diff options
Diffstat (limited to 'Master/texmf-dist/source')
-rw-r--r-- | Master/texmf-dist/source/latex/erdc/Makefile | 85 | ||||
-rw-r--r-- | Master/texmf-dist/source/latex/erdc/erdc.dtx | 1494 | ||||
-rw-r--r-- | Master/texmf-dist/source/latex/erdc/erdc.ins | 29 |
3 files changed, 1608 insertions, 0 deletions
diff --git a/Master/texmf-dist/source/latex/erdc/Makefile b/Master/texmf-dist/source/latex/erdc/Makefile new file mode 100644 index 00000000000..985a56b6e9c --- /dev/null +++ b/Master/texmf-dist/source/latex/erdc/Makefile @@ -0,0 +1,85 @@ +# +# Makefile for erdc package +# +# This file is in public domain +# +# $Id: Makefile,v 1.5 2009-07-02 16:11:45 boris Exp $ +# + +PACKAGE=erdc + +SAMPLES = sample.tex + +IMAGES = \ + red_corps_castle2.eps\ + nola.eps + +PDFIMAGES = ${IMAGES:%.eps=%.pdf} + +PDF = $(PACKAGE).pdf ${SAMPLES:%.tex=%.pdf} + +WD = $(shell pwd) +CURRDIR = $(notdir ${WD}) + + +all: ${PDF} ${PDFIMAGES} + + +%.pdf: %.dtx $(PACKAGE).cls ${PDFIMAGES} + pdflatex $< + - bibtex $* + pdflatex $< + - makeindex -s gind.ist -o $*.ind $*.idx + - makeindex -s gglo.ist -o $*.gls $*.glo + pdflatex $< + while ( grep -q '^LaTeX Warning: Label(s) may have changed' $*.log) \ + do pdflatex $<; done + + +%.cls: %.ins %.dtx + pdflatex $< + +%.pdf: %.tex $(PACKAGE).cls + pdflatex $< + - bibtex $* + pdflatex $< + pdflatex $< + while ( grep -q '^LaTeX Warning: Label(s) may have changed' $*.log) \ + do pdflatex $<; done + + +%.pdf: %.eps + epstopdf $< + + +.PRECIOUS: $(PACKAGE).cfg $(PACKAGE).cls + + +clean: + $(RM) $(PACKAGE).cls *.log *.aux \ + *.glo *.idx *.toc *.tbc \ + *.ilg *.ind *.out *.lof \ + *.lot *.bbl *.blg *.gls *.sty *.ist \ + *.dvi *.ps *.thm *.tgz *.zip + +distclean: clean + $(RM) $(PDF) $(PDFIMAGES) + +# +# Archive for the distribution. Includes typeset documentation +# +archive: all clean + cd ..; \ + tar -czvf $(PACKAGE).tgz --exclude 'debug*' \ + --exclude '*~' --exclude '*.tgz' --exclude '*.zip' \ + --exclude CVS $(CURRDIR); \ + mv $(PACKAGE).tgz $(CURRDIR); \ + cd $(CURRDIR) + + +zip: all clean + cd ..; \ + zip -r $(PACKAGE).zip $(CURRDIR) \ + -x 'debug*' -x '*~' -x '*.tgz' -x '*.zip' -x CVS -x 'CVS/*'; \ + mv $(PACKAGE).zip $(CURRDIR); \ + cd $(CURRDIR) diff --git a/Master/texmf-dist/source/latex/erdc/erdc.dtx b/Master/texmf-dist/source/latex/erdc/erdc.dtx new file mode 100644 index 00000000000..39ce67b3ba4 --- /dev/null +++ b/Master/texmf-dist/source/latex/erdc/erdc.dtx @@ -0,0 +1,1494 @@ +% \iffalse +% $Id: erdc.dtx,v 1.17 2009-03-20 20:13:31 boris Exp $ +% +% Copyright 2008, Boris Veytsman +% This work may be distributed and/or modified under the +% conditions of the LaTeX Project Public License, either +% version 1.3 of this license or (at your option) any +% later version. +% The latest version of the license is in +% http://www.latex-project.org/lppl.txt +% and version 1.3 or later is part of all distributions of +% LaTeX version 2005/12/01 or later. +% +% This work has the LPPL maintenance status `maintained'. +% +% The Current Maintainer of this work is Boris Veytsman, +% <borisv@lk.net> +% +% This work consists of the file erdc.dtx and the +% derived file erdc.cls +% +% \fi +% \CheckSum{984} +% +% +%% \CharacterTable +%% {Upper-case \A\B\C\D\E\F\G\H\I\J\K\L\M\N\O\P\Q\R\S\T\U\V\W\X\Y\Z +%% Lower-case \a\b\c\d\e\f\g\h\i\j\k\l\m\n\o\p\q\r\s\t\u\v\w\x\y\z +%% Digits \0\1\2\3\4\5\6\7\8\9 +%% Exclamation \! Double quote \" Hash (number) \# +%% Dollar \$ Percent \% Ampersand \& +%% Acute accent \' Left paren \( Right paren \) +%% Asterisk \* Plus \+ Comma \, +%% Minus \- Point \. Solidus \/ +%% Colon \: Semicolon \; Less than \< +%% Equals \= Greater than \> Question mark \? +%% Commercial at \@ Left bracket \[ Backslash \\ +%% Right bracket \] Circumflex \^ Underscore \_ +%% Grave accent \` Left brace \{ Vertical bar \| +%% Right brace \} Tilde \~} +% +%\iffalse +% Taken from xkeyval.dtx and amsdtx.dtx +%\fi +%\makeatletter +%\def\DescribeOption#1{\leavevmode\@bsphack +% \marginpar{\raggedleft\PrintDescribeOption{#1}}% +% \SpecialOptionIndex{#1}\@esphack\ignorespaces} +%\def\PrintDescribeOption#1{\strut\emph{option}\\\MacroFont #1\ } +%\def\SpecialOptionIndex#1{\@bsphack +% \index{#1\actualchar{\protect\ttfamily#1} +% (option)\encapchar usage}% +% \index{options:\levelchar#1\actualchar{\protect\ttfamily#1}\encapchar +% usage}\@esphack} +%\def\DescribeOptions#1{\leavevmode\@bsphack +% \marginpar{\raggedleft\strut\emph{options}% +% \@for\@tempa:=#1\do{% +% \\\strut\MacroFont\@tempa\SpecialOptionIndex\@tempa +% }}\@esphack\ignorespaces} +% \def\cls#1{\texttt{#1}} +% \def\cs#1{\textbackslash\texttt{#1}} +% \let\cn\cs +%\makeatother +% \newcommand{\progname}[1]{\textsf{#1}} +% +% \MakeShortVerb{|} +% \GetFileInfo{erdc.dtx} +% \title{\LaTeX{} Style For Technical Information +% Reports of the Engineer Research and +% Development Center +% \thanks{\copyright 2009, Boris Veytsman}} +% \author{Boris Veytsman\thanks{% +% \href{mailto:borisv@lk.net}{\texttt{borisv@lk.net}}, +% \href{mailto:boris@varphi.com}{\texttt{boris@varphi.com}}}} +% \date{\filedate, \fileversion} +% \maketitle +% \begin{abstract} +% This package provides class for typesetting Technical Information +% Reports of the Engineer Research and Development Center, US Army +% Corps of Engineers. +% \end{abstract} +% \tableofcontents +% +% \clearpage +% \changes{v0.1}{2009/03/20}{First fully functional version} +% +%\section{Introduction} +%\label{sec:intro} +% +% Technical publications for Engineer Research and Development Center, +% US Army Corps of Engineers follow an elaborate +% style~\cite{ERDC_Guide}. This style is accompanied by templates for +% a popular word processor software. In this class, commissioned by US +% Army Corps of Engineers, we try to recreate this style for \LaTeX. +% +% There are several kinds of documents described by~\cite{ERDC_Guide}: +% Technical Report, Technical Note, Miscellaneous Paper, Contract +% Report, Letter Report, Monograph, Special Report, Brochure. In this +% class we follow the guidelines for Technical Reports (TR). However, +% it can be used for other kinds of documents as long as they do not +% differ much from Technical Reports. +% +% +%\section{User Guide} +%\label{sec:user_guide} +% +% +% +%\subsection{Installation} +%\label{sec:ug_install} +% +% The class uses a number of \LaTeX{} packages. Normally they should be +% present in any up-to-date distribution. If you do not have them, +% you can download them using the links below prior to using the class. +% +% You will need \progname{PSFNSS}~\cite{Schmidt04:PSNFSS9.2}: the +% \LaTeX{} package providing the access to common PostScript fonts. +% Of course you will need the fonts themselves. You will also need +% \progname{graphics} bundle~\cite{Carlisle05:Graphics}, packages +% \progname{geometry}~\cite{Umeki08:Geometry}, +% \progname{caption}~\cite{Sommerfeldt07:Caption}, +% \progname{longtable}~\cite{Carlisle04:Longtable} and +% \progname{fancyhdr}~\cite{Oostrum04:Fancyhdr}. +% +% +% The installation of the class follows the usual +% practice~\cite{TeXFAQ} for \LaTeX{} packages: +% \begin{enumerate} +% \item Run \progname{latex} on |erdc.ins|. This will produce the +% \LaTeX{} class |erdc.cls|. +% \item Put the files |erdc.cls|, |red_corps_castle2.eps| and +% |red_corps_castle2.pdf| to the place where \LaTeX{} can find it +% (see \cite{TeXFAQ} or the documentation for your \TeX{} +% system).\label{item:install} +% \item Update the database of file names. Again, see \cite{TeXFAQ} +% or the documentation for your \TeX{} system for the system-specific +% details.\label{item:update} +% \item The file |erdc.pdf| provides the documentation for the +% package (this is the file you are probably reading now). +% \end{enumerate} +% As an alternative to items~\ref{item:install} and~\ref{item:update} +% you can just put the file |erdc.cls| in the working directory +% where your |.tex| file is. +% +% +%\subsection{Invocation} +%\label{sec:ug_invocation} +% +% To use the class, put in the preamble of your document +% \begin{flushleft} +% |\documentclass[|\meta{options}|]{erdc}| +% \end{flushleft} +% +% The class should work both with |latex| and |pdflatex| work flows. +% Accordingly it is supplied with US Army Corps of Engineers in both +% EPS and PDF formats. +% +% +% The class recoginzes the standard \LaTeX{} options, shared by the +% most document classes~\cite{Lamport94}. +% \DescribeOptions{8pt,9pt,10pt,11pt,12pt} The default font size +% changing options (|8pt|, |9pt|, \dots, |12pt|) have no effect other +% than producing a warning in the log since the font sizes of the +% class are fixed by the guidelines~\cite{ERDC_Guide}. +% +% +%\subsection{Front Matter} +%\label{sec:ug_frontmatter} +% +% \DescribeMacro{\frontmatter}. +% The command |\frontmatter| starts the \emph{Front Matter} of the +% document. This part includes title page, table of contents, list of +% figures, list of tables. +% +% \DescribeMacro{\laboratory} +% The cover page of the Technical Report should have the center name +% for Center-level reports or laboratory name for laboratory level +% reports. By default a technical report is assumed to be a +% Center-level one, and the center name (Engineering Research and +% Development Center) is printed in the cover page. The macro +% |\laboratory|\marg{Laboratory Name} overrides this default, for example: +% \begin{verbatim} +% \laboratory{Cold Regions Research and Engineering Laboratory} +% \end{verbatim} +% A line break command |\\| can be used inside this command to achieve +% a desirable line break in the laboratory name if the automatic one +% is not right. +% +% +% \DescribeMacro{\reportnum} +% The command |\reportnum|\marg{Report Number} is used to store the +% project number. For example, +% \begin{verbatim} +% \reportnum{ERDC/CRREL SR-05-78} +% \end{verbatim} +% The report number should include the laboratory abbreviation as its +% prefix. +% +% \DescribeMacro{\program} +% The command |\program|\marg{Program Title} is used to store the +% title of the program. For example, +% \begin{verbatim} +% \program{Military Engineering Technology} +% \end{verbatim} +% +% \DescribeMacro{\title} The command |\title| is used to store project +% name: |\title|\marg{Title}. For example: +% \begin{verbatim} +% \title{A New Project} +% \end{verbatim} +% +% \DescribeMacro{\subtitle} +% The command |\subtitle|\marg{Sub Title} us used to store the project +% subtitle. For example, +% \begin{verbatim} +% \subtitle{Model Investigation} +% \end{verbatim} +% +% \DescribeMacro{\date} +% The macro |\date| stores the date of the document, for example +% \begin{verbatim} +% \date{March 2009} +% \end{verbatim} +% +% +% \DescribeMacro{\author} +% \DescribeMacro{\affiliation} +% \DescribeMacro{\and} +% The macro |\author|\marg{Authors} stores the +% names of authors that share the same affiliation. The authors with +% the same affiliation +% should be listed in the same |\author| macro, separated by the +% keyword |\and|. Do not put commas and the word ``and'' between the +% authors' names: \LaTeX{} +% will take care of the proper punctuation. The macro +% |\affiliation|\marg{Affiliation} stores the affiliation of the +% authors immediately preceding this command. If a report is prepared +% by several laboratories, or a laboratory and an outside contractor, +% then you should list the authors with the same affiliation, then +% show the affiliation, then repeat for the next affiliation. For example: +% \begin{verbatim} +% \author{A. U. Thor \and C. O. R. Respondent \and C. O. Author} +% \affiliation{Construction Engineering Research Laboratory\\ +% U.S. Army Engineer Research and Development Center\\ +% 2902 Newmark Drive\\ +% Champaign, IL 61826-9005} +% \author{John M. Smith} +% \affiliation{Coastal and Hydraulics Laboratory\\ +% U.S. Army Engineer Research and Development Center\\ +% 3909 Halls Ferry Road\\ +% Vicksburg, MS 39180-6199} +% \end{verbatim} +% Note that the guidelines~\cite{ERDC_Guide} do not say how to typeset +% the authors that have several affiliations. Accordingly we do not +% deal with this case here. +% +% \DescribeMacro{\coverart} +% It is recommended to put some artwork on the cover of the title +% page. It is set up by +% the command |\coverart[|\meta{options}|]|\marg{file}. The syntax of the +% command is the same as the syntax of the command |\includegraphics| +% of the \progname{graphicx} package~\cite{Carlisle05:Graphics}. The +% obligatory argument \marg{file} is the name of the graphics file +% with the logo, and \oarg{options}, if present, may, for example, set +% the dimensions of the graphics. By default the graphics is scaled +% to cover the full width of the page. Note that our class uses the +% ``extended'' version \progname{graphicx} of the package with its +% ``key-value'' syntax. For example, +% \begin{verbatim} +% \coverart[width=2in]{red_corps_castle2.eps} +% \end{verbatim} +% The format of the graphics file depends on the \TeX{} engine used. +% If you use +% \progname{latex}$\to$\progname{dvips}$\to$\progname{pstopdf} route, +% then you need PostScript files (PS or EPS). If you use +% \progname{pdflatex} engine, then you need graphics files in JPEG, +% PNG or PDF formats (see~\cite{TeXFAQ} for more information). +% +% +% \DescribeMacro{\reporttype} +% The type of the report is stored in the macro +% |\reporttype|\marg{type}, for example: +% \begin{verbatim} +% \reporttype{Final Report} +% \end{verbatim} +% +% \DescribeMacro{\distribution} +% All reports should have a distribution statement. There are several +% standard distribution statements, approved by Department of Defense +% Directive~5230.24~\cite{DoD5230.24}. By default the reports have +% Statement~A: \emph{Approved for public release; distribution is +% unlimited.} To change the default, use the macro +% |\distribution|\marg{Distribution Statement}, for example +% \begin{verbatim} +% \distribution{Distribution authorized to U.S. Government Agencies +% only; Test and Evaluation; November 2005. Other requests should be +% referred to U.S. Army Engineer Research and Development Center} +% \end{verbatim} +% +% \DescribeMacro{\preparedfor} +% By default the reports have the phrase \emph{Prepared for U.S. Army +% Corps of Engineers, Washington, DC 20314-1000} on the title page. +% To change this designation, use the command |\preparedfor|, for +% example, +% \begin{verbatim} +% \preparedfor{U.S. Army Engineer Research and Development Center\\ +% 3909 Halls Ferry Road, Vicksburg, MS 39180-6199} +% \end{verbatim} +% To delete this phrase altogether, use |\preparedfor{}|. +% +% \DescribeMacro{\contractnum} +% Contract or work unit number is set by |\contractnum| command, for example +% \begin{verbatim} +% \contractnum{Work Unit 33143} +% \end{verbatim} +% +% \DescribeMacro{\monitoredby} +% Contract reports are monitored by a controlling laboratory. Its +% name and address is set by this command, for example +% \begin{verbatim} +% \monitoredby{U.S. Army Engineer Research and Development Center\\ +% 3909 Halls Ferry Road, Vicksburg, MS 39180-6199} +% \end{verbatim} +% +% +% +% \DescribeMacro{\additionalinfo} +% The command |\additionalinfo|\marg{Additional Information} is used +% to store additional information for the title page, for example, +% \begin{verbatim} +% \additionalinfo{Supercedes TR-2345-12345} +% \end{verbatim} +% +% \DescribeMacro{abstract} +% The abstract of the report is set using the environment |abstract|: +% \begin{verbatim} +% \begin{abstract} +% This report disusses spins of electrons, protons and other +% fermions. +% \end{abstract} +% \end{verbatim} +% +% \DescribeMacro{\disclaimer} +% By default all reports have the standard disclaimer. If its text +% should be changed for any reason, use the macro +% |\disclaimer|\marg{New Disclaimer}, for example +% \begin{verbatim} +% \disclaimer{The contents of this report are not to be used for +% advertising, publication, or promotional purposes. Citation of trade +% names does not constitute an official endorsement or approval of the +% use of such commercial products. All product names and trademarks +% cited are the property of their respective owners. The findings of +% this report are not to be construed as an official Department of the +% Army position unless so designated by other authorized documents. +% +% \textbf{DESTROY THIS REPORT WHEN NO LONGER NEEDED. DO NOT RETURN IT +% TO THE ORIGINATOR.}} +% \end{verbatim} +% +% +% \DescribeMacro{\maketitle} +% The command |\maketitle| typesets the cover page, title page and +% abstract page +% of the report based on the data supplied by the macros above. It +% should therefore be issued \emph{after} these macros. +% +% +% \DescribeMacro{\tableofcontents} +% \DescribeMacro{\listoffigures} +% \DescribeMacro{\listoftables} +% \DescribeMacro{\listoffiguresandtables} +% Table of contents is typeset with +% the usual \LaTeX{} command~\cite{Lamport94} |\tableofcontents|. +% This situation with the list of tables and the list of figures is +% slightly more involved. The guidelines~\cite{ERDC_Guide} require +% the authors to combine the lists into the common list called +% ``Figures and Tables'', which is subdivided into Figures and +% Tables. The heading of this joint list is a chapter heading, while +% the headings of the sublists are on the section level. However, the +% guidelines say nothing about the situation where a report has only +% figures or only tables. Therefore we chose the following solution: +% \begin{enumerate} +% \item If you have \emph{both} figures and tables, use +% |\listoffiguresandtables|. It will automatically typeset both +% lists according to the requirements~\cite{ERDC_Guide} +% \item If you have \emph{only} figures or \emph{only} tables, use either +% |\listoffigures| or |\listoftables| correspondingly. In this case +% the heading will be typeset on the chapter level. +% \item If you have neither (probably a rare situation), do not use +% any of these commands. +% \end{enumerate} +% +% \DescribeMacro{\chapter} +% In the front matter the command |\chapter| produces an +% \emph{unnumbered} chapter, so the commands |\chapter{Preface}| and +% |\chapter*{Preface}| give the same result (see also +% Section~\ref{sec:ug_mainmatter} below). +% +% +%\subsection{Main Matter} +%\label{sec:ug_mainmatter} +% +% \DescribeMacro{\mainmatter} +% The main matter starts with the macro |\mainmatter|. The text is +% divided into chapters, sections and subsections in the usual +% \LaTeX{} manner. +% All familiar \LaTeX{} commands and packages should work without +% problems. Note that unlike articles, reports have chapters as the +% highest subdivisions. The chapters are numbered, while sections and +% subsections are not. +% +% \DescribeMacro{\chapter} +% \DescribeMacro{\chapter*} +% One important difference between the standard \LaTeX{} and our class +% is the following. In standard \LaTeX{} the starred command +% |\chapter*| produces an unnumbered chapter, that does not go into +% the table of contents. In our class \emph{all} chapters, numbered +% or not, go into the table of contents. +% +% Tables should have the caption \emph{above} the tabular material +% rather than below it as in standard \LaTeX. The class automatically +% sets the proper spacing for this arrangement, but it is the user's +% responsibility to put the |\caption| command before the |tabular| +% environment, for example +% \begin{verbatim} +% \begin{table} +% \centering +% \caption{Yearly Dividens} +% \label{tab:dividends} +% \footnotesize\sffamily +% \begin{tabular}{|l|r|} +% \hline +% \bfseries Year & \bfseries Dividends, \%\\ +% \hline +% 1880 & 2.5 \\ +% \hline +% 1881 & 2.1 \\ +% \hline +% 1882 & 2.6 \\ +% \hline +% \end{tabular} +% \end{table} +% \end{verbatim} +% Note that the guidelines~\cite{ERDC_Guide} recommend excessive rules +% in the tables, with borders around the cells, as shown in the +% example above. This is usually frowned upon in the good typesetting +% practice. +% +% The guidelines~\cite{ERDC_Guide} recommend use footnotesize sans +% serif entries in the tables itself. The class does \emph{not} do +% this automatically: the users should put |\footnotesize\sffamily| +% before |\begin{tabular}|, as shown in the example above. +% +% \DescribeMacro{\fbox} +% The guidelines~\cite{ERDC_Guide} require the graphics to be +% surrounded by a hairline box. This is done by the standard |\fbox| +% command, for example +% \begin{verbatim} +% \begin{figure} +% \centering +% \fbox{\includegraphics[width=3in]{plot}} +% \caption{Plot of $f(x)$} +% \label{fig:plot} +% \end{figure} +% \end{verbatim} +% +% +%\subsection{Back Matter} +%\label{sec:ug_backmatter} +% +% \DescribeMacro{\appendix} +% Back matter in ERDC reports consists of +% the bibliography, appendices and distribution forms. The standard +% \LaTeX{} command |\appendix| changes the numeration of chapters +% according to the rules~\cite{ERDC_Guide}. It should be issued after +% the bibliography, but before the appendices. +% +% The guidelines~\cite{ERDC_Guide} do not formally specify all details +% of bibliographies. The authors are encouraged to use Bib\TeX{} +% and \progname{natbib}~\cite{Daly07:Natbib} package for the creation +% of professional-looking bibliographies. +% +% The reports should contain Form~298 (see, for example, +% \url{http://www.ntis.gov/pdf/rdpform.pdf}). This form should be +% typeset separately. +% +%\StopEventually{% +% \clearpage +% \bibliography{erdc} +% \bibliographystyle{unsrt}} +% \clearpage +%\section{Implementation} +%\label{sec:impl} +% +%\subsection{Identification} +%\label{sec:ident} +% +% We start with the declaration who we are. Most |.dtx| files put +% driver code in a separate driver file |.drv|. We roll this code into the +% main file, and use the pseudo-guard |<gobble>| for it. +% \begin{macrocode} +%<class>\NeedsTeXFormat{LaTeX2e} +%<*gobble> +\ProvidesFile{erdc.dtx} +%</gobble> +%<class>\ProvidesClass{erdc} +[2009/03/20 v0.1 Typesetting Technical Information Reports of +the Engineer Research and Development Center (ERDC), +US Army Corps of Engineers] +% \end{macrocode} +% +% And the driver code: +% \begin{macrocode} +%<*gobble> +\documentclass{ltxdoc} +\usepackage{array} +\usepackage{url,amsfonts} +\usepackage[breaklinks,colorlinks,linkcolor=black,citecolor=black, + pagecolor=black,urlcolor=black,hyperindex=false]{hyperref} +\PageIndex +\CodelineIndex +\RecordChanges +\EnableCrossrefs +\begin{document} + \DocInput{erdc.dtx} +\end{document} +%</gobble> +%<*class> +% \end{macrocode} +% +% +%\subsection{Options} +%\label{sec:options} +% +% \begin{macro}{\erdc@size@warning} +% The font-changing options are not used in our setup, so we just +% produce a warning: +% \begin{macrocode} +\long\def\erdc@size@warning#1{% + \ClassWarning{erdc}{Size-changing option #1 will not be + honored}}% +\DeclareOption{8pt}{\erdc@size@warning{\CurrentOption}}% +\DeclareOption{9pt}{\erdc@size@warning{\CurrentOption}}% +\DeclareOption{10pt}{\erdc@size@warning{\CurrentOption}}% +\DeclareOption{11pt}{\erdc@size@warning{\CurrentOption}}% +\DeclareOption{12pt}{\erdc@size@warning{\CurrentOption}}% +% \end{macrocode} +% \end{macro} +% +% All other options are just sent to the main class: +% \begin{macrocode} +\DeclareOption*{\PassOptionsToClass{\CurrentOption}{report}} +\ProcessOptions\relax +% \end{macrocode} +% +%\subsection{Loading Class and Packages} +%\label{sec:loading} +% +% We start with the base class and some packages +% \begin{macrocode} +\LoadClass[12pt,twoside]{report} +\RequirePackage{graphicx,color,caption,longtable} +% \end{macrocode} +% +%\subsection{Fonts} +%\label{sec:fonts} +% +% We use Times for the main font, matching Helvetica for +% the sans serifed font, and Courier for the monospaced font: +% \begin{macrocode} +\usepackage{mathptmx} +\usepackage[scaled]{helvet} +\usepackage{courier} +% \end{macrocode} +% +%\subsection{Page Dimensions and Paragraphing} +%\label{sec:page} +% +% +% The requirements are 1.25'' (top), 1'' (bottom), 1.5'' (left), and +% 1.5'' (right). However, we need to add for the headers. +% \begin{macrocode} +\RequirePackage[letterpaper, top=1in, bottom=1in, + left=1.5in, right=1.5in]{geometry} +% \end{macrocode} +% +% +% \begin{macro}{\parindent} +% The paragraphs have no indentation\dots +% \begin{macrocode} +\setlength{\parindent}{0pt} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\parskip} +% \dots and there is one baseline skip between paragraphs +% \begin{macrocode} +\setlength{\parskip}{\baselineskip} +% \end{macrocode} +% \end{macro} +% +%\subsection{Headers and Footers} +%\label{sec:headers} +% +% We use \progname{fancyhdr}: +% \begin{macrocode} +\RequirePackage{fancyhdr} +% \end{macrocode} +% +% +% \begin{macro}{\headrulewidth} +% \begin{macro}{\footrulewidth} +% Decorative rules: +% \begin{macrocode} +\renewcommand{\headrulewidth}{0.1pt} +\renewcommand{\footrulewidth}{0pt} +% \end{macrocode} +% \end{macro} +% \end{macro} +% \begin{macro}{\fancyhfoffset} +% Headers are wider than the text +% \begin{macrocode} +\fancyhfoffset{35pt} +% \end{macrocode} +% +% \end{macro} +% +% We do not have headers: +% \begin{macrocode} +\pagestyle{fancy} +\lhead{\textsf{\textbf{\footnotesize\@reportnum}}} +\rhead{\textsf{\textbf{\footnotesize\thepage}}} +\chead{} +% \end{macrocode} +% +% We do not have footers: +% \begin{macrocode} +\lfoot{} +\cfoot{} +\rfoot{} +% \end{macrocode} +% +% +% +%\subsection{Main Subdivisions} +%\label{sec:subdivisions} +% +% \begin{macro}{\if@frontmatter} +% The switch whether we are in the frontmatter +% \begin{macrocode} +\newif\if@frontmatter +\@frontmatterfalse +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\if@appendix} +% The switch whether we are in the appendix +% \begin{macrocode} +\newif\if@appendix +\@appendixfalse +% \end{macrocode} +% +% \end{macro} +% +% \begin{macro}{\frontmatter} +% Starting front matter +% \begin{macrocode} +\def\frontmatter{% + \pagenumbering{roman}% + \@frontmattertrue + \@appendixfalse} +% \end{macrocode} +% \end{macro} +% +% +% \begin{macro}{\mainmatter} +% Starting main matter +% \begin{macrocode} +\def\mainmatter{% + \cleardoublepage + \pagenumbering{arabic}% + \@frontmatterfalse + \@appendixfalse} +% \end{macrocode} +% \end{macro} +% +% +% \begin{macro}{\appendix} +% Start appendices +% \begin{macrocode} +\def\appendix{% + \clearpage + \@frontmatterfalse + \@appendixtrue + \@addtoreset{table}{chapter}% + \@addtoreset{equation}{chapter}% + \@addtoreset{figure}{chapter}% + \@addtoreset{section}{chapter}% + \setcounter{chapter}{0}% + \setcounter{section}{0}% + \gdef\@chapapp{\appendixname}% + \gdef\thechapter{\@Alph\c@chapter}% + \gdef\thefigure{\@Alph\c@chapter\@arabic\c@figure}% + \gdef\thetable{\@Alph\c@chapter\@arabic\c@table}% + \gdef\theequation{\@Alph\c@chapter\@arabic\c@equation}} +% \end{macrocode} +% +% \end{macro} +% +%\subsection{Cover and Title Pages} +%\label{sec:cover_title} +% +% +% +% +% \begin{macro}{\laboratory} +% This macro sets up the laboratory name: +% \begin{macrocode} +\def\laboratory#1{\gdef\@laboratory{#1}} +\laboratory{Engineer Research and\\Development Center} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\reportnum} +% Report number: +% \begin{macrocode} +\def\reportnum#1{\gdef\@reportnum{#1}} +\reportnum{ERDC TR-01-01} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\program} +% Program: +% \begin{macrocode} +\def\program#1{\gdef\@program{#1}} +\program{} +% \end{macrocode} +% \end{macro} +% +% +% \begin{macro}{\subtitle} +% Subtitle: +% \begin{macrocode} +\newcommand{\subtitle}[1]{\gdef\@subtitle{#1}} +\def\@subtitle{} +% \end{macrocode} +% \end{macro} +% +% +% The author and affiliation processing follows the ideas +% of~\cite{Downes04:amsart}. We lift most of the code from there. +% \begin{quotation} +% \em +% The general function to convert a list of items in the form +%\begin{verbatim} +% A\and B\and C\and D +%\end{verbatim} +% to the form `A, B, C, and D' is \cs{xandlist}: +%\begin{verbatim} +% \xandlist{, }{ and }{, and }{A\and B\and C\and D} +%\end{verbatim} +% This is a completely expandable macro, with the return value being +% the converted list. There is also a `no-execute' version whose +% fourth argument should be a macro; the text to be converted will be +% taken from that macro and after conversion will be put back as the +% macro's new replacement text. +%\begin{verbatim} +% \nxandlist{, }{ and }{, and }\result +%\end{verbatim} +% I don't think I want to explain this except by recommending that +% you watch it in operation with \cs{tracingmacros} if you're +% interested. [mjd,1994/10/19] +% \begin{macrocode} +\newcommand{\xandlist}[4]{\@andlista{{#1}{#2}{#3}}#4\and\and} +\def\@andlista#1#2\and#3\and{\@andlistc{#2}\@ifnotempty{#3}{% + \@andlistb#1{#3}}} +\def\@andlistb#1#2#3#4#5\and{% + \@ifempty{#5}{% + \@andlistc{#2#4}% + }{% + \@andlistc{#1#4}\@andlistb{#1}{#3}{#3}{#5}% + }} +\let\@andlistc\@iden +\newcommand{\nxandlist}[4]{% + \def\@andlistc##1{\toks@\@xp{\the\toks@##1}}% + \toks@{\toks@\@emptytoks \@andlista{{#1}{#2}{#3}}}% + \the\@xp\toks@#4\and\and + \edef#4{\the\toks@}% + \let\@andlistc\@iden} +% \end{macrocode} +% +% \begin{macro}{andify} +% +% The \cs{andify} function is provided as a convenient abbreviation +% for the most common case. See also \cs{author@andify} (for +% \cls{amsart} and \cls{amsproc} only), which gives better results +% in cases with a large number of authors. Provide a substitutable +% text string to simplify language-specific modifications. +% \begin{macrocode} +\def\@@and{and} +\newcommand{\andify}{% + \nxandlist{\unskip, }{\unskip{} \@@and~}{\unskip, \@@and~}} +% \end{macrocode} +% Override the funny default definition of \cn{and} from \LaTeX. +% This is not actually used by AMS classes, however. +% \begin{macrocode} +\def\and{\unskip{ }\@@and{ }\ignorespaces} +% \end{macrocode} +% \end{macro} +% \end{quotation} +% This requires some other AMS math macros: +% \begin{macrocode} +\let\@xp\expandafter\relax +\let\@nx=\noexpand +\def\@oparg#1[#2]{\@ifnextchar[{#1}{#1[#2]}} +\long\def\@ifempty#1{\@xifempty#1@@..\@nil} +\long\def\@xifempty#1#2@#3#4#5\@nil{% + \ifx#3#4\@xp\@firstoftwo\else\@xp\@secondoftwo\fi} +\long\def\@ifnotempty#1{\@ifempty{#1}{}} +\def\setboxz@h{\setbox\z@\hbox} +\def\@addpunct#1{% + \relax\ifhmode + \ifnum\spacefactor>\@m \else#1\fi + \fi} +\newtoks\@emptytoks +% \end{macrocode} +% +% +% \begin{macro}{\authors} +% The full authors lists +% \begin{macrocode} +\def\authors{} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\addresses} +% The list of authors \emph{and} addresses +% \begin{macrocode} +\def\addresses{} +% \end{macrocode} +% +% \end{macro} +% +% \begin{macro}{\author} +% This also follows AMS ideas +% \begin{macrocode} +\def\author#1{% + \ifx\@empty\authors\gdef\authors{#1}\else + \g@addto@macro{\authors}{\and#1}\fi + \ifx\@empty\@addresses\gdef\addresses{\author{#1}}\else + \g@addto@macro{\addresses}{\par\author{#1}}\fi} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\affiliation} +% And affiliation +% \begin{macrocode} +\def\affiliation#1{% + \ifx\@empty\@addresses\gdef\addresses{#1\par}\else + \g@addto@macro{\addresses}{#1\par\vspace{\baselineskip}}\fi} +% \end{macrocode} +% +% \end{macro} +% +% \begin{macro}{\today} +% We use only month and year in |\today|: +% \begin{macrocode} +\def\today{\ifcase\month\or + January\or February\or March\or April\or May\or June\or + July\or August\or September\or October\or November\or December\fi + \space \number\year} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\coverart} +% The |\logo| command has the same format as |\includegraphics|. It +% actually sets up |\includegraphics| in |\maketitle|. +% \begin{macrocode} +\newcommand{\coverart}[2][]{% + \def\@tempa{#1}% + \ifx\@empty\@tempa + \gdef\@coverart{\includegraphics[width=450\p@]{#2}}\else + \gdef\@coverart{\includegraphics[#1]{#2}}\fi} +\def\@coverart{}% +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\reporttype} +% Type of the report +% \begin{macrocode} +\def\reporttype#1{\gdef\@reporttype{#1}} +\reporttype{} +% \end{macrocode} +% \end{macro} +% +% +% \begin{macro}{\distribution} +% Distribution of the report +% \begin{macrocode} +\def\distribution#1{\gdef\@distribution{#1}} +\distribution{Approved for public release; distribution is unlimited.} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\preparedfor} +% The organization that ordered the report +% \begin{macrocode} +\def\preparedfor#1{\gdef\@preparedfor{#1}} +\preparedfor{U.S. Army Corps of Engineers\\ Washington, DC 20314-1000} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\contractnum} +% Contract number +% \begin{macrocode} +\def\contractnum#1{\gdef\@contractnum{#1}} +\contractnum{} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\monitoredby} +% Controlling lab +% \begin{macrocode} +\def\monitoredby#1{\gdef\@monitoredby{#1}} +\monitoredby{} +% \end{macrocode} +% \end{macro} +% +% +% \begin{macro}{\additionalinfo} +% Anything else on the title page +% \begin{macrocode} +\def\additionalinfo#1{\gdef\@additionalinfo{#1}} +\additionalinfo{} +% \end{macrocode} +% \end{macro} +% +% +% \begin{macro}{\abstract} +% We save abstract till later. Again, this is uses code +% from~\cite{Downes04:amsart}. +% \begin{macrocode} +\newbox\abstractbox +\renewenvironment{abstract}{% + \global\setbox\abstractbox=\vtop \bgroup + \normalfont + \list{}{\labelwidth\z@ + \leftmargin\z@ \rightmargin\leftmargin + \listparindent\z@ \itemindent\z@ + \parsep\z@ \topsep\z@ + \let\fullwidthdisplay\relax + }% + \item[\hskip\labelsep\bfseries Abstract:]% +}{% + \endlist\egroup} +% \end{macrocode} +% \end{macro} +% +% +% \begin{macro}{\disclaimer} +% And disclaimer +% \begin{macrocode} +\long\def\disclaimer#1{\long\gdef\@disclaimer{#1}} +\disclaimer{The contents of this report are not to be used for +advertising, publication, or promotional purposes. Citation of trade +names does not constitute an official endorsement or approval of the +use of such commercial products. All product names and trademarks +cited are the property of their respective owners. The findings of +this report are not to be construed as an official Department of the +Army position unless so designated by other authorized documents. + +\textbf{DESTROY THIS REPORT WHEN NO LONGER NEEDED. DO NOT RETURN IT +TO THE ORIGINATOR.}} +% \end{macrocode} +% \end{macro} +% +% +% \begin{macro}{@coverlist} +% The title page consists of boxes, which are extended beyond the +% margins. Here we define the margins +% \begin{macrocode} +\newenvironment{@coverlist}{\begin{list}{}{% + \leftmargin40\p@\rightmargin-100\p@% + \topsep\z@\partopsep\z@\labelwidth\z@\labelsep\z@}\item{}}{% + \end{list}} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{@titlelist} +% Similar to |@coverlist|, but for title page +% \begin{macrocode} +\newenvironment{@titlelist}{\begin{list}{}{% + \leftmargin-20\p@\rightmargin100\p@% + \topsep\z@\partopsep\z@\labelwidth\z@\labelsep\z@}\item{}}{% + \end{list}} +% \end{macrocode} +% \end{macro} +% +% +% \begin{macro}{\if@titleblock} +% Title block consists of Prepared for, Work Under and Monitored By +% statements. We need to decide whether to print it: +% \begin{macrocode} +\newif\if@titleblock +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{@titleblock} +% This is the macro for title block: +% \begin{macrocode} +\newenvironment{@titleblock}{% + \list{}{\labelwidth80\p@\labelsep10\p@ \leftmargin70\p@ + \rightmargin-150\p@ + \let\makelabel\@titleblocklabel}}{\endlist} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\@titleblocklabel} +% Small labels: +% \begin{macrocode} +\newcommand*{\@titleblocklabel}[1]{\hfill\small#1} +% \end{macrocode} +% +% \end{macro} +% +% \begin{macro}{\maketitle} +% The |\maketitle| macro performs all the work of typesetting the +% information above. +% +% First, we typeset the cover page +% \begin{macrocode} +\def\maketitle{% + \thispagestyle{empty}% + \enlargethispage{0.54in}% + \vspace*{-0.95in} + \makebox[0cm][r]{% + \raisebox{-720\p@}[\z@][\z@]{% + \rotatebox{90}{\makebox[\z@][l]{% + \colorbox{red}{\color{white}\parbox{720\p@}{% + \rule{0\p@}{85\p@}% + \hspace{28\p@}\raisebox{40\p@}{% + \parbox[c]{300\p@}{\LARGE\sffamily\@laboratory}% + \hspace{60\p@}% + \parbox[c]{300\p@}{\hfill\Large\sffamily\@reportnum}}}}}}}% + \hspace*{-14\p@}}% + \makebox[0cm][r]{\raisebox{-720\p@}[\z@][\z@]{\rule{8\p@}{726\p@}% + \hspace{-24\p@}}}% + \begin{@coverlist}% + \sffamily + \hfill\parbox{145\p@}{ + \includegraphics[width=65\p@]{red_corps_castle2}\\ + {\bfseries + US Army Corps\\ + of Engineers\raisebox{-1\p@}{\scriptsize\textregistered}}\\ + Engineering Research and\\ + Development Center}\par + \vspace{0.5cm}% + {\sffamily\itshape\@program\par}% + \vspace{0.3cm}% + {\raggedright\LARGE\bfseries\@title\par + \vspace{0.3cm}% + \normalsize\bfseries\@subtitle\par}% + \vspace{0.3cm}% + \begin{minipage}[t]{300\p@}\raggedright + \nxandlist{\unskip, }{\unskip{} \@@and~}{\unskip{} \@@and~}\authors + \authors\end{minipage}% + \begin{minipage}[t]{150\p@}\flushright\@date\end{minipage}\par + \vspace{0.3cm}% + \@coverart + \end{@coverlist}% + \vfill + \begin{@coverlist}% + \sffamily\small\@distribution + \end{@coverlist}% + \hbox{}\newpage\thispagestyle{empty}\hbox{}\newpage +% \end{macrocode} +% +% +% Now title page +% \begin{macrocode} +% + \thispagestyle{empty}% + \setcounter{page}{1}% + \begin{@titlelist}% + \sffamily + \begin{minipage}[t]{275\p@}% + \bfseries\@program + \end{minipage}% + \begin{minipage}[t]{175\p@}% + \bfseries\flushright\@reportnum\\\@date + \end{minipage}\par + \vspace*{1cm}% + {\bfseries\Large\@title\par} + {\bfseries\@subtitle\par} + \vspace*{0.3cm}% +% \end{macrocode} +% +% +% Inside title page we use special processing for authors' names +% \begin{macrocode} + \def\author##1{% + \def\@tempa{##1}% + \nxandlist{\unskip, }{\unskip{} \@@and~}{\unskip{} \@@and~}\@tempa + {\upshape\@tempa}\par}% + \textit{\addresses}\par + \vspace{0.3cm}% + \@reporttype\par + {\small\@distribution\par}% + \end{@titlelist}% + \vfill + \begin{@titlelist}% + \sffamily + \ifx\@additionalinfo\@empty\else\@additionalinfo\par\fi + \@titleblockfalse + \ifx\@empty\@preparedfor\relax\else\@titleblocktrue\fi + \ifx\@empty\@contractnum\relax\else\@titleblocktrue\fi + \ifx\@empty\@monitoredby\relax\else\@titleblocktrue\fi + \if@titleblock + \begin{@titleblock}% + \ifx\@empty\@preparedfor\else + \item[Prepared for]\@preparedfor + \fi + \ifx\@empty\@contractnum\else + \item[Under]\@contractnum + \fi + \ifx\@empty\@monitoredby\else + \item[Monitored by]\@monitoredby + \fi + \end{@titleblock} + \fi + \end{@titlelist}% + \clearpage +% \end{macrocode} +% +% +% Now half title page. Again see~\cite{Downes04:amsart} +% \begin{macrocode} + \ifvoid\abstractbox + \else + \box\abstractbox + \prevdepth\z@ + \fi + \vfill + \bgroup + \setlength{\fboxsep}{5\p@}% + \fbox{\parbox{\textwidth}{\fontsize{8.5\p@}{9.5\p@}\selectfont + \parskip\baselineskip + \textbf{Disclaimer:} \@disclaimer}}% + \egroup + \clearpage} +% \end{macrocode} +% \end{macro} +% +% +% +% +% +%\subsection{Sectioning} +%\label{sec:sectioning} +% +% \begin{macro}{\cl@chapter} +% We do \emph{not} reset any counters when stepping chapters, except +% in appendices: +% \begin{macrocode} +\def\cl@chapter{} +% \end{macrocode} +% +% \end{macro} +% +% +% \begin{macro}{\chapter} +% We redefine |\chapter| to suppress empty page style on chapter +% opening: +% \begin{macrocode} +\renewcommand\chapter{% + \clearpage + \global\@topnum\z@ + \@afterindentfalse + \secdef\@chapter\@schapter} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\@chapter} +% Non-starred chapter: +% \begin{macrocode} +\def\@chapter[#1]#2{% + \if@frontmatter + \addcontentsline{toc}{chapter}{#1}% + \@makechapterhead{#2}% + \else + \refstepcounter{chapter}% + \typeout{\@chapapp\space\thechapter.}% + \if@appendix + \addcontentsline{toc}{chapter}% + {\@chapapp\space\thechapter: #1}% + \@makechapterhead{\@chapapp\space\thechapter: #2}% + \else + \addcontentsline{toc}{chapter}% + {\protect\numberline{\thechapter}#1}% + \@makechapterhead{\thechapter\quad#2}% + \fi + \fi + \@afterheading} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\@schapter} +% Starred chapter: +% \begin{macrocode} +\def\@schapter#1{% + \if@appendix + \addcontentsline{toc}{chapter}{\@chapapp: #1}% + \@makechapterhead{\@chapapp: #1}% + \else + \addcontentsline{toc}{chapter}{#1}% + \@makechapterhead{#1}% + \fi + \@afterheading} +% \end{macrocode} +% \end{macro} +% +% +% \begin{macro}{\makechapterhead} +% This is the macro that actually prints the chapter: +% \begin{macrocode} +\def\@makechapterhead#1{% + \vspace*{15\p@}% + {\hskip-35\p@\parbox{\textwidth}{% + \parindent\z@\raggedright + \interlinepenalty\@M + \LARGE \bfseries\sffamily #1\par}\par\nobreak + \vspace*{10\p@}% + }} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\theequation} +% We do not use chapter number in equations, except in appendices: +% \begin{macrocode} +\renewcommand \theequation {\@arabic\c@equation} +% \end{macrocode} +% +% \end{macro} +% +% +% \begin{macro}{\thesection} +% We do not use chapter numbers in sections: +% \begin{macrocode} +\renewcommand \thesection {\@arabic\c@section} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{secnumdepth} +% We number only chapters and sections: +% \begin{macrocode} +\setcounter{secnumdepth}{1} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{tocdepth} +% Only chapters, sections, subsections are in TOC: +% \begin{macrocode} +\setcounter{tocdepth}{2} +% \end{macrocode} +% +% \end{macro} +% +% \begin{macro}{\section} +% Sections are in 12\,pt bold. +% \begin{macrocode} +\renewcommand\section{% + \addpenalty\@secpenalty\nobreak + \secdef\@section\@ssection} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\@section} +% This is for numbered sections: +% \begin{macrocode} +\def\@section[#1]#2{% + \addcontentsline{toc}{section}{#1}% + \hskip-35\p@\parbox{\textwidth}{\noindent\raggedright\interlinepenalty\@M + \large\sffamily\bfseries#2} + \@afterheading + \nobreak\par} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\@ssection} +% Unnumbered subsections are here only for compatibility +% \begin{macrocode} +\def\@ssection#1{\@section[#1]{#1}} +% \end{macrocode} +% \end{macro} +% +% +% \begin{macro}{\subsection} +% Subsections are also bold +% \begin{macrocode} +\renewcommand\subsection{\par + \addpenalty\@secpenalty\nobreak + \secdef\@subsection\@ssubsection} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\@subsection} +% Numbered subsections: +% \begin{macrocode} +\def\@subsection[#1]#2{% + \addcontentsline{toc}{subsection}{\itshape#1}% + {\noindent\raggedright\interlinepenalty\@M + \normalsize\sffamily\bfseries#2}\nobreak\par} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\@ssubsection} +% Unnumbered subsections are here for compatibility only +% \begin{macrocode} +\def\@ssubsection#1{\@subsection[#1]{#1}} +% \end{macrocode} +% \end{macro} +% +% +% +%\subsection{Special Chapters and Sections} +%\label{sec:special} +% +% Since our unnumbered sections go to the TOC, we need to have +% special ones that do not. +% +% \begin{macro}{\specialchapter} +% A chapter that does not go into TOC\dots +% \begin{macrocode} +\def\specialchapter#1{% + \clearpage + \global\@topnum\z@ + \@afterindentfalse + \@makechapterhead{#1}\par + \@afterheading} +% \end{macrocode} +% \end{macro} +% +% +% +%\subsection{Front Page Lists} +%\label{sec:frontlists} +% +% Here we define tables of contents, lists of figures, tables and the +% combined lists. +% +% \begin{macro}{\@dotsep} +% Separation between dots in tables +% \begin{macrocode} +\def\@dotsep{0.5} +% \end{macrocode} +% \end{macro} +% +% +% +% \begin{macro}{\l@chapter} +% Here we define chapter entry in TOC +% \begin{macrocode} +\renewcommand\l@chapter[2]{% + \addpenalty{-\@highpenalty}% + \vskip5\p@ + \bgroup + \parindent\z@\rightskip\@pnumwidth + \parfillskip-\@pnumwidth + \advance\leftskip2em\relax + \leavevmode\bfseries + \hskip-\leftskip + #1\nobreak\leaders\hbox{$\m@th\mkern\@dotsep + mu\hbox{.}\mkern\@dotsep + mu$}\hfill\nobreak\hb@xt@\@pnumwidth{\hfill#2}\par + \vskip5\p@ + \penalty\@highpenalty + \egroup} +% \end{macrocode} +% +% \end{macro} +% +% +% +% +% \begin{macro}{\tableofcontents} +% TOC: +% \begin{macrocode} +\renewcommand\tableofcontents{% + \specialchapter{\contentsname}% + \def\numberline##1{\hb@xt@\@pnumwidth{##1\hfill}}% + {\parskip2.5\p@\footnotesize\sffamily\@starttoc{toc}}} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\listoffigures} +% LOF: +% \begin{macrocode} +\renewcommand\listoffigures{% + \chapter{\listfigurename}% + \def\numberline##1{Figure ##1. }% + {\parskip2.5\p@\footnotesize\sffamily\@starttoc{lof}}} +% \end{macrocode} +% \end{macro} +% \begin{macro}{\listoftables} +% LOT: +% \begin{macrocode} +\renewcommand\listoftables{% + \chapter{\listtablename}% + \def\numberline##1{Table ##1. }% + {\parskip2.5\p@\footnotesize\sffamily\@starttoc{lot}}} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\listfiguretablename} +% The name for the combined list +% \begin{macrocode} +\def\listfiguretablename{Figures and Tables} +% \end{macrocode} +% +% \end{macro} +% +% \begin{macro}{\listoffiguresandtables} +% And the combined LOF and TOC +% \begin{macrocode} +\newcommand\listoffiguresandtables{% + \chapter{\listfiguretablename} + {\sffamily\bfseries\normalsize Figures\par}% + \def\numberline##1{Figure ##1. }% + {\parskip2.5\p@\footnotesize\sffamily\@starttoc{lof}}% + {\sffamily\bfseries\normalsize Tables\par}% + \def\numberline##1{Table ##1. }% + {\parskip2.5\p@\footnotesize\sffamily\@starttoc{lot}}} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\bibname} +% We use ``References'' for bibliography +% \begin{macrocode} +\renewcommand\bibname{References} +% \end{macrocode} +% +% \end{macro} +% +% +% +% +%\subsection{Figures and Tables} +%\label{sec:floats} +% +% +% \begin{macro}{\thefigure} +% We do not use chapter numbers in figures, except in appendix: +% \begin{macrocode} +\renewcommand \thefigure {\@arabic\c@figure} +% \end{macrocode} +% \end{macro} +% +% \begin{macro}{\thetable} +% We do not use chapter numbers in tables either: +% \begin{macrocode} +\renewcommand \thetable {\@arabic\c@table} +% \end{macrocode} +% \end{macro} +% +% +% Setting up captions: +% \begin{macrocode} +\captionsetup{justification=centering,font={footnotesize,sf,bf}, +labelsep=period} +\captionsetup[table]{position=top} +% \end{macrocode} +% +% +% \begin{macro}{\arraystretch} +% Increase array stretch: +% \begin{macrocode} +\def\arraystretch{1.3} +% \end{macrocode} +% +% \end{macro} +% +% +% \subsection{The final word} +%\label{sec:final} +% +% \begin{macrocode} +%</class> +% \end{macrocode} +% +%\Finale +%\clearpage +% +%\PrintChanges +%\clearpage +%\PrintIndex +% +\endinput diff --git a/Master/texmf-dist/source/latex/erdc/erdc.ins b/Master/texmf-dist/source/latex/erdc/erdc.ins new file mode 100644 index 00000000000..b4b2b6394d8 --- /dev/null +++ b/Master/texmf-dist/source/latex/erdc/erdc.ins @@ -0,0 +1,29 @@ +% +% Doctrip file for erdc +% This file is in public domain +% $Id: erdc.ins,v 1.1 2009-03-09 19:16:23 boris Exp $ +% +\def\batchfile{erdc.ins} +\input docstrip +\keepsilent +\showprogress + + +\askforoverwritefalse + +\generate{% + \file{erdc.cls}{\from{erdc.dtx}{class}}} + +\obeyspaces +\Msg{*****************************************************}% +\Msg{* Congratulations! You successfully generated the *}% +\Msg{* erdc package. *}% +\Msg{* *}% +\Msg{* Please move the file erdc.cls to a place where *}% +\Msg{* LaTeX files are stored on your system. The manual *}% +\Msg{* is erdc.pdf . *}% +\Msg{* *}% +\Msg{* The package is released under LPPL *}% +\Msg{* *}% +\Msg{* Happy TeXing! *}% +\Msg{*****************************************************}%
\ No newline at end of file |