diff options
Diffstat (limited to 'Master/texmf-dist')
| -rw-r--r-- | Master/texmf-dist/doc/latex/boxhandler/README | 22 | ||||
| -rw-r--r-- | Master/texmf-dist/doc/latex/boxhandler/boxhandler.pdf | bin | 0 -> 212271 bytes | |||
| -rw-r--r-- | Master/texmf-dist/source/latex/boxhandler/boxhandler.dtx | 1721 | ||||
| -rw-r--r-- | Master/texmf-dist/source/latex/boxhandler/boxhandler.ins | 6 | ||||
| -rw-r--r-- | Master/texmf-dist/tex/latex/boxhandler/boxhandler.sty | 464 | ||||
| -rw-r--r-- | Master/texmf-dist/tpm/boxhandler.tpm | 29 |
6 files changed, 2242 insertions, 0 deletions
diff --git a/Master/texmf-dist/doc/latex/boxhandler/README b/Master/texmf-dist/doc/latex/boxhandler/README new file mode 100644 index 00000000000..11754e87a14 --- /dev/null +++ b/Master/texmf-dist/doc/latex/boxhandler/README @@ -0,0 +1,22 @@ + + The boxhandler package + ====================== + +This package provides a powerful, yet simple, interface for managing and +manipulating the captions of boxed objects (e.g., tables and figures). In +addition to providing wide flexibility in the presentation style of the +captions, this package, when used in combination with conditionally compiled +LaTeX source codes, provides the ability to defer or preempt the presentation +of figures, tables, and their associated lists. In this way, one can, for +example, by changing a single line of source code in the .tex file, change the +output of LaTeX from a technical report with tables and figures interspersed +in the text, to a journal-manuscript submission, with figures collected at the +end of document, as well as lof and lot deferred or preempted. + +Run `boxhandler.ins' through LaTeX to produce boxhandler.sty + from boxhandler.dtx. +Run `boxhandler.dtx' through LaTeX to produce the documentation. + +This program can be redistributed and/or modified, with attribution. + + Steven Segletes <steven@arl.army.mil> diff --git a/Master/texmf-dist/doc/latex/boxhandler/boxhandler.pdf b/Master/texmf-dist/doc/latex/boxhandler/boxhandler.pdf Binary files differnew file mode 100644 index 00000000000..7bb4da517e3 --- /dev/null +++ b/Master/texmf-dist/doc/latex/boxhandler/boxhandler.pdf diff --git a/Master/texmf-dist/source/latex/boxhandler/boxhandler.dtx b/Master/texmf-dist/source/latex/boxhandler/boxhandler.dtx new file mode 100644 index 00000000000..0bdf9b34289 --- /dev/null +++ b/Master/texmf-dist/source/latex/boxhandler/boxhandler.dtx @@ -0,0 +1,1721 @@ +% \iffalse +%% +%% boxhandler.sty +%% Copyright Steven B. Segletes. +%% +%% This file may be redistributed and/or modified with attribution. +%% +%% This is boxhandler.sty, derived from earlier incarnations of savcap.sty & +%% arlcaptions.sty. +%% +%<package>\ProvidesPackage{boxhandler} +%<package>[2006/04/24 v1.03 +%<package> Flexible Captioning Styles and Deferred Box/List Printing] +%<package>\NeedsTeXFormat{LaTeX2e} +%<*driver> +% V1.02 Corrected minor grammar issue in documentation. +% V1.03 Changed some tabs into spaces that were screwing up appearance +\documentclass{ltxdoc} +\usepackage{boxhandler} +\DisableCrossrefs +\CodelineNumbered +% DEFINE SOME COMMANDS THAT ARE EASIER HERE THAN IN DocInput ENVIRONMENT +\def\tbllayout{|c|}% CAN'T GET PLAIN "|" CHARACTER IN DocInput MODE +\def\lb{\char'173}% LEFT BRACE "{" WHEN INVOKED IN \tt FONT +\def\rb{\char'175}% RIGHT BRACE "}" WHEN INVOKED IN \tt FONT +\def\bs{\char'134}% BACKSLASH "\" WHEN INVOKED IN \tt FONT +\let\iq\itshape% SHORTHAND FOR ITALIC FONT +\let\uq\upshape% SHORTHAND FOR UPSHAPE FONT +\GetFileInfo{boxhandler.sty} +\begin{document} + \title{The \textsf{boxhandler} Package\\ + \rule{0em}{0.7em}\small\fileinfo} + \author{Steven B. Segletes\\ + steven@arl.army.mil} + \date{\filedate\\ + \fileversion} + \maketitle + \DocInput{boxhandler.dtx} +\end{document} +%</driver> +% \fi +% \parskip 1ex +% \begin{abstract} +% This package was developed as a tool to manage the handling of \LaTeX{} +% tables and figures, especially for conditionally compiled documents. +% With these tools, not only can one conveniently define table and figure +% captions with a wide variety of stylistic appearances, but one can +% create a single \LaTeX{} document that can, with a single line change +% in the source code, produce an output that has vastly different layout +% from the baseline configuration, not only in terms of caption style, +% but also in terms of the locations where figures, tables and lists +% appear (or not) in the document. +% \end{abstract} +% +% \tableofcontents\rule[.2em]{4.5in}{.3mm}\vspace{-1.5em} +% +% \section {Introduction} +% +% The commands described in the |boxhandler| style accomplish a number of +% useful functions. Even without the use of a conditionally-compiled +% document: +% \begin{enumerate} +% \item they allow the definition of figures and tables in compact routine +% calls; +% \item they retain wide flexibility in caption appearance \& table/figure +% placement, through the use of simple setup calls. +% \end{enumerate} +% And for those who wish, from a single \LaTeX{} source file to +% conditionally produce, on one hand, an internal technical report for +% example, and on the other hand, a journal manuscript submission, this +% style additionally allows: +% \begin{enumerate}\setcounter{enumi}{2} +% \item printing of figures \& tables to be [conditionally] deferred to later +% in the document; +% \item printing of lists (\textit{lof}, \textit{lot}) to be deferred later +% in document; and +% \item the preemptive cancellation of the \textit{toc}, \textit{lof}, and +% \textit{lot}. +% \end{enumerate} +% +% \section{Caption Style, Appearance and Box Placement} +% +% \subsection{Commands} +% +% This routine provides several routines for creating and tailoring the +% appearance of captioned ``boxes'' (that is, figures and tables). +% They include: +% \begin{verse} +% |\bxtable[|\iq loc\uq|]{|\iq caption\uq|}{|\iq boxed object\uq|}|\\ +% |\bxfigure[|\iq loc\uq|]{|\iq caption\uq|}{|\iq boxed object\uq|}|\\ +% |\relaxCaptionWidth[|\iq len\uq|]|\\ +% |\limitCaptionWidth[|\iq len\uq|]|\\ +% |\constrainCaptionWidth[|\iq len\uq|]{|\iq len\uq|}|\\ +% |\captionStyle{|\iq offset type\uq|}{|\iq alignment type\uq|}|\\ +% \end{verse} +% \DescribeMacro{\bxtable} +% \DescribeMacro{\bxfigure} +% The routines |\bxtable| and |\bxfigure| will actually produce the +% complete table or figure, including caption. In these two routines, +% \iq loc \uq is an optional argument. It can take on a value of: |h|, +% |t|, |b|, or |p|. This parameter refers to the same location argument +% that goes with the \LaTeX{} float environments, to help \LaTeX{} +% determine the placement of the item on your page. |h| is `here', |t| is +% `top', |b| is `bottom', |p| is `page of floats'. Omitting the first +% argument just uses the default placement of the table and figure +% environments. +% +% In |\bxtable| and |\bxfigure|, \iq caption \uq is the argument that +% will eventually get passed on to the |\caption| call, after the routine +% properly formulates it to match the desired figure/caption style. The +% caption may include |\label| identifiers to be referenced by the main +% text. +% +% For |\bxtable|, the \iq boxed object \uq will typically be a tabular +% box, though any \LaTeX{} boxed object will satisfy the routine. Thus, +% the difference between a |\bxtable| and a |\bxfigure| is largely a +% semantic one. The true difference between |\bxtable| and |\bxfigure| +% in this regard is that the table caption is placed above the table, +% whereas the figure caption is placed below it. In addition, because +% these routines make use of the standard |\caption| call within the +% table and figure environments, calls to |\bxtable| and |\bxfigure| will +% have their references automatically available to the List of Tables and +% List of Figures, respectively. +% +% One of the differences between the |boxhandler| style and \LaTeX{}'s +% default captioning environments is the default caption width. Whereas +% \LaTeX{} defaults to a full margin-to-margin caption width, +% |boxhandler| defaults to a caption width equal to and aligned with the +% width of the box being captioned. However, this caption-width default +% within |boxhandler| can be changed to any arbitrary value, including +% full-width, if desired. The caption width, through the use of the +% ``dead margin,'' can also be conveniently set to a fixed offset from +% the table or figure width. For example, all table captions could be +% set to a width 1 inch larger than their associated tables. +% +% \DescribeMacro{\relaxCaptionWidth} +% The routine |\relaxCaptionWidth| takes as its optional argument a +% length dimension corresponding to the minimum allowed caption width, +% even if an associated table or figure is of lesser box width. While +% this command might technically violate an organization's style +% guideline, it allows one to avoid the situation of trying to assign a +% caption to fit the width dimension of an extremely narrow table or +% figure. An example of this use is shown in Tables~\ref{tbl:narrow} and +% \ref{tbl:wide}. In the first table, the default minimum caption width +% of 1~inch is retained, resulting in an unwieldy caption. The second +% table has been printed following an invocation of +% |\relaxCaptionWidth[4.0in]|. Using |\relaxcaption| with no argument +% resets the minimum allowed caption width to the default value of 1 +% inch. +% +% \def\mycaption{A table which provides the secret entryword of the +% Halloween Ghost Club, assuming you can read the caption} +% \def\mytabular{ +% \begin{tabular}{\tbllayout} +% \hline +% Boohoocachoo\\ +% \hline +% \end{tabular} +% } +% \relaxCaptionWidth +% \bxtable[t]{\mycaption\label{tbl:narrow}}{\mytabular} +% \relaxCaptionWidth[4.0in] +% \bxtable[t]{\mycaption\label{tbl:wide}}{\mytabular} +% \relaxCaptionWidth +% +% If the minimum caption width is relaxed, the maximum allowed width +% will be bumped up, if necessary, to remain greater than or equal to +% the minimum allowed caption width. +% +% \DescribeMacro{\limitCaptionWidth} +% The routine |\limitCaptionWidth| is analogous to |\relaxCaptionWidth|. +% In this case, however, the maximum allowable caption width will be +% defined. If no argument is specified, the maximum allowed caption +% width is reset to the default value, which is |\textwidth|. +% +% If the maximum caption width is constrained, the minimum allowed width +% will be reduced, if necessary, to remain less than or equal to the +% maximum allowed caption width. +% +% \DescribeMacro{\constrainCaptionWidth} +% The minimum and maximum allowed caption widths may be simultaneously +% specified with |\constrainCaptionWidth|. The order of the two length +% arguments is not important. Omitting the optional argument will cause +% both the min and max allowable caption widths to be fixed at the +% specified value. In this manner, all caption widths will be set to this +% single value, regardless of the size of the table or figure box it +% describes. Note that the use of |\constrainCaptionWidth| with a single +% argument of |{\textwidth}| allows a full-width left-to-right margin +% caption style to be achieved, if desired, as in Figure~\ref{fig:cnst}. +% +% \DescribeMacro{\captionStyle} +% To understand the the figure and table caption style +% command, examine the caption styles in +% Figures~\ref{fig:styo}--\ref{fig:styc}, in reference to the +% boxed object with which they are paired. +% |\captionStyle{|\iq offset type\uq|}{|\iq alignment type\uq|}| is a +% compact way of specifying the caption style. The first parameter +% specifies the \textit{offset type} for long captions (since ``offset'' +% has no meaning for short captions). It can take +% the value of |o| for ``offset'' captions, such as that found in +% Figure~\ref{fig:styo}, or |n| for ``nooffset'' captions, such as +% that found in Figure~\ref{fig:styn}. +% +% \relaxCaptionWidth[\textwidth] +% \captionStyle{n}{l} +% \bxfigure[p] +% {Here is a full-width caption that takes up the full +% margin-to-margin dimension, regardless of how wide the boxed object +% it serves is. In this case, the caption is of the ``nooffset'' +% variety\label{fig:cnst}} +% {\framebox(260,40){Boxed Object: \tt\bs +% constrainCaptionWidth\lb\bs textwidth\rb}} +% \relaxCaptionWidth +% \captionStyle{o}{} +% \bxfigure[p]{For ``offset'' captions, the ID label for the caption +% is offset to the left of the caption text\label{fig:styo}} +% {\framebox(180,40){Boxed Object: \tt\bs captionStyle\{o\}\{\}}} +% \captionStyle{n}{} +% \bxfigure[p]{For ``nooffset'' captions, the caption's ID label +% is integrated into the caption text itself\label{fig:styn}} +% {\framebox(180,40){Boxed Object: \tt\bs captionStyle\{n\}\{\}}} +% \captionStyle{}{l} +% \bxfigure[p]{A short ``left''-aligned caption\label{fig:styl}} +% {\framebox(250,40){Boxed Object: \tt\bs captionStyle\{\}\{l\}}} +% \captionStyle{}{c} +% \bxfigure[p]{A short ``center''-aligned caption\label{fig:styc}} +% {\framebox(250,40){Boxed Object: \tt\bs captionStyle\{\}\{c\}}} +% +% The second parameter specifies the \textit{alignment type} for short +% captions (since long captions are already fully aligned). It can take +% on the value of |l| for ``left''-aligned +% captions, such as that in Figure~\ref{fig:styl}, the value |c| for +% ``center''-aligned captions, such as that in Figure~\ref{fig:styc}, +% or the value of |r| for ``right''-aligned captions. +% +% The default style for this package is |\captionstyle{o}{l}|, or +% ``offset''-style, ``left''-aligned captions. This default caption +% style is that displayed in Figures~\ref{fig:styo} and \ref{fig:styl}, +% for long and short captions, respectively. +% +% Note that caption alignment is not the same as caption justification. +% Regardless of alignment, any caption of size sufficient to span the +% full width of the caption box will be, by default, fully justified or +% ``flushed'' within that caption box. The captions in Figures~1 and 2 +% demonstrate this for both offset and nooffset caption types. Text +% justification can, however, be altered, as described later by the +% |\CaptionJustification| parameter. +% +% \subsection {Additional User Parameters} +% +% In addition to the above commands, there are a variety of +% lengths, counters, and modes, which may be set by the user, +% to adjust the appearance of the caption +% presentation. The settings for all these parameters hold until and +% unless subsequently reset by the user. +% +% \begin{verse} +% |\setlength\captionGap{|\iq len\uq|}|\\ +% |\setlength\TableDeadMargin{|\iq len\uq|}|\\ +% |\setlength\FigureDeadMargin{|\iq len\uq|}|\\ +% |\setcounter{abovecaptionskipterm}{|\iq integer\uq|}|\\ +% |\setcounter{belowcaptionskipterm}{|\iq integer\uq|}|\\ +% |\let\CaptionFontSize |\iq fontsize, e.g., \uq|\small|\\ +% |\let\TableFontSize |\iq fontsize, e.g., \uq|\small|\\ +% |\def\LRTablePlacement{flushleft|\iq , \uq|center|\iq , or \uq +% |flushright}|\\ +% |\def\LRFigurePlacement{flushleft|\iq , \uq|center|\iq , or \uq +% |flushright}|\\ +% |\def\CaptionJustification{|\iq blank, \uq|\raggedright|\iq ,\\\uq +% | \centering|\iq , or \uq +% |\raggedleft}|\\ +% \end{verse} +% +% \DescribeMacro{\captionGap} +% |\captionGap| defines the horizontal space +% between the caption identifier (e.g., ``Figure~1.'') and the start +% of the caption text itself. Its default value is 1ex. +% +% \DescribeMacro{\TableDeadMargin} +% \DescribeMacro{\FigureDeadMargin} +% |\TableDeadMargin| and |\FigureDeadMargin| may be set to correct the +% caption alignment for boxes that have a deadzone around their border. +% Such dead space takes up boxwidth, but shows no visible data. These +% parameter values should be set to the left or right-hand dead space +% (assumed symmetric). The default value for |\TableDeadMargin|, which +% is suitable for \LaTeX{} generated tabular data, is 0.375em. The default +% for |\FigureDeadMargin| is 0em. +% +% Additionally, these |\...DeadMargin| commands can be used to set the +% box-size-to-caption-size disparity to any desired non-flush value. As +% an example, setting the value of |\FigureDeadMargin| to 0.5 inch will +% make the figure captions always 1~inch smaller than the actual figure +% size. Setting it to $-0.5$ inch (\textit{a negative value!}) will make +% the caption always 1 inch larger than the actual figure size (within +% the error of the actual figure dead margin width, and subject to the +% caption width min/max constraints). +% +% \DescribeMacro{\abovecaptionskipterm} +% \DescribeMacro{\belowcaptionskipterm} +% The quantities |\abovecaptionskipterm| and |\belowcaptionskipterm| +% are related to +% \LaTeX{}'s |\abovecaptionskip| and |\belowcaptionskip| functions, +% defining the white- space above and below a caption. Unlike the +% corresponding \LaTeX{} functions, the parameters here are integers (not +% lengths). The terms represent multipliers of the \LaTeX{} length +% measure |\p@| to be used for the above- and below- captionskip. +% Their default values are 10 and 7, respectively. These +% values affect only captions that are created as part of bxtable and +% bxfigure, and do not affect the |\abovecaptionskip| and +% |\belowcaptionskip| definitions intrinsic to your default document +% class. +% \begin{picture} (0,0) +% \put(-63,191){\makebox(20,0)[l] +% {\small\tt\bs abovecaption-}} +% \put(-63,182){\makebox(20,0)[l] +% {\small~~|skipterm| = 3~~$\rightarrow$}} +% \put(-90,164){\makebox(20,0)[l] +% {\small\tt\bs FigureDeadMargin\rm = 1em~$\uparrow$}} +% \put(-90,155){\makebox(20,0)[l] +% {\small (1em on left; 1em on right)}} +% \end{picture} +% +% \DescribeMacro{\CaptionFontSize} +% |\CaptionFontSize| defines the default size of the caption font, for +% example \normalsize, |\large|, |\scriptsize|, etc. The default value +% is |\small|. +% +% \DescribeMacro{\TableFontSize} +% |\TableFontSize| defines the default size of the font that appears +% within the tables themselves. Its default value is |\small|. +% +% \DescribeMacro{\LRTablePlacement} +% \DescribeMacro{\LRFigurePlacement} +% |\LRTablePlacement| and |\LRFigurePlacement| define the horizontal +% placement of tables and figures with respect to the paper margins. The +% options for these two parameters include |{flushleft}|, |{center}| and +% |{flushright}|. The default is |{center}|. This is different from the +% ``left'', ``center'', and ``right'' alignment modes for captions, +% which align short captions with respect to the boxed data. +% +% \DescribeMacro{\CaptionJustification} +% By default, any caption that spans the entire width of the caption box +% will be fully justified, or ``flushed'' with respect to the caption box +% margins. However, this behavior can be reset by redefining the +% parameter |\CaptionJustification|. For a ragged-right style within the +% caption box, the definition should be set to |\raggedright|. For the +% brave and daring, |\raggedleft| and/or |\centering| can be explored. +% Use |\def\CaptionJustification{}| to reset subsequent captions for full +% flushing. +% +% Figure~\ref{fig:ragged} is provided to demonstrate some of these +% features including: caption justification (|\raggedright|), caption gap +% (2.5~ex), caption font size (|\scriptsize|), LR figure placement +% (|flushright|), |abovecaptionskipterm| (3), and a value for +% |\FigureDeadMargin| of 1em. +% +% \captionStyle{o}{l}\setlength\captionGap{2.5ex} +% \def\CaptionJustification{\raggedright}\let\CaptionFontSize\scriptsize +% \setcounter{abovecaptionskipterm}{3} +% \def\LRFigurePlacement{flushright}\setlength\FigureDeadMargin{1em} +% \bxfigure[t]{Here is one example of a caption that has been set for +% a ragged right justification. Justification, or ``flushing,'' +% is different than caption alignment, which is specified +% independently and deals with how short captions are +% aligned with respect to the boxed object\label{fig:ragged}} +% {\framebox(263,60) +% {\parbox{3.5in}{Boxed Object:\\ +% \small \hspace*{2.05in} +% |flushright| \textit{placement $\rightarrow$\\ +% \hspace*{.17in} \uq 2.5ex \hspace*{0.45in} +% \tt\bs\rm|scriptsize| \iq \\ +% caption gap \hfill caption font size \hfill +% \uq\tt\bs\rm{|raggedright|} \iq justification}\\ +% \hspace*{.50in} $\downarrow$ \hfill $\downarrow$ +% \hfill \hfill $\downarrow$~~~} +% } +% } +% \def\CaptionJustification{}\setlength\captionGap{2.5ex} +% \let\CaptionFontSize\small \setcounter{abovecaptionskipterm}{10} +% \def\LRFigurePlacement{center}\setlength\FigureDeadMargin{0em} +% +% \section{Box and List Deferral/Preemption} +% +% \subsection{Description of Problem} +% +% For those using conditional compilation to create various versions of +% the same basic document, the |boxhandler| package can provide great +% utility. The package has been designed to permit the deferral and +% preemption of certain aspects of the document, such as figures, tables +% and lists. With such a capability, one has the capacity to not only +% change the appearance of the alternate document version, but to +% fundamentally change its layout too. Table~\ref{tbl:cccode} provides a +% simple example of how a document may be set up for conditional +% compilation. +% +% \setlength\TableDeadMargin{0.2em}\bxtable[h] +% {Conditionally compiled \LaTeX{} code\label{tbl:cccode}} +% {\begin{tabular}{c}\hline\\ +% \ttfamily\parbox{4.15in}{ +% \bs def\bs PREPARETYPE\lb\bs TECHRPT\rb\% choices: \bs TECHRPT or +% \bs MANUSCRIPT\\ +% \bs newcommand\bs TECHRPT\lb\% class for ARL organizational tech rpts\\ +% \% CONDITIONALLY COMPILED CODE FOR TECHRPT DOCUMENTS\\ +% | |\bs documentclass\lb arlticle\rb\\ +% \rb\\ +% \bs newcommand\bs MANUSCRIPT\lb\% article-ized version of tech rpt.\\ +% \% CONDITIONALLY COMPILED CODE FOR MANUSCRIPTS\\ +% | |\bs documentclass[11pt]\lb article\rb\\ +% | |\bs usepackage\lb TR2article\rb\\ +% \% VARIOUS \bs MANUSCRIPT-SPECIFIC SETUP COMMANDS GO HERE\\ +% \rb\\ +% \bs PREPARETYPE\\ +% \% LaTeX CODE \& DOCUMENT COMMON TO BOTH STYLES FOLLOWS HEREAFTER\\ +% }\\ +% \hline\end{tabular} +% } +% +% In this example, by setting the parameter in the first line of the +% document to either |\TECHRPT| or |\MANUSCRIPT|, a different collection +% of setup routines may be invoked for each particular document style. +% This works great for such parameters that affect appearance, but not +% placement of the \LaTeX{} entities. For example, changing fonts, +% margins, indents, etc. works fine with the conditional code shown in +% Table~\ref{tbl:cccode}. Even when a particular document class has +% unique commands not found in other classes, a converter style file may +% be created (such as |TR2article| in the Table~\ref{tbl:cccode} example) +% to deal rationally with invocations of class-specific features. +% +% Where great difficulty arises is when the different styles desired of a +% conditional compilation utilize fundamentally different layouts of the +% principal document elements, such as figures, tables, and lists. For +% example, a technical report would have it's tables and figures +% interspersed throughout the document, whereas the corresponding journal +% manuscript submission might have tables and figures collected, one per +% page, at the end of the document. Whereas the report would have the +% List of Figures (\textit{lof}) as part of the report's front matter, +% the journal manuscript might request to have the \textit{lof} preceding +% the figures located at the end of the manuscript. A typical scientific journal +% manuscript submission would not include a Table of Contents +% (\textit{toc}), and perhaps not a List of Tables (\textit{lot}) either. +% +% Arranging for such options to unfold from a single input source file is +% cumbersome without a special treatment. The |boxhandler| style +% provides routines to expedite and ease this cumbersome process. +% +% \subsection{Deferral and Preemption Commands} +% +% For figure and table deferral, and/or list deferral/preemption, the +% following commands are available, all without arguments: +% +% \begin{verse} +% |\holdTables|\\ +% |\holdFigures|\\ +% |\clearTables|\\ +% |\clearFigures|\\ +% |\killlistoftables|\\ +% |\killlistoffigures|\\ +% |\killtableofcontents|\\ +% |\holdlistoftables|\\ +% |\holdlistoffigures|\\ +% |\clearlistoftables|\\ +% |\clearlistoffigures|\\ +% \end{verse} +% +% \DescribeMacro{\holdTables} +% \DescribeMacro{\holdFigures} +% |\holdTables| and |\holdFigures| are used to direct that any subsequent +% invocations of |\bxtable| and |\bxfigure| merely store, rather than +% store \& print the table or figure. These |\hold...| commands would +% typically be found in the conditionally compiled code for manuscripts, +% for example. +% +% While the calculated width of the caption is saved at the time of call +% to |\bxtable| and |\bxfigure| based upon the |boxtable| parameters at +% the time of the |\bx...| call, the caption format (i.e., [no]offset, +% center/left alignment, caption justification) is not set until the +% figure/table is later printed as part of a |\clear...| command (the +% logic here is that the caption style will be consistent through the +% course of the document, thus alleviating the need to store this data +% for each figure and table). +% +% \DescribeMacro{\clearTables} +% \DescribeMacro{\clearFigures} +% |\clearTables| and |\clearFigures| directs that any tables or figures +% that have been stored, but not yet printed, be output at this point. +% As mentioned above, the offset, alignment, and justification for +% captions is set at the time of printing, not at the time of table or +% figure creation. The format for presenting tables and figures to be +% cleared (i.e., one table/figure per page, vertically centered) can be +% changed by renewing the commands |\theClearedTable| and/or +% |\theClearedFigure|. See the next section on Advanced Use for details. +% +% Note that if tables and figures have not been subject to a |\hold...| +% command, the |\clear...| commands have no effect, since they affect +% only those tables and/or figures which have not already been printed. +% Thus, these commands would typically appear in the common document text +% at the appropriate point where tables and figures, if previously held, +% should be printed. Note that, though commands have not been explicitly +% provided to kill the printing of figures and tables, this can be +% effectively accomplished by putting figures and/or tables on hold, and +% then ending the document without having issued a corresponding +% |\clear...| command. +% +% \DescribeMacro{\killlistoftables} +% \DescribeMacro{\killlistoffigures} +% \DescribeMacro{\killtableofcontents} +% |\killlistoftables|, |\killlistoffigures| and |\killtableofcontents| +% direct that any subsequent calls to print the respective list be +% ignored and that the list be discarded. This action cannot later be +% undone with a |\hold...| command. These commands would typically +% appear in the conditionally compiled region of the document. +% +% \DescribeMacro{\holdlistoftables} +% \DescribeMacro{\holdlistoffigures} +% |\holdlistoftables| and |\holdlistoffigures| direct that calls to print +% the particular list cited be deferred until a later invocation of the +% corresponding |\clear...| command. Note that a call to |\clearTables| +% and |\clearFigures| will also clear the corresponding list first, if it +% has been subject to a |\hold...| command (but not a |\kill...| +% command). These |\hold...| commands would typically appear in the +% conditionally compiled region of the document. +% +% \DescribeMacro{\clearlistoftables} +% \DescribeMacro{\clearlistoffigures} +% |\clearlistoftables| and |\clearlistoffigures| clear the cited list +% (i.e., those lists currently ``on hold''). No list will be +% printed if: the |\listoftables| or |\listoffigures| command hadn't +% earlier been invoked; if it had already been printed out because it +% hadn't been subject to a hold; or if the list had previously been +% killed. Note: calls to |\clearTables| or |\clearFigures| automatically +% causes a call to |\clearlistoftables| or |\clearlistoffigures|, +% respectively. Therefore, these particular calls are only needed +% explicitly in your \LaTeX{} document if it is desired to clear the list +% well in advance of the associated tables or figures. +% +% With the deferral and preemption commands now described, we show how +% they might be used to complete the multi-mode \LaTeX{} document stencil +% that was first laid out in Table~\ref{tbl:cccode}. To see this, refer +% to Table~\ref{tbl:bxcode}. The document is created with |\bxtable| and +% |\bxfigure| calls dispersed throughout text, and nominally asks for the +% \textit{toc}, \textit{lof}, and \textit{lot} to be printed at the +% beginning of the document. When |\PREPARETYPE| is defined as +% |{\TECHRPT}|, this is exactly how the document unfolds. +% +% \setlength\TableDeadMargin{0.2em}\bxtable[t!] +% {Conditionally compiled \LaTeX{} code with \texttt{boxhandler} package +% deferral and preemption directives\label{tbl:bxcode}} +% {\begin{tabular}{c}\hline\\ +% \ttfamily\parbox{4.15in}{ +% \bs def\bs PREPARETYPE\lb\bs TECHRPT\rb\% choices: \bs TECHRPT or +% \bs MANUSCRIPT\\ +% \bs newcommand\bs TECHRPT\lb\% class for ARL organizational tech rpts\\ +% \% CONDITIONALLY COMPILED CODE FOR TECHRPT DOCUMENTS\\ +% | |\bs documentclass\lb arlticle\rb\\ +% | |\bs usepackage\lb boxhandler\rb\\ +% \rb\\ +% \bs newcommand\bs MANUSCRIPT\lb\% article-ized version of tech rpt.\\ +% \% CONDITIONALLY COMPILED CODE FOR MANUSCRIPTS\\ +% | |\bs documentclass[11pt]\lb article\rb\\ +% | |\bs usepackage\lb TR2article\rb\\ +% | |\bs usepackage\lb boxhandler\rb\\ +% | |\bs killtableofcontents\\ +% | |\bs killlistoftables\\ +% | |\bs holdlistoffigures\\ +% | |\bs holdTables\\ +% | |\bs holdFigures\\ +% \% VARIOUS \bs MANUSCRIPT-SPECIFIC SETUP COMMANDS GO HERE\\ +% \rb\\ +% \bs PREPARETYPE\\ +% \% LaTeX CODE \& DOCUMENT COMMON TO BOTH STYLES FOLLOWS HEREAFTER\\ +% \bs begin\lb document\rb\\ +% \bs maketitle\\ +% \bs tableofcontents\\ +% \bs listoffigures\\ +% \bs listoftables\\ +% ...\\ +% \% DOCUMENT CONTAINING \bs bxtable AND \bs bxfigure CALLS GOES HERE.\\ +% ...\\ +% \bs clearTables\\ +% \bs clearFigures\\ +% \bs end\lb document\rb\\ +% }\\ +% \hline\end{tabular} +% } +% +% However, by merely defining |\PREPARETYPE| as |{\MANUSCRIPT}|, the +% \textit{toc} and \textit{lot} will be killed, preempting subsequent +% invocations. Printing of the \textit{lof} will be deferred. As +% |bxtables| and |bxfigures| are invoked, they will be created and +% stored, but not printed. At the very end of the document, all the +% tables will first be cleared, one per page, vertically centered. The +% call to |\clearFigures| will then clear the \textit{lof} on a new page, +% and finally clear all the figures in a similar manner. +% +% \textbf{With the change of a single line of code, a vastly different +% document layout has been achieved!} +% +% \section {Advanced Use (DANGER!)} +% +% Additionally, there are certain lower level, yet accessible, counters, +% macros and lengths, which are intended for advanced use only. It is +% possible to get into difficulty if not thinking through their use +% thoroughly. Pitfalls will be laid out, where known. These accessible +% hooks into the inner workings of the |boxhandler| package include: +% +% \begin{verse} +% \underline{Lengths:}\\ +% |\DeadMargin, \CaptionBoxWidth|\\ +% \underline{Counters:}\\ +% |TableIndex, FigureIndex, TableClearedIndex,|\\ +% |FigureClearedIndex, promptTablesFlag, promptFiguresFlag|\\ +% \underline{Macros:}\\ +% |\StoreTable{|\iq caption\uq|}{|\iq boxed object\uq|}|\\ +% |\StoreFigure{|\iq caption\uq|}{|\iq boxed object\uq|}|\\ +% |\SaveCBox{|\iq new cmd\uq|}{|\iq boxed object\uq|}|\\ +% |\ReciteTable[|\iq loc\uq|]{|\iq caption\uq|}{|\iq cmd\uq +% |}{|\iq wdth\uq|}|\\ +% |\ReciteFigure[|\iq loc\uq|]{|\iq caption\uq|}{|\iq cmd\uq +% |}{|\iq wdth\uq|}|\\ +% |\theClearedTable[|\iq loc\uq|]{|\iq caption\uq|}{|\iq cmd\uq +% |}{|\iq wdth\uq|}|\\ +% |\theClearedFigure[|\iq loc\uq|]{|\iq caption\uq|}{|\iq cmd\uq +% |}{|\iq wdth\uq|}|\\ +% \end{verse} +% +% \DescribeMacro{TableIndex} +% \DescribeMacro{FigureIndex} +% \DescribeMacro{TableClearedIndex} +% \DescribeMacro{FigureClearedIndex} +% To keep track of tables and figures as they are created, the counters +% |TableIndex| and |FigureIndex| are used. To keep track of how many +% tables and figures have already been printed, |TableClearedIndex|, and +% |FigureClearedIndex| are used. The appropriate index is incremented +% whenever a table or figure is created or cleared. These index counters +% are also used as part of the naming convention employed by the +% |\StoreTable| and |\StoreFigure| commands, to be subsequently +% described. +% +% \DescribeMacro{promptTablesFlag} +% \DescribeMacro{promptFiguresFlag} +% The counters |promptTablesFlag| and |promptFiguresFlag| are used as +% binary switches to determine whether calls to |\bxtable| and +% |\bxfigure| result in the prompt display (1) or deferred display (0) of +% the table or figure. The |\holdTables| and |\holdFigures| commands +% change these switches to their `0' state. Any significant use of these +% switches to achieve the printing of latter tables/figures prior to the +% clearing of earlier ones will require the rewrite, by the user, of the +% |\clearTables| and |\clearFigures| commands, since these |\clear...| +% macros were written using a first-in-first-out (FIFO) methodology. +% +% \DescribeMacro{\StoreTable} +% \DescribeMacro{\StoreFigure} +% The macros |\StoreTable| and |\StoreFigure| use the same form of +% caption and data arguments as |\bxtable| and |\bxfigure|. In fact, the +% |\bx...| commands call upon the |\Store...| macros. The difference +% is that the |\StoreTable| and |\StoreFigure| macros will save the +% boxed object without printing it, regardless of whether a |\hold...| +% command has been issued. The saved information will consist of three +% pointers necessary to recreate the table or figure. These pointers +% will be named according to |boxhandler|'s internal naming convention. +% +% At this point, it is worth noting the naming convention of the pointers +% used by |boxhandler| to store the variables for figures and tables. +% The saved information resulting from a |\StoreTable| or |\StoreFigure| +% command will consist of a pointer to a saved box, a pointer to the +% caption text, and a pointer to the calculated width of the caption box +% (based on the state of the |boxhandler| parameters at the time of the +% function call). +% +% The counters |TableIndex| and |FigureIndex| are used to create a unique +% part of these pointer names, in the form of |\roman{|\iq +% indexname\uq|}|. Saved box pointers have the prefix |tbl-| or |fig-|, +% saved caption pointers have the prefix |tblcap-| or |figcap-| and +% caption-width pointers have the prefix |tblcapwdth-| and |figcapwdth-|. +% Thus, for example, the fourth invocation of |\bxtable| or |\StoreTable| +% will create an sbox named |\tbliv| that is used to store the boxed +% (e.g., tabular) data, a pointer |\tblcapiv| that is used to store the +% caption text, and a length pointer |\tblcapwdthiv| that stores the +% value of the calculated caption width. When avoiding creative +% programming, the pointer index (e.g., `iv' in this example) will +% correspond to the actual Table or Figure number (i.e., `4') appearing +% in the caption ID label. However, it is wise to remember, +% \begin{enumerate} +% \item when creating tables or figures outside of the |boxhandler| style; +% \item when bypassing the |\Store...| commands and going straight to the +% lower level |\SaveCBox| command; or +% \item when using the |\Recite...| commands to print multiple occurances +% of a box; +% \end{enumerate} +% that the internal numbering of |boxhandler| tables and figures will +% likely be out of syncronization with the Table and Figure counters. +% +% \DescribeMacro{\SaveCBox} +% The low-level routine which saves a ``captioned box'' is called +% |\SaveCBox|. As its arguments, it follows the form of the \LaTeX{} +% |\sbox| command: it takes a new command name and the boxed object as +% its parameters. This is the routine called by the |\Store...| commands +% with a command argument something like |\tbliv| or |\figiii|, for +% example. You are, however, free to pass your own command names to this +% routine, so as not to conflict with the names autogenerated by the +% |\Store...| commands. Keep in mind that calls to |\SaveCBox| will not, +% by themselves, increment |TableIndex| or |FigureIndex|, and will not be +% tracked by the |\clear...| commands. +% +% \DescribeMacro{\DeadMargin} +% \DescribeMacro{\CaptionBoxWidth} +% In addition to saving the boxed object in the specified command bin, +% the width of the associated caption is calculated, based upon the +% prevailing |boxhandler| parameters at the time of call. One such +% parameter that is used to calculate the caption width, is the dead +% margin. |\SaveCBox|, being a low-level routine, is used for both +% tables and figures. As such, the appropriate variable to set, in order +% to define the dead margin is the generic length |\DeadMargin|, +% regardless of whether the call is to save a figure or a table box. The +% calculated caption width is stored in the length variable +% |\CaptionBoxWidth|. This length variable is ephemeral, being updated +% with each new figure or table generated, and so it is up to the user to +% save the value of |\CaptionBoxWidth| somewhere else if it is to be used +% to later define a recited box's caption width. Likewise, while +% |\SaveCBox| does not even deal with the box's caption text per se, it +% is the user's responsibility to save the actual caption somewhere, for +% later recitation. +% +% \DescribeMacro{\ReciteTable} +% \DescribeMacro{\ReciteFigure} +% Reciting stored tables or figures is accomplished by way of +% |\ReciteTable| and |\ReciteFigure|. As the [optional] first of their +% four arguments, they take the location directive for placement on the +% page (e.g., |h|, |t|, |b|, or |p|). Both the caption and the caption +% width arguments may be specified directly, or indirectly by way of a +% stored string and length variable, respectively. The command argument +% to these macros must be the bin for the saved box object that +% constitutes the actual table or figure data. +% +% If one desires, the |\Recite...| commands may be used repeatedly to +% print a given table or figure multiple times. However, any |\label| +% associated with the [repeatedly recited] caption will be reassigned to +% the most recent invocation of the |\Recite...| call. Thus, references +% to the table or figure number by way of a |\ref| call are likely to +% produce an undesired result, if a given table or figure is recited +% multiple times. +% +% \DescribeMacro{\theClearedTable} +% \DescribeMacro{\theClearedFigure} +% Finally, two very useful routines to be familiar with are the +% |\theClearedTable| and |\theClearedFigure| macros. These are the +% routines which are repeatedly called by |\clearTables| and +% |\clearFigures|, respectively, to print out all tables and figures +% which have been ``on hold.'' The manner in which |boxhandler| clears +% them is one per page, vertically centered. It is easy to envision +% applications in which the method of clearing would take on a different +% appearance than this. To change the appearance by which tables and/or +% figures are cleared, these commands need to be redefined by the user by +% way of a |\renewcommand|. For reference, the |\theClearedTable| +% command is defined by |boxhandler| as: +% +%| |\\ +%|\newcommand\theClearedTable[4][h]{|\\ +%| \vspace*{\fill}|\\ +%| \ReciteTable[#1]{#2}{#3}{#4}|\\ +%| \vspace*{\fill}|\\ +%| \clearpage|\\ +%|}|\\ +% +% As one can see, |\theClearedTable| is a call to |\ReciteTable| that is +% surrounded by the code necessary to place the table recitation at the +% desired location upon the page. |\theClearedFigure| is defined +% analogously. Modification of this layout should be straightforward for +% the user. For example, if it were desired to have two tables per page +% during the clearing process, one might use the following renewal: +% +%| |\\ +%|\newcounter{toggle} \setcounter{toggle}{0}|\\ +%|\renewcommand\theClearedTable[4][h]{|\\ +%| \addtocounter{toggle}{1}|\\ +%| \ifnum \arabic{toggle} = 2 \setcounter{toggle}{0} \fi|\\ +%| \ifnum \arabic{toggle} = 1|\\ +%| \ReciteTable[t]{#2}{#3}{#4}|\\ +%| \else|\\ +%| \ReciteTable[b]{#2}{#3}{#4}|\\ +%| \clearpage|\\ +%| \fi|\\ +%|}| +% +% \section {Examples} +% +%% Examples of a number of calls provided in this style are given below, +%% in no particular order: +%% +%%| |\\ +%%|\bxtable[t] |\\ +%%| {This is a test of nonwrapping caption\label{tb:mytable}} |\\ +%%| { |\\ +% \iffalse +%<package>%%| \begin{tabular}{|c|c|c|} |\\ +% \fi +%| \begin{tabular}{|\verb,|c|c|c|,|} |\\ +%%| \hline |\\ +%%| column 1 data & 2nd column data & and the third column data\\|\\ +%%| \hline |\\ +%%| \end{tabular} |\\ +%%| } |\\ +%%| |\\ +%%|\usepackage{graphicx} |\\ +%%|\bxfigure[h] |\\ +%%| {Here is an example of a particularly long caption that will |\\ +%%| test wrapping} |\\ +%%| {\includegraphics[width=3.64in,height=4.30in]{Atest1.eps}} |\\ +%%| |\\ +%%|\relaxCaptionWidth[2in] |\\ +%%| |\\ +%%|\captionStyle{}{c} |\\ +%%| |\\ +%%|\setlength\captionGap{3ex} |\\ +%%| |\\ +%%|\setcounter{abovecaptionskipterm}{10} |\\ +%%|\setcounter{belowcaptionskipterm}{0} |\\ +%%| |\\ +%%|\TableFontSize\normalsize |\\ +%%| |\\ +%%|\LRFigurePlacement{flushleft} |\\ +%%| |\\ +%%|\killtableofcontents |\\ +%%| |\\ +%%|\holdFigures |\\ +%%| |\\ +%%|\clearFigures |\\ +%%| |\\ +%%|\newsavebox{\mybox} |\\ +%%|\SaveCBox{\mybox}{\framebox(200,100){Ack!}} |\\ +%%| |\\ +%%|\ReciteFigure[h]{\figcapii}{\figii}{\figcapwdthii} |\\ +%% +% \section {Vestigials} +% +% \DescribeMacro{\arltable} +% \DescribeMacro{\arlfigure} +% In order to retain backward compatibility with the predecessor to the +% |boxhandler| package, the vestigial commands |\arltable| and +% |\arlfigure| are defined in this package, and are equivalent to +% |\bxtable| and |\bxfigure|, respectively. +% +% As an historical note, the genesis of the |boxhandler| package was a +% requirement to comply with my organization's caption style (``offset'' +% style, ``left'' aligned) specified for its technical reports. Various +% kludges were out there to handle it, requiring a fair amount of +% case-specific hand-holding and babysitting, depending on the specifics +% of the figure/table box and the caption. |boxhandler| was intended to +% simplify and generalize the approach. +% +% The figure/table deferral features of |boxhandler| were borne of my own +% laziness. I just didn't relish keeping two different versions of the +% same document up to date... one for my organization, and the other as a +% manuscript for possible journal submission. The |\bx...| commands +% provided an easier ``hook'' through which to achieve the holding and +% clearing of boxes than did any attempt to muck with the underlying +% |Figure| and |Table| environments of \LaTeX{}. +% +% \section {Salutations} +% That's it for a description of |boxhandler|! I hope the package +% provides you some utility. The only thing left is the code listing +% itself. +% \StopEventually{} +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +% \vspace{-0.8em} +% \begin{macro}{boxhandler.sty} +% \section{Code Listing} +% I'll try to lay out herein +% the workings of the |boxhandler| style package. I apologize if +% the code fails in some way to conform to \LaTeX{} programming +% conventions. I am but an enthusiastic novice. +% \begin{macrocode} +%<*package> +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{pbox} +% This package makes use of the |pbox| style package to aid in the +% boxing of captions. +% \begin{macrocode} +\usepackage{pbox} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{TableIndex} +% \begin{macro}{FigureIndex} +% \begin{macro}{TableClearedIndex} +% \begin{macro}{FigureClearedIndex} +% We start by defining and initializing the counters that keep track of +% how many tables and figures have been created and how many have been +% cleared (i.e., printed out). +% \begin{macrocode} +\newcounter{TableIndex} \setcounter{TableIndex}{0} +\newcounter{FigureIndex} \setcounter{FigureIndex}{0} +\newcounter{TableClearedIndex} \setcounter{TableClearedIndex}{0} +\newcounter{FigureClearedIndex} \setcounter{FigureClearedIndex}{0} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\old@makecaption} +% \begin{macro}{\oldabovecaptionskip} +% \begin{macro}{\oldbelowcaptionskip} +% Here, we save the prevailing definitions of |\@makecaption|, +% |\abovecaptionskip| and |\belowcaptionskip|, so that they can be +% altered before and restored after every invocation of |\bxtable| and +% |\bxfigure|. +% \begin{macrocode} +\let\old@makecaption \@makecaption% SAVE PREVAILING \@makecaption STYLE +\newlength\oldabovecaptionskip +\setlength\oldabovecaptionskip \abovecaptionskip +\newlength\oldbelowcaptionskip +\setlength\oldbelowcaptionskip \belowcaptionskip +% \end{macrocode} +% \end{macro} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\captionGap} +% Initialize |\captionGap| to 1ex, which sets the horizontal space +% between the caption label and the caption box for offset-style +% captions. +% \begin{macrocode} +%% \captionGap CAN BE INCREASED TO PLACE MORE SPACE BETWEEN THE CAPTION +%% LABEL AND THE ACTUAL CAPTION TEXT. +\newlength\captionGap \setlength\captionGap{1ex} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\TableDeadMargin} +% \begin{macro}{\FigureDeadMargin} +% The default values for the dead margin around tables and figures is +% initialized here. The value of 0.375em for tables corresponds to what +% the |tabular| environment seems to produce. No presupposition is made +% on what the dead margin is for the figure environment, however. +% \begin{macrocode} +%% \TableDeadMargin AND \FigureDeadMargin REFER TO THE TABLE & FIGURE +%% MARGIN OF A BOX THAT COUNTS TOWARDS ITS SIZE, BUT IN WHICH NO +%% ACTIVE DATA FALLS; DEADMARGIN ASSUMED ON BOTH LEFT & RIGHT SIDE. +\newlength\TableDeadMargin \setlength\TableDeadMargin{0.375em} +\newlength\FigureDeadMargin \setlength\FigureDeadMargin{0em} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{abovecaptionskipterm} +% \begin{macro}{belowcaptionskipterm} The integer parameters +% |abovecaptionskipterm| and |belowcaptionskipterm| are initialized here. +% They will be used to guide the temporarily alteration of +% |\abovecaptionskip| and |\belowcaptionskip| during invocations of +% |\bxtable| and |\bxfigure|. +% \begin{macrocode} +%% INITIALIZE \above- AND \belowcaptionskip VALUES; CAN BE RESET +%% USED TO SET GAPS ABOVE & BELOW CAPTIONS +\newcounter{abovecaptionskipterm} \setcounter{abovecaptionskipterm}{10} +\newcounter{belowcaptionskipterm} \setcounter{belowcaptionskipterm}{7} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\@minCaptionBoxWidth} +% \begin{macro}{\@minCaptionBoxWidthDefault} +% \begin{macro}{\@maxCaptionBoxWidth} +% \begin{macro}{\@maxCaptionBoxWidthDefault} +% The minimum and maximum allowed width defaults for the caption box are +% defined here. The variables holding the current values of min/max +% caption width are also allocated here. Their values will be set and +% altered through the use of the macros |\relaxCaptionWidth|, +% |\limitCaptionWidth| and |\constrainCaptionWidth|, to be described +% later. +% \begin{macrocode} +%% RESET \@minCaptionBoxWidth TO Default VALUE WITH \relaxCaptionWidth +%% SET \@minCaptionBoxWidth TO USER VALUE WITH \relaxCaptionWidth[<len>] +\newlength\@minCaptionBoxWidth +\newlength\@minCaptionBoxWidthDefault +\setlength\@minCaptionBoxWidthDefault{1in} +%% RESET \@maxCaptionBoxWidth TO Default WITH \limitCaptionWidth +%% SET \@maxCaptionBoxWidth WITH \limitCaptionWidth[<len>] +\newlength\@maxCaptionBoxWidth +\newlength\@maxCaptionBoxWidthDefault +\setlength\@maxCaptionBoxWidthDefault{\textwidth} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% +% \begin{macro}{promptTablesFlag} +% \begin{macro}{promptFiguresFlag} +% \begin{macro}{\holdTables} +% \begin{macro}{\holdFigures} +% |promptTablesFlag| and |promptFiguresFlag| are binary switches to +% define whether calls to |\bxtable| and |\bxfigure| are cleared (i.e., +% printed) promptly or merely stored for later clearing. The change to +% put them ``on hold'' is actuated by the |\holdTables| and +% |\holdFigures| commands, respectively. Because the associated +% |\clear...| commands were written with FIFO logic, no mechanism is +% provided to reset the flags to ``prompt'', once set to ``on hold.'' +% Even so, tables and figures can be cleared in sub-batches, by issuing a +% series of |\clear...| commands at intermediate points in the document. +% \begin{macrocode} +%% DEFINE promptTablesFlag & PROVIDE ROUTINE TO CHANGE IT FROM +%% "PROMPT"(1) TO "ON HOLD"(0) +\newcounter{promptTablesFlag} \setcounter{promptTablesFlag}{1} +\newcommand\holdTables{\setcounter{promptTablesFlag}{0}} +%% SAME FOR promptFiguresFlag +\newcounter{promptFiguresFlag} \setcounter{promptFiguresFlag}{1} +\newcommand\holdFigures{\setcounter{promptFiguresFlag}{0}} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\CaptionFontSize} +% \begin{macro}{\TableFontSize} +% Default size of font in both captions and tables is, by default, +% |\small|. However, these variables allow those defaults to be reset to +% the desired font size. +% \begin{macrocode} +%% DEFAULT CaptionFontSize & TableFontSize AS \small; CAN BE RESET +\let \CaptionFontSize \small +\let \TableFontSize \small +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\LRTablePlacement} +% \begin{macro}{\LRFigurePlacement} +% These variables set the placement of the table or figure either flushed +% to the left or right margin, or else centered between the margins (the +% default). They can be reset by the user. +% \begin{macrocode} +%% DEFAULT TABLE & FIGURE LR ALIGNMENT TO center; +%% CAN RESET TO flushleft/-right +\def \LRTablePlacement {center} +\def \LRFigurePlacement {center} +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\CaptionJustification} +% The flushing of the actual text within the caption box may be +% accomplished by setting |\CaptionJustification|. When it is defined +% as |{}| (the default), the caption is fully justified (i.e., +% flushed) within the caption box. It may also be set to +% |{\raggedleft}|, |{\raggedright}| or |{\centering}|. +% \begin{macrocode} +%% WITHIN-CAPTION JUSTIFICATION CAN BE SET +%% OPTIONS: {}, {\raggedleft}, {\raggedright}, or {\centering} +\def\CaptionJustification{} % <---DEFAULT IS FULL JUSTIFICATION +% \end{macrocode} +% \end{macro} +% +%\vspace{2em} +% \begin{macro}{\DeadMargin} +% \begin{macro}{\CaptionBoxWidth} +% \begin{macro}{\@DataBoxWidth} +% \begin{macro}{\@DataBoxOffset} +% \begin{macro}{\@CaptionBoxOffset} +% \begin{macro}{\@captionIDwidth} +% \begin{macro}{\@captionWidth} +% \begin{macro}{\@DataBoxSurplus} +% New working variables are defined here. All are |@|-protected from +% access except for |\DeadMargin| and |\CaptionBoxWidth|, which have been +% made accessible for so-called ``Advanced Use.'' +% |\DeadMargin| is the low-level variable where the dead margin of the +% current figure or table box is specified by the advanced user. +% |\@DataBoxWidth| is the calculated width of the data-box portion of +% the current table or figure. +% |\CaptionBoxWidth| is the calculated width of the caption box for the +% current figure, taking into account the dead margin as well as the +% min/max allowed caption widths. The ``advanced user'' can save this +% datum for future figure/table recitation. +% |\@DataBoxOffset| is the calculated spacer length that must be added to +% both sides of the data box to bring it to the size of the caption box. +% It will be zeroed, if the data box width exceeds the caption box width. +% |\@CaptionBoxOffset| is the calculated spacer length that must be added +% to both sides of the caption box to bring it to the size of the data +% box. It will be zeroed, if the caption box width exceeds the data box +% width. +% |\@captionIDwidth| is used for offset-style captions, and is the width +% of the caption ID plus the caption gap (e.g., the width of +% ``Figure 4.~~''). +% |\@captionWidth| is, for offset-style captions, simply +% |\CaptionBoxWidth| minus |\@captionIDwidth|; this value equals the +% width of the |\parbox| which is used for the caption text in +% offset-style captions. Finally, +% |\@DataBoxSurplus| is the excess of data box width over the caption box +% width. It can be positive or negative, depending on whether the data +% box or caption box is larger. +% \begin{macrocode} +%% WORKING VARIABLES +\newlength\DeadMargin +\newlength\@DataBoxWidth +\newlength\CaptionBoxWidth +\newlength\@DataBoxOffset +\newlength\@CaptionBoxOffset +\newlength\@captionIDwidth +\newlength\@captionWidth +\newlength\@DataBoxSurplus + +% \end{macrocode} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\bxtable} +% The routine |\bxtable| will store the specified table. If +% |promptTablesFlag| equals unity, the table will also be immediately +% cleared using the specified \textit{loc} parameter. If +% |\roman{TableIndex}| equalled, for example, |vii|, then the table data +% would be stored in the box |\tblvii|, the caption text would be stored +% in the pointer |\tblcapvii|, and the calculated caption width would be +% stored in the pointer |\tblcapwdthvii|. +% \begin{macrocode} +\newcommand\bxtable[3][t]{ + \StoreTable[#1]{#2}{#3} + \ifnum \arabic{promptTablesFlag} = 1 + \addtocounter{TableClearedIndex}{1} + \def\TableBoxLabel{tbl\roman{TableIndex}} + \def\TableCaptionLabel{tblcap\roman{TableIndex}} + \def\TblCaptionWidthLabel{tblcapwdth\roman{TableIndex}} + \ReciteTable[#1]{\csname\TableCaptionLabel\endcsname} + {\csname\TableBoxLabel\endcsname} + {\csname\TblCaptionWidthLabel\endcsname} + \fi +} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\StoreTable} +% |\StoreTable| calculates the names of the pointers where the +% table-data, -caption, and -width will be stored, and calls upon the +% low-level |\SaveCbox| routine to actually save the tabular data and +% compute the caption width. It finally stores the caption text itself +% and the calculated caption width. Note that the optional first +% argument, \textit{loc}, is a dummy argument that is not used here. +% \begin{macrocode} +\newcommand\StoreTable[3][]{ + \addtocounter{TableIndex}{1} + \setlength\DeadMargin\TableDeadMargin + \def\TableBoxLabel{tbl\roman{TableIndex}} + \def\TableCaptionLabel{tblcap\roman{TableIndex}} + \def\TblCaptionWidthLabel{tblcapwdth\roman{TableIndex}} + \expandafter\SaveCBox\csname\TableBoxLabel\endcsname{\TableFontSize#3} + \expandafter\def\csname\TableCaptionLabel\endcsname{#2} + \expandafter\newlength\csname\TblCaptionWidthLabel\endcsname + \expandafter\setlength\csname\TblCaptionWidthLabel\endcsname + \CaptionBoxWidth +} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\ReciteTable} +% The |\ReciteTable| routine recites a previously stored table, using the +% pointers that are provided as arguments. First, the |\Table| +% environment is invoked, and the left/right table-placement environment +% is opened. The routine then defines new definitions for +% |\@makecaption|, |\abovecaptionskip| and |\belowcaptionskip|. It then +% uses the provided pointers to set the data-box and caption-box widths, +% and calculates the offsets. It recites the box caption (using the +% caption-box offset, if needed) and then it recites the tabular-data box +% (using the data-box offset, if needed). The original definitions for +% |\@makecaption|, |\abovecaptionskip| and |\belowcaptionskip| are +% restored, the table placement environment is concluded and the table +% itself is ended. +% \begin{macrocode} +\newcommand\ReciteTable[4][h]{ + \begin{table}[#1] + \begin{\LRTablePlacement} + \let\@makecaption \new@makecaption + \setlength\abovecaptionskip{\arabic{abovecaptionskipterm}\p@} + \setlength\belowcaptionskip{\arabic{belowcaptionskipterm}\p@} + \set@DataBoxWidth{#3} + \setlength\CaptionBoxWidth{#4} + \set@BoxOffsets + \rule{\@CaptionBoxOffset}{0em}% + \parbox{\CaptionBoxWidth}{\caption {#2}}% + \rule{\@CaptionBoxOffset}{0em}% + \par + \rule{\@DataBoxOffset}{0in}% + \usebox{#3} + \rule{\@DataBoxOffset}{0in}% + \let\@makecaption \old@makecaption + \setlength\abovecaptionskip \oldabovecaptionskip + \setlength\belowcaptionskip \oldbelowcaptionskip + \end{\LRTablePlacement} + \end{table} +} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\clearTables} +% This routine will clear all stored tables that have not yet been +% printed. It assumes a FIFO logic. It starts by clearing the page and +% clearing the List of Tables (i.e., prints the \textit{lot} \textbf{if} +% the List of Tables had been put on hold, and subsequently invoked while +% ``on hold''). If the \textit{lot} had previously been killed, then +% |\clearlistoftables| will have no effect. Once the \textit{lot} has +% been cleared (or not), a loop is set up in which the names of +% stored-table pointers are reconstructed, and successively passed to +% |\theClearedTable| which defines the format for clearing and actually +% calls for the table to be recited. +% \begin{macrocode} +\newcommand\clearTables{ + \clearpage + \clearlistoftables + \clearpage +%%DO UNTIL ALL HELD TABLES ARE CLEARED + \whiledo{\arabic{TableClearedIndex} < \arabic{TableIndex}}{ + \addtocounter{TableClearedIndex}{1} +%% \TableBoxLabel : tbli, tblii, tbliii, tbliv, etc. +%% \TableCaptionLabel : tblcapi, tblcapii, tblcapiii, tblcapiv, etc. +%% \TblCaptionWidthLabel: tblcapwdthi, tblcapwdthii, tblcapwdthiii,etc. + \def\TableBoxLabel{tbl\roman{TableClearedIndex}} + \def\TableCaptionLabel{tblcap\roman{TableClearedIndex}} + \def\TblCaptionWidthLabel{tblcapwdth\roman{TableClearedIndex}} + \theClearedTable{\csname\TableCaptionLabel\endcsname} + {\csname\TableBoxLabel\endcsname} + {\csname\TblCaptionWidthLabel\endcsname} + } +} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\theClearedTable} +% Quite simply, this routine prints out each table to be cleared, one per +% page, vertically centered. It can be renewed by the user if a +% different clearing format is desired. +% \begin{macrocode} +%% \theClearedTable CAN BE RENEWED IF DIFFERENT OUTPUT FORMAT IS DESIRED +\newcommand\theClearedTable[4][h]{ +%% CLEAR THIS TABLE ON A PAGE BY ITSELF, CENTERED VERTICALLY + \vspace*{\fill} + \ReciteTable[#1]{#2}{#3}{#4} + \vspace*{\fill} + \clearpage +} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\bxfigure} +% This routine is analogous to |\bxtable| in every way. For figures, the +% pointers which save the figure use a |\fig-| prefix, instead of a +% |\tbl-| prefix. +% \begin{macrocode} +\newcommand\bxfigure[3][t]{ + \StoreFigure[#1]{#2}{#3} + \ifnum \arabic{promptFiguresFlag} = 1 + \addtocounter{FigureClearedIndex}{1} + \def\FigureBoxLabel{fig\roman{FigureIndex}} + \def\FigureCaptionLabel{figcap\roman{FigureIndex}} + \def\FigCaptionWidthLabel{figcapwdth\roman{FigureIndex}} + \ReciteFigure[#1]{\csname\FigureCaptionLabel\endcsname} + {\csname\FigureBoxLabel\endcsname} + {\csname\FigCaptionWidthLabel\endcsname} + \fi +} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\StoreFigure} +% This routine is analogous to |\StoreTable| in every way. +% \begin{macrocode} +\newcommand\StoreFigure[3][]{ + \addtocounter{FigureIndex}{1} + \setlength\DeadMargin\FigureDeadMargin + \def\FigureBoxLabel{fig\roman{FigureIndex}} + \def\FigureCaptionLabel{figcap\roman{FigureIndex}} + \def\FigCaptionWidthLabel{figcapwdth\roman{FigureIndex}} + \expandafter\SaveCBox\csname\FigureBoxLabel\endcsname{#3} + \expandafter\def\csname\FigureCaptionLabel\endcsname{#2} + \expandafter\newlength\csname\FigCaptionWidthLabel\endcsname + \expandafter\setlength\csname\FigCaptionWidthLabel\endcsname + \CaptionBoxWidth +} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\ReciteFigure} +% This routine is analogous to |\ReciteTable| in every way, except one. +% In the case of |\ReciteFigure|, the figure-data box is output +% \textbf{before} the caption, not after. +% \begin{macrocode} +\newcommand\ReciteFigure[4][h]{ + \begin{figure}[#1] + \begin{\LRFigurePlacement} + \let\@makecaption \new@makecaption + \setlength\abovecaptionskip{\arabic{abovecaptionskipterm}\p@} + \setlength\belowcaptionskip{\arabic{belowcaptionskipterm}\p@} + \set@DataBoxWidth{#3} + \setlength\CaptionBoxWidth{#4} + \set@BoxOffsets + \rule{\@DataBoxOffset}{0in}% + \usebox{#3}% + \rule{\@DataBoxOffset}{0in}% + \par + \rule{\@CaptionBoxOffset}{0em}% + \parbox{\CaptionBoxWidth}{\caption {#2}}% + \rule{\@CaptionBoxOffset}{0em}% + \let\@makecaption \old@makecaption + \setlength\abovecaptionskip \oldabovecaptionskip + \setlength\belowcaptionskip \oldbelowcaptionskip + \end{\LRFigurePlacement} + \end{figure} +} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\clearFigures} +% This routine is analogous to |\clearTables| in every way. +% \begin{macrocode} +\newcommand\clearFigures{ + \clearpage + \clearlistoffigures + \clearpage +%%DO UNTIL ALL HELD FIGURES ARE CLEARED + \whiledo{\arabic{FigureClearedIndex} < \arabic{FigureIndex}}{ + \addtocounter{FigureClearedIndex}{1} +%% \FigureBoxLabel: : figi, figii, figiii, figiv, etc. +%% \FigureCaptionLabel : figcapi, figcapii, figcapiii, figcapiv, etc. +%% \FigCaptionWidthLabel: figcapwdthi, figcapwdthii, figcapwdthiii,etc. + \def\FigureBoxLabel{fig\roman{FigureClearedIndex}} + \def\FigureCaptionLabel{figcap\roman{FigureClearedIndex}} + \def\FigCaptionWidthLabel{figcapwdth\roman{FigureClearedIndex}} + \theClearedFigure{\csname\FigureCaptionLabel\endcsname} + {\csname\FigureBoxLabel\endcsname} + {\csname\FigCaptionWidthLabel\endcsname} + } +} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\theClearedFigure} +% This routine is analogous to |\theClearedTable| in every way... one +% figure per page, vertically centered. +% \begin{macrocode} +%% \theClearedFigure CAN BE RENEWED IF DIFFERENT OUTPUT FORMAT DESIRED +\newcommand\theClearedFigure[4][h]{ +%% CLEAR THIS FIGURE ON A PAGE BY ITSELF, CENTERED VERTICALLY + \vspace*{\fill} + \ReciteFigure[#1]{#2}{#3}{#4} + \vspace*{\fill} + \clearpage +} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\relaxCaptionWidth} +% This routine sets the minimum permitted caption width. When called +% with no argument, it resets the min caption width to its 1 inch default +% value. If necessary, the maximum allowed caption width will be bumped +% up, so as to remain greater than or equal the minimum allowed caption +% width. +% \begin{macrocode} +\newcommand\relaxCaptionWidth[1][\@minCaptionBoxWidthDefault]{ + \setlength\@minCaptionBoxWidth{#1} + \ifdim \@minCaptionBoxWidth > \@maxCaptionBoxWidth + \setlength\@maxCaptionBoxWidth\@minCaptionBoxWidth + \fi +} +\relaxCaptionWidth% SET INITIAL \@minCaptionBoxWidth TO DEFAULT VALUE + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\limitCaptionWidth} +% This routine sets the maximum permitted caption width. When called +% with no argument, it resets the max caption width to its default value +% of |\textwidth|. If necessary, the minimum allowed caption width will +% be reduced, so as to remain less than or equal the maximum allowed +% caption width. +% \begin{macrocode} +\newcommand\limitCaptionWidth[1][\@maxCaptionBoxWidthDefault]{ + \setlength\@maxCaptionBoxWidth{#1} + \ifdim \@maxCaptionBoxWidth < \@minCaptionBoxWidth + \setlength\@minCaptionBoxWidth\@maxCaptionBoxWidth + \fi +} +\limitCaptionWidth% SET INITIAL \@maxCaptionBoxWidth TO DEFAULT VALUE + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\constrainCaptionWidth} +% Straightforward code to set both min- and max-allowed caption widths. +% Only twist: if only one argument given, both min- and max-caption +% widths set to that value. +% \begin{macrocode} +\newcommand\constrainCaptionWidth[2][-1in]{ + \ifdim #1 < 0in + \setlength\@minCaptionBoxWidth{#2} + \setlength\@maxCaptionBoxWidth{#2} + \else + \ifdim #1 < #2 + \setlength\@minCaptionBoxWidth{#1} + \setlength\@maxCaptionBoxWidth{#2} + \else + \setlength\@minCaptionBoxWidth{#2} + \setlength\@maxCaptionBoxWidth{#1} + \fi + \fi +} + +% \end{macrocode} +% \end{macro} +% +%\vspace{1em} +% \begin{macro}{\SaveCBox} +% Low-level routine to save box data in an |sbox|. Also, calculates data +% box width and associated caption box width. +% \begin{macrocode} +\newcommand\SaveCBox[2]{ + \newsavebox{#1} + \sbox{#1}{#2} + \set@BoxWidths{#1} +} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\set@BoxWidths} +% Call successive routines to define |\@DataBoxWidth| and +% |\CaptionBoxWidth|. +% \begin{macrocode} +\newcommand\set@BoxWidths[1]{% of DataBox & CaptionBox (-2\DeadMargin) + \set@DataBoxWidth{#1} + \set@CaptionBoxWidth +} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\set@DataBoxWidth} +% Calculate and set data-box width. +% \begin{macrocode} +\newcommand\set@DataBoxWidth[1]{ + \setlength {\@DataBoxWidth}{\widthof{\usebox{#1}}} +} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\set@CaptionBoxWidth} +% Calculate and set caption-box width, subject to constraints of dead +% margin as well as caption-box min/max allowable widths. +% \begin{macrocode} +\newcommand\set@CaptionBoxWidth{ + \setlength\CaptionBoxWidth\@DataBoxWidth + \addtolength{\CaptionBoxWidth}{-2\DeadMargin} + \ifdim \CaptionBoxWidth < \@minCaptionBoxWidth + \setlength\CaptionBoxWidth\@minCaptionBoxWidth + \fi + \ifdim \CaptionBoxWidth > \@maxCaptionBoxWidth + \setlength\CaptionBoxWidth\@maxCaptionBoxWidth + \fi +} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\set@BoxOffsets} +% Calculate |\DataBoxSurplus| which holds the excess width of the data +% box with respect to the associated caption box. Use it to set +% |\@DataBoxOffset| and |\@CaptionBoxOffset|. +% \begin{macrocode} +\newcommand\set@BoxOffsets{ + \setlength\@DataBoxSurplus{\@DataBoxWidth} + \addtolength\@DataBoxSurplus{-\CaptionBoxWidth} + \ifdim \@DataBoxSurplus > 0in + \setlength\@CaptionBoxOffset{0.5\@DataBoxSurplus} + \setlength\@DataBoxOffset{0in} + \else + \setlength\@CaptionBoxOffset{0in} + \setlength\@DataBoxOffset{-0.5\@DataBoxSurplus} + \fi +} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\offset@caption} +% \begin{macro}{\nooffset@caption} +% Define the code for placing offset- and nooffset-captions in the +% caption box. +% \begin{macrocode} +\long\def\offset@caption#1#2{ + \setlength\@captionIDwidth{\widthofpbox{\CaptionFontSize{#1.}}} + \addtolength\@captionIDwidth\captionGap + \setlength\@captionWidth\CaptionBoxWidth + \addtolength\@captionWidth{-\@captionIDwidth} + \CaptionFontSize{#1.}\hfill\parbox[t]{\@captionWidth} + {\CaptionJustification\CaptionFontSize{#2.}}% +} + +\long\def\nooffset@caption#1#2{% + \CaptionJustification\CaptionFontSize #1.\rule{\captionGap}{0in}#2.% +} + +% \end{macrocode} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\shortleft@caption} +% \begin{macro}{\shortcenter@caption} +% \begin{macro}{\shortright@caption} +% Define the code for placing short-left, -center, and -right +% captions in the caption box. +% \begin{macrocode} +\long\def\shortleft@caption#1#2{% + \raggedright \CaptionFontSize #1.\rule{\captionGap}{0in}#2.% +} + +\long\def\shortcenter@caption#1#2{% + \centering \CaptionFontSize #1.\rule{\captionGap}{0in}#2.% +} + +\long\def\shortright@caption#1#2{% + \raggedleft \CaptionFontSize #1.\rule{\captionGap}{0in}#2.% +} + +% \end{macrocode} +% \end{macro} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\new@makecaption} +% Define the new |@makecaption| code, which is defined in terms of +% long- and short-caption definitions, that can be changed on the fly. +% \begin{macrocode} +\long\def\new@makecaption#1#2{% + \vskip\abovecaptionskip + \sbox\@tempboxa{\CaptionFontSize #1.\rule{\captionGap}{0in}#2.}% + \ifdim \wd\@tempboxa >\hsize + \long@caption{#1}{#2} + \else + \short@caption{#1}{#2} + \fi + \vskip\belowcaptionskip +} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\captionStyle} +% \begin{macro}{\long@caption} +% \begin{macro}{\short@caption} +% Define the user routine |\captionStyle|, which allows the user to +% redefine the captions styles for long and short captions, +% respectively. +% \begin{macrocode} +\newcommand\captionStyle[2]{ + \if o#1 \let\long@caption \offset@caption \fi + \if n#1 \let\long@caption \nooffset@caption \fi + \if l#2 \let\short@caption \shortleft@caption \fi + \if c#2 \let\short@caption \shortcenter@caption \fi + \if r#2 \let\short@caption \shortright@caption \fi +} + +% \end{macrocode} +% \end{macro} +% \end{macro} +% \end{macro} +% +% Define the default value for caption style, which is offset-style, +% left-aligned. +% \begin{macrocode} +%% SET DEFAULT CAPTION STYLE: CAPTION ID OFFSET FOR LONG CAPTIONS, +%% SHORT CAPTIONS LEFT ALIGNED +\captionStyle{o}{l} + +% \end{macrocode} +% +% \begin{macro}{\killtableofcontents} +% Kills subsequent calls for the Table of Contents by renewing the +% command as null. +% \begin{macrocode} +\newcommand\killtableofcontents{ + \renewcommand\tableofcontents{} +} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{lofInvocations} +% \begin{macro}{lofprints} +% \begin{macro}{\oldlistoffigures} +% Set up for \textit{lof} handling, by preparing to count invocations of +% \textit{lof}, the number of times the \textit{lof} is printed, and by +% saving prevailing definition of |\listoffigures|. +% \begin{macrocode} +%%LIST OF FIGURES HANDLING: +\newcounter{lofInvocations} \setcounter{lofInvocations}{0} +\newcounter{lofPrints} \setcounter{lofPrints}{0} +\let\oldlistoffigures\listoffigures + +% \end{macrocode} +% \end{macro} +% \end{macro} +% \end{macro} +% +% \begin{macro}{\killlistoffigures} +% Kills subsequent calls for List of Figures by renewing the command (and +% redefining the saved command) as null. +% \begin{macrocode} +\newcommand\killlistoffigures{ + \def\oldlistoffigures {} + \renewcommand\listoffigures{} +} + +% \end{macrocode} +% \end{macro} +% +%\vspace{2em} +% \begin{macro}{\holdlistoffigures} +% To put the \textit{lof} ``on hold,'' we merely redefine +% |\listoffigures| to increment the |lofInvocations| counter. +% \begin{macrocode} +\newcommand\holdlistoffigures{ + \renewcommand\listoffigures{\addtocounter{lofInvocations}{1}} +} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\clearlistoffigures} +% This routine will clear (i.e., print) the List of Figures the number of +% times it was invoked while ``on hold'' (most likely 0 or 1 time). It +% does this by incrementing |lofPrints| until it reaches a value of +% |lofInvocations|. +% \begin{macrocode} +\newcommand\clearlistoffigures{ + \whiledo{\arabic{lofPrints} < \arabic{lofInvocations}}{ + \addtocounter{lofPrints}{1} + \oldlistoffigures + } +} + +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{lotInvocations} +% \begin{macro}{lotPrints} +% \begin{macro}{\oldlistoftables} +% \begin{macro}{\killlistoftables} +% \begin{macro}{\holdlistoftables} +% \begin{macro}{\clearlistoftables} +% List of Tables handling is wholly analogous to List of Figures handling +% just described. +% \begin{macrocode} +%%LIST OF TABLES HANDLING: +\newcounter{lotInvocations} \setcounter{lotInvocations}{0} +\newcounter{lotPrints} \setcounter{lotPrints}{0} +\let\oldlistoftables\listoftables + +\newcommand\killlistoftables{ + \def\oldlistoftables {} + \renewcommand\listoftables{} +} + +\newcommand\holdlistoftables{ + \renewcommand\listoftables{\addtocounter{lotInvocations}{1}} +} + +\newcommand\clearlistoftables{ + \whiledo{\arabic{lotPrints} < \arabic{lotInvocations}}{ + \addtocounter{lotPrints}{1} + \oldlistoftables + } +} + +% \end{macrocode} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% \end{macro} +% +% \begin{macro}{arltable} +% \begin{macro}{arlfigure} +% To retain backward compatibility to the simpler predecessor of the +% |boxtable| package, the vestigial commands |\arltable| and |\arlfigure| +% are provided. Their definitions are directly linked to |\bxtable| and +% |\bxfigure|. +% \begin{macrocode} +%% TO RETAIN BACKWARD COMPATIBILITY WITH THE PREDECESSOR TO boxtable, +%% THE FOLLOWING ASSIGNMENTS ARE MADE. +\let\arltable\bxtable +\let\arlfigure\bxfigure + +% \end{macrocode} +% \end{macro} +% \end{macro} +% We are done now. +% \begin{macrocode} +%</package> +% \end{macrocode} +% +% \Finale +\endinput +% +%End of file `boxhandler.dtx'. diff --git a/Master/texmf-dist/source/latex/boxhandler/boxhandler.ins b/Master/texmf-dist/source/latex/boxhandler/boxhandler.ins new file mode 100644 index 00000000000..f382a6296ba --- /dev/null +++ b/Master/texmf-dist/source/latex/boxhandler/boxhandler.ins @@ -0,0 +1,6 @@ +% LaTeX this .ins file in order to generate the .sty file from the .dtx file +\input docstrip +\askforoverwritefalse +\generate{\file{boxhandler.sty}{\from{boxhandler.dtx}{package}} + } +\endbatchfile diff --git a/Master/texmf-dist/tex/latex/boxhandler/boxhandler.sty b/Master/texmf-dist/tex/latex/boxhandler/boxhandler.sty new file mode 100644 index 00000000000..136171eaacc --- /dev/null +++ b/Master/texmf-dist/tex/latex/boxhandler/boxhandler.sty @@ -0,0 +1,464 @@ +%% +%% This is file `boxhandler.sty', +%% generated with the docstrip utility. +%% +%% The original source files were: +%% +%% boxhandler.dtx (with options: `package') +%% +%% IMPORTANT NOTICE: +%% +%% For the copyright see the source file. +%% +%% Any modified versions of this file must be renamed +%% with new filenames distinct from boxhandler.sty. +%% +%% For distribution of the original source see the terms +%% for copying and modification in the file boxhandler.dtx. +%% +%% This generated file may be distributed as long as the +%% original source files, as listed above, are part of the +%% same distribution. (The sources need not necessarily be +%% in the same archive or directory.) +%% +%% boxhandler.sty +%% Copyright Steven B. Segletes. +%% +%% This file may be redistributed and/or modified with attribution. +%% +%% This is boxhandler.sty, derived from earlier incarnations of savcap.sty & +%% arlcaptions.sty. +%% +\ProvidesPackage{boxhandler} +[2006/04/24 v1.03 + Flexible Captioning Styles and Deferred Box/List Printing] +\NeedsTeXFormat{LaTeX2e} +%% Examples of a number of calls provided in this style are given below, +%% in no particular order: +%% +%%| |\\ +%%|\bxtable[t] |\\ +%%| {This is a test of nonwrapping caption\label{tb:mytable}} |\\ +%%| { |\\ +%%| \begin{tabular}{|c|c|c|} |\\ +%%| \hline |\\ +%%| column 1 data & 2nd column data & and the third column data\\|\\ +%%| \hline |\\ +%%| \end{tabular} |\\ +%%| } |\\ +%%| |\\ +%%|\usepackage{graphicx} |\\ +%%|\bxfigure[h] |\\ +%%| {Here is an example of a particularly long caption that will |\\ +%%| test wrapping} |\\ +%%| {\includegraphics[width=3.64in,height=4.30in]{Atest1.eps}} |\\ +%%| |\\ +%%|\relaxCaptionWidth[2in] |\\ +%%| |\\ +%%|\captionStyle{}{c} |\\ +%%| |\\ +%%|\setlength\captionGap{3ex} |\\ +%%| |\\ +%%|\setcounter{abovecaptionskipterm}{10} |\\ +%%|\setcounter{belowcaptionskipterm}{0} |\\ +%%| |\\ +%%|\TableFontSize\normalsize |\\ +%%| |\\ +%%|\LRFigurePlacement{flushleft} |\\ +%%| |\\ +%%|\killtableofcontents |\\ +%%| |\\ +%%|\holdFigures |\\ +%%| |\\ +%%|\clearFigures |\\ +%%| |\\ +%%|\newsavebox{\mybox} |\\ +%%|\SaveCBox{\mybox}{\framebox(200,100){Ack!}} |\\ +%%| |\\ +%%|\ReciteFigure[h]{\figcapii}{\figii}{\figcapwdthii} |\\ +%% +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +\usepackage{pbox} +\newcounter{TableIndex} \setcounter{TableIndex}{0} +\newcounter{FigureIndex} \setcounter{FigureIndex}{0} +\newcounter{TableClearedIndex} \setcounter{TableClearedIndex}{0} +\newcounter{FigureClearedIndex} \setcounter{FigureClearedIndex}{0} +\let\old@makecaption \@makecaption% SAVE PREVAILING \@makecaption STYLE +\newlength\oldabovecaptionskip +\setlength\oldabovecaptionskip \abovecaptionskip +\newlength\oldbelowcaptionskip +\setlength\oldbelowcaptionskip \belowcaptionskip +%% \captionGap CAN BE INCREASED TO PLACE MORE SPACE BETWEEN THE CAPTION +%% LABEL AND THE ACTUAL CAPTION TEXT. +\newlength\captionGap \setlength\captionGap{1ex} +%% \TableDeadMargin AND \FigureDeadMargin REFER TO THE TABLE & FIGURE +%% MARGIN OF A BOX THAT COUNTS TOWARDS ITS SIZE, BUT IN WHICH NO +%% ACTIVE DATA FALLS; DEADMARGIN ASSUMED ON BOTH LEFT & RIGHT SIDE. +\newlength\TableDeadMargin \setlength\TableDeadMargin{0.375em} +\newlength\FigureDeadMargin \setlength\FigureDeadMargin{0em} +%% INITIALIZE \above- AND \belowcaptionskip VALUES; CAN BE RESET +%% USED TO SET GAPS ABOVE & BELOW CAPTIONS +\newcounter{abovecaptionskipterm} \setcounter{abovecaptionskipterm}{10} +\newcounter{belowcaptionskipterm} \setcounter{belowcaptionskipterm}{7} +%% RESET \@minCaptionBoxWidth TO Default VALUE WITH \relaxCaptionWidth +%% SET \@minCaptionBoxWidth TO USER VALUE WITH \relaxCaptionWidth[<len>] +\newlength\@minCaptionBoxWidth +\newlength\@minCaptionBoxWidthDefault +\setlength\@minCaptionBoxWidthDefault{1in} +%% RESET \@maxCaptionBoxWidth TO Default WITH \limitCaptionWidth +%% SET \@maxCaptionBoxWidth WITH \limitCaptionWidth[<len>] +\newlength\@maxCaptionBoxWidth +\newlength\@maxCaptionBoxWidthDefault +\setlength\@maxCaptionBoxWidthDefault{\textwidth} +%% DEFINE promptTablesFlag & PROVIDE ROUTINE TO CHANGE IT FROM +%% "PROMPT"(1) TO "ON HOLD"(0) +\newcounter{promptTablesFlag} \setcounter{promptTablesFlag}{1} +\newcommand\holdTables{\setcounter{promptTablesFlag}{0}} +%% SAME FOR promptFiguresFlag +\newcounter{promptFiguresFlag} \setcounter{promptFiguresFlag}{1} +\newcommand\holdFigures{\setcounter{promptFiguresFlag}{0}} +%% DEFAULT CaptionFontSize & TableFontSize AS \small; CAN BE RESET +\let \CaptionFontSize \small +\let \TableFontSize \small +%% DEFAULT TABLE & FIGURE LR ALIGNMENT TO center; +%% CAN RESET TO flushleft/-right +\def \LRTablePlacement {center} +\def \LRFigurePlacement {center} +%% WITHIN-CAPTION JUSTIFICATION CAN BE SET +%% OPTIONS: {}, {\raggedleft}, {\raggedright}, or {\centering} +\def\CaptionJustification{} % <---DEFAULT IS FULL JUSTIFICATION +%% WORKING VARIABLES +\newlength\DeadMargin +\newlength\@DataBoxWidth +\newlength\CaptionBoxWidth +\newlength\@DataBoxOffset +\newlength\@CaptionBoxOffset +\newlength\@captionIDwidth +\newlength\@captionWidth +\newlength\@DataBoxSurplus + +\newcommand\bxtable[3][t]{ + \StoreTable[#1]{#2}{#3} + \ifnum \arabic{promptTablesFlag} = 1 + \addtocounter{TableClearedIndex}{1} + \def\TableBoxLabel{tbl\roman{TableIndex}} + \def\TableCaptionLabel{tblcap\roman{TableIndex}} + \def\TblCaptionWidthLabel{tblcapwdth\roman{TableIndex}} + \ReciteTable[#1]{\csname\TableCaptionLabel\endcsname} + {\csname\TableBoxLabel\endcsname} + {\csname\TblCaptionWidthLabel\endcsname} + \fi +} + +\newcommand\StoreTable[3][]{ + \addtocounter{TableIndex}{1} + \setlength\DeadMargin\TableDeadMargin + \def\TableBoxLabel{tbl\roman{TableIndex}} + \def\TableCaptionLabel{tblcap\roman{TableIndex}} + \def\TblCaptionWidthLabel{tblcapwdth\roman{TableIndex}} + \expandafter\SaveCBox\csname\TableBoxLabel\endcsname{\TableFontSize#3} + \expandafter\def\csname\TableCaptionLabel\endcsname{#2} + \expandafter\newlength\csname\TblCaptionWidthLabel\endcsname + \expandafter\setlength\csname\TblCaptionWidthLabel\endcsname + \CaptionBoxWidth +} + +\newcommand\ReciteTable[4][h]{ + \begin{table}[#1] + \begin{\LRTablePlacement} + \let\@makecaption \new@makecaption + \setlength\abovecaptionskip{\arabic{abovecaptionskipterm}\p@} + \setlength\belowcaptionskip{\arabic{belowcaptionskipterm}\p@} + \set@DataBoxWidth{#3} + \setlength\CaptionBoxWidth{#4} + \set@BoxOffsets + \rule{\@CaptionBoxOffset}{0em}% + \parbox{\CaptionBoxWidth}{\caption {#2}}% + \rule{\@CaptionBoxOffset}{0em}% + \par + \rule{\@DataBoxOffset}{0in}% + \usebox{#3} + \rule{\@DataBoxOffset}{0in}% + \let\@makecaption \old@makecaption + \setlength\abovecaptionskip \oldabovecaptionskip + \setlength\belowcaptionskip \oldbelowcaptionskip + \end{\LRTablePlacement} + \end{table} +} + +\newcommand\clearTables{ + \clearpage + \clearlistoftables + \clearpage +%%DO UNTIL ALL HELD TABLES ARE CLEARED + \whiledo{\arabic{TableClearedIndex} < \arabic{TableIndex}}{ + \addtocounter{TableClearedIndex}{1} +%% \TableBoxLabel : tbli, tblii, tbliii, tbliv, etc. +%% \TableCaptionLabel : tblcapi, tblcapii, tblcapiii, tblcapiv, etc. +%% \TblCaptionWidthLabel: tblcapwdthi, tblcapwdthii, tblcapwdthiii,etc. + \def\TableBoxLabel{tbl\roman{TableClearedIndex}} + \def\TableCaptionLabel{tblcap\roman{TableClearedIndex}} + \def\TblCaptionWidthLabel{tblcapwdth\roman{TableClearedIndex}} + \theClearedTable{\csname\TableCaptionLabel\endcsname} + {\csname\TableBoxLabel\endcsname} + {\csname\TblCaptionWidthLabel\endcsname} + } +} + +%% \theClearedTable CAN BE RENEWED IF DIFFERENT OUTPUT FORMAT IS DESIRED +\newcommand\theClearedTable[4][h]{ +%% CLEAR THIS TABLE ON A PAGE BY ITSELF, CENTERED VERTICALLY + \vspace*{\fill} + \ReciteTable[#1]{#2}{#3}{#4} + \vspace*{\fill} + \clearpage +} + +\newcommand\bxfigure[3][t]{ + \StoreFigure[#1]{#2}{#3} + \ifnum \arabic{promptFiguresFlag} = 1 + \addtocounter{FigureClearedIndex}{1} + \def\FigureBoxLabel{fig\roman{FigureIndex}} + \def\FigureCaptionLabel{figcap\roman{FigureIndex}} + \def\FigCaptionWidthLabel{figcapwdth\roman{FigureIndex}} + \ReciteFigure[#1]{\csname\FigureCaptionLabel\endcsname} + {\csname\FigureBoxLabel\endcsname} + {\csname\FigCaptionWidthLabel\endcsname} + \fi +} + +\newcommand\StoreFigure[3][]{ + \addtocounter{FigureIndex}{1} + \setlength\DeadMargin\FigureDeadMargin + \def\FigureBoxLabel{fig\roman{FigureIndex}} + \def\FigureCaptionLabel{figcap\roman{FigureIndex}} + \def\FigCaptionWidthLabel{figcapwdth\roman{FigureIndex}} + \expandafter\SaveCBox\csname\FigureBoxLabel\endcsname{#3} + \expandafter\def\csname\FigureCaptionLabel\endcsname{#2} + \expandafter\newlength\csname\FigCaptionWidthLabel\endcsname + \expandafter\setlength\csname\FigCaptionWidthLabel\endcsname + \CaptionBoxWidth +} + +\newcommand\ReciteFigure[4][h]{ + \begin{figure}[#1] + \begin{\LRFigurePlacement} + \let\@makecaption \new@makecaption + \setlength\abovecaptionskip{\arabic{abovecaptionskipterm}\p@} + \setlength\belowcaptionskip{\arabic{belowcaptionskipterm}\p@} + \set@DataBoxWidth{#3} + \setlength\CaptionBoxWidth{#4} + \set@BoxOffsets + \rule{\@DataBoxOffset}{0in}% + \usebox{#3}% + \rule{\@DataBoxOffset}{0in}% + \par + \rule{\@CaptionBoxOffset}{0em}% + \parbox{\CaptionBoxWidth}{\caption {#2}}% + \rule{\@CaptionBoxOffset}{0em}% + \let\@makecaption \old@makecaption + \setlength\abovecaptionskip \oldabovecaptionskip + \setlength\belowcaptionskip \oldbelowcaptionskip + \end{\LRFigurePlacement} + \end{figure} +} + +\newcommand\clearFigures{ + \clearpage + \clearlistoffigures + \clearpage +%%DO UNTIL ALL HELD FIGURES ARE CLEARED + \whiledo{\arabic{FigureClearedIndex} < \arabic{FigureIndex}}{ + \addtocounter{FigureClearedIndex}{1} +%% \FigureBoxLabel: : figi, figii, figiii, figiv, etc. +%% \FigureCaptionLabel : figcapi, figcapii, figcapiii, figcapiv, etc. +%% \FigCaptionWidthLabel: figcapwdthi, figcapwdthii, figcapwdthiii,etc. + \def\FigureBoxLabel{fig\roman{FigureClearedIndex}} + \def\FigureCaptionLabel{figcap\roman{FigureClearedIndex}} + \def\FigCaptionWidthLabel{figcapwdth\roman{FigureClearedIndex}} + \theClearedFigure{\csname\FigureCaptionLabel\endcsname} + {\csname\FigureBoxLabel\endcsname} + {\csname\FigCaptionWidthLabel\endcsname} + } +} + +%% \theClearedFigure CAN BE RENEWED IF DIFFERENT OUTPUT FORMAT DESIRED +\newcommand\theClearedFigure[4][h]{ +%% CLEAR THIS FIGURE ON A PAGE BY ITSELF, CENTERED VERTICALLY + \vspace*{\fill} + \ReciteFigure[#1]{#2}{#3}{#4} + \vspace*{\fill} + \clearpage +} + +\newcommand\relaxCaptionWidth[1][\@minCaptionBoxWidthDefault]{ + \setlength\@minCaptionBoxWidth{#1} + \ifdim \@minCaptionBoxWidth > \@maxCaptionBoxWidth + \setlength\@maxCaptionBoxWidth\@minCaptionBoxWidth + \fi +} +\relaxCaptionWidth% SET INITIAL \@minCaptionBoxWidth TO DEFAULT VALUE + +\newcommand\limitCaptionWidth[1][\@maxCaptionBoxWidthDefault]{ + \setlength\@maxCaptionBoxWidth{#1} + \ifdim \@maxCaptionBoxWidth < \@minCaptionBoxWidth + \setlength\@minCaptionBoxWidth\@maxCaptionBoxWidth + \fi +} +\limitCaptionWidth% SET INITIAL \@maxCaptionBoxWidth TO DEFAULT VALUE + +\newcommand\constrainCaptionWidth[2][-1in]{ + \ifdim #1 < 0in + \setlength\@minCaptionBoxWidth{#2} + \setlength\@maxCaptionBoxWidth{#2} + \else + \ifdim #1 < #2 + \setlength\@minCaptionBoxWidth{#1} + \setlength\@maxCaptionBoxWidth{#2} + \else + \setlength\@minCaptionBoxWidth{#2} + \setlength\@maxCaptionBoxWidth{#1} + \fi + \fi +} + +\newcommand\SaveCBox[2]{ + \newsavebox{#1} + \sbox{#1}{#2} + \set@BoxWidths{#1} +} + +\newcommand\set@BoxWidths[1]{% of DataBox & CaptionBox (-2\DeadMargin) + \set@DataBoxWidth{#1} + \set@CaptionBoxWidth +} + +\newcommand\set@DataBoxWidth[1]{ + \setlength {\@DataBoxWidth}{\widthof{\usebox{#1}}} +} + +\newcommand\set@CaptionBoxWidth{ + \setlength\CaptionBoxWidth\@DataBoxWidth + \addtolength{\CaptionBoxWidth}{-2\DeadMargin} + \ifdim \CaptionBoxWidth < \@minCaptionBoxWidth + \setlength\CaptionBoxWidth\@minCaptionBoxWidth + \fi + \ifdim \CaptionBoxWidth > \@maxCaptionBoxWidth + \setlength\CaptionBoxWidth\@maxCaptionBoxWidth + \fi +} + +\newcommand\set@BoxOffsets{ + \setlength\@DataBoxSurplus{\@DataBoxWidth} + \addtolength\@DataBoxSurplus{-\CaptionBoxWidth} + \ifdim \@DataBoxSurplus > 0in + \setlength\@CaptionBoxOffset{0.5\@DataBoxSurplus} + \setlength\@DataBoxOffset{0in} + \else + \setlength\@CaptionBoxOffset{0in} + \setlength\@DataBoxOffset{-0.5\@DataBoxSurplus} + \fi +} + +\long\def\offset@caption#1#2{ + \setlength\@captionIDwidth{\widthofpbox{\CaptionFontSize{#1.}}} + \addtolength\@captionIDwidth\captionGap + \setlength\@captionWidth\CaptionBoxWidth + \addtolength\@captionWidth{-\@captionIDwidth} + \CaptionFontSize{#1.}\hfill\parbox[t]{\@captionWidth} + {\CaptionJustification\CaptionFontSize{#2.}}% +} + +\long\def\nooffset@caption#1#2{% + \CaptionJustification\CaptionFontSize #1.\rule{\captionGap}{0in}#2.% +} + +\long\def\shortleft@caption#1#2{% + \raggedright \CaptionFontSize #1.\rule{\captionGap}{0in}#2.% +} + +\long\def\shortcenter@caption#1#2{% + \centering \CaptionFontSize #1.\rule{\captionGap}{0in}#2.% +} + +\long\def\shortright@caption#1#2{% + \raggedleft \CaptionFontSize #1.\rule{\captionGap}{0in}#2.% +} + +\long\def\new@makecaption#1#2{% + \vskip\abovecaptionskip + \sbox\@tempboxa{\CaptionFontSize #1.\rule{\captionGap}{0in}#2.}% + \ifdim \wd\@tempboxa >\hsize + \long@caption{#1}{#2} + \else + \short@caption{#1}{#2} + \fi + \vskip\belowcaptionskip +} + +\newcommand\captionStyle[2]{ + \if o#1 \let\long@caption \offset@caption \fi + \if n#1 \let\long@caption \nooffset@caption \fi + \if l#2 \let\short@caption \shortleft@caption \fi + \if c#2 \let\short@caption \shortcenter@caption \fi + \if r#2 \let\short@caption \shortright@caption \fi +} + +%% SET DEFAULT CAPTION STYLE: CAPTION ID OFFSET FOR LONG CAPTIONS, +%% SHORT CAPTIONS LEFT ALIGNED +\captionStyle{o}{l} + +\newcommand\killtableofcontents{ + \renewcommand\tableofcontents{} +} + +%%LIST OF FIGURES HANDLING: +\newcounter{lofInvocations} \setcounter{lofInvocations}{0} +\newcounter{lofPrints} \setcounter{lofPrints}{0} +\let\oldlistoffigures\listoffigures + +\newcommand\killlistoffigures{ + \def\oldlistoffigures {} + \renewcommand\listoffigures{} +} + +\newcommand\holdlistoffigures{ + \renewcommand\listoffigures{\addtocounter{lofInvocations}{1}} +} + +\newcommand\clearlistoffigures{ + \whiledo{\arabic{lofPrints} < \arabic{lofInvocations}}{ + \addtocounter{lofPrints}{1} + \oldlistoffigures + } +} + +%%LIST OF TABLES HANDLING: +\newcounter{lotInvocations} \setcounter{lotInvocations}{0} +\newcounter{lotPrints} \setcounter{lotPrints}{0} +\let\oldlistoftables\listoftables + +\newcommand\killlistoftables{ + \def\oldlistoftables {} + \renewcommand\listoftables{} +} + +\newcommand\holdlistoftables{ + \renewcommand\listoftables{\addtocounter{lotInvocations}{1}} +} + +\newcommand\clearlistoftables{ + \whiledo{\arabic{lotPrints} < \arabic{lotInvocations}}{ + \addtocounter{lotPrints}{1} + \oldlistoftables + } +} + +%% TO RETAIN BACKWARD COMPATIBILITY WITH THE PREDECESSOR TO boxtable, +%% THE FOLLOWING ASSIGNMENTS ARE MADE. +\let\arltable\bxtable +\let\arlfigure\bxfigure + +\endinput +%% +%% End of file `boxhandler.sty'. diff --git a/Master/texmf-dist/tpm/boxhandler.tpm b/Master/texmf-dist/tpm/boxhandler.tpm new file mode 100644 index 00000000000..c65a9ea876f --- /dev/null +++ b/Master/texmf-dist/tpm/boxhandler.tpm @@ -0,0 +1,29 @@ +<!DOCTYPE rdf:RDF SYSTEM "../../support/tpm.dtd"> +<rdf:RDF xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#" xmlns:TPM="http://texlive.dante.de/"> + <rdf:Description about="http://texlive.dante.de/texlive/Package/boxhandler.zip"> + <TPM:Name>boxhandler</TPM:Name> + <TPM:Type>Package</TPM:Type> + <TPM:Date>2006/04/24 05:54:00</TPM:Date> + <TPM:Version></TPM:Version> + <TPM:Creator>karl</TPM:Creator> + <TPM:Title>The boxhandler package.</TPM:Title> + <TPM:Description></TPM:Description> + <TPM:Author></TPM:Author> + <TPM:Size>304143</TPM:Size> + <TPM:Build/> + <TPM:RunFiles size="18527"> +texmf-dist/tex/latex/boxhandler/boxhandler.sty +texmf-dist/tpm/boxhandler.tpm + </TPM:RunFiles> + <TPM:DocFiles size="213366"> +texmf-dist/doc/latex/boxhandler/README +texmf-dist/doc/latex/boxhandler/boxhandler.pdf + </TPM:DocFiles> + <TPM:SourceFiles size="73316"> +texmf-dist/source/latex/boxhandler/boxhandler.dtx +texmf-dist/source/latex/boxhandler/boxhandler.ins + </TPM:SourceFiles> + <TPM:Provides>Package/boxhandler</TPM:Provides> + </rdf:Description> +</rdf:RDF> + |