a .tex file.
-#
-# Dependencies:
-#
-# In general, dependencies are extracted directly from LaTeX output on
-# your document. This includes
-#
-# * Bibliography information
-# * \include or \input files (honoring \includeonly, too)
-# * Graphics files inserted by the graphicx package
-#
-# Where possible, all of these are built correctly and automatically.
-# In the case of graphics files, these are generated from the following
-# file types:
-#
-# GraphViz: .dot
-# GNUPlot: .gpi
-# XFig: .fig
-# XMgrace: .xvg
-# SVG: .svg
-# PNG: .png
-# JPEG: .jpg
-# GZipped EPS: .eps.gz
-#
-# If the file exists as a .eps already, it is merely used (and will not
-# be deleted by 'clean'!).
-#
-# LaTeX and BibTeX are invoked correctly and the "Rerun to get
-# cross-references right" warning is heeded a reasonable number of
-# times. In my experience this is enough for even the most troublesome
-# documents, but it can be easily changed (if LaTeX has to be run after
-# BibTeX more than three times, it is likely that something is moving
-# back and forth between pages, and no amount of LaTeXing will fix
-# that).
-#
-# \includeonly is honored by this system, so files that are not
-# specified there will not trigger a rebuild when changed.
-#
-# Beamer:
-# A special TeX source comment is recognized by this makefile (only when
-# BUILD_STRATEGY=latex, since this invokes psnup):
-#
-# %%[[:space:]]*BEAMER[[:space:]]*LARGE
-#
-# The presence of this comment forces the output of dvips through psnup
-# to enlarge beamer slides to take up an entire letter-sized page. This
-# is particularly useful when printing transparencies or paper versions
-# of the slides. For some reason landscape orientation doesn't appear
-# to work, though.
-#
-# If you want to put multiple slides on a page, use this option and then
-# print using mpage, a2ps, or psnup to consolidate slides. My personal
-# favorite is a2ps, but your mileage may vary.
-#
-# When beamer is the document class, dvips does NOT receive a paper size
-# command line attribute, since beamer does special things with sizes.
-#
-# GNUPlot Graphics:
-# When creating a .gpi file, DO NOT INCLUDE the "set terminal" or "set
-# output" commands! The makefile will include terminal information for
-# you. Besides being unnecessary and potentially harmful, including the
-# terminal definition in the .gpi file makes it harder for you, the one
-# writing the document, to preview your graphics, e.g., with
-#
-# gnuplot -persist myfile.gpi
-#
-# so don't do specify a terminal or an output file in your .gpi files.
-#
-# When building a gpi file into an eps file, there are several features
-# available to the document designer:
-#
-# Global Header:
-# The makefile searches for the files in the variable GNUPLOT_GLOBAL
-# in order:
-#
-# ($(GNUPLOT_GLOBAL))
-#
-# Only the first found is used. All .gpi files in the directory are
-# treated as though the contents of GNUPLOT_GLOBAL were directly
-# included at the top of the file.
-#
-# NOTE: This includes special comments! (see below)
-#
-# Font Size:
-# A special comment in a .gpi file (or a globally included file) of
-# the form
-#
-# ## FONTSIZE=<number>
-#
-# will change the font size of the GPI output. If font size is
-# specified in both the global file and the GPI file, the
-# specification in the individual GPI file is used.
-#
-# Grayscale Output:
-# GNUplot files also support a special comment to force them to be
-# output in grayscale *no matter what*:
-#
-# ## GRAY
-#
-# This is not generally advisable, since you can always create a
-# grayscale document using the forms mentioned above. But, if your
-# plot simply must be grayscale even in a document that allows
-# colors, this is how you do it.
-#
-# XFig Graphics:
-# No special handling is done with XFig, except when a global
-# grayscale method is used, e.g.
-#
-# make GRAY=1 document
-#
-# In these cases the .eps files is created using the -N switch to
-# fig2dev to turn off color output. (Only works with eps, not pstex
-# output)
-#
-# GraphVis Graphics:
-# Color settings are simply ignored here. The 'dot' program is used
-# to transform a .dot file into a .eps file.
-#
-# If you want, you can use the dot2tex program to convert dot files
-# to tex graphics. The default is to just call dot2tex with no
-# arguments, but you can change the DOT2TEX definition to include
-# options as needed (in your Makefile.ini).
-#
-# Note that, as with pstex, the makefile cannot use latex's own
-# output to discover all missing dot_t (output) files, since anytime
-# TeX includes TeX, it has to bail when it can't find the include
-# file. It can therefore only stop on the first missing file it
-# discovers, and we can't get a large list of them out easily.
-#
-# So, the makefile errors out if it's missing an included dot_t
-# file, then prompts the user to run this command manually:
-#
-# make all-dot2tex
-#
-# GZipped EPS Graphics:
-#
-# A .eps.gz file is sometimes a nice thing to have. EPS files can get
-# very large, especially when created from bitmaps (don't do this if you
-# don't have to). This makefile will unzip them (not in place) to
-# create the appropriate EPS file.
-#
-#
-endef
-
-#
-# DEPENDENCY CHART:
-#
-# digraph "g" {
-# rankdir=TB
-# size="9,9"
-# edge [fontsize=12 weight=10]
-# node [shape=box fontsize=14 style=rounded]
-#
-# eps [
-# shape=Mrecord
-# label="{{<gpi> GNUplot|<epsgz> GZip|<dot> Dot|<fig> XFig}|<eps> eps}"
-# ]
-# pstex [label="%.pstex"]
-# pstex_t [label="%.pstex_t"]
-# tex_outputs [shape=point]
-# extra_tex_files [shape=point]
-# gpi_data [label="<data>"]
-# gpi_includes [label="_include_.gpi"]
-# aux [label="%.aux"]
-# fls [label="%.fls"]
-# idx [label="%.idx"]
-# glo [label="%.glo"]
-# ind [label="%.ind"]
-# log [label="%.log"]
-# tex_sh [label="%.tex.sh"]
-# rst [label="%.rst"]
-# tex [
-# shape=record
-# label="<tex> %.tex|<include> _include_.tex"
-# ]
-# include_aux [label="_include_.aux"]
-# file_bib [label=".bib"]
-# bbl [label="%.bbl"]
-# dvi [label="%.dvi"]
-# ps [label="%.ps"]
-# pdf [label="%.pdf"]
-# fig [label=".fig"]
-# dot [label=".dot"]
-# gpi [label=".gpi"]
-# eps_gz [label=".eps.gz"]
-#
-# gpi_files [shape=point]
-#
-# rst -> tex:tex [label="reST"]
-# tex_sh -> tex:tex [label="sh"]
-# tex_pl -> tex:tex [label="perl"]
-# tex_py -> tex:tex [label="python"]
-# tex -> tex_outputs [label="latex"]
-# tex_outputs -> dvi
-# tex_outputs -> aux
-# tex_outputs -> log
-# tex_outputs -> fls
-# tex_outputs -> idx
-# tex_outputs -> include_aux
-# aux -> bbl [label="bibtex"]
-# file_bib -> bbl [label="bibtex"]
-# idx -> ind [label="makeindex"]
-# glo -> gls [label="makeindex"]
-# nlo -> nls [label="makeindex"]
-# gls -> extra_tex_files
-# nls -> extra_tex_files
-# ind -> extra_tex_files
-# bbl -> extra_tex_files
-# eps -> extra_tex_files
-# extra_tex_files -> dvi [label="latex"]
-# gpi_files -> eps:gpi [label="gnuplot"]
-# gpi -> gpi_files
-# gpi_data -> gpi_files
-# gpi_includes -> gpi_files
-# eps_gz -> eps:epsgz [label="gunzip"]
-# fig -> eps:fig [label="fig2dev"]
-# fig -> pstex [label="fig2dev"]
-# fig -> pstex_t [label="fig2dev"]
-# pstex -> pstex_t [label="fig2dev"]
-# dot -> eps:dot [label="dot"]
-# dvi -> ps [label="dvips"]
-# include_aux -> bbl [label="bibtex"]
-# ps -> pdf [label="ps2pdf"]
-#
-# edge [ color=blue label="" style=dotted weight=1 fontcolor=blue]
-# fls -> tex:include [label="INPUT: *.tex"]
-# fls -> file_bib [label="INPUT: *.aux"]
-# aux -> file_bib [label="\\bibdata{...}"]
-# include_aux -> file_bib [label="\\bibdata{...}"]
-# log -> gpi [label="Graphic file"]
-# log -> fig [label="Graphic file"]
-# log -> eps_gz [label="Graphic file"]
-# log -> dot [label="Graphic file"]
-# log -> idx [label="No file *.ind"]
-# log -> glo [label="No file *.gls"]
-# log -> nlo [label="No file *.nls"]
-# gpi -> gpi_data [label="plot '...'"]
-# gpi -> gpi_includes [label="load '...'"]
-# tex:tex -> ps [label="paper"]
-# tex:tex -> pdf [label="embedding"]
-# }
-#
-
-#
-# DEPENDENCY CHART SCRIPT
-#
-# $(call output_dependency_graph,[<output file>])
-define output-dependency-graph
- if [ -f '$(this_file)' ]; then \
- $(SED) \
- -e '/^[[:space:]]*#[[:space:]]*DEPENDENCY CHART:/,/^$$/!d' \
- -e '/DEPENDENCY CHART/d' \
- -e '/^$$/d' \
- -e 's/^[[:space:]]*#//' \
- $(this_file) $(if $1,> '$1',); \
- else \
- $(ECHO) "Cannot determine the name of this makefile."; \
- fi
-endef
-#
-.PHONY: Targets.ini $(HOME)/.latex-makefile/Targets.ini
--include Targets.ini
--include $(HOME)/.latex-makefile/Targets.ini
-#
-# vim: noet sts=0 sw=8 ts=8
-
diff --git a/Master/texmf-dist/doc/xetex/xetexref/Makefile.ini b/Master/texmf-dist/doc/xetex/xetexref/Makefile.ini
deleted file mode 100644
index b009231cc73..00000000000
--- a/Master/texmf-dist/doc/xetex/xetexref/Makefile.ini
+++ /dev/null
@@ -1,2 +0,0 @@
-BUILD_STRATEGY := xelatex
-LATEX_OPTS := --no-mktex=tfm
diff --git a/Master/texmf-dist/doc/xetex/xetexref/README b/Master/texmf-dist/doc/xetex/xetexref/README
index 05ee0d6c1d8..948f97d1676 100644
--- a/Master/texmf-dist/doc/xetex/xetexref/README
+++ b/Master/texmf-dist/doc/xetex/xetexref/README
@@ -2,7 +2,13 @@
=== XETEXREF ===
================
-This is the reference documentation for XeTeX detailing its
+This is unofficial reference documentation for XeTeX detailing its
extended features.
-Released at http://mirror.ctan.org/info/xetexref.
+Developed at https://github.com/wspr/xetexref,
+released at http://mirror.ctan.org/info/xetexref.
+
+Will Robertson
+--------------
+Distributable under the LPPL,
+v1.3a or greater (your choice).
diff --git a/Master/texmf-dist/doc/xetex/xetexref/xetex-reference.pdf b/Master/texmf-dist/doc/xetex/xetexref/xetex-reference.pdf
index 52afa846dd2..c2500c1aa26 100644
--- a/Master/texmf-dist/doc/xetex/xetexref/xetex-reference.pdf
+++ b/Master/texmf-dist/doc/xetex/xetexref/xetex-reference.pdf
Binary files differ
diff --git a/Master/texmf-dist/doc/xetex/xetexref/xetex-reference.tex b/Master/texmf-dist/doc/xetex/xetexref/xetex-reference.tex
index feae3759ebf..ed0a8c842c2 100644
--- a/Master/texmf-dist/doc/xetex/xetexref/xetex-reference.tex
+++ b/Master/texmf-dist/doc/xetex/xetexref/xetex-reference.tex
@@ -25,10 +25,24 @@
\def\@dotsep{999}
\usepackage{fontspec,unicode-math}
-\setmainfont[Scale=MatchLowercase]{TeX Gyre Pagella}
-\setsansfont[Scale=MatchLowercase]{TeX Gyre Heros}
-\setmonofont[Scale=MatchLowercase, AutoFakeSlant=.2]{Inconsolata}
-\setmathfont{TeX Gyre Pagella Math}
+\setmainfont{texgyrepagella}[
+ Extension = .otf ,
+ UprightFont = *-regular ,
+ ItalicFont = *-italic ,
+ BoldFont = *-bold ,
+ BoldItalicFont = *-bolditalic ,
+ Scale=MatchLowercase
+ ]
+\setsansfont{texgyreheros}[
+ Extension = .otf ,
+ UprightFont = *-regular ,
+ ItalicFont = *-italic ,
+ BoldFont = *-bold ,
+ BoldItalicFont = *-bolditalic ,
+ Scale=MatchLowercase
+ ]
+\setmonofont{inconsolata}[Scale=MatchLowercase, AutoFakeSlant=.2]
+\setmathfont{texgyrepagella-math.otf}
\usepackage{calc,fancyvrb,hyperref,refstyle,varioref,xcolor,hologo,xspace}
\usepackage{geometry}
@@ -218,10 +232,8 @@ the square brackets. \Eg,
\subsection{Font options}
-\xarg{Font options} are only applicable when the font is selected
-through the operating system (\ie, without square brackets). They may
-be any concatenation of the following:
-
+The following \xarg{font options} are only applicable when the font is selected
+through the operating system (\ie, without square brackets):
\begin{optdesc}
\item[/B] Use the bold version of the selected font.
\item[/I] Use the italic version of the selected font.
@@ -229,6 +241,10 @@ be any concatenation of the following:
\item[/IB] Same as \texttt{/BI}.
\item[/S=$x$] Use the version of the selected font corresponding to the
optical size $x$\,pt.
+\end{optdesc}
+
+The following \xarg{font options} control which `renderer' \xetex uses to interface with the font:
+\begin{optdesc}
\item[/AAT] Explicitly use the AAT renderer (Mac~OS~X only).
\item[/OT] Explicitly use the OpenType renderer (new in 0.9999).
\item[/GR] Explicitly use the Graphite renderer.%
@@ -1027,6 +1043,38 @@ box.
\desc{Expands to the number of pages in a PDF file.}
\endcmd
+
+\section{Character protrusion}
+
+\cmd|\XeTeXprotrudechars|
+\xarg{integer}
+\desc{Equivalent to \cs{pdfprotrudechars} in pdf\TeX{} for controlling
+character protrusion or ‘margin kerning’. When set to zero (default), character
+protrusion is turned off. When set to one, it is activated but will not affect
+line-breaking. When set to two, line-breaking decisions will change as a result
+of the character protrusion.}
+\begin{example}
+\XeTeXprotrudechars=2
+\font\rm="[texgyrepagella-regular.otf]"\relax
+\rm
+\rpcode\font\XeTeXcharglyph\hyphenchar\font=250
+\hsize=20mm
+a a a a a a a a a a abbabbabb aabbabbabb abbabb
+\end{example}
+See the pdf\TeX{} documentation for further details.
+\endcmd
+
+\cmd|\rpcode| \xarg{font} \xarg{char slot} (integer, $n$)
+\desc{Sets the right-side character protrusion value of the \xarg{char slot} in
+the specified \xarg{font} to $n/1000$\,em. $n$ is clipped to $\pm1000$.}
+\endcmd
+
+\cmd|\lpcode| \xarg{font} \xarg{char slot} (integer, $n$)
+\desc{Sets the left-side character protrusion value of the \xarg{char slot} in
+the specified \xarg{font} to $n/1000$\,em. $n$ is clipped to $\pm1000$.}
+\endcmd
+
+
\section{Cross-compatibility with \pdftex and/or \luatex}
\cmd|\pdfpageheight|
@@ -1125,6 +1173,16 @@ suppressed and the font control sequence being defined is set to
\end{example}
\endcmd
+\cmd|\pdfmapfile|
+\xarg{map spec}
+\desc{Defined in \texttt{xe(la)tex.ini} to place a whatsit special for \texttt{xdvipdfmx} to set a font map file. See the \pdftex user manual for full details.}
+\endcmd
+
+\cmd|\pdfmapline|
+\xarg{line from map spec}
+\desc{Defined in \texttt{xe(la)tex.ini} to place a whatsit special for \texttt{xdvipdfmx} to set up a font map. See the \pdftex user manual for full details.}
+\endcmd
+
\section{Misc.}
\cmd|\XeTeXversion|