summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/tex/texinfo
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/tex/texinfo')
-rw-r--r--Master/texmf-dist/tex/texinfo/texinfo.tex216
1 files changed, 108 insertions, 108 deletions
diff --git a/Master/texmf-dist/tex/texinfo/texinfo.tex b/Master/texmf-dist/tex/texinfo/texinfo.tex
index e540acd9870..d2e895f3628 100644
--- a/Master/texmf-dist/tex/texinfo/texinfo.tex
+++ b/Master/texmf-dist/tex/texinfo/texinfo.tex
@@ -1,5 +1,5 @@
% texinfo.tex -- TeX macros to handle Texinfo files.
-%
+%
% Load plain if necessary, i.e., if running under initex.
\expandafter\ifx\csname fmtname\endcsname\relax\input plain\fi
%
@@ -218,7 +218,7 @@
% @errormsg{MSG}. Do the index-like expansions on MSG, but if things
% aren't perfect, it's not the end of the world, being an error message,
% after all.
-%
+%
\def\errormsg{\begingroup \indexnofonts \doerrormsg}
\def\doerrormsg#1{\errmessage{#1}}
@@ -323,9 +323,9 @@
% the output routine. The saved contents are valid until we actually
% \shipout a page.
%
-% (We used to run a short output routine to actually set \topmark and
-% \firstmark to the right values, but if this was called with an empty page
-% containing whatsits for writing index entries, the whatsits would be thrown
+% (We used to run a short output routine to actually set \topmark and
+% \firstmark to the right values, but if this was called with an empty page
+% containing whatsits for writing index entries, the whatsits would be thrown
% away and the index auxiliary file would remain empty.)
%
\newtoks\savedtopmark
@@ -365,7 +365,7 @@
\let\thischapterheading\thischapter
\else
% \thischapterheading is the same as \thischapter except it is blank
- % for the first page of a chapter. This is to prevent the chapter name
+ % for the first page of a chapter. This is to prevent the chapter name
% being shown twice.
\def\thischapterheading{}%
\fi
@@ -448,7 +448,7 @@
}%
}
-% First remove any @comment, then any @c comment. Pass the result on to
+% First remove any @comment, then any @c comment. Pass the result on to
% \argcheckspaces.
\def\argremovecomment#1\comment#2\ArgTerm{\argremovec #1\c\ArgTerm}
\def\argremovec#1\c#2\ArgTerm{\argcheckspaces#1\^^M\ArgTerm}
@@ -1137,7 +1137,7 @@ where each line of input produces a line of output.}
% for display in the outlines, and in other places. Thus, we have to
% double any backslashes. Otherwise, a name like "\node" will be
% interpreted as a newline (\n), followed by o, d, e. Not good.
-%
+%
% See http://www.ntg.nl/pipermail/ntg-pdftex/2004-July/000654.html and
% related messages. The final outcome is that it is up to the TeX user
% to double the backslashes and otherwise make the string valid, so
@@ -1442,7 +1442,7 @@ output) for that.)}
% their "best" equivalent, based on the @documentencoding. Too
% much work for too little return. Just use the ASCII equivalents
% we use for the index sort strings.
- %
+ %
\indexnofonts
\setupdatafile
% We can have normal brace characters in the PDF outlines, unlike
@@ -2726,7 +2726,7 @@ end
}
% Commands to set the quote options.
-%
+%
\parseargdef\codequoteundirected{%
\def\temp{#1}%
\ifx\temp\onword
@@ -2767,7 +2767,7 @@ end
% If we are in a monospaced environment, however, 1) always use \ttsl,
% and 2) do not add an italic correction.
\def\dosmartslant#1#2{%
- \ifusingtt
+ \ifusingtt
{{\ttsl #2}\let\next=\relax}%
{\def\next{{#1#2}\futurelet\next\smartitaliccorrection}}%
\next
@@ -2914,14 +2914,14 @@ end
\gdef\codedash{\futurelet\next\codedashfinish}
\gdef\codedashfinish{%
\normaldash % always output the dash character itself.
- %
+ %
% Now, output a discretionary to allow a line break, unless
% (a) the next character is a -, or
% (b) the preceding character is a -.
% E.g., given --posix, we do not want to allow a break after either -.
% Given --foo-bar, we do want to allow a break between the - and the b.
\ifx\next\codedash \else
- \ifx\codedashprev\codedash
+ \ifx\codedashprev\codedash
\else \discretionary{}{}{}\fi
\fi
% we need the space after the = for the case when \next itself is a
@@ -3003,7 +3003,7 @@ end
% For pdfTeX and LuaTeX
\ifurefurlonlylink
% PDF plus option to not display url, show just arg
- \unhbox0
+ \unhbox0
\else
% PDF, normally display both arg and url for consistency,
% visibility, if the pdf is eventually used to print, etc.
@@ -3016,7 +3016,7 @@ end
% For XeTeX
\ifurefurlonlylink
% PDF plus option to not display url, show just arg
- \unhbox0
+ \unhbox0
\else
% PDF, normally display both arg and url for consistency,
% visibility, if the pdf is eventually used to print, etc.
@@ -3074,10 +3074,10 @@ end
}
}
-% By default we'll break after the special characters, but some people like to
-% break before the special chars, so allow that. Also allow no breaking at
+% By default we'll break after the special characters, but some people like to
+% break before the special chars, so allow that. Also allow no breaking at
% all, for manual control.
-%
+%
\parseargdef\urefbreakstyle{%
\def\txiarg{#1}%
\ifx\txiarg\wordnone
@@ -3095,7 +3095,7 @@ end
\def\wordbefore{before}
\def\wordnone{none}
-% Allow a ragged right output to aid breaking long URL's. Putting stretch in
+% Allow a ragged right output to aid breaking long URL's. Putting stretch in
% between characters of the URL doesn't look good.
\def\urefallowbreak{%
\hskip 0pt plus 4 em\relax
@@ -3299,7 +3299,7 @@ end
% @inlinefmt{FMTNAME,PROCESSED-TEXT} and @inlineraw{FMTNAME,RAW-TEXT}.
% Ignore unless FMTNAME == tex; then it is like @iftex and @tex,
% except specified as a normal braced arg, so no newlines to worry about.
-%
+%
\def\outfmtnametex{tex}
%
\long\def\inlinefmt#1{\doinlinefmt #1,\finish}
@@ -3307,7 +3307,7 @@ end
\def\inlinefmtname{#1}%
\ifx\inlinefmtname\outfmtnametex \ignorespaces #2\fi
}
-%
+%
% @inlinefmtifelse{FMTNAME,THEN-TEXT,ELSE-TEXT} expands THEN-TEXT if
% FMTNAME is tex, else ELSE-TEXT.
\long\def\inlinefmtifelse#1{\doinlinefmtifelse #1,,,\finish}
@@ -3323,7 +3323,7 @@ end
% *right* brace they would have to use a command anyway, so they may as
% well use a command to get a left brace too. We could re-use the
% delimiter character idea from \verb, but it seems like overkill.
-%
+%
\long\def\inlineraw{\tex \doinlineraw}
\long\def\doinlineraw#1{\doinlinerawtwo #1,\finish}
\def\doinlinerawtwo#1,#2,\finish{%
@@ -3600,7 +3600,7 @@ end
% for non-CM glyphs. That is ec* for regular text and tc* for the text
% companion symbols (LaTeX TS1 encoding). Both are part of the ec
% package and follow the same conventions.
-%
+%
\def\ecfont{\etcfont{e}}
\def\tcfont{\etcfont{t}}
%
@@ -3672,7 +3672,7 @@ end
after the title page.}}%
\def\setshortcontentsaftertitlepage{%
\errmessage{@setshortcontentsaftertitlepage has been removed as a Texinfo
- command; move your @shortcontents and @contents commands if you
+ command; move your @shortcontents and @contents commands if you
want the contents after the title page.}}%
\parseargdef\shorttitlepage{%
@@ -3727,7 +3727,7 @@ end
% don't worry much about spacing, ragged right. This should be used
% inside a \vbox, and fonts need to be set appropriately first. \par should
% be specified before the end of the \vbox, since a vbox is a group.
-%
+%
\def\raggedtitlesettings{%
\rm
\hyphenpenalty=10000
@@ -4350,7 +4350,7 @@ end
}
% multitable-only commands.
-%
+%
% @headitem starts a heading row, which we typeset in bold. Assignments
% have to be global since we are inside the implicit group of an
% alignment entry. \everycr below resets \everytab so we don't have to
@@ -4669,7 +4669,7 @@ end
% Like \expandablevalue, but completely expandable (the \message in the
% definition above operates at the execution level of TeX). Used when
% writing to auxiliary files, due to the expansion that \write does.
-% If flag is undefined, pass through an unexpanded @value command: maybe it
+% If flag is undefined, pass through an unexpanded @value command: maybe it
% will be set by the time it is read back in.
%
% NB flag names containing - or _ may not work here.
@@ -4693,7 +4693,7 @@ end
% @ifset VAR ... @end ifset reads the `...' iff VAR has been defined
% with @set.
-%
+%
% To get the special treatment we need for `@end ifset,' we call
% \makecond and then redefine.
%
@@ -4726,7 +4726,7 @@ end
% without the @) is in fact defined. We can only feasibly check at the
% TeX level, so something like `mathcode' is going to considered
% defined even though it is not a Texinfo command.
-%
+%
\makecond{ifcommanddefined}
\def\ifcommanddefined{\parsearg{\doifcmddefined{\let\next=\ifcmddefinedfail}}}
%
@@ -4834,8 +4834,8 @@ end
\def\docodeindex#1{\edef\indexname{#1}\parsearg\docodeindexxxx}
\def\docodeindexxxx #1{\doind{\indexname}{\code{#1}}}
-
-% Used for the aux, toc and index files to prevent expansion of Texinfo
+
+% Used for the aux, toc and index files to prevent expansion of Texinfo
% commands.
%
\def\atdummies{%
@@ -5180,7 +5180,7 @@ end
}
\def\defglyph#1#2{\def#1##1{#2}} % see above
-
+
% #1 is the index name, #2 is the entry text.
@@ -5207,7 +5207,7 @@ end
\ifx\suffix\indexisfl\def\suffix{f1}\fi
% Open the file
\immediate\openout\csname#1indfile\endcsname \jobname.\suffix
- % Using \immediate above here prevents an object entering into the current
+ % Using \immediate above here prevents an object entering into the current
% box, which could confound checks such as those in \safewhatsit for
% preceding skips.
\typeout{Writing index file \jobname.\suffix}%
@@ -5259,7 +5259,7 @@ end
\ifx\segment\isfinish
\else
%
- % Fully expand the segment, throwing away any @sortas directives, and
+ % Fully expand the segment, throwing away any @sortas directives, and
% trim spaces.
\edef\trimmed{\segment}%
\edef\trimmed{\expandafter\eatspaces\expandafter{\trimmed}}%
@@ -5317,12 +5317,12 @@ end
% the current value of \escapechar.
\def\escapeisbackslash{\escapechar=`\\}
-% Use \ in index files by default. texi2dvi didn't support @ as the escape
-% character (as it checked for "\entry" in the files, and not "@entry"). When
-% the new version of texi2dvi has had a chance to become more prevalent, then
-% the escape character can change back to @ again. This should be an easy
-% change to make now because both @ and \ are only used as escape characters in
-% index files, never standing for themselves.
+% Use \ in index files by default. texi2dvi didn't support @ as the escape
+% character (as it checked for "\entry" in the files, and not "@entry"). When
+% the new version of texi2dvi has had a chance to become more prevalent, then
+% the escape character can change back to @ again. This should be an easy
+% change to make now because both @ and \ are only used as escape characters in
+% index files, never standing for themselves.
%
\set txiindexescapeisbackslash
@@ -5342,7 +5342,7 @@ end
\def\}{\rbracechar{}}%
\uccode`\~=`\\ \uppercase{\def~{\backslashchar{}}}%
%
- % Split the entry into primary entry and any subentries, and get the index
+ % Split the entry into primary entry and any subentries, and get the index
% sort key.
\splitindexentry\indextext
%
@@ -5523,18 +5523,18 @@ end
\uccode`\~=`\\ \uppercase{\if\noexpand~}\noexpand#1
\expandafter\ifx\csname SETtxiskipindexfileswithbackslash\endcsname\relax
\errmessage{%
-ERROR: A sorted index file in an obsolete format was skipped.
+ERROR: A sorted index file in an obsolete format was skipped.
To fix this problem, please upgrade your version of 'texi2dvi'
or 'texi2pdf' to that at <https://ftp.gnu.org/gnu/texinfo>.
-If you are using an old version of 'texindex' (part of the Texinfo
+If you are using an old version of 'texindex' (part of the Texinfo
distribution), you may also need to upgrade to a newer version (at least 6.0).
You may be able to typeset the index if you run
'texindex \jobname.\indexname' yourself.
-You could also try setting the 'txiindexescapeisbackslash' flag by
+You could also try setting the 'txiindexescapeisbackslash' flag by
running a command like
-'texi2dvi -t "@set txiindexescapeisbackslash" \jobname.texi'. If you do
+'texi2dvi -t "@set txiindexescapeisbackslash" \jobname.texi'. If you do
this, Texinfo will try to use index files in the old format.
-If you continue to have problems, deleting the index files and starting again
+If you continue to have problems, deleting the index files and starting again
might help (with 'rm \jobname.?? \jobname.??s')%
}%
\else
@@ -5603,7 +5603,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% bottom of a column to reduce an increase in inter-line spacing.
\nobreak
\vskip 0pt plus 5\baselineskip
- \penalty -300
+ \penalty -300
\vskip 0pt plus -5\baselineskip
%
% Typeset the initial. Making this add up to a whole number of
@@ -5719,7 +5719,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\advance\dimen@ii by 1\dimen@i
\ifdim\wd\boxA > \dimen@ii % If the entry doesn't fit in one line
\ifdim\dimen@ > 0.8\dimen@ii % due to long index text
- % Try to split the text roughly evenly. \dimen@ will be the length of
+ % Try to split the text roughly evenly. \dimen@ will be the length of
% the first line.
\dimen@ = 0.7\dimen@
\dimen@ii = \hsize
@@ -5927,7 +5927,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\newbox\balancedcolumns
\setbox\balancedcolumns=\vbox{shouldnt see this}%
%
-% Only called for the last of the double column material. \doublecolumnout
+% Only called for the last of the double column material. \doublecolumnout
% does the others.
\def\balancecolumns{%
\setbox0 = \vbox{\unvbox\PAGE}% like \box255 but more efficient, see p.120.
@@ -5955,7 +5955,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
}%
% Now the left column is in box 1, and the right column in box 3.
%
- % Check whether the left column has come out higher than the page itself.
+ % Check whether the left column has come out higher than the page itself.
% (Note that we have doubled \vsize for the double columns, so
% the actual height of the page is 0.5\vsize).
\ifdim2\ht1>\vsize
@@ -6252,7 +6252,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\let\top\unnumbered
% Sections.
-%
+%
\outer\parseargdef\numberedsec{\numhead1{#1}} % normally calls seczzz
\def\seczzz#1{%
\global\subsecno=0 \global\subsubsecno=0 \global\advance\secno by 1
@@ -6275,7 +6275,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
}
% Subsections.
-%
+%
% normally calls numberedsubseczzz:
\outer\parseargdef\numberedsubsec{\numhead2{#1}}
\def\numberedsubseczzz#1{%
@@ -6300,7 +6300,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
}
% Subsubsections.
-%
+%
% normally numberedsubsubseczzz:
\outer\parseargdef\numberedsubsubsec{\numhead3{#1}}
\def\numberedsubsubseczzz#1{%
@@ -7358,7 +7358,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% @indentedblock is like @quotation, but indents only on the left and
% has no optional argument.
-%
+%
\makedispenvdef{indentedblock}{\indentedblockstart}
%
\def\indentedblockstart{%
@@ -7658,7 +7658,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% @deftypefnnewline on|off says whether the return type of typed functions
% are printed on their own line. This affects @deftypefn, @deftypefun,
% @deftypeop, and @deftypemethod.
-%
+%
\parseargdef\deftypefnnewline{%
\def\temp{#1}%
\ifx\temp\onword
@@ -7677,8 +7677,8 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% \dosubind {index}{topic}{subtopic}
%
% If SUBTOPIC is present, precede it with a space, and call \doind.
-% (At some time during the 20th century, this made a two-level entry in an
-% index such as the operation index. Nobody seemed to notice the change in
+% (At some time during the 20th century, this made a two-level entry in an
+% index such as the operation index. Nobody seemed to notice the change in
% behaviour though.)
\def\dosubind#1#2#3{%
\def\thirdarg{#3}%
@@ -7853,7 +7853,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\tclose{\temp}% typeset the return type
\ifrettypeownline
% put return type on its own line; prohibit line break following:
- \hfil\vadjust{\nobreak}\break
+ \hfil\vadjust{\nobreak}\break
\else
\space % type on same line, so just followed by a space
\fi
@@ -8000,7 +8000,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\scantokens{#1@comment}%
%
% The \comment is to remove the \newlinechar added by \scantokens, and
- % can be noticed by \parsearg. Note \c isn't used because this means cedilla
+ % can be noticed by \parsearg. Note \c isn't used because this means cedilla
% in math mode.
}
@@ -8201,7 +8201,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% list to some hook where the argument is to be expanded. If there are
% less than 10 arguments that hook is to be replaced by ##N where N
% is the position in that list, that is to say the macro arguments are to be
-% defined `a la TeX in the macro body.
+% defined `a la TeX in the macro body.
%
% That gets used by \mbodybackslash (above).
%
@@ -8232,8 +8232,8 @@ might help (with 'rm \jobname.?? \jobname.??s')%
%
% Read recursive and nonrecursive macro bodies. (They're different since
% rec and nonrec macros end differently.)
-%
-% We are in \macrobodyctxt, and the \xdef causes backslashshes in the macro
+%
+% We are in \macrobodyctxt, and the \xdef causes backslashshes in the macro
% body to be transformed.
% Set \macrobody to the body of the macro, and call \defmacro.
%
@@ -8267,7 +8267,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% twice the \macarg.BLAH macros does not cost too much processing power.
\def\parsemmanyargdef@@#1,{%
\if#1;\let\next=\relax
- \else
+ \else
\let\next=\parsemmanyargdef@@
\edef\tempb{\eatspaces{#1}}%
\expandafter\def\expandafter\tempa
@@ -8352,7 +8352,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% Replace arguments by their values in the macro body, and place the result
% in macro \@tempa.
-%
+%
\def\macvalstoargs@{%
% To do this we use the property that token registers that are \the'ed
% within an \edef expand only once. So we are going to place all argument
@@ -8376,9 +8376,9 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\expandafter\def\expandafter\@tempa\expandafter{\@tempc}%
}
-% Define the named-macro outside of this group and then close this group.
-%
-\def\macargexpandinbody@{%
+% Define the named-macro outside of this group and then close this group.
+%
+\def\macargexpandinbody@{%
\expandafter
\endgroup
\macargdeflist@
@@ -8416,7 +8416,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
}
% Trailing missing arguments are set to empty.
-%
+%
\def\setemptyargvalues@{%
\ifx\paramlist\nilm@
\let\next\macargexpandinbody@
@@ -8493,7 +8493,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\else % at most 9
\ifnum\paramno<10\relax
% @MACNAME sets the context for reading the macro argument
- % @MACNAME@@ gets the argument, processes backslashes and appends a
+ % @MACNAME@@ gets the argument, processes backslashes and appends a
% comma.
% @MACNAME@@@ removes braces surrounding the argument list.
% @MACNAME@@@@ scans the macro body with arguments substituted.
@@ -8537,11 +8537,11 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% Call #1 with a list of tokens #2, with any doubled backslashes in #2
% compressed to one.
%
-% This implementation works by expansion, and not execution (so we cannot use
-% \def or similar). This reduces the risk of this failing in contexts where
-% complete expansion is done with no execution (for example, in writing out to
+% This implementation works by expansion, and not execution (so we cannot use
+% \def or similar). This reduces the risk of this failing in contexts where
+% complete expansion is done with no execution (for example, in writing out to
% an auxiliary file for an index entry).
-%
+%
% State is kept in the input stream: the argument passed to
% @look_ahead, @gobble_and_check_finish and @add_segment is
%
@@ -8563,11 +8563,11 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% #3 - NEXT_TOKEN
% #4 used to look ahead
%
-% If the next token is not a backslash, process the rest of the argument;
+% If the next token is not a backslash, process the rest of the argument;
% otherwise, remove the next token.
@gdef@look_ahead#1!#2#3#4{%
@ifx#4\%
- @expandafter@gobble_and_check_finish
+ @expandafter@gobble_and_check_finish
@else
@expandafter@add_segment
@fi#1!{#2}#4#4%
@@ -8591,9 +8591,9 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% #3 - NEXT_TOKEN
% #4 is input stream until next backslash
%
-% Input stream is either at the start of the argument, or just after a
-% backslash sequence, either a lone backslash, or a doubled backslash.
-% NEXT_TOKEN contains the first token in the input stream: if it is \finish,
+% Input stream is either at the start of the argument, or just after a
+% backslash sequence, either a lone backslash, or a doubled backslash.
+% NEXT_TOKEN contains the first token in the input stream: if it is \finish,
% finish; otherwise, append to ARG_RESULT the segment of the argument up until
% the next backslash. PENDING_BACKSLASH contains a backslash to represent
% a backslash just before the start of the input stream that has not been
@@ -8605,13 +8605,13 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% append the pending backslash to the result, followed by the next segment
@expandafter@is_fi@look_ahead#1#2#4!{\}@fi
% this @fi is discarded by @look_ahead.
- % we can't get rid of it with \expandafter because we don't know how
+ % we can't get rid of it with \expandafter because we don't know how
% long #4 is.
}
% #1 - THE_MACRO
% #2 - ARG_RESULT
-% #3 discards the res of the conditional in @add_segment, and @is_fi ends the
+% #3 discards the res of the conditional in @add_segment, and @is_fi ends the
% conditional.
@gdef@call_the_macro#1#2!#3@fi{@is_fi #1{#2}}
@@ -8623,7 +8623,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% for reading the argument (slightly different in the two cases). Then,
% to read the argument, in the whole-line case, it then calls the regular
% \parsearg MAC; in the lbrace case, it calls \passargtomacro MAC.
-%
+%
\def\braceorline#1{\let\macnamexxx=#1\futurelet\nchar\braceorlinexxx}
\def\braceorlinexxx{%
\ifx\nchar\bgroup
@@ -8677,7 +8677,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% Used so that the @top node doesn't have to be wrapped in an @ifnottex
% conditional.
-% \doignore goes to more effort to skip nested conditionals but we don't need
+% \doignore goes to more effort to skip nested conditionals but we don't need
% that here.
\def\omittopnode{%
\ifx\lastnode\wordTop
@@ -8685,7 +8685,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
}
\def\wordTop{Top}
-% Until the next @node or @bye command, divert output to a box that is not
+% Until the next @node or @bye command, divert output to a box that is not
% output.
\def\ignorenode{\setbox\dummybox\vbox\bgroup\def\node{\egroup\node}%
\ignorenodebye
@@ -8752,7 +8752,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
% automatically in xrefs, if the third arg is not explicitly specified.
% This was provided as a "secret" @set xref-automatic-section-title
% variable, now it's official.
-%
+%
\parseargdef\xrefautomaticsectiontitle{%
\def\temp{#1}%
\ifx\temp\onword
@@ -8768,7 +8768,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\fi\fi
}
-%
+%
% @xref, @pxref, and @ref generate cross-references. For \xrefX, #1 is
% the node name, #2 the name of the Info cross-reference, #3 the printed
% node name, #4 the name of the Info file, #5 the name of the printed
@@ -8921,24 +8921,24 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\fi
\else
% node/anchor (non-float) references.
- %
+ %
% If we use \unhbox to print the node names, TeX does not insert
% empty discretionaries after hyphens, which means that it will not
% find a line break at a hyphen in a node names. Since some manuals
% are best written with fairly long node names, containing hyphens,
% this is a loss. Therefore, we give the text of the node name
% again, so it is as if TeX is seeing it for the first time.
- %
+ %
\ifdim \wd\printedmanualbox > 0pt
% Cross-manual reference with a printed manual name.
- %
+ %
\crossmanualxref{\cite{\printedmanual\unskip}}%
%
\else\ifdim \wd\infofilenamebox > 0pt
% Cross-manual reference with only an info filename (arg 4), no
% printed manual name (arg 5). This is essentially the same as
% the case above; we output the filename, since we have nothing else.
- %
+ %
\crossmanualxref{\code{\infofilename\unskip}}%
%
\else
@@ -8978,20 +8978,20 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\endgroup}
% Output a cross-manual xref to #1. Used just above (twice).
-%
+%
% Only include the text "Section ``foo'' in" if the foo is neither
% missing or Top. Thus, @xref{,,,foo,The Foo Manual} outputs simply
% "see The Foo Manual", the idea being to refer to the whole manual.
-%
+%
% But, this being TeX, we can't easily compare our node name against the
% string "Top" while ignoring the possible spaces before and after in
% the input. By adding the arbitrary 7sp below, we make it much less
% likely that a real node name would have the same width as "Top" (e.g.,
% in a monospaced font). Hopefully it will never happen in practice.
-%
+%
% For the same basic reason, we retypeset the "Top" at every
% reference, since the current font is indeterminate.
-%
+%
\def\crossmanualxref#1{%
\setbox\toprefbox = \hbox{Top\kern7sp}%
\setbox2 = \hbox{\ignorespaces \printedrefname \unskip \kern7sp}%
@@ -9038,7 +9038,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\fi\fi\fi
}
-% \refx{NAME}{SUFFIX} - reference a cross-reference string named NAME. SUFFIX
+% \refx{NAME}{SUFFIX} - reference a cross-reference string named NAME. SUFFIX
% is output afterwards if non-empty.
\def\refx#1#2{%
\requireauxfile
@@ -9070,9 +9070,9 @@ might help (with 'rm \jobname.?? \jobname.??s')%
#2% Output the suffix in any case.
}
-% This is the macro invoked by entries in the aux file. Define a control
-% sequence for a cross-reference target (we prepend XR to the control sequence
-% name to avoid collisions). The value is the page number. If this is a float
+% This is the macro invoked by entries in the aux file. Define a control
+% sequence for a cross-reference target (we prepend XR to the control sequence
+% name to avoid collisions). The value is the page number. If this is a float
% type, we have more work to do.
%
\def\xrdef#1#2{%
@@ -9088,10 +9088,10 @@ might help (with 'rm \jobname.?? \jobname.??s')%
\bgroup
\expandafter\gdef\csname XR\safexrefname\endcsname{#2}%
\egroup
- % We put the \gdef inside a group to avoid the definitions building up on
- % TeX's save stack, which can cause it to run out of space for aux files with
+ % We put the \gdef inside a group to avoid the definitions building up on
+ % TeX's save stack, which can cause it to run out of space for aux files with
% thousands of lines. \gdef doesn't use the save stack, but \csname does
- % when it defines an unknown control sequence as \relax.
+ % when it defines an unknown control sequence as \relax.
%
% Was that xref control sequence that we just defined for a float?
\expandafter\iffloat\csname XR\safexrefname\endcsname
@@ -9450,7 +9450,7 @@ might help (with 'rm \jobname.?? \jobname.??s')%
%
\ifimagevmode
\medskip % space after a standalone image
- \fi
+ \fi
\ifx\centersub\centerV \egroup \fi
\endgroup}
@@ -10281,7 +10281,7 @@ directory should work if nowhere else does.}
\uppercase{.}
\endgroup
\else
- \errhelp = \EMsimple
+ \errhelp = \EMsimple
\errmessage{Unicode character U+#1 not supported, sorry}%
\fi
\else
@@ -10314,7 +10314,7 @@ directory should work if nowhere else does.}
\countUTFz = "#1\relax
\begingroup
\parseXMLCharref
-
+
% Give \u8:... its definition. The sequence of seven \expandafter's
% expands after the \gdef three times, e.g.
%
@@ -10326,7 +10326,7 @@ directory should work if nowhere else does.}
\expandafter\expandafter
\expandafter\expandafter
\expandafter\gdef \UTFviiiTmp{#2}%
- %
+ %
\expandafter\ifx\csname uni:#1\endcsname \relax \else
\message{Internal error, already defined: #1}%
\fi
@@ -10365,7 +10365,7 @@ directory should work if nowhere else does.}
\divide\countUTFz by 64
\countUTFy = \countUTFz % Save to be the future value of \countUTFz.
\multiply\countUTFz by 64
-
+
% \countUTFz is now \countUTFx with the last 5 bits cleared. Subtract
% in order to get the last five bits.
\advance\countUTFx by -\countUTFz
@@ -10400,7 +10400,7 @@ directory should work if nowhere else does.}
% U+0080..U+00FF = https://en.wikipedia.org/wiki/Latin-1_Supplement_(Unicode_block)
% U+0100..U+017F = https://en.wikipedia.org/wiki/Latin_Extended-A
% U+0180..U+024F = https://en.wikipedia.org/wiki/Latin_Extended-B
-%
+%
% Many of our renditions are less than wonderful, and all the missing
% characters are available somewhere. Loading the necessary fonts
% awaits user request. We can't truly support Unicode without
@@ -11438,9 +11438,9 @@ directory should work if nowhere else does.}
\def\texinfochars{%
\let< = \activeless
\let> = \activegtr
- \let~ = \activetilde
+ \let~ = \activetilde
\let^ = \activehat
- \markupsetuplqdefault \markupsetuprqdefault
+ \markupsetuplqdefault \markupsetuprqdefault
\let\b = \strong
\let\i = \smartitalic
% in principle, all other definitions in \tex have to be undone too.
generated by cgit v1.2.3 (git 2.39.1) at 2024-10-31 13:41:18 +0000