summaryrefslogtreecommitdiff
path: root/Master/texmf-dist/tex/generic/pstricks/config/xdvipdfmx.cfg.orig
diff options
context:
space:
mode:
Diffstat (limited to 'Master/texmf-dist/tex/generic/pstricks/config/xdvipdfmx.cfg.orig')
-rw-r--r--Master/texmf-dist/tex/generic/pstricks/config/xdvipdfmx.cfg.orig244
1 files changed, 0 insertions, 244 deletions
diff --git a/Master/texmf-dist/tex/generic/pstricks/config/xdvipdfmx.cfg.orig b/Master/texmf-dist/tex/generic/pstricks/config/xdvipdfmx.cfg.orig
deleted file mode 100644
index 75a596ca353..00000000000
--- a/Master/texmf-dist/tex/generic/pstricks/config/xdvipdfmx.cfg.orig
+++ /dev/null
@@ -1,244 +0,0 @@
-% $Id: xdvipdfmx.cfg 4 2020-06-09 08:32:19Z herbert $
-%
-%% BEGIN: pstricks.con (for xdvipdfmx driver)
-%%
-%% Configuration file for PSTricks
-%%
-%% Version 0.05 (2015/09/11)
-%%
-%% For use with xdvipdfmx
-%% Created by SMiyata based on standard pstricks.con from TeXLive distribution.
-%% This file may be distributed, used and modified freely.
-%% Modified by Denis Girou, Herbert Voss
-%%
-\def\pstdriver{xdvipdfmx}%
-\def\pstverb#1{\special{pst: #1}}% Check catcode of "
-\def\pstunit{1bp}%
-\def\pstVerb#1{\immediate\special{PST: #1}}%
-\def\pstverbscale{72.27 72 div dup scale }%
-\def\pstnodescale{72 72.27 div dup scale }%
-% DG/SR modification begin - Apr. 28, 1997 (D. Carlisle + S. Rahtz)
-% \def\pstheader#1{\special{header=#1}}
-% We used to check for |\AtBeginDvi|, but that was broken in early release
-% so we now check for the existence of |\textsuperscript| (added 1995/05/16)
-\ifx\textsuperscript\@undefined
- \def\pstheader#1{\special{header=#1}}%
-\else
- \ifx\Gin@PS@file@header\@undefined
- \def\pstheader#1{\AtBeginDvi{\special{header=#1}}}%
- \else
- \let\pstheader\Gin@PS@file@header%
- \fi
-\fi
-% DG/SR modification end
-%
-%%
-%%
-%% In the following, CP is short for currentpoint.
-%% The neg is necessary because dvips scales the coordinates by 1 -1.
-%% \tx@NET means neg exch neg exch translate.
-\def\pstrotate{CP CP translate 3 -1 roll neg rotate \tx@NET}%
-%%
-%% ****************** END xdvipdfmx *****************************
-
-
-%%%%%%%%%%%%%%%%%%% !! CUSTOMIZATION STUFF GOES HERE: !! %%%%%%%%%%%%%%%%%%
-%% If you want to include your own customizations to pstricks.tex, then
-%% uncomment the \pstcustomize command, and include your modifications
-%% after \pstcustomize. These will be read in after pstricks.tex.
-\def\c@lor@to@ps#1 #2\@@{\csname c@lor@ps@#1\endcsname#2 \@@}%
-\def\c@lor@ps@#1 #2\@@{TeXDict begin #1 end}%
-\def\c@lor@ps@rgb#1\@@{#1 setrgbcolor}%
-\def\c@lor@ps@hsb#1\@@{#1 sethsbcolor}%
-\def\c@lor@ps@cmyk#1\@@{#1 setcmykcolor}%
-\def\c@lor@ps@gray#1\@@{#1 setgray}%
-\pstcustomize
-\typeout{Using PSTricks configuration for XeTeX+xdvipdfmx}%
-\def\@@scalebox{%
- \leavevmode
- \hbox{%
-\ifdim\pst@tempd\p@<\z@
-\pst@dimg=\pst@tempd\ht\pst@hbox
-\pst@dimh=\pst@tempd\dp\pst@hbox
-\dp\pst@hbox=-\pst@dimg
-\ht\pst@hbox=-\pst@dimh
-\else
-\ht\pst@hbox=\pst@tempd\ht\pst@hbox
-\dp\pst@hbox=\pst@tempd\dp\pst@hbox
-\fi
-\pst@dima=\pst@tempc\wd\pst@hbox
-\ifdim\pst@dima<\z@\kern-\pst@dima\fi
-\special{x: bscale \pst@tempc \pst@tempd}%
-\hbox to \z@{\box\pst@hbox\hss}%
-\special{x: escale}%
-\ifdim\pst@dima>\z@\kern\pst@dima\fi}}%
-%
-\let\ps@@scalebox\@@scalebox
-\def\ps@rotateleft#1{%
-\leavevmode\hbox{\hskip\ht#1\hskip\dp#1\vbox{\vskip\wd#1%
-\pst@Verb{90 \tx@RotBegin}%
-\vbox to \z@{\vss\hbox to \z@{\box#1\hss}\vskip\z@}%
-\pst@Verb{\tx@RotEnd}}}}%
-%
-\def\ps@rotateright#1{%
- \leavevmode\hbox{%
- \hskip\ht#1\hskip\dp#1\vbox{\vskip\wd#1%
- \pst@Verb{-90 \tx@RotBegin}%
- \vbox to \z@{\hbox to \z@{\hss\box#1}\vss}%
- \pst@Verb{\tx@RotEnd}}}}%
-%
-\def\ps@rotatedown#1{%
-\hbox{\hskip\wd#1\vbox{\vskip\ht#1\vskip\dp#1%
-\pst@Verb{180 \tx@RotBegin}%
-\vbox to \z@{\hbox to \z@{\box#1\hss}\vss}%
-\pst@Verb{\tx@RotEnd}}}}%
-%
-\def\begin@psclip{\special{x: gsave}}%
-\def\end@psclip{\special{x: grestore}}%
-\def\@newcolor#1#2#3{%
-\expandafter\edef\csname #1\endcsname{\noexpand\pst@color{#2}}%
-\expandafter\edef\csname\string\color@#1\endcsname{#2}% hv 1.14 2005-12-17
-\expandafter\edef\csname\string\color@xetex@#1\endcsname{#3}%
-\ignorespaces}%
-%
-\def\newgray#1#2{%
- \pst@checknum{#2}\pst@tempg
- \@newcolor{#1}{\pst@tempg setgray}{gray \pst@tempg}%
-}
-\def\newrgbcolor#1#2{%
- \pst@expandafter\pst@getnumiii{#2} {} {} {} {}\@nil
- \@newcolor{#1}{\pst@tempg \pst@temph \pst@tempi setrgbcolor}{rgb \pst@tempg \pst@temph \pst@tempi}%
-}%
-\def\newhsbcolor#1#2{%
- \pst@expandafter\pst@getnumiii{#2} {} {} {} {}\@nil
- \@newcolor{#1}{\pst@tempg \pst@temph \pst@tempi sethsbcolor}{hsb \pst@tempg \pst@temph \pst@tempi}%
-}%
-\def\newcmykcolor#1#2{%
- \pst@expandafter\pst@getnumiv{#2} {} {} {} {} {}\@nil
- \@newcolor{#1}{\pst@tempg \pst@temph \pst@tempi \pst@tempj setcmykcolor}%
- {cmyk \pst@tempg \pst@temph \pst@tempi \pst@tempj}%
-}%
-\newgray{black}{0}%
-\newgray{darkgray}{.25}%
-\newgray{gray}{.5}%
-\newgray{lightgray}{.75}%
-\newgray{white}{1}%
-\newrgbcolor{red}{1 0 0}%
-\newrgbcolor{green}{0 1 0}%
-\newrgbcolor{blue}{0 0 1}%
-\newrgbcolor{yellow}{1 1 0}%
-\newrgbcolor{cyan}{0 1 1}%
-\newrgbcolor{magenta}{1 0 1}%
-
-\@ifundefined{LaTeXe}%
- {\def\current@@@@color{\csname\string\color@xetex@\psfillcolor\endcsname}}{%
- \AtBeginDocument{\@ifpackageloaded{xcolor}{\def\current@@@@color{\psfillcolor}}%
- {\def\current@@@@color{\csname\string\color@\psfillcolor\endcsname}}}}%
-%
-\iffalse
-\def\pst@starbox{%
-\setbox\pst@hbox\hbox{{%
- \def\current@color{\current@@@@color}%
-\dimen@\wd\pst@hbox\advance\dimen@2\psframesep\wd\pst@hbox\dimen@%
-\dimen@\ht\pst@hbox\advance\dimen@\psframesep\ht\pst@hbox\dimen@%
-\dimen@\dp\pst@hbox\advance\dimen@\psframesep\dp\pst@hbox\dimen@%
-\@ifundefined{LaTeXe}{\special{color push \current@color}%
- \rlap{\vrule width\wd\pst@hbox height\ht\pst@hbox depth\dp\pst@hbox}%
- \special{color pop}}%
- {\color@block{\wd\pst@hbox}{\ht\pst@hbox}{\dp\pst@hbox}}}%
-\rlap{\hskip\psframesep\unhbox\pst@hbox}}}
-\fi
-%
-\def\AltClipMode{}%
-%
-\def\putoverlaybox#1{%
-\hbox{\special{x: gsave}\special{x: initoverlay #1}\copy\theoverlaybox\special{x: grestore}}}%
-%
-\def\pst@overlay#1{\edef\curr@overlay{#1}\special{x: clipoverlay #1}\aftergroup\pst@endoverlay}%
-\def\pst@endoverlay{\special{x: clipoverlay \curr@overlay}}%
-\def\AltOverlayMode{}%
-%The next line is not necessary, if pstricks.sty of [2007/02/18 v0.33] or newer is used.
-\@ifundefined{LaTeXe}{}{\AtBeginDocument{\psset{fillcolor=white}}}%
-%
-\endinput
-%
-%
-%%%%%%%%%%%%%%%% DESCRIPTION OF CONFIGURATION DEFINITIONS %%%%%%%%%%%%%%%
-
-Here are the commands that must be defined in this file:
-
- \pstverb{} - The argument is included as verbatim PostScript,
- grouped by save and restore. The coordinate system
- should be square, not rotated, and with the origin
- at TeX's currentpoint.
-
- \pstVerb{} - The argument is included as verbatim PostScript, not
- grouped by (g)save and (g)restore. The currentpoint
- should be TeX's currentpoint.
-
- \pstunit - The units used by driver for graphics included with
- \pstverb. Probably 1bp or 1sp.
-
- \pstverbscale - The PostScript code that scales the coordinate system
- from that in effect with \pstVerb to that in effect
- with \pstverb. Should not translate to the currentpoint.
-
- \pstrotate - The PostScript code that takes a number off the stack
- and rotates the axes properly. I.e.,
- \pstVerb{angle \pstrotate} is used to begin rotations.
-
- \pstheader{} - The argument is a header file (e.g., .pro file).
- If your driver does not support such a special, then
- the command might just remind you to include the header
- when printing. You can use PSTricks without a header,
- in which case it does not matter how you define
- \pstheader. See read-me.pst for details.
- If you cannot change the default directory where your
- driver looks for header files, and you cannot write to
- that directory, then you include the path for your
- PSTricks header files.
- E.g., \def\pstheader#1{\special{header=~/tex/#1}}.
-
- \pstdriver - The name of the driver.
-
-
-%%%%%%%%% !! HOW TO MAKE A TEX FORMAT WITH PSTRICKS PRELOADED !! %%%%%%%%
-
-See your local TeX documentation for instructions on creating a TeX format.
-
-Before making the format, be sure that this configuration file is correct.
-It will be read only when creating the format, and not with every job.
-
-If you are not using header files, there are no more special instructions.
-
-Special instructions when using header files:
-
- - If you want to include supplementary PSTricks files (e.g., pst-node.tex),
- add \input commands in the customization section above.
-
- - If your definition of \pstheader is, e.g.
-
- \def\pstheader#1{\special{\header=#1}}
-
- then change it to
-
- \def\pstheader#1{%
- \expandafter\everyjob\expandafter{\the\everyjob
- \special{header=#1}}}
-
- and put your original definition in the customization section, AFTER
- any \input commands. E.g., the customization section might look like:
-
- \pstcustomize
- \input pst-node.tex
- \input pst-coil.tex
- \def\pstheader#1{\special{header=#1}}
-
- - Input pstricks.tex at the appropriate time when creating the format.
- E.g., when initex stops running:
- *\input pstricks
- *\dump
-
-
-%%
-%% END: pstricks.con