summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/tex/latex/kluwer/klu10.clo
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/tex/latex/kluwer/klu10.clo')
-rw-r--r--Master/texmf-dist/tex/latex/kluwer/klu10.clo253
1 files changed, 253 insertions, 0 deletions
diff --git a/Master/texmf-dist/tex/latex/kluwer/klu10.clo b/Master/texmf-dist/tex/latex/kluwer/klu10.clo
new file mode 100644
index 00000000000..ba1a9702ee7
--- /dev/null
+++ b/Master/texmf-dist/tex/latex/kluwer/klu10.clo
@@ -0,0 +1,253 @@
+%
+%
+\ifcat a\noexpand @\let\next\relax\else \def\next{%
+\documentclass[10pt]{kluwer}\usepackage{doc}\MakePercentIgnore}\fi\next
+\NeedsTeXFormat{LaTeX2e}
+\def\filedate{1998/02/11}
+\def\filename{klu10.clo}
+%\DoNotIndex{\@M,\def,\c@secnumdepth,\baselineskip,\p@,\else,\fi}
+%\DoNotIndex{\newcommand,\z@,\relax,\renewcommand,\ifnum,\csname,\endcsname}
+%\DoNotIndex{\baselineskip,\vskip,\hskip,\relax,\secdef,\refstepcounter}
+%\DoNotIndex{\setlength,\@plus,\@minus,\protect,\endinput}
+%\CodelineIndex
+%\newcommand{\Bs}{}
+%\parindent=0pt
+%\parskip=3pt
+%\setlength\marginparwidth{.5in}
+%\hfuzz=10pt
+%\MakeShortVerb{\|}
+%\addtolength{\textwidth}{4pc}
+%\begin{document}
+%\begin{opening}
+%\title{\filename}
+%\date{\filedate}
+%\author{Kluwer Academic Publishers\surname{}}
+%\institute{~}
+%\begin{abstract}
+% This internal file takes care of list definitions and `general'
+% point size options.
+%\end{abstract}
+%\end{opening}
+%\tableofcontents
+%\newpage\section{Implementation}
+% \begin{macrocode}
+\ProvidesFile{klu10.clo}[\filedate ]
+% \end{macrocode}
+% \subsection{Section size commands}
+% added command: |\little|. This between |\scriptsize| and
+% |\tiny|. Allowed type provided values: 5/6, 6/7, 7/8, 8/9.5, 9/11,
+% 10/12, 12/14, 14/18, 17/22, 20/25, 25/30.
+% \begin{macrocode}
+\renewcommand\normalsize{%
+ \@setfontsize\normalsize\@xpt\@xiipt
+ \abovedisplayskip 10\p@ \@plus 2\p@ \@minus5\p@
+ \abovedisplayshortskip \z@ \@plus 3\p@
+ \belowdisplayshortskip 6\p@ \@plus 3\p@ \@minus3\p@
+ \belowdisplayskip \abovedisplayskip
+ \let\@listi\@listI}
+\normalsize
+\newcommand\small{%
+ \@setfontsize\small\@ixpt{11}%
+ \abovedisplayskip 8.5\p@ \@plus3\p@ \@minus4\p@
+ \abovedisplayshortskip \z@ \@plus2\p@
+ \belowdisplayshortskip 4\p@ \@plus2\p@ \@minus2\p@
+ \def\@listi{\leftmargin\leftmargini
+ \topsep 4\p@ \@plus2\p@ \@minus2\p@
+ \parsep 2\p@ \@plus\p@ \@minus\p@
+ \itemsep \parsep}%
+ \belowdisplayskip \abovedisplayskip
+}
+\newcommand\footnotesize{%
+ \@setfontsize\footnotesize\@viiipt{9.5}%
+ \abovedisplayskip 6\p@ \@plus2\p@ \@minus4\p@
+ \abovedisplayshortskip \z@ \@plus\p@
+ \belowdisplayshortskip 3\p@ \@plus\p@ \@minus2\p@
+ \def\@listi{\leftmargin\leftmargini
+ \topsep 3\p@ \@plus\p@ \@minus\p@
+ \parsep 2\p@ \@plus\p@ \@minus\p@
+ \itemsep \parsep}%
+ \belowdisplayskip \abovedisplayskip
+}
+\newcommand\scriptsize{\@setfontsize\scriptsize\@viipt\@viiipt}
+\newcommand\little{\@setfontsize\little\@vipt\@viipt}
+\newcommand\tiny{\@setfontsize\tiny\@vpt\@vipt}
+\newcommand\large{\@setfontsize\large\@xiipt{14}}
+\newcommand\Large{\@setfontsize\Large\@xivpt{18}}
+\newcommand\LARGE{\@setfontsize\LARGE\@xviipt{22}}
+\newcommand\huge{\@setfontsize\huge\@xxpt{25}}
+\newcommand\Huge{\@setfontsize\Huge\@xxvpt{30}}
+% \end{macrocode}
+% \subsection{Various values}
+% Note that |\hoffset| and |\voffset| are both compensated. This makes
+% the calculations below easier.
+% \begin{macrocode}
+\setlength\hoffset{-1in}
+\setlength\voffset{0pt}
+\setlength\parindent {14\p@}
+\setlength\headheight{12\p@}
+\setlength\headsep {12\p@}
+\setlength\topskip {10\p@}
+\setlength\footskip {27.5\p@}
+\setlength\marginparsep{10pt}
+\setlength\marginparpush{5\p@}
+\setlength\maxdepth {.5\topskip}
+\setlength\@maxdepth\maxdepth
+\setlength\columnsep{10pt}
+\setlength\columnseprule{0pt}
+\setlength\fboxsep{3pt}
+\setlength\fboxrule{.4pt}
+% \end{macrocode}
+% \subsection{Textheight and textwidth}
+% These are the main reason for the existence of these files. For some
+% stupid reason, \LaTeX\ calculates textwidth out of |\paperwidth|. We
+% did want to support letter paper, but our |\textwidth| is fixed,
+% with the margins being calculated.
+%
+% Presume |\textwidth| and |\marginparwidth| are set in the stylefile,
+% or we're in trouble. The |2pc| value is used to
+% compensate for the `dead' corners in most laserprinters.
+%
+% Calculations are done `AtBeginDocument' to allow changes made in the
+% preamble and later on in the stylefile.
+% \begin{macrocode}
+\newdimen\id@boxheight
+\AtBeginDocument{%
+ \setlength\@tempdima{\paperwidth}%
+ \addtolength\@tempdima{-\textwidth}%
+ \divide\@tempdima by 2
+ \setlength\@tempdimb\marginparwidth
+ \addtolength\@tempdimb\marginparsep
+ \addtolength\@tempdimb{2pc}%
+ \ifdim \@tempdima <\@tempdimb
+ \@settopoint\@tempdimb
+ \GenericError{Pointsize}{Pointsize Error: Marginpars disabled}{}{You made
+ your \string\textwidth\space (\the\textwidth) and
+ \string\marginparwidth (\the\marginparwidth) too wide.\MessageBreak
+ The allowed value for margin space: (\the\@tempdima). Needed value:
+ (\the\@tempdimb).\MessageBreak
+ This is not enough,
+ so I will set \string\marginparwidth\space to 0pt.\MessageBreak
+ Let's hope that fixes it.
+ }%
+ \marginparwidth \z@
+ \marginparsep \z@
+ \fi
+ \ifdim \@tempdima <2pc
+ \@tempdimb=\paperwidth
+ \advance\@tempdimb by -4pc
+ \@settopoint\@tempdimb
+ \GenericError{Pointsize}{Pointsize Error: Invalid sizes given}{}{You
+ made your \string\textwidth\space (\the\textwidth)
+ wider than the available total\MessageBreak
+ (Which is: \the\@tempdimb). Please press X and try again.
+ }%
+ \fi
+ \oddsidemargin \@tempdima
+ \evensidemargin \@tempdima
+% \end{macrocode}
+% These calculations are a lot easier.
+% |\textheight| should have been set already. This does not check for the
+% correct placement of the identification line!!
+% \begin{macrocode}
+ \setlength\@tempdima{\paperheight}
+ \addtolength\@tempdima{-\footskip}
+ \addtolength\@tempdima{-\headheight}
+ \addtolength\@tempdima{-\headsep}
+ \setlength\@tempdimb{\@tempdima}
+ \addtolength\@tempdima{-\textheight}
+ \divide\@tempdima by 2
+ \ifdim \@tempdima <2pc
+ \advance\@tempdimb by -4pc
+ \@settopoint\@tempdimb
+ \GenericError{Pointsize}{Pointsize Error: Invalid sizes given}{}{You
+ made your \string\textheight\space (\the\textheight)
+ more than the available total.\MessageBreak
+ (Which is: \the\@tempdimb). Please press X and try again.
+ }%
+ \fi
+ \setlength\topmargin{0pt}
+ \setlength\id@boxheight{\@tempdima}
+ \advance\id@boxheight by -2pc
+}
+% \end{macrocode}
+%
+% \begin{macrocode}
+\setlength\footnotesep{6.65\p@}
+\setlength{\skip\footins}{9\p@ \@plus 4\p@ \@minus 2\p@}
+% \end{macrocode}
+% \subsection{Lists}
+% List default values
+% \begin{macrocode}
+\setlength\partopsep{2\p@ \@plus 1\p@ \@minus 1\p@}
+\setlength{\leftmargini}{2em}
+\setlength{\leftmarginii}{2.2em}
+\setlength{\leftmarginiii}{1.87em}
+\setlength{\leftmarginiv}{1.7em}
+\setlength{\leftmarginv}{1em}
+\setlength{\leftmarginvi}{1em}
+\setlength{\labelsep}{.4em}
+\setlength{\labelwidth}{\leftmargini}
+\addtolength{\labelwidth}{-\labelsep}
+% \end{macrocode}
+% Note that lists below level 3 do nothing else then readjusting the
+% |\labelwidth|. This results in very small labels for the inner lists.
+% \begin{macrocode}
+\def\@listI{%
+ \leftmargin \leftmargini
+ \topsep 9\p@ \@plus 3\p@ \@minus 5\p@
+ \partopsep 3\p@ \@plus 1\p@ \@minus 2\p@
+ \itemsep 4.5\p@ \@plus 2\p@ \@minus 1\p@
+ \parsep 4.5\p@ \@plus 2\p@ \@minus 1\p@ }
+\def\@listii{%
+ \leftmargin \leftmarginii
+ \labelwidth \leftmarginii
+ \advance\labelwidth by -\labelsep
+ \topsep 4.5\p@ \@plus 2\p@ \@minus 1\p@
+ \parsep 2\p@ \@plus 1\p@ \@minus 1\p@
+ \itemsep \parsep}
+\def\@listiii{%
+ \leftmargin \leftmarginiii
+ \labelwidth \leftmarginiii
+ \advance\labelwidth by -\labelsep
+ \topsep 2\p@ \@plus 1\p@ \@minus 1\p@
+ \parsep \z@
+ \partopsep 1\p@ \@plus 0\p@ \@minus 1\p@
+ \itemsep \topsep}
+\def\@listiv{%
+ \setlength{\leftmargin}{\leftmarginiv}%
+ \setlength{\labelwidth}{\leftmarginiv}%
+ \addtolength{\labelwidth}{-\labelsep}}
+\def\@listv{%
+ \setlength{\leftmargin}{\leftmarginv}%
+ \setlength{\labelwidth}{\leftmarginv}%
+ \addtolength{\labelwidth}{-\labelsep}}
+\def\@listvi{%
+ \setlength{\leftmargin}{\leftmarginvi}%
+ \setlength{\labelwidth}{\leftmarginvi}%
+ \addtolength{\labelwidth}{-\labelsep}}
+\let\@listi\@listI
+\@listi
+% \end{macrocode}
+% \subsection{Float separation parameters}
+% Separation on text pages.
+% \begin{macrocode}
+\setlength\floatsep{12\p@ \@plus 2\p@ \@minus 2\p@}
+\setlength\textfloatsep{20\p@ \@plus 2\p@ \@minus 4\p@}
+\setlength\intextsep{12\p@ \@plus 2\p@ \@minus 2\p@}
+\setlength\dblfloatsep{12\p@ \@plus 2\p@ \@minus 2\p@}
+\setlength\dbltextfloatsep{20\p@ \@plus 2\p@ \@minus 4\p@}
+% \end{macrocode}
+% Separation on float pages
+% \begin{macrocode}
+\setlength\@fptop{0\p@ \@plus 1fil}
+\setlength\@fpsep{8\p@ \@plus 2fil}
+\setlength\@fpbot{0\p@ \@plus 1fil}
+\setlength\@dblfptop{0\p@ \@plus 1fil}
+\setlength\@dblfpsep{8\p@ \@plus 2fil}
+\setlength\@dblfpbot{0\p@ \@plus 1fil}
+
+\endinput
+% \end{macrocode}
+%\PrintIndex
+%\end{document}
+%% End of file `klu10.clo'.