5 files changed, 328 insertions, 0 deletions
diff --git a/Master/texmf-dist/doc/latex/delim/README b/Master/texmf-dist/doc/latex/delim/README
new file mode 100644
index 00000000000..d84ade3abb5
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/delim/README
@@ -0,0 +1,8 @@
+delim.sty:
+   Simplifies formatting of delimiters in mathematical expressions, by
+   providing a syntactically cleaner alternative to \left, \middle, \right
+   and their fixed-size counterparts like \bigl etc.
+
+This material is subject to the LaTeX Project Public License. See
+http://www.ctan.org/tex-archive/help/Catalogue/licenses.lppl.html for the
+details of that license.
diff --git a/Master/texmf-dist/doc/latex/delim/delim.pdf b/Master/texmf-dist/doc/latex/delim/delim.pdf
new file mode 100644
index 00000000000..4fde1efb44e
--- /dev/null
+++ b/Master/texmf-dist/doc/latex/delim/delim.pdf
diff --git a/Master/texmf-dist/source/latex/delim/delim.dtx b/Master/texmf-dist/source/latex/delim/delim.dtx
new file mode 100644
index 00000000000..b4ce90aebfe
--- /dev/null
+++ b/Master/texmf-dist/source/latex/delim/delim.dtx
@@ -0,0 +1,224 @@
+% \iffalse meta-comment
+%
+% Copyright 2010 by Stefan Majewsky <majewsky.stefan@ages-skripte.org>
+%
+% This file may be distributed and/or modified under the
+% conditions of the LaTeX Project Public License, either version 1.2
+% of this license or (at your option) any later version.
+% The latest version of this license is in:
+%
+%     http://www.latex-project.org/lppl.txt
+%
+% and version 1.2 or later is part of all distributions of LaTeX
+% version 1999/12/01 or later.
+%
+% \fi
+%
+% \iffalse
+%<package>\NeedsTeXFormat{LaTeX2e}[1999/12/01]
+%<package>\ProvidesPackage{delim}
+%<package>   [2011/09/13 1.0 Typesetting of mathematical delimiters]
+%
+%<*driver>
+\documentclass{ltxdoc}
+ \usepackage[english]{babel}
+ \usepackage[utf8]{inputenc}
+ \usepackage[T1]{fontenc}
+ \usepackage{delim,calc}
+
+ \newenvironment{pexample}
+  {\vspace{1em}\begin{tabular}{@{\hspace{1em}}l}}
+  {\end{tabular}\par}
+ \newenvironment{example}[1]
+  {\vspace{1em}\begin{tabular}{@{\hspace{1em}}p{#1\linewidth}@{\hspace{3em}}l}}
+  {\end{tabular}\vspace{1em}}
+
+ \setlength\parindent{0pt}
+ \EnableCrossrefs
+ \CodelineIndex
+ \RecordChanges
+ \begin{document}
+  \DocInput{delim.dtx}
+ \end{document}
+%</driver>
+%
+% \fi
+%
+% \CheckSum{66}
+%
+% \CharacterTable
+%  {Upper-case    \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z
+%   Lower-case    \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z
+%   Digits        \0\1\2\3\4\5\6\7\8\9
+%   Exclamation   \!     Double quote  \"     Hash (number) \#
+%   Dollar        \$     Percent       \%     Ampersand     \&
+%   Acute accent  \'     Left paren    \(     Right paren   \)
+%   Asterisk      \*     Plus          \+     Comma         \,
+%   Minus         \-     Point         \.     Solidus       \/
+%   Colon         \:     Semicolon     \;     Less than     \<
+%   Equals        \=     Greater than  \>     Question mark \?
+%   Commercial at \@     Left bracket  \[     Backslash     \\
+%   Right bracket \]     Circumflex    \^     Underscore    \_
+%   Grave accent  \`     Left brace    \{     Vertical bar  \|
+%   Right brace   \}     Tilde         \~}
+%
+% \changes{v1.0}{2011/09/13}{Simplified user interface}
+% \changes{v0.2}{2010/05/13}{Much simpler implementation without ifthen package}
+% \changes{v0.1}{2010/05/06}{Initial Version}
+%
+% \GetFileInfo{delim.sty}
+%
+% \DoNotIndex{}
+%
+% \title{The \textsf{delim} package\thanks{This document
+%   corresponds to \textsf{delim}~\fileversion,
+%   dated~\filedate.}}
+% \author{Stefan Majewsky \\ \texttt{majewsky@gmx.net}}
+%
+% \maketitle
+% \begin{abstract}
+%  This package simplifies typesetting of variable-size delimiters (like
+%  parentheses) in mathematical expressions.
+% \end{abstract}
+%
+% {\LaTeX} provides some commands for the correct typesetting of delimiters in
+% mathematical expressions. Consider the following equation:
+%
+% \begin{example}{0.15}
+%  $\displaystyle(a + \frac bc) \cdot d$ &
+%               |(a + \frac bc) \cdot d|
+% \end{example}
+%
+% By default, the parentheses will not scale up correctly. The |\left| and |\right| commands fix this problem:
+%
+% \begin{example}{0.15}
+%  $\displaystyle\left(a + \frac bc\right) \cdot d$ &
+%               |\left(a + \frac bc\right) \cdot d|
+% \end{example}
+%
+% But because it's cumbersome to write |\left| and |\right| every time, we
+% define and use a macro:
+%
+% \delimdef\p#1{\dleft(#1\dright)}
+% \begin{pexample}
+%  |\delimdef\p#1{\dleft(#1\dright)}|
+% \end{pexample}
+% \begin{example}{0.15}
+%  $\displaystyle\p{a + \frac bc} \cdot d$ &
+%               |\p{a + \frac bc} \cdot d|
+% \end{example}
+%
+% \DescribeMacro{\delimdef}
+% \DescribeMacro{\dleft} \DescribeMacro{\dmiddle} \DescribeMacro{\dright}
+% We did not use |\def|, but |\delimdef| which is defined by this package.
+% Also, we substituted |\dleft| and |\dright| for |\left| and |\right|. There's
+% also |\dmiddle|, as in this example:
+%
+% \delimdef\braket#1#2{\dleft\langle#1\dmiddle\vert#2\dright\rangle}
+% \begin{pexample}
+%  |\delimdef\braket#1#2{\dleft\langle#1\dmiddle\vert#2\dright\rangle}|
+% \end{pexample}
+% \begin{example}{0.15}
+%  $\displaystyle\braket{\psi_n(t)}\psi$ &
+%               |\braket{\psi_n(t)}\psi|
+% \end{example}
+%
+% But why wouldn't we want to use |\def|? Because |\left|, |\middle| and
+% |\right| are not always what you want. For example, if you want the delimiters
+% to be a bit bigger in the last example, you would substitute |\bigl|, |\bigm|
+% and |\bigr| for |\left|, |\middle| and |\right|. This is not possible with
+% a simple |\def| macro. Macros defined by |\delimdef| can substitute |\dleft|
+% etc. for any common set of delimiter commands, by using a \emph{size prefix}:
+%
+% \begin{example}{0.15}
+%  $\displaystyle\mbig\braket{\psi_n(t)}\psi$ &
+%               |\mbig\braket{\psi_n(t)}\psi|
+% \end{example}
+%
+% Let's look at another example:
+%
+% \begin{example}{0.15}
+%  $\displaystyle\p{\underbrace{a_1 + a_2}_{=b}}$ &
+%               |\p{\underbrace{a_1 + a_2}_{=b}}|
+% \end{example}
+%
+% We want to use our |\p| macro, but the parentheses should be reset to their
+% normal size. The size prefix |\mnorm| does just that:
+%
+% \begin{example}{0.15}
+%  $\displaystyle\mnorm\p{\underbrace{a_1 + a_2}_{=b}}$ &
+%               |\mnorm\p{\underbrace{a_1 + a_2}_{=b}}|
+% \end{example}
+%
+% \DescribeMacro{\mnorm} \DescribeMacro{\mbig} \DescribeMacro{\mBig}
+% \DescribeMacro{\mbigg} \DescribeMacro{\mBigg} \DescribeMacro{\mauto}
+% The following size prefixes are defined by this package:
+%
+% \begin{example}{0.15}
+%  $\displaystyle\mnorm\p{\frac ab}$ & |\mnorm| (normal character size) \\[1em]
+%  $\displaystyle\mbig\p{\frac ab}$ & |\mbig = \bigl| etc. \\[1em]
+%  $\displaystyle\mBig\p{\frac ab}$ & |\mBig = \Bigl| etc. \\[1em]
+%  $\displaystyle\mbigg\p{\frac ab}$ & |\mbigg = \biggl| etc. \\[1em]
+%  $\displaystyle\mBigg\p{\frac ab}$ & |\mBigg = \Biggl| etc. \\[1.5em]
+%  $\displaystyle\mauto\p{\frac ab}$ & |\mauto = \left| etc. (default behavior)
+% \end{example}
+%
+% \DescribeMacro{\delim@load}
+% If no prefix is given, |\mauto| is used. New size prefixes can be defined
+% using the |\delim@load| macro; refer to the implementation of the existing
+% prefixes for details.
+%
+% \clearpage\section*{Implementation}
+%
+% \begin{macro}{\delim@load}
+% Size prefixes use this macro to enter a new delimiter level and define the
+% delimiter commands for that level. |\delim@loaded| signals that delimiter
+% commands have been provided for this level. Its exact content is irrelevant,
+% only the fact that it is defined is needed (see below).
+%    \begin{macrocode}
+\def\delim@load#1#2#3{%
+ \begingroup%
+ \def\dleft{#1}%
+ \def\dmiddle{#2}%
+ \def\dright{#3}%
+ \def\delim@loaded{}%
+}%
+%    \end{macrocode}
+% \end{macro}
+% \begin{macro}{\mauto}\begin{macro}{\mnorm}\begin{macro}{\mbig}\begin{macro}{\mBig}\begin{macro}{\mbigg}\begin{macro}{\mBigg}
+% The size prefixes are defined using |\delim@load|.
+%    \begin{macrocode}
+\newcommand\mauto{\delim@load\left\middle\right}%
+\newcommand\mnorm{\delim@load\relax\relax\relax}%
+\newcommand\mbig{\delim@load\bigl\bigm\bigr}%
+\newcommand\mBig{\delim@load\Bigl\Bigm\Bigr}%
+\newcommand\mbigg{\delim@load\biggl\biggm\biggr}%
+\newcommand\mBigg{\delim@load\Biggl\Biggm\Biggr}%
+%    \end{macrocode}
+% \end{macro}\end{macro}\end{macro}\end{macro}\end{macro}\end{macro}
+% \begin{macro}{\delimdef}
+% This defines a new delimiter macro. The macro substitution text is
+% extended by a grouping level, with additional logic being collected in
+% |\delim@begingroup|.
+%    \begin{macrocode}
+\def\delimdef#1#{\delim@def{#1}}%
+\def\delim@def#1#2{\def#1{\delim@begingroup#2\endgroup}}%
+%    \end{macrocode}
+% Special thanks go to Martin Scharrer for pointing out to me the capabilities
+% of |\def| used in this implementation (see
+% |http://tex.stackexchange.com/questions/28207/|).
+% \end{macro}
+% \begin{macro}{\delim@begingroup}
+% |\delim@begingroup| ensures that delimiters are loaded (default is |\mauto|)
+% and the |\delim@loaded| flag is cleared (for cascaded delimiter macros to work
+% properly). The |\begingroup| is contained in the delimiter macro, see the
+% definition of |\delim@load|.
+%    \begin{macrocode}
+\def\delim@begingroup{%
+ \ifx\delim@loaded\undefined\mauto\fi%
+ \let\delim@loaded\undefined%
+}%
+%    \end{macrocode}
+% \end{macro}
+%
+% \Finale
diff --git a/Master/texmf-dist/source/latex/delim/delim.ins b/Master/texmf-dist/source/latex/delim/delim.ins
new file mode 100644
index 00000000000..2f2e9e234b8
--- /dev/null
+++ b/Master/texmf-dist/source/latex/delim/delim.ins
@@ -0,0 +1,50 @@
+%%
+%% Copyright 2011 Stefan Majewsky <majewsky@gmx.net>
+%%
+%% This file may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either
+%% version 1.2 of this license or (at your option) any later
+%% version. The latest version of this license is in:
+%%
+%%    http://www.latex-project.org/lppl.txt
+%%
+%% and version 1.2 or later is part of all distributions of
+%% LaTeX version 1999/12/01 or later.
+%%
+\input docstrip.tex
+\keepsilent
+\usedir{tex/latex/delim}
+
+\preamble
+
+This is a generated file.
+
+Copyright 2011 Stefan Majewsky <majewsky@gmx.net>
+This file may be distributed and/or modified under the
+conditions of the LaTeX Project Public License, either
+version 1.2 of this license or (at your option) any later
+version. The latest version of this license is in:
+
+    http://www.latex-project.org/lppl.txt
+
+and version 1.2 or later is part of all distributions of
+LaTeX version 1999/12/01 or later.
+
+\endpreamble
+
+\generate{\file{delim.sty}{\from{delim.dtx}{package}}}
+
+\Msg{*********************************************************}
+\Msg{*}
+\Msg{* To finish the installation you have to move the}
+\Msg{* following file into a directory searched by TeX:}
+\Msg{*}
+\Msg{* \space\space delim.sty}
+\Msg{*}
+\Msg{* To produce the documentation run the file delim.dtx}
+\Msg{* through LaTeX.}
+\Msg{*}
+\Msg{* Happy TeXing!}
+\Msg{*********************************************************}
+
+\endbatchfile
diff --git a/Master/texmf-dist/tex/latex/delim/delim.sty b/Master/texmf-dist/tex/latex/delim/delim.sty
new file mode 100644
index 00000000000..b72272c5a55
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/delim/delim.sty
@@ -0,0 +1,46 @@
+%%
+%% This is file `delim.sty',
+%% generated with the docstrip utility.
+%%
+%% The original source files were:
+%%
+%% delim.dtx  (with options: `package')
+%% 
+%% This is a generated file.
+%% 
+%% Copyright 2011 Stefan Majewsky <majewsky@gmx.net>
+%% This file may be distributed and/or modified under the
+%% conditions of the LaTeX Project Public License, either
+%% version 1.2 of this license or (at your option) any later
+%% version. The latest version of this license is in:
+%% 
+%%     http://www.latex-project.org/lppl.txt
+%% 
+%% and version 1.2 or later is part of all distributions of
+%% LaTeX version 1999/12/01 or later.
+%% 
+\NeedsTeXFormat{LaTeX2e}[1999/12/01]
+\ProvidesPackage{delim}
+   [2011/09/13 1.0 Typesetting of mathematical delimiters]
+\def\delim@load#1#2#3{%
+ \begingroup%
+ \def\dleft{#1}%
+ \def\dmiddle{#2}%
+ \def\dright{#3}%
+ \def\delim@loaded{}%
+}%
+\newcommand\mauto{\delim@load\left\middle\right}%
+\newcommand\mnorm{\delim@load\relax\relax\relax}%
+\newcommand\mbig{\delim@load\bigl\bigm\bigr}%
+\newcommand\mBig{\delim@load\Bigl\Bigm\Bigr}%
+\newcommand\mbigg{\delim@load\biggl\biggm\biggr}%
+\newcommand\mBigg{\delim@load\Biggl\Biggm\Biggr}%
+\def\delimdef#1#{\delim@def{#1}}%
+\def\delim@def#1#2{\def#1{\delim@begingroup#2\endgroup}}%
+\def\delim@begingroup{%
+ \ifx\delim@loaded\undefined\mauto\fi%
+ \let\delim@loaded\undefined%
+}%
+\endinput
+%%
+%% End of file `delim.sty'.